Provides an attachment point for push-button slings. Machined from Mil-Spec anodized aluminum. Beveled edges to reduce snagging Anti-rotation design that prevents swivels from spinning. All hardware necessary for attachment directly to M-LOK Slots is included. No modifications to the M-LOK mounting location is required.

Factory-installed Magpul QDMs constructed of Melonite finished steel for strength and extreme resistance to wear and corrosion. Dedicated two-point sling that can be configured for multiple functions with optional adapters. Secure and rapid length adjustment with MS1 Slider No tails, loops, or other potential snag hazards. Lightweight, yet durable slider and buckle hardware made of reinforced engineering polymer. Proprietary weave, 1-14 wide nylon webbing is strong and abrasion resistant while tubular construction provides anti-chafing user comfort Colored webbing has Near Infrared NIR treatment to reduce IR signature.

Made of lightweight Mil-Spec hard anodized 6061 T-6 aluminum and Injection-molded polymer Aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments quickly and quietly transitions between countless user configurations. Easily loaded with stabilizing forward tension without fear of failure or warping At just over 11 ounces, the Magpul bipod is lighter than many pricier bipods currently on the market. Spring-tension legs stow neatly forward and snap down and lock into place with one hand Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. An industry-exclusive 50 degrees of total tilt and 40 degrees of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.

Push-button quick-detach sling swivel for 1-14 webbing. Manganese-phosphate finished steel. Compatible with QD sling attachment points. Combine with MS1 sling for dedicated two-point sling or with MS1 MS4 adapter. Made in USA.

All-steel, hooded front sight hooded arm speeds sight acquisition while minimizing snagging for cleaner handling.. Corrosion-resistant QPQ finish delivers rugged strength and long-lasting performance with minimal bulk.. Works with the dual-aperture, windage-adjustable MBUS Pro rear to create a diopter-style aperture-within-aperture aiming option toolless elevation adjustment and positive detents maintain standard sight height when deployed.. Two front-post widths available .040 match and .060 standard to suit precision needs the narrower .040 post is compatible with most IR aiming device and light installations.. Low-profile when stowed 1.71 from sight base leading edge to top of hood and built in the USA..

Designed to bring organization to the dusty, dirty, and muddy world we work and play in. At home in hard use applications like tool storage or bulk storage of your reloaded ammunition as well as lighter duties like organizing your personal electronic accessories. 550 paracord with heat shrink tubing for enhanced grip, even with gloves Paint pen dot matrix embossed into body for identification marking. Reinforced polymer fabric with anti-slip texture Welded construction creates permanent impenetrable seals Carabiner attachment points. Small 6 x 9 Medium 7 x 12 Large 9 x 13 X-Large 9.8 x 16.2.

All steel construction Steel, rectangular sight post selectable between Match and Standard widths .040 Match width for increased precision .060 Standard width for maximum visibility. Case hardened and finished with Melonite QPQ for extreme resistance to wear and corrosion. Mounts on any MIL-STD-1913 PicatinnySTANAG 4694 rail. ELEVATION ADJUSTMENT 1 MOA 1.131100 m per click with a 14.5 sight radius 0.7 MOA 0.820100 m per click with a 20 sight radius. Elevation adjustment knob no tools required. Positive detents in both the up and down positions as well as on the elevation knob Standard sight height when deployed.

The most lightweight and tactile glove in the Magpul lineup Offers abrasion protection with maximum dexterity. Durable synthetic construction with suede-backed thumbs High-abrasion synthetic suede palm for durability and better grip. Protects active hands with minimum impact on fine motor skills Narrow forefinger for easy access and better control of your firearms trigger and selector Ambidextrous three-finger touchscreen capability. Compression-molded neoprene cuff for secure fit Corded nylon construction for back-of-hand stretch and enhanced durability. Reinforced suede pull tab Suede-backed thumb area to quickly remove fogging on hunting optics and glasses.

Compatible with Picatinny. All steel construction. Elevation adjustment knob no tools required. MBUS Pro Sight Set Front Rear.

Impact resistant polymer construction provides light weight and resists operational abuse. Spring-loaded flip up sight easily activated from either side or by pressing the top. Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.. Clamps to most any MIL-STD-1913 PicatinnySTANAG 4694 rail and provides the same height-over-bore as standard A2 irons. Protective wings shield the spring-locking A2 front sight post Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well.

Made using the highest quality materials. Tested for durability. Designed to be safe and unique.

All steel construction Steel, rectangular sight post selectable between Match and Standard widths .040 Match width for increased precision .060 Standard width for maximum visibility. Case hardened and finished with Melonite QPQ for extreme resistance to wear and corrosion. Mounts on any MIL-STD-1913 PicatinnySTANAG 4694 rail. Windage Adjustment - 0.5 MOA 0.566 inch100m per click with a 14.5 inch sight radius. 0.4 MOA 0.410 inch100m per click with a 20 inch sight radius. Elevation adjustment knob no tools required. Positive detents in both the up and down positions as well as on the elevation knob Standard sight height when deployed.

All steel construction steel, rectangular sight post selectable between match and standard widths .040 Match width for increased precision .060 Standard width for maximum visibility. Case hardened and finished with Melonite QPQ for extreme resistance to wear and corrosion. Mounts on any MIL-STD-1913 PicatinnySTANAG 4694 rail. Elevation adjustment wheel for 200-600 meter distances in 50 meter increments. Positive detents in both the up and down positions standard sight height when deployed.

Impact resistant polymer construction provides light weight and resists operational abuse. Spring-loaded flip up sight easily activated from either side or by pressing the top. Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.. Clamps to most any MIL-STD-1913 PicatinnySTANAG 4694 rail and provides the same height-over-bore as standard A2 irons. Protective wings shield the spring-locking A2 front sight post Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well.

Made from reinforced polymer and an anodized aluminum bedding block Offers users a cost effective replacement fixed stock featuring enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock?requires no bedding and is a true drop-in solution for the end user Fits right-hand receivers only M-LOK compatible to accept a broad range of accessories. Compatible with our?Bolt Action Mag Well 700L?which allows the rifle to be used with detachable AICS-spec box mags without the need for custom inletting. Compatible with standard Remington 700 pattern?long action rifles with stock Remington hinged floorplates. Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block Accepts ALL factory Remington barrels.

Made from reinforced polymer and an anodized aluminum bedding block Offers users a cost effective replacement fixed stock featuring enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock?requires no bedding and is a true drop-in solution for the end user Fits right-hand receivers only M-LOK compatible to accept a broad range of accessories. Compatible with our?Bolt Action Mag Well 700L?which allows the rifle to be used with detachable AICS-spec box mags without the need for custom inletting. Compatible with standard Remington 700 pattern?long action rifles with stock Remington hinged floorplates. Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block Accepts ALL factory Remington barrels.

Made from reinforced polymer and an anodized aluminum bedding block Offers users a cost effective replacement fixed stock featuring enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock?requires no bedding and is a true drop-in solution for the end user Fits right-hand receivers only M-LOK compatible to accept a broad range of accessories. Compatible with our?Bolt Action Mag Well 700L?which allows the rifle to be used with detachable AICS-spec box mags without the need for custom inletting. Compatible with standard Remington 700 pattern?long action rifles with stock Remington hinged floorplates. Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block Accepts ALL factory Remington barrels.

Floorplate replacement for current issue aluminum USGI mages. Incorporates a rubberized pad made of durable Santoprene rubber overmolded onto a stainless steel plate. Allows for rapid and Controlled magazine handling. Flexible material protects magazine base from impact integrated holes for use with custom para-cord loops. Note the USGI Ranger Plate will not fit the PMAG or EMAG.

Impact resistant polymer construction provides light weight and resists operational abuse. Spring-loaded flip up sight easily activated from either side or by pressing the top. Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.. Clamps to most any MIL-STD-1913 PicatinnySTANAG 4694 rail and provides the same height-over-bore as standard A2 irons. Protective wings shield the spring-locking A2 front sight post Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well.