Comfort Efficiency The patented hexagonal design expands the contact surface between hand and handle, increasing grip efficiency by up to 14. It allows a secure hold with less effort and tension, helping players maintain control and comfort during every shot.. Material Feel Medium Softness The Original Grip offers the perfect balance between comfort and responsiveness. Its semi-soft material absorbs sweat and vibrations while providing extra friction for improved control and smoother energy transfer. Ideal for club and frequent players.. Grip Strength Stability The hexagonal pattern aligns naturally with the finger joints, promoting proper hand placement for enhanced precision, spin, and control, while reducing fatigue and risk of over-gripping.. Size Fit Length 5.25. Thickness options S 1.5 mm, M 2.0 mm. Not recommended for handles shorter than 5. If needed, the grip can be trimmed by 0.250.5 max without affecting its structure, and should always be secured with an overgrip afterward.. Installation Overgrip Use Always remove the original factory grip before installing Hesacore. Follow the video tutorial via the QR code on the package and use the provided plastic strips. For best performance, finish with a Hesatac Overgrip to lock it in place and enhance sweat absorption..

High Quality -Made of carbon steel,structure compact,special heat treatment.This clamp is durable,stable and high strength.. Efficient-The resistance strong,bite high,not easy to slip and deform.Adjust the overhead power lines,which can solve the problem of sag and tight it.. Safe Stable-Jaw with a safety device,to prevent the jump line of steel strand.. With delicate and smooth tongs,minimal damage to cable.. Widely Used-Suitable for all kinds of steel cables and cables.Applicable wire diameter4-22mm,Safe load2 Ton4408 Lb.

Comfort Performance The unique hexagonal design expands the contact surface between hand and handle, increasing grip efficiency by up to 14. This allows you to hold the paddle with less effort, reducing finger and wrist strain for a smoother, more controlled swing.. Material Feel Softest Version The Gel Grip is made from a gelatinous, adaptive material that molds instantly to your hand. It acts as a cushion on every shot, helping absorb vibrations and reduce impact stress, ideal for players seeking maximum comfort and injury prevention.. Improved Grip Strength Control Each hexagon aligns naturally with the finger joints, enhancing lateral support and helping players generate more power, spin, and precision while reducing fatigue during long matches.. Size Fit Designed with a 5.25 length not recommended for handles shorter than 5. If your handle is slightly shorter, the grip can be trimmed by 0.250.5 max to avoid affecting the hexagonal structure, and should always be secured with an overgrip afterward. Choose between Size S 1.5 mm or M 2.0 mm depending on your preferred handle thickness and comfort level.. Installation Overgrip Use Before installation, remove the original factory grip from your paddle. Follow the installation video via the QR code on the package and use the included plastic strips. We strongly recommend applying a Hesatac Overgrip afterward to secure the grip in place and improve sweat absorption..

Price For Each Standards UL, CSA Item Bus Drop Cable Support Grip Grip Style Closed Mesh Eye Style Single Mesh Length 3-12 Cable Dia. Range 0.24 to 0.32 Eye Length 3 Breaking Strength 350 lb. Material Galvanized Steel Country of Origin subject to change China.

Solid eye assemblies provide eye reinforcement at support hardware. Single eye for single hook attachment of permanent indooroutdoor cable. Made of stainless steel wire 302-304. For permanent support when cable end is available to be installed through grip. Support vertical runs to 99-feet loads to 600 pounds.

Price For Each Material Aluminum Fitting and Stainless Steel Mesh Insulated Uninsulated Uninsulated Item Strain Relief Cord Grip MaleFemale Male Liquid Tight Dust Tight Liquid Tight Cord Grip Type Straight Mesh Length 3-34 Cable Dia. Range 0.38 to 0.44 Trade Size 38 Country of Origin subject to change United States.

Solid eye assemblies provide eye reinforcement at support hardware. Single eye for single hook attachment of permanent indooroutdoor cable. Made of tin-coated bronze wire. For permanent support when cable end is available to be installed. Light duty to support service entrance cable.

Price For Each Item Strain Relief Cord Grip MaleFemale Male Cord Grip Type Straight Standards ULCSA Material Galvanized Steel Trade Size 1-14 Liquid Tight Dust Tight Dust Tight Mesh Length 9 Insulated Uninsulated Uninsulated Cable Dia. Range 0.97 to 1.25 Country of Origin subject to change United States.

Adapt to almost all your requirements We offer 4 types 28pcs of NPT wire glands, there are NPT 1418pcs, NPT 3810pcs, NPT 128pcs, NPT 342pcs in our waterproof cable glands kit, adapt to almost all your requirements of work.. High Quality The cord grips are Made from high quality nylon PA66 plastic, wildly use to cable fixing, wire splices, machinery control boxes, distribution panels, and electrical appliances etc .. Waterproof IP68 rating allows for underwater use. Resistant to salt water, weak acid, alcohol, oil, grease and common solvents. Provide long time protection for your indoor and outdoor applications.. Widely cable size range Widely cable range from 0.10-0.25inch 0.20-0.39inch 0.25-0.47inch 0.5-0.7inch cable gland assortment. Ideal cable gland box for your project needs.. Easy to install You just need to thread the cable through the cable gland then tight up the sealing nut and lock nut, the cable will be tightly fixed but no need to disassemble..

Cable pulling sock is an ideal tool use by electrician and telecommunication technicians, which greatly saves labor. When setting out in electric construction, all kinds of Wire Telecom cable Fiber cable Smooth cable can be connected through various types of paying off tackle.. This cable sock puller that we recommend to you is made of 304 steel, resistant to high temperature of 800C, and has high chemical stability, so it can be used in industrial chemical pipelines.. This cable sock puller has great toughness and excellent traction ability. The longer it is pulled, the stronger the grip.. We generally use the diameter D of the cable to determine the size of the product we need. If you are not sure which size you need, you can choose a larger model according to your needs.However, it cannot be too large. We have our own construction teams in multiple countries, we know our own products very well, and we are very happy to answer questions from buyers. We are online 24H7. Our aim is safety, professionalism, efficiency, family.

The product type is Kellems Wire Management Dusttight Grips Strain Relief 54- 73 34 Non-Insulated. It is manufactured in China. It is manufactured by WIRING DEVICE-KELLEMS.

Solid eye assemblies provide eye reinforcement at support hardware. Single eye for single hook attachment of permanent indooroutdoor cable. Made of stainless steel wire 302-304. For support when cable end is not available. Support vertical runs to 99-feet loads to 600 pounds.

Rotating Eye K-type pulling grip has a rotating eye design that helps to reduce rotational torque every time the pulling load is lowered. Galvanized Steel cable pulling grip uses a mesh structure for maximum strength. Galvanized steel mesh with full, double weave boosts overall resistance to wear tear. User Safety the wire pulling grip uses forged steel rotating eye that does not bind even when it is used with blocks or sheaves. Shoulder protectors boost abrasion resistance and help to keep the grip centered within a raceway. Application the Woodhead pulling grip finds wide application in different types of cable pulling jobs. The heavy-duty mesh grip is used for pullingplacing communication line cables, underground cables, and service lines. Specifications K-type grip with a mesh length of 32 in. has an eye diameter of 1 in. and maintains an approximate break strength of 9600lb. It works with 0.750.99 in. cable diameter.

Pulling Grip considered as an indispensable tool for electricians with small job requirements, this junior duty grip connects insulated wire bundles to pulling tape or to pull wire rope through conduit. Design made of galvanized steel wire, this pulling grip is resistant to rust and corrosion. This cord support grip features shoulder protectors that help to center the grip within a raceway, ensuring stability. Applications flexible eye of this industrial cable grip works effectively in both generous and tight spaces. It is designed to be universally applied for single cables or wire bundles. Easy-to-install the even and thin profile of the mesh cable is quick to install and serves as a reusable tool for pulling insulated conductors, bare wires, cable, fiber optic cablenylon and wire rope. Specifications flexible eye grip measures 12 in. in mesh length and works with 1.24 in. cable diameter. The pulling grip cable maintains an approximate break strength of 4100 lb..

Wire Grip bus drop cable grip attaches to most fixed structures with ease. The cord grip eliminates the use of additional hardware for cable placement. For maximum strength, this cable support grip uses single weave mesh structure. Steel Mesh Grip the locking bale cable grip is made from galvanized steel for maximum strength. This mesh support grip finds common application in light-duty cable placementrepositioning. High Durability the closed mesh grip made from galvanized steel has a top-mounted eye protector that boosts the overall stability, gripping strength, and durability. Application this grip is used with bus drop cables. The cable pulling grip is often used for cable drops associated with electrical connections, primarily indoors. Specifications the single eye cable grip has a mesh length of 4.50 in., bale length of 9 in. and maintains an approximate break strength of 1100lbs. It has a cable diameter of 0.300.43 in..

Wire Grip bus drop cable grip attaches to most fixed structures with ease. The cord grip eliminates the use of additional hardware for cable placement. For maximum strength, this cable support grip uses single weave mesh structure. Steel Mesh Grip the locking bale cable grip is made from galvanized steel for maximum strength. This mesh support grip finds common application in light-duty cable placementrepositioning. High Durability the closed mesh grip made from galvanized steel has a top-mounted eye protector that boosts the overall stability, gripping strength, and durability. Application this grip is used with bus drop cables. The cable pulling grip is often used for cable drops associated with electrical connections, primarily indoors. Specifications the single eye cable grip has a mesh length of 5 in., bale length of 9 in. and maintains an approximate break strength of 1100lbs. It has a cable diameter of 0.410.56 in..

Wire Grip bus drop cable grip attaches to most fixed structures with ease. The cord grip eliminates the use of additional hardware for cable placement. For maximum strength, this cable support grip uses single weave mesh structure. Steel Mesh Grip the locking bale cable grip is made from galvanized steel for maximum strength. This mesh support grip finds common application in light-duty cable placementrepositioning. High Durability the closed mesh grip made from galvanized steel has a top-mounted eye protector that boosts the overall stability, gripping strength, and durability. Application this grip is used with bus drop cables. The cable pulling grip is often used for cable drops associated with electrical connections, primarily indoors. Specifications the single eye cable grip has a mesh length of 6.50 in., bale length of 9 in. and maintains an approximate break strength of 1100lbs. It has a cable diameter of 0.530.73 in..

Wire Grip bus drop cable grip attaches to most fixed structures with ease. The cord grip eliminates the use of additional hardware for cable placement. For maximum strength, this cable support grip uses single weave mesh structure. Steel Mesh Grip the locking bale cable grip is made from galvanized steel for maximum strength. This mesh support grip finds common application in light-duty cable placementrepositioning. High Durability the closed mesh grip made from galvanized steel has a top-mounted eye protector that boosts the overall stability, gripping strength, and durability. Application this grip is used with bus drop cables. The cable pulling grip is often used for cable drops associated with electrical connections, primarily indoors. Specifications the single eye cable grip has a mesh length of 8.50 in., bale length of 9 in. and maintains an approximate break strength of 1100lbs. It has a cable diameter of 0.730.85 in..

Wire Grip bus drop cable grip attaches to most fixed structures with ease. The cord grip eliminates the use of additional hardware for cable placement. For maximum strength, this cable support grip uses single weave mesh structure. Steel Mesh Grip the locking bale cable grip is made from galvanized steel for maximum strength. This mesh support grip finds common application in light-duty cable placementrepositioning. High Durability the closed mesh grip made from galvanized steel has a top-mounted eye protector that boosts the overall stability, gripping strength, and durability. Application this grip is used with bus drop cables. The cable pulling grip is often used for cable drops associated with electrical connections, primarily indoors. Specifications the single eye cable grip has a mesh length of 8.50 in., bale length of 9 in. and maintains an approximate break strength of 1900lbs. It has a cable diameter of 0.821 in..

Service Drop Grip this single weave mesh grip attaches to any fixed structure with ease. Single weave mesh design offers maximum strength, eliminating the need of an additional hardware. Mesh Material service drop cable strain relief grip is made using Tinned-Bronze wire mesh that offers corrosion resistance. This pulling grip finds application in light-duty cable placement. Durability the tinned-bronze support grip has top-mounted eye protector and closed mesh design that boosts durability, stability, and gripping strength. Application wire support grip is used for the service entrance cables, and for the repositioning of any fixed or moving structures. Specifications single eye cable support with 5.00 in. bale length has a mesh length of 5.00 in. and an approximate break strength of 500 lb. It has a cable diameter is 0.300.43 in..