Compatible with Tesla Model Y 2020-2024 Front Left.. OEM149418500B,149416100B, 1494185 00 B,1494161 00 B,1494161-00-B,1494185-00-B.. Installation MethodThe fender trim come with clips,direct replacement,no drilling.. Note Please confirm the installation positions of the fender trimsfront or rear, vehicle production year, and OEM in advance to make sure the fender trim is suitable for your vehicle.. Product advantages Easy to install,one-person operation.Difficult to deform or break, with a long service life. Protects the vehicle body from mud, stones and debris while driving..

High Quality MaterialFender flare rubber seal is made of high quality EPDM rubber material, non-toxic, thick and flexible, resistant to compression deformation and aging, with strong and long-lasting sealing performance. Fender flares edge trim can be used under various high or low temperature conditions. Excellent ProtectionFender flares edge trim is designed specifically for car fenders, fits tightly to car fenders without leaving annoying gaps. It can isolate vibration, reduce friction, protect car paint surface, and prevent graveldebris from getting stuck in the gaps of car body. Clean LinesRubber fender adopts a double-edged design with a length of 33 feet. The design of T-shaped wiper can closely fit edge of mudguard. Enhance sealing to prevent waterdust from entering. Improve overall appearance of your car, creating clean lines between body and flare. Easy to InstallFender edge trim is easy to install. Please keep the fender surface neat and dry before installation, then you can peel off the red protective film, stick the trim on fender along seal and finally subtract the excess.It should be noted that seal cannot be removed or washed within 24 hours. Wide ApplicationSuitable for most models of fenders on the market, such as cars, trucks, SUVs, VAN, RV, vans, off-road vehicles, etc. It can effectively extend the service life of the mudguard. Note Not suitable for fenders with right-angled edges, curved edges and thick edges.

Packaging quantity 2pcs front wheel well trim Left driver and right passenger sides. OEM numberOEM57010621AD,57010620AD.partslinkCH1290112,CH1291112. CompatibilityFIONE fender flares compatible with Dodge Durango 2011-2018. Easy installationThe wheels molding trim to come with holes and fixed buckles, which can be directly installed without drilling holes.. If you have any questions after receiving the goods, please contact us on time..

Packaging Quantity 1x Right passenger sides front wheel arch fender flares. OEM Number OEM5XB64LXHAA,partslinkCH1291113. Compatibility FIONE fender flares compatible with Jeep Renegade 2015 2016 2017 2018 2019 2020 2021 2022. Installation Design The wheel well trims to come with holes and fixed buckles, non-destructive installation, no damage to the vehicle. Durable Material Made from high-quality, impact-resistant ABS plastic for long-lasting performance in various weather conditions..

1pcs front wheel fener trim for right passenger side. FIONE fender flares compatible with Dodge Durango 2011-2018. The wheels molding trim to come with holes and fixed buckles, which can be directly installed without drilling holes.. Oem57010620AD,57010620AE,57010620AC.partslinkch1291112.

PROVIDE PROTECTION This flare trim is installed between the fender flare and the vehicles body, which can isolate vibration, reduce friction, protect the car paint, and eliminate the risk of pinching rocks and debris between the fender flare and the body of your vehicle.. CLEAN LINES Wiper style shape, adding extra coverage to your vehicle, creates a clean line between the vehicles body and the flare.. HIGH PERFORMANCE This fender flare edge trim is made of EPDM rubber material with excellent performance, ozone resistant, weather-resistant, very flexible.. SAVE MONEY 30 FEET length, enough to cover all 4 fender flares. No need re-order to finish the job, save your money.. EASY TO INSTALL This fender flare trim comes in acrylic automotive-grade adhesive tape.Strong bonding and easy installation..

Applicable ModelsThe right front wheel fender flares are compatible with Tesla Model X 2023 2024.. Durable MaterialThe wheel arch for model x is made of ABS material, which is crack resistant, wear resistant and not easy to deform, and can effectively prevent the rim or the car body from being scratched.. Enhanced AppearanceThe smooth lines and fine workmanship of the wheel fender for model x can be used as the decorative effect of the body.. Easy to InstallThere is no need to drill or cut, the original curvature is the same as the original height, and the installation can be replaced directly.. After-Sales ServiceWe promises the fender flare for model x 30 days for return or replacement without reason.If you have any problems or questions, please send a message to us and we will respond in time..

OEM OEM1MP38RXFAE,1MP39RXFAE.Partslink CH1291106 CH1290106. Packaging Quantity A set of 2, including a pair of fender trim molding left and right. Compatibility FIONE fender flares compatible with Jeep Grand Cherokee 2011 2012 2013 2014 2015 2016, Please confirm your car models before purchasing. DesignFIONE wheels molding trim to comply with hydrodynamic standards, which can reduce the effect of wind resistance coefficient and reduce friction.. Worry-free returns DOTSAE certification FIONE wheel fender flares have been strictly tested before leaving the factory, and the quality standards meet or exceed DOT SAE standards. In addition, there is a 30-day free return and exchange service, so you don't need to worry about any quality problems.

Fitment Compatible with Nissan Rogue 2014-2019 2.0L2.5L l4, Front Left Right Side Fender Molding Trim. Manufacturer Part Number 638609TA1A, NI1291101, 638619TA1A, NI1290101. FeatureExcellent workmanship and strict inspection before leaving the factory are necessary conditions for product reliability, stability and long-term use. All products have been tested on the machine before leaving the factory. We will check the products again before shipping for you. Attention pleasePlease read the product description carefully before purchasing to make sure it is suitable for your car.. About usCommunication Is The Best Way To Solve The Problem. If You Have Any Problems After Purchasing, Please Contact Us In Time, Before Opening Return Or Case..

Abundant Quantity Comprehensive Sizing This 260-piece automotive clips and fasteners kit includes 12 of the most popular sizes of bumper clips and car plastic rivets. Ideal for a wide range of car repair, modification, and maintenance tasks, this set ensures you have the right bumper clips and car clips for any jobfrom minor fixes to major overhauls.. Superior-Quality Materials Made from high-grade plastic, these automotive clips and fasteners are built to resist wear, corrosion, and heat. The durable construction ensures long-lasting performance under various driving conditions, making these car clips a reliable choice for any automotive project.. Wide Vehicle Compatibility Engineered to fit a broad range of makes and models, this push retainer kit is compatible with GM, Ford, Toyota, Honda, Chrysler, and more. Whether used as door trim panel clips or fender clips, these automotive clips adapt seamlessly to your vehicles requirements.. Cost-Saving Easy Installation Save time and money with this complete kit. It includes 5 fastener removers for easy extraction of old car clips, and the new bumper clips are designed for quick, secure installationeven for beginners no longer need to go to a auto repair shop.. Convenient Storage Organization The kit comes neatly organized in a compact plastic box with labeled compartments, making it easy to store and identify each type of automotive clip or bumper clip. Keep your car clips accessible in your garage or vehicle, ready whenever you need them..

Premium Durability Our flare acts as a reliable shield, deflecting mud, stones, and debris kicked up from the road to help maintain your vehicle's pristine condition. It is constructed from a resilient material to resist impact and avoid deformation, ensuring long-lasting performance. Compatible With 2020-2024 Tesla Model Y. Please confirm the installation positions of the fender trimsfront or rear in advance to make sure the fender trim is suitable for your vehicle. OE Number 149418600B 149416200B 1494186-00-B 1494162-00-B. Please check the part numbers whether it suits your vehicle before purchasing. Durable All-Weather Performance Crafted from high-quality, weather-resistant materials, this trim is built to endure harsh conditions without fading or cracking. It provides dependable protection from moisture, UV rays, and extreme temperatures throughout the seasons. Effortless Direct Fit Installation This fender trim comes with clips for easy installation, requiring no drilling and suitable for one-person operation. Make sure to confirm the installation position in advance to ensure it fits your vehicle.

Compatibility - Compatible with 2014-2020 Nissan Rogue. Reference Part Number 638609TA1A, NI1291101, 638619TA1A, NI1290101. Heavy Duty Material - Special Injection Molding process ensures enhanced durability, flexibility and strength. To protect your wheel from scratches, mud or other outer damage.. Hardcore - Crucial tire coverage keeps dirt and debris off your pickup, maximum tire coverage for whatever the road throws at you and keeps you legal when running larger wheel tire packages.. Sturdy and Durable - Effectively protects vehicle from mud, scratches, sand and other external damage.. Easy Installation - No cutting or trimming needed some drilling may be required. Professional installation is highly recommended..

Universal Fit Kit - 6 Popular Sizes Car Clips, Perfect for Door Trims, Radiator Shields, Fenders, Bumpers Splash Guards Ideal as Bumper Clips. Premium Quality These Plastic Rivets Are Made of Nylon Material, Boasting Sturdy Construction and Long-Lasting DurabilityThey Wont Break or Crack During Use. Save Time Money 120-Piece Automotive Clips Sufficient for Auto Parts Replacement, No Need to Run to Auto Parts Stores for Separate Fasteners. Included Rivet Remover Easily Quickly Remove Door Panels Push Pin Clips Without Damage, Making Access to Tight Areas a Breeze. Wide Compatibility Fits Ford, GM, Toyota, Honda Most Other Brands Ideal for Replacing Door Trim Panels, Radiator Shields, Fenders More, Perfect as Retainer Clips.

Compatible for front right and left fender-flares replacement for Chero-kee 2014-2017. Sturdy material front right and left fender-flares replacement is made of good-quality lightweight plastic material that is sturdy. Ensuring it withstands various weather conditions. Easy to install easy installation, good fits your car, suitable for replacing your broken parts, professional installation is strongly recommended. Seamless integration finished with a black texture, fender-flares can be well integrated with your car. It complements the design of your car and gives it a sleek and stylish look. Package included 2 x fender-flares as the picture shown.

COMPATIBILITYRT-TCZ for Jeep JL Pink Exterior Accessories Compatible with Jeep Wrangler JL JLU Gladiator JT 2018 2019 2020 2021 2022 2023 2024 2025-Present. HIGH QUALITYRT-TCZ for Wrangler JL Pink Side Fender Vent Decal Trim Cover made of high-quality ABS plastic and used polish process for deformation protection, anti-corrosion, and years of trouble-free use. UNIQUE DESIGNNo Modification Required. Dust-proof, Durable, And Corrosion Resistance No Damage, Beautiful, Shiny, And Stylish. Allow The Whole Product Is A Perfect Fit, Never Fade, Fear Not Scratch. EASY AND QUICK INSTALLATIONDouble-sided tape Automotive Adhesive Tape Is Attached. 1. Clean The Surface Area Where You Need To Paste And Then Wipe The Water With Towel Or Tissues 2. Remove the cover on the Double-sided tape3. The Double-sided tape position should align properly on the place 4. Finally, press the decorative piece by hand, making it more solid on it. Please press 20-30 seconds or more. SATISFACTION SERVICEIf you're not 100 satisfied with our item, simply return it for a full in 30 days, no questions asked money-back service. Premium Support 1 Years After-care Service.

MaterialCar Wheel Protection Anti-collision Strips is durable soft foam and self-Adhesive, non-toxic, thick and flexible, plyable to hold up to compression.. DurableFender Flare Rubber Seal has good flexibility and compressive deformation resistance, no cracks or deformation in long-term use. And strong adhesive backing, stick firmly and non-deguming, tear off without leaving a sticky residue.. Strengthen ProtectionThe anti-collision strip of the car wheel eyebrow can widen the wheel eyebrow, prevent the dirt from splashing on the surface of the car, and effectively keep the outside of the car clean. Fender Flare Edge Trim also protects the brow wheel from everyday driving damage, such as dirt and scratches, and prevents paint peeling.. Easy InstallationThe fender protection accessories have good softness and do not require any installation tools, just tear off the tape and install them on the car wheel eyebrows. And could adjust to best fit the shape of your car tires eyebrow.. Package IncludesYou will receive a car crash strip with length 6m20Ft, width 5.5cm, you can freely cut it according to the length of the car wheel eyebrows. This is a general purpose crash strip, suitable for most cars, trucks, SUV..

Fitment Compatible with Compatible with NISSAN JUKE SSLSV 2011 2012 2013 2014 2015 2016 2017. Part Number 638611KA0A, NI1290102, 63861-1KA0A. FeatureExcellent workmanship and strict inspection before leaving the factory are necessary conditions for product reliability, stability and long-term use. All products have been tested on the machine before leaving the factory. We will check the products again before shipping for you. Attention pleasePlease read the product description carefully before purchasing to make sure it is suitable for your car.. About usCommunication Is The Best Way To Solve The Problem. If You Have Any Problems After Purchasing, Please Contact Us In Time.

Compatibility Compatible with 2014-2020 Nissan Rogue. OE Standard Meets the Original Equipment OE standards, ensuring replacement fit just like the original. Interchange Part Number 638609TA1A, NI1291101, 638619TA1A, NI1290101. Protective Function Full protection from mud scratches, sand and other outer damages for your wheels. Protects wheel wells from mud, scratches, sand and other outer damages. Robust Durable Special injection moulding process ensures that these flares have enhanced durability, flexibility and strength to resist cracking, twisting and chalking, providing a superior off-road driving experience. Stylish Design The wheel arch trim molding adds a stylish and sporty look to the fender wheel flares, improves the appearance of your vehicles. Stylish appearance makes your car more beautiful.

Compatibility Matte Smooth Pocket Fender Flares Compatible with 2009-2014 Ford F150 Styleside with 67 inch78.8 inch97.4 inch approx. 170.2200.2247.4 cm bed length models only NOT fit Platinum and Raptor models. OEM Part Number 9L3Z16038, 9L3Z16038B, 9L3Z16039B, FO1268100, FO1269100. Aggressive off-road style The rugged exterior and custom fender flares with stainless steel rivets will complement the look of your vehicle. Wide body gives the pickup truck an off-road style. Front and rear tire coverage of 2 inches approximately 5.1 cm provides additional coverage for larger tires.. Hardcore Quality Durability and flexibility of the fender flares are ensured through an injection molding process. High-quality fender flares feature precise edge cuts.. UV protection UV protection component enhances the strength of the fender flare and provides strong resistance to cracking, warping and dusting.. Easy Installation Professional installation is highly recommended, some drilling may be required. Includes two 2 front fender flares and two 2 rear fender flares, mounting hardware, etc..

COMPATIBLE MODEL - Perfectly Fit for 1999-2006 Chevy Silverado GMC Sierra 1500 2500 3500 HDIncl. 2007 Classic ModelsFit for Short Long Bed. Each fender flare is designed for the specific model, please check your vehicle's Year, Make and Model.. PERFORMANCE-FOCUSED MATERIALS - Premium-grade PP material has undergone rigorous durability trials. It will resist deformation, shrinkage and cracking even in the most extreme of climates.. UV PROTECTION - Add UV powder during the production process to ensure that the fender flares are free of chalking and cracking. Smooth black finish design, it could be painted according to the specific color of your vehicle.. EASY TO INSTALL - Accurate trimming to fit the wheels perfectly. No drilling required during installation. Installation manual and necessary mounting hardware kit are included in the package.. OFF ROAD LOOK - Protect the wheel well from mud, scratches and other external damage. The package comes with a set of Fender Flares, Mounting Hardware Kit and Instruction Manual..

UNIVERSAL FIT KIT- The kit contains 16 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that youll always have the right size.. TOP QUALITY- These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.. PREFECT FOR WHAT YOU NEED - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.. BONUS ACCESSORIES- We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.. WIDE APPLICATION- Professional push clips are widely used for car panel, door trim, bumper and fender for GM Ford Toyota Honda Chrysler etc..

Fitment Compatible with Honda CR-V 2017 2018 2019 2020 2021 2022. Part Number74115-TLA-A02 , 74115TLAA02 , HO1291108. FeatureExcellent workmanship and strict inspection before leaving the factory are necessary conditions for product reliability, stability and long-term use. All products have been tested on the machine before leaving the factory. We will check the products again before shipping for you. Attention pleasePlease read the product description carefully before purchasing to make sure it is suitable for your car.. About usCommunication Is The Best Way To Solve The Problem. If You Have Any Problems After Purchasing, Please Contact Us In Time, Before Opening Return Or Case..

MONEY BACK GUARANTEE and FREE REPLACEMENT POLICY Make No Risk for You. Please Feel Free to Contact Us if You Have Any Issues or Complaints. Compatible With 2011-2020 Dodge Durango. Aftermarket Product with Premium Quality. Directly Replace OEM Components and Easy Installation. Please Check the Description and Compatibility Chart before Your Purchasing. REPLACEMENT OEM Original Equipment Part Number 57010620AE, 57010621AE, 57010620AD, 57010621AD, CH1291112, CH1290112.

Wheel fender-flares molding trim replacement for Grand Cherokee 2014 2015 2016 2017 2018. Material made of good-quality lightweight plastic material, sturdy, helps to reduce spray and protects paint, protects wheel wells from mud, scratches, sand and other outer damages, finished with black texture can be well integrated with your car. Easy to install easy installation, perfect fit for your car, suitable for replacing your broken one, professional installation is strongly recommended. Refresh your vehicle by installing the wheel arch molding, you can give your vehicle a refresh look. It adds a touch of style and protection to your car, making it stand out from the crowd. Package included 2 x wheelhouse molding fender-flares.

Replacement for Ch-ero-kee 2014 2015 2016 2017 2018. Matte black glossy finish, premium color, can match any color car. Made of flexible plastic to safeguard your tires without worrying about scratching the body. Safeguard the wheel well from mud, scratches and other external damage. Each replacement flare is designed to fit into your factory mounting holes for easy installation.

before installation,make sure that edge of the wheel eyebrow has a sufficiently flat veneer.. Please refer to the instruction manual and installation video during installation. The product needs to be bent while sticking, and after installation, it is necessary to press firmly on every position to ensure that the double-sided tape is completely attached.. SizeProduct size 23 feet 11.5FT2pcs long, 2.165 inches 5.5 centimeters wide. Enough to fit all four wheels on most cars. It can be cut freely as required, and is applicable to most cars, SUVs and trucks.. protectTo protect your car or truck from everyday driving damage,such as mud, dirt and scratches etc,to make your car look beautiful and gorgeous.It can also cover the original scratch of the car.. Easy InstallationThe product has good softness and plasticity. It does not require any tools. Remove the red protective film and paste it directly. It can be bent and pasted according to the radian of the wheel arch, and finally cut with scissors. After installation, press firmly on each position to make it more secure.. durableThe products are made of high-quality rubber materials, with good flexibility and compression deformation capacity. It will not fade or deform under long-term ultraviolet radiation. The strong adhesive is firm and will not fall off, and will not leave sticky objects when tearing.. After sales serviceWe guarantee this product for one year. If you have any questions about the product, please contact us..

Vehicle Specific Compatibility Front fender molding trim set compatible with 19882000 Chevrolet GMC CK Series Full Size Trucks fits left driver side and right passenger side. Complete Set of 4 Pieces Includes four front fender molding trim pieces, designed to restore factory-style appearance and replace worn, faded, or missing exterior trim. OEM Interchange Reference Replaces OEM Part Numbers 15546444 15546443 and Interchange GM1291108 GM1290108 for accurate fitment and easy replacement. Chrome Finish Exterior Trim Manufactured from durable plastic with a chrome exterior finish to enhance vehicle appearance while maintaining proper fit and alignment. Buy With Confidence Comes with a 1-Year Warranty dedicated customer service team is available to assist with fitment questions or post-purchase support.

Fits 2013-2022 Buick Encore Designed specifically for the passenger side of 2013-2022 Buick Encore, this rear wheel arch molding provides a perfect fit for your vehicle.. Durable and Reliable Made from high-quality materials, this fender flare trim is built to last, offering long-lasting protection from road debris, dirt, and moisture.. OEM Compatibility Direct replacement for OEM part numbers 95291864 and GM1791121, ensuring a seamless fit and restoring your vehicle's original look.. Quick and Easy Installation Installing this molding is simple and hassle-free. No complex modifications neededjust a quick replacement to improve your vehicle's appearance and protection.. Sleek and Stylish Upgrade Not only does this trim enhance the look of your Buick Encore, but it also helps protect the wheel arches, keeping your vehicle looking clean and sharp..

COMPATIBILITY Compatible With 2009-2014 Ford F150 Styleside with 67.0 78.8 97.4 bed length models only NOT not fit Platinum and Raptor models.Interchange part number 9L3Z16038B, 9L3Z16038A, 9L3Z16039B.. ADVANCED OFF-ROAD STYLE Factory appearance and custom-designed fender flares will compliment your vehicle's look. Wide body makes Pickup full of off-road style.The tire coverage is over 2 in front and rear,providing additional coverage for larger tires.. EFFECTIVE PROTECTIVE Customised according to the contours of the car body, accurately covering the mud-splash-prone areas, protecting the paintwork and bodywork of the car from mud and dirt.. HIGH DESIGN Suitable for a wide range of models, fits tightly with the body, no shaking and rattling when driving. Injection moulding process ensures the durability and flexibility of the wing shine. High-quality wing flaring for precise edge-cutting effect.Effectively block the erosion of the chassis components of the vehicle splash, reduce the risk of failure due to the accumulation of sediment, extend the life of the car.. INSTALLATION No cutting or trimming needed some drilling may be required. Mud flaps removal are required prior to installation. Mounting Instruction and Hardware included on package. Professional installation is highly recommended..

Applicable ModelsJolong Wheel Arch Fender Flares Covers are compatible with For Jeep Grand Cherokee 2011-2016. Materials and FeaturesMade of durable ABS plastic. All wheel arch fender flaer from JOLONG are made of high quality plastic which is durable and anti-aging and can cope with the harsh environment. Package Includes1 Wheel Fender Flare front left side. Easy to installBolt-on installation, perfect fit, no modification required, no user guide or instructions included, professional installation recommended, fits your car perfectly. OE StyleInterchange part numbers 1MP39RXFAE, CH1290106C.

Fender Trim Compatible with 2017-2022 Honda CR-V. Interchange Part Numbers 74165TLAA02, HO1290108. ColorFinish Textured Black. Material Plastic. Fitment Direct Fit Replacement. 1-Year Warranty When Purchased through Auto Parts Giant. Enhance your vehicle's look and protection with high-quality fender trim, essential auto parts that complement fender flares seamlessly..

Premium Rubber Construction-Thick, flexible rubber resists compression deformation, extreme temperatures, and aging. Non-toxic material maintains sealing performance for years without cracking or hardening. Dual-Edge Debris Vibration Protection-T-shaped design creates a tight seal along fender edges to block water, dust, and road debris. Reduces friction and vibration transfer while preventing paint damage from rock chips. Easy Peel-and-Stick Installation-Pre-applied automotive-grade adhesive bonds securely to cleandry surfaces. Includes 33ft continuous length cut to fit any vehicle. Note Requires 24-hour curing before washingdriving. Universal Fit for Most Vehicles-Compatible with cars, trucks, SUVs, vans, RVs, and off-road vehicles. Not suitable for right-angled, thick, or heavily curved edges verify fender profile first. If you have any questions, please feel free to contact us at any time.

Note Your order may be split and fulfilled from multiple locations - arriving on different days.. Fender Trim Compatible with 2007-2011 Honda CR-V. Interchange Part Numbers 74115SXSA00, HO1291104, 74165SXSA00, HO1290104. ColorFinish Primed. Material Plastic. Fitment Direct Fit Replacement. Enhance your vehicle's look and protection with high-quality fender trim, essential auto parts that complement fender flares seamlessly..

MATERIAL The edge trim guard is made of EPDM rubber, which is waterproof, anti-corrosive, anti-abrasion, flexible to be bent along the edge contour easily and has a nice textured look Total Length 32.8ft10m. STRONG GRIP Adhesive free and can be installed repeatly Fits 364 to 14 thick edges, metal clips embedded in the rubber which designed with four claws grip door edges tightly, open or close still smooth. EASY TO INSTALL Press the trim all along the edges and tap with hand or mallet gently, at the end easily cut it from the seam btween clips Tips pull out the first and last exposed clips. MULTI-FUNCTION Protects edges from bump Protects people from sharp edges and the edge trim guard is weather resistant to isolate heat, cold, wind, rain, dust, noise Or redecorates the old chipped edges. WIDE APPLICATION Covers door, window, sharp edges of car, RV,truck, motobike, boat, hatches, trailer, forklift, other heavy machine and playground equipment Home application such as rabbit cage, auto glass door, furnitures like stool, locker, shelf or helmet, metal sheet.

PERMANENT PRO RESULTS Permanently attaches side moldings, trim and emblems to the interior and exterior of vehicles. WEATHERABLE High strength double-sided adhesive withstands weather and impact. Temperature use range is -40F to 250F. EASY TO USE Cut, apply, press. That's it. No tools required. Avoid mess of liquid adhesives. SUPER CONFORMABLE 3M VHB tape conforms to irregular and textured surfaces. BOND WITHOUT RIVETSSCREWS Aircraft-grade adhesive strength allows for strong metal to metal bonding without rivets.

VEHICLE-SPECIFIC FITMENT - Compatible with 2007-2013 Chevy Silverado 1500 and 2007-2013 Silverado 2500HD3500HD Fleetside New Body Style models with 78.097.6 6.5FT 8FT beds only. NOT Fit GMC Sierra, Stepside, Dually models, or Factory Mud Flaps. Designed to align with factory mounting points for a secure OEM-style fit.. FULL TIRE BODY PROTECTION - Wide flare coverage helps block mud, sand, rocks, and road debris from damaging your truck body and wheel wells. Extra tire coverage also helps keep your pickup cleaner while supporting larger wheel tire setups.. HEAVY-DUTY CONSTRUCTION - Made from impact-resistant polypropylene using advanced injection molding technology for enhanced durability, flexibility, and strength. Built to resist cracking, warping, chalking, and harsh outdoor conditions for long-lasting performance.. UV-RESISTANT TEXTURED FINISH - Fine-textured matte black surface delivers a rugged factory-style appearance while resisting fading from long-term sun exposure. Textured finish is NOT paintable and designed to maintain its clean look over time.. EASY INSTALLATION - Includes mounting hardware and installation instructions for DIY-friendly setup. Most installations finish within about 1-2 hours with no cutting or trimming required on most models. Minor drilling may be needed on some trucks. Factory mud flaps must be removed before installation.. NOTENot Paintable.

Fitment These fender flares are compatible with Ford Maverick. The fender flares are adapted to use with Mabetts mud flaps, and not fit OEM mud flaps. Updated Verison Updated with an injection molding process, the edges are now smooth, no need for after-trimming. Installing these fender flares is effortless, as no drilling is required. They securely attach to the vehicle using original scews. Superior Protection These fender flares effectively shield the body from mud and sand kicked up by the tires, providing full protection. Dynamic Style By eliminating unsightly gaps, these fender flares seamlessly integrate with the car's body style, creating a visually appealing and cohesive look. Scanned Design These fender flares are designed using scanned original car data, ensuring seamless integration with your Ford Maverick truck's body without interfering with the mud flaps installation.

ENHANCE PROTECT YOUR RIDE EZ Lip Fender Flares are a fast, easy, and low-cost way to give your car an aggressive, off-road look while keeping your paint protected from road debris.. FAST EASY INSTALLATION Just 3 easy steps and you can extend your fenders by up to 1 inch. No drilling or screws are required. Just peel, stick and cut. SUPER STRONG 3M ADHESIVE Installs with high quality 3M adhesive that can withstand the harshest environments. With proper installation, our products easily withstand car washes and high speeds.. ONE SIZE FITS ALL Flexible design molds and bends to the shape of your stock of aftermarket fenders. Universal compatibility works on any make or model.. MADE IN AMERICA Designed and manufactured in the USA with top quality materials and craftsmanship. You can relax knowing we offer the best quality universal-fit products..

MADE Of DURABLE NYLON- Our plastic fastener auto clips perfect fit your parts very tightlywhich is strong, robust and vibration resistant, would not break or crack easily.. 18 MOST COMMON SIZES- Our auto Puch Type Retainer 190PCS Kit are available in 18 different sizes.Perfect replacement for broken retainers.Can meet the various needs of your car. SAVE YOUR TIME- No need to go to a auto parts store and look for different fasteners.And comes with a plastic box with 18 compartments for organized storage.You can find it easily.. TOUGH FASTENER REMOVER- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them.. WIDE APPLICATION- Professional push clips are widely used for car panel, door trim, bumper and fender for Toyota Honda Nissan Mazda etc. Please feel free to contact us if there's any issue, we'll provide 100 satisfactory service..

Universal fit kit - Great assortment push retainer kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more..Note If the size of the earbud tips does not match the size of your ear canals or the headset is not worn properly in your ears, you may not obtain the correct sound qualities or call performance. Change the earbud tips to ones that fit more snugly in your ear. Save time and money - You can find 240PCS automotive push type retainer kit in the box and no need to go to auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.. High quality - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.. Most common sizes - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.. Easy storage - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car..

Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.Fit Type Universal. The extruded U-nuts can be used to replacefix to the bumper. The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement. Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z see details. Package includes 10pcs Extruded U-nuts - ReplaceFix to the BumperCORROSION RESISTANT 15pcs Body Bolts with Built-in Fender Washer CORROSION RESISTANT 10pcs Plastic Push Clips as pictured.

UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 6 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.. SAVE TIME AND MONEY - You can find 200PCS automotive push type retainer kit and no need to go to a auto parts store to look for different fasteners.. HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.. MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.. Package IncludeIncludes 30 pcs 6mm Clips ,30 pcs 7mm Clips, 30 pcs 8mm ClipsYT1362, 50 pcs 8mm Push ClipsYT3143, 30 pcs 9mm Clips, 30 pcs 10mm Clips..

Compatibility - Compatible with 2014-2018 Chevy Silverado 15002015-2019 Silverado 2500HD 3500HDOnly fit models with fleetside bed.Not for dually models.. Heavy Duty - Special Injection Molding process ensures enhanced durability, flexibility and strength. To protect your wheel from scratches, mud or other outer damage.. Hardcore - Crucial tire coverage keeps dirt and debris off your pickup, maximum tire coverage for whatever the road throws at you and keeps you legal when running larger wheel tire packages.. Sturdy and Durable - Effectively protects vehicle from mud, scratches, sand and other external damage.. Easy Installation - No cutting or trimming needed some drilling may be required. Professional installation is highly recommended..

Enhances the look of your vehicle for a true custom look. Made of 304 stainless steel and covered by Putco's NeveRust lifetime warranty. Includes UV-resistant rubber edge trim for a customized fit. Installs easily using Stainless Steel Hardware.

EPDM Rubber Material EPDM dense rubber, durable and not easy to age, extremely hard wearing and washable. Compare to other's PVC material edge trim, EPDM material edge trim is not easily broken down by ultraviolet light and ozone, has better thermal stability, radiation resistance and weather resistance.. High Quality Adhesive The glue we use is high-quality glue with high strength, not easy to fall off, and not easy to oxidize outdoors.. Easy to Cut and Bend This rubber edge trim can be easily cut with scissors and is flexible enough to bend into tight corners and complex angles, Perfect for curved edges as well as straight edges.. Easy to Install and Remove Self adhesive edge trim, can be installed directly without glue The glue on the edge trim is easy to remove and does not corrode the product, no marks will remain on the product after removing the edge trim.. Widely Application The trim's slot wide 1161mm, can used to cover the edge thick from 0 to 5642mm Such as car doors, cabinets, steel boxes, steel tiles, cages..

Self-Adhesive Edge Trim This U channel edge trim can be installed directly without glue as it's self-adhesive trim The glue on the edge trim is easy to remove and does not corrode the product, no marks will remain on the product after removing the edge trim. Easy To Be Cut This rubber edge trim can be easily cut with scissors and is flexible enough to bend into tight corners and complex angles.. Application The edge trims can used to cover the edges of all the sheet parts to prevent people been hurt by the shape edges, it can fit edge from 132 to 332.. Material EPDM Dense Rubber, durable and not easy to age, extremely hard wearing and washable. Can last much longer time than PVC material trims.. Heat Resistance Rubber Temperature ratings -40 F to 212 F..

MANUFACTURER PART NUMBER 57010620AE, 57010620AD. ColorTextured BlackMaterialPlasticPlacement on Vehicle Right, Front. Installation MethodOEM standard, easy to install, direct replacement - Guaranteed to fit and function for your specific application,to protect wheels from dirt, sand and stones. Fit for 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011, Dodge, Durango Front, Passenger Right Side. Please make sure the Fender Flares you need is match this part number before purchasing.

Replaces CH129011257010621AD. Location Front Left Driver Side matte finish. Compatible with 2011-2013 Dodge Durango Crew2012-2013 Dodge Durango Crew Plus. Compatible with 2014-2016 Dodge Durango Limited2014-2015 Dodge Durango Rallye. Compatible with 2017-2018 Dodge Durango GT2012-2018 Dodge Durango Special Service. Compatible with 2011 Dodge Durango Express Heat2018 Dodge Durango Pursuit SRT. Compatible with 2011-2018 Dodge Durango Citadel RT SXT. Made of high-quality materials with maximum durability.And exact equivalent part meets the original manufacturer's specifications and features.. Easy to install and direct replacement for the old or broken one. Save your time and money.. If you are not satisfied with the product, please feel free contact us via Amazon Message, and we will reply within 24 hours and help solve the problem..

Aftermarket Replacement Fender Trim Compatible with 2017-2022 Honda CR-V. Features Direct Fit, Textured Black, Plastic. Interchange Part Numbers 74115TLAA02, HO1291108. Replaces OE Number 74115TLAA02 Replaces Partslink Number HO1291108. 1-Year Warranty When Purchased through Auto Parts Giant.

Complete set of Putco stainless steel fender trims to customize your vehicle's look. Made of durable NeveRust stainless steel and UV-resistant rubber edges for a customized fit. Fender trims install easily using stainless steel hardware. Full and half stops at molding sizes.

QMI 482003 -Fender Trim Compaible With Lincoln Town Car , Fits Years 2003-2011. Material Mirror Polished Premium Grade Stainless Steel With Rubber Seal Guard Attached.. Installation Pre Drilled Holes, Self Tapping Screws Included, Easy To Read Instructions Included. 90 Day Warranty, Easy Installation, Guarnteed To Fit, Built To Last. Customer Support.

QMI 275504 -Fender Trim Compatible With Ford Escape, Fits Years 2008-2012, Also Fits Mercury Mariner 2005-2007. Material Mirror Polished Premium Grade Stainless Steel With Rubber Seal Guard Attached.. Installation Pre Drilled Holes, Self Tapping Screws Included, Easy To Read Instructions Included. 90 Day Warranty, Easy Installation, Guarnteed To Fit, Built To Last. Customer Support.

FLEXIBLE PVC EDGE TRIM Trim-Lok Edge Trim is designed to safely and easily cover rough surfaces. With internal aluminum metal clips and gripping tongue, it provides excellent grip and grip retention to help you get the job done the right way.. MANY APPLICATIONS This flexible edge trim can be used on marine, automobile, machinery, and equipment cases including uses on boats, cars, vans, forklifts, golf carts, helmets, playground equipment, tables, and more. WEATHER-RESISTANT Made of a durable PVC material, this flexible plastic edge trim is ideal for outdoor use. It can resist temperatures ranging from -20 to 158 while withstanding moisture and sunlight. Dependability is a guarantee with Trim-Lok.. EASY INSTALLATION Push-on edge trim is quick and simple to install. It is designed to easily cover sharp, rough edges providing DIY edge protection on metal, sheet metal, plywood, and other materials. Great for use as boat edge trim..