MORE LEDS, MORE FOCUS, MORE BRIGHTNESS HLauto 1002L traffic advisor strobe light bar is designed with 40 high-intensity LEDs and PS magnifying lens, making it brighter than the other 24 LEDs traffic advisor strobe light bars. Ensuring your safety in any driving conditions. EASY TO INSTALL Equipped with 4 and 90 adjustable strong and stability suction cups brackets, 8 strong suction cups, and 16.4ft long cable, you can easily install this 2 in 1 windshield emergency strobe lights on your rearfront windshield, and exterior of vehicles. 26 FLASHING PATTERNS WITH LAST MEMORY RECALL Just plug in the 12V cigarette lighter, and choose the strobe mode you need. This LED strobe light bar can be widely used for Hazards Warning, EMS, Law Enforcement, First Responders, Emergency Vehicles, Construction Vehicles, Police, TowWork Truck, Snowplow, Postal and City Service Workers, etc. BUILD TO LAST HLauto 1002L emergency warning lights bar is made of heavy-duty aluminum housing for superior heat dissipation. IP67 Water-resistant rating, great for withstand various weather conditions, such as rain, fog, dust storms, snow, mud, and wind seasons, making the light visible from thousands of feet away. Lifespan up to 50,000 Hours. FOR YOUR RIGHTS HLauto emergency strobe lights for vehicles come with a 2-year honor and 24-hour service. Please directly contact us through your Order Number or User Manual.

Applicable Tube Diameter The roll cage mount is equipped with 3 non-slip and soft rubber ring inserts, standard inner diameter size 0.87511.125. Therefore, this heavy-duty whip bracket is ideal for mounting 0.875-inch 22mm 1 inch 1.125-inch 28.6mm 1.26-inch 32mm round rails on ATV, Quad ATV, golf cart, 4-wheeler, motorcycle.. Heavy Duty Design Our CNC-machined, Class III anodized surface aluminum light bar mounting brackets feature a thickened and reinforced design that ensures the durability and reliability of this ATV whip light mount, even in the most demanding environments.. Strong Grip Single hinge design, double bolt locking, and equipped with standard inner diameter size anti-slip rubber ring make our light bar mounts more fit with Roll cage, roof rack, front rack and other round tubes.. 360 Degree Adjustment The whip flag mount is designed with snap gears, allowing easy adjustment of the 360-degree angle of the installation device.. Widely Compatible The hole diameter for mounting the device screws is 12.7 mm 0.5 and can match the base screws of most devices on the market. Ideal for installing heavy-duty whip lights, flagpoles, light bars, spotlights, chase lights, off-road vehicle LED lights, antennas and other application equipment.. Notice Please measure the diameter of the tube before purchasing to ensure that this tube clamp mounting bracket is suitable for installation. The kit contains two heavy duty whip mounts, each weighing up to 300 grams 0.66 lbs 10.58 oz.. Why Choose Us Our light bar clamp mount isnt just another accessoryits a game-changer for your off-road experience. Designed with riders in mind, it combines durability, flexibility, and ease of use. Whether youre tackling rocky trails or cruising through the desert, this mount keeps your light bar exactly where you need it..

MATERIAL Whip mounts are made of cast aluminum and well finished. Strong, rustproof, impact-resistant, and scratch-resistant whip light mounting brackets, suitable for all weather conditions and situations. STRONGER Unique-designed flag mounts using stiffener ribs to be more stable. Cooperating with 10mm-thick bases, flag brackets would hold your products up to much off roading safer, comparing with other sheet or plastic flag mounting brackets in the market. 360 ADJUSTABLE Light bar brackets have 360 rotation adjustability for you to turn them as you like for different purposes. Light bar mounts using 12 pins to lock the mount in and keep them more stable than using a single screw. APPLICATION 12.2mm 0.48inch hole diameter of KEMIMOTO mounting brackets work great for installing led whip lights, flags, led light bars, led pods, cb antennas on the UTV cage. FITMENT CB antenna mounts only fit UTV pro-fit cages channel shaped cages, are compatible with Polaris Ranger General Polaris Expedition2024 2025 Can-Am Defender Commander 2021 Maverick Trail Sport.

Compatible Model Fits for Ford F-150 2015 and Ford F-250 F-350 F-450 F-550 2017, features a 22 long x 10 deep mounting surface.. Bolt Magnetic MountThis cab mount is suitable for both magnetic and bolt mounting options. Supports bolt-on installation for aluminum base plate, magnetic mounting for metal panel.. Adjustable HeightSimply adjust the nut on the magnetic base bolt to change the distance between the light bar mount and cab. To reposition or remove, just loosen the nut or pull the light bar magnetic mount off the iron plate.. Powder Coating Premium MetalMade of high-quality steel with black powder coating. The light bar mount is resistant to corrosion, weather, and scratches, ensuring long-lasting durability.. No drilling installation No need to drilling holes in the cab. Suitable for strobe lights weighing less than 10 lbs. Pre-drilled holes simplify bolt-on install steel ensures secure magnetic holdno extra tools needed. Rubber gaskets stainless steel screws reduce shake, keeping your lights and lights mounts secure..

Flush Mount LED Pods - Different from the normal flush mount led pod lights you have, you don't need a big cutting space in vehicles when using it. Cause it is panel mount directly.. Slim LED Light Bars - Small led light bar of spot beam, so whatever the tiny space is, it can be there. Longer lifespan over 50,000 hours.. Easy to Mount - 6 inch LED lightbar, same dimension but a new flush mount led light pods directly for your off-road vehicles.. Widely Use Back-up Lights - Fits to mostly 12v offroad vehicles as bumper lights for car autos carro 4x4, as 12 volt grill reverse light pods for trucks trailer tractor golf cart and so on.. What You Get - 2pcs flush mount led pod lights kit..

Fit for Aluminum Cab Metal CabSuitable for Magnetic Light Bars and Magnetic Antenna, avoid drilling holes in the cab. Especially design for Ford F-150 2015 for Ford F-250-F-550 2017. 22-inch long, 10-inch deep mounting platform are perfect for LED truck lights, work lights, warning lights, etc.. Bolt Magnetic MountSuitable for BOTH magnetic-mounting as well as bolt-mounting. Made of robust METAL, it will hold your magnetic lamp securely. After practical measurements, the light bar cab mount is pre-drilled with screw holes for bolt-on installation of various models of light bars, providing more choices and convenience.. ?Complete Kit Rubber Gaskets- STABILITY Supplied with anchor plates, stainless steel screws. Rubber gaskets on the inner Light Bar Cab Mount fit securely into the cab frame, and the mount can securely hold on your car, allowing for strong stability in just about most driving situations.. Thick Metal Rugged Construction Design for situations in tricky terrain with unpredictable weather. Made of robust steel and high-end material with powder-coating, this Metal Light Bar Mount features the properties of corrosion resistant, weather resistant and strong stability in the long run.. Give Yourself Extra Safety Personality Multi-site use, it useful for so many activities like off-roading, hunting, outdoor work, or just driving down a poorly illuminated road. Applying the cab mount and light bars are incredibly versatile, which makes your car safer and improves vision, helping you see better on poorly lit roads. It also adds some personality to your ride when you install your favorite utility light bar..

Fit for Aluminum Cab Metal CabSuitable for Magnetic Light Bars and Magnetic Antenna, avoid drilling holes in the cab. Especially design for Ford F-150 2015 for Ford F-250-F-550 2017. 22-inch long, 10-inch deep mounting platform are perfect for LED truck lights, work lights, warning lights, etc. Bolt Magnetic MountSuitable for BOTH magnetic-mounting as well as bolt-mounting. Made of robust METAL, it will hold your magnetic lamp securely. After practical measurements, the light bar cab mount is pre-drilled with screw holes for bolt-on installation of various models of light bars, providing more choices and convenience. Complete Kit Rubber Gaskets- STABILITY Supplied with anchor plates, stainless steel screws. Rubber gaskets on the inner Light Bar Cab Mount fit securely into the cab frame, and the mount can securely hold on your car, allowing for strong stability in just about most driving situations. Thick Metal Rugged Construction Design for situations in tricky terrain with unpredictable weather. Made of robust steel and high-end material with powder-coating, this Metal Light Bar Mount features the properties of corrosion resistant, weather resistant and strong stability in the long run.Note Occasionally, screw holes may become clogged during powder coating.If this happens, please let us know and we will solve it for you within 24 hours. Give Yourself Extra Safety Personality Multi-site use, it useful for so many activities like off-roading, hunting, outdoor work, or just driving down a poorly illuminated road. Applying the cab mount and light bars are incredibly versatile, which makes your car safer and improves vision, helping you see better on poorly lit roads. It also adds some personality to your ride when you install your favorite utility light bar.

Anti-slip Surface the surface contacting with the front cover of the car covers a multi-layer non-slip composite material and loss prevention materials to ensure that the contact surface of the bracket will not damage the car surface paint. Universal It can be used to install almost all LED Light Pods. Easy to install. No any damage to the car surface paint. Stable Durable Five Screws are enough to tight the light with the car cover tightly. Made of 304 Stainless Steel, the surface covered with rubber anti-rust paint, can ensure absolute anti-rust, anti-corrosion. 2 Years Warranty Honored by Nilight.

Multi-application The mini bar clamp is designed for a smaller horizontal tube size 0. 75, 1, 1. 25. It is applicable for roof racks, roll cages, bull bars, handlebars on an ATV, UTV and trucks.. High Compatibility Compatible with various types of light bar brackets, the 10mm screw hole diameter fits all light with 8mm mounting screws.. Perfect Fit Rubber Inserts Rubber insertsstrip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp. Making installation easier and always protecting the metal from being worn down.. Built With Quality Clamps are built using precision-welded cast sturdy aluminum, makes it lightweight, but pretty neat and durable. Make Light Mounting Easier With the high compatible bar clamp, youre free of the hassle of lighter mounting and drilling holes in your vehicle body Simple all in one kit, make your life easier 2 Years Warranty Honored by Nilight.

brighter than ever - 40w led work light bar adopts 4pcs high-intensity cree leds, output up to 3600lm luminous flux with 6000k crystal white beam, added more clear visibility to your offroad vehicle, but no glares to upcoming drivers. wider is clearer upgraded with new type of deep and wide-angle reflector cup, effective diffused flood light source to cover a wider range, let you easily see surroundings at anytime, anywhere. build to last made of oversize alu-diecast heat sinks for fast cooling, ip67 waterproof rating, with military breather for quickly driven away excess mist and dew, it runs well both in shiny and rainy days, up to 50000hrs lifespan. flush mount, low windage come with a rubber pad for easy opening and shockproof flush mount, better reduce wind drags, looks like they're supposed to be on the oem position, pretty decent lights for backup reverse, running light, auxiliary lamp, parking light, garden light and more. Package Included2pcs 40w LED light bar,2 sets of Mounting brackets,2 Years Warranty by Nilight.

X3 High Output Light Bar Kit Our light bar kits include our premium Compact High Output Spot LED light bars, X3 specific mountin bracket wiring kit with switch.This 40W light bar puts out 4,000 lumens yellow spot beam lighting.. Dust-Cutting Visibility Emphasize the amber lens. In off-road racing or group rides, white light reflects off dust blinding the driver, while amber penetrates it.. Plug and Play X3 shock mount Kits is easy to install, Offers a direct bolt-on application that requires no drilling or cutting, attaching directly to the factory cage for a clean, integrated look. Stable And Durable This heavy-duty steel mount gives you an easy place to mount your 13.4 X3 light bar and wont come loose when you ride hard at high speeds. Waterproof IP67- X3 light bar kits all adopt a fully waterproof design to ensure stable operation in various adverse weather conditions. whether it is heavy rain, heavy snow or muddy roads, it can maintain good performance.. Fitment Comaptible with 2017-2025 Can-Am Maverick X3.The low-profile shock tower bracket utilizes existing factory mounting points for a seamless, no-drill installation. Complete All-in-One Kit Includes everything needed for installation 1x 13.4-inch Single Row Amber LED Light Bar, 1x Heavy-Duty Steel Shock Tower Bracket, and a complete Plug-and-Play Wiring Harness with a relay, fuse, and dedicated LED Light Bar rocker switch.. Enhanced Low-Beam Visibility By mounting at the shock tower level lower than the roof, this light acts as an ideal fog or driving light. It illuminates the immediate ground in front of the UTV, filling the dark void that factory headlights often miss.

Strong Hold Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road. Attention Please make sure the connection surface between the magnect and your vehicle is clean and flat. Rough and unclean surface may decrease the magnet suction power. High Compatibility Can be used on the hood or roof to mount bottom-mounted, side-mounted light bars, straight or curved, single row, double row, triple row, or quad row. As long as the light screw fits on the magnetic base 0.34 inch hole. Still remain ample room to adjust the mounting angle of the light. Not Damage Your Car Paint Covered with black soft rubber in order to protect from scratches and damages on the car paint of your vehicles. Easier Mounting No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please check the 9th picture on the left. Fit Type Universal fit to any contain iron metal surface mount.

Sturdy bracket strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Wide application can be used on tubes of 1, 1-12, 1-34 2 In diameter and applied to LED light bar for almost all kinds of vehicle. Easy installation pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 4 PCs LED light bar mounting bracket, 2 Years Warranty Honored by Nilight.

The light mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments.. Fit on 0.750.87511.1251.261.375 tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, roll bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail.. The tube clamp with 10mm screw hole. Ideal for a variety of applications including light bars, LED off road lights, driving lights, antennas, whip lights and whip flags.. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 0.875 22mm, 1 25.4mm, 1.125 28.6mm, 1.26 32mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp mount have a 1.375 34.92mm diameter mounting hole when without the rubber ring insert.. Note 1.26'' rubber rings can be inserted into 0.875'' and 1'' soft rubber rings to combine rubber ring inserts of different diameters to be compatible with 0.787''20mm 0.75''19mm 0.7''18mm round rail.. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.. Pack of two..

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The screw that holds the utv whip mount in place has two pressure washers, making the utv flag holder more secure and firmly fastened to the roll bar. Two allen wrenches are included for easy installation and removal. Stable Sturdy Structure The whip light mount is made of solid 6061-T6 aluminum alloy, CNC machined, the utv flag mount is finished with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. 360 Flexible Rotation The 12 pin holes of the utv whip light mount correspond to 4 pin teeth, which can be adjusted and rotated 360, making it flexibly adjust to the desired angle, and more options for mounting the flag, whip light or light bar. Anti-slip Rubber Ring Inserts UTV whip light mounting bracket includes 4 sizes of soft TPU rubber ring inserts in 1.538.1mm1.6541.91mm1.7544.45mm1.8546.99mm, with the rubber ring insert removed, the clamp mount diameter is 250.8mm. Wide Application The hole size of utv light bar mount is 0.512.7mm. Such as whip flags, whip lights, antennas and various light bars, etc.. Universal Compatibility The light bar mounting bracket can easily mount on 1.51.651.751.852 bull bar crash bar roof rack roll bar cage. Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

1 SECURE ANTI-SLIP GRIP ON 78 to 1-18 BAR. 12-tooth interlocking clamp design locks onto tubular bars ranging from 78 to 1-18 22mm-29mm without slipping or rotating under vibration. Unlike friction-only mounts, the toothed interface eliminates the weak-point that causes whip droop on rough trails. Includes shim inserts for a snug fit on smaller diameter handlebars and roll cage bars.. 2 CNC-MACHINED 6061 ALUMINUM CONSTRUCTION Each mount is precision-cut from a solid billet of aircraft-grade 6061 aluminum not cast or stamped metal that fatigues and cracks. The black anodizing finish resists corrosion from mud, snow, and salt exposure season after season.. 3 360 ROTATION WITH 12 INDEXED POSITIONS 12 locking pins spaced 30 apart let you dial in the exact angle for your whip light, flag pole, or chase light no re-tightening. Once set, the pin-lock mechanism holds position even through whoops, rock gardens, and high-speed desert runs. Rotate between vertical trail riding and a laid-back dune profile in minites.. 4 BOLT-ON INSTALL IN UNDER 15 MINUTES Everything you need comes in the box two mounts, stainless steel hardware, and hex wrenches. Clamp onto any exposed bar section, tighten the two bolts, and you are done. No drilling, no welding, no removal of existing accessories. Detailed installation card with photos included for first-time ATV owners.. 5 COMPATIBILITY CHECK MEASURE BEFORE YOU ORDER These mounts fit round tubular bars between 78 and 1-18 outside diameter. Measure your bar with a caliper or wrap a tape measure around the bar and divide by 3.14. Compatible with Polaris RZR, Yamaha, Honda, Can-Am, Kawasaki, and most ATVUTV models using standard-diameter handlebars or cage bars. NOT compatible with oval or square-profile bars or bars over 1-14 diameter. Questions about your specific model Message us with your bar measurement and we will confirm fitment within 12 hours..

Sturdy bracket Strong aluminium alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber High quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Simplifies the installation of Nilight off road LED light bars onto the roof rack, roll cages bull bar or head rack of your ATV, UTV and trucks. Wide application Can be used on tubes of 1, 1-12, 1-34 2 In diameter and applied to LED light bar for almost all kinds of vehicle. Easy installation Pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 2Pcs LED light bar mounting bracket. 2 Years Warranty Honored by Nilight..

Single Bolt Hinge Design Installation is a breeze with 1 screw to hold it in place. The light bar mount can be securely fastened to the roll cage on any terrain. Includes two allen wrenches for you to install and remove. Heavy-Duty Clamp Mounts The light bar mounting brackets are crafted from sturdy 6061-T6 aluminum alloy, CNC machined, with III grade hard anodized surface to ensure resistance to oxidation and corrosion, even in the most challenging environments. Rubber Ring Inserts Including 4 sizes of anti-slip TPU rubber ring inserts in 0.87522.2mm125.4mm1.12528.6mm1.2632mm. when the rubber ring insert is removed the light bar clamp mount diameter is 1.37534.9mm. Thickened Base The base of led light bar mounting brackets are thickened to 0.4712mm. Sturdy and durable, excellent load-bearing capacity. Wide Compatibility Light bar tube mounts base hole is 0.3910mm in diameter, compatible with a wide range of light bars and motorcycle flags, which means you can mount anything on the roll cage mounts as long as it can be inserted into the 10mm base hole. Multi-purpose The led light mounts can be widely used for 0.87511.1251.261.375 diameter handlebars, bull bars, roof racks, tubular bars, roll cages or any round bars on motorcycles, bicycles, ATVs, UTVs, boats, jeeps, trucks. More Size Options You can insert 1.26 rubber ring into 0.875 or 1 rubber ring, and cut and combine different diameters of rubber ring inserts according to your needs to be compatible with 0.78720mm0.7519mm0.718mm roll cage. Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

1. WIDER FIT RANGE 1.75 TO 2.25 INCH BARS These extended-fit mounts accommodate thicker roll cages that standard brackets cannot handle. Compatible with 1.75, 2.0, and 2.25 diameter tubes on Jeep JLJT sport bars, Ford RaptorTacoma roof racks, Polaris RZR XP roll cages, and Can-Am Defender bars. A Upgrade if your vehicle has oversized tubing.. 2. 20 LOCKING POSITIONS WITH 18 INCREMENTS Get laser-precise aiming with twice the adjustment resolution of standard mounts 20 positions vs. typical 12. Each click locks firmly into place so your lights stay pointed exactly where you set them no drifting on bumpy trails. Ideal for ditch lights, camp lighting, and precision work illumination.. 3. 30 THICKER ALUMINUM CNC-machined from 6061 aluminum that is 30 thicker. The 3-bolt clamp design eliminates wobble at speed, while interlocking teeth prevent rotation under impact. Rated for LED light bars, cube pods, and work lights up to 50 lbs combined weight.. 4.TOOL-FREE SETUP IN MINUTES Includes hex wrench for bolt-tightening right out of the box. No drilling required for most installations on standard roll bars. 10mm dia hole for light mounting. For custom or oversized light bases, minor hole enlargement may be needed check your light mounting footprint against the bracket bolt pattern before purchase. Works with Baja Designs, KC Hilites, Rough Country, and most major LED brands.. 5. ENGINEERED FOR YEAR-ROUND OFF-ROAD USE Black anodized finish resists scratches, chips, and corrosion from salt, mud, and harsh UV. Backed by ZIDIYORUO's commitment to quality UTV accessories. Join thousands of riders who trust our mounts for their daily driver and weekend warrior builds alike..

Strong Hold Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road. High Compatibility Can be used on the hood or roof to mount any side-mounted light bars, straight or curved, single row, double row, triple row, or quad row. All works well and still remain ample room to adjust the mounting angle of the light. Dual Mounting Functions Directions Can be used as a whole to mount side-mounted light, or remove L shape bracket, just use the magnetic base to mount bottom-mounted light. For the L shape bracket, you can also choose to mount them inward or outward. Easier Mounting No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please check the 9th picture on the left. Package Include 2 x magnetic mounting brackets with sucker base.

Sturdy Bracket High-quality aluminum alloy material and advanced production process, the mounting bracket is impact resistant and anti-corrosion. UNIVERSAL Fits most standard vehicle license plates and auxiliary lighting systems with front license plate holes. Easy Installation no drilling, no modification required, just like to replace a license plate using its mount location, usually can be installed in 20 minutes. Wide Application Fits for almost all cars, Jeep, truck, Pickup, SUV, 4x4, etc. Work with most off road Auxiliary lights, fog lights, driving lights, LED work lamp and LED light bars. Package Includes 1PCS Universal License Plate Mount Bracket. 2 Years Warranty Honored by Nilight.

Fitment Polaris 2017-2020 Ranger XP1000, 2013-2018 Ranger XP900, 2016-2020 Ranger XP570. MATERIALMade of high quality steel with precision laser cutting and press forming. Black powder coating on the surface that is wear resistance and corrosion resistance, scratch resistance and long service life. FunctionThis bracket used with 50 inch and 52 inch LED light bar Curved or Straight . It can be mounted in the right place on your UTV's pro-fit cage. InstallationEasy to install without drilling or cutting, bolt connection installation. Fit the bracket to the pro-fit cage and tighten the screw, it will not loosen even driving on the rough road. Package Includes One pair of mounting bracket and necessary hardware 6 screws, 6 rubber pads . Not include LED light bar.

The bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roof racks, roll cages, bull bars, head racks, roll bars, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation.

Wide Adjustment Range The light mount brackets are equipped with a 8mm hole, compatible with a variety of light bars or led lights and provides a 48mm range of adjustment, allowing you to flexibly adjust the installation position of light bar. Solid and Durable Material The utv light bar mount is constructed from sturdy 6061-T6 aluminum alloy, CNC machined, the light bar clamp is finished with III grade hard anodized surface. Sturdy and durable, resistant to oxidation and weathering. Single Bolt Hinge Design Simple to install with only 1 screw to hold it in place. The screw that secures the light bar mounting brackets have 2 pressure washers for a stronger hold on the roll cage. Tool comes with two allen wrenches for easy installation and removal. Anti-slip Rubber Ring Inserts Includes 4 sizes of TPU soft rubber ring inserts 1.538.1mm1.7544.45mm1.8546.99mm250.8mm, when the rubber ring insert is removed the roll bar mounts diameter is 2.153.34mm. Universal Compatibility The light bar mounting brackets can be widely used for 1.51.751.8522.1 diameter bull bar, roof rack, grille guard, tubular bar, roll bar or any diameter round tubes on ATVs, UTVs, boats, jeeps, trucks, off-road vehicles and etc.. Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Nondestructive Installation - With these led hood light mounts, you can add more lights on your machine without drilling or modification.. Durable Construction - The whole led hood light bracket is made of 304 high-quality stainless steel, with black paint on the surface, which does not fade and scratch easily, making your car look attractive.. Anti-scratch Rubber - The part of the led light mounts in contact with the surface of your car paint are wrapped in rubber, which is non-slip and protects your car paint from scratches.. Adjustable Brackets - These led hood light mounts can be adjust up and down 180 degree, left and right 60 degree, in order to find a best angle for you.. Universal Application - Our led light brackets can be mounted to bumper, hood or any other flat surface with thickness less than 8mm, apply to trucks, van, sedan, pickups, SUV, etc.. 10mm Hole - 10mm mounting hole can meet the installation of most led lights in the market, compatible with most LED light pods, led work lights, led light bar, fog lights, driving lights, etc..

Durable Material Made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather.. Free Adjustability Youre able to freely adjust 180up and down and 60left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle.. No Drilling Anti-slip Design No drilling is required, just clamp the kit and tighten up. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood.. High Compatibility Can used to mount different thickness of work lights, fog lights, driving lights etc. As only the max limit of the clamp board thickness on the vehicle is within 8mm.. Package Include 2 x 304 stainless steel brackets Lamp is not included., 2 x hex Allen wrench..

Rugged Metal Construction The LED light base mounting bracket boasts an all-metal structure, renowned for its durability and exceptional waterproof capabilities. It remains rust-free and deformation-resistant even under prolonged exposure to heavy rain and ultraviolet rays. A thickened, full-coverage rubber protective cover enhances shock absorption, safeguards contact areas from scratches, and preserves your car's paintwork.. Versatile Adjustability Equipped with two adjustable points, this bracket offers 180 vertical adjustment for precision lighting angles and 60 horizontal adjustment for fine-tuning your desired light direction. Adjust to your specific needs, ensuring optimal illumination in every situation.. Universal Compatibility Compatible with a wide range of vehicles, including cars, SUVs, trucks, dirt bikes, ATVs, UTVs, pickup trucks, and more, this light bar holder is designed for small bottom-mounted LED work lights. Its non-slip, stable design seamlessly fits almost all light strips, making it the perfect accessory for your ride.. Easy Installation Installation of LED strip lights with this mounting bracket is a breeze, requiring no drilling. Simply open the front cover, determine your preferred installation location, secure the three bottom screws, and attach the light to the bracket. Ensure a tight fit to prevent bulb shaking and enhance your car's lighting capabilities.. Product Specifications Your purchase includes 2 light bar mounting brackets and 2 Allen keys. The bracket base measures 2.1655mm in length, with a maximum mounting thickness of 0.359mm and a hole diameter of 0.3910mm, accommodating various installation requirements..

Strong Hold Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held even on emergency braking or driving on the rugged mountain road.. Anti-scratch The magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation.. Multiple Mounting Functions You can use a single magnetic base separately to mount small led work light, or use two or three together to mount a longer bottom-mounted LED light bar.. Easier Mounting No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please the 7th picture on the left.. Package Include 2 x magnetic mounting base, 2 Years Warranty Honored by Nilight.

BRIGHT WHITE LIGHT Made of high-quality LED chips and PC lens with high light transmittance, the light bar can efficiently light up the dark road.With IP67 waterproof rate, the light bar can effectively resist water and dust, avoiding moisture and condensation.. ADJUSTABLE MOUNTING BRACKET The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.The sturdy side mounting bracket can firmly fix the light bar. It is quakeproof when passing through rugged terrain.. 16AWG WIRING HARNESS Universal fit compatible with all automobiles boats and devices equipped with a 12V power source,Circuit Protection Power relay-safety protection and conversion circuit Blade fuse protects the circuit when overcurrent or short circuit occurs. FITMENT TYPE Specially designed for JK 2007-2017 for easier light mounting. Upper windshield is to install 52 light bar, while the lower windshield is to install bottom-mounted small led pod lights, remains ample to adjust.. Package included1 x 52Inch 300W LED Light Bar,2 x 4Inch 18W LED Light Bar ,1 x Windshield Frame Mounting Bracket and 16AWG Wiring Harness,2 Years Warranty Honored by Nilight.

Sturdy and Durable The light bar mount is made of sturdy 6061-T6 aluminum alloy, CNC machining and III grade hard anodized surface finishing. Waterproof, rust resistance and oxidation resistance in harsh environments. Secure Adjustable The light bar clamp can be adjusted to fit tubular bar bull bar roll cage crash bar bumper from 35 mm1.38 to 62 mm2.44 in diameter. Anti-slip Wear resistant Comes with soft serrated shaped anti-slip TPU rubber insert to protect your bumper and prevent scratches to the roll cage surface. Versatile Compatibility The roll bar mount is equipped with M6M8M10 holes to be compatible with a wide range of lights such as spotlight, fog light, driving light, turn signal, work light, chasing light. And also you can use it to mount cameras, light pods, rear view mirrors and more. Wide Application The light bar mount can be installed without drilling on motorcycle shock absorbers, ATV UTV roll bars, off-road bumpers, etc.. Universal Compatibility The light bar mounting bracket can be adjusted vertically and horizontally to to reach vertical and horizontal angle of installation and fit on diameter 125.4 mm roll bar light mount. Please Note Pack of 2. Before purchasing, please measure the diameter of your tubular bar to ensure the roll bar mount will fit your round bar.

Sturdy bracket strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Wide application can be used on tubes of 1, 1-12, 1-34 2 in diameter and applied to led light bar for almost all kinds of vehicle. Easy installation pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 4 PCs led light bar mounting bracket, 2 Years Warranty Honored by Nilight.

Fits SizeCan be used on tubes from 2.87inch to 3.2inch, the holes for mount lights is perfect for whip lights with M12 or 12 screws, also suitable for screws with a MIN diameter of M8 needs washers for firm installation.. Premium QualityPrecision-welded from cast heavy duty 6063 aluminum with outdoor powder coated finish, suitable in hash environment, like salt, snow, rain, storms, withstand extreme weather, better for anti-shock, heat-resistant and anti-corrosion, resists rust and dirt, really durable tube mounting bracket.. Anti-Slip ProtectionThe internal sides are designed with anti-slip tooth, which can firmly grip the mount, making the bracket hold the whip lights or light bar firmly, meanwhile avoid your lights from being damaged, comes with the rubber inserts dempen, help dampen vibrations during off-roading and protect your bull bar from being scraped.. Wide ApplicationThis Mounting Clamp Set is perfect for creating unique mounting points on bumper bars, ATV, UTV, RV, truck, boats, tractor, quads, motorcycl, 4x4 offroad, farm vehicles, and roof racks, test tubes, anti-collision Rod, roll cage etc. Can work with most whip lights, Work Lights, Fog Lights, Driving Light, LED Light Bar.. Easy installationTube bracket clamps is easy and direct installation, no drilling or welding required, and it is not damage to the vehicle surface. Achieve adding more lights to the vehicle without drilling holes. 2 Years Warranty Honored by Nilight..

1. Optimal Lighting Positioning - Off-Road Light Bar Mount and Cube Light Bar Mounts feature a 360 angle rotation for customized Motorcycle and ATVs lighting angles to meet all your off-road needs. Fits 0.75-1.5 bars. 2. Rock-Solid Stability - Hang tough on even the roughest rides with our durable mount designed to secure a variety of lighting options.. 3. Easy Installation - This motorcyle ATVs Bars Size compatible mount includes an Allen key to make your installation process a snap. 4. Built to Last - Constructed with 6063 aluminum alloy materials, our LED Light Bar Bracket was built to withstand tough off-road conditions and provide long-lasting use.. 5. Perfect Fit - Ideal for use with motorcycle ATV and other bars sized from 0.75-1.5, our secure mount option will effortlessly hold your light bar in place, no matter where your adventure takes you.

Application- Compatible with most Single-Row LED light bars on the market, 18W, 30w, 50w, 80W, 100W, 150W, 200W,250W, etc Good for both straight or curved LED light bar up to 51 250W. More Choices- You can choose the higher brackets M6 holes or the lower brackets M8 holes to install the light bar, according to your needs, they are good for more varieties of LED light bars ranging from M6 14 inch to M8 51 inch screw. Adjustable Bracket- The light bar can be adjusted to 360 degrees, which makes changing direction of light beam easier. Easy To Install- Mounting the brackets on your LED light bar and tighten anti-loose screws, don't need to worry about fall down and shaking. Package Includes- 4PCs side-mounted bracketslower brackets higher brackets.

Fitment Fit RZR XP 1000 and RZR XP 4 1000 2014-2023,Fit RZR 900 2016-2023, Fit RZR-S 1000 2016-2023. Superior Material Upper windshield mounting brackets are laser and CNC formed,powder coated,strong and waterproof for a long severice life.. Easy Installation Just directly use the stock holes to install, no drilling or modification is required. CAD designed laser cutting to ensure proper fitment. For 32 Light Bar Provide secure and reliable way to mount 32 LED light bar to the roof, improved illumination for safer night driving. Package include 1 Pair mount brackets, come with mounting bolts .not includes LED light bar.

POWERFUL AMBERCLEAR LED LIGHT BAR 15-inch octagonal mini strobe light bar with 56 ultra-bright amber and clear LEDs for maximum visibility in all weather conditions.. 10 FLASH PATTERNS FOR SAFETY Choose from 10 selectable strobe patterns to alert traffic and improve safety for snow plow trucks, work trucks, pickups, and utility vehicles.. FLEXIBLE MOUNTING OPTIONS Heavy-duty magnetic feet allow quick installation and removal, or use the included permanent mounting studs for a secure fit on trucks and trailers.. DURABLE EMERGENCY LIGHTS SAE J845 Class 1 certified for professional use built tough for construction lights, service truck accessories, and emergency vehicle applications.. EASY PLUG IN SETUP Includes a 15 ft power cord with accessory power plug, onoff switch, and momentary flash pattern button. Backed by a 5-year Buyers Products warranty..

UNIVERSAL BRACKETS - LTEODCHEW LED light bar mounting brackets perfectly fit for LED pods and LED light bars ranging from 4 inch to 30 inch. Generally, need 1 set for light pods within 7 inch, and 2 - 3 sets for LED light bars length of 12 - 30 inch.. ADJUSTABLE BRACKETS - Our fog light mounting brackets are designed adjustable by pushing them up and down, max 45 angles to be changed. You can slide the brackets horizontally to balance the LED lights.. BUILT TO LAST - Driving light mounting brackets use durable aircraft grade Aluminum alloy material to manufacture, powder coated. And its much thicker than others in the market, won't bend. Stainless steel hardware means they can go thorough bad weather conditions and hold your LED lights still firmly.. 1 MINUTE MOUNTING - Quick out-of-the-box installation. Adjusting the directions of the light beam is a breeze, please refer to image 6.. BUY WITH CONFIDENCE - Before purchasing our light bar mounting brackets, please check again if these brackets fit your LED light bars. Package including 2pcs brackets and screws. We provide 12 MONTH good quality assurance and 24 HOUR after service..

ELIMINATES THE NEED TO DRILL Installs in your vehicle's pre-existing OEM third brake light location, preserving your cab roof and making installation quick and easy. No drilling required for Ford F-150 2015 and Ford F-250-550 2017. AERODYNAMIC LOW-PROFILE DESIGN Features a 78 in. low-profile mounting surface for improved aerodynamics and a sleek look. One-piece aluminum or steel construction ensures durability and a secure fit for your light bar or beacon.. QUICK AND EASY INSTALLATION One-piece construction allows for fast setup. The mount bolts into OEM third brake light holes, and your brake light screws back into place. Compatible with aluminum cabs not for trucks with OEM strobe or LED brake lights.. STURDY 30 LB CAPACITY 22 in. long by 10 in. deep mounting platform is pre-punched to fit a wide range of mini-light bars and beacons. Lightweight 316 in. aluminum construction with black powder-coated finish for lasting performance.. MADE FOR FORD PICKUP TRUCKS Designed specifically for Ford F-150 2015 and F-250-550 2017. Choose aluminum for bolt-on installation or steel for bolt-on or magnetic mounting. Not compatible with OEM strobe lights or LED brake lights..

SUPERIOR PROTECTION STABLE The 50 inch led light bar mounting brackets come with foam gaskets to protect your vehicle paint. The streamlined design of the windshield frame holds light bar firmly and stable.. HEAVY-DUTY MATERIAL Windshield mounting brackets feature all-steel metal structure with premium black powder-coated rust and corrosion protection for exceptional strength and durability.. 2 IN 1 DESIGN This front windshield mounting brackets accommodate a 50 LED light bar and 2 LED pods at the lower corners, the multifunctional design provides you with a brighter view while driving.Adds a professional and aggressive appearance to your vehicle.. EASY INSTALLATION No Drilling Required, Direct Bolt-On Installation.Perfectly match with Original Mounting Points.Note1 No Bolts or Hardware included to allow full customization. Professional Installation recommended 2 Measure light bar length before placing order. . PACKAGE INCLUDED 2 x Xprite Windshield Mounting Brackets for 50 Inch LED Light Bar Compatible with 2007-2018 Jeep Wrangler JK..

High QualityBase mounting bracket is made of black aluminum material, anti- rust and anti-corrosion, weather-proof, sturdy,Nicely powder coat black finish,great quake proof ability,raise the light bar height to help to avoid car paint damage.. PackageYou will get A pair of slide mounting base brackets, Easy installation with tools and accessories, Comes with all the necessary mounting hardware as nuts, bolts, washers, and some necessary accessories to install these brackets.. Adjustable Firmly hold the slide mounting bracket on the LED light bar use necessary hardware on the place that you want to install , such as bull bar, grille guard tube, roof racks, etc.Allow you to adjust the viewing angle freely with 70 degree rotating to ensure maximum visibility.. InstallationLED light bar base mounting bracket,apply to most slide mounted straight or curved light bars from 4 inch up to 52 inch, 18W, 36W, 72W, 108W, 120W, 180W,etc.Improve air flow for better heat elimination.. Customer Service Please contact us through your order firstly for any problems,attach some pictures so that we can confirm the issue and do solution at first time.Heartfelt customer service 365 Days Money Back Service 24 hours online heartfelt service..

DIMENSION 3.7 1.8 1.2 inch.DO NOT COME WITH LED LIGHT BARS. MATERIAL Whole body are made from heavy duty Stainless Steel painted black, rust-proof and corrosion resistance, will not break easily.. APPLICATION Perfect for most side-mounted straightcurved LED light bar in the market.. ADJUSTABLE Adjustable bracket makes changing directions of light beam easily.. KIT CONTENTS 2pcs Side mounting brackets necessary mounting hardwares.

High QualitySide Mounting Bracket is made of black aluminum material, anti- rust and anti-corrosion, weather-proof, sturdy,Nicely powder coat black finish,great quake proof ability,raise the light bar height to help to avoid car paint damage.. AdjustableFirmly hold the slide mounting bracket on the LED light bar use necessary hardware on the place that you want to install , such as bull bar, grille guard tube, roof racks, etc. Allow you to adjust the viewing angle freely with 360 degree rotating to ensure maximum visibility.. PackageYou will get A pair of side mounting side brackets and A pair of rubber pad, Easy installation with tools and accessories, Comes with all the necessary mounting hardware as nuts, bolts, washers, allen wrenches and some necessary accessories to install these brackets.. InstallationLED light bar mounting bracket,apply to most slide mounting bracket straight or curved LED light bar from 7 inch up to 52 inch, 18W, 36W, 72W, 108W, 120W, 180W,etc.Improve air flow for better heat elimination.. Customer ServicePlease contact us through your order firstly for any problems,attach some pictures so that we can confirm the issue and do solution at first time.Heartfelt customer service 365 Days Money Back Service 24 hours online heartfelt service..

Designed to be easily integrated into most existing hardtop, arch, and pilothouse designs. 10, 000 night-piercing lumens of dimmable light. Allows OEMs to avoid the overheating and subsequent damage to hardtops. Two beam patterns ensure the light goes where you need it. Easy to install.

OVERVIEW - Looking for sturdy light bar mounts for your off-road lights Then these universal led light bar brackets are the way to go. SWATOW INDUSTRIES Side-Mounted Brackets provides you with the convenience and security to position your lights and are sure to hold them in place, no matter how treacherous the trails.. HEAVY DUTY MOUNT - Thicker design High-strength materials. The 4pcs light bar mounting brackets made by stamping tech up to 3MM thickness design, to ensure high hardness more sturdy. Have fun and don't worry about breaking it. OVERCOME ANY WEATHER - Adopt powder coating process, effective against abrasion and corrosion, ensure years of use in the harshest conditions. Offer a lightweight, yet rugged, weatherproof construction to withstand the rage of the harsh, unforgiving terrain and the wrath of Mother Nature.. WIDE APPLIACTION - 2 Options of high and short bracketsM8 are available for a better fit to your light and mounting position. Compatible with almost side mounted Single Row LED Light Bars on the market, both straight lights and curved lights. Can be applied to Truck, Pickup, Jeep, Toyota, Chevy, Ram, Nissan, SUV, Offroad, ATV, UTV, SxS, Golf Cart, Boat, etc... EASY TO DO IT ALL - Equipped with 360 adjustable brackets and stainless steel mounting screws, making installation a breeze. If you have any questions, please find us Your OrderOrder QuestionContact Seller..

High-quality aluminum alloy LED light bar mounting brackets ensure durability, shockproof, dust-proof, and rust-proof performance for harsh conditions like off-road, UTV, and truck use.. Adjustable side mounting brackets allow you to achieve the perfect angle for your LED light bar or pod, ensuring optimal lighting performance on any terrain.. Compatible with most side-mounted LED light bars and pods on the market, making these light mounting brackets versatile for ATVs, UTVs, boats, and trucks.. Features an 8mm screw at the bottom installation hole for secure and stable attachment, ensuring your light bar mount stays firmly in place even on rough roads.. Designed for off-road enthusiasts, these light bar bracket mounts provide reliable support for LED light bars and pods, enhancing visibility in all conditions..

SECURE KABGARD COMPATIBILITY Attaches a mini lightbar to the Buyers Products Kabgard HeavyDuty Steel Pickup Truck Headache Rack 16 in x 7 in bracket clamps to the top rail and uses predrilled holes for quick, reliable installation. FAST CLAMP-ON ASSEMBLY Accessory bracket clamps into place and aligns with predrilled holes on the Kabgard Headache Rack includes mounting fasteners so you can securely attach your light bar in minutes without extra hardware or drilling. DURABLE POWDER-COATED STEEL Rugged carbon steel bracket features a gloss black powdercoated finish for corrosion resistance and clean style built to withstand harsh weather, road salt, and heavyduty work environments season after season. SOLD INDIVIDUALLY WITH FASTENERS Lightbar mounting bracket ships as a single unit with required hardware ideal for upgrading fleet trucks or replacing damaged mounts pair with Buyers Products mini lightbars and other truck lighting accessories. PROUDLY MADE IN THE USA Designed for a precise fit on the Kabgard Headache Rack and engineered for dependable truck accessories performance trusted by fleets and professionals who need secure light.

More Choice - Two sets of light bar brackets to meet your different installation needs. Mounting holes are all M8 516, perfect fit for all LED light bars ranging from M6 14 to M8 516 screws.. Application - The 360 degree adjustable brackets are compatible with most single row LED light bars on the market. Good for both straight or curved light bar up to 54 300W.. Solid Structure - Full iron material with powder coating and stamping process to achieve rustproof, shockproof waterproof.. Heavy Duty - 3MM thickness, Lumimotor light bar mounting brackets are thicker than others on the market, high hardness and more durable.. PACKAGE INCLUDE - 4PCS side-mounted brackets 2lower brackets 2higher brackets, Necessary Mounting Hardwares Bump protection ring, M8M6 Screw set for a strong supporting, 2 Wrench..

PROVIDE MORE CHOICES - Unlike most of 1 pair light bar bracket on the markets, we offer 2 pairs of HIGH and LOW different light bar mounts to better suit your different installation environment. OFFROADTOWN light bar mount's holes are all M8 516, and they compatible with more varieties of light bars ranging from M6 14 to M8 516 screws.. STABLE AND DURABLE - 3MM thickness solid iron construction material, thicker than almost all of the same type of bracket kits in the markets Made by stamping process, which has higher hardness, higher toughness so is not easy broken so can withstand high speed driving winds. Make your LED lights bar more stable and no vibration - even when braking suddenly or driving over speed bumps and rough mountain roads.. WIDE APPLICATION - Compatible with most of side mounted light bar and perfect for both straight or curved light bar up even to 52 inch. The universal light bar mounting brackets can be widely applied to Offroad, Jeep, 4x4, ATV, UTV, SUV, Truck, Car, Pick-up, Sand Rail, Fork Lift, Golf Cart and Boat.. EASY INSTALLTION - Completed installation accessories. 2 install ways frontreverse for different mounting application. Angle-adjustable side mounted brackets allow it to achieve lights optimal angle you need and change direction of lights easily. In addition, higher brackets has an unique embossed threads design that would engage with the raised indexing marks on the light bar to hold it in adjustment without slipping.. GET IT WITH CONFIDENCE - Package included 2pcs Higher Brackets 2pcs Lower Brackets Necessary Mounting Hardwares Bump protection ring, M8M6 Screw set for a strong supporting, 2 Wrench. Any problem about the brackets please contact us Your OrderOrder QuestionContact Seller and we provide 2 YEARS 100 quality assurance..

MORE OPTIONS - Two sets of light bar brackets to meet your different installation needs. Mounting holes are M8, perfect fit for all light bars ranging from M6 14 to M8 516 screws.. SOLID STRUCTURE - Full iron, with powder coating. The sturdy light bar mounting brackets are made by stamping process for durability and reliability in the most demanding environments.. UNIVERSAL FITMENT - Compatible with most side mounted Light Bars on the market, widely applied to Truck, Pickup, UTV, ATV, SUV, ram, honda, chevy, RZR, toyota, can-am, etc.. FREE ADJUSTABILITY - The reversible adjustable brackets allow you to adjust the viewing angle freely you like, and the 360 rotation ensures exact illumination direction and perfect lighting angle.. PACKAGE INCLUDE - 4 Side-Mounted Light Bar Brackets Necessary Hardwares for effortless installation. For any inquiries or assistance, AKD Part team is available 247 for prompt online support..

-Black powder-coated steel for ultimate durability and strength. -Easily installed No drilling or modification required. -Includes ditch light brackets and hardware to easily add on more lighting if desired.

Designed to mount lights. Could be drilled onto the backrack. Corrosion resistant. Easy installation.

Heavy-Duty Aluminium MountThe Zidiyoruo UTV Flags Bracket or Whips Mount is crafted from solid aluminium alloy, making it more durable than standard metal or steel, and capable of handling even the largest LED whips.. Secure and Stable DesignUnlike other flag brackets or LED whips mounts, the Zidiyoruo mount features internal teeth that tightly grip the bar or roll cage, providing a secure and stable holder for your flag or light whip.. Flexible 360 RotationThe flag bracket can rotate a full 360, making it an incredibly flexible and versatile accessory for any off-road vehicle.. Universal CompatibilityThis light whip mount is a perfect fit for a range of off-road vehicles, including Can Am Maverick X3, Polaris Rzr XP 1000 900, Sand RailsBuggies, SxS, UTV Polaris YAMAHA, 4x4s, and Jeeps. It can be easily installed on any bar measuring 1.75 to 2.. Easy to InstallOur mounting kit includes all the necessary hardware, and installation is simple with only five screws to secure it in place. Once installed, the whip mount or flag holder will hold your flag and whip securely in place over any terrain. Please check the sizing of your roll bar prior to installation..

Heavy-duty bracket High-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion. Mounting position 4 different locationsmethods to install the off-road lights. On the bull bar, 2 Sets of mounting holes on top and 1 set in front. Note There is a possibility that the bracket holder may block some vehicles' parking sensor. In some cases, you may be able to drill additional holes on the bracket to securely mount the bracket. Easy installation No drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes. Universal fitment Fits for almost all car, Jeep, truck, Pickup, SUV, 4x4, etc. Work with most off road auxiliary lights, fog lights, driving lights, LED work Lamp and LED light bars. Package include 1Pc front license plate mounting bracket.

Multi-application The mini bar clamp is designed for a smaller horizontal tube size 0 75 1 1 25 It is applicable for roof racks roll cages bull bars handlebars on ATV UTV and trucks. High Compatibility Compatible with various types of light bar brackets the 10mm screw hole diameter fits all light with 8mm mounting screws. Perfect Fit Rubber Inserts Rubber insertsstrip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp Making installation easier and always protecting the metal from being worn down. Built With Quality Clamps are built using precision-welded cast sturdy aluminum makes it lightweight but pretty neat and durable.. Make Light Mounting Easier With the high compatible bar clamp youll hassle, free of drilling holes in your vehicle body. Simple all in one kit makes your life easier..

Brightness powerful 60w led light bar, high-quality led chips and clear PC lens, this led pod emits 6000k pure white light, effectively light up the dark road during night.. Combo beam appropriate combination of spot beam and flood beam for widespread and further distance illumination.. High-quality aluminum alloy material and advanced production process, the tow hitch mounting bracket is impact resistant and anti-corrosion.. Design for most trucks, SUVs, trailers or RVs with 2.5-3 towing hitch, create extra mounting points for these vehicles with 2. 5-3 towing hitch on the back to easily mount a pair of leading cubic pods.. package includes 2 pcs 60w led pods 1pcs tow hitch mounting bracket.

Quality Material Upgrade Finishes Made of heavy duty metal with wrinkle finishes. Can withstand heavy beat but still remain beautiful outlook. Very durable and unique. Simple Installation Identify left and right mounting brackets as pictures show, prepare a cardboard, and then follow the 4 steps in picture 5 to install. Make sure in step 4 that bracket need to be installed at where windshield ends.. Extra Protection Come with foam tape that you can use at the contact area between bracket and vehicle to protect vehicle from wear and ensure a more secure installation.. Fitment Type For 52 curved light bar mount, compatible with vehicles such as 99-06 Silverado 15001500HD, 07 Silverado Classic, 99-04 Silverado 2500, 01-06 Silverado 2500HD3500, 00-06 Tahoe, 00-06 Suburban 15002500. GMC 99-06 Sierra 15001500 HD, 07 Sierra 1500 Classic, 99-04 Sierra 2500, 01-06 Sierra 2500HD3500, 00-06 Yukon, 00-06 Yukon XL 15002500.. Package Include 2PCS mounting bracket 1 pack of self-tapping screws plus foam tape. fit type Vehicle Specific.

LIVE WITHOUT LIMITS - Don't be held back by one-dimensional bar clamps. Our unique clamping system features a 360-degree rotating neck designed to give you even more control over your light placement, regardless of the position or angle of your bars.. HANG ON TIGHT - Aggressive, straight knurling on the mounting surfaces gives your lights the traction they need to hold on through the harshest terrain. And with a zero-slip, locking stud design, these clamps wont twist when you twist the throttle.. ROCK SOLID - On the trail, there's no room for weak hardware. Engineered to be thicker and more durable than other bar clamps and equipped with rugged stainless steel bolts, these bar clamps have earned their place at the top of the podium.. UNYIELDING PROTECTION - Specially designed rubber inserts shield your lights against damaging vibrations, provide an unequaled level of light stabilization, and protect against the unforgiving conditions of the off-road.. UNMATCHED VERSATILITY - Go anywhere with a clamp that is as flexible as your machine. These clamps include adapters to fit 1, 1.5, 1.75, and 2 bars and two different length mounting neck with studs for added clearance adjustment..

DIMENSION 3.66 1.7 1.28 inch.DO NOT COME WITH LED LIGHTS. MATERIAL Heavy duty Die-cast aluminum. With anti-vibration rubber gaskets to avoid damage to your car paint, and raise the light bar height avoid scratching during driving.. APPLICATION Can perfect apply to most side mounted LED Light Bar in the market.. ADJUSTABLE Angle-Adjustable side mounting brackets allow to achieve optimal angle you need.. PACKAGE Including 2 Side Mounting Brackets 2 Rubber Pads For a Steady Installation Necessary Mounting Hardwares Bump protection ring, 8mm Screw set for a strong supporting..

The bar mount made of 6061-T6 aluminum alloy material with CNC machining and iii grade hard anodized surface for durability and reliability in the most demanding environments. Fit on 1.5''1.65''1.75''1.85''2'' tubes for ATV, UTV, truck, boat, motorcycle, off-road vehicle and farm vehicle. It is applicable for roll bars, roof racks, roll cages, bull bars, head racks, handlebars and more. Please Note Before purchasing, please measure the diameter of the mounting rail to confirm whether this clamp mount fits your rail. The tube clamp mount with 360 rotating flag hole Hole Diameter 0.5''12.7mm. Ideal for a variety of applications including whip lights, whip flags, antennas, light bars, LED off road lights and driving lights. Kit comes with four sizes of rubber ring inserts to provide a snug fit and protect the mounting surface. Rubber ring diameters 1.5 38.1mm, 1.65 41.91mm, 1.75 44.45mm, 1.85 46.99mm. The rubber ring can be increased or decreased according to the diameter of the round rails. The tube clamp have a 2 50.8mm diameter mounting hole when without the rubber ring insert. Hinged design and single-bolt locking make installation easier. An Allen key is included in the package to facilitate your installation. Color Blue, Quantity 2 PCS.

Aluminium DurableThis whip light mount is crafted from solid, coated Heavy-Duty aluminum alloy and designed with triangular reinforcing ribs at the corner. It is built to withstand tough conditions. 360 AdjustableEasily find the suitable position,The whip light brackets rotates a full 360 degrees with multiple locking points, allowing for precise adjustment of lights or flags. Easy Bolt-On Installation No Drlling Required, Installation is a breeze with the bolt-on design, making it quick and hassle-free. No drilling or modifications are needed, so you can mount it securely on your UTV roll bar with minimal effrt. AdaptabilityThe hole diameter size of the utv whip mount is about 12.2mm0.48inch, you can attach anything to kemimoto whip lights mount as long as its base size is 12mm. Fitmentkemimoto utv whip mount compatible with UTV, such as compatible with RZR 900 1000 XP Pro, compatible with Maverick x3 Commander, Talon, Mule YXZ, and the list goes on. The utv flag mount can be mounted on a 1.75- 2 roll bar.

USB Charging UTV roll bar light with USB charging will be a portable dome light, reading light, work light, etc., and easy to charge again by using USB recharging. Wide Application Self-designed UTV dome light comes with matching adjustable straps, which can be adapted to most UTV ATV Golf Cart pipe diameters ranging 1.5- 2.0 inch rods, such as UTV, ATV, Golf Cart, Car, Bike, Camp. Boat, Wheelchair, Kick Scooter, Walker, Rollator, Knee Scooter, etc. and there is no need to use additional wires or drill holes to fix. Convenient to Use The buckle-type structure of the handheld LED lamp can be quickly installed and removed. KEMIMOTO roll bar mount light designed with a strong ironwork base can be installed arbitrarily where utv dome light attracts. Besides, you can adjust the angle as you like thanks to the feature of 90-degree rotation adjustment. Two Light Modes Design This KEMIMOTO UTV interior lights own the 2 gears light source with high beam spotlight mode and low beam floodlight mode. Press once to switch the lighting mode according to the actual condition you need. Waterproof and Durable The Automotive Light Bars by KEMIMOTO have high brightness but low energy consumption, which extends the time used after charging is completed. The universal lamp has a long service life of more than 50,000 hours and is waterproof and dustproof by the structure design.

SMALLER SIZE - Ever have to jerry-rig your bar clamp over a smaller bar to make it fit Not anymore. The Mini Bar Clamp is designed specifically for bars with a smaller diameter ranging from .75 to 1 to 1.25. Mount your mini bar clamp on roof racks, roll cages, bull bars, handlebars, and more The mini bar clamp takes up less space than traditional bar clamps, allowing you to mount it in tighter spaces.. RUBBER TEETH - Unsatisfied with the grip of your current bar clamp The Mini Bar Clamp comes with multiple rubber teeth which allows the mini clamp to get a more secure grip and fit handlebars of different diameters. The rubber teeth also help dampen vibrations, stops the metal from being worn down and keeps your bars protected all the way through.. STURDY ALUMINUM RUBBER STRIP- The Mini Bar Clamp is built using precision-welded cast aluminum, allowing it to be both lightweight and durable, and easy to hang onto get it. For mounting onto the aluminum teeth directly, the mini bar clamp comes with an additional rubber strip to prevent the aluminum from being worn down.. NO DRILLING - Tired on drilling holes on your bar Us too. With the mini bar clamp, simply bolt it over your handlebars, and mount your light bar onto the clamp. It's that easy. Plus, the Mini Bar Clamp accessories kit comes with everything you need for installation.. YOUR PURCHASE. PROTECTED - We stand by our products. A lot. We love them so much we'd marry them if we could Sorry Jill. That's why every mini bar clamp comes with a 90-day return policy, 2-year warranty, and the best US based telephone support in the business. It's that good..

HIGH BRIGHTNESS FOR CLEAR VISIBILITY Lasfit Led Light bar features with 10pcs 3W OSCONIQ P 3737 LED Chips, the luminous efficiency is 99.85LMW, which has high luminous efficiency and long life. The combination of the spot and flood beam which provides widespread and long distance illumination to ensure your driving safety. You get what you pay for.. DT PLUG PORTLASFIT SUPPORT LASFIT light bars come with a standard DT plug port for easy installation with universal wiring harness switch kits FEMALE PIGTAIL WIRING HARNESS NOT INCLUDED. With 45 Days of Complete Purchase Protection and 3 YEARS of QUALITY ASSURANCE. LASFIT professional team provides you with good service in the CA. USA. EFFECTIVE HEAT DISSIPATION The aluminum housing was designed with 6 fins as heat-sink,which greatly expands the heat radiating area and the heat-dissipation efficiency is increased by 20. The brightness and the life-span of the light bar are related to the heat-dissipation. The better the heat dissipation, the better the light effect, the longer life-span of the light bar. It extends the service life of the light bar.. VERSATILE USE Our light bar is compatible with almost all off-road vehicles, including Jeeps, 4x4s, cars, trucks, motorcycles, SUVs, ATVs, and boats. It's also great for indoor and outdoor use, such as garden lighting, backyard lighting, and backup lighting.. BUILT TO LAST Our light bar is made with high-quality 6063 aluminum alloy housing, providing superior cooling for a lifespan of up to 50,000 hours. Plus, it's waterproof with an IP67 rating, so you can travel safely in any weather.. GREAT LIGHT EFFECT The Light effect related to the usage of the power. The usage of the power of Lasfit light bar is 50-70. Lasfit light bar has about 100LMW. It means that 1W can output 100 Lumen Others generally has 80LMW. In the case of the same wattage, the higher the output lumen value, the brighter the light..

Strong HoldEach magnetic base has a very strong magnet. Once it matches well with a flat surface, it is firmly secured and will not fall even during emergency braking or driving on rough mountain roads.. Anti Scratch The magnetic light bar mount comes with the soft rubber cover to prevent scratches on the engine hood and protect your vehicle.. Multiple Installation Functions You can use a single magnetic base to install small LED work lights, or use two to install longer LED light strips together... Easy to InstallInstall the led light bar magnetic mount on the base, tighten the locking screw, and then attach it to the car. No need to drill holes for fixation on vehicles and equipment.. Widely ApplicableThis light bar magnetic mount is widely used for LED work lights, driving lights, fog lights, etc. compatible with Jeep,Pickup, SUV, ATV, etc..

HIGH BRIGHTNESS Powerful 180w LED Light Bar, spot beam for long irradiation distance, flood beam for bright and broad view area.. HIGH WATERPROOF PERFORMANCE IP67 Waterproof Rate, waterproof up to 1 meter of water for 30 minutes and 100 dustproof, able to work in adverse weather.. BETTER HEAT DISSIPATION Special designed die-cast aluminum alloy heat sinks effectively extend lifespan of the light bar beyond 30,000 hours.. EASY TO INSTALL The side mounting bracket can firmly fix the light bar on its position. And come with 12ft 16AWG wiring harness kit to fit the off road, boat lighting. WIDE APPLICATION The work light can be compatible with almost all Jeeps, 4x4, Cars, Trucks, Motorcycles, SUVs, ATVs, Boats, etc. Many indoor and outdoor uses Garden Lighting, Backyard Lighting, Back-up Light, Off Road Lighting, Construction Lighting and so on..

EXCELLENT LIGHTING EFFECT Combination of bright spot and flood beam, further irradiation distance and wide range of light for broad view area. STURDY BRACKET Strong aluminum alloy, fix the light on tube firmly pre-drilled hole, allows more lights to be added on vehicle without drilling. RUBBER INSERTS High-quality rubber inserts help dampen vibrations during off-roading and protect your bull bar from being scraped. SUPERIOR QUALITY WIRES Good electrical conductivity, high temperature and melting resistant, outstanding bending performance.. PACKAGE INCLUDE 1PC 72W LED light bar, 2PCS LED light bar mounting bracket kits and 1PC wiring harness. Fit type Universal Fit,2 Years Warranty by Nilight.

SUPER BRIGHT LIGHT High quality LED chips, powerful and bright light beam, let you see the forward dark road clearly. PERFECT COMBO BEAM Excellent visual effect, spot beam for long distance illumination, flood beam for broad view area. STURDY BRACKET Strong aluminum alloy, fix the light on tube firmly pre-drilled hole, allows more lights to be added to vehicle without drilling. RUBBER INSERTS High-quality rubber inserts help dampen vibrations during off-roading and protect your bull bar from being scraped. PACKAGE INCLUDE 1PC 126W LED light bar, 2PCS LED light bar mounting bracket kits and 1PC wiring harness,2 Years Warranty by Nilight.

Fitment Compatible with 52 curved light bar mounts on specific vehicles and models. Compatibility 07-13 Avalanche, 07-13 Silverado 1500, 07-14 Silverado 2500 HD, 07-14 Silverado 3500 HD, 07-14 Suburban 1500, 07-14 Suburban 2500, 07-14 Tahoe 07-13 Sierra 1500, 07-14 Sierra 2500 HD, 07-14 Sierra 3500 HD, 07-14 Yukon, 07-14 Yukon XL 1500, 07-14 Yukon XL 2500. Improved Stable Mounts Comes with securer rivet nut mounting hardware, ensure you a more stable mounts. No worries of connection loose of leaks. Extra Protection Come with foam tape that you can use at the contact area between bracket and vehicle to protect vehicle from wear and ensure a more secure installation. Installation Follow the 5th image, test fitting and mark mounting position, drill holes and fill with silicon, insert rivet nuts and fill with silicon, align brackets to holes and then bolt on and then mount light bar to the bracket. Package Include 1 pair 52 curved light bar mounting brackets leftright, 1x hardware pack.

HIGH BRIGHTNESS Powerful 180W LED light bar, high-quality Led chips and clear PC lens, super bright white light dispels darkness.. COMBO BEAM, CLEAR VIEW Appropriate combination of spot beam and flood beam for wide spread and long distance illumination.. SIDE MOUNTING BRACKET The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain.. WATERPROOF RATE IP67 waterproof up to 3. 3 feet of water for 30 minutes and effectively dustproof.. PACKAGE INCLUDE 1PC 180W LED Light Bar and Mounting Brackets.

SUPER BRIGHT SPOT BEAM High-quality LED chips emits bright white light Concentrated spot beam illuminates to further distance and lumen is 1260LM. ADJUSTABLE MOUNTING BRACKET The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.. BETTER HEAT DISSIPATION Special designed die-cast aluminum alloy cooling fins effectively extend the lifespan to over 30, 000 hours.. WATERPROOF RATE IP67 waterproof up to 3. 3 feet of water for 30 minutes and effectively dustproof.. PACKAGE INCLUD 2PCS 18W LED Light Bars and Mounting Brackets. this product is the universal fit. It fit all the vehicles..

Fitment Type Specially designed for JK 2007-2017 for easier light mounting. Upper windshield is to install 52 inch light bar, while the lower windshield is to install bottom-mounted small led pod lights, remains ample to adjust. Upgrading reflector cup the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination. SIDE MOUNTING BRACKET The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain. High performance IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan. Simple Installation Just peel the foam tap, stick them to the bracket, mount the bracket to the windshield frame with vehicles original factory bolts, and then use the mounting hardware comes with the light bar, to install the light bar on the bracket. Note If mounting hardware size from the light bar are not same as mounting holes size on bracket, you can use washers to make them fit.

Super brightness Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency. Upgrading reflector cup the broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination. Adjustable mounting bracket the bracket can be adjusted and slid, offering convenience to adjust position flexibly when needed. High performance IP67 waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan. Package includes 1PC 20 Inch 420w LED light bar and Wiring Harness.

Smart Remote Control New Quntis monitor bar light with a sensitive remote control that integrates multifunction control. You can easily rotate to stepless dimming your preferred brightness and color temperature for various scenarios 3000K-6500K, CRI95. Just operate it all on the desktop. The ideal choice for students, designers, and office workers. Fits Most Monitors - Savior for CurvedIrregular Monitors Quntis ScreenLinear Classic Pro is designed with an upgraded weighted clip that hangs on the monitor more stable and doesn't shake. Uniquely designed front and rear double adjustment cover to fit most monitors with thicknesses from 0.12'' to 2.36''. The newly added 45 adjustable rotation angle of the shaft provides optimal light coverage. Note Our package includes two hex keys to tighten the hinges of the lamp. No Screen Glare Flicker - Easy on Your Eyes With 45 angled asymmetrical optical design, our curved monitor light bar only illuminates your desk and keyboard, enhancing immersion and focus while correctly eliminating reflective glare on the screen on both sides of the monitor lamp bar. Effectively relieving eye fatigue to protect your eyes ensure comfortable viewing while you work or relax. Auto-Dimming 2 Hr Rest Timer The built-in ambient light sensor allows you to achieve the optimal illumination level for your working environment with a double-click of the remote. Long press for 3 seconds to turn on the 2-hour auto-off timer, which will remind you to step away from the screen and take a break. Professional Eye-Caring Desk Lamp Premium Support The 20.1 inch computer monitor light bar, powered via USB, is ideal for use on curved or ultrawide monitors, maximizing your desk space. With an illuminance of 1200 lux, computer monitor light is well-suited as a home office desk lamp. Quntis Monitor Light has passed the IEC62778 anti-blue light certification standard. Welcome guide, and friendly customer support. Quntis Monitor Light Bar Focus 20.1 inch 51 cm Black.

BOLT MAGNETIC MOUNTSuitable for both magnetic and bolt mounting options, this cab mount is constructed from durable metal to securely hold your magnetic lamp. The mounting panel is pre-drilled with screw holes for bolt mounting of various models, providing customers with more choices and convenience. Extra hole Perfectly fit for flagpole light,it will make your car stand out and enhance visibility.. FLEXIBILITY DURABILITYCompatible with both steel and aluminum platesThe versatile design allows for easy customization of the installation method. Built to last, it offers exceptional durability and weather resistance, ensuring reliable performance in any conditions. Personalize your installation with flexibility and benefit from the enduring quality and weatherproof features of this strobe light mount.. MULT-PURPOSE DESIGNSpecially designed extra hole for easy installation of a whip light, providing additional lighting options and adding a unique touch to your vehicle.. ENHANCED VISIBILITY AND DRIVE SAFELY Installing a light bar on the cab mount provides added safety for activities such as off-roading, hunting, outdoor work, or driving on poorly,and enhancing your vision on dimly lit roads.Additionally,using flagpole lights and strobe lights together can provide a comprehensive lighting solution that enhances visibility, safety, aesthetics, and versatility.. DRILL-FREE MOUNT Designed to provide stability in various driving conditions, the Light Bar Cab Mount securely attaches to your Ford using the anchor plate, stainless steel screws, and factory-made brake light screws, Suitable for strobe lights weighing less than 10 lbs..

Designed for 52 Inch Curved light bar. Package includes Driver Passenger Side Brackets, Foam Gaskets, Mounting Rivets, Instruction Manual. Compatible with Jeep 1984-2001 XJ Cherokee 4WD2WD, 1986-1992 Comanche MJ 4WD2WD. Lock tooth washer recommended when mounting light bar with just one mount hole to prevent light bar from rotating. Heat sink fins on the light bar will produce whistling wind-noise at high speed. It is NOT related to the brackets or the mount position. Google search light bar wind noise to view various simple and inexpensive fixes to this problem.

Simplify installation work With our bar clamp, simply bolt it over your handlebars, and mount your light bar onto the clamp. It's that easy. Plus, 4WDKING Bar Clamp accessories kit comes with everything you need for installation.. Say goodbye to drilling Without drilling any holes in the bodywork, quickly and securely mount 4WDKING LED Light Bars or any other light bar with mounting screws to your roof rack, bull bar, roll cage, or headache rack.. Rugged Design and Durability Our Clamps is built using premium Aluminum and rubber strip keeping it strong yet lightweight as well as a polyester UV stable powder coat to reduce fade. Rubber inserts with serration for shockproof and abrasion resistance, avoid scraping bull bar surface.. Size Diversity Selection Sold in pair. Included 2 light bar tube clamps, bolts, flat washers, Allen wrench, 4 sizes of rubber inserts to fit 1inch, 1.5inch, 1.75inch, and 2inch tube diameter, these brackets can be used for effortless mounting of led pods and light bars on your roll bar, bull bar, or roof rack, headache rack, etc.. Wide applications The tube clamp brackets from 4WDKING offers a stable mounting platform and mounting flexibility.Can be used on tubes measuring 1, 1.5, 1.75 2 in diameter.Ideal for car, ATV, UTV, RV, truck, Jeep, boat, tractor, quads, motorcycle, 4x4, farm vehicles, etc..

2-pack set of universal fit side mounting brackets come with screws, nuts, accessories to install these brackets. Compatible with most Single-Row LED light bars on the market Good for both straight or curved LED light bar up to 51.5 250W. 360-degree rotation, allows you to adjust the angle freely. Good for most LED light bar brands such as iJDMTOY Off-Road, Rough Country, Rigid Industries, Auxbeam, Nilight, etc.

SUPER BRIGHT 360 VISIBILITY - Featuring SpeedTech Lights' enhancing Eclipse Optic Technology.. SAE J845 CERTIFIED - Tested Certified by a third party independent test lab. PASSED.. 30 FLASH PATTERNS - Memory recall - Choose from a variety of warning patterns and steady burn.. WEATHERPROOF - Secure, durable, weatherproof housing for harsh environments.. TDALLEYTRAFFIC ADV.CRUISE MODE - All built in features with this light bar..