High-performance head protection for demanding work environments where comfort and breathability are essential. Ventilated HD Polypropylene shell increases airflow while maintaining full 360-degree impact protection. ADAPTIVE FIT SYSTEM with rear adjustment dial for easier size adjustments from 60-66cm 23.626 in. DRY moisture-wicking comfort liner with energy-absorbing foam. Fire-resistant chinstrap. Integrated accessory slots for visors and face shields. Compatible with KASK helmet accessories. EARMUFF ATTACHMENT SLOTS with standard 30mm EURO slots for attaching KASK earmuffs. Lamp clips and earplug holders included. Meets ANSI Z89.1 Type I Type II, Class C HT-LT for all around protection against impact and penetration including front, rear and sides. EN 12492 for the following clauses only Shock energy absorption capacity Clauses 4.2.1.2 - front, 4.2.1.3 - lateral, 4.2.1.4 - rear, Penetration Clause 4.2.2, Retention system strength Clause 4.2.3 and Retention system effectiveness Clause 4.2.4.

POLYPROPYLENE HD EXTERNAL SHELL Lightweight external shell with exponential better performance. Excels in impact absorption, especially at lower temperatures -30C. Resists yellowing and degradation. ADAPTIVE FIT SYSTEM A size adjustment system which integrates three components for all-day comfort. A new, double diameter dial allows for easier size adjustments from 52-63cm. Ergonomic side wings ensure a fast and secure fit against the back of the head. The patented Self Adaptive Live Hinge is the latest, self-adjusting fit technology that moves as the wearer moves. ADVANCED CHINSTRAP Eco-leather chinstrap designed with new, rear adjustment points for a more personalized fit. Accommodates wider sizes and adapts to earmuff use. Color-coded fastener indicates meeting EN 12492 standard. EARMUFF ATTACHMENT SLOTS Helmet designed with standard 30mm EURO slots for attaching KASK earmuffs. Hi-Viz nameplate for easy identification on the back of the helmet. Easy Click Visor Adapters attaches visors or face shields to helmet. Lamp clip feature that holds corded earplugs. Meets ANSI Z89.1 Type I, Type II, EN 12492, Class C all around protection against side, front and rear impacts. Shock energy absorption capacity Clauses 4.2.1.2 - front, 4.2.1.3 - lateral, 4.2.1.4 - rear, Penetration clause 4.2.2, Retention system strength Clause 4.2.3 and Retention system effectiveness Clause 4.2.4.

Non-cut and non-drip rubber edging. Additional protection. Recommended to wear safety glasses as well. 3.2 oz. Adapters included. Additional replacement adapters available SKU 35237, ASIN B017A7LPY0 suitable to attaching visors ear defenders to the helmet.

High-clarity polycarbonate face and eye shield designed to integrate with compatible KASK helmets featuring anti-fog and scratch-resistant coatings and a panoramic lens.

A device for cultivation of all available zenith visors. Easy installation. Colour Blackred.

Polycarbonate visor with visor adapters for easy connection to helmet. Compatible with KASK Zenith Series helmets.

Package Includes You will receive 2 sets of helmet visor glasses holders to securely hold your glasses and prevent them from falling, scratching, or getting lost. Sufficient quantity to meet daily needs, and multiple colors to choose from.. Practical Work Sunglasses Holder This sunglasses holder clip securely attaches to the helmet accessory slot and can hold a pair of safety glasses or sunglasses. It won't obstruct the worker's vision and allows for easy access to your glasses. Practical and convenient.. Effortless Glasses Storage This glasses clip, when installed, measures 2.1in x 1.2in x 0.6in inner diameter 0.3in x 0.8in x 1.1in, making it incredibly convenient for organizing your glasses.. Decorative Sun Visor This glasses clip fits most glasses and sunglasses, especially thicker styles its compact size and vibrant colors also make it a striking addition to your sun visor, adding a pop of color to your helmet.. Tool-Free Installation Safe and reliable, this heavy-duty spring-loaded helmet clip easily attaches to almost any helmet brim in secondsno tools, drilling, or adhesives required. Its enhanced clamping force ensures a secure hold even in harsh environments..

Ensure eye safetyProtect your eyes from debris impact, scratches, and dust. Choose between clear and tinted visors to suit your needs. Clear visors provide lasting clarity and tinted visors block UV rays to protect eyes from harsh sunlight.. Durable and reliableThe UM ULTRAMAXX's visors are made of durable and reliable polycarbonate materials and are approved by ANSI Z87.1-2015 and EN1662001 for your safety and peace of mind.. Comfortable to wearThe angle of the built-in visor can be freely rotated and adjusted according to the face shape, suitable for all face shapes, and the nose rest design allows you to wear it comfortably all day long.. Quick installationThe built-in visor can be easily attached to the helmet with visor bracket without additional tools. You can freely remove or install it according to your needs.. Premium serviceIf you are not sure if this visor matches the helmet you have purchased, you can contact us for advice..

Precision-Engineered Fit for AGV PistaGPRGPRRCorsaRace3 Helmet Dual-track sealing system eliminates wind noise ECE 22.06 certified curvature matches original visor profile 2.5mm shim kit included for micro-adjustments. Advanced Optical Clarity with UV400 Protection Multi-layer anti-reflective coating reduces 98 glare Blocks 100 UVAUVB rays 180 panoramic vision with distortion-free polycarbonate lens Optical Class 1 rating. Aerospace-Grade Impact Resistance 3D-molded polycarbonate with 8H hardness rating Withstands impacts up to 120 mph ASTM F2912-19 tested Scratch-resistant hydrophobic coating repels water and debris. Tool-Free Installation in 15 Seconds Patented quick-release pivot system Audible click confirms secure attachment Compatible with all Pista helmet generations. Motorsport-Inspired Color Customization 6 electroplated finishes including Iridium BlueGoldSilver 8-layer nano-coating prevents color fading Passes ECE 22.06 abrasion tests for long-term vibrancy.

Size Description M 55-58 cm. L 59-62 cm.

The standard for safety helmets in climbing, arboriculture, construction and other demanding work-at-height environments. Rugged ABS outer shell with 10 ventilated air intakes protected by aluminum grills keeping you cool while providing trusted impact protection where it matters most. Moisture-wicking interior padding, fast-drying fabrics and precision-adjustable harness deliver all-day comfort and a secure fit. Visor and Earmuff Adapter Attachment Points, Integrated Lamp Clips, Up Down System, Detachable Inner Padding, Anti-Intrusion Mesh, Lateral Adjustment Divider, HD EPS Internal Shell, Soft PA Nylon Headband, Advanced Lite Chinstrap. Meets ANSI Z89.1 Type I, Class C HT-LT, EN 12492 for the following clauses only Shock energy absorption capacity 4.2.1.2 - front impact, 4.2.1.3 - lateral impact, 4.2.1.4 - rear impact, 4.2.2 - Penetration, 4.2.3 - Retention system strength, 4.2.4 - Effectiveness of the retention system. Certified to EN 397.

Optimal Sun Protection Designed to provide comprehensive sun coverage, this shield protects the neck and face from direct sunlight, reducing the risk of heat exhaustion and ensuring you can work comfortably.. Universal Fit Compatible with both full and standard brim hard hats, this sun shield offers a versatile solution for workers across various industries.Universal Fit Compatible with both full and standard brim hard hats, this sun shield offers a versatile solution for workers across various industries.. Breathable Mesh Fabric Crafted from lightweight mesh material, the sun shield ensures excellent ventilation, preventing excess sweating and keeping you cool throughout the day.. High Visibility Reflective Strip Enhanced with reflective strips, this sun shield not only guards against the sun but also ensures you remain visible in low light conditions, enhancing safety on the job site.. Easy Attachment Removal Intuitively designed, UNCO hard hat sun shield can be quickly attached or detached, making it convenient for workers to adapt to changing weather conditions..

SUN PROTECTION Protects your sides, eyes, face, and neck from harmful UV sun rays and provides much needed shade for better on the job performance. With over a 17 diameter brim, this hard hat sun shade full brim will keep your visibility clear while working on the jobsite. Built tough enough to withstand all-day harsh UV rays. Keep cool with hard hat visor convenient mesh material, designed with ventilation holes which allows air to circulate.. LIGHWEIGHT At only 5 oz., you can rest assured that this lightweight design will not add heavy weight onto your head. Constructed with lightweight flexible wire piping on the brim of the shade which holds its shape if bent. Designed with a built-in stow away bag, you can fold and store this sunshade away with ease, all while keeping its shape for its next use. The built-in stow-away bag is convenient and small enough to fit in your pocket, backpack, tool bagpouch, or lunch bag for later.. HIGH VISIBILITY Dont become another statistic, stay safe and visible with our silver reflective on orange fabric. Constructed with silver reflective fabric, stitched throughout all edges to ensure visibility. This two-toned hard hat shade provides for a highly visible material that will remain reflective during the day and night, keeping you safe all day.. ADJUSTABLE One size fits all full-brim hard hats. Designed specifically for full brim hard hats with an elastic stretch band that will ensure a secure fit for any construction helmet hat or helmet hat setup.. SERVICE Our team will quickly answer all your questions and concerns about your order. WOLF products are premium stylish safety products designed by Americans with American Standard level of quality. If you have a problem, we have a solution..

To attach to a helmet, the Visor requires a Carrier SKU 39525 and Carrier Adapters SKU 39524 These required items are sold separately. Hexagonal mesh visor for KASK Plasma, Super Plasma HP series helmets. Provides protection from debris with a reinforced frame for added impact protection and durability. Compatible with corrective eyeglasses. Micro Ventilation provides airflow and breathability while resisting debris intrusion.

EFFECTIVE ALL WEATHER SUN VISOR - Helmet visor self tinting film changes colour depending on the UV light and vary with its intensity. At night, the visor will be totally clear.During the day, when it is cloudier, the visor slightly darkens and becomes light grey, still allowing a very good visibility.And it darkens when exposed to full sunlight.. CONVENIENT AND AFFORDABLE - Transitional photochromic visor film saves you from trying to jam sunglasses in your helmet which may really not designed to support.No more sunglasses, no more extra visors, no more stopping to swap them out.. EASY TO INSTALL - Photochromic helmet shield insert is a film sticker with a adhesive edge seal that fits helmets.PINLESS design.Easily and simply install it on the inside of the helmet visor.The transition tint visor film constantly adapts to light conditions without disturbing your vision or driving. NOTELight-sensing helmet visor tint film changes color gradually,not instantly.. INSTALLATION GUIDE - PLS wash your hands and find a clean dry surface, open the package clean up your helmet visor with the soft fabric, ensure that your helmet visor is clean,dry and no fingerprints or smears. To prevent scratching the visor photochromic transitional film we recommend cleaning with a light wipe of a dry microfibre cloth,not pre-moistened wipes.. NOTE - NOT Suitable for curved helmet visor use.Pre-cut edge self adhesive seals the bond between the shield visor and the photochromic anti-fog film.Easy peel-off without damage and with no glue residue left on the surface of helmet visor.The size is 27291mm,PLS confirm the size of your helmet visor before ordering..

Meets ANSI S3.19 EN 352 CSA A standardsProtects up to 22 dBWork with KASK Super Plasma Zenith helmetsAlso designed to fit helmets that accept the Peltor3M style ear muffs.

High-clarity polycarbonate face and eye shield designed to integrate with compatible KASK helmets featuring anti-fog and scratch-resistant coatings and a panoramic lens.

High-clarity polycarbonate face and eye shield designed to integrate with compatible KASK helmets featuring anti-fog and scratch-resistant coatings and a panoramic lens. The KASK V2 Plus Visor provides professional-grade eye and face protection for industrial and technical work environments. Recommended to wear safety glasses as well. Drip-proof upper edge and cut-proof edge for added comfort. Compatible with prescription glasses. Meets ANSI Z87.1, EN ISO 16321 and EN 14458 Standards. Screw-on mounting hardware included. Additional replacement adapters available SKU 35237, ASIN B017A7LPY0 suitable to attaching visors ear defenders to the helmet.

Exclusive Compatibility Compatible with MSA V-Gard Full Brim Hard Hats, our hard hat visor attaches securely to provide essential sun protection without obstructing your viewideal for welding, construction, or site management. Easy Installation This hard hat sunshade is quick to installattach the posts into the holes leaving one end free,flip your hard hat over, and securely clip the visor in placeIdeal for fast setup on any job site without slowing you down. Superior Sun Protection Blosail hard hat sun shade offers full coverage for face, ears, neck, and shoulders, protecting against UV rays and heat Ideal for construction and outdoor work, keeping you safer and more comfortable. Durable Cost-Effective Made from high-quality polyurethane with low-opacity black panels, this hard hat shade is flexible, tough, and not easy to break Simply wash with mild soap and water for reusean economical choice for job sites. Complete Package Includes 1 Hard Hat Sunshade 3 visor sections 3 clips Remove the protective films from both sides of each visor before use If you have any issues, please reach outwe will respond within 24 hours with a satisfactory solution.

AERO-CONTROL The Bambino Pro helmet has an incredibly top performing shell, designed with speed, safety, comfort, and advanced performance at the forefront. Any position the head assumes the outflow of air will be perfectly in line with the helmet. Ideal for track, TT racing, crono, and triathlons.. HIGH VENTILATION Ventilation is ensured by the presence of six micro air intakes on the front and four exhaust vents in the rear, connected via an internal air duct system.. MAGNETIC VISOR SYSTEM Innovative magnetic visor integrated into the helmet by use of 5 magnetic system which ensures optimal air flow and increased aerodynamics.. 3D DRY PADDING Tridimensional padding utilizes a multi-layer open cell construction process, this technology ensures high performance and comfort. Inner padding is removable and washable.. KASK Established in 2004 and based in Italy, Kask is widely distinguished for its achievements in producing the perfect balance between technological excellence, functionality, attractive design while maintaining a commitment to the highest standards in safety helmet production..

PLEASE NOTE The smoke tint on the visor is lighter than it appears in the image. Additional protection with non-cut and non-drip rubber edging. Recommended to wear safety glasses as well. 3.2 oz. Adapters included. Additional replacement adapters available SKU 35237, ASIN B017A7LPY0 suitable to attaching visors ear defenders to the helmet.

1.This is an auxiliary accessory for safety helmets. In order to prevent the sun shoot in the eyes during the working, we design a helmet cap according to actual needs.. 2.This climbing helmet sun hat is waterproof, lightweight, foldable, can be bent into various shapes, has good elasticity, and has a large telescopic range, which is convenient for storage, easy to carry, and does not increase the load.. 3.Both the front and back sides of the brim can be used. Which side to use according to the colour you like.. 4.The rescue helmet hat protects your eyes well when you are working at heights, or when rocks climbing, preventing the sun from shining directly into your eyes.. 5.The sun hat is very light and will not burden you. It can also be folded into various shapes at will, without hindering your work. If you are interested, please get one to try it out. If you are not satisfied, you can get a refund at any time..

Non-cut and non-drip rubber edging. Additional protection. Recommended to wear safety glasses as well. Anti-Fogging on the outside. Polycarbonate visor.

Safety-Grade Hard Hat Sun Shade Provide shade to reduce the damage of sun exposure and heat to your face, ears, neck, and shoulders which is safer and more comfortable great for men or women working in construction or working outside. Compatible with MSA Hard Hat Works great with MSA V-Gard full brim hard hat ONLY without affecting the structural integrity of the hard hat and without blocking your view Only 1 oz ultra-lightweight hard hat accessories with virtually no added weight. Easy to Install This hard hat visor installs in minutes with no tools required Stays securely in place once installed simply set it and forget it Please read the included instructions or watch our installation video before setup for best results. Premium Reusable Made of high-quality polyurethane and low-opacity black Lexan, this hard hat sun shade offers durable, long-lasting protection Simply wash with mild soap and water to reuse a cost-effective choice for the job site. Package Included1 Hard Hat Visor 3 sections of visor and 3 clips Please remove the protective films of the front and back of the three sections of visor before use.

WARNING - Plasma helmets meet ANSI Z89-1-2014 Type I top impact, Class C no electrical protection standards for industrial head protection. The high-density ABS plastic outer shell is designed to withstand significant impact from above or from the side, and meets CE EN 397 and CE EN 12492 standards. The rubberized wheel for headband size adjustment is easy to use even while wearing gloves. Every helmet contains ten aluminum-grilled air vents that provide efficient cooling and ventilation while blocking out debris. The chin strap is designed with four fasten points to reduce risk of helmet loss from impact breaking strength more than 50 decanewtons, or 112.4 pounds.

EXTERNAL SHELL ABS INTERNAL SHELL HD Polystyrene HEADBAND Soft PA Nylon. 2DRY A quick-drying technical fabric that accelerates the dispersion of sweat and moisture to the surface of the helmet padding for a drier, more comfortable wear.. UPDOWN 2.0 Integration of three components working together for a comfort fit that adapts and moves as the wearer moves.. STANDARD ANSI Z89.1 CSA Z94.1 EN 12492 Shock Absorbing Capacity clauses 4.2.1.2 4.2.1.3 4.2.1.4 Retention system strength clauses 4.2.3 Effectiveness of the retention system clauses 4.2.4 TYPE 1 CLASS C.

Size Description S 50-56 cm. M 52-58 cm. L 59-62 cm. CAIPI The off-roaders all-rounder . For those who crave adventure, Caipi is an explorers dream.. Designed to meet the needs of the rider that wants to take their cycling to the next level, free from the shackles of the road, Caipi provides light weight, great cooling and full protection for the demands of the trail..

Hardhats Caps. Manufacturer Kask America Inc. Made in United States. Item Package Weight 1.53 pounds.

Sun Protection Passed UPF 50 test and can over block 99.9 or more of sun UV rays. High-quality UV-resistant plastic panels that shield UV rays or other harmful rays in sunlight, and offer your skin considerate care. 360 Rotation Sun cap 360 rotation, flexibly adjust the angle of the sun cap. Sun Visor Hat is anti-ultraviolet, windproof, waterproof, high temperature, adjustable size, removable, easy to clean, high toughness, and easy to carry. Adjustable Strap With adjustable strap, to adjust to every head size. Even ladies with smaller heads will find they can adjust the strap to the perfect fit. This sun hat is fit for women, men, and youth. Breathable These sun hats have a versatile and breathable panel liner, that effectively helps stop sweat streaming down your face. It is very comfortable and firm when you wear it. Multi-Use The sport hat is great for camping, hiking, jogging, riding, golf, tennis, watching ball games, or simply walking outdoor activities, protecting your face and eyes from sun harmful UV rays..

Anti-UV This Visor features Anti-UV technology to prevent sunlight and annoying glare, increased match visibility and kicking accuracy. Easy installation With special clips that make it easy to remove and install the visor in seconds without any tools. Scratch resistant and durableOur Football Visor are made of stronger polycarbonate, which is more durable than regular visors and resists high-intensity scratches. Protects eyes from impact. Universal fit for most helmets This Football Visor fit youth and adult helmets not compatible with smaller children's helmets Clip system can be attached to almost any size helmet for easy installation. Show personalization There are more than 10 different styles to make your team more personal and fun. Meets Rules Clear football visors comply with NFHS regulations.

AERO-CONTROL The Elemento is a pure performance cycling helmet that delivers best in class aerodynamics, ventilation, and safety. For elite athletes competing in the worlds best road, cross country, cyclocross and gravel events, its design encompasses speed, safety, comfort, and advanced performance for those on a quest for ultimate performance.. ADVANCED SAFETY PROTECTION Redesigned internal frame and vertical stabilizer across the nape of the neck provide enhanced safety. Rotational Impact WG11 approved, the invisible layer of protection far exceeds international norms and surpasses the highest safety performance standards against rotational impacts. KASK-designed Multipod 3D-printed structure enables the helmet to better withstand linear and rotational impacts, increased aerodynamics, and enhanced ventilation.. MAX VENTILATION FEATURES The outflow of air via the helmets vents is perfectly in line with the helmet no matter the head position to ensure maximum ventilation. Fluid Carbon 12 composite techno polymer material increases the size of the internal channels to improve ventilation while simultaneously reducing the size of the vent holes to enhance aerodynamics. High visibility stickers for maximum safety in poor visibility and merino wool components for excellent thermoregulation property.. OCTO FIT RETENTION SYSTEM New over injected Octo rubberized micro dial adjuster ensures easy mid-ride micro adjustments with an improved finger grip. The vertical stabilizer has been redesigned to provide stability for a customized, secure fit for riders with longer hair. Ergonomic neck support for a fast and secure fit against the back of the head.. KASK Established in 2004 and based in Italy, Kask is widely distinguished for its achievements in producing the perfect balance between technological excellence, functionality, attractive design while maintaining a commitment to the highest standards in safety helmet production..

With an anti-fog and scratch resistant treatment. The panoramic lens is compatible for overlapping corrective glasses. Material Polycarbonate.

Durable Construction Crafted with High Density Polyethylene and Polycarbonate for long-lasting protection and impact resistance. Sun Heat Protection Reusable and replaceable visor shields your face from harmful UV rays and keeps you cool. Universal Fit Standard full brim hard hat attachment ensures a secure and comfortable fit for various head sizes. Easy Closure Snap closure type provides a quick and hassle-free way to secure the helmet. This Sun Shade Visor width 2-34 inches, boasts a thickness of 1.5mm, surpassing the market standard of 1mm. The extra width and thickness not only adds to its sun protection properties but also offers exceptional durability, ensuring long-term wear resistant performance.

Non-cut and non-drip rubber edging. Additional protection. Recommended to wear safety glasses as well. 3.2 oz. Top Kask Product.

HELMET VERSATILITY Thoughtfully designed to cater to many paths, the Sintesi helmet offers urban commuters, gravel adventurers and road speeders advanced safety protection and all-day comfort with a combined sophisticated sleek urban design.. ADVANCED SAFETY PROTECTION Rotational Impact WG11 approved, the Sintesis invisible layer of protection far exceeds international norms and surpasses the highest safety performance standards against rotational impacts. High visibility stickers ensure maximum safety in low light and poor visibility conditions.. VENTILATION 9 vent design on the front, crest, and back of the helmet capture airflow and actively pass it through the interior channels to ensure optimal ventilation.. COMFORT ERGO FIT Brand-new adjustment system engineered to improve fit and comfort, redesigned wheel offers premier grip for fine-tuned micro-adjustments, enhanced fit-system bolsters unparalleled all-day comfort, so you ride free from distractions.. KASK Established in 2004 and based in Italy, Kask is widely distinguished for its achievements in producing the perfect balance between technological excellence, functionality, attractive design while maintaining a commitment to the highest standards in safety helmet production..

Size 51-62cm 20-24.4. ANSI Z89.1-2009 Certified.

Hard Hat Sun Shade Compatible with all KLEIN TOOLS Full Brim Hard Hats ONLY Not for Other BrandsModels This visor snaps on securely without compromising your hard hats structural integrity or obstructing your line of sight. Sun Protection Reduce Glare With a generous 16-inch diameter, this hard hat sun shade effectively shield your face, ears, neck, and shoulders from harmful UV rays and intense heat Stay safer and cooler under the sun, whether you're on a construction site, landscaping, roofing, or doing any outdoor work. Lightweight Reusable Made from durable polyurethane and low-opacity black Lexan for extra sun protection Only 1oz design adds no noticeable weight to your helmet Easily washable with mild soap and water, making it an eco-friendly, cost-effective choice. Quick Easy Setup The hard hat visor mounts securely to your hard hat in about a minute Comes with a clear manual and video guide Once on, it locks in place with a rock-solid fit that wont slip or shake loose. Package Included 1 Hard Hat Visor 3 sections of visor and 3 clips Please remove the protective films of the front and back of the three sections of visor before use.

Package Includes this package entails 1 sun hard hat with dual solar fans and a neck gaiter in a high visibility reflective colorPlease note that, safety helmets are not included It offers a practical solution for those working in construction sites on hot days, thereby covering customer needs for protection against heat and bright sunlight. Ventilated yet Protective the full brim hard hat comes with a breathable mesh nape protector, providing not only shade but also ensuring air permeability Despite it's lightweight, it's reliable and durable, maintaining its quality without pilling, shrinking, or fading even after extended use, enabling you to use it for a considerable duration. Multipurpose Bandana our high visibility neck gaiter made from ice silk fabric offers UV-proof, dust-proof, and wind-proof properties, besides its quick-drying nature It stretches freely without any tension or deformation, offering coverage to your face, head, and neck As a multifunctional bandana, it ensures you remain cool and comfortable in various settings, whether worn as a balaclava, cap, neck gaiter, or face cover scarf. Dual Driver Fan the attached fans on the hard hat offer 2 driving modes One mode relies on solar power to blow air directly without storing it The other mode uses battery power, which can be charged via USB and lasts for 4 hours at high speed and 6 hours at low once fully charged When powered by solar power, the switch should be turned to the solar position the specific wind speed depends on the display strength, if powered by battery, the switch should be turned to the battery position. Practical and Versatile Utility this set of hard hat accessories provides comprehensive protection and cooling during summer Ideal for professions like construction, it is also ideal for gardening, hiking, cycling, and other outdoor activities It prevents your face and neck from direct sunlight and against harsh wind and dust.

Full Brim Sun Protection Engineered with an extended hard hat sun shade visor, this full-brim design delivers full-coverage shielding to protect your face, ears, neck, and shoulders from UV exposure and heat buildup. Specifically designed for construction crews and outdoor workers prioritizing safety-focused sun defense. Personalized Safety Gear Comes with two sets of A-Z crystal label stickers Collage your initials on your helmethat brim - say goodbye to lost gear and stand out on the job site.. Quick Installation Steps Step 1 Assemble 3 visor sections with clips leave one end free. Step 2 Clip the visor to the hard hat. Pro Tip Attach the SHORTEST panel to the FRONT for perfect alignment. Step 3 Snap all sections together done in 60 seconds You can adjust the buckle according to your hat brim sizeVideo guide in images. Adjustable Secure The visor is made of high-impact PVC and the buckle is adjustable at an angle.Clear, anti-glare visor design improves safety without obstructing your view. It fits most standard full-brimmed hard hats. Included in Your Kit 3x Brim Panel ShortLongLong 4x Heavy-Duty Clips One more than similar products on the market 2x A-Z Crystal Sticker Sheets 52 letters total Backed by a 1-Year Warranty we guarantee qualityIf you have any questions, please feel free to contact us..

Package IncludedOne hard hat visor sun shade consists of 3 visor sections and 3 clips Please remove the protective films of the front and back of the three sections of visor before use. Compatible with MSA Hard Hat Hardhat sun shade full brim works great with MSA V-Gard full brim hard hat ONLY without affecting the structural integrity of the hard hat and without blocking your view Fully reusable and replaceable. Hard Hat Sun Shade Extend the hard hat brim to provide shade to reduce the damage of sun exposure and heat to your face, eyes and ears which is safer and more comfortable.The hard hat visor is great for men or women working on construction site or working outside. Premium Reusable Made of high-quality polyurethane and low-opacity black Lexan, this hard hat sun shade offers durable, long-lasting protection Simply wash with mild soap and water to reuse. Installation Steps Simply assemble 3 sections of the visors with 3 clips but leave one free end, clip the visor to the hard hat and assemble the free ends.When installing, the buckle should face upward and the black part should be located on the front brim of the helmet. The hard hat sun shade full brim is finished.

The adaptor fits to all PlasmaSuper plasmaHP ear defenders. Easy installation. Material Plastic.

Hard Hat Sun Shade with Neck Shade Provides shade to reduce the damage of sun exposure and heat to your face, ears, neck, and shoulders, ensuring safety and comfort ideal for both men and women working in construction or outdoor environments. Full Brim Hard Hat Visor Compatible with V-Gard full brim hard hats ONLY, maintaining the structural integrity of the hard hat and not obstructing your view. Premium Reusable Made from high-quality, lightweight polyurethane and breathable mesh fabric with low-opacity black Lexan for additional protection. The back neck shade protects your neck and head without adding noticeable extra weight to your helmet it is reusable after washing with mild soap and water, making it economical. Please remove the protective film on the front and back of the three parts of the visor before use. Hard Hat Accessories Simply assemble three sections of the visor with three clips and snap posts into the holes but leave one free end Then turn the hard hat over, and clip the visor to the hard hat NOTE the SHORTEST section should be clipped to the FRONT of the hat if not will cause the visor doesnt work Finally, place the visor on the hard hat and clip the sections together, then assemble the neck shade. Package Included 1 Hard Hat Visor with Neck Shade comprising three sections of the visor, three clips, and one neck shade. Comes with a Ninety days guarantee.

Protone Icon updates its aesthetic for a modern look, the new model maintains the core features that have made it a true icon of the road. The Protone Icon utilizes seamless technology, joining the lower and upper parts of the shell to create a refined and super-elegant look. The new over-injected rubber dial provides improved finger grip. The vertical stabilizer has been redesigned for greater stability providing a customized fit for riders with long hair.

Replacement padding made of soft PA nylon for helmet interior. Compatible with KASK Superplasma Series helmets.

HELMETS ACCESSORIES - As illustrated Only For Full-Brim Hard Hats ,Easily assemble the three visor components using the three included clips, then secure the struts into the corresponding holes. Each visor can be quickly attached to helmets or hats via a simple clip mechanism, offering enhanced protection against light and sun once installed. Note Ensure the two A markings are aligned, and attach the shortest section to the front of the hat for proper function.. Multi-Purpose Design This versatile accessory set includes larger clips designed to accommodate bigger helmets or hats. If your hat is wider than the visor, simply flip the visor downward and adjust to the next size up. Once properly installed, it delivers reliable light and sun protection.. Sun Heat Protection Crafted from premium Polycarbonate material, this brim extender effectively blocks direct sunlight, reduces glare, and provides thermal insulation. It offers durable protection with impact resistance, enhancing comfort and safety without substantially increasing the weight of your hard hat.. Enhanced Safety Features This hard hat visor delivers comprehensive sun protection, minimizing UV exposure to the face, ears, neck, and shoulders. Suitable for both men and women working outdoors or on construction sites. The flexible Polycarbonate construction maintains the structural integrity of your hard hat while ensuring unobstructed vision and added safety.. Complete Package The set includes 1 hard hat visor comprising 3 Polycarbonate visors and 4 clips in various sizes. Please remember to remove the protective film from both sides of the dark visor section before use. Should you have any inquiries, our customer service team is ready to assist..

What you get this package comes with 1 piece of hard hat neck protection and 1 piece of neck gaiter in high visibility reflective color, a practical combination for people working in a construction site during the hot day. Breathable mesh sunshade the full brim hard hat neck protection comes with large shade diameter, attached with a breathable mesh nape protector, which is designed to block out harmful sun rays but ventilated to allow cool air in, lightweight and sturdy with good quality, no pilling, fading or shrinking even after a period time of usages, so you can hold it for quite a long time. Multi-functional bandana the high visibility neck gaiter is made of ice silk fabric, which is UV-proof, dust-proof, wind-proof and quick-drying, can be stretched freely without tension or deformation to keep your face, head and neck Wear the sun shade neck protection as balaclava, cap, headband, neck gaiter, face covering scarf, sweatband or other ways you like, keep cool and comfortable even in hot weather. Simple color both full brim and safety bandana are coming in simple color with reflective stripe design, which works well for adding additional visibility, making you stand out in busy environment. Wide applications this set of hard hat accessories are suitable for people who working for construction sites, they also can provide protection and cooling while gardening, hiking, cycling or other outdoor activities, protecting your face and neck from direct sunlight, and against the wind and dust.

Quality Materials Made from PC Material, this hard hat visor offers scratch-resistant and impact-resistant protection. These durable hard hat accessories maintain optical clarity while withstanding demanding work environments. Universal Size Designed to fit most standard hard hats, this protective visor provides complete facial coverage. The adjustable hard hat visor attachment ensures secure fitting similar to half hitch hard hat visor models for comfortable extended wear. Easy to Install This construction safety glasses easily install with a screwdriver. The industrial eye protector and face shield attachment maintains integrity for immediate installation as essential hard hat accessories. Wide Applications Fit for construction, manufacturing and industrial sites, this hard hat visor protects against dust, debris and impacts. These versatile hard hat accessories suit welding, grinding and woodworking tasks requiring certified eye protection. Fit Gifts This safety visor makes a meaningful gift for construction professionals. The practical hard hat visor serves as a caring present for colleagues or loved ones in hazardous occupations, demonstrating genuine concern for workplace safety with essential protective equipment.

LIGHTWEIGHT AND PACKABLE DESIGN The Sukeen Lightweight Sports Sun Visor is constructed using premium lightweight materials, featuring a high-density polyethylene HDPE brim for enhanced durability.. SUN PQUICK-DRYING AND SWEAT-WICKING This visor is engineered to facilitate rapid moisture evaporation during summer conditions. The integrated sweatband, crafted from high-performance quick-drying fabric, efficiently absorbs sweat and wicks moisture to the outer layer, ensuring you remain cool and dry even during strenuous physical activities or in high-temperature environments.. ROTECTION The Sukeen UPF50 Sports Sun Visor is equipped with a 1.97-inch 5 cm brim, offering effective shielding from harmful ultraviolet UV radiation. This ensures the safeguarding of both your face and eyes during outdoor activities, enabling you to fully enjoy outdoor environments without concern for potential sun-induced damage.. STRETCH FIT AND BREATHABLE DESIGN The Sukeen Sports Sun Visor is crafted with an elastic fabric band, ensuring a comfortable and secure fit for head circumferences ranging from 21.26 to 23.23 inches 54-59 cm.. APPROPRIATE OCCASIONS The sun visor hat is an excellent option for everyday use and a variety of outdoor activities, including running, gardening, walking, playing tennis, golfing, biking, playing beach volleyball, boating, traveling, and other similar pursuits..

POLYPROPYLENE HD EXTERNAL SHELL Lightweight external shell with exponential better performance. Excels in impact absorption, especially at lower temperatures -30C. Resists yellowing and degradation. ADAPTIVE FIT SYSTEM A size adjustment system which integrates three components for all-day comfort. A new, double diameter dial allows for easier size adjustments from 52-63cm. Ergonomic side wings ensure a fast and secure fit against the back of the head. The patented Self Adaptive Live Hinge is the latest, self-adjusting fit technology that moves as the wearer moves. ADVANCED CHINSTRAP Eco-leather chinstrap designed with new, rear adjustment points for a more personalized fit. Accommodates wider sizes and adapts to earmuff use. Color-coded fastener indicates meeting EN 12492 standard. EARMUFF ATTACHMENT SLOTS Helmet designed with standard 30mm EURO slots for attaching KASK earmuffs. Hi-Viz nameplate for easy identification on the back of the helmet. Easy Click Visor Adapters attaches visors or face shields to helmet. Lamp clip feature that holds corded earplugs. Meets ANSI Z89.1 Type I, Type II, Class E electrical protection standards proof tested at 20,000 volts. EN 12492 protection against side, front and rear impacts. Shock energy absorption capacity Clauses 4.2.1.2 - front, 4.2.1.3 - lateral, 4.2.1.4 - rear, Penetration clause 4.2.2, Retention system strength Clause 4.2.3 and Retention system effectiveness Clause 4.2.4.

POLYPROPYLENE HI VIZ HD EXTERNAL SHELL Lightweight external shell with exponential better performance. Excels in impact absorption, especially at lower temperatures -30C. Resists yellowing and degradation. High visibility reflective adhesives for added safety in low visibility conditions. ADAPTIVE FIT SYSTEM A size adjustment system which integrates three components for all-day comfort. A new, double diameter dial allows for easier size adjustments from 52-63cm. Ergonomic side wings ensure a fast and secure fit against the back of the head. The patented Self Adaptive Live Hinge is the latest, self-adjusting fit technology that moves as the wearer moves. ADVANCED CHINSTRAP Eco-leather chinstrap designed with new, rear adjustment points for a more personalized fit. Accommodates wider sizes and adapts to earmuff use. Color-coded fastener indicates meeting EN 12492 standard. EARMUFF ATTACHMENT SLOTS Helmet designed with standard 30mm EURO slots for attaching KASK earmuffs. Hi-Viz nameplate for easy identification on the back of the helmet. Easy Click Visor Adapters attaches visors or face shields to helmet. Lamp clip feature that holds corded earplugs. Meets ANSI Z89.1 Type I, Type II, Class E electrical protection standards proof tested at 20,000 volts. EN 12492 protection against side, front and rear impacts. Shock energy absorption capacity Clauses 4.2.1.2 - front, 4.2.1.3 - lateral, 4.2.1.4 - rear, Penetration clause 4.2.2, Retention system strength Clause 4.2.3 and Retention system effectiveness Clause 4.2.4.

Aero control- incredibly aerodynamic and top-performing shell, tested in the wind-tunnel and able to provide a really impressive cx rate. 3D Dry- the tridimensional 3D Dry padding utilizes a multi-layer open cell construction process for exceptional comfort. Coolmax interior- removable and washable inner padding in coolmax material. Mit technology- guarantees a higher safety and a complete protection thanks to the polycarbonate layer that covers the shell, base and back. Magnetic visor- the innovative magnetic visor is patented by Kask and integrated to the helmet thanks to a five magnets' system.

EASY-TO-USE Each sun shield easily attaches to helmets and caps with simple clip fasteners and are ready to provide additional coverageshade immediately after installation. MULTI-PURPOSE PROTECTION The high-quality polyurethane brim extender limits exposure to the sun, reduces glare, and protects against and heat, to add even more comfort and safety to existing hard hat type equipment. HIGH QUALITY DURABILITY In addition to the shade the shield casts, the hard hat accessories are made out of flexible polyurethane with a smoke-tinted Lexan front for extra protection. REUSEABLE COST EFFECTIVE The durable surface makes the unit easy to be cleaned and decontaminatedsanitized after each use and then put back into service. Keep costs down with this reusable equipment. THE SAFETY COMPANY In the spirit of the MSA mission, all components of the above-the-neckhard hat accessories product line harness precision engineering to craft the highest-quality safety products to enable work in the safest environments possible.

The protector provides security for all Zenith helmets. This Neck protection is characterized by its excellent material properties. Size universal.

Sun Heat Protection with a generous 16.5 inch diameter, this hard hat sun shade effectively shield your face, ears, neck, and shoulders from harmful UV rays and intense heat. And hard hat liner provides much needed shade for better on the job performance. It is an ideal construction accessories men. The hard hat visor compatible with AFP brand hard hats ONLY. Reusable Hard Hat Visor Sun Shade the hard hat shade constructed with plastic materials. Only 2.4oz design adds no noticeable weight to your helmet Easily store and portable, this hard hat shade visor ease by disassembling the three pieces. Stay safer and cooler under the sun, whether you're on a construction site, power, oil fields, docks, landscaping, or doing any outdoor work. Durable Hard Hat Accessories this hardhat sun shade made from polycarbonate and acry lonitrile compatible with AFP hard hat, this hard hat sun visor is thicker and more durable than others to withstand whole day harsh sun rays, this hard hat visor full brim won't fade from frequent exposure and is easy to clean and contaminate after each useEasily washable with mild soap and water. Easy Installation no tools required Simply assemble the 3 parts of the visor for hard hat with the 3 clips, then snap the struts into the holes, each visor can be easily attached to helmets and hats with a simple clip. These are the construction accessories you deserve. Package Included includes 1 hard hat visor 3 dark hard hat brims and 3 white clips, please tear off the protective film on both sides of the black part of the mask before use, if you have any questions, please feel free to contact us.

ULTIMATE INDUSTRIAL STRENGTH Protect your eyes from impact and debris. The H2 Visor exceeds the ANSI Z87 standard and is OSHA compliant. The brim design lens offers maximum protection and visibility and is ideal in construction sites, woodwork, shooting and any environment where the user is exposed to flying hazards.. EXTREMELY LIGHTWEIGHT- 20 lighter compared to other industry eyewear. You can wear the H2 Visor for an extended period without discomfort.. U6 RATING FOR EXCEPTIONAL UV RADIATION PROTECTION- The H2 Visor blocks over 99.9 of harmful UV rays.. ANTI-FOG FOR CLEAR VISION- The H2 Visor lens is offered with an Anti-fog coating that provides seamless transition from a warm to cold environment.. ANTI SCRATCH FOR IMPROVED DURABILITY- The lenses are treated with a hard coating which gives the H2 Visor the ability to withstand plenty of wear and tears, letting you stay focused on the job at hand..

1000LM With upgraded light source, the led headlamp is brighter than traditional headlamps. And its enough to deal the darkness in your life, providing optimal lighting for any situation, such as hiking, walking, mechanics,etc.. 230Wide Angle The adjustable headlight provides 230wide area illumination. The design is user-friendly, you neednt move headlight to illuminate the desired area, suitable for night running and cycling.. Rechargeable Battery Indicator With built-in rechargeable battery, no need to change dry batteries again, it is very economic and environment protection. The design of battery indicator remind you charging the lights in time.USB charging cable included. 3 Light Modes The headband light has white front headlights and red tail lights, with 3 light modeshighlowstrobe, and the front and tail lights will be turn on at the same time. The onoff button allows you to easily cycle through the 3 light modes.. Breathable Expandable Band With breathable and sweat absorbable elastic band, this headlamp is comfortable to wear. In the meanwhile, this headlamp comes together with 8 clips, which can be clipped on anywhere for your convenience..

HELMETS ACCESSORIES - As shown in the picture Simply assemble the 3 parts of the visor with the 3 clips, then snap the struts into the holes, Each visor can be easily attached to helmets and hats with a simple clip and provide additional lightsun protection once installed.Note The 2 A letters should be together, and the shortest part should be clipped to the front of the hat otherwise it will cause the visor to not work Finally, place the visor on the hard hat and clip the parts together. Multi-purpose protection Larger hat accessories We offer a set of larger clips for hats that fit larger helmets. Use the same method. If your hat is larger than the visor, flip the visor down and increase it by one size. Once installed, it provides additional lightsun protection. Sun and heat protection Made of high-quality Polycarbonate brim extender, it can reduce direct sunlight, reduce glare and act as a heat insulator, providing long-lasting protection and impact resistance, improving the comfort and safety of existing hard hats without significantly increasing the weight of the hard hat. Hard Hat Visor - Provides sun protection, reduces sun and heat damage to the face, ears, neck and shoulders, safer and more comfortable ideal for men and women working on construction sites or outdoors. In addition to the sun protection function of the mask itself, the hard hat accessories are made of flexible Polycarbonate, which provides additional protection without affecting the structural integrity of the hard hat or blocking your vision. Package Included - 1 Hard Hat Visor 3 Polycarbonate Visors 6 Large and Small Clips, please tear off the protective film on both sides of the black part of the mask before use, if you have any questions, please feel free to contact us.

Hard Hat Sun Shade Compatible with all Pyramex Full Brim Hard Hats ONLY Not for Other BrandsModels This visor snaps on securely without compromising your hard hats structural integrity or obstructing your line of sight. Sun Protection Reduce Glare With a generous 16-inch diameter, this hard hat sun shade effectively shield your face, ears, neck, and shoulders from harmful UV rays and intense heat Stay safer and cooler under the sun, whether you're on a construction site, landscaping, roofing, or doing any outdoor work. Lightweight Reusable Made from durable polyurethane and low-opacity black Lexan for extra sun protection Only 1oz design adds no noticeable weight to your helmet Easily washable with mild soap and water, making it an eco-friendly, cost-effective choice. Quick Easy Setup The hard hat visor mounts securely to your hard hat in about a minute Comes with a clear manual and video guide Once on, it locks in place with a rock-solid fit that wont slip or shake loose. Package Included 1 Hard Hat Visor 3 sections of visor and 3 clips Please remove the protective films of the front and back of the three sections of visor before use.

Crystal-Clear 180 View See your path without distortion. Our eco-friendly TPU brim blocks 99 of UVAUVB rays UPF 50, while its transparent design eliminates the blind spots of ordinary visorsperfect for tracking every shot on the course or every step on the trail.. Snug, Secure, No-Slip Fit Tired of Velcro that fails when you sweat Our precision drawcord lets you micro-adjust the fit in secondsfrom 21.2 to 23.6 inchesand it stays put, mile after mile. Just a simple pull, and you're locked in. No guesswork. Just comfort.. Cloud-Soft Comfort Band The inner lining is crafted from skin-friendly, quick-dry fabric that feels soft against your forehead. It prevents irritation and manages light moisture, keeping you fresh during morning walks, golf rounds, or gardening. Designed for all-day wear without the sweaty cap feeling.. Reflective Detail A reflective strip on the drawcord makes you visible to traffic, cyclists, and runners behind you. Whether you're logging miles at dawn or walking the dog at dusk, it's an extra layer of safety.. From Fairway to Main Street This isn't just a golf visor or running visorit's the sun visor hat that does it all. Wear it for weekend golf, weekday errands, coffee runs, or pickleball. With its sleek, low-profile look, it's the versatile visor you'll wear every day. REMOVE PROTECTIVE FILM BEFORE USE.

Crystal-Clear 180 View See your path without distortion. Our eco-friendly TPU brim blocks 99 of UVAUVB rays UPF 50, while its transparent design eliminates the blind spots of ordinary visorsperfect for tracking every shot on the course or every step on the trail.. Snug, Secure, No-Slip Fit Tired of Velcro that fails when you sweat Our precision drawcord lets you micro-adjust the fit in secondsfrom 21.2 to 23.6 inchesand it stays put, mile after mile. Just a simple pull, and you're locked in. No guesswork. Just comfort.. Cloud-Soft Comfort Band The inner lining is crafted from skin-friendly, quick-dry fabric that feels soft against your forehead. It prevents irritation and manages light moisture, keeping you fresh during morning walks, golf rounds, or gardening. Designed for all-day wear without the sweaty cap feeling.. Reflective Detail A reflective strip on the drawcord makes you visible to traffic, cyclists, and runners behind you. Whether you're logging miles at dawn or walking the dog at dusk, it's an extra layer of safety.. From Fairway to Main Street This isn't just a golf visor or running visorit's the sun visor hat that does it all. Wear it for weekend golf, weekday errands, coffee runs, or pickleball. With its sleek, low-profile look, it's the versatile visor you'll wear every day. REMOVE PROTECTIVE FILM BEFORE USE.

Size Description M 55-58 cm. L 59-62 cm.

This kit contains all the replacement parts required to fit the kask visor to the helmet. Replacement visor mounting attachment kit. It is only suitable for super plasma ply as.

ANSI Z89.1 Type I , Type II - Class E All around protection against impact and penetration including front, rear, and sides..

High Quality Made from premium UV resistant PC panels and a UV400 lens. Better transmittance offers greater clarity and definition for your vision. High temperature resistance and treated for greater durability and resistance against scratches. Offers privacy while shielding your face from sun rays.. UV Protection Rated at UPF 50, this visor blocks over 99.9 of the suns harmful ultraviolet rays. Fully cover your face to protect it from the elements while blocking harmful UV rays. Tinted lens allows you to see clearly without squinting in sunny weather.. Fully Adjustable Conveniently adjust the angle of the visor to your preference to block sunlight or expand your line of vision. The lens is also removable for easy cleaning. Avoid leaving your visor in extremely hot spaces for extended periods of time to extend the lifespan of your sun visor.. Comfortable Breathable Headband is made with a premium soft cotton fabric liner that wicks away moisture, keeping your head cool and comfortable at all times. Adjustable and flexible fastener at the back ensures everyone gets the perfect fit and keeps your hat in place. One size fits most. Great for camping, hiking, jogging, riding, golf, tennis, fishing or any outdoor activity.

With an anti-fog and scratch resistant treatment. The panoramic lens is compatible for overlapping corrective glasses. Material Polycarbonate.

With an anti-fog and scratch resistant treatment. The panoramic Lens compatible for overlapping corrective GLASSES. Material polycarbonate.

With an anti-fog and scratch resistant treatment. The panoramic Lens compatible for overlapping corrective GLASSES. Material polycarbonate.