Convert battery with JST to EC2 on ESC charger. Convert battery with EC2 to JST on ESC charger. Wire 20awg 4inch. Quantity 4pcs.

Convert battery with JST to XT60 on ESC charger. Convert battery with XT60 to JST on ESC charger. Quantity 4pcs.

Convert battery with JST to EC3 on ESC charger. Convert battery with EC3 to JST on ESC charger. Quantity 4pcs.

Convert battery with JST to EC2 on ESC charger. Convert battery with EC2 to JST on ESC charger. Quantity 4pcs.

Convert battery with JST to XT30 on ESC charger. Convert battery with XT30 to JST on ESC charger. Quantity 4pcs.

8 In 1 RC Charger Leads Reduce multiple charge leads, save money.. Input Connectors 4.0mm Banana Plugs.. Out Connectors TRX, Tamiya, Tamiya mini, EC3, JST, Futabafemale, XT60, T-Plug.. High Quality - connectors smooth flexible silicone wire.. What You can Get Thank you for choosing HTRC charger connector splitter, you will get a high quality connector splitter..

XT60 connector male connect to your battery. Compatible with DJI Phantom Quadcopter and other Aerial Multirotor helicopter aircraft . XT60 connector female connect to the quadcopter helicopter aircraft .. JST plug connect to the gimbal controller or other DIY equipment on your Quadcopter helicopter aircraft .. This adapter cable is use to supply power for the camera mount gimbal , that you do not need a extra battery for the gimbal any more..

Convert battery with T-Plug to JST on ESC charger. JST to Male T-Plug Wireless Connector Adapter. Quantity 3pcs.

Convert battery with XT30 to JST on ESC charger. JST to XT30 Male Female Connector Adapter Cable. Quantity 2 pairs 4pcs.

Convert battery compatible with Tamiya to JST on ESC charger. compatible with Tamiya to JST Male Female Connector Adapter Cable. Cable 20awg 10cm. Quantity 2 pairs 4pcs.

Convert battery with EC3 to JST on ESC charger. JST to EC3 Male Female Connector Adapter Cable. Cable 20awg 10cm. Cable 20awg 10cm.

Charge for 2s,3s,4s,5s,6s Lipo battery.Compatible with Mega Power 860 and 960 charger. JST-XH Connector is compatible with Tra-xxas, Ve-nom, Ra-cers Edge, Thunder Power,and many more batteries.. With this adapter, you get a One-size-fits-all module that will work with any battery from 2 cells up to 6 cells. Size60 x 25 x 15mm. Packgae include 2 Pieces balance boards.

Special compatible with car truck crawler and HS-P Redcat RC4WD Ta-mi-ya Axial SCX10 D90 HPI RC car,mini RC helicopter and indoor 3D plane, great for small Lipo and NiMH connection.. The Male to Female Y Harness can be used to power 2 cooling fans, Plug the JST male connector on your receiver, then you can connect the 2 cooling fans on the JST Female connector, also can run other parts which are in JST male plug, such as lights, winch.. The Female to Female Y Harness are used for TRX-4 ESC, it allows to be powered by TRX-4 ESC and run the lights, winch, cooling fan at the same time.. JST to JR Adapter cable can be use to power your device from a battery easily. If there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem..

Convert Battery with JR to JST on Electronic Speed Control Charger. Male JR to Female JST Connector Adapter. Cable 20awg Silicone Cable. Quantity 10pcs.

10 In 1 RC Multi-Charger Adapter Leads Suitable for all types of batteries, reduce multiple charge leads. Saving you time and money, simple and convenient. Battery Charger Balance Board Equipped with 1x Battery Charger Balance Board.Works with 2S - 6S batteries with a JST-XH Balance Plug.Apply to Most Lipo Battery Chargers. Output Connectors Suitable for TRX, Tamiya, EC3,EC5,XT30,XT90 JST, Futaba, XT60, T-Plug. High Quality Material This XT60 multiple adapter use high quality connector plugs and soft smooth silicone wire, which has excellent properties such as being able to endure high temperatures and flame retardant. Wide Application 10-in-1 XT60H multi-function balanced charging cable with balance board ideal for rc Lipo charging. Suitable for Dmars D300, RC aircraft, RC quadcopter and RC cartruck or RC boat, DX6, ISD battery charging. Package List 1 x 10 in 1 RC battery charge cable,1 x Battery Charger Balance Board. Note Red is positive and Black is negative,so please pay attention to correct use of this multi charger adapter.

Used for convert battery with male JST to XT30 on ESCPower Distribution board on DronesCharger. Female JST to Female XT-30 Adapter Wire. Wire Length 3.93 inch10cm. Wire Gauge 20awg. Quantity 3pcs.

Package includes 2Pairs JST to JR Male Female cables,Compatible with most mini RC helicopter and indoor 3D plane,also can be used to RC car truck for winch,lights,motor cooling heatsink fans which powered by receiver.. 2PCS Male JST to Feamle JR Cable and 2PCS Female JST to Male JR Cable.A great parts for DIY RC toys.. Material20AWG silicone wire. Great for small Lipo and NiMh connection.. Cable Length10CM3.93.

Package include 2x Male to JST Plugs Male, 2x Battery Straps. Compatible with DJI Phantom Quadcopter and other Aerial Multicopter helicopters aircrafts,rc cars.. How to use female plug used to connect the dual battery cable, Male plug used to connect the battery, JST connector used for supply power for led light, FPV Transmitter and gimbal,Aerial Camera RC Cars,etc.. Made from quality material. 22 Gauge Silicone wire.Good soldering quality. Ensure secure connection. Save time and effort to soldering wires by using these adapter.

Wire core 7 section 0.11 mm zinc copper, external diameter is 0.9 mm, tail zinc size is 2 mm, standard size, suitable for common uses. Micro connector dimension micro jst 1.25mm each cable wire length is approx. 8 cm 3.15 inchesMale Length Female Length 170MM, the cable wire diameter is 1.25 mm, micro size can fit your needs. Wire specification 157128. Match well with 26 AWG jst 1.25mm 2 pin micro male connector match well with female connector, easy to install and use. Common usage widely used in mini RC helicopterLED stripselectrical appliances, automobiles, robots, lighting, toys,batteries etc..

Convert battery with JST to T-Plug on ESC charger. JST to Female T-Plug Wireless Connector Adapter. Quantity 3pcs.

Convert battery with XT30 to JST on ESC charger. JST to Male XT30 Wireless Connector Adapter. Quantity 3pcs.

Convert the 120SR mQX JST pluged batteries into the smaller mCP-X plug. JST to PH 2P 22awg 5cm Soft Silicone Wire. Quantity 6pcs.

Convert the JST pluged batteries into the UMX plug. JST to PH 3P 22awg 5cm Soft Silicone Wire. Quantity 6pcs.

Convert Battery with JST to JR on Electronic Speed Control Charger. Male JST to Female JR Connector Adapter. Cable 20awg Silicone Cable. Quantity 10pcs.

Wide Compatibility Compatible with 2S to 6S Lipo batteries using JST-XH balance connectors. Ideal for RC cars, drones, airplanes, and boats.. Multi-Port Design Features separate ports for 2S, 3S, 4S, 5S, and 6S battery charging, making it easy to charge different batteries simultaneously.. Plug Play Simply connect to your X4 or similar chargers 6-cell balance port the board automatically adapts for each cell configuration.. Durable Build Quality High-quality PCB with stable connection points ensures reliable voltage balance and long service life.. Universal Application Compatible with Traxxas, Venom, Racers Edge, Thunder Power, and other major RC battery brands. A must-have charging accessory for RC enthusiasts..

Wire specification 157128. Micro connector dimension micro jst 1.25mm each cable wire length is approx. 8 cm 3.15 inchesMale Length Female Length 170MM, the cable wire diameter is 1.25 mm, micro size can fit your needs. Wire core 7 section 0.11 mm zinc copper, external diameter is 0.9 mm, tail zinc size is 2 mm, standard size, suitable for common uses. Match well with 26 AWG jst 1.25mm 2 pin micro male connector match well with female connector, easy to install and use. Common usage widely used in mini RC helicopterLED stripselectrical appliances, automobiles, robots, lighting, toys,batteries etc..

Used for convert battery with male JST to Deans on ESC Charger. Female Deans to Female JST Adapter Wire. Wire Length 3.93inch10cm. Wire Gauge 20awg. Quantity 3pcs.

Used for convert battery or charger cable with female XT60 to female JST on ESC Battery. Male XT60 to Male JST Adapter Wire. Wire Length 3.93 inch10cm. Wire Gauge 20awg. Quantity 3pcs.

Item XT60 male to female connector adapter with JST female plug wire. Connector 1 XT60 Male to Female Plug Connector 2 JST Female Plug. Wire Gauge 20AWG Wire Length 10cm 3.93inch. Package quantity 4pcs. Widely used for RC lithium battery charger, JST plug for FPV Transmitter and gimbal controller.

1. Packaging content 2 JST revolving XT30 male adapter plugs, 2 JST female to XT30 female adapter plugs. 2. Used to convert RC car truck FPV batteries and JST to XT30 on electronic speed controllers or chargers. 3. Strong and sturdy connection, lightweight, reduces the weight of RC toys. 4. Cable free design can save more space and is portable and easy to use.

Total 5Pcs.1PCS Male JR to Female JST Y Splitter,1PCS Male JST to Feamle JR Cable1PCS Female JST to Male JR Cable1PCS Male JST to Male JR Cable1PCS Feamle JST to Feamle JR Cable.. Designed for RC ESC,RC Motor Servo,Motor cooling fan,Light bar,headlight,RC winch connection etc...also,great for small Lipo and NiMH connection on mini RC helicopter and indoor 3D plane.. Made of 20AWG silicone material,durable to use.. Compatible with 110 Traxxas Slash TRX4 Axial SCX10 Redcat GEN7 HSP RC4WD Tamiya D90 HPI RC car, mini RC helicopter and indoor 3D plane.. High crrenttemperature silicon wireCable length 150mm5.9inch for Y splitter cable, 100mm3.9inch for JST to JR cable.Cable Length means the distance from pins to pins ,not contain the plugs housing.please allow 1-2cm measurements error..

Charge for 2s,3s,4s,5s,6s Lipo battery.Compatible with Mega Power 860 and 960 charger. The balance charger extension is compatible with Traxxas Venom Racers Edge Thunder Power and many more batteries.. With this adapter, you get a One-size-fits-all module that will work with any battery from 2 cells up to 6 cells. Size60 x 25 x 15mm. Packgae include 2 Pieces balance boards.

Total 3Pcs.These are 1 Male to 2 Female Y Harness Cable,1 Female to 2 Male Y Harness Cable,1 Female to 2 Female Y Harness Cable.. Compatible with Traxxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI 110 RC car,also can be used on most mini RC helicopter and indoor 3D plane for small Lipo and NiMh connection.. The 1 JST Male to 2 JST Female Y HarnessDual Fan Wiring Harnesscan allows use of 2 cooling fans,Plug the JST male connector on your receiver,then you can connect the 2 cooling fans on the JST Female connector,also can run the the other part which are in JST male plug,such as lights,winch The Female to Female Y Harness are used for TRX-4 ESC,it allows to be powered by TRX-4 ESC and run the the lights,winch, cooling fan at the same time.. Some led lights and winch has the female JST connector,so the 1 JST Female to 2 JST Male Y Harness may helps.. Cable length 15cm5.9inch for Y splitter cableCable Length means the distance from pins to pins ,not contain the plugs housing.please allow 1-2cm measurements error..

Product Name Dean T Female Plug Connector to JST Female Plug Connector Through a 10 cm 20AWG Silicone Cable Wire.. Wire Length About 3.93 inch 10cm. Wire Gauge 20AWG.. This is an Deans T plug to JST adapter cable. This cable has an Deans T style plug on one end and a JST plug on the other end.. Used for convert battery with male JST to Deans on ESC Charger.. Package Quantity 3pcs Dean T female plug connector to JST female plug connector with cable..

Complete Expansion Set This package includes five 1-to-2 parallel connection cables with jst connector design. The printer cable splitter set matches corresponding interface devices perfectly, meeting all your fan expansion needs for 3D printer setups.. Durable Construction Each fan splitter features PVC material with iron alloy construction, reinforced with plastic heads at both ends. This 2 pin jst connector design ensures long-term stable use and safe, reliable connections for your equipment.. Specialized 3D Printer Design This wire splitter is specifically engineered for 3D printer equipment. The jst connector 2 pin design directly connects two cooling fans to the motherboard fan interface, improving heat dissipation efficiency.. Simple Installation Process Featuring jst 2 pin connector with male and female plugs that match perfectly. The installation process requires no complicated operations, allowing beginners to easily complete fan parallel connections.. Current Safety Note The 2-pin connector general interface handles approximately 1A instantaneous current. Please verify your connected fan's current requirements and match reasonably with this jst connector to avoid overload and ensure stable operation..

XT60 Male to XT60 Female JST Female in-line power adapters.. 1 male XT60 to 1 female XT60 JST Female plug cable is connected in parallel.. XT60 female plug connects dual battery cable. XT60 male plug connects to your drone battery.. JST connector can provide power for LED light, FPV Transmitter and gimbal. Compatible with DJI Phantom Quadcopter and other Aerial Multicopter helicopter planes..

The JST Female to PH2.0 male adapter used to convert the 120SR mQX JST pluged batteries into the smaller mCP-X plug.. The jst to ph2.0 adapter compatible with Axial SCX24 124 RC rock crawler car,and for battery charging.. Cable Lengh80mm3.14 22AWG Soft silicone wire22AWG soft silicone wire can endure enough current. Connector Type JST-PH 2.0 male connector plug JST female connector plugCable Length means the distance from pins to pins ,not contain the plugs housing.please allow 1-2cm measurements error.. Package includes 12Pcs JST-PH 2.0 male to JST female Plug with 3.14 cable. Convenient to use.

Pack include2x Battery Charger Balance Board. Works With 2S - 6S Batteries With A JST-XH Balance Plug.. Apply to Most Lipo Battery Chargers. JST XH Board Balance Expansion Charger Adapter For RC 6S LiPos Battery Charging. TPFP Connector Is On Thunder Power And Flight Power Batteries.

Package includes 2Pairs JST to JR Male Female cables,suitable for most mini RC helicopter and indoor 3D plane,also can be used to RC car truck for winch,lights,motor cooling heatsink fans which powered by receiver.. 2PCS Male JST to Feamle JR Cable and 2PCS Female JST to Male JR Cable.A great parts for DIY RC toys.. Material20AWG silicone wire. Great for small Lipo and NiMh connection.. Cable Length10CM3.93.

Precise Specifications Contains 5 1-to-2 parallel connection cables, matching the corresponding interface devices to meet the fan expansion needs.. Reliable Material Fan splitter made of PVC material and iron alloy, with plastic heads at both ends to ensure long-term stable use and safe connection.. Adapter Equipment Wire splitter designed specifically for 3D printer equipment, it can directly connect two cooling fans and access the motherboard model fan interface, easily realize fan parallel connection and improve heat dissipation efficiency.. Convenient Connection Jst connector using JST 2-pin plug male and female connectors, the two match, the installation process is simple and fast, without Complicated Operations, and novices can easily get started.. Tips The 2 pin connector general interface instantaneous current is about 1A. Please confirm the current size of the connected fan when using it, and match it reasonably to avoid overload, so that the device can run more stably..

Package includes 5Pairs JST to JR Male Female cables.5PCS Male JST to Feamle JR Cable5PCS Female JST to Male JR Cable. Made of 20AWG silicone material,durable to use.Cable Length10CM3.93 A great parts for DIY RC toys.. Designed for RC ESC,RC Motor Servo,Motor cooling fan,Light bar,headlight,RC winch connection etc...also,great for small Lipo and NiMH connection on mini RC helicopter and indoor 3D plane.. Compatible with 110 Traxxas Slash TRX4 Axial SCX10 Redcat GEN7 HSP RC4WD Tamiya D90 HPI RC car, mini RC helicopter and indoor 3D plane.. An important part for DIY remote control toys. Very suitable for small Lipo and NiMh connection.

Package Contents 5Pairs JST to JR Male Female Cables. 5pcs Male JST to Female JR Cable5pcs Female JST to Male JR Cable. High QualityJST to JR Male Female Cable Made of 20AWG Silicone Material,Durable to Use.Cable Length10CM3.93. Easy to Install JST to JR Cable Featured with Female and Male Connector Which Can Be Connected to the Receiving Set and Steering Engine Easily. Application Designed for RC ESC, RC Motor Servo, Motor Cooling Fan, Light Bar, Headlight, RC Winch Connection etc. Great for Small Lipo and NiMH Connection On Mini RC Helicopter and Indoor 3D Plane.

Ideal RC Connector The JST female to JST female connector is specifically designed for RC motor ESC conversion, essential accessory for remote control enthusiasts.. Plastic Copper Materials Made from premium plastic and copper, the jst plug splitter adapter cable offers impressive durability and providing a dependable solution for prolonged use.. Safe Design The 22AWG connector jst plug splitter cables are crafted with meticulous attention to detail, provide dependable safety during use, ensuring secure connections.. Easy Connection With a length of about 5cm, this jst plug splitter cable extension facilitates seamless RC part connections without the need for additional soldering.. 5PCS Pack The set includes five JST female plug connector adapters, providing ample replacements for maintenance and ensuring your RC projects run smoothly..

24 AWG JST XH 2.54mm 23456789 pin micro male connector match well with female connector, easy to install and usem, meet your different installation needs.. Specification PITCH SIZE 2.54mm LENGTH OF WIRE 200mm CABLE TYPE 23456789 pin.. Material The wire contains different colors, which provides richer materials for daily design and DIY.. Widely used in mini RC helicopterLED stripselectrical appliances, automobiles, robots, lighting, toys,batteries etc.. Suit well for batteries balance charger plug, these micro Compatible with JST XH2.54 connectors are good partners for helicopter, quadcopter, air plane, boat and car controller..

Ideal RC Connector Solution --- The JST female to JST female connector is specifically designed for RC motor ESC conversion, essential accessory for remote control enthusiasts.. Plastic Copper Materials --- Made from premium plastic and copper, the adapter cable offers impressive durability and a long lifespan, resist damage, providing a dependable solution for prolonged use.. Precise and Safe Design --- The 22AWG connector cables are crafted with meticulous attention to detail, provide dependable safety during use, ensuring secure connections.. Convenient Length for Easy Connection --- With a length of about 5cm, this cable extension facilitates seamless RC part connections without the need for additional soldering.. 5PCS Pack --- The set includes five JST female plug connector adapters, providing ample replacements for maintenance and ensuring your RC projects run smoothly..

Package includes you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR Futaba cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness Abundant quantity and diverse styles that can meet your various needs. Appropriate sizes the servo extension cord measures approx. 15 cm 5.9 inches in length, universal size for your use, the color is white, black and red. Extensive usages these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more. Well made JST connector is made of quality PVC material, with good insulation and flame retardant The interior is made of tinned copper, which has a good transmission and low resistance. Useful function the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote, which is male to female.

This is the male and female connector cable,. Upgrade JST-PH 2.0 connector, the pins will not loose easily. Must have for HV batteries and high performance. 80mm lengthper unit. 22AWG soft silicone wire. Suitable for tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone.

Sold as a 2-pack set, these adapter cables allow you to connect 3-pin and 4-pin PC fans to mini 2-pin JST XH 2.52.54mm headers, suitable for use in power supplies, networking devices, and other electronics utilizing this connector.. Connector Specifications Features a 2-Pin Female Mini JST XH Connector 2.52.54mm pitch, with Pin 1 designated for Positive Voltage Red and Pin 2 for Ground Black, the most common wiring configuration.. Compatibility Check Required Given the lack of standardization for XH 2-pin fan connector wiring, some users may need to swap the pins on the mini connector for proper functionality.. Premium Construction RoHS compliant with all-black connectors and high-density PET sleeving, these cables offer durability and a clean look with reduced wire visibility.. Total cable length including connectors is 4.0 inches 10cm.

The JST Male to JST-XH 3S Male adapter used to the convert the 3s balancers pluged batteries into the JST plug.. Compatible with 110 112 RC rock crawler car,rc boat 3s Lipo battery.. Cable Lengh100mm3.93 20AWG Soft silicone wire. Connector Type JST-XH 3S Male connector plug JST Male connector plug. Package includes 5Pcs jst-xh 3s male to jst male Plug with 3.93 cable. Convenient to use and durable..

JST Connectors SH Series -- This product is a boxed JST SH1.0mm pitch connector.The SH series is a small connector series that is commonly used in areas such as electronic equipment and communication devices. The SH series is a mall connector series commonly used in electronic equipment and communication devices, etc. This series has a larger contact area to provide better electrical performance and higher durability.. Product Type -- 1mm JST-SH Connector Kits. With a pitch of 1 mm0.039 inches, the connection is tight and not easily loosened.. Premium Pre-Crimped Wire - Equipped with 28AWG wire with crimped female terminals on both ends, no need to use crimping tools, just insert the crimped cable into the male housing, saving time and convenient.. Can be Used as DIY Design -- This SH connector includes 34567891012 pin shell connector, 140 pcs in total, and also includes 150pcs pre-crimped cables and 20pcs heat shrink tubes, with rich models and sufficient quantities, which can satisfy different DIY needs.. Wide Application -- This JST SH 1.0mm connector kit is widely used for racing drones SPRacing F3, OMNIBUS F4 Pro F7 and flight controllers SparkFun Qwiic Adafuit STEMMA QT connection system. Also suitable for cameras, VTX, GPS, telemetry modules, Bluetooth modules, OSD or ultrasonic sensors..

Material 100 Silicone insulated. According to market investigation, many customers feedback that insulation which make from the PVC is easy to burn during using and even ruin the machine. SIMNAT Silicone Wire Connector for JST - Excellent Flexibility Good Conductors Tin plated copper, with good oxidative stability and weldability. Length of Cable 15cm 5.9 20 AWG. SIMNAT pigtail wire for JST is mainly used for mini RC helicopter, indoor 3D plane, Li-Po battery, Esc Bec Board and NiMh battery connection and etc.. Package Included 10 pairs 10pcs Female 10pcs Male Connector Charging Line for JST.

Mini jst connector 2pin jst ph - male connector and female connector cable,. PREMIUM MATERIAL - silicone material prosses high temperature resistance, bend easily and durability. LENGTH - 100mm lengthper unit, 20AWG soft silicone wire. WIDE APPLICATION - Suitable for tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, E010 E013, KingKong Tiny drone, Arduino mkr1010, MKR ZERO and MKR VIDOR 4000 lipo socket. PACKAGE INCLUDED - 5 Pairs Power whoop 2.0 Connector Cable 5pcs male cable 5pcs female cable.

Package includes 6PCS Cable. 1PCS Male JST to Female JR Futaba Cable, 1PCS Female JST to Male JR Cable,1 Male to 2 Female Y Harness, 1 Male to 3 Female Y Harness, 1 Female to 2 Female Y Harness, 1 Female to 3 Female Y Harness.. They are special for Traxxxas car truck crawler and HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC car, mini RC helicopter and indoor 3D plane, great for small Lipo and NiMH connection.. The Male to Female Y Harness can be used to power 2 cooling fans, Plug the JST male connector on your receiver, then you can connect the 2 cooling fans on the JST Female connector, also can run other parts which are in JST male plug, such as lights, winch.. The Female to Female Y Harness are used for TRX-4 ESC, it allows to be powered by TRX-4 ESC and run the lights, winch, cooling fan at the same time.. Cable length 15cm5.9inch for splitter cable, 10cm3.9inch for JST to JR cable.

Convert the 120SR mQX JST pluged batteries into the smaller mCP-X plug. JST to PH 2P 22awg 5cm Soft Silicone Wire. Quantity 6pcs.

INPUT CONNECTORS 14 AWG 4mm banana plugs. OUTPUT CONNECTORS compatible with TRXmale, Tamiyamale - Large, EC3male, JSTfemale, Futabafemale, XT60male, T-Deanmale, DIY Bare Wire. Had protective cover caps for open contacts of adapters not being used, no need worry about them touching and shorting out.. Octopus Charging Harness for TB6,TB6B,TB6AC Balance Charger Material silicone, High temperature resistant.. Saved you time and money when you are paying attention on what connectors you are getting for your batteries. Suitable for aircraft drone model RC cars trucks planes axis aerial device battery and airsoft.. 8-in-1 Banana Plug Squid Charger Multi-Adapter Leads has two DIY bare leads for further plug options.