Getting tired of the orangered factory bullet style turn signal light lens Time to get these popular smoked covers to customize the blinkers, the dark tinted caps add new features to the motorcycle in appearance and maintain clear visibility without weakening the halogen or LED light. Compatible with Harley Dyna, Street Glide, Fat Boy, Softail, Road King, Springer, and other models with 2 inches standard new bullet style turn signal lights only, not for aftermarket replacement housing. Smooth and transparent surface, hard and durable ABS plastic protect the blinker lights from minor impact effectivly. Package includes 4 covers only, as shown in the first picture, no other part included easy to install, plug and play. Easy to InstallPlug and PlayNo modification needed,easy to install..

ELIMINATE HYPER FLASH Our Eagle Equalizer eliminates hyper flash when installing LED turn signals on pre-2013 Harleys. It does not produce heat or put a load on the electrical system under use. Only one unit is needed for either 2 or all 4 turn signals.. EASY TO INSTALL Install this equalizer with ease It comes with easy-to-read instructions and a user-friendly design. The Eagle Equalizer has Harley OEM connectors that plug directly into the wiring harness underneath the seat in minutes.. PLUG AND PLAY - Installation typically takes about 5 minutes. Under the seat is the turn signal wire harness. Simply plug the Eagle Equalizer into the harness.. COMPATIBLE You can use this equalizer with a combination of LED and incandescent turn signals.The Eagle Equalizer is a direct plug and play fit on 96 - 10 Softails, 97 - 11 Dynas Except 2009-2011 FXDB, 2010-2011 FXDWG, 99 - 03 Sportsters, 06 - 09 Street Glide, 97 - 09 Road Glide Standard, 97 - 13 Touring Models Except 10-13 Street Glide, 10 - 13 Road Glide Custom, and 10 - 13 Tri-Glide. Does not fit CVO models.. EAGLE LIGHTS LIFETIME WARRANTY - Our products are designed to outlast your bike But should something go wrong, you are covered by a lifetime manufacturer's warranty. The best warranty in the business No hassle returns and no hassle warranty replacement. DOT approved, high lumen output, easy installation all backed by a lifetime warranty. Eagle Lights, the original, the best and the brightest. What are you waiting for.

Super Bright LED Turn Signals--60 LARGER 3030 SMD LEDsThe 1157 LED turn signals are more than 300 brighter than halogen bulb, full auminum housing with upgraded smoke lens for better light output and better heat distribution for longer lifespan and safter driving.. Smoke Lenses--Upgrade Versions Excellent Light Transmission.There are turn signal lenses made of high-quality PC plastic with 3-layers special protective coating for scratch-resistant after 300 wipes.The regular lenses will be scratches after 10 wipes and make the motorcycle look bad.. Light PerformanceCan see them well during daylight.Switchback design lighting.The front blinker available in two color, white ring for running light, amber for turn signals.Rear turn lights are red colors and the outer ring is running light ,full light is brake light.The turn signals allows you to be more noticeable.it have a long life and fit the motorcycle system perfectly.. Light Installation--Handle design,Plug-and-playThe LED turn signals are plug-and-play on models with front and rear bullet style housings.. Compatibility 1The turn signals fits for Harley with 2 bullet style models. For Touring Street Glide,Street Glide Special ,Road Glide ,Road Glide Special,Road King SpecialExcluding CVOLimitedClassicUltra .For Sportster Iron883, iron 1200, SuperLow 72 48,883R 1200T,1200 Low ect.. Compatibility 2for Dyna Wide Glide, Street Bob, Low Rider , Fat Bob ect.For Softail Sport Glide,Slim, Low Rider, Fat Boy, Fat Bob,Fat Boy S,Low rider S ect.. Not fit for 3 14 inchesSome models may be need load resistor decoders or flasher relay to ensure the LED turn signals light up with full power and prevent 1157 LED bulbs from being hyper flashing, warning or any malfunction error code on dashboard.. Package Contains1 Pair of front 1157 LED turn signals.1 Pair of rear LED turn signals.2 Pair of smoke turn light lenses. All LED turn signals will be tested before they are sent out.We are here to assist you and resolve any issues promptly..

WIDE COMPATIBILITYThe 2-inch LED turn signals are compatible with Harley models, including Dyna, Softail, Sportster, Road Glide, Road King, and Street Glide 1986-2024, fitting 2inch bullet-style turn signals.. 500 SUPER BRIGHTERThe 1157 turn signal light, designed fit for Harley models, is equipped with 81 high-intensity SMD LEDsproviding up to 500 brighter illumination compared to standard halogen bulbs and conventional 24-LED lights. This enhanced brightness significantly improves visibility during driving, turning, and braking, greatly boosting overall safety on the road.. 60,000 HOURS LIFESPANThe upgraded rear turn signal kit is built with a safety circuit board that includes overload protection, low power consumption, and efficient heat dissipation to prevent overheating. Engineered for long-lasting performance, it boasts a lifespan of over 60,000 hours.. 4 HIGHLY TRANSPARENT LENSThe set of 4 smoked lens covers is crafted from IP67 waterproof PC material, effectively protecting your turn signals from dust and debris. Their high-transparency design ensures maximum light output for enhanced visibility, combining style and function to complement your motorcycle perfectly.. SUPER QUICK INSTALLATIONThe wireless all-in-one running, brake, and turn signal light fit for Harley features a plug-and-play design, allowing for quick and hassle-free installation in just 3 minutes. Note Some models may require a load resistor to resolve fast flashing issues.. WHAT WILL YOU RECEIVEThe package includes 2 rear turn signals and 2 smoked lens covers. Note Not compatible with 3-inch flat-style or 3 14-inch turn signals..

COMPATIBILITY - 3 14 Inch led turn signals flat style with1157 1156 compatible for For Electra Glide FLHTK 2010-2013, FLHTCU 2017-2019, FLHT 2001-2009, EFI FLHTI 2003-2006, FLHFB 2023, FLHTC 2001-2013, EFI FLHTCI 2001-2006, FLHFB 2023. For Road Glide FLTR 2001-2002, EFI FLTRI 2001-2003. Road King FLHR 2001-2022, EFI FLHRI 2001-2006, EFI FLHRCI 2001-2006, FLHRC 2007-2013. For Ultra Limited FLHTKL 2017-2019, FLHTK 2017-2023.. COMPATIBILITY - Upgraded led chips and high indensity design 81smd chips make high brighter for safe riding no matter in day or at night, They are compatibleFor Tour Glide FLT 1986-1996, FLTC 1986-1991, FLTCU 1989-1993, FLTCI 1986-1996. For Heritage Softail Classic FLSTC 1999-2017, FLHRC 2007-2013. For Trike FLHXXX 2010-2011 Excluding FLHTCUTG, FLRT. For Ultra Classic Electra Glide FLHTCU 2007-2013, EFI FLHTCUI 2001-2006. PLUG N PLAY SOCKET - Compatible for 3 14 inch led turn signals 11571156 front rear kit set add more highlight for your bike. New integrated handle design. Some orlder fit for Harley models, may require a load equalizer listed 2010-earlier Softails2011-earlier Dynas2013-earlier Sporsters2013-earlier Touring and Tri-Glide models.. HIGH BRIGHTNESS - Built in 81 PCS SMD LED light, lower power consumption, long lifespan up to 50,000h, 200 brighter than halogen bulbs with wider range illumination makes you were more easier noticed while riding. Clear back protection, anti-scratch and waterproof.. SWITCHBACK MODE - Higher indensity design, Brake Turn Signal Tail Light Combo Light Kit. The front bulbs are halo effect turn signal, outer halo white for running light and center amber for turn signal. The rear integrated tail light with brake light and runninglight, full red for brake light, outer halo red for running light. It can light up the road makes you to be more noticeable when you ride in dark.. Note-Some orlder fit for Harley models, may require a load equalizer.Load equalizer not included..

WIDE COMPATIBILITYThe 3 14-inch LED turn signals fit for Harley-Davidson Dyna, Softail, Sportster, Touring Road Glide Road King Street Glide 1986 - 2024, designed to fit standard 3 14-inch flat-style turn signals. 400 SUPER BRIGHTERThe 1157 turn signal light compatible for Harley features 81 high-brightness SMD LEDs, this turn signal light delivers up to 400 brightness illumination compared to traditional halogen lights and 24 LEDs. The high-brightness turn signal enhances driving safety by improving visibility during driving, turning, and braking. 50,000 HOURS LIFESPANThe upgraded front rear turn signals kit features a safety circuit board with overload protection, low power consumption, and efficient ventilation to prevent overheating. Designed for durability, it offers a lifespan of over 50,000 hours. 4 HIGHLY TRANSPARENT LENSThe 4 smoked lens covers are made of IP67 waterproof PC material, shielding your turn signals from dust and dirt. The high-transparency design ensures optimal light output for clear visibility. Looks and works well on your motorcycle. SUPER QUICK INSTALLATIONThe wireless all-in-one running brake turn signal light for Harley offers a plug-and-play design for fast, hassle-free installation in just 3 minutes. Note Some models may require a load resistor to correct fast flashing. WHAT WILL YOU RECEIVEThe package includes 2 front turn signals, 2 rear turn signals, and 4 smoke lens covers. Note Not compatible with 2-inch bullet-style or 3-inch flat-style turn signals. A load resistor is required to adjust the flash rate.

FITMENT? Fit for 1986-2024 Touring Road Glide Special, Street Glide,Street Glide Special, Road Glide Special, Road Glide Excluding CVO Limited Classic Ultra Fit for 1986-2024 Softail Fat Boy S, Fat Boy S, Fat Bob, Sport Glide, Slim, Low Rider, Fat Boy, Low rider S ect Fit for 1986-2024 Sportster SuperLow 72 48, 1200 Low, Iron883, iron 1200, 883R 1200T ect. Fit for 1986-2024 Dyna Low Rider, Wide Glide, Fat Bob, Street Bob ect.. 400 SUPER BRIGHTThe 1157 turn signal light compatible for Harley features 48 high-brightness SMD LEDs, providing a 400 brightness compared to halogen lights and 24 LEDs. The high-brightness turn signal enhances driving safety by improving visibility during driving, turning, and braking. Drive safely every moment. 50,000 HOURS LIFESPAN The upgraded front rear turn signals kit features a safety circuit board design with overload protection, low power consumption, and effective ventilation to prevent overheating, extending the service lifespan to over 50000 hours for enhanced durability. 4 HIGHLY TRANSPARENT LENS The 4 smoked lens covers are made of IP67 waterproof PC material, shielding your turn signals from dust and dirt. The highly transparent lens maintains optimal light output, ensuring clear visibility of your turn signals. Looks and works well on your motorcycle. 3 MINS QUICK INSTALLATION The running brake turn signals light compatible for Harley features a wireless all-in-one design, making it plug-and-play and quick to install in just 3 minutes, saving you valuable time. NOTE Some models may need a load resistor to adjust the flash rate for faster flashing. NOTE? Only fit for Harley motorcycles, not fit for other brands. Does not fit 3 14 turn signals,only fits 2-inch turn signals. If a slower flash rate is desired, the load resistor is required.. WHAT YOU WILL GET2 x front turn signal 2 x rear turn signal 4 x smoke lens cover. NOTE Does NOT fit 3-14flat style turn signals. A load resistor is required for a slower flash rate.

WIDE COMPATIBILITY - The 2-inch LED turn signals fit for Harley Davidson Dyna, Softail, Sportster, Touring, Street Glide, Road King, and Road Glide models 1986-2024, compatible with 2-inch standard bullet-style turn signals. 400 SUPER BRIGHT - The 1157 front turn signal light compatible for Harley features 48 high-brightness SMD LEDs, providing a 400 brightness compared to halogen lights and 24 LEDs. The high-brightness turn signal enhances driving safety by improving visibility during driving, turning, and braking. Drive safely every moment. 50,000 HOURS LIFESPAN - The upgraded front turn signals kit features a safety circuit board design with overload protection, low power consumption, and effective ventilation to prevent overheating, extending the service lifespan to over 50000 hours for enhanced durability. 2 HIGHLY TRANSPARENT LENS - The 2 smoked lens covers are made of IP67 waterproof PC material, shielding your turn signals from dust and dirt. The highly transparent lens maintains optimal light output, ensuring clear visibility of your turn signals. Looks and works well on your motorcycle. 3 MINS QUICK INSTALLATION - The running brake turn signals light compatible for Harley features a wireless all-in-one design, making it plug-and-play and quick to install in just 3 minutes, saving you valuable time. NOTE Some models may need a load resistor to adjust the flash rate for faster flashing. WHAT YOU WILL GET - 2 x front turn signal 2 x smoke lens cover. NOTE Does NOT fit 3-14flat style turn signals. A load resistor is required for a slower flash rate.

High-Brightness Motorcycle Underglow with Vibrant RGB Effects Ideal for Night Riding Show Display This 8-piece LED motorcycle underglow lights features 96 high-brightness LEDs, delivering vivid, eye-catching RGB illumination for night rides, bike meets, and show displays. With 16 million colors and 23 dynamic modesflashing, breathing, fading, jumpingyou can customize the atmosphere for cruising, group rides, motorcycle shows, parades, festivals, or weekend events. Music-sync mode allows the lights to pulse with the beat, creating an impressive visual effect during gatherings or parking-lot meets.. 3 Control Methods for Ultimate Convenience Control your lighting easily via Bluetooth APP or 24-key 4-key RF remotes. Adjust brightness, speed, and colors with 12 gradient modes, 8 strobe modes, 7 static modes, and 2 jumping modes, plus voice control, shake-to-change-color, DIY color settings, and timer scheduling. Whether cruising downtown, attending a motorcycle festival, or showcasing your ride at an exhibition, you can fine-tune your lighting instantly.. Unique Brake Light Turn Signal Functions Safer for Night Riding, Traffic, and Group Rides This RGB motorcycle underglow kit includes optional brake and turn signal features designed for real riding conditions. When braking, all strips illuminate in bright red, making you more visible in traffic, tunnels, or night roads. During turns, the corresponding side flashes amber, helping surrounding riders and drivers quickly understand your actionsideal for group rides, congested streets, mountain roads, and long-distance touring.. IP68 Waterproof Flexible Adhesive Strips Built for Daily Commuting, Touring Rough Roads Motorcycle led underglow light kit uses sealed silicone tubing and heavy-duty coating for true IP68 waterproofing, resisting rain, mud, splashes, and dusty trails. The flexible, cuttable LED strips fit wheel arches, underbody areas, fairings, frames, and moreperfect for street bikes, cruisers, dirt bikes, and touring motorcycles. Strong pre-applied adhesive ensures secure mounting on curved surfaces, even during long-distance rides, uneven roads, or high-vibration environments.. Universal 12V FitPerfect for Night Riding, ShowsFestivals Designed for most 12V DC motorcycles, including Sport Bikes, Cruiser, Touring, Street, Bagger, Adventure and Dirt Bikes. Compatible with Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, BMW, Ducati, KTM, Indian, and more. Also suitable for ATVs, UTVs, Side by Side and Trikes with 12V systems. Ideal for mounting on underbody, frame, fairings and accent areas, this motorcycle LED underglow kit is perfect for night riding, city cruising, bike shows, meets, parades, festivals, charity rides, touring and daily commuting, enhancing visibility, safety and custom style with vivid RGB lighting.. Dual-Zone Control for Fully Personalized Lighting Take your motorcycle lighting to the next level with Dual-Zone Control, supported only via the 24-key or 4-key RF remotes. Independently adjust the leftright zones or frontrear zones, allowing different colors, dynamic modes, or effects on each side of your bike. Whether you want a subtle underglow on one side, a vibrant show on the other, or a creative combination for night rides, group cruises, or exhibitions, Dual-Zone Control gives you unmatched flexibility and personalization that single-zone kits cant offer..

Please Confirm CompatibilityBenlari 1157 led front turn signals are designed for most motorcycles with 2 inch standard bullet style turn signals, especial fit for Harley Davidson Touring, Dyna, Softail, Sportster, Street Glide, Road Glide, Iron 883 and other models. Note DO NOT FIT 3-14 and 1156 Single Contact. Please check the user manual and the bulb size to verify the compatibility before purchasing. Upgrade Chips, 400 Brightness ImprovementEquipped with 48 pcs high luminous efficacy led chips, our motorcycle led turn signals produce a super bright lights keep a distance between vehicles and more effective warning, improving your visibility up to 400 while driving at night. 5 Mins Quick Installation, Plug-n-PlayThanks to the direct plug-n-play design, no external wire or connector, make the led turn signal kit plug and play like halogen bulbs, smoothly fits into your front turn signal or rear tail light housing within a few minutes, even with limited space in original lights' housing. Multi Application, Drive SafelyAs good replacement for Harley turn signals, it comes with 2 led bubs, full white or amber switchback modes for front turn signal lights or daytime running lights , directly fit and give your motorbike a stylish overall look and make it stand out, also allowing you to drive safer in bad weather. Stable Performance, 50,000Hrs Long LifespanHigh quality top-grade aluminum material and efficient cooling design make these 1157 led switchback turn signals achieve stable performance and longevity, lifespan can be up to 50,000 hours, let you say goodbye to the trouble of frequent bulb replacement.

500 BRIGHTER THAN HALOGEN Benlair 2023 new motorcycle led turn signals adopts top automotive-grade LED chips which provides super bright light output, 4 times brighter than ordinary halogen bulbs, make more attention and delivering a safer driving experience at night to you. FITMENT Benlari 1157 led turn signals fit for most motorcycles with 2 bullet style turn signals, compatible for Harley Davidson, Touring, Dyna, Softail, Sportster, Street Glide, Road Glide, Iron 883 and other models. Warm Tips DO NOT FIT 3-14 and 1156 Single Contact. Please check the user manual and the bulb size to verify the compatibility before purchasing. LESS THAN 3 MINS EASY INSTALLATION All-in-one wireless design,simply plug and play, directly sit into your motorbike front turn signal and running light housing within a few minutes. No extra steps, no any modification, save time and stay away from all kinds of installation problems. DUAL MODE FUNCTION A great upgrade compatible for Harley front turn signals, it comes with switchback mode in a same bulb, which is whiteamber light ,meet your various needs while driving. EXTENDED 50,000HRS LIFESPAN With the aircraft grade aluminum and integrated temperature control element, Benlari 1157 led switchback turn signals operate in a normal working temp range and provide up to 50,000 hours lifespan.

Ultra-Bright Safety LEDs Each turn signal light contains up to 36 super-bright LED beads, ensuring that you are clearly visible both day and night. Whether you're riding through city streets or along country roads, significantly improve your visibility and driving safety.. Unique Flowing Design The 2 pcs unique flowing LED light effect adds a touch of style to your motorcycle, making it not only eye-catching but also effectively conveying turn signals to other drivers. This modern design is both functional and attractive, enhancing the appeal of your vehicle.. IP67 Waterproof With an IP67 waterproof rating, these turn signal lights can withstand rain, snow, and muddy conditions. Made from durable materials, they are built to last and ensure reliable performance under various weather conditions, providing dependable safety for your rides.. Easy Installation Designed for hassle-free installation, these turn signal lights can be replaced in just minutes without special tools or complicated steps. Simply connect the black wire to the negative terminal and the yellow wire to the positive terminal. Compatible with most 12V motorcycles, upgrading your bike has never been easier.. Wide Model Compatibility Equipped with mounting bolts, these turn signal lights are suitable for most 12V motorcycles, scooters, cruisers, Harleys, dirt bikes, etc. Whether for front or rear lights, this product perfectly matches the needs of your beloved bike..

Wide Application. Benlari motorcycle LED turn signals with a 8mm10mm mounting hole are fit for most bike models, including fit for Harley Davidson Sportster, Softail, Cruiser Off-Road, Street Bike Cafe Race, and other motorcycles. Safety Circuit Design. The Benlari bullet turn signals feature 48 built-in LED chips and a safety circuit design for overload protection. Upgraded Exterior Design. Improve the design of the grille lampshade, increase the luminous area, reduce the obstruction of light emission, and achieve better luminous effect. Two Matching Methods. The lamp body is made of M8 bolts, and we also provide M10 parts. You can install the corresponding specification bolts according to your own needs. Special Water-Resistant Design. Equipped with a sealing ring for the lamp cover, it is not easy for water to enter and has a waterproof rating of IP65, which is water-resistant and dust-resistant. NOTE ? Some models may flicker too quickly and require install a load equalizer. Please pay attention to the model and year before purchasing.

Fitment Motorcycle fork turn signals fit for Harley Honda Kawasaki Suzuki Yamaha Ducati Indian Victory BSA Cruisers Cafe Racers Streetfighters Project Bikes Chopper Bobber. SizeUniversal installation Diameter 43-46mmWe are equipped with 0.5mm-2mm rubber gasket, you can use the rubber pads to get it to the right size, generally installed on the front fork. Mount 2-wire connection, Red--turn signal Black--negative. Power 12V 1.2W. Experience enhanced visibility during nighttime, foggy, or rainy conditions, ensuring safer travels in any weather. Note Depending on the year of the bike and what functions you want the lights to have, you might have to use a load equalizer. Material Aluminum, Machine by CNC. Aluminum housing is hard and easy to keep clean, not easily scratched or cracked. Package 2 pcs motorcycle turn signals, easy to install.

Wide Compatibility 10mm mounting bolt compatible for most DC 12V motorcycles with 10mm frontrear turn signal light.The flowing mode makes the motorcycle more upscale and attracts more attention. Super Bright 34 LED Lamp Beads Each turn signal light has 34 SMD LEDs built in. When riding at night, oncoming or rear motorcycles can easily notice your direction signal, making your driving safer. Sequential Lights Compared with ordinary LED motorcycle turn signals, our turn signals have added a sequential flashing function. They light up sequentially from one side to the other when the turn signal is activated, adding a stylish light appearance to your motorcycle. IP65 Waterproof Resistant These motorcycle LED turn signal lights are IP65 waterproof design, anti-rust, the housing and studs are super waterproof. Easy to Install Black wire is negative, yellow wire is turn signal light, white wire is DRL, red wire is brake light, bule wire is tail light. Directly mount to the original turn signal light place.

WIDE COMPATIBILITY - Motorcycle LED turn signals with a 10mm mounting hole are compatible with most bike models, including fit for Harley Davidson Softail, Cruiser Off-Road, Street Bike Cafe Race, and other motorcycles.. ULTRA BRIGHTNESS - The upgraded 2PCS LED lights have high-power SMD chips for increased visibility, being over 3 times brighter than halogen lights, and with a lifespan exceeding 50,000 hours. The bullet turn signals feature 24 built-in LED chips and a safety circuit design for overload protection.. UPDATE MATERIAL - The motorcycle blinkers feature a glossy black painted shell and high-quality glass lens, resistant to corrosion. They are sturdy, shockproof, and waterproof, making them ideal for outdoor use. The bullet-style exterior enhances your motorcycle's appearance.. 3 WIRES SET UP - Black wire for ground, white wire for running lights, and yellow wire for turn signal. To switch to 2-wire modes, select two of the three wires based on your motorcycle's specific circuit.. VARIOUS APPLICATION - The bullet turn light is a versatile lighting solution designed to fit a wide range of applications, including motorcycles, eBike and more. With its IP67 waterproof, these LED motorcycle turn signals are made to withstand harsh weather conditions such as rain, fog, and even extreme environments..

All-in-one Functions This movotor taillights can be used as running light, brake light, turn signal lightturn leftright. White Light used as license plate light The brake light and turn signals light built together. Providing good visibility, it makes your driving much safer. Lay Down Style, which is angled to follow the curve of your rear fender for the streamline look.. Upgraded Design New upgraded batch The back housing is tightly sealed, with waterproof IP67, it could effectively prevent moisture entering. The performance of the tail light will not be affected even if you encounter any inclement weather. Upgraded turn signal plug, directly plug and play, easy to install.. Fitment Fits for Harley Sportster 883, Sportster 1200, Dyna, Tour Glides, Road Glides, Road Kings, All 1991-2010 FLST Models except 1991-2000 FLSTF, 2005-2010 FLSTN, 1997-2003 FLSTS, 2005-2007 FLSTSC, 2010 FLSTSEAll 2002-2010 FXST Models except 2002-2007 FXSTD, 2007-2009 FXSTSSE, 2008-2010 FXCWC1991-2010 Electra Glides except 2005 FLHTCSE, 2009 FLHT Standard.. Durable Materials This new upgraded tail light is made of rugged and durable ABS plastic, which could effectively protect tail light from damage while driving. Equipped with high intensity 60pcs LED chips, brighter than stock tail light. Our tail light is built to last, with sealed housing and waterproof IP67, it could work perfectly in any inclement weather.. Wire for functions Running--White Wire, Brake--Red Wire and Turn Signal Yellow wire-- right turning Blue wire-- left turning Black wire--Negative. Package 1 Piece Low Profile Smoked LED Tail Light. This tail light has 12 months friendly product support..

Excellent MaterialThe DREAMIZER turn signal light is made of high-quality aluminum alloy housing and ABS plastic lenes, which is durable and can protect the LED chips from damage. The cool chrome appearence with yellow lenses could make your motorcycle stand out on the road.. Great PerformanceBuilt-in 15 high-visibility LED bulbs provide brighter light output, which makes you more eye-catching while driving, greatly improving visibility at night, in foggy and rainy days or any extreme weather, making your driving safer.. IP67 waterproofThese turn signals are made of stable and durable materials, it is waterproof, dustproof, corrosion-resistant and scratch-resistant. The edges are well sealed and waterproof to keep light out in extreme heat, cold, rain, snow and other weathers.. Easy InstallationEasy to install, simply remove the old turn signal lights and install new ones where they were removed. The Black wire is connected to Negative the Yellow wire is for the Running Light and the Red wire is to the Turn Signal Light.. High CompatibilityUsed for most DC 12V motorcycle specially compatible with Harley Honda Kawasaki Yamaha Street Bike Cruiser Adventure Touring Dirt Bike and other motorcycles equipped with 10mm mounting holes..

Universal Fit These mini motorcycle turn signal lights use a standard M6 mounting bolt, making them suitable for most Cafe Racer, Bobber, Cruiser, Chopper, and Street motorcycles. Designed for broad compatibility across a wide range of aftermarket applications.. Sleek Retro Design Crafted with a zinc alloy metal housing and a smoked lens, our small LED turn signals exude a distinctive retro charm. adds a touch of vintage elegance to your ride, making it stand out from the crowd.. Ultra-Bright LED Engineered with incredibly bright SMD LEDsthe amber lights are much brighter than halogan bulbs. Enhance visibility and safety when you are turning.. Compact Size, Big Impact Their small footprint doesn't compromise on brightness, making them a perfect blend of style and functionality. Experience a minimalist look that makes a maximum impact.. Easy Installation Simplify your customization process with the straightforward installation of our mini LED turn signal lights. Just connect the black wire to the negative terminal and the red wire to the turn signal control end..

Hign Performance7 Round LED Headlight, High Performance High-Low Beam,White DRL,Amber LeftRight Turn Signal.. Easy installation Plug and Play LED Canbus H4H13 AdapterMaintenance Free Water-proof IP67. Newest DesignMade of 6pcs original 10W high quality led chips, with 4 lighting modes high beam, low beam, daytime running light and amber turn signal light. white halo ring for DRL, amber halo ring for turn signal, high beam with 4200LM60W, low beam with2400LM30W.. Wide ApplicationFits FXWG, FXDWG, and FXST models with 7 LED Headlight 2004-2014 Sportster XL883 XL1200. Package Includes1 pcs 7 inch DRL is white Amber LeftRight Turn Signal headlight 1 pcs 7 inch housing bucket1 pcs H4 to H13 adapter..

Universal Fitment 10mm mounting bolt compatible with most 12V DC motorcycles, designed for 10mm frontrear turn signal lights. The flowing dynamic mode enhances your motorcycle's premium look while ensuring greater visibility and attention. Ultra-Bright 36 LED Turn Signals Each turn signal light is equipped with 36 built-in SMD LEDs, ensuring high visibility so that oncoming and following riders can easily see your signals at nightenhancing your safety on the road. Sequential Amber Lights Our LED motorcycle turn signals feature a sequential flashing function, lighting up from one side to the other when activated. This dynamic effect enhances both visibility and style, giving your motorcycle a sleek, modern look. IP67 Waterproofing Built with an IP67 waterproof and anti-rust design, these motorcycle LED turn signals have tightly sealed housings and studs to withstand tough weather conditions. Easy Install 2-wire connection Simply replace your original turn signal with this upgraded light. Connect the yellow wire to the turn signal circuit and the black wire to the ground. The amber LED can be installed on either the front or rear as a turn signal light.

Small but BrightEquipped with 4pcs high power SMD LEDs per light, mini size but much brighter than halogen bulbs, makes it more noticeable when driving to increase safety, also enhances the look of your motorcycle to more modern, stylish, and functional. Excellent QualityMade of matt black painting aluminum alloy shell and high-quality glass lens, not easy to corrosion or scratch, fully sealed on the edge, with good water resistance, ideal for outdoor use. Easy InstallationIf your original blinker has 8mm mounting bolts, just remove the original one and then replace the new light if no suitable hols, please drill an 8mm hole where you to mount the new turn signals to DIY your motorcycle. Wide CompatibilityUniversal fit for 12V DC motorcycles, motorbikes scooter Scooter Quad Cruiser Off Road Street Bike Cafe Race and other motorcycles with 8mm mounting bolt. TipsMost models have LED compatible turn signal relay, but for a few special models old models need Load Resistor to help the signal flash.

THREE WIRE, DUAL-INTENSITY - Our lights are so much more than just secondary tail lights. Built with a three-foot, three wire cable, and dual-intensity circuitry, these lights function as tail lights and brake lights or turn signals.. SAFETY AND PERSONALITY - Brake lights save lives. But your brake lights can only protect you if they can be seen. Packed with 15 high-intensity LEDs, our 5 strip lights are faster, brighter, and better looking than traditional brake lights.. LEAVE THE STRESS BEHIND - IP68 rated and completely silicone sealed, our lights will continue to perform day in and day out, rain or shine, dirt or asphalt.. CLEAN AND LOW - At only 18 thick and 12 wide, our low-profile, hyper-flexible, strip lighting is designed to conform to the lines of your bike and blend seamlessly with your unique looks.. DIRT, TRACK, OR STREET - Truly flexible in design and application, our red LED strip lights are perfectly suited for any kind of vehicle you can think of. Install them on your bike, your snowmobile, and your truck.

32SMD high brightness 2835 LED chips per lights for maximum illumination. Working Voltage 12V.. Supports four functions Running Tail Light, Bake Light, Left Turn Signal and Right Turn Signal Lights.. All-in-one design. Perfect for Motorcycle Scooter Quad Cruiser Off Road etc. Easy Installation Mount with 3M tape, 5 wires connection.. Made with a durable flexible FPC plastic rust-resistant strip and filled with IP65 watertight silicone ensure it could work well in any weather.. Livtee LED are strictly tested for sale Any issues or questions please feel free to contact us, we are always here to satisfy all of you..

Wide Compatibility. 10mm mounting bolt compatible for most DC 12V motorcycles with 10mm frontrear turn signal light.The flowing mode makes the motorcycle more upscale and attracts more attention. Super Bright 22 LED Lamp Beads. Each turn signal light has 22 SMD LEDs built in. When riding at night, oncoming or rear motorcycles can easily notice your direction signal, making your driving safer. Sequential Amber Lights. Compared with ordinary LED motorcycle turn signals, our turn signals have added a sequential flashing function. They light up sequentially from one side to the other when the turn signal is activated, adding a stylish light appearance to your motorcycle. IP65 Waterproof Resistant. Benlari motorcycle LED turn signal lights are IP65 waterproof design, anti-rust, the housing and studs are super waterproof. Easy to Install. Black wire is negative, yellow wire is turn signal light, white wire is DRL, red wire is brake light. Directly mount to the original turn signal light place.

Package of 2PCS New Model Motorbike Scooter Off Road High Brightness Flowing Indicators LEDS Lamps,Each Lamp with 36pcs High Brightness LED Chips make it more brighter than the old model blinkers. Only Flowing Water Model. ABS plastic material IP67 waterproof,perfect performance in rainy days.Flexible rubber protect lamp from damage.. High transparency curved shell with a large irradiation range,effectively flowing indicator blinkers prevent accident happen.. Input VoltageDC 12V LED LampsBuilt in constant current with stable output,Low power consumption ModelSequential Flowing Water.. Lamp Size 4.88 Inch x 0.95 Inch x 1.25Inch Cable Length 8.2 Inch..

Turn Signal With Projection This motorcycle signal light features turn signal amber indicator with a clear amber arrow projection onto the ground sync flashing, enhancing visibility and improving safety in your riding. Super Bright Motorbike LEDs Indicator Using SMD LEDs, providing 300 brightness compared to halogen motorcyle signal lights. This high-brightness motorcycle led turn signal blinker let other driver easily notice your turning moment at day an night. Long Lifespan-Equipped with energy-saving and heat-controlling chip, protect the motorcycle blinkers from overloading or overheating damage. The projector film is made of upgraded HD glass, heat resistant and the arrow pattern never fading. Extending service lifespan to enhanced durability. Built to Last Design-Smoked anti-age PC material lens maximum optimal light output, ensuring clear visibility of your motorcycle turn amber light. Thickened plastic shell and precise assembly makes this motorcycle led turn signals features IP67 waterproof and dustproof, fearless of bad weather condition. Easy Install- This 2 wires motorcycle front rear turn signals compatible most motorbike.Black wire connect with Negative-Ground, Yellow wire connect with Turn Signal Control wire of your motorcycle.

FITMENT - These motorcycle LED bullet turn signal lights are universal, fit all 12V motorcycles will 10mm mount holes. Fit for Cruiser Chopper Bobber Cafe Racer Street Bike and so on.. BRIGHT LED - These motorcycle rear LED indicators are feature fast-acting, extra bright 12pcs LEDs set in compact bullet-shaped die-cast housings. Much brighter and longer service life than halogan bulbs.. AMBER LIGHT - These Cruiser small turn signals have two different brightness amber lights. The brighter amber light can work as a turn signal light, and the other can work as a daytime running light.. ZINC ALLOY - Different from many aluminum alloy motorcycle turn signals, these street bike turn signal lights are made of heavy-duty zinc alloy, which are more sturdy, shiny, and durable.. PACKAGE CONTENT - 2 x Bullet Shaped Turn Signal Lights LED Instruction NOT Included. 3-wire connection Black--negative ground, Yellow--daytime running light, Red--turn signal light..

MATERIAL 24 gauge teflon coated wire leads with black heat shrink sheathing, make sure wrap-around LED turn signal stay in place even on the hottest summer day. DURABLE With 3M double side adhesive mounting tape on back and Zip Ties for added strength. GOOD DESIGN 120 degree viewing angle for wider visibility, more secure and brighter. Can work as turn signals, running, license plate lights, etc. Waterproof Sleek. LED Fork Warp Lights Come with 36pcs supper bright 3014-SMD Leds each strip, Wrap around your motorcycle forks. Used as front and rear signals light. Fitment Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands, Fit for Harley 39mm-70mm Fork as well..

Package Including 1 Dual Color Motorcycle Scooter LED Lamp,ONLY Need 1 Pcs lamp with 3 functions maximum visibility and safety. 3 In 1 - Driving lights Left and Right Turn signal Brake Stop light . Waterproof In Rainy Weather,Totally Glue Seal Design IP67 Waterproof Level Made It Steady Woking Performance In Rainy Days.. Connection Guide Black wire--Negative, Yellow wire--Turn signal Sequential,Green wire--Turn signal Sequential, White wire-- Position light,Red wire --Brake light Size For The Lamp - Length 125mm Width35mm Height21mm Screw Diameter M4.5 Hole Spacing69mm Wire length Around 50cm. Driving lights When the taillights are activated, the red breathing mode is scanned four times before switching to a constant lights Low Beam Red Light Brake light When braking, it flickers four times and switches to a constant red light High Beam Red Light Turn signal Left Right sequential flowing turn signal led lights LeftRight Flowing Amber light.. DC12-80V Working Voltage,Widely Use On Motorcycle,Scooter,Electric Motobike,Moped..

Universal Compatibility 8mm mounting bolt, used for most DC 12V motorcycle specially compatible with harley street glide softail road glide sportster, honda gl1800 vt600c vt750c2b, kawasaki en500, suzuki m109r, triumph bonneville thunderbird, yamaha roadstar. Super Bright Equipped with 4pcs high power SMD LEDs per turn signals, mini size but much brighter than halogen bulbs, bright light output makes you more noticeable when driving to increase safety and give your motorcycle a sleek look. IC controlled, no higher flashing. Waterproof Made of high quality glass lens and painted black metal housing, anti-corrosion and anti-scratch. sealed well on the edge, water tight, stay illuminated in extremely hot, cold, rainy or snow days. Best replacement for old dull indicator. Easy Installation Two installation methods, if your original blinker is with 8mm mounting bolts, just remove your stock turn signal and install the new light on where the old one was removed. Or drill an 8mm hole on where you to mount the new turn signals to DIY your motorcycle. Package Including 1 Pair front mini size led turn signal light..

CompatibilityThe LED motorcycle turn signals are universal. Fit for most 12V motorbikes, such as compatible with Harley Dyna, Road King, Electra Glide, Road Glide, Softail, Honda Shadow, Grom, Yamaha, Suzuki, Kawasaki Vulcan, Ninja, Ducati, BMW, Hyosung and other motorcycles with 10 mm turn signal mount holes.. Added White Running LightUpgrade design, switchback mode, all-in-one, meet your needs. Amber for turn signal, white for running light, and made of aluminum shell with smoke lens cover, stylish, nice and attractive, add features and enhance your motorcycle appearance. Easy wiring, Black--negative Brown--turn signal Red--running light.. 3X Brighter Than Factory LightBuilt-in COB LED bulbs, providing brighter light output, greatly increased your visibility at night, foggy and rainy days or any extreme weather, make your driving safer. Made of CNC machined aluminum, sturdy and make it resistant to shockproof, corrosion and waterproof.. Motorcycle Turn Signals Relocation Bracket KitCome with 1 pair of motorcycles fork mount clamps. Sturdy mounts designed for 30mm-43mm front fork to make the lights more stable. Equipped with the handle which is designed for easy installation.. Buy with Confidence1 Pair front turn signals1 pair motorcycle mounts bracket. Please don't hesitate to get in touch with us if you have any questions..

FITMENT - Aftermarket motorcycle turn signals led with 8mm mounting hole fits for most bike models, including fit for Harley Davidson Sportster, Softail, Cruiser Off-Road, Street Bike Cafe Race, and other motorcycles. WATERPROOF - Motorcycle LED turn signals feature a fully sealed structure with premium lens design, effectively blocking rain, snow, dust and mud to prevent short circuits. Ensures stable operation in daily riding conditions and extends the blinkers life service. BRIGHTNESS LED TURN SIGNALS - Each led Indicator is built with high-power LED chips. It's brighter than halogen bulb. They deliver intense and steady illumination, seamlessly changing colors, and introducing innovative lighting modes to enhance safety during both day and night rides. PREMIUM HOUSING QUALITY - Crafted for durability, these motorcycle turn signals led feature a robust CNC aluminum housing that provides exceptional protection for the internal LED chips. The PC lens is meticulously edge-sealed, ensuring effective waterproofing and dust resistance, making these motorcycle blinkers suitable for all weather conditions. WIRES CONNECTION LIGHT MODE - FRONT LIGHT Black wireGND, white wirerunning lightwhite light, yellow wireturn signalsamber. REAR LIGHT Black wireGND, white wirerunning lightsred light, red wirebrake lightsbrigh red, yellow wireturn signalamber.

Compatibility - Handlebar mini turn signals compatible with Harley Sportster Dyna Iron 883 Fat Bob Softail and Touring, Honda Shadow Grom, Suzuki Boulevard, Triumph Bonneville Thunderbird. Also universal compatible with Yamaha, Kawasaki, Ducati, Cruiser, Choppers, Street Bikes, Cafe Racers, and any custom application. Universal fit for most motorbikes with 8mm rearview mirror bolts.. Added Running Light Function - Upgrade design, switchback mode, all-in-one, meet your needs. Amber light for front turn signal, white light for running light, stylish, nice and attractive, add features to your motorcycles, enhance your motorcycle appearance. Can be mounted under the handlebar mirror bolts. Easy wiring, black to ground, yellow to turn signals, white to driving light.. 180 Degrees of Visible Light - Mini handlebar turn signal indicator built in 6 PCS LEDs, low power consumption, 99 reduce burning bulbs, energy saving. Greatly increased your visibility at night, foggy and rainy days, or any extreme weather, make your driving safer.. Waterproof Durable - The front led turn signals made of smoked PC lens, anti-scratch and waterproof, protect led chips from water or dirt damage without weakening light, prolong the life service time. Metal bracket processed with black anodized finish, anti-oxidation, anti-corrosion.. Package Included - 2 x motorcycle handlebar blinkers..

4 PCS Turn Signal LightsComes with 4 PCS Turn Signal Lights, Suitable for Motorcycle Motorbike Scooter Off Road.. Unique Flowing LED Lighting DesignAmber Color and Flowing Mode, Cool Design, Perfit Fit For Turn Signal and Indicators Usage.. Super BrightBuilt-in 315 Side Light Beads, The Brightest Lights on the Market.. High Flexible Rubber DesignCurved Style, Which Can Effectively Prevent Accidental Falls.. Easy to InstallConnection Guide Black Line is Negative , Red Line is Positive Lamps Size 11x2.5cm, Cable Length 25cm, Easy Installation, Directly Mount to the Original Turn Signal Light Place.Noted it maybe need an LED FLASHER avoid error flash very fast..

CompatibilityThese bullet led turn signal light fit all motorcycles with 2 inch bullet led turn signal light, especially fit for 2011-2013 Harley Blackline, 2013-2017 Harley Breakout, 2009-2017 Harley Dyna, 2012-2017 Harley Forty Eight, 2009-2017 Harley Iron 883, 2012-2017 Harley Night Rod Special, 2010-2017 Harley Road Glide, 2017 Harley Road King, 2016-2017 Harley Roadster, 2012-2016 Harley Seventy Two, 2010-2017 Harley Softail, 2008-2012 Harley Sportster 1200, 2010-2017 Harley Street Glide.. 1157 Front LED Turn Signal LightStill worried about unsafe riding at night The light board is composed of 48 pcs led bulbs, 2x brighter than halogen bulbs for lighting output, increasing your visibility while riding at night or rainy days, greatly improve your driving safety. Switchback mode, outer white ring for runningparking light and center amber for front turn signal. Amber-Out-Amber-Out blinking. White halo ring is out while blinker is on. 1157 Rear LED Turn Signal LightStill worried about unsafe riding at night The light board is composed of 48 pcs led bulbs, 2x brighter than halogen bulbs for lighting output, increasing your visibility while riding at night or rainy days, greatly improve your driving safety. Switchback mode, Outer red ring for running light, all bulbs light up and flashing for turn signal, all bulbs light up for brake light. Easy to InstallNOTE Please dont pull the lights and wires too hard, otherwise the turn signal will easily break. When you insert the turn signal, then gently twist the wire clockwise. Plug and play, equipped with handle design, only 2-3 minutes are required to install. 1157 double contacts, no wiring needed. Just take off your stock bulb, and then push everything back to it's original place. Buy with ConfidenceCome with 2Pcs 1157 Front turn signal light 2Pcs 1157 rear turn signal light 4pcs smoked lens cover 4pcs load resistors. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions, solutions will be offered once detail is confirmed..

Do I need a flasher or resistor If the left and right turn signal lights blink at different speeds, an LED flasher or resistor may be required to ensure consistent illumination on motorcycles with traditional relays. Wide Compatibility Suitable for most motorcycles, UTVs, ATVs, dirt bikes, ebikes, and mopeds with 12V voltage. Designed for both front and rear turn signals, with a 240mm wire length and M8 screw size for easy installation. High-Quality Construction The aluminum alloy lamp shell offers superior waterproofing, impact resistance, heat resistance, and friction resistance. Equipped with a rubber cover and sealed wires to ensure true IP67 waterproof protection. High Brightness LED Featuring an amber LED with 150cd brightness, 12V voltage, and 1.3W power. The design enhances the illuminated area, providing a more prominent and effective warning signal. Enhanced Durability Built to withstand tough conditions, this turn signal light offers long-lasting performance and reliable visibility in various environments. Note Depending on the vehicle, additional LED turn signal relays or resistors may be required to ensure the correct flashing frequency..

ULTRA-BRIGHT LED BIKE TAIL LIGHT The bicycle tail light feature 32 bright SMD LED lights, with a maximum of 120 Lumens to provide excellent lighting. It's a perfect rear bike light for night riding. The bicycle turn signals have an IPX4 waterproof rating, enabling them to withstand any adverse weather conditions, thereby guaranteeing safety during long-distance rides in rainy and foggy environments. REMOTE CONTROL AND 5 MODE OPTIONS This bike tail light with turn signals has 5 light modes for your choice, with a remote control that can be switched to the left turn signal light, right turn signal light, red light always on, red light flashing, and all flashing. You can change different modes according to your demands and occasions the bicycle tail light beeps at 120 dB when you turn left or right, which can better attract the attention of other cyclists and enhance mutual riding safety. BIKE TAIL LIGHT RECHARGEABLE This bike rear light features a built-in 900 mAh rechargeable battery with strong endurance. It is equipped with two USB charging cables, so you don't need to worry about running out of battery. After charging for 3 hours, it can be used for 8 hours. The accompanying remote control boasts an innovative rechargeable design, eliminating the hassle and inconvenience of frequent battery replacements. This adds more convenience to your cycling journey. HIGH VISIBILITY REFLECTIVE TAPE The night reflective tape consists of numerous tiny reflectors, providing large wide-angle reflection. They are waterproof, resistant to scratches and wear, and can be used easily for a long time. These decals offer excellent visibility during nighttime and low-light conditions for helmets, mailboxes, fences, backpacks and clothing. Reflective stickers are also suitable for many types of vehicles, such as cars, trucks, scooters, motorcycles, and bicycles, etc. EASY TO INSTALL USE The bike turn signals install quickly without any tools. The silicone mount strap for the taillight is designed with openings that can tightly fit around most handlebars and seat posts of various sizes, ensuring optimal stability and performance during your rides. Additionally, the bike tail light is compact in size, making it easy to install on your bicycle, backpack, or anywhere else you can imagine. It's an ideal gift for family members or bike enthusiasts.

Flowing Sequential LED Turn Signals Amber Color and Flowing Mode, Cool Design, Perfit Fit For Turn Signal and Indicators Usage. Signals Flow Like Water, Completely New Fashion and Easy to Recognize.. High Quality Motorcycle LED Turn Signals with High Strength, Fexible Rubber to Effectively Prevent Accidental Falls, 12 Pieces of 2835 SMD LEDs with High Brightness, Low Light Decay, Stable Performance, Long Lifespan, Operate with Low Heat Generation and Low Power Consumption.. Waterproof and Safety In Bad Weather or Unexpected Rain, You Remain Absolutely Safe. The Sequential Running Light Turn Signal Ensures That You Are Easily Seen, Providing Individual Safety.. Easy to Connect Plug For Most Motorcycles, Quick and Easy Installation Connect Two Wires Positive - Red Negative - Black, Easily Replace the Turn Signals on The Fairing. If The LED Turn Signals Flash Too Quickly or Stay on Continuously After Installation, The Original Relay Must Be Replaced with an LED Relay Afterwards.. Universally Compatible with Most Manufacturers You Can Install the Turn Signals on Most Models with 12V Battery Voltage. For Motorcycles, Mopeds or Quads..

Turn Signal Driving Lights Blinker Indicator Light. InstallationBlack wire for groundRed wire for signal lightsThe third wire for driving lights. 15 LEDs, High Lumens Output and Long Life Span Bulb Type Incandescent. Package Included 1pairs Left Right Turn Signal Lights.. Universal fit for motorcycles, motorbikes scooter Scooter Quad Cruiser Off Road Street Bike Cafe Race and other motorcycles with 10 mm Holes Fairing.

Aerodynamic Bullet Design The sleek bullet-style design reduces wind resistance for more stable riding and adds a classic, stylish look to your motorcycle. It also focuses the light beam for improved visibility and a clearer signal. Wide Compatibility Suitable for most motorcycles, UTVs, ATVs, dirt bikes, ebikes, and mopeds with 12V voltage. Designed for both front and rear turn signals, with a 350mm wire length and M8 screw size for easy installation. High-Quality Construction The CNC aluminum alloy lamp shell provides enhanced waterproofing, impact resistance, heat resistance, and friction resistance. Equipped with a rubber cover and sealed wires to ensure true IP67 waterproof protection. High Brightness LED Featuring turn signal light with 150cd brightness, 12V voltage, and 1.3W power. This design ensures a bright, clear, and effective flashing signal, improving safety on the road. Consistent Illumination If the left and right turn signal lights blink at different speeds, an LED flasher or resistor may be required to ensure consistent illumination on motorcycles with traditional relays. Note Depending on the vehicle, additional LED turn signal relays or resistors may be required to ensure the correct flashing frequency..

Package contains you will receive 4 pieces motorcycle indicators flowing turn signal lights, black shell, amber lights, the number of turn signals is enough to meet your motorcycle's daily using and replacement, you can also send them to your friends, lover, and family member. Ultra-bright brightness mini stalk arrow light motorcycle turn signals lights is very small, with beautiful and charming LED lights It is composed of 14 ultra-high-brightness amber LED lights, which makes it safer to ride motorcycles at night. High efficiency and energy saving 12V DC powered motorcycle LED indicators are better than traditional lighting products in terms of energy saving, with high brightness, low heat generation, low energy consumption, high efficiency, and no filament structure. Convenient to install motorbike LED indicator blinker amber lamp is simple and easy to install, and can be directly fixed with bolts for regular installation It only takes a few minutes to complete the installation, allowing your motorcycle to emit bright lights in the dark. Good compatibility the motorcycle indicators flowing turn signal lights are compatible with a variety of 12 V locomotives, straddle locomotives, motorcycles, electric vehicles, ATVs, off-road motorcycles, cars, etc., practical enough to meet you a plenty of using needs.

3-in-1 Aerodynamic Bullet DesignThe Mini Motorcycle LED Turn Signals boast an aerodynamic bullet-style design that not only reduces wind resistance for more stable riding but also adds a classic and stylish look to your motorcycle. This sleek design focuses the light beam, improving visibility and ensuring clearer signals. The streamlined shape enhances the overall aesthetic appeal while providing practical benefits on the road. With these turn signals, you can enjoy both style and functionality. Wide CompatibilityThese motorcycle turn signals are suitable for most motorcycles, UTVs, ATVs, dirt bikes, ebikes, and mopeds with a 12V voltage. They are designed for both front and rear use, making them versatile for various vehicles. The 350mm wire length and M8 screw size allow for easy installation. Their wide compatibility ensures that you can upgrade your vehicle's signaling system without any hassle. High-Quality ConstructionCrafted from CNC aluminum alloy, the lamp shell of these turn signals offers enhanced waterproofing, impact resistance, heat resistance, and friction resistance. Equipped with a rubber cover and sealed wires, they provide true IP67 waterproof protection. This high-quality construction ensures durability and longevity, even in harsh weather conditions. You can rely on these turn signals to withstand the elements and keep performing reliably. High Brightness Retro LEDFeaturing turn signal lights with 150cd brightness, 12V voltage, and 1.3W power, these LED turn signals deliver a bright, clear, and effective flashing signal. The high brightness improves safety on the road by making your intentions clearly visible to other drivers. With their powerful performance, these turn signals ensure that you can be seen easily, reducing the risk of accidents. Consistent IlluminationIf the left and right turn signal lights blink at different speeds, an LED flasher or resistor may be required to ensure consistent illumination on motorcycles with traditional relays. This feature is important for maintaining proper signaling and avoiding confusion for other road users. By addressing this potential issue, these turn signals provide reliable and uniform flashing, enhancing your riding experience. Note Depending on the vehicle, additional LED turn signal relays or resistors may be required to ensure the correct flashing frequency..

Bright Motorcycle LED Lights These LED motorbike turn signals boast 40 high-power SMD LED beads, outshining traditional halogen bulbs by a significant margin. They deliver intense and steady illumination, seamlessly changing colors, and introducing innovative lighting modes to enhance safety during both day and night rides.. Premium Build Quality Crafted for durability, these vintage-style LED motorcycle turn signals feature a robust CNC aluminum housing that provides exceptional protection for the internal LED chips. The smoked PC lens is meticulously edge-sealed, ensuring effective waterproofing and dust resistance, making these motorcycle blinkers suitable for all weather conditions.. Versatile Functionality With their sleek design, these classic motorcycle lights are perfect for installation on Harley Dyna Softail and other iconic motorcycle models. The switchback LED turn signals offer a wide range of lighting functions, including driving, turning, and braking.. Universal Compatibility Equipped with 10mm Mounting Bolts, these compact LED turn indicators are compatible with a wide range of classic motorcycles, including Honda, Kawasaki, Yamaha, Suzuki, Triumph, Harley Davidson Bobber, Chopper, Sportsters, and more.. Complete Package Each package includes 2 front and 2 rear bullet turn signal lights, catering to various lighting needs. If you have any questions or need assistance, please don't hesitate to contact us..

CompatibilityLED turn signals insertsIt is LED turn signals fits for Harley with 2 bullet style models. For Touring Street Glide,Street Glide Special ,Road Glide ,Road Glide Special,Road King SpecialExcluding CVOLimitedClassicUltra .For Sportster Iron883, iron 1200, SuperLow 72 48,883R 1200T,1200 Low ect.. Compatibility2 inches turn signalsfor Dyna Wide Glide, Street Bob, Low Rider , Fat Bob ect.For Softail Sport Glide,Slim, Low Rider, Fat Boy, Fat Bob,Fat Boy S,Low rider S ect.. Light Performance81 LEDS Extremely BrightSwitchback Design Lighting ,300 brighter than halogen bulbs.Front 1157 blinker available in two color, white for running light, amber for turn signals.Rear lights are red colors.This LED turn signals allows you to be more noticeable.it have a long life and fit the motorcycle system perfectly.. Smoke LensesUpgrade Versions and Excellent Light TransmissionMade of high-quality PC plastic with special protective coating, the signal lights lens cover can protect the turn signal light inside from being damaged by dust, dirt and other factors.Maintaining clear visibility without weakening the turn signals.. Light InstallationPlug-and-play and Integrated handle designThe LED turn signals are plug-and-play on models with front and rear bullet style housings.. Package Contains1 Pair of front 1157 LED turn signals.1 Pair of rear LED turn signals.2 Pair of smoke turn light lenses. All LED turn signals will be tested before they are sent out, but they may be damaged during shipping.. NoteNot Fit 3 14 Some models may be need load resistor decoders or flasher relay to ensure the LED turn signals light up with full power and prevent 1157 LED bulbs from being hyper flashing, warning or any malfunction error code on dashboard..

High Brightness Motorcycle indicators light has 5 LEDs, built-in high-performance 3528 side light beads. Low power consumption and super brightness, ensuring better visibility and safety while riding. Strong and Waterproof Made of premium plastic and metal, high transparency and good wear resistance. IP65 waterproof to withstand various daily use and tough conditions, ensuring these led turn signals can be used for a long time. Cool Appearance Design Led indicators lights are small but exquisitely. Bright amber color light and cool appearance design makes your motorcycle more stylish, high-end and and high-end, attracting more attention. Easy to Install Featuring M8 metal bolt design, these turn signal lights are easy for your installation. Simply require a bolt connection through 2 wires, black is negative, yellow is connected turn signals. Longer cable length 50cm. Universal Fit for most DC 12V motorcycles. Our 4 pcs motorcycle turn signals are suitable for motorbike scooter quad cruiser harley kawasaki suzuki off road, etc. Ideal choice for riders of different styles and preferences.

Compatible with BMW R1200GS R1200R R1250GS R1250R LC ADV F750GS F850GS S1000RR S1000XR G310GS G310R. High brightness LED lamp is used to increase visibility. The inner side of the steering lamp is coated to improve the reflective effect of the steering lamp.. It has passed the compression test and installation test, and perfectly meets the use requirements. -CE Certification , it can still work normally under extreme conditions. Package include one set 2pcs turn light, you will receive 2 pieces motorcycle indicators flowing turn signal lights, black shell, Clear lamp case, Amber lights. Convenient to install motorbike LED indicator blinker is simple and easy to install, Non-destructive installation, original replacement, plug and play. It only takes a few minutes to complete the installation, allowing your motorcycle to emit bright lights in the dark.

This Motorcycle turn signal lights is compatible with most motorcycle models,such as Kawasaki Honda Yamaha Suzuki etc. This LED Motorcycle turn signal lights with high brightness and high recognition characteristics , also clearly visible even in the daytime. This Motorcycle turn signal lights has a transparent and hard ABS plastic shell, which can achieve waterproof and clear steering function in rainy days. Two modes of useDaytime Running Light bright Amber, Turn Signal Light bright Amber as flowing, which can greatly increase your driving safety.. Package include4pcs Motorcycle Turn Signals Lights.

Position on vehicleFront Rear. These turn signals provide an effective and stylish solution for enhancing safety and visibility while riding, perfectly suited for Honda XR650L and XR250L enthusiasts.. Compatibility for Honda XR650L 1993-2020 and for Honda XR250L 1991-1996 models.. Designed for reliable performance, their powerful illumination ensures clear signaling even in tough conditions. Power source 12V 8W. Package includes 2 pair of turn signal lights Left Right. Fitment Notice Ensure compatibility with your motorcycle model before purchasing..

Ultra-Bright Safety LEDs Each turn signal light contains up to 36 super-bright LED beads, ensuring that you are clearly visible both day and night. Whether you're riding through city streets or along country roads, significantly improve your visibility and driving safety.. Unique Flowing Design The 4 pcs unique flowing LED light effect adds a touch of style to your motorcycle, making it not only eye-catching but also effectively conveying turn signals to other drivers. This modern design is both functional and attractive, enhancing the appeal of your vehicle.. IP67 Waterproof With an IP67 waterproof rating, these turn signal lights can withstand rain, snow, and muddy conditions. Made from durable materials, they are built to last and ensure reliable performance under various weather conditions, providing dependable safety for your rides.. Easy Installation Designed for hassle-free installation, these turn signal lights can be replaced in just minutes without special tools or complicated steps. Simply connect the black wire to the negative terminal and the yellow wire to the positive terminal. Compatible with most 12V motorcycles, upgrading your bike has never been easier.. Wide Model Compatibility Equipped with mounting bolts, these turn signal lights are suitable for most 12V motorcycles, scooters, cruisers, Harleys, dirt bikes, etc. Whether for front or rear lights, this product perfectly matches the needs of your beloved bike..

High Brightness Each Turn Signal Has 6 Bright Amber LED for Maximum Visibility, Low Power Consumption, Good Performance. E-Marked Turn Signal Indicator Comes with 4 PCS Fully E-Marked Turn Signal Amber Lights. Light Size 4 x 1.85 x 1.75 cm. Sturdy and Waterproof Made of High Quality ABS Plastic, Very Strong Penetration Contrast in Rainy, Foggy, or Bad Weather Condition. Simple Installation Just Remove the Old Light and Connect the Wire to the New Indicator Light. Universal Fits M6 Motorcycles. Modern Appearance Our Turn Signals Lights Adopt Cool Appearance Design, Makeing Your Car More Grades and Higher Retention Rates for Eye-catching. Bring A New Look for Your Motorcycle. Good Replacement for the Old or Broken One.

PLUG AND PLAY - Easy to install, only 10 minutes required to install. One of the easiest mods you can do to your motorcycle.. FRONT LED TURN SIGNALS - Inside amber LEDs for turn signal,outside white LEDs for running light. FITMENT - All motorcycles with 2 Bullet style front turn signals. Will fit other makes that use 2 turn signals with 1157 bases. Older models may experience hyper flash which can be corrected by installing the load resistors package not including. SUPER BRIGHT - Made with high bright led Chips,300 brighter than brighter than other similar turn lights.. PACKAGE INCLUDED - 2pcs 2 Bullet style front turn signals.

Made of high quality materials, these in-line resistors are durable and can be used for a long time.. Dimensionsapprox. 53 x 9 x 9 mm, VoltageDC 12V, Power 10W.. Bullet connectors for easy installation, fitted to led indicatorsflasherturn signal.. Slows down the flash rate when moving from bulb to LED indicators.. Helps to solve LED related turn signal problems such as hyper flashing, no flashing or burnt out bulb indications..

Super Brightness These motorcycle turn signals lights feature 12PCS 2835 SMD LEDs for ultra-bright amber and white illumination. Low power consumption, 100,000-hour lifespan, and energy-efficient 12V design. Waterproof Durable Built with an aluminum alloy body and PC lens, these LED indicator lights are waterproof, scratch-resistant, and anti-corrosion. The metal bracket prevents oxidation, ensuring durability for all weather conditions. Wide Compatibility Universal 12V LED motorcycle handlebar lights fit most bikes with 22mm handlebars or 10mm thread mounts, including Yamaha, Suzuki, Kawasaki, and Harley models. Please check the model size before purchasing. Easy Installation 3-wire design blacknegative, redturn signal amber, whiterunning light white. Simple plug-and-play setup for quick installation, allowing your motorcycle to shine bright instantly. Package Included 2PCS motorcycle LED turn signal indicator lights. Compact and stylish, ideal for upgrades or replacements on most motorcycles, scooters, dirt bikes, and custom builds.

Universal Compatibility 10mm mounting bolt, used for most DC 12v motorcycle, street racing bike. Compatible with Honda S1000R CBR1000RR, Kawasaki Ninja GSX-R1000, Suzuki GSX-R1000 GSX-R600, Yamaha YZF R1 R6 R6S. Super Bright Equipped with 15pcs SMD high brightness chips per turn signals, brighter than halogen bulb, bright light output makes you more noticeable when driving to increase safety. Recommend adding flasher relay if your blinkers get hyper flash. Flush Mount Easy Installation Plug and play, minor modification may be need for some models to make it fit properly. Come with mounting spacers for perfect fit, Just splice two wires and tighten the nut at the back of the turn signal base. black wire for negative, yellow wire for turn signal lights. Waterproof Made from high quality ABS PC lens, sealed well on the edge, water tight and dustproof, stay illuminated in extremely hot, cold, rainy or snowy days. Great improvement over your old dull blinkers. Package Including 1 pair led motorcycle turn signal light front indicators..

Durable and Brighter Made of high quality ABS plastic material, processed with ultra heat treatment housing, anti-scratch and waterproof. Anti-scratch, no faded with long time usage, protect led bulbs from water or dusty damage without weakening light, prolong life service time.. Flush Mount Installation Plug and play, no modification required. Just splice two wires and tighten the nut at the back of the turn signal base. black wire for negative, yellow wire for turn signal lights.. Compatibility Replacement for Honda CBR600RR 2003-2012, Honda CBR1000RR 2004-2007, Honda CBR 600 F4 1999-2000, Honda CBR600 F4i 2001-2006, Honda CBR900 CBR919, Honda CBR929 2000-2001.. Product Performance Working voltage DC 12V. Light color Amber. Screw thread diameter 10mm. High luminance, low power consumption, long-lasting.. Package Including 1 pair Motorcycle Led Flush Mount Front Turn Signal Light. Please check it carefully to make sure it is what you need..

Compatible with Honda Kawasaki Suzuki ect, General purpose motorcycle model. It is composed of 1 ultra high brightness amber LampBulb , Mini Chrome Bullet Appearance, Compatible with most motorcycle model.. LampBulb chip 1 high quality bright yellow LampBulb. The working voltage 12 volt. Package include 4 motorcycle turn signals. This Motorcycle Turn Signals has the characteristics of high temperature resistance, cold resistance and waterproof. It can be used normally in summer, winter, rainy day.

This Motorcycle Turn Signals has the characteristics of high temperature resistance, cold resistance and waterproof. It can be used normally in summer, winter, rainy day. Equipped with high-quality halogen bulb, it can bring ultra-high brightness.. Made of high-quality ABS case, durable and long-lasting.. This Mini Motorcycle turn signal lights is compatible with most motorcycle model. Package includes 4 motorcycle turn signals.

4 PCS Turn Signal LightsComes with 4 PCS Turn Signal Lights, Suitable for Motorcycle Motorbike Scooter Quad Cruiser Harley Kawasaki Yamaha Suzuki Off Road. Unique Flowing LED Lighting DesignAmber Color and Flowing Mode, Cool Design, Great for Turn Signal and Indicators Usage. Super BrightBuilt-in 315 Side Light Beads, The Brightest Light Beads on the Market. High Flexible Rubber DesignSnakeskin Style Handle, Curved High, Which Can Effectively Prevent Accidental Falls. Easy to InstallPlug Type Red Line is Positive, Black Line is Negative Light Size 11x2.5cm, Cable Length 25cm, Easy Installation, Directly Mount to the Original Turn Signal Light Place.

Product Motorcycle LED Turn Signal Lights. Material Plastic. Light Source LED. Light Color Amber.. Voltage 12V. Weight 83g 2.93oz. Dimensions See product images. Packaging PVC, Pair.. Application Suitable for motorcycles, scooters. Streamlined, One-piece Design. Serves as Turn Signal and Warning Light.. Easy Installation Plug-and-play, no modifications required. Durable LED Bulbs with Long Service Life.. Energy-efficient Low Power Consumption. Bright Illumination for Enhanced Visibility and Safety..

Skull Design Featuring a creative skull motif, these turn signals break from traditional designs. Once installed, they serve as distinctive decorative elements, enhancing your motorcycle's visual identity. Ideal for riders seeking a unique style, they showcase your personal flair.. LED Light Source The indicator light utilizes LED technology for turn signals, delivering high brightness and strong penetration. Even in low-visibility conditions like rain or fog, it enables rear vehicles to quickly identify the motorcycle, significantly enhancing safety during riding.. Waterproof Crafted from ABS material, these motorcycle turn signals boast superior water resistance. Their tightly sealed construction effectively blocks rainwater ingress, preventing short circuits and light failures. Rest assured, harsh weather won't damage your lights.. Compatible Turn Signal Replacement This motorcycle indicator is compatible with 12V systems, allowing direct replacement of original turn signals while retaining indicator functionality. It fits most 10mm screw installation specifications and electrical systems, suitable for both standard motorcycles and select scooter models through simple replacement installation.. Package Specifications You will receive two motorcycle signal lights featuring a skull-shaped design, capable of fully replacing your motorcycle's turn signal set. Dimensions 3.15 x 2.05 x 2.44 . Stem length 2.05 . Compatible with most motorcycle models..

WIDE COMPATIBILITYBenlari 2-inch LED turn signals are designed to fit for Harley-Davidson Dyna, Softail, Sportster, and Touring models Road Glide, Road King, Street Glide, Electra Glide from 1986 to 2024, matching standard 2-inch bullet-style turn signals. 500 SUPER BRIGHTERBenlari 1157 LED turn signals feature 81 ultra-bright SMD LEDs, delivering 500 brighter illumination than halogen bulbs and 32-LED alternatives, enhancing safety in all conditions. 60,000 HOURS LIFESPANBuilt with advanced circuit protection, these turn signals offer low power consumption, efficient cooling, and a 60,000 hour lifespan. 4 HIGHLY TRANSPARENT LENSThe smoked lens covers are made from IP67 waterproof PC material, protecting against dust and water while maintaining crystal-clear light output. SUPER QUICK INSTALLATIONThe wireless all-in-one running brake turn signal light fit for Harley features Plug-and-play setup, offers a hassle-free install in just 3 minutes some models may need a load resistor. PACKAGE INCLUDES 2 front turn signals 2 smoked lens covers not compatible with 3-inch flat-style or 3.25-inch flat-style turn signal.

Ultra Bright Brightness mini stalk arrow light motorcycle turn signals lights is very small, with beautiful LED lights It is composed of 14 ultra high brightness amber LED lights, Each of our turn signal lights housings is made of ABS, which can withstand various adverse weather conditions, which makes it safer to ride motorcycles at night Note please confirm that the size meets your needs before purchasing. Package Contents receive 4 pieces motorcycle indicators flowing turn signal lights, black shell, amber lights, the number of turn signals is enough to meet your motorcycle's daily using and replacement, you can also share them with your friends, lover, and family member. Package Contents receive 4 pieces motorcycle indicators flowing turn signal lights, black shell, amber lights, the number of turn signals is enough to meet your motorcycle's daily using and replacement, you can also share them with your friends, lover, and family member. Convenient to install motorbike LED indicator blinker amber lamp is simple and easy to install and can be directly bolted for general installation It only takes a few minutes to complete the installation, allowing your motorcycle to emit bright lights in the dark. Good compatibility the motorcycle indicators flowing turn signal lights are compatible with a variety of 12 V locomotives, straddle locomotives, motorcycles, electric vehicles, ATVs, off-road motorcycles, cars, etc., practical enough to meet a plenty of using needs.

THREE WIRE, DUAL-INTENSITY - Our lights are so much more than just secondary running lights. Built with a three-foot, three wire cable, and dual-intensity circuitry, these lights function as running lights, turn signals, and hazards.. SAFETY AND PERSONALITY - Safety is all about being seen, and customizing a bike is all about making a statement. Stand out with a set of ridiculously bright amber light strips packed with 15 high-intensity LEDs.. LEAVE THE STRESS BEHIND - IP68 rated and completely silicone sealed, our lights will continue to perform day in and day out, rain or shine, dirt or asphalt.. CLEAN AND LOW - At only 18 thick and 12 wide, our low-profile, hyper-flexible, strip lighting is designed to conform to the lines of your bike and blend seamlessly with your unique looks.. DIRT, TRACK, OR STREET - Truly flexible in design and application, our amber LED strip lights are perfectly suited for any kind of vehicle you can think of. Install them on your bike, your snowmobile, and your truck..

Wide Compatibility 10mm mounting bolt compatible for most DC 12V motorcycles with 10mm frontrear turn signal light.The flowing mode makes the motorcycle more upscale and attracts more attention.. Super Bright 36 LED Lamp Beads Each turn signal light has 36 SMD LEDs built in.when riding at night, oncoming or rear motorcycles can easily notice your direction signal, making your driving safer.. Sequential Amber Lights Compared with ordinary LED motorcycle turn signals, our turn signals have added a sequential flashing function. They light up sequentially from one side to the other when the turn signal is activated, adding a stylish light appearance to your motorcycle.. IP67 Waterproof Resistant - These motorcycle LED turn signal lights are IP67 waterproof design, anti-rust, the housing and studs are super waterproof.. Easy Installation - 2-wire connection Just remove the original turn signal light and install this new light. The yellow wire is the turn signal light and the black wire is the negative pole. The amber light can be installed on the front or rear side as a turn signal light..

Wide Application. Benlari motorcycle LED turn signals with a 8mm10mm mounting hole are fit for most bike models, including fit for Harley Davidson, Softail, Honda Yamaha Suzuki Kawasaki Cruiser Off-Road, Street Bike Cafe Race, and other motorcycles. Safety Circuit Design. The Benlari bullet turn signals feature 48 built-in LED chips and a safety circuit design for overload protection. Upgraded Exterior Design. Improve the design of the grille lampshade, increase the luminous area, reduce the obstruction of light emission, and achieve better luminous effect. Two Matching Methods. The lamp body is made of M8 bolts, and we also provide M10 parts. You can install the corresponding specification bolts according to your own needs. Special Water-Resistant Design. Equipped with a sealing ring for the lamp cover, it is not easy for water to enter and has a waterproof rating of IP65, which is water-resistant and dust-resistant. You need to Know ? Some models may flicker too quickly and require install a load equalizer. Please pay attention to the model and year before purchasing.

Comes with 2 PCS IP68 Waterproof Turn Signal Lights, Suitable for Motorcycle Motorbike Scooter Off Road.. Wire ConnectionBlack wire--Negative,Red wire--Turn signalSequantialyellow.It will maybe need flash relay fix the problem if stock lamp is halogen - Situation like this Turn signals activate but only go to half way on led. Built-in 16LEDS,Bright Visualization In Daytime.. Metal Shell Color Black LED ColorAmber Color. Amber Color and Flowing Mode, Cool Design, Waterproof and Perfit Fit For Turn Signal and Indicators Usage. Improve driving safety performance..

Package of 2PCS Motorbike Scooter Off Road Y Shape Flowing Indicators LEDS Lamps. Only Flowing Water Model. ABS plastic material IP67 waterproof,flexible rubber protect lamp from damage ,effectively flowing indicator prevent accident happen.. Input VoltageDC 12V LED Lamps ModelFlowing Water.. Lamp Size 4.7Inch x 1.2Inch x 1Inch, Cable Length 9.8Inch.. Easy Installation,Black Line is Negative, Red Line is Positive, Directly Mount to the Original Turn Signal Light Replacement..

Super Bright Motorcycle turn signals have 12 LED super bright beads, up to 4782 LM, 3 times brighter than ordinary turn signals, but low energy consumption, not easy to heat. Brighter makes it easier to be detected during daytime and nighttime driving, safer driving. Easy Installation Motorcycle LED turn signals are easy to install, it only takes a few minutes, the red wire connects to the positive terminal, and the black wire connects to the negative terminal. Ensure proper installation for optimal use. Waterproof and Durable KEMIMOTO motorcycle turn signals are IP67 waterproof and durable, which can be used in various bad weather conditions. They're made from lightweight, wear-resistant ABS with a sturdy rubber base to prevent breaks. The copper wires offer strong conductivity and safety, with a long lifespan of up to 30,000 hours. Flowing Design LED motorcycle blinkers feature a unique flowing LED light design for your motorcycle, which is shiny but not harsh. They are Emark24 certified, ensuring compliance and safety. Universal Turn Signal Lights Compatible with most 12V motorcycles using 8mm mounting bolts, featuring a 25mm power cord, package included 2PCS turn signals. Overall length 3.62 in, Thread length 0.79 in, Thread spec M81.25.

Universal Mini LED Turn Signal It can be installed on general 12V motorcycles, applicable to a wide range of vehicles such as Suzuki, Yamaha, Harley, Honda, and Kawasaki. IPX6 waterproof IPX6 waterproof allows you to drive safely in bad weather such as fog and rain. High-brightness LEDs for increased safety This motorcycle turn signals has clear lens with 2 pcs high quality LED chips,12V DC, very good quality and super bright, even it is too bright to see directly by eyes. The light is bright enough to be visible far from 100 meters away. It is visible not only at night,but also in clear sunny daytime. Adopted zinc die-cast. Resistant to shocks, absorbs vibrations while driving, protects chips and prolongs the life of turn signals. In addition, a PC lens is used to improve visibility compared to conventional lenses. Reliable 1 year warranty We provide a one year warranty service from the date of purchase. If you have any problems with the product, please feel free to contact us..

Universal Compatibility8mm mounting bolt, used for most DC 12V motorcycles, ATV, UTV, dirt bike, cruiser Specially compatible with harley street glide softail road glide sportster, honda gl1800 vt600c vt750c2b, kawasaki en500, suzuki m109r, triumph bonneville thunderbird, yamaha roadsta. Mini Size But Super BrightBuilt in 4pcs high power led chips per turn signal light that emit high-intensity lighting output. Mini size but much brighter than halogen bulbs. Greatly improve the visibility on the front side and ground when driving at night. Moreover, your signaling indicators will more easily been noticed by oncoming traffic to increase safety. The better and safer it is for us and other motorists. Stylish Switchback PatternThe front turn signal lights that are featured with white and amber color will illuminate white as daytime running light and switch to amber when turn signal is activated. The rear light is available in amber and red 2-brightness level, which allow you to change from low-intensity running lights to high-intensity brake lights and switch to amber when turn signal is on. Provide a stylish look to your car, making you stand out from the crowd. Easy Instllation and Metal ConstructionTwo installation methods. If your original blinkers' mounting bolt is 8mm, just remove your stock turn signal light and install the new light on where the old one was removed. Or drill an 8mm hole on where you to mount the new turn signals to DIY your motorcycle. Durable metal Construction makes the light last longer. Paskage Including1 Pair front mini size motorcycle led turn signal light 1 pair rear brake tail lights with turn singnals..

FitmentUniversal fit for most motorcycles that have 8mm threaded bolt rear review mirror stem. Mounted under the bottom of clutch perch. Compatible with 1991-2017 Harley Dyna, 1983-2019 Electra Glide, 2010 Fatboy, 1988-2017 Heritage Softail, 2009-2019 Iron 883, 1998-2019 Road Glide, 1994-2019 Road King, 1986-2017 Softail, 1996-2019 Sportster 1200, 1999-2019 Sportster 883, 2006-2019 Street Glide, 1981-1996 Tour Glide, 2001-2019 Honda Goldwing 1800 and Yamaha Triumph Kawasaki. Super BrightBuilt-in 6pcs high-intensity SMD led chips per turn signals, mini size but much brighter than factory halogen bulbs, bright light output makes you noticeable when driving to increase safety. Used as turn signal blinkers or marker lights no both. Switchback and Sequential PatternThe blinkers will illuminate white as day time running lights and switch to sequential amber when turn signals is activated. The amber turn signal lights illuminate from one side to another side sequentially, flash like water flowing. Give you bike a sleek and clear look. Easy installationJust Plug wire into existing wire harness. 3-wire-confuguration, green wire for signal lights, and red wire for running light, black wire connects to negative. Package Including1 pair mini size led motorcycle turn signal handlebar marker light.

Comes with 2 PCS Sequential Amber Turn Signals.. Working Voltage DC12V IP67 Waterproof. Red For Positive,Black For Negative.. ABS material,Good Heat Resistance,Flame Retardant.. Transparent Lampshade,Smoked Black Lampshade.. Easy Installation, Directly Mount to the Original Turn Signal Light Place.Noted it maybe need an LED FLASHER avoid error flash very fast..

Universal Compatibility8mm mounting bolt, the turn signals fit for most DC 12V motorcycles motorbike scooter quad cruiser off road atv and dirt bike. Compatible with BMW Honda Kawasaki Suzuki Triumph Yamaha. Super BrightBuilt in 3pcs high power led chips per turn signal light that emit high-intensity lighting output. much brighter than halogen bulbs. Greatly improve the visibility on the front side and ground when driving at night. Moreover, your signaling indicators will more easily been noticed by oncoming traffic to increase safety. The better and safer it is for us and other motorists. Easy InstllationTwo installation methods. If your original blinkers' mounting bolt is 8mm, just remove your stock turn signals and install the new light on where the old one was removed. Or drill an 8mm hole on where you to mount the new turn signal lights to DIY your motorcycle to make you bike street legal. IP67 WaterproofMade from high quality PC lens and ABS housing, sealed well on the edge, water tight and dustproof, stay illuminated in extremely hot, cold, rainy or snowy days. Ideal replacement for your old dull blinkers. Give your motorcycle a sleek look. Paskage Including4 Pcs front rear motorcycle led turn signal light amber blinkers, worry-free 365 days manufacture warranty, and friendly customer service.

Super bright- These motorcycle led turn signals have 12 335 LED super bright LED beads, low power consumption, high brightness, and not easy to heat up. The motorcycle amber LED indicators are not only suitable for night driving, but also very bright and conspicuous in the daytime.. Waterproof and durable- Motorcycle turn signals has IP67 waterproof rating, which can be used in various bad weather conditions. Flexible rubber connection base is not easy to break, effectively prevent breakage. The wire is made of copper core, strong conductivity is not easy to get hot, high safety. The service life is up to 30000 hours, giving you a better product experience.. Easy to install-Motorcycle turn signals led are suitable for most models and very easy to install. The black wire is the negative pole, the red wire is the positive pole, and can be installed directly on the original indicator. Install the product correctly to achieve the best effect.. Flowing design- The motorcycle indicator is a flowing design, which can better express the direction you need to change, better than the direction warning light.The smooth mounting design can bring you more safety when driving at night.. 100 Satisfaction- This motorcycle turn signal light comes in a set of 2 and fits most 12 V motorcycles. We offer high quality support for this 12 V motorcycle LED indicator. If you have any further questions, please feel free to contact us. We will solve the problem as soon as possible..

Universal Compatibility 8mm mounting bolt, used for most DC 12V motorcycle specially compatible with harley street glide softail road glide sportster, honda gl1800 vt600c vt750c2b, kawasaki en500, suzuki m109r, triumph bonneville thunderbird, yamaha roadstar. Super Bright Equipped with high power SMD LEDs per turn signals, mini size but much brighter than halogen bulbs, bright light output makes you more noticeable when driving to increase safety and give your motorcycle a sleek look. IC controlled, no higher flashing. Waterproof Made of high quality glass lens and painted black metal housing, anti-corrosion and anti-scratch. sealed well on the edge, water tight, stay illuminated in extremely hot, cold, rainy or snow days. Best replacement for old dull indicator. Easy Installation Two installation methods, if your original blinker is with 8mm mounting bolts, just remove your stock turn signal and install the new light on where the old one was removed. Or drill an 8mm hole on where you to mount the new turn signals to DIY your motorcycle. Package Including 1 Pair front mini size led turn signal light, worry-free 180 days manufacture warranty, and friendly customer service.

This Motorcycle turn signals is compatible with most motorcycle models,such as Motorcycle Harley Cruiser Motorbike Scooter Quad Cruise etc. The unique design and ABS plastic make this motorcycle turn signals extremely waterproof and have the characteristics of high-temperature resistance and corrosion resistance. This Motorcycle turn signals is bright, highly recognizable, and clearly visible on the road. It is easy to install.Direct bolt-on with 2 wires connecting,black line connect to negative pole and yellow line connect to positive pole.Two-wire design includes both lead wire for mounting to all surfaces and be cut. Package include4pcs Motorcycle turn signals.