Compatible with 2008-2011 Cross Bones FLSTSB,2014-2016 CVO Limited FLHTKSE,2008-2013 Dyna Fat Bob FXDF, 2002-2009 Dyna Low Rider EFI FXDLI,2002-2009 Dyna Low Rider FXDL, 2014-2017 Dyna Low Rider FXDL,2006-2008 Dyna Street Bob EFI FXDBI,2006-2008 Dyna Street Bob FXDB, 2005-2011 Dyna Super Glide Custom EFI FXDCI,2005-2014 Dyna Super Glide Custom FXDC,2013-2015 Dyna Switchback FLD,2002-2008 Dyna Wide Glide EFI FXDWGI,2002-2008 Dyna Wide Glide FXDWG,2005-2011 Dyna Super Glide Custom EFI FXDCI. Replacement for 2005-2014 Dyna Super Glide Custom FXDC,2008-2011 Electra Glide Classic EFI FLHTCI,2011-2013 Electra Glide Classic FireRescue FLHTC,2008-2013 Electra Glide Ultra Classic Shrine SE FLHTCU,2010-2015 Electra Glide Ultra Limited FLHTK,2002-2017 Fatboy FLSTF,2007-2011 Fatboy Peace Office SE FLSTF,2010-2016 Fatboy Lo FLSTFB,2016-2017 Fatboy Lo S FLSTFBS,2014-2017 Forty Eight XL1200X,2003-2017 Heritage Softail Classic FLSTC,2007-2014 Heritage Softail Classic Peace Officer SE FLSTC. It's time to upgrade your harley led tail light, classic black makes your motorcycle tail lamp more dazzling and add new features to the motorcycle in appearance. smooth and double coated rear lamp surface, hard and durable ABS plastic to protect the blinker lights running lights from minor impact effectivly and not faded for long time use. Increased rear visibility, easy to notice by others vehicles on road for safety driving. Easy to install, just need to remove stock tail light, before replace new black tail lamp,please indsert the adaper into to corresponding holes to make sure new tail light works, screw it up. Package come with 1 piece Harley Led Tail Light 1 piece use manual,you are backed by 6-Month warranty since purchase date, feel free to send email first if theres any issue, solution will be offered once details confirmed.

3 In 1 Driving lightsWhen the tail lights are activated,the red breathing mode is scanned four times before switching to a constant red lightLow Bright Red LightTurn signalLeftRight sequential flowing turn signal led lightBrake lightWhen braking,it flickers four times and then switches to a constant red lightHigh Bright Red Light .. Connection guidance Black line - negative pole, white line - running lights, red line - brake lights, yellowgreen line - turn signal. If your motorcycle has dual flashing function, our product also has this effect.. Ultra high brightness equipped with a 60LED chip, the visibility reaches its maximum value day and night, and the working voltage is DC 12v-80v, suitable for motorcyclesATVScooterBikeTruckTrailer and Golf Car.. Good waterproof function Fully sealed design with IP67 waterproof rating, even in rainy weather, it can be used stably.. Professional Service We are committed to providing good customer experience, if you have any questions about our product, please do not hesitate to contact us..

WIDE COMPATIBILITY The motorcycle led license plate light is compatible with models featuring 1 axle holes. The motorcycle led rear light is fit for Harley Sportster Chopper Bobber Honda Yamaha Suzuki Kawasaki.. 200 BRIGHTER SMD LEDsThe motorcycle license plate LED brake light are 200 brighter than halogen lights. The motorcycle led tail light provides more visibility and safety when riding.. 40000 HOURS LIFESPAN The motorcycle license plate tail light is protected against short circuits for safety and reliability. The motorcycle LED rear light housing is made of rustproof aluminum for built to last.. IP67 WATERPROOF The motorcycle LED brake light features a waterproof design to protect the internal wires. This enhanced waterproof can withstand heavy rainstorms and harsh weathers.. 3 LIGHTING MODESThe motorcycle side mount LED rear light provides 3 lighting modes brake light running light license plate light. Also, the motorcycle license plate light with bracket can be mounted left and right side.. WHAT YOU WILL GET The package includes 1 motorcycle LED brake light 1 1 axle hole license plate bracket set 1 year quality support license plate not included..

DURABILITY UPGRADE - Our glossy-coated baseplate replacement, crafted with durable ABS material, adds a touch of premium quality. Stand out on the road with confidence and True Mods' exceptional craftsmanship.. RIDE ON, SCRATCH-FREE - Say goodbye to those pesky scratches Our baseplate replacement has a protective foam pad that keeps your Harley Davidson pristine during and after installation. It is time to ride in style and keep your hog flawless. PERFECT FIT - Effortlessly upgrade your Harley bikes with our baseplate replacement. stainless screws to secure the tail light and circuit board are included, ensuring a seamless install experience and getting you on the road faster with style.. 2 COLOR OPTIONS - Choose from badass Black or shiny Chrome for your Harley baseplate replacement. Get the perfect look that matches your bike's personality.. COMPATIBILITY - Perfect alternative of OEM Part 68296-99A on 2000-2023 Harley Davidson OEM Fenders with PN 68296-99A. DOES NOT Fit 2018-2023 Softail models or 2012-2016 Dyna Switchback FLD..

Compatible with 2008-2011 Cross Bones FLSTSB,2014-2016 CVO Limited FLHTKSE,2008-2013 Dyna Fat Bob FXDF, 2002-2009 Dyna Low Rider EFI FXDLI,2002-2009 Dyna Low Rider FXDL, 2014-2017 Dyna Low Rider FXDL,2006-2008 Dyna Street Bob EFI FXDBI,2006-2008 Dyna Street Bob FXDB, 2005-2011 Dyna Super Glide Custom EFI FXDCI,2005-2014 Dyna Super Glide Custom FXDC,2013-2015 Dyna Switchback FLD,2002-2008 Dyna Wide Glide EFI FXDWGI,2002-2008 Dyna Wide Glide FXDWG,2005-2011 Dyna Super Glide Custom EFI FXDCI. Replacement for 2005-2014 Dyna Super Glide Custom FXDC,2008-2011 Electra Glide Classic EFI FLHTCI,2011-2013 Electra Glide Classic FireRescue FLHTC,2008-2013 Electra Glide Ultra Classic Shrine SE FLHTCU,2010-2015 Electra Glide Ultra Limited FLHTK,2002-2017 Fatboy FLSTF,2007-2011 Fatboy Peace Office SE FLSTF,2010-2016 Fatboy Lo FLSTFB,2016-2017 Fatboy Lo S FLSTFBS,2014-2017 Forty Eight XL1200X,2003-2017 Heritage Softail Classic FLSTC,2007-2014 Heritage Softail Classic Peace Officer SE FLSTC. It's time to upgrade your harley led tail light, deep red makes your motorcycle tail lamp more dazzling and add new features to the motorcycle in appearance. smooth and double coated rear lamp surface, hard and durable ABS plastic to protect the blinker lights running lights from minor impact effectivly and not faded for long time use. Increased rear visibility, easy to notice by others vehicles on road for safety driving. Dyna integrated taillight. Easy to install, just need to remove stock tail light, before replace new red tail lamp,please insert the adapter into to corresponding holes to make sure new tail light works, screw it up. Package come with 1 piece Harley Led Tail Light 1 piece use manual..

Universal Compatibility 8mm mounting bolt, used for most DC 12V motorcycle specially compatible with harley street glide softail road glide sportster, honda gl1800 vt600c vt750c2b, kawasaki en500, suzuki m109r, triumph bonneville thunderbird, yamaha roadstar. Super Bright and Integrated Design Equipped with 4pcs high power SMD LEDs per blinkers, mini size but much brighter than halogen bulbs, bright light output makes you more noticeable when driving to increase safety. Yellow function as turn signals, bright red as brake light and dim red as tail light. IC controlled, no higher flashing. Waterproof Made of high quality glass lens and painted black metal housing, anti-corrosion and anti-scratch. sealed well on the edge, water tight, stay illuminated in extremely hot, cold, rainy or snow days. Best replacement for old dull indicator. Easy Installation Two installation methods, if your original blinker is with 8mm mounting bolts, just remove your stock turn signal and install the new light on where the old one was removed. Or drill an 8mm hole on where you to mount the new turn signals to DIY your motorcycle. Package Including 1 Pair led motorcycle turn signals tail light with brake light rear mini size tail light ..

Wide Compatibility This 12V motorcycle tail light is designed to fit for most universal Street Bikes, Cruisers, Choppers, Bobbers, and Cafe Racers. Compatible with popular brands like Harley, Honda, Kawasaki, BMW, Yamaha, Suzuki, Ducati, Benelli, Aprilia, and more.. 200 Brighter with 90 Ultra-Bright LEDs Equipped with 90 high-intensity LEDs, this motorcycle brake light delivers up to 200 more brightness than standard lights. Enhanced illumination boosts visibility in all conditions.. 40,000 Hour Lifespan Built with durable LED circuit boards and short-circuit protection, this motorcycle LED rear light offers a reliable service life of over 40,000 hours. Its IP67 waterproof rating ensures stable performance in all weather conditions, from heavy rain to dusty trails.. Enhanced Mounting Flexibility We've added 2 extra installation holes, providing a total of 4 mounting points to reduce the need for retrofitting and allows compatibility with a wider range of license plates. While most other brands of motorcycle license plate light offer only 2 mounting holes, often requiring modifications for proper fit.. 5 Lighting Modes 5-Wire Design This LED motorcycle tail light features 5 lighting functions running light, brake light, left turn signal, right turn signal, and license plate light. It comes with 5 dedicated wires for straightforward, hassle-free installation and reliable performance.. Whats in the Box 1 LED motorcycle tail light license plate not included, 2 screws, 2 spacers, 2 nuts, and 1 user manual.Note Some license plate sizes may require minor modifications for proper fit..

Steel housing with powerful red LED tail lights behind a abs lens with steel mesh. An excellent replacement or addition to your Motorcycle. Also fits later model pick-ups and wagons. You can choose right or left to install the light.. Solid state circuit board for 12V systems,3 wires connectionGround Black Tail Blue Brakes Red. This tail light would look great on Custom projects, Cafe Racers, Cruisers, Streetbikes, Retro's etc.. Size light diameter 98mm3.86inch Width,58mm2.28inch Deep. Bracket Installation hole to hole 35mm1.38inch.

Universal Compatibility Direct fit for Honda Grom125 and popular models like 2019 CB650R, 2014-2016 CBR650F, CTX700N variants, and more.. Upgraded LED Brightness High-intensity SMD LED chips ensure superior visibility vs. standard bulbs, enhancing safety with brighter runningbrake lights.. Integrated Multifunction Lighting Combines running light, brake light, and sequential amber turn signals for a sleek, custom look while streamlining your setup.. Weatherproof Built with ABS housing and IP67 waterproof rating for long-lasting performance in all conditions.. Plug-and-Play Installation Simple 5-wire setup color-coded for easy connection. Pre-installation testing recommended for hassle-free setup..

All-in-one Functions This movotor taillights can be used as running light, brake light, turn signal lightturn leftright. White Light used as license plate light The brake light and turn signals light built together. Providing good visibility, it makes your driving much safer. Lay Down Style, which is angled to follow the curve of your rear fender for the streamline look.. Upgraded Design New upgraded batch The back housing is tightly sealed, with waterproof IP67, it could effectively prevent moisture entering. The performance of the tail light will not be affected even if you encounter any inclement weather. Upgraded turn signal plug, directly plug and play, easy to install.. Fitment Fits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSEAll 2002-2010 FXST Models except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCWC1991-2010 Electra Glides except 2005 FLHTCSE, 2009 FLHT Standard.. Durable Materials This new upgraded tail light is made of rugged and durable ABS plastic, which could effectively protect tail light from damage while driving. Equipped with high intensity 60pcs LED chips, brighter than stock tail light. Our tail light is built to last, with sealed housing and waterproof IP67, it could work perfectly in any inclement weather.. Wire for functions Running--White Wire, Brake--Red Wire and Turn Signal Yellow wire-- right turning Blue wire-- left turning Black wire--Negative. Package 1 Piece Low Profile Smoked LED Tail Light. This tail light has 12 months friendly product support..

Compatible with Harley Sportster 883 Sportster 1200 Street Glides Road Glides Electra Glide Road Kings Please refer to the compatible list in description. Unique appearance design, the light source is more concentrated and brighter, ensuring your driving safety. LED smoked tail light integrated with brake light, turn light, parking light and license plate light. The led tail light fit all motorcycles with the same shape of taillight base as ours. Easy to install, perfect and accurate replacement for the original tail light without any changing or modifying Please refer to the installation video before your installation. Package Include 1PCS LED Tail Lights.

FitmentThe Tail Light with Turn Signals compatible with Honda MSXGrom125 2013-2016 2017-2019, 2019 CB650R, 2014-2016 2018 CBR650F, 2013-2015 CTX700N, 2015-2016 CTX700N DCT, 2018 CB650F, etc.. Exceptionally Bright LED LightingMotorcycle brake light with turn signals features high-power LEDs that deliver brightness far superior to traditional halogen bulbs. Ensures safer night riding by making your brake and turn signals highly visible to other drivers, enhancing overall road safety.. IP68 Waterproof, Premium QualityConstructed with premium ABS plastic housing and rated IP68 for waterproof performance, this product withstands extreme weather conditions, heat, and UV exposure. Designed to last up to 50,000 hours, it ensures reliable and durable use in even the most challenging environments.. Modern Style DesignThe motorcycle turn signals illuminate from the center outward, adding a modern touch to your bikes appearance while helping you stand out in traffic and showcase your style.. Easy InstallationThe Motorcycle brake light is easy to install, 5 wiring harness red brake light, blue tail lightdaytime running light, yellow leftright turn signals, black negative. Light test before installing is necessary..

Waterproof Design This motorcycle LED tail brake light is waterproof, ensuring reliable performance in all weather conditions.. Universal Compatibility Compatible with various motorcycle brands like Harley, Honda, Yamaha, Suzuki, and Kawasaki, making it a versatile choice.. Curved License Plate Mount The curved design allows for easy side-mounting on the license plate area for a sleek, integrated look.. Bright LED Illumination Featuring bright LED lights, this tail light ensures excellent visibility and safety on the road.. Easy Installation Comes with a bracket for straightforward installation, no complex wiring required..

COMPATIBILITYThis Aftermarket ATV led Tail Light compatible with Yamaha Bear Tracker Big Bear Bruin Grizzly Wolverine Bruin Viking Rhino ATV models, replace part number 5KM-8472C-10-00, 5KM-84710-01-00.. SUPER BRIGHTDifferent from single halogen bulb, 22pcs LED are embedded on a special chrome panel that reflects and enhances the light. High intensity and outshines traditional incandescent lamps. When you hit the brakes, you'll grab everyone's attention.. HIGH QUALITYThis Grizzly Tail Light made of premium ABS and PC materials, which are anti-scratch, IP67 waterproof and more durable. Unique grid-patterned lens makes light stylish, add custom appearance.. EASY INSTALLATIONUsing the harness connector, plug the 3 wires into the connector and into your ATV. Black--Negative Blue--Tail light Yellow--Brake light. Before plug into connector, ensure that the function corresponding to each wire is the same as the stock one.. PACKAGE INCLUDE1 PCS ATV Motorcycle Brake Taillights for Yamaha. Sold each.

THREE WIRE, DUAL-INTENSITY - Our lights are so much more than just secondary tail lights. Built with a three-foot, three wire cable, and dual-intensity circuitry, these lights function as tail lights and brake lights or turn signals.. SAFETY AND PERSONALITY - Brake lights save lives. But your brake lights can only protect you if they can be seen. Packed with 15 high-intensity LEDs, our 5 strip lights are faster, brighter, and better looking than traditional brake lights.. LEAVE THE STRESS BEHIND - IP68 rated and completely silicone sealed, our lights will continue to perform day in and day out, rain or shine, dirt or asphalt.. CLEAN AND LOW - At only 18 thick and 12 wide, our low-profile, hyper-flexible, strip lighting is designed to conform to the lines of your bike and blend seamlessly with your unique looks.. DIRT, TRACK, OR STREET - Truly flexible in design and application, our red LED strip lights are perfectly suited for any kind of vehicle you can think of. Install them on your bike, your snowmobile, and your truck.

32SMD high brightness 2835 LED chips per lights for maximum illumination. Working Voltage 12V.. Supports four functions Running Tail Light, Bake Light, Left Turn Signal and Right Turn Signal Lights.. All-in-one design. Perfect for Motorcycle Scooter Quad Cruiser Off Road etc. Easy Installation Mount with 3M tape, 5 wires connection.. Made with a durable flexible FPC plastic rust-resistant strip and filled with IP65 watertight silicone ensure it could work well in any weather.. Livtee LED are strictly tested for sale Any issues or questions please feel free to contact us, we are always here to satisfy all of you..

High QualityThis Led tail light is made of high quality ABS PC lens. Waterproofrobustness and durability, and long service life,. Better PerformanceThis product is with the waterproof electronic board, equipped with a stabilization circuit, can suppress sudden overvoltages. 12 to 15 volt operating range.. Low Power ConsumptionLow energy consumption, but high output lumens, while not reducing engine power.. 3 in 1 Fucation DesignThe rear fender tail light can function as running light, brake light, and turn signal light.. About CompatibilityUniversal fits for Most of motorcycle models, Dirt Bike, or any Custom Bikes. It is not specific designed for any motorcycle. Some minor modifications may be needed during installation..

Package Including 1 Dual Color Motorcycle Scooter LED Lamp,ONLY Need 1 Pcs lamp with 3 functions maximum visibility and safety. 3 In 1 - Driving lights Left and Right Turn signal Brake Stop light . Waterproof In Rainy Weather,Totally Glue Seal Design IP67 Waterproof Level Made It Steady Woking Performance In Rainy Days.. Connection Guide Black wire--Negative, Yellow wire--Turn signal Sequential,Green wire--Turn signal Sequential, White wire-- Position light,Red wire --Brake light Size For The Lamp - Length 125mm Width35mm Height21mm Screw Diameter M4.5 Hole Spacing69mm Wire length Around 50cm. Driving lights When the taillights are activated, the red breathing mode is scanned four times before switching to a constant lights Low Beam Red Light Brake light When braking, it flickers four times and switches to a constant red light High Beam Red Light Turn signal Left Right sequential flowing turn signal led lights LeftRight Flowing Amber light.. DC12-80V Working Voltage,Widely Use On Motorcycle,Scooter,Electric Motobike,Moped..

FIRST PLACE - Effectively combining sequential turn signals, hazards, brake lights, and running lights in one unit, this is the first light on the market to break away from the norm and give you exactly what youve been looking for. IMPORTANT To ensure the proper functions, please follow the manual for wiring installation.. BE SEEN AND BE SAFE - Packed with 60 attention-getting LEDs, this light is impossible to ignore. And with a road full of distracted drivers, you need every advantage you can get.. LEAVE THE STRESS BEHIND - IP68 rated and completely silicone sealed, this light will continue to perform day in and day out, rain or shine, dirt or asphalt.. CLEAN AND LOW - At only 18 thick and 78 wide, this low-profile, hyper-flexible, strip light is designed to conform to the lines of your bike and blend seamlessly with your unique looks.. DIRT, TRACK, OR STREET - Truly flexible in design and application, this two-row LED strip light is perfectly suited for any kind of vehicle you can think of. Install them on your bike, your snowmobile, or ATV..

4 PCS Turn Signal LightsComes with 4 PCS Turn Signal Lights, Suitable for Motorcycle Motorbike Scooter Off Road.. Unique Flowing LED Lighting DesignAmber Color and Flowing Mode, Cool Design, Perfit Fit For Turn Signal and Indicators Usage.. Super BrightBuilt-in 315 Side Light Beads, The Brightest Lights on the Market.. High Flexible Rubber DesignCurved Style, Which Can Effectively Prevent Accidental Falls.. Easy to InstallConnection Guide Black Line is Negative , Red Line is Positive Lamps Size 11x2.5cm, Cable Length 25cm, Easy Installation, Directly Mount to the Original Turn Signal Light Place.Noted it maybe need an LED FLASHER avoid error flash very fast..

Bates Style - Make your cafe racer,bobber and chopper standout with this beautiful Bates style rear tail light. Rugged and Waterproof - Made of high-quality steel casing and PC lens, it can also run in rainy and bad weather. Bright Light - The output of the LED lights is pure red light, which is more effective at lighting up the road, and is more noticeable to other vehicles during both the day and night. Easy Installation - Just splice wire into existing wire harness. 3-wire configuration, red wire for brake light, blue wire for running light taillight, black wire for negative. Widen Fitment - Universal fit for most bike,such as Bobber Caf Racer, Dirt Bike, Custom Chopper, Cruiser, Buggy.

SPECIFICATION Light Color Red, Material High Quality Aluminum, High Lumens Output and Long Life Span. INSTALLATION 3 Wire set up, Black wire for ground, Red wire for signal lights, The third wire for driving lights. Easy to install, no any modification required, just plug and play.. Turn Signal Driving Lights Blinker Indicator LightFront and Rear lights. PACKAGE INCLUDED 1 Set Left and Right Turn Signal LED Lights. FITMENT Universal fit for all universal 12V motorcycles motorbikes with 10mm holes fairing.

15 LED BeadsThis 12v rear brake light is composed of 15 LED beads, with high brightness, long service life up to 50000 hours, which is durable and has strong signal.. Safe DrivingAlways bright on running and high bright on stop brake to ensure your driving safety. With low power consumption and energy saving, ideal for your vehicle.. Ultrasonic WeldingUsing ABS material and professional ultrasonic welding technology, it is shockproof, rust-proof and waterproof, no fear of rain, snow and fog.. ApplicationSizeL H W Approx. 116 33 35mm4.6 1.3 1.4. Suitable for most motorcycles, ATVs and scooters. Wonderful light accompanies you along the way.. Easy To InstallNo need to change lines, you can directly replace the old or worn one, this brake taillight is light and strong, simple and convenient to install..

Color 23 LED red as running brake light, 5 white LED as license plate lightLens Color Smoke. Aprox.Dimensioins 5 x 1-12 x 1-14. Wire GreenGround, YellowRunning, BrownBrake. Package Included1 x 28 LED Universal Tail Light. FitmentFit for all kinds of cruiser bikes,ATV.

High-Intensity LED Brake Sensing AdvancementIlluminate your surroundings with our rear bike light's high lumen COB LED. featuring smart sensor technology that activates a brake light when you slow down. The light emits a high-intensity flash for 5 seconds, alerting riders behind you for enhanced safety. Dynamic Modes Easy Install Choose from 4 dynamic light modes 1 Normal Flash, 2 Breathing Flash, 3 Fast Flash, 4 Steady On. Tailored for diverse riding conditions day and night. Effortlessly install with metal under-seat or rubber band seat post mounts. Fits road, mountain, cruiser, scooter. Smart Auto OnOff Battery Efficiency- Experience intelligent functionality with our bike rear light. Equipped with Motion and Light Sensors, it automatically turns off after 30 seconds of inactivity. Once movement is detected or your bike is in motion, the light reignites auto onoff applies to modes 1 and 2. For continuous daytime visibility, opt for modes 3 or 4 to bypass the Light Sensor Brake sensing active in all modes. Extended Battery Life Intuitive Power DisplayStay powered during your rides with the 400mAh Li-ion battery. On a full charge, enjoy up to 50 hours of usage. The built-in power indicator features four blue breathing lights, each indicating 25 battery capacity, ensuring you know when to recharge. Durable Build All-Weather Ready Crafted from premium aluminum alloy, our bicycle brake light boasts an elegant metallic finish. Designed to withstand diverse weather conditions with an IPX6 Waterproof rating, making it suitable for any ride.

Widely Application - This tail light fit for 2007-2010 Sportster XL883L LowEFI, 2000-2006 Sportster XL883C Custom, 2005-2006 Sportster XL883L Low, 2011-2015 Sportster XL883L Super low, 2000-2006 Sportster XL883C Custom, 1998-2008 Road Glides, 1991-1996 Tour Glides, 1999-2006 FLTR-I etc. More for detailed applicable models, please refer to the vehicle fitment list or products description. HIGH QUALITY COMPONENTS - MZS tail light use high quality ABS injection molded housing and UV protected lens element, will have waterproof, dustproof, durable and high toughness.. UPGRADE DESIGN - The integrated LED Tail Light with Turn Signals brighter than stock tail light with smoked lens. Lay Down Style, low profile design tail light, which is angled to follow the curve of your stock fender for the customized look. Sealed better with gasket prevent water to infiltrate, made lifespan more longer.. INTEGRATED FUNCTIONALITY - This tail light can be used as running light, brake light, turn signal lightturn leftright, Dual mode redyellow LEDs, is used to illuminate the license plate, as well as as a light sign behind, warning the car behind, the brake in order to maintain a certain distance. Providing good visibility, it makes your driving much safer.. INSTALLATION NOTE - Original tail lights have 7 wires inside and LED only have 5 wires, if connected the wrong one to make the light not light. Black Wire Negative, White Wire Driving Light, Red Wire - Brake Light, Yellow Wire Right Turning, Blue Wire Left Turning. If you install have any problem, please contact us, we will help you..

FitmentThe motorcycle smoked led tail lights designed for harley touring, softail, dyna, sportster, trike and police models, etc, including 2018-2021 FLHC Heritage Classic 107, 2018-2023 FLHCS Heritage Classic 114, 1999-2022 FLHR Road King, 2007-2020 FLHRC Road King Classic, 1999-2006 FLHRCI Road King Classic,2022-2023 FLHFB, 2007-2023 FLHPFLHPE road king police,2002-2006 FLHPEI FLHPI road king police,1999-2010 XL1200C Sportster 1200 Custom, etc. Please refer to description for more fitment.. Smoked LED Tail LightFunction as brake light, tail light and license plate light, high intensity red light for brake light, low intensity red light for tail light, white light for license plate light, license plate light is on while tail light is on Made of high quality ABS plastic material, no faded with long time usage, waterproof, well-sealed at the edge of tail light, keep light on in heavy rainy days or after car wash.. Super BrightnessUpgrade design, built in high power LED bulbs, much brighter lighting output than halogen bulbs, maximize your rear visibility while ridding, make driving safer. Smoked lens and low profile design add new features to your motorcycle without weakening the tail light, make your motorcycle look more stylish.. Easy to InstallEasy to install, plug and play, no modification required, including adapter plug make your turn signal installation a breeze Just remove your stock light, and then insert the adapter into corresponding holes to make sure new taillights works. Easy wiring, black wire for ground, blue wire for tail light and license plate light, red wire for brake light.. Package and Warranty1pcs taillight assembly. You are backed by 90-day warranty.Please feel free to contact us if you have any questions.

CompatibilityThe led taillights fit all motorcycles with the same shape of our taillights base. Featured compatible with Herley 883 sportster, sportster,Electra Glide, Road King, Touring, Road Glide Customer. For more suitable models please refer to amazon confirmed fit.. ALL-IN-ONE FunctionsLay down design, it can be used as taillights, brake lights, license plate light and turn signals. High intensity red light for brake light, red light for tail light, amber light for turn signals.. Easy InstallationPlug and play, easy to install. Black wire -- Negative White Wire - running light Red Wire - brake light Yellow Wire - turn right Blue Wire - turn left.. 3X Brighter Than Stock LightBuilt in high power led chips for illumination, maximize lighting output and improve your rear end visibility to other vehicles, make your driving much safer.. What You Will GetIncluding 1x Smoked Led tail light with turn signals. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions. Solutions will be offered once detail is confirmed..

Voltage DC 12VWattage 40W 1WLEDMaterial LED Metal License Plate Bracket PC Lens.. Fits Most Motorcycle, Street Bike, Cruiser, Chopper such as Harley Honda Kawasaki BMW Yamaha Suzuki Ducati Benelli Aprilia may need tiny modification for some models. Can be used as a running brake lamp,turn signal light and tail light. Super bright high power bulb provides maximum visibility safety.. 5 wires connection system.Black for Negative, Red for Brake Light, Yellow for Running Light, Blue for Turn-Left Signal Light, Orange for Turn-Left Signal Light. Package includes 1X Motorcycle Integrated Tail Light with License Plate Bracket. Complete with license plate bracket, black powder coat over metal housing..

24pcs SMD LED---- This motorcycle tail brake light consists of 24pcs high power SMD LEDs each lamp, so as to provide high brightness to ensure maximum visibility and security. 35000K color temperature and about 300-500Meters 984-1640ft reflection distance make your motorcycle look more luxury and conspicuous. Multi Function Rectangle Reflector---- This motorcycle reflectors can be used as tail brake light and also with turn signal function. Easy to install and respond with no delay. Black wire for negative pole. Blue for positive pole with weak light. Red for positive pole with strong light. Durable in Use---- The LED rear turn signal light is made of premium plastic, it is waterproof and weatherproof, so you can rest assure the normal light in fog days or rainy days. Professional Manufacturing---- The rated voltage of this motorcycle tail brake light is 12V, working voltage is 12-15V. It has a low power consumption with long service life, and it is guaranteed to be of high quality. Wide Application---- This LED tail light universal fit for most of motorcycles, scooters, ATVs, Moped, Bicycles, tricycles, etc. The reflector light size is about 89 35 9.5mm 3.5 1.37 0.37inch.

CompatibilityDesigned to fit Honda CBR600RR 2003 2004 2005 2006 Honda CBR1000RR 2004 2005 2006 2007. It can be used as tail light, brake light and turn signals. Popular smoked lens cover add new features to your motorcycle, enhance appearance of your motorcycle.. 2X Brighter Than Halogen BulbsGetting tired of dim or old tail light and worrying of safety while riding at night. Its time to get this tail light. Built in high power led bulbs for output, 2X brighter than factory light, maximize your rear end visibility, greatly increased your safety while riding in rainy days or at night day time. Smooth and transparent surface, which maintain clear visibility without weakening the LED light. An ideal replacement for a old or defective bulbs.. 15 Times Longer Lifespan Than Factory LightUp to 30000 hours lifetime, 15 times longer lifespan than factory tag light Built in led chips, emitting a mere 10 of their energy in heat, making them much more energy efficient and cool to the touch, saving money on the amount of replacements that need to be purchased and saving costs on power consumption.. Easy Installation AS 1, 2, 3Easy to install, no modifications needed or required. Hardness connector is attached to the end of wire for easier install. Black wire-- Negative White wire-- Tail Light Red Wire-- Brake Light Yellow wire-- Right turn signal light Blue wire-- Left turn signal light.. Buy with ConfidenceYou will get 1X tail light. You are backed by 6-Month warranty since order purchase date. Please feel free to contact us BEFORE OR AFTER SALE if you have any questions. Solutions will be offered once detail is confirmed..

Wide Compatibility Our tail light fits a wide range of Harley models, including Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings,etc. For more models, please refer to description and amazonconfirmedfit.. ALL-IN-ONE Our taillights can be used as running lights, brake lights and turn signals leftright turn. White light can also be used as license plate lights, built in high power SMD chips, improve your rear visibility, make your driving safer.. Durability and Stylish Look Smooth, good light transmission, our taillights made with high strength LED chips and unique smoke lens, waterproof, dust proof, durable and high toughness, this taillight gives your motorcycle a smooth appearance. Low profile design, the layout style is angled to follow the curvy streamlined look of your rear fender.. Easy installation Our taillights come with an upgraded turn signal plug for easy installation. Easy wirin Running--White Wire, Brake--Red Wire and Turn Signal Yellow wire-- right turning Blue wire-- left turning Black wire--Negative.. Packing list 3-Month Warranty, come with 1 piece smoked LED taillight 1 piece washerthe washer to prevent water penetration.All LED taillights are tested before shipping, and all smoke lens caps are carefully inspected before shipping, but may be damaged during shipping. If you have any questions, please contact the seller and we will do our best to deal with it for you as soon as possible. Please check the description for compatibility before ordering..

High quality waterproof DC 12V 15LEDs 3528 chipset Red LED Tail Light ,Stop Light , License plate light Please contact us if you have received the wrong item or have any other questions.. Suitable for most of motorcycles and SUV, motorcycles, bikes, ATV, dirt bike, scooter,golf cart etc.. Waterproof grade IP67,Improve driving safety and visibility.Waterproof black plastic shell and it is extreme durable and can use for a long time.. Integrated light, can be used as running light, brake stop light, rear tail light, license plate light. Easy To Install.Mount almost anywhere with Double 3M tape..

Perfect DesignSuper bright wide angle provide maximum visibility safety. Brings you more safety, visible by all traffic. Curved design perfect fit for the chopped rear fender edge. Classic smoked shell makes your motorcycle tail lamp more dazzling and add new features to the motorcycle in appearance.. Super Bright and 3 in 1 fucationBuilt in 15 high power LED lights, brighter than incandescent bulbs, super bright light output makes you more visible when driving to increase safety, the rear fender edge light can function as tail light, brake light, and turn signal light.. IP67 WaterproofMade of high-quality ABS plastic, the edge is well-sealed and water tight, effectively keeping water out of the housing and keeping it illuminated on rainy days.. Easy InstallationPlug and play. Red wire for brake light, yellow wire for running light taillight, white wire for left turn signals, blue wire for right turn signals,and black wire for negative in a 5-wire configuration.. About CompatibilityFor Harley 2004-2014 Sportster 883, Sportster 1200 For 2014 Iron 883 For 2010-2014 Forty Eight For 2013-2014 Seventy Two..

Fitment Compatible with Honda CBR600RR 2003 2004 2005 2006, Honda CBR1000RR 2004-2007. Super Bright and 3 in 1 Design built in high power SMD leds, brighter than incandescent bulb, super bright light output makes you more noticeable when driving to increase safety, function as running light, brake light and turn signal light. Waterproof Made of high quality ABS plastic, well-sealed on the edge, water tight, effectively keep water out of housing, stay illuminated in rainy days. Best replacement for old dull taillight. Easy Installation plug and play, 5-wire configuration, red wire for brake light, white wire for running light, blue wire for left turn signals, yellow wire for right turn signals, and black wire for negative. Package Including 1 Pc smoked led brake tail light integrated turn signals..

High Brightness This LED rear tail brake light uses high-quality LED bulbs, providing concentrated light without flickering. It maintains clear visibility at night and stable light output in extreme weather conditions such as rain, snow, and fog.. Functionality This LED rear tail brake light features different brightness levels based on driving conditionshigh-brightness red light when braking and medium-brightness red light while drivingproviding efficient warning functionality to clearly communicate your driving status to vehicles behind.. High Quality Constructed from high-quality ABS plastic and utilizing advanced ultrasonic welding technology, this LED rear tail brake light boasts a shock-resistant and waterproof housing to prevent moisture ingress and bulb short-circuiting. It is resistant to aging and wear.. Installation This LED rear tail brake light can directly replace old or worn-out tail lights. Simply remove the old one, connect the wires correctly, and tighten the screws with a screwdriver. No need to replace the wiring or use complex toolsthe upgrade is easy to complete.. Package You will get 1 x LED rear tail brake light, featuring a compact and efficient design, lightweight and durable, tested multiple times, plug-and-play, an essential accessory for enhancing driving safety in adverse weather conditions..

LED Type 3528 3014 SMD Led Chipsets Light Color Red Yellow. Lumens 280LM Input Power 12V 0.13A Operating Voltage DC 12V. Waterproof Rate IP68 SizeApprox 202.5mm 14mm7.97inch 0.53inch Length of WireApprox 56CM22inch NOTE The wires are a little small, please be careful to connect them, thanks for your patience. Easy installation--3M glue makes the light strip stuck directly on the Motorcycle. Multi-Function Brake Light, Running Light and Turn Signal Light Wires Connection--Black wire for negative, Red wire for red lightBrake Light, White wire for red lightRunning Light, Green wire for Yellow lightLeft Signal, Yellow wire for Yellow lightRight Signal.

CompatibilityThe turn signals mounting hole is 10 mm, has a wide compatibility, compatible with Harley, Kawasaki, Honda, Sportster, Suzuki, Yamaha, etc. Please refer to description and amazonconfirmedfit. Front Rear LED Turn SignalsFeatured with brake lights, turn signals, running lights. Rear lights Outer high intensity red lights halo ring for brake lights, outer low intensity red lights halo ring for running lights, center amber lights for turn signals. Front lights Outer white halo ring for running light, Amber lights for turn signals. Upgrade design, built in high power LED bulbs, brighter than halogen lamps, ensuring safety on the road. DurabilityThe metal bracket is processed with a black anodized finish, and is closely connected to the lamp housing, waterproof, durable. Easy InstallationFront lights White wire--Running lights Yellow wire--Turn signals Black wire--Negative. Rear lights Yellow wire--Turn signals White wire--Running lights Red wire--Brake lights Black wire--Negative. Easy to install, easy to wiring. Package and Warranty3 months warranty. 1 Pair of front LED turn signals 1 Pair of rear LED turn signals. All led turn signals are tested before shipping, but may be damaged during shipping. If you have any questions, please contact the seller, we will try our best for you as soon as possible. Please check the compatibility of the description before ordering.

CompatibilityThe bullet rear led turn signal light bar fit all motorcycles with original equipment rear bullet stopturntail light bar. Featured compatible with 2017-later FLHRXS and 2014-later FLHT, FLHX, FLHXS, FLTRX, FLTRXS models, 2010-later Street Glide, and 2010-later Road Glide,etc. For more suitable models please refer to amazon confirmed fit. ALL-IN-ONEALL-IN-ONE design, function as brake light, tail light, turn signals and license plate lights. High intensity red light for brake light, red light for running light, amber light for turn signals, white down-lighting for the license plate. Super Brightness and Durable Made of high quality metal material,no corrosion, anti-scratch, no faded with long-time exposure and can adapt to all kind of extreme weather, processed with black anodized finish, anti-oxidation, anti-corrosion, prolong the life service time Built in high power LED chips, 3x brighter lighting output illuminate than halogen bulbs, greatly improved your visibility, make driving safer. Easy to InstallEasy to install, just remove the stock rear turn signal light bar, then install new replacement Easy wiring, 4-line cable harness red wire for brake light, white wire for running light, yellow wire for turn signals, black wire for ground 2-line cable harness black wire for ground, red wire for license plate light. What You Will Get1set rear turn signal light bar kits. You are backed by 3- Month since from order purchasing, please contact us if you have any questions. Solutions will be offered once detail is confirmed.

Bright high power LED provides maximum visibility and safety Water proof and 100 rust free. Standard Fender Edge LED tail light for Harley Davidson,used for running light,brake stop light,rear tail light, license plate light,turn signal light. Wire Connection Black WireNegative Red WireBraking YellowRunning Blue WireRight Turn Orange WireLeft Turn. Material PC ABS Voltage12V. FitmentCompatible with Harley Davidson 2004-2018 Sportster 883,Sportster 1200 and the details please see below..

Anti-Interference 5 Led Motorcycle Tail LightsUpgraded high-performance motorcycle tail light with turn signals featuring built-in voltage stabilization to prevent flickering when the engine startsensuring reliable visibility and safety. Dual-Function LED Motorcycle Turn Signals Motorcycle Brake LightAmber LEDs for clear sequencial turn signals bright red for brake light. Switch modes via 5-color wiring Black color is for ground, Yellow for right turn signals, Green for left turn signals, Red for brake light, White for position light. When engine started, the red color takes on a breathing pattern that lasts for a few seconds and then changes to solid, brake light starts with high-speed flash and then stays on, perfect choice for integrated motorcycle tail light. Easy Installation1Free WrenchMulti-function motorcycle turn signal with brake light includes a clear wiring diagram and video guide for hassle-free setupsee webpage. Compatible with atv tail light and dirt bike tail lightno extra switches needed, installs in minutes. 1free wrench included. All-in-one lighting solution-everything needed for bike turn signals, eliminating extra part purchases. Ultra-Bright LEDDay night high-visibility safety light equipped with 60SMD 120-lumen high-intensity LED chips, this dirt bike tail light and brake light is 200 brighter than standard models. Features flashing brake lights sequential turn signals for maximum visibility in all conditions. Universal Tail Lights for 12V-80V VehiclesCompatible with motorcycle Harley, Honda, Yamaha, Grom tail light, dirt bike, surron light, truck, ATVUTV, baja light for ebike, bike, trailer, golf cart, scooter and so on. IP67 Waterproof Reliable DesignAdvanced IP67 waterproof rating protects against rain, mud, and extreme temperatures, this dirt bike tail light can ensure stable performance in all weather conditions.

Materiel ABS Housing aluminum stem.. UsageUsed for running light,brake stop light,rear tail light, license plate light,turn signal light. Design perfect match to the chopped rear. High QualitySuper bright with high visibility safety lights, big difference between Low and High brightness. FitmentUniversally fits for most motorcycle, street bike, standard bike, naked bike, dirt bike ATVs, off-road vehicles, Custom Chopper, Cruiser, Dirt Bike, Buggy, Cafe racer..

CompatibilityThe motorcycle led tail lights compatible with 2014-later XL883N, XL1200NS, XL1200V, XL1200X, XL1200XS and models equipped with Chopped Rear Fender Kit PN 60236-XX and side-mount license plate. Will not fit models with center-mount license plates.. Durable and StylishMade of high quality ABS material, anti-scratch, no faded with long time usage Smoked lens and low-profile lamp is contoured to hug the curve of the chopped rear fender adding new features to your motorcycle, make you stand out from the crowds.. Easy to InstallEasy to install, easy wiring, black wire for negative,blue wire for running light, red wire for brake light, yellow wire for turn right, green wire for turn left.. Super Brightness Built in high power SMD LEDs, much brighter lighting output than incandescent bulb, super bright light output makes you more noticeable when driving to increase safety.. Package and Warranty1set rear chopped fender tail light kits. You are backed by 90-day warranty.Please feel free to contact us if you have any questions..

Wide Compatibility Custom Motorcycle Style Designed to fit for ZX25R, ZX4R, ZX4RR, Ninja 250, Ninja 400, Z400, Z250, Z1000, Z1000R, ZX6R, ZX10R, ZX10RR and more. Upgrade your motorcycle with customizable RGB lighting effects to match your riding style and bike aesthetics.. IP67 Waterproof Rugged Durability Design Constructed from premium ABS and PP materials for high impact resistance and long-lasting durability. IP67 waterproof and dustproof rating ensures stable performance in rain, fog, snow, and harsh road conditions.. Ultra-Bright SMD LED for Enhanced Visibility Equipped with high-performance SMD LED chips, delivering significantly brighter and more focused illumination than stock tail lights. Improves night visibility and enhances riding safety while maintaining low power consumption.. Multiple Lighting Modes Control color, brightness, speed, and dynamic effects directly via smartphone APP. Includes multiple modes such as solid color, strobe, fade, breathing, and music sync mode that reacts to sound for a more immersive riding experience.. Turn Signal Plug Play Installation Integrated running light, brake light, and turn signal functions with high-transparency lens for maximum visibility. Simple plug-and-play wiring black wire negative, red wire brake, blue wire DRL, white wire turn signal. Quick installation with no complex modifications required..

1 Pair Great Product to Add-on Turn Signal and Brake Light . 17 LED Integrated LED Light Strip 8 Yellow Turn Signals, 9 Brake and Tail Light.. Waterproof, Dustproof, Shock-resistant,Low Consumption. Energy-saving. Long Lifespan. Super Bright, High Performance LED. Superior Illumination Stability.. Universal fit for most motorcycles ATVs Mopeds Scooters Snowmobiles with DC 12V, also fit for cars SUV vans trucks with DC 12V.. Easy to install tape.With our strict quality control system, we test each item and 100 ensure in good condition before we ship.. Great product to Add-on brake light, running light and turn signal.Consist of 17pcs LEDs each light strip, super bright and high performance..

Material Soft rubber strip with 3528 SMD LED Fitting Position License Plate Light. Led light color Red for brake and stop, Amber for turn signal. Size 20.51.30.8 cm 80.50.3 Power Cable Length Approx 60cm. Voltage DC 12V Waterproof Rate IP 65 Easy Installation Mount with 3M tape, 5 wires connection. Perfect turn Signal Brake light and Running tail Light all-in-one for motorcycle, Car, Trailer. Lots of Common uses.

Motorcycle Tail Light Material ABS Housing PC Lens Lens Color Smoked black Light Color Red. Working Vottage DC 12V. Wattage 1.44W8 LED 0.18WLED Size As the picture picture shown.. Recommended Reasons Multifunctional motorcycle lights, Integrated light. LED lamp glows red when the ignition is on, and intensifies when the brakes are applied low consumption LED lights. Curved design provides perfect match to the chopped rear fender, beautiful and practical.. About Fitments For 2004-2014 883 And 1200 For 2014 Iron 883 For 2010-2014 Forty Eight For 2013-2014 Seventy Two.. Easy Installation Easy To Install, 3 Wires Connecting,Green - Tail lightRunning Light , Brown - Ground , Yellow - Brake Light. High Resistant to Vibration Waterproof.. NATGIC Warranty Service NATGIC Products are strictly tested for sale We offer One Year warranty on items damaged during delivery or have a confirmed manufacturer defect. If you have any problems about our product, please feel free to contact us..

Color 23 LED red as running brake light, 5 white LED as license plate light. Lens Color Smoke, Wire GreenGround, YellowRunning, BrownBrake. Aprox.Dimensioins 5 x 1-12 x 1-14 12.5cm X 3.7cm X 3cm. Package Included1 x 28 LED Universal Tail Light. FitmentFit for all kinds of cruiser bikes..

Rear Fender Brake Stop Tail LightHigh quality ABS plastic with 22 LED bulbs inside, designed with Double-sided adhesive for easier installation.. Safe DrivingSuper bright wide angle provide maximum visibility safety. Brings you more safety, Visible By All Traffic. Curved design provides perfect match to the chopped rear fender.. Perfect DesignLight assembly fits neatly under the rear edge of the rear fender Dual-function design.Better illuminate on the road, it also makes the bike more visible to other motorists and pedestrians.. Lens Color LenRed Housing Color Black Light Color RedSmoke. Connection 3 Wires Yellow Line Brake Light Red Line Tail Light Black Line Ground Line.

Universal FitmentMotorcycle brake lights tail light fit for ATVs, Dirt Bike, Custom Chopper, Cruiser, Buggy,Cafe racer,Harley Chopper,Bobber,Scrambler ETC.. Shell Material Motorcycle taillights tail lights is made from Steel Housing Smoked Plastic Lens. Wire Connection Black for groundRed for Brake lightBlue for Tail light. The motorcycle brake lights word as stop lights and Running Lights, Brake lights and stop light, Rear Tail light.. Package included 1x PCS motorcycle tail Light brake lights.

MULTI-FUNCTION Used for motorcycle Running light,Brake stop light,License Plate Light. EASY TO INSTALL Use 3 wires. Installation method Black Ground,Yellow Running light, Red Brake light. RAINPROOF FUNCTION Made of high quality Aluminium Alloy, with high density, durability, light weight and waterproof. BRIGHT AND CLEAR Super bright provide maximum visibility safety. Brings you more safety, Visible By rear vehicles. DURABLE AND LONGEVITY Long lift span LED lights, output high lumens.

FitmentFit For Harley Touring Models 2008-2013.Easily attach to the OEM hard saddlebags.Please check the size of your saddlebag before you buy. FunctionRunning lightBrake LightTurn SignalStrobe LightFlow Effect .Function as running light, turn signal,brake light.Different state of riding presents different color as picture shown. Runningbrake light color red, turn signalstrobe light color amber turn signal is sequential amber light. When turning left or right, lights will become flowing.. MaterialMade of ABS plactisc. Easy InstallationPlug and play Please purchase the corresponding items according to the corresponding years and connectors.. Note Please ensure wiring connections are securely fastened during installation .. Package Included 1 pair of saddlebag Lights wiring harness.

Rechargeable Bike Tail Light The tail light is built in 330 mAh rechargeable lithium battery. It comes with a charging cable that charges from your computer, power bank or any device with a USB port.. Four Light Mode Options The rear light feature an one-touch switch with four different lighting modes depending on your preference. Include full brightness, half brightness, fast flashing and slow flashing. Easy Installation With a convenient one-touch dismount button, you just need to slide the light on off the mount without removing the whole mounting bracket. The silicone mount strap for Taillight is designed with four openings that tightly fit around most size handlebars and seat posts. Note If the bracket is damaged, you can tell us for replacement.. Advanced Design With simple structure and lightweight, our bicycle lights are easy to carry. Rated IPX4 waterproof. Get Riding Safety The tail light emits an eye-catching wide-angle beam that can be seen from blocks away, need not worry about being knocked over by others.

Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions. Low power and high brightness. 5.5W per 1157 led red bulb. Only 14 energy consumption of original 1157 red bulb but several times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time. Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360 high luminous efficiency with full amber light, easier to be noticed and safer to drive. Small size comparable to OEM bulbs. Non-polarity, applied to US standard and CK sockets. Fits BAY15D 1016 1034 1157 1157R 1178R 1196 2057 2057R 2357 2357R 2397 3496 7528 94, etc. Amazon filter system may not be 100 accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help. Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 2357 red bulbs.

Wide Application. Benlari motorcycle LED turn signals with a 8mm10mm mounting hole are fit for most bike models, including fit for Harley Davidson, Softail, Honda Yamaha Suzuki Kawasaki Cruiser Off-Road, Street Bike Cafe Race, and other motorcycles. Safety Circuit Design. The Benlari bullet turn signals feature 48 built-in LED chips and a safety circuit design for overload protection. Upgraded Exterior Design. Improve the design of the grille lampshade, increase the luminous area, reduce the obstruction of light emission, and achieve better luminous effect. Two Matching Methods. The lamp body is made of M8 bolts, and we also provide M10 parts. You can install the corresponding specification bolts according to your own needs. Special Water-Resistant Design. Equipped with a sealing ring for the lamp cover, it is not easy for water to enter and has a waterproof rating of IP65, which is water-resistant and dust-resistant. You need to Know ? Some models may flicker too quickly and require install a load equalizer. Please pay attention to the model and year before purchasing.

High Intensity LED's, 12 Volt Systems E11 E-Mark Certified. Use as running light and brake light. Smaller and lighter than stock LED tail lights. Easy Installation. Made In Taiwan.

Fit for Harley Touring Models 2014-2023, Plug and Play Installation, Easily Attach Sticky Part to OEM Hard Saddlebags.. Note When using left side of the turn signal, please do not directly switch to the right side, turn off the left side firstly, and then turn on the right sides, otherwise the turn signal only lights half way does not go to end or all the way.. Aftermarket Hard Saddlebag Light,Fuctions as Running Brake Light, Turn Signal and Strobe Light. Lens Cover Smoke RunningBrake Light Color Red Turn signalStrobe Light Color Amber Turn signal is sequential amber light. Package Includes 1 Set of Saddlebag Lights ..

Set of 2 Bulbs 54SMD 3014 3SMD 3030 high brightness chips per bulb, Working Voltage 9v-30v fit 12V, 24V vehicles.. Fits 1157 BAY15D 1016 1034 1157 1157A 2057 2057A 2357 2357A 2357NA 2397 3496 7528 p215w etc. Easy installation, plug and play.. Application Brake Lights, Tail Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash.. Advantage Exclusive design, more than 300 brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span Low Power Consumption.. Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you. New design launched in 2019, US Patent number US-D908272-S.

Multi-Function Lighting Motorcycle turn signals offers turn signal and brake light functionality, combining multiple features in one compact unit. Weather-Resistant No fear of rain and bad weather, ensuring the product can work stably in various environments. Compact Sleek Design The mini size led turn signals motorcycle and streamlined design complement any motorcycle style, offering a modern and minimalistic look. Easy Installation Plug-and-play wiring makes installation quick and easy to install, even for beginners. Includes all necessary mounting hardware. Vehicle Specific This led turn signals motorcycle is compatible with Dyna Cruiser Low Rider Low Rider ST Softail Heritage V-Star Rebel Shadow, etc.

FITMENTThe Tail Light with Turn Signals compatible with MSX125SF,GROM125,CB650F CBR650FCTX700NYG125.. ALL IN ONEThe Motorcycle Integrated LED Tail Light has brake light, turn signals and DRL running light. Flowing turn signals and brighter brake light command the attention of following vehicles and greatly improving riding safety.. IP67 WATERPROOF The Tail Light Brake with Blinkers is made of high quality materials, IP67 waterproof and LED enable the light to work under any harsh environment.. LAMBORGHINI STYLISHFeaturing an array of fast acting high-intensity LED lamps arranged in Lamborghini-style shape, adding a stylish touch, even when the bike is parked.. EASY INSTALLMotorcycle Brake Light With Turn Signals features an easy plugin connection to the Original Equipment wiring harness. Black--Negative Red--Brake Light Blue--Running light 2 Yellow weirs for Turn Signals..

LED tail light with turn signal for Harley Davidson.. Super bright wide angle provide maximum visibility safety. Brings you more safety, Visible By All Traffic. Curved design provides perfect match to the chopped rear fender.. 5 Wire Connection Red Brake Light Black-Ground White Blue-Turn signal lightYellow-Running Light.. Low consumption LED lights with 80,000 hour life expectancy.. Fitment For Harley Davidson 2004-2014 Sportster 883, Sportster 1200 2014 Iron 8832010-2014 Forty Eight 2013-2014 Seventy Two.

Wide Fitment Our universal LED turn signals with a universal 10mm bolt fit a wide range of 12V motorcycles, compatible with Honda, Kawasaki Yamaha Harley Davidson Suzuki Triumph Bobber Chopper Sportster and more. No complex modifications needed for a sleek, custom look. Premium Durable Construction The motorcycle blinkers are crafted with a premium chrome-plated shell and a high-impact lens, these blinkers resist corrosion and fading. Their sturdy, shockproof build, combined with a military-grade IP67 waterproof rating, ensures they withstand harsh conditions like rain, fog, heat or cold, all while adding a cool retro vibe. Ultra Brightness Our upgrade larger SMD LED beads are significantly brighter than traditional turn signal bulbs, ensuring your signals are clearly visible even in bright daylight for enhanced riding safety. With an exceptionally long lifespan, you can enjoy years of reliable service without the need for a bulb change. Package Contents 2 x Bullet Shaped LED turn signal lights. These motorcycle lights features 3-wire connection Black Wire-NegativeWhite Wire-Running LightYellow Wire-Turn Signal. Your Satisfaction,Our Promise Shop with total peace of mind Every GAMAZING motorcycle turn signal comes with 3-year warranty. If you encounter any issues or have questions, our dedicated support team is on standby, Were committed to ensuring your complete satisfactionbecause your trust is our top priority.

Dual Functionality Design This Universal Motorcycle Tail Brake Light not only functions as a standard tail brake light but also incorporates a turn signal feature. This dual functionality enhances road safety by ensuring that your intentions are communicated clearly to other drivers, boosting your visibility and security on the road. High Brightness LED Array Equipped with 24 high-power SMD LEDs, this tail brake light guarantees exceptional brightness for maximum visibility. This enhanced illumination ensures that your presence is easily seen, even in low-light conditions, providing extra security during evening rides or in overcast weather. Weatherproof and Durable Constructed from premium plastic, this brake light is both water proof and weatherproof. This means you can confidently ride in any weather conditions, whether it's foggy or rainy, knowing that your tail light will remain operational and effective, ensuring continued safety and visibility. Simple and Hassle-less Installation Installation is quick and straightforward, allowing you to set up this light without complicated procedures. The responsive design ensures immediate activation without any delay, letting you get back on your bike faster. However, for optimal results, professional installation is always recommended to guarantee proper functionality. Low Power Consumption This motorcycle tail brake light features low power consumption but maintains a long service life, assuring you of efficiency and durability. You wont have to worry about it draining your battery, making it an eco-friendly choice without compromising on performance or safety on every ride.

Small but BrightEquipped with 4pcs high power SMD LEDs per light, mini size but much brighter than halogen bulbs, makes it more noticeable when driving to increase safety, also enhances the look of your motorcycle to more modern, stylish, and functional. Excellent QualityMade of matt black painting aluminum alloy shell and high-quality glass lens, not easy to corrosion or scratch, fully sealed on the edge, with good water resistance, ideal for outdoor use. Easy InstallationIf your original blinker has 8mm mounting bolts, just remove the original one and then replace the new light if no suitable hols, please drill an 8mm hole where you to mount the new turn signals to DIY your motorcycle. Wide CompatibilityUniversal fit for 12V DC motorcycles, motorbikes scooter Scooter Quad Cruiser Off Road Street Bike Cafe Race and other motorcycles with 8mm mounting bolt. TipsMost models have LED compatible turn signal relay, but for a few special models old models need Load Resistor to help the signal flash.

Compatibility Compatible with Harley 2004-2013 XL883N, XL1200N, XL1200X, XL1200V and models equipped with chopped rear fender kit PN 60236-09, 60236-10 2014-later XL883N, XL1200V, XL1200X, XL1200XS, XL1200NS and models equipped with chopped rear fender kit PN 60236-XX and side-mount license plate. NOTE Will not fit models with center-mount license plates. Integrated Brake Turn Signal Lights Super bright with 3 in 1 design, the chopped rear fender edge light can function as tail light, brake light and turn signal light.. Upgrade LED Illumination Built in high power SMD leds, brighter than incandescent bulb, super bright light output makes you more noticeable when driving to increase safety.. Easy Installation Just splice wire into existing wire harness. 5-wire configuration, black - negative, blue - running light taillight, yellow - turn signal right, green - turn signal left, red - brake light.. Package Including 1 PC smoked led fender edge brake tail light integrated turn signals..

Light Reflector, Dual Functionality Stay visible in any condition. Our bike lights combine ultra-bright illumination with innovative wide-angle prismatic reflectors built into both front and rear lights. Even when turned off, the reflector panels provide powerful warnings to cars and pedestrians, maximizing your safety day and night.. 14 Lighting Modes, Switch Freely The bike headlight has 8 modes including spotlightfloodlightstrobe light and the tail light has 6 modes including constant onstrobeslow flash . With simple one-click, double-click, or long press, you can instantly switch between brightness levels and flash patternsIt will remember the previous settings when restarted. Perfect for most city streets, mountain trails, or foggy nights.Please refer to the user manual for detailed use.. Dual Type-C Charging Long Battery Life Charge both bike lights front and back at the same time with the included dual Type-C cableno more waiting. The bicycle headlight charges fully in just 2 hours, and the tail light in only 1 hour. Enjoy 3-16 hours of illumination from the headlight and 5-26 hours from the tail light on a single charge. A smart low battery indicator flashes green below 20, so youre always prepared for your next adventure.. Super Portable Ultra Durable Engineered for performance and portability, each bike light is ultra-slim and feather-light the bike front light weighs 27g, rear light 24g, making them easy to carry. With IP65 waterproofing and 3-meter drop resistance, these bike lights built to handle rain, mud, and rough ridesperfect for all your outdoor adventures.. Tool-Free Install Versatile Use Quickly attach and detach your bicycle light without tools, thanks to the flexible silicone straps that fit most handlebar or seat post. These bicycle lights solutions arent just for bikestheyre ideal for backpacks, strollers, or scooters, and perfect for hiking, camping, or evening dog walks.. Battery Retention The battery retention lasts up to 7 months, but for optimal performance, we recommend recharging them if unused for over 3 months..

Voltage DC 12VWattage 40W 1WLEDMaterial LED Metal License Plate Bracket PC Lens. Can be used as a running brake lamp,turn signal light and tail light. Fits Most Motorcycle, Street Bike, Cruiser, Chopper such as Harley Honda Kawasaki BMW Yamaha Suzuki Ducati Benelli Aprilia may need tiny modification for some models. 5 wires connection system.Black for Negative, Red for Brake Light, Yellow for Running Light, Blue for Turn-Left Signal Light, Orange for Turn-Left Signal Light. Package includes 1X Motorcycle Integrated Tail Light with License Plate Bracket.

Motorcycle LED Tail Brake Light with Turn Signals. 12V, 16 LED Double Rear Motorbike Light Unit, Silver body with black lens. Mounting plate fits behind number plate.. Wire Setup Ground black wire Running Light green wire Brake Light red wire left Turn signal Light white wire right Turn signal Light yellow wire.. Universally fits for most motorcycle, street bike, standard bike, naked bike, dirt bike ATVs, off-road vehicles, Custom Chopper, Cruiser, Dirt Bike, Buggy, Cafe racer, ETC.. Can protect any splashing rainy water penetrating into the light ,can use it confidently without causing any issues.. Premium ABS plastic lens and aluminum License Plate bracket LED built to long lasting durability,even over 50,000 hours using lifespan..

Material Black Metal Housing and Plastic Smoke Lens.Bulb Type8 LEDs.. FunctionsRunning Tail Light, Brake Stop Light etc.. High QualitySuper bright with high visibility safety driving Signal lights.. InstallationBlack wire for groundRed wire for brake signal lightsblue wire for driving lights.. FitmentUniversal Compatible With ATVs, Dirt Bike, Custom Chopper, Cruiser, Buggy,.

CompatibilityThe LED motorcycle rear turn signals are universal. Fit for most 12V motorbikes, such as compatible with Harley Sportster Dyna Road King Electra Glide Road Glide Softail, Honda Shadow Grom, Yamaha, Suzuki, Kawasaki Vulcan Ninja and other motorbikes with 10 mm holes fairing.. 3X Brighter Than Factory LightUpgrade design, built-in 16PCS high visible led diode bulbs, providing brighter light output, brighter than halogen, greatly increased your visibility at night, foggy and rainy days or any extreme weather, make your driving safer.. Waterproof and DurableThe motorcycle blinkers made of metal shell with clear lens cover, maintain clear visibility without weakening the light. Sturdy and make it resistant to shockproof, corrosion and waterproof. Bullet style exterior stylish, nice and attractive, add features and enhance your motorcycle appearance.. Easy InstallationBlack--negative Yellow--turn signal Red--brake light White--running light. Bright red for brake light, red for driving lighttaillight, amber for turn signal. Note Your bikes may experience hyper flash or not light at all, it can be corrected by installing a flasher relay or resistors, and the relay is included in the package.. Buy with Confidence1 Pair rear amber red turn signals1 PC motorcycle relay. You are backed by 3-Month warranty since the order purchase date. Please feel free to contact us if you have any questions..

CompatibilityRear brake light universal for 50cc 70cc 90cc 110cc 125cc motorcycles, fits most Chinese motorbikes brands and models, such as compatible with TaoTao, SunL, Buyang, Kazuma, Roketa, ATV, scooter, moped, etc. NOTE Minor modification may be required for some models. Unique DesignATV brake light with smooth line, large housing space for better heat emission, reducing damage caused by burning, extending the range of light reflection and increasing light output, make the taillight more brighter than factory light, greatly increased your rear end visibility at night or rainy days, ensure your driving safety and provide longer service time.. Waterproof DurableLED rear tail brake light made of ABS plastic and PC lens cover, protect bulbs from water and dirt damage, anti-scratch, shockproof and waterproof, no faded after long time exposure, no water or moisture inside after underwater testing, long-lasting durability.. Plug and Play3 pin female plug, harness connector is attached to the end of the wire for easy installation, no wire hassle and save your effort. Black - Negative, Red - Brake tail light, Brown - Running light.. Buy with ConfidenceYou will get 1x motorcycle tail lights. You are backed by 6-Month warranty since the order purchase date. Please feel free to contact us if you have any questions..

See fitment guide image for additional Machines this item fits. The Tusk Motorcycle Enduro Lighting Kit is an easy to install lighting kit that doesnt require you to cut into or interfere with your motorcycles wiring.. Kit comes complete with wiring harness, LED mini-stalk front turn signals, LED flush mount rear turn signals, flasher relay, horn, hydraulic brake switch, LED taillightbrake light, dual sport folding mirror, OnOff switch, and control switch.. The kit is intended for motorcycles with existing headlights..