LONG-LASTING POWER 7.4V 3000mAh Li-Po battery provides extended runtime for Frsky and Radiolink transmitters, keeping you in control for hours.. HIGH DISCHARGE RATE 8C output ensures responsive performance and efficient power delivery for demanding RC usage.. SAFETY FIRST Includes USB charging cables with built-in IC protection and LED indicators to monitor charging status. Do not charge inside transmitter.. LIGHTWEIGHT COMPACT DESIGN Each battery weighs just 101g and measures 90mm x 27mm x 26mm, ideal for handheld controller compartments.. COMPLETE PACKAGE SUPPORT Includes 2 x 3000mAh Li-Po batteries and 2 x USB charging cables. Backed by 24-month worry-free warranty and responsive customer support..

Included 32 PCS rubber covers 8 black, 8 red, 4 white, 4 blue, 4 green and 4 transparent. Suitable for most brand transmitters like FrSky Taranis X9D Plus Q X7 X-Lite Horus X12S, Flysky FS-i6, Spektrum DX6e DX8 NX8, Radiomaster TX16s, Jumper T16 T18, Radiolink, Futaba and dxs transmitter.. Colorful rubber covers make it easy for you to recognize the function of each switch. The cover can be put on the switch of transmitter to prevent slipping and reduce pressure on finger when toggle the switch. 2 size covers make it suitable for most brand transmitters. If the rubber cap longer than your switch, you can trim it to a proper length by scissors.

Include 12PCS plastic colorful tube, 12PCS black caps and 12PCS red caps. The colorful plastic tube is durable and light-weight. Suitable for Quadcopter, FPV Racing Drone receiver antenna. Effectively protects the antenna from damage when crashing. The tube with 2mm inner diameter and 150mm length is suitable for all receiver antenna.

Ergonomic and compact design Haptic vibration alerts and voice speech outputs. Open source operating system Installed with ACCESS protocol. High-speed module digital interface. Supports spectrum analyzer function wired training function. Easily accessible battery compartment Batteries not included, adaptive with replaceable 18650 Li-ion batteries.

Material Constructed with a durable aluminum casing for enhanced protection and longevity. Voltage Capacity Supports a high voltage of up to 8.4V for optimal speed performance. Gearing Features robust metal gears for increased durability and precision. Bearing Type Equipped with dual precision ball bearings and a hall sensor for smooth operation. Firmware Offers updatable firmware to ensure superior performance and longevity.

DUAL-BAND RF MODULE Features built-in TD-ISRM RS dual-band internal RF module supporting multiple RF modes with super low-latency and long-range control capabilities.. HIGH-RESOLUTION DISPLAY Equipped with an 800x480 outdoor high brightness touchscreen for clear visibility and intuitive operation in various lighting conditions.. PREMIUM CONTROLS MC18 all CNC high-precision Hall-sensor gimbals with 10 ball-bearings, plus 2 knobs and 6 front custom buttons for precise control.. ADVANCED FEATURES Includes 512MB flash storage, 6-axis gyroscope sensor, haptic vibration alerts, and voice speech outputs for enhanced user experience.. CONNECTIVITY OPTIONS Features USB Type-C interface for data transmission and charging, with external LoRa antenna connectors for 900M2.4G frequencies..

Built-in TD-ISRM RS Dual-Band Internal RF Module 900M2.4G Dual Band TD Mode Dual 2.4G TW Mode ACCESS 2.4G ACCESS R9 Modes 2.4G ACCST D16 Mode Super Low-Latency and Long-Range Control with Telemetry Upgraded Robust Antenna Handle 900M2.4G External Antenna Connectors LoRa mode. 800480 Resolution Outdoor High Brightness Touchscreen Easy-to-Reach Top Switches and Sliders 2 Knobs, 4 Standard Trims with 2 Extra Trims 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear All Knobs, Trims with All-CNC Metal Caps Built-in 512MB Flash Drive Storage. Built-in 6-axis Gyroscope Sensor High-Speed PARA Wireless Training System Data Transmission Recharge System via USB Type-C Interface Haptic Vibration Alerts and Voice Speech Outputs MC18 All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing Adjustable 45 60 stick travel Additional Travel Limiter Tool is required.

UPGRADED ROBUST ANTENNA HANDLE EXTERNAL LoRa ANTENNA CONNECTORS The newly upgraded antenna handle incorporates the good capability of impact resistance facing the tough conditions of outdoor fields. The reinforced and thickened antenna casing is better suited for comfort gripping but also does not compromise the antennas performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.. The X20R X20RS are also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control.. Built-in TD-ISRM RS Dual-Band Internal RF Module 900M2.4G Dual Band TD Mode Dual 2.4G TW Mode ACCESS 2.4G ACCESS R9 Modes 2.4G ACCST D16 Mode Further Improvements for Form Factor Design Super Low-Latency and Long-Range Control with Telemetry Upgraded Robust Antenna Handle 900M2.4G External Antenna Connectors LoRa mode 800480 Resolution Outdoor High Brightness Touchscreen 2 Angle Adjustable Slider Levers. 2 Knobs, 4 Standard Trims with 2 Extra Trims 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear All Knobs, Trims, and Central Linear-Slider with All-CNC Metal Caps Built-in 8GB Flash Drive Storage Digital Audio Power Amplifier Built-in 6-axis Gyroscope Sensor High-Speed PARA Wireless Training System Data Transmission Recharge System via USB Type-C Interface Haptic Vibration Alerts and Voice Speech Outputs M20 High-Precision 4 Ball-Bearing Hall-Sensor Gimbals with Metal Panel. Dimension 20521390mm LWH Weight 892gBattery Excl. 1024gBattery Incl. Operating System ETHOS Internal RF module TD-ISRM RS Number of Channels Up to 24 Built-in Flash Storage 8GB Operating Voltage Range 6.5 8.4V 2S Li-battery Operating Temperature -10C60C 14F140F. Operating Current 600mA7.4V typ. Charging Current 1A 200mA Recharge System for 2S Li-ion Battery USB Type-C Interface USB Adaptor Voltage 5V0.2V USB Adaptor Current 2.0A Backlit Touchable LCD Resolution 800480 Compatibility ACCST D16 ACCESS TD TW receivers Lite Type External Module Bay.

UPGRADED ROBUST ANTENNA HANDLE EXTERNAL LoRa ANTENNA CONNECTORS The newly upgraded antenna handle incorporates the good capability of impact resistance facing the tough conditions of outdoor fields. The reinforced and thickened antenna casing is better suited for comfort gripping but also does not compromise the antennas performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.. The X20R X20RS are also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control.. Built-in TD-ISRM RS Dual-Band Internal RF Module 900M2.4G Dual Band TD Mode Dual 2.4G TW Mode ACCESS 2.4G ACCESS R9 Modes 2.4G ACCST D16 Mode Further Improvements for Form Factor Design Super Low-Latency and Long-Range Control with Telemetry Upgraded Robust Antenna Handle 900M2.4G External Antenna Connectors LoRa mode 800480 Resolution Outdoor High Brightness Touchscreen 2 Angle Adjustable Slider Levers. 2 Knobs, 4 Standard Trims with 2 Extra Trims 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear All Knobs, Trims, and Central Linear-Slider with All-CNC Metal Caps Built-in 8GB Flash Drive Storage Digital Audio Power Amplifier Built-in 6-axis Gyroscope Sensor High-Speed PARA Wireless Training System Data Transmission Recharge System via USB Type-C Interface Haptic Vibration Alerts and Voice Speech Outputs M20 High-Precision 4 Ball-Bearing Hall-Sensor Gimbals with Metal Panel. Dimension 20521390mm LWH Weight 892gBattery Excl. 1024gBattery Incl. Operating System ETHOS Internal RF module TD-ISRM RS Number of Channels Up to 24 Built-in Flash Storage 8GB Operating Voltage Range 6.5 8.4V 2S Li-battery Operating Temperature -10C60C 14F140F. Operating Current 600mA7.4V typ. Charging Current 1A 200mA Recharge System for 2S Li-ion Battery USB Type-C Interface USB Adaptor Voltage 5V0.2V USB Adaptor Current 2.0A Backlit Touchable LCD Resolution 800480 Compatibility ACCST D16 ACCESS TD TW receivers Lite Type External Module Bay.

Built-in TD-ISRM RS Dual-Band Internal RF Module 900M2.4G Dual Band TD Mode Dual 2.4G TW Mode ACCESS 2.4G ACCESS R9 Modes 2.4G ACCST D16 Mode Further Improvements for Form Factor Design Super Low-Latency and Long-Range Control with Telemetry Upgraded Robust Antenna Handle. 900M2.4G External Antenna Connectors LoRa mode 800480 Resolution Outdoor High Brightness Touchscreen 2 Angle Adjustable Slider Levers 2 Knobs, 4 Standard Trims with 2 Extra Trims 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear All Knobs, Trims, and Central Linear-Slider with All-CNC Metal Caps Built-in 8GB Flash Drive Storage. Text to Speech TTS Function Digital Audio Power Amplifier Built-in 6-axis Gyroscope Sensor High-Speed PARA Wireless Training System Data Transmission Recharge System via USB Type-C Interface. Haptic Vibration Alerts and Voice Speech Outputs MC20R All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing Dual-side stick haptic feedback LeftRight can do vibration independently. Easy Travel-adjustable with any desired degree from 45 to 60 8 rotatable panel.

Built-in TD-ISRM RS Dual-Band Internal RF Module 900M2.4G Dual Band TD Mode Dual 2.4G TW Mode ACCESS 2.4G ACCESS R9 Modes 2.4G ACCST D16 Mode Further Improvements for Form Factor Design Super Low-Latency and Long-Range Control with Telemetry Upgraded Robust Antenna Handle. 900M2.4G External Antenna Connectors LoRa mode 800480 Resolution Outdoor High Brightness Touchscreen 2 Angle Adjustable Slider Levers 2 Knobs, 4 Standard Trims with 2 Extra Trims 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear All Knobs, Trims, and Central Linear-Slider with All-CNC Metal Caps Built-in 8GB Flash Drive Storage. Text to Speech TTS Function Digital Audio Power Amplifier Built-in 6-axis Gyroscope Sensor High-Speed PARA Wireless Training System Data Transmission Recharge System via USB Type-C Interface. Haptic Vibration Alerts and Voice Speech Outputs MC20R All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing Dual-side stick haptic feedback LeftRight can do vibration independently. Easy Travel-adjustable with any desired degree from 45 to 60 8 rotatable panel.

DUAL 2.4G RADIO SYSTEM The TWIN X14 stands out as a robust radio system, boasting the capability of utilizing dual 2.4G frequencies simultaneously on the same receiver in TW mode. Different from standard active-standby redundancy solutions, the TW active-active protocol ensures both 2.4G frequency bands are actively engaged on the TWIN series RF module and receiver simultaneously. DUAL INTERNAL RF ANTENNAS Equipped with two internal 2.4G RF antennas, the TWIN X14 offers expansive multi-directional coverage for transmitting signals with enhanced reliability and performance. HIGH-SPEED LOW-LATENCY PERFORMANCE Leveraging dual frequency attributes alongside the exterior antenna mounting frame, the Twin system provides less latency, higher reliability, and faster data rates for professional RC control. MULTIPLE PROTOCOL COMPATIBILITY In addition to the TW mode, TWIN X14 also supports ACCST D16 and ACCESS modes, providing users with a wide range of compatible receiver options to choose from when building RC models. 24-CHANNEL TRANSMITTER SYSTEM Features a comprehensive 24-channel configuration allowing for extensive control options and flexibility in managing complex RC aircraft and drone setups.

High-Performance Coreless Motor 8.4V HV The Xact 5200 series M5213H coreless servo is designed for high-end RC models, supporting high-voltage operation up to 8.4V. It delivers an exceptional balance of high speed and torque, ensuring quick and precise responses for demanding flight maneuvers.. All-Aluminum CNC Case Metal Gears Encased in a fully CNC machined aluminum protective case, this servo offers superior heat dissipation and structural integrity. Combined with high-durability metal gears and dual precision ball bearings, it is built to withstand high-intensity use.. Advanced FBUSSBUSPWM Protocol Support Equipped with the versatile FBUS protocol, this servo enables real-time telemetry data transmissionsuch as current, voltage, and temperatureback to your radio. It also maintains full compatibility with standard SBUS and PWM protocols.. Configurable Precision Hall Sensor Featuring a built-in high-precision Hall sensor, the M5213H provides exceptional centering and accuracy. Users can easily configure servo travel and other parameters via the ETHOS configuration tool or the Freelink app.. Smart Safety Monitoring OTA Firmware Includes built-in over-current and over-heat monitoring with an alarm system to protect your electronics. It supports Over-The-Air OTA firmware updates, ensuring your equipment always benefits from the latest performance enhancements..

Ultra-Speed Response Specifically engineered for flight controls requiring instantaneous reaction times its rapid transit speed at 8.4V makes it the premier choice for 380-420 class helicopter tail locking.. 8.4V High Voltage Capable Full support for up to 8.4V high-voltage power allows for a direct connection to 2S LiPo batteries, significantly boosting response frequency and power output.. FBUS Telemetry Integration Utilizing the FBUS protocol, this servo transmits real-time telemetry dataincluding current, voltage, and temperaturedirectly to your radio for enhanced flight safety.. Precision CNC Construction The fully CNC-machined aluminum housing provides a premium metallic finish while ensuring optimal heat dissipation and structural rigidity under high-vibration conditions.. Smart Hall Sensor Technology Features a built-in high-precision Hall sensor for superior centering and linear operation, supporting wireless OTA firmware updates via the ETHOS system..

1-2s Compatible. Runcam Nano 2 FVP Cam. up to 200mw VTX Range. 1600KV Brushless Motors.

Exclusive Battleship Grey AW Edition The Aviation World AW Battleship Grey edition features a premium CNC-machined metal shell with a sophisticated matte finish. Inspired by modern naval and aviation aesthetics, this low-profile yet powerful color choice offers an anti-glare surface and a professional, heavy-duty feel that resonates with elite RC pilots..

Hardware Enhanced ergonomic designed case with comfortable rounded hand grips 4 Standard Trims with additional 2 extra trims Integrate flash storage but also keep the internal TF card slot Easy-to-reach top switches and sliders With a flat base to improve stability when standing the radio Color Touch-Screen Displays. High-Precision Hall-Sensor Gimbals with a Metal Panel 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear Lite Type External Module Bay Haptic Vibration Alerts and Voice Speech Outputs Supports Recharge System for 2S Li-ion Battery USB Type-C Interface High-speed PARA Wireless Training System. TD-ISRM RF Module Built-in TD 900M2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16 Mode Compatible with ACCST Receivers with D16 V2 or later FW 2.4GACCESS Mode Compatible with ACCESS Receivers 900M ACCESS Mode Compatible with ACCESS R9 868915MHz Receivers Capable of simultaneous working under ACCESS mode. 2.4G 900M TD Mode Compatible with TD Receivers Long-range control and super-low latency with telemetry. ETHOS System Clear and Intuitive UI Design Supports Dual Operation Modes of Radio Display Touch and Non-Touch Supports Multi-Language Switching HardwareSoftware Version and Factory Version Detection Supports running LUA Scripts.

High-Visibility Lava Orange Red Edition The Aviation World AW Orange Red Edition features a premium CNC machined metal shell with a vibrant, high-visibility finish. Perfect for pilots who want a bold, high-energy aesthetic thats easy to spot at the flying field while maintaining a professional flagship feel.. TD-ISRM Pro Dual-Band Reliability Equipped with the advanced TD-ISRM Pro RF system, this transmitter delivers ultra-stable 2.4GHz 900MHz dual-band signal coverage. Benefit from industry-leading low latency and robust anti-interference performance for safe, long-range flying.. High-Precision CNC Metal Gimbals Features top-tier CNC-machined gimbals with high-precision sensors for buttery-smooth control. The ergonomic design ensures fatigue-free operation during long flight sessions, providing the ultimate connection between pilot and aircraft.. Voice Recognition ETHOS OS Empower your flight with integrated voice control, allowing hands-free operation of critical functions. The intuitive ETHOS operating system provides a seamless touch-screen interface, making complex model setups simple and fast.. Complete Flagship Travel Solution Includes a professional heavy-duty carrying case tailored for the X20 PRO AW. This Orange Red masterpiece is protected by high-density foam, ensuring your high-end gear travels safely to every competition..

Frsky FCC D16 Protocol Please kindly note that this remote controller comes with the Frsky FCC D16 protocol, it also support change 3 different internal protocols which are Frsky D8, Futaba S-FHSS, Frsky FCC D16. Pilots can change the protocol easily via radio transmitter. For how to change it, please refer to the user manual. Firmware Version BETAFPV has released the new firmware for this remote controller, and please note that you can only bind the receive to this remote controller with the same firmware version, otherwise, they will bind unsuccessfully. BETAFPV Configurator Supported The BETAFPV Configurator V2 is an open-source configuration tool tailored for BETAFPV drones and remote controls that support macOS Linux Debian family platforms. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Please DO NOT power on the transmitter before connecting it to the PC. Doing so will render the USB port non-functional. Firmware Update Supported BETAFPV has released the new firmware for the LiteRadio series remote controller, which brings new features and improvements. Pilots can flash the latest firmware to enjoy the new functions. Please confirm the firmware version first, and refer to the user manual in the package to upgrade the latest firmware if your transmitter has the older firmware version. SimulatorPlatform Supported Experience the ultimate flexibility with LiteRadio 3, your gateway to popular FPV simulators like VelociDrone, Liftoff, TRYP, DRL, DCL, etc. Whether you're on a desktop, Android device, or tablet, LiteRadio 3 ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the Flight Simulator on the Windows system and elevate your virtual flying experience to new heights.

The Tandem dual-band receivers are unlike any other FrSky 2.4Ghz or 900Mhz receivers, they work simultaneously at both 2.4Ghz and 900Mhz frequencies. That means Tandem receivers provide not only the low latency signal and long-range control but also benefit from the enhanced level of high reliability and anti-interference performance.. The Tandem series receivers adopt the triple antenna design that provides multi-directional wide coverage for the remote signal. The data Power Signal related under unusual status during the flight can be recorded by Tandem receivers through a built-in black box module.. The configurable 10 channel ports are a big feature of TD SR10, each channel port can be assigned as PWM, SBUS, FBUS, or S.Port. With the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices Neuron ESC, Advance Sensors, etc. as well as simplifying the build setup.. ADV Stabilizer The TD SR10 offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.. In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc. The advanced stabilizer feature incorporates high-precision telemetry sensors to monitor altitude, vertical speed, etc. This ADV feature is an additional benefit compared to using a regular S series stabilization receiver..

TD SR6 receiver offers 6 PWM channel outputs and is bundled in a compact lightweight design, the receiver also provides output pins accordingly for SBUS Out and FBUSS.Port. By setting the S.Port to the FBUS protocol, the TD receivers can open up the possibility of seamlessly pairing with multiple telemetry devices Neuron ESC, Advance Sensors, etc. as well as simplifying the build setup.. Stabilization Function The TD SR6 offers an enhanced Stabilization function which is an upgrade over the original classical gyroscope stabilization modes. The TD SR6 offers an advanced mode that provides more programmable stabilized channels and flexibility. The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.. In the advanced stabilization mode, all the output pins are configurable for stabilization and additional advanced features such as Stab file sharing, programmable parameters, developer access, etc.. Simultaneous working 2.4G900M dual-band TD mode Dual-band antenna design for multi-directional coverage Compact lightweight design Built-in Stabilization Function Black Box function 4ms race mode with telemetry Long control range Range varies based on the RF Power settings. Over-The-Air OTA FW update 6 PWM channel ports FBUS S.Port SBUS Out Supports 16CH 24CH mode. Frequency 2.4GHz 900MHz Dimension 47.520.410.9mm LWH Weight 11.5g Operating Voltage 3.5-10V recommend 3.7-8.4V Operating Current 110mA5V Compatibility TANDEM series radio RF module in TD mode. 2.4G900M antenna connector IPEX1 Voltage Measurement Range via AIN2 External device 0-35V Battery Voltage Divider Ratio 110.

Its a full range receiver, similar range to X4R-SB and XSR, Much smaller size and lighter weight. Its possible to direct solder RX to FC with header pins without wires if FC supports it. XM is even smaller than the LR1000 by FuriousFPV, great RX option for their micro quads such as the Moskito70. Only downside of XM RX is the lack of S.Port full telemetry Smart Port, there is only RSSI telemetry. RSSI has a dedicated solder pad and its also available on the 16th channel.. RSSI pin outputs PWM signal 0-3.3V. Please be aware that this signal should not be connected to MinimOSD directly, as it will give you 0 or 100 only. You will need a digital to analogue converter low pass filter to convert PWM to analogue voltage level..

Low power requirements typically 55mA. Compatible with FrSky transmitters and module systems Mode D16. Compatible with popular simulators DRL, LiftOff, Freerider, HotProps, etc.. 8 proportional channel and 8 switch channel output set on the transmitter side. Firmware upgradable through the S.Port No additional drivers or additional software required for PC.

S.Port F.Port. Tiny and super lightweight. Inverted S.Port. ACCESS protocol with Over The Air OTA. Full control range 500 to 600 meters telemetry range.

Notes Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM RXSR receiver. Ultra mini size and light weight. Supports redundancy function Support telemetry and Smart Port enabled. IPEX connector, replaceable antennas. Switchable SBUS CPPM signal output. US-BASED CUSTOMER SERVICE TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help We offer 247 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST. Providing outstanding customer service is our number one priority..

Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage. Black Box function 4ms Race Mode with Telemetry Long control range up to 50KM 100KM. Over-The-Air OTA FW update 4 PWM channels S.Port Inverted S.Port FBUS SBUS Out SBUS In Redundancy Func.. Frequency 2.4GHz 900MHz Compatibility Tandem series radio TD protocol capable RF module. Triple 2.4G900M Antenna 2 External 2.4G antenna IPEX1 1 Newly designed 900M antenna.

Flysky fly sky fs-gt3b rc radio transmitter and receiver fs-gr3e for rc car, rc truck, rc crawlers, and rc boat.. Working frequency between 2.40GHz-2.4835GHz has been divided into 160 frequency points, each system uses 16 points and 160 hopping frequency to avoid frequency jamming. The system is specially developed for all the Radio control models, that offers super active and passive anti-jamming capabilities, very low power consumption and high receiver sensitivity. Unique ID for each transmitter the receiver will automatically check ID after successful pairing, and this dramatically increases the ability of anti-jamming.. Model Memory - Servos NORREV - Steering Trim - Throttle Trim - Dual Rate - End Point - ABS Settings - EXP Settings - Trainer Port for VRC.

Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage Black Box function Built-in Power Switch Built-in current and voltage sensors 4ms Race Mode with Telemetry. Long control range up to 50KM 100KM Over-The-Air OTA FW update 18 Configurable Channel Ports CP1 PWM SBUS Out FBUS S.Port SBUS In Redundancy Func. CP2-18 PWM SBUS Out FBUS S.Port. Frequency 2.4GHz 900MHz Dimension 534016mm LWH Weight 28.9g Operating Voltage 4-10v. Operating Current 185mA5V Continuous Current 30A power the device Instantaneous Current 60A power the device. Compatibility Tandem series radio TD protocol capable RF module Dual XT30 Power Input Connector Triple 2.4G900M Antenna 1 Interior 2.4G chip antenna 1 External 2.4G antenna IPEX1 1 Newly designed 900M antenna.

Support redundancy function. Higher precision deviation of PWM. Lower latency on the PWM output. Strong anti-interference performance. Smart Port enabled and support telemetry data transmission.

The FrSky Tandem X18RS is a high-performance aircraft radio designed for precision control, long-range capabilities, and superior durability.. Its upgraded antenna handle features a reinforced casing, offering excellent impact resistance while maintaining optimal signal transmission for a reliable flying experience.. Equipped with dual external antenna connectors, it supports 900M2.4G LoRa mode for enhanced range and stability in demanding environments.. The X18RS boasts an upgraded 800480 high-brightness touchscreen, ensuring clear visibility under sunlight, while its all-metal trim caps and knobs provide rugged durability. The MC18 CNC metal gimbals allow for adjustable 45 or 60 stick travel, offering pilots a customizable control feel.. With a built-in TD-ISRM RS RF module, it supports multiple dual-band modes, including ACCESS and ACCST D16, ensuring ultra-low latency and seamless telemetry.. Additional features like a built-in 6-axis gyroscope, USB-C data transmission, haptic alerts, and a high-speed PARA training system make the X18RS a top-tier choice for RC helicopter and FPV drone enthusiasts..

With solid performance based on the dual-band 900M2.4G RF signal link with multiple operating combinations of RF modes, the TANDEM X20R X20RS versions are equipped with the TD-ISRM RS built-in RF module which is capable of supporting multiple protocols like TW, TD, etc.. The TD-ISRM RS RF module has the dual 2.4G TW RF mode and supports simultaneous activation of working under TW and ACCESS R9 modes with the same module. In this configuration, the TW receiver and ACCESS R9 receiver can be connected via the SBUS INOUT ports to achieve redundant backup. This RF signal connection solution makes use of three different RF links at the same time in RC applications. This further enhances the RF signals reliability, particularly in long-distance RC operations scenarios.. The X20R and X20RS have changed from the original X20 design in appearance. The bottom hand grip adopts the overall design of the PRO version, eliminating the need for an additional grip cover, and allowing the bottom part to be fully grasped by the palm for a more comfortable and relaxed grip. Additionally, the Lite-type external module slot has been adjusted to provide more fitting installation space for external modules of different shapes, making it more convenient.. R and RS versions add 2 extra trims, allowing for more precise tunings during the operations. The slider levers on both sides of the transmitter support adjusting the positioning of the center, catering to different users habits and preferences. The primary input components, including trim caps, center-slider caps, and knobs are all made from metal, offering rugged quality and enhanced durability for outdoor use.. The newly upgraded antenna handle incorporates the good capability of impact resistance facing the tough conditions of outdoor fields. The reinforced and thickened antenna casing is better suited for comfort gripping but also does not compromise the antennas performance. On the contrary, the redesigned antenna can transmit signal data more effectively, providing pilots with a more reliable flying control experience.. The X20R X20RS are also equipped with 2 external antenna connectors, which can be mounted with additional 2.4G and 900M antennas for enhancing the RF capabilities working under the LoRa modes, to achieve enhanced long-range control..

Simultaneous working dual-band TD mode Triple antenna design for multi-directional coverage Black Box function Built-in voltage sensor. 4ms Race Mode with Telemetry Long control range up to 50KM 100KM Over-The-Air OTA FW update. Supply current rangeevery single port Instantaneous current5A Continuous current3A 10 Configurable Channel Ports CP1 PWM SBUS Out FBUS S.Port SBUS In CP2-10 PWM SBUS Out FBUS S.Port. Frequency 2.4GHz 900MHz Dimension 46.526.314.7mm LWH Weight 16.6g Operating Voltage 3.5-10v DC Operating Current 180mA5V. Compatibility Tandem series transmitter TD protocol capable RF module Triple 2.4G900M Antenna 2 External 2.4G antenna IPEX1 1 External 900M antenna IPEX1.

Runs Rotorflight 2.x Helicopter Control Software Built-In FrSky FBUS-Capable Receiver TW or AP Protocol. Robust CNC Aluminum Case, Functional Heatsink for MCU STM32F722 Microcontroller for Power and Flexibility. Precision Barometer, 3-Axis Gyroscope and 3-Axis Accelerometer. 128MB Blackbox Function for TuningTroubleshooting. 9 Primary Main Header Pins for Flexibility and Power Distribution.

FITS FOR This 2.4G Receiver Antenna is necessory for Frsky XM and X4R rxtx field repair.. ABS MATERIAL Made of ABS Material, which is lighter and more stable.. 150MM LENGTH The aircraft receiver cable is 15cm length, fits perfect, nice and snug.. CONNCTOR TYPE Micro port-Frequency-2400 2500 MHz.. GUARANTEE Our product have 180 days warranty, if you have any question about this product, please feel to us, we will try our best to help you solve your problem..

Kindly NotePlease kindly note This remote controller comes with the Frsky D16 FCC LBT protocol, this protocol currently does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM receivers.System Upgrade Updates with BETAFPV self-developed LiteRadio System. Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter, which is more convenient for the beginner racer to operate. Frsky FCC D16 Protocol LiteRadio 2 SE transmitter comes with Frsky FCC D16ACCST1.X by default. Pilots can easily change Futaba S-FHSS, Frsky D8, Frsky FCC D16, and Frsky LBT D16 mode via the radio transmitter. For how to flash, please refer to product pictures and user manual. BETAFPV Configurator V2 Supported It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports WindowsmacOSLinux Debian family platforms. FPV Simulators Platforms Supported This radio transmitter has the function of an FPV simulator, which can act as a USB Joystick, suitable for FPV beginners to play FPV simulators like Liftoff, TRYP, DRL, etc. Whether on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights. Built-in BatteryCharging Module LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-chargedwhen the voltage is lower than 3.5V, the LED will turn red first, then it will turn blue and flash slowly.

The Archer Plus Series receivers include some new features. Firstly an enhanced anti-RF-Interference capability can offer a more solid RF performance, and this is in addition to the receivers with anti-interfere performance in the spark ignition process. These Plus series receivers are also with both ACCESS and ACCST D16 modes, where the RF protocol is smart matched during the binding process on the radio. With the Black-Box function, some basic flight data like Power Signal related can be well preserved.. The Archer Plus R8 8 high-precision PWM channel receivers support full-range signal strength with dual detachable antennas and guarantee optimal antenna reception and range. The R8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices XACT servos, ADV Sensors, etc. as well as simplifying the builds setup.. The Archer Plus R8 8 high-precision PWM channel receivers support full-range signal strength with dual detachable antennas and guarantee optimal antenna reception and range. The R8 can be used as a Primary receiver in a redundant solution by wiring the SBUS In port and connecting to any other FrSky receiver equipped with an SBUS Out port. With the FBUS protocol, the Archer Plus series receivers can open up the possibility of seamlessly pairing with multiple telemetry devices XACT servos, ADV Sensors, etc. as well as simplifying the builds setup.. Supports signal redundancy SBUS In Full control range with telemetry S.Port or FBUS Over-The-Air OTA FW update External batterydevice voltage detection. Number of Channels 824 channels 8 High-precision PWM 16 SBUS channels Mode 8 High-precision PWM 24 SBUS channels Mode Operating Voltage Range 3.5 -10V Operating Current 65mA5V Operating Range 2km Full rangeRange may vary based on local conditions. Voltage Measurement Range via AIN2 External device 0-35V Battery Voltage Divider Ratio 110 Antenna connector IPEX4 Compatibility FrSky 2.4GHz ACCESS ACCST D16 capable transmitters.

The FrSky RemoteNFC Panel is a convenient tool that can safely control the power supply by utilizing a set switch on the radio to enabledisable the power connection remotely, or by the switchboard using NFC Panel while having the device RB unit, PowerSwitch, etc. with battery always connected.. This kit is composed of a RemoteNFC Panel base and NFC Key. Quickly combine all parts, now you can simply utilize the NFC key or the functional switch to manage the power supply without having to plug inunplug the battery. Supports remote power control by ETHOS radios Safe and contactless NFC switch OnOff design. Avoid the hassle of plugging in unplugging the battery The power is enabled by default while the NFC base panel is connected. Dimension 33196.2mmLWH Weight 10.2g Operating Voltage Range 4-38V.

Hardware Enhanced ergonomic designed case with comfortable rounded hand grips 4 Standard Trims with additional 2 extra trims Integrate flash storage but also keep the internal TF card slot Easy-to-reach top switches and sliders With a flat base to improve stability when standing the radio Color Touch-Screen Displays. High-Precision Hall-Sensor Gimbals with a Metal Panel 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear Lite Type External Module Bay Haptic Vibration Alerts and Voice Speech Outputs Supports Recharge System for 2S Li-ion Battery USB Type-C Interface High-speed PARA Wireless Training System. TD-ISRM RF Module Built-in TD 900M2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16 Mode Compatible with ACCST Receivers with D16 V2 or later FW 2.4GACCESS Mode Compatible with ACCESS Receivers 900M ACCESS Mode Compatible with ACCESS R9 868915MHz Receivers Capable of simultaneous working under ACCESS mode. 2.4G 900M TD Mode Compatible with TD Receivers Long-range control and super-low latency with telemetry. ETHOS System Clear and Intuitive UI Design Supports Dual Operation Modes of Radio Display Touch and Non-Touch Supports Multi-Language Switching HardwareSoftware Version and Factory Version Detection Supports running LUA Scripts.

Ready to fly kit, power on and start flying. Perfect for beginners. Flexible plastic for durability. Real 5.8G FPV view. Controller and Goggles included.

Built-in TD 900M2.4G Dual-Band Internal RF Module Supports Multiple Working Modes 2.4G ACCST D16Mode Compatible with ACCST Receivers with D16 V2 or later FW 2.4G ACCESSMode Compatible with ACCESS Receivers 900M ACCESSMode Compatible with ACCESS R9 868915MHz Receivers Capable of simultaneous working under ACCESS mode 2.4G 900M TD Mode Compatible with TD Receivers. Super-low latency and long-range control with telemetry Up to 50 to 100KM range and down to 4ms end-to-end latency 800480 Color Touch-Screen Displays 6 Quick-Mode Custom Buttons Front and 2 Momentary Buttons Rear Lite Type External Module Bay Built-in 6-axis Gyroscope Sensor All CNC Metal Trims, Knobs. Haptic Vibration Alerts and Voice Speech Outputs Supports SWR Indicator Warning Supports Recharge System for 2S Li-ion Battery USB Type-C Interface High-speed PARA Wireless Training System Compatible with FreeLink App3.0 Built-in Audio Wireless Module Compatible with Bluetooth Audio Device. All CNC High-Precision Hall-Sensor Gimbals with 10 Ball-Bearing, adjustable 45 to 60 stcik travel and 8 rotatable panel. ETHOS The more powerful, Flexible and Intuitive OS for your radio. Clear and Intuitive UI Design Supports Dual Operation Modes of Radio Display Touch and Non-Touch Supports Multi-Language Switching HardwareSoftware Version and Factory Version Detection Supports running LUA Scripts. Internal 900MHz2.4GHz Dual-Band External Module Bay The TD dual-band RF system combines both the features and advantages of FrSky 900MHz and 2.4GHz RF together in one system. The TD features real simultaneous dual-band long-range control with telemetry that achieves reliable end-to-end 4ms latency while maintaining a robust and high-quality signal link. The entire range of TD, ACCESS ACCST D16 receivers are supported. The built-in TANDEM RF System supports ACCESS and ACCST D16.

With RSSI PWM output 03.3V. Parallel two X8R to become a 16 channel receiver.. SmartPort enabled, realizing two-way full duplex transmission.. More number of channels 18ch from conventional channel outputs, 116ch from SBUS port,or combine two X8R to become a 16 channels receiver.. All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode. For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules..

Ergonomic and compact design MC12 Lite all-metal CNC digital hall sensor gimbal. Upgraded RF module with installed ACCESS protocolMore sensitive and lower latency down to 12msHigh-speed digital interface of internal and external modules Baud rate 450K. New PARA wireless training systemHigh-speed training system with a lower latencyCompatible with FrSky Free Link App and AirLink S via mobile devices. Supports wired training function High-efficiency quick-charge system. Supports motion sensing control Haptic vibration alerts and voice speech outputs.

X9 Lite is ACCESS protocol. The receivers should be upgraded to ACCESS protocol to work properly.. Includes 1 x Taranis X9 Lite Transmitter. Note batteries is NOT included, adaptive with replaceable 18650 button top Li-ion batteries.

X9 Lite is ACCESS protocol. The receivers should be upgraded to ACCESS protocol to work properly.. Compatibility ACCST D16 and ACCESS receivers. Supports wired training function G7 Noble potentiometer gimbal. Supports spectrum analyzer function Haptic vibration alerts and voice speech outputs. High-speed module digital interface Easily accessible battery compartment Batteries not included, adaptive with replaceable 18650 button top Li-ion batteries.

Compatibility ACCST D16 and ACCESS receivers Communication ProtocolACCST D16 ACCESS Feel Free to Choose. Classic Taranis form factor design Easy launch momentary button. Program navigation button High-speed module digital interface. Installed with ACCESS protocol Supports spectrum analyzer function. Supports SWR indicator warning G9D potentiometer gimbal Supports wired training function.

The upgraded switches and M9 hall sensor gimbals and features the addition of a PARA wireless trainer function. High-speed module digital interface Installed with ACCESS protocol Supports spectrum analyzer function Supports SWR indicator warning. Haptic vibration alerts and voice speech outputs Supports wired training function. Compatibility ACCST D16 and ACCESS receivers No D8 Mode. Faster baud rate and lower latency with a high-speed module digital interface..