Proxmark3-Powered RFID Cloning The iCopy-XS is built on the advanced Proxmark3 architecture, supporting up to 37 types of RFID cards including T5577, UID, CUID, EM4305, and NFC wristbands. The device offers fast, accurate, and reliable card cloning for a wide range of applications.. Portable User-Friendly Compact, lightweight, and designed for everyday carry EDC, the iCopy-XS includes a built-in lithium battery and keychain card storage drawer. With a simple one-button operation and voice guidance, cloning RFID cards has never been easier.. High-Speed Card Recognition Featuring high-frequency and low-frequency antenna optimization, the iCopy-XS offers long-range, stable reading and writing of RFID cards. Real-time PM3 raw output viewing allows for in-depth analysis during the card duplication process.. Built-In 16GB Storage Firmware Upgradable The iCopy-XS includes 16GB of built-in storage for saving decoded data, passwords, and more. Its firmware is upgradable, ensuring compatibility with future RFID card types and protocols, including rolling code cards like GUID and 82688310.. Versatile Future-Proof Ready for mobile use via an upcoming OTG USB masterslave mode update, iCopy-XS supports Chameleon direct connections and additional RFID tools integration. Its advanced RFID features make it ideal for security professionals, locksmiths, and RFID enthusiasts..

Copy up to 9 USB Flash drives at same time. Copy speed 2GBmin or 35 MBsecond. Supported Media USB 1.02.03.0 Flash Drive and USB device. Works as a sanitizer with Erase features.

Chip C This Key Fobs uses FUDAN Chip work with 1K 13.56MHz wireless frequency, according to the ISO14443A standard, and contains 1K bytes of readwrite memory.. Compatible - RFID IC Key fob works with KABA, SAFLOK, MIWA AND ONITY LOCKS, also compatible with RC522 and PN532 readers. Can NOT work with HID, Salto and Assa Abloy Locks systems.. Applications - The IC cards can be used in Identification Access Control Loyalty Ticketing.. Reading Distance - It's contactless with 0-2.36 inch 0-6 cm reading distance based on the reader. Reading time is 1-2ms.. Pack Pack of 50pcs..

WRITABLE REWRITABLE It's rewritable chip, and it can write in 125khz id format and H ID WG 125khz format. Suitable for making new and back-up tags.. CHIPS ATMEL T5577 compatible with other universal 125kHz tags, it doesn't have pre-programmed id number, so need to write the id on it before you read, so make sure you have the writer before you buy it.. NOTE You cannot add them to RFID locks directly. You must write data into them by a 125kHz RFID card writer before use. They are blank tags, no data inside. Can write by 125KHz RFID writercopier,CAN NOT WORK WITH ONITY SYSTEM and Proxmark3 RDV4. NOT NFC CHIP,Can't work with NFC Phone.. FREQUENCY 125kHz Sensing Distance 2.5 to 10 cm 1 to 4 inch Data Storage Life 10 Years.. MATERIAL High-Quality copper coil inside. Casing Material is ABS plastic. Waterproof Durable..

NOTE Please note it can't be read before you program the chip, it's original chip. Can work before you write on it. IF YOU ARE NOT SURE IF THIS IS APPLICABLE, PLEASE CONTACT US BEFORE PURCHASING. You cannot add them to RFID locks directly. You must write data into them by a 125KHz RFID card writer before use. They are blank tags, no data inside.. Can write in 125khz RFID format and HID WG 125khz format. Not NFC chip, can't work with NFC phone. Suitable for making new and back-up tags. Frequency 125KHz Sensing distance 1 to 7 cm 0.39 to 2.76 inch Data storage life 10 years. Chip T5577 compatible with other universal 125KHz tags.. Writable Rewritable It can be erased and written 100,000 times. Suitable for making new and back-up tags, with the 125KHz RFID card writercopier..

Multi-frequency Compatibility The rfid reader and writer assist in identifving ID cards and lC cards of different freguencies, including 125KHz, 175KHZ, 250KHz, 300KHz, 375KHz, 500KHz and 13.56MHzNoticelt can not be used with Mac, the file only fits for windows. When the computer identifies it as malware, you should exit the computer's protection software. Smart Card Reader This rfid copier can read many types of cards, including S50, S70, TK4100, EM4100, EM4200, T5577, TK4100-D, TK4168, HID, AWlD and other common cards on the market. lf you are not sure whether it is suitable, please contact us. App Connection You can use the App to operate or decode through a computer or mobile phone, conveniently output the data easily out without a cardNotice The included USB drive has user manual and installation package for computer and Android phones, please check. NFC Simulation Independent NFC simulation function, allowing devices with NFC function to simulate encrypted IC cards with one buttonNote The default language is Chinese, but you can choose English at boot time or directly select English in the system settings. Communication Interface The card reader is with low power consumption in standby mode and supports Type-C comm, making it convenient and practical. And the rfid copier is with 2.8-inch TFT color screen, which can display various card information more intuitively.

RFID Reader Writer The ChameleonUltra is not only a rfid copier, but also a rfid tag. You can use it to clone a smart card data and it can be used to test and validate the behavior of other RFID control systems, as if it is a real RFID keychain. Multifunctional Compatible The Chameleon Ultra is designed dual frequency in one device. It supports 125Khz ID cardsT5577 and EM41xx and 13.56Mhz IC cardsSemi-encrypted cards, full-encrypted cards and third generation of vulnerability card cards. Notice Please use the different sides of the device to read the 125khz and 13.56mhz cards. Smart Cards Replacement There are 8 card slots, it can simulate 8 IC cards and 8 ID cards at the same time. It means one card access all control systems in your daily life. Notice It is not a universal card, it requires original cards to copy. The included USB drive has user manual, please check. Convenient Use The shape of the rfid cloner is sleek. Its overall size is 4.5 x 2.45 x 0.75cm, very lightweight and can be carried around. And it can be used 3 to 5 times one day for more than one month when charged onceNotice The upgraded firmware is not stable yet, please do not update the firmware, the old firmware will not affect normal use. Widely Applicable Scenarios The rfid writer supports most common cards, such as residential community access card, attendance card, elevator cardfull encryption card with scrolling code is not supported and NFC bracelet, you always have chance to use it in your daily life.

Support 3 Modes Access Card, PIN, CardPIN. Provide Detail VideomanualDiagrams. 2,000 users Capacity, Full System Kits, Easily Wired by CAT-5 Cable, with 600LBS Magnetic lock. Card Type 125KHz EM RFID or proxcard II card or Key Fob, PIN length 4-8 digits.. Wiegand 26-37 bit input output, can be programmed.. Protective Properties IP65 fully-potted, Waterproof Outdoor Use or in-Door Install.

What You Get The package includes 1pcs 125KHz handheld RFlD writer, 5pcs writable keyfob and 5pcs writable cards. Notice using the RFID reader needs two 1.5V AAA batteries and the batteries are not included in the package. RFID Reader Writer The card and in the combination are the default empty command products. To test readwrite functions, first copy data from free labels using a replicator, then write it into cardskeychains before replacing the use of. Portable RFID Reader The rfid copier is designed small size and light weight, it is convenient for flow of work, no need to connect to a computer, on-site copy. Copiers can write multiple types of cards, including T5577, EM42054305, EL82658268, SIC7888. Purchase Notice If your product is EM4100, EM4305, or TK4100 with the same frequency but different cards, please confirm the card before buying. The machine can copy parking cards, access cards, switches cards, including small button-type, shaped cards. Proximity cards are reusable. Default blank chips require writing by first reading your 125kHz device's instructions before transferring to key chainscards. Note This smart product requires pre-writing low-frequency data from your original device unusable directly. Replicator enables multi-use cloning of single-copy cards. Any questions, please contact us.

Multi-Frequency Compatibility for Universal Use Supports a wide range of RFID frequencies 125kHz, 250KHz, 500KHz, 625khz, 750kHz, 875KHz, 1000KHZ,13.56MHz ISO14443AB, Works with most access control, elevator, parking, and attendance cards, including common HID Prox, EM4100, T5577, and UID cards.Notice When cracking the 13.56MHz encryption cards, you should connect the reader to the computer. Easy Card Cloning with Smart Operation Clone compatible RFID cards in seconds Press SCAN to auto-detect card frequency or manually select it with the MODE button. Comes with free PC software Windows for advanced functionsespecially required for 13.56MHz encrypted card operations. If you aren't sure your card whether can be used, please contact us before purchase.. Complete Starter Kit Package includes 1x RFID readerwriter, 1x USB cable, 5x T5577 keychains, 5x T5577 blank cards, and 5x UID keychainstotal 15 rewritable blanks for testing and duplication. Perfect for home, office, or small business security setups.. User-Friendly Design with Color Display Voice Guidance Features a 2.75-inch full-color screen and multi-language voice prompts for intuitive operation. Powered by USB via PC or 4x AAA batteries not includedideal for both desktop and portable use.. Important Usage Notes for Best Results Place card on the back sensing area not front. If Write Failed appears, press Write 23 more timescommon with low-power cards. For 13.56MHz operations, must connect to computer via USB. Not all encrypted or proprietary cards can be clonedcontact us before purchase if unsure about compatibility..

NOTICE This handheld copierduplicator is designed ONLY for copying 125kHz low frequency of cards. It be widely used in hotel room keys, homeapartment access, garage doors, and office doors.It can't be used with NFC, 13.56MHz, 960MHz medium or high frequency of cards or encrypted cards. To accurately confirm the compatible type of the card in your hand T5577, EM4305, or CE5200, using a professional RFID reader or tool like Proxmark3 is the most reliable method. Place the card in the device sensing area and enter lf search on the command line interface of the computer,displays T55xxEM4x05 or ID82xx or T55xx typesthose cards can be used our copier to write and copy.. Need help If you have any questions about usage of product or service, feel free to contact us, we are alaways here to assist you within 24 hours.. NoteThis machine supports EM4100,TK4100, T5577, EM4305, CE5200 and other unencrypted 125KHz Chip Types. But EM4100Tk4100 type of card or keyfob can be read, this type of blank one can't be as a copied one. T5577,EM4305 or CE5200 type can be read, also this type of blank card or keyfob can be as a copied one.. The card and in the combination are the default empty command products. If it is necessary to test readings and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and Requirements 2 knots 1.5V AAA batteries. Small size,light weight56g,convenient for flow of work, on-site copy. The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards. Can be reused, proximity cards can use an unlimited number of timesPlease note that the product chips defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding or card. Replicator features is super,forced those cards which can only copy one time to be used many times in the host.

1.The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychainRequirements 2 knots 1.5V AAA batteriesbr. 2.The product portfolio is based on the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. The combined products are compatible with the low-frequency of T5577 or hidden cardsSmall size,light weight56g,convenient for flow of work, on-site copy br. 3.Purchase Notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chip before making the purchase,The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.br. 4.Can be reused, proximity cards can use an unlimited number of timesPlease note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.br. 5.Attention Our product is a smart product that can be read and written, without any instructions, and cannot be used directly. Please write low-frequency instructions from your device before replacing it, Replicator features is super,forced those cards which can only copy one time to be used many times in the host.br.

1.The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychainRequirements 2 knots 1.5V AAA batteriesbr. 2.The product portfolio is based on the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. The combined products are compatible with the low-frequency of T5577 or hidden cardsSmall size,light weight56g,convenient for flow of work, on-site copy br. 3.Purchase Notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chip before making the purchase,The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.br. 4.Can be reused, proximity cards can use an unlimited number of timesPlease note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.br. 5.Attention Our product is a smart product that can be read and written, without any instructions, and cannot be used directly. Please write low-frequency instructions from your device before replacing it, Replicator features is super,forced those cards which can only copy one time to be used many times in the host.br. 6.Please note RFID smart products are functional products. For any functional issues with the device, you can directly contact our customer service. Our product is a smart product that can read and write without any instructions and cannot be used directly. Please write low-frequency commands from the device before replacing it. The Repligator function is very powerful and forces a card that can only be replicated once to be used multiple times in the host.br.

NOTEThe applicability of our reader is limited, it cannot match all types of FRID cards. Please read our product description carefully. If your card is not the type listed by us, or if you dont know the type of your card, please do not buy it, or you can consult me. Thanks. SUPPORT READ AND WRITE 10 FREQUENCIESSupport 125KHz, 250KHz, 375KHz, 500KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz ISO1443AB, support HID Proxy cards, etc.. MATCH VARIOUS TYPES OF CARDSCompatible with IDIC card, EM card, Mi-fare classic, UID card, T5577EM4305 card, HID 138613261346, Ntag 213215216, etc. Not support CID card.. CRACK ENCRYPTED CARDOur reader can crack most of 13.56MHz encryption cards. Please ensure that this operation must connect the reader to the computer.. COMPATIBLE SYSTEMThe software of our machine is only compatible with Windows system, not working with MAC system or Linux system..

1.The cards and keychains in the package combination are default empty command products and cannot be used directly. If you need to test read-write, please use a replicator to read the buyer's own device label instructions, and then write them into the read-write card and keychain. The replicator battery requires 2 1.5V AAA batteries.br. 2. As long as the product combination is T5577 chip, the RFID duplicator is compatible with all low-frequency RFID 125kHz smart product tags. The combination product is compatible with T5577 low-frequency or hidden cards, and the copier combination has a small volume and light weight 56g, making it easy for workflow and on-site copying.br. 3. Please note before purchasing If the buyer's product is EM4100, EM4305 or TK4100, with the same frequency but different chips, it cannot be compatible with our T5577 package card and keychain. Please confirm the chip before purchasing. The machine can replicate parking cards, access cards, switch cards on the market, including small button type and shaped cards.br. 4. Our replicator can be used continuously for copying and reading. The card and keychain in the package are readable and writable labels that can be reused. The induction card can be used infinitely. Please note that the product chip defaults to blank instructions. If writing is required, please first read the 125kHz device command and then write it into the corresponding keychain or card.br. 5. Please note RFID smart products are functional products. For any functional issues with the device, you can directly contact our customer service. Our product is a smart product that can read and write without any instructions and cannot be used directly. Please write low-frequency commands from the device before replacing it. The Repligator function is very powerful and forces a card that can only be replicated once to be used multiple times in the host.br.

1. This is a combination package of RFID low-frequency replicators. The chip of the product is T5577, which defaults to an empty instruction product and cannot be read or written directly. If you need to test it, please write the instructions from your own 125kHz device into our package product. Please note that the replicator will make a buzzing sound. If the light can be turned on, it means it can work. Due to an empty command in our product, it cannot be used directly. It requires the use of commands to read the device and write it to a card or currency card. br. 2. The main compatible chip for the product portfolio is the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. This combination product is compatible with T5577 low-frequency or hidden cards, with small size, light weight 56g, simple workflow, and allows direct copying, reading, and writing.br. 3. Purchase notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chips before purchasing. This machine can replicate parking cards, access cards, switch cards, including low-frequency places such as small button type and irregular cards in the market.br. 4. Combination products can be reused with just one command and can be replaced infinitely. Please note that the product chip defaults to blank instructions. If writing is required, please first read the 125kHz device command and then write it into the corresponding keychain or card.br. 5. Attention Our product is an intelligent low-frequency access control product that can read and write without any instructions, but cannot be used directly. Before replacing the device, please write low-frequency commands from the device. The replicator function is very powerful and can only replicate once, forcing it to be trapped in the host for multiple uses.br. 6.Please note RFID smart products are functional products. For any functional issues with the device, you can directly contact our customer service. Our product is a smart product that can read and write without any instructions and cannot be used directly. Please write low-frequency commands from the device before replacing it. The Repligator function is very powerful and forces a card that can only be replicated once to be used multiple times in the host.br. 7.The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.7.The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.Requirements 2 knots 1.5V AAA batteries.brRequirements 2 knots 1.5V AAA batteries.br.

Working frequency 125KHz 13.56 MHz, support IC ID dual frequency replication, support NFC tags. Mainly used for access control field. Can NOT work for HID cards, can NOT work for any other working frequency cards.. Obtain the software program When you connect this product to a computer, you can find a U disk come out, software is saved inside. If it doesn't displayed on your computer, you can also ask me for the software link.. Preparations for copying cardsRun software and connect reader with your PC properly, the program will show the readers model number when connect properly. Left side is 13.56MHz card IC card area, and right side is 125KHz ID card area, you have to choose the right side. In the package, Our 5 white cards can copy 125KHz cards, and 5 blue fobs are used to copy 13.56MHz cards.. Efficient high-speed USB 1.2 meters length USB transmission line connected to the device, respond immediately, no need to install a driver, quickly read the card number.. BEFORE PURCHASING You should know that copying RFID cards must under the same working frequency, and some types cards are not writable. This product is powerful enough, but it still cannot meet the reading and writing of every types of RFID cards. Please read product description carefully before purchasing. If you are not sure whether it meets your needs, please contact us before purchasing, thank you..

NOTICEThis device can only work for access control keys cards, can not match any other fields induction cards, if you know nothing about access control knowledge, DO NOT place order.. MATCH VARIOUS TYPES OF CARDSSupport IC, MF1, S50, S70, ID, TK4100, EM4100, HID26, HID35, HID37, GID64, GID50, GID40, GID32, SID64, SID50, SID40, SID32, 125KHz, 175KHz,250KHz, 300KHz,375KHz, 500KHz, 625KHz, 750KHz, 875KHz, 1000KHz, 13.56 MHz, etc.. POWERFUL DECODING SOFTWARE Our software can decode half encrypted and full encrypted IC card, all sectors data come out quickly and clearly. The software is saved inside of the device, when you connect the reader to your computer by our USB cable, you can find the software U disk, if not, just contact us for the software file.. SMART PHONE APP Run the software App on your smart phone, use our OTG unit to connect the reader with your phone, then you can decode encrypted cards on your phone at anywhere, output the decoded data conveniently. You can contact us for the Smart APP link if you need. Currently APP can only support Andr0id and Harmony OS system.. BEFORE PURCHASINGYou should know that copying RFID cards must under the same working frequency, and some types cards are not writable. This product is powerful enough, but it still cannot meet the reading and writing of every types of RFID cards. Please read product description carefully before purchasing. If you are not sure whether it meets your needs, please contact us before purchasing, thanks..

1.The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychainRequirements 2 knots 1.5V AAA batteriesbr. 2.The product portfolio is based on the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. The combined products are compatible with the low-frequency of T5577 or hidden cardsSmall size,light weight56g,convenient for flow of work, on-site copy br. 3.Purchase Notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chip before making the purchase,The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.br. 4.Can be reused, proximity cards can use an unlimited number of timesPlease note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.br. 5.Attention Our product is a smart product that can be read and written, without any instructions, and cannot be used directly. Please write low-frequency instructions from your device before replacing it, Replicator features is super,forced those cards which can only copy one time to be used many times in the host.br.

1.The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychainRequirements 2 knots 1.5V AAA batteriesbr. 2.The product portfolio is based on the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. The combined products are compatible with the low-frequency of T5577 or hidden cardsSmall size,light weight56g,convenient for flow of work, on-site copy br. 3.Purchase Notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chip before making the purchase,The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.br. 4.Can be reused, proximity cards can use an unlimited number of timesPlease note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.br. 5.Attention Our product is a smart product that can be read and written, without any instructions, and cannot be used directly. Please write low-frequency instructions from your device before replacing it, Replicator features is super,forced those cards which can only copy one time to be used many times in the host.br.

1. This is a combination package of RFID 125khz low-frequency replicators. The chip of the product is T5577, which defaults to an empty instruction product and cannot be read or written directly. If you need to test it, please write the instructions from your own 125kHz device into our package product. Please note that the replicator will make a buzzing sound. If the light can be turned on, it means it can work. Due to an empty command in our product, it cannot be used directly. It requires the use of commands to read the device and write it to a card or currency card. br. 2. The main compatible chip for the product portfolio is the T5577 125khz chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. This combination product is compatible with T5577 low-frequency or hidden cards, with small size, light weight 56g, simple workflow, and allows direct copying, reading, and writing.br. 3. Purchase notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chips before purchasing. This machine can replicate parking cards, access cards, switch cards, including low-frequency places such as small button type and irregular cards in the market.br. 4. Combination products can be reused with just one command and can be replaced infinitely. Please note that the product chip defaults to blank instructions. If writing is required, please first read the 125kHz device command and then write it into the corresponding keychain or card.br. 5. Attention Our product is an intelligent low-frequency access control product that can read and write without any instructions, but cannot be used directly. Before replacing the device, please write low-frequency commands from the device. The replicator function is very powerful and can only replicate once, forcing it to be trapped in the host for multiple uses.br. 6.Please note RFID smart products are functional products. For any functional issues with the device, you can directly contact our customer service. Our product is a smart product that can read and write without any instructions and cannot be used directly. Please write low-frequency commands from the device before replacing it. The Repligator function is very powerful and forces a card that can only be replicated once to be used multiple times in the host.br. 7.The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.Requirements 2 knots 1.5V AAA batteries.br. Compatibility with Frequency Our Access Control Card Duplicator is only compatible with 125KHz RFID cards. It cannot duplicate 13.56MHz cards. Please ensure that the card you wish to duplicate is within the supported frequency range before purchasing.. Encryption Limitations This duplicator is designed to clone unlocked or non-encrypted 125KHz cards only. It cannot copy encrypted cards. If your access control cards are encrypted, this product will not work for duplication.. Attention friends This is a combination product of RFID 125kHz and is not compatible with chips of other frequencies. Please note that the products in our combination cannot be used directly. If the buyer wants to use the product, they must use a replicator to read their device instructions and write them into the corresponding card and keychain to replace the function. Each product corresponds to one chip and cannot support compatibility with any device such as mobile phones.

1. This is a combination package of RFID low-frequency replicators. The chip of the product is T5577, which defaults to an empty instruction product and cannot be read or written directly. If you need to test it, please write the instructions from your own 125kHz device into our package product. Please note that the replicator will make a buzzing sound. If the light can be turned on, it means it can work. Due to an empty command in our product, it cannot be used directly. It requires the use of commands to read the device and write it to a card or currency card. br. 2. The main compatible chip for the product portfolio is the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. This combination product is compatible with T5577 low-frequency or hidden cards, with small size, light weight 56g, simple workflow, and allows direct copying, reading, and writing.br. 3. Purchase notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chips before purchasing. This machine can replicate parking cards, access cards, switch cards, including low-frequency places such as small button type and irregular cards in the market.br. 4. Combination products can be reused with just one command and can be replaced infinitely. Please note that the product chip defaults to blank instructions. If writing is required, please first read the 125kHz device command and then write it into the corresponding keychain or card.br. 5. Attention Our product is an intelligent low-frequency access control product that can read and write without any instructions, but cannot be used directly. Before replacing the device, please write low-frequency commands from the device. The replicator function is very powerful and can only replicate once, forcing it to be trapped in the host for multiple uses.br. 6.Please note RFID smart products are functional products. For any functional issues with the device, you can directly contact our customer service. Our product is a smart product that can read and write without any instructions and cannot be used directly. Please write low-frequency commands from the device before replacing it. The Repligator function is very powerful and forces a card that can only be replicated once to be used multiple times in the host.br. 7.The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.Requirements 2 knots 1.5V AAA batteries.br.

Read Only,can't rewritable,can't write,UID Can't change.. pre-programmed with UID,Can't rewrite.. Can't work with HID Reader.just can work with normal 125KHZ ID Reader. Could not program with Saflok System.

Original T5577 Chips,it doesn't have pre-programmed id number,so need to write the id on it before you read,SO MAKE SURE YOU HAVE THE WRITER BEFORE YOU BUY IT.. it's rewritable chip,and it can write in 125khz id format and H ID WG 125khz format. Please note it can't be read before you program the chip. can write by 125KHz RFID writercopier,CAN NOT WORK WITH ONITY SYSTEM and Proxmark3 RDV4. blue,black,yellow,red,Grey color available in our stock,if you want to customized logo,please contact with us..

1.The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychainRequirements 2 knots 1.5V AAA batteriesbr. 2.The product portfolio is based on the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. The combined products are compatible with the low-frequency of T5577 or hidden cardsSmall size,light weight56g,convenient for flow of work, on-site copy br. 3.Purchase Notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chip before making the purchase,The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.br. 4.Can be reused, proximity cards can use an unlimited number of timesPlease note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.br. 5.Attention Our product is a smart product that can be read and written, without any instructions, and cannot be used directly. Please write low-frequency instructions from your device before replacing it, Replicator features is super,forced those cards which can only copy one time to be used many times in the host.br.

1. This is a combination package of RFID low-frequency replicators. The chip of the product is T5577, which defaults to an empty instruction product and cannot be read or written directly. If you need to test it, please write the instructions from your own 125kHz device into our package product. Please note that the replicator will make a buzzing sound. If the light can be turned on, it means it can work. Due to an empty command in our product, it cannot be used directly. It requires the use of commands to read the device and write it to a card or currency card. br. 2. The main compatible chip for the product portfolio is the T5577 chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. This combination product is compatible with T5577 low-frequency or hidden cards, with small size, light weight 56g, simple workflow, and allows direct copying, reading, and writing.br. 3. Purchase notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chips before purchasing. This machine can replicate parking cards, access cards, switch cards, including low-frequency places such as small button type and irregular cards in the market.br. 4. Combination products can be reused with just one command and can be replaced infinitely. Please note that the product chip defaults to blank instructions. If writing is required, please first read the 125kHz device command and then write it into the corresponding keychain or card.br. 5. Attention Our product is an intelligent low-frequency access control product that can read and write without any instructions, but cannot be used directly. Before replacing the device, please write low-frequency commands from the device. The replicator function is very powerful and can only replicate once, forcing it to be trapped in the host for multiple uses.br. 6.Please note RFID smart products are functional products. For any functional issues with the device, you can directly contact our customer service. Our product is a smart product that can read and write without any instructions and cannot be used directly. Please write low-frequency commands from the device before replacing it. The Repligator function is very powerful and forces a card that can only be replicated once to be used multiple times in the host.br. 7.The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.Requirements 2 knots 1.5V AAA batteries.br.

MAIN FUNCTIONS This kit can achieve efficient decryption, editing, analysis, etc., and also supports functions such as card packets and one key encryption.. APP CONNECTION The card duplicator can be connected to a computer or phone for quick upgrade with just one key support for Android and for Harmony.. NFC SIMULATION Independent NFC simulation function, allowing devices with NFC function to simulate encrypted IC cards with one button.. BUILT IN BATTERY The card reader has built in 400mah lithium battery, support Type C comm and power supply, making it convenient and practical.. FULL FREQUENCY Supports ID IC full frequency band, 13.56MHz, 125KHz, 175KHz, 250KHz, 300KHz, 375KHz, 500KHz and other frequencies..

Portable Easy to Use3.2inch screen display and voice prompt,IDIC full hand,4 AAA batteries power,also can be powered by USB cable,portable to use.. Support Reading Writing 9 Frequencies125 KHz, 250 KHz, 500 KHz, 375 KHz, 750 KHz, 875 KHz, 1000 KHZ. IC card 13.56 MHz. Card.. Broadly compatibleSupported Multiple Operating Systems 98, ME, NT, 2000, XP, 2003, Vista XP x64, 2003 x64, Vista x64Linux 10.5, 10.6Win CE 5.0 embedded Compact.. NOTEIt doesn't work for fully-encrypted cards. By its decoding software, it may work for most half-encrypted cards, but not all.We hope you can confirm whether it can work for you before purchasing.. Satisfaction GuaranteeIf you have questions about the product or are not satisfied with it, please us at any time, we will provide you with a best solution. Your satisfaction is our main concern..

1. This is a combination package of RFID 125khz low-frequency replicators. The chip of the product is T5577, which defaults to an empty instruction product and cannot be read or written directly. If you need to test it, please write the instructions from your own 125kHz device into our package product. Please note that the replicator will make a buzzing sound. If the light can be turned on, it means it can work. Due to an empty command in our product, it cannot be used directly. It requires the use of commands to read the device and write it to a card or currency card. br. 2. The main compatible chip for the product portfolio is the T5577 125khz chip, and the RFID replicator is compatible with all low-frequency RFID 125kHz smart products. This combination product is compatible with T5577 low-frequency or hidden cards, with small size, light weight 56g, simple workflow, and allows direct copying, reading, and writing.br. 3. Purchase notice If the buyer's product is EM4100, EM4305, or TK4100 with the same frequency but different chips, please confirm the chips before purchasing. This machine can replicate parking cards, access cards, switch cards, including low-frequency places such as small button type and irregular cards in the market.br. 4. Combination products can be reused with just one command and can be replaced infinitely. Please note that the product chip defaults to blank instructions. If writing is required, please first read the 125kHz device command and then write it into the corresponding keychain or card.br. 5. Attention Our product is an intelligent low-frequency access control product that can read and write without any instructions, but cannot be used directly. Before replacing the device, please write low-frequency commands from the device. The replicator function is very powerful and can only replicate once, forcing it to be trapped in the host for multiple uses.br. 6.Please note RFID smart products are functional products. For any functional issues with the device, you can directly contact our customer service. Our product is a smart product that can read and write without any instructions and cannot be used directly. Please write low-frequency commands from the device before replacing it. The Repligator function is very powerful and forces a card that can only be replicated once to be used multiple times in the host.br. 7.The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.Requirements 2 knots 1.5V AAA batteries.br. Compatibility with Frequency Our Access Control Card Duplicator is only compatible with 125KHz RFID cards. It cannot duplicate 13.56MHz cards. Please ensure that the card you wish to duplicate is within the supported frequency range before purchasing.. Encryption Limitations This duplicator is designed to clone unlocked or non-encrypted 125KHz cards only. It cannot copy encrypted cards. If your access control cards are encrypted, this product will not work for duplication.. Before Purchasing Please confirm the frequency 125KHz or 13.56MHz and the encryption status of your access control cards to ensure compatibility with our duplicator. This product is intended for users with some technical understanding of RFID frequencies and security protocols..

Upgrade Chameleon V3.0 This time we have comprehensively upgraded both the appearance and performance.. Manufactured using a -new process, the complex and meticulous production process results in a more sophisticated appearance..

4. Frequency Support The RFID NFC IC card reader writer supports reading and copying at frequencies of 125Khz, 250Khz, 375Khz, 500Khz, 625Khz, 750Khz, 875Khz, 1M, 13.56Mhz IC mode. However, it does not support encrypted cards, HID cards, and power cards, emphasizing its focus on common frequency ranges.. 2. Voice Broadcast The duplicator cloner possesses a voice broadcast feature that announces the frequency, card number, and encryption status. This audible feedback provides an additional layer of user-friendly interaction with the device.. 1. Automatic Frequency Detection The handheld frequency copier offers automatic frequency detection with LED status indicator. This intuitive feature makes the device easy to operate, providing direct feedback on the process status.. 3. Compatibility Compatible with EM4305 5200 8800 T5577 -F08 UID, the UID tag writer also supports Class A and Class B cards complying with 14443 standard and cards Classics, DESFire, showcasing its wide range of applicability.. 5. Easy to Use With its induction area located at the front and bottom of the machine, the access tag duplicator simplifies the copying process. Simply align with the mother card, the readbutton for a successful read, then align the induction area with the copy button or card, the write button for a successful copy..

The world's only wireless bluetooth magnetic stripe credit card reader writer,smallest and portable. Hico and loco all Compatible 3004000 oe Three Tracks track 1,2,3 Functionsread, write and erase LED indicator, applicable and full support for ISO 7811-6 standards. Bluetooth and USB interface works with Windows OS, Android, Mac OS, iPhone and iPad. Download EasyMSR?from Google Play or App Store for Android MobileTablet or iPhone,iPad Using. Paid APPs for Android and iSOiPhone, iPad, about 20 for the EasyMSR appFree software for Windows and Mac OS..

The card and key chain in the combination are the default empty command products. If it is necessary to test reading and writing Then please use the replicator to read the complimentary label, and then write it into the readable and writable card and keychainRequirements 2 knots 1.5V AAA batteriesbr. Small size,light weight56g,convenient for flow of work, on-site copy br. The machine can copy on the market parking on cards, access cards, switches cards,including small button-type, shaped cards.br. Can be reused, proximity cards can use an unlimited number of timesPlease note that the product chip defaults to a blank instruction. If writing is required, read the 125 khz device instruction first, and then write it to the corresponding keychain or card.br. Replicator features is super,forced those cards which can only copy one time to be used many times in the host.br.

Save when you buy the 10 Pack. Small enough to fit on a key ring.

Convenient to carry30pcs 125KHz T5577 fob tagEach NFC Tag comes with a keychain iron ring that can be hung on items such as keys and backpacks, making it very convenient to carry and not easy to lose.. The chip type T5577 ID chip.Standard 125Khz ID RFID Card, Please note it can't be read before you program the chip.CAN NOT WORK WITH ONITY SYSTEM and Proxmark3 RDV4. Compatible It doesn't have pre-programmed id number, so need to write the id on it before you read. It's rewritable, and it can write in 125khz id format and H-ID WG 125khz format, can be customised to 26-bit Prox format. Compatible with T5567 T5577 EM4305.Works perfectly with HID systems and Flipper Zero. These however DO NOT work with the Keysy rfid duplicator. Material Unique ABS high-temperature resistant materialHigh temperature resistance up to 190 degrees FahrenheitNon-toxicTastelessIt is abrasion-resistantIt has good stabilityVery safe to use. Applications Hotel key card, Access control systems, time attendance system, ticketing, packing card.......

RFID Reader Writer The rfid copier supports various cards, including HID cards. This rfid copier allows you to easily read and write types of cards. If you aren't sure your card whether can be used, please contact us before purchase. Notice Before reading the card, please press MODE button to choose the same frequency as your original card. Or press the SCAN button to automatically identify the frequency of the original card.. RFID Copier The rfid Reader Writer enabling seamless communication between your devices when using it for access control and data transfer. It can clone most of access control card, elevator card, attendance card and parking card in the marketNote When prompted ''write failed'', please press the ''write'' button several times more. Various Card Supported The rfid reader supports frequency 125KHz, 250KHz, 375KHz, 500KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz ISO1443AB. Notice When cracking the 13.56MHz encryption cards, you should connect the reader to the computer If you aren't sure your card whether can be used, please contact us. Easy to Use The RFID copier duplicator is designed 2 power supply mode, you can use 4 AAA batteriesnot included in the package or directly connect to the computer with USB portConnect the device to the computer first, then turn on the device. And it is equipped with a HD 2.75 inch full color screen display and multilanguage voice broadcasting. Package Included 1x RFID IDIC Card Reader Writer, 1x USB Cable, 3x T5577 KeyChain, 3x T5577 cards, and 3x CUID Key Chain. The sensing area is on the back of the device, If you cannot read cards, please adjust the position and try again.

RFID Reader Writer The ChameleonUltra is not only a rfid copier, but also a rfid tag. You can use it to clone a smart card data and it can be used to test and validate the behavior of other RFID control systems, as if it is a real RFID keychain. Multifunctional Compatible The ChameleonUltra is designed dual frequency in one device. It supports 125Khz ID cards and 13.56Mhz IC cardsSemi-encrypted cards, full-encrypted cards and third generation of vulnerability card cards. Notice Please use the different sides of the device to read the 125khz and 13.56mhz cards. Smart Cards Replacement There are 8 card slots, it can simulate 8 IC cards and 8 ID cards at the same time. It means one card access all control systems in your daily life. Notice It is not a universal card, it requires original cards to copy. The included USB drive has user manual, please check. Convenient Use The shape of the rfid cloner is sleek. Its overall size is 4.5 x 2.45 x 0.75cm, very lightweight and can be carried around. And it can be used 3 to 5 times one day for more than one month when charged onceNotice The upgraded firmware is not stable yet, please do not update the firmware, the old firmware will not affect normal use. Widely Applicable Scenarios The rfid writer supports most common cards, such as residential community access card, attendance card, elevator cardfull encryption card with scrolling code is not supported and NFC bracelet, you always have chance to use it in your daily life.

Quantity Package contains 1pcs handheld 125KHz RFID writer and 10 pcs T5577 blue keyfobs, the card reader is in a mini handheld housing for easy portability. Note The 10pcs T5577 keyfobs included in the package are the default blank command product, without pre-programmed card numbers, you cannot directly add them to RFID locks or use a card reader to read them. Before using, please write datacard numbers into them by a 125kHz RFID card writer first.. Application 125KHz handheld duplicator support writing T5577, EM4305, CET5200 and all the T5577, EM4305 compatible cards, can be duplicated 20,000 times, the keychains and cards reading and writing distance of 2.5 to 6cm. Note 125 KHz only This handheld copierduplicator is designed exclusively for duplicating 125 KHz low-frequency cards, such as thin ID cards, thick ID cards, and key fob cards. It is not compatible with NFC, 13.56 MHz high-frequency cards IC cards, CPU cards, encrypted access control cards, 960 MHz cards, or cards operating at other frequencies, nor is it compatible with encrypted cards.. Purchase Notice Ensure that the 125KHz handheld RFID writer supports the type of keyfobs cards and protocol you are using, such as the common protocols EM4100T5577EM4305, etc. to avoid non recognition, The machine can replicate parking cards, access cards. The 125KHz handheld RFID writer needs to be fitted with 2 x 1.5V AAA batteries before use, note batteries need to be purchased separately.. Chip Our products are equipped with an advanced chip with higher operability, stability and reliability, This T5577 chip is responsible for all core functions to ensure the accuracy of data reading and writing.. Important note for customers Our standard 125kHz copier works reliably with EM4100 and some basic HIDAWID cards typically 26bit open format. However, many HID and AWID cards use proprietary encoding, longer bit lengths 37bit, 44bit, etc., or encryption e.g. Corporate 1000, these cards cannot be cloned by any generic lowcost writer. If your card fails to copy, it does not mean the copier is defective it means your card has advanced security features that require specialized equipment. Please check your cards format or consult us for compatibility..

3.2inch HD color screen display, English voice, 4AAA batteries poweredNot included in order, easy to carry, simple operation.br. Muti-frequency Multi frequency read and write, including IC or ID changeable card.br. It can used to copy low level IC ISO14443A encrypted access control card by using our decoding software. But higher level encryption card like hotel card, credit card, bank card...can not be copied.br. We provide some keys, and card for you to copy. Before using the them, please note the frequency of them is ID or IC..br. If you are not sure if your card can be copied, please contact with us before buying the copier, avoid to wasting your time.br. Package Included 1pcs RFID IDIC Card Reader Writer, 1pcs USB Cable, 5pcs T5577 KeyChains, 5pcs T5577 cards, and 5pcs UID Keyfobs,5pcs t5577 keyfobs. The sensing area is on the back of the device, If you cannot read cards, please adjust the position and try again.

Support ID Frequency125khz175khz250khz300khz375khz500khz etc. Only Supports IC Frequency 13.56mhz. CAN NOT used with Mac, the file only FIT for windows.The default language is Chinese, but you can choose English at boot time or directly select English in the system Settings.. The blue card is 125kHz tags and the white T557 125khz H-ID Cards are blank tags, they Can Not be read and write directly,you need write data into them first and then copy it with a 125KHz RFID card writer.The blue 13.56mhz uid keyfobs the pattern one is IC copy cards, can be read and write directly. All cards can be writable and Rewritable.. Support Most Blank Copy Cards which incldued UidFuidCuidZxuidEuidIcuidE5500E5550T5577Em4305El82655200620072008200. If you are not sure whether it is suitable, please contact the seller directly.. NOT SUPPORT IC MF1 S50 TK4100 EM4100 etc. Supported IC, MF1, S50, ID, TK4100, H-ID26, H-ID35, H-ID37, 125KHZ-13.56MHZCan decode certain T5577-based encrypted cards with manual software on Windows PC advanced users only.NOT compatible with MF1 S50, EM4100, TK4100, or other secured access cards.Default language Chinese. English available in system settings.Windows PC required for software operation. Not compatible with macOS.. HOW TO DECODE A ENCRYPTION CARD when connect with PCthere is a DISCLAIMER At this time, do not press the OK button or any button on the Reader machine. Enter my computer, Find the removable disk and copy software exe that with RED Logo to another flash drive of your PC. Double-click to open the software, it shows USB connecting, and clik the Start on your screen. it will take about 1-3 minutes. When it shows Deconding is succcessful, replace a blank card, then press WRITE to copy it..

RFID Reader Writer The rfid copier supports various cards, including HID cards. This rfid copier allows you to easily read and write types of cards. If you aren't sure your card whether can be used, please contact us before purchase. Notice Before reading the card, please press MODE button to choose the same frequency as your original card. Or press the SCAN button to automatically identify the frequency of the original card.. RFID Copier The rfid Reader Writer enabling seamless communication between your devices when using it for access control and data transfer. It can clone most of access control card, elevator card, attendance card and parking card in the marketNote When prompted ''write failed'', please press the ''write'' button several times more. Various Card Supported The rfid reader supports frequency 125KHz, 250KHz, 375KHz, 500KHz, 625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz ISO1443AB. Notice When cracking the 13.56MHz encryption cards, you should connect the reader to the computer. Easy to Use The RFID copier duplicator is designed 2 power supply mode, you can use 4 AAA batteriesnot included in the package or directly connect to the computeronly supports windows OS with USB portConnect the device to the computer first, then turn on the device. And it is equipped with a HD 2.75 inch full color screen display and multilanguage voice broadcasting. Package Included 1x RFID IDIC Card Reader Writer, 1x USB Cable, 5x T5577 KeyChain, 5x T5577 cards, and 5x UID Key Chain. The sensing area is on the back of the device, If you cannot read cards, please adjust the position and try again.

Support Media Memory Stick MS Slot Compact Flash CF Slot Secure Digital SD Slot USB Drive - one Flash Media to DVD CD Disc duplication. Disc to 3 Discs Duplication one Reader Rom to 3 discs copy. INTUITIVE LCD DISPLAY with Large easy to read LCD display allows access to all features with the use of four simple button. Multi-Session Technology Backup multiple small capacity memory cards or USB drives into two CD or DVD disc one media card to 3 discs. IMPORTANT NOTE Our Duplicators does not copy any Encrypted, Copyright, Copy Protected DVDsCDs, and Video games. Including store bought or rental discs.

Support up to 7 copies of USB Standard-A Flash Memory Drives Transfer speed Up To 35mbsec actual transfer speed depends on the USB Key. Standalone turnkey system no computer requiredNo warm-up and cool-down. User friendly interface and simple operation Real-time display of detailed information on bright LCD screen. Support all file formats, file size, and drive capacitySupport Synchronous and Asynchronous copy modes. Note This Internal USB Duplicator only supports USB Standard A memory devices that are USB-IF compliant. If you are making duplication copies by using USB devices that are not USB-IF compliant, the USB Duplicator may not function properly. The USB Duplicator will also not work with hardware encryptedprotected USB memory devices..

Make a one-to-one copy of most 125Khz RFID keyfobskeycards. Small, robust and waterproof. No battery required. Can be reprogrammed multiple times. To be used only with Keys RFID duplicator.

ONLY duplicates onto Keysy branded rewritable KeycardsKeyfobs one included.. Copy up to 4 RFID Key Fobs or Key Cards 125kHz into the Keysy Remote.. Keysy can then emulate these credentials when placed in front of RFID reader.. Save time, money and avoid dealing with the building management. Additional Rewritable Key Fobs sold separately.. NOTE If you are not sure if your key fob is compatible contact Tiny Labs before purchasing..

ONLY duplicates onto Keysy branded rewritable KeycardsKeyfobs one 1 key fob and two 2 Wristbands included.. Copy up to 4 RFID Key Fobs or Key Cards 125kHz into the Keysy Remote.. Keysy can then emulate these credentials when placed in front of the RFID door reader. Not all door readers support this function, see product details for more information.. Keysy can write any previously read key fob or card to the included Keysy oval key fob Additional sold separately.. Save time, money and avoid dealing with the building management. NOTE If you are not sure if your key fob is compatible, contact Tiny Labs before purchasing.. 100 USA-CALIFORNIA BASED CUSTOMER-CENTRIC COMPANY CUSTOMER CARE A full, hassle-free, 1-YEAR WARRANTY backs all Keysy products. You can Email our customer care, and we will answer any of your questions and resolve arising issues fast. It comes with a FULL REFUND within 30 DAYS if you have any doubts.. SECURITY - With Keysy, theres no need to share your sensitive key fob data with a third party copying service..