Kit features four yoke slots allowing unit to be used for two or three-hole applications. 30 Different size bolts included. The floating swivel prevents damage to the shaft ends. Yoke is heat-treated alloy steel for strength and durability. Set includes yoke, pressure screw, and pulling screws in a molded storage case.

Combo 23 jaw gear pull 4. Tool solutions for most all situations. Built to exceed tool standards. Strong and dependable enough to last a lifetime. Kit services many Domestic V8 and V6 engines with harmonic balancers with threaded holes. Tool set for removal and installation of harmonic balancers that have threaded holes. For use on many US made V6 and V8 engines. Includes special puller for removal of the crankshaft pulley on many 1990 and newer Chryslers engines. Storage case includes usage photos. Kit 45 includes 33-Piece for removal and installation of harmonic balancers with threaded holes.

DIY OR PRO HARMONIC BALANCER REMOVER Removing harmonic balancers with a prybar damages components Our pully puller tool easily and safely removes harmonic balancers, vibration dampers, pulleys, and more Includes bolts for GM 3300 and 3800 V6 engines. EASY-TO-USE PULLEY PULLER Features a yoke with 4 slots, which allows for 2 or 3 hole applications The floating swivel prevents damage to shaft ends Our harmonic balancer kit's washers won't pull through the yoke while torquing the pressure screw. VERSATILE HARMONIC BALANCE TOOL Not just a harmonic balancer pulley puller This gear and pulley puller kit's equipped with a pressure screw and bolts that can be used as a steering wheel puller kit and crank pulley puller kit Invest in versatility. RELIABLE HARMONIC PULLER The screw tip keeps the harmonic pulley puller in place while you apply torque The pressure screw will apply even pressure with the screw tip lifting the harmonic balancer or crank shaft pulley away from the vehicle. DURABLE PULLER TOOL The steering wheel remover's yoke is heat-treated for strength and durability Lubricate the pressure screw before using the steering wheel pullers to make the operation easier Not meant to be used with impact drills.

Set includes driving screw, thrust bearing, and 13 threaded adapters necessary to work on a wide range of domestic and some import harmonic balancers. Five long adapters for use on Dodge Hemi, generation III and IV GM motors, some Chrysler and some Ford including 3. 5L and 4. 0L. The 1. 75 spacer allows the tool to work more efficiently on deep harmonic balancers. Fit Type Vehicle Specific.

MANY APPLICATIONS The forcing fasteners in this harmonic balancer puller fit a wide variety of V8 and V6 vehicles M16 x 2.0 mm GM, M14 x 1.5 mm Dodge, Chrysler, and Jeep, M12x 1.75 mm Dodge Chrysler, and Jeep, and M12 x 1.5 mm Ford. SAVE TIME AND MONEY Car repairs can be expensive By using this harmonic balancer installer, you will be saving over 600 You can also save time with this balancer installation tool by not waiting for repairs at the auto shop. CONVENIENT PACKAGE All of the pieces in this harmonic balancer installer kit come in one convenient package, making the pieces both easy to find and easy to store Never worry about losing pieces with this harmonic balancer puller set. EASY TO USE Assemble the threaded rod nut bearing with the bearing facing away from the hex Insert the threaded rod through the balancer and fastener into the crankshaft Hold the hex end with a wrench Use a second wrench to rotate the assembly. EFFECTIVE The three puller arms have a significant bite to grip and remove pressed-on harmonic balancers This harmonic balancer puller kit both reduces the risk of stripping threads inside the crankshaft and the risk of breaking crank bolts.

Designed for removing harmonic balancers in tight engine compartments without having to remove the radiator. Kit contains 3-jaw puller, four lengths of forcing rods, forcing screw with a 38 inch internal square drive for ratchet use and 34 inch external hex for wrench or socket use plus an extra set of jaws to cover even more applications and vehicles. Rugged, high quality materials ensure high strength and a long service life. Compatible with GM 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L, and 8.1L V8s CADILLAC 1988 4.5L, 4.6L, and 4.9L V8s CHEVROLETGMC 2003 4.2L I6, 2004 3.5L I5 2005 2.8L I4 CHRYSLER 1990 2.0L, 2.4L I4s plus 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s. Compatible with FORD 1995 V8 engines with 3 spoke pressed on damper MITSUBISHI 1995-99 Eclipse 2.0L DOHC non-turbo SAAB 2005-09 9-7X with 4.2L, 5.3L, or 6.0L engine VOLKSWAGEN 2009-10 Routan 4.0L.

Ease of Use Harmonic Balancer Installer Kit is made with quality and attention to detail so that you can install a harmonic balancer without causing damage. Harmonic Balancer Installer Tool set includes a jaw screw, a jack screw nut, a pressure bearing, a 38 inch x 24 bolt, and 9 thread adapters. Mechanic Tools OEMTOOLS harmonic balancer installer includes two sets of color coded adjustable sleeves for each expanding driver. Versatile 9 count thread adapter kit fits most vehicles Kit includes adapter sizes 12 mm x 1.5, 14 mm x 1.5, 16 mm x 2.0, 716 inch x 20, 12 inch x 20, 916 inch x 18, 58 inch x 18, 34 inch x 16. Quality Choice Automotive Tool The harmonic balancer installer tool kit fits many makes and models and is a smart addition to your shop tools and mechanic tools.

The kit Includes a standard Harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a Harmonic damper pulley puller for Chrysler, GM, Mitsubishi, and Dodge. Includes new interchangeable puller jaws for 3.6L V6 Chevrolet Camaro and Dodge 5.7L Hemi. Plastic case Available separately.

Fit for Small And Big Block Chevy Cranks. Made of high quality steel,1 year warranty. Professional Installation Recommended.

FOR PRESSED-ON HARMONIC BALANCERS Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers. WIDE APPLICATION Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac 1988 - Newer, Chevrolet Trucks 2003 - Newer, Chrysler 1990, Ford 1995 - Newer, and Mitsubishi Eclipse 1995. EASY TO USE Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process. INSTRUCTIONS AND STORAGE CASE INCLUDED Our harmonic balancer pulley removal tool comes with easy-to-follow instructions and a durable blow-molded carrying case Easily take this harmonic balancer puller set from job to job. PRODUCT SPECIFICATIONS Includes Puller Body, 3-Jaw Puller, 3 Jaw Retaining Pins, 3 Wave Washers, 4 Pressure Screw Adapter Rods 4, 5-1332, 6-12, and 7-1332 Blow-Molded Carrying Case.

4Pc axle nut socket set K. Tool solutions for most all situations. Built to exceed tool standards. Strong and dependable enough to last a lifetime. Kit services many automobiles and light trucks. Tool set for removal and installation of harmonic balancers that have threaded holes. Removal pieces combo yoke, national fine center screw, center point piece and bolt pairs. Installation pieces national fine center screw, thrust bearing, forcing nut and jaw nut. Adapters included M12-1.5, M14-1.5, M16-2.0, 716-Inch-20, 12-Inch-20, 916-Inch-18 and 3416. Kit 12 includes 22-Piece for removal and installation of harmonic balancers with threaded holes.

This Harmonic Balancer Puller Set provides you with everything you need to remove damper pulleys in tight engine compartments without removing the radiator.. Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Clevis pins allow jaws to be quickly removed and installed.. APPLICATIONS This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.. Manufacture by high quality 45 steel provides extra strength and longevity with a black oxide finish for corrosion resistance.. Includes 1 x 3-jaw puller, 4 x Forcing rods, 1 x forcing screws, 1 x storage case. Dimension 38 drive forcing screw-90 mm 4 x forcing rods-100 mm, 135 mm, 165 mm, 185 mm..

APPLICATIONS Compatible with SBC small block and big block Chevy crankshafts, this tool offers versatility and convenience for various applications.. QUALITY Made from high quality steel material.Backed by a limited 90 day factory warranty.. SPECIFICATIONS 58 in.-16 and 716 in.-16 threaded ends.. EASY TO STALL This Harmonic Balancer Installer Tool makes installing the harmonic balancer simple and easy, Just thread the proper end into the crankshaft and rotate the nut pressing the bearing against the harmonic balancer.. INCLUDES Sold as a kit. 1X Threaded Rod, 1X Nut, 1X Washers, 1X Thrust Bearing.

UPGRADED VERSIONOur harmonic damping pulley tool has 6 jaws, 3 thicker jaws to fit older vehicle models and 3 thinner jaws to fit the newest models. Fits most new and old models.. QUICK BALANCER REMOVAL This harmonic balancer puller kit is specifically designed for quick removal of pressed-on balancers with a single center retainer bolt with this engine repair tool there's no need to disassemble the radiator, saving you a huge chunk of time. WIDE APPLICATIONS GM 5.7L V8 GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8 Cadillac 4.5L, 4.6L, and 4.9L V8 Compatible with Chevrolet Trucks 2003- 4.2L I6, 2004- 3.5L I5, 2005- 2.8L I4 Compatible with Ford 1995- V8 engines Mitsubishi Eclipse 1995- 2.0L DOHC non-turbo.. PREMIUM QUALITY MATERIAL Manufacture by high hardness steel provides extra strength and longevity with a black oxide finish for corrosion resistance.. PACKAGE INCLUDES 1 x 3-jaw puller, another 3-jaw can be replaced4 x forcing rods, 1 x storage case. Dimension 38 drive forcing screw-90 mm 4 x forcing rods-100 mm, 135 mm, 165 mm, 185 mm..

DIY OR PRO HARMONIC BALANCER REMOVER Removing harmonic balancers with a prybar damages components Our pully puller tool easily and safely removes harmonic balancers, vibration dampers, pulleys, and more Includes bolts for GM 3300 and 3800 V6 engines. EASY-TO-USE PULLEY PULLER Features a yoke with 4 slots, which allows for 2 or 3 hole applications The floating swivel prevents damage to shaft ends Our harmonic balancer kit's washers won't pull through the yoke while torquing the pressure screw. VERSATILE HARMONIC BALANCE TOOL Not just a harmonic balancer pulley puller This gear and pulley puller kit's equipped with a pressure screw and bolts that can be used as a steering wheel puller kit and crank pulley puller kit Invest in versatility. RELIABLE HARMONIC PULLER The screw tip keeps the harmonic pulley puller in place while you apply torque The pressure screw will apply even pressure with the screw tip lifting the harmonic balancer or crank shaft pulley away from the vehicle. DURABLE PULLER TOOL The steering wheel remover's yoke is heat-treated for strength and durability Lubricate the pressure screw before using the steering wheel pullers to make the operation easier Not meant to be used with impact drills. Used to remove many harmonic balancers, vibration dampers, pulleys, or gears. Includes bolts for GM 3300 3800 V6 Engines. Comes in a sturdy blow-mold storage case.

INCLUDES This LS Harmonic Balancer Install Kit includes a threaded installer for installing harmonic balancers on select GM engine applications. This kit includes a heavy duty thrust bearing washer and one M16 x 2.0 threaded installer rod.. DESIGN This harmonic balancer install kits contents feature solid steel construction with a black phosphate finish for enhanced strength and durability. The included heavy duty thrust bearing washer makes harmonic balancer installation simple, allowing for harmonic balancer installation on several GM engines.. APPLICATION This kit services harmonic balancers, underdrive pulleys, and recessed crank threads on GM Gen IIIGen IV LS-based and GM Gen V LT-based V8 engine systems. This set includes one metric threaded adapters in M16 x 2.0 thread. NOTE This kit is for harmonic balancer installation only and will NOT remove harmonic balancers.. RELIABLE EFFECTIVE EFFICIENT Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance. If you have any issues with your ARES LS Harmonic Balancer Install Kit, simply contact customer service for troubleshooting help, parts, replacement, or refund.. ASPCA BUSINESS AMBASSADOR We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, were proud to help this great organization..

Profesional Replace Balancer Kit This kit made you to removal and install balancer a breeze, very easy to use and a must-have tool if you're changing out a harmonic balancer. Made the job very quick and easy with no damage to any engine parts,the thrust bearing design on this model is nice, removal and installation of the balancer required minimal effort, went onoff evenly and smoothly. Wide Application Comes with a number of metric and standard bolts so it should work for most applications. Flywheel Remover, Crankshaft Pulley Removal, Steering Wheel Pulling Set to remove worn or damaged harmonic balancers on any vehicle. Specifications M16 x 2.0, M14 x 1.5, M12 x 1.5, 34-16, 58-18, 916-18, 12-20, 716-20 Black screws M10 x 1.5 x 35mm, M8 x 1.25 x 45mm, M8 x 1.25 x 65mm, M8 x 1.25 x 90mm Silver screws UNC 38 x 2, UNC 516 x 6, UNC 516 x 3-12, UNF 516 x 3, UNF 38 x 1-12, UNF 14 x 2-12, UNC 38 x 3, UNC 38 x 4-12, UNC 38 x 2, please carefully check your car's specifications. Tips This kit not fit all the vehicle, not have M12 x 1.75 bolt , Not for LT1 Gen 2 engines, not fit 4.0L Chrysler engine early 2000's Pacifica, 2008-2010 Chrysler TC Limited or Dodge Grand Caravan. Sturdy Harmonic balancer puller made of high quality heavy duty steel, has extremely strength and hardness, the surface has been coated with an anti-oxidation coating to prevent rust, so have long service life, and we offer 12 months warranty, we will refund or replace , if the tool have any quality problem.

Everything You Need in One Box This 5 piece long reach harmonic balancer installer kit from Orion Motor Tech comes with 4 long reach adapters and a nutbearing assembly for easy damper installation. For Most Popular Makes Models Our adapters feature M16x2.0, M12x1.75, M14x1.5, M12x1.5 threads.. Damper Installation Made Easy Make damper installation a breeze with our harmonic damper installer kit simply thread the nutbearing assembly onto the adapter, insert it into the crankshaft, and rotate until the damper is fully seated. Meticulously Crafted for Seamless Operation Our harmonic balancer installation tools are precisely forged and molded to ensure smooth and damage-free operation. Engineered for Lasting Service These crank pulley installers are blackened and constructed from solid steel for superior strength, corrosion resistance, and durability to withstand heavy daily use.