PERFECT FIT FOR 2 OD-ID SLIP FIT CONNECTIONS - ROADFORMER 2 inch exhaust clamp is designed to connect 2 OD pipe into 2 ID pipe for exhaust pipe, muffler inlet, muffler outlet, elbow joint, catalytic converter, and exhaust system repair applications. STAINLESS STEEL NARROW BAND CLAMP - Made with a stainless steel band for strength, corrosion resistance, and long service life. The narrow band design provides a clean, compact fit while delivering strong sealing performance on exhaust connections. 360 CLAMPING WITHOUT PIPE DAMAGE - Roadformer Reaction Block Technology helps distribute clamping force evenly around the pipe, creating a secure seal while reducing the risk of pipe distortion, crushing, or damage to exhaust pipe ends. STRONG 10.9 GRADE BOLT FOR SECURE SEALING - Built with a 10.9 grade bolt to provide high clamping force for a tight, serviceable exhaust joint. Recommended working torque 4050 ft-lbs. For best sealing results, exhaust sealant may be applied before installation. EASY NO-WELD INSTALLATION, 2 PACK VALUE - Pre-attached hardware makes installation fast, accurate, and removable. No welding required. Each pack includes 2 pieces of 2 inch narrow band exhaust clamps for repair, replacement, and custom exhaust work.

Size joins 2.0 OD pipe to 2.0 OD pipe, width of strap 3inch 76.3mm.. Application Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.. Advantage No welding design, easy to install or remove.. Material 304 stainless steel band, zinc-plated M11 bolt and nut, steel gasket, aluminum alloy I-block.. Feature The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque 64 Nm..

Size Joins 3.0 ID malefemale flange to 3.0 OD pipe. T-Bolt thread size M81.25.. Advantage V-band clamp is easy to install and remove. The male and female flanges can be connected more stable, and provide a good seal with uniform pressure at the flange.. Feature Male and female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation.. Material 304 Stainless steel clamp and flanges,mild steel T-Bolt 304 stainless steel for long durability and reliability, corrosion resistance and high-temperature resistance.. Application Compatible for exhaust system, turbocharger, downpipe, muffler etc..

PERFECT FITMENT FOR 3 INCH SYSTEMS - Designed specifically for 3 OD exhaust piping, ensuring precise alignment between male and female flanges to eliminate misalignment and exhaust leakage.. QUICK RELEASE FOR EASY SERVICE MODIFICATION - The V-band design allows fast installation and removal without damaging pipes or gaskets, making it ideal for turbocharged, racing, and performance applications.. HEAVY-DUTY STAINLESS STEEL CONSTRUCTION - Manufactured from premium stainless steel with high-strength T-bolt and self-locking nut system, providing superior resistance to heat, corrosion, and vibration loosening.. COMPLETE 2-SET KIT FOR FULL INSTALLATION - Includes 2 full assemblies clamp male flange female flange, providing everything needed for a complete and secure exhaust connection.. WIDE APPLICATION RANGE - Perfect for exhaust systems, turbochargers, downpipes, mufflers, intercooler piping, and other high-pressure automotive performance systems.. PREMIUM HIGH QUALITY - Polished Finish and Precise Machining, 304 Stainless Steel Clamp and Flanges Silver Plating T bolt and very special self-locking Nut - all are made in high quality materials to ensure durability, reliability, leak-free and anti-corrosion even working in very hard environment.

SEALING Performance and Compact - This lap joint exhaust clamp is longer than conventional belt clips. With an I block, the bolt is transmitted to the fixture and the pipe has a complete rounded cover so that it can hold the pipe tightly for optimum hose protection and 360 degree sealing. There are 2 pre-threaded nut rods to keep the nut from loosening due to internal forces and vibration. Using this venting belt clip is a perfect choice. POWERFUL Compatibility - Made of stainless steel for longer life. It can meet your every need. Muffler belt clips are best when cosmetic appearance is so important today and is used in a wide range of applications. This will include exhaust pipes, mufflers, cat back systems, racing exhausts and display vehicles. Equipped with 2 pack, significantly reducing cost and time. EASY To Install and Remove - Pre-installed hardware makes installation simple and accurate. Includes preformed tape, pre-threaded nut stems, bolts and nuts. There are 2 hex screws on the vent clamp for easy removal and installation. PERFECT Choice - this step clamp is designed for the connection of the exhaust pipe. The belt vent clip can slide and secure the overlapping portion at the joint. These clamps provide a tighter seal by using a reaction block that transfers bolt to the clamping strength as compared to conventional U-clamps and flat belt clamps, ensuring a tight seal. SATISFIED Customer Service -We are responsible sellers, always providing high quality products and best service. If you have any questions, please contact us and we will do our best to help you.

APPLICABLE SIZE 2.25 Exhaust Clamp, Our 2 14 Exhaust Clamp Joins To 2.25 IDInside Pipe,This Exhaust Clamp Designed For The Connection Of The Exhaust Pipe. Easy To Install And Remove,Keep Tight Seal And Prevents Material Deformation,ID Size2.25inch57.15mm3mm, Length Size 2.94inch. RANGE TO USE Exhaust Clamps 2.25 Inch Connect Exhaust System Components Such As Pipes, Mufflers, Catalytic Converters Etc.These High-Torque Exhaust Clamp By Using A Aluminum Alloy I- Block That Ensuring Unique Seal And High Clamp Loads A As Compared To Conventional U-Clamps And Flat Belt Clamp,we can use a socket wrench to fully tighten the exhaust clamp to secure the pipe. Excellent Material 2.25 Inch Exhaust Band Clamp, We Made With Carbon Steel Zinc-Plated M10 Flange Bolts And Nuts And 304 Stainless Steel Band,Can Efford Melting Point Above 2552F,The Aluminum Alloy I-Block Not Only Ensure A Tighter Seal But Also Efford Melting Point Above 1205F, Not Afraid Of High Temperatures,Ensure Safe Use.. EXCELLENT FEATURE 2.25 Inch Muffler Clamp, The Special Block Provides A Full 360Equal Distribution Of Stretching Forces, Prohibiting Pipe Distortion While Completing A Seal Around The Joined Exhaust Components And We Provide Four Different Sizes For Your Choice To Fulfill Your Needs. You Would Better Measure Before Purchase.. PREFECT CUSTOMER SERVICE If You Any Problems ,Pls Take Time To Contact With Us,We Have Strong Custmo Service Team And Can Solve Your Problems At Any Time, We Hope That Our Products Can Make You Satisfied.

HIGH QUALITY ---- Our 5inch exhaust band clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water. Universal fitment.Joins Joins 5 OD Pipe to 5 ID Pipe, made of 304 stainless steel. Besides, we also provide 4 different sizes to fulfill your needs. You would better measure before pruchase. These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight. Easy to installButt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service. NOTE Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service.

Size Our 2.5 exhaust clamp joins 2.5 OD to 2.5 OD pipe Width of strap 3inch76.2mm Torque 63 Nm. Advantage The 2.5 inch exhaust clamp is easy to install and remove without welding. Application The exhaust clamp is a butt joint clamp simply and effectively connects exhaust system components, such as mufflers, pipes, catalytic converters, etc. Material 304 stainless steel band Zinc-plated M10 bolt and nut Steel gasket, Aluminum alloy I-block. Feature Making the force of 360 evenly distributed, the band clamp provides a seal and prevents material deformation.

APPLICATION the inner diameter of malefemale flange is 3 inch fit for 3 OD pipe. Clamp size will be bigger than 3 inch. This assembly makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes, etc.. QUICK RELEASE DESIGN this design of this 3 inch v band clamp is ideal for applications that require frequent removal. It can be connected and disconnected faster while providing a leak-free seal with even pressure at the flange.. GREAT VALUE this package includes 2 clamp flange assembles. The price of each assembly is much lower than the market price. Save your money. HIGH QUALITY this assembly is made of 304 stainless steel for long durability and reliability, corrosion resistance, and high temperature resistance.. WARRANTY one-year warranty. We provide free service of replacement or refund, you can buy it with confidence. If you have any questions about our product, please contact us through email at any time..

SIZE1.5'' inside diameter, fits for 1.5'' OD pipe, 1 Piece of 100 Brand New U-Bolt MufflerExhaust Clamp.. MATERIAL made of High Quality Stainless Steel polish stainless surface, light weight, heat-resisting, anti-corrosion and durable.. FUNCTION Compress a flex pipe, reattach a dieselgas exhaust tip, or even use on a fence gate Superior seal and high clamp loads prevent exhuast gas and noise from leaking tight but no damaging distortion to Pipe ends or Flex Hose.. INSTALLATION No Welding Design makes fast, easy and accurate installation Removable and Reusable.. SERVICE 90 Days Warranty and 30 days free replacement or returnrefund service.If you have any product questions, please contact us. Thanks..

Material Made of EPDM rubber. Wear-Resistant and High-Temperature Resistant.Anti-aging, not easy to damage. Respond to different climate environments and continue to use.. Function The high-density rubber muffler hanger effectively reduces the sound produced by the shaking and collision of the exhaust pipe. Keep the chassis quiet and stable when your car is driving special sections of the road.. Dimensions 4PCS Set of Exhaust Hanger. Length 2.89in, Width 1.86in, Height 0.83in, Hole Diameter 0.47in.. Universal Rubber Exhaust Hangers fits almost all vehicles such as cars, SUVs, CRVs, Luxuriou, Subaru, trucks and vans, Jeeps, etc.please check the size of the your application before purchasing.. Service We want your 100 satisfaction by providing high-quality products with premium materials and unique designs. We are standing by to assist you with any issues..

Pay Attention Please measure the pipe's outer diameter before purchase. Our exhaust clamp joins 2.563.5mm - 0.2mm OD pipe, width of strap 1.2 inches31 mm. The thickness of the strap is approximately 0.717.78mm. Engineered 304 Stainless Steel Our exhaust pipe clamp crafted from durable 304 stainless steel with a zinc-plated M10 bolt, this material offers strong corrosion resistance and maintains integrity under high heat and harsh road conditions for long-term performance. High-Strength 360-Degree Seal Equipped with an aluminum alloy I-block and Grade 10.9 bolt that evenly distributes over one ton of clamping force around the pipe, creating a leak-proof seal without crushing or distorting pipe ends. No-Weld Quick InstallationThe automotive replacement exhaust clamps has Pre-attached hardware and a straightforward design allow for tool-friendly installation or removal. The setup requires no welding, making repairs and maintenance simpler and faster for various exhaust components.. Dependable Connection Support We provide clear assistance for product fitment or performance questions. If a size issue or defect arises, contact us directly for prompt help in resolving your concern.

Pay Attention Please measure the pipe's outer and Inner diameter before purchase. Our exhaust clamp joins 2.5In63.5mm - 0.2mm OD pipe to 2.5 ID pipe, width of strap3 inches76 mm. The thickness of the strap is approximately 0.25.08mm. Durable 304 Stainless Steel The exhaust pipe clamp is constructed from high-grade 304 stainless steel with a zinc-plated bolt for maximum corrosion resistance. This material offers reliable performance under extreme heat and harsh conditions, protecting your exhaust system with long-lasting strength. Advanced Leak-Proof Seal Our exhaust coupler I-block design creates 360-degree force distribution for a complete, rounded seal. This technology provides superior containment compared to standard U-clamps, preventing exhaust leaks and maintaining system integrity. Quick-Install Design The muffler clamps, Pre-threaded hardware and a no-weld design allow for straightforward installation and removal. The dual-bolt system resists loosening from vibration, enabling a secure connection that simplifies maintenance and service. Universal Exhaust Application The exhaust band clamp is Ideal for connecting pipes, mufflers, elbows, and catalytic converters. Suitable for automotive, performance, and industrial systems, this clamp offers a versatile solution for both repair projects and custom exhaust assemblies.

FIT SIZE 2.5 Exhaust Clamp, Our 2.5 inch ID Exhaust Clamp Fit for 2.5 OD to 2.5 OD Exhaust Pipe, Muffler Pipe, Muffler Inlets, Outlets, Elbow Joints and Pipe.. QUALITY MATERIAL Exhaust Clamps 2.5 Inch, Made From Durable And Robust 304 Stainless Steel Material Will Not Never Rusts And Corrodes For Long Service Life.. WIDE APPLICATION Tirol 2.5 Inch Exhaust Clamp Provide Superior 360 Degree Clamping And Sealing On Exhaust System Components, Such As Pipes, Mufflers, Catalytic Converters, Etc.. EASY TO MOUNT 2 12 Exhaust Clamp, No Welding Design, Epre-Attached Hardware For Fast and Accurate Installation, Or Remove. TIROL Exhaust Band Clamps Are A Simple And Effective Ways Clamping and Sealing Muffler Inlets, Outlets, Elbow Joints And Pipe..

Size Fit for EVIL ENERGY 3.0 inch Flange. Not including flanges. Advantage V band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange. Material Stainless steel clamp. chromium-molybdenum steel T bolt. Long durability and reliability, corrosion resistance, and high temperature resistance. T-bolt Thread size M81.25 Lenght 2.63inch. Application Compatible for exhaust system, turbocharger, downpipe, muffler etc.

Product Size- 1.25 wide clamps fits mufflers with 1.75 I.D. inlets. Package Included- One Pair 1.75 Stainless Steel muffler exhaust clamps. FITMENT- 1.75 Inch Exhaust Clamp for Harley Davidson Street glide, Electra glide, Ultra glide, Road king Touring Models. Crafted from 304 Stainless Steel, This 1.75 exhaust clamp delivers superior durability, Corrosion resistance, and rust protection. Easy to remove and install, The exhaust band clamp chose the design of flexible bolt and nut structure, Can easily disassemble and install them.

Package Includes One Piece 1.5 Heavy Duty U-bolt Clampsfits OD 1.5 inch exhaust pipe. The 4 inch exhaust clamp is made of T201 stainless steel. With its heavy duty and saddle design, it's very durable and sturdy.. The SS 1-12 inch heavy duty muffer clamp with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high quality and craftmanship of the heavy duty clamp can resist corrosion and out of shape during use.. Unlike other u bolt clamps is made from mild steel with zinc plated, the clamps from Emotor Industries are 100 made from stainless steel, which made the u clamp more durable and long time service for you..

Material Our u-bolt clamp is made of high quality stainless steel, polished stainless steel surface, light weight, heat and corrosion resistant, durable. Size 2.5 inside diameter u-bolt exhaust clamp, fits for 2.5 Outer Diameter OD Pipe. Stainless Clamp The stainless steel heavy duty u-bolt clamp is consisted of u-bolt, saddle flange and two nuts. Easy to Use U-bolt muffler exhaust clamps with No welding design are easy and fast to install. Removable and Reusable. Package Include 2 Pieces heavy duty u-bolt exhaust saddle style clamp.

Rugged Double-Layer Design Constructed with a dual-layer 304 stainless steel band for enhanced strength and durability. This reinforced structure significantly reduces the risk of exhaust leaks and provides reliable performance in demanding automotive environments. Precision 2.5-Inch Butt-Joint Fit Engineered specifically to connect two 2.5-inch outer diameter pipes end-to-end. With a wide 3.5-inch88mm strap, it offers a secure and complete connection for exhaust systems requiring a precise butt-joint solution. Uniform 360-Degree Clamping Features an aluminum I-block that distributes force evenly around the entire pipe circumference. This design prevents pipe distortion while creating a tight, leak-resistant seal under high pressure and vibration. Straightforward Bolt-On Installation Designed for simple installation with a bolt-and-nut system, eliminating the need for welding. The hardware is included for a direct setup, allowing for adjustments or future removal with basic tools. Reliable Automotive Solution Ideal for connecting catalytic converters, exhaust manifolds, flex pipes, and mufflers. This clamp provides a solid, long-term connection for repair and assembly projects across various vehicle exhaust systems.

Durable Material made of high quality 304 stainless steel, rust-proof, water-proof, corrosion-resistant, strong, durable and long lasting use.. Powerful function Adopts an open inner and outer ring structure and fastened with bolts. Smooth surface, torsion-resistant and pressure-resistant, tightly locked and large adjustment range. Provides an excellent seal with a variety of hose materials, effectively solves the problem of liquid and gas leakage of the hose.. Easy to use Just loosen or tighten the screw of hose clips by a screwdriver to adjust the size, attach hoses to the fitting tightly. Can be applied to secure hoses, pipe, cable, tube, automotive, industrial, boat, etc.. Package includes 4 Pieces 4 hose clamps, fits hoses from 3.5 diameter up to 4.. 100 Satisfaction guarantee and reliable customer service within a 24 hour time support..

Size This narrow band clamp joins a 3-inch OD-ID slip-fit pipe. The width of the strap is 1.22 inches 31 mm.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Feature The band clamp distributes force evenly at 360, providing a secure seal. The torque is 63 Nm.. Advantage The clamp features a no-welding design, making it easy to install or remove. It is recommended to apply exhaust sealant on the pipes before installation.. Application The narrow band clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, catalytic converters and more..

Swivel Rotating Design for Flexible Positioning Adjustable brackets rotate to align with muffler or exhaust pipe angles and simplify installation on curved or offset systems. Galvanized Steel with Vibration Dampening Zinc-coated mild steel resists corrosion while integrated rubber straps reduce cabin noise from road vibrations. Universal Fit for Most Exhaust Systems Compatible with 2-3.5 diameter pipes 24x3.2x2.8cm 9.45x1.26x1.1 inches and ideal for replacing worn OEM hangers. Bolt-On or Weld Installation Options Pre-drilled holes allow direct chassis mounting or welding with open-end design compatible with standard clamps. Heavy-Duty Kit with 2 Reinforced Hangers Each hanger supports up to 50 lbs to prevent muffler sagging or pipe contact with the ground.

High QualityThis Butt Joint Band Clamp is made of 304 stainless steel for long durability and reliability, zinc-plated M10 flange bolt and nut, steel gasket, and aluminum alloy I-block.. FunctionThe exhaust clamp can be applied for a connection to exhaust pipes, mufflers, catalytic converter connections, and etc. It can hold the pipe tightly without loosening. Unique seal and high clamp loads are provided, without distorting your exhaust components, allowing the flexibility to disassemble for service.. SizeJoins 4 OD pipe to 4 OD pipe, width of strap 3inch 76.2mm. Package includes 1 PCS Exhaust Clamp.. ApplicationSeal exhaust clamp is the muffler repair part, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold, Exhaust Resonator, Exhaust Flex Pipe, and Exhaust Muffler Repair Projects.. Easy to InstallYou just need to tighten or lose the bolts to do connection or releasing. No other welding is needed. The clamps have been tested for strength and are reusable without damaging the pipes.. Service100 satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

FUNCTION The high-density rubber exhaust hanger will solve terrible rattling on your vehicles exhaust system, effectively reduces the sound produced by the shaking and collision of the exhaust pipe, secures your muffler perfectly. The muffler hanger helps fix the exhaust pipe position to reduce vibration and noise, preventing the exhaust pipe from scraping along the ground, keeps the chassis quiet and stable when your car is driving on special sections of the road. The 4-hole exhaust hanger helps you to better alignlevel the exhaust tips. And get these if your exhaust is too close to the bumper. Our exhaust muffler extension Ensures everything is tight and secure for another 100k miles.. UNIVERSAL The multiple holes allow exhaust adjustment and facilitate easy height adjustment for different vehicles. Length 4.4in, Width 1.8in, Height 0.9in, Hole Diameter 0.47in. Rubber Exhaust Hangers fit almost all vehicles such as cars, SUVs, CRVs, trucks and vans, etc. Please check the size of your application before purchasing.. MATERIAL Made of EPDM rubber. Tight and durable, heavy duty. Temperature Range -40F to 248F. Our exhaust hanger is built to endure the diverse temperature range experienced, including both hot summers and cold winters. Exhaust System Hanger Insulator is specifically engineered to be temperature-resistant, guaranteeing long-lasting durability and optimal performance throughout the year.. INSTALLATION The muffler hanger is easy to install. Put the drops of oilsoapWD40 on the post to get the old one off and new one on.. SERVICE We want your 100 satisfaction by providing high-quality and reliable products. If you have any questions, please feel free to contact us via Amazon. Rest easy knowing weve got your back through it all..

Practical 3-Pack Bundle This value bundle includes 3 pieces of 2-12 inch 65mm heavy-duty U-bolt exhaust clamps, perfect for most standard repair jobs on a single vehicle or for mechanics to use on multiple projects. Durable Corrosion-Resistant Forged from high-quality galvanized carbon steel, this clamp is built to withstand high temperatures and resist corrosion, providing a secure, long-term solution for your exhaust system needs. Accurate 2.5-Inch OD Fit Designed with a 2-12 inch 65mm inner diameter, this clamp is the perfect match for pipes with a 2.5-inch outer diameter. Always confirm your pipe's OD before purchasing to ensure a snug and secure fit. Reinforced Saddle Flange Design The saddle flange is reinforced for extra strength, distributing pressure evenly and creating a 360-degree seal that prevents leaks and withstands vibration from diesel or gas engines. Professional-Grade Solution A trusted choice for professional diesel and gas exhaust repairs, reattaching exhaust tips, and sealing pipe joints. Essential for garages, fleet maintenance, and serious car enthusiasts.

Quality Construction Built with premium-grade steel, AFEISOL exhaust U clamps provide exceptional durability, galvanizing the surface makes it rust-resistant, corrosion-resistant and withstand extreme heat and harsh environments, provide reliable performance for automotive repairs and custom exhaust projects. Universal Fit for Muffler Exhaust Systems These muffler exhaust clamps are designed for sealing muffler inlets and outlets, elbow joints, piping, and maintaining exhaust systems. Prevents leakage of exhaust gases and noise. And the pipe ends must not be damaged or deformed. Saddle-Style Design for Leak-Free Sealing The reinforced saddle shape ensures even pressure distribution, preventing exhaust leaks while maintaining a tight grip with the U-Bolt Clamp mechanism. Easy Installation Adjustable Tension These exhaust pipe clamps allow quick adjustments and hassle-free installation using standard tools Spot welded trusses on the saddle prevent the clamp post from opening or losing contact when tightened Removable and reusable, very user friendly. Package Includes 2 Pack universal muffler tip exhaust hook U-Bolt mild steel clips fits for OD 2-14 exhaust pipe, which consisting of U-bolt, saddle flange and nut with nut washer.

Fits 3 OD Exhaust Pipes The exhaust clamp securely connects two exhaust pipesone with a 3-inch outer diameter and one with a slightly smaller sizeensuring a tight seal for muffler inlets and outlets, elbows, and coupling pipes.. Durable 304 Stainless Steel Construction Made from premium 304 stainless steel, this U clamp has a passivated surface, making it resistant to heat, corrosion, and wear for long-term performance in harsh environments.. Reinforced and Secure Connection Evil Energy's U-bolt clamp has a thickened slot, which is much stronger and less prone to deformation, while the high-strength stainless steel nuts with anti-slip teeth ensure a tight, vibration-resistant hold and prevent the nuts from loosening.. Easy Installation, No Welding Our U muffler clamp features precision-machined threaded rods for fast and secure installation, and it is fully detachable and reusable for convenient maintenance or adjustments.. Complete Installation Kit Included Comes with 2 x heavy-duty U-bolts for 3-inch OD exhaust pipes, 2 x saddles, 4 x 38-inch nuts, and 1 x wrench, ready for quick and effortless installation..

Specification- ELSHINE 1.5 inch exhaust clamp Joins 1.5 inch OD Pipe to 1.5 inch ID Pipe. Please measure your pipe OD and ID to select appropriate clamps. Package 2pcs. Material stainless steel.. Seal and safe connection- Lap joint exhaust clamp is a simple and time-effective way to connect heavy-duty exhaust system components such as pipes, muffler tip and catalytic converters.. Long-lasting material- Its durable, waterproof and anti-corrosion.. Easy installation- No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done. It is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry.. Worry-free Purchase- Elshine offers lifetime warranty for every product you purchase. If you encounter any problems, or need any replacement parts, please feel free to contact us, our support team is 247 available. If you want to return, we will provide prepaid return labels. Your satisfaction is what we pursue..

Premium 304 Stainless Steel Exhaust ClampsOur 2.5 inch exhaust clamp is made of high-grade 304 stainless steel, the muffler band clamps offer exceptional corrosion resistance, rust prevention and superior durability, ensuring long-lasting durability and reliability even in harsh environments and extreme temperatures.With its outstanding durability, the muffler clamp provides long-lasting reliability for vehicle's exhaust system, effectively reducing maintenance costs and replacement frequency.. Superior Sealing Performance Sealing is where this clamp truly excels. The innovative I-shaped aluminum alloy block evenly distributes clamping force, creating a 360 secure, leak-proof connection. Unlike traditional clamps, its full clamping area design seals the entire connection without distorting pipes or tubing. With two pre-threaded nut rods, it remains firmly in place,unaffected by internal forces or vibrations.It's the ultimate choice for reliable, efficient exhaust system connections.. Easy to InstallWith user-friendly design, joint band clamps can be quickly installed using standard tools. Before starting to tighten, partially screw the two bolts into the gasket and gradually alternate tightening between the two bolts to ensure even pressure distribution, prevent deformation, and ensure a leak free seal between the pipe clamp and the pipe wall. Its modular structure allows for easy disassembly during maintenance or system upgrades without damaging the connected pipes.. Wide ApplicationOur lap joint exhaust band clamp 2.5 inch is a simple and effective method for connecting exhaust system components, suitable for connecting mufflers, catalytic converters, exhaust pipes, cat back systems, racing exhausts, display vehicles and turbo downpipes, making it a must-have for maintenance, upgrades, and customization. In the fields of automotive modification, industrial exhaust systems, and marine engines, joint exhaust pipe muffler clamp plays a crucial role.. Package Included2pcs exhaust clamps 2.5 inch, including 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, and aluminum alloy I-block. 2 12 lap joint exhaust clamp joins 2.5 OD pipe to 2.5 ID pipe. Our exhaust pipe repair clamp combines excellent quality and precision engineering to ensure precise dimensions and robust lap joints, providing a secure and leak-free seal that can withstand the test of time. Please measure the pipe outer and inner diameters before purchase..

Versatile CompatibilityThis U-bolt clamp features a 3-inch inner diameter, designed to fit 3-inch outer diameter pipes, these U-bolt exhaust clamps are ideal for a wide range of applications, including muffler inlets and outlets, elbow joints, and exhaust system repairs. They effectively prevent leaks of exhaust gas and noise, ensuring optimal performance.. Durable Construction Made from high-quality materials such as reinforced mild steel or stainless steel, these clamps are corrosion-resistant and built for long-lasting durability. The galvanized or zinc-plated surface adds an extra layer of protection, making them suitable for harsh environmental conditions.. User-Friendly Installation Featuring a no-welding design, these exhaust clamps are designed for quick and straightforward installation. The saddle-style U-bolt construction enables easy adjustments, and they can be removed and reused without damaging the pipe.. Secure and Reliable Sealing These clamps provide excellent sealing capabilities, maintaining high clamping loads to prevent exhaust gases and noise from leaking. They are perfect for reconnecting diesel and gas exhaust systems, ensuring a tight fit without compromising the integrity of the pipe.. Included Components Each package includes 2 pieces of heavy-duty U-bolt clamps, complete with necessary nuts for installation. Please verify your pipe size before purchasing to ensure compatibility. For any inquiries regarding the product, feel free to reach out for assistance..

COMPATIBILITY Fits 2005-2005 Chrysler 300 2006-2006 Chrysler 300 2007-2007 Chrysler 300 2008-2008 Chrysler 300 2009-2009 Chrysler 300 2010-2010 Chrysler 300 2008-2008 Dodge Challenger 2009-2009 Dodge Challenger 2010-2010 Dodge Challenger 2006-2. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. SUPERIOR SEAL -- Provides superior 360 clamping and sealing on muffler inlets, outlets, elbow joints and pipe. AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for your vehicle repair needs. PREMIUM MATERIALS--Made from a variety of materials including low-carbon steel or stainless steel for durability and long life. BETTER TOGETHER -- Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade.

Size This lap joint clamp joins a 2.5 OD pipe to a 2.5 ID pipe. The width of the strap is 2.94 inches 74.82 mm. Please accurately measure the outer diameter of the pipe before placing an order.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Advantage The clamp features a no-welding design, making it easy to install or remove.. Feature The band clamp distributes force evenly at 360, providing a secure seal and preventing material deformation. The recommended torque is 63 Nm.. Application The lap joint clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, and catalytic converters, and more..

Size ID 4 inch clamp, joins 4 OD-ID slip fit pipe. Width of strap 1.22 inch 31mm. Thickness of strap aprox 1.89mm.. Material Premium T-304 stainless steel band to ensure durability corrosion resistance, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.. Easy to Install No welding design, pre-attached hardware for fast and accurate installation, or remove.. Application An effective way to connect most exhaust system components, aslo can be used for muffler repair or catalytic converters.. No Damage to Pipe Unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal..

Size This lap joint clamp joins a 5.0 OD pipe to a 5.0 ID pipe. The width of the strap is 2.94 inches 74.82 mm. Please accurately measure the outer diameter of the pipe before placing an order.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Advantage The clamp features a no-welding design, making it easy to install or remove.. Feature The band clamp distributes force evenly at 360, providing a secure seal and preventing material deformation. The recommended torque is 63 Nm.. Application The lap joint clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, and catalytic converters, and more..

Strength 198 Lbs. Temperature -170 To 1000, High-temperature Applications Such As Cv Boot Clamps, Tie Rod Boot Clamps, And Heat Wrap For Exhaust Pipes. Uv Resistant For Outdoor Pvc Pipes And Metal Pipes, Pipe Straps.. Hardware. providing The Best Solution For Your Long-term Work Of Fixing Objects Like Machinery, Vehicles, Gardens, Farms, Cables, Pipes, Roofs, Basements, Electric Fence Kit, Fence T Post Clips, And Barb Wire Fencing, Aluminum Fence Panels.. Industrial Supplies Stronger Than Galvanized and PlasticPVC, Trusted, And Used By Ships, Mines, Electric Power, And Oil Companies Globally. Accessories For Steel Mesh, Fence Gates, Barbed Wire Fencing, Chain-link Fence Privacy, And Chicken Wire Rolls.. Get Repair Fast With These Simple-to-use Products. No Special Tools Required. Only Need A Set Of Needle Nose Plier To Tighten And A Diagonal Plier Or Tin Snips To Cut The Zip Tie. Also Suitable For T Post Clips, Electric Fence Gate, Fence Privacy Screen, Barbed Wire, Plant Cover, Slats, Metal Fence Panels, Wire Fence Rolls, And More.. RISK FREE GUARANTEEDYoull be pleasantly surprised at the quality, durability, longevity and performance or we will refund your money no questions asked. So why not give it a try.

Product Size Joins 2.5 OD pipe to 2.5 ID pipe, width of strap 2.93 inches 74.5 mm. The thickness of strap is approximately 0.240.6mm. Warm tips Before purchasing our clamp, please carefully check and measure the OD and ID of your pipe. Our lap joint clamp is suitable for pipe walls with a thickness of 0.06-0.0711.5-1.8 mm.. Installation Guidelines 2 sets of exhuast clamps are in the one box. Partially thread both bolts into the gasket before initiating tightening. Gradually alternate tightening between the two bolts to ensure uniform pressure distridution. This prevents band distortion and guarantees a leak-free seal between the clamp and pipe wall.Simply wrap an aluminium foil around the connection before installation is the best.. Premium 304 Stainless Steel Construction Crafted with high-grade 304 stainless steel, these muffler clamps delivers superior durability, corrosion resistance, and rust protection. Its cold-rolled design and chromium oxide layer ensure reliable performance in harsh conditions, offering long-lasting strength and stability even under extreme temperatures.. 360 Superior Sealing Features an I-shaped aluminum alloy block that evenly distributes clamping force for a secure, leak-proof connection. Its precision-engineered design ensures tight pipe grip and optimal sealing performance, even under high-pressure conditions.. Versatile Repair Solution Designed for durable, leak-free repairs on pipes, mufflers, catalytic converters, and more. Ideal for automotive, industrial, and household applications, these clamps provide a quick, secure, and long-lasting fix for damaged or loose components..

STRONG STRUCTURE Made from zinc-plated carbon steel for heat and rust resistance in exhaust applications. 4 Pack. FITS 2.5 OD PIPE Correct size for pipes with 2.5 inch outer diameter, not for expanded or slip-fit ends.. EASY INSTALLATION Simple U-bolt style design requires no welding and can be removed or reused.. SECURE CONNECTION Provides firm compression and minimizes leakage in muffler or pipe joints.. MULTI USE Suitable for automotive exhausts, tailpipe joints, and metal pipe assembly projects..

Durability Made of carbon steel, galvanized surface, heat resistant, corrosion resistant.. Size 2-14 in. ID, fits 2-14 in. OD pipe.. Easy to install Weld-free design makes installation quick, easy and accurate, removable and reusable.. Function Compression hose, reconnects diesel gas exhaust, even on fence gates excellent sealing and high clamping loads prevent exhaust gas and noise leakage.. Package Includes 2 Pack universal muffler tip exhaust hook U-Bolt mild steel clips..

Durability Made of carbon steel, galvanized surface, heat resistant, corrosion resistant. Size 2-12 in. ID, fits 2-12 in. OD pipe. Easy to install Weld-free design makes installation quick, easy and accurate, removable and reusable. Function Compression hose, reconnects diesel gas exhaust, even on fence gates excellent sealing and high clamping loads prevent exhaust gas and noise leakage tube ends or Flex hoses are tight but do not cause damaging deformation. Package Includes 2 Pack universal muffler tip exhaust hook U-Bolt mild steel clips.

COMPATIBILITY Universal fit, check product dimensions. GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. CONNECTS EXHAUST PARTS -- Provides secure connection for the muffler shield. AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for your vehicle repair needs. COMPLETE SOLUTION -- Kit includes two clamps. PREMIUM MATERIALS--Made from robust material for durability and long life. BETTER TOGETHER -- Use Walker accessories when installing Walker heavy duty muffler and pipe shield for a complete exhaust system upgrade.

Joins 3.0 inch OD pipe to 3.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque 63 Nm.. Connection Type ID-OD slip fit connection with either straight or Z compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely.. Distributes the clamping force evenly over the entire 360 to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable.. Easy to handle and disassemble. Suggestion Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal.. EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

2 Exhaust Clamps get 2 durable 2.5 exhaust clamps in one package, no need to buy extras for replacements. Quality Galvanized Iron Material thicker more rust-resistant than standard clamps, with heat-resistant silver coating. Perfect 2.5 Od Fit specifically sized for 2.5-inch outer diameter pipes, ensuring leak-free sealing. No-Weld InstallationHeavy-duty U-bolt and saddle flange design installs in minute,no welding required just tighten the 38 nuts Creates a tight seal to prevent exhaust leaks and noise.. Beyond Exhaust Use also works for compressing hoses, Securing fence gates, Fixing gas exhaust tips.

SPECIFICATIONS Inner Diameter 2.5 inch Strap Width 1.22 inch 31mm Strap Thickness 1.8mmFits 2.5-inch OD straight pipe Not compatible with flaredexpanded pipes. PREMIUM MATERIAL Narrow Band Muffler Clamps are mainly made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. WIDE APPLICATIONS This Narrow Band Muffler Clamp is engineered for a wide range of applications, providing a secure seal on exhaust pipes, mufflers, catalytic converters, and other critical components.. EASY NO-WELD INSTALLATION This exhaust clamp features a smooth surface design for quick and hassle-free setup. For an optimal seal, we recommend applying a specialized exhaust sealant to the pipe interface before installation.. WHAT YOU GET This package include 2pcs Narrow Band Muffler Clamps..

PREMIUM MATERIAL Exhaust Clamps are mainly made of high-quality 304 stainless steel, which is rust-proof, corrosion-resistant and waterproof.. SPECIAL DESIGN Exhaust Clamp uses the 360-degree winding design, which can provide uniform force to the joints and prevent the deformation of the pipe connection.. SPECIFICATIONS ID 2 inch51mm Thickness0.5mm Width of strap75mm.Fits 2inch OD straight pipe Not compatible with flaredexpanded pipes. WIDE APPLICATION The exhaust clamp can be used in many scenarios, such as exhaust pipes, mufflers, catalytic converters etc.. MULTIPLE CHOICES We have a wide range of Exhaust Clamps in different sizes to choose from2.5 3..

Size This lap joint clamp joins 3.0 OD pipe to 3.0 OD pipe. The width of the strap is 3 inches 76.7 mm.. Application The lap joint clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, catalytic converters, and more.. Advantage The clamp features a no-welding design, making it easy to install or remove.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Feature The band clamp distributes force evenly at 360, providing a secure seal and preventing material deformation. The torque is 63 Nm..

Durable Made of high quality carbon steel, galvanized surface, heat resistant, corrosion resistant.. Size 3 inch ID, fits 3 inch OD pipe, 2 piece universal muffler tip exhaust hook U-Bolt mild steel clips.. Easy to install Weld-free design makes installation quick, easy and accurate, removable and reusable.. Function Compression hose, reconnects diesel gas exhaust, even on fence gates excellent sealing and high clamping loads prevent exhaust gas and noise leakage tube ends or Flex hoses are tight but do not cause damaging deformation..

Function This exhaust clamp is designed to connect 2.5 outer diameter pipes with inner diameter pipes, effectively reducing noise and exhaust leaks without flattening the pipes, thereby creating a sturdy and maintainable connection.. High Quality This exhaust clamp is made from high-quality metal materials that are resistant to rust and deformation. High-hardness bolts provide excellent clamping and sealing capabilities, capable of withstanding significant clamping forces.. Easy Installation This exhaust clamp requires no specialized tools for setup. Simply position it over the pipe joint, tighten the bolts to the recommended torque, and it is ready for use.. Design This exhaust clamp features a 360-degree full clamping area design with uniformly distributed tensile force, effectively preventing pipe deformation and ensuring no damage to the pipe ends.. Package You will get 1 x exhaust clamp, size 2.5 , which enhances the stability of the exhaust system during vehicle operation. The lap joint exhaust clamp is widely used in the exhaust systems of automobiles, commercial vehicles, and off-highway industries..

Fit Pipe OD 25mm 0.98 Total Height 55mm 2.17 Thread Size M8 x 26mm M8 x 1.02DL Rod Diameter 7mm 0.28 Saddle Size 55 x 15mm 2.17 x 0.59LW Package Content 2pcs x U-bolt Exhaust Saddle Style Clamps. Material U-shaped bolt clamps are made of carbon steel with a zinc-plated coating that enhances their corrosion and heat resistance.. Design The saddle type u-bolt clamps consist of a U-bolt, saddle flange and two nuts, U-shaped design ensures that the clamp can withstand the pressure and heat generated by the exhaust system, is easy to install, and is removable.. Easy to use To use this muffler U-bolt clamp, simply place the U-bolt portion on the exhaust Pipe and fasten the saddle and nut. The U-bolt clamp firmly holds the muffler in place to prevent unnecessary movement or vibration.. Application Used to seal muffler inletoutlet, elbow joint, Pipe, and maintenance exhaust system. Helps reduce noise and vibration without damaging tube ends..

Inlet 4 inner diameter - Outlet 4 inner diameter - Overall Length 30 - Body length 24 - Body type 7 round. Straight Through Design can increase the space in the middle of the pipe and allows a higher flow possible. With 4 layers of material and CRF Continuous Roving Fiberglass technology, Floshine resonator brings a low and deep tone.. Polished stainless steel and high quality material make it have the characteristics of high temperature resistance,Factory-style Welded structure provide stability and longer service life.. Our universal muffler exhaust is fit on most vehicles. Please measure the exhaust pipe size and space before purchase to ensure smooth.. Welding or exhaust clamps is required. Professional installation is recommended..

COMPATIBILITY Fits 2011-2011 Ram 1500 2012-2012 Ram 1500 2013-2013 Ram 1500 2014-2014 Ram 1500 2015-2015 Ram 1500 2016-2016 Ram 1500 2017-2017 Ram 1500 2018-2018 Ram 1500 2009-2009 Dodge Ram 1500 2010-2010 Dodge Ram 1500 2011-2011 Dodge Durang. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. SUPERIOR SEAL -- Provides superior 360 clamping and sealing on muffler inlets, outlets, elbow joints and pipe. AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for your vehicle repair needs. PREMIUM MATERIALS--Made from a variety of materials including low-carbon steel or stainless steel for durability and long life. BETTER TOGETHER -- Use Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade.

SizeInner diameter 4 inches. Not suitable for exhaust pipes larger than 4 inches.. Excellent Unique MaterialThis Product is Made of Stainless Steel It is Not Only Lightweight But Also Has The Function of Waterproof and Rustproof Long Life Can Be Used for a Long Time. Cool Color MatchingThis Product Uses Black and Silver Two-Color Construction, Which Perfectly Integrates The Passion of Speed and Color, Making Your Car More Unique. Lightweight and Easy to InstallThe Product Weighs only 100g and The Semi-Circular Design Makes It Easier to Install The Exhaust Pipe We Donate Professional Screws to Make It More Convenient for You During The Installation Process. excellent functionThis Bracket is Mainly Used to Muffle The Exhaust Pipe of Your Car Effectively Reducing Unnecessary Noise and Making Your Riding More Comfortable.

Universal Exhaust System Compatibility This exhaust band clamp serves as a versatile solution for connecting heavy-duty exhaust components, including catalytic converters, exhaust nozzles, manifolds, resonators, flexible pipes, and mufflers. Ideal for repair or upgrade projects, it seamlessly integrates with various exhaust systems, eliminating the need for multiple specialized clamps.. 360 Leak-Proof Sealing Design The exhaust clamp is engineered with a mild steel semicircular gasket and an I-shaped block, this stainless steel muffler seal ensures uniform 360 clamping force distribution. It tightly secures pipes to prevent leaks, control material deformation, and maintain optimal exhaust flowcritical for performance and emission compliance.. Tool-Free Reusable Installation Featuring a flexible bolt-and-nut structure, this adjustable exhaust clamp allows easy removal and reinstallation without damaging pipes. No professional tools required simply tighten the bolts to achieve a secure fit. Its reusable design makes it perfect for temporary fixes or permanent installations.. Enhanced Seal Tip For superior sealingespecially on slightly out-of-round pipeswe recommend wrapping the clamping surface with multiple layers of aluminum tape. This pro tip fills micro-gaps, further preventing leaks and ensuring a professional-grade seal that withstands extreme temperatures and vibrations.. Wide Application This product is not vehicle-specific and works with a wide range of applications. Please review the product specifications and confirm compatibility before placing your order. No instructions are includedprofessional installation is highly recommended for optimal use. We stand behind our product quality..

Helps provide a tight seal for your vehicle's exhaust connections. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment OE. GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors. GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle. GM regularly updates production and service part designs to integrate new materials and technologies.

Joins 2.5 OD pipe to 2.5 OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.. Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.. The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes.. EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

Perfect FitDesigned for a precise slip-fit connection, this 2.0 inch exhaust clamp Fit for 2 OD to 2 ID Exhaust Pipe, Muffler Pipe, Muffler Inlets, Outlets, Elbow Joints and Pipe.. High Quality MaterialConstructed from heavy-duty 304 stainless steel, this durable pipe clamp resists rust, corrosion, and high heat for a long-lasting repair on your muffler exhaust system.. Easy InstallationFeatures pre-attached hardware for a tool-friendly, no-weld design. Install or remove this exhaust clamp quickly and accurately without specialized skills.. Superior 360-Degree Seal with High Clamping ForceUtilizing technology compatible with premium brands, this narrow band muffler clamp delivers a full 360-degree seal to prevent leaks without crushing pipes.. Value 2-Pack for Reliable RepairsGet 2 professional-grade c clamps in one pack. For the best seal, apply exhaust sealant before installation. A cost-effective solution for exhaust and catalytic converter connections..

Package Includes One Piece 3 Heavy Duty U-bolt Clamps fits OD 3 inch exhaust pipes, DO NOT fit for ID 3 inch pipesadapters. The SS 3 inch heavy duty muffer clamp with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high quality and craftmanship of the heavy duty clamp can resist corrosion and out of shape during use.. The stainless clamp is consisted of u-bolt, saddle flange and 716 Nuts.The u bolt clamp 3 inch is made of T201 stainless steel. With its heavy duty and saddle design, it's very durable and sturdy.. Please check the detail infomation as belows. We value your shopping experience and strive to offer high quality product with sincere service. If you have any questions, please contact us..

Size 2 inch butt joint exhaust clamp,Joins 2 OD pipe to 2 OD pipe. Material Premium T304 stainless steel band,zinc-plated carbon steel M10 boltDouble stack self-locking lock washers and nut, carbon steel gasket, aluminum alloy I-block.. Feature No welding design, easy to install or remove. The way it wraps around the exhaust pip ensure there is no leak or twist. Also the exclusive reaction block provides 360equal distribution of stretching forces, prohibiting pipe distortion while completing a seal around the joined exhaust components.. Application The exhaust clamp can be applied for a connection to exhaust pipes, mufflers, Pipes connections. Different clamp has different application and features, find the one that suit your needs most.. Durable and Anti-rust Tested to 100 hours salt spray. Anti-corrosion and long time service..

Size This narrow band clamp joins a 2.5-inch OD-ID slip-fit pipe. The width of the strap is 1.22 inches 31 mm.. Application The narrow band clamp is a simple and effective way to connect exhaust system components such as pipes, mufflers, catalytic converters and more.. Advantage The clamp features a no-welding design, making it easy to install or remove. It is recommended to apply exhaust sealant on the pipes before installation.. Material The clamp is made of a 304 stainless steel band, a zinc-plated M10 bolt and nut, a steel gasket, and an aluminum alloy I-block.. Feature The band clamp distributes force evenly at 360, providing a secure seal. The torque is 63 Nm..

STURDY Our u-clamps are made of metal with excellent workmanship, smooth surface and corrosion resistance. U-bolt saddle design can reliably fix and connect the equipment. FEATURESSaddle Style clamps are designed without welding, flexible, can be quickly disassembled and reused. Muffler Exhaust Clamps have good sealing, which can effectively prevent exhaust gas and noise leakage, and will not cause damage or deformation to the pipe tip. INSTALLATION U Bolt Clamp on Tip Pipes Connection is easy to install, just insert and tighten the nuts at both ends, note that in the process of installation can be back and forth alternately twisted bolts, so as to ensure uniform tightening of the two ends of the force balance. APPLICATIONS Universal muffler tailpipe hook, can be used for sealing muffler inletoutlet, elbow joints, piping, maintenance exhaust systems. SIZE U-clamps is 1.75 ID, suitable for 1-34 inches OD pipe. Please measure the size of your equipment and choose the right U-clamp before placing an order. YOU WILL GET 2 x 1.75 inch U-Bolt Clamps, after receiving the U-clamps, if you need any help during use, we will be happy to assist you.

Package Includes you will receive 4 pieces of 2.5 inch exhaust clamp These clamps provide a practical and efficient way of connecting exhaust pipes, mufflers, and more A good attribute to consider for those in need of a tool that will secure and seal their car components. Proper Dimension these exhaust clamps are approx. 2.5 inches in diameter, 3 inches in width, which can be applied to connect a pipe with an outer diameter of 2.5 to a pipe with an outer diameter of 2.5, the clamps offer good sealing and prevent material deformation. Quality Materials our 2.5 inch exhaust band clamp is made of 304 stainless steel and zinc plating A desirable feature for those seeking clamps that resist corrosion and rust brought about by water interaction. Simple Installation the butt joint band clamp is designed to hold the pipe securely in a 360 degree arc, providing a uniform force without leakages The 2 12 inch exhaust clamp is easy to install, no welding required Just fit them onto your pipe, tighten, and you're good to go It is recommended that put exhaust sealant on the pipes before installation. Wide Range of Application the exhaust clamps are versatile tools for industries and applications, whether you're looking to hold exhaust pipes, mufflers, or other exhaust system components, these clamps deliver enhanced functionality and are practical tools in your toolkit.

Flexibility2.5 Butt joint exhaust clamp,Joins 2.5 OD pipe to 2.5 OD pipe, Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Butt joint clamp 2.5,Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.. 2.5 Inch butt joint exhaust clampButt-joint clamps are a good choice when cosmetic appearance is important. This type of clamp is for connecting two pipes that have the same outside diameter.. Easy To InstallStainless Steel Butt Joint Exhaust Band Clamp-Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint.. Package Includes Exhaust Clamp,Butt Joint Band Clamp Sleeve Coupler Stainless Steel 2.5 Inch,2Pcs.2.5 Inch Butt Joint Exhaust Band Clamp Sleeve Stainless Steel.Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion.. Clamp material Stainless Steel. 2.5 inch 2 12 butt joint exhaust band clamp,Perfect for Catback Exhausts, Mufflers, Downpipes, Headers, Manifolds.The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers.

Industrial-Grade Durability Crafted from premium industrial steel, these clamps are engineered for long-lasting durability and optimal performance, even in demanding environments.. Rust-Proof Protection The black zinc coating serves as a formidable barrier against corrosion and rust, ensuring that these clamps withstand the test of time.. Leak-Proof Assurance Designed for a secure and leak-resistant connection, XIEKRAB U-bolt clamps provide peace of mind for efficient exhaust flow.. Effortless InstallationThanks to their no-welding design and compatibility with a specific inside diameter ID, these clamps are effortless to install and dismantle, enhancing overall efficiency.. Comprehensive Package Each package includes saddle clamps, U-bolts, nuts, and a user-friendly wrench, all thoughtfully packed in a sturdy carton..

Durable Material These exhaust butt clamp made of premium stainless steel for long service life, anti-corrosion, clean and bright apperance. Due to the light and screen difference, the item's color may be slightly different from the pictures.. Suitable Size 2 inch ID 250.8mm, overall length 3.7395mm 2.5 inch ID2.563.5mm,overall length 3.7395mm.2 sizes for your option. Please measure before purchasingand there is a certain error in manual measurement. Application The butt joint exhaust clamp?suitable for exhaust system, muffler and catalytic converters.. Easy to Install Use This type of stainless steel muffler clamp is much easier to separate without distorting your exhaust components,allowing the flexibility to disassemble for service. Superior sealing capability prevent exhaust gas and noise from leaking.. Please Notice The gap between 123-18 inches is normal, this exhaust clamp is adjustable with a large wrench by rotating the screws at both ends to accommodate the inability to truly tight fit. If the gap is too large or any problem, please feel free to contact us, thank you..

Walker offers a variety of clamp styles and sizes for your installation needs. Helps to ensure a leak-free connection. Constructed from durable and robust material for long life. New Walker accessories help to ensure effective exhaust repairs. Walker supplies all of the accessories you need to do the complete exhaust job.

Exhaust-Mate offers a variety of clamp styles and sizes for your installation needs. Helps to ensure a leak-free connection. Constructed from durable and robust material for long life. New Exhaust-Mate accessories help to ensure effective exhaust repairs. Exhaust-Mate supplies all of the accessories you need to do the complete exhaust job.

Heavy duty u-bolt exhaust saddle style clamp. Made from steel with anti-rust coating. Diameter shown is inside diameter ID which fits over the pipe. Includes saddle, u-bolt, two nuts. Multiple uses with numerous sizes to choose from.

Exhaust clamp is used for 2.0 Inch OD to 2.0 OD exhaust pipemufflercatalytic converters connection,ect. Joint your exhaust tubing together quickly without welding.. No welding design makes exhaust clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. Exhaust clamp is removable and reusable.. The reaction block provides a full 360 equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined exhaust components.. ApplicationButt joint Exhaust Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance.. WARRANTY - SPEEDWOW provide 2.0 inch Exhaust Band Clamp with 5-month warranty.Any product problem, please feel free to contact us..

Universal fitment, Joins 2.25 OD Pipe to 2.25 ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly.. The lap joint clamps 2.25 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars.. Conforms to pipe and flex tubing, exhaust pipe connector come with an I block provides a full 360 equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection.. No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done.. SYKRSS value your shopping experience, If you encounter any problems in installing the 2.25 lap joint band clamp, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible..

Walker offers a variety of clamp styles and sizes for your installation needs. Helps to ensure a leak-free connection. Constructed from durable and robust material for long life. New Walker accessories help to ensure effective exhaust repairs. Walker supplies all of the accessories you need to do the complete exhaust job.