REVERSE POLARITY SMA MALE TO N MALE LMR 400 Equivalent 50 Ohm Coaxial Jumper Cable. VERY LOW-LOSS DOUBLE SHIELDED LMR400-size 50-Ohm Coax Meets or Exceeds Times Microwave LMR400 Specifications - Up to 70 Less Loss than RG8U RG213U Coax. SOLID COPPER CLAD ALUMINUM CORE WIRE - Braided Tinned Copper Shielding - Low VSWR - Indoor Outdoor Use. PRO-GRADE QUALITY - Gold Plated Signal Pins - Heat Shrink on Both Ends - Tough PE Outer Jacket Withstands Abrasions Provides Excellent Outdoor Moisture Resistance. 100 FACTORY TESTED - Each Cable Assembly is Fully Tested. COMPATIBLE WITH all brands of Wi-Fi Access Points WiFi Routers, WLAN Bridges, LoRa, Helium Miners and other RP-SMA Wireless Devices and N Female antennas.

TIMES MICROWAVE LMR STANDARD is a UV Resistant Polyethylene jacketed cable designed for outdoor exposure. By incorporating the best materials for UV resistance these cables have an outdoor life expectancy in excess of 20 years. Bending and handling characteristics are significantly better than air-dielectric and corrugated hard-line cables.. FLEXIBILITY AND BENDABILITYare hallmarks of the LMR- 400 cable design. The flexible outer conductor enables the tightest bend radius available for any cable of similar size and performance. LMR-400 is an excellent cable for runs up to 50-70 feet in WiFi and Cellular use, and provides superior performance for HFUHFVHF installation up to 250 feet. The PE jacket used on LMR-400 makes it able to stand abrasion.. LOW LOSS is another hallmark feature of LMR-400. Size for size LMR has the lowest loss of any flexible cable and comparable loss to semirigid hard-line cables.. RF SHIELDINGis 50 dB greater than typical single shielded coax 40 dB. The multi-ply bonded foil outer conductor is rated conservatively at 90 dB i.e. 180 dB between two adjacent cables .. CONNECTORS A wide variety of connectors are available for LMR-400 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. Most LMR connectors employ crimp outer attachment using standard hex crimp sizes. This cable is made a N Male and a N Female connector..

COMPATIBLE WITH ALL HELIUM MINERS RP-SMA Male connector compatible with all known Helium Hotspot HNT Miners. Nebra RAK Bobcat Syncrobit Sensecap. Also compatible with Wireless Network Router, WiFi AP Hotspot Modem, WiFi USB Adapter, Desktop PC Wireless Mini PCI Express PCI-E Network Card Adapter.. LOW SIGNAL LOSS Our highest-performing Raigen-400 cable, 50 Ohm Coaxial. Constructed with a copper clad aluminum conductor and double shielding protected UV proof PVC jacket. Out-performing lower quality RG58 cables in performance and durability.. QUALITY INDUSTRY STANDARD Constructed with a 0.1 Bare Copper Clad Core Double Shielding delivers the highest signal transfer and is the top choice for coaxial application. Low Attenuation of 4.35 db100 ft measured 900Mhz, delivering 5x better performance vs standard RG58 cables.. RELIABLE CONNECTIVITY Protected with a durable PVC jacket and water tight terminals, the Raigen-400 cable is ready for indoor or outdoor use. Whether it's baking in the sun or keeping the water out in the rain, the cable is built to last and keep your passive rewards coming in every day.. ANTENNA COMPATIBILITY N-Type Female connection for most common LoRaWAN Gateway Antennas - works best with Raigen HNT Antennas. For all other WiFi antennas please check compatibility with connector terminals..

FOR 50 OHM SYSTEMS Works for any 50 Ohm RF system, including cell phone boosters and WiFi repeaters. This 100 feet of coaxial cable facilitates the uninterrupted transfer of cellular signal from devices, boosters, and other technologies while greatly reducing signal strength loss.. LMR400 Equivalent SPECIFICATION This ultra low-loss cable features a loss per 100 feet rating of only 6 dB. You can expect a negligible amount of loss from this length and grade of cable It features an N-Male connector on one end and an N-Male connector on the other with a black outer coating.. PRO-GRADE COAXIAL CABLE CL3 rated, this coaxial cable carries up to 300 volts, making it ideal for commercial applications and buildings. The patented triple-shielded, insulated interior ensures the lowest loss at its thickness for both the highest signal quality and energy efficiency.. FOR ALL CARRIERS AND DEVICES For use with antennas and signal boosters, Bolton Technical Bolton400 Ultra Low-Loss coaxial cable does not discriminate, allowing for long runs of cellular signal for any North American carrier, including ATT, Verizon, T-Mobile, Sprint, US Cellular, Straight Talk, Tracfone, Rogers, Bell, Telus, and more. It also works for any device that makes use of cellular signal, including hotspots, iPhones, Android devices, tablets, Verizon jetpacks, and more.. UNPARALLELED SUPPORT All Bolton Technical products come with lifetime technical support, a 30-day money-back guarantee, and a full year of warranty..

COMPATIBLE WITH ALL HELIUM MINERS RP-SMA Male connector compatible with all known Helium Hotspot HNT Miners. Nebra RAK Bobcat Syncrobit Sensecap. Also compatible with Wireless Network Router, WiFi AP Hotspot Modem, WiFi USB Adapter, Desktop PC Wireless Mini PCI Express PCI-E Network Card Adapter.. LOW SIGNAL LOSS Our highest-performing Raigen-400 cable, 50 Ohm Coaxial. Constructed with a copper clad aluminum conductor and double shielding protected UV proof PVC jacket. Out-performing lower quality RG58 cables in performance and durability.. QUALITY INDUSTRY STANDARD Updated Secure Terminal Connection. Constructed with a 0.1 Bare Copper Clad Core Double Shielding delivers the highest signal transfer and is the top choice for coaxial application. Low Attenuation of 4.35 db100 ft measured 900Mhz, delivering 5x better performance vs standard RG58 cables.. RELIABLE CONNECTIVITY Protected with a durable PVC jacket and water tight terminals, the Raigen-400 cable is ready for indoor or outdoor use. Whether it's baking in the sun or keeping the water out in the rain, the cable is built to last and keep your passive rewards coming in every day.. ANTENNA COMPATIBILITY N-Type Female connection for most common LoRaWAN Gateway Antennas - works best with Raigen HNT Antennas. For all other WiFi antennas please check compatibility with connector terminals..

FOR 50 OHM SYSTEMS Works for any 50 Ohm RF system, including cell phone boosters and WiFi repeaters. This 50 feet of coaxial cable facilitates the uninterrupted transfer of cellular signal from devices, boosters, and other technologies while greatly reducing signal strength loss.. LMR400 Equivalent This ultra low-loss cable features a loss per 100 feet rating of only 6 dB. You can expect a negligible amount of loss from this length and grade of cable It features an N-Male connector on one end and an N-Male connector on the other with a black outer coating.. PRO-GRADE COAXIAL CABLE CL3 rated, this coaxial cable carries up to 300 volts, making it ideal for commercial applications and buildings. The patented triple-shielded, insulated interior ensures the lowest loss at its thickness for both the highest signal quality and energy efficiency.. FOR ALL CARRIERS AND DEVICES For use with antennas and signal boosters, Bolton Technical Bolton400 Ultra Low-Loss coaxial cable does not discriminate, allowing for long runs of cellular signal for any North American carrier, including ATT, Verizon, T-Mobile, Sprint, US Cellular, Straight Talk, Tracfone, Rogers, Bell, Telus, and more. It also works for any device that makes use of cellular signal, including hotspots, iPhones, Android devices, tablets, Verizon jetpacks, and more.. UNPARALLELED SUPPORT All Bolton Technical products come with lifetime technical support, a 30-day money-back guarantee, and a full year of warranty..

LMR400 CABLE TYPE A Registered Trademark of Times Microwave Systems LMR-400 Coaxial cable is a direct drop-in replacement for RG-89913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources.. CONNECTOR TYPES N type male to N type male HFVHFUHF DC up to 6 GHz. ULTRA LOW LOSS FLEXIBILITY This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required Ensures maximum performance for your antenna installation.. OUTER JACKET MATERIAL Flexible IndoorOutdoor UV Proof FR-PE, Outer Diameter .400 10.3mm nom., SRL per MIL-C-1774. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources.. WARRANTY This is A Genuine U.S.A made Times Microwave TM Product, Providing The Best Signal in RF Coaxial Cables since 1948. Assembled by MPD Digital, a DoD Supplier - in a GA Facility using MILSPEC Components. Limited 1 year Warranty and 60 Day replacement on all MPD Digital Cable Assemblies..

COMPATIBLE WITH ALL HELIUM MINERS RP-SMA Male connector compatible with all known Helium Hotspot HNT Miners. Nebra RAK Bobcat Syncrobit Sensecap. Also compatible with Wireless Network Router, WiFi AP Hotspot Modem, WiFi USB Adapter, Desktop PC Wireless Mini PCI Express PCI-E Network Card Adapter.. LOW SIGNAL LOSS Our highest-performing Raigen-400 cable, 50 Ohm Coaxial. Constructed with a copper clad aluminum conductor and double shielding protected UV proof PVC jacket. Out-performing lower quality RG58 cables in performance and durability.. QUALITY INDUSTRY STANDARD Constructed with a 0.1 Bare Copper Clad Core Double Shielding delivers the highest signal transfer and is the top choice for coaxial application. Low Attenuation of 4.35 db100 ft measured 900Mhz, delivering 5x better performance vs standard RG58 cables.. RELIABLE CONNECTIVITY Protected with a durable PVC jacket and water tight terminals, the Raigen-400 cable is ready for indoor or outdoor use. Whether it's baking in the sun or keeping the water out in the rain, the cable is built to last and keep your passive rewards coming in every day.. ANTENNA COMPATIBILITY N-Type Female connection for most common LoRaWAN Gateway Antennas - works best with Raigen HNT Antennas. For all other WiFi antennas please check compatibility with connector terminals..

ULTRA LOW LOSS This low loss transmission line can be used in almost any application where handling characteristics and when improved shield and low loss is required.. CONNECTOR TYPE This cable is made with high quality crimp PL-259 connectors. They are Nickel-plated brass and have the center conductor soldered to ensure an excellent signal.. CABLE TYPE LMR-400 is a Registered Trademark of Times Microwave Systems LMR-400 Coaxial cable is a direct drop-in replacement for RG-89913. LMR-400 is a Low Loss Flexible Coax Cable Double Shielded with Black PE Jacket. OUTER JACKET MATERIAL Flexible UV Proof, Polyethylene, Outer Diameter .405 10.3mm nom., SRL per MIL-C-1774 - Foam Dielectric Aids Flexibility.. COMMON USE These connectors are commonly used for CB, HAM, UHF, VHF and some scanners. Great as a jumer to an antenna tuner, switch, meter or main antenna..

ULTRA LOW LOSS This low loss transmission line can be used in almost any application where handling characteristics and when improved shield and low loss is required.. CONNECTOR TYPE This cable is made with high quality crimp PL-259 connectors. They are Nickel-plated brass and have the center conductor soldered to ensure an excellent signal.. CABLE TYPE LMR-400 is a Registered Trademark of Times Microwave Systems LMR-400 Coaxial cable is a direct drop-in replacement for RG-89913. LMR-400 is a Low Loss Flexible Coax Cable Double Shielded with Black PE Jacket. OUTER JACKET MATERIAL Flexible UV Proof, Polyethylene, Outer Diameter .405 10.3mm nom., SRL per MIL-C-1774 - Foam Dielectric Aids Flexibility.. COMMON USE These connectors are commonly used for CB, HAM, UHF, VHF and some scanners. Great as a jumer to an antenna tuner, switch, meter or main antenna..

N female to reverse polarity SMA male kit cable, it is the same quality as LMR 400 coaxial cable, length 3FT, 10FT, according to the need to choose to buy, waterproof, sunlight and corrosion resistant, the cable is made of durable polyethylene sheath, suitable for indoor and outdoor installation. This Helium Hotspot Antennas cable comes with an SMA kit that allows you to convert the SMA female connector to SMA male connector for easy installation or to reduce your investment in the cable and to be compatible with more devices.. In addition to the Lorawan Antenna, it can also be used as other N-type cable antennas, extension cables, Patch Cables, Jumper Cables, very stable and solid installation, no worries about it falling off.. N female antenna cable, compatible with 50 Ohm system devices, it transmits signals between devices and antennas without interruption while reducing the amount of signal loss to a minimum, N female connectors are suitable for the most common LoRaWAN gateway antennas, Raigen HNT antennas, and compatible with wireless network routers, WiFi AP hotspot modems, WiFi USB adapters, desktop Computer Wireless Mini PCI Express PCI-E NIC Adapter. After years of experience and accumulation in the coaxial cable field, we are confident in our products. If you have other unique needs for coaxial cable, please let us know and we will provide you with solutions and products. We have a professional team of customer service experts to provide you with after-sales service and a 1-year warranty during use. If you have any problem, please get in touch with us and we will replace the latest product for you..

All Cable Assemblies Now Inc cable assemblies are MADE IN THE USA - we pride ourselves in making sure we provide all of our customers with the best quality product made with the highest quality materials.. Use highly durable and waterproof PVC outer jacket, heat shrink with adhesive on both ends of connector that could provides excellent moisture resistance. It is designed for 20 year outdoor exposure in harsh environments. We use 31 heat shrink with adhesive over 2 inch in length to ensure weatherproof connection is best quality for any application.. Works With - BOBCAT Miner,Helium HNT Hotspot Miner,RAK Hotspot Miner,Nebra HNT Indoor Hotspot Miner,Outdoor WiFi Antenna,,LoRaWan LoRa Gateway Antenna,WiFi Router,WiFi Signal Amplifier,Wireless Access Point,Wireless Card,3G4GLTE Cellular Modems,Ham Radio,Coaxial Lightning Arrester,etc.. We can that any cable under 1000MHz will have a Standing wave ratio plot of 1.251 at any frequency under 1000 MHz - We can also test return loss, insertion loss, phase angle, and use a Vector Network Analyzer to measure for both match and resonance.. on ALL Cable Assemblies made and mfg by Cable Assemblies Now Inc. have a limited 10 year - Please do not hesitate to contact us for any questions or concerns. Please be sure this cable works for your connector type prior to purchase. Unit count 1.0.

All Cable Assemblies Now Inc cable assemblies are MADE IN THE USA - we pride ourselves in making sure we provide all of our customers with the best quality product made with the highest quality materials.. Use highly durable and waterproof PVC outer jacket, heat shrink with adhesive on both ends of connector that could provides excellent moisture resistance. It is designed for 20 year outdoor exposure in harsh environments. We use 31 heat shrink with adhesive over 2 inch in length to ensure weatherproof connection is best quality for any application.. Works With - BOBCAT Miner,Helium HNT Hotspot Miner,RAK Hotspot Miner,Nebra HNT Indoor Hotspot Miner,Outdoor WiFi Antenna,,LoRaWan LoRa Gateway Antenna,WiFi Router,WiFi Signal Amplifier,Wireless Access Point,Wireless Card,3G4GLTE Cellular Modems,Ham Radio,Coaxial Lightning Arrester,etc.. We can that any cable under 1000MHz will have a Standing wave ratio plot of 1.251 at any frequency under 1000 MHz - We can also test return loss, insertion loss, phase angle, and use a Vector Network Analyzer to measure for both match and resonance.. on ALL Cable Assemblies made and mfg by Cable Assemblies Now Inc. have a limited 10 year - Please do not hesitate to contact us for any questions or concerns. Please be sure this cable works for your connector type prior to purchase. Unit count 1.0.

All Cable Assemblies Now Inc cable assemblies are MADE IN THE USA - we pride ourselves in making sure we provide all of our customers with the best quality product made with the highest quality materials.. Use highly durable and waterproof PVC outer jacket, heat shrink with adhesive on both ends of connector that could provides excellent moisture resistance. It is designed for 20 year outdoor exposure in harsh environments. We use 31 heat shrink with adhesive over 2 inch in length to ensure weatherproof connection is best quality for any application.. Works With - BOBCAT Miner,Helium HNT Hotspot Miner,RAK Hotspot Miner,Nebra HNT Indoor Hotspot Miner,Outdoor WiFi Antenna,,LoRaWan LoRa Gateway Antenna,WiFi Router,WiFi Signal Amplifier,Wireless Access Point,Wireless Card,3G4GLTE Cellular Modems,Ham Radio,Coaxial Lightning Arrester,etc.. We can that any cable under 1000MHz will have a Standing wave ratio plot of 1.251 at any frequency under 1000 MHz - We can also test return loss, insertion loss, phase angle, and use a Vector Network Analyzer to measure for both match and resonance.. on ALL Cable Assemblies made and mfg by Cable Assemblies Now Inc. have a limited 10 year - Please do not hesitate to contact us for any questions or concerns. Please be sure this cable works for your connector type prior to purchase. Unit count 1.0.

We are providing you with a 1-year limited warranty and 60 Day Replacement on all Cable Assemblies. If you face any problems or performance malfunctions, please contact us directly. We are providing you with a 1-year limited warranty and 60 Day Replacement on all Cable Assemblies. If you face any problems or performance malfunctions, please contact us directly. Cable Assemblies Now Inc jumpers are made with the highest quality materials allowing the cable to provide superior performance for a long time. Triple wall 31 adhesive heat-shrink on each connection for extra durability. Specific Uses Ham Radio, CB Radio, Cellular WiFi Signal Boosters, Antenna Installation, Antenna Analyzers, Signal Repeaters, Marine Antennas, Surge Suppressors, Signal Splitters. Times Microwave Systems is the only manufacturer of genuine LMR cable. Other LMR Equivalent Cables may be similar, but they are not equivalent. Times Microwave uses unique and proprietary dielectric materials for optimum electrical and mechanical performance. LMR is a US registered trademark of Times Microwave Systems and is a registered trademark in 30 other countries. LMR identifies flexible communications coax cable produced and distributed by Times Microwave Systems only and may not be used as an identifier of cables or communication products of any businesses other than Times Microwave Systems. Connector material Brass Not Alloy Body Plating Nickel. Contact Pin Brass, Gold plating. Contact point tin plating. 1000 Times Mating Lifetime.

CABLE TYPE Genuine Times Microwave LMR-400 Coaxial Cable. Direct Drop-In Replacement for RG-89913 and other UF designated Cables of this size variant.. CONNECTOR TYPE MPD Digital N Type Female to RP-SMA Male coax connectors. UHFVHF WIFI up to 6 GHz. Connects access points, GPS systems, rotary antenna assemblies, WiFi hotspots, receivers, scanners, meters, wireless internet routers and radio transmitters to antennas.. PEOPLES NETWORK Compatible with Helium and IOT hotspot antennas and devices designed for low power wide area networks LPWANs or LoRaWAN from 868-869 MHz and 902-930 MHz also known as EU868 Frequency Plan and US915 Frequency Plan. Cable assemblies used for mining cryptocurrency such as HNT, Litecoin, Bitcoin, etc.. ULTRA LOW LOSS This low loss coaxial transmission Line can be used in almost any application where good handling characteristics, improved shielding, and low loss is required.. FLEXIBLE JACKET flexible UV proof PVC jacket, outer diameter .405 Inches 10.3mm nom., SRL, per MIL-C-18. Designed for 20 year outdoor or indoor applications and the outer jacket resists ultraviolet light and oxidation. Bends and handles significantly better than air-dielectric corrugated PE hardline cables.. USES To connect miner to antennaarrester. For best results and low loss, we recommend using cable lengths up to 75 ft..

CABLE TYPE LMR-400 Coaxial Cable. Direct Drop-In Replacement for RG-89913 and other UF designated Cables of this size variant.. CONNECTOR TYPE N Type male to RP-SMA male coax connectors. UHFVHF WIFI up to 6 GHz. Connects access points, GPS systems, rotary antenna assemblies, WiFi hotspots, receivers, scanners, meters, wireless internet routers and radio transmitters to antennas.. PEOPLES NETWORK Compatible with Helium and IOT hotspot antennas and devices designed for low power wide area networks LPWANs or LoRaWAN from 868-869 MHz and 902-930 MHz also known as EU868 Frequency Plan and US915 Frequency Plan. Cable assemblies used for mining cryptocurrency such as HNT, Litecoin, Bitcoin, etc.. ULTRA LOW LOSS This low loss coaxial transmission Line can be used in almost any application where good handling characteristics, improved shielding, and low loss is required.. FLEXIBLE JACKET flexible UV proof PVC jacket, outer diameter .405 Inches 10.3mm nom., SRL, per MIL-C-18. Designed for 20 year outdoor or indoor applications and the outer jacket resists ultraviolet light and oxidation. Bends and handles significantly better than air-dielectric corrugated PE hardline cables.. USES To connect miner to antennaarrester. For best results and low loss, we recommend using cable lengths up to 75 ft..

Reverse Polarity SMA Male to N Male LMR 400 Equivalent 50 Ohm Coaxial Jumper Cable. High Quality, High Speed Coaxial Cable Connects RPSMA Female Equipment to Antennas with N Female Connectors. 25ft Length of Low-Loss CFD 400 Coaxial Cable - Up to 85 Less Loss than RG8U RG213U Coax. Identical to Times Microwave LMR400 - Significantly Outperforms Generic RG Coax. This LMR 400 Helium Miner Cable has Gold Plated Signal Pins Heat Shrink on Both Ends.

Lmr400 LMR-400 is a Registered Trademark of Times Microwave systems. 60 Day Returns - Plus a 1 year replacement for defects on all MPD Digital cable assemblies from date of purchase.. Outer jacket material flexible UV proof wp-pe, outer diameter .405 10.3mm nom., SRL per MIL-C-1774 - foam dielectric aids flexibility. Made in the U.S.A. By FCC licensed ham radio operators - swept with bird sitehawk sk-4000 TO assure VSWR less than 1 1.35. This low loss coaxial transmission line can be used in almost any application where good handling characteristics, improved shielding, and low loss is required.