Compatible with most V6 V8 GM active or dynamic fuel management motors, includes cars, trucks SUVs.. Keep your vehicle in V8 model with full power. Disable 4 cylinder mode on your car and fit for a wild range of GM V8 V6 vehicles.. Plug and play, install without any tools. Pls unplug the OBDAFM Device if it's not used for a long time.. Leaves no trace, Unplug it to return to factory settings. This AFM Disabler does not reprogram your factory ECU.. When the device was plugged into the port, blue lights will flash in sequence and then turn off. It just indicated that the device was connected and working normally..

Keep your vehicle in V8 mode Disable 4-cylinder mode on all GM active fuel management vehicles. Full Power all the time.. Plugs into diagnostic port with no tools needed. Simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM system.. Does not reprogram factory ECU. Leaves no trace. Unplug it to return to factory settings.. Please disconnect your battery before installing.. Power to the people. Increased throttle response and more consistent power delivery across the entire power band..

Compatible with V6 V8 General Motors GM active or dynamic fuel management vehicles, includes cars, trucks, and SUVs.. OBDCAR AFM DFM Disabler allows your V6 V8 GM vehicle to run in full cylinder mode at all times, preventing the Active or Dynamic Fuel Management system from dropping cylinders.. Fast and easy setup simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFMDFM system.. Will not reprogram your factory ECU, unplug it to return to factory settings.. Please confirm the compatibility before ordering it..

AFMDFM Disabler Compatibles with most V6 V8 GM Motors.. Keep your V6 or V8 GM motors to run in full cylinder mode at all times.. Just plug it into your vehicle's OBD-II port and it will immediately start working to eliminate the AFMDFM system.. Will not reprogram your factory ECU, Unplug it to back to factory settings.. Please verify if your model is appropriate prior to making a purchase..

Core Fuel Saving Technology the SUPVOX Magnetic Car XP-2 is a vehicle magnetic fuel saver designed to reduce fuel consumption and extend mileage by optimizing fuel combustion efficiency without the need for fuel line modifications. Emission Reduction Capability This magnetic fuel optimizer contributes to a 50 reduction in carbon monoxide and hydrocarbons emissions, assisting vehicles in passing emission testing and promoting cleaner exhaust output. Enhanced Engine Performance the XP-2 economizer improves engine performance with quicker starts and helps prevent scale buildup and corrosion inside the engine, which can reduce wear on critical components like O2 sensors and. Universal Application and Easy Installation Compatible with cars, buses, trucks, scooters, motorcycles, generators, and ambulances, this fuel conditioning magnet installs simply without tools or cutting fuel lines, by placing the magnet close to the engine secured by the cable. Compact and Lightweight Design Measuring approximately 1.45 x 3.54 x 1.18 inches and weighing 7.72 ounces, the compact size of this magnetic fuel saver allows convenient placement in various vehicle engine compartments without interference.

Boosts Performance Cuts Fuel Use Save up to 15 on fuel while enhancing your vehicles performance tackle hills and merge on highways with ease, all while balancing efficiency and smooth driving dynamics.. Fits Most Vehicles Designed for wide compatibility, the blue color is suitable for most diesel vehicles. No matter your model, it can be seamlessly adapted to your vehicle system for a hassle-free experience.. Smart Adaptive Technology After your first use, it auto-adjusts to your engines settings. Over time, it learns your driving habits to maintain consistent fuel savings.. No tools or skills required Locate your cars OBD port, plug in the device, turn the car key to ignition do not start the engine, then press the devices reset button for5 seconds. Release the button and wait 3054 seconds for it to connect to the ECU. Start the engine, the device will auto-identify your vehicle and driving habits. After200km 150 miles of run-in, it will auto-adjust to optimize engine power.. After Sale If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays..

Keep your vehicle in V8 mode Disable 4 cylinder mode on all GM Active Fuel Management Vehicles. Installs in seconds Plugs into diagnostic port with no tools needed. Does not reprogram factory ECU Leaves no trace. Full power all the time Increased throttle response and more consistent power delivery across the entire power band.

Manufactured to original factory specifications.. Simple to operate and easy to install.. Good quality and long service life.. Stable performance, easy and convenient to use.. Please check the model number carefully before ordering to make sure it can be used..

Fuel Efficiency This OBD2 ECOOBD2 Car Plug Driver lowers fuel consumption and reduces emissions by optimizing the engine's fuel efficiency. It helps vehicles achieve more efficient fuel use by adjusting parameters in the engine control unit ECU.. Smooth Driving Feeling The ECOOBD2 enhances driving comfort by optimizing the vehicle's power output and making driving smoother, especially when accelerating and climbing hills.. Fault Code Reading The ECOOBD2 not only regulates the performance of the vehicle, but also has a fault diagnostic function. It can read the fault codes in the OBD2 system to help owners understand the health of their vehicles.. Plug and Play The ECOOBD2 plug is designed to be simple, users just need to plug it into the vehicle's OBD2 port, start the engine and the device will start working. No additional settings or tools are required, so it is very easy to use.. Strong Compatibility This OBD2 ECOOBD2 Car Plug Driver is suitable for most of the vehicles that support the OBD2 protocol, including many cars, SUVs, and light trucks with a wide range of applications..

Smart Electric System Stabilization More Consistent Fuel Burning Helps smooth voltage fluctuations from your cars electrical system, promoting more stable fuel ignition and combustion. Experience steadier acceleration, reduced throttle lag, and less wasteespecially during stop-and-go city driving.. Maximize Every Tank Drive Farther, Refuel Less Optimizes fuel efficiency without changing your driving habits. Extends driving range per fill-up, helps you go farther on highways and road trips. Spend less at the pump and reduce frequent refueling stops.. Plug Play No Tools or Mechanic Needed Inserts directly into your vehicles 12V cigarette lighter socket or OBD2 port in seconds. No wiring, no cutting, no professional installation. Compact and portable design fits easily in your glove box or armrest when not in use. Works on most gasoline, diesel, and even hybrid vehicles.. Smoother Driving Improved Throttle Response Unlike passive fuel magnets or chips, this upgraded fuel sync device helps stabilize real-time electrical signals, leading to smoother acceleration and more responsive engine performance. No replacement parts neededjust plug in and feel the difference.. Universal Fit 2PCS for Multiple Vehicles or Backup Compatible with most cars, trucks, SUVs, and RVs. Use one in your daily driver and another in a family vehicle, or keep as a replacement. Durable, compact design adds no dashboard clutter and works quietly in the background for long-term fuel savings..

Helps reduce expenses on each journey designed for long-term value and practical use for daily commutes and road trips alike.. Features a small, space-saving form factor that fits seamlessly in cup holders, center consoles, or any unused corner of your car.. Simple setup and intuitive controls allow for immediate use without complicated instructions or technical knowledge.. Built with high-quality materials to withstand daily use and varying vehicle conditions for reliable performance over time.. Works with most standard vehicle models no special tools or professional installation required for quick and easy setup..

Keeps fuel fresh for up to 24 months during storage. Eliminates the need to drain fuel prior to storage. Ensures quick, easy starts after storage. Prevents gum and varnish build-up. Effective in all gasoline, including Ethanol blends.

2pcs. Fuel saver pro. ZULUZHONGYUAN.

Keeps your car in full cylinder mode all the time, no more shuddering or dropping cylinders.. Compatible with V6 V8 General Motors GM active or dynamic fuel management vehicles, includes cars, trucks, and SUVs.. No installation required, simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFMDFM system.. NOT compatible with 2019 Silverado and Sierra models equipped with 5.3L 6.2L motors and 10-speed transmissions.. Will not reprogrammed the factory ECU..

The CP4 Pump is prone to failure if the fuel system has any water or contaminated fuel introduced to it. When the pump fails, it will send metal contaminants throughout the entire fuel system which in most cases will ruin the injectors and other sensors and cost you several thousand dollars.. The System Saver Inlet Valve was designed to offer you peace of mind in the event of a CP4 Pump failure. The important difference between the OEM valve and the System Saver is the improvement made to the screen, which is upstream of the valve inlet. The OEM screen is a single 80 micron layer, and is a very flimsy design. In extreme cases the factory screen can actually tear, introducing massive amounts of debris from the failed pump into the injectors.. The System Saver Valve screen is rated at 25 microns and is wrapped in two layers. This improved micron rating and double wrap construction will do a much better job of keeping debris from entering the rest of the fuel system. It is also constructed in a manor where it will not be able to tear or de-laminate from the filter housing.. Another benefit to the screen is the fact that it will load up quicker than the factory screen in the event of a pump failure. This will choke off the valve sooner, which will bring the truck out of service and shut it down in a shorter amount of time. This is all positive for improving the chances injectors won't need to be replaced when a pump has failed.. Exergy has also flow tested the valve with the upgraded filter and there is no measurable loss of pump performance with the finer screen, even with a 10mm stroker CP4 pump at 4500 RPM. The screen and housing are constructed from stainless steel for corrosion resistance. And, as always, you can trust that Exergy products have been properly de-burred and are assembled using appropriate processes to ensure proper cleanliness..

AFMDFM Disabler keeps you in full power 100 of the time. Simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM system. Leaves no Trace - Unplug it to return to factory settings. This AFM Disabler does not reprogram your factory ECU. Full power delivery all the time without factory warranty concerns. Fits all V6 V8 General Motors GM active or dynamic fuel management vehicles, includes cars, trucks SUVs. Note This AFM Disabler is not currently compatible with 2019 5.3L 10-speed or 6.2L 10-speed models, and keep V8 may cause excessive water temperature in some car. Buy with confidence - Our promise Free return within 6 months if the AFM DFM disabler not working properly.

1.AFMDFM Disabler Device RA003 Compatible with most GM V6 and V8 vehicles.. 2.AFM RA003 keeps the vehicle in the V8 mode all the timehelp your car get super power.. 3. Plug and play, install without any tools.Please unplug the product,when you do not use this for a long time.. 4. Keep the factory ECU, not programming the ECU of the vehicle, and does not affect other functions of the vehicle, but the modified vehicle is cautious to buy.. 5. Please note V8 mode will keep all the cylinder running, the water temperature may increase during driving. The product currently not compatible with 2019 5.3L 10-Speed or 6.2L 10-SPEED models..

The Range AFMDFM Disabler allows your V6 or V8 vehicle to run in full cylinder mode at all times, preventing the Active or Dynamic Fuel Management system from dropping cylinders.. Our patented technology is the only product that will disable Active or Dynamic Fuel Management without reprogramming the factory ECU. Full power delivery all the time without factory warranty concerns.. Range AFMDFM Disabler keeps you in full power 100 of the time. Simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFMDFM system. The power and control you need in any situation.. The Range AFMDFM Disabler does not reprogram your factory ECU. Leaves no trace. Unplug it to return to factory settings Compatible with all V6 and V8 GM active or dynamic fuel management vehicles, includes cars, trucks, and SUVs.. Please check compatibility.

-Compatible with select Buick, Cadillac, Chevrolet, GMC, Isuzu, SAAB, Pontiac, Saturn Suzuki GM vehicles. -Keeps you in full power 100 of the time, no more shuddering or dropping cylinders. -Fast and easy setup simply plug into your onboard OBD-II port and it instantly begins working to eliminate the AFM system. -Does not reprogram your factory ECU, unplug it to return to factory settings. -Red LED version.