With this PowerTap Receptacle,you can expand any Power Tap to accommodate up to four separate,Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery.. Cable Length19.7 inches 50 cm. We can customize cables with other length, please send a message to us if you need.. At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking.. Every item will be sold until they were tested and turned out to be no short circuit, no latent breakdown problems. If the cable you received is defective, please contact us immediately.. Plug A D-tap Male Connector Plug B 4 Port D-tap Female Connector..

D-tap splitter hub allows you to power multiple cameras and devices at the same time from V-Mount, Gold-Mount Battery or other power source with D-tap output. Featuring d-tap female sockets of different directions, the cable allows you to change the direction of dtap.. The cable comes with a 14 screw, making it easily and firmly mounted on your camera rigs or device.. Plug A D-tap Male Connector Plug B 4 Port D-tap Female Connector.. Cable Length 15.7 inches 40cm. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order.. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once..

Professional Power Solution Enables power from any D-Tap output Gold MountV-Mount batteries to gear with a standard LEMO-compatible 2-pin 0B male input.. Industry-Leading Compatibility Compatible with Teradek BondBolt, Blackmagic PYXIS 6K, ARRI Alexa, RED Komodo, Z CAM E2, SmallHD, DJI Ronin RS2RS3 Pro, Preston, Paralinx, and more.. Reliable On-Set Power Ideal for powering monitors, wireless transmitters, EVFs, and cameras in professional production environments. Designed for long-term reliability.. Durable Flexible Design Built with rugged connectors and soft, professional-grade cabling for smooth integration into cages, gimbals, and handheld rigs.. Extended 59-Inch Length 150cm cable provides generous routing length for complex rigs. Custom lengths available on request.. 247 customer support. One-year limited warranty.

You can expand any Power Tap to accommodate up to four separate with our D-Tap male to 4-port female connector. This 4 Port Splitter Power Cable is Perfect for powering multiple wireless receivers, Camera monitors, and other D-Tap output photographic power.. Our cables are equipped with strain relief devices at the cable ends to reduce stress and prevent them from breaking, so our cables are durable.. Plug A D-tap Male Connector Plug B 4 Port D-tap Female Connector.. Max Work Current 10 amp max total. Cable Length 47 inch120cm, please contact us if you need other lengths.. Easy to use Power D-Tap outputs, Coiled power cable for a flexible reach and neat setup..

Connect D-Tap Sources to Your Device. Additional 8V DC Out Port to Daisy Chain and Power Accessories. Input Voltage 8V - 17V Output Voltage 8V Regulated Output Current 2A. Notice Not for use with lights or high-current devices. Misuse may result in overheating or product failure. Ultra-Durable Nylon Braided Reinforced Connectors. Compatible with Many brands, cameras, monitors, lights, accessories, Sony, Small HD, Lilliput, Edelkrone, motorized sliders, sound mixers, follow focus, and more. KONDOR BLUE LIFETIME WARRANTY.

D-Tap Power Splitter Cable Convert a single D-Tap output into 4 separate D-Tap female portsperfect for powering multiple devices from one power source.. Wide Compatibility Works seamlessly with ARRI RED cameras, TILTA rigs, Steadicams, IDX batteries, Anton Bauer V-Mount systems, and more.. Built-In 14 Screw Mount Convenient mounting screw allows you to attach the splitter hub directly to your camera rig, cage, or any gear with 14 thread support.. Durable Safe Features built-in strain relief at cable ends to prevent breakage and extend product lifespan. Supports a maximum current of 10 amps total.. Customizable Lengths Available Standard cable length is 150cm 59 inches. Custom lengths and colors available upon requestplease contact us before ordering..

This splitter hub has a 14 screw. It can be easily mounted on the camera rig or other device. Plug A D-tap male.. Plug B 4-port D-tap female.. Cable length40 cm about 15.7 inches. The length of the cable and the color can be customized. If you need, please contact us before placing order.. After-sales guaranteeAll Uonecn products are 100 fully tested and inspected before shipment to ensure that customers get qualified products, if the cable does not work, please contact us immediately. We will solve the problem properly.

Power Up to 4 Devices Simultaneously Split one D-Tap output into four with this compact and efficient power hub for monitors, wireless transmitters, and accessories.. Universal Compatibility Supports V-MountGold Mount batteries, compatible with RED, ARRI, SmallHD, Teradek, TILTA, Steadicam, IDX, and more D-Tap-enabled devices.. LED Power Indicator Built-in LED light lets you instantly verify power connection and system readiness to prevent mishaps during shooting.. Secure Mounting with Screw Easily attach the splitter to cages, rigs, or camera setups using the integrated 14-inch D-ring screw, reducing cable clutter on set.. Reinforced Cable Ends for Durability Engineered with strain relief protection to prevent breakage, making this splitter ideal for frequent professional use..

For Ninja V Smallhd 702 touch monitor, Video Devices PIX-E7 PIX-E5 7 touchscreen display, Lectrosonics venue VR IFB and Hollyland Mars 400s. Make your Rig and the locking mechanism is very helpful so the cable doesnt get dislodged if accidentally pulled.. Cable Length 50cm, Locking DC Sperical design for monitor. This Cable is OEM, Not List By Official.

Universal Compatibility Supports V-MountGold Mount batteries, compatible with RED, ARRI, SmallHD, Teradek, TILTA, Steadicam, IDX, and more D-Tap-enabled devices.. Power Up to 4 Devices Simultaneously Split one D-Tap output into four with this compact and efficient power hub for monitors, wireless transmitters, and accessories.. Secure Mounting with Screw Easily attach the splitter to cages, rigs, or camera setups using the integrated 14-inch D-ring screw, reducing cable clutter on set.. LED Power Indicator Built-in LED light lets you instantly verify power connection and system readiness to prevent mishaps during shooting.. Reinforced Cable Ends for Durability Engineered with strain relief protection to prevent breakage, making this splitter ideal for frequent professional use..

This locking dc to Dtap cable is to power Atomos Ninja Shogun Shinobi, Blackmagic Video Assist 12G-SDIHDMI Monitor, Smallhd 702 touch INDIE 7 monitor, Lectrosonics venue VR IFB SR receiver, Hollyland Mars 400s Pyro H Pyro S, Zaxcom IFB100IFB200 Transmitter, Video Devices PIX-E7 PIX-E5 7 touchscreen display.. Equipped with a secure locking DC connector to prevent accidental disconnection and ensure uninterrupted operation.. Draws reliable power directly from a V-mount or Gold-mount battery or other power supply source with a D-Tap output port.. Plug A D-tap Male. Plug B Right Angle Locking DC 5.52.5mm. Cable Length 60CM 2ft. We can customize cables with other length, if you need custom cables, please send a message to us before making the order.. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once..

You can expand any Power Tap to accommodate up to four separate with our D-Tap male to 3-port female connector. This 2 Port Splitter Power Cable is Perfect for powering multiple wireless receivers, Camera monitors, and other D-Tap output photographic power.. Please ensure the positive and negative poles are connected correctly, as improper connections can damage the USB port. Before connecting other devices, check that the indicator light is on. This helps protect your device, even if the connection is not perfect.. Plug A D-tap Male Connector Plug B 2 Port D-tap Female Connector. Our cables are equipped with strain relief devices at the cable ends to reduce stress and prevent them from breaking, so our cables are durable.. Input voltage 14.8v. Max Work Current 10 amp max total. Cable Length 59 inch150cm, please contact us if you need other lengths.. Easy to use Power D-Tap outputs, Coiled power cable for a flexible reach and neat setup..

Professional 12V D-Tap Power Cable Connect your field monitors and other production gear with this D-Tap to DC 5.5mm x 2.5mm barrel power cable. Designed for use with V-Mount and Anton Bauer Gold Mount battery systems, it's a must-have for professional video and broadcast setups.. Right Angle DC Connector Equipped with a 5.5mm x 2.5mm right-angle DC plug for cleaner cable routing and reduced strain on your equipments input port, ideal for compact DSLR rigs and gimbal setups.. Direct Power Transfer No Voltage Regulation This cable transfers unregulated 12V directly from your D-Tap output. Ensure your power source matches your devices input voltage to avoid damage.. Built for Rig Integration Connects to D-Tap outputs on Gold MountV-Mount batteries, battery plates, and cameras with onboard D-Tap ports. Perfect for powering monitors, recorders, wireless video systems, and LED lights on professional rigs..

High Customization This D-Tap splitter is designed to expand multiple D-Tap power outputs. 3 channels of intelligent shunt, no interference with each other, can be connected to the V-MountGold mount battery, and can provide stable power supply to up to 3 independent devices at the same time.. Voltage Display With real-time voltage display, the battery level can be understood through the voltage display during the shooting process to ensure the normal progress of shooting.. Easy Installation It can be easily attached to the camera rig or equipment with 14 mounting screws. Hex wrench is included for tightening 14 screws.. Safe And Reliable The splitter supports a maximum current output of 8A. Built-in smart chip, with 149 Fahrenheit over-temperature protection, over-current protection, short-circuit protection, input reverse protection, output anti-backfill protection.. Specifications Straight cable length 23.62inch . Inputoutput voltage 11-16.8V. Operating temperature -4F149F..

High Customization This D-Tap splitter is designed to expand multiple D-Tap power outputs. 3 channels of intelligent shunt, no interference with each other, can be connected to the V-MountGold mount battery, and can provide stable power supply to up to 3 independent devices at the same time.. Voltage Display With real-time voltage display, the battery level can be understood through the voltage display during the shooting process to ensure the normal progress of shooting.. Easy Installation It can be easily attached to the camera rig or equipment with 14 mounting screws. Hex wrench is included for tightening 14 screws.. Safe And Reliable The splitter supports a maximum current output of 8A. Built-in smart chip, with 149 Fahrenheit over-temperature protection, over-current protection, short-circuit protection, input reverse protection, output anti-backfill protection.. Specifications Coiled power cable length 11.8inch maximum stretch length 31inch. Inputoutput voltage 12-16.8V. Operating temperature -4F149F..

This 2 pin to D-tap power cable enables you to power Blackmagic Pyxis, Teradek Cube Bolt Bond Link, SmallHD Cine 7 Indie 7 ULTRA 7 703 Monitor, Z CAM E2 Camera, DJI Ronin RSC RS2 RS3 Pro Stabilizer.. Power from a v-mount gold-mount battery or other power source with d-tap output.. Plug A Standard D-Tap Male Plug B Straight 0B 2 Pin Male Connector.. Cable Length 45cm about 18in in stock. We can customize cables with other length, please send a message to us before making the order.. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesnt work. We will solve the problems properly or send you a new replacement at once..

Professional Power Solution Designed to power cinema cameras, monitors, and lighting equipment with a 4-pin XLR input using industry-standard D-Tap battery systems such as V-Mount and Anton Bauer.. Right-Angle XLR Connector Low-profile, right-angle 4-pin XLR female connector minimizes cable strain and saves space, perfect for compact rigs, camera cages, and tight on-set configurations.. Broad Equipment Compatibility Compatible seamlessly with Sony VENICE, BURANO, F5, F55, Blackmagic URSA Mini Pro, Canon C400, Panasonic Varicam, ARRI camera monitors, TV Logic field monitors, LED panels, and director monitors.. Durable, Production-Ready Build Features rugged metal connectors and a heavy-duty cable jacket built to withstand demanding studio and field environments. Trusted by DPs, DITs, and professional videographers.. Secure Stable Power Delivery Provides consistent, uninterrupted power for critical equipment during long shoots, interviews, and live productions..

Extend Your D-Tap Power Output Designed to extend power from any D-Tap battery source, this D-Tap Male to Female cable lets you position battery plates or power accessories with greater flexibility on camera rigs.. Wide Compatibility for Professional Gear Compatible with Anton Bauer, IDX, V-Mount Gold Mount batteries, DSLR camera rigs, as well as ARRI, RED, monitors, wireless systems, and on-set accessories powered via D-Tap.. Secure Reliable Power Transfer Features a 2-Pin D-Tap Male to D-Tap Female connector made to deliver stable power for long shoots without interruptions.. Flexible 59 150cm Length The generous cable length allows for neat and versatile rig configurations, whether handheld, shoulder-mount, or gimbal setups.. Durable Fully Tested Every cable is individually inspected to ensure long-term performance and reliability. Backed by a 1-Year Warranty and fast customer support..

Bi-direction PD Fast-Charging SmallRig VB50 mini V Mount Battery boasts lightning-fast charging capabilities, supports a wide range of fast charging protocols PD QC SCP PPS APPLE-2.4A etc.. It supports high power USB-C bi-directional PD fast chargedischarge up to 45W. The USB-C port delivers 45W PD fast charging for your cameras, smartphones, tablets and laptops, making your charging faster. With a maximum power of 45W, you can have a full charged battery in just 2 hours.. Rich Interface With USB-C, USB-A, DC 5.5 x 2.1mm 8V, DC 5.5 x 2.5mm 12V, BP and D-TAP ports, this V mount battery is highly versatile and can power multiple devices simultaneously. It can be used to power DSLR cameras, camcorders, monitors, smartphones, wireless video transmitters, tablets and laptops. Additionally, it features a 14-20 and 38-16 threaded hole on the V-lock, allowing it to be secured with a ball head or other clamp.. High Capacity Battery SmallRig V mount battery with high capacity of 3400mAh 50Wh14.8V, built-in high-quality LG power battery cells, to bring powerful battery life for long video making and photography projects, good power backup solution for photographers and filmmakers. Apart from this 50Wh battery, We also have 99Wh V mount battery 3580Asin B0B6Z9K42P, VB99 Pro 4292Asin B0CLGQDFCG, 155Wh 3581AsinB0B6ZCNF1P and 212Wh 4293Asin B0CYSW6R9P, meet your different capacities needs.. Advanced BMS Technology Equipped with an intelligent Battery Management System BMS, this V mount battery ensures optimal performance and safety. Enjoy peace of mind knowing your power source is protected against short circuit, over-temperature, over-voltage, over-current, over-charge and over-discharge. This battery has passed the certification of CERoHSFCCUKCAISEDRCMMSDSUN38.3IEC 62133UL2054UL62368, more safe and reliable.. Status at a Glance On the front of the SmallRig V-mount battery is a bright, crystal clear OLED screen display, and you can also keep track of the battery's working status at all times via its OLED screen. Note The status button is only used to wake up the screen and check the battery condition, cannot turn off the battery.. Pocket-size Airline Friendly Palm size, only 4.21 x 2.87 x 1.33 inches, only 11.64oz, about 30 smaller than traditional V-mount batteries, fits easily in backpacks and pockets, say goodbye to bulky, airline friendly feel free to carry outside and travel. Made by quality fireproof ABS and PC shell frosted, non-slip design on both sides to provide you with comfort while improving your grip..

Two-way pluggable D-tap adopts a 3x4 port design, no matter from the front or the reverse direction, the device can be quickly plugged into the socket.. With extra 2 DC output 8V and 12V for more camera monitors, led lights, and other DC devices. USB 5V-2.1A output can also supply power for cell phones or other devices.. Cable Length 4.3inches 11cm, max stretched up to 39inches 100cm.. Plug A D-tap Male Connector. Plug B 4 Port D-tap Female Connector. Plug C USB 5V2.1A. Plug D DC 8V. Plug E DC 12V.. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once..

D-Tap male connector to 4-port female connector.. With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate.. Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery.. Max work current 10 amp max total.. The min length when coiled is 4 inches 7.5 inches 4 inches, total 15.5 inches. The max length when stretched out can be 40 inches.Custom Length other length of the cables, we could customize with it, please contact with me..

With one 14and one M4 screw threads, you can mount the splitter box on Ronin 2. When the splitter box is fixed, it is more convenient for you to shoot.. The outer casing of splitter box is all made of aluminum, which largely promotes the durability and stability of this cable.. With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate P-taps, Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery.. Plug A D-tap Male Connector Plug B 3 Port D-tap Female Connector. Unstretched Length19.7 inches 50 cm. Stretched Lengt 39.4inches1M. We can customize cables with other length, if you need custom cables, please send a message to us before making the order.. At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking..

Universal Compatibility Compatible with Canon C70, Atomos ShogunNinjaShinobi, Blackmagic Video Assist, SmallHD Indie 7, KiPRO LCD monitors, Lectrosonic, Lowel Blender LED, Feelworld F6 PlusLUT7S, Portkeys PT5PT6, and more. The DC plug output voltage is the same as the battery voltage. Please check the device's input voltage range before use.. D-Tap to Right Angle DC Plug Features a D-Tap P-Tap male connector to a 5.5mm x 2.1mm DC right-angle plug, designed to save space and reduce strain on ports, ideal for compact and rigged setups.. Reliable 12V Power Supply Transfers unregulated 12V directly from V-Mount or Gold Mount batteries, Gold Mount plates, or camera D-Tap ports to your devices for continuous power in professional environments.. Durable, Production-Ready Build Made with premium materials and professionally tested for safety and performance. No voltage regulator included, ensure your battery output matches device requirements.. 7 24 Support..

Wide CompatibilityThis D Tap to DC Cable is designed to power your Atomos NinjaShogunShinobi Monitor,for Blackmagic Video Assist, SmallHD 702Indie 7 Monitor, for Feelworld FW568F5F6S55LUT7S Monitor, Portkeys PT5PT5 IIPT6LH7PLH7H Monitor,for Hollyland Mars 4K Wireless transmission system from a v-mount battery or a v-lock battery plate with d-tap power supply.. Ultra Soft Durable Red CableMade from New Liquid Silicone material, cable feels soft to the touch, flexible and not easy to knot. Being able to withstand more than 25000 bending tests and strains, greatly improves its service life. Just wipe it gently with an alcohol pad, to keep it clean as new.. ConnectorsPlug A Standard D-Tap Male, Plug B Right Angle 5.52.5mm DC male,also compatible with 5.52.1mm DC. LengthCable Length 60CM 23.6inches. We can customize cables with other length, please send a message to us before placing the order.. Excellent ServiceEvery cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesn't work. We will solve the problems properly or send you a new replacement at once..

This ultrashort D-tap splitter power cable is perfect for saving room during your shooting and avoiding too messy condition, which is convenient for your shooting.. With this PowerTap Receptacle, you can expand any Power Tap to accommodate up to four separate D-tap. Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery.. At the D-tap end of cable equips with a strain relief which is a standard fixture for electrical cables that functions as a feature for relieving the stress from the cable connections themselves to prevent them from breaking.. Plug A D-tap Male Connector Plug B 4 Port D-tap Female Connector.. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please contact us if the cable you received is defective or doesnt work. We will solve the problems properly or send you a new replacement at once..

Compatibility SmallRig D-Tap to USB-C Power Cable 3266 is a power-supply accessory of MagicFIZ wireless follow focus system. It connects SmallRig Wireless Receiver Motor 3263 with V-Mount battery via the USB-C port and the D-Tap port, respectively.. Supports Fast Charging It supports fast charging and provides a stable output of 9V18W.. Short Circuit Protection NOTE Input voltage of over 18V triggers short circuit protection.. Related Products D-Tap to USB-C Power Cable 3266 and DC to USB-C Power Cable 3268 can connect the V-mount battery for powering SmallRig Wireless Receiver Motor 3263.. What You Get 1 x D-Tap to USB-C Power Cable..

ZGCINE LM-P4 Power Cable Special designedfor select RED, ARRI cameras. With overvoltage, overheating, and overcharge short-circuit protection, ensure peace of mind and longevity for your valuable devices. Offer continuous power supply for video recording or live broadcast. Lemo Plug 90 right-angled 2-pin connector, offering a blend of precision for seamless connectivity.. D-Tap Plug design with 4 ports of D-Tap female connections, enhancing versatility for your power needs.

Protective Dtap to 2.15.5mm DC 12v Right Angle Cable. Source power from Gold Mount batteries, Gold Mount Plates, V Mount batteries and from cameras with on-board d-tap output.. LCD interface cable for AF100, GH1GH2. Uonecn Safe Tap to 5.5x2.1mm DC Right Angle Plug. Provides power for Atomos Shogun, Ikan Monitor, Blackmagic Video Assist, SmallHD Indie 7 Monitor, KiPRO LCD Monitor, Lectrosonic, Lowel Blender LED, PowerTap-Lectro and other devices.. Uonecn Dtap Protective DTap It can prevent your device from short circuits caused by reverse insertion or using an incompatible cable, which will avoid damaging your device.Built-in microprocessor electronic control can identify automatically whether the plug inserts positively. When D-tap is inserted correctly, green light is always on, which means power on. When reverse insertion, power will be cut and the red light will flicker. Center positive polarity. Cord OD is 5.5mm with 0.5 square mm Copper wire.. The Max length of cable is about 1m about 39'' ,the Unstretched length is about 50cm 19''.. Please Note there is no regulator in the cable, so the input is same like the output, please make sure your battery power output same like your device power input..

Compatible with Industry Gear Compatible with V-MountGold-Mount batteries, ARRI, RED, TILTA, Steadicam, IDX, Teradek, SmallHD, and other pro camera accessories.. Built-In Power Indicator Light Easily verify live power connections and protect your gear by ensuring correct polarity before plugging in sensitive equipment.. Dual D-Tap Output Splitter Convert a single D-Tap power source into two D-Tap female outputs to power multiple devices simultaneously on set.. Screw Mount for Rigs Integrated mounting screw allows secure attachment to camera cages, rigs, or gimbals for organized and stable setups.. Flexible 59 150cm Cable with Strain Relief Long, durable cable with reinforced ends minimizes stress and ensures a longer lifespan, even with frequent movement..

This 4pin xlr to dtap power cable for Sony Venice Venice 2 F55 SXS Camera, for Canon C400, Blackmagic URSA Mini Pro, for Panasonic Varicam, Practilite 602 DSLR Camcorder, TVlogic LVM-170A monitor, SmallHD 1303 monitor from V-mount Gold-mount battery or other power sourse with D-tap output.. Ultra Soft Durable Cable made from New Liquid Silicone material, cable feels soft to the touch, flexible and not easy to knot. Being able to withstand more than 25000 bending tests and strains, greatly improves its service life. Just wipe it gently with an alcohol pad, to keep it clean as new.. It can also be used to convert a D-Tap output into an XLR 4-pin output for power. Please note 4-Pin XLR Only. Not for LED Lights with XLR 3 Pin port.. Plug A XLR 4 Pin Female Plug B D-tap Male. Cable Length 39 inches 1 meter. We can customize cables with other length, if you need custom cables, please send a message to us before placing the order.. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. Please let us know if the cable you received is defective or doesnt work. We will solve the problems properly or send you a new replacement at once..

Secure Locking D-Tap Power Solution - Designed for Atomos Ninja V, SmallHD monitors, and Hollyland systems.Features a secure locking mechanism to help prevent accidental disconnections during use.A practical 50cm professional length.. Durable Construction - Engineered with oxygen-free copper conductors and durable PVC insulation to help maintain power transfer and durability in various production environments.. Monitor Compatibility - Suitable power solution for Atomos recorders, SmallHD touch monitors, Hollyland wireless systems, and many professional video monitoring equipment using DC power input.. Length - Cable length offers a balance between reach and cable management in monitor and camera rig setups.. Dedicated Customer Support - If you have any questions about our products, you can contact us at any time and we will reply to you by email within 24 hours..

Power 4 Devices at Once Features 3 D-Tap female ports and a 5V2.1A USB output to power monitors, wireless receivers, cameras, or mobile accessories from a single D-Tap source.. Compatible with Pro Gear Suitable for V-MountGold Mount batteries, ARRI, RED, Teradek, TILTA, IDX, SmallRig, SmallHD, and other D-Tap-equipped video equipment.. Built-In Indicator Light Helps ensure safe and accurate power delivery. Check for the light before plugging in sensitive equipment to protect against misconnection.. Screw Mount for Camera Rigs Easily attach the splitter to rigs, cages, or gimbals with the included 14 mounting screw for a clean, secure setup.. Flexible Durable Design Equipped with strain-relief protection and a 47 inch 120cm cable length to minimize wear and provide flexibility on set..

100W USB-C PD Power Delivery Charge high-demand devices like laptops cameras rapidly with 5V20V output, compatible with PD 3.0 standards for fast, stable energy transfer. 10-Port Multi-Interface Flexibility Power up to 10 devices simultaneously via 2x Lemo 2Pin 14.8V10A, 4x D-Tap 14.8V10A, 1x BP 14.8V10A, and USB-C PD ports, ideal for cameras, monitors, and film rigs. Hot-Swap Dual V-Mount Design Seamlessly switch between batteries without power interruption dual micro V-mounts enhance stability for handheldsteadicam setups and extend runtime. Professional-Grade Build Control Features one-touch power management, LED power status indicators, and a 15mm rod clamp for secure mounting on cinema rigs or tripods. Compact Travel-Ready Lightweight 1.15LB with a 4.8x4.8x3.2IN footprint, includes mounting base and USB-C E-mark cable for on-location efficiency.

Wide Compatibility Designed to work with D-Tap outputs from Anton Bauer, V-Mount, ARRI, RED cameras, TILTA rigs, Steadicam systems, IDX batteries, and more. Ideal for filmmakers, videographers, and photographers.. Expand Your Power Options Easily convert one D-Tap male into two D-Tap female ports, allowing you to power multiple accessories like wireless receivers, camera monitors, and other D-Tap compatible devices.. Built-In Safety Indicator LightEquipped with an indicator light to show power status at a glance. Please check that the light is on before connecting devices to ensure safe usage and prevent USB port damage due to incorrect polarity.. Robust Reliable DesignPlug A D-Tap Male Connector Plug B 2 Port D-Tap Female Connector with Type C Connector. Reinforced strain relief at each end helps minimize cable stress and extend lifespan for rugged field use.. Professional Grade SpecsInput Voltage 14.8V Max Working Current 10A Cable Length 59 inches 150cm Coiled design provides flexibility and a clean, tangle-free setup..

Perfect length, both practical and not too short. Expand 1 Dtap female into 4, it is a perfect solution for someone who wants to add multiple Dtaps to their camera rig.. Compatible for BMPCC 4K 6K , Tilta Nucleus Nano, SmallHD Monitor, Z-cam, 7 monitor and Ninja V.. Power source can be Gold Mount batteries, V Mount batteries, Gold Mount Plates with D-tap output. The D-tap end of the cable is equipped with a strain relief device.. Plug A D-tap Male Connector Plug B 4 Port D-tap Female Connector.. Total length 6.7 inch 17cm. Max work current 10 amp. If you need to customize other lengths, please contact us before placing an order..

This cable is Connect to RED DSMC2 Jetpack AUX power output or connect to RTmotion Sidekick About the detail,please contact me. Cable Length60cm about 24inches in stock. We can customize cables with other length, please send a message to us if you need.. Plug A Straight 2 Pin Male.. Plug B 4 Port D-Tap Female.. Every cable was tested to ensure that there are no short circuit, no potential breakdown problems before shipping. If the cable you received is defective, please contact us..

XLR D-tap power splitter, male 4 pin XLR connector to 3-port d-tap ptap female outlet hub. Power splitter box for block battery, camera or power system XLR 12V-24V output. Model 10A max at 12V, with no fuse or regulation, 14'' screw and holes for universal mounting, another M4 screw and holes for Ronin 2. Use this splitter adaptor, you can power up 3 of mixer, recorder, monitor, wireless system, motor, receiver, light and more accessories. Box Dimensions 70mm25mm18.5mm, aluminum shell. Net weight 110g. Length about 30cm12inch long.

D-Tap to 5.5 x 2.5mm DC Barrel. Coiled Cable, 16 to 32 in Length. Right-Angle Connectors on Both Ends. For Powering Monitor, Light, Accessory.

High-quality Design Our 2-pack D-TAP to DC angled power cables are carefully crafted with a lockable DC head and a 5525 connector, ensuring a secure and stable connection for your monitoring devices. Versatile Length With a non-stretched length of 35cm and an extended length of approximately 80cm, our cables provide flexibility and convenience in various applications. Whether you need to power up your wireless video transmitter or monitor, these cables have got you covered. Secure Locking Mechanism The lockable feature of the DC head guarantees that the cable stays firmly connected, eliminating any worries about accidental disconnections during operation. This ensures uninterrupted power supply and seamless monitoring experience. Wide Compatibility Designed specifically for monitoring devices, these power cables are compatible with various models, including the popular B-type converter, Lockable DC, General flame, High vision T80, Mammoth 400S, and Wireless Video Transmitter. They are a must-have accessory for any professional or amateur videographer. Easy to store When not in use, the power cord can be easily stored. For example, some power cords are bendable or foldable, which makes it easy for users to organize them into a smaller size for easy carrying and storage, especially for users who need to go out for shooting frequently.

15mm rod clamp at the end of the cheeseplate. Power converts from D-tap male to 4-port female. A combination of a cheeseplate and a power convert outlet. Max work current 10A in total, coiled spring cable can be stretched to max 80cm. Works great for external monitoron-camera lightwireless receiver Compatible with Gold V-mount camera battery.

Connectors 1X Male 2-Pin D-Tap 1x Female Regulated 12V D-Tap Socket 3x Female 14.8V D-Tap Sockets. Cable Length 16. 1x 12V Regulated Port 3x 14.8V Ports. Machined From Aerospace Grade Aluminum. KONDOR BLUE LIFETIME WARRANTY.

MULTIPROTECT SAFETY SYSTEMA built-in power conditioner protects electrostatic discharge ESD to ensure the safety of you and the device. Industrial-grade Surge protection.?An industry-standard P-Tap connector so the plug will not fall out easily and it doesn't plug to be very tight or force to plug them in. The Pro P-Tap splitter accepts DC input power from 10.0 V DC to 17.5 V DC.. 12V AUX OUT12 V Aux out with Thermal, and Short Protection is limited to 12 V and can supply a device with a current of up to 2.2 A depending on the power supply.. QUALITY CABLEJapan SEIWC Electric Wire. Fire retardant, high-temperature resistant Kevlar braided cable.The cable is resistant to high temperature and folding. When under load, wire losses are minimized.. MOUNTING OPTIONSA sturdy way to mount. With four 14-20 screw threads, you can mount the P tap hub on the camera or the camera cage.. RELIABLE WARRANTYSurge voltage will cause unpredictable failures of the equipment. For safe and stable shooting, please use a power supply product with surge protection. At LANZYKU, we believe in our products. That's why we back them all with an 18-month warranty and provide friendly, easy-to-reach support. Know that your investment will be worth it..

MULTIPROTECT SAFETY SYSTEMA built-in power conditioner protects electrostatic discharge ESD to ensure the safety of you and the device. Industrial-grade Surge protection. An industry-standard P-Tap connector so the plug will not fall out easily and it doesn't plug to be very tight or force to plug them in. The Pro P-Tap splitter accepts DC input power from 12.5 V DC to 17.0 V DC.. 12V AUX OUT12 V Aux out with Thermal, and Short Protection is limited to 12 V and can supply a device with a current of up to 2.5 A Max 3Ampsdepending on the power supply.. QUALITY CABLEJapan Electric Wire. Fire retardant, high-temperature resistant Kevlar braided cable.The cable is resistant to high temperature and folding. When under load, wire losses are minimized.. MOUNTING OPTIONSA sturdy way to mount. With four 14-20 screw threads, you can mount the P tap hub on the camera or the camera cage.. RELIABLE WARRANTYSurge voltage will cause unpredictable failures of the equipment. For safe and stable shooting, please use a power supply product with surge protection. At LANZYKU, we believe in our products. We provide friendly, easy-to-reach support. Know that your investment will be worth it..

For Atomos Monitor. Compatible with Universal Battery Plate. D-Tap to 2.5mm Right-Angle DC Connector.

D-tap Power Splitter distribution hub 1224V for ARRI Alexa, RED DSMC2 camera v-mount battery to SmallHD monitor, teradek bolt bond, vaxis wireless transmitter receiver. 1 d-tap plug converts to 3 compatible for Lemo 0B 2pin power splitter cable adapter distributor.. Cable length about 20cm, we can customize. Model 10A max at 12V, with no fuse or regulation, 14-20 screw holes for mounting sliding set screw, with 2 x screws. Box Dimensions 47mm x 18.2mm x 20mm.

POWER SUPPLY DISPLAY0.49-inch Smart OLED. Only display voltage with no load Voltage and Amps displayed under load. It is more convenient and accurate for you to know the current and each item's energy pull during shooting.. MULTIPROTECT SAFETY SYSTEM An industry-standard P-Tap connector. Japan Kawakita Electric Wire. Industrial-grade Hot Swap Controller. The Pro P-Tap splitter accepts DC input power from 11.5 V DC to 17.0 V DC. A built-in power conditioner protects against reverse-polarity connections, electrostatic discharge ESD, overvoltage, overcurrent, short circuit, and hot-swap functions to ensure the safety of you and the device.. MOUNTING OPTIONSA sturdy way to mount. With one M4 and two 14-20 screw threads, you can mount the P tap hub on the camera or the camera cage.. OPTIMAL CABLEThe cable is resistant to high temperature and folding. When under load, wire losses are minimized. Also we can customize it in various lengths for free.. RELIABLE WARRANTYSurge voltage will cause unpredictable failures of the equipment. For safe and stable shooting, please use a power supply product with surge protection. At LANZYKU, we believe in our products. That's why we back them all with an 18-month warranty and provide friendly, easy-to-reach support. Know that your investment will be worth it..

pD-Tap male connector to 4-port female connector. There are four D-Tap female connectors, which is very suitable for providing power to multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery. pSafe to Use standard specifications Safety is guaranteed. With CE, FCC, RoHS certification marks. pMultifunction In addition to the D-Tap female port, there is also a 5V2.1A USB jack and two 8V and 12V 5521 DC port to meet more charging needs. pSmall and Lightweight It is small in size, lightweight and easy to carry. There are two 14 inch screw holes on the back, which can be installed and fixed on the photographic equipment. pConvenient Switch With a switch button, you can directly turn it on or off without plugging and unplugging the connector, and there is an indicator light, which shows green when working.

Triple P-TAP Breakout BoxD-tap to 3ports D-tap P-tap Splitter .. With 14 screw thread,and Ronin 2 screw thread for versatility connect options.Makes you a comfortable use and more stable when you need to fix it on the device.. P-TAP Breakout Box Size 70mm25mm18.4mmShell metal Cable Length 50cm.. With this PowerTap Receptacle,you can expand any Power Tap to accommodate up to three separate,Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery.. The Triple P-TAP Breakout Box creates three P-Tap ports by connecting the Triple P-TAP Breakout Box to the D-TAP port on the Power Hub..

Ultrashort 4-Port D-tap Adapter Splitter Cable. Max work current 10 amp max total.. With this PowerTap Receptacle,you can expand any Power Tap to accommodate up to four separate,Perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery..

14 D-ring screw included, easily attach to your camera rigs or device.. Splits one male D-Tap port into four female D-Tap ports. Power multiple accessories from a single D-Tap battery. The splitter supports a maximum current output of 10A, For best operation, ensure that the accessories you are powering don't exceed the maximum current output of the power source.. ZITAY D-Tap connector has special design of anti-reverse indicator, red light blinks means wrongly plugged in, power supply will cut off automatically green light always on means correct connection..