Machined from solid aluminum and anodized for durability. Anchors in the top T-track on JessEm router table fences. Quickly moves into position and locks in place for a positive stop. Designed for use with either the JessEm Rout-R-Fence or Mast-R-Fence II. Not for use with the original JessEm Mast-R-Fence.

This top-tier router table incorporates a range of enhancements, ensuring precision, durability, and ease of use.. Specialized cam lock mechanism for secure and durable routing.. Underside of the table is pre-drilled to accommodate our TA Fence, Mast-R-Fence II, Mast-R-Fence III, Rout-R-Fence II, Heavy Duty Steel Stand, and ALTS Stand.. Table top dimensions 24 x 32, with a sturdy 34 thickness.. All machined components on the Mast-R-Lift Excel II, including the phenolic table top are meticulously crafted and CNC machined in Canada..

Unique router clamping system fits most fixed-base router motors.

Bundle Includes JessEm 02120 Mast-R-Lift II Router Lift with 9-14-inch by 11-34-inch Top Plate and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems. Built-In Locking Mechanism Mast-R-Lift II has a built-in locking mechanism from above the table. Using the same handle you raise and lower your router lift, a simple turn and you are ready for those heavy-duty, long term routing operations. Compatibility With a standard top plate, Mast-R-Lift II fits routers with 9-14-inch by 11-34-inch base using a unique adjustable clamping block system. Sturdy Construction Mast-R-Lift II top plate is hard anodized. Hard anodizing is an engineered surface treatment providing a thick abrasion resistant coating and not just a cosmetic treatment that will wear off. Lift Shafts The lift shafts are hydraulically pressed into a larger diameter mount. Attaching the shaft mount to the top plate spreads the lateral load, providing a very rigid and durable mount, standing up to the toughest of routing operations.

Unique 6063 extruded aluminum legs designed for a square cabinet to fit with no obstructions. All legs and braces are anodized for durability and all hardware is stainless steel. 26-14 width by 22-14 length footprint fits most standard 32 x 24 router table tops. Large, rugged 2-12-diameter leg levelers are adjustable from 36 to 38. Optional Mobile Access Kit for ALTS Stand adds mobility.

Micro-Adjuster fits both the Mast-R-Fence III and TA Fence. Machined out of 6061 aluminum and anodized for durability. Each full revolution is 164 or you can move your fence as accurately as 1512. Only one Micro-Adjuster is required per fence. Includes all mounting hardware and detailed instructions.

BUNDLE INCLUDES JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5 Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems. COMPATIBILITY This model is designed for use with Porter Cable 690890, DW 610616618, Bosch 16171618, or any other routers with 3.5 diameter motors. DOUBLE-SEALED BALL BEARING Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease. LIFT SHAFTS The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations. STURDY CONSTRUCTION All the machined components on the Rout-R-Lift II are CNC machined for durability.

EASY SET UP The guides lock into position along the track with a twist of the anodized aluminum clamping knobs. Grip force urethane rollers hold your stock securely in position. ANGLED ROLLERS The unique guide rollers mounted on a 5-degree angle effectively steering your stock towards your fence. This angle causes the roller to hold with more force if the wood tries to move against the direction of the feed. FOR 1316 THICK STOCKS The guides have 3-18 of total vertical travel and can accommodate a maximum stock thickness of 1316 above the mounting surface when mounted to the T-track. GUIDES CONSTRUCTION The guides are CNC-machined from 6000 series aluminum and anodized for appearance and durability. ROLLERS AND ROLLER AXELS The roller axels are machined from cold rolled steel and case hardened for durability, while rollers are designed from wear-resistant acetal resin.

COMPATIBILITY The Mite-R-Slide II will fit the JessEms Mast-R-Fence II Router Fence and TA Fence. HOW DOES IT WORK It slides onto the T-slot on the top of the fence which makes set up of the Mite-R-Slide II quick and easy. When you are done with your project, simply slide it off your fence and put it onto your shelf till next time. PRECISION MADE GUAGE The Mite-R-Slide II Gauge is rotatable 45 degrees to the left. Depending on your project, set the desired angle on the slider and lock the position in with a twist of our heavy-duty handle machined from solid aluminum and anodized with a beautiful champagne finish. FOUR ACETAL ROLLERS Four Acetal rollers, each with its own bearings, and each turning on a specially machined stainless steel roller pivot all fastened to a beautifully machined anodized aluminum mount. GUARD ASSEMBLY In addition, the Mite-R-Slide II has been equipped with a clear guard mounted to a swing assembly that enables the guard to move with the Mite-R-Slide II fence, as you push stock through the bit.

DESIGNED FOR ACCURATE CUTS Mite-R-Excel II Miter Gauge features nine miter detents and a spring-loaded indexing pin to ensure accurate cuts at the most common angles. ADJUSTABLE FLIP STOP Features adjustable flip stop accommodates up to 34-inch thick sacrificial fence. EXTENSION Fence extends from 20 to 36 inches to accommodate larger work-pieces when cutting. COMPATIBILITY Fits standard 34 x 38-inch miter slot and features laser-engraved angle measurements for accuracy. MATERIAL CNC-machined anodized aluminum components and Swiss-turned stainless steel parts. The guide bar made from Sheffield steel.

Red phenolic base creates a solid platform with a 100 flat surface. Machined 6061 aluminum extrusion components with black anodized finish. Fence face shimming bars fitted for an offset fence face marked as 132 and 116. Dust port fitting is designed to accept most shop vacuums hoses.

Exclusive Cam Locking System. Double sealed bearing construction. Bit Changes above the table for all routers. Machined from 38-Inch solid aluminum and Hard Anodized for durability. Fits most fixed base routers on the market today.

Mounted at an angle for effective stock steering towards the fence.. Prevent kickback by ensuring rollers spin in the direction of the feed.. Guides lock into position with a twist of the pivot knob, and height adjustment is controlled by a clamping knob.. CNC-machined from durable 6000 series aluminum, anodized for appearance and longevity.. INCLUDES 1x Infeed Roller, 1x Outfeed Roller, 1x Hex Key.

Includes 1 Stainless Steel 6 Precision Square with Patented Flex Grip. Features Flex Tabs which are used to grip to virtually any surface softer than the steel itself.. Scribing notches are spaced out every 116th, engraving is within 0.004 and we set every square to within 0.002 over the length of the blade.. Each square has a balancing tab which is easy to engage, locks into place and allows you to balance and scribe right across your work piece with ease..

34 thick phenolic material will not warp, sag, swell or corrode. 32 wide router table top is 24 front to back with a centered router opening. Rabbeted 9-14 x 11-34 opening supports most standard router plates and lifts. Extruded aluminum track with 14 T-slot and standard 34 miter slot. Underside pre-drilled for JessEm router table fences and steel router table stand.

Includes 1 32-Inch Router Table Fence System , 1Featherboard, 1 Adjustable Stop, 1 Bit Guard, 1Dust Port and 1 Measure Tape.. Our Router Table Fence System is easy to assemble and works with most models of router tables, or make your own router table.. Made from high-quality aluminum alloy, with good wear resistance and durability. T tracks on the front, excellent for a variety of woodworking accessories accepts 14 T bolts and hex bolts.. The melamine MDF fence faces could adjust using 4 rear threaded knobs that slide open and close the router bit mouth.. Bit guard protects fingers by shielding the cutter area. 2-12 inch OD and 2-14 inch ID Dust Collection port fits your wetdry vacuum and keeps the work area clean..

Material made of 316L Surgical Stainless Steel, hypo-allergenic,Epoxy Covers Rhinestone, Smooth Surface, Never Need Worry the Rhinestone Fall off.. Gauge 4g5mm, 2g6mm, 1g7mm, 0g8mm, 00g10mm, 1212mm, 91614mm, 5816mm, 111618mm, Please choose suitable size.. Beautiful Rhinestone Crystal tunnels plugs for ear lobe body piercing jewelry.. Package Included 1 pair ear plug same size. Please Look for the ZS Body Jewelry Store for Purchase.. Comfortable to wear, these are perfect for a wedding, special occasion, party or even work..