Dual Leakproof DesignThis 4-way heater control valve is engineered for maximum leak prevention. The system combines a single, solid brass valve body eliminating internal leak points with heavy-duty, screw-tightened German clamps that enable precise, vibration-resistant sealing at every hose connection.. Clear Seasons MarkingKnow your mode at a glance. The knob features bold SUMMER and WINTER markings. Turn to Summer to boost AC cooling switch to Winter for maximum heater output. Ensures correct, worry-free switching every time.. Single-Knob Dual-ModeThe precision engineering of this bypass valve delivers optimal climate control with a single twist. Forged from military-grade brass, the valve diverts coolant in Summer mode to boost AC efficiency, and redirects flow in Winter mode for faster cabin heating.. Withstands Extreme Heat Pressure Engineered to perform in harsh engine bay conditions -20F to 305F, 232 PSI. This durability comes from its CNC-machined solid brass construction, which resists corrosion, deformation, and ensures long-term reliability.. Quick-Connect InstallationSimply insert the hose and tighten the clampalways ensure the cooling system is fully depressurized and cooled before installation. Secure connections with hose clamps to prevent leaks included clamps must be properly torqued.. Package Contents1 x 4-way heater core bypass valve, 4 x Heavy-duty German-style hose clamps for automotive high-pressure connections, 1 x Phillips screwdriver Note Universal clamps fit both 58 and 34 valves..

SizeBarb Size 58 16mm. Work Temperature - 20-150. Work Pressure 1.6Mpa.. MaterialsAll brass body brass ball core, brass stem. The electroplated handle is strong and durable. So high temperature resistance and no rust, suitable for high temperature coolant environment.. IntegratedNo screw fixation, integrated structure, no water channeling, good sealing. In some models, after a long time, the pipes are aging and the elasticity becomes poor. It is necessary to apply some high-temperature sealant or wrap some raw tape to improve the effect.. FunctionCold and warm air conditioning air is controlled by the duct control motor, is not felt when in cold weather. But when the weather is hot, because his warm air is not closed tightly, some warm air will go to the cold air, which will affect the cooling effect, and the fuel consumption will increase obviously. After installing the warm water valve, the warm water inside and outside will not circulate, and the temperature of the warm water tank in the cab will naturally drop.. ApplicationOne of the biggest uses of installing this valve is that the warm water from the control valve is sent to the warm water tank in the cab. With this warm water valve, the water from outside will rarely enters, and there is no need to worry about the dry phenomenon of the warm water tank. In case the heater water tank is broken or aged, the leakage will not cause the engine to pull, cause more damage..

4-way Automobile Heater Valve The heating water valve is specially designed for the automobile air conditioning system. It can improve the cooling effect and reduce fuel consumption in hot weather. The working temperature of this valve ranges from -14 to 176, and the working pressure is 1.6Mpa.. Winter Summer Manual Mode Cold and warm air conditioning air is controlled by the duct control motor, is not felt when in cold weather. But when the weather is hot, because his warm air is not closed tightly, some warm air will go to the cold air, which will affect the cooling effect, and the fuel consumption will increase obviously. After installing the warm water valve, the warm water inside and outside will not circulate, and the temperature of the warm water tank in the cab will naturally drop.. Application The bypass valve can control 4 channels respectively to form 2 different flow directions. Widely used in pneumatic system, such as propane gas air hose, fuel line. It can also be used in the reconstruction of automobile heating valve. The purpose of this valve is that the warm water from the control valve is sent to the warm water tank in the cab.. Solid Brass The valve is made of solid brass, which is strong and not easily corroded, suitable for long time use. Heavy duty brass valve and thickened wall, higher strength and very rugged.. Easy to Install No screws required, its simple to install the valve into the car of which the outer diameter of the water pipe is less than or equal to 0.9in. As an automobile modification accessory, its suitable for people with a certain kind of professional knowledge or auto repair shops..

Compatible With LS LT Swap Gen III, IV, V. Hose Ends 58 and 34. Heater Core Delete Water Pump Bypass Hose. Compatible With GM Pontiac LS LSX LS1 LS2 LS3 LS6 LS7 LT1 LT4. Easy to Clean Oil, Coolant and Fuel-Resistant Finish.

Replacement Number 626-001, 626001. Fitment Compatible with Most Common Heater Hoses, 2 interchangeable hose connectors are included, 58 and 34. Rugged Made of quality materials, this part has undergone try-on testing to ensure a quality fit and a long service life. Direct replacement This Engine Heater Core Bypass Kit fits and functions like original equipment for a smooth installation. Function This Engine Heater Core Bypass Kit provides a cost-effective solution when dealing with a faulty or leaking heater core. Instead of replacing the entire unit, our kit offers a quick and affordable fix that saves you both time and money.

Complete Heater Hose Connector Kit Includes 1 hose, 4 durable aluminum connectors, and 4 clamps. Everything you need for a heater core bypass or heater core flush installation in one package. Compatible with 58 and 34 hoses.. Sturdy Aluminum Construction Made from durable aluminum to replace weak factory plastic fittings. Designed to withstand high heat, pressure, and corrosion for a leak-free cooling system.. Stop Coolant Leaks Protect Your Engine Helps stop leaks before they cause overheating or engine damage. This heater core bypass kit ensures smooth coolant flow to maintain optimal engine temperature.. Direct Replacement for 626-001 Easy DIY Installation Engineered for a precise fit with no modifications required. Quick bolt-on installation saves time and mechanic fees ideal for DIY vehicle maintenance or as a heater core flush kit.. Long-Lasting Solution Designed for durability, reducing the need for repeat repairs and maintenance costs. A reliable choice for long-term cooling system performance..

Vehicle Fitment- Package include interchangeable 58 and 34 hose fittings to fit the most common heater hoses.. OE Substitute Application- Replaces Engine Heater Core Bypass Kit 626-001, Made to OE specifications, this superior product provides the same fit and operation as your original component.. Easy Installation Wide Compatibility- Designed with standardized specifications, as a direct OE Original Equipment replacement, this backing plate features precision-fit engineering and includes all necessary hardware.. Durable Construction Superior Quality- Crafted from premium materials and processed through rigorous manufacturing techniques, the backing plate offers excellent wear resistance and corrosion protection. It withstands long-term use and harsh environmental conditions, resisting deformation and aging to minimize replacement frequencysaving you maintenance costs in the long run.. Purchase Tips- Please carefully select your vehicle yearmakemodeltrim in the upper left corner of the page to confirm compatibility, or refer to the vehicle information in the description..

Ideal Replacement- As time goes by, your heater core will be damaged, rusted and lose its function due to long working hours. At this time, you need our heater core to replace it to restore its working performance and make it safer.. Applicable Models- Package include interchangeable 58 and 34 hose fittings to fit the most common heater hoses.. High Quality And Special- Our brackets are durable, meet OEM specifications, and offer an affordable replacement solution that saves you a lot of time and money . Easy Installation- Our engine heater core bypass kit are directly replaceable and easy to install. Watch the installation video on YouTube to better help you complete the installation. Quality assurance VODCACA is committed to producing high quality products and providing customers with a good shopping experience. Provide 2 years warranty, if you encounter any quality problems during use, please feel free to consult us via Amazon mail. We will reply within 24 hours and provide you with a satisfactory solution..

Upgraded Aluminum Alloy Our heater core bypass kit is made of high quality materials. The hose fittings have been upgraded to 6061 aluminum alloy for excellent thermal conductivity. At the same time, the surface was anodized to form a dense oxide film, which effectively isolated the external corrosive medium and extended the service life of the material.. High Quality Silicone Hose This U-shaped hose is made of high quality silicone hose. Compared with ordinary rubber hose, silicone hose has excellent high temperature resistance and good corrosion resistance. It is not easy to be damaged by sunlight, and is not prone to aging and cracking.. Fit for This heater core bypass kit fits for most common heater hoses.. Easy Installation This 58 34 hose heater core connectors repair kit is manufactured to meet specifications for fit, form and function. Replacing a damaged heater core is time consuming and expensive, this heater core bypass kit will bypass the faulty heater core and allow the car to run as normal, making it a cost effective and convenient solution.. Package Included 1 U-shaped Hose, 2 58 Hose Fittings, 2 34 Hose Fittings, 4 Hose Clamps..

Replace Part Number 551699. Hose Ends One end is 58 and the other end is 34. Compatible with LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77. Used to loop the heater hose outlets of LSLT engine water pump.. Package Includeds 1x Black Rubber Hose, 2x Clamps.

KDP heater core bypass kit is upgraded according to the products on the market, ensuring the premise of high quality and adapting to various unexpected scenarios to the greatest extent.We have our own moulds and tooling for this whole kit.. Universal fit and Cost-effective - this KDP heater core bypass kit offers an affordable alternative to replacing an entire failed heater core.. Complete solution- This heater core kit ontains components and hardware required to bypass a leaking or failed heater core.. DURABLE The KDP heater core bypass hose is made of high quality silicone instead of normal rubber,the heater hose connectors are all made of PA66-GF33, which is durable and high temperature resistant and it won't cut the pipe as rough aluminun fittings.. Easy install and AlL-in -kit. You just need to push the hose on and fasten it with our matched worm clamp with a common screwdriver every family has..

Durable Material This car heater control valve is made of solid brass, with high sturdiness, wear and corrosion resistance. It works well at -4 to 305, handles a pressure of 1.6Mpa, and won't deform easily, so it's built for long-term use. Safe and Reliable Our heater core bypass valve uses an integrated structure, with its interface designed with a hose barb anti-slip feature to ensure good sealing. When fully closed, it prevents water channeling, leakage and seepage. 2 Working Modes Winter mode adjusts the heater core valve to send water from the engine compartment to the cab's heater core via the heater to supply warm air. Summer mode halts water circulation, boosting cooling efficiency and cutting fuel use. Manual Control This 4-way automotive heating water manual control valve can control 4 channels separately, forming 2 different flow directions. It is specifically designed for automotive air conditioning systems, with flexibility to suit various setups. Package Contents The heater core bypass kit includes 1 piece of 58 inch outer diameter heater control valve and 4 clamps, fitting 16 mm inner diameter hoses. Note Ensure a smooth cut on the hose. Use the clamps and tighten them fully to prevent leakage.

Durable Material This car heater control valve is made of solid brass, with high sturdiness, wear and corrosion resistance. It works well at -4 to 305, handles a pressure of 1.6Mpa, and won't deform easily, so it's built for long-term use. Safe and Reliable Our heater core bypass valve uses an integrated structure, with its interface designed with a hose barb anti-slip feature to ensure good sealing. When fully closed, it prevents water channeling, leakage and seepage. 2 Working Modes Winter mode adjusts the heater core valve to send water from the engine compartment to the cab's heater core via the heater to supply warm air. Summer mode halts water circulation, boosting cooling efficiency and cutting fuel use. Manual Control This 4-way automotive heating water manual control valve can control 4 channels separately, forming 2 different flow directions. It is specifically designed for automotive air conditioning systems, with flexibility to suit various setups. Package Contents The heater core bypass kit includes 1 piece of 34 inch outer diameter heater control valve and 4 clamps, fitting 19 mm inner diameter hoses. Note Ensure a smooth cut on the hose. Use the clamps and tighten them fully to prevent leakage.

Perfect LSLT Engine Fit LS Heater Core Bypass Hose Coolant Crossover with Clamps Replacement for LS1 LS2 LS3 LS6 LS7 LH6 L92 L76 L92 L76 LY2 LZ1 L99 L96 L99 L96 LC8 L96 LC8 L77 LM7 LR4 LM4 L33 LQ4 LQ9 551699.Designed to seamlessly replace worn or damaged heater hoses, ensuring optimal coolant flow between 58 and 34 water pump outlets.. Wide Compatibility Direct replacement for 1998 and newer LSLT engines Gen 3, 4, and 5, including trucks, SUVs, and performance vehicles with 58 supply and 34 return ports.. Includes Heavy-Duty Clamps Comes with 2pcs rustproof stainless steel clamps and mounting screwdriver, solid and more convenient to install, leak-proof and anti-loosening, no need to buy extra accessories.. Premium Silicone Construction Made from high-quality, heat-resistant silicone rubber for superior durability, flexibility, and long-term performance under extreme engine temperatures.. Reliable Customer Support Backed by MRELCs 24-hour response for hassle-free assistance with orders, fitment, or product questions..

Replace Part Number 800-409, 800-409HP, 15032062, 15151875, 15151873, 15792820, 15792821, 15792822, 15834772, 15834773. Package Includes2 Heater Core Hose Connectors with Seal Ring 2 Disassembly Tools 58 inch and 34 inch 2 Stainless Steel Hose Clamps 1 Grease. Reliable SealingInternal to the coolant hose connector is a corrosion-resistant EPDM rubber seal ring, providing reliable sealing performance. Reliable lockingSpecially designed spring clip to securely lock the coolant connector to the heater core. In addition, 2 special dismantling tools are included for easy installation and removal of the connector. Corrosion Resistant MaterialOur coolant connectors are made of 304 stainless steel for superior corrosion resistance and durability to maintain performance in harsh environments with high temperatures and frequent vibrations. The smooth surface of the connector ensures a clean flow of coolant, and with a quality coolant connector you get a long-lasting, low-maintenance solution. Compatible with Heater Hose Connectors InletOutlet 34In Tube x 58In Hose fit for some models of Chevrolet, Ford, GMC, Cadillac, Lincoln, Pontiac, such as 1999-2014 Silverado, 2007-2013 Avalanche,2001-2014 Tahoe,2000-2004,2007-2014 Suburban,1999-2005,2008-2014 GMC Yukon,1999-2014 GMC Sierra 1500. NOTE Please check the size before purchasing 34in to heater tube, 58in to coolant hose.

Direct replacment for your old part .Replace part numbe is 626-001 .. The hose is made of high quality slicone,sturdy and durable.. Come with 58 and 34 aluminum hose fittings ,can work for most common heater hoses.. The kit also includes hose clamps and cable ties for installation and make you get a leak-free connection.. If you have any problem ,please contact us and we will respond you In 24 hours except weekends and holidays..

Replacement 626-001 ANP PUAUTO Engine Heater Core Bypass Kit provides a money-saving option for replacing a leaking heater core without having to replace the entire failed heater. Includes all the parts and hardware needed to bypass a failed heater core and stop coolant leaks, as well as interchangeable. GOOD QualityThe heating core is manufactured by an iso certified manufacturer that meets or exceeds OEM requirements,and has been tested on vehicles and materials.. Applicable ModelsPackage include interchangeable 58 and 34 hose fittings to fit the most common heater hoses.. Easy Installation Our engine heater core bypass kit are directly replaceable and easy to install. Watch the installation video on YouTube to better help you complete the installation. After-sales Service If you have any problems with Upgrade Aluminum Engine Heater Core Bypass you received, please contact us in time, we will solve the problem within 24 hours..

Application For GM Chevrolet Pontiac all LS or LT series Gen III IV V LS LS1 LS2 LS3 LS6 LS7 LSX LH6 LH8 LH9 LT1 LT4 LY2 LY5 LY6 LQ4 LQ9 LM4 LM7 LMG LC8 LC9 L20 L33 L59 L76 L77 L92 L94 L96 L98 L99 LZ1 LR4 LFA engines from 98 and Later, 98 - Up. Size HOSE ENDS-58 and 34. Function This LS Heater Core Bypass Delete Hose is designed to provide the high strength and resistance to loop the heater hose outlets of the LSLT engine water pump. Materials Made of synthetic EPDM rubber compounds that provide resistance to deterioration from coolants and variations of temperatures. Package 1 black rubber heater core bypass hose,2Clamp.

Applicable ModelInclude 2 pcs 58 and 2pcs 34 connectors can fit the most common heater hoses. Upgrade hose for Dorman 626-001, Compatible with GM Chevy Silverados Tahoes Yukons Honda Civic Ford Dodge Jeep Cherokee etc.. Quality Assurance Material upgrade, made of high quality 6061 billet aluminum, more durable and reliable.. Component 1 X Engine Heater Core Bypass Kit 1 X Heater Hose Connectors 34 x 34 1 X Heater Hose Connectors 58 x 58 1 X Seal tape 4pcs Caps. Easy Installation Direct remove the heater core hose, and easily install the bypass kit. Watch the installation video on YouTube for reference. Save Money If your heater core is failing or leaking, it is recommended that you replace it promptly. But you can also use this heater core bypass kit to direct replace, also save money. NOTE this is temporary repair solution.. Customer Service 1 year product quality warranty. Please get in touch with us at any time if the product has any quality issues, such as damage or vehicle fitment..

CompatibilityFit for Most Common Heater Hoses.. Part Number626-001. Please Recheck Your Vehicle Part Number and Compatibility in the Product Description Before Purchasing the Product.. Includes1 X Engine Heater Core Bypass Kit, 1 X Heater Hose Connectors 34 x 34, 1 X Heater Hose Connectors 58 x 58.. High QualityMade of High Quality Material, Durable, Stable Performance, Strong Reliability, Long Service Life.100 Tested Before Leaving the Factory.Tested Certified to Meet or Exceed OEM Quality Standards.. SupportWe Provide 12 Months of Product Service, Hassle-Free Return and Refund Policy. Please Buy it with Your Confidence..

Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job. Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects - you name it. Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently. Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire. Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out.

Replacement for 58 34 combination hose universal silicone. Includes interchangeable 58 and 34 hose fittings to fit the most common heater hoses. Material upgrade, made of good mass aluminum, more reliable. Our heater core can restore its working performance and make it safer. Installation instructions are not included, professional installation is always recommended.

This heater core hose is made of high quality silicone rubber,comes with 2pcs stainless steel clamps. The hose is used to adjust the heater hose outlets of your LSLT engine water pump,can be a direct replacement for your entire failed heater core. Hose Ends Size One end is 58 and the other is 34. Compatible with 98-up LS LT GEN 3 4 5 Engine with 58 and 34 heater supply and return ports.. PQY CUSTOMER SERVICEIf you have any problem ,please contact us and we will respond you in 24 hours except weekends and holidays..

58 End and 34 End Heater Core Bypass Hose Part Number 551699. 551699 Heater Core Bypass Hose Compatible with All LS or LT Series Gen III, IV, V Engines from 1998 and newer. Heater Core Hose Fit for LS1, LM7, LR4, LQ4, LS6, L59, LQ9, LM4, L33, LS2, LH6, L92, L76, LY2, LY5, LY6, LC9, LFA, LH8, LMG, LS3, L98, L9H, L20, L94, LZ1, L99, L96, LC8, L77, LT1, LT4, LS7, LSX, LH9. Precise Fitment 551699 LS Heater Core Bypass Hose with Clamps Features One End with a 58 Diameter and the Other End with a 34 Diameter, Designed to Connect Heater Core Ports with Different Sizes Securely. Includes Durable Clamps for Easy Installation and Leak-Free Sealing in Your Vehicles Cooling System.. It Is a Replacement Part, Not Original Part. But It Can Work Good For You..

Fits LS1 LS2 LS3 LS6 LQ4 LQ9 and other LS and LT series engines for heater bypass applications. Designed to replace heater core bypass hose part number 551699 in engine cooling systems. U shaped hose structure allows coolant to flow around the heater core. One end is 58 inch and the other is 34 inch for proper engine fitment. Comes with two metal clamps for secure hose installation.

Compatibility Information This heater core crossover coolant bypass hose is compatible with LS1, LSX, LS2, LS3, LQ4, and LQ9 engines. The OEM part number is 551699. Please consult your owner's manual to verify model specifications before purchasing to avoid incompatibility.. Flow Regulation This heater core bypass kit controls the path and flow of coolant between the heater core and the engine, enabling the engine to reach operating temperature faster or providing additional heat for cabin heating.. Secure Sealing This heater core bypass, when paired with clamps, securely fastens the hose and tightly connects to other components. It effectively prevents coolant leaks, avoiding engine overheating and other failures caused by coolant loss.. Smooth Flow This heater core hose resists clogging, preventing poor coolant flow or abnormal pressure. It avoids damage to the radiator or water pump, maintaining the engine at an optimal operating temperature.. Package You will get 1 x heater core crossover coolant bypass hose with two stainless steel clamps. Measuring 4.7 in length, it offers excellent temperature and pressure resistance. The hose allows flexible routing and features superior vibration resistance..

Compatibility Information Product is compatible with Chevrolet GM Pontiac LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4. Replacement OE 551699. Please confirm your model number before purchasing to ensure product compatibility.. Durable Material Made of sturdy rubber, this ls heater core bypass hose cooling crossover with clamps stays firm without breaking or deforming, offering long-lasting resilience and reliable heat resistance. It helps keep the cooling system flowing smoothly for a better driving experience.. Heat-resistant Performance The rubber build of this car heater core crossover cooling water bypass hose connector handles high temperatures well, maintaining flexibility and sealing strength under constant thermal changes. It supports stable cooling circulation to keep the system working properly.. Reliable Flexibility This u-shaped rubber heat-resistant and leak-proof hose with clamp is designed to withstand internal pressure and external bending, helping your system run safely and smoothly. It delivers dependable bypass flow with a compact U-shaped design. Keeps its shape while offering good bend recovery, ensuring consistent cooling direction in tight engine spaces. It supports a clean and simple crossover solution.. Steady Leak-proof Fit Built with firm rubber and matching clamps, this ls heater core bypass hose cooling crossover with clamps ensures a snug, leak-proof connection that helps protect the system during long-term use. It keeps cooling movement efficient and steady. Install by positioning the hose and fastening the clamps evenly.. Packaging Details You will receive 1 x U-shaped car heater core bypass hose, two clips. The inner diameter of one end of the product is 0.6, the outer diameter is 0.98, and the inner diameter of the other end is 0.75 and the outer diameter is 1.08..

Replace551699. Size One end is 58 and the other is 34. Compatible with For 98-up LS LT GEN 3 4 5 Engine with 58 and 34 heater supply and return portsCompatible with all LS or LT series engines from 1998 and newer. Package List 1 black rubber hose, 2 Clamp.

Direct ReplacementIf your heater core is failing or leaking, it is recommended that you replace it promptly, and our heater bypass kit offers an affordable alternative that will save you a lot of time and money.. Applicable ModelsIncludes interchangeable 58 and 34 hose fittings to fit the most common heater hoses.. High QualityMaterial upgrade, made of high quality aluminum, more durable and reliable, factory tested several times before leaving the factory, meet or exceed OEM standards.. Easy InstallationDirect replacement, easy installation. Watch the installation video on YouTube to better help you complete the installation. Perfect Service2 Year Warranty.Friendly return policy and customer service. If you have any questions, please contact us by email, we will reply you within 24 hours..

Engine Heater Core Bypass KitIf your floorboard full of radiator fluid, heater core leaking, the quickest solution is to bypass the heater core. The kit comes with everything you need to make a leak-free connection.. Replace Part NumberEngine Heater Core Bypass kit Replace OE Part Number 626-001. NOT OEM, BUT 100 tested before shipping. Please confim your part number before purchasing.. Easy Installation Aluminum Engine Heater Core Bypass Kit is installed in the engine compartment and bypasses the main heater core. Pressure clamp easy to open, push this in, and close it, and repeat on the other hose.. Heavy Duty DesignEngine Heater Core Bypass Kit is made of upgrade Alumium and premium rubber, durable to use. Interchangeable 58 and 34 hose fittings to fit the most common heater hoses, help fixed your overheating issue immediately.. Buy with ConfidencePackage Include 1pc 626-001 Engine Heater Core Bypass Kit, 1pc Heater Hose Connectors 58 x 34, 1pc Heater Hose Connectors 58 x 58. We provide friendly 247 customer service..

Integrated Structure for Reliably SealingIntegrated structure is adopted to ensure the good sealing ability. The valve is completely closed without water channeling or leakage. Another benefit is to prevent the warm water tank from drying, causing the engine to pull and get damaged. Easy to InstallNo screws required, it's simple to install the valve into the car of which the outer diameter of the water pipe is less than or equal to 0.9in. As an automobile modification accessory, it's suitable for people with a certain kind of professional knowledge or auto repair shops. Winter Summer Manual ModeIt offers you 2 modes for manual control. Close the valve in winter to allow the water cycle to proceed normally, that is, the water cycle can go from the engine compartment to the cab and pass through the heater. Open the valve in summer to stop the above-mentioned water cycle. Solid Brass Long LifespanMade of solid all-brass body and electroplated handle, the valve is sturdy, wear-resistant, and anti-aging, prolonging its service life. Besides, it's high-temperature resistant and not easy to deform, which is suitable for the high-temperature coolant environment. During transportation, collisions may cause minor paint chipping on the red handle, but it won't affect the product's normal use. 4-way Automobile Heater ValveThe heating water valve is specially designed for the automobile air conditioning system. It can improve the cooling effect and reduce fuel consumption in hot weather. The working temperature of this valve ranges from -20 to 150, and the working pressure is 1.6Mpa.

Cost-effective fix - this heater core bypass kit offers an affordable alternative to replacing an entire failed heater core. Complete solution - contains components and hardware required to bypass a leaking or failed heater core, including interchangeable 58 and 34 hose fittings to adapt to most common heater hoses. Durable materials - the components in this kit are manufactured from quality materials for reliable service. Trustworthy quality - vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience. Support available - every Dorman part is backed by Dorman's ASE Blue Seal Certified technical support team.

The equipped 58 inch and 34 inch hoses enable it to be compatible with most common heater hoses. This kit can preventing coolant from passing through faulty components and enabling the engine to operate normally, preventing more serious problems such as overheating or malfunction caused by heater core failure. Easy to install without any modification. Quick installation can be achieved with simple tools. This aluminum engine heater core kit can withstand the effects of engine vibration, temperature changes, and other factors, with a long service life. Please confirm its suitability for your car before placing an order.

Packaging includes 626-001 Engine Heater Core Bypass Kit Heater Hose Connectors 58 x 34Heater Hose Connectors 58 x 58.. MATERIAL The engine heater core bypass kit is made of high quality aluminum, very durable and can be used for a long time.. FUNCTION Over time, your heater core can become damaged, rusty and lose its functionality due to long hours of work. At this point, you need to replace our heater core to restore its working performance and make it safer.. Fit Includes interchangeable 58 and 34 hose fittings to fit the most common heater hoses.. INSTALLATION Simple and easy to install, can directly replace the old parts, can save your time..

Sturdy Construction Constructed with a solid brass body and plated handle, this heater valve ensures reliability and durability. It is resistant to high temperatures. Dual Manual Control This 4-way brass heater valve offers two manual control modes for enhanced versatility. Close the valve in winter to enable normal water circulation from the engine to the cab through the heater. Enhanced Driving Experience With its ability to adjust the water cycle based on seasonal needs, this heater valve enhances the overall driving experience by providing customizable control over the vehicle's heating system. Easy Installation Equipped with four clamps for secure installation, this 34 inch heater control valve offers easy setup and a reliable connection, ensuring effortless operation. Note Please check the details and product description before purchasing to make sure the part is what you need.

High-Grade Replacement for GM Part 551699 engineered for leak-free, high-temp durability.. Precision Dual-Sized Ends 58 on one side, 34 on the other perfect fit for LSLT water pump bypass ports.Precision Dual-Sized Ends 58 on one side, 34 on the other perfect fit for LSLT water pump bypass ports.. Fits 982024 Gen IIIIVV LS LT engines including LS1, LS2, LS3, LS6, LS7, LT1, LT4, LQ4, LQ9, LM7, LH6, LY6, L92, L76, and more.. Redirects coolant flow away from heater core essential for race builds, LS swaps, and cold-climate performance tuning.. Includes 2x ultra-flexible 4-ply black silicone hose 4stainless steel T-bolt clamps no extra parts needed..

Precision Fit Wide Compatibility Engineered to standards for a perfect, direct fit on popular LS engines like LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77 and many truck variants e.g., LM7, LQ4.Hose Ends One end is 58 and the other end is 34. Complete Kit with Clamps Comes as a ready-to-install set, including the necessary bypass hose and durable, high-quality clamps for a secure, leak-free connection right out of the box.Used to loop the heater hose outlets of your LSLT engine water pump. Enhanced Reliability Made from robust, heat and coolant-resistant materials to ensure long-term durability and reliable performance under your engine's hood.. Cost-Effective Solution Saves you significant time and money by bypassing a faulty heater core, eliminating the need for a costly and labor-intensive heater core replacement.. Optimizes Engine Temperature Helps the engine reach its optimal operating temperature faster, which is ideal for performance applications or simplifying the cooling system in race vehicles.. Package Includeds 1x Black Rubber Hose, 2x Clamps.

Applicable Includes 58 inch and 34 inch hose fittings to accommodate most common heater hoses. Material Made of iron material, long service life. Easy To Install Our engine heater core kits are drop-in replacements and easy to install. Replacement Part Number Replacement for 626-001. Package include 1 x engine heater core kit with 58 inch and 34 inch hose.

PREMIUM COOLANT BYPASS KIT Designed for heater core delete, coolant crossover and LS swap applications. Directly connects engine water pump heater ports to complete a clean, simplified cooling system loop.. WIDE TEMPERATURE RESISTANCE Constructed to withstand a working temperature range from -40F to 257F. Maintains flexibility and stability in extreme cold and high heat engine environments without hardening or failure.. CRACK-RESISTANT DURABLE STRUCTURE Made with reinforced rubber material engineered to resist cracking, splitting and aging under long-term use. Built to handle constant engine vibration and pressure for extended service life.. SECURE LEAK-PROOF SEAL DESIGN Engineered for tight, consistent sealing to prevent coolant leaks. The combination of precision molded ends and included stainless steel clamps ensures reliable, long-lasting sealing performance.. STANDARD FIT FOR LSLT ENGINES Features 58 and 34 port ends to match factory heater hose connections. Compatible with most LS and LT series engines, ideal for engine swaps and cooling system modifications..

Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models. Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking. Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer. Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies. Support available - every Dorman part is backed by Dorman's ASE Blue Seal Certified technical support team.

Solid ConnectionThe heater valve can be securely connected to a hose, suitable for hoses with an inside diameter of 58 inches 16 mm, preferably using a clamp and tightening the clamp as much as possible to prevent leakage. Operating temperature - 20-150. Working pressure 1.6Mpa.. All Solid BrassThe bypass valve is made of solid full brass body and plated handle, strong, wear-resistant, anti-aging, high temperature resistant, not easy to deform, higher strength, very sturdy and durable, suitable for high temperature coolant environment.. ApplicationThe 4-Way shaped hose barb ball valve is specially designed for automotive air conditioning systems to improve cooling efficiency and reduce fuel consumption in hot weather conditions, this flexibility allows it to be used in a variety of automotive air conditioning systems. The connecting hose size may be different for different models of automobiles, the use of reducer hose barb fittings can meet different needs. .. Multifunctional Manual ControlThe 4-way automobile heater valve provides 2 modes of manual control. In winter, close the valve to allow water to circulate normally from the engine compartment to the driver's compartment, ensuring a warm and cozy interior. In summer, open the valve to stop water circulation and prevent unnecessary heating.. Worry Free ServiceWhen you receive our heating water valve, if you have any dissatisfaction, please feel free to contact us. We will help you solve the problem within 24 hours until you are satisfied. Package Included 1 x heating water valve, 4 x clamps..

Direct ReplacementIf your heater core is failing or leaking, it is recommended that you replace it promptly, and our heater bypass kit offers an affordable alternative that will save you a lot of time and money.. Applicable ModelsIncludes interchangeable 58 and 34 hose fittings to fit the most common heater hoses.. High QualityMaterial upgrade, made of high quality aluminum, more durable and reliable, factory tested several times before leaving the factory, meet or exceed OEM standards.. FUNCTIONBy installing the Engine Heater Core Bypass Kit, the engine coolant is rewired from the heater core, so that the vehicle that cannot be operated can be driven again.. Easy InstallationDirect replacement, easy installation. Watch the installation video on YouTube to better help you complete the installation.

SzieThe water control manual valve has an overall length of 110mm4.33in, an overall width of 90mm3.54in, operating temperature range of -20-150C-4-302F and working pressure of 1.6Mpa232Psi, can fit 58 inch 16mm inner diameter soft water hose.. Winter Summer ModeThe 4-way solid brass core water valve offers two modes of manual control, a winter mode and a summer mode. In winter modewhen in use the valve is closed to allow the water circulation to proceed normally, i.e. the water circulation can go from the control valve to the heater tank, whereas in summer timewhen not in use the valve can be opened to stop the said water circulation.. Anti-LeakageThe heater valve is a unibody construction with no screw fixings throughout to ensure good sealing, a built-in brass ball valve and a fully closed valve with no water passage or leakage, also prevents the heater tank from drying out.. MaterialWater control manual valve body is made of thickened solid brass brass ball core, brass rod, featuring high temperature resistance, low temperature resistance, durable. The handle is made of zinc alloy with electroplated surface, which is not easily rusted easy to twist that is suitable for high temperature coolant environment.. Wide ApplicationThe heater valve feeds water into the tank and insulates it from outside water, temperature and wind. With this heater valve, very little outside water enters and you don't have to worry about the heater tank running dry, perfect for cars, air conditioners, water heaters and more..

Applicable ModelsIncludes interchangeable 58 and 34 hose fittings to fit the most common heater hoses.. High QualityMaterial upgrade, made of high quality aluminum, more durable and reliable, factory tested several times before leaving the factory, meet or exceed OEM standards.. Direct ReplacementAs time goes by, your heater core will be damaged, rusted and lose its function due to long working hours. At this time, you need our heater core to replace it to restore its working performance and make it safer.. Easy InstallationOur engine heater core bypass kit are directly replaceable and easy to install. Watch the installation video on YouTube to better help you complete the installation.

High-quality Material The hose is made of high-quality rubber material, which has good durability and heat resistance, can withstand high temperatures, ensures long-term reliable use, and provides good working condition.. U-shaped Design The hose adopts a U-shaped design, making it more flexible and convenient when connecting car heater cores and other components. The U-shaped design can also reduce backflow resistance and improve the fluidity of the contents, thereby enabling the heating system to work more efficiently.. Pressure Resistance and Bending Resistance The hose has high pressure resistance and bending resistance, and can withstand the pressure inside the system and the extrusion or bending of the external environment, ensuring the normal operation and safety of the system.. Product Specifications This car heater core bypass hose is 3 high, with an inner diameter of 0.610.73 on both sides of the pipe, an outer diameter of 11.1, and a pipe spacing of 1.2. Fastening clamps allow for size adjustment.. Packing Details You will receive a U-shaped car heater core bypass hose, two clamps. Product compatible with Chevrolet GM Pontiac LSX LS1 LS2 LS3 LS6 LS7 LQ4 LQ9 LT1 LT4. Please confirm your model before purchasing to ensure product compatibility..

Compact design for easy installation. Long-life alloys provide corrosion resistance. High-strength brazed joints ensure durability. GM-recommended replacement part for your GM vehicles original factory component. Offering the quality, reliability, and durability of GM OE.

Fits For Chevrolet for Pontiac Gen III, IV, V for LT1 for LT4 for LY2 for LY5 for LY6 for LQ4 for LQ9 for LS1 for LS2 for LS3 for LS6 for LS7 for LSX for LH6 for LH8 for LH9 for LM4 for LM7 for LMG for LC8 for LC9 for L20 for L33 for L59 for L76 for L77 for L92 for L94 for L96 for L98 for L99 for LZ1 for LR4 for LFA , engines from 98 and Later, 98 - Up.. Hose Ends 58 and 34 Used to loop the heater hose outlets of your for LT engine water pump.. Package List 1 black rubber hose, 2 Clamp. Ensure If there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem..

MaterialConstructed from high-quality aluminum and durable rubber, the connectors are lightweight, corrosion-resistant, and built to last, while the heater hose offers exceptional heat resistance and reliability. This material upgrade ensures long-term performance, meeting or exceeding OEM standards. Compatible ModelsThis heater core bypass kit model 626-001 is engineered for broad compatibility, fitting most common heater hoses with interchangeable 58 and 34 connectors. It is ideal for various vehicles, including sedans and SUVs, ensuring a seamless replacement without the hassle of model-specific selection. Key FeaturesThis bypass kit effectively bypasses a failing or leaking heater core to maintain system operation, restoring cooling efficiency and improving engine performance in low-temperature conditions. It provides an affordable alternative to costly repairs, enhancing driving safety and reducing downtime. Easy InstallationDesigned for straightforward setup, this bypass kit features a plug-and-play design that requires no vehicle modification. Simply cut off the coolant, remove the faulty heater core, and install the kit beside itwhether you're a DIY enthusiast or a professional mechanic, the process is quick and hassle-free. Package IncludesThe complete kit includes 1 heater hose 58 x 58 x 3.5 inches, 4 heater hose connectors 2 pieces of 58 and 2 pieces of 34, and necessary hose clamps, offering everything required for a full heater core bypass system maintenance.

FITS For?GM Chevrolet Pontiac all LS or LT series Gen III IV V LS LS1 LS2 LS3 LS6 LS7 LSX LH6 LH8 LH9 LT1 LT4 LY2 LY5 LY6 LQ4 LQ9 LM4 LM7 LMG LC8 LC9 L20 L33 L59 L76 L77 L92 L94 L96 L98 L99 LZ1 LR4 LFA engines from 98 and Later, 98 - Up.. REPLACES 551699.. HOSE ENDS One end is 58 and the other is 34.. Function Used to loop the heater hose outlets of your LSLT engine water pump. Heater core, delete water pump bypass hose. Easy to clean, oil, coolant and fuel-resistant finish.. ENSURE If there is any problem with the product, please do not hesitate to contact us, we will help you solve the problem..

Cost-effective Winter Maintenance Reduce the need for antifreeze with this rv water heater bypass kit, offering a money-saving solution for winter care.. Flexible Connection Options Includes 3 male 12 inch npt valves and double female connectors, providing versatility for different plumbing setups.. Complete Winter This kit guards your rv water system against freezing temperatures, including two tee valves, fittings, hose, and sealing tape for a comprehensive winter solution.. Easy The intuitive triangular markings on the handle simplify valve operation, ensuring a stable bypass process even in tight spaces, saving time and effort.. Brass Tee Valves Enjoy a longer service life with robust brass tee valves that resist heat, water erosion, and chemicals, outperforming plastic alternatives..

Compatible With Engine Heater Core Bypass Kit Includes interchangeable 58 and 34 hose Replacement for Most Common Heater Hoses. OE Number 626-001. Package List 1x Engine Heater Core Bypass Kit Includes 58 and 34 hose as pictures show. Easy Replacement This product is designed for perfect fit and easy installation, can be directly replaced with old models, installation process saves time, no complex tools and operation steps.. Warm Tips Please check the product information carefully before ordering to Confirm that this product is what you need..

Great Compatibility Specifically designed to separate quick connect fittings on 34 heater lines for GM Vehicles.. Superior Material Made of high quality aluminum alloy. Sturdy, high strength and anti-corrosion for reliable, long-lasting service.. Flexible Easy to Use This 39190 Heater Hose Disconnect allows you to connect and release tubing easily and quickly. Hinge design allows tool to slide over heater hose, even in tight spaces.. Quick Release Tool Place the Heater Hose Disconnect in the line, slide it over the fitting, and pull it out to release the fitting. This 39190 Heater Hose Disconnect streamlines the process and helps you get the job done efficiently.. 100 Satisfaction Guaranteed Buy with confidence, as LAIKOU strives to provide customers with excellent products and services. If you're not satisfied with our item, we'll provide a replacement or please return it for money-back in 30 days. Support 12 months Warranty..

Muzzys premium AC hack mod kit. Fits Ram 1981-2019, 2020, 2021, 2022, 2023, 2024, 2025, 1500, 2500, 3500, gas, and diesel trucks with weak and or warm AC from the factory. Fix the design defect they refuse to fix yourself. Gas trucks-See Photo 4Install the valve at the water pump on the front of the motor on the heater supply hose. Find the hose labeled Eng Out and remove it. Install this valve to the hose you removed and connect the supplied hose to the valve and the water pump. Install clamps as shown in the photos. Top off coolant, you will lose some when you initially removed the hose from the water pump.. Diesel trucks- See Photo 5 Install the valve on the heater supply line above the turbo. See Photo 5 to determine exact location to install the valve. Remove the heater supply line from the black tube coming from the motor. Install this valve to the hose you removed and connect the included hose to the valve and black tube and install the clamps as shown in the photos. Top off your coolant, you will lose a small amount when you remove the line.. There is a known defect in these new trucks. The blend door in the dash allows hot air via the heater core into the HVAC system when the AC is on. There is a service bulletin to address this and it requires them to rip your entire dash out to replace the HVAC system. I guarantee you will have damage and problems down the road if you allow them to do this plus there are many reports that it does not even fix the problem This is an easy fix that is guaranteed to make your AC blow 8-15 cooler. This kit installs in minutes without making any permanent mods to your truck. It is 100 safe for your truck and won't cause any damage or Engine Lights. This kit is comprised of premium components that will not fail..

Long-life alloys provide corrosion resistance. High-strength brazed joints ensure durability. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment OE. GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle. Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type. GM regularly updates production and service part designs to integrate new materials and technologies.

Engineered to meet or exceed manufacturer's specifications. Designed for exact fit in the vehicles original equipment heater casing. Drop in fit for easy installation. Fully brazed aluminum design. 100 per cent leak tested.

Tubes and fins are manufactured from high grade aluminum for improved longevity. Precision-cut and stamped aluminum plates reduce weight and increases lifespan of evaporator. OE-like design from single and double-tanks through single and double-channels. Limited lifetime warranty for evaporators.

One hose ,come with 2pcs stainless steel clamps. HOSE ENDS SIZE One end is 58 and the other is 34 . Used to loop the heater hose outlets of your LSLT engine water pump. Fits For Compatible with Chevrolet for Pontiac Gen III, IV, V for LT1 for LT4 for LY2 for LY5 for LY6 for LQ4 for LQ9 for LS1 for LS2 for LS3 for LS6 for LS7 for LSX for LH6 for LH8 for LH9 for LM4 for LM7 for LMG for LC8 for LC9 for L20 for L33 for L59 for L76 for L77 for L92 for L94 for L96 for L98 for L99 for LZ1 for LR4 for LFA , engines from 98 and Later, 98 - Up. DesignHeater Hose with Triple layers structure design, clamps with stainless steel design.

Product Type Heater Core. Brand Jetuplusllc. Warranty 1 Year.

Size 0.75D x 12.5W x 7.5H. Outlet and Inlet Size 38.. Mid-size and full-size cars, pick-ups Compatible with OEM cooler systems. GVWR up to 18,000 pounds, towing up to 3,500 pounds. 100 pressure testing to 150 PSI for quality assurance Ultrasonically soldered for durability. High efficiency turbulators.. Please check that this cooler fits your vehicle before purchasing. Please utilize the Compatibility Guide PDF towards the bottom of this page for fitment confirmation..

Genuine Motorcraft Heater Core. Part number NHC3. Fit type Vehicle Specific. Item Package Dimension 10.75L x 9.50W x 8.12H inches. Item Package Weight - 2.55 Pounds. Item Package Quantity - 1. Product Type - AUTO PART.

DURABLE DESIGN - Fully brazed aluminum design as specified by vehicle requirements, enhances efficiency and durability. QUALITY ASSURANCE - Every unit undergoes leak testing to ensure product integrity and performance. EASY INSTALLATION - Drop-in exact-fit design to make installation a breeze. DIRECT REPLACEMENT - Designed as a replacement part for OE numbers 1L7Z18476AA, F65Z18476AA and H2MZ18476C. ENSURE FITMENT - Ensure a perfect match with your vehicle by entering its details in the Amazon Confirmed Fit tool provided on this page.

This kit installs in minutes without making any permanent mods to your vehicle. NO HOSE CUTTING REQUIRED With this kit you can control flow to your heater core with a turn of the handle. Easy 5 Minute Install. Locate your heater core inlet hose. There will be two hoses coming from the firewall. One is the heater core in and the other is the out. This kit MUST be installed on the IN hose. Follow the hoses from the firewall and install this kit on the other end. Remove the vehicle heater hose from the port on the engine and install the supplied hose, valve, and clamps. This kit can be installed on either end of the heater IN hose. SEE PHOTOS TO THE LEFT.. This kit is 100 safe for your vehicle and won't cause any damage or Check Engine Lights. This kit is comprised of PREMIUM components that WILL NOT fail.. This PREMIUM kit is MADE IN THE USA and includes ONE Hi-TempHi-Pressure Shut off Valve, ONE 4 Hi-TempHi Pressure Heater Hose, THREE Stainless Steel Smooth Edge Band Clamps that WILL NOT cut into your hoses. This Kit includes a 4 section of high quality heater hose so you do not need to cut or modify your OEM heater hose to install this valve. Install the supplied valve at the END of your OEM hose and then attach the valve and supplied 4 hose to your engine outlet. On some vehicles it will not be easily accessible to install this kit on the engine side of the heater inlet hose. If this is your case you can also install the bypass kit on the fitting at the firewall where the inlet hose attaches..

4-way Automobile Heater ValveThe heating water valve is specially designed for the automobile air conditioning system. It can improve the cooling effect and reduce fuel consumption in hot weather. The working temperature of this valve ranges from -4 to 305, and the working pressure is 1.6Mpa.. Winter Summer Manual ModeIt offers you 2 modes for manual control. Close the valve in winter to allow the water cycle to proceed normally, that is, the water cycle can go from the engine compartment to the cab and pass through the heater. Open the valve in summer to stop the above-mentioned water cycle.. Solid Brass Long LifespanMade of solid all-brass body and electroplated handle, the valve is sturdy, wear-resistant, and anti-aging, prolonging its service life. Besides, its high-temperature resistant and not easy to deform, which is suitable for the high-temperature coolant environment.. Integrated Structure for Reliably SealingIntegrated structure is adopted to ensure the good sealing ability. The valve is completely closed without water channeling or leakage. Another benefit is to prevent the warm water tank from drying, causing the engine to pull and get damaged.. Easy to InstallNo screws required, its simple to install the valve into the car of which the outer diameter of the water pipe is less than or equal to 0.9in. As an automobile modification accessory, its suitable for people with a certain kind of professional knowledge or auto repair shops..

4-way Automobile Heater ValveThe heating water valve is specially designed for the automobile air conditioning system. It can improve the cooling effect and reduce fuel consumption in hot weather. The working temperature of this valve ranges from -4 to 305, and the working pressure is 1.6Mpa.. Winter Summer Manual ModeIt offers you 2 modes for manual control. Close the valve in winter to allow the water cycle to proceed normally, that is, the water cycle can go from the engine compartment to the cab and pass through the heater. Open the valve in summer to stop the above-mentioned water cycle.. Solid Brass Long LifespanMade of solid all-brass body and electroplated handle, the valve is sturdy, wear-resistant, and anti-aging, prolonging its service life. Besides, its high-temperature resistant and not easy to deform, which is suitable for the high-temperature coolant environment.. Integrated Structure for Reliably SealingIntegrated structure is adopted to ensure the good sealing ability. The valve is completely closed without water channeling or leakage. Another benefit is to prevent the warm water tank from drying, causing the engine to pull and get damaged.. Easy to InstallNo screws required, its simple to install the valve into the car of which the outer diameter of the water pipe is less than or equal to 0.9in. As an automobile modification accessory, its suitable for people with a certain kind of professional knowledge or auto repair shops..

Feel Better in SummerCold and warm air conditioning air is controlled by the duct control motor, is not felt when in cold weather. But when the weather is hot, because his warm air is not closed tightly, some warm air will go to the cold air, which will affect the cooling effect, and the fuel consumption will increase obviously. After installing the warm water valve, the warm water inside and outside will not circulate, and the temperature of the warm water tank in the cab will naturally drop.. ApplicationThe bypass valve can control 4 channels respectively to form 2 different flow directions. Widely used in pneumatic system, such as propane gas air hose, fuel line. It can also be used in the reconstruction of automobile heating valve. The purpose of this valve is that the warm water from the control valve is sent to the warm water tank in the cab.. Solid ConnectionThe 4-Way shaped hose barb ball valve can be solid connected to the hose Fit hose which ID of 16mm. Keep the hose incision flat. It is better to use with clamps. Tighten clamps as tightly as possible to prevent leakage.. Solid BrassThe valve is made of solid brass, which is strong and not easily corroded, suitable for long time use. Heavy duty brass valve and thickened wall, higher strength and very rugged.. Package Include1PCS 58OD Barb Heater Control Valve..

Vehicle Suitability Compatible with Most Common Heater Hoses 58 X 58, 58 X 34, 34 X 34, 16mm x 16mm, 16mm x 19mm, 19mm x 19mm. Reference Number 626-001. Package Contents 1 Heater Hose 2 Hose Clamps 2 Heater Hose Connectors 58 in x 34 in 2 Heater Hose Connectors 58 in x 58 in. Important Reminder Review product description for detailed fitment info before ordering to confirm this product's compatibility with your vehicle. Purchase with Confidence Enjoy 1 Year guarantee on each product for your peace of mind.

restore cooling system function and performance. some gm genuine parts may have formerly appeared as acdelco gm original equipment oe. gm engineers design and validate oe parts specifically for your chevrolet, buick, gmc, or cadillac vehicle. original equipment parts are designed to work with your gm vehicle safety systems - aftermarket replacement parts may not meet the same oe safety regulations, depending on the part type. gm regularly updates production and service part designs to integrate new materials and technologies. Fit type Vehicle Specific.

58 End and 34 End. Compatible with Most Common Heater Hoses. Made of high-quality rubber and aluminum alloy. Aluminum fittings replace plastic fittings for durability. Feel free to contact us if you have any questions.

Part NumberPart Number15032062 15151873 15151875 1579282015792821 15792822 15834772 15834773 800409 800-409. Please use the parts search tool in the upper left corner check yearbrandmodel to make sure our part are same as your old one.. Package Including2 Heater Core Coolant Hose Connector.. This is Non-OEM product, accessory only.. Please contact us if you have any question regarding our this product.

Allow Coolant to Bypass heater core to reduce heat inside the vehicle.

Package Dimensions 8.382 L x 2.032 H x 3.302 W centimeters. Package Weight 0.5 pounds. Automotive Cooling Parts. Country of Origin China.

LS LT Swap Gen III, IV, V. 58 and 34 Hose Ends. 2 Clamps included. Silicone Hose. Better pressure resistance and overall performance.

FITS 2013-2019 Ranger XP 900 XP 900 Crew does NOT work with Ranger XP 1000 or XP 1000 Crew. SPECS Heat Output - 13,000 BTU at 0-125 CFM Heater Box Dimensions 8.4 x 6.9 x 5.3. VERSATILE Don't loose cab space - tucks nicely under the dash 360 degree adjustable ventslouvers Built in shutoff valve Adjustable temperature and fan speed Heavy duty squirrel cage High performance alloy Y connectors 3 Year Warranty. QUALITY High-grade radiator hose rated -40 to 120 C Patented Unicoil High performance alloy Y connectors. INCLUDES Thermostat Bypass, defrost duct hoses, vents, connectors, radiator hoses, wiring harnesses, installation hardware and instructions.

Application For LS1 LS2 LS3 LQ4 LQ9. HOSE ENDS 58 and 34 Used to loop the heater hose outlets of your LSLT engine water pump. HEATER CORE Delete Water Pump Bypass Hose. Our custom molded hose goes on your LS water pump and loops the heater hose lines.. EASY TO CLEAN Oil, Coolant and Fuel-Resistant Finish.

for LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77. HOSE ENDS One end is 58 and the other is 34.. Good for deleting the heater on your LS swapped vehicle.. EASY TO CLEAN Oil, Coolant and Fuel-Resistant Finish. LS heater core bypass hose used with vehicles that are no longer using the heater core..