Material CVLIFE bipod is made of aluminum and lightweight high-strength polymer. The rifle bipod is designed to significantly reduce weight, 1.1 pounds, it provides a solid, stable shooting platform. Easy to Install The bipod compatible with mlok bipod can be directly attached to the m-rail, is quickly installed and removed using a hex wrench, can be tightened safely and easily, and comes with an extra set of longer screws. Height Adjustment The bipods for rifles legs extend from 8 to 11 and slide and lock securely at 7 grooves with the push of a button, allowing for positioning at the desired height. Rotation and Tilt By rotating the bottom knob, the bipod for rifle has the function of 360-degree horizontal rotation and left and right tilt, which can easily track moving targets or adjust the shooting angle, providing flexibility for shooting. Foldable Legs The rifle bipod has 5 fixing grooves on the shoulder, can be folded legs forward or backward, and provides 45 and 135-degree leg fixing angles.

Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight. With the spring on both legs, you could fold the legs up easily and keep silent when hunting. With integrated design, the bipod is built with the quick release picatinny adapter, which enables you to install and disassemble it from the rifle conveniently and quickly. 5 Settings of leg length. It can be adjusted from 6 inches to 9 inches. Slightly pressing the button, you can adjust the length to meet different needs when hunting. Anti-slip rubber on the bottom of the leg makes the bipods shockproof and antiskid.

Feyachi B13 Mlok Bipod Designed compatible with Mlok System, Directly Attach to the Rail.. Easy to Install, No Adapter Needed, Which Reduces the Weight from 11 oz to 8.7 oz.. Lightweight Aircraft Aluminum and Sturdy Hardened Steel Construction with Matte Black Finish. Soft Rubber Feet for Enhanced Stability.. Foldable and Adjustable, 6-9 Bipod Has 5 Settings for Different Height Adjustments, It's Ready to Meet All Situations.. Low Profile B13 Bipod Securely Fit Your Rifle on Mlok Handguard and Create the Ideal Shooting Experience..

Rapid leg deployment with efficient single-handed adjustability Rapid-attach, self-locating stainless-steel mounting system mounts to Uncle Mikes Sling Studs on narrow or wide mounting locations, while also providing a quick detachment capability. High strength reinforced injected molded polymer, steel and Mil-Spec hard anodized 6061 T-6 aluminum construction Uncle Mikes-style sling stud on rear of mounting body. Plus or Minus 25 degrees of tilt about the longitudinal axis for a total of 50 degrees. Adjustable friction knob for setting tilt and ease of movement Individually adjustable leg lengths in 0.5 increments for a total of 7 positions. Removable rubberized feet are compatible with BT Industries Atlas pattern replaceable feet Quiet and positive leg deployment, adjustment and stowage.

Rotatable and Tiltable The CVLIFE bipod features rotate 360 degrees horizontally and leftright of tilt which can be adjusted and locked into position by looseningtightening the bottom adjustment knob, offering serious strength and versatility.. High Quality The bipod for rifle is made of aluminum and polymer, and internal parts are made of metal components, with a sturdy and portable structure, it is easy to install and lightweight.. Height Adjustable The rifle bipod legs are notched with 6 height settings, can extend from 7.8 to 10.6 by pressing the leg release button. The legs can be set in symmetrical or asymmetrical heights to account for variations in terrain and shooting positions.. Easy to Carry To stow the tactical bipod legs, press the foldable leg button and rotate the legs forward or backward until they are parallel with the middle component and the notches positively engaged.. Anti-Slip Rubber Feet The shooting bipod features rubber feet pads which provide a stable, non-marking platform..

Made of lightweight Mil-Spec hard anodized 6061 T-6 aluminum and Injection-molded polymer Aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments quickly and quietly transitions between countless user configurations. Easily loaded with stabilizing forward tension without fear of failure or warping At just over 11 ounces, the Magpul bipod is lighter than many pricier bipods currently on the market. Spring-tension legs stow neatly forward and snap down and lock into place with one hand Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. An industry-exclusive 50 degrees of total tilt and 40 degrees of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.

Sturdy Made The rifle bipod is made of aluminum and polymer with metal components inside, has a sturdy and stable structure, is easy to use and lightweight. Versatility Bipod The CVLIFE bipod head can be rotated 360 degrees horizontally and tilted left and right by turning the bottom knob, providing multi-directional positioning shooting. Leg Adjustable The legs of the picatinny bipod have 6 height settings and extend from 7.8 inches to 10.6 inches with the push of a leg release button to accommodate changes in terrain and shooting position. Foldable Legs To fold the legs of the shooting bipod, press the foldable leg button and rotate the legs forward or backward until they properly engage with the notches. Non-Slip Threaded Rubber Feet The soft rubber feet of the bipods for rifles hold fast on a variety of shooting surfaces, providing a reliable and stable shooting platform.

Lightweight and Portable Our CVLIFE bipod for rifle is made of lightweight aluminum and a non-rust black anodized finish making it less bulky. Easy to Install Compatible with mlok bipod can be attached to the m-rail directly in seconds. No need adapter, your stuff will be more compact. Adjustable Legs The rifle bipod can be extended from 6 to 9 inches. With the release button, you can adjust the height to the exact level easily and quickly. Easy to Carry The legs of bipods for rifles can be folded back up into the initial position just as easily for easy carry and storage. Sturdy and Stable The m lock bipod with rubber feet provide strong support for any kind of terrain, they are sturdy and dont wiggle.

Better Construction The first standout feature of the CVLIFE shooting bipod is its construction. Made from durable and lightweight materials, made of hardened steel and aluminum. It provides a dependable, stable shooting platform. It weighs 11 ounces and exhibits excellent build quality, ensuring that it can withstand the rigors of outdoor use.. Sling Stud Mounting System Attaching and detaching the CVLIFE bipod is quick and easy with its rapid-attach sling stud mounting system. It also has an extra sling loop so you can attach a rifle sling rope to it.. Easier installation and Adjustment Self-locating, stainless steel clasps ensure perfect alignment when mounting, and the large thumb wheel allows for a strong hold and easy tightening, allowing you to customize the mounting tension to suit your preferences.. Six-level Height Adjustment The bipod's compact size and folding capability also make it convenient for transportation and storage. The adjustable legs of the rifle bipod offer great versatility, from 7.5 to 10.6 inches. The pivot bipod locks into place with a satisfying click, ensuring a tight fit.. Anti-Slip Rubber Feet Anti-slip Rubber feet, even in very cold temperatures. Can preload reasonably well on concrete shooting benches, mowed grass, roofing shingles, and asphalt pavement. With rail-loaded detents, you can easily extend or retract the legs to find the desired height and position. NOTICE Adapter not included.Applicable for sling swivel stud rifle..

Strong Durable Construction The CVLIFE Bipod combines lightweight aluminum and high-strength polymer, weighing under 1 pound for easy carry. It is built tough to deliver a rock-solid and reliable platform. Easy Secure Mounting The sling stud mounting system allows for quick and easy installation and removal of the bipod the self-locating stainless steel buckle ensures a secure fit and alignment when mounted, and the ergonomic bottom knob allows for easy tightening. Versatile Height Angle Adjustment With 7 positive locking positions, you can easily adjust height from 8 to 11 inches. The Sling Mount Bipod has 5 different leg angles, which can be easily folded and adapted to various terrains for optimal stability. Non-Slip Rubber Feet The bipod features a non-slip rubber foot pad to provide a stable platform in harsh environments. Enhanced Stability Engineered to provide a consistently steady platform, minimising movement and improving accuracy across various scenarios. NOTE The Sling Stud bipod cannot swivel from side to side. Pica and M-Rail adapters are not included. Designed to mount to Sling Swivel Stud.

Dynamic Terrain Adapts Features left-right tilt and swivel, maintaining stability on uneven terrain such as steep slopes and rocky ground. Multiple Compatibility Sling stud bipod attaches to the sling stud system or bipod mount adapter Note Adapter not included. Equipped with a sling loop to connect the rifle sling. Easy to Use Rifle bipod sling swivel stud mount enables quick and smooth attachment or detachment by metal clamp adjustment knob. Self-aligning and deepened clamp ensure secure installation without marring equipment. Height Adjustment Legs of bipods for rifles can lock at 6 positions for center height adjustment from 7.6 to 10.5 inches, and folded back and forth for easy carrying. Stable Sling swivel bipod with non-slip threaded rubber feet pads can be firmly fixed on the ground and reduce vibration.

ENHANCED COMPATIBILITY - This S Lock replacement is precisely engineered to fit a wide range of popular Harris-style bipod models including the 1A2, 1A3, 1A4, 1C2, 1C3, 1C4 series and their L Leg Extension variants, ensuring a perfect fit and restored functionality.. SECURE LOCKING MECHANISM - Features a robust swivel stud locking design that firmly attaches your bipod, providing exceptional stability during shooting and preventing unwanted movement for improved accuracy.. DURABLE CONSTRUCTION - Manufactured from high-strength materials to withstand rigorous field use, this replacement part offers superior resistance to impact and wear, delivering long-lasting reliability for serious shooters.. COST-EFFECTIVE UPGRADE - Restore the performance of your valuable bipod at a fraction of the cost of a full replacement. This reliable S Lock ensures your equipment maintains peak operation for precision shooting and hunting.. Trusted by Marksmen Used in 50 competitive shooting events includes a silicone grip pad to protect your rifle..

Easy to InstallThe rifle bipod can be attached to the m-rail directly. The installation will be better without adapter.. High QualityOur bipod for rifle is duty and light weight, made of high-quality aluminum alloy and polymer, non-rust black anodized finish.. Adjustable LegsWith the leg release button, the central height of the bipod can be adjusted from 7.5 inches to 9 inches. 5 settings for different length, the bipod is ready to meet your needs.. Easy to CarryThe bipod legs have 5 fixed locking positions and can be folded forward and backward for easy portability.. Adjustable and LockableFully adjustable and lockable legs with quick retraction features make the clamp-on bipod a wonderful choice for shooters and outdoor sports enthusiasts..

Easy to Use The adjustable legs of the rifle bipod offer great versatility, from 7.5 to 10.6 inches. You can easily extend or retract the legs to find the desired height and position. It doesn't have outer springs that create more bulk like other models. The pivot bipod locks into place with a satisfying click, ensuring a tight fit.. Unique Design The first standout feature of the Cvlife Quick Release Bipod is its construction. Made from durable and lightweight materials, it strikes an ideal balance between strength and portability. The bipod feels solid in hand and exhibits excellent build quality, ensuring that it can withstand the rigors of outdoor use.. Tilt 360 degrees Swivel function With the ability to swivel left or right and 360 horizontal rotation, you can track moving targets or adjust your shooting angle with ease. The smooth rotation is aided by the tension adjustment knob, which allows you to customize the swivel resistance to suit your preferences.. Quick Release Connector Compatible with Picatinny, it provides a secure and reliable mounting solution. The installation process is straightforward, allowing for quick attachment and detachment as needed. Adjust the width and level lock to fit different Picatinny.. Anti-Slip Rubber Feet The bipod's compact size and folding capability also make it convenient for transportation and storage. Anti-slip Rubber feet, even in very cold temperatures. Can preload reasonably well on concrete shooting benches, mowed grass, roofing shingles, and asphalt pavement..

Carbon Fiber Bipod Built With lightweight carbon fiber and quality aluminum for a strength-to-weight ratio ensuring steady support without losing mobility in rugged outdoor environments. Adaptive Cant Design The pivot bipod features a 20 bi-directional cant for stability leveling on uneven ground. Quick s-lock lever for easy adjusting and locking direction. 6-9 Inch Height Adjustment Press-button legs adjust heigh quickly with notched indexing. Fold design ensures compact transport. Rubberized feet prevent slippage in shooting. Rubber Base Soft rubber base reduces rifle shake while preventing scratches, absorbs vibrations, ensuring steady shooting in multiple environments. Easy to Use The tilting bipod is compatible with mlok systems and sling swivel studs. Includes m-rail adapter. For attachment to most rifle forends.

Our bipod is exceptionally high-strength and light-weight, which is 100 made of real carbon fiber , aluminum alloy and hardened steel.. Fast Easy to install Put the adapter into the M-rail and tighten it by hex wrench, loose the thumbscrew and connect the stud of the adapter to the bipod clamp, tighten the thumbscrew.. With corrosion resistant and wear-resistant function, the carbon fiber bipod is built to perform different environment especially harsh condition like raining and sandstorm,etc.. This bipod has robust springs tension control and leg release button, the leg length can be adjusted from 6 inches 152mm to 9 inches 225mm.. The rubberized feet is non-slip and stable in order to reduce recoil damage from the gun.Also, it gives a strong support during the shooting or hunting..

Bipod Material The rifle bipods for hunting rifles are made of aluminum and polymer, weighing only 0.88 lbs, making it portable, lightweight and suitable for outdoor use. Adjustable Head This picatinny bipod features a head that can rotate 360 degrees horizontally and tilt left and right, which helps to quickly lock onto and shoot targets. Rifle Bipod Height It can be adjusted via buttons on the legs, featuring 6 height settings ranging from 7.8 to 10.6 inches. This allows for switching to the appropriate fixed height depending on the shooting environment. Quick Release Bipod This qd bipod features a lever lock at the head for rapid installation and removal. After the width adjustment, subsequent installations can directly connect to the picatinny. Foldable Legs This bipods for rifles have 5 leg fixing slots, and the leg position can be adjusted by pressing the side button.

The bipod is compatible with mlok bipod, made of durable aluminum alloy and polymer, the center height can be adjusted from 7.5 to 9 inches to meet different height requirements.. Rifle bipod base is designed as a sphere, which can be rotated 360 degrees and tilted left and right, the S-lock to lock the direction simply and quickly.. The bipod for rifle has 5 positive-locking positions and can be folded at different angles, which is convenient for carrying and using.. The legs of the bipods have 5 settings that can be locked and extended, with return springs, which quickly retract the legs of the bipod.. Spiral rubber feet are shockproof and non-slip, suitable for various usage environments..

Adjustable leg length with 5 settings, you can adjust the length to meet different needs while hunting.. The bipod for rifle comes with a quick release adapter, which enables you to install or disassemble on picatinny rail conveniently and quickly.. Our picatinny bipod provides a stable shooting platform for accurate and precise shots.. Made of high-quality aluminum, this bipod is built to last. Legs can be locked in place for added stability.. Foldable legs with robust external spring tension control..

Carbon Fiber Material The picatinny bipod feature 30 carbon fiber and polymer, making it lightweight and sturdy. It provides stability for shooting while reducing weight. Quick Release Design Rifle bipod features a quick-release lever design. After adjusting the mount width for initial use, it can be easily released and locked though the quick-release lever. Swivel and Tiltable Quick release picatinny bipod for rifle can be rotated 360 degree and tilted left and right via a knob, allowing for quick adjustment of the shooting angle. 6 Height Adjustments The carbon fiber bipods for rifles can be adjusted to 6 different heights, ranging from 7.8 to 10.6 inches. It can be adjusted by pressing the height adjustment button. Foldable Bipod The legs of bipod for rifle can be adjusted forward and backward. Press the folding leg button to adjust the leg direction, and lock it in place in the groove.

Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is heavy-duty and lightweight.. Loosing the bottom screw of the picatinny bipod to swivel the top adapter, you can adjust any angle you want. When tighten the bottom screw, the adapter will be secured, which provides you a steady support.. With the spring on both legs, you could fold the legs up easily and keep silent when hunting.. 5 settings of leg length. It can be extended from 6 inches to 9 inches. Slightly pressing the button, you could adjust different length you want.. High quality rubber on the bottom of the leg makes the picatinny rail bipod shockproof and antiskid..

Our rifle bipod is made of 100 real Carbon fiber rods of each leg, and the weight8.8oz of this bipod is lighter than other metal aluminum bipod while strength is higher than them.. This picatinny bipod for rifles can be adjusted from 6 to 9 inches with return springs and leg release buttons.. This bipod is highlow temperature resistance and corrosion resistant in any environment, and it can hold the rifle more stably and shoot more accurately.. The surface of this picatinny bipod is more slippery, the pattern looks more stylish. From different perspectives, the surface will reflect various patterns, which makes your bipod distinguish from others.. Adjustable leg length 5 settings for different lengths, the bipod is ready to meet your needs. You can install the bipod to your rifle conveniently with the mount adapter and installation accessories..

Better Construction Rifle bipod made of alloy steel and polymer, easy to use and lightweight, excellent bipod structure, providing a stable and sturdy platform that can withstand different impacts.. Multi-compatible The bipod with a picatinny adapter is compatible with picatinny or sling swivel studs and is quick and easy to attach and remove. There is a sling loop on the back for the sling to connect.. Easy to install Only turn the bottom knob screw, the bipod base with silicone pad can fit stock of various sizes, providing ideal load distribution without leaving marks.. Adjustable Bipod Adjustable notch leg design, no shaking when in use, can be folded forward and backward, easy to store and carry, the center height of the picatinny bipod can be adjusted from 7.7 to 10.6 to meet your hunting or shooting needs. Anti-slip and Anti-shock Screw-in rubber feet can be preloaded reasonably on gently undulating surfaces, to adapt to various terrains..

Coming with Picatinny adapter, the bipod can be quickly attached or detached by using the swivel stud.. Adjustable leg length 5 settings with return Springs, you could adjust the length to meet different needs when hunting.. Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight.. High quality rubber on the bottom of the leg makes the bipods shockproof and antiskid.. External springs control the legs more stably and deploy quickly..

Lightweight and Sturdy Made of sturdy and durable Aluminum and Polymer, only at 0.88 lbs, this rifle bipod increases multi-angle folding legs, meets more shooting requirements, and provides a stable shooting platform. Easy to Use and Adjust Installing and removing the sling stud bipod is simple and quick,self-locating stainless steel clasps, strong when in use and fixed in the closed position, rotating bottom adjustment knob that steel buckles on the sides are perfectly aligned. Traceless Connection Bipod for rifle with over-molded silicone pad base allows for secure attachment to various products without damaging the paint job. There is a sling loop on the back for the sling connection. Adjustable Height Six height adjustments, the center height can be adjusted from 7.5 to 10.5 inches, and the uneven ground can be kept level, press the leg release button to adjust the bipod height. The wrapped streamlined legs, increase the grip when using. Anti-slip The rubber non-slip pads on the legs can be firmly fixed on the shooting surface, and are not affected by the environment during use. They can be used on harsh and bumpy ground. Note The sling swivel stud bipod does not include an adapter.

Better Construction CVLIFE bipod is made of Lightweight and high-strength Alloy Steel and Polymer, which has a good feel, is non-rust, and durable.. Multi-Compatible Bipods compatible with mlok bipod and sling stud. There are extra rings on the side, and you can tie the slings to them.. Height Adjustment Six grooves adjustment, bipod for rifle whole height can be extended from 7.7 to 10.6 inches, to meet different height requirements.. Sturdy and Stable Adjustable notched legs design, the rifle bipod is sturdy and will not shake easily during use, which is more stable than others.. Easy to Use Just install by simply rotating the bottom knob screw to attach the swivel stud, and the bipod comes with an adapter compatible with mlok..

Adjustable leg length 5 settings with return Springs, you could adjust the length to meet different needs when hunting.. Press the button,the legs can eject fully and quickly.The length of legs can be adjusted from 6-9 inches.. Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight.. Durable with new design high quality that you can quickly attaches to sling swivel stud.. NOTICE Adapter not included. Applicable for sling swivel stud rifle..

This rifle bipod coming with M-rail adapter and the Allen wrench, the bipod can be quickly attached or detached by using the swivel stud. This bipod is made of hardened steel and aluminum, non-rust black anodized finish, the bipod with sling stud is durable and lightweight. The bipods for rifles with adjustable extension leg slide and lock securely with a button. 5 notches for different length to meet your needs. Bipod for rifle sling stud with non-slip rubber feet provide a strong support for any kind of terrain, they are sturdy and dont wiggle. The legs of the bipod have spring tension control and can be easily folded back to the original position for easy portability and storage.

Easy adjustments Each bipod leg has 5 positions 0, 45, 90, 135 and 180 degrees. 5 locking detents for different leg lengths, the central height of the bipod can be adjusted from 6 inches to 9 inches, providing varied bipod positioning to fit different terrain heights.. Built in pan cant A glove-friendly knurled thumb screw knob with spring tension joint provides 180 degrees pan and 30 degrees cant, allowing easy adjustment between shots.. Accessories Metal spike feet and rubber feet are exchangeable, helping to hold the weight of your rifle even on the improper surface and improving shooting stability. Simply press in the detent pin with a bullet tip or something similar can detach the feet from the legs.. Premium materials It is made of 7075-T6 aluminum that is Mil-Spec Type III hard coat anodized and has heat treated stainless steel components., making the bipod very sturdy.. Easy mount Directly mounts to any M-LOK compatible systems, a set of hex key wrenches included in the package..

Carbon Fiber Bipod MlokOur bipod is made of carbon fiber, aluminum alloy, and hardened steel, making it both strong and lightweight. It is designed to withstand harsh environments, including rain and sandstorms, and is resistant to corrosion and wear.. Quick Release Adapter The bipod for rifles comes with a Mlok Adapter, which enables you to install or disassemble on M-rail conveniently and quickly to save time, especially during fast-paced changes in outdoor environments like hunting.. Easy to use The bipod is designed for easy and fast installation. To install it, insert the adapter into the M-rail and tighten it with a hex wrench. Then, connect the adapter stud to the bipod clamp and secure it with the thumbscrew.. Adjustable Leg Length The rifle bipod has foldable arms and external spring tension control. It features five settings for adjustable leg length with return springs. This allows for easy adjustment of leg length from 6 inches 152mm to 9 inches 225mm. The bipod can be adapted for bench rest shooting, prone shooting, or use at the shooting range.. Rugged and Sturdy Build Equipped with rubberized, non-slip feet, the bipod offers reliable support and minimizes recoil impact on the rifle. This design promotes increased stability and precision for shooting or hunting endeavors..

Material Our CVLIFE Bipod is made of aluminum alloy, which is solid and light-weight. Solid Mountings Originally fitting picatinny rail, this picatinny bipod comes with barrel adapters for standard barrel. Sturdy, non-rust and portable. Please note that the barrel adapter only fits 0.47 to 0.78 inch barrels. Spring Tension Control This rifle bipod has robust springs tension control and leg release button, the leg length can be adjusted from 6 inches to 9 inches. Extendable legs with Spring Tension The spring design to make the extension super convenient. Only slightly twist the patterned pad, the bipod can be extended from 6-9 inches. Non-slip Rubberized Feet The rubberized feet pads are non-slip and shock-proof.

Sturdy construction This bipod is made of hardened steel and aluminum, also has a carbon fiber material, non-rust black anodized finish the bipod is duty and lightweight and it can attach to a swivel stud. Pivot and tilt adjustment This rifle bipod will allow the shooter to compensate for ground that is unlevel by up to 20 degrees. Extend leg With a touch of button, the leg will instantly spring out. The legs are notched for easy indexing to a specific height. Stable Forend pads prevent from scratching meanwhile increase the friction. Soft rubber feet provide enhanced stability. Spring control help bipod quickly arrange and lock into place. With Accessories Picatinny adapter and S lock are included also for convenient operation.

RAPID ONE-HANDED Operation and Full Adjustment on the fly. ADAPTS To Any Terrain Creating Solid, Stable, and Accurate Positioning. 4 LOCKING POSITIONS In 0 Degrees, 50 Degrees, 90 Degrees, 180 Degrees. DURABLE DESIGN and Drop Tested. FULLY COMPATIBLE with Pic-atinny or ARCA RSS Dovetail.

Made of high quality aluminum construction with black anodized finish.. Fits on rails and works with the most common bipods in the market,can also be used as a sling stud when bipod is removed.. Upgraded T-nuts design increases width to provide a sturdy support for bipod. Two convex blocks on both sides can resist much more recoil to provide a solid stability.. Comes with extra set of the screws and T-nuts for further using.. Enhanced sling stud won't strip off..

High QualityThis bipod is made of hardened steel and aluminum, a non-rust black anodized finish the bipod is duty and lightweight and it can attach to a swivel stud.. Stable BipodOur bipod for rifle will allow the shooter to compensate for ground that is unlevel by up to 20 degrees.. Adjustable LegsWith a touch of a button, the leg of the bipod will instantly spring out from 6-9 inches. The legs are notched for easy locking to a specific height.. Safety ProtectionForend pads of our bipod prevent scratching meanwhile increase friction. Soft rubber feet provide enhanced stability. Spring control helps the bipod quickly deploy and lock into place.. Easy to UseOur bipod is equipped with a quick lock lever, and the tension knob can be easily controlled. Also equipped with a Picatinny adapter and can be used as a Picatinny bipod..

Aluminum Material Built with lightweight yet sturdy aluminum, this hunting bipod compatible with mlok is easy to handle. Leg Direction Adjustable Rifle bipod features legs that adjust to 5 directions 180 front and back. It can also be used for hunting and shooting on uneven terrain. Retractable Bipod Customize your setup with 5 height options 7.5-9 inches. Press the strong loaded tension clamp to adjust the leg length, lock it with locking thumb wheel. Rifle bipod ensures stability for shooting scenario. Easy to Install Designed for M-rail, bipod for rifle installs effortlessly using the included hex wrench. Tighten bolts in a T-shape to ensure proper installationno extra adapters needed. Foldable and Portable The forward-folding legs make M-rail bipod easy to carry without interfering with your shooting. Its compact design facilitates hunting and outdoor use.

High QualityOur CVLIFE bipod compatible with mlok bipod is made of 100 real Carbon fiber, lightweight aluminum and a non-rust black anodized finish making it less bulky 0.54 lbs and more durable than others.. Easy to InstallThis bipod for rifle can be attached to the rail directly in seconds. No need adapter, your stuff will be more compact.. Adjustable LegsThe rifle bipod can be extended from 6 to 9 inches. With the release button, you can adjust the height to the exact level easily and quickly.. Foldable LegsThe legs can be folded back up into the initial position just as easily for easy carry and storage.. Sturdy and StableRubber feet provide a strong support for any kind of terrain they are sturdy and dont wiggle..

Quick Release System The Picatinny bipod features a quick-release system for fast and easy installation and removal of the Picatinny rails, making installation simple and convenient. Unique Design Made of lightweight and durable aluminum alloy and high-strength polymer, this CVLIFE bipod is durable and reliable. The unique streamlined design combines ergonomics, functionality, and strength innovation to meet different shooting needs while reducing weight for easy portability and stable structure. 360-Degree Swivel and Tilt By loosening the locking knob, the rifle bipod for Picatinny can rotate 360 and tilt left or right, and by tightening the locking button, the rotation and tilt angles are fixed, allowing you to track moving targets or adjust shooting angles easily. Adjustable Height The bipods for rifles have seven height settings. When the legs are unfolded, the height can be extended from 8 inches to 11 inches to meet the needs of different terrains. Sturdy and Solid Support The CVLIFE bipod for rifles has 5 adjustable angles to meet the needs of different terrains. It can also be easily folded forward and backward, compact in structure, and easy to carry and use. Anti-Slip Rubber Feet The rubber feet adopt a threaded design, which has anti-slip and shock-proof functions and can be firmly fixed on various shooting terrains, thereby enhancing shooting stability.

Suitable for Sling StudThis picatinny bipod is easy to attached to sling stud. In addition, this bipod can be easily mounted or removed through the thumb screw at the bottom.. Adjustable and FoldableThe length of the leg can be adjusted from 6 inches to 9 inches by pressing the return spring and leg release button. This rifle bipod has 5 leg dents designed to keep your bipod firmly in place at different heights. The bipod legs are foldable, which make it easy to carry and storage.. Scratch-ResistantForend pads prevent your picatinny rail from scratching, which can slow down the aging rate of bipod and picatinny rail.. Sturdy and DurableMade of hardened steel and aluminum, non-rust black anodized finish, the bipod fir rifle is duty and light weight. The bipod for picatinny is firmly anchored to the ground when you are hunting or shooting, and can't be damaged by strong recoil.. Skid Resistance and ShockproofHigh quality rubber on the bottom of the bipod legs makes the bipod shockproof and antiskid..

Adjustable leg length with 5 settings and return Springs, you could adjust the length to meet different needs when hunting. Press the button,the legs can eject fully and quickly.The length of legs can be adjusted from 6-9 inches. Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and lightweight. Durable with a new premium design that you can quickly attach to the sling swivel stud. Notice Adapter not included. Applicable for sling swivel stud.

High Quality The bipod is made of aluminum alloy, which is solid and lightweight.. Multiple Mountings Originally fitting picatinny rail, this versatile picatinny bipod comes with barrel clamp adapter and picatinny swivel converter for swivel stud mount. Please note that the barrel adapter only fits 0.47 to 0.78 inch barrels.. Extendable Legs with Spring Tension The inside spring design makes the extension convenient. Only slightly twist the patterned pad, the rifle bipod can be adjusted from 6.3-7 inches.. Foldable Design The tactical bipod can be easily folded by pressing the round button. This design is great for carry and storage.. Non-slip Pads The rubberized feet pads are non-slip and shock-proof..

Broad Compatibility Perfectly fits S Swivel type Harris bipods replacing their original swivel housing and Atlas NC bipods using factory hardware QD and NC models only. Fully compatible with all standard 1.5 Arca dovetail rails, making it a versatile addition to any precision rifle setup.. Quick Secure Mounting The Arca Lock Clamp features a precision screw knob for tool-free, rapid adjustments, ensuring a tight, wobble-free connection between your bipod and rail. The Harris Swiveling Adapter enables swift gear swaps, so you can focus on accuracy without delays.. Premium Durability Machined from solid blocks of 6061-T6 aluminumrenowned for strength and corrosion resistancewith a long-lasting anodized coating. Stainless steel hardware and beveled edges minimize snagging, ensuring longevity even in harsh environments.. Lightweight Compact Design Total weight of just 4.8 ounces 3.2 oz for the clamp 1.6 oz for the adapter adds minimal bulk. Compact dimensions Clamp 2.9 1.6 0.8 in Adapter 1.6 1.3 1.3 in keep your setup streamlined and easy to handle.. Complete Kit Lifetime Warranty Includes 1 Arca Lock Clamp, 1 Harris Swiveling Bipod Adapter, 2 M4 screws, and 1 3mm Allen wrencheverything needed for straightforward installation. Backed by a lifetime warranty, ensuring confidence in your purchase..

Coming with adapter and the Allen screw, the bipod can be quickly attached or detached by using the swivel stud. Made of carbon fiber, this bipod is more slippery, the pattern looks more stylish. The adjustable leg can be extended from 6-9 inches. 5 setting of legs meet your different needs. Non-slip rubber on the bottom of the leg makes the bipods shockproof and antiskid. Foldable arms controlled by robust external tension-spring.

Compatible with Harris Bipod Mlok Our pivot tension lever is designed to upgrade Harris Bipod Mlok systems, allowing for faster, tool-free adjustments while improving field responsiveness and locking accuracy.. Works with Mlok Bipod Platforms This lever fits most Mlok Bipod setups, enhancing your bipod's performance with smoother pivot resistance control. A tactical essential for fast deployment and repositioning.. Upgrade for Harris Bipods Replace your standard nut with this precision lever tailored for Harris Bipods, providing better control, easier use, and a more ergonomic adjustment experience.. Ideal for Harris Bipods for Rifles A perfect match for Harris Bipods for Rifles, this tension lock gives rifle shooters enhanced flexibility in dynamic conditions. Enjoy improved aim and quick-lock capability.. Compatible with Mlok Bipod Mounts Designed to fit any standard Mlok Bipod Mount, this lever ensures solid compatibility with modular handguards, maintaining tight engagement under repeated use and recoil..

Made of hardened steel and aircraft aluminum, this rifle bipod withstands strong impact. Weight capacity is over 8 lbs, sturdy enough to support most of your stuff. Suitable for range shooting and hunting. Note this product does not come with adapter Compatible with most sling swivel stud, this bipods for rifles mounts via sling swivel stud and retains a sling attachment point, no need other tool, easy to attach and you don't sacrifice any functionality. Springs on both legs help you deploy this sling stud bipod immediately and hold the legs firmly to provide a stable support. This bipod can fold for storage. The height of bipod swivel stud mount is adjustable from 6-9 inches, exactly adapting to any position. Press the leg button, the leg will eject automatically. Both legs have 5 notches to adjust height, making it used on uneven terrain. Textured rubber feet not only make rifle bipods for hunting rifles shockproof and antiskid, but also meet different terrain like grass, dirt, rocks, concrete and wet conditions.

The BT65 mounts directly to any 1913 style Picatinny rail via a low profile two screw clamp assembly.. Height Range 4.9 - 9.2 6.4 at 90. Weight 12.9 ounces. Available in black only Made in USA. Preloaded Cant 63 degrees. Position Button 0.5 diameter. 5 leg positions 0, 45, 90, 135 180 degrees. Non-Rotating Legs outer leg does not rotate around inner leg. Footprint 912.5. Included in the bundle USA Flag Patch and Jestik Microfiber Cleaning Cloth.

Made of LIGHTWEIGHT MIL-SPEC hard anodized 6061 T-6 aluminum and Injection-molded polymer aesthetically pleasing, LOW-PROFILE DESIGN conceals its mechanisms and hardware, smoothly brushing off Snags and bumps. Optimized for RAPID ONE-HANDED ADJUSTMENTS quickly and quietly transitions between countless user configurations. Easily loaded with STABILIZING FORWARD TENSION without fear of failure or warping at just over 11 ounce , The Magpul bipod is LIGHTER THAN MANY PRICIER BIPODS currently on the market. SPRING-TENSION LEGS stow neatly forward and snap down and lock into place with ONE HAND LEG EXTENSIONS slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. An INDUSTRY-EXCLUSIVE 50 of TOTAL TILT and 40 of TOTAL PAN are Controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.

Mounts Directly to any 1913 Style Picatinny Rail via Included ADM 170-S Lever. Height range approximately 5.2 - 9.6. Weight 13.61 ounces. Available in black only Made in USA. 5 leg positions 0, 45, 90, 135 180 degrees. Footprint 811. Preloaded Pan 30 degrees. Preloaded Cant 30 degrees. Position Button 0.5 diameter. Included in the bundle USA Flag Patch and Jestik Microfiber Cleaning Cloth.

Mounts Directly to any 1913 Style Picatinny Rail via a low profile two screw clamp assembly. Height range approximately 4.8 - 9.1 6.3 at 90. Weight 11.0 ounces. Available in black only Made in USA. 5 leg positions 0, 45, 90, 135 180 degrees. Footprint 811. Preloaded Pan 30 degrees. Preloaded Cant 30 degrees. Position Button 0.36 diameter. Included in the bundle USA Flag Patch and Jestik Microfiber Cleaning Cloth.

Country Of Origin China. The Package Height Of The Product Is 4 Inches. The Package Length Of The Product Is 9 Inches. The Package Width Of The Product Is 6 Inches.

With a touch of button, The legs are adjustable from 6to 9 . Notched legs in 1 increments. Legs are spring loaded, for fast deployment.. Our rifle bipod is made of Carbon fiber rods of each leg, it is lighter than other metal aluminum bipod while strength is higher than them.. Attaches to the sling swivel stud or Bipod Adapters to picatinny rail or handguard.. Swivels tilts to compensate for uneven terrain. This is very convenient when shooting from areas with a constant angle or uneven ground.. This bipod is equipped with S Lock Ratchet Lever, Replaces the Tension Adjusting Knob for an easier and firmer Level Control.. Made of aluminum alloy and carbon fiber, Ultimate Lightweight yet Rock Solid, for enhanced stability..

Quick Detachable Picatinny Base Designed To Mount Onto The Top Or Bottom Picatinny Rail Of Handguards. 3 Position Folding Legs Equipped With Rubberized Foot Pads With A Wide Open Angle For Improved Stability. Lockable And Height Adjustable Legs Provide A Center Height From 7-11 And Features 22 Panning And 44 Tension Adjustable Left And Right Tilt. Posi-Lock Push Buttons Feature A Large Surface Area For Easier Use While Wearing Gloves. Matte Black Anodized Aircraft Aluminum Construction With Reinforced Steel Components.

Extends From 6 To 9. Leg Notches In 1 Inch Increments. Made In The Usa. Package weight3.0 lb.

Harris Engineering. Scrimshaw BiPod. A225C.

Foldable arms with robust external spring tension control, making the bipod easy for storage or carry,bipod's legs fold up and retract quickly by pressing retraction button when not in use.. Made of hardened steel and high grade aluminum, fine black anodized finished. Heavy duty and light weight.. Tiltable - This function enable you to rotate the gun from side to side and counter the uneven ground. And pivote the gun left or right side vertically moving from a fixed position. Rubberized pad eliminate loosenes or tremor in crotch area of bipod.Avoid slip and scratch your facility.. 3 Settings for 3 different leg length from 13 to 18 and 27 inch with Posi-lock wheel and quick retraction button..

Allows for the quick attachment of Harris-style stud mounted bipods to MLOK compatible hand guards. Bipod Mount provides a low profile, closer to the mounting surface.. anodized aluminum construction. Beveled ends and corners to reduce snags and sharp edges.

Allows for the quick attachment of Harris-style stud mounted bipods to compatible hand guards. Bipod Mount provides a low profile, closer to the mounting surface.. anodized aluminum construction. Beveled ends and corners to reduce snags and sharp edges.

Rotates To Either Side For Instant Leveling On Uneven Ground. The Hinged Base Has Tension Adjustment And Buff Springs To Eliminate Tremor. The Legs Eject By Spring Action. Country Of Origin United States.

DIMENSIONS 6-9 height and weighs 12 oz. ACCURACY Notches are located on the legs for quick and easy indexing as well as an 18 degree bi-directional cant. EASE OF USE Legs fold up for easy transport and will instantly spring out with the push of a button and the bipod mounts quickly on the forend sling stud. CONVENIENT Lightweight, quick-deployment aluminum legs and slim profile for movement heavy or prone shooting. SECURE Soft rubber feet for enhanced stability and a non-marring padded base for forend protection. VERSATILE Ideal for a variety of positions including prone on uneven ground or shooting from a stable table at the range. GUARANTEED This product is covered by a limited lifetime warranty provided by Caldwell. Please contact Caldwell customer service for assistance.

DIMENSIONS 9-13 height and weighs 13 oz. ACCURACY Notches are located on the legs for quick and easy indexing as well as an 18 degree bi-directional cant. EASE OF USE Legs fold up for easy transport and will instantly spring out with the push of a button and the bipod mounts quickly on the forend sling stud. CONVENIENT Lightweight, quick-deployment aluminum legs and slim profile for movement heavy or prone shooting. SECURE Soft rubber feet for enhanced stability and a non-marring padded base for forend protection. VERSATILE Ideal for a variety of positions including prone on uneven ground or shooting from a stable table at the range. GUARANTEED This product is covered by a limited lifetime warranty provided by Caldwell. Please contact Caldwell customer service for assistance.

This Bi pod is useful For Shooting Off The Bench.

Harris Bipods S-BRM Bipod M-Lok Mount 6-9 Black. Extends from 6 to 9. Direct attachment to a MLok Handguard only. Swivels tilts to compensate for uneven terrain. Notched Legs are spring loaded for fast deployment..

Heat treated steel. Hard alloys. Hard rubber leg caps. Polymer knob. Built-in sling swivel.

Country Of Origin United States. The Package Height Of The Product Is 4 Inches. The Package Length Of The Product Is 16 Inches. The Package Width Of The Package Is 6 Inches.

Wide 60 open angle for improved stability with independent tension adjustable 40 tilting and 28 panning left and right. Three-position foldable and center height adjustable legs lock with authority at each position and height. Tool-free tension adjustable QD Picatinny base with squared integral recoil lugs. QD rubber oversized feet for added traction, compatible with most aftermarket QD foot pads. Matte black anodized Aluminum and steel construction. Rated up to .50 BMG.

Fits all the S Series swivel bipods, replaces the Tension Adjusting Knob for an easier and firmer Level Control. Small size of the ratchet lever does not extend beyond the body of the bipod it is installed on. Allows Harris S series bipods to adjust the swivel tension quickly and easily by providing extra torque to adjust and lock the tension. Easy to use Adjustable ratchet lever replaces the thumbnut on bipods.

This bipod is made of strong steel and aluminum alloys, Resistant anodized finishHard rubber leg caps. This gives the shooter an additional advantage when shooting from hard surfaces.. With a touch of button, The legs are adjustable from 13 to 27 . Unlike short models, the support platform is made movable relative to the horizontal axis, which makes it possible to compensate for the unevenness of the support surface.. Attaches to the sling swivel stud or Bipod Adapters to picatinny rail or handguard.. Swivels tilts to compensate for uneven terrain. This is very convenient when shooting from areas with a constant angle or uneven ground.. This bipod is equipped with S Lock Ratchet Lever, Replaces the Tension Adjusting Knob for an easier and firmer Level Control..

The Arca Lock Clamp With the rapid adoption of ARCA rails in precision rifles, our ARCA clamp with Harris Swiveling Bipod Adapter allows for quick and secure mounting between the HARRIS S bipod and the rifle. Clamp directly bolts to Atlas Bipods using their factory hardware excluding the 2-screw bipods. QD and NC only. ARCA LOCK CLAMP Dimensions 6 3.5 2 in,Weigts 2.4 OZ. Harris Swiveling Bipod Adapter The Harris Bipod Adapter is compatible with any Swivel version of the Harris Bipods. It replaces the existing swivel houseing with the harris bipod adapter COMPATIBLE ONLY WITH S SWIVEL TYPE HARRIS BIPODS. Adapt your Harris Swiveling Bipod to our ARCALOCK Clamp Base or any other Atlas Bipod rail Adapter.HARRIS SWIVELING BIPOD ADAPTER Dimensions 1.5 1.5 1.5 in,Weigts 1.6 OZ. THE ARCA LOCK CLAMP WORKS ON ALL STANDARD ARCA1.5 DOVETAIL RAILS Making your Harris Bipod ARCALOCK compatible. STABLE AND DURABLE Precision machined from aircraft grade solid blocks of 6061-T6 with enough long time anodized treatment for higher durability,the hardware is stainless steel,beveled edges to reduce snagging. The Package Contains ARCA LOCK CLAMP x 1 HARRIS SWIVELING HARRIS SWIVELING BIPOD ADAPTER x 1 M4 SCREWS x 2 3MM ALLEN WRENCH x 1.

DIMENSIONS 31 L x 7 W x 5 H and weighs 8.5 lbs. DURABLE With a durable aluminum construction and large diameter aluminum legs, this rugged shooting rest is ready for all situations and terrains. EASE OF USE This stable shooting platform features an adjustment knob that controls up to 25 degrees of adjustment and a clamping head that pans 360 degrees with tension capabilities. VERSATILE Features a 3-position leg lock for use in the prone, kneeling, sitting and standing positions and can secure any weapon for hands-free use. BE PREPARED With retractable steel spikes, an integral bubble level and no-slip lever locks this tripod is secure, stable, quiet and ready for quick adjustments during that vital moment. GUARANTEED This product is covered by a limited 1-year warranty provided by BOG. For all your questions please contact BOG's customer service.

DIMENSIONS 6-9 height with a weight of 8 oz. ACCURACY Notches are located on the legs for quick and easy indexing, it can be tightened down with the leg locking knobs and features a quick release cam lever lock for added stability. EASE OF USE Legs fold up for easy transport and the bipod mounts quickly on the picatinny rail mount of the forend 1.5 long pic rail. CONVENIENT Lightweight, quick-deployment aluminum legs and slim profile for movement heavy or prone shooting. SECURE Soft rubber feet for enhanced stability and a non-marring padded base for forend protection. GUARANTEED This product is covered by a limited lifetime warranty provided by Caldwell. Please contact Caldwell customer service for assistance.

Quick Attach Release BipodThe quick release bipod design allows for fast and easy attachment and detachment.. Improved AccuracyBy providing a stable platform, this rifle bipod helps you stay on target and improve your accuracy. Rubber feet provide strong support for any kind of terrain.. Adjustable 5 HeightsAdjustable leg length 5 settings with return spring, the height of the tilt bipod can be adjusted from 7.5 inches to 9 inches.. Pivot BipodThis bipod for hunting and shooting is pivot model. When the ground is not level, it can tilt left and right and compensate for ground that is un-level up to 40 degrees.. Lightweight and PortableThe legs of the bipod for rifle can be folded forward and backward, making it an easy-to-carry..

With return springs and leg release button, the leg length can be adjusted from 9 to 13. Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.. Adjustable leg length 10 settings for different length, the bipod is ready to meet your needs.. Quickly attach to or detach from the handguard using existing swivel stud.. Super Light Weight Weighs under 0.78lb..

Designed for real fire caliber, no collapse, Swivel style from side to side by Pivot Leg. Mounts onto rifles with sling stud or with picatinny rail via adapter sold seperately, search B012ZQSWYC, Add Both To Cart, it'll save 8. High quality aluminum alloy in durable black matte finish, Rubber feet avoid slip, top rubber covered avoid scratch your caliber. Easy to use, sturdy construction with lock screw, frame crossbar. Pod Lock replaces the thumbnut on pivoting bipods to make locking them down easier.

Extends from 6 to 9 Swivels Tilts.

EFFORTLESS ONE-HANDED CONTROL Effortless operation with just one handswiftly stow, deploy, adjust cant tension, and extend the legs. A gentle push or flick is all it takes to ready the bipod, emphasizing quick responsiveness.. UNYIELDING GRIP ACROSS TERRAINS Tackle most terrains confidently with rubber feet, soccer cleats and tire tread design. Offering great traction across diverse surfaces, eliminating slip concerns provides a steadfast grip, empowering you with precision and control.. LIGHTWEIGHT STRENGTH EFFICIENCY Lightweight resilience and robustness. Forged from a polymer blend, its legs promise unparalleled durability and rigidity, delivering unwavering stability for hunting and general use.. ERGONOMIC PRECISION IN YOUR GRASP Tailored to nestle perfectly in your grip, it facilitates seamless adjustments and steadfast support. Be it in the tranquil field or the throes of competition, this bipod ensures a snug hold, precision tuning, and steadfast balance.. DIRECT-FIT M-LOK INTEGRATION Engineered for a low-profile, direct-fit connection to any M-LOK compatible chassis or handguard. This system creates a rock-solid, integrated attachment, ensuring an unwavering and stable base for your rifle..

Rugged Aircraft-Grade Construction-Crafted from aircraft-grade aluminum, the Xaegistac 5.7 to 8 Rifle Bipod is engineered to endure the harshest shooting environments. This xaegistac bipod is built to last and provides long-lasting durability.. Versatile Mounting System-The Xaegistac Bipod Mlok boasts a unique mounting system that attaches directly to an M-lock handguard at the 3 and 9 o'clock positions, requiring only two slots. This mount allows for quick and easy attachment and makes the bipod compatible with a wide variety of firearms.. Adjustable for Any Situation- Featuring 5 positions that can be locked into place, the m lok Bipod can be adjusted for different lengths and accommodate various shooting angles. Whether you're stowing it forward or backward, this mlok bipod will keep your firearm steady and accurate.. Textured Foot Pads- With textured foot pads on each leg, the Xaegistac Rifle Bipod provides a secure and stable shooting platform on most surface. You can rely on this rifle bipod to keep your firearm steady and prevent it from slipping, regardless of the terrain or shooting conditions.. Wide Applications- Whether you're in the field or at the range, this Mlok bipod is your companion. With stability and precision, you can shoot with the confidence of an experienced pro in any scenario. Plus, with an adjustable centre height from 5.7 to 8.0, you can adjust the support to suit your specific needs..

6-9 Inch Adjustable Bipod 6 level. Full Metal For Heavy Duty. Mounts onto rifles with sling stud or with picatinny rail via adaper. Easy to use, sturdy construction. w Weaver Mount Adaper.

This Bipod is most Useful For Shooting Off The Bench.

Package length 22.352 cm. Package width 8.89 cm. Package height 4.064 cm. Product Type SPORTING GOODS.

Product Type Sporting Goods. Item Package Dimensions 21.844 L X 8.128 W X 4.572 H Cm. Country Of Origin United States. Item Package Weight 0.85 Pounds.

Harris Engineering. Scrimshaw BiPod. S25C.