Include 12PCS plastic colorful tube, 12PCS black caps and 12PCS red caps. The colorful plastic tube is durable and light-weight. Suitable for Quadcopter, FPV Racing Drone receiver antenna. Effectively protects the antenna from damage when crashing. The tube with 2mm inner diameter and 150mm length is suitable for all receiver antenna.

Ergonomic and compact design Haptic vibration alerts and voice speech outputs. Open source operating system Installed with ACCESS protocol. High-speed module digital interface. Supports spectrum analyzer function wired training function. Easily accessible battery compartment Batteries not included, adaptive with replaceable 18650 Li-ion batteries.

Built-in TD-ISRM RS Dual-Band Internal RF Module 900M2.4G Dual Band TD Mode Dual 2.4G TW Mode ACCESS 2.4G ACCESS R9 Modes 2.4G ACCST D16 Mode Further Improvements for Form Factor Design Super Low-Latency and Long-Range Control with Telemetry Upgraded Robust Antenna Handle. 900M2.4G External Antenna Connectors LoRa mode 800480 Resolution Outdoor High Brightness Touchscreen 2 Angle Adjustable Slider Levers 2 Knobs, 4 Standard Trims with 2 Extra Trims 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear All Knobs, Trims, and Central Linear-Slider with All-CNC Metal Caps Built-in 8GB Flash Drive Storage. Text to Speech TTS Function Digital Audio Power Amplifier Built-in 6-axis Gyroscope Sensor High-Speed PARA Wireless Training System Data Transmission Recharge System via USB Type-C Interface. Haptic Vibration Alerts and Voice Speech Outputs MC20R All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing Dual-side stick haptic feedback LeftRight can do vibration independently. Easy Travel-adjustable with any desired degree from 45 to 60 8 rotatable panel.

DUAL 2.4G RADIO SYSTEM The TWIN X14 stands out as a robust radio system, boasting the capability of utilizing dual 2.4G frequencies simultaneously on the same receiver in TW mode. Different from standard active-standby redundancy solutions, the TW active-active protocol ensures both 2.4G frequency bands are actively engaged on the TWIN series RF module and receiver simultaneously. DUAL INTERNAL RF ANTENNAS Equipped with two internal 2.4G RF antennas, the TWIN X14 offers expansive multi-directional coverage for transmitting signals with enhanced reliability and performance. HIGH-SPEED LOW-LATENCY PERFORMANCE Leveraging dual frequency attributes alongside the exterior antenna mounting frame, the Twin system provides less latency, higher reliability, and faster data rates for professional RC control. MULTIPLE PROTOCOL COMPATIBILITY In addition to the TW mode, TWIN X14 also supports ACCST D16 and ACCESS modes, providing users with a wide range of compatible receiver options to choose from when building RC models. 24-CHANNEL TRANSMITTER SYSTEM Features a comprehensive 24-channel configuration allowing for extensive control options and flexibility in managing complex RC aircraft and drone setups.

The Standard 2.4Ghz 10-Channel FS-iA10B Receiver for RC car and boat. Compatible with FS 2.4Ghz Surface Transmitter, very easy to bind. Ultra-small and light, save the car space, reduce vehicle load.. 10 channels meet your different needs. iA10B support PWM,PPM,I.BUS and S.BUS, but when fs-i6 with ia10b is not support S.BUS.. Made of high quality material..

The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released.Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size.. You can upgrade firmware by WIFI .Base on PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2. The RF module of EP1EP2 is the same like PP RX and use ESP8285 MCU .. Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV. Ultra light and Nano size, very suitable for Tiny whoop.. Type ISM,ESP8285 MCU,SX1280IMLTRT RF Module,Omnidirectional antenna,Frequency Range 2400 MHz to 2500 MHz,Maximum receive refresh rate 500Hz ,Minimum receiver refresh rate 25Hz,Working voltage 5v,Weight 0.42gramwithout antenna,Dimension 10mm10mm6mm Peak gain 2.23dB.

Exclusive Battleship Grey AW Edition The Aviation World AW Battleship Grey edition features a premium CNC-machined metal shell with a sophisticated matte finish. Inspired by modern naval and aviation aesthetics, this low-profile yet powerful color choice offers an anti-glare surface and a professional, heavy-duty feel that resonates with elite RC pilots..

Hardware Enhanced ergonomic designed case with comfortable rounded hand grips 4 Standard Trims with additional 2 extra trims Integrate flash storage but also keep the internal TF card slot Easy-to-reach top switches and sliders With a flat base to improve stability when standing the radio Color Touch-Screen Displays. High-Precision Hall-Sensor Gimbals with a Metal Panel 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear Lite Type External Module Bay Haptic Vibration Alerts and Voice Speech Outputs Supports Recharge System for 2S Li-ion Battery USB Type-C Interface High-speed PARA Wireless Training System. TD-ISRM RF Module Built-in TD 900M2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16 Mode Compatible with ACCST Receivers with D16 V2 or later FW 2.4GACCESS Mode Compatible with ACCESS Receivers 900M ACCESS Mode Compatible with ACCESS R9 868915MHz Receivers Capable of simultaneous working under ACCESS mode. 2.4G 900M TD Mode Compatible with TD Receivers Long-range control and super-low latency with telemetry. ETHOS System Clear and Intuitive UI Design Supports Dual Operation Modes of Radio Display Touch and Non-Touch Supports Multi-Language Switching HardwareSoftware Version and Factory Version Detection Supports running LUA Scripts.

Easy to bind and very fast link-up, quick and extremely stable in performance.This is an accessory product for Traxxas HPS HPI RC Car Boat. If any question, please tell us without hesitation. Ultra-small size and ultra-light weight, effectively save space and reduce item's weight-bearing. Buillt-in gyroscope features automatic recovery of unexpected offsets, suitable for AFHDS2A system transmitter. Compatible with Flysky GT5 GT2E GT2G FS-i4X FS-i6 FS-i6X FS-i6S FS-TH9A FS-TM10, not compatible FS-GT2 FS-GT2B FS-GT3B FS-GT3C and other transmitter whose communication protocol is AFHDS, Only compatible with the transmitter with the communication protocol AFHDS 2A.. Note If you encounter the problem of not being able to link for the first time, please choose to re-link. Steps Insert the attached code line into the receiver BIND interface and power on the receiver. At this time, the receiver indicator flashes quickly, then press BIND button of the transmitter, and turn on the power of the transmitter at the same time, the indicator of the receiver is always on and the linking is successful.

The FGr4B receiver is compatible with all AFHDS 3 transmitters Note It is currently applicable to PL18 1.0.55, NB4 2.0.93 and NB4 lite 1.0.10 and later versions. The high-frequency library used by the firmware is version 3.0... The failsafe function is used to output the channel according to the out-of-control protection value set by the user after the receiver loses its signal and is out of control to protect the model and personnel.. If after a firmware update is performed and the transmitter is unable to bind to the receiver, the receiver may need to be put into forced update times.. The design is small and light, easy to install.. If there are any problems, please contact our store in time. We will give you a satisfactory solution..

The S603 Super 6CH- receiver is a great solution for all model aircraft requiring full range up to 6 channels, high sensitivity and high stability and high precision, greatly improved performance.. Use special 3dbi gain antenna, inside add amplifier of more than 15dB gain. Stronger anti-interference ability and farther control rangeup to 2km.. Support PPM range 1-1.5km channel, convenient for Quadcopter, extra satellite is not needed.. Channels 6, Frequency Band 2.4GHz, Voltage Range 3.5-9.6V. Applicable Models for JRSpektrumDSM-X DSM2 Remote Control.

FlySky FGr4S V2 Receiver for Noble FS-NB4 Noble Pro Transmitter Traxxas HPS HPI RC Car Boat. Easy to bind and very fast link-up, quick and extremely stable in performance. The receiver supports PPMi-busPWM data output, suitable for AFHDS3 system remote controller. Ultra-small size and ultra-light weight, Dimensions 25.5 22 17.3 mm Weight 5.1g Effectively save space and reduce item's weight-bearing. Support Two-way Transmission, Internal Antenna.

RadioMaster - R88 V2 8ch Compatible PWM Sbus Receiver. Frequency range 2400-2483.5Mhz. Power input range 4.5-6V. Signal format D8, D16 SFHSS Compatible. Output format PWMSbus Range more than 1km.

Length 150 mm - detailed measurement of the antenna. Compatibility FrSky 2.4G Receiver, Futaba 2.4G Receiver. Package Contents Quantity of 20 antennas included. Quality Assurance Full ownership and responsibility for product quality. Return Policy Contact us for any dissatisfaction with the product.

The FGr8B receiver adopts Flysky's third-generation automatic frequency hopping digital system AFHDS 3.. It uses a single-antenna bidirectional transmission system and is uniquely designed to install and output PWM PPM i-bus in signals.. It supports all AFHDS3 transmitter and RF modules. Ultra-small size and ultra-lightweight, effectively save space and reduce item's weight-bearing.. Easy to bind and very fast link-up, quick and extremely stable in performance..

The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.. The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data Power Signal related under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.. The configurable 10 channel ports are a big feature of TD SR10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices Neuron ESC, Advance Sensors, etc. as well as simplifying the build setup.. ADV Stabilizer The TD SR10 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.. In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc. The advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver..

TD SR6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides output pins accordingly for SBUS Out and FBUSS.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices Neuron ESC, Advance Sensors, etc. as well as simplifying the build setup.. Stabilization Function The TD SR6 offers an enhanced Stabilization function which is an upgrade over the original classical gyroscope stabilization modes. The TD SR6 offers an advanced mode that provides more programmable stabilized channels and flexibility. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.. In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.. Simultaneous working 2.4G900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Built-in Stabilization Function Black Box function 4ms race mode with telemetry Long control range Range varies based on the RF Power settings. Over-The-Air OTA FW update 6 PWM channel ports FBUS S.Port SBUS Out Supports 16CH 24CH mode. Frequency 2.4GHz 900MHz Dimension 47.520.410.9mm LWH Weight 11.5g Operating Voltage 3.5-10V recommend 3.7-8.4V Operating Current 110mA5V Compatibility TANDEM series radio RF module in TD mode. 2.4G900M antenna connector IPEX1 Voltage Measurement Range via AIN2 External device 0-35V Battery Voltage Divider Ratio 110.

Its a full range receiver, similar range to X4R-SB and XSR, Much smaller size and lighter weight. Its possible to direct solder RX to FC with header pins without wires if FC supports it. XM is even smaller than the LR1000 by FuriousFPV, great RX option for their micro quads such as the Moskito70. Only downside of XM RX is the lack of S.Port full telemetry Smart Port, there is only RSSI telemetry. RSSI has a dedicated solder pad and its also available on the 16th channel.. RSSI pin outputs PWM signal 0-3.3V. Please be aware that this signal should not be connected to MinimOSD directly, as it will give you 0 or 100 only. You will need a digital to analogue converter low pass filter to convert PWM to analogue voltage level..

Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage Black Box function Built-in voltage sensor. 4ms Race Mode with Telemetry Long control range up to 50KM 100KM Over-The-Air OTA FW update. Supply current rangeevery single port Instantaneous current5A Continuous current3A 10 Configurable Channel Ports CP1 PWM SBUS Out FBUS S.Port SBUS In CP2-10 PWM SBUS Out FBUS S.Port. Frequency 2.4GHz 900MHz Dimension 46.526.314.7mm LWH Weight 16.6g Operating Voltage 3.5-10v DC Operating Current 180mA5V. Compatibility Tandem series transmitter TD protocol capable RF module Triple 2.4G900M Antenna 2 External 2.4G antenna IPEX1 1 External 900M antenna IPEX1.

S.Port F.Port. Tiny and super lightweight. Inverted S.Port. ACCESS protocol with Over The Air OTA. Full control range 500 to 600 meters telemetry range.

Low power requirements typically 55mA. Compatible with FrSky transmitters and module systems Mode D16. Compatible with popular simulators DRL, LiftOff, Freerider, HotProps, etc.. 8 proportional channel and 8 switch channel output set on the transmitter side. Firmware upgradable through the S.Port No additional drivers or additional software required for PC.

Easy to bind and very fast link-up, quick and extremely stable in performance.. Ultra-small size and ultra-light weight, effectively save space and reduce item's weight-bearing.. 6 channel receiver is compatible with FlySky FS-GT5 FS-IT4S Transmitter for Traxxas HPS HPI RC Car Boat.. Buillt-in gyroscope features automatic recovery of unexpected offsets, suitable for AFHDS2A system transmitter.. Any problem, please contact our store without hesitation. Honor to serve you.

2.4G mode is an improved version of the second generation digital automatic FM system with six channels to provide better signal.. Better compatibility, it can be compatible with FS-i4, FS-i6, FS-i6X,FS-i6S,FS-i10 variety of transmitters, reduce your trouble.. Support PPM output, single wire connection flight control, with iBus interface, scalable channel.. It is reliable, operates with 2.4 GHz AFHDS 2A signal, safe and steady and does not interfere with.. Applicable to aircraft glider helicopter, with I-Bus interface and data acquisition interface..

Offering superior protection against interference while maintaining lower power consumption and high reliable receiver senstivity.. Bidirectional Communication Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support.. Each transmitter and receiver has it's own unique ID. Once the transmitter and receiver have been paired, they will only communicate with each other, preventing other systems accidentally connecting to or interfering with the systems operation.. The high efficiency Omni-directional high gain antenna cuts down o interference, while using less power and maintaining a strong reliable connection.. The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life..

Notes Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM RXSR receiver. Ultra mini size and light weight. Supports redundancy function Support telemetry and Smart Port enabled. IPEX connector, replaceable antennas. Switchable SBUS CPPM signal output. US-BASED CUSTOMER SERVICE TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help We offer 247 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST. Providing outstanding customer service is our number one priority..

Flysky fly sky fs-gt3b rc radio transmitter and receiver fs-gr3e for rc car, rc truck, rc crawlers, and rc boat.. Working frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequency to avoid frequency jamming. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. Unique ID for each transmitter the receiver will automatically check ID after successful pairing, and this dramatically increases the ability of anti-jamming.. Model Memory - Servos NORREV - Steering Trim - Throttle Trim - Dual Rate - End Point - ABS Settings - EXP Settings - Trainer Port for VRC.

Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage Black Box function Built-in Power Switch Built-in current and voltage sensors 4ms Race Mode with Telemetry. Long control range up to 50KM 100KM Over-The-Air OTA FW update 18 Configurable Channel Ports CP1 PWM SBUS Out FBUS S.Port SBUS In Redundancy Func. CP2-18 PWM SBUS Out FBUS S.Port. Frequency 2.4GHz 900MHz Dimension 534016mm LWH Weight 28.9g Operating Voltage 4-10v. Operating Current 185mA5V Continuous Current 30A power the device Instantaneous Current 60A power the device. Compatibility Tandem series radio TD protocol capable RF module Dual XT30 Power Input Connector Triple 2.4G900M Antenna 1 Interior 2.4G chip antenna 1 External 2.4G antenna IPEX1 1 Newly designed 900M antenna.

Support redundancy function. Higher precision deviation of PWM. Lower latency on the PWM output. Strong anti-interference performance. Smart Port enabled and support telemetry data transmission.

Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage. Black Box function 4ms Race Mode with Telemetry Long control range up to 50KM 100KM. Over-The-Air OTA FW update 4 PWM channels S.Port Inverted S.Port FBUS SBUS Out SBUS In Redundancy Func.. Frequency 2.4GHz 900MHz Compatibility Tandem series radio TD protocol capable RF module. Triple 2.4G900M Antenna 2 External 2.4G antenna IPEX1 1 Newly designed 900M antenna.

Simultaneous working 2.4G900M dual-band TD mode Dual-band antenna design for multi-directional coverage. Compact lightweight design Black Box function 4ms race mode with telemetry Long control range up to 50KM 100KM. Over-The-Air OTA FW update 6 PWM channel ports FBUS S.Port SBUS Out Supports 16CH 24CH mode. Frequency 2.4GHz 900MHz Dimension 47.520.410.9mm LWH Weight 11.5g Operating Voltage 3.5-10Vrecommend 3.7-8.4V. Operating Current 110mA5V Compatibility TANDEM series radio RF module in TD mode 2.4G900M antenna connector IPEX1.

With solid performance based on the dual-band 900M2.4G RF signal link with multiple operating combinations of RF modes, the TANDEM X20R X20RS versions are equipped with the TD-ISRM RS built-in RF module which is capable of supporting multiple protocols like TW, TD, etc.. The TD-ISRM RS RF module has the dual 2.4G TW RF mode and supports simultaneous activation of working under TW and ACCESS R9 modes with the same module. In this configuration, the TW receiver and ACCESS R9 receiver can be connected via the SBUS INOUT ports to achieve redundant backup. This RF signal connection solution makes use of three different RF links at the same time in RC applications. This further enhances the RF signals reliability, particularly in long-distance RC operations scenarios.. The X20R and X20RS have changed from the original X20 design in appearance. The bottom hand grip adopts the overall design of the PRO version, eliminating the need for an additional grip cover, and allowing the bottom part to be fully grasped by the palm for a more comfortable and relaxed grip. Additionally, the Lite-type external module slot has been adjusted to provide more fitting installation space for external modules of different shapes, making it more convenient.. R and RS versions add 2 extra trims, allowing for more precise tunings during the operations. The slider levers on both sides of the transmitter support adjusting the positioning of the center, catering to different users habits and preferences. The primary input components, including trim caps, center-slider caps, and knobs are all made from metal, offering rugged quality and enhanced durability for outdoor use.. The newly upgraded antenna handle incorporates the good capability of impact resistance facing the tough conditions of outdoor fields. The reinforced and thickened antenna casing is better suited for comfort gripping but also does not compromise the antennas performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.. The X20R X20RS are also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control..

FITS FOR This 2.4G Receiver Antenna is necessory for Frsky XM and X4R rxtx field repair.. ABS MATERIAL Made of ABS Material, which is lighter and more stable.. 150MM LENGTH The aircraft receiver cable is 15cm length, fits perfect, nice and snug.. CONNCTOR TYPE Micro port-Frequency-2400 2500 MHz.. GUARANTEE Our product have 180 days warranty, if you have any question about this product, please feel to us, we will try our best to help you solve your problem..

The Standard 2.4Ghz 10-Channel Receiver for RC car and boat. Compatible with FS 2.4Ghz Surface Transmitter, very easy to bind. Ultra-small and light, save the car space, reduce vehicle load. Wireless protocol AFHDS 2A Remote control distance 5001500m in the air Antenna type Double copper tube antenna 150mm 2 Power 4.0-6.5V RSSI Supported Data interface PWM PPM i.bus s.bus Humidity range 20 -95. 10 channels meet your different needs..

Please note Flysky FS-i6X is default 6CH with FS-iA6B Receiver. If you have 10 channels receiver FS-iA10B, that you can open to 10 channels.. Bidirectional Communication --- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support. Multi-channel Hopping Frequency --- This system bandwidth ranges from 2.408GHz to 2.475GHz. This is divided in 135 channels. Each transmitter hops between 16 channels 32 for Japanese and Korean version in order to reduce interference from other transmitters.. Omni-directional Gain Antenna --- The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection. Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life..

Instantly Upgrade Your Home StereoTurn your existing speakers or amplifier into a wireless HiFi system with the DS200Pro Bluetooth receiver. Stream high-resolution music from your phone, tablet, or computer directly to your home stereo, AV receiver, or amplifier. Plug-and-play setup enjoy wireless music in seconds.. High-Resolution Sound with LDAC aptX HDExperience clearer vocals, deeper bass, and richer audio with Bluetooth 5.3, LDAC, aptX HD, aptX Low Latency, and AAC. This wireless HiFi audio receiver delivers noticeably better sound quality than standard Bluetooth for music listening and home stereo enjoyment.. Audiophile-Grade ESS SABRE DACBuilt-in premium ESS SABRE DAC reduces noise and distortion, revealing more detail and depth in every track. Instantly enhance classic speakers, amplifiers, or home stereo systems for true audiophile-level sound.. Stable Long-Range Bluetooth ConnectionClass 1 long-range Bluetooth chipset with external antenna ensures a strong, reliable signal across rooms. Enjoy uninterrupted wireless music streaming up to 100 ft 30 m. Range may vary depending on walls and obstacles.. Wide Compatibility Easy SetupSupports RCA and optical TOSLINK outputs for easy connection to amplifiers, powered speakers, and AV receivers. Includes RCA and optical cables for hassle-free setup simply plug, play, and enjoy wireless HiFi audio. Compatible with most home audio systems..

CompatibilityCompatible only with flysky brand Wireless protocol AFHDS 2A transmitter, for example, Flysky FS-GT5 FS-GT2E FS-GT2F FS-GT2G FS-iT3B FS-iT3C Transmitter.. Receiving RangeReceiving remote control range of 100-200 meters, RC receiver quick and extremely stable in performance for RC cars, trucks, crawlers, buggy, RC boats.. Great Anti-jammingWorking frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequencies to avoid frequency jamming.. Sophisticated DesignSmall in size and light in weight, it can be installed inside the model at will without taking up space.. Broad CompatibilityCompatible with all ESCs, servos, and additional electronics on the market, with an input voltage of 4-6.5V..

Compatible withFS-iA6B 6Ch Receiver Compatible with FS-i4 FS-i6 FS-i6S FS-i10 FS-GT2E FS-GT2G QX7 variety of transmitters.. Anti-interferenceFS-iA6B Receiver use 2.4GHz AFHDS2A signal operation, Quick and extremely stable in performance reliable, anti-interference.. Multi-port, wide rangeFS-iA6B Support PPM output, single-wire connection to flight control, with iBus interface, channel expandable, Range 500 1500m.. Ultra light weight designUltra light weight design for most RC cars, trucks and airplane.. Packing ListFlysky FS-iA6B Receiver, Bind plug.Any questions, OGUNKE RC will serve you..

The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data like Power Signal related can be well preserved.. The Archer Plus R8 8 high-precision PWM channel receivers support full-range signal strength with dual detachable antennas and guarantee optimal antenna reception and range. The R8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices XACT servos, ADV Sensors, etc. as well as simplifying the builds setup.. The Archer Plus R8 8 high-precision PWM channel receivers support full-range signal strength with dual detachable antennas and guarantee optimal antenna reception and range. The R8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices XACT servos, ADV Sensors, etc. as well as simplifying the builds setup.. Supports signal redundancy SBUS In Full control range with telemetry S.Port or FBUS Over-The-Air OTA FW update External batterydevice voltage detection. Number of Channels 824 channels 8 High-precision PWM 16 SBUS channels Mode 8 High-precision PWM 24 SBUS channels Mode Operating Voltage Range 3.5 -10V Operating Current 65mA5V Operating Range 2km Full rangeRange may vary based on local conditions. Voltage Measurement Range via AIN2 External device 0-35V Battery Voltage Divider Ratio 110 Antenna connector IPEX4 Compatibility FrSky 2.4GHz ACCESS ACCST D16 capable transmitters.

The FrSky RemoteNFC Panel is a convenient tool that can safely control the power supply by utilizing a set switch on the radio to enabledisable the power connection remotely, or by the switchboard using NFC Panel while having the device RB unit, PowerSwitch, etc. with battery always connected.. This kit is composed of a RemoteNFC Panel base and NFC Key. Quickly combine all parts, now you can simply utilize the NFC key or the functional switch to manage the power supply without having to plug inunplug the battery. Supports remote power control by ETHOS radios Safe and contactless NFC switch OnOff design. Avoid the hassle of plugging in unplugging the battery The power is enabled by default while the NFC base panel is connected. Dimension 33196.2mmLWH Weight 10.2g Operating Voltage Range 4-38V.

Hardware Enhanced ergonomic designed case with comfortable rounded hand grips 4 Standard Trims with additional 2 extra trims Integrate flash storage but also keep the internal TF card slot Easy-to-reach top switches and sliders With a flat base to improve stability when standing the radio Color Touch-Screen Displays. High-Precision Hall-Sensor Gimbals with a Metal Panel 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear Lite Type External Module Bay Haptic Vibration Alerts and Voice Speech Outputs Supports Recharge System for 2S Li-ion Battery USB Type-C Interface High-speed PARA Wireless Training System. TD-ISRM RF Module Built-in TD 900M2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16 Mode Compatible with ACCST Receivers with D16 V2 or later FW 2.4GACCESS Mode Compatible with ACCESS Receivers 900M ACCESS Mode Compatible with ACCESS R9 868915MHz Receivers Capable of simultaneous working under ACCESS mode. 2.4G 900M TD Mode Compatible with TD Receivers Long-range control and super-low latency with telemetry. ETHOS System Clear and Intuitive UI Design Supports Dual Operation Modes of Radio Display Touch and Non-Touch Supports Multi-Language Switching HardwareSoftware Version and Factory Version Detection Supports running LUA Scripts.

TWIN series TW R6 receiver features a new stable TW protocol that benefits from simultaneously integrating dual active 2.4G frequency bands. The TW active-active protocol is different from the general active-standby redundancy solutions where one receiver takes over signal control only when the other is in Failsafe mode, with the TW protocol, dual 2.4G frequency bands are active on the TW series receiver at the same time. This receiver is designed for RC users who want to benefit from resilience and long-range in their radio communications, typically up to tens of kilometers is achievable.. The TW R6 receiver is equipped with 2x 2.4G antennas. The signal output ports include one SBUS output channel and 6 PWM output channel ports.. It also supports telemetry functions through FBUS S.Port. By setting the TW R6 to use FBUS protocol in the ETHOS system, the signal control and telemetry can be connected to any device that supports FBUS protocol through only one line to achieve bidirectional transmission, also simplifying the model build using fewer wires. In addition to all this, the inverted S.Port on the receiver can allow for easily connecting flight controllers.. In addition, TW R6 also supports 4ms race mode with ultra-low latency. When combining race mode with TW series resilient dual 2.4G solution, racers have a fast, stable, and reliable signal in racing competitions, without fear of signal loss due to interference..

Reliable, interference free 2.4GHz AFHDS signal operation.Quick and extremely stable in performance. This 3CH receiver is very easy to bind very fast link-up, strong signal distance. Compatible with FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S Transmitter. Quick and extremely stable in performance for RC cars, Truck, buggy, RC Boat. NoteThe factory communication protocol of GR3E receiver is AFHDS . Only when the transmitter communication protocol is AFHDS, it can link to the frequency. If the transmitter communication protocol is AFHDS 2A, you need to adjust the transmitter communication protocol to AFHDS according to the instructions in the manual. Only then can it be paired. Input voltage 4.0-6.5V DC, this receiver is only suitable for part of the Flysky series Transmitter.

Reliable, interference free 2.4GHz AFHDS2A signal operation.. 6-Channel receiver.. Digital receiver system.. Quick and extremely stable in performance.. Ultra light weight design..

Easy to bind and very fast link-up, quick and extremely stable in performance.. Ultra-small size and ultra-light weight, effectively save space and reduce item's weight-bearing.. 6 channel receiver is compatible with FlySky FS-GT5 FS-IT4S RC transmitter, and replacement for Traxxas HPS HPI RC car or boat.. Buillt-in gyroscope features automatic recovery of unexpected offsets, suitable for AFHDS2A system transmitter.. Any problem, please contact our store without hesitation. Honor to serve you..

ACCESS protocol with Over The Air OTA Supports signal redundancy SBUS In. Supports power redundancy Dual battery ports Full control range with telemetry. S.Port F.Port Anti-interference in spark-ignition Anti-Vibration. External battery device voltage detection Control Range Full range with telemetry Full Range 2km, range may vary based on local conditions. Compatibility All FrSky ACCESS transmitters.

ACCESS protocol with Over The Air OTA Tiny and lightweight. Supports signal redundancy SBUS In S.Port F.Port External battery device voltage detection. 1624 Configurable SBUS Channels 6 High-precision PWM Channels. Compatibility All FrSky ACCESS transmitters. Control Range Full range with telemetry Full Range 2km, range may vary based on local conditions..

ACCESS protocol with Over The Air OTA Anti-interference in spark-ignition. Supports signal redundancy SBUS In Full control range with telemetry. S.Port F.Port External battery device voltage detection. 8 High-precision PWM Channels Control Range Full range with telemetry. Voltage Measurement Range via AIN2 External device 0-36V Compatibility All FrSky ACCESS transmitters.

Compatibility R9M LiteR9MR9M 2019 with ACCST firmware R9M LiteR9M Lite ProR9M 2019 with ACCESS firmware. Numbers of Channel 816CH CH16 outputs RSSI. Supports quick configuration for setting multiple flight modes quick modeS.Port. ACCESS protocol and supports OTA functions. Built-in 3-axis gyroscope and 3-axis accelerometer.

ACCESS protocol and supports OTA functions 900MHz868MHz long-range with low latency. Enhanced and durable design 6 standard servo connectors default PWM channel. Switchable CH5CH6 into S.PortSBUS Output channels Support S.Port F.Port Configurable in OpenTX FrOS menu. Signal redundancy function External battery detection Detachable Ipex1 connector antenna. Compatibility R9M Lite R9M Lite Pro R9M 2019 with ACCESS firmware.

Built-in 3-axis gyroscope and 3-axis accelerometer sensor module. Built-in RSSI PWM output0-3.3V. Built-in battery voltage detection. Smart Port enabled. SBUS Port enabled.

With RSSI PWM output 03.3V. Parallel two X8R to become a 16 channel receiver.. SmartPort enabled, realizing two-way full duplex transmission.. More number of channels 18ch from conventional channel outputs, 116ch from SBUS port,or combine two X8R to become a 16 channels receiver.. All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode. For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules..

Notes Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM RXSR receiver.This insanely tiny 2.4GHz diversity receiver available from FrSky is the next big thing in miniaturization of racing craft.Perfect for those racers who are looking to lower their AUW.. XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time. Up to 16CH from SBUS CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller . Compatible ------ Compatible with Frsky X9D Plus X9E X12S transmitter.. weight1.6g, Dimension 21.5123.5mmL x W x H.Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW, especially for FPV racing drone, mini drone, such as 130 110 drone .. FrSky XM Plus is dual antenna Frsky XM is only one, with dual antenna, it has strong anti-interference, make sure you can control your drone anytime.If you have any problem, feel free to contact us with detailed information and bar code. Our technology support team will help check and solve the problem. In addition, we also have US support center. If you want, you can also call them or return it back to them and they can fix it for you..