designed to connect a 12 Gbps host bus adapter or RAID controller with SFF-8643 to 4 discrete SATA drives Mini SAS HD to SATA adapter cable provides reliable internal connectivity between a high density RAID controller card and direct attached storage devices with a SATA plug.. 36 pin SFF 8643 connector and 4 x 7 pin SATA connectors provides both 3 Gbps and 6 Gbps compatibility while migrating to a to 12 Gbps storage area network system. HD mini SAS breakout cable designed with acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration.. Before you buy this cable , please make sure the Mini SAS SFF-8643 on your motherboard or RAID Controller. If the Mini SAS SFF-8643 on your backplane, this cable will not work with them. A lifetime warranty is included with this Mini-SAS cable for peace of mind when purchasing..

Internal Mini SAS Cable designed to connect a 12 Gbps host bus adapter or RAID controller with SFF-8643 to 4 discrete SATA drives Mini SAS HD to SATA adapter cable provides reliable internal connectivity between a high density RAID controller card and direct attached storage devices with a SATA plug.. Hybrid High Density SAS to SATA with a 36 pin SFF 8643 connector and 4 x 7 pin SATA connectors provides both 3 Gbps and 6 Gbps compatibility while migrating to a to 12 Gbps storage area network system. HD mini SAS breakout cable designed with acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration.. Before you buy this cable , please make sure the Mini SAS SFF-8643 on your motherboard or RAID Controller. If the Mini SAS SFF-8643 on your backplane, this cable will not work with them. A lifetime warranty is included with this Mini-SAS cable for peace of mind when purchasing..

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector. Leverage hardware raid performance with this SATA multi-lane cable Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters Supports up to 6Gbs data transfer rate per drive. DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management Slim ribbon cables minimize airflow impact in a computer case. Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector. Leverage hardware raid performance with this SATA multi-lane cable Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters Supports up to 6Gbs data transfer rate per drive. DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management Slim ribbon cables minimize airflow impact in a computer case. Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.

HostSFF-8643 Mini Sas Connector. TargetSFF-8482 29 Pin Mini Sas Connector. Meet Sas 3.0 Specification, Up to 12 Gbps. Used with Raid Controller, Workstations, Servers, HDD. 15 Pin SATA Power Supply is Atached to the SFF-8482 Side..

High Density HD Mini SAS SFF-8643 internal cable assemblies are available for SAS 2.1, 6Gbs and SAS 3.0, 12Gbs specification.. SFF-8643 is the new connector uses less PCB real estate and allows higher port density for internal hosts and devices.. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb.. It is used for connecting a SASSATA adapter to a SASSATA backplane.. These new HD Connectors will be used on the SAS 3.0 specification when it is released..

directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation. SFF-8087 36 Pin to SFF-8087 data cable is for mass storage interconnection between a SAS controller and a SASSATA drive enclosure in a workstation or server. Support SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATASAS drive bays. DIY or IT Professional installers are both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs Mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane Ideal component of a professional SAN network. Both side of SFF-8087 cable are include an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connection. 3.3ft100cm MINI SAS 36P- MINI SAS 36P 6G Server Data Cable ,Lifetime warranty and 24hours on line customer service.

Mini SAS 36 SFF-8087 Male Is to Connect the Controller, 4x SATA Is to Connect to the backplane. Length0.5M.

External Mini SAS SFF-8088 cable assembly supporting 6Gbps SAS 2.0 protocol backward compatible with 3Gbps SAS, ideal for high-throughput storage systems. Features AWG30 twinaxial 8-pair wiring with 100 impedance, ensuring high-bandwidth data transfer and minimal signal skew. Designed for data centers, servers, and external storage systems DAS, compatible with both SAS and SATA devices. Meets SFF-8088 industry standards with robust connectors for secure Mini-SAS device connections. 1-meter 3.3ft length suitable for rack-to-rack deployments in RAID arrays and server environments.

SAS 4.0 SFF-8654 4i 38 Pin Host to SATA 7 Pin cables can be used to connect internal devices, such as hard drives with SATA 7-pin connectors and controllers with Slim SAS SFF-8654 4i connectors, suitable for servers, hard drives, computers, and hosts. The SlimSAS 4i 38 Pin adopts serial technology, and SAS connectors allow devices to be connected to the backplane through cables or directly. Achieve higher transmission speed and shorten connection cables. SAS SFF-8654 4i 38Pin cable assembly, SFF-8654 straight through SATA 7-pin. Connector Slim SAS 4i 38pin Connector SATA 7-pin. Application programs for servers, data storage, and workstations. High Speed SFF-8654 to 4 SATA 7 Pin data transfer speed SAS is 24Gbps, PCIe is 8GTs, each channel. SlimSAS is a new interface developed after parallel SCSI interface, which improves the performance, availability, and scalability of storage systems and provides four channel signal transmission according to industry standards.

The cable Length is 1 M3.3 FT. Mini SAS 36 SFF-8087 Male Connect to the HostController, 4x SAS 29 connect to the TargetDevices. Multiple lanes support current speed of up to 6.0 Gbps through a single cable. Point-to-point SCSI makes setting up SCSI easier than ever. Serial Attached SCSI SAS is a high-speed data storage interface designed for high-throughput and fast data access.

High-Speed SAS 6Gbs Connectivity Engineered with dual SFF-8087 male connectors to support SAS 6Gbs and SATA 3.0 protocols, ensuring seamless compatibility with RAID controllers, HBAs, and server backplanes for enterprise storage solutions.. Premium 100 Shielded Twinax Design Built with 100-ohm impedance Twinax copper cables and full EMI shielding, minimizing signal interference and crosstalk for stable data transfers in high-density server environments.. Durable Internal Deployment 0.5-meter 1.6ft short-length cable optimized for clean routing within rack servers, NAS enclosures, or workstations, reducing clutter while supporting 6Gbps bandwidth for SSDsHDDs.. Enterprise-Grade Reliability Tested for 247 operation under heavy workloads, featuring gold-plated contacts and reinforced strain relief for long-term durability in data centers and virtualization clusters.. Cost-Effective 2-Pack Bundle Includes two shielded SFF-8087 cables for multi-drive configurations, offering a budget-friendly solution to connect RAID cards e.g., LSIBroadcom to backplanes or JBOD storage expansions..

High Speed Data TransferOIKWAN Internal Mini SAS SFF-8087 to SFF8643 is a high-speed data storage interface designed for high-throughput and fast data access. Unique design can make for better cable management in some situations, especially in tight spaces.. Wide Compatibility Mini SAS 36 pin port compatible with Raid Cards like Dell R710, Dell R720, Dell T610 server, H200 controller, PERC H700, H310, PE T710, NORCO RPC-4220 , Norco RPC-4224. High Performance Cable with SFF8643 to SFF8643 connector, mini sas line interface, fast and stable connection. Compact design, the cable doesn't take up much space, which promotes efficient office work. Treated by injection molding, this cable looks great and is durable in use.. What You Get You will get 1 x Mini SAS SFF8087 to SFF8643 cable, backed with 36 Months Warranty and lifetime technical service..

The Mini SAS SFF-8643 to 4x SATA Cable SFF-8643 is host are specifically designed to connect 12 Gbps host bus adapters or RAID controllers to SFF-8643 to 4 discrete SATA drives Mini SAS HD to SATA adapter cable provides reliable internal connection between high-density mini SAS controllers and direct attached storage devices with SATA plugs. HD Mini SAS to 4XSATA Cable with a 36 pin SFF 8643 connector and 4 x 7 pin SATA connectors provides both 3 Gbps and 6 Gbps compatibility while migrating to a to 12 Gbps storage area network system. SFF-8643 to SATA SAS cable to SATA forward breakout, SFF-8643 SAS connector for expand storage use, 4 x SATA 7 pin TARGET drive connectors, hd mini SAS to SATA female 7pin data transfer cable easy link serial SCSI controller and the SATA connector. Flexible design of HD mSAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration. This set includes Mini SAS hd to sata cable 1.6FT0.5M 1xPCS. Please ensure that Mini SAS SFF-8643 is present on the motherboard or RAID controller. When using it, do not connect the Mini SAS hd connector SFF-8643 to the backplane, otherwise the cable from SFF-8643 to sata will not work with them.

Please note that this Mini SAS SFF-8643 to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port. Before you buy this cable , please make sure the Mini SAS SFF-8643 on your motherboard or RAID Controller. If the Mini SAS SFF-8643 on your backplane, this cable will not work with them. SFF-8643 the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb. Serial Attached SCSI SAS is a high-speed data storage interface designed for high-throughput and fast data access. Cable Length 3.3ft1M.

External Mini SAS 26Pin SFF-8088 to External Mini SAS 26pin SFF-8088,. It has an external 26-pin SFF-8088 male Mini-SAS plug with release ring on Both ends. Serial Attached SCSI SAS is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA. Mini SAS guarantees performance at 3.0 Gigabits per second. Cable Length 2Meter.

SFF-8643 is the host, connected to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target, attached to the hard drives with SATA ports. The new SFF-8643 connector utilizes less PCB space and enables higher port density for internal hosts and devices. Provides point data transfer speeds up to 6 Gbits. SAS is a high-speed data storage interface designed for high throughput and fast data access. A thicker, higher-purity tinned copper core combined with aluminum foil shielding greatly improves data transmission efficiency and speed while reducing heat loss. Before purchasing this cable, please ensure that the Mini SAS SFF-8643 connector is on your motherboard or RAID Controller. If the Mini SAS SFF-8643 is on your backplane, this cable will not work with it. This cable comes in two versions gray without shrapnelblue with shrapnel and will be shipped randomly. Contact us for any issues.

Seamlessly bridges SAS 3.0 12Gbps and SAS 2.0 6Gbps ecosystems with SFF-8644 to SFF-8088 connectivity, enabling backwardforward compatibility between new-gen HBAs and legacy storage controllers. Auto-negotiates optimal transfer rates from 12Gbps SAS 3.0 to 6Gbps SAS 2.0 without manual configuration, ensuring plug-and-play operation in mixed-speed environments like SANNAS clusters. Certified for Dell PowerEdge, HPE ProLiant servers, LSIBroadcom RAID cards, and JBOD enclosures. Supports SASSATA HDDSSD hot-swap via Mini SAS HD external ports. Shielded twinaxial design with EMI-resistant connectors and 10,000 mating cycles durability. 4-channel aggregation delivers 24Gbps total bandwidth 6Gbps per channel, maximizing throughput for RAID rebuilds, bulk data migration, and real-time backup operations.

Kindly Reminder This cable cannot work with SAS Driver. Internal Mini SAS 36pin SFF-8087 to 4 29pin SFF-8482 connectors with SATA Power. Mini SAS to SAS Cable Mini SAS 36 pin SFF-8087 connect to the controller, 4 x SAS connect to the HDD Hard Disc Driver. 36 Pin to 29 Pin Cable Mini SAS 36 pin is Host, 4 x SAS 29 pin is target, Internal mini Serial Attached SCSI x 4 SFF-8087 to 4 x1 SFF-8482 Serial Attached SCSI controller based fan-out cables. Controller to SATA Disks Connecting a SAS controller SFF-8087 to four SATA disks SFF-8482. Note Due to the iterative updates of hard drives, the hard drive may not be recognized, please use insulating tape to cover the corresponding pins. What You Get 1 x 3.3 FT CableCreation SFF-8087 to SFF-8482 Cable. Backed with 24 Months Warranty and lifetime technical service.

Internal Mini SAS SFF-8643 to 4 29pin SFF-8482 connectors with power connecting a SAS controller SFF-8643 to four SATASAS disks SFF-8482. Please note that Mini SAS SFF-8643 is host, 4 SAS 29 SFF-8482 is target, internal Mini Serial Attached SCSI x4 SFF-8643 to 4 x1 SFF-8482 Serial Attached SCSI controller based fan-out cables. Before you buy this cable, Please make sure the Mini SAS SFF-8643 on your motherboard or RAID controller. If the Mini SAS SFF-8643 on your backplane, this cable will not work with them. Mini SAS SFF-8643 connect to the controller, 4 SAS connect to the HDD hard disc driver. 30-Day return for any reason, 18-month warranty, Lifetime Technical support and friendly customer service.

SFF-8643 HD Mini SAS to SFF-8087 Mini SAS BackplanesAdapters Expander, to provide for 6Gbps connectivity internal to the server between the SASHBA controller and SAS hard drive. This SFF-8643 to SFF-8087 Mini SAS cable is compliant with SAS 2.1 and the latest SAS 3.0 spec, allowing for use of same part numbers when system speeds increase from 6Gbs to 12Gbs. 3M Ribbon Cabling and thinner 30 AWG cable packaging, allowing more efficient routing that drastically improves fan airflow and the internal server chassis temperatures considerably, and simplifies the configuration of storage devices, to decrease mean failure rates on your equipment and ensure longer service life. This internal Mini SAS HD cable is ideal for connecting controller cards to internal SAS and SATA backplanes. Our Mini SAS cables are thoroughly tested to ensure premium quality.

Connects external SFF-8644 26-pin to internal SFF-8643 36-pin with Mini SAS HD technology for flexible storage configurations.. Supports 12Gbps SAS 3.0 bandwidth, ideal for high-throughput RAID systems and enterprise storage arrays.. 100-Ohm impedance-matched cable ensures signal integrity in data centerserver environments 0.5m1.6ft optimal length.. Works with both SAS and SATA drives backward compatible with 6Gbps SAS 2.0SATA III devices.. Supports drive hot-plugging for maintenance without system downtime, compliant with SFF-86438644 standards..

High-Speed Performance Supports 12Gbps per channel for stable, efficient data transfer between SAS controllers and SATA drives.. Wide Compatibility Works with RAID controllers, storage arrays, and enterprise servers requiring Mini SAS HD SFF 8643 to 4 SATA 7Pin connections.. Premium Copper Wire Made with 30AWG copper conductors for low resistance, stable signal transmission, and long-lasting durability.. Optimized Design Features a 10-ohm impedance for enhanced data integrity and reduced signal loss in high-performance systems.. Flexible Length Options Available in 0.5m and 1m black cables, suitable for various server rack installations and cable management needs..

Mini SAS HD SFF-8088 26P to 4x SATA Cable Provides stable and efficient connectivity between servers and storage devices.. 6Gbps Transmission Speed Supports high-speed data transfer per channel for enterprise applications.. Durable 28AWG Wire High-quality copper with 10 Ohm impedance ensures reliable signal transmission.. Flexible Length Options Available in 0.5m, 1m, 2m, and 3m to meet different installation requirements.. Broad Compatibility Works with RAID controllers, SAS cards, and enterprise hard drives..

12Gbps High-Speed Performance This Mini SAS HD SFF-8088 26Pin female to 4X SATA 7P 180 cable supports up to 12Gbps single-channel data rate, ensuring stable and fast data transfer for enterprise-level storage.. Breakout 1 to 4 SATA Connectors Converts one Mini SAS HD 8088 port into four SATA 7Pin connectors, ideal for connecting multiple SSDs or HDDs to RAID controllers or server storage arrays.. 180 Connector Design Features 180-degree SATA female connectors, optimized for secure and stable connections inside compact chassis or dense server racks.. Premium 30AWG Copper Wire Made with 30AWG copper conductors, precision welding, and injection molding craftsmanship, offering excellent conductivity, reduced interference, and long-lasting durability.. Compact 0.5m19.6in Length Short length design makes it perfect for server racks, workstation builds, and data centers that require tidy and reliable high-speed connectivity..

SFF-8643 to 4x SFF-8482 with Power SupportConnects one Mini SAS HD port to four SAS drives SFF-8482, each with integrated power linesideal for internal RAID or JBOD setups.. 12Gbps High-Speed Data TransferSupports up to 12Gbps per channel, optimized for enterprise storage systems requiring fast and stable data throughput.. 30AWG High-Quality ConstructionDurable 30AWG wiring ensures low interference, high signal integrity, and long-term reliability in server environments.. With Power Supply LinesEliminates the need for separate SATAMo lex power cables, simplifying internal cable management and improving airflow.. Flexible Length OptionsOffered in 0.5m and 1m variants to suit different chassis sizes and internal routing configurations..

6Gbps High-Speed Transmission Supports 6Gbps single-channel bandwidth, enabling stable and efficient server-to-storage data transfer.. Mini SAS HD to 4 x SATA Converts SFF-8644 with IC to four SATA 7-pin connectors, suitable for HDDs, SSDs, and enterprise storage applications.. 28AWG Copper Construction Made with UL20276 28AWG copper wire, providing excellent conductivity, reduced resistance, and long-lasting durability.. Tested for Reliability 100 open short tested withstands DC 300V0.01s, with insulation resistance 10M and conductive resistance 2.. Flexible Length Options Available in 0.5m, 1m, 2m, and 3m, ideal for servers, RAID controllers, SSDs, and data center integration..

12Gbps High-Speed Data TransmissionSupports up to 12G single-channel bandwidth, ensuring fast and reliable data access for enterprise-level applications.. 4 SATA 7Pin Male OutputsEnables simultaneous connection of up to 4 SATA drives, ideal for building or expanding internal storage arrays in servers or NAS.. 30AWG Ultra-Flexible Cable DesignBuilt with high-quality 30AWG conductors, the cable is compact and flexible, making it easy to route within tight server chassis.. Stable 10 Ohm Electrical PerformanceOptimized for internal server environments with low impedance 10, offering reduced signal loss and stable data transfer.. Multiple Length OptionsAvailable in 0.1m, 0.3m, and 0.5m lengths to meet various internal layout and cabling requirements for efficient installation..

Professional Server Cable Designed compatible with Mini SAS HD SFF-8644 to SFF-8482 29P, providing reliable high-speed connectivity between array cards and SATA hard drives.. 12G High-Speed Performance Supports 12G single-channel bandwidth, ensuring fast, stable, and interference-resistant data transfer for enterprise storage and servers.. 28AWG Premium Copper Wire Built with 28AWG copper conductor and reinforced injection molding, offering durability, low resistance, and long-lasting reliability.. Flexible Length Options Available in 0.5m 19.7in, 1m 39.4in, 2m 78.7in, 3m 118in to meet different server rack and cable management needs.. Wide Compatibility Ideal for RAID controllers, array cards, SATA SSDHDD drives, and enterprise data centers, supporting Mini SAS 36P to universal 29P connections..

SFF-8087 to 4 SATAMini SAS to SATA cable connects a RAID or PCLE controller with an SFF-8087 to 4 discrete SATA drives. Mini SAS 36 SFF-8087 male is to connect the Controller, 4x SATA is to connect the backplane.. Strong DesignFlexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing The 1.6 foot of SAS to SATA cables provides appropriate length for internal cable management.. High-speed Data TransferSAS cable supports up to 6Gbs data transfer rate per drive.. Convenient to UseThe SAS to SATA cable with P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.. What you get3.3FT Internal Mini SAS SFF-8087 x1, a 12-month warranty and lifetime technical support..

connecting 4x SFF-8482 SAS drives to 1x SFF-8087 SAS controller connection, through a single cable. Provides reliable, high-performance drive and Mini SAS controller connectivity. Supports up to 6Gbps throughput per channel. 4x SFF-8482 connections, each with data and power. 1x SFF-8087 connector.

Product Type Internal Mini SAS to Mini SAS Cable. Wire length 2.5FT75CM. Model M246M 0M246M. Package includes Sata Cable SAS-ASAS-B.. 90 Degree Right Angle As long as the connectors on your backplane are spaced apart so you can attach the 90 degree end to it, especially in tight spaces.. Differentiated Labels These cables are labeled SAS-ASAS-B, so you easily know which cable is which from the DBP to the CTLR. If the connections are crossed, an error code will be displayed.. Compatibility Mini SAS 36 pin port compatible with Raid Cards like Dell R710, Dell R720, Dell T610 server, H200 controller, PERC H700, H310, PE T710, NORCO RPC-4220 , Norco RPC-4224.. Warranty Saihisday SATA cable comes with 1 year limited warranty. Any problem, our customer support team is ready to assist you in 24h..

enables you to connect e.g. a controller with mini SAS 36pin connector SFF 8087 to 4 SAS SFF 8482 HDD.. Hard Disk Fanout Raid cable. Host SFF-8087 connectorbr. Target 4xSFF-8482 SAS connector. With SATA 15pin power connector.

Internal Mini SAS 36Pin SFF-8087 to Mini SAS 36pin SFF-8087 Server Hard Disk Raid Data Cable. Length 70cm. Positive and passive latching ensures that the plug remains mated to receptacle. All internal mini SAS assemblies are capable of supporting SASSATA generation I and II bandwidths. For Controller to Backplane applications.

The High Density HD system referenced as HD Mini-SAS SFF-8643 in the SAS 2.1 standard, meets the 6Gbs SAS specification.. These new HD Connectors will be used on the SAS 3.0 specification when it is released. Cable material may change but the connectors will be the next generation of SAS to run at 12Gbs.. Internal Mini SAS SFF-8643 to to angled 4 SATA 7pin hard disk data Cable. This SAS cable enables you to connect up to 4 SATA drives to a Mini SAS HD SFF-8643 controller.. Host 1 x Mini SAS HD SFF-8643 . Device 4 x SATA 7 pin. 6 Gbs Serial Attached SCSI SAS specification. Data transfer rate up to 6 Gbs.Cable for internal connection Cable length ca. 1 m.

This SAS cable can be used to connect internal devices, e.g. a hard disk with SATA 7pin connector to a controller with Slim SAS SFF-8654 4i connector.. Ultraport SlimSAS 4i 38Pos Cable Assembly. Slim SAS 4i Straight to SATA 7pin. Length 50cm. Connector 1 Slim SAS 4i 38pin. Connector 2 SATA 7pin. Applications for Servers,Data Storage,Workstation. meet PCIe Gen3 and SAS4.0 specification.. 1.Smaller size connector and cable saves device space. 2.Provide four channels signal transmission as per industry standard. 3.Data speed 24Gbps for SAS and 8GTs for PCIe per channel. 4.Meet SAS3.0, Ultraport SlimSAS SFF-8654 specification.

Internal 36 Pin Mini SAS SFF-8087 Host to 4 SFF-8482 Target SAS Hard Disk and SATA Power Cable. enables you to connect e.g. a controller with mini SAS 36pin connector SFF 8087 to 4 SAS SFF 8482 HDD.. Hard Disk Fanout Raid cable. Host SFF-8087 connector . Target SFF-8482 SAS connector. With SATA 15pin power connector .100cm.

1 The SFF-8482 is a connector design for interfacing a connection for SAS drives, both SAS Hard drives and SAS SSD drives.. 2 It can connect the SATA hard disk to SATA motherboard.. 3 It can connect the SAS hard disk to SAS motherboard.. 4 It can't connect the SAS hard disk to normal SATA motherboard. it will be worked if your motherboard has the SAS chipsit, Otherwise can't work.. 5 It can't connect the SATA hard disk to normal SAS motherboard. it will be worked if your hard disk has the SAS chipsit, Otherwise can't work.. 6 This SAS cable to 1x SATA with 10 cm length, enables you to connect a SAS HDD with SFF 8482 port to a SAS compatible SATA controller hybrid controller..

Convert two internal SFF-8643 ports into two external SFF-8644 ports. Compatible with 12Gbps SAS drives backwards compatible with 6 Gbps SAS SATA drives. Connect external SAS or SATA drives to an internal backplane or SAS controller. The dual-port feature also facilitates high-availability solutions by providing redundancy. High and low profile baffles included.

Internal Mini-SAS Copper Cables,Internal Mini SAS SFF-8087 to to 4 SATA 7pin hard disk data Cable,This SAS cable enables you to connect up to 4 SATA drives to a Mini SAS SFF-8087 controller.. Cable with Ultra Slim TPE Jacket build with flex thin cable and tapedesign, Flexible design of breakout cable slim ribbon for strain relief to protect cables without rigidity.. The Angled SATA type Cable Allowing you to connect the cable to a female port, even if space around the port is limited.No more need to twist your cables, so now you have a straight connection to your cable and better quality signal to your device.. Mini-SAS cable configurations,The SAS system referenced as Mini-SAS SFF-8087 in the SAS 2.1 standard, meets the 6Gbs SAS specification.SATA3.0 7pin interfaces, which can be connected to an SSD solid state hard disk as a system disk, and supports transmission rates of 6.0Gbps, 3.0Gbps, 1.5Gbps.. Fully compatible with SATA interface mechanical hard drivesSSD solid state hard drivesoptical drives, etc. Support Windows 781011, Windows Server 2008 R22012 R220162019 Mac OS Linux FreeNAS Synology and various NAS operating systems..

Internal 36 Pin Mini SAS SFF-8087 Host to 4 SFF-8482 Target SAS Hard Disk and SATA Power Cable. enables you to connect e.g. a controller with mini SAS 36pin connector SFF 8087 to 4 SAS SFF 8482 HDD.. Hard Disk Fanout Raid cable Host SFF-8087 connector. Target 4xSFF-8482 SAS connector With SATA 15pin power connector. Length50cm.

Internal Mini SAS SFF-8087Host to 4 SATA 7pin Target Hard Disk 6Gbps Data Server Raid Cable. Mini-SAS cable configurations,The SAS system referenced as Mini-SAS SFF-8087 in the SAS 2.1 standard, meets the 6Gbs SAS specification.. Internal Mini-SAS Copper Cables,Internal Mini SAS SFF-8087 to to 4 SATA 7pin hard disk data Cable. This SAS cable enables you to connect up to 4 SATA drives to a Mini SAS SFF-8087 controller.. Connector Host 1 x Mini SAS SFF-8087 Device 4 x SATA 7 pin.

Using a ASM1806 PCIe bridge elimate the need for a Port Multiper when combining the Dual Marvell 9215 Chipset allowing to reach maximum bandwidth per port.. Compliant with PCI-Ecpress Specification v2.0 and backwards compatible with PCI-E 1.x. Supports Communication Speeds 6.0 Gbps, 3.0 Gbps, 1.5 Gbps. Support Native Command Queue NCQ. Support Hot plug and Hot Swap.. Supports AHCI 1.0 programming interface registers for the SATA controller.

HIGH-SPEED PERFORMANCE Supports 6Gbps bandwidth per channel for reliable data transfer. SECURE CONNECTIONS Features 4 latching SATA connectors for stable and safe use. COST-EFFECTIVE DESIGN Connects 4 SATA drives to a single SFF-8087 backplane Compatible with RAID, HBAs, or JBOD setups, reducing cable clutter and ensuring flexibility. VERSATILE COMPATIBILITY Connect a Mini SAS backplane to a SAS SATA RAID controller or motherboard.

Connect a SAS controller to four SATA drives. 1m Mini SAS to SATA Cable 1 m SFF-8643 to SATA Cable 1 meter SFF-8643 to 4x SATA Cable Internal Mini SAS to SATA. Compatible with 6Gbps SATA drives. Cost-effective replacement cable. Guaranteed reliability with a lifetime warranty.

SATA SAS cable. Serial ATA 150300600. 4-Lane. SATA R to 36 pin 4i Mini MultiLane P. 3.3 ft.

Wide Hardware Compatibility This SFF-8482 to SATA 22-pin adapter is designed for specific server and storage configurations. Sas to sata adapter cable supports connecting SAS hard drives to motherboards equipped with SAS chipsets or hybrid SATASAS controllers. Explicit Usage Limitations Understanding the unidirectional design of this adapter is crucial. Sata connector cannot connect SAS hard drives to standard SATA motherboards lacking SAS chipsets. To use this feature, one of the following conditions must be met First, the motherboard must support SAS second, an external SAS card must be connected third, your SAS hard drive must support SATA mode. Stable Data Transfer This hard drive adapter uses the SFF-8482 interface specification, ensuring reliable signal integrity when used within its compatibility range. Sata to sas adapter supports high-speed data transfer on supported SAS or hybrid controllers, making it suitable for performance-critical environments. Gold-plated contacts and a molded PVC structure minimize signal loss, ensuring stable operation for tasks such as data backup, server upgrades, or storage expansion. Convenient Connectivity Design This adapter features an SFF-8482 SAS male connector and a SATA 22-pin 7-pin data 15-pin power female connector, providing a simplified connection solution. Sata adapter design allows you to directly connect SAS hard drives to the system's internal SATA power and data cables via the adapter, simplifying cable management within server chassis or racks. Rugged and Durable, Versatile Made of durable plastic and equipped with gold-plated copper contacts, this sas to sata adapter is designed for long-term use in chassis environments. Its low-profile design allows for easy installation in standard hard drive bays without interference. It is compatible with 2.5-inch and 3.5-inch hard drives using the SFF-8482 interface.

SFF-8087 Mini-SAS to SFF-8482 SAS drive interface.. The SFF-8087 connector is commonly used on the host side, such as on RAID controllers or motherboards with Mini-SAS ports. The SFF-8482 connector is used on the target side, typically for connecting SAS hard drives.. Connect RAID controllers or HBAs Host Bus Adapters to multiple SAS hard drives.. 4x SFF-8482 with 15-pin power.. Provides reliable, high-performance drive and Mini SAS controller connectivity..

SFF 8087 to 4 sata breakout cable, sas cable to sata, host side internal mini sas 36 pin male connect to motherboard or sas raid controller, SATA breakout cable connect to backplane or 4 HDD, sas to sata adapter provide secure internal connection between sas raid controller to sas driver cable, NOTE Do not connect Mini sas connector SFF 8087 on your backplane, otherwise the mini sas to sata cable will not work with them. Mini-sas to sata, sff-8087 port for connection to sas hba or pcie controller, mini sas 8087 sata with locking latch, internal mini sas to 4 x sata cable providing a reliable internal link between the serial mini sas controller to sata target, sff-8087 sas breakout cable data transfer rate up to 6Gbs per drive. SFF8087 forward breakout cable, 8087 male sas connector for expand storage use, sas to sata cable are labled, simple up your cable management game, mini sas to sata female 7pin data transfer cable easy link serial scsi controller and sata connector. SFF-8087 to 4x sata build with thin sas cable and tapebraid weaved design, length choice mini sas to sata shortsff-8087 breakout 0.5m and long sas breakout cablemini sas to sata 3.3ft, breaided mini sas to 4 sata cable easy to route after installation, the sas to sata cable is the good choice for DIY and professional installers. What you Get Mini sas to sata cable 1.6FT0.5M, 2xPCS mini sas 36pin SFF-8087 male to 4 sata 7pin female cable.

SFF 8087 to 4 sata sas cable to sata, sas host to 4 sata target cable, host side mini sas 36 pin male connect to motherboard or sas controller, SATA breakout cable 90 degree connect to backplane or 4 HDD, sas to sata adapter provide secure internal connection between sas raid controller to sata driver cable, NOTE Do not connecter mini sas connector sff 8087 on your backplane, otherwise the sas sata cable will not work with them. Mini sas to sata, SFF-8087 port for connection to sas hba or pcie controller, mini sas 8087 sata with locking latch, internal mini sas to 4x sata cable providing a reliable internal link between mini sas controller to sata target, 8087 minisas to sata cable data transfer rate up to 6Gbs per drive. SFF8087 forward breakout cable, 8087 male sas connector for expand storage use, sas to sata cable are labled, simple up your cable management game, mini sas to sata female 7 pin data transfer cable easy link serial scsi controller and the sata connector. SFF-8087 to 4x sata right angle cable build with flexible thin sas cable and tapebraid weaved design, length choice mini sas to sata short sff-8087 breakout 0.5 meter and long sas breakout cable mini sas to sata 3.3ft, braided mini sas to 4 sata cable easy to route after installation, it is the good choice for DIY and professional installers. What you get Mini sas to sata cable 90 degree 1.6FT0.5M,1xPCS Mini sas 36 Pin straight SFF-8087 male to 4 sata 90 degree right angle 7Pin female cable.

SAS cable to sata, sas host to 4 sata target cable, host side internal mini sas 36 pin male connected to raid controller or motherboard, 4 SATA breakout cable connect to backplane or 4 HDD, NOTE Do not connect Mini SAS connector SFF 8087 on your backplane, otherwise the sas sff-8087 to 4x sata cable will not work with them. Mini sas to sata, sff-8087 port for connection to sas hba or PCIe controller, mini sas 8087 with locking latch, internal mini sas to 4 x sata cable providing a reliable internal link between mini sas controller to sata target, minisas 8087 to 4x 6g sata cable data transfer rate up to 6Gbs per driver. SFF8087 forward breakout cable, 8087 male sas connector for expand storage use, sas to sata cable ara labled, simpley up your cable management game, mini sas to sata 7pin data transfer cable easy link serial SCSI controller and sata connector. SFF-8087 to 4x sata build with flexible thin sas cable and tapebraid weaved design, length choice mini sas to sata short sff-8087 breakout 0.5 meter and long sas breakout cable mini sas to sata 3.3ft, braided mini sas to 4 sata cable easy to route after installation, the sas to sata cable is the good choice for DIY and professional installer. Waht you get Mini sas to sata cable 1.6ft0.5M, 1xPCS Mini SAS 36Pin SFF-8087 male to 4 SATA 7Pin female cable.

Mini sas 36 sff-8087 to sff-8482 sas forward breakout, internal mini sas 36pin sff-8087 sas connector male connect to sas raid controller or motherboard, 4x sas sff-8483 connectors with sata power connect to backplane or 4 hdd, each sas SFF8482 adapter contain sata 7pin data and data 15pin power adapter, middle SAS NO pin, Note sff-8087 to 4 sff-8482 cable do Not work with SAS Driver, Donot connecter Mini SAS SFF-8087 on your backplane, otherwise the mini sas to sas breakout will not work with them. Mini sas to 4 sas sff-8087 host to sff-8482 target, sas 8087 host connect to sas hba or pcie controller, mini sas 36pin sff-8087 to 4 sff-8482 connectors with sata power port link between the serial scsi controller and the sata disks, need to attach SATA power supply cables for each sas to sata adapter connector, sas 8087 8482 cable data transfer rate up to 6Gbs per drive. SFF-8087 sas breakout cable build with flex thin sas cable and tapebraid design, length choice mini sas to sas with power shortsff 8087 8482 0.5m and long sas breakout cablemini sas to 4x sas 1M, braided sff-8087 to 4 sas cable easy to route after installation, the mini sas to sas 8087 breakout cable is good for professionals and DIY gamers. 8087 breakout cable with power, sff 8087 male sas connector for expand storage use, sas to sas cable are labled, simple up your cable management game, mini sas sff-8087 sff-8482 data transfer cable easy link serial scsi controller and the sassata connector. What you get sff8087 to sas 1.6FT0.5M,1xPCS Internal mini sas 36pin sff-8087 to sas 4x sff-8482 conector with sata power adapter cable.

SFF 8643 to SFF 8482 minisas to sas breakout cable, internal mini sas hd connector male connect to sas controller or motherboard, sas 4 sff-8482 connectors with sata power connect to backplane or 4 hdd, each SAS sff-8482 adapter contain sata 7pin data and sata 15pin power connector, NO middle SAS pins, Note sff-8643 to 4 sff-8482 cable do Not work with SAS Driver, Donot connect sff-8643 on your backplane, otherwise the mini sas hd to sas breakout will not work with them. Mini sas to 4 sas sff-8643 to 4 sff-8482, sas 8643 host connect sas hba or pcie controller, mini sas to sas sff-8643 sas forward breakout link between the serial scsi controller and the sata disks, need to attach sata power cables to each sas to sata adapter connector, sas 8643 8482 cable data transfer rate up to 6Gbs per drive. 8643 breakout cable with power, 8643 male sas connector for expand storage use, sas to sas cable are labled, simple up your cable management game, mini sas sff-8643 sff-8482 data transfer cable easy link serial SCSI controller and the SASSATA connector. SFF-8643 sas breakout cable build with thin sas cable and tapebraid weaved design,durable material, the outermost layer of the SAS raw cable is wrapped in an aluminum foil for shielding and mylar covered, nylony braid weaved enhances durability and longevity, Length choice mini sas to sas with power shortsff 8643 8482 0.5m and long sas breakout cable8643 4sas 1m, braided sff-8643 to 4 sas cable easy to route after installation, the sff-8643 to sas cable is good choice for DIY and professional installers. What you get sff8643 to sas 1.6FT0.5M,1xPCS sff-8643 internal mini sas hd to 4 sas sff-8482 with sata power adapter cable.

SATA Cables, 4pcsset SATA Straight to 90 Degree SATA Data cable, Half Sleeved 6gb SATA 3 cable connect to motherboards and host controllers to internal cd writer, SASSATA hard drives, bitcoin computer and hdd ssd cd driver, DVD drives, Note this sata cables are SATA data cable only, does not provide power for your hard drive, Drive must be powered separately. Serial ata cableSAS cable Surport up to 6Gbps Data transfer rates, quickly upgrading your computer for expanded storage, backwards compatible with SATA I and SATA II hard drives. the flexible sata cable bundle data transfer speed is limited by rating of the attached equipment. SATA Straight angle Female to SATA Right angle Female SATA cord design, build with durable material,12G high speed SAS thin sata cables, the outermost layer of the SAS raw cable is wrapped in an aluminum foil for shielding and mylar covered for better signal performance,nylon braided put all 4 pcs sata cables together,make for better cable management in tight space, P1 to P4 cable are labeled for easy to route for different SATA systems or for RAID configuration,locking latch design ensuring for a secure connection, preventing looseness and keep signal transfer performance, enhances durability and longevity. Support all popular SATA equipped device in market with SATA HDD, SSD,CD Writer, CD Driver. Widely Compatible with 2.5 SSDs, 3.5 HDDs, optical drives, RAID controllers, embedded computers and controllers, aslo work as replacement for Bitcoin computer,Do not need any software installation. What You Get Include long sata cables 1M3.3FT 4 Pcsset SATA Straight Feamle to 90 Degree Female SATA 7Pin data cable.

SFF-8643 to sata sas cable to sata, sas host to 4 sata target cable, host side internal hd mini sas male connect to sasraid controller or motherboard, sata breakout cable connect to backplane or 4 HDD, SAS to SATA adapter 8643 provide secure internal connection between sas raid controller to sata driver cable, NOTE Do not connecter Mini sas hd sff 8643 on your backplane, otherwise the sff-8643 to sata cable will not work with them. Mini-sas to sata, sas connector sff 8643 port connect to 12 gbps sas hba or raid controller, mini sas sff-8643 sata with locking latch, hd sas sff-8643 to 4 sata cable providing a reliable internal link between a high density mini sas controller to sata target, SFF-8643 to 4x sata cable data transfer rate up to 6Gbs per drive. SAS fan out cable sff-8643 to sata forward breakout, 8643 sas connector for expand storage use, mini sas hd breakout are labled, simple up your cable management game, hd mini sas to sata female 7pin data transfer cable easy link serial SCSI controller and the SATA connector. Sff-8643 to 4x sata build with thin sas cable and tapebraid weaved design, Length choice mini sas to sata short sff-8643 to sata 0.5m and long sas breakout cable mini sas to sata 3.3ftsff8643 sata 1m, braided 8643 satasff8643 sata easy to route after installation, 8643 breakout sas to sata cable is good for professionals and DIY gamers. The package include Mini sas hd to sata cable 1.6FT0.5M 1xPCS sff-8643 sas to 4x sata 7 Pin straight female cable.

This is a SFF-8644 to 4 X SATA 3.3 FT cable. It is designed for the following use the SFF8644 HD Mini SAS 36 Pin at the Host-end HBA Card, and the 4 X SATA fan-out at Target-end such as SSD or HDD. Universal Compatibility the Mini SAS SFF 8644 to 4 sata cable compatible for all hard drives with sata port. Specifications Data Rate UP to 6 GBs SAS 2.1 Compliant SAS 2.1 Compliant. The woven mesh sheath with locking connector latches provides minimized impact on airflow in a computer case, leading to efficient performance. Built to CineRAID's standard, this is capable of 247 use. CableCreation provides 24 Months of replacement for defective products and any-time Technical support.

Smaller size connector and cable saves device space.. Provide four channels signal transmission as per industry standard. Data speed 24Gbps for SAS and 8GTs for PCIe per channel. Meet SAS3.0, Ultraport SlimSAS SFF-8654 specification.

Internal HD Mini SAS cable is specifically designed to connect a 12 Gbps host bus adapter or RAID controller with SFF-8643 to 4 discrete SATA drives Mini SAS HD to SATA adapter cable provides reliable internal connectivity between a high density RAID controller card and direct attached storage devices with a SATA plug. Hybrid high density SAS to SATA with a 36 pin SFF 8643 connector and 4 x 7 pin SATA connectors provides both 3 Gbps and 6 Gbps compatibility while migrating to a to 12 Gbps storage area network system. Forward fan-out cable has an internal SFF-8643 HOST HD Mini-SAS 36 pin connector and 4 x SATA 7 pin TARGET drive connectors Four discrete SATA fanout drive cables are of equal length with stainless steel latches to provide a secure connection. Multi-lane 8643 to SATA CABLE with 4 channels can drive 4 SATA drives Supports multiple lanes of high speed SATA traffic over a single cable SFF 8643 compatible with the Adaptec RAID 71605 7895 Storage Controllers. Flexible design of HD mSAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration.

Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector. Leverage hardware raid performance with this SATA multi-lane cable Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters Supports up to 6Gbs data transfer rate per drive. DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management Slim ribbon cables minimize airflow impact in a computer case. Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection.

Internal 4x SATA to Mini SAS date cable connects a motherboard or RAID controller with 7 pin SATA ports to a SAS backplane or SAS expander with a Mini-SAS port Reverse breakout cable provides reliable internal connectivity between a Mini-SAS drive cage and a SATA motherboard or RAID card. Reverse fanout cable has an SFF-8087 TARGET Mini-SAS connector and 4 x SATA 7 pin HOST drive connectors 4 x discrete SATA drive cables are of equal length with latches to provide a secure connection. Leverage RAID controller performance with this multi-lane cable that connects unused RAID controller SATA ports to a single SFF 8087 Mini SAS backplane port Supports up to 6 Gbps data transfer rate per drive. Flexible design of SATA to SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity Woven mesh sheath covers half of the cable for easy routing P1 to P4 markers provide easy ID after installation Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnections. DIY or pro installers both appreciate a multilane cable that provides high performance SATA controller to SAS backplane connectivity Slim ribbon cables minimize airflow impact in a computer case.

This Mini SAS SFF-8643 to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port. Before you buy this cable , please make sure the Mini SAS SFF-8643 on your motherboard or RAID Controller. If the Mini SAS SFF-8643 on your backplane, this cable will not work with them. SFF-8643 the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb. Serial Attached SCSI SAS is a high-speed data storage interface designed for high-throughput and fast data access. 90-degree design can make for better cable management in some situations, especially in tight spaces.

Mini SAS 36 SFF-8087 Male Connect to the Controller, 4 x SATA Connect to the backplane. Mini SAS 36 SFF-8087 Male is Host, 4 x SATA female is target. Mini SAS 36 SFF-8087 connect to the Controller, 4 Sata connect to 4 HDD. Serial Attached SCSI SAS is a high-speed data storage interface designed for high-throughput and fast data access. Cable Length 1M 3.3FT.

6GBs bandwidth, drain wire tinned copper, 30 AWG. Siig fan-out cable - serial ATA SAS cable -50cm. Sff-8087 36-pin internal mini-sas TO four right angle 7-pin SATA. It offers auto hardware direction control Surge Protection for RS-485 interface. 24 hr dedicated email customer Support, 18 month worry-free Warranty, Lifetime technical support.

6Gbs bandwidth. Drain Wire Tinned Copper, 30 AWG. Latching SATA connector eliminate accidental disconnections. Tape Aluminum mylar hot-melt mylar. It Offers Auto Hardware Direction Control Surge Protection For Rs-485 Interface.

External Mini SAS 26pin soff-8088 to 4x 7pin SATA Female cable,. It has an external 26-pin soff-8088 Male mini-sass Plug with release ring on one end and 4x 7pin SATA on the other.. Serial Attached SCSI SAS is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA. Mini SAS performance at 3.0 gigabits per second. This SAS cable features mini SAS Type soff-8088 connectors and internal SATA connectors. This cable connects a to soff-8088 Mini SAS controller directly to 4 SATA drives.. Cable length 2m, 6.6ft..