Universal Compatibility The S3 is truly universal bracket-it fits round-head on-camera flashes such as the V100V1series, square-head on-camera flashes including the V860IIIII and TT350 series, and outdoor flashes such as the AD300, AD200, and AD100 series. One bracket for multiple flashes.. Bowens Mount Ready A standard Bowens mount accepts a wide range of light-shaping modifiers-from softboxes and reflectors to snoots - and lets you change them quickly and reliably.. Compact and Portable Redesigned to be smaller and lighter, the s3 is easier to carry than ever. lts integrated, one-piece design requires no assembly and is ready for immediate use.. Adjustable Flash Angle The s3 tilts 90, allowing easy adjustment of the flash angle for multi directional fill and more flexible lighting setups. This gives you greater control over how light falls on your subject.. Non-slip Silicone Pad A soft, built-in silicone pad with a grid texture firmly grips the flash, prevents slipping, dampens vibration, and protects your equipment from scratches-improving overall stability and safety during use.. Adjustable Mount for Broader Compatibility The clamp spacing is adjustable from 3.7-6.5cm to accommodate different sizes of on-camera and outdoors flashes..

Light Stand Bracket, Cold Shoe Mount with Umbrella Holder.. Cold Shoe Flash Bracket- Universal cold shoe mount on top for most DSLR Camera Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light. Notethis adapter does not fit Sony and Minolta flash. Umbrella Mount Bracket- A hole design for mounting urbrella. 180 Swivel joint allow vertical adjustment of the umbrella and flash light.. Light Stand Bracket- Comes with a 14 inch to 38 inch screw spigot, allow the light stand bracket to attach to a tripod or light stand.. Material Solid Metal body,abs knob..

Stronger adaptability Godox S2 Bracket is update version of S type bracket, fit more speedlites and flashes, such as Godox V1 round Head speedlite,V860II series, T685 series, TT350 series, and outdoor flashes AD series like AD400Pro, AD200Pro. Better quality and protection No-slip surface, mounts with light pressure, Will not scratch your equipment. More Angle S2 bracket can tilt stepless, suitable for different angles of lighting. It can be hold in hand or install on a light stand. More Compact and Portable S2 bracket has less size and is more compact and portable than the original S type bracket. Bowens Style Mount Bowens Mount compatible with many accessories such as softbox, standard reflector, Snoot, Umbrella etc.

S2 Upgraded VersionCompared to the S2, it features a smaller size and lighter weight. The improved bayonet button makes detaching accessories more convenient. The umbrella slot now uses screws to secure the shaft, replacing the previous spring-loaded clamp design, allowing the umbrella to lock in place more securely.. Built-in Cold Shoe Cable ManagementThe newly added cold shoe on top allows for direct trigger mounting. The integrated cable holder secures your sync cord neatly, preventing disconnections and organizing your setup.. Stable L-Type DesignFeatures a robust L-shaped structure that positions the flash closer to the stand's center of gravity, offering enhanced stability and security compared to traditional S-type brackets.. Wide Godox CompatibilitySecurely holds a wide range of Godox flashes and strobes, including the round-head V1, V860IIV860III, TT685 series, and AD series like AD200Pro, AD300Pro, and AD400Pro.. Bowens Mount for Creative ModifiersStandard Bowens mount lets you use a vast array of modifiers such as softboxes, snoots, and umbrellas to achieve professional lighting effects with your speedlite.. Durable Flexible Metal ConstructionMade with a full-metal body for lasting durability. It supports stepless tilt adjustment for precise lighting angles and can be handheld or mounted on a stand..

Universal Flash CompatibilityGodox S3 Bracket is update 2025 version of S2 type bracket, It fits round-head on-camera flashes, like the V1, V1Pro, V100 series, as well as square-head flashes, including the V850III, V860II, V860III and TT350, TT685II, TT600, TT520III, IT32 series. In addition, it perfectly accommodates outdoor flashes, such as the AD300Pro, AD200ProII, and AD100Pro series, making it the only bracket you need for multiple flash systems.. Adjustable Clamp Spacing 1.4 to 2.5To protect your equipment, the S3 flash bracket includes a soft, built-in silicone pad with a grid texture that firmly grips the flash, prevents slipping, and dampens vibration. The clamp spacing is also adjustable from 1.4 to 2.5 to accommodate different sizes of on-camera and outdoor flashes.. Tilts 90 for Flexible LightingThe Godox S3 flash holder features an adjustable tilt of 90, allowing you to easily control the flash angle for multi-directional fill and more flexible lighting setups. This gives you greater control over how light falls on your subject, expanding creative possibilities.. Redesigned to be smaller and lighterGodox S3 Speedlite Bracket is more portable and convenient to carry than the S1 or S2 Type Bracket. Its integrated, one-piece design eliminates the need for assembly, so it's ready for immediate use.. Bowens mount ReadyBuilt for versatility, the S3 features a standard Bowens mount that accepts a wide range of light-shaping modifiers, from softboxes and reflectors to snoots. This system allows for quick and reliable changes to your creative setup..

Universal Compatibility Godox S3 Bracket is update version of S2 S-type Bracket, it fits round-head on-camera flashes such as the V100V1 series square-head on-camera flashes including the TT685II, V860III and TT350 series and outdoor strobe flashes such as the AD300pro AD200pro AD100pro. Bowens Mount Accessible The standard Bowens mount accepts a wide range of light-shaping modifiers - from softboxes and reflectors to snoots, umbrellas, and lets you change them quickly and reliably to enhance your shooting experience. Compact and Portable Redesigned to be smaller and lighter than the S2 s-type bracket, the S3 is easier to carry than ever, weighs 15.8oz. Its integrated, one-piece design requires no assembly and is ready for immediate use. Adjustable Flash Angle The S3 tilts 90, ideal for multi-directional fill and more flexible lighting setups. Also the mounting clamp spacing is adjustable from 1.48 to 2.56 inch to accommodate different sizes of on-camera and outdoors flashes. Umbrella Hole Stand Mounting The S3 features an umbrella mount for quick installation of umbrellas. At the base, a light stand mount allows you to attach the bracket directly to a light stand, mounting hole in diameter.

Crafted for DurabilityConstructed from high-quality aluminum alloy, this flash bracket boasts exceptional durability and reliability. The robust design ensures that it can withstand the rigors of professional photography.. Versatile Dual Flash SupportWith the ability to accommodate two flash lights, this bracket offers unparalleled flexibility in lighting setups. The 180 rotation of the flash head and the 360 rotation of the ball attachments at the arm ends enable photographers to explore a wide range of lighting angles.. Flexibility in PositioningEquipped with adjustable angles, this flash bracket enables photographers to tailor the lighting to their specific preferences.. Compatibility VersatilityThe inclusion of a 14-inch screw on the tray ensures wide compatibility with various camera equipment, including Sony cameras.. Effortless Light ControlFeaturing tension hinges between each arm and at both ends, this camera bracket allows for effortless adjustment of the flash units. Whether separating the units for wider coverage or bringing them closer to the lens, photographers can easily manipulate the lighting setup to suit their specific photographic needs..

Dual Camera Mount with 14 standard screw hole to mount on tripod.. The straight flash bracket is with dual 14 Screws to support two cameras,flash units or mics at the same time.. Dimensions 10.6 x 1.2 x 0.2 inches LXWXH, Max Loading Capacity 6.6LB 3kg.. Adjustable Range From 3.7 to 9.3 inches.Long enough to hold two LED light at the same time. Please check the max adjustable range for your camera or accessories before order.. This Dual Camera Flash Mount Tripod Bracket is made of ALL Metal Aluminum, affixed with non-slip rubber pads to protect your camera flash and Mics from scratches and anti-slide..

Perfect for Smartphone Gimbals Vlogging or Videography --- with 3 cold shoe mounts extension, and 14'' screw, you can mount led video light and microphone on your gimbals compatible with DJI OM 4 OSMO Mobile 4 Zhiyun Smooth 4 Q X Hohem iSteady 3 Mobile Plus X Feiyu Vimble etc.. 3 cold shoe mounts enables many accessories combinations,such as LED light, microphone,doing what traditional single hot shoe can't do. To hold your accessories, the bracket is solidly built with a security lock to avoid easy falling-off, minimizing potential damage.. Great portability, easy to bring with you in any situation. If you're pressed for time in setting up tripod for accessories,or you don't want to be so fully-loaded for simple shootings,this bracket can make the optimal backup for holding your accessories.. With 14-20 on each Each of the screws has a 14-20 socket on the bottom, so another device such as a tripod can be attached.

Updated Version Flash Bracket- Swivel Light Stand Bracket, Standard Flash Cold Shoe Mount with Photography Umbrella Holder. Updated Parts Cold Shoe, Metal Locking Wheel.. Cold Shoe Bracket- Updated shoe mount on top to catch your flash speedlite without falling off Universal cold shoe mount for most DSLR Camera flashes speedlite light Nikon Canon Panasonic Yongnuo Neewer Godox flashes and more. It also works on monitor,ring light, video LED light, studio light,and other flashes rigs that come with a camera shoe type.. Light Stand Bracket- Comes with a 14 inch to 38 inch screw spigot, which can be converted by yourself, allow the light stand bracket to attach to a tripod or light stand. NoteYou will received the flash bracket with the convert screw. Release the screw to get 14 thread or 38 thread.. Umbrella Mount Bracket- A hole with locking screw in middle specially designed for holding umbrella. 180 Swivel joint allow vertical adjustment of the umbrella and flash light.. Metal Locking Wheel - We updated the material of the locking wheel from plastic to now metal, to better support the cold shoe mount on top without breaking. Material The flash bracket is made of whole aluminum alloy,durable and solid to use. Package includes 2pack of Chromlives flash bracket mounts..

Specifically Designed for Godox Flash the Godox S2 Speedlite Bracket has been improved upon the S-type bracket, providing compatibility with a wider range of flash models. It supports Godox V1 round head flash, V860II series, TT685II series, TT600 series, TT350 series, as well as outdoor flashes like AD400Pro, AD200Pro, AD200, AD100Pro, and AD300Pro, etc.. Adjustable to Fit for Most Flash BrandsNo pre-assembly or disassembly, it can be adjusted to fit for square speedlites with up to 2.75''x2.75'' By removing the bottom padding, it seamlessly accommodates round headed flashes with a diameter of up to 3.54'', and it will not scratch your equipment.. Maximize Flash w Bowens AccessoriesLight modifiers such as reflectors, softboxes, and snoots mount to the front of the bracket as they would on a Bowens flash head. The umbrella hole is strategically placed on the bracket, allowing separate control of the light head and umbrella angles for precise alignment with softboxes.. Compact and Portable DesignThe Godox S2 Bowens flash bracket offers a more compact and portable design compared to the original S-type bracket. It supports your flash either vertically or horizontally, and it can be hold in hand or install on a light stand.. Durable 100 Metal ConstructionConstructed with a full metal design, this bracket can support your flash both vertically and horizontally. It features a tilt capability of nearly 180 degrees and includes a 58-inch receiver for stand mounting..

Dual flash bracket with 14 standard screw to mount on dslr camera, led light, flash light and more. Perfect for your different demand on shooting.. Flash extension bar can be adjusted ranging from 4-18cm. Allowing to attach two devices at the same time. Please check the max adjustable range for your camera or accessories before order.. Dual camera mount for tripod comes with 14 and 38 thread holes at the center for tripod, light stand, handle grip, quick release plate and other support.. Dual hot shoe mount 14 screw with anti-slip rubber pad. Can protect your camera flash and led light from scratches and slipping.. Made of aluminum material, very sturdy and durable. Dimensions 20.3cm2.8cm0.5cm. Weight 72g..

Cold Shoe Bracket Extension Bar- Ideal for Vloggers and Content Creators This cold shoe bracket is a perfect solution to mount your microphone on Sony A6400 6300 6500 6000, Canon G7 X , Nikon Small Vlog Cameras, etc. And to mount your led video light on Gimbal Zhiyun Smooth 4 DJI Osmo Pocket and more.. Camera Tripod Bracket- Standard cold shoe type allows to attach additional microphone or small led video light, necessary for vlogging. Cold shoe mount extends to prevent obstruction to the flip-up screen of the mirrorless camera.. 14-20 Tripod Screw- Universal 14 screw on top for mounting on small camera, osmo pocket tripod adapter required, zhiyun gimbal and other devices with 14 screw hole. With 14 threaded hole on bottom for mounting on tripod.. Super Lightweight Portable,Perfect for Vlogging- Weight only 1.23oz with length 4.7inches and the adjustable range of hole from 2.95 to 3.33 inch, cause no extra burden even you use handheld tripod for video vlogging, recording, live streaming.. Sturdy Durable - Made of solid aluminum metal. Precise CNC machining and black anodized treatment for higher durability..

Universal Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 14 screw hole or hot shoe bracket.. Dual Cold Shoe Mount- 1x integrated cold shoe mount1x length adjustable cold shoe mount. Adjustable range 00.5. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.. Standard 14 Tripod Screws- Three 14 threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 14 tripod screw hole.. Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 14 male screw.And attach the extension bar mount to dslr camera via its hot shoe base.. Durable and Solid Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length 4.8, Net Weight63g2.22oz..

Dual Cold ShoesEquipped with two cold shoes to support multiple accessories simultaneously, providing flexibility in your setup.. Secure Mounting Ensure stability and reliability with the 14 screw hot shoe, providing a secure attachment for your equipment.. Expand Your Creativity Create dynamic and versatile camera setups by mounting accessories like lights, microphones, or monitors with ease.. Universal Compatibility The extension bar features two 14 screw holes and two 18 screw holes, making it compatible with a wide range of hot shoe devices.. Durable Construction Crafted from high-quality materials, this extension bar is built to withstand the demands of professional use, ensuring longevity and reliability..

Triple Cold Shoe for Enhanced Accessory Integration Equipped with three cold shoe ports, the camera cold shoe mount enables you to attach multiple accessories like video lights, monitors, and microphones simultaneously. This design enhances your setup versatility and boosts workflow efficiency for photography and videography. Cold Shoe Base with Universal 14 Screw Hole The triple cold shoe mount features a cold shoe base with a 14 screw hole, offering seamless compatibility with a variety of devices that have a cold shoe or 14 screw. Easily attach it to camera cages, extension bars, and other mounting systems for a flexible and adaptable setup. Expandable Mounting Options The cold shoe mount adapter with 14 screw hole center design, allowing you to attach magic arms or other accessories. This expandable design gives you the flexibility to customize your setup for any shooting scenario. Detachable Base for Modular Use The triple cold shoe mount features a detachable base that can be used independently or mounted onto a camera cage or extension bar using the screw hole. This modular design enhances versatility and functionality, allowing you to adapt the mount to your specific setup needs. Lightweight and Durable Aluminum Construction Crafted from high-quality aluminum alloy, the camera hot shoe mount weighs only 2.05 oz. Its lightweight yet durable design ensures long-lasting performance without adding unnecessary bulk to your gear. Whether you're in the studio or on location, the Mechrig Triple Cold Shoe Mount is the perfect addition to your setup, providing a reliable and efficient way to organize your accessories.

Compact Portable Design The Godox S3 flash bracket features a compact, one-piece integrated design that requires no assembly, weighing only 450g. Its lightweight build makes it easy to carry solution for photographers on the go, travel vloggers, and outdoor shooting.. Wide Godox Flash Compatibility Offers universal compatibility with a wide range of Godox speedlites and strobes, including the round-head V1V1Pro, popular V860IIV860III, compact TT350, and powerful AD200AD200Pro, AD300ProAD300Pro II, and AD100 series. One bracket meets diverse studio portrait and location lighting needs.. 90 Flexible Angle Adjustment Stable Mounting Features stepless tilt adjustment up to 90, allowing precise control over lighting angles for creative fill light, rim light, or bounce flash effects. The reinforced S-Type structure and secure cold shoe clamp provide a stable and reliable platform for both handheld use or light stand mounting.. Standard Bowens Mount Modifier Ready Equipped with a standard Bowens mount, it readily accepts a vast ecosystem of light shaping tools, from softboxes and umbrellas to snoots and beauty dishes, enabling you to quickly achieve professional lighting effects. The adjustable clamp width ensures a secure fit for various flash units.. User-Friendly Secure Setup Designed for quick and easy installation. The bracket provides a stable, non-slip platform with textured silicone pad that securely holds your circular or square head flash, protecting your gear from scratches and ensuring safety during dynamic photo sessions or video recordings..

Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 14 screw hole or hot shoe bracket.. Dual Cold Shoe Mount- 1x integrated cold shoe mount 1x length adjustable cold shoe mount. Adjustable range 3-3.5. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,. Standard 14 Tripod Screws- Three 14 threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 14 tripod screw hole.. Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 14 male screw.And attach the extension bar mount to dslr camera via its hot shoe base.. Durable and Solid Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length8, Net Weight3oz. If you have any question with your order,please feel free to contact us..

This tilt adapter can attach on your light stand, insert your photo umbrella and adjust your angle, insert your umbrella and adjust your mount, so it is at an optimum angle for getting great photographic results every time. It's a necessary gadget for portraits, interior and product photography.. Made of high quality nylon material, strong and durable.. It has teardrop shaped hole design and can lock your photo umbrellas.. Comes with a detachable 14 inch to 38 inch screw spigot, suitable for most LED lights, flash lights, and light stands.. 180 degree adjustment supports any angle of lighting and umbrella.

Compact Lightweight This photography and videography accessories kit contains a 9.825cm magic arm and a super clamp with a 0.6-215-52mm opening range for round poles like a tripod and flat surfaces like a desk, also can mount a backdrop. This equipment is lightweight and easy to carry inside your camera bag or backpack, it is ideal for studio and outdoor shooting and video recording. Easy Secure Mounting The articulating friction magic arm has double 14 screws, and the super clamp features 14 and 38 threads. The aluminum alloy and stainless steel metal material make it heavy duty and resistant against abrasion and rust. The maximum load capacity of the magic arm is 3.3lb1.5kg. The magic arm is designed with nonslip rubber cushions to prevent scratches on the mounted device and increase mounting stability. For Phone Action Camera The 14 screws on this adjustable arm and clamp kit for motorcyclebike handlebars connect accessories like a phone holder compatible with iPhone 16 15 Pro Max Plus 14 13 Mini Samsung Galaxy S22 S23 S24 Ultra, or an action camera mount adapter compatible with GoPro Hero 13 12 go pro 11 10 9 8 7 Black compatible with DJI Osmo Action 5 Pro 4 3 compatible with Insta360 x3 x4 insta 360 ace pro compatible with mevo start. Phone holder and adapter not included. Adjustable Shooting AngleTwo 360 degree ball heads of the magic arm can adjust to any angle based on your needs, providing a wide range of shooting horizons. One knob for locking all position. Wide Equipment Accessories Compatibility This photography gear can work with NEEWER GP-7 Action Camera Mount, GP-3 Phone Holder with Cold Shoe Adapter, F100F400 PROF500 Camera Field Monitor, Z1Z2NW760Z760 Speedlite Flash, RGB61RGB62RGB176-A1PL81 LED Video Light, TL96 Mini RGB Light Stick. Also compatible with SmallRig and NEEWER camera cages.

Versatile Mount This H-type camera bracket allows for mounting a flash or other accessories.. Flexible Positioning Design The bracket can swivel within 180 to position the mounted accessory at the desired angle.. Sturdy Construction Made from durable metal materials, this bracket provides a stable platform for your equipment.. Multiple Connection Points Features a cold shoe mount, 14 to 38 double screw adapters, and 14 and 38 threaded bottom sockets for attaching various accessories.. Universal Umbrella Shaft Socket There is an universal socket to insert an umbrella, and then you can secure it in the bracket..

This MF-DB Bracket from Godox is designed to hold two separately available MF12 flashes simultaneously. You can easily adjust each flash individually for optimal and precise positioning at different angles.. Mounts 2 Godox MF12 Flashes. Provides Adjustable Positioning.

The Godox S3 Speedlite Bracket is designed to fit a wide range of Godox flashes,including round-head V1V100V1Pro series, square-head V860IIV860III, TT350 series, and powerful outdoor flashes AD100AD200AD300 Series. One Bracket for Multiple Flashes.. ?Equipped with a standard Bowens mount, the S3 readily accepts a vast ecosystem of light-shaping toolsfrom softboxes to snootsenabling swift and reliable creative changesRedesigned to be smaller and lighter in a one-piece design, it requires no assembly and is ready to use straight out of your bag.. ? The Godox S3 tilts 90,allowing easy adjustment of the flash angle for multi-directionalfill and more flexible lighting setups. This gives you greater control over how light falls on your subject.. - - ?A built-in silicone pad with a grid texture firmly grips your flash, preventing slippage and dampening vibration. It also protects your equipment from scratches, ensuring stable and safe operation in any condition.. Featuring an adjustable clamp that expands from 3.7 to 6.5 cm, the S3 fits a broad range of on-camera and outdoor flashesmaking it a versatile mounting solution for various shooting scenarios..

3-Port Cold Shoe Mount with 14-20 Thread for Camera Cage Flash LED Monitor Microphone etc., Aluminum Camera Triple Cold Shoe Extension Bracket Compatible with Nikon, Canon, Sony..DSLRSLR. Triple Cold Shoe Expansion makes it much easier to access more photography equipment like microphones, fill lights, filed monitors, SSD Drive and other accessories. Fast attachment and decent design.. Made of solid aluminum and finely processed by CNC machine, lightweight and compact for carrying around. Durable, anti-corrosion and wear-resistant, which can maintain stable performance in a variety of harsh environments for a long time.. In each cold shoe socket, theres also a 14-20 or 38 screw thread for various accessories. The bottom cold shoe mount is removable and features with a 14 screw, to mount to tripods, monopods, selfie sticks, slides, gimbals...All 14 supports.. Wide Compatibility, its super versatile for connecting difference devices together to achieve professional photography work, for both video and photo shooting.. Package including 1 x 3 head cold shoe mount, 1 x hexagonal spanner. If you may have any questions, always feel free to contact us..

Bowens S-Type Mount is Compatible with all Bowens-mount accessories,such as Speedlite Flash ,Snoot ,Softbox ,Honeycomb, Reflector ,Beauty Dish. No pre-assembly post-disassembly. Smaller size, lighter weight, less space occupied. Reliable mounting firm clamp between 2 pieces of soft plastic, no pressure nor metal scratch to your speedlite. Unique speedlite mounting method the speedlite can be clamped firmly into the mount both horizontally and vertically. Mounting Method Speedlite body is hold and fixed by a big mount, which provides a stable and secure support..

Standard Shoe Adapter Compatiblecould be mounted on any camera accessories with 14 or M2.5 threaded holes, such as cage, cold shoe block, handle, plate, etc. Compatible with Cage for Sony ZV-E10, Such as Cage for Sony a6500 a6300 a6700, etc.. Wide ApplicationThis shoe adapter allows you to attach a Microphone, Flash, or LED, on accessories of cameras such as handles, cages, etc. Perfectly fit for all the accessories with 14-20 threaded holes.. Easy to UseSecure tightly via the two M2.5 screws, and a 14 thread hole for you to attach to the camera cage, plate, handles, or other accessories.. Sweet Ant-Off DesignWe specially offer two white arrows on the surface to show the mounting ways for your convenience. It comes with two secure bending bevels on one end to prevent accidental removal.. Product InformationPackage included 2 x 14-20 screw 4 x M2.5 Screws 2 x Hex spanner, 2 x Cold Shoe Mount. Diameter 25mm x 25mm 0.98x0.98 Material Aluminum Alloy.. NOTEThis Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For use on a cage, except for SmallRig Full Cage 1661, you only need to lock it on the cage via the included 14-20 screw, the M2.5 threaded is unnecessary..

Length of this dual bracket 8.2x 1.1 x 0.11 inches21 x 3 x 0.3 centimetersMade of aluminum alloy,precisely match the finish of cameras.. Designed with 14 inches and 38 inches screw hole Also comes with 2 pieces of 14 inches adapter screws New design it supports 2 cameras or flashes with hot shoe mount adapter at the same time Equipped with non-slip rubber pad, improving the anti-shake effects.. Single Dimensions8.2x 1.1 x 0.11 inches21 x 3 x 0.3 centimeters,Maximum loading capacity3 kilograms,2.25 ounces 63 grams weight.

This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,14 thread hole on top,and 14 tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows.. REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flashmonitor to slide off. Provides an economical way to do both horizontal and vertical flash.. UNIVERSAL 14 SCREW- Updated with an extra 14 screw hole between the two cold shoe mount for more configuration. Comes with a 14-20 thumb screw to connect your camera camcorder,action camera etc,. 14 threaded hole on the bottom of the thumb screw 14 threaded hole on the base plate to mount on a tripod,monopod and more.. ERGONOMICS HAND GRIP- Smart padded hand grip design for easy holding. Strong construction.. SOLID MADE- The l shape bracket is made of high quality aluminum metal and padded grip is made of hard plastic. Heavy duty and strong..

VERSATILE MOUNTING With one 14 thread and two 14 screws. Universal camera flash bracket designed to securely hold flash units and other photography accessories. ADJUSTABLE DESIGN Features multiple positioning options to achieve optimal lighting angles for professional photography. DURABLE CONSTRUCTION Made from CNC aluminum to provide stable support for your camera flash equipment. COMPATIBILITY Works with most standard hot shoe flash units and camera systems for versatile photography applications. PORTABLE SOLUTION Lightweight yet sturdy design makes it easy to carry and quick to set up for on-location shoots. The weight is 0.23lb 103g. Dimension 7.87x1.97x0.39 LWH. PACKAGE 1x flash bracket.

Widely usedWith one 14 screw hole and two 14 adapter screws. This plate is compatible with various tripod heads as it fits Arca Swiss standard.. Reliable qualityAnodized surface treatment provides a sleek, corrosion-resistant finish for reliable performance. High-quality aluminum alloy material, using CNC machining technology, quite solid and durable. Affixed with anti-slip rubber pads ensure balanced, stable and safe usage.. Portable ConvenientThe weight is 103g0.23lb. It is easy to carry anywhere, can support camera or flash at the same time.When you change the camera position from landscape mode to portrait mode, no need to slide or adjust the flash.. Product Size and PackingDimension 1601268mm Package includes 1x flash bracket.Please contact us if you need any help in any time..

Sturdy Durable Made of Aluminum Alloy with CNC precise and Oxidation treatment for higher durability Note The spacing of each cold shoe interface is 2.4, which is suitable for installing three general devices at the same time To prevent swing away, please keeping still shooting when you connect heavy devices. Universal 3 Cold Shoe Mount Works as an extension bar mount to attach 3 devices such as microphone, flash, led lights at the same time Besides, come with a 14 to shoe mount adapter, which allows this bracket to mount directly on DSLR cameras or any devices with 14 screw holes. Threaded Holes Features 2 pcs 38 thread holes with 8 pcs Arri locating and 8 pcs 14 screw holes and on the extention arm, easy to mount microphone, fill light and other corresponding accessories by magic arm. Details of the Upgrade Comes with 2 secure bending bevels on one end, the arrowheads on the cold shoe shows the direction to mount additional accessories Cold shoe mount base adapter with special corner design can prevent devices from slipping. Great Portability Weight only 2.6 oz with length 5.8 in Easy to bring with you in any situation If you're pressed for time in setting up tripod for accessories, or you don't want to be so fully-loaded for simple shootings, this bracket can make the optimal backup for holding your accessories.

180 degree rotating flash arm with additional 1 height adjustment. Comfortable foam hand grip. Perfectly balanced design. Sturdy Aluminum construction. Tripod mountable.

Portable and flexibilityFlash Handheld Grip FG-100 is a rugged and portable grip and meeting various outdoor or indoor shooting needs. Amazing shooting accessory for home, travel, birthday party, honeymoon, banquet with recording the happy and unforgettable moments. Also a nice gifts for your friends and family.. Ergonomics Design Handle GripErgonomic design eases your wrist in a long-time shooting. Mounted on the 15tilted upper surface, the light can illuminated downwards naturally,which avoids strain or even injury caused by bending your wrist down constantly.. Anti-slip Groove DesignFeaturing anti-skid grooves,the grip can be held firmly and comfortably.. Extensive compatibilityWith a 14 screw, It compatible with Godox AD100pro, AD200Ppro,AD300pro and other outdoor flashes and LED video lights ,Cameras or camcorder and Action cameras.. Multifunctional Use14 threaded hole on the bottom enables you to mount it on the light stand, boom pole and more. The hand strap prevents damage caused by dropping..

The new Godox S-type Speedlite Bracket takes horizontal flash head mounting another step further though, by clamping the flash head, rather than strapping it in place as the Phottix bracket does. As an optimized patented product, Godox S-type speedlite bracket is superior all-in-one, smaller size, portable design, no assemblydisassembly, and easy mounting system. Quickly add Bowens-mount lighting accessories to get creative lighting effects.. Features No pre-assembly post-disassembly. Smaller size, lighter weight, less occupied space.

Special Design- This flash bracket can attach on your light stand and flash light, insert your photography umbrella or Softbox and adjust your angle and mount, so it is at an optimum angle for getting great photographic results. It's a necessary gadget for portraits, interior and product photography.. UmbrellaSoftbox Mount Bracket- A hole with locking screw in middle specially designed for holding umbrella or softbox. Allows 180 swivel to adjust the vertical of the umbrella and flash light.. 14 To 38 ScrewNut Adapter- The detachable 14 to 38 screw socket at the bottom, which can be converted by yourself, allow the U shape flash bracket to attach to a tripod or light stand. Note Received the flash bracket with the convert screw. Release the screw to get 14 thread or 38 thread.. Cold Shoe Mount Bracket- Come with a cold shoe mount on top design fits DSLR camera flash speedlites or video LED light, studio light, monitor, ring light, etc.. Durable- The flash bracket is made of whole aluminum alloy,durable and solid to use..

This camera cold shoe mount is a quick and simple solution to mount your mic or flash light together with your camera. Simple and Elegant Minimalist DesignSimple design with 14-20 screw and numbers of 14-20 screw holes on it for mounting solutions. Will not add much weight to your camera. Solid and Sturdy Made of all metal aluminum alloy, solid and safeguarding your device all the time. 12.5cm4.9 inch Camera Extension Bracket for FlashMic4.9 cold shoe mount extension to prevent obstruction to the flip-up screen of the mirrorless camera.. With Rubber Gasket It protects your camera from being scratched.

MULTIFUNCTIONAL COMBINATION - KF CONCEPT 9.8 Inch magic arm clamp kit can be used with a variety of camera accessories. It meets diverse creative needs across multiple angles, enabling exploration of varied shooting perspectives.. 360 ADJUSTABLE MAGIC ARM - Magic arm camera mount 360 dual ball head design for better flexibility, easily adjust the device in the ideal position. Both ends of the magic arm are equipped with 14 screws for attaching camera cages, flash, microphone, webcam, monitor, DSLRs and action camera, compatible with GoproDJIInsta360Adapter not included.. FLEXIBILITY IN USE - Solve multi-scene fixing needs. The magic arm with super clamp can be mounted on poles, posts, tripods, tables. Easily meets the fixing needs of poles or surfaces of different thicknesses. Opening range is 15mm-55mm.. SUPERIOR QUALITY - Magic arm with clamp all metal design, sturdy and durable. Anti-slip design with 2 cushion pads and round rubber pad on the magic arm kit. The cushions increase friction and protect the device and clamping area from wear and tear.. EASY TO ADJUSTABLE - The knob screw allows simultaneous tensioning and loosening of the magic arm. Loosen the knob to enable 360 rotation of the ball head, or tighten it to lock the head and joint positions. NOTE The magic arm is suitable for static or mildly dynamic scenarios with a maximum load capacity of 2 kg. Avoid using it with heavy cameras during vigorous movement..

Made of high quality material which is sturdy, lightweight and durable to use.. Fits on the top of most standard light stands or tripods.. Equipped with umbrella holder at the base of the hot shoe mount.. Holds any standard flash. Screw at the base of the hot shoe mount secures the flash in place. Hot shoe mount can be disassembled.. Easy to adjust the angle of the flash, 180 high angle adjustment, make good use of flash to light or fill light..

MaterialL bracket camera mount is made of aluminum and rubber, anti-oxidation to meet your needs.. DurableStrong and wear-resistant,anti-skid glue and can be used for a long timecamera mount provides a suitable distance to reduce shadows and red eyes, and the unique rubber handle increases comfort.. Small VolumeFlash bracket is small in size and easy to carry, and can firmly fix the camera accessories, which is convenient for live broadcasttravelinterview.. Comfortable for gripCamera flash bracket,ergonomic designed handle is perfect and comfortable for grip.. Widely use L-Shape hand grip design for more configuration easy holding, Attach your DSLR Cameras Video Camcorders and Flash to the hand grip, suitable for Outdoor Indoor filming, Product photograph, Video Shooting..

VERSATILE CAMERA ACCESSORY Enhance your photography setup with multiple mounting options. LIGHTWEIGHT YET STURDY Made of quality material for durability without added weight. COMFORTABLE HANDLING Ergonomic L-shape design allows for easy vertical or horizontal. ENHANCED FUNCTIONALITY Combine flash with other accessories for more creative photography. IDEAL FOR PHOTO ENTHUSIASTS for photography lovers looking to expand their gear.

This camera cold shoe mount is a quick and simple solution to mount your mic, flash light, phone holder, and action camera like for DJI Pocket 3 next to your camera. Simple and Elegant Minimalist DesignSimple design with 14-20 screw and numbers of 14-20 screw holes on it for mounting solutions. Will not add much weight to your camera. Solid and Sturdy Made of all metal aluminum alloy, solid and safeguarding your device all the time. 14cm5.5 inch Camera Extension Bracket for FlashMic5.5 cold shoe mount extension to prevent obstruction to the flip-up screen of the mirrorless camera. Leave more space and if you mount a pocket 3 on it, the pocket 3's lens won't see the camera body due to the enough long space. With Rubber Gasket It protects your camera from being scratched.

Suitable for digital camera, camcorder and DV without hot shoe mount.With 14 screw hole and 2pcs 14 adapter screws, easy to tighten or loosen.. When you change the camera position from landscape mode to portrait mode, no need to slide or adjust the flash.. CNC integrated processing, non - casting oxidation treatment of outer layer.. Compacti size, easy to carry anywhere, can support camera or flash at the same time.. If you have any doubts about this product, please send a message or email for us. And we have a professional after-sales team to answer your questions within 24 hours..

Product Includes a kit containing 12 L-shaped brackets and flash baffles, complete with bolts and hardware, specifically designed for asphalt shingle and composite tile roofs, compatible with most common photovoltaic rails, meeting the installation needs of residential solar modules. Product Material both the flash baffles and L-shaped brackets are made of 100 aluminum alloy, lightweight yet robust and durable, resistant to corrosion and aging, ensuring long-term stable operation of the photovoltaic system. Waterproof Protection each bracket is equipped with a waterproof EPDM rubber gasket, working in conjunction with the aluminum flash baffle to effectively prevent rainwater penetration into the roof, especially suitable for asphalt shingle roofs, ensuring the safety of the roof and system. Easy Installation designed for both convenience and reliability, it can be quickly installed on sloping asphalt shingle or composite tile roofs, no additional tools are required for fixing, reducing construction time and costs, suitable for DIY or professional installation. Reliable Load Capacity each bracket can withstand 571 lbs of upward force and 536 lbs of downward force, ensures the photovoltaic modules remain stable and safe under various wind pressure and severe weather conditions.

Designed exclusively for single-contact micro flashes, this bracket features a dedicated single contact hot shoe that provides a secure and reliable connection for compatible Godox flashes like the MF12 series. It delivers the trigger signal without the complexity of multi-pin TTL contacts, ensuring perfect compatibility and a streamlined setup.. Engineered with precision for lightweight gear. The bracket is rigorously tested to safely and stably support flashes weighing up to 78 grams, making it the ideal partner for the Godox MF12 and other similarly sized, ultra-compact flash units. Always check your flash's weight to ensure a perfect match.. Unmatched portability for the on-the-go photographer. Featuring an innovative foldable design, this bracket can be collapsed into a flat, compact form factor that easily fits in any camera bag pouch. Its the perfect solution for macro, product, and travel photographers who need a reliable flash mount without the bulk.. Solve hot shoe crowding and prevent damage. This riser elevates your micro flash away from the camera body, effectively preventing collisions with the camera's eyecup or settings dials. It also frees up the valuable main hot shoe for other accessories like a wireless microphone or a larger TTL flash trigger.. Built for stability and longevity. Constructed from a high-strength composite material, this bracket offers an excellent balance of lightweight portability and rigid support. It holds your flash firmly in place during a shoot, giving you the confidence to focus on capturing the perfect shot..

Dual Mount Versatility This straight flash stand is designed for versatile expansion, allowing you to mount two cameras, two flashes, or combine photography accessories such as fill lights and microphones. It's ideal for dual-camera shooting, live streaming, vlogging, and studio shooting, where multiple devices are needed. Reliable Material This camera flash stand is made of plastic and can reliably support DSLR cameras, LED panels, flashes, and other equipment. Its slim design ensures durability for studio use while also being easy to carry, making it suitable for outdoor shooting and video projects. Universal Compatibility This plastic photography light stand features standard 14-inch screw holes for easy attachment of tripods, light stands, cameras, as well as clip-on lights, phone holders, and microphones, making it a central hub for your shooting equipment. Convenient Portability Measuring approximately 10 inches in length, this dual flash bracket is designed for easy carrying and storage. Its compact size makes it an indispensable tool for photographers and videographers who need reliable, multi-purpose mounting solutions for diverse occasions, from professional studio sessions to outdoor vlogging and live broadcasting setups. Practical Design Details The dual camera mount features adjustable mounting points with a hot shoe distance ranging from 3.5 to 9 inches, allowing for flexible adaptation to accessories of different sizes. This facilitates the storage and organization of equipment such as microphones, thereby improving work efficiency.

This tilt adapter can attach on your light stand, insert your photo umbrella and adjust your angle, insert your umbrella and adjust your mount, so it is at an optimum angle for getting great photographic results every time. It's a necessary gadget for portraits, interior and product photography.. Comes with a detachable 14 inch to 38 inch Innovative Flat Head screw spigot, Stronger force surface can make the product more stable. Suitable for most LED lights, flash lights, and light stands.. Made of high quality nylon material, strong and durable.. 180 degree adjustment supports any angle of lighting and umbrella.. It has teardrop shaped hole design and can lock your photo umbrellas..

Aluminum Alloy Build Dual hot shoe extension bracket is crafted from aluminium alloy materials for a camera. L flash bracket is a great choice for various photographic applications on a tripod. Camera flash bracket offers a balance of portability and sturdiness for a photographer. Dual Hot Shoes Hot shoe flash bracket features two hot shoes on the top surface of the bar. Flash shoe bracket provides exceptional versatility for a photographer with multiple flashes. Hot shoe mount bracket allows for multiple configurations for mounting flashes and accessories. You mount two flashes on the same bracket for even lighting. Standard 14 Thread Microphone bracket has a standard 14 thread on the bottom for tripod mounting. Led light bracket ensures compatibility with a wide range of cameras and camcorders. Hot shoe extension bar mount provides stability and flexibility for different shooting styles in a studio. The thread fits a tripod screw on a stand. Horizontal Vertical Use Dual hot shoe flash bracket is engineered for both horizontal and vertical orientations on a camera. Dual mount flash bracket provides a secure and ergonomic grip in either position for video. Long dual camera mount helps you find images and video from various angles comfortably. You rotate the camera on the bracket for portrait shots. Photography Enthusiast Tool Dual camera mount flash bracket is designed with photography enthusiasts in mind for events. Shoe extension mount is an essential tool for capturing stunning images and video on location. Cold shoe extension flash bracket is a valuable addition to any photographer kit for weddings. The bracket holds a flash unit off to the side of the camera. The bracket adjusts for portrait or landscape shots on a hike.

Godox Softbox Kit List1 Godox 32x32 Softbox 1 S2 Flash Bracket 1 Outer Diffuser 1 Inner Diffuser 1 Carrying Bag 1 Storage Bag 1 Clean Cloth.. Professional Photography SoftboxThe foldable softbox provides good reflective performance in a relatively closed environment. It helps diffuse the harsh flashes, removes shadows, and maintains soft, even lighting.. S2 Speedlite BracketCompatible with Bowens-Mount Accessories, such as photography softbox, standard reflector, Reflector, Umbrella, etc. Made of Impact Resistant ABS Plastic, Precise Stepless Tilt Control.. Easy to OperateNo Pre-assembly, mount with Light Pressure, Quickly add Bowens-mount lighting accessories to get creative lighting effects. The foldable design allows you to carry it anytime.. Applicable widelyCompatible with Godox Flash Godox V1, Godox AD200Pro, Godox AD400Pro, and Godox V860II TT685II Series, etc. It is suitable for different scenes, with two soft light cloths to meet different photography needs..

STRONGER THAN EVER MagMod re-engineered the popular MagShoe to support the larger, heavier MagBox PRO Octa and Grid Softboxes. The new MagShoe v2 features a gold anodized color top.. SECURES OFF-CAMERA FLASHES AND LIGHT MODIFIERS The ergonomic and universal cold shoe bracket offers a firm locking mechanism that keeps your Speedlight flash, umbrella modifier, and large softbox in place. It includes a 14-20 adapter for flashes like the AD200 or mounting LED light panels and GoPro cameras.. LOCKS IN FAST Simply slide in your flash, turn the lock, and you are good to go. You don't have to waste time or deal with small screws and nuts.. ADJUST THE ANGLE IN ANY WAY The large squeezable button adjusts the MagShoe's position and quickly locks it in any angle. You can even tilt the MagBox PRO at a deep angle with one hand.. EASY TO HANDLE The ergonomic pistol grip and silky smooth silicone coating are gentle on your hands when tightening the MagShoe to a stand or attaching an umbrella. The MagShoe v2 feels just right in your hand..

Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder.. Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe.. A hole with locking screw in middle specially designed for holding umbrella.. Easy Adjustment. This Flash bracket is with 180 vertical and 360 horizontal adjustment to allow to position the umbrella and flash in different angle.. Comes with 14 inch to 38 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 14-20 or 38-16 male thread. Note This flash bracket is not ideal for sony minolta godox shoe system..

The dual L-shaped brackets can combine in multiple forms to apply for different requirements of cameras and flash speedlite.. This is a L-shape bracket ,very stable and long-lasting,can detachable and assemble. Adopt moveable head to flexibly position the flash horizontally or in vertical direction.. Comes with 14 screw holes and 4 screw adapter to mount your camera, speedlite with tripod, lightstand or other accessories.. L-shape brackets are all equipped with non-slip rubber pad to hold the camera or speedlite firmly The L-shaped brackets are all made of aluminum alloy,very solid and long-lasting..

Ingenious designEach flash bracket supports TWO cameras or flash units by hot shoe mount adapter at the same time.. Superior QualityFlash bracket mount made of durable aluminum alloy material, portable and easy to carry, solid enough to minimize potential damage.. DimensionsDual flash bracket size is 205mmL30mmW3mmH. Appropriate size can fully meet the needs of multiple devices shooting at the same time.. Easy to InstallMax load capacity 5kg, with 14''and 38''thread hole in the middle can be adjusted from 4-18cm for installation of light stand, handle, quick release plate and other photography accessories.. Wide ApplicationCompatible with camcorder, DSLR camera, video light, fill light, good for wedding, birthday party, news spot and more..

Versatile Handle for Universal Camera Cage, could be used for most camera cages with 14 hole and cameras. One cold shoe mount on top to add additional microphone, light or other accessories. Triple Secure with Three lock design There is a hidden wrench placement slot on the bottom of the wood handle grip, Super easy to carry.. Triple Secure with Three lock design There is a hidden wrench placement slot on the bottom of the wood handle grip, Super easy to carry.. Comfortable Hold Feeling --- Could be used for camera and smartphone stable video shooting, Layers of Fine Grinding and Polishing. Traditional Wood design mix with HiTech..

Size and Material The length of the straight flash Bracket is 30.3cm11.8in. Compared with similar regular products, this camera bracket is longer, flash extension bracket made of aluminum alloy, sturdy and durable, with strong load-bearing capacity.. Ingenious designThere are standard 14-inch and 38-inch screw holes in the middle of the dual flash bracket, which can be installed on a camera or a light stand.. Easy to carry The size of the dual camera mount is convenient to carry, suitable for use in various occasions, and is an indispensable important equipment for photographers.. AdvantageCompared with other similar dual camera mount that can only install one camera and one flash, our dual flash bracket can install two cameras and two flashes or two other photography accessories at the same time, ensure balance to meet different shooting needs.. Application Flash bracket meets the needs of multi-functional expansion, suitable for dual camera shooting, or match with video lights, fill lights, microphones etc at the same time..

Smoothly Flips Flash Unit 90 Keeps Flash Unit Always Above the Lens. Eliminates Red-eye and Side Shadows Compatible with Most Cameras and Flashes. Bottom Mount for Tripod Use Sturdy, Lightweight Aluminum Design. Soft Rubber Hand Grip. 5-Year Limited Manufacture Warranty.

Eliminates Red-Eye Side Shadows Smoothly Flips Camera 90 Degrees Compact Form Factor. Compatible with Most Cameras Flashes Multiple Mounting Holes for Accessories Adjustable Cold Shoe. Bottom 14-20 Mount for Using Tripod Comfortable, Soft Hand-Grip Sturdy Lightweight Aluminum Construction. 5-Year Limited Warranty.