Remote Control ModuleThe FC-100A digital display version has a new remote control module. It can be placed under the table and controlled by remote control. No more bending down to operate, more convenient to use.. 99.97 Purification Rate The FumeClear FC100A fume extractor is ideal for small bench soldering. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 0.3 microns. The purification efficiency far exceeds that of small fume smoker absorbers. Keep your eyes and lungs free from pollution. Note The FC100A is not suitable for the fume extraction needs of large laser engravers. Please select the FC-2002, FC-2003 and FC-2004 fume extractor models if required. Multiple Filtration Systems 3 layers The FumeClear unique 3-layer filter design that can effectively filter out 99.97 of harmful gases and tiny impurities. And FC100A is also equipped with 10 Pcs pre-filters specifically designed to absorb large particles of dust. NOTE FC-100A Hepa Carbon Filter newly upgraded to combine 2 into 1. With stronger sealing and longer service life.. Professional Grade High Iodine Filters FC100A main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life. It is expected to last for 3000 hours and does not need to be replaced until then. Great value for money. Great Suction Power FC100A fume extractor has a much higher suction power than similar products, up to 200 mh. It can easily absorb all fine objects near the hood head, including exhaust gas, powder, iron filings, etc.

99.97 Purification Rate The FumeClear FC100A fume extractor is ideal for small bench soldering. It has a maximum no-load power of 100W and is highly effective at filtering dust particles below 0.3 microns. The purification efficiency far exceeds that of small fume smoker absorbers. Keep your eyes and lungs free from pollution. Note The FC100A is not suitable for the fume extraction needs of large laser engravers. Please select the FC-2002, FC-2003 and FC-2004 fume extractor models if required. Multiple Filtration Systems 3 layers The FumeClear unique 3-layer filter design that can effectively filter out 99.97 of harmful gases and tiny impurities. And FC100A fume extractor is also equipped with 10 Pcs pre-filters specifically designed to absorb large particles of dust. NOTE FC-100A Hepa Carbon Filter newly upgraded to combine 2 into 1. With stronger sealing and longer service life.. Professional Grade High Iodine Filters FC100A fume extractor main carbon filter is composed of high iodine activated carbon, which has better adsorption and purification effect than ordinary activated carbon and longer service life. It is expected to last for 3000 hours and does not need to be replaced until then. Great value for money. Great Suction Power FC100A fume extractor has a much higher suction power than similar products, up to 200 mh. It can easily absorb all fine objects near the hood head, including exhaust gas, powder, iron filings, etc. No After-Sales Worries All of FumeClear fume extractor are CE and FCC certified. Our FumeClear engineers are available 247 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems. If our products do not meet your usage requirements please contact us immediately, FumeClear will provide you with the perfect solution..

Solder fume extractorsmoke trapsmoke eliminatorsmoke filtersolder sucker prevention absorber DIY work exhaust fan, suitable for soldering workbench, hand engraving, jewelry welding scene use.. H13 HEPA activated carbon cotton double filter, effectively adsorbs and captures 0.3 micron pollutants such as solder, flux, chemical odor, etc. generated by welding.. PORTABLE SETUP Compact and lightweight construction allows for easy positioning and movement around your work area. The uniquely designed stepless speed regulation function is suitable for various usage scenarios with different air volume requirements. The required wind speed can be adjusted at will while avoiding interference from loud noise.. An extra set of filters is delivered with the product, so you can get 2 sets of filters. The filters are easy to replace, easy to buy, and have a longer service life.. Uniquely configured brushless DC motor, more energy-saving and low noise..

Great for workspaces using more active fluxes. Removes flux fumes from soldering workbench. Fumes are absorbed by the replaceable carbon-activated filter. Includes one replacement filter WSA350F, ESD safe. Fan is quiet and will not add significant noise to the workspace.

Professional Strong-Suction Fume ExtractorThis fume extractor effectively absorbs smoke and odors from electronic soldering, 3D printing, and nail services. For laser marking or heavy smokeodor applications, we recommend Model 309 or replacing 1-2 sets of filters weekly to maintain optimal performance as a soldering fume extractor.. Powerful Reliable Solder Fume ExtractorEquipped with a durable metal shell and a low-noise 15,000 RPM motor, this solder fume extractor delivers 168 mh airflow with under 60 dB noise. It effectively absorbs harmful gases within 5 inches. The universal 100240V power adapter offers surge and voltage spike protection for stable operation.. Triple-Layer H13 FiltrationThis soldering fume extractor uses a three-stage filtration systemHigh-Density Fiber, Carbon Cotton, H13 HEPA, and Activated Carbonto remove 99.99 of dust, mold, bacteria, chlorine, heavy metals, and harmful gases. It ensures clean air and serves as a reliable smoke absorber.. Compact Adjustable DesignFeaturing a metal body and a 5-foot power cord, this smoke absorber saves space. Its 360 adjustable hose 725 inches offers flexible placement, making the fume extractor suitable for various workspace layouts.. Quality Assurance Exceptional SupportEach soldering fume extractor is 100 quality-inspected. Backed by a 3-year warranty, we are committed to providing professional-grade fume extractors and dependable customer support..

Professional Smoke Capture Purification The upgraded solder fume extractor can effectively captures and eliminates harmful welding, soldering, and engraving fumes. The fume extractor can remove 99.97 of dust and odors, making the air in the workshop healthier. Dual-Layer HEPA Carbon Filtration Our smoke air purifier features a 4-stage system. Dual HEPA and activated carbon filters can capture 99.99 of harmful particles. As a reliable smoke absorber, it can capture harmful gases and unpleasant odors, providing you with ultimate protection. Designed specifically for precision PCB work ideal 2-3 inch working distance, this 7W low-power soldering fume extractor provides targeted suction to capture fumes right at the source. This fume extractor is optimized for small work areas, not large ventilation.. Versatile Use The solder fume extractor has a durable metal casing that can withstand impact. It is suitable for precise work such as welding stations, jewelry making, and engraving. The smoke eater can adsorb harmful fumes generated from soldering or wood burning, effectively cleansing the air in your workplace. Easy To Replace Filter And Use The soldering fume extractor does not require any tools, and the pull ring filter design enables quick replacement. The universal 110V-240V adapter ensures safe use worldwide. The efficient smoke absorption are durable and reliable for any welding workspace.

Efficient Smoke Absorption-The solder fume extractor quickly and effectively removes smoke, dust, and odors from your workspace. Whether you're soldering or welding, this device ensures a clean and healthy environment. This Solder Smoke Absorber comes with 2 filters for you change. Wider Smoking Range Our soldering fume extractor is equipped with two detachable magnetic wings, which can expand the coverage area for smoke extraction. You no longer need to worry about smoke escaping anymore. Compact and Portable Design-With its lightweight and compact build, the fume extractor is easy to move and store. Perfect for small workspaces, labs, or home use, it fits seamlessly into any workspace without taking up much room. Low Noise Designed with a low-noise motor, the solder smoke absorber operates with minimal noise, ensuring a quiet working environment during use. Easy to Clean and Maintain-The detachable filter system makes cleaning and maintenance a breeze. Simply remove the carbon filter, clean or replace it, and your fume extractor soldering is ready to go again. Durable and long-lasting, its a reliable tool for any solder workspace.

99.97 Purification Rate- The FC2003 fume extractor is equipped with 2 ports that can work simultaneously, making it ideal for use in a factory assembly line, multi-machine studio, and beauty salon. It is highly effective in filtering out dust below 0.3 microns, with a purification efficiency of up to 99.97. A great value for your money. Multi-Filtration System 3 Layers- Compared with ordinary 2-layer filtration systems, the 3-layer filter design of FC2003 effectively filters out 99.97 of harmful gases and micro impurities, resulting in a better purification effect. Keep your eyes and lungs free from pollution. In addition, FumeClear FC2003 is equipped with 10 pieces of pre-filter cotton.. Professional-Grade High Iodine Filter- The main carbon filters used in the FC series fume extractors are made of high-iodine coconut shell activated carbon, which has double the adsorption and purification effect of ordinary activated carbon, and a long service life that can last anywhere from 2000-4000 hours depending on its use.. Great Suction Power- The FC2003 has two air inlets that can work simultaneously, with a suction power of up to 330 mh when working with a single inlet and 165 mh when working with two inlets. It easily absorbs all fine objects within 15 cm, including exhaust fumes, hair, iron filings, paper, etc. It truly guards your health and keeps you away from pollution.. Worry-Free After-Sales Service- FumeClear FC2003 has been CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and a return or exchange policy in case of any quality problems..

Desktop Soldering Fume ExtractorCompact Yet Powerful This fume solder extractor is specifically designed for manual soldering work stations. Equipped with brushless motor and button for airflow adjustment, fume extractor soldering delivers a powerful airflow of up to 180 mh at a max speed of 8608 RPM. The fume extractor soldering captures harmful fumes larger than 0.3 microns within one second, instantly the air ensuring efficient fume control.. KINGSOM lab tests confirm dual HEPA and pre-filter delivers superior performance. The pre-filter captures fine particles like rosin fumes and metal dust, while the main filter activated carbon layer adsorbs harmful gases and neutralizes odors.Powered by a high-speed brushless motor, the KS01 provides strong, stable suction to capture solder fume, boosting overall filtration efficiency. Ideal for electronics engineers, maintenance technicians, and DIY enthusiasts.. 3 Speed Adjustable Suction Adapts to Diverse Scenarios. This welding fume extractor has physical buttons for quick speed adjustment, with LED indicators displaying the current setting in real time. The LED screen simultaneously shows operational status and alerts for abnormal conditions. Equipped with a 0.8m hose adjustable through 360, fume extractor soldering works with a rubber dust collection hood to precisely capture fumes and enable directional control.. Adjustable Exhaust HoseCapture Fumes at the Source The soldering fume extractortor eliminates odors and removes dust generated by 3D printing, nail art, and inkjet printing. The adjustable hose ensures secure positioning, while the fume extractor soldering features a durable metal frame for reinforcement. Paired with the exhaust hood, its flexible angle and direction adjustment adapts to various working posture for efficient capture and exhaust. maintaining a clean, smokedust-free workplace.. Replaceable Filter Cartridge Combo PackYour soldering fume extractortor includes 5 pre-filters and one 2-in-1 filter. The pre-filter features a dense fiber structure for extensive filtration surface area. The HEPA H13 filter utilizes activated carbon for powerful filtration enhancement, together forming a dual-stage system achieving 99.97 efficiency. The main filter and one pre-filter are pre-installed and ready to use, with four spare pre-filters included for future replacement as needed.. KINGSOM Service Available 247 - Here to Listen, Ready to Help If If you encounter any issues with your fume extractor or have questions about its filters, please don't hesitate to contact our technical support team. We will collaborate with our product specialists to analyse the problem and provide you with a tailored solution..

COMPACT DESKTOP DESIGN SPACE-SAVINGLooking for a Solder Fume Extractor that won't take up your entire workbench Measuring only 5.1 x 5.1 x 6.3 and weighing just 3 lbs 1.4kg, this Soldering Fan is born for hobbyists with limited space. Whether you are soldering in a tiny apartment, a crowded home office, or a basement crafting corner, it sits perfectly on your desk without getting in the way. Easy to move, easy to storeyour ultimate space-friendly health guardian. 99.99 EFFICIENT with 168mh SUCTION POWERDon't let the small size fool you. Powered by a high-speed centrifugal motor, this Fume Extractor Soldering delivers a highly effective 168mh airflow. It provides just the right amount of suction to instantly capture harmful fumes and smoke before they reach your face, without cooling down your soldering iron tip. Perfect for amateur soldering, PCB repair, and everyday DIY projects where massive industrial power isn't necessary. PRO-GRADE H13 HEPA FILTRATIONThis Soldering Fume Extractor is driven by premium H13 HEPA. It effectively traps 99.99 of microscopic fine dust and dense rosin smoke, while its evenly distributed carbon powder noticeably reduces light odors to keep your workspace fresh. Additionally, the system includes a high-density, 10mm thick pre-filter. It instantly blocks large particles and flux splatters, preventing premature clogs and ensuring your main filter maintains peak performance for longer. FLEXIBLE HOSE CUSTOMIZABLE NOISE CONTROLExperience complete control over your workspace with Soldering Fan Fume Extractor. The shape-retaining flexible hose can extend up to a maximum of 25.6 inches 0.65m and can be freely 360 bent. This allows you to precisely position the suction head exactly where the smoke is generated. Plus, the stepless rotary knob lets you easily adjust the fan speeddial it up for heavy smoke, or turn it down to minimize noise when you need a quiet environment. YOUR PROFESSIONAL DESKTOP SAFETY GUARDIANBeyond electronics repair, it serves as a versatile, everyday ventilation tool for stained glass making, woodburning pyrography, 3D resin printing, and jewelry crafting. Offering robust health protection, it is an ideal gift for DIY enthusiasts and makers. Furthermore, its compact design makes it perfectly suited for bulk procurement by schools and training institutions to protect students during manual soldering classes. Every NEETOP product is built for long-term use and backed by reliable warranty support for warranty activation details, please contact our customer support team. Our professional technical team is always on standby to provide one-on-one assistance whenever you need help with installation, filter replacement, or product setup. If you ever have a question, simply reach out to uswell make sure you get the support you need and a worry-free experience from day one.

Powerful Suction with 3 Adjustable Speeds Equipped with a high-speed 10000RPM brushless motor and three fan speed settings, this solder fume extractor quickly removes harmful smoke for a cleaner, safer workspace. Effective Filtration System Uses replaceable high-density activated carbon filters to absorb toxic fumes and fine particles, protecting your respiratory health during soldering. Portable Type-C Rechargeable Design Compact, cordless, and easy to carry, this fume extractor supports DC 5V Type-C charging for maximum convenience in mobile soldering setups. Charge fully in about 2.5 hours using a Type-C adapter indicator shows red while charging and turns off when complete.. Compact Space-Saving Design Built with a mini form factor to fit comfortably on any workbench without clutter. Ideal for tight spaces, home labs, or portable setups where space is limited. Built-in LED Ring Curing Light An adjustable LED ring around the air inlet ensures clear visibility, while the air outlet features a curing light for improved soldering efficiency and precision.

2-IN-1 The WEP 948DQ-III Fume Extractor Soldering Station includes a detachable soldering iron, iron holder, tip cleaner, 3 soldering tips, 8 activated carbon filters, solder wire dispenser, 35g LEAD-FREE solder wire. Satisfying your need for a solder smoke absorber, and a soldering station.. Multi-function This fume extractor can be used as a soldering fan to effectively adsorb harmful particles from the fume generated from soldering. Combining a high performance 110W soldering station into the compact size of a fume extractor. The fume extractor and soldering station come with individual power switches, and you can turn them on individually or together.. Effective Suction Maximum effective suction distance is 3.9 inches, and with activated carbon filters fitted on both the front and rear. The fenders prevent disruptive airflow from impacting effective fume extraction, improving the effective adsorption.. Soldering Functions The soldering iron stations LED digital display provides clear reading and shows parameters include PID temperature stabilization indicator, FC conversion function, sleep mode 10-minute, and automatic shutdown functions.. Warranty Policy This Fume Extractor Soldering Station Kit is covered by our USA exclusive 1-Year product warranty, and our technical support team has your back with our 24-Hour support. NOTE this product is rated for 110127V USA Specification, DO NOT connect this iron to a 220V power socket..

Made in Japan.

K-SOON2 Fume Extractor Exceptional Performance, Wide Compatibility This fume extractor is the ideal choice for soldering, laser engravingcutter, and 3D printers. With a powerful suction capacity of 210 mh, 99.97 filtration efficiency, low noise levels, three adjustable speed settings, an LED status display, and responsive button controls, its the perfect way for your fume extraction needs. Speed settings to meet various application needs This is not just a soldering fume extractor, but also a laser fume extractor The first speed setting is suitable for most basic welding tasks. The second setting handles fumes generated by 3D printing, and the third setting effectively removes fumes produced by a 5W laser engraver when processing materials such as wood. You can select the desired speed setting using the one-touch suction adjustment feature based on your specific work requirements.. Multi-stage Filtration to Protect Your Respiratory Health99.97 Ultra-Efficient Filtration Odor Removal. Equipped with a pre-filter and HEPA H13 filter with an activated carbon layer, it effectively captures particulate matter and eliminates odors. The K-SOON2 fume extractor filters particles smaller than 0.3 microns, along with harmful gases and odors from soldering, laser engraving, 3D printing, and electronic repairs, achieving up to filtration 99.97 efficiency.. Package Contents This 100W fume extractor includes a filtration unit, ducting, an exhaust hood, a main filter, and five pre-filters. Its 1.2-meter 47.24-inch adjustable ducting stays securely in place without sagging, ensuring precise fume extraction. The main filter and one pre-filter are pre-installed, allowing for immediate use. The LED display shows operating status and alarm messages. The pre-filters work in conjunction with the activated carbon system to ensure a smoke-free and odor-free workplace.. KINGSOM Service Available 247 - Here to Listen, Ready to Help If If you encounter any issues with your fume extractor or have questions about its filters, please don't hesitate to contact our technical support team. We will collaborate with our product specialists to analyse the problem and provide you with a tailored solution..

Solder Fume ExtractorSmoke TrapSmoke EaterSmoke FilterSolder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.Two additional filters. The super large fan effectively removes smoke from a 10-inch area.This soldering fume suction fan is larger than similar fans on the market. It uses a 66-inch fan, thus having a wider suction range.. The soldering fume extractor is equipped with a dimmable LED light, allowing for free adjustment of brightness.. The light is positioned near the top at an angle so as to shine downward onto your workpiece instead of shining straight forward. The light is independent of the fan so you can turn the light on or off while the fan is running. The light also has a brightness knob so you can vary the brightness.. The soldering fume extractor consists of an all-metal housing, a dimmable LED light, and a plastic handle. Two additional filters.

WalkCleaner smoke purifier for laser engraver,laser engraver air purifier, smoke extractor, Fume extractor for laser cutter,Solder Fume Extractor,238w, Low-Noise,4-Stage Filtration,99.98 Purification Rate. Whisper Quiet Air Purifier with no more than 45dB noise rate, it ensures a quiet working environment,Actual measured power is 238w,The measured wind speed of the air inlet is 26.5ms. 4-Layer Filtration 99.98 Smoke Removal Rate with pre-filter, extended HEPA filter and premium activated carbon, smoke purifier will perform efficiently with up to 99.98 air purification rate. User-friendly Workmanship a. Smart control panel remote control for versatile and complex environments.No need to bend under the table to switch or adjust the wind speed, remote control can be achieved. b. Timed setting based on working hours, eliminating the need for constant manual supervision and freeing up manpower. c. Intelligent clogging alarm system for filters, effectively predicting the replacement cycle of filters. d. Equipped with brake casters for easy mobility or stationary positioning.. Combination and Usage Scenario The smoke purifier can be used in conjunction with a laser machine enclosure to effectively purify toxic and harmful gases generated during laser marking, engraving, and cutting. It also allows you to enjoy the fun of DIY by observing the laser machines operation through the transparent window of the enclosure. Additionally, it can be used for enclosed 3D printing smoke treatment and purification.. Better service All our products have passed CE and FCC certifications. Our WalkCleaner engineers are available around the clock to provide problem-solving and services for you. In addition, if there are any quality issues, you can return or exchange the product at any time..

Essential Information - YIHUA 948DQ-I comes with 8 filtration adsorbers, 2 fenders and 1 tiltable stand for the Solder fume extractor and a pair of detachable helping hands. This product can adsorb harmful fumes generated from soldering, effectively cleansing the air in your workplace, ensuring safety and working efficiency.. Dual-filtering Function - High-quality filtration adsorbers at the front and rear help effectively filter the harmful particles and reduce odors from the fumes.. Tiltable Stand Fenders - This fume extractor comes with a 30-tiltable stand, allowing you to adjust the effective filtering areas according to needs. In addition, fenders on both sides can help reduce disruptive airflows and ensure effective fume extraction. Fumes generated within the straight-line distance of 10 cm can be adsorbed effectively.. Detachable Helping Hands - This product comes with a pair of detachable helping hands Length 30cm10, which can fixate objects such as PCD or wires while soldering. This allows users to solder more flexibly.. Choose YIHUA with Confidence Enjoy our 12-month US- exclusive manufacturer technical coverage and 247 professional assistance on Amazon. Note This model is designed to operate on 110-127V with a US-standard power plug..

4-Stage Fume Extractor Keep your workspace clean with OMTech's fume extractor Its 4-stage filtration, with cotton, polypropylene, activated carbon, and HEPA filters, absorbs harmful gases and unpleasant odors during tasks like laser engraving, welding, soldering, and more. Fume-Free Crafting The 300W DC motor on this smoke absorber creates a powerful 467 m3h 275 cfm airflow through its 360 swivel tubes, pulling in fumes and purifying air with an impressive 99.97 efficiency. Command at Your Fingertips The digital control panel on this purifier lets you select from 10 speed levels and set a timed operation from 1 to 300 min. to match each job. The included remote control allows you to stay in complete control of the operation as you work. Highly Mobile The 4 quality caster wheels move this compact smoke purifier easily between your devices, locking securely in place once you're ready to go. The two built-in handles make transportation a breeze, letting you craft wherever inspiration strikes. Wide Compatibility With three versatile adapters 3.2 to 4.7, 3.2 to 5.9, and 3.2 to 2.6, our smoke extractor seamlessly connects to a variety of cutting and engraving machines, ideal for all types of tasks.

Two port fume extractor. This model does not include duct kits. Specially designed for use in the electronics soldering process. Extracts contaminated air directly at the source. 3-Stage filter system for superior air purification.

Cleaner Air, Easier Soldering Compact yet powerful, this solder fume extractor features a 40 W brushless motor that efficiently captures solder smoke and particles at the source, helping create a cleaner, more comfortable soldering environment. Double-Layer Filtration Primary quartz cotton and HEPA filter work together to capture most solder fumes and dust, effectively filtering out harmful gases and tiny impurities for cleaner air Filter comes pre-installed replacement filters can be purchased as needed. Adjustable Suction, Easy Control VEVOR solder smoke absorber features a 080 mh adjustable airflow to match different soldering tasks and smoke levels. From ON to MAX, simply turn the knob to adjust airflow for more efficient operation. 360 Flexible Fume Hose The 1.8ft exhaust pipe can rotate 360 for flexible adjustment of angles and directions to suit different work positions. Paired with the large exhaust hood to capture and direct fumes away more precisely and efficiently. Compact Sturdy Our fume absorber extractor features a metal body with a precise interior to prevent smoke leakage and ensure durability. Four anti-slip rubber feet keep it stable on your desktop, and the compact design makes it easy to carry or store.

Quick, safe, and efficient way to absorb soldering smoke and fumes. Filters are easily replaced. Can be used in a vertical standing up position or low-profile position laying down. Standard activated carbon filter A1001 absorbs up to 80 percent of the odors from the air. Optional high-efficiency filter PN 999-198 removes up to 90 of airborne particles.

Efficient Dual-Side Filtration System This solder fume extractor features an innovative dual-side filtration design. Unlike single-filter models, this smoke absorber creates a wider capture zone, significantly enhancing the efficiency of fume extraction and providing superior protection against harmful soldering smoke. Powerful Motor with Effective Suction Equipped with a robust motor, this fume extractor delivers strong suction with speeds of 2400-2700 RPM. The solder fan effectively captures smoke at the source within a 5-6 inch range, preventing it from spreading and a comfortable environment is provided. All-in-One Soldering Station with Light Hands This 3-in-1 smoke absorber integrates a bright LED light and two flexible helping hands. The light illuminates your work area in low-light conditions, while the alligator clips securely hold components, making this Solder Fume Extractor a complete solution for soldering tasks. Fully Adjustable for Optimal Positioning This fume extractor is designed for maximum flexibility. It features an adjustable-angle bracket for optimal positioning of the suction head, and the articulated helping hands can be moved and locked into place, ensuring the Solder Fan and clips are exactly where you need them. Ready-to-Use for Various Applications As a dedicated solder fume extractor, this unit operates on standard 110V AC power for immediate plug-and-play use. Its comprehensive design makes this smoke absorber an essential and versatile tool, perfectly suited for a wide range of soldering and DIY projects.

99.97 Smoke Purification Effect The smoke purifier is powered by a high performance brushless DC motor that maintains powerful and stable performance. It provides a large airflow while keeping the noise level low. Its high airflow rate ensures effective smoke and particle removal, making it an ideal helper in keeping your workplace clean and safe. Adjustable Speed and LED Display The speed of the smoke cleaner can be adjusted according to your working needs. The speed from strong to weak can meet different working requirements. And the purifier is equipped with LED display, you can see the value of suction air volume suitable for different work in real time, making the operation more accurate and faster. 3-Layer Filtration System The fume extractor features a pre-filter, HEPA filter, and activated carbon filter that removes 99.97 of dust, trace contaminants, and harmful gases. Each layer is individually replaceable. The three-layer filtration structure provides greater dust removal capacity, longer service life, and lower cost than a single-layer filter core. Universal and Space Saving Design The fume extractor comes with a universal bellow pipe that can change direction and position 360 degrees, from 7.5 inches to 20.5 inches. This allows you to place the fume collector anywhere in your workspace, saving space and keeping the environment clean. The metal latch tightly encloses the main filter body to prevent leakage. Wide Application Range Fume purifiers can be used in a variety of scenarios to clean harmful gases such as smoke, oil fumes, and dust particles from welding, laser engraving, and other processes in a timely manner. It can also be used in 3D printing, home DIY, nail art and more. With its stable and reliable performance, the purifier ensures a safe and pollution-free working environment for you.

Adjustable Wind Speed The wind speed can be adjusted according to your needs, at medium wind speed, the smoke generated within a linear distance of 20 cm can be effectively adsorbedensuring a clean and safe working environment. Dimmable LED LightThe solder fume remover equips with built-in led lights, which allows users to see the details of soldered items clearly. There are also knobs to adjust the light's brightness and fan's suction.. Strong Suction with Slight Noise You will experience fresh, focused, and devoted working surroundings with this solder fan. It is a perfect choice for electronics repair, woodworking, jewelry making, or any other DIY project. Dual-filtering FunctionEquipped with 0.11-inch and 0.39-inch thick activated carbon filters. It can better absorb and capture the smoke generated by soldering. In comparison with other products, we also provide a 2-meter long exhaust pipe, which can discharge the fumes to the outside. Wide applicationThe soldering smoke remover is equipped with a sturdy and stable metal iron clamp with strong clamping force. The iron clip can clip plates with a thickness below 3cm. The iron clamp is connected to the gooseneck tube and can be freely bent and rotated. Keeping the fan head in place without any sagging or falling..

Solder Smoke Absorber Kit The 948DQ-I soldering fume extractor arrives ready to use, featuring 8 replaceable filter, 2 side panels, a 30 adjustable stand, and a pair of detachable helping hands 11.8 inches. This all-in-one setup helps protect your workspace from soldering fumes and provides hands-free soldering assistance.. Dual-Stage Filtration System Equipped with high-efficiency particulate filters at both intake and exhaust points, this system works to capture fine smoke particles and reduce unpleasant odors generated during soldering, helping to maintain cleaner air in your immediate breathing zone.. Tiltable Stand Fenders Position the fume extractor at the optimal angle with the 30 tilting stand. The included side panels help minimize air interference, focusing suction to effectively capture fumes within a 4-inch range of the soldering iron tip.. Integrated Helping Hands with Flexible Arms Features a pair of detachable, adjustable helping hands with alligator clips to securely hold PCBs, wires, and other components. The 11.8-inch arms provide flexible positioning for more stable and precise soldering work.. Pure Copper Motor for Reliable Performance Built with a pure copper core motor, this solder fume extractor is engineered for stronger suction force and enhanced operational longevity, providing consistent fume extraction through extended soldering sessions..

High-Efficient Absorb Optimized 2800 RPM high suction fan is low noise, Strong absorption, effectively absorb the toxic fumes, air purification.. Upgraded Design Pure copper motor.The enclosure is made from metal.4 non-slip heavy-duty rubber feet anchor the unit to the ground. A handy carrying handle allows you to move the unit easily.. Easy to replace the filter Includes two replacement filter.. ESD-Safe Design The solder smoke absorber is made of ESD-safe materials.. 100 Satisfaction Service Export products 100 quality inspection, all customers support 3 months of unconditional exchange or return policy and promise to provide a 3-year after-sales service..

More Replacements We provide 4pcs activated carbon filters, the replacement quantity is more than others, it's easy to replace filter, 0.2 inch thick activated carbon filter with denser holes absorbs and captures fumes from solder. Stronger Suction Solder fume extractor with long-lasting working time for over 50,000 hours, it can absorbs smoke from 4-7 inches away, do a good job of removing any smoke and reducing laser odors. Lower Noise Compared to others, our fume extractor soldering makes less noise, with this solder fan, you will enjoy a fresh, focused and focused working environment when welding in a closed, poorly ventilated space. CEUL Certification This fume extractor fan is made of sturdy aluminium alloy material, certification is complete, safe and reliable, with powerful remove fume extrator and handy carry, it doesn't take up much space in the work area. Widely Used This welding fume extractor is great for soldering of electronics, wood burning, 3D printing, laser engraver, stained glass work, arts, crafts, DIY projects, acrylic nails, jewelry making and smoking..

Powerful Suction with 3 Adjustable Speeds Equipped with a high-speed 10000RPM brushless motor and three fan speed settings, this solder fume extractor quickly removes harmful smoke for a cleaner, safer workspace. Effective Filtration System Uses replaceable high-density activated carbon filters to absorb toxic fumes and fine particles, protecting your respiratory health during soldering. Portable Type-C Rechargeable Design Compact, cordless, and easy to carry, this fume extractor supports DC 5V Type-C charging for maximum convenience in mobile soldering setups. Charge fully in about 2.5 hours using a Type-C adapter indicator shows red while charging and turns off when complete.. Compact Space-Saving Design Built with a mini form factor to fit comfortably on any workbench without clutter. Ideal for tight spaces, home labs, or portable setups where space is limited. Built-in LED Ring Curing Light An adjustable LED ring around the air inlet ensures clear visibility, while the air outlet features a curing light for improved soldering efficiency and precision.

Solder Smoke AbsorberFume RemoverSmoke Extractor The smoke from soldering is toxic during soldering, is harmful to your health. Our 3in1 soldering smoke absorberfume removersmoke extractor prevention absorber DIY working fanwith Carbon Filter LED Daylightprotect you away from poisonous smoke. Angle flexibility amply meets the various situations, can precisely cover the smoke diffusing area. Low Noise Fan with Smoke Filter ESD safe smoke Extractor fan can extract away the solder, flux, chemicals, gases or other hazardous substances in the solder smoke, and purified by the activated carbon filter net. Extra 3 easily replaceable filters give you good and timely smoke prevention filter supplements. Recommended filter net replacement every 4 to 5 months depending on usage. Multifunctional LED Lamp At the time of smoke absorbed fan working, its 3 Light Colors 3000K-4500K-6000K and 10 Brightness Levels can help you work in various light conditions. Natural light illumination, soft and without ghost, glare, protect eyes. You can adjust and use according to your needs. Note The overall brightness will be soft as we use eye-friendly LED beads. 2Pcs Flexible Universal Arms The alligator clips of helping hands comes with a rubber protective cap, protect the PCB from short or avoid item damaged because of the sharp clip jaw. You can perform maintenancewelding etc. items with two helping arms, and at the same time to use solder smoke absorber can improve your work efficiency better. Note Alligator clips are mainly used to hold small and light objects such as PCBs, and cannot bear heavier objects.. Adjustable Arms The lamp head can be put 220 degrees up and down, and 360 degrees swivel. 8.85 inches and 8.85 inches extendable long arm and expanded up to 17 inches. And equipped 3 fixed knobs and 2 pair fixed springs help you adjust the lamp position smoothly without swaying left or right, neither sharp falling nor shaking. Kindly Note To ensure the best smoke absorbing, please make the fan and solder joint within 10inches25cm. Please refer to the product video content for the best use distance and use direction..

Laser Fume Extractor for Engravers This 210W suction laser fume extractor delivers 360mh strong suction with 17ms airflow, specifically designed for laser engravers under 500W, including S1F1M1LU3 laser fume extractor compatible models like F1 Ultra, M1, and LU3. Perfect for laser cutting, engraving, and marking applications as a dedicated laser engraver fume extractor.. 4-Stage Filtration System for Smoke Odor Features pre-filter medium filter HEPA activated carbon a true 4-stage filtration system capturing 99.97 of particles as small as 0.03m. The high-iodine coconut shell activated carbon absorbs fumes, odors, and harmful gases, making it an ideal solder fume extractor, soldering fume extractor, laser welding fume extractor, and 3D printing fume extractor.. Low-Noise Portable Smoke Purifier Operates at 50dB for quiet operation in workshops, dental labs, nail salons, and home studios. This low-noise fume extractor features a compact 16.5 x 9.5 x 18.1 design with built-in wheels for easy mobility between workstations. A true smoke purifier and smoke extractor for desktop soldering fume extractor needs.. Multi-Scene Fume Extraction Versatile for soldering fume removal, 3D printing, wood engraving, nail dust extraction, and moxibustion therapy. This fume extractor soldering unit includes flexible bamboo joint hose and funnel hood for precise smoke absorption at the source. Also works as a laser engraver smoke absorber for various laser machines.. Complete Desktop Fume Extraction Kit Comes with 10 pre-filter pads, medium filter, HEPA filter, adjustable air valve, and exhaust hose. Supports internal recirculation or external exhaust modes. A complete FumeClear Laser Fume Extractor kit. Package Includes 1 x Extractor, 1 x Hose, 1 x Funnel Hood, 1 x Air Valve, 10 x Pre-Filters, 1 x Medium Filter, 1 x HEPA Filter, 1 x Power Cord, 1 x Manual..

Multi-Application smoke extractor The Solder Smoke Absorber can be used as a Solder Smoke Absorber for Soldering DIY Working Station. The solder smoke absorber can also be used in the kitchen, bathroom, grow tent fan,workshop or any space requiring clean air soldering. Adjustable Positioning ArmMemory Stainless Steel Gooseneck TubeThe flexible gooseneck tube is made of high-quality stainless steel, ensuring durability and stability. According to your soldering work, the angle adjustment can provide you with a comfortable use experience. Our fume extraction system is equipped with a flexible exhaust duct that effectively vents soldering fumes outdoors, maintaining a clean-air workspace. The retractable ventilation hose extends up to 10 feet 3 meters to accommodate various workstation configurations, ensuring optimal fume removal at the source.. Precision Airflow Management Featuring stepless speed regulation 50-200 CFM, this ESD-safe fume extractor enables real-time airflow optimization through its ergonomic rotary control knob. The variable-speed drive allows 5 velocity accuracy for delicate soldering tasks while maintaining 65 dBA noise levels, with dual-range operation .. Product list1Fume Extraction Unit,1ACDC Power Adapter,1Flexible Duct Assembly 3m tubing,1Modular Mounting Bracket.

This fume extraction arm is about 3.3ft, 75mm OD, 68mm ID, which is an ideal choice for soldering stations, electronics labs, DIY workshops, and various industrial applications. It efficiently removes smoke and dust generated during tasks like soldering and laser engraving, creating a cleaner and safer working environment for you.. Equipped with a highly flexible universal arm tube, it supports multi-angle rotation and can be bent and set into any shape. You can easily position the suction inlet to target smoke sources from any direction, achieving precise extraction without being restricted by your work area, making operation more convenient.. The hose features a reinforced structural design, ensuring it maintains its shape and resists sagging or deforming even after long-term use. Its overall airtight design minimizes airflow loss, guaranteeing a consistently powerful negative pressure suction that leaves no fumes behind.. A convenient manual damper is integrated into the arm, allowing you to easily regulate the suction volume based on different task requirements such as precision soldering or high-power laser work. This gives you flexible control over your ventilation system.. The front suction hood is manufactured from high-temperature resistant materials, making it safe for use in high-heat environments. During tasks that generate significant heat, like soldering, you can confidently place the hood close to the source for efficient, point-of-origin extraction while protecting the equipment..

- Horizontal or vertical Works efficiently in different environments. As long as you turn on the button, you can stop breathing the evil and smelly soldering fumes.. - ESD protection Surge protection suppress voltage transients and divert excessive current away from sensitive electronic components to protect your electronics.. - Easy to replace the filter Come with 2 filters, made of features urethane foam and activated carbon. Capture and absorbs of fumes and harmful smoke, ensures a breathable environment in your workspace.. - EC motor It can absorb smoke from 4-5 inches away, low noise, high energy saving, small vibration, Long-lasting working time for over 57000 hours.. - Smooth surface Made of high-grade ABS components, which makes it very durable and sturdy. Its small size allows users to keep it close to themselves without occupying too much space..

Shurex 12 Pack Activated Carbon Filter Replacement Refills for KOTTO Solder Smoke Absorber Remover Fume Ventilation Extractor Flux Smoke Prevention Absorber, Compatible with ToolBud Solder Fume Extractor And Your DIY Fume Extractor with 4.74.7 Fan Unit. Eliminate toxic fumes from lead soldering Absorbs and neutralizes smelly odors. This works well for filtering flux smoke. Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter. 12 Pack Each package includes 12 activated carbon filter replacement cartridges, providing a long-lasting and cost-effective solution for your fume extraction needs. Premium Quality Made from high-quality activated carbon, these filters effectively capture and remove harmful fumes, odors, and particles from the air, ensuring a safe and comfortable working environment. Each product is individually sealed and will not be exposed to air to weaken the adsorption capacity.

LIGHTWEIGHT AND PORTABLE - High Vacuum Fume Extraction System.. EQUIPPED WITH CURRENT SENSOR TECHNOLOGY - Automatically StartsStops Extraction When Current Is Detected. QUIET OPERATION - Operates At A Sound Level Of 80DbA. VERSATILE - Can be Used for Stick Light Duty, Tag, Mig, and Flux-Cored Light Duty. MULTIPLE EXTRACTION SETTINGs - CFM Strength Can Be Selected Based On Environmental Conditions.

This USB Adjustable Speed Solder Smoke Absorber is a must-have for anyone who needs to keep their workspaces clean and safe from harmful fumes.. With its adjustable speed settings, plastic construction, and pipe tube, this extractor fan is versatile and easy to use.. It Is perfect for hobbyists, DIY enthusiasts, and professionals who work with soldering irons or other tools that produce smoke and fumes.. Use it in your kitchen, bathroom, or workshop to keep the air clean.. Whether you're working on a small project or a large one, this extractor fan will help you stay comfortable and productive all day long..

360 Free Rotation Design The unique multi-joint structure enables 360 full rotation, allowing flexible adjustment in any direction, making it adaptable to various operational environments.. High-Density Material Made from high-density material, it is strong and durable, ensuring long-term use without deformation.. Stable and Secure The specially designed fixed base and tightening knob ensure that the equipment is securely installed without wobbling, providing safer operation.. Multi-purpose Application Suitable for laboratories, factories, chemical plants, and other settings, effectively removing gases and protecting operator safety.. Thickened Material and Large Hood The thickened duct design enhances gas absorption efficiency, and the extra-large hood provides a wide absorption area..

Solder exhaust pipe for smoke purifier,Universal positioning bamboo tube,360 positioning Laser Fume Extractor Smoke Purifier Smoke Absorber Remover,Solder Fume Extractor. 4-Layer Filtration 99.98 Smoke Removal Rate with pre-filter, extended HEPA filter and premium activated carbon, smoke purifier will perform efficiently with up to 99.98 air purification rate. Whisper Quiet Air Purifier with no more than 45dB noise rate, it ensures a quiet working environment,Actual measured power is 140.2w,The measured wind speed of the air inlet is 16.5ms36.96mph. User-friendly Workmanship a. Smart control panel remote control for versatile and complex environments.No need to bend under the table to switch or adjust the wind speed, remote control can be achieved. b. Timed setting based on working hours, eliminating the need for constant manual supervision and freeing up manpower. c. Intelligent clogging alarm system for filters, effectively predicting the replacement cycle of filters. d. Equipped with brake casters for easy mobility or stationary positioning.. Combination and Usage Scenario The smoke purifier can be used in conjunction with a laser machine enclosure to effectively purify toxic and harmful gases generated during laser marking, engraving, and cutting. It also allows you to enjoy the fun of DIY by observing the laser machines operation through the transparent window of the enclosure. Additionally, it can be used for enclosed 3D printing smoke treatment and purification.. Better service All our products have passed CE and FCC certifications. Our WalkCleaner engineers are available around the clock to provide problem-solving and services for you. In addition, if there are any quality issues, you can return or exchange the product at any time.. Note Remote control does not include battery, please bring CR2025 battery, sorry for the inconvenience.

SMOKE ABSORBER, wC1571, FA-430. FA430-KIT1 Smoke Absorber with C1571. Powerful suction. Quiet operation. 3-airflow adjustment modes High, Medium, Low.

Solder Smoke AbsorberFume RemoverSmoke Extractor Prevention Absorber DIY Working Fan for Soldering Station. 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.. Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.. Easy to replace filter, Includes one replacement filter. Working temperature -2060, Power consumption 120V, 30W 50 60Hz.. US based customer support, 30 days full satisfaction no question asked return period..

Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction.. A 24-inch flexible tube, Fume hood can adjust direction according to actual needs.. Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction 40W, 6000 RPM, 52CFM, Noise Level 55dbm, Life Expectancy 50,000 hours, Static pressure 125mmH2O.. Easy to replace the filter, Includes one replacement filter. Working temperature -2060, Power consumption 120V-240V, 40W 12V, 4A Power supply.. US-based customer support, 30 days full satisfaction no question asked return period..

ELIMINATES IRRITATING ODORS Featuring 3 Stage Filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.. HIGHLY VERSATILE The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning Pyrography, 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.. STRONG SUCTION WITH SLIGHT NOISE The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. You will experience fresh, focused, and devoted working surroundings with this solder fan.. UNUSUAL STORAGE SAVER The highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop.. TOP-NOTCH MATERIAL MUIN is working diligently in making expediting products so far. We ensure quality by using ABS material in the construction of this solder extractor fan. Click ADD TO CART and be ready to get a sturdy solder fumes extractor at your doorstep.

High-Efficient Absorb Optimized 3300 RPM high suction fan is low noise, Strong absorption, effectively absorb the toxic fumes, air purification.. Upgraded Design Pure copper motor.The enclosure is made from metal.4 non-slip heavy-duty rubber feet anchor the unit to the ground. A handy carrying handle allows you to move the unit easily.. Easy to replace the filter Includes two replacement filter.. ESD-Safe Design The solder smoke absorber is made of ESD-safe materials.. 100 Satisfaction Service Export products 100 quality inspection, all customers support 3 months of unconditional exchange or return policy and promise to provide a 3-year after-sales service..

ADVANCED 3-STAGE FILTRATION SYSTEM The KNOKOO fume extractor continuously captures soldering, laser smoke and lead fumes, directing them through a Pre-filter, H13 HEPA filter, and Activated Carbon filter to neutralize both particles and unpleasant odors. With its modular design, each layer can be replaced separately. This 3-stage structure offers a larger dust capacity and a longer service life than single-layer filters, making it significantly more cost-effective. 99.97 HIGH-EFFICIENCY PURIFICATION The KNOKOO 100W smoke extractor delivers a powerful airflow of 200 mh117 CFM while maintaining low energy consumption, thanks to its high-performance brushless DC motor. Smoke is filtered and output with a purification efficiency of up to 99.97, ensuring clean, fresh air. Breathe comfortably and protect your respiratory health with reliable, professional-grade filtration. Certified Multi-Use Air Purifier Our KNOKOO fume extractors undergo strict quality management and have obtained FCC, CE, RoHS, and MSDS certifications. This versatile system is ideal for soldering, 5W laser engraving, 3D printing, and nail salons. Note FES150S is ideal for light-duty tasks for Thick smoke and strong odor, heavy industrial use, choose our high-capacity models FES200KFES200FES350. ULTRA-QUIET INDUSTRIAL DURABILITY Engineered to 6Sigma quality standards, our soldering fume extractor supports 247 continuous operation. The heavy-duty brushless motor provides exceptional airflow while maintaining a quiet workshop environment at around 50dB in low speed. SMART CLOG ALERT DOUBLE PROTECTION The laser fume extractor monitors filter life via air pressure changes, triggering an audible beep when replacement is needed. Plus, a hidden emergency fuse box with two 2A fuses provides double electrical safety for worry-free operation. . , ..

HIGH-EFFICIENCY FILTRATION This fume extractor delivers high-efficiency filtration with a purification rate of 99.97, effectively capturing dust particles as small as 0.3m. It helps manage airborne contaminants during detailed work. As a practical smoke extractor, it supports a cleaner working environment by capturing fine particulate matter at its source.. THREE-LAYER FILTRATION SYSTEM Featuring a comprehensive fume extractor with filter design, the system includes one activated carbon main filter with 800-1000mgg iodine content, one HEPA filter, and 12 pre-filter cottons. This 3-stage structure offers increased dust-holding capacity compared to single-filter units, and the service life of the main filter is approximately 120 to 180 days under normal operating conditions. This extractor is built for sustained performance.. 250mh POWERFUL SUCTION Equipped with a 100W brushless motor, this solder fume extractor generates a strong airflow of 250mh for effective fume capture. Operates at a noise level below 55dB. The unit also functions reliably as a welding fume extractor for handling related fumes with consistent suction power.. VERSATILE APPLICATIONS Designed for hobbyists and professionals, this smoke extractor is suitable for use with a soldering iron, 3D printing, managing emissions from small laser devices, and serves as a nail dust collector. It includes two smoke hood shapes round and diamond for flexible placement. It is also an effective fume extractor for laser engraver in appropriate settings.. CERTIFICATION AND SUPPORT The fume extractor soldering complies with CE, ROSH and FCC standards. For any quality concerns, our dedicated technical team is on standby to assist with your Laser Fume Extractor.. Note New and old packaging will be shipped randomly. Quality features are exactly the same.

Designed for soldering enthusiasts FC-2001S fume extractor features a compact design with robust suction power airflow up to 128-168mh. Efficiently removes solder smoke, iron filings, dust, and captures 99.99 of fine particles. Ideal for compact workspaces and precision soldering tasks. 3-Stage Pro Filtration The FC-2001S solder fume extractor features a triple-layer systempre-filter, H12 HEPA filter, and high-iodine activated carbonto capture and neutralize 99.97 of contaminants for cleaner air. Pro-Grade High-Iodine Carbon The FC-2001S fume extractors core filter uses coconut shell activated carbon with 500-700mgg iodine content. Higher iodine value stronger purification going beyond tradition for cleaner, safer soldering environments. Surge-Resistant Technology The FC-2001S soldering fume extractor utilizes FumeClears innovative universal voltage design, seamlessly operating in both 110V and 220V environments for unmatched adaptability worldwide. No After-Sales Worries All of FumeClear products are CE and FCC certified. Our FumeClear engineers are available 247 to provide problem-solving services. Additionally, you can return or exchange the product at any time in case of any quality problems. All parameters of FC-2001S have been tested by experiments, if you are dissatisfied with the noise or one other parameter please contact us immediately, FumeClear will provide you with the perfect solution.

Powerful Suction Capability The FumeClear FC2002A fume extractor for laser engraver is capable of achieving a significant suction power of up to 260mh 153 CFM, effectively absorbing all exhaust gases, powders, wood chips, iron chips, etc. within a 15cm range near the hood head. Ideal for various operational scenarios such as 10-40W laser engraving machines, cutting machines, desktop soldering,3D Printing. 99.97 Purification Rate The FumeClear FC2002A fume extractor incorporates a 3-stage filtration system designed to capture large particles, smoke and dust below 0.3 microns. With its combination of pre-filter, Hepa filter and main carbon filter, the FC2002A achieves an outstanding purification rate of 99.97, providing you with clean, fresh air. keep your eyes and lungs free from pollution. Professional Grade High Lodine Filter The FC2002A fume extractor features a main carbon filter made of highly iodized coconut shell activated carbon that provides superior adsorption and purification capabilities compared to regular activated carbon. With a maximum service life of up to 4000 hours, depending on usage, this filter offers exceptional durability and value for money. Additionally, the FC2002A comes equipped with 10 replaceable pre-filters. Aerospace-Grade Noise Reduction Structure The FC2002A solder fume extractor features an aerospace-grade noise reduction design. It is painted with noise-reducing coating and encapsulates high-density sound-absorbing sponge at each interface of the structure. The maximum noise level produced is under 55db. Worry-Free After-Sales Service The FumeClear FC2002A is CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and an exchange or return policy in case of any quality issue.

Designed for High-Power Laser Cutting- The FumeClear FC2004 fume extractor is specially designed for laser engraving machines above 20W, and is highly effective in purifying up to 99.98 of harmful gases and filtering out dust and smoke impurities below 0.2 microns. Ideal for laser engraving, spraying, electroplating, and soldering.. Triple Filtration System 3 layers- The FumeClear FC2004 adopts a 3-layer filtration structure, with a pre-filter and a HEPA filter to effectively isolate most of the large particles in the air, followed by a main carbon filter that filters out harmful dust and smoke in the air below 0.2 microns. Keep your eyes and lungs free from pollution.. Professional-Grade High-Iodine Filter- The FC2004 main carbon filter is made with high-iodine coconut shell carbon, which is 2-3 times more effective in adsorbing and filtering soot below 0.2 microns than ordinary activated carbon, with a service life of over 4000 hours. The FC2004 is also equipped with 10 pre-filter cottons, making it a great value for your money.. Great Suction Power- With a suction power of up to 420mh, the FC2004 fume extractor easily absorbs all fine objects under the fume hood head, including exhaust gas, powder, iron filings, etc. It truly guards your health and keeps you away from pollution.. Worry-Free After-Sales Service- FumeClear FC2004 has been CE, FCC, ROHS, and UKCA certified. Additionally, the Fumeclear team provides 24-hour online technical support and a return or exchange policy in case of any quality problems..

Unrivaled PerformanceBuilt with a durable metal housing and a 100W brushless DC motor, this fume extractor delivers a stable 118 CFM 200 mh airflow. The soldering fume extractor HEPA activated carbon filtration system effectively captures harmful fumes and odors from soldering, laser engraving, and nail workhelping you maintain a cleaner and healthier indoor workspace.. HEPA Carbon 3-Stage FiltrationThis 3 stage solder fume extractor features a 3-stage filtration system with a pre-filter, HEPA filter, and ultra-dense carbon mesh iodine 1000 mgg. It captures 99.97 of harmful particles 0.3 m. The three filter layers are individually replaceable, and four extra pre-filters are included. Note For high-power lasers generating heavy smoke, a heavy-duty solder smoke purifier is recommended.. Ultra-Quiet OperationProtect your hearing and focus. Our solder smoke extractor combines an advanced brushless motor with high-density acoustic insulation, even at maximum power, noise levels stay as low as 55 dB. This smoke absorber ensures you stay focused on intricate soldering or DIY tasks. It is an essential tool for any indoor workshop requiring clean air and a peaceful atmosphere.. Compact Effortless MobilityDesigned for flexible workspaces, the XF180 mini hepa fume extractor features a space-saving 10.4 10.4 footprint that fits easily under desks or in tight corners. Equipped with four 360 swivel casters 2 lockable, laser fume extractor glides smoothly with a single touch. The heat-resistant 47 gooseneck hose offers 360 adjustment and stays firmly in placeensuring pinpoint smoke capture without sagging.. Safe and ReliableFUMEGO fume extractor soldering are certified by CE, FCC, and RoHS, meeting global safety and performance standards to guarantee reliable quality. If you don't know how to choose the welding fume extractor that best suits your needs, or have any after-sales problems, feel free to contact us at any time, our professional support team is always ready to assistproviding peace of mind..

- If you need after-sales support, please contact our customer service at the KNOKOO store via Amazon's internal message for help. we offer 24h7day online service on a week. VERSATILE MULTI-FIELD APPLICATIONS The KNOKOO fume extractor is a professional-grade solution for a non-toxic workspace. From Xtool, Glowforge, and OMTech accessories to CNC router projects and plasma cutting, it provides elite ventilation for wood, acrylic, leather, and epoxy resin. It is equally essential for medical aesthetics, acting as a smoke evacuator for laser hair removal, microblading, tattoo sessions, and beauty clinic procedures. Certified by FCC, CE, ROHS, and MSDS for guaranteed safety. 99.97 HIGH-EFFICIENCY PURIFICATION Equipped with a high-power brushless DC motor, this unit delivers a massive 310-330 mh air volume with whisper-quiet operation. The H13 HEPA filter and exhaust fan system instantly capture fine PM0.3m particles, dust, and lead mist. Whether you need a nail dust collector for a manicure ventilation system or a plume extractor for industrial flux and rosin soldering, our purificador de aire ensures medical-grade air quality. MAXIMUM ODOR ADSORPTION 5 LBS ACTIVATED CARBON Don't just mask smellseliminate them. Packed with 5 lbs of high-iodine activated carbon, our system offers a vastly superior surface area compared to thin sheets. This heavy-duty odor eliminator for salons and workshops aggressively captures microscopic gas molecules and harmful fumes. It is the ultimate salon air purifier for neutralizing lash glue odor, eyelash extension fumes, and chemical smells, recirculating only clean, scent-free air. Advanced 3-Stage Filtration System Engineered for longevity, our professional fume extractor features a multi-layer structure Pre-filter, HEPA filter, and activated carbon. This design offers a larger dust collector capacity than single-layer cores, extending filter life and reducing costs. Perfect as a nail table dust remover or quiet smoke absorber, each layer can be replaced independently to keep your spa or beauty clinic equipment running efficiently. INTELLIGENT FILTER DETECTION MONITORING Maintain an optimal clean air environment with our smart pressure-monitoring system. The machine continuously tracks the filters lifespan and detects clogging in real-time. If the system detects a blockage, an intelligent audible alert sounds, letting you know its time to swap your extractor de humo filters. This ensures your ventilation stays powerful and your workspace remains protected from smell and airborne contaminants. WHISPER-QUIET PORTABLE DESIGN Engineered for mobility, the machine features 4 wear-resistant silent caster wheels at the base. These 360 swivel wheels allow you to move the unit effortlessly between workstations without scratching your floors.

CERTIFIED QUALITY WIDE APPLICATION Fully compliant with FCC, CE, RoHS, and MSDS standards, our KNOKOO fume extractor ensures professional-grade safety. It is the ultimate solution for smoke and harmful gas filtration across various industries, including large-scale soldering, laser engravingcutting, wood etching, 3D printing, and laser beauty treatments such as laser freckle and mole removal.Built for 247 continuous operation, it's the reliable choice for professional workshops and busy salons. ULTIMATE 4-STAGE FILTRATION 99.97 PURIFICATION Experience professional-grade air cleaning with our advanced 4-layer structure. Unlike standard filters, this system effectively neutralizes 99.9 of VOCs, harmful chemical fumes, and stubborn odors from laser engraving, welding, and salon treatments, ensuring a safe and breathable workspace. MAXIMUM ODOR ADSORPTION-7.7LBS ACTIVATED CARBON Packed with a massive 3.5KG 7.7 lbs of high-iodine activated carbon, our dual-layer carbon filters offer a significantly larger surface area than thin carbon sheets. This heavy-duty design ensures deep purification, capturing microscopic gas molecules and recirculating only clean, scent-free air. POWERFUL 350W SUCTION 247 CFM AIRFLOW Driven by a high-performance 350W brushless DC motor, this extractor delivers a massive airflow of 420 mh 247 CFM. It creates constant negative pressure to instantly capture heavy soldering smoke, laser fumes, and pungent odors at the sourcebefore they reach your breathing zone. LCD DISPLAY REMOTE CONTROL Stay in full control with the integrated LCD digital screen, which provides real-time monitoring of your machine's status. For added convenience, the included wireless remote control allows you to adjust wind speed and settings from a distance, ensuring a seamless and uninterrupted workflow in busy workshops or salons. WHISPER-QUIET PORTABLE DESIGN Engineered for mobility, the machine features 4 wear-resistant silent caster wheels at the base. These 360 swivel wheels allow you to move the unit effortlessly between workstations without scratching your floors. . , .. - If you need after-sales support, please contact our customer service at the KNOKOO store via Amazon's internal message for help. we offer 24h7day online service on a week.

A- S If you need after-sales support, please contact our customer service at the KNOKOO store via Amazon's internal message for help. We promise that quality problems occur during the validity period, we provide return and exchange service, spare parts motherboard, motor, motor replacement service excluding filters and other wearing parts. Certified Quality and Wide Application KNOKOO fume extractor implements strict quality management and has obtained certifications such as FCC, CE, ROHS and MSDS. It can be applied for smoke purification in fields such as medical aesthetics, laser freckle removal, laser mole removal, laser engraving, laser cutting, wood art, smoke absorption and purification as well as harmful gas filtration in large-scale soldering work fields, and odor removal. Advanced Large area 3-layer Filtration System Experience professional-grade air cleaning with our advanced 3-layer structure. Unlike standard filters, this system effectively neutralizes 99.9 of VOCs, harmful chemical fumes, and stubborn odors from laser engraving, welding, and salon treatments, ensuring a safe and breathable workspace. LCD DISPLAY REMOTE CONTROL Stay in full control with the integrated LCD digital screen, which provides real-time monitoring of your machine's status. For added convenience, the included wireless remote control allows you to adjust wind speed and settings from a distance, ensuring a seamless and uninterrupted workflow in busy workshops or salons. WHISPER-QUIET PORTABLE DESIGN Engineered for mobility, the machine features 4 wear-resistant silent caster wheels at the base. These 360 swivel wheels allow you to move the unit effortlessly between workstations without scratching your floors. Medical-Grade H13 HEPA-99.97 Purification 210 Watts High-power brushless DC motor to provide large air volume while keep low noise. powerful suction instantly captures fumes and particles. H13 HEPA and high iodine activated carbon filter can Efficiently captures fine PM0.3m particles, removes harmful gases and odors, with a purification efficiency of up to 99.97.

Solder Fume ExtractorSmoke TrapSmoke EaterSmoke FilterSolder Sucker Prevention Absorber DIY Working Extractor Fan for Solder Station.. 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room.. Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to the ground. Handy carrying handle allows you to move the unit easily.. Easy to replace filter, Includes one smoke trap replacement filter. Working temperature -2060, Power consumption 120V, 30W 50 60Hz.. US based customer support, 30 days full satisfaction no question asked return period..

. Within the 100W class, most Fume Extractor focus on the basics. This Solder Fume Extractor raises the baroffering 99.97 purification through a multi-stage system, stable high-speed suction performance, and core safety features like sealed construction and fuse protection. All essential functions, fully equipped, at an unmatched price point. , Powered KQZ proprietary VortexForce system, the Fume Extractor Soldering delivers concentrated airflow with reduced turbulence, maintaining consistent suction performance across all speed levels. Compared to standard brushless motors in similar 100W units, airflow stability is improved by up to 40, ensuring cleaner extraction and more reliable operation in demanding workflows. , The Laser Fume Extractor features an integrated 2-in-1 filter combining H13 HEPA and high-iodine activated carbon, with carbon making up 70 of the filters total weight. This compact dual-layer design enhances adsorption of VOCs, odors, and harmful gases while reducing airflow resistance. Unlike traditional 3-layer filters, it improves purification efficiency and truly achieves 99.97 filtration performance. - Optimized for multi-scene use, this Smoke Extractor supports laser cutting, 3D printing, soldering, and DTF workflows. Its compact footprint integrates easily into tight workstations, while low-noise operation maintains a quieter working environmentideal for workshops, makerspaces, and electronics labs. ?? ? Backed by years of experience in air purification technology, KQZ is committed to delivering cost-effective solutions for creators and industrial users. Whether you have questions about model selection or need post-sale assistance, our team is ready to provide knowledgeable support throughout your journey.

- The KQZ W1 Fume Extractor can transform your workspace entirely It features a high-efficiency centrifugal motor and 168 mh air volume. Powerful suction instantly captures fumes and particles. H13 HEPA filter layer is fully covered with coal-based activated carbon, ensuring comprehensive and in-depth purification of odors and fine dust particles. This significantly reduces physical discomfort caused by unpleasant odors and smoke. . - ? The Solder Fume Extractor combines a 9mm pre-filter and H13 HEPA coal-based activated carbon premium filter cartridge. This pair works in perfect coordination to capture 99.99 of all airborne pollutants. Whether it's smoke particles or other heavy metals such as Pb, Hg, As. This design not only enables high-efficiency purification and offers cost-effectiveness, but also extends the overall lifespan of the filter. KQZ Soldering Fume Extractor is using advanced inverter technology to support a wide voltage range of 110V to 220V to ensure stable operation. Powerful extraction is achieved with just 1 button. This device is ideal for eliminating smoke and dust. It is especially suitable for 3D printing studios as well as welding and soldering workplaces. It can effectively remove harmful gases, ensuring a safer and healthier working environment. KQZ W1 Welding Fume Extractor is mini in design, space-saving and easy to carry. Its 66mm swan neck hose can be adjusted 360 for various working angles. The air outlet can accurately capture soldering fumes for fast purification. It is made of aviation-grade metal alloy and it's a high-strength, corrosion-resistant alloy that offers unparalleled durability and stability. KQZ W1 can solve all problems with a Smoke Absorber and keep your workbench clean. The Fume Extractor Soldering's package contents 1Fume Extractor, 5 Pre-Filter, 1 Efficiency Filter, 1Tube, 1Hood, 1Power Cable, 1User Manual. KQZ customer clothing company 247 wire support, Quick solution to solve the problem after selecting the puzzle. Our basic setting is to use the recommended model and the layout, providing the answer to the customer. Choose KQZ, enjoy professional services and quality products.

Smart Solutions for fume ControlThe LESSFUME LF105 is a solderinglaser fume extractor suitable for most businesses and home users. With a maximum negative pressure of 2300Pa and an impressive airflow of 130 CFM, it effectively filters dust particles smaller than 0.3 microns and absorbs light odors. Note The LF105 is not suitable for exhausting fumes from large laser engravers exceeding 10W. For such applications, please select the LF106 fume extractor. 4-Layer Filtration - Peak EfficiencyCompared to traditional fume extractors, LESSFUME employs a 4-layer filtration system including a pre-filter, H13 HEPA filter, and high-efficiency 2-in-1 activated carbon filter. This eliminates 99.97 of harmful gases and impurities during soldering. The LF105 comes with a 5-layer primary filter, and you can also purchase the15-layer filter package. High-Performance Brushless MotorOur brushless DC fan offers speed control, delivering stronger suction and higher negative pressure than comparable products. With a maximum no-load power of 105W and airflow up to 220mh, it operates below 55dB. It effort captures all fine particles near the hood, including exhaust fumes, powders. High Iodine Value Coconut Shell Activated Carbon FilterThe primary carbon filter in LESSFUME range hoods is composed of high-iodine activated carbon with an iodine value of 800-1000mgg. This delivers superior adsorption and purification performance compared to standard activated carbon, along with extended service life. About Us Brand WarrantyLESSFUME fume extractors are certified by CE, FCC, and RoHS, meeting safety and performance standards. All filter components are replaceable individually. For any inquiries, please contact us anytime. Our professional customer service team provides round-the-clock assistance.

M-T Professionaltrial Fume ExtractorDesigned for versatility, M-T 309 solder fume extractor is Applicable to most laser engraving machines, closed laser engraving machines, laser protective covers, closed 3D printers, 3D printer insulation covers, light-curing printers, etc. on the market, and can also be used in nails beauty, moxibustion beauty, manual soldering.. Breathe Safe While SolderingBreathe safely while soldering with the M-T 309 Fume Extractor Its sturdy metal housing and powerful 26,000 RPM motor deliver 243mh airflow while operating under 60dB. Quietly captures harmful fumes within 15 inches.. H13 4-Stage Filtration M-T 309 fume extractor delivers superior air purification with its H13 quad-layer filtration High-Density Pre-Filter, Carbon Cotton, True HEPA, Activated Carbon. Removes 99.99 of dust, bacteria, and toxic fumes chlorineleadmercury.. Compact Portable Fume ExtractorFeaturing a durable laser-welded metal casing 10x10x8 for enhanced stability, quiet operation, and efficient cooling. At just 20 lbs with 4 smooth-rolling casters, this space-saving smoke absorber moves effortlessly between workstations - ideal for soldering benches and DIY projects.. Quality Assurance Exceptional SupportEvery export product undergoes 100 quality inspection to ensure top-notch performance. Backed by a 3-year after-sales service, M-T is dedicated to delivering considerate support, professional-grade equipment, and exceptional value for money. Your trust drives our commitment to excellence..

ELIMINATES IRRITATING ODORS Featuring 3 Stage Filter, the fume extractor effectively absorbs and seizes fumes from solder, flux, chemicals, gases, and ease to overcome disturbing odors in your working spaces.. HIGHLY VERSATILE The high versatility of this fume extractor soldering fan enables you to stay relaxed and concentrated throughout Soldering, Wood-Burning Pyrography, 3D Printing, Stained Glass, and Crafting, Nail Salons, Woodworking, Jewelry Making, and Smoking.. STRONG SUCTION WITH SLIGHT NOISE The predominantly optimized soldering fan empowers you to remove fumes even 4-5 Inches away with minor noise. You will experience fresh, focused, and devoted working surroundings with this solder fan.. UNUSUAL STORAGE SAVER The highly compatible design of this solder filter heightens its portability, allowing it to take a minimum space to avoid cluttering on your desktop.. TOP-NOTCH MATERIAL MUIN is working diligently in making expediting products so far. We ensure quality by using ABS material in the construction of this solder extractor fan. Click ADD TO CART and be ready to get a sturdy solder fumes extractor at your doorstep.

A Game-Changer for Smoke-Free WorkspacesSoldering PCB smoke in your face, resin odors you can't share a room with, cheap extractors that are weak and loudI know how frustrating that is. NTP1 Fume Extractor uses ? , ? , from your breathing zone. fits perfectly beside your bench for cleaner, easiertobreathe work. How the Filtration Works Equipped with a brushless motor, this Soldering Fume Extractor delivers of airflow and pushes smoke through a multi-layer filtration system. The pre-filter captures larger particles first the filter then removes . particles that are almost invisible to the eye finally, high-iodine activated carbon helps reduce harsh VOCs, chemical odorsso you can work without constantly breathing them in. Premium Materials Equipped with new-gen control chip that monitors current in real time and includes a replaceable 3A fuse for safer and more stable operation. A 10mm pre-filter captures larger particles first to help extend the life of the main filter. The true H13 HEPA filter is made from ?- - ?. Also includes 1000mgg high-iodine activated carbon with a honeycomb structure to absorb odors more effectively. Low Noise Maintenance This Soldering Fume Extractor operate at a low noise level that wont disturb conversations or concentration during work. It uses and also includes -, In a normal soldering work environment, the replacement frequency is usually lower, helping reduce long-term costsActual replacement intervals may vary depending on usage conditions. Compact Design Versatile Applications This smoke extractor measures only . . ., so it wont take up too much space on your workbench. The . flexible tube can be adjusted 360 to position the suction point exactly where the smoke is generated. Perfect for soldering, laser engraving, resin and ABS 3D printing, electronics repair, nail salons, beauty studios, stained glass work, dental labs, pyrography, and other small workshop. Every NEETOP product is built for long-term use and backed by reliable warranty support for warranty activation details, please contact our customer support team. Our professional technical team is always on standby to provide one-on-one assistance whenever you need help with installation, filter replacement, or product setup. If you ever have a question, simply reach out to uswell make sure you get the support you need and a worry-free experience from day one.

High-Powered Suction, Breathing FreelyThe laser fume extractor features a robust 105W high-performance motor that generates an impressive airflow of 260mh and can achieve wind speeds up to 13ms. Fume extractor effectively clears harmful fumes and particles. Ideal for soldering, laser engraving , 3D printing, nail salons, and DTF printing. Note YC100 Fume extractor is not for high-power laser engravers over 10W. For those, consider YC200.. Smart Control Clog AlertsThis welding fume extractor features an advanced LED display showing real-time airflow for precise speed adjustment. Includes timer and remote control functions. This upgraded model is smarter and easier to use than basic knob versions. Above all, the solder smoke extractor will triggers a red alert when the filter reaches its capacity, This reminds you to replace it, protecting the motor and extending the machine's life.. Industrial 3Layer Filtration Save 40 on Filter Changes The soldering fume extractor uses a 3layer filter prefilter ultradense H12 HEPA 1200g highiodine activated carbon. Together, it removes 99 of particles 0.3m. Ultradense HEPA holds 2x the dust of standard filters. The 1200g activated carbon provides 23x longer gas adsorption life compared to typical 300500g carbon filters. Only 12 changes a year stop worrying about frequent replacements, and save 40 on filter costs.. Low-Noise Operation, Zero Focus InterruptionBased on the ISO 37442010 acoustic standard test, this fume extractor for laser cutter generates noise below 53 dB, which is 30 lower than that of traditional dtf fume extractor equipment 65-75 dBA. Ideal for the laboratory or electronic welding workshop, it can help you stay focused and reduce operational errors.. Professional-Grade ConstructionMade from sturdy metal materials, this fume extractor for soldering is built to last while occupying minimal space.Self-contained operation requires no external exhaust - clean air discharges through base vent. With side handles for easy transport and operation, this device complies with FCCCEPSE certifications, ensuring a reliable solution for your air purification needs in various settings, including as a fume extractor hepa or laser smoke extractor.. After-Sales Service If you have any questions, please feel free to contact us at any time. Our professional customer service team is available 247 to assist you. If there are any quality issues with the soldering fume extractor, we will also provide a complete return and exchange service process..

High-Efficient Soldering Fume Extractor Our fume extractor are equipped with a high-performance fan that effectively captures and removes welding fumes, keeping your workspace clean and safe, and ensuring you have a clear view of your work. Say goodbye to annoying fumes and hello to a healthier welding environment. Powerful Solder Fume Extractor Our 12V solder smoke fan features a pure copper motor that provides powerful suction to draw in smoke and other harmful particles. The motor has a high-speed rotation of 2800 rpm, which generates a strong airflow that helps to purify the air quickly. NOTE The best gas absorption range of the filter is within 5inches.. Low Noise Solder Smoke Absorber The soldering fan is designed to operate with low noise, so it won't disturb the user or others in the room. Despite its quiet operation, the smoking instrument is highly effective at purifying the air and reducing harmful smoke. The strong suction power ensures that even the smallest particles are captured and filtered out, leaving the air clean and fresh.. 5PCS Carbon Filters We offer 5pcs filters. The 5pcs easily replaceable filters give you good and timely smoke prevention filter supplements. The replacement filters are easy to install. This makes the solder fume extractor a cost-effective choice, as you won't need to replace the entire unit when the filters become dirty.. Upgrade Casing Design The soldering fan casing is made of high-quality metal that is resistant to wear and tear, making it suitable for long-term use. Making it an ideal choice for those who want a smoke absorber that will last for years. 4pcs non-slip rubber pads hold the smoke absorber stable on a horizontal surface to prevent movement.. 100 Satisfaction Service Export products 100 quality inspection, all customers support 1-year after-sales service. If you encounter any problem, please find us in time, we will do our best to solve the issues for you..

100W Powerful Suction Powered by a strong 100W motor, this VEVOR solder fume extractor delivers up to 240 mh airflow, effectively capturing solder smoke and fumeshelping create a cleaner, more efficient, and more comfortable soldering environment.. Highly Efficient Filtration Featuring a 3-layer filtration system, our soldering smoke extractor captures 99.99 of harmful fumes and tiny impurities. No smoke in your face, so you can stay focused and work more efficiently.. Smart Filter Alert No more guessing when to replace the filter With a filter life of up to 10,000 hours, you won't be changing it frequently. And when it's time for a change, a friendly beep will let you know. Less hassle, more convenience. Peaceful Operation Our welding fume purifier operates at 70dB low noise, ensuring a quiet and comfortable working environment. Its 47.2-inch flexible hose adds much convenience by adjusting to any angle you need.. Compact and Moveable The 10.4 x 10.4 x 13.2 compact size is perfect for small soldering setups and DIY projects, both space-saving and portable. 4 quality swivel casters 2 lockable make the soldering smoke absorber glide smoothly.. PLEASE NOTE Our solder fume extractor is mainly designed for soldering, it is only suitable for the smoke generated by small-scale laser painting, and the best working effect is within a distance of 20cm. To ensure the working effect, it is recommended to replace the filter every 3-6 months..

Efficient Suction Power Equipped with a 43W brushless motor, this solder fume extractor delivers strong suction of up to 180 mh. It effectively captures solder smoke, fine particles, and dust, making your soldering tasks more comfortable. 3-Stage Filtration System Built with a triple-layer filtration system - primary quartz cotton H11 filter activated carbon cloth 2-in-1 filter, VEVOR soldering smoke absorber efficiently traps particles and soldering smoke for cleaner air Filter comes pre-installed replacement filters can be purchased as needed. Adjustable Suction, Easy Control Three airflow levels - up to 180 mh. Easily adjust the suction to match different soldering tasks and smoke levels, ensuring smoother, more stable, and more efficient operation. 360 Flexible Fume Hose The 1.8ft exhaust pipe can rotate 360 for flexible adjustment of angles and directions to suit different work positions. Paired with the large exhaust hood to capture and direct fumes away more precisely and efficiently. Compact Sturdy Our fume absorber extractor features a metal body for enhanced durability, and four anti-slip rubber feet keep it stable on your desktop. The compact design makes it easy to carry or store ideal for home studios and DIY workspaces.

Twice as Effective WEP 948DQ-I fume extractor comes with filtration adsorbers both on the front and the rear to provide double filtering, adsorbing the harmful particles in the air generated from soldering.. Adjustable Tilt Angle You can adjust the tilt angle to provide better suction coverage for your soldering area. Our solder fume extractor gives effective suction to your work area from 10cm away, and our extractor fan is built with longer service lifespan to provide better durability.. Dimensions Comes in 3.5 x 5.7 x 6.5 inches compact size with built-in power switch, you can switch the extraction function ON and OFF easily. Suitable for users with work conditions that generates fume.. Assistive Tools Comes with attachable helping hands 11.8in30cm to help secure components, circuit board, wires when soldering. Also equipped with side fenders to reduce the negative impact of disruptive airflows when extracting fume from soldering.. This Fume Extractor is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket..

Essential Information - YIHUA 948DQ-I comes with 8 filtration adsorbers, 2 fenders and 1 tiltable stand for the Solder fume extractor. This product can adsorb harmful fumes generated from soldering or wood burning, effectively cleansing the air in your workplace, ensuring safety and working efficiency. Dual-filtering Function - High-quality filtration adsorbers at the front and rear help effectively filter the harmful particles and reduce odors from the fumes. Tiltable stand Fenders - This fume extractor comes with a 30-tiltable stand, allowing customers to adjust effective filtering areas according to needs. Fenders on both sides can help reduce disruptive airflows and ensure effective fume extraction. Fumes generated within the straight-line distance of 10 cm can be adsorbed effectively. Longer Operating Lifespan - YIHUA 948DQ-Is 5-blade fan can extract fume effectively with longer operating lifespan and relatively lower noise level. In the Box 1 948DQ-I Fume Extractor, 8 Filtration Adsorbers Front Rear, 2 Fenders, 1 Tiltable Stand. Choose YIHUA with Confidence Enjoy our 12-month US- exclusive manufacturer technical coverage and 247 professional assistance on Amazon. Note This model is designed to operate on 110-127V with a US-standard power plug.

YIHUA 948DQ-III 2-In-1 station is designated to save your desk space by integrating a fume extractor and a 110W high-power soldering iron into one. The station comes with LED Nixie Display, X-2 Soldering Iron Holder, and Helping Hand. The soldering iron is 110W high-power and features with PID Temperature Stabilization, Sleep Mode, Auto Shutdown, CF Conversion, and Digital Temperature Calibration.. The fume extractor comes with double filtering, with filtration adsorbers fitted in both the front and the rear of the unit. The stands tilt angle is adjustable, and the unit comes with attachment points for helping hands. This smoke absorber can adsorb the harmful particles inside the fume generated from soldering, wood burning, and other types of crafting work.. The units fender design helps block disruptive airflow around the fume extractor and increases the effective fume extraction area. The fan can extract fumes generated within 10cm 3.9inches, 10 away from the fume extractor effective distance measured directly from the front. The attachable helping hands 30cm11.8 inches, 10 can help you secure the PCB, wires, or other objects when soldering, freeing your hand to focus on soldering.. The soldering station's temperature is adjustable from 392896F, with a precision PID program stabilizing the actual temperature every in milliseconds. The solder station comes with a 10-minute sleep mode that activates when the soldering iron is not in use for longer than 10 minutes, extending the lifespan of the soldering tips and the heating element. This soldering station uses the YIHUA 1400 soldering tip.. Choose YIHUA with Confidence Enjoy our 12-month US- exclusive manufacturer technical coverage and 247 professional assistance on Amazon. Note This model is designed to operate on 110-127V with a US-standard power plug..

Upgraded Adjustable Speed KnobThe NOEVSBIG fume extractor features an upgraded adjustable speed knob, allowing for precise control with speeds up to 3300 RPM. This ensures optimal suction power tailored to your needs, making it perfect for various tasks like soldering, stained glass work, laser engraving, and DIY projects.. Powerful Suction with Pure Copper FanEquipped with a large 15050 pure copper fan diameter 150150mm, thickness 50mm, the NOEVSBIG fume extractor delivers 30 more power compared to models with 12050 fans. This provides superior suction to effectively remove fumes and smoke, ensuring a clean and safe workspace.. 4 Easy-to-Replace FiltersThe fume extractor comes with 4 additional filters that are easy to replace, ensuring prolonged use and consistent performance. These high-efficiency 0.4-inch thick filters trap harmful particles and fumes, effectively removing solder, flux, chemicals, gases, and other hazardous substances from soldering smoke. The filters further purify the air through an activated carbon layer, making it ideal for continuous use in soldering and other applications, while eliminating irritating odors in your workspace.. Multi-Function for Various ScenariosThe NOEVSBIG fume extractor is designed for versatility, suitable for soldering, stained glass work, laser engraving, electronics repair, and other DIY projects. Its multifunctional design ensures that it meets the demands of various tasks, providing a cleaner and healthier workspace. What You Get1fume extractor4 fan filters and 1manual.. Easy to replace the filterIncludes 4 replacement filters.. ESD-Safe Design The solder smoke absorber is made of ESD-safe materials..

99.97 PURIFICATION RATE - The 80W DC motor of BAOSHISHAN fume extractor creates a powerful 106 CFM airflow to exhaust and purify air, high purification rate allow you to breathe fresh air again. Suitable for small solder station and home DIY, 10.5x10.5x16 inch bulk can be stuffed under the table and wont hinder your leg free.. 3-STAGE FILTER - Fume extractor has 3 stage filter. Cotton filter, central H-E-P-A filter and activated carbon filter absorb all smoke, dust and harmful gases at work. The upwind diversion design allows harmful particles and gases to contact the filter cotton and activated carbon filter material more fully and evenly, thereby making the filter element more efficient. Truly no emissions.. FLEXIBLE AND MOVBEABLE - The suction pipe is composed of many shortened pipes and each interface can be bent freely, greatly improving the adjustment angle. There are four quality universal wheels with buckles at the bottom of the machine, which is convenient to move and fix at any station.. HIGHLY SEALED STRUCTURE - Our metal latches very tightly closed the main filter bulk, completely seal the fumes during operation to prevent any leak. Each inner connecting section of the suction pipe has fine convex points, greatly enhance the stability and sealing of the pipeline, can be bent and fixed at any angle at will.. QUIET PROFESSIONAL SOLDER FUME EXTRACTOR - Strong suction power while the noise is as low as running computer. Effectively filter the smoke, dust, harmful gases produced by soldering and directly discharge into the air without external pipes. Even in a closed environment, it does not affect the indoor air quality. If you have any questions, please contact us alismile2014 and the host is hotmail. We will solve problems for you within 24 hours..

INDUSTRIAL FUME EXTRACTOR The powerful 80W DC motor on OMTech's industrial-strength XF-180 fume extractor creates a powerful 106 cu. ft.min. airflow to pull in exhaust and purify air during any project from laser engraving to welding, soldering to machining the provided 2.6 to 4 adapter lets this fume extractor connect to 40W OMTech cutting and engraving machines. 3-STAGE FILTER Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, its central HEPA filter, and its inner activated charcoal filter to absorb all your work's harmful gases and unpleasant odors. HIGHLY MOBILE The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it. INTUITIVE CONTROL At a press of the button, you can easily adjust this purifier's air flow among three modes to match your needs. SATISFACTION GUARANTEED OMTech backs this fume extractor with our usual strong warranty and friendly 247 customer service, ensuring that you'll enjoy its use for years to come.

DUAL-INTAKE FUME EXTRACTOR The 130W DC motor on OMTech's industrial-strength XF-250 fume extractor creates a powerful 73.6 cu. ft.min. airflow through both of its tubes to pull in exhaust and purify air during any project from laser engraving to welding, soldering to machining the provided 2.6 to 4 adapter lets this fume extractor connect to 40W OMTech cutting and engraving machines. 3-STAGE FILTER Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter, its central HEPA filter, and its inner activated charcoal filter to absorb all your work's harmful gases and unpleasant odors. HIGHLY MOBILE The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly in place once you're ready to go the hermetically-sealed extraction tube easily folds and fixes at the perfect angle wherever you need it. INTUITIVE CONTROL At a press of the button, you can easily adjust this purifier's air flow among three modes to match your needs our extraction tubes and hoods will powerfully purify the exhaust from two of your devices at the same time. SATISFACTION GUARANTEED OMTech backs this fume extractor with our usual strong warranty and friendly 247 customer service, ensuring that you'll enjoy its use for years to come.

Solder Smoke AbsorberFume RemoverSmoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.. It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter piece is convenient and quick.. Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours.. Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption properties.. It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..

Remove Smoke, sodering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick,safe and efficiently. Solder smoke fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place.. Adjustable tilt for more direct solder smoke absorption from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained.. Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations.. Onoff button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters..