Remote Control ModuleThe FC-100A digital display version has a new remote control module. It can be placed under the table and controlled by remote control. No more bending down to operate, more convenient to use.. 99.97 Purification Rate The FumeClear FC100A fume extractor is ideal for small bench soldering. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 0.3 microns. The purification efficiency far exceeds that of small fume smoker absorbers. Keep your eyes and lungs free from pollution. Note The FC100A is not suitable for the fume extraction needs of large laser engravers. Please select the FC-2002, FC-2003 and FC-2004 fume extractor models if required. Multiple Filtration Systems 3 layers The FumeClear unique 3-layer filter design that can effectively filter out 99.97 of harmful gases and tiny impurities. And FC100A is also equipped with 10 Pcs pre-filters specifically designed to absorb large particles of dust. NOTE FC-100A Hepa Carbon Filter newly upgraded to combine 2 into 1. With stronger sealing and longer service life.. Professional Grade High Iodine Filters FC100A main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life. It is expected to last for 3000 hours and does not need to be replaced until then. Great value for money. Great Suction Power FC100A fume extractor has a much higher suction power than similar products, up to 200 mh. It can easily absorb all fine objects near the hood head, including exhaust gas, powder, iron filings, etc.

99.97 Purification Rate The FumeClear FC100A fume extractor is ideal for small bench soldering. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 0.3 microns. The purification efficiency far exceeds that of small fume smoker absorbers. Keep your eyes and lungs free from pollution. Note The FC100A is not suitable for the fume extraction needs of large laser engravers. Please select the FC-2002, FC-2003 and FC-2004 fume extractor models if required. Multiple Filtration Systems 3 layers The FumeClear unique 3-layer filter design that can effectively filter out 99.97 of harmful gases and tiny impurities. And FC100A fume extractor is also equipped with 10 Pcs pre-filters specifically designed to absorb large particles of dust. NOTE FC-100A Hepa Carbon Filter newly upgraded to combine 2 into 1. With stronger sealing and longer service life.. Professional Grade High Iodine Filters FC100A fume extractor main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life. It is expected to last for 3000 hours and does not need to be replaced until then. Great value for money. Great Suction Power FC100A fume extractor has a much higher suction power than similar products, up to 200 mh. It can easily absorb all fine objects near the hood head, including exhaust gas, powder, iron filings, etc. No After-Sales Worries All of FumeClear fume extractor are CE and FCC certified. Our FumeClear engineers are available 247 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems. If our products do not meet your usage requirements please contact us immediately, FumeClear will provide you with the perfect solution..

Solder fume extractorsmoke trapsmoke eliminatorsmoke filtersolder sucker prevention absorber DIY work exhaust fan, suitable for soldering workbench, hand engraving, jewelry welding scene use.. H13 HEPA activated carbon cotton double filter, effectively adsorbs and captures 0.3 micron pollutants such as solder, flux, chemical odor, etc. generated by welding.. PORTABLE SETUP Compact and lightweight construction allows for easy positioning and movement around your work area. The uniquely designed stepless speed regulation function is suitable for various usage scenarios with different air volume requirements. The required wind speed can be adjusted at will while avoiding interference from loud noise.. An extra set of filters is delivered with the product, so you can get 2 sets of filters. The filters are easy to replace, easy to buy, and have a longer service life.. Uniquely configured brushless DC motor, more energy-saving and low noise..

Powerful Suction with 0-100 Stepless Speed ControlBuilt with a high-performance motor, this soldering fume extractor delivers strong, consistent suction to capture solder fumes, resin smoke, nail dust, and chemical vapors right at the source. The upgraded stepless speed adjustment with real-time digital display lets you customize airflow from whisper-quiet low-speed mode to full-power extraction, perfect for precision soldering, DIY,nail salon use, and jewelry making.. Upgraded 2-in-1 HEPA Activated Carbon FilterUnlike generic fume extractors, our desktop smoke purifier features a premium composite filter with more activated carbon filling, paired with a true HEPA layer. This dual-stage filtration system effectively removes fine dust, solder smoke, VOCs, flux odors, and stubborn chemical smells, providing cleaner, healthier air for your workspace and extending filter service life.. Smart 400-Hour Filter Replacement ReminderEliminate guesswork with our built-in intelligent runtime monitor This solder smoke absorber tracks usage hours automatically and alerts you via buzzer and flashing screen after 400 hours of continuous operation, ensuring you never breathe compromised air. After replacing the filter, simply hold the speed rotary knob for 10 seconds to reset the counter for hassle-free maintenance.. Flexible Gooseneck Nozzle for Precision Fume CaptureEquipped with an adjustable, bendable gooseneck hose, this fume extractor lets you position the suction nozzle directly at the fume sourcewhether its your soldering iron, 3D printer nozzle, nail drill, or jewelry torch. This targeted design maximizes extraction efficiency, preventing harmful vapors from spreading across your workbench.. Compact Desktop Design for Multi-Scenario UseWith its space-saving, tabletop-friendly form factor, this portable smoke absorber is ideal for home workshops, electronics repair stations, nail salons, craft studios, and small business workspaces. Its not just for solderingperfect for DIY,CNC machining, stained glass painting, metalworking, and resin art projects.. Exclusive Air Outlet Deflector Low-Noise OperationOur unique top-mounted air outlet deflector design eliminates messy bottom exhaust interference, keeping your workspace tidy and airflow consistent. Even at maximum speed, the unit operates quietly without distracting you from detailed work, making it suitable for shared spaces and quiet home environments.. Complete Filter Kit Included for Immediate UseEvery smoke extractor comes with a pre-installed HEPAcarbon composite filter plus 5 extra pre-filter cotton pads, so you can start purifying air right out of the box. The easy-access filter compartment allows quick, tool-free filter replacement, ensuring your smoke purifier stays performing at its best for years..

Great for workspaces using more active fluxes. Removes flux fumes from soldering workbench. Fumes are absorbed by the replaceable carbon-activated filter. Includes one replacement filter WSA350F, ESD safe. Fan is quiet and will not add significant noise to the workspace.

Rapid Smoke AbsorptionThe BD-60 smoke exhauster uses a DC brushless motor. Its powerful suction can quickly capture welding smoke particles and intercept and absorb them with the filter, preventing them from being directly inhaled into the lungs and providing you with a safe and healthy working environment. Multiple Filter DesignIt adopts a 4-stage filtration system to intercept and adsorb pollutants one by one. It is equipped with filter bag pre-filter HEPA activated carbon filter, which can efficiently capture 99.97 of harmful metals and chemical pollutants tin, lead, solder paste and other pollutants. The diameter is as small as 0.3 microns. The multiple design can extend the service life of the filter.. Stepless Speed Control DesignAdopting a DC brushless motor, it is suitable for a wide voltage range of 110-240V. One-button start and random speed adjustment can meet the needs of different scenarios for different wind speeds and noise levels.. Protable FlexibleThe design is compact and lightweight, featuring a metal casing and a 360-degree infinitely adjustable and stretchable smoke extraction pipe. It can be moved freely to adapt to different working angles. The large hood covers a wide area, reducing smoke diffusion and improving overall performance.. Fully EquippedIncludes replacement filters for longer service life. 2HEPAActivated Carbon Filter, 5Pre-Filter, 50Filter Bag, 1Fume Extractor, 1Smoke Pipe, 1Exhaust Hood, 1Power Supply, 1User Manual Compatible filters are also available for sale, ensuring worry-free filter replacement for users.. Note The BD-60 is a basic fume extractor designed for welding enthusiasts. It may not be suitable for large-scale laser engraving applications or other scenarios requiring high suction power..

Professional Strong-Suction Fume ExtractorThis fume extractor effectively absorbs smoke and odors from electronic soldering, 3D printing, and nail services. For laser marking or heavy smokeodor applications, we recommend Model 309 or replacing 1-2 sets of filters weekly to maintain optimal performance as a soldering fume extractor.. Powerful Reliable Solder Fume ExtractorEquipped with a durable metal shell and a low-noise 15,000 RPM motor, this solder fume extractor delivers 168 mh airflow with under 60 dB noise. It effectively absorbs harmful gases within 5 inches. The universal 100240V power adapter offers surge and voltage spike protection for stable operation.. Triple-Layer H13 FiltrationThis soldering fume extractor uses a three-stage filtration systemHigh-Density Fiber, Carbon Cotton, H13 HEPA, and Activated Carbonto remove 99.99 of dust, mold, bacteria, chlorine, heavy metals, and harmful gases. It ensures clean air and serves as a reliable smoke absorber.. Compact Adjustable DesignFeaturing a metal body and a 5-foot power cord, this smoke absorber saves space. Its 360 adjustable hose 725 inches offers flexible placement, making the fume extractor suitable for various workspace layouts.. Quality Assurance Exceptional SupportEach soldering fume extractor is 100 quality-inspected. Backed by a 3-year warranty, we are committed to providing professional-grade fume extractors and dependable customer support..

Professional Smoke Capture Purification The upgraded solder fume extractor can effectively captures and eliminates harmful welding, soldering, and engraving fumes. The fume extractor can remove 99.97 of dust and odors, making the air in the workshop healthier. Dual-Layer HEPA Carbon Filtration Our smoke air purifier features a 4-stage system. Dual HEPA and activated carbon filters can capture 99.99 of harmful particles. As a reliable smoke absorber, it can capture harmful gases and unpleasant odors, providing you with ultimate protection. Designed specifically for precision PCB work ideal 2-3 inch working distance, this 7W low-power soldering fume extractor provides targeted suction to capture fumes right at the source. This fume extractor is optimized for small work areas, not large ventilation.. Versatile Use The solder fume extractor has a durable metal casing that can withstand impact. It is suitable for precise work such as welding stations, jewelry making, and engraving. The smoke eater can adsorb harmful fumes generated from soldering or wood burning, effectively cleansing the air in your workplace. Easy To Replace Filter And Use The soldering fume extractor does not require any tools, and the pull ring filter design enables quick replacement. The universal 110V-240V adapter ensures safe use worldwide. The efficient smoke absorption are durable and reliable for any welding workspace.

Efficient Smoke Absorption-The solder fume extractor quickly and effectively removes smoke, dust, and odors from your workspace. Whether you're soldering or welding, this device ensures a clean and healthy environment. This Solder Smoke Absorber comes with 2 filters for you change. Wider Smoking Range Our soldering fume extractor is equipped with two detachable magnetic wings, which can expand the coverage area for smoke extraction. You no longer need to worry about smoke escaping anymore. Compact and Portable Design-With its lightweight and compact build, the fume extractor is easy to move and store. Perfect for small workspaces, labs, or home use, it fits seamlessly into any workspace without taking up much room. Low Noise Designed with a low-noise motor, the solder smoke absorber operates with minimal noise, ensuring a quiet working environment during use. Easy to Clean and Maintain-The detachable filter system makes cleaning and maintenance a breeze. Simply remove the carbon filter, clean or replace it, and your fume extractor soldering is ready to go again. Durable and long-lasting, its a reliable tool for any solder workspace.

COMPACT DESKTOP DESIGN SPACE-SAVINGLooking for a Solder Fume Extractor that won't take up your entire workbench Measuring only 5.1 x 5.1 x 6.3 and weighing just 3 lbs 1.4kg, this Soldering Fan is born for hobbyists with limited space. Whether you are soldering in a tiny apartment, a crowded home office, or a basement crafting corner, it sits perfectly on your desk without getting in the way. Easy to move, easy to storeyour ultimate space-friendly health guardian. 99.99 EFFICIENT with 168mh SUCTION POWERDon't let the small size fool you. Powered by a high-speed centrifugal motor, this Fume Extractor Soldering delivers a highly effective 168mh airflow. It provides just the right amount of suction to instantly capture harmful fumes and smoke before they reach your face, without cooling down your soldering iron tip. Perfect for amateur soldering, PCB repair, and everyday DIY projects where massive industrial power isn't necessary. PRO-GRADE H13 HEPA FILTRATIONThis Soldering Fume Extractor is driven by premium H13 HEPA. It effectively traps 99.99 of microscopic fine dust and dense rosin smoke, while its evenly distributed carbon powder noticeably reduces light odors to keep your workspace fresh. Additionally, the system includes a high-density, 10mm thick pre-filter. It instantly blocks large particles and flux splatters, preventing premature clogs and ensuring your main filter maintains peak performance for longer. FLEXIBLE HOSE CUSTOMIZABLE NOISE CONTROLExperience complete control over your workspace with Soldering Fan Fume Extractor. The shape-retaining flexible hose can extend up to a maximum of 25.6 inches 0.65m and can be freely 360 bent. This allows you to precisely position the suction head exactly where the smoke is generated. Plus, the stepless rotary knob lets you easily adjust the fan speeddial it up for heavy smoke, or turn it down to minimize noise when you need a quiet environment. YOUR PROFESSIONAL DESKTOP SAFETY GUARDIANBeyond electronics repair, it serves as a versatile, everyday ventilation tool for stained glass making, woodburning pyrography, 3D resin printing, and jewelry crafting. Offering robust health protection, it is an ideal gift for DIY enthusiasts and makers. Furthermore, its compact design makes it perfectly suited for bulk procurement by schools and training institutions to protect students during manual soldering classes. Every NEETOP product is built for long-term use and backed by reliable warranty support for warranty activation details, please contact our customer support team. Our professional technical team is always on standby to provide one-on-one assistance whenever you need help with installation, filter replacement, or product setup. If you ever have a question, simply reach out to uswell make sure you get the support you need and a worry-free experience from day one.

Compatibility The PP2301 Filter is specifically designed Compatible with WECREAT PP2301. Efficient Filtration SystemThe combination of pre-filter and high-efficiency filter can filter out particles and smoke in the air, creating a cleaner and healthier environment for you. Economy sets Exchange for a longer - lasting using experience at a lower cost, better improve the air quality of the working space and protect the internal components from damage. Easy to install Specifically designed for the PP2301 model, it is very easy to install, and can be replaced more quickly to restore the high-efficiency filtering and smoke exhaust function. After-sales service We have always been committed to providing all customers with high-quality and cost-effective air purifier filters to help you build a better living environment.

INDUSTRIAL FUME EXTRACTOR The powerful 80W DC motor on OMTech's industrial-strength XF-180 fume extractor creates a powerful 106 cu. ft.min. airflow to pull in exhaust and purify air during any project from laser engraving to welding, soldering to machining the provided 2.6 to 4 adapter lets this fume extractor connect to 40W OMTech cutting and engraving machines. 3-STAGE FILTER Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, its central HEPA filter, and its inner activated charcoal filter to absorb all your work's harmful gases and unpleasant odors. HIGHLY MOBILE The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it. INTUITIVE CONTROL At a press of the button, you can easily adjust this purifier's air flow among three modes to match your needs. SATISFACTION GUARANTEED OMTech backs this fume extractor with our usual strong warranty and friendly 247 customer service, ensuring that you'll enjoy its use for years to come.

Powerful Suction with 3 Adjustable Speeds Equipped with a high-speed 10000RPM brushless motor and three fan speed settings, this solder fume extractor quickly removes harmful smoke for a cleaner, safer workspace. Effective Filtration System Uses replaceable high-density activated carbon filters to absorb toxic fumes and fine particles, protecting your respiratory health during soldering. Portable Type-C Rechargeable Design Compact, cordless, and easy to carry, this fume extractor supports DC 5V Type-C charging for maximum convenience in mobile soldering setups. Charge fully in about 2.5 hours using a Type-C adapter indicator shows red while charging and turns off when complete.. Compact Space-Saving Design Built with a mini form factor to fit comfortably on any workbench without clutter. Ideal for tight spaces, home labs, or portable setups where space is limited. Built-in LED Ring Curing Light An adjustable LED ring around the air inlet ensures clear visibility, while the air outlet features a curing light for improved soldering efficiency and precision.

WIDE COMPATIBILITY Hepa Filter suitable for most solder fume extractor on the market, please note the dimensions 13.666.812.16in.. HIGH-EFFICIENCY FILTRATION Our Hepa Filter are designed with advanced filtration technology, capturing up to 99.97 of particles as small as 0.3 microns. Promoting cleaner and healthier air.. LONG FILTER LIFESPAN Our Hepa Filter honeycomb structurefor larger absorption area, resulting in a longer lifespan compared to standard filters. This not only reduces the frequency of replacements but also offers cost savings in the long run.. REPLACEMENT TIME Layer 2 filter system - Pm0.5 Filter, replacement cycle 36 Months. When the accumulated dust on the Hepa Filter exceeds 70 and cannot be cleaned anymore, please replace the Hepa Filter.. OUR SERVICE We value our products and customer experience. If you're not satisfied with our Hepa Filter, please feel free to contact us here, we will offer you premium customer service.

Perfectly CompatibleThe 3-Stage filtration replacement kit for xTool Smoke Purifier uses OEM production standards and is perfectly compatible with xTool S1M1M1 UltraF1UltraP2D1 smoke purifier Not for F1.. Higher Quality The S1M1M1 UltraF1 UltraP2D1 3-Stage Smoke Purifier Replacement Kit includes 2 pre-filters, 1 medium filter and 1 main filter.The main filter is made of high quality activated carbon with honeycomb structure design, the mid-filter is made of real H13 HEPA material, in addition, it is equipped with two pre-filters to filter out large particles such as visible smoke and dust, which extends the life of the kit for up to 6-12 months.. Efficiency Filtering The S1 air filter kit compatible with xTool 's 2 pre-filter can , - . ., to provide you with fresher air. Simple InstallationOur F1 Ultra air filter replacement for xTool features a 3-layer filtration system designed specifically for the xTool Smoke Purifier S1M1M1 UltraF1 UltraP2D1, which continuously draws in smoke and debris from your laser engraver with a purification rate of up to 99.97, and can be replaced in just a few minutes with no tools required to enjoy fresh air. For optimal filtration, replace the filter cartridge every 12 years, depending on usage.. Sincere ServiceWe insist on using high-quality raw materials to make each S1M1M1 UltraF1 UltraP2D1 3-Stage Filter Replacement Kit Compatible with xTool . Besides, , - , ? .

Essential Information - YIHUA 948DQ-I comes with 8 filtration adsorbers, 2 fenders and 1 tiltable stand for the Solder fume extractor and a pair of detachable helping hands. This product can adsorb harmful fumes generated from soldering, effectively cleansing the air in your workplace, ensuring safety and working efficiency.. Dual-filtering Function - High-quality filtration adsorbers at the front and rear help effectively filter the harmful particles and reduce odors from the fumes.. Tiltable Stand Fenders - This fume extractor comes with a 30-tiltable stand, allowing you to adjust the effective filtering areas according to needs. In addition, fenders on both sides can help reduce disruptive airflows and ensure effective fume extraction. Fumes generated within the straight-line distance of 10 cm can be adsorbed effectively.. Detachable Helping Hands - This product comes with a pair of detachable helping hands Length 30cm10, which can fixate objects such as PCD or wires while soldering. This allows users to solder more flexibly.. Choose YIHUA with Confidence Enjoy our 12-month US- exclusive manufacturer technical coverage and 247 professional assistance on Amazon. Note This model is designed to operate on 110-127V with a US-standard power plug..

Cleaner Air, Easier Soldering Compact yet powerful, this solder fume extractor features a 40 W brushless motor that efficiently captures solder smoke and particles at the source, helping create a cleaner, more comfortable soldering environment. Double-Layer Filtration Primary quartz cotton and HEPA filter work together to capture most solder fumes and dust, effectively filtering out harmful gases and tiny impurities for cleaner air Filter comes pre-installed replacement filters can be purchased as needed. Adjustable Suction, Easy Control VEVOR solder smoke absorber features a 080 mh adjustable airflow to match different soldering tasks and smoke levels. From ON to MAX, simply turn the knob to adjust airflow for more efficient operation. 360 Flexible Fume Hose The 1.8ft exhaust pipe can rotate 360 for flexible adjustment of angles and directions to suit different work positions. Paired with the large exhaust hood to capture and direct fumes away more precisely and efficiently. Compact Sturdy Our fume absorber extractor features a metal body with a precise interior to prevent smoke leakage and ensure durability. Four anti-slip rubber feet keep it stable on your desktop, and the compact design makes it easy to carry or store.

Efficient Dual-Side Filtration System This solder fume extractor features an innovative dual-side filtration design. Unlike single-filter models, this smoke absorber creates a wider capture zone, significantly enhancing the efficiency of fume extraction and providing superior protection against harmful soldering smoke. Powerful Motor with Effective Suction Equipped with a robust motor, this fume extractor delivers strong suction with speeds of 2400-2700 RPM. The solder fan effectively captures smoke at the source within a 5-6 inch range, preventing it from spreading and a comfortable environment is provided. All-in-One Soldering Station with Light Hands This 3-in-1 smoke absorber integrates a bright LED light and two flexible helping hands. The light illuminates your work area in low-light conditions, while the alligator clips securely hold components, making this Solder Fume Extractor a complete solution for soldering tasks. Fully Adjustable for Optimal Positioning This fume extractor is designed for maximum flexibility. It features an adjustable-angle bracket for optimal positioning of the suction head, and the articulated helping hands can be moved and locked into place, ensuring the Solder Fan and clips are exactly where you need them. Ready-to-Use for Various Applications As a dedicated solder fume extractor, this unit operates on standard 110V AC power for immediate plug-and-play use. Its comprehensive design makes this smoke absorber an essential and versatile tool, perfectly suited for a wide range of soldering and DIY projects.

High-Efficient Absorb Optimized 2800 RPM high suction fan is low noise, Strong absorption, effectively absorb the toxic fumes, air purification.. Upgraded Design Pure copper motor.The enclosure is made from metal.4 non-slip heavy-duty rubber feet anchor the unit to the ground. A handy carrying handle allows you to move the unit easily.. Easy to replace the filter Includes two replacement filter.. ESD-Safe Design The solder smoke absorber is made of ESD-safe materials.. 100 Satisfaction Service Export products 100 quality inspection, all customers support 3 months of unconditional exchange or return policy and promise to provide a 3-year after-sales service..

Fume Extractor Filter Replacement Compatible with 100W FES150S Desktop Welding Smoke Absorber Remover Purifier,1pack carbon filter6pack Pre-filter. A BRAND YOU CAN TRUST Strict production process, from the selection of raw materials to the professional operation of production, ensures the quality of the filters and provides health protection for you and your family We deserve your trust with the high- quality products and the most affordable purchase price. 3-STAGE FILTRATION SYSTEM?High-Efficiency Activated Carbon Filter absorbs cooking smells,smoke,and pet odors. H13 Filter absorbs pet dander, dust, smoke, pollen, and other particles. Fine Preliminary Filter obstructs large particles such as dust, hair, lint, fibers and pet fur to help the air purifier work more efficiently.. Please replace regularly to keep your machine fresh and clean,For best results, the filter once a month and clean with a soft brush or gently vacuum.. Easy replacementTop-Notch Quality Used for Maximum Customer Satisfaction Guaranteed, Change the Slirceods replacement filter in minutes, no tools required note please remove the new filter from the plastic bag before placing it into it..

Efficient Filtration this filter refills accessories combo includes 3 pre-filter cotton replacements with1 medium filter replacement that effectively catches PM50 particles or larger debris This ensures prolonged efficiency of your soldering fume extractor by enhancing overall air purification. Convenience Size our replacement filter features an optimal size of 14.4 x 6.9 inches36.5 x 17.5 cm, ensuring it fits seamlessly with most soldering smoke absorbers This universal compatibility makes it a must-have among air purifier accessories for a cleaner work environment. Air Quality Improvement our medium efficiency filter replacement captures 99.97 of particles as small as 0.3m This precision filtration improves the air quality in your workspace, making it a nice addition to any soldering fume extractor setup. Hassle Free Installation designed for ease of use, our replacement filter is straightforward and quick to install This convenience means less downtime and more productivity And the package supports extending the filtration cycle between 7-30 days, reducing the frequency of buying replacements. Comprehensive Coverage beyond just welding fumes, these filter refills accessories are nice for various applications, including laser smoke, beauty salons, printing, and more They ensure your working environment remains clean and safe, highlighting their versatility as essential air purifier accessories.

Replacement H13 FIlter Compatible with Creality FumeClear FC2001A Solder Fume Extractor. Performance is the same as the original. This product works with these device ASINs B0D7ZRX985. H13 True Hepa Filters Moving air through dual True HEPA filters, that 99.97 of particulates larger than 0.3 microns, makes your air fresher Make you have a beautiful environment. H13 filter 3 In 1 Grade HEPA Filter 99.7 of airborne particles down to 0.3 microns in size,High-Efficiency Activated Carbon, filter All sorts of smoke, hair, And other substances.. Please replace regularly to keep your machine fresh, Replace every 4-6 months depending on the usage and environment.. Easy to replace, can be installed without the use of any tools, if any problems with the process, please contact us..

Optimal Size for Versatility and Convenience our pre-filter has a size of 36.5 x 17.5 cm14.4 x 6.9 inches, and features a thickness of 8 MM It's nicely compatible with most soldering fume extractors on the market today These dimensions provide ample space to collect heavy smoke and dust, maximizing its efficiency and ensuring a safer, cleaner work environment. Effortless Installation for Optimal Functionality the installation process is as simplified as possible thanks to our specially designed pre-filter system All you need to do is to install the cotton pre-filter onto the fume extractor's and activated carbon filters, then secure the device back to its original place There's no need for measurements or cuts, allowing quick and easy setup and operation. Designed to Extend Filter Lifespan and Efficiency our pre filters cotton are the first line of defense in your fume extraction system Capable of filtering PM50 smoke and larger airborne particles such as sawdust, hair, iron fillings, paper, they effectively extend the primary filter's lifespan by capturing these particles before they reach the main filter With a replacement cycle of 7-30 days, the filtration efficiency and the lifespan of your main filter are greatly prolonged. Wide Application Scope our pre-filter cotton replacements are not limited to soldering smoke removal It's also effective in dust removal, laser smoke purification, DTF harmful gas removal, beauty salons, printing, and welding It's designed to keep your workspace clean and safe and improve the air quality of your workplace. Ample Supply for Continual Use with each purchase, you will receive 10 pre-filter replacement pieces This generous quantity ensures optimal filter performance and provides a sufficient supply for prolonged use Enjoy a cleaner, healthier workspace without frequent shopping trips for replacements.

Kulannder extractor filter replacement activated fits for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX and Aoyue 486.br. How often should replace your carbon filter Normally activated charcoal filters should last 4-5 months should replace a new filter. br. This smoke fume absorber filter can take the smoke away very well, thick well made filter, works well for your fume extractor, homemade DIY fan.etc.br. Enough quantity and size totally 6pcs carbon extractor filter, each carbon filter dimensions are 130mm130mm10mm5 18 5 18 38br. Extractor filter only, not include smoke absorberbr Guarantee and Warranty any quality issues, just contact us for refund or replacement.br.

Solder Fan Fume Extractor Filter Activated carbon filter smoke for kotto solder smoke absorber and kotto fume extractor filter, works as soldering fume filter and smoke extractor filter. Compatible with ToolBud solder fume extractor, fits for reliable replacement portable fume extractor DIY 4.7 fan etc. Please note only filter included no absorber. Activated Carbon Filter Smoke Replacement kotto fume extractor filte it provides powerful smoke filtration, made of high-density activated carbon filter smoke material. Solder fan fume extractor filter efficiently absorbs toxic flux, lead fumes odors. Acts as kotto solder smoke remover, soldering air filter smoke filter solder to keep workspace clean and safe.. Value Pack 12-pack premium replacement soldering air filter provide long-term supply for KOTTO smoke absorber solder smoke absorber. Cost-effective, save time and money, for daily soldering fume filter, smoke fume absorber work.. Easy to Use This KOTTO smoke absorber filter is designed for hassle-free installation and effortless daily use. No tools or complicated setup requiredsimply remove your old filter and replace it with this activated carbon filter in seconds. Perfectly compatible with kotto fume extractor, kotto solder smoke absorber and most portable fume extractors, it fits snugly without adjustments. Lightweight and compact, ready use. Just install, power on your smoke absorber, and let it efficiently absorb soldering fumes, odors and harmful particles. User-friendly for beginners and professionals, making soldering smoke removal safer and more convenient every time.. Maintenance Smoke Extractor Filter The kotto solder smoke filter durable carbon structure delivers steady adsorption recommended replacement cycle of 34 months ideal for frequent soldering, 3D printing DIY fume extraction to reduce frequent replacements..

- Horizontal or vertical Works efficiently in different environments. As long as you turn on the button, you can stop breathing the evil and smelly soldering fumes.. - ESD protection Surge protection suppress voltage transients and divert excessive current away from sensitive electronic components to protect your electronics.. - Easy to replace the filter Come with 2 filters, made of features urethane foam and activated carbon. Capture and absorbs of fumes and harmful smoke, ensures a breathable environment in your workspace.. - EC motor It can absorb smoke from 4-5 inches away, low noise, high energy saving, small vibration, Long-lasting working time for over 57000 hours.. - Smooth surface Made of high-grade ABS components, which makes it very durable and sturdy. Its small size allows users to keep it close to themselves without occupying too much space..

FEITA extractor filter replacement activated fits for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX and Aoyue 486.. How often should replace your carbon filter Normally activated charcoal filters should last 3-4 months should replace a new filter. Long service life.. FEITA activated carbon filter of smoke filter can absorb toxic flux and lead. Having good adsorption properties.. This smoke fume absorber filter can take the smoke away very well, thick well made filter, works well for your fume extractor, homemade DIY fan.etc. Easy to use.. Extractor filter only, not include smoke absorber Guarantee and Warranty any quality issues, just contact us for refund or replacement..

Solder Smoke AbsorberFume RemoverSmoke Extractor The smoke from soldering is toxic during soldering, is harmful to your health. Our 3in1 soldering smoke absorberfume removersmoke extractor prevention absorber DIY working fanwith Carbon Filter LED Daylightprotect you away from poisonous smoke. Angle flexibility amply meets the various situations, can precisely cover the smoke diffusing area. Low Noise Fan with Smoke Filter ESD safe smoke Extractor fan can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net. Extra 3 easily replaceable filters give you good and timely smoke prevention filter supplements. Recommended filter net replacement every 4 to 5 months depending on usage. Multifunctional LED Lamp At the time of smoke absorbed fan working, its 3 Light Colors 3000K-4500K-6000K and 10 Brightness Levels can help you work in various light conditions. Natural light illumination, soft and without ghost, glare, protect eyes. You can adjust and use according to your needs. Note The overall brightness will be soft as we use eye-friendly LED beads. 2Pcs Flexible Universal Arms The alligator clips of helping hands comes with a rubber protective cap, protect the PCB from short or avoid item damaged because of the sharp clip jaw. You can perform maintenancewelding etc. items with two helping arms, and at the same time to use solder smoke absorber can improve your work efficiency better. Note Alligator clips are mainly used to hold small and light objects such as PCBs, and cannot bear heavier objects.. Adjustable Arms The lamp head can be put 220 degrees up and down, and 360 degrees swivel. 8.85 inches and 8.85 inches extendable long arm and expanded up to 17 inches. And equipped 3 fixed knobs and 2 pair fixed springs help you adjust the lamp position smoothly without swaying left or right, neither sharp falling nor shaking. Kindly Note To ensure the best smoke absorbing, please make the fan and solder joint within 10inches25cm. Please refer to the product video content for the best use distance and use direction..

Advanced 5-Stage Filtration System Equipped with 5-stage HEPA filtration and coconut shell activated carbon, this system eliminates smoke and odors effectively, delivering a clean and refreshing breathing environment.. Custom-Compatible Replacement Cartridges Specifically engineered to fit for Smoke Trap Personal Smoke Air Filter, these replacement air filter cartridges guarantee optimal performance and superior air purification.. Versatile Effortless Usage Designed for easy replacement and convenient daily use, ideal for home, travel, cars, hotels, and officesadaptable to any setting requiring fresh air.. Long-Lasting Durability Value Each cartridge supports up to 500 uses, offering extended durability and a cost-effective solution that minimizes frequent replacement needs.. Dual-Pack Sufficient Supply Includes 6 x air filter replacement cartridges and 6 x moisture filter barriers..

Replacement H13 FIlter Compatible with Fume Extractor. Performance is the same as the original.. H13 True Hepa Filters Moving air through dual True HEPA filters, that 99.97 of particulates larger than 0.3 microns, makes your air fresher Make you have a beautiful environment. H13 filter 3 In 1 Grade HEPA Filter 99.7 of airborne particles down to 0.3 microns in size,High-Efficiency Activated Carbon, filter All sorts of smoke, hair, And other substances.. Please replace regularly to keep your machine fresh, Replace every 4-6 months depending on the usage and environment.. Easy to replace, can be installed without the use of any tools, if any problems with the process, please contact us..

Carbon filter replacement activated fits for Hakko Corporation 493 and FA-400, Xytronic 426DLX and 456DLX and Aoyue 486 etc.. Carbon filter dimensions are 130mmx130mmx10mm5 18 x 5 18 x 38.. How often do you replace carbon filtersIt is recommended to replace the carbon filter every 4-5 months according to the usage situation.. This smoke fume absorber filter can take the smoke away very well, works well for your fume extractor, homemade DIY fan etc.. Include 8 Pcs carbon filter, not include smoke absorber.

The FEITA extractor filter replacement parts have been activated and are applicable to products of Hako Company such as 493 type and FA-400 type, Setnim 426DLX and 456DLX type, as well as Aoyu 486 type.. How often should the carbon filter be replaced Generally, the activated carbon filter can be used for 3 to 4 months, and then a new filter should be replaced. It has a long service life.. The Feita activated carbon filter a filter used for smoke filtration can adsorb toxic substances and lead. It has excellent adsorption performance.. This smoke absorption filter can effectively remove smoke. The filter is of high quality and precision, and is suitable for your range hood, homemade simple fans and other devices. It is easy to use.. Only the filter is included, not the smoke absorber Warranty information If any quality issues occur, please contact us directly and we will handle the refund or replacement for you..

Absorb Harmful Fumes The filter consists of foam and activated carbon, which can absorb toxic fumes from solder, Prevent the smoke from emitting into the room, protect human health.. Low-noise Odourless Soldering fan uses a double roller design, there is low-noise and odourless in the process of use, let you feel immersed in work.. Excellent Suction The optimized fume extrators air flow is up to 110CFM3080Lmin, so it has stronger suction. perfect for soldering project.. Anti-skid Design The upgraded fume extractor has an anti-slip cotton at the bottom, which can be used to prevent slip and reduce vibration noise, giving you a quiet working space.. Easy to Use Unique design for disassembly, activated carbon filter can easy to be replaced at any time. Including one replacement filter..

Efficient Smoke Absorption for Soldering Equipped with a quiet fan and a 0.4-inch thickness filter, this DIY solder fume extractor efficiently captures solder smoke, flux fumes, and odors. It helps improve soldering techniques and hands-on electronics skills while keeping your workspace safe and well-ventilated.. Effective Fume Filtration Bright LED Lighting This DIY soldering kit includes a filter pad and a USB LED light. The filter pad trap fumes and chemical gases, while the LED provides bright, focused lighting during soldering.. Quiet Yet Reliable Performance The low-noise fan delivers strong suction power, allowing you to remove fumes from 35 inches away. Ideal for makers, students, and hobbyists who want a quiet and healthy environment during hands-on soldering practice.. Compact Portable Design Lightweight and easy to move, this solder smoke absorber soldering project kit is perfect for classrooms, labs, and home workbenches. An excellent tool for soldering stations, keeping your workspace clean and safe.. Perfect Gift for Makers Students More than just a solder fume extractor, this DIY kit is a hands-on soldering project. A thoughtful Christmas gift for students, electronics hobbyists, and makersgreat for birthdays, holidays, or any occasion that inspires interest in STEM and electronics..

Shurex 12 Pack Activated Carbon Filter Replacement Refills for KOTTO Solder Smoke Absorber Remover Fume Ventilation Extractor Flux Smoke Prevention Absorber, Compatible with ToolBud Solder Fume Extractor And Your DIY Fume Extractor with 4.74.7 Fan Unit. Eliminate toxic fumes from lead soldering Absorbs and neutralizes smelly odors. This works well for filtering flux smoke. Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter. 12 Pack Each package includes 12 activated carbon filter replacement cartridges, providing a long-lasting and cost-effective solution for your fume extraction needs. Premium Quality Made from high-quality activated carbon, these filters effectively capture and remove harmful fumes, odors, and particles from the air, ensuring a safe and comfortable working environment. Each product is individually sealed and will not be exposed to air to weaken the adsorption capacity.

Upgraded 4-Layer Filtration System filter replacement kit for Walkcleaner smoke purifier ZK001ZK001AZK002. We suggest you replace it every 3-6 months depends on the use time and frequency. Primary filter washable cotton capture visible smoke, hair, dust. The thickness is much thicker than that on other markets, and can be reused after washing and drying, greatly improving the utilization rate and reducing the cost of replacing the filter element. Fine Preliminary FilterBionics principle design multi-layer fiber filter layer, fiber multi-layer mesh superimposed to form dense Structure, this filter layer is equivalent to 20 square meters of ordinary filter material folded effect,The filtration accuracy reaches 0.5 mm level. For hair, large particles of dust, paper scraps, skin The removal rate of debris is more than 99.. True HEPA Filter effectively absorbs and filters harmful particles down to 0.3m with 99.97 purification rate. Main Activated Carbon absorbs and removes harmful gases and unpleasant odors with the high-performance premium activated carbon. Package Includes Primary filter washable cotton1,Fine Preliminary Filter1, True HEPA Filter 1, Main Activated Carbon 1. Fume Extractor for laser engraver, Smoke Absorber Remover,Solder Fume Extractor.

Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.. A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.. Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction 40W, 6000 RPM, 52CFM, Noise Level 55dbm, Life Expectancy 50,000 hours, Static pressure 125mmH2O.. Easy to replace the filter, Includes one replacement filter. Working temperature -2060, Power consumption 120V-240V, 40W 12V, 4A Power supply.. US-based customer support, 30 days full satisfaction no question asked return period..

Value Pack Includes 20 pcs solder extractor filter pads, easy to replace and ideal for long-term use without frequent repurchasing. Wide Fit Solder fume extractor filters compatible with KOTTO and ToolBud units, also suitable as filters for DIY solder smokers and other same-size smoke fume absorber filter devices. Durable Build Made with high-quality activated carbon filter material featuring porous structure and large surface area for consistent performance. Strong Filtration Activated carbon solder fume extractor filters effectively capture smoke, fumes, and particles, improving air quality during soldering work. Cleaner Air Works as a reliable smoke fume absorber filter to reduce odor, smoke spread, and maintain a fresh and comfortable workspace.

Specifically Designed for Laser Engraving Systems 12V Low-Voltage Safe Power Air Purification Solution The ATOMSTACK D3 Air Purifier is purpose-built for laser engraving and cutting machines, compatible with models such as P1, Atelier, and Kraft. It uses a 12V DC low-voltage power supply rated at 3A, ensuring safe and stable operation while delivering professional-grade smoke extraction and air purification for laser processing environments.. High-Efficiency Multi-Layer Filtration System Up to 99.97 Particle Removal Efficiency Featuring a multi-layer composite filter structure pre-filter HEPA activated carbon, etc., it effectively captures PM2.5PM10 particles and absorbs harmful gases such as formaldehyde and TVOCs. With up to 99.97 filtration efficiency, it significantly improves air quality by removing complex pollutants generated during laser cutting.. Powerful Airflow Performance Up to 10 ms Outlet Velocity Equipped with an optimized airflow duct and high-performance motor system, it delivers a maximum outlet airspeed of up to 10 ms. Using a standard 80 mm exhaust port, it quickly removes smoke and particulates, significantly improving local air circulation and reducing pollutant residence time.. Industrial-Grade Environmental Adaptability Stable Operation from -20C to 40C The system supports a wide operating temperature range -20C to 40C, making it suitable for workshops, garages, basements, and other working environments. It also supports 60 RH operating and storage conditions, ensuring long-term stability and reliability.. Modular Filter Design Quick Replacement Long Service Life The modular filter design allows for easy, tool-free replacement. Under an average usage of 3 hours per day, the filter lasts approximately 36 months, with a total operational lifespan of up to around 200 hours per cycle. This reduces maintenance costs while improving overall efficiency..

Powerful Suction for Soldering Laser Applications The D5 fume extractor is specially designed for soldering, laser engraving, laser marking, laser cutting, electronics repair, and DIY workshop applications. Powered by a high-speed 7500RPM motor with up to 1400Pa suction power, it helps during various workshop tasks for a cleaner working area.. 3-Stage Filter Structure Built with a triple-layer filter design including pre-filter cotton, medium-efficiency filter layer, and activated carbon filter to support smoke and dust collection during soldering and laser processing applications.. Compact Desktop Design with Low Noise Operation Designed for desktop workstations and compact setups, the D5 solder fume extractor features a lightweight 1.1kg body and space-saving structure while maintaining strong airflow performance. Operating noise stays below 65dB for a more comfortable working environment.. Adjustable 3-Speed Airflow Control The D5 smoke absorber supports 3 adjustable airflow levels for different applications. Easily adjust airflow for soldering, laser engraving, crafting, jewelry work, electronics assembly, and hobby projects.. Worldwide Voltage Compatibility Easy Maintenance The included power adapter supports AC100V-240V universal voltage for global use. The modular filter replacement design allows individual filter layer replacement for convenient maintenance and extended usability. Industrial anti-slip foot pads improve stability during operation..

Rapid Smoke AbsorptionThe BD-60X Desktop smoke Air Purifier uses a DC brushless motor. Its powerful suction can quickly capture smoke particles generated by laser engraving machines and intercept and absorb them with the filter, preventing them from being directly emitted into the room and inhaled into the lungs, thus providing you with a safe and healthy working environment. Multiple Filter DesignIt employs a 6-stage filtration system to intercept and adsorb pollutants one by one. It is equipped with filter bag pre-filterHEPA filter activated carbon filterHEPA filter activated carbon Filter. It can efficiently capture 99.97 of harmful pollutants such as metal, wood chips, and leather. The diameter is as small as 0.3 microns. The multiple design features can extend the service life of the filter.. Stepless Speed Control DesignAdopting a DC brushless motor, it is suitable for a wide voltage range of 110-240V. One-button start and random speed adjustment can meet the needs of different engraving scenarios for different wind speeds and noise levels.. Protable FlexibleThe compact and lightweight design, with a metal casing, perfectly fits the exhaust port of the engraving machine. No complicated installation is required simply plug and play. Fully EquippedIncludes extra replacement filters for extended lifespan. 4HEPAActivated Carbon Filter, 5Pre-Filter, 50Filter Bag, 1Fume Extractor, 1Smoke Pipe, 1Pipe Joint, 1Power Supply, 1User Manual Compatible replacement filters are also available for purchase, ensuring users can easily replace filters when needed.. Note The BD-60X is compatible with Xtool F1, F2, F1 Lite, and M1 laser engravers, but not with the Ultra series products..

ADVANCED 3-STAGE FILTRATION SYSTEM The KNOKOO fume extractor continuously captures soldering, laser smoke and lead fumes, directing them through a Pre-filter, H13 HEPA filter, and Activated Carbon filter to neutralize both particles and unpleasant odors. With its modular design, each layer can be replaced separately. This 3-stage structure offers a larger dust capacity and a longer service life than single-layer filters, making it significantly more cost-effective. 99.97 HIGH-EFFICIENCY PURIFICATION The KNOKOO 100W smoke extractor delivers a powerful airflow of 200 mh117 CFM while maintaining low energy consumption, thanks to its high-performance brushless DC motor. Smoke is filtered and output with a purification efficiency of up to 99.97, ensuring clean, fresh air. Breathe comfortably and protect your respiratory health with reliable, professional-grade filtration. Certified Multi-Use Air Purifier Our KNOKOO fume extractors undergo strict quality management and have obtained FCC, CE, RoHS, and MSDS certifications. This versatile system is ideal for soldering, 5W laser engraving, 3D printing, and nail salons. Note FES150S is ideal for light-duty tasks for Thick smoke and strong odor, heavy industrial use, choose our high-capacity models FES200KFES200FES350. ULTRA-QUIET INDUSTRIAL DURABILITY Engineered to 6Sigma quality standards, our soldering fume extractor supports 247 continuous operation. The heavy-duty brushless motor provides exceptional airflow while maintaining a quiet workshop environment at around 50dB in low speed. SMART CLOG ALERT DOUBLE PROTECTION The laser fume extractor monitors filter life via air pressure changes, triggering an audible beep when replacement is needed. Plus, a hidden emergency fuse box with two 2A fuses provides double electrical safety for worry-free operation. . , ..

HIGH-EFFICIENCY FILTRATION This fume extractor delivers high-efficiency filtration with a purification rate of 99.97, effectively capturing dust particles as small as 0.3m. It helps manage airborne contaminants during detailed work. As a practical smoke extractor, it supports a cleaner working environment by capturing fine particulate matter at its source.. THREE-LAYER FILTRATION SYSTEM Featuring a comprehensive fume extractor with filter design, the system includes one activated carbon main filter with 800-1000mgg iodine content, one HEPA filter, and 12 pre-filter cottons. This 3-stage structure offers increased dust-holding capacity compared to single-filter units, and the service life of the main filter is approximately 120 to 180 days under normal operating conditions. This extractor is built for sustained performance.. 250mh POWERFUL SUCTION Equipped with a 100W brushless motor, this solder fume extractor generates a strong airflow of 250mh for effective fume capture. Operates at a noise level below 55dB. The unit also functions reliably as a welding fume extractor for handling related fumes with consistent suction power.. VERSATILE APPLICATIONS Designed for hobbyists and professionals, this smoke extractor is suitable for use with a soldering iron, 3D printing, managing emissions from small laser devices, and serves as a nail dust collector. It includes two smoke hood shapes round and diamond for flexible placement. It is also an effective fume extractor for laser engraver in appropriate settings.. CERTIFICATION AND SUPPORT The fume extractor soldering complies with CE, ROSH and FCC standards. For any quality concerns, our dedicated technical team is on standby to assist with your Laser Fume Extractor.. Note New and old packaging will be shipped randomly. Quality features are exactly the same.

Designed for soldering enthusiasts FC-2001S fume extractor features a compact design with robust suction power airflow up to 128-168mh. Efficiently removes solder smoke, iron filings, dust, and captures 99.99 of fine particles. Ideal for compact workspaces and precision soldering tasks. 3-Stage Pro Filtration The FC-2001S solder fume extractor features a triple-layer systempre-filter, H12 HEPA filter, and high-iodine activated carbonto capture and neutralize 99.97 of contaminants for cleaner air. Pro-Grade High-Iodine Carbon The FC-2001S fume extractors core filter uses coconut shell activated carbon with 500-700mgg iodine content. Higher iodine value stronger purification going beyond tradition for cleaner, safer soldering environments. Surge-Resistant Technology The FC-2001S soldering fume extractor utilizes FumeClears innovative universal voltage design, seamlessly operating in both 110V and 220V environments for unmatched adaptability worldwide. No After-Sales Worries All of FumeClear products are CE and FCC certified. Our FumeClear engineers are available 247 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems. All parameters of FC-2001S have been tested by experiments, if you are dissatisfied with the noise or one other parameter please contact us immediately, FumeClear will provide you with the perfect solution.

The FC-2001X is a compact, desktop, and efficient laser fume extractor, specially designed for fume-free laser engraving. Fumeclear's extractors are widely trusted, thanks to our dedicated RD team that develops tailored solutions for various scenarios and power levels. This FC-2001X smoke extractor is engineered for laser engravers under 10W, providing sealed smoke management to ensure a smoke-free and odor-free workspacehelping you create perfect engravings in a clean environment.. Breathe easy with the FC-2001X smoke and odor filtration system. This laser engraver fume extractor features a triple-layer filterpre-filter, HEPA H13, and activated carbonto effectively capture smoke and particulate matter from various materials. The sealed unit connects directly to your machine via a hose, forming a closed-loop system that prevents leaks and keeps your workspace air clean and clear.. Featuring a Fumeclear-developed brushless motor, this laser engraver smoke fume extractor delivers stable and outstanding performance. It generates powerful suction 2.2kpa during operationtwice the suction power of other compact smoke extractorsfor rapid smoke removal. The motor also enables precise three-level suction adjustment to accommodate smoke management needs when engraving different materials, ensuring clear visibility throughout the engraving process.. Responsive Operation, Guided by Light. This laser smoke extractor has touch-sensitive controls that enable quick power-on and suction power adjustment, while one-touch suction switching offers three precise speed levels. The top-mounted LED display clearly shows real-time statusfrom operational speed to fault alertsmaking every interaction intuitive and effortless.. Product list 1 laser fume extractor suitable for 5W-10W laser engraver, 1 60mm Duct Hose, 5 Pre-Filters, 1 Hepa and Carbon Filter. Our dedicated team specializes in diagnosing equipment performance and delivering customized solutions. If any issues arise, please do not hesitate to reach outwe are committed to providing you with timely and effective support. We trust that our machine will not only solve your smoke annoyance but also enhance your engraving process..

Powerful Suction Capability The FumeClear FC2002A fume extractor for laser engraver is capable of achieving a significant suction power of up to 260mh 153 CFM, effectively absorbing all exhaust gases, powders, wood chips, iron chips, etc. within a 15cm range near the hood head. Ideal for various operational scenarios such as 10-40W laser engraving machines, cutting machines, desktop soldering,3D Printing. 99.97 Purification Rate The FumeClear FC2002A fume extractor incorporates a 3-stage filtration system designed to capture large particles, smoke and dust below 0.3 microns. With its combination of pre-filter, Hepa filter and main carbon filter, the FC2002A achieves an outstanding purification rate of 99.97, providing you with clean, fresh air. keep your eyes and lungs free from pollution. Professional Grade High Lodine Filter The FC2002A fume extractor features a main carbon filter made of highly iodized coconut shell activated carbon that provides superior adsorption and purification capabilities compared to regular activated carbon. With a maximum service life of up to 4000 hours, depending on usage, this filter offers exceptional durability and value for money. Additionally, the FC2002A comes equipped with 10 replaceable pre-filters. Aerospace-Grade Noise Reduction Structure The FC2002A solder fume extractor features an aerospace-grade noise reduction design. It is painted with noise-reducing coating and encapsulates high-density sound-absorbing sponge at each interface of the structure. The maximum noise level produced is under 55db. Worry-Free After-Sales Service The FumeClear FC2002A is CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and an exchange or return policy in case of any quality issue.

Solder Fume ExtractorSmoke TrapSmoke EaterSmoke FilterSolder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.. 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.. Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.. Easy to replace filter, Includes one smoke trap replacement filter. Working temperature -2060, Power consumption 120V, 30W 50 60Hz.. US based customer support, 30 days full satisfaction no question asked return period..

Solder Fume ExtractorSmoke TrapSmoke EaterSmoke FilterSolder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.. 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.. Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.. Easy to replace filter, Includes one smoke trap replacement filter. Working temperature -2060, Power consumption 120V, 30W 50 60Hz.. US based customer support, 30 days full satisfaction no question asked return period..

. Within the 100W class, most Fume Extractor focus on the basics. This Solder Fume Extractor raises the baroffering 99.97 purification through a multi-stage system, stable high-speed suction performance, and core safety features like sealed construction and fuse protection. All essential functions, fully equipped, at an unmatched price point. , Powered KQZ proprietary VortexForce system, the Fume Extractor Soldering delivers concentrated airflow with reduced turbulence, maintaining consistent suction performance across all speed levels. Compared to standard brushless motors in similar 100W units, airflow stability is improved by up to 40, ensuring cleaner extraction and more reliable operation in demanding workflows. , The Laser Fume Extractor features an integrated 2-in-1 filter combining H13 HEPA and high-iodine activated carbon, with carbon making up 70 of the filters total weight. This compact dual-layer design enhances adsorption of VOCs, odors, and harmful gases while reducing airflow resistance. Unlike traditional 3-layer filters, it improves purification efficiency and truly achieves 99.97 filtration performance. - Optimized for multi-scene use, this Smoke Extractor supports laser cutting, 3D printing, soldering, and DTF workflows. Its compact footprint integrates easily into tight workstations, while low-noise operation maintains a quieter working environmentideal for workshops, makerspaces, and electronics labs. ?? ? Backed by years of experience in air purification technology, KQZ is committed to delivering cost-effective solutions for creators and industrial users. Whether you have questions about model selection or need post-sale assistance, our team is ready to provide knowledgeable support throughout your journey.

- The KQZ W1 Fume Extractor can transform your workspace entirely It features a high-efficiency centrifugal motor and 168 mh air volume. Powerful suction instantly captures fumes and particles. H13 HEPA filter layer is fully covered with coal-based activated carbon, ensuring comprehensive and in-depth purification of odors and fine dust particles. This significantly reduces physical discomfort caused by unpleasant odors and smoke. . - ? The Solder Fume Extractor combines a 9mm pre-filter and H13 HEPA coal-based activated carbon premium filter cartridge. This pair works in perfect coordination to capture 99.99 of all airborne pollutants. Whether it's smoke particles or other heavy metals such as Pb, Hg, As. This design not only enables high-efficiency purification and offers cost-effectiveness, but also extends the overall lifespan of the filter. KQZ Soldering Fume Extractor is using advanced inverter technology to support a wide voltage range of 110V to 220V to ensure stable operation. Powerful extraction is achieved with just 1 button. This device is ideal for eliminating smoke and dust. It is especially suitable for 3D printing studios as well as welding and soldering workplaces. It can effectively remove harmful gases, ensuring a safer and healthier working environment. KQZ W1 Welding Fume Extractor is mini in design, space-saving and easy to carry. Its 66mm swan neck hose can be adjusted 360 for various working angles. The air outlet can accurately capture soldering fumes for fast purification. It is made of aviation-grade metal alloy and it's a high-strength, corrosion-resistant alloy that offers unparalleled durability and stability. KQZ W1 can solve all problems with a Smoke Absorber and keep your workbench clean. The Fume Extractor Soldering's package contents 1Fume Extractor, 5 Pre-Filter, 1 Efficiency Filter, 1Tube, 1Hood, 1Power Cable, 1User Manual. KQZ customer clothing company 247 wire support, Quick solution to solve the problem after selecting the puzzle. Our basic setting is to use the recommended model and the layout, providing the answer to the customer. Choose KQZ, enjoy professional services and quality products.

ELIMINATES IRRITATING ODORS Featuring 3 Stage Filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.. HIGHLY VERSATILE The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning Pyrography, 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.. STRONG SUCTION WITH SLIGHT NOISE The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. You will experience fresh, focused, and devoted working surroundings with this solder fan.. UNUSUAL STORAGE SAVER The highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop.. TOP-NOTCH MATERIAL MUIN is working diligently in making expediting products so far. We ensure quality by using ABS material in the construction of this solder extractor fan. Click ADD TO CART and be ready to get a sturdy solder fumes extractor at your doorstep.

ELIMINATES IRRITATING ODORS Featuring 3 Stage Filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.. HIGHLY VERSATILE The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning Pyrography, 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.. STRONG SUCTION WITH SLIGHT NOISE The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. You will experience fresh, focused, and devoted working surroundings with this solder fan.. UNUSUAL STORAGE SAVER The highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop.. TOP-NOTCH MATERIAL MUIN is working diligently in making expediting products so far. We ensure quality by using ABS material in the construction of this solder extractor fan. Click ADD TO CART and be ready to get a sturdy solder fumes extractor at your doorstep.

Compatible Models Replacement Filter Compatible with WECREAT PP2301 Solder Sm-oke Fume Extractor10 pack High-Efficiency Filter. High-Efficiency Filters Our filters effectively clean 99.97 of particles down to 0.3microns in diameters Also Prevents large particles such as dander,Pet hair .. TARGET AUDIENCE Pre filter helps extend filter life span by preventing hair, dust and debris from ente ing the machine. COST-EFFECTIVE 10 Pcs Pre-filter cotton replacements ensure optimal filtration performance and offer an ample supply for continuous use. Easy To Replace Easy to be replaced without any other tools Please replace regularly to keep your machine fresh and clean,For best results, remove the filter once a month and clean with a soft brush or gently vacuum. it is recommended to replace the filter every 2-3 months depending on the usage and environment.

Soundproof Chamber with Acoustic Damping Foam, Exclusive Downward Exhaust Most fume extractors have weak suction or loud noise. Zericuf solved this. The all-metal casing houses a soundproof chamber with acoustic and damping foam to trap motor noiseeven at 320mh, noise stays below 58dB. Exclusive downward-sloping rear vent prevents hot exhaust from blowing onto your desk or floor. This design works with natural convection, dramatically reducing noise. Whether for soldering or laser cutting, Zericuf delivers power without the pain.. 320mh Industrial Suction 180W Brushless Pure Copper MotorWeak fume extractors can't capture heavy soldering or laser smoke in time. Zericuf Fume Extractor packs a 180W brushless pure copper motorquieter, more durable, and more efficient than brushed motorsdelivering 320mh airflow, 60 higher than common desktop models 168-200mh. Effective capture range reaches 30cm, grabbing fumes before they reach your breathing zone. Whether for electronics repair or 3D printer exhaust, this industrial unit from Zericuf handles it all.. 3-Stage Filtration with Double-Thickness Pre-Filter H13 HEPA High-Iodine CarbonUnlike basic single-layer filters, Zericuf Solder Fume Extractor features professional 3-stage filtration Stage 1, double-thickness pre-filter sponges 10 includedtwice as thick as competitors Stage 2, True H13 HEPAcaptures 99.997 of 0.3 micron particles Stage 3, 800-900mgg high-iodine activated carbonsuperior to competitors' 600-800 levels, adsorbing toxic heavy metals and VOCs. Zericuf brings clean, purified air to your lungs.. Smart Clog Alert Longer Main Filter Life Affordable fume extractor, but killer filter costswe heard this pain. Most HEPA filters need replacement every 3-6 months at 30-50 each. Zericuf changes the game. Our H13 HEPA carbon main filter undergoes 24 quality checksbuilt to last. Plus, 10 double-thickness pre-filters trap large particles before reaching main filter. This extends filter life by 3X, saving you 150-200 yearly. Smart buzzer alerts when cloggedno guessing. We engineer long-term savings, not just smoke extractors.. Silent Swivel Casters with Brakes Articulated Positioning ArmMove freely and position precisely. Zericuf Solder Fume Extractor features 4 smooth swivel casters with front brakesroll to any spot without heavy lifting, then lock securely in place. The articulated positioning arm rotates 360 continuously, reaches every corner, and stays exactly where you bend it with zero droop. Superior airtight sealing means no fume leakage and no loose connections. With Zericuf, your multi-angle soldering station becomes more flexible than ever.. All-Metal Construction Stepless Speed Control 5-Year WarrantyCheap soldering accessories use plastic that warps and motors that lose suction. Zericuf Fume Extractor uses industrial-grade materials thick all-metal chassisheat-resistant, impact-proof 180W brushless motor maintains full power after 8 hours hose passes 5000 bend tests. Stepless knob adjusts suction from low to max. Smart buzzer alerts when filter is clogged. Zericuf offers 5-year warranty, 247 support, free parts. Choose Zericufmore than a machine, true peace of mind..

Powerful 155mh Smoke Extraction This welding fume extractor rapidly captures and removes soldering fumes, welding smoke, and toxic particles with industrial-grade suction power, ensuring a clean workspace in seconds.. High-Efficiency 3 layer Filters System Primary filter cottonIntermediate H13 grade HEPA filter cartridgeAdvanced activated carbon filter cartridge,Multi filtration system, high iodine value activated carbon filter screen, efficient smoke and odor removal. Adjustable Fume Hose Knob Control Flexibly position the 360 rotating hose to target smoke sources easily fine-tune suction intensity via the intuitive knob for precise airflow control.. Compact Powerful Desktop Design Portable Welding Fume Extractor,Space-saving footprint fits crowded workbenches without sacrificing performance, making it ideal for small workshops, labs, or home studios.. Multi-Scene Versatility Perfect for soldering, circuit board repair, welding DIY projects, 3D printing resin fumes, and nail salon acrylic dust, protecting users across diverse tasks.. Quiet Energy-Efficient Operation Low Noise Welding Fume Extractor, Low-noise motor 50dB ensures focus during delicate work while consuming minimal power, reducing long-term costs.. Easy Maintenance User Safety Tool-free filter replacement and wipe-clean surfaces CE-certified to eliminate health risks from lead, VOCs, and airborne carcinogens..

Powerful Suction FiltrationFeaturing a durable metal housing and a low-noise 7,500 RPM motor, this Fume extractor delivers a stable 106 CFM 180 mh airflow. Its high-efficiency HEPA filter effectively captures fumes from desktop soldering and small laser engravers. Soldering fume extractor with 3 adjustable speeds, you can easily control suction to protect your eyes and respiratory health.. Genuine HEPA FiltrationSolder fume extractor with 5 pre-filters and 1 Integrated filterHEPA activated carbon . The pre-filters capture larger particles, activated carbon 1000-iodine absorbs harmful odors, the HEPA filter traps 99.97 of fine particulates. Unlike cheap fan-style devices that merely blow smoke around, our multi-stage system ensures real purification and protection.. Flexible Gooseneck HoseFume extractor soldering with a 20 in flexible gooseneck hose that can be adjusted 360 and securely holds its position for precise hood placement without sagging. Made from durable, heat-resistant POM material, its built to last. Paired with FUMEGOs airflow-optimized hood, it maximizes the smoke capture area while ensuring an unobstructed view of your workspace.. Side Exhaust DesignFume extractors features a side exhaust design, which prevents airflow disruption caused by bottom ventilation, thereby maintaining a stable suction path and improving overall filtration efficiency. smoke extractor is particularly suitable for desktop soldering tasks, ensuring fresh air without the need to open windows and creating a safer and more comfortable working environment.. Safe and ReliableWelding fume extractor supports a wide 110220V input range and uses a safe low-voltage power supply for added protection. If there are any quality issues with the solder smoke absorber, our dedicated support team is ready to assist you, ensuring a worry-free experience. Note The DX50 is designed for light-duty tasks like desktop soldering and PCB repair. It is not intended for high-volume laser engraving..

POWERFUL COUNTERTOP PORTABLE RANGE HOOD TUCO countertop portable range hood provides strong airflow to help reduce smoke, grease, and cooking odors, keeping kitchens, apartments, RVs, and indoor cooking areas more comfortable. For best performance, keep the unit at least 4 from the stove.. NO INSTALLATION OR DUCTING REQUIRED Plug-and-play portable kitchen exhaust fan works instantly without external vents or setup. Designed with a 70 power cord for flexible placement in kitchens, apartments, and RV cooking spaces.. ADVANCED MULTI-LAYER FILTRATION SYSTEM Aluminum Quad-Core filter combined with a Polymer layer and Activated Carbon filter captures grease particles and helps reduce smoke and cooking odors more effectively than standard portable exhaust fans.. 3 SPEED SETTINGS LED LIGHTING Adjust airflow levels depending on cooking intensity, from everyday meals to situations with higher smoke, offering better control while cooking indoors. A built-in LED light provides additional visibility near the cooking area.. COMPACT SIZE WITH LOW NOISE OPERATION Designed to fit countertops and small kitchens while maintaining comfortable noise levels around 5065 dB during use, making it suitable for apartments, RVs, and limited cooking areas..

99.91 Purification Efficiency The VEVOR solder fume extractor is equipped with a robust 150W DC motor. The device produces an impressive airflow of 165 CFM, ensuring efficient and effective air purification. The device boasts an exceptional smoke purification rate of 99.91, ensuring that users can once again enjoy fresh air.. Advanced 3-stage Filtration System This solder fume extractor is equipped with a three-layer filtration system, comprising a cotton filter, a central HEPA filter and an activated carbon filter. The pleated design increases the filter area to 2.1m, significantly enhancing the product's filtration capacity.. Adjustable Speed Control 3 adjustable speed settings allow you to customise the airflow to meet your specific requirements, ranging from strong to weak. This flexibility allows you to maintain a comfortable working environment, which is essential for increasing productivity.. Quiet operation The FL-250 fume extractor is driven by a 150W DC brushless motor, reaching a maximum rotation speed of 4500 RPM while maintaining low noise levels. With sound emissions below 63 dB, it offers a tranquil and fresh working environment.. Compact and Flexible It measures just 11 x 11 x 16.9 inches, approximately the size of A4 paper, making it ideal for use in small solder stations and home DIY projects. Its tightly sealed metal latches prevent any leakage, and it is outfitted with four wheels, two of which are lockable, for easy and secure movement..

Efficient Suction Power Equipped with a 43W brushless motor, this solder fume extractor delivers strong suction of up to 180 mh. It effectively captures solder smoke, fine particles, and dust, making your soldering tasks more comfortable. 3-Stage Filtration System Built with a triple-layer filtration system - primary quartz cotton H11 filter activated carbon cloth 2-in-1 filter, VEVOR soldering smoke absorber efficiently traps particles and soldering smoke for cleaner air Filter comes pre-installed replacement filters can be purchased as needed. Adjustable Suction, Easy Control Three airflow levels - up to 180 mh. Easily adjust the suction to match different soldering tasks and smoke levels, ensuring smoother, more stable, and more efficient operation. 360 Flexible Fume Hose The 1.8ft exhaust pipe can rotate 360 for flexible adjustment of angles and directions to suit different work positions. Paired with the large exhaust hood to capture and direct fumes away more precisely and efficiently. Compact Sturdy Our fume absorber extractor features a metal body for enhanced durability, and four anti-slip rubber feet keep it stable on your desktop. The compact design makes it easy to carry or store ideal for home studios and DIY workspaces.

Efficient Purification Air filter consists of pre-filter, HEPA filter, and activated carbon filter, which can effectively purify air pollutants such as smoke, PM 2.5, VOC, pollen, pet dander, etc. Help you improve air quality and care for the respiratory health of your family.. PM2.5 Detection Visualize air quality. VEWIOR air purifiers use the latest technology built-in chip can detect the change of air quality around the air purifier in real time. The lower the value, the better the air quality.. 4 Purification Modes Home air purifier has 1-2-3 gear and sleep mode. The higher the level, the greater the purification wind speed and the faster the purification speed. Sleep mode is very quiet and the display will turn off, so you can enjoy fresh air as you sleep sweetly.. Filter Reminder New function When the filter has reached the end of its service life, FILTER will light up red and remind you that it needs to be replaced. You just need to press and hold the FILTER button for 3-5 seconds, and the red reminder will disappear. Please use the official VEWIOR Filter to get the best purification.. Aromatherapy Diffuser Unique fragrance diffusing air purifier. There is an aromatherapy cotton pad on the top, you can drop your favorite essential oils into the cotton pad, and with the 360cycle purification of the air purifier, the fragrance will spread to the whole room..

Twice as Effective WEP 948DQ-I fume extractor comes with filtration adsorbers both on the front and the rear to provide double filtering, adsorbing the harmful particles in the air generated from soldering.. Adjustable Tilt Angle You can adjust the tilt angle to provide better suction coverage for your soldering area. Our solder fume extractor gives effective suction to your work area from 10cm away, and our extractor fan is built with longer service lifespan to provide better durability.. Dimensions Comes in 3.5 x 5.7 x 6.5 inches compact size with built-in power switch, you can switch the extraction function ON and OFF easily. Suitable for users with work conditions that generates fume.. Assistive Tools Comes with attachable helping hands 11.8in30cm to help secure components, circuit board, wires when soldering. Also equipped with side fenders to reduce the negative impact of disruptive airflows when extracting fume from soldering.. This Fume Extractor is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket..

Essential Information - YIHUA 948DQ-I comes with 8 filtration adsorbers, 2 fenders and 1 tiltable stand for the Solder fume extractor. This product can adsorb harmful fumes generated from soldering or wood burning, effectively cleansing the air in your workplace, ensuring safety and working efficiency. Dual-filtering Function - High-quality filtration adsorbers at the front and rear help effectively filter the harmful particles and reduce odors from the fumes. Tiltable stand Fenders - This fume extractor comes with a 30-tiltable stand, allowing customers to adjust effective filtering areas according to needs. Fenders on both sides can help reduce disruptive airflows and ensure effective fume extraction. Fumes generated within the straight-line distance of 10 cm can be adsorbed effectively. Longer Operating Lifespan - YIHUA 948DQ-Is 5-blade fan can extract fume effectively with longer operating lifespan and relatively lower noise level. In the Box 1 948DQ-I Fume Extractor, 8 Filtration Adsorbers Front Rear, 2 Fenders, 1 Tiltable Stand. Choose YIHUA with Confidence Enjoy our 12-month US- exclusive manufacturer technical coverage and 247 professional assistance on Amazon. Note This model is designed to operate on 110-127V with a US-standard power plug.

Compact and Space Saving The Desktop Range Hood features with a portable design which is small and easy to store, ideal for apartments, dorms, RVs.. Detachable and Multiple Filtration This portable kitchen hood used with 3 filtersaluminum alloy filter, carbon filter and polymer filter, which can absorb grease, smoke and water vapor to purify air.. Easy to Operate The mini range hood is designed to plug in. With the soft touch button, you can easy to control the power and select three wind speed modes-Low, High and Turbo.. Efficient and Quiet Operation This portable cooker hood for kitchen with low noise, even at the turbo mode, the noise is less than 55dB.. Widely Applications Portable kitchen range hood is perfect for indoor use. Ideal for the indoor barbecue, hot pot, cooking and more.. What You Get 1 x portable cooker hood, 1 x aluminum alloy filter, 1 x charcoal filter, 3 x polymer filter, 1 x DC adapter, 1 x user manual, 1 x oil collection cup..

Upgraded Adjustable Speed KnobThe NOEVSBIG fume extractor features an upgraded adjustable speed knob, allowing for precise control with speeds up to 3300 RPM. This ensures optimal suction power tailored to your needs, making it perfect for various tasks like soldering, stained glass work, laser engraving, and DIY projects.. Powerful Suction with Pure Copper FanEquipped with a large 15050 pure copper fan diameter 150150mm, thickness 50mm, the NOEVSBIG fume extractor delivers 30 more power compared to models with 12050 fans. This provides superior suction to effectively remove fumes and smoke, ensuring a clean and safe workspace.. 4 Easy-to-Replace FiltersThe fume extractor comes with 4 additional filters that are easy to replace, ensuring prolonged use and consistent performance. These high-efficiency 0.4-inch thick filters trap harmful particles and fumes, effectively removing solder, flux, chemicals, gases, and other hazardous substances from soldering smoke. The filters further purify the air through an activated carbon layer, making it ideal for continuous use in soldering and other applications, while eliminating irritating odors in your workspace.. Multi-Function for Various ScenariosThe NOEVSBIG fume extractor is designed for versatility, suitable for soldering, stained glass work, laser engraving, electronics repair, and other DIY projects. Its multifunctional design ensures that it meets the demands of various tasks, providing a cleaner and healthier workspace. What You Get1fume extractor4 fan filters and 1manual.. Easy to replace the filterIncludes 4 replacement filters.. ESD-Safe Design The solder smoke absorber is made of ESD-safe materials..

INDUSTRIAL FUME EXTRACTOR The powerful 80W DC motor on OMTech's industrial-strength XF-180 fume extractor creates a powerful 106 cu. ft.min. airflow to pull in exhaust and purify air during any project from laser engraving to welding, soldering to machining the provided 2.6 to 4 adapter lets this fume extractor connect to 40W OMTech cutting and engraving machines. 3-STAGE FILTER Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, its central HEPA filter, and its inner activated charcoal filter to absorb all your work's harmful gases and unpleasant odors. HIGHLY MOBILE The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it. INTUITIVE CONTROL At a press of the button, you can easily adjust this purifier's air flow among three modes to match your needs. SATISFACTION GUARANTEED OMTech backs this fume extractor with our usual strong warranty and friendly 247 customer service, ensuring that you'll enjoy its use for years to come.

DUAL-INTAKE FUME EXTRACTOR The 130W DC motor on OMTech's industrial-strength XF-250 fume extractor creates a powerful 73.6 cu. ft.min. airflow through both of its tubes to pull in exhaust and purify air during any project from laser engraving to welding, soldering to machining the provided 2.6 to 4 adapter lets this fume extractor connect to 40W OMTech cutting and engraving machines. 3-STAGE FILTER Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, its central HEPA filter, and its inner activated charcoal filter to absorb all your work's harmful gases and unpleasant odors. HIGHLY MOBILE The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it. INTUITIVE CONTROL At a press of the button, you can easily adjust this purifier's air flow among three modes to match your needs our extraction tubes and hoods will powerfully purify the exhaust from two of your devices at the same time. SATISFACTION GUARANTEED OMTech backs this fume extractor with our usual strong warranty and friendly 247 customer service, ensuring that you'll enjoy its use for years to come.

INDUSTRIAL FUME EXTRACTOR The 330W DC motor on OMTech's industrial-strength XL-300 fume extractor creates a powerful 69 ft.sec. airflow to pull in exhaust and purify air during any project perfect for any size OMTech laser engraving machine, it also works well with welding tools, soldering stations, CNC machines, and more the provided 4 to 6 adapter lets this fume extractor connect to larger OMTech cutting and engraving machines. 5-STAGE FILTER Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, two polypropylene layers, and two inner activated charcoal filters to absorb all your work's harmful gases and unpleasant odors. HIGHLY MOBILE The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it. INTUITIVE CONTROL The digital control panel lets you easily adjust this purifier's air flow and offers timed operation to match each job the included remote also allows you to stay in complete control of its operation from up to 33 ft. away to let you make quick adjustments as you work. SATISFACTION GUARANTEED OMTech backs this fume extractor with our usual strong warranty and friendly 247 customer service, ensuring that you'll enjoy its use for years to come.

ACTIVATED CARBON FILTERS The filter consists of foam and activated carbon, Which is ideal for absorbing solder smoke to protect health. Please NOTE When the contamination degree of the filter cotton reaches 80, you should replace it in time. ANTI-STATIC Made of anti-static material, low noise and high- efficient fan can operate at acceptable db levels. CLOSER FOR BETTER ABSORBING You should keep the fume extractor closer to the workbench to ensure that the smoke can be completely absorbed. If you need more powerful extractors, you can buy other larger models in our store. ADJUSTABLE ANGLE Can be easily adjusted and moved to suit your DIY welding work, widely used in Soldering Station. PRODUCT PARAMETERS Voltage 110V Capacity 0.931.07 mmin With 3pcs filters. You can buy pipes separately to connect.

SOLDER FUME EXTRACTOR FILTERHigh-efficient Soldering Smoke Filter for Solder Smoke Absorber. 3 STAGE FILTRATIONIncludes a fabric pre-filter, an activated carbon filter and a photocatalyst filter which absorbs and captures fumes from solder, flux, chemicals, gases and helps to reduce unwanted odors and smells in your working spaces. CONTIAN1 Activated Carbon filter and 3 Pre-filter. DIMENSIONS4.7x4.7x0.75 in Weight 0.2 lb. GUARANTEED24-Hour Customer Support and 30-Day Money Back Guaranteed.

Solder Smoke AbsorberFume RemoverSmoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.. It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter piece is convenient and quick.. Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours.. Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption properties.. It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..

Voltage 110 V. Power 23 W. Height 27 cm. Depth 17 cm. Capacity 1 cubic metermin.