Extended Handle DesignOur extended handle is longer than others in the market, it makes the job easier. Great camshaft sprocket tool for timing belt changes, cam seal replacement, cam gear removal, and camshaft pulleys installation. Also works on a diesel injection pump or water pump.. Adjustable Arm DesignAdjustable arm design fit the sprocket hole from 1-12 to 8-58. EWK camshaft sprocket tool provides the maximum working range in the market.. 4 Size hold Pin4 different size hold pins 6-10mm 0.24-0.39 in, 8-11mm 0.31-0.43 in, 10-12mm 0.39-0.47 in, 11-16mm 0.43-0.62 in. They can be applied to most of the camshaft pulleys in the market.. Heavy DutyPremium steel and strengthened heat treatment provide the heavy-duty class tool. Highly recommended by professional mechanics. 126 MonthDurable products backed by an extraordinary 126 months warranty..

Our 32mm 36mm fan clutch wrench set is perfect for certain Ford, GM, and Chevrolet models, as well as BMW M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32 and newer models. It's a multi-tool that's more affordable and higher quality than similar products on the market.. Practical Design The 32mm 36mm fan clutch nut wrench tool has undergone rigorous engine tests to ensure it's fully fitted and practical, helping you save money on repairs.. High-Quality Material Our 2-piece fan clutch wrench set is made of high-strength steel with precise dimensions and has undergone many actual vehicle tests. The rubber handle covered in the middle helps prevent hand fatigue during prolonged use.. Easy to Use This clutch wrench set is easy to use and can remove and install the fan clutch and water pump pulley bolts. It's perfect for professional mechanics and DIY enthusiasts.. Perfect Warranty Service ZKTOOL provides all the necessary information for each product and has excellent warranty service. If you have any questions, please contact us, and we will respond within 24 hours..

The fan clutch removal tool kit consists of 5 fan clutch wrenches in various sizes 22mm, 36mm, 40mm, 47mm, 51mm and a pulley holder equipped with four pairs of pins.. This specialized fan clutch tool kit is specifically designed for removing and installing fan clutches during repairs or replacements of water pumps, timing chains, or fan clutches.. The pulley holder, along with its four sets of replacement pins, is designed to securely trap and hold bolt-on pulleys using the mounting bolts. It is compatible with most vehicles and newer Chrysler engines that have press-on pulleys requiring special pins for housing retention.. Constructed from forged steel, this fan clutch tool kit offers exceptional strength, while its black finish provides enhanced corrosion resistance, ensuring long-lasting durability.. The fan clutch wrenches are compatible with Ford Trucks 2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines, Dodge Trucks 3.9L, 5.2L, 5.9L, 8.0L, V10 engines, GM Trucks 4.3L, 5.0L, 5.7L engines, ect..

Package includes - 1 Pc 36mm x 32mm Wrench ,1 Pc Fan Clutch Holder. Top Quality Material - Adopted almost the toughest tool steel material on the market, each one is further galvanized to resist wear, tear, and corrosion under even punishing use.the wrench is covered with rubber process, which is different from the wrenches on the market in feel, more comfortable and non-slip in hand.. Fitment - Fan Clutch Holder fits for BMW engine models M10,M20 ,M30,M40, M44,M50,M52,M52TU,M54,M56,M60, M70,M73, S14, S38, S50B30, S50B32, S54. Features - This 2 piece tool set includes an extra-long 32mm wrench and purpose built holding tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines, compatible with most BMW E-series sedans including the E34, E36, E39, E46, E90, and more. Easy to Use - The 1'3 fan clutch wrench and holder are specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly and easily.

Gearwrench's Fan Clutch Service Set covers most vehicles with bolt on pulleys. Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing. Features the patented universal PULLEY holder. Fan nut wrenches included 22mm, 36mm, 40mm, 50mm, diesel. Durable blow mold case for tool retention.

Quickly removes and installs fan clutch when repairing the water pump or fan clutch.. Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary.. Set includes 7 driving wrenches that fit Ford, GM, Chrysler Jeep. Set now includes 78, 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-78and 2 are still included in the set. 1-12 41mm and 42mm are still available individually.. Use with an air hammer. Includes blow molded storage case..

GM Water Pump 4 Pin Fan Clutch Pulley Holding ToolVehicle Specialty ToolsProfessional.

Use with an air hammer. Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Faster and easier than conventional fan clutch wrenches no holding wrench is necessary. For more information check the main Lisle tool- 43300. Replacement part for Lisle tool- 43300.

Quickly removes and installs fan clutch when repairing the water pump or fan clutch. Faster and easier than conventional fan clutch wrenches no holding wrench is necessary. For more information check the main Lisle tool- 43300. Replacement part for Lisle tool- 43300.

LOCKS ON, DOES NOT LEAK Grease goes in, not on the machine. LockNLubes unique sliding sleeve ensures that when the jaws are locked onto the Zerk, a leak-proof seal is created.. RATED TO 10,00 PSI. No matter what grease gun you use, the LockNLube Grease Coupler will not leak or pop off at any pressure up to 10,000 PSI. Easily releases with the thumb lever. No more fighting and twisting to disconnect.. ONLY REBUILDABLE COUPLER All LockNLube couplers include a rebuild kit Simply replace the seal and jaws and it is as good as new lowest lifetime cost.. COMPATIBLE WITH ALL GREASE GUNS AND GREASE FITTINGS 18 NPT works with all grease guns and manufacturers pneumatic, manual, or electric. Locks on to all Metric and SAE specification Zerk fittings.. HANDS FREE, LEAK FREE GREASING The LockNLube Grease Coupler is rated to 10,000 PSI 690 Bar and will not release under pressure. No hands are needed to align the coupler or keep it attached. End greasing frustration..

Nine driving wrenches. Ford, GM, VW, BMW, Chrysler and newer International.

Made to be the most reliable tools in the market today. Tool solutions for most all situations. Built to exceed tool standards. Tool set for removing threaded-on viscous fan clutches. Includes smaller spanner-type wrenches for engaging the hex nut on the fan clutch. Includes larger square drive tools to hold the water pump output shaft stationary. For use on ford, jeep and some imported vehicles. Kit 60 includes 10-Piece for removing threaded-on viscous fan clutches.

If there are any problems in use,You do not need to return the product, please contact us, we will solve for you.. Dimension Length 11.8in 30cm. Arms Opening Width 0.6in-4.7in 1.5cm-12cm.. Wide Applications Adjustable Screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots.. Package includes 1 Spanner Wrench with 2 detachable pins which have been already built-in.. Quality and Satisfaction Guarantee Every piece of product has been carefully checked before packaging. If you are not satisfied with your purchase for any reason, EURICA is pleased to refund you. We stand confidently behind our products with our satisfaction guarantee.

Flex-head crows feet set includes the following sizes Metric Size 38 Drive 12mm 14mm, 16mm, 17mm, 18mm, 19mm.. Made of premium chrome vanadium steel construction with black phosphate finish for maximum corrosion resistance.. Flex-Head design allows a full 180 of freedom for the head to angle, to reach tight spaces for more better coverage.. The flare nut open Hex 6pt profile offers a secure grip that provides more torque without damaging the fastener.. Special crow foot wrench set is ideal for removing flared fixings and softer metals, such as brake, fuel hydraulic lines..

Wrenches are made from high-quality chrome vanadium steel, additional mirror finish improves the corrosion resistance of the surface and effectively prolong the service life. DURATECH 22-Piece ratcheting combination wrench set makes emergency repairs a breeze.. 72 teeth perfect precision with slim profile. The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. Top-quality hand tools for every repair project.. 22-piece SAEMetric ratcheting combination wrench set that meets ANSI standard includes 11METRIC11SAE unbreakable wrench Metric 6mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and SAE 14, 932, 516, 1132, 38, 716, 12, 916, 58, 1116, 34. Standard and metric measurements ensure that you have the right tool to tackle any screw or bolt.. Tool roll for convenient storage and taking. The tool roll case has each wrench size printed which makes organizing easy.. This comprehensive collection of open-ended and ratchet wrenches is a must-have for your roadside emergency kit. They roll up neatly in an organizer bag for storage in your car trunk or mechanics gear..

WIDE COMPATIBILITY The 43300 pneumatic fan clutch wrench kit removal tool kit compatible with Ford, Chrysler, GM and Jeep, 4.3L, 5.0L, 5.7L GM pick up.. 7 DRIVING WRENCHES SIZES Clutch wrench kit includes 32mm, 36mm, 40mm, 47mm, 78'', 1-78'', 2'' driving wrenches, and 1x 17'' long handle with a storage bag. Please confirm the appropriate size before purchase.. EASY TO USE Just slip the tool into the air hammer select the correct wrench size for the fan nut and a couple of pops of the air hammer and the fan clutch is loose. No need for any other special pinning tools. Note Air Hammer is NOT included. HIGH QUALITY Wrenches are made of sturdy steel with black finish, ensures high strength and durability, great resistance to corrosion and rust.. EASY STORAGECARRY The blow-molded plastic case keeps everything well-ordered and easy to store or transport between jobs..

Durable Material This 32mm 36mm fan clutch removal tool is constructed from premium high strength steel, which has strong hardness and not easy to be broken or bent. There is a layer of rubber in the middle part, rust-proof and does not hurt your hands.. Automotive Fan Clutches The ATPEAM 32mm 36mm fan clutch wrench removes lock nuts on temperature-dependent thermo-viscous fans, one wrench with two size make the work easier.. Easy to Use Place the wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm both included spanner to undo nut.. Wide Application The fan clutch removal tool kit is compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54, also compatible with some Ford, GM, and Chevy models.. Package Included 1 x 32mm and 36mm fan clutch removal tool, one wrench with two size 32mm 36mm..

Fitment Compatible with Ford, GM, Chrysler Jeep, fit for 4.3L, 5.0L, or 5.7L GM pick up van, mini-van, or SUV. Kindly note please make sure the size you need before purchase. 7 Driving Wrenches Sizes 78, 32mm, 36mm, 40mm thin and 47mm size to fit Ford 6.0L and 6.4L Powerstroke diesel pickup. 1-78 and 2 are also included in the set.. Easy to Use Just slip the tool into the air hammer select the correct wrench size for the fan nut and a couple of pops of the air hammer and the fan clutch is loose. No need for any other special pinning tools. Note Air Hammer is NOT included. High Quality made of sturdy steel, ensures high strength and durability, great resistance to corrosion and rust.. Coming with Premium packaging box, convenient for storage..

Repairing the water pump or fan clutch with pneumatic fan clutch wrench will be more efficient than a manual wrench to remove and install.. MUHERRIT fan clutch removal tool kit include different size wrench, such as 78, 1-78, 2, 32mm, 36mm, 40mm thin, and 47mm.. All fan clutch removal tool set is made of sturdy steel, and adopts anti-rust coating process, easy-maintain.. Simply put the fan clutch tool into the air hammer, select the appropriate size of the fan clutch wrench, then a few blows of the air hammer, the fan clutch will loose. No other special fixing tools are required. Pneumatic fan clutch wrench will come in package box, convenient for storage and carry.