Model K-97339-NA mounting block designed for use with Kohler Artifacts T72790-9M, Purist T97328-4, Stillness T97344-4, Margaux T97331-4, Kelston T97332-4, Composed T73087-4 freestanding bath fillers. Note This is a universal replacement kit for the Kohler bathtub filler, both of them are not include screws. Because each faucet base has a different caliber screw. Please check the compatible model number of the bathtub faucet before purchasing. Material K-97339 mounting block Length 4-1116, Height 2-14, 12 Connections. Brass and metal construction for increased reliability and longer service life. Feature Faucets mounting-block installs into the wood or concrete subfloor to firmly anchor the bath filer faucet. Can be installed without required freestanding bath filler. Easy to Install Allows installation close to the wall, just fix the base, connect the hot and cold supplies and install the whole bathtub faucet on the finished floor.

Durable Quality With textured and paintable black surface, these siding mounting block are made of high-quality UV resistant plastic. You may also paint the fixture to finish with your desired colors to match the color with your vinyl siding or just fine left with its natural black color. Compact Size These mounting blocks measure 6.53 inches in width and 10.23 inches length. Perfect solution for 4 inch height of the vinyl siding with double 12 inch width lap siding surface. NoteTo stop water from penetrating the electrical box, you must seal the top of the box except the drainage hole on the bottom. Easy to Install This vinyl siding mounting block is super easy and fast to install on vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2.Remove the knock-out from the electrical box and insert the cable connector into the hole. 3.Put the wire through the cable connector and mount the box up with the included couple srcews. 4.Put the outside light in place on the electrical box. Widely Applicability These siding mounting kits can mount light fixtures on all siding types, including T-111, HardiePlank Lap Siding, and other flat surfaces. It makes adding new lighting to existing siding more easy with the built in electrical box. Package Included 2 pack in black. Includes 2x vinyl siding mounting blocks with built-in electrical box, 2x NM cable connector, 8x screws. Ensure you have enough supplies to complete your projects. NOTE If the size of the mounting block does not match your siding surface, caulk around the top of the mounting block.

Universal CompatibilityOur transducer mounting board designed to fit most transducer models, size of 12 X 3.5 X 34 supports multiple transducers. The transducer mount board is perfect for fish finders, depth sounders, and sonar systems on kayaks, boats or pontoons.. Marine-GradeOur transducer transom mounting plate is made from high-strength, UV-resistant HDPE to withstand saltwater, sun exposure and impacts. The boat transom plate corrosion-proof and outlasts metal mountsno rust or degradation over time. The bright black surface offers both aesthetic appeal and effectively covers up existing holes on boats, also saves your transom from any additional holes in the future.. Easy InstallationThe transducer mounting block for boat equipped with two stainless steel screws, pre-drilled holes and adjustable mounting slots allow for tool-free setup in minutes. Recommend using marine adhesive around the edges for a better seal. Do not over tighten screws when mounting transducers, make sure they don't go through the mounting board.. Optimized PerformanceThe boat transducer board with flat surface ensures proper transducer alignment for accurate depth readings and clear sonar imaging. Reduces turbulence and drag for smoother boat performance.. Versatile LightweightOur boat transducer block with compact design fits tight spaces, while the size of 12 X 3.5 supports multiple sensors. The transducer board is lightweight yet rigidideal for kayak fishing, bass boats, or offshore use..

EFFORTLESS INSTALLATION This low voltage bracket is extremely easy to install, simply cut holes in the wall according to the 4 corner hole markings, then insert the bracket and tighten the two clamping wings to complete the installation. The bracket supports horizontal or vertical mounting, easy to operate, even if you don't have professional knowledge.. FLUSH MOUNTING AND STURDY The bracket integrates seamlessly with your wall for a clean and tidy appearance, thanks to its flush-mount design. It is upgraded with PC material, which is more durable and not easy to deform, ensuring long-lasting use.. WIDE COMPATIBILITY Our mounting screws can be adjusted to fit different wall thicknesses up to 20mm 0.787 inches. In addition, our low voltage ring is also compatible with many different types of standard size panels, providing greater flexibility.. WIDE APPLICATION It is suitable for a variety of scenarios, including home networking, TV backplane wiring, home theater, office, etc. It can not only be used for low-voltage cable such as speaker cables, coaxial cables, HDMI and datacommunication cables installation, but also can be used in combination with a variety of panels, such as HDMI, Ethernet, and brushes. It provides quality solutions under various wiring needs.. PACKAGE CONTENTS Includes 5 low voltage wall brackets and 10 Phillips screws. We provide 24 hours customer service and 18 months warranty..

Fixation and Support This installation block features a robust brass core reinforced with corrosion-resistant metal components, providing a low-key yet solid foundation. It can keep your bath filler faucet firmly anchored without swinging or moving.. Wide Compatibility Compatible with Kohler Artifacts T72790-9M, Purist T97328-4, Stillness T97344-4, Margaux T97331-4, Kelston T97332-4, Composed T73087-4 freestanding bath fillers.. Flexible Installation Options K-97339-NA mounting block can be installed independently without requiring the freestanding bath filler to be pre-assembled, giving you greater flexibility during renovation or construction phases. Its compact design allows placement close to the wall, saving space while maintaining aesthetic appeal.. Provide Precise Installation Positioning There will be preset hole positions on the installation block, ensuring the accurate positioning of cold and hot water pipes and fixing bolts. This facilitates installation and construction, and also ensures that the faucet can be installed perfectly in place, avoiding installation difficulties or leakage risks caused by deviation in hole positions.. Package Included 1plug, 1base, 1guard, 2 sets of screws, 6washers..

Built-In Electrical Box Easy Installation This Siding Mounting Block Comes With A Pre-Installed Electrical Junction Box And Cable Connector Simply Drill One HoleRun The WireAnd Secure With Included Screws For Quick Setup On Your Vinyl Siding. Perfect Fit For Vinyl Composite Siding Engineered Specifically To Snugly Fit 12 Inch Vertical Lap Siding Profiles Also Compatible With Other Flat Surfaces Like Fiber Cement Boards And T-111 For Versatile Application. Weather-Resistant Paintable Design Features A Textured Surface And A Bottom Drainage Hole To Prevent Water Accumulation Made Of Sturdy Plastic That You Can Paint The Lamp In Any Color You Want To Seamlessly Match Your Home's Exterior. Secure Mounting For Outdoor Fixtures Provides A StableFlush-To-The-Siding Base For Mounting Various Exterior Fixtures Such As Wall LightsFloodlightsMotion Sensor Lights. Complete Mounting Kit Included The Package Contains Two Mounting Block With Integrated Electrical BoxTwo Cable ConnectorAnd Eight Mounting ScrewsProviding All Essential Components To Complete Your Outdoor Lighting Project.

Premium QualityWith textured black surface, this siding mounting block is made of solid and sturdy plastic material. You may also paint the fixture to finish with your desired colors to match the color with your vinyl siding or just fine left with its natural color. Good snug fit on 4 inch to 10 inch height siding with 12 inch lap.. Compact SizeThis siding mounting block set is 6.63 inches wide by 6.63 inches high. Perfect solution for 12 inch width lap siding surface of 4 inch to 10 inch height. The molding and blocks can also be painted after being caulked. Note To stop water from penetrating the electrical box, you must seal the top of the box except the drainage hole on the bottom.. Easy to InstallThis siding mounting kit with built-in electrical box is super easy and fast to install on Vinyl siding.1 Drill the hole through the siding lap to put a wire through the hole outside. 2 Cut the desired opening along the patterns provided on the backside.Or there's also a drilling support in the middle of the block that is supplied for drilling custom sized round holes to put the wire through if needed. 3.Put the wire through the cable connector and mount the box up.. Widely ApplicationsThe siding mounting kit can mount all exterior accessories like light fixtures, cameras, doorbell on all siding types, including T-111, HardiePlank Lap Siding, and other flat surfaces. It makes adding new lighting to existing siding more easy with the built in electrical box.. Package IncludedThere are a Mounting Block with Built-in Electrical Box on the package. You could install an exterior light pn Vinyl Siding with a mounting plate as you want. Note If the size of the Mounting Block does not match your siding surface, caulk around the top of the siding mounting kit..

Surface Upgrade The vinyl outdoor light siding mount are made of thick and high-quality plastic, with a sturdy feel. The vinyl lamp block is white and the surface upgrade can be painted to match the color of the vinyl siding or light.. Easy to InstallThis siding mounting kit with built-in electrical box is super easy and quick to install on Vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2. Remove the knock out object from the electrical box and insert the cable connector into the hole. 3. Thread the wires through the cable connector and install the box using the included connector. 4. Place the external light on the electrical box.. Wide ApplicationThe siding mounting kit can mount light fixtures on all siding types, including T-111 and HardiePlank Lap Siding. It makes adding new lighting to existing siding easier with a built-in electrical box.. Compact SizeThe set of siding mounting blocks are 6.53 inches wide and 10.23 inches long. The perfect solution for 4 inch tall vinyl siding with dual 12 inch wide lap siding surfaces. After caulking, the moldings and blocks can be painted.. Package ContainsYou will receive 2 sets of Vinyl Siding Mounting Blocks, including 2 white vinyl siding mounting blocks, 2 NM cable connectors and 10 screws. NOTE If the size of the mounting block does not match your siding surface, caulk around the top of the siding mounting kit..

Versatile UseGuardian of the Family. Provides smooth, vinyl siding mounting block for exterior accessories such as light fixtures, cameras, national flag, and fixture doorbells on all wall plate types including T-111, HardieLank lap wall plates and flat surfaces.. TrustworthyThe siding mounting block for outdoor lights is made of thick, quality plastic and has a solid feel to it. Outdoor light siding mount is white and surface upgrade can be painted to match the color of the vinyl siding or light. Good snug fit on 4 inch to 10 inch height siding with 12 inch lap.. No need to worryThis siding light mounting block set is 6.63 inches width by 6.63 inches length. Ideal solution for 12 lap siding double. Please check the size data in the picture. If you find that your vinyl siding is not suitable, it doesn't matter. You can placed some caulking and then painted the blocks and molding.. Easy to IntallThis vinyl siding light mounting block simplifies installation on vinyl siding.1 Drill the hole through the siding lap to put a line through the hole outside. 2 Cut the desired opening along the patterns provided on the backside.Or there's also a drilling support in the middle of the block that is supplied for drilling custom sized round holes to put the line through if needed. 3.Put the line through the cable connector and mount the box up.. Package ContainsVinyl siding mounting plate, Cable Connectors for complete installation. Important Seal the top of the box excluding the drainage hole at the bottom to stop water intrusion into the mounting block..

Surface upgradeThe Vapikirv outdoor light siding mount is made of thick, quality plastic and has a solid feel to it. Vinyl light block is white and surface upgrade can be painted to match the color of the vinyl siding or light.. Easy to useFast and easy to install this octagon siding mounting kit. Run wires through center punch hole. Safer to have your wires in a box. There is a weep hole on the bottom that needs to be left open to allow any water that does deep in behind the block to escape.. Size DetailsSize 4 Inch Diameter X 6.61 Inch Width X 0.5 Inch Depth X 6.61 Inch Height. For 12 lap siding. Please check the size data in the picture. If you find that your vinyl siding is not suitable, it doesn't matter. You can placed some caulking and then painted the blocks and molding. You will need to caulk around the top of the box to prevent water from infiltrating the electrical box.. Applicable TypesSiding mounting block allows mounting light fixtures on all siding types including T-111, HardiePlank lap siding, and flat surfaces. The built-in electrical box design makes it very easy to install.. Package ContainsYou will receive a white vinyl siding mounting blocks, NM cable connector and 5 screws. We're proud of our customer service, and your satisfaction is very important to usNote If the size of the Mounting Block does not match your siding surface, caulk around the top of the siding mounting kit..

Sturdy and Durable This siding mounting block is made of solid and sturdy plastic with textured and paintable white surface. You can paint the fixture to match your vinyl siding or leave it in its natural off-white finish.. Widely Applications The vinyl siding mounting block can be used to mount light fixtures on all siding types, including T-111, HardiePlank lap siding, and other flat surfaces. You can install outdoor devices, such as cameras and outdoor lights.. Just 5 MIN Easy to install this siding light mounting block. You can complete it independently. We have detailed instructions for your reference. Fit only 12-inch lap double and 4-inch height siding. For other sizes, you can modify it yourself.. Product Size This vinyl siding light mounting block set is 6.53 inches in width and 10.23 inches in length. To stop water from penetrating the mounting block, be sure to seal the top of the box except the drainage hole at the bottom.. Package Includes Our siding mounting kit contains a siding mounting plate, an instruction manual, a cable connector, and mounting screws, providing all the necessary materials to complete your project efficiently and quickly..

Designed for 12 Lap Double Siding Specifically made for vinyl siding with a double 12-inch width lap, ensuring a secure and professional installation.. Versatile Mounting for All Siding Types Compatible with T-111, HardiePlank Lap Siding, and flat surfaces, this Outdoor Light Mounting Block offers unmatched versatility for outdoor light fixtures, security cameras, and more.. Built-in Electrical Box Ensures safe and code-compliant installation of outdoor light fixtures, making it easy to install after siding is up.. Textured, Paintable SurfaceThe textured surface of this Paintable Siding Mount can be painted to match your homes exterior.. Complete Installation Kit Including the 8141DBL Siding Mounting Block, NM cable connector, and 6 screws, for a hassle-free setup.. Product Dimensions 10.23 x 6.53 x 1.1 inches.

- This vinyl siding mounting block is specifically designed for siding with a 12'' lap and an overlap greater than 3.4, ensures a snug fit for 4-inch overlap and 12'' thick lap siding. - Simple and quick installation process, this outdoor light mounting block can save you time and effort, comes with clear instructions for easy setup. -These vinyl siding light mounting blocks are made from heavy-duty nylon for long-lasting durability in all weather conditions, textured and paintable surface for a high-quality finish. - Siding light mounting block can easily mount light fixtures, cameras, flag poles, and doorbells on various siding types, compatible with T-111, for HardiePlank Lap Siding, and other flat surfaces. - This siding block is of superior quality compared to competitors with a textured and paintable white surface, compact size perfect for 12 inch width lap siding surfaces. Mounting Block with Built-in Electrical Box, Cable Connectors, and Mounting Screws for a complete installation. Caulk around the top of the siding mounting kit for a customized fit if needed.

UNIVERSAL BRACKT Our flexible installation bracket with fastener and decorative nuts to mount light fixture on a canopy or electrical junction box. It is designed for anyone who is having trouble aligning the bracket holes of their light fixture with their junction box or for those who have lost their mounting plate or screws.. PREMIUM MATERIAL Made of zinc plated steel, our high-quality swivel plate is crafted with precision cutting and careful polishing treatment. It is robust, rust-resistant, and suitable for light to medium projects, ensuring safe use and long lifespan.. EASY TO INSTALL With multiple adjustment points, the flexible crossbar fits most standard and old-style junction box. Different length bolts and nuts make a sturdy connection. Work well with most wall sconces, close to ceiling lights, pendants, chandeliers, vanity lights, and more.. ONE-STOP PURCHASE The mount hardware kit contains everything you need to install the fixture 2x mounting plates, 6x wiring caps, 4x long mounting screws, 4x short mounting screws, 4x silvery cap nuts, 4x black cap nuts, 2x ground screws, 4x lock nuts.. BUY WITH CONFIDENCE We offer a one-year warranty. If therere any issues with our product, please contact us through the Amazons Buyer-Seller Messaging Service, we will respond within 24 hours.. NOTE These may NOT strong enough for heavy fixtures like ceiling fans or ceiling fan lights..

This siding mounting block is specifically designed for 12'' lap siding with a 4-inch overlap, ensuring a snug fit. The vinyl siding light mounting block is simple and quick setup with clear instructions, saving time and effort. Your outdoor light mounting block is made from heavy-duty nylon for durability, with a textured, paintable surface. Siding mounting kit can mounts various fixtures on different siding types, for T-111, for HardiePlank Lap Siding. ? Mounting blocks for exterior lights are of superior quality with a textured, paintable white finish, ideal for 12 inch lap siding. ? Mounting Block with Electrical Box, Cable Connectors, and Screws for complete installation. Caulk can be used for a custom fit around the top of the mounting kit if necessary.

Octagonal Design Are You Also Worried About Installing Outdoor Lighting Fixtures on Vertical Siding This Vertical Siding Light Mounting Kit, Octagonal Design Can be Easily and Quickly Installed on Vinyl Siding, with a Built-in Box, Designed to Facilitate Your Outdoor Lighting Installation, Except for the Drainage Hole at the Bottom to Prevent Water From Seeping into the Electrical Box. Electrical Box Size 4 Inches Diameter x 12 Inches Deep. Flat Mount 12 inch Lap Siding Type Perfect for 12 inch Lap Siding Surface, Package Includes a white Mounting Block with Built-in Electrical Box, a Cable Connector and Four Mounting Screws. High-quality Material Vinyl Siding Mounting Block Kit is Made of High-Quality Plastic with Clear Surface Texture and Can be Painted. You Can Paint the Lamps in the Color You Want. The Mounting Block is Well-Made, Sturdy and Beautiful, and Fits Tightly with the 12 inch wide Lap Siding Surface. Easy to install This Siding Mounting Kit with Built-in Distribution Box Can Be Easily and Quickly Installed on Vinyl Siding. First Drill Holes in the Siding Lap, Insert the Cable Connector, Install the Box with Screws, and then Place the Exterior Lighting. Widely Used The Versatile Siding Mounting Block Can Be Used on a Variety of Siding Types, Including for T-111 and for HardiePlank Lap Siding, and the Built-in Electrical Box Makes it Easier for You to Add New Lighting to the Siding.

Perfect Size This siding mounting block is specifically designed for 12'' lap siding with a 4-inch overlap, ensuring a snug fit. Durable Materials Our vinyl siding mounting block is made of high-quality UV resistant plastic, providing a solid feel. The vinyl siding light block is white, and the surface can be painted to match the color of your vinyl siding or lighting. You can DIY for yourself. Easy to Install This siding mounting kit with built-in electrical box is super easy and quick to install on Vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2. Remove the knock out object from the electrical box and insert the cable connector into the hole. 3. Thread the wires through the cable connector and install the box using the included connector. 4. Place the external light on the electrical box. Widely Applications The siding mounting kit can mount light fixtures on all siding types, including T-111, HardiePlank Lap Siding, and other flat surfaces. It makes adding new lighting to existing siding more easy with the built in electrical box. NoteOnly fit for 4 inch height of the Vinyl Siding with double 12 inch width lap siding surface. Package Contains You will receive 2 sets of Vinyl Siding mounting Blocks with Electrical Box, Cable Connectors, and Screws for complete installation. NOTE If the size of the mounting block does not match your siding surface, caulk around the top of the siding mounting kit.

Effortless Installation The outdoor light mounting module features a built in junction box and NM cable connector, providing a quick and easy installation process for customers. NOTE Thread the wire leaving 7.9 inches of cable.. Customizable Finish With a paintable finish, the lamp mounting kit allows you to the color to seamlessly match your home's color scheme. Whether you prefer a classic look or want to make a bold statement, this feature offers the flexibility to achieve the desired aesthetic.. Rugged And Versatile Material Constructed from robust ABS material, the siding light mounting block is compatible with various siding options, providing flexible installation choices for different finishes. Its rugged construction ensures a long lasting solution while preventing excessive damage to your walls during installation.. Wide Compatibility Specifically designed to fit 12 inch wall panels, this light fixtures siding mounting block is versatile and suitable for a range of applications. Whether you're installing outdoor lighting fixtures, wall mounted lamps, or other electrical components, it meets multiple needs effectively.. Enhanced Wall Guard The thoughtful design of the lamp siding mounting block ensures that your walls are not excessively damaged during installation. This focusing on preserving the integrity of your siding enhances the overall functionality and aesthetics of your outdoor lighting setup..

Secure Fit for 12 Double Lap Siding Specifically designed for vinyl siding with a double 12 lap, ensuring a tight, wobble-free hold for outdoor fixtures.. Universal Compatibility Works with T-111, HardiePlank, flat surfaces, and more, making it ideal for lights, cameras, and sensors.. Electrical Box Included Meets safety standards for outdoor wiring, allowing easy installation even after siding is applied.. Complete 2-Pack Kit Includes mounting block, NM connector, and screws x6 per kitno extra parts needed. Paintable Weather-Resistant Textured finish matches your homes exterior and withstands harsh outdoor conditions.Ideal for outdoor lighting, security cameras, motion sensors, and more.. Dimensions 10.2 x 6.53 x 1.1 per unit.

Premium Material Paintable SurfaceCrafted from high-quality, thick plastic, this vinyl siding mounting block is durable and sturdy. The surface is paintable to seamlessly match your vinyl siding or light fixture, ensuring a cohesive aesthetic.. Compact SizeThis siding mounting block set is 6.53 inches width by 10.23 inches length. Perfect solution for 4 inch height of the Vinyl Siding with double 12 inch width lap siding surface. The molding and blocks can be painted after being caulked.. Easy to InstallThis siding mounting kit with built-in electrical box is super easy and fast to install on Vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2.Remove the knock-out from the electrical box and insert the cable connector into the hole. 3.Put the wire through the cable connector and mount the box up with the included couple srcews. 4.Put the outside light in place on the electrical box.. Widely ApplicationsThe siding mounting kit can mount light fixtures on all siding types, including T-111 and HardiePlank Lap Siding. It makes adding new lighting to existing siding more easy with the built in electrical box.. Package ContainsYou will receive a white vinyl siding mounting blocks, NM cable connector and 5 screws. Note If the size of the Mounting Block does not match your siding surface, caulk around the top of the siding mounting kit..

Premium QualityCrafted from solid and durable ABS, this siding mounting kit boasts a textured, paintable white surface for a premium look. Customize the fixture to match your vinyl siding or leave it in its natural color, ensuring a perfect fit on 12-inch lap siding surfaces. Easy to InstallThis siding mounting kit with built-in electrical box is super easy and fast to install on Vinyl siding.1 Drill the hole through the siding lap to put a wire through the hole outside. 2 Cut the desired opening along the patterns provided on the backside.Or there's also a drilling support in the middle of the block that is supplied for drilling custom sized round holes to put the wire through if needed. 3.Put the wire through the cable connector and mount the box up. Widely ApplicationsVersatile design allows mounting on various siding types, including for T-111 and for HardiePlank Lap Siding, making adding new lighting to existing siding a breeze. Compact SizeThis siding mounting block set is 6.63 inches wide by 6.63 inches high. Perfect solution for ONLY 12 inch width lap siding surface of 4 inch to 10 inch height. The molding and blocks can also be painted after being caulked. Note To stop water from penetrating the electrical box, you must seal the top of the box except the drainage hole on the bottom.

Ideal for T-111, HardiePlank lap siding, shingles, and other flat vertical surfaces. 8161 Outdoor Light Mounting Block offers versatility for outdoor light fixtures, security cameras, and more.. Textured, Paintable SurfaceThe textured surface of this Paintable Siding Mount can be painted to match your homes exterior.. Fast Post-Siding Installation Easily retrofit after siding is installed. Just caulk, feed the cable, and secure with screws for a hassle-free setup.. Weatherproof Made from ABS plastic with a textured white surface .. Package Includes 2 x 8161 Withe Mounting Blocks with Built-In Electrical Box, 2 x NM Cable Connectors, 8 x Mounting Screws.. Designed specifically for 58 lap siding.Dimensions L x W x H6.61L x 6.61W x 0.5H,4 diameter x 12 deep. Cubic Capacity 6.8.

Rugged and Versatile Material Constructed from robust plastic material, the siding light mounting block is compatible with various siding options, providing flexible installation choices for different finishes. Its rugged construction ensures a long lasting solution while avoiding excessive damage to your walls during installation.. Secure Professional Fit for 12 Lap Siding Specifically designed for double 12 vinyl siding, ensuring a flush, weather-resistant installation for outdoor lights, cameras, and more.. Effortless Installation The outdoor light mounting module features a built in junction box and NM cable connector, providing a quick and easy installation process for customers. This design streamlines the setup, allowing you to get your lighting fixtures up and running with minimal hassle.. Enhanced Wall Guard The thoughtful design of the lamp siding mounting block ensures that your walls are not excessively damaged during installation. This focusing on preserving the integrity of your siding enhances the overall functionality and aesthetics of your outdoor lighting setup.. Complete 4-Pack Kit with Hardware Includes 4pc mounting blocks, NM cable connectors, and screws for quick, hassle-free setup.Product dimensions 25.8x17x2.4cm10.16x6.69x0.94inch.

Size DetailsVapikirv vinyl siding mounting block is made of thick and sturdy plastic material, with textured and paintable white surface. About size 6.63 Inch W X 6.63 Inch H. Good snug fit on 4 inch to 10 inch lap siding.Choosing this siding mounting plate is an excellent option for12 inch width lap siding surface.. Easy to InstallThis vinyl siding mounting box simplifies installation on vinyl siding. 1 Drill holes in the wall lap siding block and run lines through the holes on the outside. 2Cut the desired opening along the pattern provided on the back of the vinyl siding mounting blocks. 3Run the lines through the custom-sized holes and secure the siding mounting blocks. Designed to snugly fit 4-inch to 10-inch lap siding.. Widely ApplicationsGuardian of the Family. Provides smooth, vertical octagon mounting block for exterior accessories such as light fixtures, cameras, national flag, and fixture doorbells on all wall plate types including T-111, HardieLank lap wall plates and flat surfaces. Note To stop water from penetrating the block, you must seal the top of the block except the drainage hole on the bottom.. Support DIYVinyl siding mounting kit can be painted to match the color of the vinyl siding or light. Sure, you can leave it in its natural black color.. Package IncludedYou will receive two siding mounting blocks on the package. You could easy installation of exterior lights on vinyl siding using a mounting plate of your choice..

Premium QualityWith textured and paintable white surface, this siding mounting block is made of solid and sturdy plastic material. You may also paint the fixture to finish with your desired colors to match the color with your vinyl siding or just fine left with its natural off-white color. Good snug fit on 4 inch to 10 inch lap siding.. Compact SizeThis siding mounting block set is 6.63 inches wide by 6.63 inches high. Perfect solution for double 12 inch width lap siding surface. The molding and blocks can also be painted after being caulked. Note To stop water from penetrating the electrical box, you must seal the top of the box except the drainage hole on the bottom.. Easy to InstallThis siding mounting kit with built-in electrical box is super easy and fast to install on Vinyl siding.1 Drill the hole through the siding lap to put a wire through the hole outside. 2 Cut the desired opening along the patterns provided on the backside.Or there's also a drilling support in the middle of the block that is supplied for drilling custom sized round holes to put the wire through if needed. 3.Put the wire through the cable connector and mount the box up.. Widely ApplicationsThe siding mounting kit can mount all exterior accessories like light fixtures, cameras, doorbell on all siding types, including T-111, HardiePlank Lap Siding, and other flat surfaces. It makes adding new lighting to existing siding more easy with the built in electrical box.. Package IncludedThere are a Mounting Block with Built-in Electrical Box on the package. You could install an exterior light pn Vinyl Siding with a mounting plate as you want. Note If the size of the Mounting Block does not match your siding surface, caulk around the top of the siding mounting kit..

For use with Kohler Artifacts T72790-9M, Purist T97328-4, Stillness T97344-4, Margaux T97331-4, Kelston T97332-4 and Composed T73087-4 freestanding bath fillers. 12-inch connections. Test cap and mud guard included. Brass and metal construction. Can be installed without required freestanding bath filler.

Premium PVC material The siding mounting kit is made of sturdy PVC material with a black, paintable finish. to match the color of the vinyl siding mounting block. 8141DBL Outdoor Siding Light Mounting Block For 12 in. double ply and 4 in. high siding.. The built-in junction box is designed to enclose the electrical connections and wiring for the outdoor light fixture, providing protection against moisture and environmental elements.. Model 8141-1 Vertical Siding Octagon Mounting Kit with Built-In 12-Inch 0.5-Inch Outdoor Vertical Siding LAP Box is a product specifically designed for mounting outdoor light fixtures on vertical siding. Since it is intended for outdoor use, the kit is constructed from weather-resistant materials to withstand exposure to the elements.. Size Electrical box dimensions 4 diameter x 12 deep. Flat Surface Mounting Siding Type 12 Inch Lap Material UV Rated Plastic Capacity 6.8 Cubic Inch Size 4 Inch Diameter X 6.61 Inch Width X 0.5 Inch Depth X 6.61 Inch Height. We attach great importance to product quality, find us in the following ways if you have any issue Ask a question on our storefront or in YOUR ORDER options click the Contact Seller.

Premium QualityWith textured and paintable white surface, this siding mounting kit is made of solid and sturdy plastic material. You may also paint the fixture to finish with your desired colors to match the color with your vinyl siding or just fine left with its natural color. Good snug fit on 12 inch width lap siding surface.. Compact SizeThis siding mounting block set is 6.53 inches width by 6.53 inches length. Perfect solution for 12 inch width lap siding surface. The molding and blocks can also be painted after being caulked. Note To stop water from penetrating the electrical box, you must seal the top of the box except the drainage hole on the bottom.. Easy to InstallThis siding mounting kit with built-in electrical box is super easy and fast to install on Vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2.Remove the knock-out from the electrical box and insert the cable connector into the hole. 3.Put the wire through the cable connector and mount the box up with the included couple srcews. 4.Put the outside light in place on the electrical box.. Widely ApplicationsThe siding mounting kit can mount light fixtures on all siding types, including T-111, HardiePlank Lap Siding, and other flat surfaces. It makes adding new lighting to existing siding more easy with the built in electrical box.. Package IncludedThere are a Mounting Block with Built-in Electrical Box, a Cable Connectors and four Mounting Screws on the package to ensure you have enough supplies to complete your projects. You could install an exterior light pn Vinyl Siding with a mounting plate as you want. Note Caulk around the top of the siding mounting kit if the size of the Mounting Block does not match your siding surface..

Perfect Fit Designed for 12 inch lap Siding, this 8141 siding light mounting block delivers a precise, secure fit and provides a stable, professional-looking installation surface. Durable Material This 8141 vinyl siding mounting block made from weather-resistant plastic to withstand rain, sunlight and temperature changes for long-term outdoor use. Complete Installation Kit Including 2 pcs 8141 white vertical siding lamps, 2 pcs cable connectors, 4 pcs short screws and 4 pcs long screws, for a hassle-free setup. Wide Application Siding mounting blocks kit, is compatible with various siding types, such as electrical boxes, dryer vents, cameras and wide range of fixtures, enhancing flexibility and convenience. Easy Installation The vertical lamps mounting plate with built-in electrical box installs quickly on vinyl sidingsimply open the unit, replace the internal component, reassemble, and it's ready to use.

White Siding Mounting Kit Siding mounting block can be used for T-111, HardiePlank Lap Siding, and other flat surfaces. Only fit for 4 inch to 10 inch height of the vinyl siding with 12 inch width lap siding surface. Siding Blocks for Vinyl Siding Vinyl siding light block is 6.57 inches long and 6.57 inches wide. Vinyl siding mounting kit can adapt to vinyl wall panels ranging from 4 inches to 10 inches in height, and perfectly match with fixed devices such as lighting fixtures, cameras, doorbells, etc.. Protective Function Vinyl siding mount can form a stable base, making your lighting fixtures and other devices more securely installed. It avoids unsightly gaps caused by direct installation, making your vinyl exterior siding more aesthetically pleasing. Durable Material Vinyl siding light mounting block is made of solid and sturdy plastic material, which is not afraid of wind and rain, and is not easy to crack or warp. Durable and sturdy, supporting long-term outdoor use. Easy to Use Firstly, thread the wires through the siding holes. Secondly, cut the required opening according to the shape. Then, drill holes to fix installation blocks. Finally, place outdoor lighting fixtures on the installation box. Note Mounting hardware and screwsare not included.

White Siding Mounting Kit Siding mounting block can be used for T-111, HardiePlank Lap Siding, and other flat surfaces. Only fit for 4 inch to 10 inch height of the vinyl siding with 12 inch width lap siding surface. Siding Blocks for Vinyl Siding Vinyl siding light block is 6.57 inches long and 6.57 inches wide. Vinyl siding mounting kit can adapt to vinyl wall panels ranging from 4 inches to 10 inches in height, and perfectly match with fixed devices such as lighting fixtures, cameras, doorbells, etc.. Protective Function Vinyl siding mount can form a stable base, making your lighting fixtures and other devices more securely installed. It avoids unsightly gaps caused by direct installation, making your vinyl exterior siding more aesthetically pleasing. Durable Material Vinyl siding light mounting block is made of solid and sturdy plastic material, which is not afraid of wind and rain, and is not easy to crack or warp. Durable and sturdy, supporting long-term outdoor use. Easy to Use Firstly, thread the wires through the siding holes. Secondly, cut the required opening according to the shape. Then, drill holes to fix installation blocks. Finally, place outdoor lighting fixtures on the installation box. Note Mounting hardware and screwsare not included.

EASY INSTALLATIONSave time and effort with this vinyl siding light mounting block. It features a simple and quick setup process with clear instructions, making installation a breeze... HOW TO INSTALL1.Drill the hole through the siding lap to put a wire through. 2.Insert the cable connector intothe hole. 3.Put the wire through the cable connector and mount the box up with srcews. 4.Put the outside light in place on the electrical box.. MAIN MATERIALThis siding mounting kit is constructed from heavy-duty plastic, providing long-lasting strength. The textured, paintable surface adds a touch.. COMPACT SIZEGood solution for 4 inch height of the Vinyl Siding with double 12 inch width lap siding surface. The built-in electrical box design makes it very easy to install.. SIZE DETAILSSize about 25.98x16.59x2.79cm10.23x6.53x1.1inch.Note If the size of the Mounting Block does not match your siding surface, caulk around the top of the siding mounting kit..

Use instead of nails or screws. Works on many surfaces including finished and Painted surfaces, metals, Acrylic and hard plastics and other smooth hard surfaces. Weight capacity 8-strips holds up to 12-pounds, 1-strip per 1. 5-Pounds. Size 1 x 3 Inch.

Simplified Installation The siding mounting block has a built-in electrical distribution box and NM cable connector to ensure a quick and hassle-free installation process for customers. You can install siding mounting block as needed.. Compatible with a Wide Range of Siding Panels Vinyl siding mounting blocks are designed to be compatible with a wide range of siding materials, providing flexible installation options for different exterior finishes. It can ensure that your wall is not excessively damaged. Quality Materials Vinyl siding mounting block have been crafted from quality materials to ensure durability and provide a reliable solution for outdoor lighting needs. The vinyl siding high-quality materials are sturdy and beautiful, ensuring that your light fixtures will be securely in place for years to come. Paintable Finish vinyl siding paintable finish allows for customization, allowing you to paint the fixture the color you want to match your home's exterior color scheme, blending seamlessly with the siding for a polished look.. Seamless Finishes Achieve a seamless look with vinyl siding mounting block to maintain a neat, professional appearance for your exterior lighting fixtures. Enhance your outdoor space with tools and furniture finishes from DZHPSRSZ..

Made in United States. Package length 0.88. Package width 6.63. Package height 6.63.

Surface Upgrade The vinyl outdoor light siding mount are made of thick and high-quality plastic, with a sturdy feel. The vinyl lamp block is black and the surface upgrade can be painted to match the color of the vinyl siding or light.. Easy to InstallThis siding mounting kit with built-in electrical box is super easy and quick to install on Vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2. Remove the knock out object from the electrical box and insert the cable connector into the hole. 3. Thread the wires through the cable connector and install the box using the included connector. 4. Place the external light on the electrical box.. Compact SizeThe set of siding mounting blocks are 6.9 inches wide and 10.2 inches long. The perfect solution for 4 inch tall vinyl siding with dual 12 inch wide lap siding surfaces. After caulking, the moldings and blocks can be painted.. Package ContainsYou will receive 2 sets of Vinyl Siding Mounting Blocks, including 2 black vinyl siding mounting blocks, 1 Screwdriver, 2 NM cable connectors and 10 screws. NOTE If the size of the mounting block does not match your siding surface, caulk around the top of the siding mounting kit.. Wide ApplicationThe siding mounting kit can mount light fixtures on all siding types, It makes adding new lighting to existing siding easier with a built-in electrical box..

1 EACH.

Vinyl Siding Surface Block Plate. High-Quality Durable. Textured Paintable Surface. Exact item is pictured - Sealant NOT included. Color White Quantity 1 Plates Made in USA. Designed for 4 to 10 Vinyl Siding with 12 overlap.

Premium Material These vinyl siding mounting blocks are made of durable ABS plastic with a textured, paintable surface, and they provide a seamless look on 12 inch lap siding. Universal Size Compatibility This 130110006001 octagon wall plate measures 6.63 x 6.63 inches, and it fits 12 inch lap siding from 4 to 10 inches in height, ensuring a flush mount. Wide Application This siding mounting kit supports light fixtures, cameras, doorbells, and motion sensors, and it works with multiple siding types for versatile home use. Weather-resistant Design This vertical octagon mounting blockbase has drainage holes at the bottom apply sealant along the top edge to prevent rainwater ingress and keep wiring dry. Easy Installation This vinyl siding mounting kit installs easily by drilling through the siding lap to feed wires, cutting along pre-marked patterns, and securing the box, with no special tools needed.

Made of durable polyethylene. Features 2 - 10 deep steps. Built in handle for easy lifting. Ideal for mounting, grooming or other barn chores. Can hold up to 300 lbs. Made in the USA.

Surface Dimensions 8-316 x 8-316. J-Channel Inside Dimensions12 Adjusts to 1-14. Round Knockout 3-1116. Material Vinyl. Package Quantity 1.

The Builders Edge Surface Block for Dutch lap for installing fixtures after the siding has been applied to the home for use on Dutch Lap siding. Mounting blocks are durable, maintenance-free, UV stabilized and constructed with color molded-through so they won't scratch, flake, or fade. Our patented Snap-On Trim Ring makes installation easy. Country of Origin United States.

Paintable, Textured surface. Built in electrical box. No loose parts, one piece design. UV Rated Plastic for long outdoor life. NM Cable connector included.

Mounting blocks are durable, maintenance-free, UV stabilized and constructed with color molded-through so they won't scratch, flake, or fade. Our patented Snap-On Trim Ring makes installation easy. The Builders Edge Jumbo Mounting Block provides a surface for larger coach lamps and smaller electrical and water meters. Country of Origin United States.

The Builders Edge Surface Block for installing fixtures after the siding has been applied to the home, for use on 4 inch-10 inch siding. Mounting blocks are durable, maintenance-free, UV stabilized and constructed with color molded-through so they won't scratch, flake, or fade. Our patented Snap-On Trim Ring makes installation easy. Package Dimensions 2.54 L x 17.78 H x 17.78 W centimeters.

The Builders Edge Surface Block for installing fixtures after the siding has been applied to the home, for use on 4 inch-10 inch siding. Mounting blocks are durable, maintenance-free, UV stabilized and constructed with color molded-through so they won't scratch, flake, or fade. Our patented Snap-On Trim Ring makes installation easy.

Item Weight 2.2 lb. Country of Origin United States. Brand name Builders Edge. Item Dimensions 12.0L x 9.5W x 6.5H.

he Builders Edge Surface Block for Dutch lap for installing fixtures after the siding has been applied to the home for use on Dutch Lap siding. Mounting blocks are durable, maintenance-free, UV stabilized and constructed with color molded-through so they won't scratch, flake, or fade. Our patented Snap-On Trim Ring makes installation easy. Country of Origin United States.

STEPS?MOUNTING?3?STEP?0093. BLACK?HORSE?P. Available in a variety of colors. Sturdy high-density polyethylene construction. Dimensions 21H x 18.75W in..

Mounting blocks. Mounting blocks utlity vents. Siding, Trim Coil Accessories.

White meter base j-block. The meter base J-Block is designed to mount large accessories such as hose racks and electrical met. Manufactured with ultraviolet-stabilized color, minimizing the effects of exposure to the elements. Compatible with all siding profiles. Rich textured appearance.

Made in United States.

Cover with Flanges included. Siding Types All Types. UV Rated Plastic for long outdoor life. Paintable for a custom finish. Smoothly mount vertical fixtures and receptacles.

Used for installing spigots, gas lines, bib lines and door bells. Easy installation. Paintable and durable nailing flange.

Made in the USADurable lightweight polyethene constructionBuilt-in handle provides easy lifting300 lb max weight capacity.

Quantity 1 each This product comes in a pack of one. Mounting Type Wall Mount This mounting block is designed for wall mounting. Color White This product is available in white. Material Plastic, Acrylonitrile Butadiene Styrene ABS This mounting block is made of durable plastic and ABS. Dimensions 7 inches x 7 inches The surface dimensions of this mounting block are 7 inches by 7 inches.

Made in United States.

Perfect Sizing This siding mounting block is specifically designed for 12'' lap siding with a 4-inch overlap, ensuring a snug fit. Easy Installation The vinyl siding light mounting block is simple and quick setup with clear instructions, saving time and effort. Premium Quality Your outdoor light mounting block is made from heavy-duty nylon for durability, with a textured, paintable surface. Versatile Use Siding mounting kit can mounts various fixtures on different siding types, for T-111, for HardiePlank Lap Siding. Competitive Edge Mounting blocks for exterior lights are of superior quality with a textured, paintable white finish, ideal for 12 inch lap siding. Package Contents Mounting Block with Electrical Box, Cable Connectors, and Screws for complete installation. Note Caulk can be used for a custom fit around the top of the mounting kit if necessary.

Perfect Sizing This siding mounting block is specifically designed for 12'' lap siding with a 4-inch overlap, ensuring a snug fit. Easy Installation The vinyl siding light mounting block is simple and quick setup with clear instructions, saving time and effort. Premium Quality Your outdoor light mounting block is made from heavy-duty nylon for durability, with a textured, paintable surface. Versatile Use Siding mounting kit can mounts various fixtures on different siding types, for T-111, for HardiePlank Lap Siding. Competitive Edge Mounting blocks for exterior lights are of superior quality with a textured, paintable white finish, ideal for 12 inch lap siding. Package Contents Mounting Block with Electrical Box, Cable Connectors, and Screws for complete installation. Note Caulk can be used for a custom fit around the top of the mounting kit if necessary.

Improve Safety of Use It comes with an octagonal electrical junction box to prevent wires from being exposed, waterproof and dustproof, protect electrical equipment from external factors, and provide a safe and reliable wiring space. Reliable and Durable Made of high-strength engineering plastics, it is waterproof and moisture-proof, not easy to fade or deform, and can easily cope with wind, rain and outdoor bad weather to meet your outdoor lighting needs. Exquisite Appearance The black octagonal appearance design enhances the overall beauty of the outdoor space, the surface adopts a black texture design, the workmanship is excellent, and the lamp is more beautiful after installation. Widely Used Outdoor light mounting kit replace 8161, and the installation hole position is standardized. It is perfectly suitable for most wall-mounted lamps, induction lamps, etc., to meet the diverse outdoor lighting needs, flexible and practical. Easy to Install Direct replacement, easy to install, no complex tools or professional skills are required, you can easily complete it yourself in a short time, quickly provide you with a good use experience.

Premium Quality - Crafted from solid and durable Plastic, this siding mounting kit boasts a textured, paintable white surface for a premium look.. Easy Installation - Effortlessly install this siding mounting kit with a built-in electrical box on Vinyl siding. Simple steps Drill a hole through the siding lap, insert the cable connector, mount the box with screws, and place the exterior light.. Compact Size - Measuring 6.53 inches in both width and length, this mounting block set is ideal for 12-inch lap siding surfaces. Easily paintable after caulking, providing a seamless finish for your exterior decor.. All-Inclusive Kit - Comes with 2 long screws, 2 short screws, 1 wiring hub, and instructions for hassle-free setup. No need for additional parts. Wide Applications - Versatile design allows mounting on various siding types, making adding new lighting to existing siding a breeze..

Perfect Size for Your Siding - This vinyl siding mounting block is specifically designed for siding with a 12'' lap and an overlap greater than 3.4, ensures a snug fit for 4-inch overlap and 12'' thick lap siding. Easy to Install - Simple and quick installation process, this outdoor light mounting block can save you time and effort, comes with clear instructions for easy setup. Premium Quality and Great Appearance -These vinyl siding light mounting blocks are made from heavy-duty nylon for long-lasting durability in all weather conditions, textured and paintable surface for a high-quality finish. Wide Applications - Siding light mounting block can easily mount light fixtures, cameras, flag poles, and doorbells on various siding types, compatible with T-111, for HardiePlank Lap Siding, and other flat surfaces. Competitive Advantage - This siding block is of superior quality compared to competitors with a textured and paintable white surface, compact size perfect for 12 inch width lap siding surfaces. Package Includes Mounting Block with Built-in Electrical Box, Cable Connectors, and Mounting Screws for a complete installation. Additional note Caulk around the top of the siding mounting kit for a customized fit if needed.

Perfect Size for Your Siding - This vinyl siding mounting block is specifically designed for siding with a 12'' lap and an overlap greater than 3.4, ensures a snug fit for 4-inch overlap and 12'' thick lap siding. Easy to Install - Simple and quick installation process, this outdoor light mounting block can save you time and effort, comes with clear instructions for easy setup. Premium Quality and Great Appearance -These vinyl siding light mounting blocks are made from heavy-duty nylon for long-lasting durability in all weather conditions, textured and paintable surface for a high-quality finish. Wide Applications - Siding light mounting block can easily mount light fixtures, cameras, flag poles, and doorbells on various siding types, compatible with T-111, for HardiePlank Lap Siding, and other flat surfaces. Competitive Advantage - This siding block is of superior quality compared to competitors with a textured and paintable white surface, compact size perfect for 12 inch width lap siding surfaces. Package Includes Mounting Block with Built-in Electrical Box, Cable Connectors, and Mounting Screws for a complete installation. Additional note Caulk around the top of the siding mounting kit for a customized fit if needed.

Premium QualityWith textured and paintable white surface, this siding mounting kit is made of solid and durable plastic material. You may also paint the fixture to finish with your desired colors to match the color with your vinyl siding or just fine left with its natural off-white color. Good snug fit on for 12 inch Lap Double and 4 inch height Siding.. Compact SizeThis siding mounting block set is 6.53 inches width by 10.23 inches length. Perfect solution for 4 inch height of the Vinyl Siding with double 12 inch width lap siding surface. The molding and blocks can be painted after being caulked. Note To stop water from penetrating the electrical box, you must seal the top of the box except the drainage hole on the bottom.. Easy to InstallThis siding mounting kit with built-in electrical box is super easy and fast to install on Vinyl siding. 1.Drill the hole through the siding lap to put a wire through the hole outside. 2.Remove the knock-out from the electrical box and insert the cable connector into the hole. 3.Put the wire through the cable connector and mount the box up with the included couple srcews. 4.Put the outside light in place on the electrical box.. Widely ApplicationsThe siding mounting kit can mount light fixtures on all siding types, including T-111, HardiePlank Lap Siding, and other flat surfaces. It makes adding new lighting to existing siding more easy with the built in electrical box.. Package IncludedThere are a Mounting Block with Built-in Electrical Box, a Cable Connectors and four Mounting Screws on the package to ensure you have enough supplies to complete your projects. You could install an exterior light pn Vinyl Siding with a mounting plate as you want..

Sturdy and DurableSiding Light Mounting Block is made of high quality thickened plastic with a textured paintable finish.It is highly weather resistant and can be used outdoors for a long time.The fixture can be painted the color you want or keep it in its original black color according to your vinyl siding color.. Siding Mounting Block SizeSiding mounting block measures 6.5 inches wide X 10.2 inches high for 4 inch high vinyl siding, double 12 inch wide lap siding.The bottom of the siding mounting block has a drain hole that needs to be opened to allow any water to drain from deep behind the block.. Easy InstallationWall plate mounting kit is easy to install, save time and labor, put the wires in the box for more safety.1.Drill holes in the side panel and pass the wires through the outside.2.Insert the cable connector into the box hole.3.Put the wires through the cable connector and fix the box with screws.4. install the outside light on the electrical box.. Wide Range of UsesWall plate mounting block is suitable for mounting light fixtures on all types of wall plates, including T-111, hardboard lap siding, light fixtures, monitors, doorbells and other flat surfaces.. Package IncludesIncludes 2x black vinyl wall plate mounting block, 8x screws, 2x NM cable connector.If the size of the mounting block does not match the surface of your wall plate, please caulk around the top of the wall plate mounting kit..

Perfect Fit Designed for 12 inch lap double and 4 inch siding, this 8141DBL siding mounting plate delivers a precise, secure fit and provides a stable, professional-looking installation surface. Durable Material This 8141DBL vinyl siding mounting block made from weather-resistant plastic to withstand rain, sunlight, and temperature changes for long-term outdoor use. Complete Installation Kit Including 3 pcs 8141DBL siding mounting block, 3 pcs cable connectors, 6 pcs short screws and 6 pcs long screws, for a hassle-free setup. Wide Application Siding mounting kit is compatible with various siding types, such as electrical boxes, dryer vents, cameras and wide range of fixtures, enhancing flexibility and convenience. Easy Installation The 8141DBL siding mounting kit with built-in electrical box installs quickly on vinyl sidingsimply open the unit, replace the internal component, reassemble, and it's ready to use.

Multifunctional EZlifego Nano-tech Tape- By using the most advanced nano-technology, made of the latest acrylic gel material, our heavy duty two sided adhesive tape has incredibly strong adhesion and excellent durability. The excellent solution to all your DIY mounting project.. Easy to Use- No Tools Required. Powerful 2-Way Bond capability makes objects firmly attached to any surface. Instant Bonding does not require curing or drying stage. It can be easily cut to any size or length you need, all you need to do is stick the tape to the surface of the item.. Traceless Weatherproof- This industrial strength super strong adhesive tape works great on almost any smooth surface indoors or outdoors, such as wall, tile, glass, plastic, metal, marble, ceramic, etc.. Diversified Uses to Meet All Your Needs- Strong Holding Power can effectively mount or repair stuff without drilling hole or nails, fixing or pasting items such as picture hangers, frames, photos, festival decorations, wall paper stickers, posters, hooks, floating shelves, desk holders, carpets, power sockets, art crafts, board shelf, LED, DIY items, school house room decor aesthetic and so on.. EZlifego Tape Is an Essential for Daily Life- Join the 3 million powered by our leading technology, it will bring great convenience to your life Using Tips Be slow and careful during the removal step, our adhesive tape has strong viscosity, which may cause the wall surface to peel off during removal due the unstable nature of the painted wall..

Design and materialThe siding mounting block is designed in Germany and made in China, with UV rated plastic for long outdoor lifeas well as being UL listedbetter appearance, more durable.. DimensionsJowizgo Siding Mounting Kits with Built-in Box, For 4-INCH SIDING, 12 Lap Double, provides for a smooth, vertical mounting of light fixtures on all siding types including T-111, HardiePlank Lap Siding, and flat surfaces.. Easy to useYou may find the siding mounting block is very easy to install, whether you have siding up or not. For a more complete job, you may also paint the fixture to finish with your desired colors. There is a weep hole on the bottom that needs to be left open to allow any water that does deep in behind the block to escape.. User-friendly DesignIf you find that your vinyl siding is not suitable, it doesn't matter. You can placed some caulking and then painted the blocks and molding. You will need to caulk around the top of the box to prevent water from infiltrating the electrical box.. PACKAGE CONTENTYou will receive a white vinyl siding mounting blocks, NM cable connector and 5 screws. Jowizgo promises 100 satisfaction to our customers, if for some reason you are not satisfied with our product, we guarantee 30 days hassle free full refund and 12 months replacement warranty. Try it out today without risk.

All-in-One Design Easy Installation Siding mounting block with integrated electrical box eliminates the need for a separate junction box. Simply caulk, feed the cable, and secure with included screws for a quick post-siding installation. Wide Compatibility for Outdoor Use This vertical siding lamp mounting kit is designed for smooth flat surfaces and is compatible with T-111, HardiePlank Lap Siding, and other flat vertical surfaces, ideal for outdoor light fixtures and security cameras. Durable Weather-Resistant Construction Made from heavy-duty, UV-resistant plastic to withstand sun, rain, and harsh outdoor elements. The textured surface is paintable, allowing you to seamlessly match your home's exterior. Safe and Secure Mounting The built-in octagon electrical box provides a safe, code-compliant space for wiring, protecting connections from moisture and dust to ensure reliable performance. Complete Kit with Everything Included Each pack contains 2 mounting blocks with built-in boxes, 2 NM cable connectors, and 8 mounting screws. Everything you need for a secure and professional installation on two fixtures.

Surface upgradeThe Vapikirv outdoor light siding mount is made of thick, quality plastic and has a solid feel to it. Vinyl light block is white and surface upgrade can be painted to match the color of the vinyl siding or light.. Easy to useFast and easy to install this siding mounting kit. Run wires through center punch hole. Safer to have your wires in a box. There is a weep hole on the bottom that needs to be left open to allow any water that does deep in behind the block to escape.. Size DetailsSize 6.9 Inch W X 10.2 Inch H. For 12 lap siding double 4. Please check the size data in the picture. If you find that your vinyl siding is not suitable, it doesn't matter. You can placed some caulking and then painted the blocks and molding. You will need to caulk around the top of the box to prevent water from infiltrating the electrical box.. Applicable TypesSiding mounting block allows mounting light fixtures on all siding types including T-111, HardiePlank lap siding, and flat surfaces. The built-in electrical box design makes it very easy to install.. Package ContainsYou will receive a white vinyl siding mounting blocks, NM cable connector and 5 screws. Note If the size of the Mounting Block does not match your siding surface, caulk around the top of the siding mounting kit.We're proud of our customer service, and your satisfaction is very important to us.

Durable Paintable MaterialMade from sturdy plastic with a textured white finish, these vinyl siding mounting blocks are built to last. Easily paint them to match your home's exterior or leave the off-white color as is.. Quick Easy InstallationInstall in three simple steps drill, cut, and mount. Easy installation on vinyl wall panels.. Universal CompatibilityThis versatile mounting block works on various siding types, including vinyl, T-111, and HardiePlank. It is ideal for securing outdoor lights, doorbells, and security cameras.. Perfect Snug FitDesigned to fit 12 inch lap siding with heights from 4 to 10 inches. The compact 6.63 x 6.63 design ensures a clean, professional look after installation.. Complete Value PackGet two mounting blocks in one package. This 2-pack offers great value for installing multiple fixtures around your home securely and efficiently..

Size Siding Mounting Block specially designed for 12-inch circle double and 4-inch height lap siding, ensuring seamless waterproof fit. Eliminate the gaps of standard Vinyl Siding Blocks. The Outdoor Mounting Plate kit with Built-in Electrical Box, suitable for a diameter of 4.11 inches and a depth of 0.6 inches, enhancing the aesthetic appearance of outdoor lighting fixtures.. Premium Materials This vinyl siding mounting kit is made of high-density ABS polymer and PC flame-retardant material, this Outdoor Light Mounting Block can withstand extreme temperatures, resist cracking, deformation and fading, and is durable for a long time. The textured and paintable white surface can be DIyed to match the color you need to match the color of your vinyl siding or keep the off-white.. Easy to Install The Outdoor Light Mounting Block comes with pre-marked drilling points and an easy-to-disassemble design, ensuring worry-free wiring 1. Drill a hole in the wall panel and place a wire in the outer hole. 2. Remove the socket from the electrical box and insert the cable connector into the hole. 3. Pass the wire through the cable connector and install the box with the included pair of screws. 4. Put the outside light on the electrical box. Note To prevent water from seeping into the electrical box, all parts except the drainage hole at the bottom must be sealed.. Compatibility The built-in electrical box of the Siding Mounting Kit allows for installation on all types of wall panels, including T-111 and HardiePlank overlapping vinyl Siding Blocks. It makes it easier to add new lighting to the existing siding.. Package IncludedReady-to-use Complete Kit, make sure you have enough consumables to complete your project. Each set includes 1 Siding Mounting Block with an electrical box, 4 anti-corrosion installation screws, and 1 NM cable connector.. Service Support We attach great importance to customer satisfaction. If you have any questions, please feel free to contact us at any time. Note If necessary, installation seams can be customized on the top of the installation kit.. vinyl siding repair kit siding mounting block for light lamp repair kit vinyl siding light mounting block vinyl siding hooks for hanging outdoor siding repair kit vinyl siding light mounting block.

Siding Type 12 lap double. Mounts light fixtures on all siding types, including T-111, HardiePlank Lap Siding, and flat surfaces. Textured, paintable surface. Built-in electrical box design ensures UL listed installation - fast and easy to install after siding is up. Includes NM cable connector and 4 screws.

The Builders Edge Scalloped Mounting Block provides level and waterproof surface for all exterior accessories. Mounting blocks are durable, maintenance-free, UV stabilized and constructed with color molded-through so they won't scratch, flake, or fade. Our patented Snap-On Trim Ring makes installation easy. Package Dimensions 1.5 L x 7.0 W x 8.0 H.

For installing fixtures after the siding has been applied to the home. Provides level surface for all exterior accessories. Dimensions 6.75 In. x 6.75 In.. For use on 4-10 siding, Sold as 2-Pack. Made in the USA.

For installing fixtures after the siding has been applied to the home. Provides level surface for all exterior accessories. Dimensions 6.75 In. x 6.75 In.. For use on 4-10 siding. Made in the USA.

Kit includes mounting block with built-in electrical box, NM cable connector, and 4 screws.. Fast and easy to install after siding is up. extured, paintable surface.. Flat Surface Mounting Siding Type 12 Inch Lap Material UV Rated Plastic Capacity 6.8 Cubic Inch Size 4 Inch Diameter X 6.61 Inch Width X 0.5 Inch Depth X 6.61 Inch Height. Mounts light fixtures on all siding types, including T-111, HardiePlank Lap Siding, and flat surfaces. Electrical box dimensions 4 diameter x 12 deep.