ENGINEERED FOR PERFECT FIT AND ZERO SIGNAL INTERFERENCE Our Magnetic FasTrak Flex Holder is precision-designed to securely cradle FasTrak and FasTrak Flex transponders, ensuring a flawless fit. Its open-frame, low-profile construction guarantees absolutely no signal blockage, providing reliable toll readings every timeeven when switching HOV modes on California roads.. SUPERIOR MAGNETIC HOLD WITH NO STICKY RESIDUE This FasTrak Flex Holder for Windshield utilizes a powerful, built-in magnet for a rock-solid grip. Your transponder snaps securely into place and stays put through bumps, heat, and daily commutes. Unlike adhesive mounts, it leaves zero residue, offering a clean and removable solution for your windshield.. WEATHER-TOUGH CONSTRUCTION FOR YEAR-ROUND RELIABILITY Built to endure, this holder is constructed from high-grade, UV-resistant materials that withstand harsh sunlight and temperature extremes. It resists fading, warping, and suction failure, delivering dependable performance through every season in any climate.. EFFORTLESS FLEXIBILITY FOR MULTI-VEHICLE USE The defining benefit of our magnetic design is instant transferability. Switch your transponder between personal cars, rentals, or carpool vehicles in seconds. Enjoy the perfect balance of a secure mount and ultimate convenience, ideal for families and travelers who value flexibility.. SIMPLE 30-SECOND, TRULY TOOL-FREE INSTALLATION Experience ultimate ease. To install, simply clean your windshield and press the reinforced suction cup base firmly into placeno tools or messy adhesives required. Your FasTrak Flex Holder is ready to use immediately, offering a permanent-feeling hold with hassle-free setup..

QUICK-CLAMP MOUNTING SYSTEM For easy, tool-free setup and adjustments of TRACK-LOCK tool organizer mounting attachments. SECURE, NON-SLIP RUBBER CONTACT POINTS Securely connect TRACK-LOCK attachments to the rail base to hold them in place for tool storage. STACK PACK COMPATIBILITY Integrates into STACK PACK tool box organizer storage system via FS1607 Front Mount Rail and FS1608-2 Side Mount Rails, sold separately. UP TO 25 LB. LOAD CAPACITY For versatile mounting and tool storage. IDEAL FOR STORING Outdoor power equipment and long-handled 0.8- to 1.4-inch diameter tools like rakes, shovels, brooms, and more.

Designed for FasTrak Flex Perfect Fit Clear Signal Custom-built for FasTrak and FasTrak Flex transponders used on California toll roads. Ensures perfect signal readability with zero interferenceno missed tolls or false detections, even when switching HOV modes.. 3M Adhesive Suction Combo Strong, Stable, Reliable Double-secured with industrial-grade 3M adhesive and reinforced suction mount. Your FasTrak stays fixed even on hot days, bumpy roads, or long drivesno falling, no mess, no residue.. All-Weather Durability Heat UV Resistant Constructed from UV-resistant acrylic and temperature-proof suction cups, this holder withstands Californias extreme sunlight and summer heat. No fading, warping, or losing suction over time.. Easy to Transfer Between Vehicles Clean Removal Switch your FasTrak between vehicles in seconds without leaving sticky residue. Ideal for multi-car families, rental users, or carpoolers who value convenience and flexibility.. 5-Step Simple Setup Tool-Free Installation ? Clean windshield, apply adhesive strip, peel film, attach FasTrak Flex, press firmly, done. Quick, clean, and secureready for every drive across California toll roads..

Fits All Major Toll Passes - Old and New EZ Pass, FasTrak, I-Pass, I-Zoom, Fast Lane with HOV switch, Quick Pass, Elite Pass, PrePass Including New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, Ohio, South Carolina, Indiana and Virginia. UV Resistant - Designed to withstand intense UV rays without warping, ensuring your toll pass stays secure and protected.. Durable Suction Cups - Equipped with strong suction cups that firmly attach to your windshield, performing reliably in high heat and cold conditions.. Versatile Adhesive Tape Includes 4 strips of premium quality adhesive tapes that work with all standard toll tags across the US, providing a firm and reliable hold.. Trust the Original - We are the Original Toll Pass Holder. Choose us with confidence, knowing we pride ourselves on providing only the highest quality products..

Engineered for a Flawless Fit Uninterrupted Signal This Magnetic FasTrak Flex Holder for Windshield is precision-crafted to cradle your FasTrak and FasTrak Flex transponders perfectly. Its low-profile design ensures zero interference with the transponder's signal, guaranteeing reliable readings on all California toll roads. Avoid missed tolls or false detections, even when seamlessly switching between HOV modes.. Ultra-Secure Magnetic Mount Strong Hold, Zero Residue Experience the ultimate in clean, reliable mounting. Our FasTrak Flex Holder utilizes a powerful, industrial-strength magnet paired with a high-grip windshield base. Your transponder locks firmly in place, remaining secure through daily commutes, bumpy roads, and hot California summersno sliding, no falling, and absolutely no sticky adhesive residue to clean up later.. Built for Californias Climate Heat UV Resistant Designed to endure, this holder is constructed from premium, UV-stable materials that resist fading and warping. The magnetic assembly and windshield base are engineered to withstand extreme temperature fluctuations, ensuring a dependable hold season after season without losing strength or performance under the relentless sun.. The Epitome of Convenience Instant Transfer Clean Removal The defining feature of a magnetic mount is effortless versatility. Switch your FasTrak Flex between vehicles in literal seconds. This FasTrak Flex Holder is the ideal solution for multi-car households, rental car users, and carpoolers. Simply lift it off and re-attachenjoy maximum flexibility with zero hassle and no damage to your windshield.. Suction Base Stays, Magnets Snap Effortless Secure This Magnetic FasTrak Flex Holder mounts with a sturdy suction cup that locks to your windshield. Your transponder then snaps on and off magnetically for instant use or transfer. Its the secure, permanent base and quick-release convenience you needno tools, no adhesives..

ALL NEW 2023 TOLL PASS HOLDER - Our new 2023 holders are now stronger than before The flexible base lets you easily remove the holder from the windshield without breaking it. Plus, they are 100 UV Protective U.S Patented. FITS ALL MAJOR TOLL PASSES - Old and New EZ Pass, FasTrak, IPass, IZoom, Sun pass, Fast Lane with HOV switch, Quick Pass, Elite Pass, PrePass Including New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, Ohio, South Carolina, Indiana, and Virginia. ATTACH IN JUST SECONDS - Easy removal and reinstallation of your toll tag, making it convenient for use in multiple vehicles. GREAT VALUE - 4pcs Reclosable EZ Pass Adhesive strip set are INCLUDED 6.00 Value. 100 SATISFACTION GUARANTEE - Our toll pass holders are backed by a 100 guarantee that you are fully satisfied with your product..

Durable Material This windshield sticker holder is made of high quality material, sturdy and durable, waterproof and sunproof, can effectively protect the pass card from bad weather damage and accidental scratches, specially designed to withstand temperature changes, not easy to oxidize, long service life.. Strong Adhesion The suction cup mount delivers exceptional holding power, providing a secure grip that firmly attaches to the windshield. It withstands impacts, vibrations, and bumpy roadswhether on winding mountain roads or smooth highwaysensuring uninterrupted driving.. Universal Compatibility This iPass sticker mount works with major electronic toll cards, making it ideal for rental cars, ride-sharing, private vehicles, public transit, or multi-car households. Whether driving locally or across cities, it ensures swift passage through toll booths.. Residue-Free Removal Designed with user-friendliness in mind, this e-tag holder can be effortlessly detached when not in use or when switching vehicles. It leaves no residue or damage on the windshield, preserving clear visibility and interior cleanliness.. Convenient Installation You will get 2 x transparent brackets and 4 x strong suction cups, sufficient quantity, compact and easy to carry and store. It is very easy to install, just slide the pass card into the bracket and use the included suction cups to fix it on the windshield..

All-in-one EZ pass Mounting Kit Includes four strong screw suction cups, four plated metal plates, four 3M hook-and-loop buckles, and a transparent storage box. EZpass holder for windshield meets all installation and storage needs in one setno extra accessories required. Flexible Metal Suction Mount The metal suction mount has good structural strength. Fastrak flex holder supports flexible positionangle adjustment for optimal signalusage habits and stays tight on the windshield, reducing shaking while driving, transponder holder for car. Tool-Free Installation and Residue-Free Removal EZ pass flex holder can install in 30 seconds, no tools are required. Easy pass holder for windshield can easily remove via the small ears on the suction cup edge, leaving no scratches or glue residue. High Compatibility Universal Toll Pass Holder EZ pass transponder for all states fits Most US Major Toll Passes EZ Pass, E-ZPass Flex, SunPass, I-PASS, FastTrak, etc.. No need for separate holders for different passesone holder fits multiple cards, easy pass holder for windshield. Ultra-stable Transponder Holder 50 more stable than standard universal holders. This EZ pass holder for cars keeps transponders secure on bumpy roads or during car washes. EZpass suction cup mount allows switching transponders between multiple cars without residue.

Hands-free Convenience Keep your phone within reach and in sight, whether you're on a plane, at your desk, or working out at the gym.. Versatile Mounting The strong clamp can attach to tables, luggage handles, gym equipment, and more, up to 1.5 inches wide.. Flexible Viewing Dual joints with 360-degree rotation allow for the best viewing angle, whether you prefer vertical or horizontal orientation.. Fits Most Phones Compatible with a wide range of phone sizes, from the iPhone Mini to the Samsung Note 20 Plus.. Satisfaction guaranteed We stand behind our quality products and offer a 30-day free return policy. Try it out for yourself..

Secure Mounting System for Toll Transponders Designed to securely hold toll transponders, dash cam accessories, or lightweight devices on your windshield using reusable fastener strips for a firm and stable attachment.. Includes Fastener Strips Protective Static Film Comes with 8 reusable fastening strips and 2 static cling films that act as a protective layer between your device and the glass surface.. Glue-Free Static Cling for Surface Protection The PET film attaches to glass using static cling, helping protect tinted windshields and reducing direct contact from mounting adhesives.. Flexible Mounting Options for Different Setups Use the static film as an optional protective layer, or attach fastener strips directly to smooth surfaces depending on your installation preference.. Reusable Easy to Remove Without Residue Designed for easy removal and reinstallation, allowing you to switch vehicles or reposition devices without leaving marks on your windshield.. Multi-Use Mounting for Car Home Applications Works not only for toll passes but also for dash cams, GPS units, sensors, or lightweight accessories on glass, tile, or smooth surfaces..

Wide Compatibility Fits a wide range of toll passes used across the majority of US states. Fits EZ PassFlex, I-PASS, FasTrakFlex, SunPass, Good To Go, IZoom, Quick Pass, Elite Pass, PrePass and more. It's the perfect match for your travel needs.. Strong Suction Power It securely attaches to your windshield, defying bumps, vibrations, and rough road conditions. Your toll pass stays firmly in place, ensuring hassle-free toll passage. You could conquer any toll booth with confidence.. Simple Removal When you no longer need to use the holder, it can be easily detached without leaving any residue or marks on the windshield. Enjoy the convenience of hassle-free removal while flaunting a clean windshield worthy of envy.. Quick and Easy Installation Our EZ Pass Transponder Holder has 2 suction cups and 4 mounting strips, allowing for a speedy and hassle-free attachment to your windshield without any tools or complicated steps..

Clear fastener backed with a clear acrylic pressure sensitive adhesive.. IndoorOutdor use High temperature performance up to 200 degrees.. Made in U.S.A - Industrial Strength 3M Brand. Includes Four 3M Dual Lock Strips 1.5in x 0.5in. Easy peel and stick application..

Perfect Fit for Older Larger EZ PassEZ Pass Flex - EZ Pass Holder is designed specifically for the lder Larger EZ PassEZ Pass Flex, the most common model approximately 4.1 x 3.1 inches. NOTE Not compatible with EZ Pass MiniiPass, the new rectangular EZ Pass, Uni Pass, or Sunpass.. Effortless Installation - Strong and tight adjustable hook and loop band can be conveniently installed to your car rearview mirror, clasp can adjust the band to tighten, keep tight and safe even violent vibration. Say goodbye to falling toll passes and enjoy smooth, reliable access to toll roads.. UV Resistant - Designed to withstand intense sunlight and extreme weather conditions, ensuring your toll pass remains secure and protected.. Easy Vehicle Transfer - Our holder allows toll tags to be installed in different vehicles without hassle. Simply attach and go. Its versatile design is perfect for rental cars, frequent vehicle changes, or long road trips, while its strong hook and loop strap ensure secure attachment.. A Thoughtful Gift - A practical and meaningful gift for anyone who values convenience and functionality on the road..

eZpassClip is your mounting solution for the new-style transponder.. eZpassClip makes it easy to use your electronic toll tag in multiple vehicles or simply remove it to prevent theft.. eZpassClip mounts with two suction cups to your windshield. Simply slide up your electronic toll tag and you're done. eZpassClip is proudly made in the USA of high density, UV resilient plastic.. Your eZpassClip is ready to use. Remove any Velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Slide your toll tag up from the bottom and you're ready to go. Available in either black or white..

eZpassClip is your mounting solution for the wedge-shaped transponder see images.. eZpassClip makes it easy to use your electronic toll tag in multiple vehicles or simply remove it to prevent theft.. eZpassClip mounts with two suction cups to your windshield. Simply slide up your electronic toll tag and you're done. eZpassClip is proudly made in the USA of high density, UV resilient plastic.. Your eZpassClip is ready to use. Remove any Velcro attached to your toll tag, dampen the suction cups if needed, and attach to a convenient location on your windshield. Slide your toll tag up from the bottom and you're ready to go. Available in either black or white..

Safe and convenientThis Ezpass stand is equipped with a super strong suction cup, which can be reliably and firmly fixed to your windshield, securely holding your toll pass in place while you drive. No need to worry about your EZ Pass falling or getting lost during daily commuting.. Easy to installThe EZPass bracket makes installation effortless. Simply use the included suction cup to slide in and attach it to the windshield to easily enter the toll road without any adhesive.. Durable MaterialsThe EZ pass holder is made of high-quality ABS plastic and sturdy TPU, which is durable and long-lasting. Fee based pass holders can withstand daily use and adverse weather conditions.. Waterproof and UV resistantThis toll pass holder has undergone special treatment to This toll pass holder has undergone special treatment to offers protection against water damage and UV exposure, extending the service life of the toll pass.. Fit for EZ Pass MiniiPassThis EZ Pass windshield bracket is specifically designed for the EZ Pass MiniiPass approximately 3.7 x 1.9 inches. Please note It is not compatible with older or larger EZ Pass models, EZ Pass Flex with HOV switch, new rectangular EZ Pass, UniPass, or Sunpass..

HEAVY DUTY Adhesive Mounting Strips - Reclosable Fastener that withstands high heat and cold Attaches in Seconds No Prep Needed. WORKS WITH ALL MAJOR TOLL PASSES - Old and New EZ Pass, FasTrak, IPass, IZoom, Sun pass, Fast Lane with HOV switch, Quick Pass, Elite Pass, PrePass Including New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, Ohio, South Carolina, Indiana and Virginia. PREMIUM QUALITY - PREMIUM 2ply Alcohol Prep Pad Included to clean the area before applying. WHAT'S INCLUDED 8 Pcs 4 sets that is enough up to 2-4 vehicles or 2-3 Photo Frames for Home Use. 100 SATISFACTION GUARANTEE - These adhesive mounting strips are backed by 100 guarantee that you are fully satisfied with your product..

ALL NEW 2021 TOLL PASS HOLDER - Our new 2021 holders are now stronger than before The flexible base allows you to easily remove the holder from the windshield without breaking it. Plus, they are 100 UV Protective U.S Patented. FITS ALL MAJOR TOLL PASSES - Old and New EZ Pass, FasTrak, IPass, IZoom, Sun pass, Fast Lane with HOV switch, Quick Pass, Elite Pass, PrePass Including New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, Ohio, South Carolina, Indiana and Virginia. ATTACH IN JUST SECONDS - with suction cups which even come with RELEASE TABS so it is super easy to remove from the windshield.. GREAT VALUE - 4pcs Reclosable EZ Pass Adhesive strip set are INCLUDED 6.00 Value.

QUALITY Made out of premium ABS plastic materials it is a long-life product to serve you for all your EZ Pass holder needs for years to come. The suction cups that come with it are made of high-grade rubber and will stick to your windshield without any issues.. DESIGN Our EZ Pass Holders were designed so that you can transfer your EZ pass from vehicle to vehicle without leaving any Velcro residue everywhere. Especially ideal to use for rental cars and is easily removable to prevent theft. It also comes along with three suction cups that mount nicely to your windshield and will stay there unless it's physically removed.. FIT the EZ Pass holder dimensions are 3.75in wide x 2in tall x 1.25in deep. The top gets snugger and reaches a total of 0.5in deep as it was designed to fit the NEW SIZE EZPasses that are available in the following states New York, Delaware, New Hampshire, Maryland, Ohio, Virginia, Rhode Island, New Jersey, Pennsylvania, Maine, Massachusetts, Illinois, West Virginia and any other state with a similar size EZPass transponder.. PACKAGE CONTENTS 1 Clear EZ Pass Holder and 3 suction cups. Manufactured for NuBliss Automotive.. 100 MONEY-BACK GUARANTEE Our EZ Pass holders are backed by a 100 Customer Satisfaction Guarantee Policy. This policy was put in place to ensure that your full satisfaction with our product or receive your money back NO QUESTIONS ASKED, so go ahead and try our EZ Pass holders now, RISK FREE.

These are the same mounting strips that came with your toll pass. Included in this kit is 8 Pcs 4 Sets lock adhesive strips 0.5 inch x 1.5 inch. Works with for E-Z Pass, I-Pass, Fastrak, Fastlane, IZoom, 407ETR, and many other transponder based toll collection systems.. High performance clear acrylic adhesive. Won't shake, rattle, buzz, block signals, or fall off like suction cup holders, IndoorOutdoor use.

Major US Toll Pass Compatibility Seamlessly works with old and new EZ Pass, ExpressToll, EPass, FasTrak, I-Pass, I-Zoom, Fast Lane with HOV switch, Quick Pass, SunPass covering states like New York, New Jersey, Massachusetts, Illinois, and more. Perfect for standard toll pass transponders that use hook and loop mounting.. Ultra-Strong Suction Technology Super strong suction cups that stay secure even on bumpy roads and high speeds, hold up in extreme Florida heat without falling off.. Easy Installation Removal No tools required - simple suction cup and hook and loop system, removes cleanly without leaving marks or residue on windshield, perfect for rental cars and switching between vehicles.. Smart Design Mounts at bottom of transponder without blocking signal recognition, compact design doesn't obstruct view or affect car appearance, fits perfectly behind rearview mirror.. Quick Installation Our product includes Two sets of holders Backup Hook and Loop Buckle X4 Strong Suction Cup X4 Plated Metal Plate X4. No complicated tools are required, just a few simple steps to install the EZ Pass to your windshield..

Fits all new major toll pass holders - including New York, New Jersey, Massachusetts, Maine, Vermont, Pennsylvania, Delaware, Illinois, Maryland, South Carolina, Indiana and Virginia. Attach in just seconds - with suction cups which even come with release tabs so it is Super easy to remove. ATTACH IN JUST SECONDS - with suction cups which even come with RELEASE TABS so it is super easy to remove. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

UNIVERSAL COMPATIBILITY Designed to be the ultimate solution for your toll needs, this case works perfectly as an ipass holder and fits all major transponder models. Whether you have the standard electronic tag or the new switchable ez pass flex holder, our design ensures a rattle-free fit without blocking the HOV switch mechanism. INDUSTRIAL STRENGTH SUCTION Engineered to withstand extreme summer heat and winter cold, this ezpass mount utilizes premium suction cups that stay firmly attached to your glass. Unlike permanent adhesives, our ezpass suction cup mount allows you to easily move the device between vehicles without leaving any sticky residue behind. EASY INSTALLATION REMOVAL Setup takes just seconds. Simply press the suction cups onto a clean windshield area. This easy pass holder a common favorite for frequent travelers makes swapping your toll transponder from your personal car to a rental vehicle effortless and tool-free. DISCREET DURABLE DESIGN Constructed from high-quality, UV-resistant materials, this toll tag holder prevents your transponder from fading or warping in the sun. Its compact profile hides neatly behind your rearview mirror, functioning as an invisible ez pass mount that wont obstruct your driving view. RELIABLE SIGNAL RECEPTION Don't risk toll violations. This case acts as a secure transponder holder for car windshields, ensuring your tag is held at the optimal angle for toll readers. It provides the perfect balance of protection and signal transparency for a hassle-free driving experience.

QUALITY made out of premium abs plastic materials it a long life product to serve you for all your ez pass holder needs for years to come the suction cups are made of high grade rubber and will stick to your windshield without any issues. DESIGN our ez pass holders were designed so that you can transfer your ez pass from vehicle to vehicle without leaving any velcro residue everywhere especially ideal to use for rental cars and easily removable to prevent theft it also comes along with three suction cups that mount nicely to your windshield and will stay there unless it's physically removed. COMPATIBILITY this ez pass holder was made to fit the new size ez pass holders for the states of new york delaware new hampshire maryland ohio virginia rhode island new jersey pennsylvania maine massachusetts illinois west virginia any other state with a similar size ez pass transponder. PACKAGE CONTENTS 1 EZ Pass Holder and 3 suction cups. Manufactured for NuBliss automotive accessories.

Designed specifically for your Toll Tag, EZ Pass and SunPass using strong interlocking mushroom-shaped heads that communicate with a clear snap. Fastener with Alcohol Prep Pad Included in this kit is 8 dual lock adhesive strips 0.5 x 1.25. Great For Your Toll Tag ez pass mounting strips Pre-Cut strips designed specifically for use with your Toll Pass, EZ Pass, SunPass or FastPass and cover for ez pass holder. Long-lasting bond with a high performance clear acrylic adhesive grip tape. Easy Installation ezpass mounting strips that are easy peel and stick application that has a high quality of material and durability. EZ pass strips with adhesive water-resistant and work well on metals, glass, and plastics. Water resistant and temperature resistant up to 200 degrees, ideal for both indoor and outdoor application on metals, glass, and plastics, outperforms common 3m double-sided tape. Strong interlocking mushroom-shaped heads that connect with an audible snap. High performance clear acrylic adhesive. Kit includes 8 dual lock adhesive strips 0.5 x 1.25 and an alcohol prep pad for thorough cleaning before application, won't shake, rattle, or fall off like suction cup holders.

Created by a flight attendant who saw a need for a phone stand that would allow you to watch movies and TV shows on long flights with your personal device. The Flex Flap can be used by anyone with it's simple and flexible design. This phone holder makes for a great gift for birthdays and holidays. PREMIUM MATERIALS - Made of black leather materials for great phone grip and aluminum alloy core for adjust-ability. This extremely light weight travel accessory is smooth to the touch and durable to ensure your portable device will not be scratched or harmed.. FREE YOUR HANDS - This ultimate phone holder will make your travel or viewing experience more comfortable by placing your Android Tablet or iPhone at any angle you desire. A great cell phone holder for car to use your GPS or behind the headrest as a tablet stand for games and movies for kids. Flex Flap can be used as an iPad stand for easier recipe viewing while cooking in the kitchen.. UNIVERSIAL DESIGN - The Flex Flap's flexible and adjustable design makes it compatible to any device iPhone, iPad air, Android phone, Android tablet, any mobile phone with any case. Keep your purse close by hanging it on any chair or table at dinner, making it a fabulous travel accessories for women. Use it to hold up cook books in the kitchen or sheet music while playing an instrument. This cell phone holder has unlimited ways it can be used in your everyday life.. TRAVEL READY - Flex Flap will become one of your essential airplane travel accessories. It's sleek and compact design can be easily returned to it's original flat form to fit into any bag, purse or suitcase..

Precision Fit for EZ Pass MiniiPass Designed exclusively for the standard EZ Pass MiniiPass, FLLIK EZ Pass Holder guarantees a snap-in secure fit. Avoid toll reading errors with perfect alignment. Note Not compatible with EZ Pass Flex, olderlarger models, rectangular EZ Pass, Uni Pass, or Sunpass. Velcro Track Design This EZpass holder can be installed in any position without peeling off the velcro. Our EZ Pass holder for windshield is crafted from reinforced ABS plastic and flexible TPU, ensuring it won't crack or warp.. Foolproof Installation Attach in 3 seconds slide in your EZ Pass Mini without peeling off the adhesive strips, press suction cups to windshield - no adhesives or tools needed, compatible with all vehicles.. No Residue Instant Transfer Switch cars in seconds with removable ultra-strong suction cups that leave zero sticky residue on windshields. This Ezpass holder ideal for rentals, car-sharing, or multi-car householdsensures your EZ Pass stays firmly attached even on bumpy roads.. 99 UV Block Waterproof Shield Triple-layer coating blocks sun damage and oxidation, keeps your toll pass functional in any climate. Its durable construction ensures that our ez pass holder remains a reliable accessory for your automotive needs..

ONE HOLDER FITS ALL Fits all E-ZPass, I-Pass, QuickPass, 91Express lanes, EPass Xtra, Good-to-Go, and FasTrak including FasTrak Flex CAV, FasTrak Standard, FasTrak Flex, FasTrak Switchable and FasTrak HOV. QUALITY, COMPACT SLEEK Crafted from thick, heat-resistant plastic to withstand extreme temperatures without warping, melting or discoloring. Rounded edges and sleek contours provide a sturdy, safe, comfortable touch. Made in USA. ENGINEERING AT ITS BEST Designed by JL Safety's engineering using heat-resistant plastic to endure extreme temperatures. Features rounded edges, sleek contours, and a compact design with multiple suction cup sizes for a secure fit behind your mirror, ensuring unobstructed views and a comfortable touch.. INDUSTRIAL GRADE SUCTION CUPS Includes 3 suction cup options 2 small, 1 medium, 1 large for added stability, with patented rings that prevent light convergence and fire hazards see CAUTION photo.. ALL NEEDED PARTS INCLUDED The package includes a holder with 2 small suction cups and 2 dual-lock strips pre-attached to fit many toll passes, 2 extra dual-lock strips, 2 alcohol wipes, 1 medium, and 1 large suction cup. For toll passes with Velcro strips, refer to the instructions in the Replacing Velcro with Dual-Lock Strips photo to ensure compatibility with the holder.. DESIGNED FOR SAFETY JL Safety's design places suction cups behind the toll pass, preventing light convergence and eliminating the risk of burns or damage to your car interior, similar to the magnifying glass effect. Read the CAUTION photo to learn more.. NO ASSEMBLY REQUIRED 3M Dual Lock strips and small suction cups pre-installed for precise alignment, with no DIY required.. EASY INSTALLATION REMOVAL Quickly attaches to your windshield and removes easily with the conveniently placed suction cup tabs. Provides easy access to the Flex and HOV sliding switch models.. TRUST THE MAKER - Since 2007, JL Safety has been the leading manufacturer of parking tag and toll pass holders. Choose us with confidence, knowing we take pride in offering the highest quality holders, designed, patented, and made in the USA.. EASY INSTALLATION REMOVAL Quickly attaches to your windshield and removes easily with the conveniently placed suction cup tabs..

Patented Product Patent No. USD1018670S. Size fits all states 10.5 inches long x 4.8 inches wide. Suitable for most handicap parking signs.. Convenient to carry This handicap placard holder can be easily placed on the sun visor when not in use, making it easy to transfer and avoid searching for it everywhere.. Two display modes can be displayed by pulling down the sun visor or hanging it on the rearview mirror or car window.. Sturdy made of high-quality leather with good toughness and thickness. Better protect your sign from wear, bending, and tearing, and will not deform even in hot weather..

Upgraded EZ Pass holder ONLY fits EZ Pass Mini iPass the most common model, measuring about 3.7 x 1.9 inches. DOSE NOT fit the older larger EZ Pass. Does NOT fit EZ Pass Flex with HOV switch. Does NOT fit the new rectangular EZ Pass model. DOSE NOT fit Uni Pass or Sunpass model. EZPass Holders were designed so that you can transfer your EZ pass from vehicle to vehicle without leaving any sticky residue everywhere. Especially ideal to use for rental cars and easily removable to prevent theft. It also comes along with two suction cups that mount nicely to your windshield and will stay there unless its physically removed.. Environmentally friendly materialsDuralable quality . Made of solid plastic and super strong TPU.. Waterproof and UV Resistant. Our toll pass holders are waterproof and protect your ez pass from fading and breaking..

2023 Upgraded EZ Pass holder ONLY fits EZ Pass Mini iPass the most common model, measuring about 3.7 x 1.9 inches. DOSE NOT fit the older larger EZ Pass. Does NOT fit EZ Pass Flex with HOV switch. Does NOT fit the new rectangular EZ Pass model. DOSE NOT fit Uni Pass or Sunpass model. EZPass Holders were designed so that you can transfer your EZ pass from vehicle to vehicle without leaving any Velcro residue everywhere. Especially ideal to use for rental cars and easily removable to prevent theft. It also comes along with two suction cups that mount nicely to your windshield and will stay there unless its physically removed.. Environmentally friendly materialsDuralable quality . Made of solid ABS plastic and super strong TPU.. Waterproof and UV Resistant. Our toll pass holders are waterproof and protect your ez pass from fading and breaking..

Note It does not work with older or larger EZ Pass versions, the EZ Pass Flex with HOV switch, the new rectangular EZ Pass, Uni Pass, or Sunpass.Specifically designed for the EZ Pass MiniiPassthe most widely used model approximately 3.7 inches by 1.9 inchesthis EZ Pass Holder is tailored to its compact size.. EXTRA-STRONG SUCTION CUPS High-performance suction technology ensures a secure hold, even on rough roads. No slips, no fallsjust reliable toll access. RESIDUE-FREE EASY TRANSFER Switch vehicles in secondsno sticky residue or damage. Perfect for rentals, rideshares, and multi-car families. 5-SECOND INSTALLATION Just press go No tools, no adhesives. Includes alignment guide for perfect placement every time. ALL-WEATHER PERFORMANCE Designed to withstand extreme temperatures, from freezing winters to scorching summers, ensuring year-round reliability. Precisely engineered for standard EZ Pass MiniiPass 3.7x1.90.1, excluding olderlarger EZ Pass models, FlexHOV switches, 2022 rectangular versions, and UniSunPeach Pass systems.

2024 Upgraded EZ Pass Holder This EZ Pass Holder for Windshield is specifically designed to fit EZ Pass iPass devices measuring about 3.7 x 1.9 inches, ensuring a perfect fit for your toll pass transponder. It does not fit the older larger EZ Pass, EZ Pass Flex with HOV switch, the new rectangular EZ Pass model, or other brands such as Uni Pass, Sunpass or E Pass.. Secure and Convenient With super strong suction cups, this Ezpass Holder offers reliable and firm attachment to your windshield, keeping your toll pass securely in place while you drive. No more worrying about your EZ Pass falling off or getting lost during your daily commute. Easy Installation The EZPass holder makes installation a breeze. Simply slide in and attach it to your windshield using the included suction cups, and enjoy hassle-free access to toll roads without any Velcro or adhesive.. Easy Transfer Our iPass Holder allows you to effortlessly transfer your ez pass transponder from one vehicle to another, without leaving any Velcro residue behind. Say goodbye to the hassle of sticky remnants and enjoy a seamless transition between cars. Ideal for Rental Cars.. Durable and Long-lasting Crafted from high-quality materials. Toll pass holder is built to withstand daily use and harsh weather conditions. Rest assured that it will keep your toll pass safe and secure for years to come..

Made with PETG filament material.. Fits Fastrak Flex transponders with measurements 3.93 inch L by 1.58 inch W.. A transponder is not included. The item for sale is the holder only..

HIGH TEMPERATURE plastic, can withstand high heat. ANY SIZE transponder can be mounted. EZ PASS, I PASS, Fastrak. 4 ADHESIVE STRIPS included. Does not rattle.

FITS BOTH sizes of EZ-Pass. FITS NEW Fastrak. You don't have to remove adhesive strips from your unit. Can withstand high heat. Does not rattle.

With these clear static cling films, you can turn your regular stickers into removable static clings that can be easily peeled away from windshield leaving no trace behind and requiring no clean-up Prevents sticker damage to tinted glass. Sticks by static. No adhesive or solvents. Clings to smooth, glossy surfaces without leaving any sticky residue. Can easily be removed, repositioned, and reused. This static cling enables you to easily apply and transfer your windshield stickers again and again from car to car. Works with registration sticker, inspection sticker, city sticker, parking permit, and more. Please note that this product is designed to work with front adhesive stickers, which are printed with adhesive on top of the design and are meant to be applied directly to the INSIDE of windshield It will NOT work with back adhesive stickers.