RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life. GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants. ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear. PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.

Drag Link Suspension Kit Replacement for Jeep 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Wrangler Pitman Arm to RH Steering Arm. Suspension Kit Includes 1x Front Drag Link 3x Front Tie Rods 2x Adjusting Sleeves 1x Front Track Bar. Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs. Undergo impact, wear, and fatigue testing to help ensure quality and durability. 10-Year Warranty.

Exactly Fits The steering kit perfectly fits for Jeep-2007-2017 Jeep Wrangler, 2018 Jeep Wrangler JK. Please refer to the Amazon Confirmed Fit and product description for details.. Pcs in Kit Rear Out Tie Rod End Link , Front Inner Tie Rod End Link to Pitman Arm, Front Outer Tie Rod Ends, Rear Sway Bar Links, Front Lower Ball Joints, Front Upper Ball Joints.. Greasing Zerk Applied grease fitting is self-lubricating with original lubricant, which can allow lubricant to flush and reduce tear and wear inside the ball joints to keep the maximum performance.. Enhanced Rod and Boot Optimized rods and coating for quiet operation and resistance to wear, salt, road grime and oils. Necessary hardware is included for easy and complete installation.. Reliable Warranty and Service 24-hours online customer service are always ready to help on any question about the product. 10 thousand miles or one year warranty is provided..

FitmentThe sway bar links are for 2007-2018 wrangler JK JKU.. FunctionAdjustable front sway bar quicker disconnect system allow 2.5 - 6 lifts,This system allows drivers to easily disconnect and reconnect the front swaybar, enhancing off-road capability and on-road comfort. Disconnecting the swaybar during off-road driving increases suspension articulation, allowing the wheels to better contact uneven surfaces and providing improved traction.. Enhanced Stability When driving on roads, reconnecting the front swaybar helps improve the vehicle's lateral stability, reducing body roll and enhancing driving safety.. Replace Part Replace fixed mounted version of 2030 and 2034 front sway bar disconnects.. Package Include 2 x front swaybar quicker disconnect, 1 x manual, all neccessary hardware accessories..

COMPATIBILITY - Compatible with Jeep Wrangler 2018-2025, Gladiator 2020-2025. REFERENCE PART NUMBER - JFBAJCWCA00147, MS25666, 68309364AB, 68309364AC, 68522995AA. NOTE - This part fits the model with Dana M210 Axle.. PRODUCT SPECIFICATIONS - Kit Parts Included 1x At Spindle Steering Drag Link Installation Position At Spindle Adjustable No Material Steel Ball Joint Included Yes Pre-Greased Yes Castle Nut Included Yes Dust Boot Included Yes. ABOUT JC WHITNEY - JC Whitney began in Chicago in 1915 on a simple belief that drivers should have access to reliable parts and the freedom to work on their own vehicles. Empowering millions of customers to maintain, restore, and upgrade their vehicles with confidencefrom garage divers to seasoned enthusiasts. We continues to deliver quality products and parts designed for precise fit and long-lasting reliability..

10pc Suspension kit- 1 Rear right upper outer drag link 3 front tie rods 4 front lower and upper ball joint 2 rear sway bar end link kits DS300005 ES3624 ES800593 ES800594 K3134 K3185 K6700. Check Compatibility Chart For Fitment.. 10pc Front Rear suspension kit fits for Jeep Wrangler 2007-2017, for Jeep Wrangler JK 2018.. Package includes 1x Rear Right Upper Outer Steering Drag Link - DS3000052, 1x Front Inner Tie Rod Pitman Arm 1st Design - ES3624,1x Front Left Outer Tie Rod End - ES800594, 1x Front Right Outer Tie Rod End - ES800593, 2x Front Upper Ball Joint - K3134, 2x Front Lower Ball Joint - K9185, 2x Rear Sway Stabilizer Bar Link - K6700.. Some of the parts have greasable fittings and other parts have sealed fittings. Easy to Install, precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the pack.. KDSA Brand provides quality assurance. If the parts don't perform to your satisfaction, please return it to us within 30 days with proof of purchase for a hassle-free refund, exchange, or replace. one year warranty..

COMPATIBILITY - Compatible with Jeep Wrangler 2007-2017, Wrangler JK 2018. REFERENCE PART NUMBER - JFBAJCWCA00156, DS300005, 541-040, 52060048AD. KIT PARTS INCLUDED - 1x Passenger At Steering Arm Steering Drag Link. PRODUCT SPECIFICATIONS - Ball Joint Included No. ABOUT JC WHITNEY - JC Whitney began in Chicago in 1915 on a simple belief that drivers should have access to reliable parts and the freedom to work on their own vehicles. Empowering millions of customers to maintain, restore, and upgrade their vehicles with confidencefrom garage divers to seasoned enthusiasts. We continues to deliver quality products and parts designed for precise fit and long-lasting reliability..

Fit for Jeep Wrangler 2007-2017, Fit for Jeep Wrangler JK 2018. Placement on Vehicle Front, Left, Lower, Rear, Right, Upper. Replace Part Number DS300005 ES3624 ES800593 ES800594 K3185 K3134 K6700. Please refer to the listing pictures for an accurate description of the parts included in the kit.. Easy Installation And Durable - Precision tolerances for easy installation. The kit is built with features to maximize absorption and durability for hard-working vehicles.. IMPORTANT NOTE - Please check the description or use the yearmakemodel drop down bar to confirm the compatibility before purchasing. If you don't make sure whether this item fit for your vehicles, please message us.

Tie Rod End Kit Includes 1x Upper Outer Steering Tie Rod End - DS300005.1x Front Inner Tie Rod - ES3624.1x Front Outer Tie Rod End Link Driver - ES800594.1x Front Outer Tie Rod End Link Passenger - ES800593.2x Rear Stabilizer Sway Bar End Links - K6700.2x Front Lower Ball Joints - K3185.2x Front Upper Ball Joints - K3134. Perfect Fitment Direct replacement for 2007-2017 Jeep Wrangler, 2018 Wrangler JK. Please check the Amazon Confirmed Fit and product description for accurate information.. Rugged Durability Front steering kit is easy to install like OEM alignment in steering parts. Heavy-design adjusting sleeve and drag link maximize absorption, tie rod end boot is self-locking and not easy cracked.. Easy Installation Wrench flats ensure easy installation and removal. Tie rod ends inner and outer set have precision tolerances for easy installation. Excellent material is used for automotive replacement tie rod ends kit that makes it more difficult to tear and damage.. Warranty and Support Limited warranty, outer tie rods mounting instruction and friendly customers service..

Vehicle Fitment Fits for Volvo 740 1985-1992, Volvo 745 1985, Volvo 760 1983-1990, Volvo 780 1987-1991, Volvo 940 1991-1995, Volvo 960 1992-1997. Reference Part Number DS300005, DS300043, ES3624, ES800594. Suspension Kit Buyer's Guide A Suspension Kit is basically a collection of parts that are used to restore, replace, or modify a vehicle's suspension system.this suspension auto parts directly replaces the original assembly on specific vehicle applications,easy installation and steering alignment.A complete suspension kit typically includes the following parts control arms, idler arm, pitman arm, tie rod ends,sway bar links, and ball joints.. About Warranty 1 Year 24 Months Unlimited-mileage Quality Guarantee. Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. Instruction is not included. Professional installation is recommended..

Premium Material front tie rod ball joint sway bar pitman arm Kit. With over 30 years of experience, built with high quality material, referring to international original factory standard and multiple tests, ensure quality and durability.. Compatibility Suspension Kit for Jeep Wrangler 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017, Wrangler JK 2018.. Easy to Install Rear sway bar upper lower ball joints outer tie rod ends drag link right at steering arm. Precision tolerances for easy installation and steering alignment giving you a perfect fit ready to use after opening the parcel.. Package Includes 1pc DS300005 steering drag link right at steering arm, 1pc ES3624 steering drag link at pitman arm, 1pc ES800593 front right outer tie rod, 1pc ES800594 tie rod end front left outer kit, 2pc K3134 front upper ball joints, 2pc K3185 front lower ball joint kit, 2pc K6700 rear sway bar link kit.. Brand kfvf Brand means the tracebility of quality. backed with a 12-month warrantyexperience exclusively for the US market. If any questions please feel free to contact us..

Vehicle Fitment Compatible with Jeep JK Series - Wrangler 2007-2017, Wrangler JK 2018. Installation Position Rear Right Passenger At Steering Arm. Specification Condition Brand New Material Steel Greased Fitting Included No Pre-Greased Yes Surface Finish Polished, Rust Protected. Reference Part Number DS300005, 541-040, 541040, 52060048AD. Buy with Confidence A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted steering drag link. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.

Reference Part NumberDS800982A, 52060048AD, 52060049AE, 52060052AG, 52060053AE, 52126122AC, 52060054AB, 68004085AA. Product CompatibilityCompatible with Jeep Wrangler 2007-2017, Jk 2018. Package Includes1- Drag Link at Pitman ES3624, 1- Right Upper Outer Tie Rod DS300005, 1- Right Lower Outer Tie Rod DS300043, 1- Left Outer Tie Rod ES800594, 1- Left Adjusting Sleeve pitman to connecting tie rod ES2012S, 1- Left Outer Adjusting Sleeve ES800983S. Order ReminderEnsure compatibility with your vehicle by reviewing the detailed product description before placing your order. Product GuaranteeWe stand behind our products with a 12-month guarantee.

Fits 2007-2017 Jeep Wrangler Rubicon, Fits 2007-2017 Jeep Wrangler Sahara, Fits 2007-2017 Jeep Wrangler Unlimited Rubicon, Fits 2007-2017 Jeep Wrangler Unlimited Sahara, Fits 2007-2017 Jeep Wrangler Unlimited X. Kit Includes 1- Drag Link at Pitman ES3624, 1- Right Upper Outer Tie Rod DS300005, 1- Right Lower Outer Tie Rod DS300043, 1- Left Outer Tie Rod ES800594, 1- Left Adjusting Sleeve pitman to connecting tie rod ES2012S, 1- Left Outer Adjusting Sleeve ES800983S. Part Number DS300005, DS300043, ES800594, K3185, K3134T, K621823, K641822, ES800983S, ES2012S, K750453, DS800982A, , ES3624. Items Included Adjusting Sleeves, Bolt, Boot, Center Stud, Clamp, Connector Fitting, Cotter Pin, Grease, Mounting Hardware, Nut, Sleeve. Features100 Accuracy of Fit, Adjustable, Easy to Replace, Greasable, No Drilling Required.

Fitmentfor 2007 2008 2009 2010 2011, 2012 2013 2014 2015 2016, 2017 2018 Jeep Wrangler JK. Superior quality, extra heavy-duty replacement for original fixed length panhard rod Variable length design properly aligns axle housing with chassis and prevents undue stress on related components. Extremely strong DOM tube construction utilizes OE bends for correct geometry and clearanceSpherical urethane bushing for unrestricted travel and high performance urethane for steering responsiveness. Package Included Adjustable Front Track Bar x1 Adjustable Rear Track Bar x1Hardware Kit x1. Placement on VehicleFront Rear, Left, RightFully adjustable on the vehicle.No removal required, no trial and error lining it up, and no more wasted time just to dial in your bar.

Part Name Steering Drag Link Kit. Part Number GY20491 GY20492 GX20052 GX20053 GX21994 GX20057 GX20052BLE. Applicable Models for Compatible with JD GY20491 GY20492 GX20052 GX20053 GX21994 GX20057 GX20052BLE. This Set Includes. 1x Right and 1x Left Drag Links. 1x Selective Sector Gear Plate. 1x Pinion Gear 2x Steering Shaft Bushings. Warranty 12 Months.

COMPATIBLE WITH 2007-2017 Jeep Wrangler, 2018 Jeep Wrangler JK. WHAT'S IN THE KIT 2x Front Brake Rotor 780518FZN, 2x Rear Brake Rotor 780519FZN, 1x Front Semi-Metallic Brake Pad Set D1273-D1327, 1x Rear Semi-Metallic Brake Pad Set D1274. COMPLETE BRAKE KIT FOR POWERFUL, RELIABLE STOPPING Metrix Premium Chassis Parts brake kits combine semi-metallic brake pads and precision-engineered rotors for superior heat dissipation, better bite, and consistent braking performance. Designed for OE-matched fit and durability, this kit ensures enhanced safety and long-lasting performance in all conditions.. HIGH-QUALITY ROTORS FOR PULSATION-FREE BRAKING Factory mill-balanced and ECE R 90 certified, our brake rotors meet or exceed OEM standards for smooth, vibration-free braking. Engineered for thermal stability, they resist warping and maintain consistent stopping power under all driving conditions.. TESTED BACKED BY A 3-YEAR 36,000-MILE WARRANTY Manufactured in Turkey under strict quality certifications IATF 16949, ISO 9001, ISO 14001, ISO 45001, ISO 5001, our semi-metallic brake pads undergo dynamometer, SAE J2522, J2521, Krauss, compressibility, and shear testing. For confident, dependable braking, choose Metrix Premium Chassis Parts..

Ensure a precise fit for your 2007-2017 Jeep Wrangler JK, including Rubicon, Sahara, and Unlimited models. This comprehensive kit directly replaces various OE Part Numbers like 5086143AB, 52037600, 52060054AB, DS300005, ES2012S, ES3624, K6665, and many more, guaranteeing compatibility.. This 6-piece front steering linkage assembly provides everything needed for a complete replacement. It includes 1 Front Lower Outer Drag Link, 1 Front Outer Tie Rod, 1 Front Inner Tie Rod, 2 Front Tie Rod Adjusting Sleeves, and 1 Front Upper Outer Drag Link for a full overhaul.. Engineered for enhanced steering precision and control, this suspension kit restores original vehicle handling. Each component is manufactured to strict specifications, offering a direct-fit replacement to eliminate common issues like loose steering, vibrations, and uneven tire wear for reliable performance.. Constructed from heavy-duty, robust materials, these components are built to withstand rigorous off-road conditions and daily driving. Featuring corrosion-resistant finishes, the kit ensures long-lasting durability and reliable performance even in harsh weather environments, providing sustained safety.. Designed for a straightforward, hassle-free installation, this direct-fit steering linkage assembly simplifies maintenance. Enjoy improved vehicle stability, responsive handling, and restored steering feel, enhancing overall driving comfort and safety for your Jeep Wrangler..

Replace Part Number DS300005 DS300043 ES3624 ES800594 Package Included 1x Front Inner Tie Rod 1x Front Lower Outer Drag Link 1x Front Outer Tie Rod 1x Front Upper Outer Drag Link. Fitment For Jeep Wrangler 2007-2017 Front Driver Passenger Side Inner Outer Steering Kit,For Jeep Wrangler JK 2018 Front Driver Passenger Side Inner Outer Steering Kit. High Quality Our products made with premium materials to ensure high quality and durability. The high-strength steel body makes it more stable during operation. All of our suspension parts have been pregreased before delivery, will require no more additional work. We provide suspension kits for most CARS,SUVS,TRUCKS,TRAILERS. - It's time to replace your suspension kit if you experience any of the following 1Steering noise sounds when turning. 2 Feeling every bump. 3 Difficulty when steering. Function A Suspension Kit is basically a collection of parts that are used to restore, replace, or modify a vehicle's suspension system. This suspension auto parts directly replaces the original assembly on specific vehicle applications, easy installation and steering alignment. A complete suspension kit typically includes the following parts upper lower control arms, idler arm, pitman arm, inner outer tie rod ends, front rear sway bar end links stabilizer bar link and left right ball joints.. Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. Instruction is not included. Professional installation is recommended. All our products are FIVE year FREE change..

Fits 2007 - 2017 for Jeep Wrangler Rubicon , Fits 2007 - 2017 for Jeep Wrangler Sahara , Fits 2007 - 2017 for Jeep Wrangler Unlimited Rubicon , Fits 2007 - 2017 for Jeep Wrangler Unlimited Sahara , Fits 2007 - 2017 for Jeep Wrangler Unlimited X. Part Number DS300005 DS300043 ES800594 K3185 K3134T,, K621823 K641822 ES800983S ES2012S K750453,, DS300005 DS300043 ES800594,, DS800982A, ES3624 DS800983S K621823 K641822. Package Includes 1- Drag Link at Pitman , 1- Right Upper Outer Tie Rod , 1- Right Lower Outer Tie Rod , 1- Left Outer Tie Rod , 1- Left Adjusting Sleeve pitman to connecting tie rod , 1- Left Outer Adjusting Sleeve. Warranty Each product has a 12-month warranty. We try to provide quality products and service to our customers.. Note Please carefully compare the pictures or OE numbers to match your original parts before purchasing the product. Please be sure to confirm the Year Make Model applicable information properly before ordering..

Compatible with for Jeep Wrangler 2007-2017, for Wrangler JK 2018. Kit Includes 1x Rear Passenger Side Upper Outer Steering Tie Rod End - DS300005, 1x Front Inner Tie Rod Pitman Arm 1st Design - ES3624, 1x Front Outer Tie Rod End Link Driver - ES800594, 1x Front Outer Tie Rod End Link Passenger - ES800593, 2x Rear Stabilizer Sway Bar End Link - K6700, 2x Front Lower Ball Joint - K3185, 2x Front Upper Ball Joint - K3134. Manufactured to Strict Standards The surface coating can improve the corrosion resistance, prolong the service life, and is Made of high strength materials for more stable use.. Improve Ride Confort Good quality reduces the road feedback brought by the vehicle during driving, allowing you to have a smooth and good driving experience. Quality Assurance 12-month warranty tested before shipping..

FitmentFit for Jeep Wrangler 2007-2017 Front Driver Passenger Side Inner Outer Steering Kit,for Jeep Wrangler JK 2018 Front Driver Passenger Side Inner Outer Steering Kit,Placement on Vehicle Front, Left, Right. Replaces number DS300005 DS300043 ES3624 ES800594. PremiumMade with premium materials to ensure high quality and durability.The high-strength steel body makes it more stable during operation.Fatigue Testing to Help Ensure Quality and Durability.OEM Design Eliminates rattling and clunking noises associated, Precision-made performance and additional strength.Components and hardware have been specially treated to increase strength resistance,precision-machined to stringent tolerances.Restores proper vehicle balance and Promotes longer shock life. Package1 Front Inner Tie Rod, 1 Front Lower Outer Drag Link,1 Front Outer Tie Rod,1 Front Upper Outer Drag Link. WarrantyOur Suspension Components are Ready to Meet the Rigorous Demands of Today's Foreign and Domestic Passenger Cars, Trucks and SUVs. Undergo Impact, Wear. Please check the description and compatibility chart before your purchasing. We provide FIVE YEAR WARRANTY for all our parts. We supply Suspension kit include ball joints, Stabilizer sway bars, tie rod ends, idler arm, pitman arm, track bar, drag link, control arm assembly for front rear lower upper left right driver passenger side..

Features outstanding durability and consistent performance designed to meet or exceed OE Specifications. Manufactured by ISO certified factories to meet requirements of fit, form and function. Thoroughly inspected for high quality parts and workmanship. Please see your year, make and model in the product details.

Vehicle SuitabilityCompatible with Jeep Wrangler 2007-2016. Replaces Part NumberDS800982A, 52060048AD, 52060049AE, 52060052AG, 52060053AE, 52126122AC, 52060054AB, 68004085AA. Package Includes1- Drag Link at Pitman ES3624, 1- Right Upper Outer Tie Rod DS300005, 1- Right Lower Outer Tie Rod DS300043, 1- Left Outer Tie Rod ES800594, 1- Left Adjusting Sleeve pitman to connecting tie rod ES2012S, 1- Left Outer Adjusting Sleeve ES800983S. Easy InstallationThe product is manufactured according to the original factory specifications, without the need to modify wiring or brackets. Support car owners or maintenance technicians to replace themselves, usually only requiring basic tools. Order ReminderEnsure compatibility with your vehicle by reviewing the detailed product description before placing your order.

Fits Jeep Wrangler - 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017.

Fits Wrangler - 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017.

7075 AIRCRAFT-GRADE ALUMINUM Massive 1.5 solid aluminum center section delivers high strength with reduced weight. 1 TON HEAVY-DUTY STEERING UPGRADE Built for aggressive off-road use, rock crawling, and overlanding. BLACK ANODIZED FINISH Corrosion-resistant coating with premium appearance and durability. BOLT-ON INSTALLATION Designed for direct installation with minimal modification required. INCLUDES EXTRA REPLACEMENT ENDS Comes with additional tie rod and drag link ends for long-term maintenance support.

Package Dimensions 8.5 L x 40.5 W x 8.5 H. Product Type Auto Part. Package Quantity 1. Country Of Origin United States.

over 200 stronger than factory tie rod. forged tie rod end housing designed specifically for JKs. HD 1.6 o.D. 4140 heat treated chromoly. tie rod end Joint incorporates same features found in TeraFlex ball joints, including 4140 chrome Moly ballstud and 1045 carbon Steel housing.

HD 1.6 O.D. 4140 heat treated chromyl. Over 200 stronger than factory tie rod. Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chromyl ballstud and 1045 carbon steel housing. Includes the clamp 1123160, or the TeraFlex Steering Stabilizer Relocation Kit.

1.25 O.D. fully forged drag link eliminates excess movement during hard steering maneuvers. Utilizes oversized DOM factory style adjusting collar and pinch clamp for simple adjustments. Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chrome moly ballstud and 1045 carbon steel housing. Fits OEM 17 wheel.

Fit type Vehicle Specific. Package Dimensions 111.8 H x 10.2 L x 15.2 W centimetres. Country of Origin China. Package Weight 9.979 kilograms.

Fits TeraFlex JK Tie Rod Draglinks Only. Will not fit OEM Tie Rod Draglink.

COMPATIBILITY Fits 2005-2010 Ford F-250 Super Duty 2005-2010 Ford F-350 Super Duty. Vehicle-Specific Steering Upgrade This MOOG FrontRear Suspension Stabilizer Bar Link is engineered for a precise fit and reliable performance on Ram 2500 and Ram 3500 trucks delivering restored stability. Heat Treated Ball Stud This easy-install steering link is engineered with a heat-treated ball stud design, providing improved strength and a tight bearing structure for connections. Impact Absorbing Link The durable steering connector features an impact-absorbing link and a pressed cover plate seal to keep out debris, extending the life of your suspension system. Pressed Cover Plate Seal This Stabilizer Bar Link stands out with its superior pressed cover plate seal and robust ball stud design that help minimize looseness and wear. About DRiV We are driven to deliver the automotive products and services our global customers want.

COMPATIBILITY Fits 1997-2006 Jeep Wrangler 1997-2006 Jeep TJ. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life. GREASEABLE SOCKET -- Inhibits rust and wear by allowing new lubricant to flush debris. ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear. PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates. RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.

FITMENT For 2007-2018 Jeep Wrangler JK JKU. OMIX 18050.11 Steering Drag Link Kit. WARRANTY Limited 5-Year Warranty. OMIX Proudly offering all the parts you need to keep your Jeep running like new with quality standards that always meet or exceed those of the factory part..

Heat treated chromyl. Forged tie rod end housing designed specifically for JKs. Adjustable preload tension to ensure proper long term durability.

Trustworthy replacement - this steering tie rod end assembly directly replaces the original equipment on specific vehicle applications. Durably designed - factory-sealed and precision-forged housing resists future corrosion. Reliably engineered - built to decrease wear rate and ensure overall strength. Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

Easy bolt-on installation. Made of forged solid steel for unsurpassed strength and durability. Massive 1.25in outside diameter. TECHNICAL NOTES Requires 2.5 - 6in suspension lift, Models with a drop pitman arm installed require a track bar drop bracket 1118. Available Below.. FITS 07-17 4WD Jeep JK WranglerJK Wrangler Unlimited 07-17 2WD Jeep JK Wrangler Unlimited. Installation Time 1-2 hours.

LHD Vehicles. Pitman Arm to Tie Rod. Requires Adjustment. Direct Replacement. Fit type Vehicle Specific.

If you are looking to beef up the drag link on your Jeep JK, this is the upgrade for you.. Put together in minutes and installed on your jeep with ease.. This kit is made to work with every year Jeep JK and JKU..

COMPATIBILITY Fits 2018-2018 Jeep Wrangler JK 2007-2017 Jeep Wrangler. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life. GREASEABLE SOCKET -- Inhibits rust and wear by allowing new lubricant to flush debris. ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear. PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life. STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength. EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates. RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on.

Improves steering geometry and handling.. Reduces bump steer.. Fully greaseable for a long lifespan.. High Steer Kit w Drag Link for Lifted Wranglers.. Backed by Rough Country's Limited Lifetime Replacement Warranty..

Drag Link fits all JK, including those with aftermarket JK axle housings.. Larger tubing size than previous design improves drag link strength and steering feel. Offers a more direct connection to the roadtrail compared to stock no more bent drag links and constantly having to re-center your steering wheel.. Synergy Heavy Duty Metal on Metal Tie Rod Ends are stronger and more durable than stock and include grease fittingsreplaceable dust boots for ease of maintenance.. Pitman arm side tie rod end is now a single plane design to eliminate unwanted drag link flop. You spoke and we listened. Drastically simplifies installation and only allows necessary degree of movement.. Drag Link Flip Adapter is NOW INCLUDED for those who will be converting to high steer. No longer need to purchase this part separately..

1.25 O.D. fully forged drag link eliminates excess movement during hard steering maneuvers. Utilizes oversized DOM factory style adjusting collar and pinch clamp for simple adjustments. Tie rod end joint incorporates same features found in TeraFlex ball joints, including 4140 chrome moly ballstud and 1045 carbon steel housing. Fits OEM 17 wheel.