Upgraded Shock Mount - Specially designed for MV7 microphone for better shock absorption. No more frustrating post-production editing.. Make The Best Audio - Removing mouse banging and keyboard thumping from recordings. You can record clean audio without the premium investment.. Lightweight Design - Shockmount is lighter weight and smaller, reduce the boom arm'pressure to make your MV7 mic more stable.. Exquisite Design - Rubber mat between the metal bolt and microphone attaches that prevent scratches from your microphone or mount and will bitter cinch down the bolt.. Compatibility - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note Not Included Mic Stand and SM7B Microphone..

Anti vibration and noise - This shock mount mic holder can isolate condenser mics from most physical vibration, floor, and stand noise effectively. And its ideal for recording, podcasting, broadcasting and more. It will make your broadcast or singing voice sound better.. Applicable for many mic types - One shock mount is equipped with 4 different bottom screws, which can compatible with multiple microphone styles, for instance, AT2020, 2020 USB, RodeNT1-A, Procaster, Podcaster, K2, NTK, NT2000, NT2-A, NT1000, SamsonC01, C03, C01U, C03U, CL7, CL8, MXL990, 770, R77, TEMPO, V67G, 2006, AKGP120, P220, P420 , BlueEmber, Bird SL, Babybottle SL, Spark SL except Yeti, Snowball, Nano, Neumann U87 and Scarlett Cm25.. Durable and Adjustable-The shock mount was totally made of Heavy-duty solid metal, except the elastic band and pad. It also came with mounting pads to protect the bottom of the mic. Features an angle adjustable locking knob with a 58 inch screw hole, which can be easily attached to any universal mic boom arm or stand.. NOTE - 1. The shock mount is not compatible with handheld mic, such as SM58, Q2U, ATR2100. 2. Its also not suitable for many USB microphone with function knobs, such as Fifine, Blue YetiSnowball, Razer. The threads diameters which are less than 20mm are not suitable. Many USB microphones bottom threads are 58 inch which is far less than 20 mm. 3. Microphones without threads at the bottom cannot be tightened on our shock mount, such as AT20352050, Heil PR40.. Best service - We promise to provide timely response within 24 hours and lifelong technical guidance..

Professional Shock mount - Specially designed for Blue Yeti and Yeti Pro microphone to reduce vibration. Reduce your audio editing time.Not Applicable to Blue Yeti Nano MicBoom Arm Stand Not Included. Perfect Improve - Shock Mount for Blue Yeti microphone isolates you microphone from noise, shock and vibrations. Like floor tapping, desk bumping, putting down the drink, rolling your chair, adjusting the boom, etc. You can choose this Blue Yeti shock mount for better sound pickup.. Compact Design - It is only half the size of the Blue Radius II III. Shockmount is lighter weight and smaller, more streamlined design. It is quite attractive in your recording studio with a high-tech look.. Boom Arm Capability - Perfectly match the most of boom arm.EX Rode PSA1 Swivel, Rode Scissor, Blue Compass No adapter is required. Specially double-size thread designed to fit US and EU microphone boom arm.. Exquisite Design - Rubber mat between the metal bolt and microphone attaches that prevent scratches from your microphone or mount and will bitter cinch down the bolt.This blue yeti accessories is simple to set up, and it can have a good effect when installed..

Professional Adjustable Microphone StandProfessional Recording Studio Equipment with adjustable microphone stand, Adjustable Shock Mount, double layer Pop Filter , Screw adapter, microphone shock mount, Table mounting clamp with sponge pad. The diameter of ABS plastic microphone shock mount is 1.77''4.5 cm,it can be changed by adjusting the O-rings of shock mount,compatible various mic.Max diameter2.05''5.2 cm.. Strong Compatibility and Applicability microphone arm Luling Arts mic arm could compatible with the Blue Yeti, Snowball or mount most standard-sized microphones. 38'' to 58''Screw adapter are line with industry standards. Adjustable shock mount and universal mic clip also provide more possibilities.Max Support Weight is 70 oz2 kg 4.4 pound.. Upgraded table mounting clampDesigned for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up to 2.16The product is 6 cm to fit most desktop can carry heavy microphone for a long time.. Excellent Shock Mount Effect The diameter of the mic clip can be changed by adjusting O-rings on shock mount, perfect suit for mics with a diameter of more than 4.5cm. The professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise. Take Your Recording and Streaming to the Next Level.. Two-Screen POP Filters The first screen blocks air blasts as any pop filter normally would The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Banish the dreaded hissing and lisping sounds that come when pronouncing the letter S and blocks those ugly plosives that follows B and P.with great customer service, Luling Arts offers 12-month repairreplacement and 30-day hassle-free return..

Applicable for many Neumann mic types - One shock mount is equipped with 2 different bottom screws. The shorter one is applicable for many types of Neumann microphones, such as Neumann U47U67, Neumann TLM102103107, Neumann M147149 and Senheiser MK4MK8. The longer one is specially equipped for Neumann U87.. Anti vibration and noise - This shock mount mic holder can isolate studio condenser mics from most physical vibration, floor, and stand noise effectively. And its ideal for recording, podcasting, broadcasting and more. It will make your broadcast or singing voice sound more pleasant.. Durable and adjustability - The shock mount was totally made of metal, except the elastic band and washer. Heavy-duty solid metal and strong rubber bands, which can be used for a long time. It also came with mounting pads to protect the bottom of the mic plus. Features an angle adjustable locking knob with a 58 inch screw hole, which can be easily attached to any universal mic boom or stand.. Adjustability and flexibility - Features an angle adjustable locking knob with a 58 inch screw hole, which can be easily attached to any universal mic boom or stand.. Best service - There may be a small number of buyers will receive the shock mount which the bottom screws cannot be exactly adapted with your Numann microphone. If this happens,we promise to solve your problem immediately..

Shock mount fit diameter size 45mm-50mm1.8 inch-2 inch microphone, Such as AT2020, AT2020USB, AT2020USB, AT2035, AT4040, ATR2500x, AT4033, AT2050, CAD U37, RE20, MXL440, MXL 500, MXL 4000, MXL V67G, MXL550, Floureon BM700, Floureon BM800, Rode NT1. Shock mount Diameter size 45mm-50mm1.8 inch-2 inch , Compatible with many condenser Microphone. Shock Mount isolates the microphone from noise, shock and vibrations. Like floor tapping, desk bumping, adjusting the boom, etc.. Boom Arm Capability - With a 38-58 screw adapter. Perfectly match the most of boom arm and microphone stands.. Exquisite Design - The shock mounts are framed with an easy pinch-to-open clamp and a nice foam padding.. Great for your YouTube videos, podcasting, online games. Package include Microphone Shock Mount, universal connector adaper..

Custom-developed Mold, 100 FitThis microphone shock mount is specially developed for Blue Yeti microphone, and it can be perfectly matched with the above products.. The Latest Model For 2026Using a custom-designed shock mount for the Yeti microphone and connecting it to a cantilevered stand, the microphone can be isolated from ambient noise, reducing post-production time and delivering a better voice capture result.. User-Friendly DesignWith this customized microphone shock mount, you can better adjust the height and angle of the microphone until it suits you. The microphone shock mount is equipped with a rotary knob for easy adjustment.. Universal Compatibility with Boom Arm StandsThis customized shock mount has a 58 interface and comes with both 38 screws 14screws, making it compatible with most cantilever stands boom arms and desktop stands on the market.. Boost Audio Quality and Reduce Background NoiseEnhance your recordings with the customized Yeti microphone shock mount, protecting your recordings from background noise and improving the sound quality of your game streaming, podcasts, Twitch streams and broadcasts.. Quality ServiceProvide 24-month replacement service and lifetime parts replenishment service..

BROAD COMPATIBILITY Designed to fit microphones 0.7 to 0.9 in diameter, the SM6 is compatible with most popular shotgun mics including the Rode NTG Series, Sennheiser MKE600, and Audio-Technica AT875R. Mounts to cameras as well as tripods and boom poles via 14 thread. ULTRAFLEX TECHNOLOGY Movo's Ultraflex technology uses dual shock absorbers to maximize stability and reduce handling noise. INTEGRATED CABLE MANAGEMENT The SM6's cable track system keeps cables neatly tucked away to ensure a clean and organized setup. USE ANYWHERE Suitable for both outdoor and indoor recording, making it a versatile addition to your audio toolkit. 1-YEAR WARRANTY Weve got your back. Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help.

Universal Compatibility Comprehensive Protection InnoGear mic arm is engineered to seamlessly fit industry-standard 38'' to 58'' screw adapters, which is compatible with Blue Yeti, Snowball, HyperX QuadCast, Fifine AM8 and a wide range of standard-sized microphones. The shock mount not fit for Blue Yeti, crafted from premium materials, features a 52mm hole diameter, slightly larger than standard mounts, and provides enhanced stability and effortless installation.. Heavy-duty Structure Mic Stand The extra strong spring of the boom arm prevents the microphone from accidental dropping, noise generation and shaking. It has a table mounting clamp and protective layers of sponge. An adjustable positioning screw can easily clip to any desktop with a thickness of 2.. Double Screen Pop Filters The first screen blocks air blasts as any pop filter normally would. The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained.. All-in-One Combo Package includes all the items you need for studio recording and live sound, a microphone stand, a zinc alloy table mounting clamp, a 38 to 58 metal screw adapter, a pop filter, a shock mount and five cable ties, easy to assemble and carry.. Especially Design The cable ties which adopt the self-locking fastener design, strong durable powerful lock, easy handling and prevent snagging in tight..

Universal for many mic types - Our professional suspension shock mount is a nice accessory for condenser microphones diameter ranging from 47mm to 53mm, such as AT20202020USB2020USBi2020 xlr2035205025002500USB, AKG P100P200P120P420C3000B, MXL V67gV67i, Rode NT1ANT1, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102 and so on.. Great Design and Well-made - Made of solid metal and elastic band. The mic shock mount features a highly flexible surround design that protects the microphone all-around, which make the microphone more convenient to install and prevent the microphone from falling.. Adjustability and Flexibility - This microphone holder features an angle adjustment with locking knob, so that you can mount it on all the standard microphone stands.. Anti Vibration and Noise - This mic holder can isolate studio condenser mics from most physical vibration, floor, and stand noise effectively, it will make your broadcast or singing voice sounds more pleasant.. Please Note - 1. Package includes a microphone shock mount, a screw adapter and a elastic band. 2. The shock mount only fits mic diameter ranging from 47MM to 53MM. Please verify your microphone size before ordering.

High Elasticity - The AT2020 mic shock mount is made with optimized suspension straps and high elastic winding rope design to protect your mic from vibration, shaking, shock pop and distortion.. Dish-Shaped - The dish-shaped design makes the at2020 mic mount look more pretty and simple, compact and convenient. Microphone shock mounts can be easily angled with an adjustment knob, quick to remove or install.. Two-Tier Design Pop Filter - Pop filter designed with double net layer structure, U-shaped pop wind screen can effectively reduces the plosive, crackles, wind interference, breath sounds from front and both side.. Foam Windscreen Cover - Made of high quality materials to eliminate vibration and filter out those harsh p and t sounds. Having it will make your radio or singing sounds more pleasant.. Cost-Effective - Allowed you to get rid of space consuming audio technica shock mount and easy to carry. Suitable for recordings, podcasts, live broadcasts. 58-38 screw adapter is built in to easily match any universal boom arm or mic stand..

Sturdy Metal The all metal microphone arm stand provides stability and sturdy protection for your podcast microphone whether you're gaming, podcasting, recording or streaming. The microphone is not included. Low Profile The arm stand for gaming can extend from the bottom of your computer screen. The podcast mic stand saves more space in a unobstructing view while in an intense game.. Cable Management The low profile microphone boom stand is equipped with cable managements in hiddenness to organize your microphone cables. Neat arrangement of cable will not cause excessive pulling or resulting in unexpected use, keeping your streaming setup cleaner.. Fully Adjustment Suspension arm stand recording can be extended to 29 inches, suitable for your long large office desktop. The boom arm for microphone can be adjusted up to down by 220 degrees, and horizontally by 360 degrees. More angle adjustments provide more usage options. TipsThe section which near the C-clamp can not be adjusted up to down.. Screw Adapter Coming with three kinds of threads size, 14, 38, 58, the microphone boom arm solves the hassle of choosing additional adapters. You can easily and quickly install and use microphones, shock mounts, cameras, etc with the mic stand in gaming, vocal recording, video creation.. TIPS 1 The desk clamp is suitable for desktop with a thickness of 0.8 to 2.4in. 2 The microphone is not included. 3 The package including, boom arm stand1, desk clamp1, rotatable ball-head1, allen wrench1, users manual1. 4 Two adapters 14'' to 38'' adapter and 38'' to 58'' adapter are already connected on the rotatable ball-head..

Professional Design - Designed for Bluebird SL Large-Diaphragm Condenser Microphone to reduce vibration, save your audio editing time.. Perfect Shockmount - Shock Mount isolates the mic from noise, shocks and vibrations. Like floor tapping, desk bumping, putting down the drink, rolling your chair.. Capability - It fit the most of boom arm mic stand Fit 38and 58. The shockmount is made of ABS hard plastic.. Perfect Filter - Bluebird Pop Filter Windscreen makes it more transparent to muffles higher frequencies pop noise. Blocks out plosives, pop, breath and wind noise.. Kindly Reminder - This product does not include bluebird microphone. Only have 1 X Blue Bluebird Shock mount With Windscreen..

Anti Vibration and Noise - This shock mount keep the microphone in place, which can effectively reduce the noise picked up by the mic from moving or banging on the table.And also isolate the microphone from bumps, which can eliminate shock and background noises .. Compatibility - Our professional suspension shock mount is compatible with ATR2100-USB, AT2005-USB, Samson Q2U, Behringer Xm8500, SM58-LC PGA48PGA58 and other condenser microphones between 28mm and 32mm in diameter.. Great design and well-made - The mic shock mount features a highly flexible surround design that protects the microphone all-around, which make the microphone more convenient to install and prevent the microphone from falling.. Material - Heavy-duty solid metal and strong rubber bands for durable and sturdy construction, which can be used for long time.. Adjustability and Flexibility - Features an angle adjustable locking knob and comes with a 58 to 38 screw adapter for easy connection to any universal microphone boom or stand..

Suitable for Mic Types - Our suspension shock mount is a nice accessory for condenser microphones diameter ranging from 43mm to 47mm, such as Blue SparkBluebirdBabybottle, CAD U37U37 USB, MXL V63MV250, Sterling LDCST51SP50. Please verify your microphone size before ordering. Not Suitable for Mic Types - If you use Audio-Technica, Blue YetiSnowballYeti Nano, Samson g track, SM58SM48, ATR2100, Samson q2u, MXL990910V69XM550V67V67GS, Samson C01meteor USBQ2UC01CUW, Neumann TLM103102, Razor Seiren, we don't advise you to buy it.. Anti Vibration and Noise - The mic holder can isolate studio condenser mics from most physical vibration, floor, and stand noise effectively, it will make your broadcast or singing voice sounds more pleasant.. Great Design and Well-made - The main structure is made of aluminum alloy, which improves the grade and extends the service life. The rubber band adopts elastic rope, which can effectively reduce the trill caused by vibration and make the recorded sound more realistic.. Note If you are not satisfied with our products, please contact us, we will try our best to solve the problem and offer timely and reasonable solutions for you..

Extensive Compatibility Camera mic mount 1859 features a four-point suspension to accommodate Shotgun Mic microphone and other cylindrical on-camera microphones measuring 0.59-1.57 15-40mm in diameter. Easy To Use SmallRig microphone mount cold shoe shotgun mount 1859 can be easily angled via the adjustment knob, quickly removed or install. Multiple Functions There is a built-in hot shoe for camera mounting, and a 38-16 thread connection at the base mounts the shock mount to boompoles and universal hand-grips. Related Products Mic suspension shockmount can directly be mounted on the camera by the cold shoe or hot shoe, such as any other camera with a cold shoe Or cage with a cold shoe such as our SMALLRIG 2049 Or top handlegrip SMALLRIG 198419552027 Or shoe adapter such as our SMALLRIG 1960. Package Includes 1x Cold Shoe Adapter 1858 1x Microphone Shock Mount Adapter 4x Silicone Support Bands.

Compatible for Most Microphone - Supports practically all microphones with a diameter of 21-62mm by the four rods such as AT20202020USB2035205025002500USB, AKG P120P420C3000B, RE20RE320, MXL 990770V67iV67g, Rode NT1ANT1, Shure SM58, Samson Q2U, Bluebird, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102TLM103 etc.. Excellent Anti-vibration - Unique shape gives the shockmount specific compliance to the microphone, isolates mic from physical vibration, floor, and stand noise, prevent unwanted movement of the microphone when you are recording.. Made of High-Grade Materials - Give the shockmount an exceptionally wide working temperature of -30deg.C to 60deg.C, far exceeding the range of typical elastic or rubber shockmounts, also prevent the microphone from damage and scratches.. Compatible for Most Screw of Stands - The screw of shockmount is compatible for 38 and 58 thread together,No thread adapter 58 to 38 needed.. Comes with Pop Filter - Package includes pop filter, preventing the dreaded hissing and lisping sounds to make your sound perfect, effectively reduce the plosive, wind interference, saliva spraying..

Custom-developed Mold, 100 FitThis microphone shock mount is specially developed for Blue Yeti Nano microphone, and it can be perfectly matched with the above products.. The Latest Model For 2026Using a custom-designed shock mount for the Yeti Nano microphone and connecting it to a cantilevered stand, the microphone can be isolated from ambient noise, reducing post-production time and delivering a better voice capture result.. User-Friendly DesignWith this customized microphone shock mount, you can better adjust the height and angle of the microphone until it suits you. The microphone shock mount is equipped with a rotary knob for easy adjustment.. Universal Compatibility with Boom Arm StandsThis customized shock mount has a 58 interface and comes with both 38 and 14 screws, making it compatible with most cantilever stands and desktop stands on the market.. Boost Audio Quality and Reduce Background NoiseEnhance your recordings with the customized Nano microphone shock mount, protecting your recordings from background noise and improving the sound quality of your game streaming, podcasts, Twitch streams and broadcasts.. Quality ServiceProvide 24-month replacement service and lifetime parts replenishment service..

CompatibilityThis microphone shock mount Compatible for mic modelsNeumannTLM 102,TLM 103,TLM 107,TLM 49 Set,M147 Tubeand SennhenserMK-4,MK-8.. StabilityMic shock mount can reduce the vibration of the microphone stand during the recording process, and can also reduce the vibration of the singer's foot to beat the rhythm, drums and other musical instruments to the microphone, suitable for daily singing, voice-over, podcasting, Streaming, gaming.. AdjustabilityLocking knob of the shockmount can be adjusted by 180, which is convenient for various pickup directions of the microphone. The 58 to 38 screw adapter is suitable for different sizes of brackets, and can be used with desktop, cantilever, floor brackets, etc.. High-quality metalThe metal frame has good bearing capacity, and the surface is painted, which is resistant to corrosion and not easy to wear. The loop elastic cord is connected to the metal hook of the shock mount, which can effectively reduce the vibrato caused by vibration. With spared bands, you could replace them for long-lasting use.. NoteNot suitable for Neumann U67,U87and U89 condenser microphones. If you have any questions, you can contact us at any time, we will serve you 24 hours a day..

Suspension shock mount mic holder isolates condenser mics from most physical vibration, floor noise. Like floor tapping, desk bumping, adjusting the boom.. Shockmount made of elasticity rope, the plastic shock mount prevents the microphone from falling all-around and makes your AT2020 microphone more convenient to install.. Widely used for Audio Technica AT2020 AT2035 AT4040 AT2020USB ATR2500x condenser mic.. The angle-adjustable 38 to 58 screw adapter is easily attached to any universal mic boom arm or mic stand.. Fits microphone diameter ranging from 1.9 to 20. 47mm-51mm. Package 1 x Shock Mount..

The heavy-duty elastic bands suspend the mic in the shock mount center for isolation from noise, shock, and vibrations.. Designed to help prevent vibrations and noise through a mic stand, or boompole from reaching suspension shockmount.. Rubber mat between the metal bolt and microphone attaches that prevent microphone scratches and tighten.. The metal shock mount is designed to compatible with MXL 440, 550, 770, 770X, 910, 920, 990, 990S, 990XL, 992, 2001, 2003A, 2006, 2008, 3000, CR89, R144 HE, R77, R770, V250, V63M, V67, V67G, V67i, V77, V78, V87, MAC SP1, DX-2, Revelation II, TEMPO, USB-006, Genesis HE, Tempo Surf mic shock mount.. Package content 1 x black metal spider shock mount, 1 x 38 to 58 metal screw adapter, 5 different size bottom metal screws..

SECURE Its four-point silicone suspension ensures the safety of your shotgun microphone and isolates your mic from vibrations and shakes. NOISE FREE Reduces handling and vibration sounds so you'll only be left with crystal clear audio for your interviews, vlogs and other videos. 1-YEAR WARRANTY Weve got your back Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help. EASY TO USE Can be attached to cameras via shoe mount, tripod via 14 thread boompoles with an optional 38 female to 14 male thread adapter. ADJUSTABLE Its rubberized knob allows you to easily adjust your microphone's angle so you can perfectly aim the mic to your source and can accommodate mics measuring 19-25mm 0.74 - 0.86 in diameter.

All-in-one combooProfessional Recording Studio Equipment with adjustable desk microphone stand, Adjustable Shock Mount, double layer Pop Filter , Screw adapter, Microphone clip. All the items of the package can meet your need for live streaming, broadcast, audio recording and more. Rock SolidBILIONE Mic Stand Desktop made a new upgrade to Weighted Base and Metal Rod. The new version all-metal base weighs 1.5lbs, measures 5.1inches 13cm in diameter, and has 3 anti-slip pads on the bottom to avoid noise when movingYou can also remove pads to keep the base from shaking easily when using heavier microphones.. As well We thickened the diameter of the metal rod to 0.74inches to easily support heavy microphones without falling over.. Two-Screen POP FiltersThe first screen blocks air blasts as any pop filter normally would The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Banish the dreaded hissing and lisping sounds that come when pronouncing the letter S and blocks those scary plosives that follows B and P. Excellent Shock Mount EffectPlease noted the shock mount is not fit for Blue Yeti. It can protect your microphone all-around with high elasticity wrap roping desigh and reduce vibrations from traveling into the microphone. Suitable for mikes with a diameter of more than 1.774.5 cm, and Max diameter2.055.2 cm. Strong Compatibility and ApplicabilityPackage includes 38 to 58 adapter, making it compatible with many microphones like Blue Yeti, AT2020, Fifine AM8, AT2035, QuadCast, Sm58, Seiren X etc. Adjustable shock mount and universal mic clip also provide more possibilities.

AT2020 Foam Windscreen with Shock Mount Specially designed Compatible with Audio-Technica AT2020 line of microphones. AT2020 Windscreen Foam Cover with Shock Mount, by Etour - Mount Made from Quality Materials to Eliminate Vibrations - Acoustic Foam Act as a Pop Filter for your Mic.- Filter out those harsh p and t sounds.. Microphone shock mount can attenuate noise, shock and vibration transmitted through mic stands, booms and mounts. Microphone shock mount can be easily angled via the adjustment knob, quickly removed or install and and fit with 38-16 and 58-27 threaded stands. Great for better YouTube videos, podcasting, online games and other audio recordings.

100 Precision Fit for Audio-Technica AT2020 LineThis at2020 shock mount is engineered to match the exact curvature and screw holes of the Audio-Technica AT2020 line including AT2020, AT2035, AT2020USB, ATR2050, AT3035 for zero-gap installation. Unlike universal mic mounts that cause 80 more mic sway, our custom design locks your mic in placeeliminating mechanical noise from loose fittings that ruin recordings.. 60 Less Post-Editing Time with Anti-Vibration SuspensionOur elastic suspension system isolates your AT2020 mic from desk vibrations, floor tapping, and equipment resonancekeeping raw audio clean right out of the box. Whether youre podcasting, streaming, or recording, this anti-vibration shock mount cuts post-adjustment work by 60 so you can focus on creating.. Fits Most Boom Arm Desktop Mic Stands No Extra Adapters NeededThis AT2020 mount comes with a standard 38 to 58 metal adapter 58 interface, seamlessly fitting most boom arms cantilever stands and desktop mic stands on the market. Skip the hassle of hunting for extra partsset up your mic holder in 2 minutes or less.. Pro Metal Pop Filter 80 More PB Noise EliminationDitch flimsy foam filtersour premium steel mesh metal pop filter disperses airflow evenly, blocking 80 of pb explosive noises without distorting vocal quality. Perfect for crystal-clear audio in podcasts, gaming streams, live broadcasts, and home studio recordings.. Professional After-sales ServiceProvide a 24-month replacement service and a lifetime parts supply service. If you run into any issues with fit, function, or parts for your Audio-Technica AT2020 accessory, our support team is here to helpso you can use your gear with total confidence..

Stable Secure Graded material made Mic shock mount can reduce the vibration of the microphone stand during recording process, and can also reduce the vibration of the singer's foot to beat the rhythm, drums and other musical instruments to the microphone.. BLUE YETI SHOCK MOUNT Special designed for Blue Yeti microphones, like Blue Yeti, Blue Yeti Pro, Snowball, Yeti X Blue Yeti Nano Mic14,58 adapter. Reduce your audio editing time and choose our shock mount for better sound pick up.. Exquisite Design Specially double-size thread 38 and 58 design makes our micro holder fit the most the screws of the microphone stands. No thread adapter 58 to 38 needed.. Compact Portable At 5.59X 7.87, 7.3oz. The mount is a compact, lightweight, portable, streamlined design. This portable shock mount is the perfect size for recording professional-quality audio anywhere you go.. Widely Application The professional shock mount is suitable for daily singing, voice-over, podcasting, Streaming, gaming, vlogging, gaming, and is a thoughtful and useful gift for those looking for premium quality sound..

Professional Shockmount - Special design for Samson Q2U USBXLR Dynamic Microphone. Fits perfectly, without the slightest fear of it falling out.. Anti Vibration and Noise - Shock mount keep the mic in place that can effectively absorbing vibrations and noise by the mic from moving or banging on the table.. Adjustability and Flexibility - Comes with a 58 to 38 screw adapter for easy connection to universal microphone boom or stand. e.g. concert to your Rode PSA1 mic stand.. High Quality - Heavy-duty solid metal and strong rubber bands for durable and sturdy construction, which can be used for long time.. Sturdy clip - Clip on the shock mount can hold a fairly heavy dynamic mic to prevent the microphone from falling. 180 Ajustable can adjust the angle as you like..

19-25mm Adjustable Range Firmly holds 19-25mm diameter microphones. By adjusting the knob, it can grip microphones of different sizes firmly. Cold Shoe Holder On the bottom of the holder is a cold shoe, which can be attached directly to cold shoe adapters or to cages integrating a cold shoe mount on the top. Bumps and Noise Reduction It is equipped with soft silicone in the microphone clamp and between the two parts, which absorb bumps and noises when you shoot run-and-gun. Precision Design Compact and low-profile 70.9mm in height. Package Includes Microphone Holder.

Wave shock mount is specially designed to be compatible with Elgato Wave1 and Wave3 microphones.. Microphone shock mount can attenuate noise, shock and vibration transmitted through mic stands, booms and mounts.. Reinforced elastic suspension ensures maximum vibration attenuation. Solid steel chassis provides robust protection against lateral impact.. Wave microphone shock mount can be easily angled via the adjustment knob, quickly removed or install and and fit with 38-16 and 58-27 threaded stands.. Great for better YouTube videos, podcasting, online games and other audio recordings..

Product Compatibility This microphone shockmount is customized for the HyperX Quadcast, HyperX Quadcast S, HyperX Quadcast 2S, and HyperX Quadcast 2 microphones. COMPATIBLE WITH MORE MIC MOUNTS This shockmount features a universal 58 thread design that is compatible with most booms for easy installation. It also has a 38 female to 58 male adapter and a 14 female to 58 male adapter so you can choose the thread size you need.. 2026 Newest Ultra-Durable Custom Built shock mount is designed especially for HyperX Quadcast Microphones, suspension to isolate the mic from noise, shock and ambient vibration, maximum vibration attenuation.. PRODUCT FEATURES This microphone shock mount is designed with multi-position adjustability for precise positioning and angle adjustments according to your needs. Ensure that your microphone is always in the best position for optimal recording.. Elevate your audio recordings with HyperX Quadcast mic custom shock mount to shield your microphone from background noise, improving the sound quality of podcasts, Twitch streaming, voiceovers and broadcasts.

Great Compatibility Our shock mount is compatible with Neumann microphones, like U87 Ai, U89 i,TLM 67, TLM 193, TLM 127 and TLM 170.. Adjustability Features an angle adjustable locking knob, the shock-proof stand can be adjusted by 180, which is convenient for various pickup directions of the microphone.And we provide 58-38 adaptor, which can be easily connected to any microphone boom or stand.. Sturdy Durable Completely constructed of solid metal with painted surface for sturdy bearing capacity and wear-resistant.The loop elastic cord is connected to the metal hook at the bottom of the microphone, which can effectively reduce the vibrato caused by vibration.. Anti-Vibration This mic holder is designed for mounting recording Neumann condenser microphones for the purpose of isolating or reducing the physical vibration, floor, and stand noise effectively. It is ideal for recording, podcasting, It will make the recording effect more appropriate, and have a better experience.. Note NOT COMPATIBLE with some Neumann mics, U67, U87 and U89 condenser microphones. If you have any questions, you can contact us at any time, we will serve you 24 hours a day..

Anti-Vibration This mic holder is designed for mounting recording condenser microphones for the purpose of isolating or reducing the physical vibration, floor, and stand noise effectively. It is ideal for recording, podcasting, It will make the recording effect more appropriate, and have a better experience.. Great Compatibility With a diameter of 21-62mm 0.8-2.4inches by 4 rods,our shock mount supports many microphones, like AT20202020USB2035205025002500USB, AKG P120P420C3000B, RE20RE320, MXL 990770V67iV67g, Rode NT1ANT1, Shure SM58, Samson Q2U, Bluebird, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102TLM103 etc.. Adjustability Features an angle adjustable locking knob, the shock-proof stand can be adjusted by 180, which is convenient for various pickup directions of the microphone. And we provide 58-38 adaptor, which can be easily connected to any microphone boom or stand. And the gear on the pop filter allows you to adjust its height while using it.. Sturdy Durable Premium quality materials make shock-proof stand and microphone filter long-lasting and durable. The pop filter features a u-shaped double net layer. It wont break or crack even after it drops or falls.. Note NOT FIT microphone with a diameter more than 60mm, like Blue Yeti, Samson G-Track, etc. If you have any questions, you can contact us at any time, we will serve you 24 hours a day..

Professional Shockmount - Specially designed for MV7 USB Podcast Microphone to reduce vibrations. Saving your audio editing time.Boom Arm Stand Not Included. Perfect Improve - Shock Mount isolates the MV7 microphone from buzzing noise vibrations. Like floor tapping, desk bumping, rolling your chair, adjusting the boom, tap your feet on your desk etc.. Boom Arm Capability - Perfectly match the most of boom arm. No adapter is required. Specially double-size thread designed to fit US and EU microphone boom arm.. Compact Design - Shockmount is lighter weight and smaller, more streamlined design. It is quite attractive in your recording studio with a high-tech look.. Exquisite Design - Rubber mat between the metal bolt and microphone attaches that prevent scratches from your microphone or mount and will bitter cinch down the bolt..

100 Fits Blue YetiThis microphone shock mount is precision-engineered for Blue Yeti. The blue yeti shock mounts inner groove curvature and screw holes perfectly match the blue yeti microphone for zero-gap installation. Compared to universal mounts, it reduces mic sway by 85, eliminating mechanical noise from loose fittings.. 70 Cut in Post EditingThe hybrid metal-plastic frame combines with elastic suspension bands to dampen vibrations from all angles. The elastic suspension system isolates the mic from desk vibrations, floor tapping, and equipment resonance, keeping raw audio clean and reducing post adjustment time.. Fits most Boom Arm Mic StandsThis shock mount for blue yeti equipped with 38 to 58 adapter 58 Interface No extra adapters needed fits seamlessly with most blue yeti boom arm standscantilever stands and desktop blue yeti mic stands.. Pro Filter, 80 pb Noise OutPremium quality acoustic foam pop Filter eliminates most of pb noise interference, for crystal-clear audio in podcasts, gaming streams, live streams and recordings. Support 45 tilt360 swivel adjustment, quickly find the perfect voice pickup angle.. Quality Service24-month replacement service and lifetime parts replenishment..

Anti-Vibration This mic holder is designed for mounting recording condenser microphones for the purpose of isolating or reducing the physical vibration, floor, and stand noise effectively. It is ideal for recording, podcasting, It will make the recording effect more appropriate, and have a better experience.. Great Compatibility Our microphone shock mount is equipped with 4 different bottom screws, which could be compatible with many condenser microphones, like AT2020, 2020USB RodeNT1-A, K2, NTK, NT2000, NT2-A, NT1000 SamsonC01, C03, C01U, C03U, CL7, CL8, BlueBird SL, Babybottle SL, Spark SL, MXL990, 770, R77, TEMPO, V67G, Revelation, 2006 AKGP120, P220, P420 and Neumann U87.. Adjustability Features an angle adjustable locking knob, the shock-proof stand can be adjusted by 180, which is convenient for various pickup directions of the microphone. And we provide 58-38 adaptor, which can be easily connected to any microphone boom or stand.. Sturdy Durable Completely constructed of solid metal with painted surface for sturdy bearing capacity and wear-resistant.The loop elastic cord is connected to the metal hook at the bottom of the microphone, which can effectively reduce the vibrato caused by vibration.. Note NOT COMPATIBLE with handheld live sound mics as SM58Q2U and mics without threads on the bottomas AT20352050. If you have any questions, you can contact us at any time, we will serve you 24 hours a day..

UNIVERSAL DESIGN Will mount and attach to most cameras and recorders via standard hot shoe or tripods via 14 thread. REDUCE VIBRATION - Walk and capture moments without picking up noise with a microphone mount that will reduce shakes and vibrations. UPGRADED DESIGN - the discreet, low-profile design of this portable recorder shock mount helps reduce movement and unnecessary noise. STURDY BUILD Improved Design for stronger build and increased compatibility. DESIGNED IN LOS ANGELES Movo, carries a full assortment of innovative gear for content creators and proudly supports the content creation community..

The heavy-duty elastic bands suspend the mic in the shock mount center for isolation from noise, shock, and vibrations.. Designed to help prevent vibrations and noise through a mic stand, or boompole from reaching suspension shockmount.. Rubber mat between the metal bolt and microphone attaches that prevent microphone scratches and tighten.. The metal shock mount is designed to compatible with AKG P120, P220, P820 mic shock mount.. Package content 1 x black metal spider shock mount, 1 x 38 to 58 metal screw adapter, 5 different size bottom metal screws..

Extensive Compatibility Our shock mount mic hold is suitable for many types condenser microphones, like AT2020, 2020USB, 2020USB-X, 2020USBi, 2035, 2050, 2050 USB, ATR2500X-USB BehringerC-1,C-1U,C-3,BM-1,BM1-U, NeumannU67ai, U87ai, TLM67, TLM193, TLM127 sEsE2200, sE2300 RodeNT1 5th Generation, NT1-A, NT1, Broadcaster Warm AudioWA-CX12, WA-67, WA-47 Jr, WA-87 R2 Black, WA-47 Jr Black TelefunkenELA M 251E MXL440, Tempo WR, Tempo SK, Tempo KR Unversial AudioSphere DLX, Sphere LX, Bock 251 beyerdynamicM 70 PRO X, M 90 PRO X and SterlingST151, ST155, ST159, ST169, etc.. Adjustability Features an angle adjustable locking knob, the shock-proof stand can be adjusted by 180, which is convenient for various pickup directions of the microphone. And we provide a 58-38screw adaptor, which can be easily connected to any microphone boom or stand. And the gear on the pop filter allows you to adjust its height while using it.. Wide Application This shock-proof stand is designed for mounting recording condenser microphones for the purpose of isolating or reducing the physical vibration, floor, and stand noise effectively. It is ideal for recording, podcasting, It will make the recording effect more appropriate, and have a better experience.. Stable Durable Constructed of solid metal with painted surface for sturdy bearing capacity and wear-resistant.The loop elastic cord is connected to the metal hook at the bottom of the microphone, which can effectively reduce the vibrato caused by vibration.And the extra replacement suspension band prolongs its service life.. Note The shock mount only fits mic diameter ranging from 47mm to 53mm. Please verify your microphone size before ordering If you have any questions, you can contact us at any time, we will serve you 24 hours a day..

Professional Shockmount - Specially designed for SM7B Cardioid Dynamic microphone to reduce vibration. Reduce your audio editing time. Boom Arm Stand Not Included. Perfect Improve - Shock Mount isolates the SM 7B microphone from noise, shock, and vibrations. Like floor tapping, desk bumping, putting down the drink, rolling your chair, adjusting the boom, etc.. Compact Design - Shockmount is lighter weight and smaller, more streamlined design. It is quite attractive in your recording studio with a high-tech look.. Boom Arm Capability - Perfectly match most of the boom arm. EX Rode PSA1 Swivel, Rode Scissor, Blue Compass No adapter is required. Specially double-size thread designed to fit US and EU microphone boom arm.. Exquisite Design - Rubber mat between the metal bolt and microphone attaches that prevent scratches from your microphone or mount and will bitterly cinch down the bolt..

High Quality MetalMade of high quality metal and high elasticity rope. high elasticity rope can extend the life of the shock mount. It can protect the microphone all-around with high elasticity wrap roping design, which makes the microphone more convenient to install and prevents the microphone from falling.. Rubber Pad The shock mount 50mm comes with a rubber pad insert, which protects your microphone from damage, fits well and holds the microphone securely in place without falling.. This professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise.It is a very nice shock mount for most large diaphragm condenser microphones.. 180Adjustment KnobThis shock mount features an 180 degree angle adjustment locking knob,Standard 58-27 thread with a 38-58screw adapter,features an angle adjustment with locking knob,so you can mount it on all the standard microphone stands. Weight Capacity 1.32 - 2.2 pounds Not For Blue Yeti. Best service guarantee If you have any questions after receiving the goods, please feel free to contact our customer service. xunlefei's customer service will do its best to help you..

Compatible For Most Screw Of Stands The screw of shockmount is compatible for 38 and 58 thread together,No thread adapter 58 to 38 needed.. Compatible For Most Microphone all microphones with a diameter of 21-62mm by the four rods..

Extensive Compatibility This microphone shock mount Compatible for condenser microphones diameter ranging from 43mm to 48mm, such as MackieEM-91C, EM-91CU, EM-USB CAD U37, U37USB BehringerB-1, B-2 Pro MarantzMPM-1000, MPM-1000U, MPM-500A, MPM-2000 Bluebird LoudEM-91C, EM-91CU, EM-91CU, EM-USB TelefunkenTF11, TF29, TF39, TF51, TF47 MXL2003A, MCA-SP1, V69 , V67G, V63M SterlingST51, SP50 etc.. Adjustability Features an angle adjustable locking knob, the shock-proof stand can be adjusted by 180, which is convenient for various pickup directions of the microphone. And we provide a 58-38screw adaptor, which can be easily connected to any microphone boom or stand. And the gear on the pop filter allows you to adjust its height while using it.. Wide Application This shock-proof stand is designed for mounting recording condenser microphones for the purpose of isolating or reducing the physical vibration, floor, and stand noise effectively. It is ideal for recording, podcasting, It will make the recording effect more appropriate, and have a better experience.. Stable Durable Constructed of solid metal with painted surface for sturdy bearing capacity and wear-resistant.The loop elastic cord is connected to the metal hook at the bottom of the microphone, which can effectively reduce the vibrato caused by vibration.And the extra replacement suspension band prolongs its service life.. Note The shock mount only fits mic diameter ranging from 43mm to 48mm. Please verify your microphone size before ordering If you have any questions, you can contact us at any time, we will serve you 24 hours a day..

Anti-Vibration This mic holder is designed for mounting recording condenser microphones for the purpose of isolating or reducing the physical vibration, floor, and stand noise effectively. It is ideal for recording, podcasting, It will make the recording effect more appropriate, and have a better experience.. Great Compatibility With a diameter of 21-62mm 0.8-2.4inches by 4 rods,our shock mount supports many microphones, like AT20202020USB2035205025002500USB, AKG P120P420C3000B, RE20RE320, MXL 990770V67iV67g, Rode NT1ANT1, Shure SM58, Samson Q2U, Bluebird, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102TLM103 etc.. Adjustability Features an angle adjustable locking knob, the shock-proof stand can be adjusted by 180, which is convenient for various pickup directions of the microphone. And we provide 58-38 adaptor, which can be easily connected to any microphone boom or stand. And the gear on the pop filter allows you to adjust its height while using it.. Sturdy Durable Premium quality materials make shock-proof stand and microphone filter long-lasting and durable. The pop filter features a u-shaped double net layer. It wont break or crack even after it drops or falls.. Note NOT FIT microphone with a diameter more than 60mm, like Blue Yeti, Samson G-Track, etc. If you have any questions, you can contact us at any time, we will serve you 24 hours a day..

Anti-Vibration This mic holder is designed for mounting recording condenser microphones for the purpose of isolating or reducing the physical vibration, floor, and stand noise effectively. It is ideal for recording, podcasting, It will make the recording effect more appropriate, and have a better experience.. Great Compatibility With a diameter of 21-62mm 0.8-2.4inches by 4 rods,our shock mount supports many microphones, like AT20202020USB2035205025002500USB, AKG P120P420C3000B, RE20RE320, MXL 990770V67iV67g, Rode NT1ANT1, Shure SM58, Samson Q2U, Bluebird, Heil PR40, Razer seiren x, Berhinger C-1, ATR 2500 USB, Neumann TLM102TLM103 etc.. Adjustability Features an angle adjustable locking knob, the shock-proof stand can be adjusted by 180, which is convenient for various pickup directions of the microphone. And we provide 58-38 adaptor, which can be easily connected to any microphone boom or stand. And the gear on the pop filter allows you to adjust its height while using it.. Sturdy Durable Premium quality materials make shock-proof stand and microphone filter long-lasting and durable. The pop filter features a u-shaped double net layer. It wont break or crack even after it drops or falls.. Note NOT FIT microphone with a diameter more than 60mm, like Blue Yeti, Samson G-Track, etc. If you have any questions, you can contact us at any time, we will serve you 24 hours a day..

Free Position Mic Arm This professional microphone stand is fully adjustable in all parts with 360 base rotation for 135 back and forth extension, 180 arm shaft for up-and-down movement, and 270 metal adapter to freely position microphones. It can be easily folded and pushed away for space-saving storage when it stands idle and pull it back for usage.. Prolonged Lifetime Unlike other microphone stands that have a knob on the arm shaft getting in the way and causing spring deformation. InnoGear upgraded mic stand has this problem perfectly resolved with a unique design to prolong the life span of the springs and the stand itself.. Solid Heavy-duty High-quality steel material with super-strong springs and extra positioning hole ensures an excellent load-bearing capacity of 3.3lb1.5kg, compared to others of 2.2lb1.0kg. InnoGear boom stand provides effortless and silent microphone positioning, which is vital in live recording situations.. Desk Edge Compatibility The desk clamp is specifically designed to securely grip squared edges up to 2 inches in thickness please ensure your desk edge is flat and not slanted or curved for optimal functionality.. Microphone Compatibility This microphone arm stand allows diversity and compatibility, for it comes with a standard microphone clip to fit for dynamic microphones like Shure SM58, Samson Q2U, Shure PGA48 and more, and a 58 to 38 adapter for HyperX SoloCast 2, HyperX QuadCast 2 S, Razer Seiren V3 Mini, HyperX QuadCast 2, Blue Yeti, Blue Snowball, Blue Snowball iCE, Hyper X QuadCast, SoloCast, Shure SM7B, MV7, Fifine AmpliGame, Fifine K669B Shock mount not included, Fifine AM8, etc..

ADJUSTABLE PLACEMENT The Pyle boom stand features a flexible design for precise mic positioning. Easily adjust the angle, tilt, and extension up to 3.9 ft for optimal recording setups, ideal for both travel and rapid setups.. STURDY TABLE TOP DESIGN Constructed from high-quality steel metal alloy and reinforced with triple bracing for unmatched stability. The universal mounting clamp securely attaches to various surfaces including tables and desks.. OPTIMAL SOUND QUALITY Engineered for excellence, this microphone stand ensures superior sound performance. Its design is perfect for studio recording, podcasting, broadcasting, and more, helping you achieve professional-quality audio.. PROFESSIONAL BUILD Equipped with dual suspension springs and robust metal extension support arms, this stand supports creating clean, professional-sounding vocals and performances unmatched by other stands.. ENHANCED CONNECTIVITY Featuring standard USA 58 inch threading and a universal mic holder mount adapter, it includes a 9.8 ft connector cable with convenient internal cable management, making setup sleek and efficient..

A suspension shock mount for mounting various RODE microphones onto a mic stand or boom pole with 38 or 58 thread. Equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations. Integrated cable management clip. The stand mount is angle adjustable and can be locked into position to ensure sturdy and reliable mic positioning. For shotgun and small-diaphragm condenser microphones.

Aluminum Alloy Microphone Shock Mount Made of aluminum alloy material, it has strong load-bearing capacity and can support large condenser microphones. The stable support structure ensures the stability of the microphone, which can be used for a long time without loosening or falling. Wear-resistant, durable, and non-deformed. It can protect the microphone in all directions.. Shockproof and Noise Reduction The special suspension support structure isolates the microphone from the bracket, and connects to the metal hook with a circular elastic rope, effectively isolating or reducing more than 98 of mechanical vibrations and ground noise. Make your live broadcast or singing sound clearer, which can make the recording effect better and shorten the audio editing time.. Protect Microphone The built-in elastic EVA foam can fit tightly with the microphone and firmly fix it to prevent microphone from scratching, damage and slipping. It can effectively absorb vibration of the bracket and reduce shaking and swinging of the microphone. It can also reduce the friction and collision sound when adjusting microphone angle or moving bracket during recording.. Easy to Use with angle adjustment and locking knobs, it can be adjusted 180 degrees on the stand connector, allowing the microphone to be perfectly aligned with the sound source. It adopts standard 58 - 27 thread and comes with a 38 - 58 metal screw adapter. It can be quickly and easily mounted on all standard microphone stands.. Widely Application Suitable for circular microphones with a diameter of 53mm to 58mm. It can be used in various scenarios, such as live broadcast, recording, broadcasting studio, live broadcast, singing, online conference, dubbing service and recording studio, etc. Its light structure, easy to carry and easy to install, convenient for users to use in different occasions..

What You Will Receive this package comes with 8 pieces black mic clamps in 2 different sizes, if the shock mount you are using is a large one, you can use the larger rubber mic clamps in our package, if the shock mount you are using is small, you can use other small rubber bands, the quantity is sufficient for your different needs. Suitable for Most Types of Shock Mounts our rubber mic clips are suitable for most types of shock mounts, two different sizes can meet your different needs and provide you with more convenience. Can Be Applied for a Long Time these shock mount holder clips are made of quality rubber material, have strong and reliable structure, do not tear or break easily, can serve you for a long time. Size Information the circle elastic bands have 2 different sizes, they are respectively approx. 8.6 cm 3.39 inches and 11.8 cm 4.65 inches, the right sizes can match most types of shock mounts, which can better meet your daily usage. Practical and Easy to Use our package comes with 8 pieces shock mount rubber bands, can better meet your different needs, it is more convenient to replace and cost effective to match the suit.

Effective Shock Absorption Crafted from sturdy iron material, this microphone shock mount significantly reduces vibration and shock noise, enhancing sound clarity for professional recording environments. Secure Microphone Hold The solid construction firmly holds various condenser microphones in place, preventing unwanted movement and ensuring stable performance during use. Universal Compatibility Designed to fit a wide range of microphone stands and desks, this versatile mic shock mount offers flexible installation options suitable for different recording setups. Compact and Lightweight Design Measuring 3.66 by 1.57 by 0.98 inches and weighing only 3.17 ounces, this shock mount is easy to handle and integrates seamlessly into your microphone accessories collection. Tool-Free Installation This microphone shock mount can be quickly set up without additional tools, simplifying the process and saving time during microphone assembly or adjustments.

Miwayer Microphone Sock AbsorberThis Shock Absorber Adopts Advanced Spider Web Shockproof Structure, This Suspension Shock Mount is a nice accessory for condenser microphones diameter ranging from 42mm to 48mm.. Latest spider web shock absorption design It can isolate the physical vibration, floor and shelf noise of most recording studio condenser microphones, and is durable and sturdy. Compared with most microphone stands, this is a very good shock absorber.. Special screws Standard 58-27 thread with a 38-58screw adapter,features an angle adjustment with locking knob,so you can mount it on all the standard microphone stands.. Scenes to be usedIt is very suitable for you to use in the recording studio, recording YouTube videos, podcasts and online games. The package includes a microphone shock mount, universal connector adapter-screw.. Suitable for diameter ranging from 1.6-1.842-47mm perimeter5.2-5.8132-148mm, such as CAD U37U37 USBGXL2400GXL2200 , NW-700 ,NW-88 MXL 7705501000V63MV250 , Sterling LDCST51SP50 , SparkBluebirdBabybottle.

Built-In background Noise Reduction Utilizes a supercardiod pickup microphone to eliminate distracting noises further away from the microphone for professional-grade stream audio. Built-In Shock Mount Dampens vibrations to help protect against bumps for smooth and uninterrupted audio. Zero Latency Monitoring Allows for real-time in-stream monitoring without confusing echos.

USB Output Enables simple setup. USB studio recording microphone kit provides a direct convenient plug-and-play connection to pc and laptop without any additional hardware or drivers for recording vocals, podcasts and Skype. Studio microphone for recording vocals is never been easier to get high-quality sound for your voice and computer-based audio recordings. Incompatible with Xbox and Phones. Excellent Sound Quality With rugged construction for durable performance, the vocal recording microphone, USB condenser mic for PC,offers a wide frequency response and handles high SPLs with ease. Ideal for projecthome-studio applications. The cardioid condenser capsule captures crystal-clear audio from the front and avoid ambient noise when communicatingcreatingrecording. Comes ready to go with a desktop mic boom arm stand and 8.2ft USB cable, you're guaranteed to get great-sounding results.. Durable Arm Set The podcast microphone bundle with versatile and sturdy broadcast suspension boom scissor arm with 180 up and down rotation, 135 forward and backward extension for optimal adjustment, for capturing your voice in podcast or voiceover. The double pop filter attached on the music recording microphone provides two layers of dissipation, removes the rush of air, minimize the popping sounds or cancel noise that can compromise your recording, great for studio as well as home use.. Easy to Attach The streaming microphone for PC includes adjustable boom studio scissor arm stand that features a heavy-duty combo mount consisting of a sturdy C-clamp and a detachable desktop mount. With 13 fixed horizontal arm and offers a 30 reach, the low-profile, table-hugging design of audio recording microphone allows on-air talent to perform without facial obstruction to record in podcasting or make dubbing sounds for videos, use voice chat in Discord or online conference on Zoom or Skype.. The Accessory Package Includes The studio microphone music recording comes with practical accessories for you to use in most of recording. The scissor arm stand is made out of all steel construction, sturdy and durable, a studio-grade shock mount, a double pop filter, premium 8.2' USB cable, a podcast PC gaming microphone, a user manual and friendly Technical Support..

Wide WorkingHigh-grade materials give the shockmount an exceptionally wide range of -30deg.C to 60deg.C, far exceeding the range of typical elastic or rubber shockmounts. Excellent PerformanceUnique shape gives the shockmount specific compliance to the microphone to prevent handling noise. Comes With FilterThis product includes the filter, effectively reduce the plosive, wind interference, saliva spraying.. Compatible For Most Screw Of StandsThe screw of shockmount is compatible for 38 and 58 thread together,No thread adapter 58 to 38 needed.. Compatible For Most MicrophoneSupports practically all microphones with a diameter of 21-62mm by the four rods..

Large-diaphragm cardioid condenser microphone ideal for music production, vocal recording, streaming and podcasting. HF6 1-inch true condenser capsule with a smooth frequency response, high sensitivity and extremely high SPL handling. Exceptionally low noise 4dBA the worlds quietest studio condenser microphone. Studio-grade shock mount, pop filter and premium XLR cable included. Built to the highest standard from premium components in RDEs precision facilities in Sydney, Australia and backed by a 10-year warranty.

Allows permanent installation of a quick-release shock mount for use with a wide variety of gooseneck microphones. Shure Shock-Stopper construction. Reduces the transmission of impact or surface noise by up to 20 db. Country of origin is China.

Compatibility - The shock mount is compatible with any microphone between 28mm and 31mm in diameter. Like Audio Technica AT2005-USB, Behringer XM1800S, Sennheiser E835.. Anti Vibration and Noise - The shockmount keep the mic in place that can effectively absorbing vibrations and noise picked up by the mic from moving or banging on the table.. Adjustability and Flexibility - Comes with a 58 to 38 screw adapter for easy connection to universal microphone boom or stand. e.g. concert to your Rode PSA1 mic stand.. High Quality - Heavy-duty solid metal and strong rubber bands for durable and sturdy construction, which can be used for long time.. Sturdy clip - Clip on the shock mount can hold a fairly heavy dynamic mic to prevent the microphone from falling. 180 Ajustable can adjust the angle as you like..

Professional Shockmount - Special design for Shure SM58-LC, SM58-CN Cardioid Dynamic Vocal Microphone. Fits perfectly, without the slightest fear of it falling out.. Anti Vibration and Noise - Shock mount keep the mic in place that can effectively absorbing vibrations and noise by the mic from moving or banging on the table.. Adjustability and Flexibility - Comes with a 58 to 38 screw adapter for easy connection to universal microphone boom or stand. e.g. concert to your Rode PSA1 mic stand.. High Quality - Heavy-duty solid metal and strong rubber bands for durable and sturdy construction, which can be used for long time.. Sturdy clip - Clip on the shock mount can hold a fairly heavy dynamic mic to prevent the microphone from falling. 180 Ajustable can adjust the angle as you like..

Wide Compatibility Features an elastic inner ring designed for microphones with diameters between 4348mm 1.691.89 inches. Provides a secure and vibration-resistant fit for a variety of microphone models.. Durable Safe Material Made of eco-friendly ABS material that is odorless and free from harmful substances. Includes a thick, high-quality rubber elastic foot that is anti-aging, wear-resista.. Versatile Mounting Options Equipped with a standard convertible interface 38 or M16 internal thread and includes a 58 male to 38 female screw adapter. Compatible with most stands and supports on the market, suitable for both floor and desktop use.. Professional Vibration Isolation Ideal for professional recording environments, effectively reducing vibration noise and preventing impact shock. Ensures clean, clear audio quality.. Compact Convenient Perfect for use with small tripod brackets or desktop setups. Comes complete with 2 universal microphone shockproof stand and the 58 to 38 screw adapter..

2pcs CNC Aluminium Microphone Shock Mount Brackets for BOYA BY-MM1 RODE VideoMicro Movo VXR10 shotgun microphone. Aluminium base better than plastic,very smooth than other brand. A 14 screw at the bottom of the bracket which you can screw on any tripod.. The best partern on shotgun microphone, facebook livestream, Youtube video, interview etc. 1 year limited warranty.If you have any quality problems with the product, please send us a video, we will send you a new one within 48 hours..

This professional suspension shock mount isolates most studio condenser mics from physical vibration, floor, and stand noise.It is a very nice shock mount for most large diaphragm condenser microphones.. Made of high quality metal and high elasticity rope In order to extend the life of the shock mount, Free two ropes. It can protect the microphone all-around with high elasticity wrap roping design, which makes the microphone more convenient to install and prevents the microphone from falling.. Standard 58-27 thread with a 38-58screw adapter,features an angle adjustment with locking knob,so you can mount it on all the standard microphone stands. Weight Capacity 1.32 - 2.2 pounds Not For Blue Yeti. This shock mount has a foam protection wall,which is use to hold and protect microphone.. NOTE The shock mount only fits microphone diameter ranging from 48mm 54mm. PLEASE VERIFY your microphone size BEFORE ORDERING.

All-in-One Package includes all the items you need for studio recording and live sound, microphone stand, phone holder with gooseneck, pop filter, windscreen, shock mount, swivel ball head to attach devices with 14 thread and cable ties.. Upgraded Mic Stand Unlike other microphone stands on the market that having knob gets in the way and causes spring deformation. InnoGear arm stand is upgraded with extended structure to fully protect the spring and get out of the way of the adjusting knob, ensuring long lifetime.. Hands-free Phone Holder Free your hands when podcasting or livestreaming. The phone holder is detachable from the gooseneck and easy to manipulate for desired angle. Both the phone holder and gooseneck are adjustable. The sponges and pads on the phone holder will protect your phone from scratches and keep it staying in.. Bouncy Windscreen Free Angle Pop Filter The high density windscreen protects your mics against wind interference and other noises to achieve clear sound. It is thick and soft enough to lower impact force. The 360 adjustable gooseneck is easy to twist in any directions.. Strong Compatibility Swivel Ball Head It is applicable for devices with 14 threads, like Blue Yeti Nano, Zoom Tascam recorder, webcam, SLR camera and selfie ring light..

Package include Microphone Shock Mount Pop Filter,and come with one free universal connector adaper,Combination with these two making your broadcast or singing voice sounds more pleasant. Perfect with microphone suspension boom scissor arm stand. Pop filterU-shaped double net layer structure, foam layer, metal net layer can effectively reduce the plosive, wind interference, saliva spraying. Shock mountMade of high quality metal and high elasticity rope. It can protect the microphone all-around with high elasticity wrap roping desigh, which make the microphone more convenient to install and prevente the microphone from falling. Shock mount for microphone type Diameter of 46mm-53mm microphone. Outer frame diameter95mm.Height80mm.Not for blue yeti. Please Verify your microphone size before ordering. Pop filter for microphone type Diameter of 41mm-61mm microphone.HLW888mm.

Shock Mount with Pop Filter KitShock mount for most condenser microphones. Package includes all the items you need to get better audio performance results. A microphone shock mount with a pop filter, standard metal screw adapter and extra two rubber ropesas replacement. Owning it will making your broadcast or singing voice sounds more pleasant.. Excellent Mic StandMic shock mounts are made of quality metal and high elasticity wrap roping design, isolates mic from physical vibration, floor, and stand noise, prevent unwanted movement of the microphone when you are recording. The added foam pad to the microphone clamp to all-around prevent the microphone from damage and scratches.. Three Layers Pop FiltersPop filter designed with double net layer structure, foam layer, metal net layer, ''U-shaped'' pop filter can effectively reduces the plosive, pops, crackles, wind interference, breath sounds from front and both side. Helps get your best vocal recordings. It can prevent your microphone from saliva spraying and dust.. Microphone Shock Mount for Universal Mic Boom StandHandy and quick to assemble and disassemble from the microphone by pushing the metal handle, adjust the angle by locking knob. The mic shock mount is a standard 58-27 thread with a 38-58screw adapter can attach to any universal mic boom or stand as you needed. The pop filter firmly fixed on your mic with the combination design of elastic bands and inner rubber ring.. Notes Before PurchasedNote Universal microphone shock mount fits diameter 46mm - 53mm1.85''-2.08'' microphone, the pop filter fits 45mm - 63mm diameter microphones. Please confirm the size of your microphone before ordering. Not Fit AT4040, Blue Yeti, Blue Snowball, Blue yeti nano. We aim to provide top-quality products great customer service. So if youre have some problems with the product after you receive the parcel, don't hesitate to let us know, we are always by your side.