Anti Corrosion Folding dock cleats and all screws are made of 316 stainless steel, which has stronger rust prevention and wear resistance and is not easily corroded by salt water.. Folding Design The boat deck cleats can be flipped up and down, easily ejected when needed, and completely folded flat when not in use, eliminating the risk of tripping or injury.. Polished Surface Our dock tie down cleats adopt polishing process, with a smooth surface and good flatness. Smooth edges will not wear any ropes or dock lines easily.. Total Length 6. Total Width 2.1. Elevated Height 1.75. Folded Height 0.53. Bolt Hole Spacing 3.4center to center. Suitable for yachts, kayaks, skis, and decks, ect.. Hardware The package also includes not only four backing plates to reinforce the cleats and prevent them from falling off, but two types of bolts and screws, which do not need to be purchased separately..

These Flip Up cleats are made of marine grade 316 stainless steel materials, corrosion resistant in saltwater environment, not easy to rust, and hence, expect it to last longer. High polished surface for mirror-like appearance to match marine uses watercraftboatyacht, boat docks, decks, piers for tying up boats, kayaks, jet ski's and so on. Also perfect for home decoration and outdoor application such as beach, garden, pool, and coastal decorations or use the cleat hook as cabinet pulls or towel hooks or on tarps, campers, trailers, or any other general purpose rope tie down applications. Comes with 4 pcs heavy duty folding boat cleats, which have enough space for securely tying common knots such as cleat hitches, clove hitches, bowline knots, and anchor bends. You can mount to the surface of the deck or gunwale of a boat,suitale for limited mounting spaces. these dock cleats folding are designed to blend in seamlessly with the look of your boat or dock. If you have any questions about the cleats for boat docks, please feel free to contact us, we will provide you with a satisfactory answer.

Dock Heavy Duty Hardware Dock connector hinge kit comes with male female hardware brackets and dock hinge pin Constructed from marine grade hardware steel and welded onto a heavy duty 5 x 3-12 backer plate, featuring solid, durable and rustproof to fit for the freshwater and marine environments Floating dock connector hinge kit is aiming to provide the long useful service for your floating docks. Build Floating Docks Floating dock heavy hardware dock hinge kit attach the ramp to floating dock, provide a smooth deck surface while allowing the dock to hinge up and down.. Compatibility The floating dock heavy hardware brackets mounting holes is 716. Universal hole placement fits 2 x 8 over lumber. Dock ramp hinge holes fit for 38 carriage bolts not included.. Easy to Use Lay both pieces flat and match. Mark drill out the center of the holes and Install the floating dock hinge on the wood dock. There are enough distance between the floating dock hinge brackets to make them easy to connect with the main pin and locking pin. Quick easy to install and detach.. Other Dock Heavy Hardware for Building Floating Docks The stationary dock side leg pipe holder bolts to the side of the wood floating dock frames to stabilize your pier ASIN B0D47V2P9M. The Dock Outside Corner leg pipe holder fit the corner of the floating docks to stabilize your pier ASIN B0D47TS6FS. If you need these dock heavy duty hardware, please search the ASIN on the amazon..

Stationary Dock Heavy Duty Side Leg Pipe Holder Dock brackets hardware constructed from marine grade hardware steel for dock posts and poles Welded onto a heavy duty 5 x 5 backer plate, featuring solid, durable and rustproof in the freshwater and marine environments Stationary dock heavy duty side leg pipe holder is aiming to provide the long useful service for your floating docks. Build Floating Docks Stationary dock heavy duty side leg pipe holder bolts to the side of the wood floating dock frames to support dock posts poles, allowing the floating dock to smoothly slide up and down with the water levels and stabilize the dock on the lake. Compatibility Inner diameter of the floating dock pipe holder is 2.1 and fit round dock posts poles Accommodating various pipe sizes by side of dock brackets hardware set screws The floating dock barckets hardware mounting holes is 716fitting for 38 carriage bolts carriage bolts are not included. Easy to Use Pre-punched bolt patterns allows dock pipe barckets to easily install directly to the side of dock frame Installed the dock side leg pipe holder in the wooden floating docks with four carriage bolts not included Loosen and tighten the set bolts with shoulder nut to adjust the height of the dock, allowing the dock float. Warm Tips The industry standard calls the floating dock pipe size as 1.5 schedule 40 but the O.D. is actually 1 78 Please check the size of dock leg pipe before purchasing dock pipe barckets. Other Hardware for Floating Dock Building The Dock Outside Corner leg pipe holder fit the corner of the floating docks to stabilize your pier ASIN B0D47TS6FS Dock Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections ASIN B0D47VHP8J Dock foot plate provide stable support and prevent sinking down in the mud for docks and securely hold the dock leg pipe post pole foot ASIN B0F38NXVB5If you need these hardware for dock building, please search the ASIN on the amazon.

Premium MaterialsCrafted from galvanized metal with expert welding at connections, this marine hardware is rugged and durable, capable of supporting even under heavy pressure.. Fixed Semi-Floating Base PlateSecure your wooden or aluminum with an 5-inch x 5-inch square hardware base plate. The larger contact area prevents sinking and keeps the level.. Easy Installation The base plate is mounted on the ground and river bottom with sand, mud and rock Make the foot through the base plate to the bottom and then tightening the set screws to firmly fix the support leg.. Versatile BaseBeyond supporting marine with muddy bottoms, this fixed base hardware is ideal for patio table bases, outdoor umbrella stands, or construction scaffolding. Its adjustable bolts fit various posts.. Durable Sturdy Built to be tough and waterproof, the base plate is designed for years of use in water, promising long-lasting performance..

Dock Heavy Duty Hardware Constructed from marine grade hardware steel and welded onto a heavy duty backer plate, featuring solid, durable and rustproof to fit for the freshwater and marine environments. Stationary dock heavy duty corner leg pipe holder is aiming to provide the long useful service for your floating docks.. Build Floating Docks Stationary dock heavy duty side leg pipe holder bolts to the corner of the wood floating dock frames to support a dock pipe leg, allowing the floating dock to smoothly slide up and down with the water levels and stabilize the dock on the lake.. Compatibility The inner diameter of the stationary dock pipe holder is 2.1and fit for round dock side leg pipe. Accommodating various pipe sizes by side bracket set screws. The dock pipe brackets mounting holes is 716fitting for 38 carriage bolts carriage bolts are not included.. Easy to Use Pre-punched bolt patterns allows to easily install directly to the side of dock frame. Installed the dock side leg pipe holder in the wooden floating docks with four carriage bolts not included. Loosen and tighten the set bolts with shoulder nut to adjust the height of the dock, allowing the dock float.. Warm Tips The industry standard calls the floating dock pipe size as 1.5 schedule 40 but the O.D. is actually 1 78. Please check the size of dock leg pipe before purchasing.. Other Dock Heavy Hardware for Building Floating Docks The stationary dock side leg pipe holder bolts to the side of the wood floating dock frames to stabilize your pier ASIN B0D47V2P9M. Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections ASIN B0D47VHP8J. If you need these dock heavy duty hardware, please search the ASIN on the amazon..

PREVENTING SINKING Dock hardware is designed for fixing wooden or aluminium boat docks, the bottom 4.7 metal base plate can effectively disperse the pressure and increase its stability, which is a great solution to dock posts sinking into the muck.. HIGH QUALITY MATERIALS Boat dock hardware is made of hard metal material, and excellent welding technology is used at the interface to make it more sturdy, even under great pressure, it will not easily deform and support your dock well.. LONG SERVICE LIFE Floating dock hardware surface uses a special spraying process, which has excellent rust and corrosion resistance, and will not be greatly damaged even in harsh environments such as seawater and sludge for a long time.. EASY AND FAST INSTALLATION Stationary dock hardware can easily fix dock columns with a diameter of no more than 2 inches, simply threading the column through dock hardware and then tightening the bolts to firmly fix it on the riverbed.. MULTI- PURPOSE BASE Stationary dock base plate hardware is not only suitable for supporting boat dock at the bottom of silt, but also very perfect for patio tables and outdoor umbrella bases to ensure greater stability and safety..

PREVENTING SINKING Dock hardware is designed for fixing dock posts, the bottom 4.7 metal base plate can effectively disperse the pressure and increase its stability, which is a effective solution to dock posts sinking into the muck.. HIGH QUALITY MATERIALS made of high- strength metal, with excellent welding technology used at the joints, making it more robust and resistant to deformation even under extreme pressure, providing excellent support for your dock.. RUST PROOF COATING The surface is treated with a special coating process, providing excellent rust and corrosion resistance. Even when exposed to harsh conditions for a long time, it will not be damaged and does not require frequent replacement.. SIMPLE INSTALLATION Dock foot plate can be easily fixed to dock posts with a diameter of no more than 2 by tightening the bolts. Its bottom has four 0.4 square holes that can be reinforced with carriage bolts for added stability.. MULTI- PURPOSE BASE Stationary dock base plate hardware is not only suitable for supporting boat dock at the bottom of silt, but also very perfect for patio tables and outdoor umbrella bases to ensure greater stability and safety..

Dock Corner ConnectorL right angle dock connector hinge kit comes with male female hardware brackets and dock hinge pin, with 0.4 inch mounting holes for quick and smooth assembly.. Heavy StructureEasily connected two parts of the pontoon wharf together, can withstand heavy loads without deformation, its solid structure contributes to the stability of the two docks, is a reliable tool to maintain the balance of the wharf and the efficiency of operation.. QualityThe 4mm thickened cast iron is robust and provides a great load capacity, withstands well even under severe vibration, provides strong support for the structure, and provides optimal stability and life.. Anti-rust CoatingThe smooth and thickened white anti-rust coating, which resists rust and corrosion, is suitable for both indoor and outdoor applications even in areas exposed to harsh weather conditions, making it ideal for corner reinforcement tasks.. Widely UsedWide range of general and industrial applications, making them ideal for home renovations and floating dock construction.They provide strong structural support under severe vibration..

Secure and Reliable Dock Brackets Hardware The U shape design with 4 mounting holes ensure a secure mounting to the vertical stabilizer dock pipes The 2 bolts on the side leg pipe holder hold the dock post in place to stabilize your pier the dock pole brackets can be mounted inside or outside of the dock frame. Measurement of Dock Pipe Brackets The size of bracket HOLE is 2.12 x 2, fits 2 ID round dock posts poles The size of backer plate is 5 x 5 The thickness of U shape bracket is 0.425 and the thickness of backer plate is 0.57 The floating dock barckets hardware mounting holes is 716 fitting for 38 carriage bolts carriage bolts included. Heavy Duty Stationary Dock Side Leg Pipe Holder The dock brackets hardware is constructed from sturdy iron with rust proof baking finish, adequate thickness provides exceptional strength, ensuring long-term support for floating dock or stationary dock. Easy to Install and Remove Different from round tube shape post bracket, the U shape allows flexibly install or remove the dock pole, you can install or change the dock bracket without remove the dock pole or forcefully destroying the old bracket Comes with 2 bolts and pre-drilled thread on the front of the dock pole holder allowing easy adjust the tightness of dock pipe leg. Package Include 2 x dock post bracket with 4 bolts, 2 x backer plate, 8 x carriage bolts kit.

Marine Grade SteelConstructed from 11-gauge marine grade steel with hot-dip galvanizing. These galvanized mud pads for docks offer good rust resistance in freshwater, saltwater, or coastal environments. Dock Base Plate a reliable foundation for your dock. Requires almost no maintenance.. Dual Set ScrewsTwo heavy-duty set screws lock most standard round dock posts firmly in place. The 2-18 inner diameter holder fits dock poles and brackets, helps reduce wobbling, and allows easy adjustment.. Mounts on Different BottomsWorks on sand, mud, gravel, or rock. This ground-mounted footing gives your dock hardware a solid base simply place it on the bottom, insert the leg, and tighten the screws. No concrete needed. Resists frost heave and tidal movement.. Wide BaseThis dock post foot plate features an 8x8 base that helps keep dock legs from sinking into soft mud or sand. This helps prevent shifting and tilting your floating dock stays more level and stable, even under waves, boat impacts, and heavy use.. Reinforced WeldingWelded at all joints for added strength. This dock posts and hardware kit provides reliable support for wooden, aluminum, or steel frame docks. Including dock pads for extra stability. Install it and forget it it works well year after year.. TipsMost standard floating dock pipes are labeled 1.5-inch Schedule 40, but actual outer diameter is about 1.9 inches 1-78. Our 2-18 ID holder is designed for this size. Please measure your dock post before purchasing..

Stationary Dock Heavy Duty Side Leg Pipe Holder Dock brackets hardware constructed from sturdy iron with rust proof baking finish for dock posts and poles Welded onto a heavy duty 5 x 5 backer plate, featuring solid, durable and rustproof in the freshwater and marine environments Stationary dock heavy duty side leg pipe holder is aiming to provide the long useful service for your floating docks. Build Floating DocksStationary dock heavy duty side leg pipe holder bolts to the side of the wood floating dock frames to support a dock pipe leg, allowing the floating dock to smoothly slide up and down with the water levels and stabilize the dock on the lake.. Compatibility The inner diameter of the floating dock pipe holder is 2.1 and fit round dock side leg pipe. Accommodating various pipe sizes by side bracket set screws. The floating dock heavy hardware mounting holes is 716fitting for 38 carriage bolts carriage bolts are not included.. Easy to Use Pre-punched bolt patterns allows to easily install directly to the side of dock frame. Installed the dock side leg pipe holder in the wooden floating docks with four carriage bolts not included. Loosen and tighten the set bolts with shoulder nut to adjust the height of the dock, allowing the dock float.. Warm Tips The industry standard calls the floating dock pipe size as 1.5 schedule 40 but the O.D. is actually 1 78. Please check the size of dock leg pipe before purchasing.. Other Dock Heavy Hardware for Building Floating Docks The Dock Outside Corner leg pipe holder fit the corner of the floating docks to stabilize your pier ASIN B0D47TS6FS. Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections ASIN B0D47VHP8J. If you need these dock heavy duty hardware, please search the ASIN on the amazon..

Stationary Dock Heavy Duty Side Leg Pipe Holder Dock brackets hardware constructed from sturdy iron with rust proof baking finish for dock posts and poles Welded onto a heavy duty 5 x 5 backer plate, featuring solid, durable and rustproof in the freshwater and marine environments Stationary dock heavy duty side leg pipe holder is aiming to provide the long useful service for your floating docks. Build Floating Docks Stationary dock heavy duty side leg pipe holder bolts to the side of the wood floating dock frames to support dock posts poles, allowing the floating dock to smoothly slide up and down with the water levels and stabilize the dock on the lake. Compatibility Inner diameter of the floating dock pipe holder is 2.1 and fit round dock posts poles Accommodating various pipe sizes by side of dock brackets hardware set screws The floating dock barckets hardware mounting holes is 716fitting for 38 carriage bolts carriage bolts are not included. Easy to Use Pre-punched bolt patterns allows dock pipe barckets to easily install directly to the side of dock frame Installed the dock side leg pipe holder in the wooden floating docks with four carriage bolts not included Loosen and tighten the set bolts with shoulder nut to adjust the height of the dock, allowing the dock float. Warm Tips The industry standard calls the floating dock pipe size as 1.5 schedule 40 but the O.D. is actually 1 78 Please check the size of dock leg pipe before purchasing dock pipe barckets. Other Hardware for Floating Dock Building The Dock Outside Corner leg pipe holder fit the corner of the floating docks to stabilize your pier ASIN B0D47TS6FS Dock Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections ASIN B0D47VHP8J If you need these hardware for dock building, please search the ASIN on the amazon.

No inflating Required This innovative dock wheels unlike traditional inflatable dock wheel, as it does not require any inflation. Made from a durable material that outlasts traditional dock bumpers, it eliminates the hassle of inflating and the risk of leaks, allowing for extended use.. Soft Durable Material Made of high-density EVA material, this dock guard boasts exceptional impact resistance, corrosion resistance, and fade resistance capabilities, providing your boat with comprehensive protection. With this bumper installed, you can safely and securely dock your boat without any worries.. Freely Spin Dock wheels enhance mooring accuracy by offering rolling contact points that guide vessels, reducing manual effort and improving navigation for operators. They serve as a critical protective buffer, shielding ships and docks from structural damage such as indentations and abrasions.. Straight Corner Mounted The boat dock corner wheel features a removable base that allows for 270-degree rotation, providing two distinct mounting options one for installation along the edge of the dock and another for installation at the corner of the dock. This innovative design provides you with flexibility and convenience in choosing the optimal installation location for your dock bumper.. Diameter 12in KEMIMOTO dock corner bumper size 5.7in high 12.6in dia. Intended for use with boats 20-40 feet long,such cruiser,pontoon,jon boat,bass, we suggest you use two on one side of the dock..

Heavy Duty Side Leg Pipe HolderMade of 14 inch thick hot-dip galvanized steel plate, fixed on the side of the wooden floating dock frame, so that the floating dock smoothly slides up and down with the water level, so that the dock is stable on the lake to avoid lateral deviation or shaking.. CompatibilityThe floating dock pipe support has a 2-inch inner diameter and 2 external screws for easy adjustment of tightness. It is suitable for most round dock side legs. It effectively stabilizes the fence post on the floating dock.. Durable MaterialThe dock hardware is of exceptional welding quality with superior strength and durability, coated with a black zinc layer, and has proven rust, weather and corrosion resistance, especially in freshwater Marine environments.. Easy to InstallEach dock edge has a pre-drilled hole with five 0.4 squares, and these brackets allow for quick and hassle-free installation on wood surfaces. Enhanced anchoring size and coverage.. Widely UsedIt is widely used in commercial docks, private yacht docks, fishing port docks, tourist attractions docks, etc., to provide additional support for the pontoon bridge to ensure the structural integrity and stability of the dock..

Our Came With All The Hardware You Need To Mount And Use Each set comprises 1 u-shaped bracket, 1 mounting backer plate, 2 adjustment bolts and 4 carriage bolt kits, meeting the requirements for jetty construction, reinforcement and maintenance.. They Are Mounted Using U-Brackets For A Secure Fit Supports installation on both inner and outer sides of the dock framework. The U-shaped design securely locks woodencomposite dock frames to dock support pile tubes, ensuring the entire dock structure remains stable and immovable.. Offer A Dependable Solution For Stabilizing Dock Posts Equipped with adjustable bolts, there is no need to dismantle the dock columns or damage the old supports. The dock height can be freely adjusted, adapting to changes in dock water levels during different seasons and tides.. Nice Thick Steel And Decent Welds Made of galvanised steel, the product offers waterproofing, rust resistance and UV protection, withstanding corrosion from seawater and other harsh, humid environments. It provides reliable long-term support for jetties, ensuring secure outdoor use.. Allowing For Easy Placement Or Removal Of Dock Poles Without Dismantling The Entire Structure Perfectly compatible with dock legs not exceeding 2-532 in diameter. Pre-drilled threads and included bolts make it easy to adjust tightness as needed, greatly reducing installation time..

Heavy-Duty Dock Hardware Constructed from high-grade, corrosion-resistant steel, our dock base plate is built to withstand harsh marine environments. The thickened structure provides a solid foundation for your stationary or floating boat docks, ensuring long-lasting stability and reliable performance for seasons to come.. Universal Post Pole Support Designed for ultimate versatility, this dock pipe holder fits various standard aluminum and steel pipes. Whether you are installing a new boat dock or reinforcing an existing post holder, our mounting bracket offers a secure, wobble-free fit for your vertical supports.. Engineered for Maximum Stability Our dock plate features a wide-base design that distributes weight evenly, preventing dock poles from shifting or sinking. The professional-grade hardware ensures your mounting bracket stays firmly attached to the dock leg, providing a safe and secure platform for your watercraft.. Quick Easy Installation Simplify your dock hardware setup with our user-friendly base plate design. The pre-drilled holes allow for fast mounting to wood, composite, or metal docks. Perfect for DIYers and pros alike, this bracket helps you complete your dock support project in record time.. All-Weather Marine Protection Finished with a heavy-duty protective coating, this dock hardware set is highly resistant to rust and salt-water damage. From floating dock brackets to stationary post supports, our components are the dependable choice for lakes, rivers, and coastal applications..

The size of the connector hinge backer plate is 4 x 4, with a hole diameter of 34.. Heavy duty hinge, thick metal, quality welds, well galvanized.. Dock accessories is excellent for attaching your ramp to your floating dock.. Dock hardware brackets have enough distance between the flanges to make them easy to connect with the main pin and locking pin.. Installed easily and easy to detach, Replacing pins was easy..

STABILITY GUARANTEED - Floating dock male corner hinge is made of hot-dipped galvanized Q235 steel hardware, the same as the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Boat dock male corner hinge enhances durability with an even coat that prevents the paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - Floating dock male corner hinge have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - Galvanized dock male corner hinge each Q235 steel plate measure 10.25x5x10.25, and 6mm thick 21mm male corner inner diameter, and19mm thick. Holes are pre-drilled on all 4 corners of the metal plate, each hole measuring 12 in diameter - NOT Include Carriage Bolts.. DIY YOURSELF - Easily installed and detached. Our heavy-duty dock construction hardware is perfect for DIY projects, ensuring excellent attachment of your ramp to your floating dock. If you have any questions, you can contact us via Amazon email, we will reply within 24 hours..

STABILITY GUARANTEED - Floating dock outside corner is made of hot-dipped galvanized Q235 steel hardware, the same as the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Boat dock outside corner enhances durability with an even coat that prevents the paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - Floating dock L right angle bracket have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - Galvanized dock outside corner each Q235 steel plate measure 10.25x5x10.25, and 6mm thick. Holes are pre-drilled on all 4 corners of the metal plate, each hole measuring 12 in diameter - NOT Include Carriage Bolts.. DIY YOURSELF - Easily installed and detached. We recommend using the D2-Washer Plate B0D542C59J and D4-Backer Plate B0D53XN7J5 to effectively secure the outside corner plate to the dock. 24-hour response to Amazon email inquiries..

STABILITY GUARANTEED - Floating dock inside corner is made of hot-dipped galvanized Q235 steel hardware, the same as the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Boat dock inside corner enhances durability with an even coat that prevents the paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - Floating dock L right angle bracket have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - Galvanized dock inside corner each Q235 steel plate measure 8.75x5x8.75, and 6mm thick. Holes are pre-drilled on all 4 corners of the metal plate. An ideal aid in heavy duty dock construction projects. - NOT Include Carriage Bolts.. DIY YOURSELF - Easily installed and detached. We recommend using the D2-Washer Plate B0D542C59J and D4-Backer Plate B0D53XN7J5 to effectively secure the inside corner plate to the dock. 24-hour response to Amazon email inquiries..

Heavy Duty Construction Made from marine grade steel and welded onto a 5 x 3-12 backer plate, designed for durability in freshwater and marine environments. Universal Compatibility Features 716 mounting holes that fit 38 carriage bolts and universal hole placement for 2 x 8 larger lumber. Complete Kit Includes male and female hardware brackets with dock hinge pin for secure connection between ramp and floating dock. Easy Installation Simple alignment and drilling process with adequate spacing between brackets for effortless pin connection and removal. Dimensions Bracket measures 5 in length and 3-12 in width, providing sturdy support for connecting dock sections.

Heavy-Duty Construction Made of thick hot-dip galvanized steel hardware for superior durability and rust resistance, suitable for both freshwater and marine environments. Universal Compatibility Features 716-inch installation holes for 38-inch carriage bolts, with 2-inch inner diameter pipe rack designed to accommodate various pipe sizes. Include Each side leg pipe holder includes dual bolt clamps for adjustable pipe diameter fitting and secure fixation to flat surfaces. Package Contents Set of 4 stationary dock side leg pipe holders, weighing 13 pounds total, perfect for dock construction and maintenance. Easy Installation Simple mounting process using four carriage bolts per bracket, with adjustable height capability for optimal dock positioning.

Floating Dock Hinge KitsIncluding male and female hinges, diameter shaft pins and safety pins, connector hinge backplates with dimensions of 4 x 4, dock fittings are ideal for attaching ramps to floating docks.. Heavy Structure0.15 inch thick cast iron is strong and durable, can withstand well, even if they provide strong support for the structure under severe vibration, and provides the best stability and life.. Rust PreventionThe surface is thickened with white anti-rust coating, which can prevent the paint from peeling or falling off, suitable for freshwater and Marine environments.You can trust them to last in the water for years.. Easy to InstallWith 0.4 inch pre-drilled holes, it is possible to quickly and easily connect two different wood surfaces, dock hardware support flanges up to 3 inches apart in diameter, heavy-duty latches provide optimal stability and longevity.. ServiceIf you encounter any questions in the process of purchase and use, feel free to send email to contact us, we will reply in time and provide solutions..

This patented, strength rated, innovative dock coupler system works for wood or aluminium docks.. It allows you to easily connect dock sections using our simple hitch hinge system.. Self-contained - no lost pins.. Self-supporting - carries heavy loads so you don't have to.. Tighten from above with 34 socket - Self-aligning silent.

4 Pack - Locking pin to be used with male and female connector hardware. Made from heavy-duty 34 thick durable galvanized steel. Hot dipped to prevent rusting and suitable for docks in saltwater, fresh-water, coastal and icy conditions. For floating docks.

Male Female Set - Outside Corner Hinge Plate includes 16 sets of carriage bolts, lock nuts flat washers. Made from heavy-duty 14 thick durable hot-dipped galvanized steel. Zinc coated to prevent rusting and suitable for docks in saltwater, fresh-water, coastal and icy conditions. Each plate has 8 716 pre-drilled mounting holes for easy positioning and alignment. 38 tab for 34 pin search B0FFVZNNTD for our Dock Hinge Pin. Use with backer plates to prevent bolts from pulling out. For floating docks.

Made from heavy-duty 18 thick durable hot-dipped galvanized steel. Zinc coated to prevent rusting and suitable for docks in saltwater, fresh-water, coastal and icy conditions. Includes 4 inside corner plates 8 backer plates, 32 sets of carriage bolts, lock nuts flat washers. Measurements Inside corner plates 5-Inch x 5-34-Inch - Backer plates 5-Inch x 5-Inch. Each surface has 4 716 pre-drilled mounting holes for easy positioning and alignment. For floating and stationary docks.

Experience unmatched ability to last use with our Heavy Duty Dock, designed with a backplate measuring 5 15 and a 716 mounting hole.Constructed from heavy-duty metal, this dock hardware ensures reliable performance, making it an essential addition to your boat dock accessories for long-lasting use.. The robust construction of our dock edge hardware features exceptional welding quality and a premium galvanized finish. This guarantees a strong and weather-resistant connection, providing peace of mind when securing your floating dock and ensuring it stays intacteven in challenging conditions.. Our dock hardware is expertly engineered to provide reliable supportfor your floating dock kits. Designed with a support pipe inner diameterof 2 14, it effectively stabilizes fence posts on your floating dock ensuring that your dock edge remains secure and functional throughout the seasons.. Installation is a breeze with our Heavy Duty Dock, as it comes equipped with two screws that allow for easy adjustment of tightness.This versatility makes it suitable for most pole diameters, ensuring compatibility with a wide range of boat dock accessories while providinga solid and dependable fit.. Enjoy exceptional customer support and satisfaction when you choose our Heavy Duty Dock, We stand behind our product, offering hassle-freeafter-sale services and assistance to ensure that your floating dock hardware meets your expectations and enhances your boating experience..

Experience unmatched ability to last use with our Heavy Duty Dock, designed with a backplate measuring 5 15 and a 716 mounting hole.Constructed from heavy-duty metal, this dock hardware ensures reliable performance, making it an essential addition to your boat dock accessories for long-lasting use.. The robust construction of our dock edge hardware features exceptional welding quality and a premium galvanized finish. This guarantees a strong and weather-resistant connection, providing peace of mind when securing your floating dock and ensuring it stays intacteven in challenging conditions.. Our dock hardware is expertly engineered to provide reliable supportfor your floating dock kits. Designed with a support pipe inner diameterof 2 14, it effectively stabilizes fence posts on your floating dock ensuring that your dock edge remains secure and functional throughout the seasons.. Installation is a breeze with our Heavy Duty Dock, as it comes equipped with two screws that allow for easy adjustment of tightness.This versatility makes it suitable for most pole diameters, ensuring compatibility with a wide range of boat dock accessories while providinga solid and dependable fit.. Enjoy exceptional customer support and satisfaction when you choose our Heavy Duty Dock, We stand behind our product, offering hassle-freeafter-sale services and assistance to ensure that your floating dock hardware meets your expectations and enhances your boating experience..

Product Size floating dock hinge accurate 4 x 4 approximately 10.16 cm x 10.16 cm, providing a wide mounting contact surface Standard 34-inch approximately 1.91 cm through-hole, compatible with common dock master pin and lock pin sizes, ensuring a secure connection. Heavy Duty Structure the dock hinge body and bracket are made of thickened metal, with dense welds spread throughout key connection points, this durable design ensures structural integrity and long-term performance in harsh marine conditions. Widely Application the dock accessory is ideal for safe and smooth connections to floating docks, pontoons, docks and landing ramps Especially suitable for connection points that require ship docking, personnel movement, and water flow fluctuations, bringing dynamic loads. Design Advantages the floating dock hardware master pin and lock pin are easy to install provides plenty of operating space for installing the main connecting pin and fixing lock pin such as open pins, R-pin or bolts for easy operation even with gloves. Easy to Install and Disassemble the float dock hinge special structural design makes it extremely easy to replace worn pins without complex tools or disassembly of the entire hinge assembly, greatly reducing late maintenance costs and time.

STABILITY GUARANTEED - These floating dock pipe leg holders are made of hot-dipped galvanized Q235 steel hardware, the same as the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Boat dock side leg pipe sleeve enhances durability with an even coat that prevents the paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - Floating dock leg holders have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - These galvanized dock pipe leg holders each Q235 steel plate measure 6x5, 76mm inner diameter, and are 6mm thick. Holes are pre-drilled on all 4 corners of the metal plate, each hole measuring 12 in diameter - NOT Include Carriage Bolts.. DIY YOURSELF - Easily installed and detached. There are several accessories that you can use with the Galvanized Steel Pipe Leg Holder, include D2-Washer PlatesB0D542C59J and D4-Backer PlatesB0D53XN7J5. 24-hour response to Amazon email inquiries..

STABILITY GUARANTEED - These floating dock backer plate are made of hot-dipped galvanized Q235 steel hardware, the same identical to the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Boat dock backer plate enhance durability with an even coat that prevents paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - These galvanized backer plates have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - Dock backer plate are 4 Pcs in total. Each Q235 steel plate measures 5x5 and is 6mm thick. Holes are pre-drilled on all 4 corners of the metal plate, each hole measuring 12 in diameter - NOT Include Carriage Bolts.. DIY YOURSELF - Easily installed and detached. There are several accessories that you can use with the Galvanized Steel Backer Plates, include Pipe Leg Holderlike D3-B0D56DRLV6,D5-B0D53GDR53,D6-B0DH2HT3KB, Corner Bracketslike D7-B0D53VWGVY,D8-B0D53Z1JFV,D9-B0D53TCQBM. 24-hour response to Amazon email inquiries..

HEAVY-DUTY GALVANIZED STEEL CONSTRUCTION Crafted from 14 thick steel, this robust Boat Hardware undergoes a premium hot-dip galvanization process, creating a thick 60-300m, This heavy-duty shield provides 20-50 years of superior rust defense, far outlasting the thin 5-30m layers of electro-galvanized alternatives that are prone to peeling. UNIVERSAL FIT FOR DOCK PIPES Designed with a 2.3 inner diameter, this holder perfectly accommodates standard 1-78 O.D. dock pipes. The dual adjustable set screws provide a secure, customizable grip, ensuring your dock posts stay firmly in place while serving as essential Boat Deck Hardware for your marine setup. REINFORCED STABILITY SUPPORT Featuring a sturdy 5.27 x 5.27 backer plate welded to a 6mm thick base, this bracket delivers maximum structural integrity. It effectively stabilizes fence posts and dock frames, working in harmony with your Boat Dock Guards to maintain a secure and steady platform for boarding and mooring. BUILT FOR HARSH MARINE ENVIRONMENTS Engineered to hot-dip galvanization moisture, salt spray, and acids, this holder offers excellent corrosion resistance for both freshwater and saltwater applications. Its durable construction acts as a reliable Boat Dock Guard component, maintaining structural integrity and safety where standard finishes would fail. EASY SECURE INSTALLATION Designed for floating docks, this holder allows for smooth vertical movement with changing water levels. Pre-drilled with 716 holes for 38 carriage bolts, giving you a professional-grade marine system that lasts for decades.

ROCK-SOLID DOCK STABILITY - Built with industrial-grade Q235 galvanized steel - the same trusted material used in professional dock construction. Engineered to keep your wooden deck secure and stable through seasons of use.. GALVANIZED GREAT, STAYS FIRST-RATE - This dock hardware gets a tough hot-dipped zinc coat - the same pro treatment used on marine gear. Stops rust cold and keeps looking good through years of water wear. No peeling, no chipping, just solid protection that holds up.. WELDED TOUGH, HOLDS ITS STUFF - These galvanized dock connectors are built with industrial-strength welding that stands up to constant waves and vibration. Perfect for DIY dock builders or pro installations - they deliver rock-solid support that won't quit, season after season.. PLATE SPECS - Contains 2 large heavy-duty 90 inside corner dock plates, 2 large heavy-duty 90 outside corner dock plates, 6 small backer plates, 3 small 90 corner brackets, along with 28 M12 carriage bolts and 28 hex nuts.. DIY YOURSELF - Get professional-grade dock connections without the pro install. Our heavy-duty hardware sets up in minutes with just basic tools, creating rock-solid ramp attachments that last. Stuck We've got your back - message us anytime for quick answers..

Reliable Dock Corner Brackets Kit Dock bracket hardware provide reliable stability, strength and rigidity for your dock builing, making dock frame to be a reliable platform for attaching dock floats and decking material. Heavy Duty Stationary Dock Brackets Kit The floating dock brackets hardware is constructed from sturdy iron with rust proof baking finish, adequate thickness provides exceptional strength, ensuring long-term support for floating dock or stationary dock and withstand marine environment.. Compatibility Dock corner brackets ideal for supporting dock corners or other projects at 90 degrees The size of dock outside corner bracket is 5 x 10-14 and dock inside corner bracket is 5 x 8-34 is wide and stable enough to attachemt to your floating dock The 716 installation holes fit for 38 carriage boltsNOT included.. Widely and Easy to Use L shaped corner brackets feature more stability for corner projects and have wide range for floating dock construction,home improvement and industrial applications.. Package Included The dock corner brackets kit include 2 Dock inside brackets 2 Dock outside brackets for your dock building. Other Hardware for Floating Dock BuildingThe stationary dock side leg pipe holder bolts to the side of the wood floating dock frames to stabilize your pier ASIN B0DK8G8WGZ Dock Connector Hinges used for between-dock and shore-to-dock or ramp connections ASIN B0D47SYDFP The dock bottom pad prevent dock sinking down in the mud for the wooden or aluminium docks ASIN B0F38NXVB5If you need these hardware for dock building, please search the ASIN on the amazon.

STABILITY GUARANTEED - These floating dock base plate are made of hot-dipped galvanized Q235 steel hardware, the same as the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Dock bottom pad enhance durability with an even coat that prevents paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - These galvanized boat dock plate have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - Dock heavy duty bottom pad are main pin and locking pin in total. Each Q235 steel plate measures 8x8 and is 6mm thick.. DIY YOURSELF - Easily installed and detached. Our heavy-duty dock construction hardware is perfect for DIY projects, ensuring excellent attachment of your ramp to your floating dock. If you have any questions, you can contact us via Amazon email, we will reply within 24 hours..

Leg Holder bracket can effectively fix the galvanized pipe legs Helps dock smoothly slide up and down with the water levels. 2 Pack 5 in. x 5 in. x 18 in. leg holders.. Application anchor chain holder, HD leg holder or pile guide.. Leg Holder has 38 in. holes mounting 38 in. x 2-12 in. not included. If you have any questions, please feel free to contact us, we will provide you with satisfactory service in time..

Dock Base Plates Welded onto heavy-duty 8x8 backing plates, it offers robust durability and rust resistance in both freshwater and marine environments,Dock support hardware, constructed from high-grade marine-grade steel with a galvanized finish, is used for dock posts and poles.. Compatibility Dock base pads feature an inner diameter of 2-18 5.3 cm, fitting round dock posts and poles. Dock pipe brackets stand 4 inches tall with a dual-screw design for enhanced stability. The dock bracket hardware accommodates various pipe sizes alongside the mounting screws. Support The fixed dock base plate features a large surface area and substantial weight, enabling it to evenly distribute the dock's load onto the foundation. This reduces pressure on the mud foundation, preventing the dock from sinking into the ground. Connections The supports feature adaptable connection methods that securely integrate with other dock components, forming a unified, stable structure. This design facilitates installation and disassembly while accommodating uneven foundation settlement to some extent, preventing damage from stress concentration. Installation Dock base plate installs on ground or riverbed surfaces including sand, mud, and rock insert dock leg feet through base plate to bottom, then tighten mounting screws to secure dock legs firmly in place.

Heavy Duty Material Stationary dock side leg pipe holder is made from marine-grade steel with welded 5 x 5 backer plate. Solid, durable, and rustproof for long-lasting use in both freshwater and marine environments. Build Floating Docks Bolts to the side of wooden floating dock frames to support dock posts and poles. Allows the dock to move up and down with water levels while keeping it stable on lakes or rivers. Compatibility Inner diameter of pipe holder is 2.1, fitting round dock posts and poles. Adjustable with set screws to accommodate various pipe sizes. Mounting holes are 716, designed for 38 carriage bolts included. Easy to Install Pre-punched bolt patterns make installation fast and simple. Securely attach to wooden dock frames with the included carriage bolts. Adjust dock height easily by loosening or tightening set bolts with shoulder nut. Warm Tips Standard dock pipe size is 1.5 schedule 40, but the actual outside diameter is 1-78. Please measure your dock leg pipe carefully before purchase to ensure proper fit.

Stationary Dock Heavy Duty Side Leg Pipe Holder Dock brackets hardware constructed from sturdy iron with rust proof baking finish for dock posts and poles Welded onto a heavy duty 5 x 5 backer plate, featuring solid, durable and rustproof in the freshwater and marine environments Stationary dock heavy duty side leg pipe holder is aiming to provide the long useful service for your floating docks. Build Floating Docks Stationary dock heavy duty side leg pipe holder bolts to the side of the wood floating dock frames to support dock posts poles, allowing the floating dock to smoothly slide up and down with the water levels and stabilize the dock on the lake. Compatibility Inner diameter of the floating dock pipe holder is 2.1 and fit round dock posts poles Accommodating various pipe sizes by side of dock brackets hardware set screws The floating dock barckets hardware mounting holes is 716fitting for 38 carriage bolts carriage bolts are included. Easy to Use Pre-punched bolt patterns allows dock pipe barckets to easily install directly to the side of dock frame Installed the dock side leg pipe holder in the wooden floating docks with four carriage bolts included Loosen and tighten the set bolts with shoulder nut to adjust the height of the dock, allowing the dock float. Warm Tips The industry standard calls the floating dock pipe size as 1.5 schedule 40 but the O.D. is actually 1 78 Please check the size of dock leg pipe before purchasing dock pipe barckets. Other Hardware for Floating Dock Building The Dock Outside Corner leg pipe holder fit the corner of the floating docks to stabilize your pier ASIN B0D47TS6FS Dock Connector Hinges used for between-dock and shore-to-dock or ramp connections and not fit for individual dock sections ASIN B0D47VHP8J If you need these hardware for dock building, please search the ASIN on the amazon.

The size of the connector hinge backer plate is 4 x 4, with a hole diameter of 34.. Heavy duty hinge, thick metal, quality welds, well galvanized.. Dock accessories is excellent for attaching your ramp to your floating dock.. Dock hardware brackets have enough distance between the flanges to make them easy to connect with the main pin and locking pin.. Installed easily and easy to detach, Replacing pins was easy..

Connect Your Way - Configure your workspace to your liking with an ambidextrous USB-C cable that can be routed left or right.. Most Manageable - Remotely manage your smart docks without end-user presence from the Dell Device Management Console, which is the industry's first holistic peripheral management solution that configures, deploys, and updates smart docks over Wi-Fi.. Work Securely - Keep working confidently with enterprise-grade WPA-3 192-bit encryption for secure Wi-Fi communication. Safeguard your sensitive data with tamper-resistant, hardware-based encryption built into your Dell Pro Smart Dock.. Effortless Maintenance - Reduce IT efforts by scheduling updates during off-hours, while ensuring fleetwide firmware compliance and eliminating end user interruptions.. Designed for Sustainability - The Dell Pro Smart Dock SD25 is built with at least 65 post-consumer recycled materials and packaged with 100 recycled or renewable packaging..

STABILITY GUARANTEED - Floating dock kits is made of hot-dipped galvanized Q235 steel hardware, the same as the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Steel dock kits enhances durability with an even coat that prevents the paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - Galvanized boat dock hardware kits have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - Contains 2 large heavy-duty 90 inside corner dock plates, 2 large heavy-duty 90 outside corner dock plates, 6 small backer plates, 3 small 90 corner brackets, along with 28 M12 carriage bolts and 28 hex nuts.. DIY YOURSELF - Easily installed and detached. Our heavy-duty dock construction hardware is perfect for DIY projects, ensuring excellent attachment of your ramp to your floating dock. If you have any questions, you can contact us via Amazon email, we will reply within 24 hours..

STABILITY GUARANTEED - These floating dock pipe leg holders are made of hot-dipped galvanized Q235 steel hardware, the same as the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Dock connector hinge backer plate enhance durability with an even coat that prevents paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - These galvanized link kit have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - Dock heavy duty hinge link kit are main pin and locking pin in total. Each Q235 steel plate measures 5x5 and is 6mm thick. Holes are pre-drilled on all 4 corners of the metal plate, each hole measuring 12 in diameter - NOT Include Carriage Bolts.. DIY YOURSELF - Easily installed and detached. Our heavy-duty dock construction hardware is perfect for DIY projects, ensuring excellent attachment of your ramp to your floating dock. If you have any questions, you can contact us via Amazon email, we will reply within 24 hours..

STABILITY GUARANTEED - These floating dock washer plate are made of hot-dipped galvanized Q235 steel hardware, the same identical to the galvanized material commonly utilized in floating dock assemblies. Providing reliable stability for your dock structures on wooden deck material surfaces.. WELL GALVANIZED - Boat dock steel washer plate enhance durability with an even coat that prevents paint from peeling or chipping, while the galvanized finish provides protection against rust and wear in freshwater environments. You can confidently rely on them to endure for years in the water.. DURABLE WELDING - These galvanized washer plates have a wide range of general and industrial applications, making them ideal for both home improvement and floating dock construction. They offer sturdy support for structures under heavy vibration.. PLATE SPECS - Dock washer plate are 10 Pcs in total. Each Q235 steel plate measures 1.5x5 and is 6mm thick. Holes are pre-drilled on all 4 corners of the metal plate, each hole measuring 12 in diameter - NOT Include Carriage Bolts.. DIY YOURSELF - Easily installed and detached. There are several accessories that you can use with the Galvanized Steel Washer Plates, include Pipe Leg Holderlike D3-B0D56DRLV6,D5-B0D53GDR53,D6-B0DH2HT3KB, Corner Bracketslike D7-B0D53VWGVY,D8-B0D53Z1JFV,D9-B0D53TCQBM. 24-hour response to Amazon email inquiries..

Corrosion ResistanceThese Rough Cast Hot Dipped galvanized boat cleats are highly strong and offer excellent protection against rust. The package includes 4 dock boat cleats along with 8 bolts and nuts, making them suitable for both indoor and outdoor use. The galvanized coating on the metal dock cleats provides a strong defense against corrosion. The zinc layer acts as a protective barrier, effectively preventing the formation of rust and corrosion on the underlying metal. Hexagonal Hole for Easy InstallationOur boat tie down cleats feature a hexagonal hole, making installation quick and easy. With this design, the bolt will stay in place while securing the boat rope cleat, eliminating the need to hold the bolt with one hand and tighten with the other. This convenient feature simplifies the installation boat deck cleats process. Wide Footprint for StrengthOur boat dock cleats feature a wide 1.2 inch and Long 2.8 inch bottom footprint, providing exceptional strength and stability to prevent boat drift. These dock cleats 8 inch galvanized are ideal for boat docks, decks, and piers, serving as reliable hooks for securing boats, kayaks, and jet skis. With our strong and robust design, you can have peace of mind knowing that your watercraft will remain safely anchored, even in challenging conditions. Cleat Size BoltsThese galvanized boat cleats have a size of 8 inches in length and 1.9 inches in height, with a base measuring 2.8 inches x 1.2 inches. The mounting holes are spaced 1.65 inches center to center. The dock cleats 8 inch with hardware, including M8x4.1 inch 105mm bolts and nuts. The cleats for boat dock are designed to be a perfect size to fit any use, and if needed, the bolts can be cut to the desired length. Home Nautical DecorAdd a touch of maritime charm to your home with these boat cleats 8 inch. They are perfect for enhancing the decor of your maritime-themed, beach-inspired, garden, poolside, or coastal living spaces. These versatile dock tie down cleats can be used in various creative ways, such as cabinet pulls, boat cleat hooks for towels, rustic coat hangers, curtain tie-backs, or nautical coat hooks. Let these boat cleats metal bring a unique and rustic element to your home decor. AttentionBoat dock cleats 8 inch galvanized are compatible with a wide range of boat materials, such as wood, fiberglass, or aluminum. dock cleat marine cleats can be easily installed and secured to boat decks, docks, or other structures using appropriate fasteners and mounting methods.While galvanized cleats dock provide reasonable corrosion resistance, it's important to regularly inspect them for any signs of corrosion or damage.

Comprehensive Package for Versatility the package includes 4 pieces of dock hardware brackets and 8 pieces of hardware back plates, enabling it to meet your different dock assembly and configuration needs Perfectly fixed for use, these quality dock brackets ensure both the safety and durability of your wharf frame Please note that mounting hardware is not included. Robust Material for Lasting Performance this dock hardware is constructed using hot dip galvanized steel, a carbon structural steel base coated with a zinc layer, enhancing its corrosion resistance and extending its life span The kit displays high strength in any configuration, with proven rustproof, weatherproof, and corrosive resistant properties, particularly in fresh water marine environments. Convenient Installation for Increased Efficiency the floating dock hardware is designed meticulously to facilitate diverse dock assembly and configurations It's ideal whether you're connecting T section or L section at the dock terminal, strengthening the dock corner, or building a dock area. Size and Coverage for Enhanced Anchoring each of the component boasts a 5-14 inch x 5-12 inch square surface, covering a larger area for improved anchoring and docking Additionally, each surface has 4 pre drilled mounting holes, making positioning and alignment a breeze. Suitable for Marine Vessels and Accessories the dock hardware's suitable size makes it a fit for boats and their respective accessories It's designed to effortlessly accommodate and secure various marine vessels, further enhancing its versatility and making it a worthwhile investment for boat owners.

2 - Heavy Duty Side Leg Holders 5 x 5 x 18. 4 - Back Plates 5 x 5 x 18. Kit has 716 holes, Mounting 38 x 2-12 not included. Instruction plan is included. For stationary dock.

This pipe holder features a 3.5 outside diameter and a 3 inside diameter.. Welded onto a heavy duty 5 x 5 backer plate.. Manufactured using 14 galvanized steel hardware that is built to last.. Proudly made in the USA..

14 Galvanized Steel. 916 Square Holes. Robust Design. Made in the USA. Each leg of this angle measures 14 x 2-1316 x 5.

14 Thick 5 x 5 Backer Plates with 34 ears on DH-TM and 12 ears on DH-TF. Contains 2 Backer Plates and connector pin with hitch clip. Includes 8 - 12 x 3 Carriage Bolts, Nuts washers for use with 2x lumber. Fully welded ears for maximum strength. Hot Dipped Galvanized Hardware made in the USA.

14 Galvanized Steel. Robust Design. Made in the USA.

All Hardware Manufactured by Dock Hardware in the USA. Made of Galvanized Steel. Compare our robust design to our competition.. Hardware for up to a 16' dock. Add your own lumber.. During our Sales Event, Dock Hardware dropping our product price to make up for your shipping cost..

Includes 1 Male Corner, 1 Female Corner, 1 Pin Hitch Clip, and 16 3 x 12 Galvanized Bolt Sets.. Easily attach two sections of floating boat docks together.. Hot Dip Galvanized Heavy Duty 14 Steel Construction.. Proudly Made in the USA..

34 Diameter - Galvanized Steel. 3 Pin with Hitch Clip.. Robust Design. Made in the USA.

Kit allows you to add a joist to your dock frame for additional strength and rigidity.. Works seamlessly with the Dock Hardware Dock in a Box kit to add length to your dock.. Includes 2 Dock Angles, 4 Washer Plates, and 8 12 x 3 Galvanized Carriage Bolt Sets.. Marine grade galvanized hardware that will last for years to come.. Proudly made in the USA..

14 Galvanized Steel. Robust Design. Made in the USA.

Can retain up to a 38 chain.. Hot dipped galvanized 14 steel construction that's built to last.. Quality welded onto a 5 x 5 plate for easy pairing with other Dock Hardware products.. Easily fasten with 12 carriage bolts not included.. Proudly made in the USA..

14 Galvanized Steel. Robust Design. 5 high with 10.125 Legs and 34 ears. Made in the USA.

14 Galvanized Steel. Robust Design. Made in the USA.

14 Hot Dipped Galvanized Steel with 12 Ears. Robust Design. 916 square holes and 3.5 between centers. 1.25 Between ears. Made in the USA.

Complete Package for a Dock Setup this set includes 1 stationary dock connector hinge kit, providing the needed elements for a hassle free setup or upgrade of your dock system, this set comes with male and female hardware brackets and a dock hinge pin, adding a detailing touch to functionality, experience much function and convenience with this comprehensive kit. Reliable Material for Long Lasting Durability constructed of heavy duty metal, which is hot dipped and galvanized, this stationary dock connector hinge kit provides trustworthy strength and durability, featuring solid, durable and rustproof to fit for the freshwater and marine environments, making your dock not only functional but also reliable. Easy Assembly and Usage effortlessly attach the ramp to the floating dock using this easy to assemble connector, you can easily connect two piers of different widths using 4 inch bolts, nuts and washers not included, the user friendly design meets the needs of most users, making the process of dock modification or upgrading a breeze. Panel Size for Enhanced Functionality equipped with connecting panel sizes of approximately 5 inches in length and 3.5 inches in width, the floating dock hinges kit is suitable to connect two docks of different widths effortlessly, simply fit the pieces together and secure them with 4 inch bolts for a sturdy and reliable dock system. Hardware Features Ensuring Stability enjoy a sturdy and secure dock setup with this floating dock galvanized link kit, which comes with 716'' holes appropriate for 38 carriage bolts, the meticulous design details account for optimal stability and longevity of your dock, promising a seamless boating and docking experience.

Retractable Dock Cleat. Fit type Universal Fit. Attractive Looks much nicer than aluminum cleats. Safe The cleat is not exposed when not in use.

It's easy to securely tie your boat to the oversized S-shaped horns. Designed to accept even oversized lines. Recessed mounting holes to prevent line snag and fraying. Durable, reliable corrosion-resistant aluminum construction. Measures 10 inches, 6 18 inches center to center, with -inch fastener.

Ideal Package our package includes 4 fixed dock heavy duty side leg tube brackets, 4 carriage bolt sets, 1 wrench, you will get 4 sets The floating dock bracket hardware is equipped with suitable carriage bolts, so you don't need to use screws yourself, it's an ideal set for the people seeking to keep his or her dock working efficiently. Quality Material Ensures Longevity our stationary dock heavy duty side leg pipe holder is made of robust, quality steel, which translates to durability You can rely on this boat dock accessory for an extended useful life, thanks to the sturdy material composition Its silver color gel well with most decors, adding an aesthetic appeal to your dock. Ideal Size with a backplate that measures about 5 x 5 inches and a bracket diameter of approximately 2 inches, these dock accessories are designed for effective use They accommodate multiple sizes of pipes making them the popular choice for the people seeking practical yet powerful floating dock solutions. Easy to Use this pipe holder, part of our extensive dock accessories range, is extremely easy to install and use Just use the wrench we provide to secure the bolts in the kit Our kits have all the accessories you need. Accommodates Multiple Sizes of Pipes the floating dock kit can easily accommodate various pipe sizes, size adjustable via side bracket screws It's a versatile addition to our dock that has been designed to make your life on the water much easier and fun.

Powerful compatibility Power essential productivity across the AI PC workplace. The Dell Pro Dock offers enhanced compatibility and drives up to 100W of power to new mainstream Dell AI PCs and non-Dell PCs.. Modern manageability The Dell Pro Dock is part of the worlds most manageable commercial docking family, with flexible management capabilities, designed to uplevel IT efficiency and keep users working without disruption.. Thoughtful design Configure your workspace with an ambidextrous USB-C cable that can be routed left or right. Features a new robust USB-C connector, designed for enhanced durability.. A leader in sustainable innovation Experience up to 72 reduction in power consumption on standby mode. Built with at least 65 postconsumer recycled materials and packaged with 100 recycled or renewable packaging.. Upgraded for modern work Expand your views with native support for up to four high-res displays. Keep your PC accessories connected and charged with the latest ports, while staying productive with faster USB and network speeds..

Heavy-DutyBuilt with thick galvanized steel and reinforced welds, this hinge kit withstands harsh saltwater and freshwater environments. The 4 x 4 backer plate stability, while 34 mounting holes ensure a secure, wobble-free installation. Corrosion-Resistant for LongevityFeatures a rust-proof galvanized finish and Corrosion-resistant steel construction for long-term use in wet environments. for docks, ramps exposed to water and weather. Effortless InstallationThe malefemale hinge brackets align easily, and the locking pin system allows quick assemblydisassembly. Pre-drilled 716 holes simplify mounting on 2 x 8 or larger lumber 38 carriage bolts not included. Smooth Ramp-to-Dock MovementEnsures stable, quiet operation as water levels fluctuate. The sturdy design prevents wobbling, creating a secure walking surface for floating docks, gangways. UniversalFits most floating dock ramp setups. A dependable solution for deck hardware, dock builders, and marine applications.

Working Principle Dock pole augers are used in combination with aluminum pipes or other pipes to make dock poles, help anchor floating docks to prevent drift and reduce bumps. It can also be used to make sand anchors with PVC pipes. Size and Installation Floating dock hardware is suitable for 1.725 I.D. or 1.790 I.D. tubing, compatible with 2 O.D. aluminum dock post commonly. Easy to install, drill a hole at the bottom of the pipe and insert the sand auger, then tighten with the included bolt and nut. The bolt diameter is 0.39 9.85mm. Applicable Scenarios The dock post auger adopts a progressive spiral design, which can drill into the bottom of the lake or riverbed easily, providing strong stability. Dock auger can be used in various complex hydrological environments, and compatible with mudflat or bottoms of different sediments, including sand, clay, mud, gravel and others. Sturdy and Stable Material Manufactured with marine grade polymer composite materials, dock auger has outstanding weather and corrosion resistance. Boat sand anchor can be fixed in various sediments for a long time without rusting or cracking. Equipment The floating dock hardware is lightweight, durable, and portable, and will not scratch boats. Equipped with stainless steel screws and anti loosening nuts, providing strong and reassuring long term performance. Note Pipes are not included.

ULTIMATE PROTECTION FOR DOCK CORNERS BOATSInstall OCEANBROAD heavy-duty dock corner bumpers to create a robust, permanent protective barrier that shields both your dock's vulnerable corners and your boat's hull from costly collision and scraping damage. This professional solution effectively prevents impact damage during docking, in harsh weather, or from accidental contact, saving you significant repair costs over time.. HEAVY-DUTY MARINE-GRADE PVC CONSTRUCTIONEngineered from premium, high-density UV-resistant PVC with reinforced integral ribs, our dock bumpers are built to withstand the harshest marine environments. They resist fading, saltwater corrosion, and extreme temperature fluctuations, ensuring long-term toughness, flexibility, and resilience against impact and tearing. Temperature-induced hardness variations in PVC don't compromise its functionality.. COMPLETE SECURE INSTALLATION KITEach set includes 2 dock bumpers, 12 stainless steel screws, and 12 matching washersproviding everything needed for a permanent, rust-proof installation. The premium hardware allows for straightforward, one-time mounting to create a secure protective fixture that requires no seasonal adjustments or removal.. REINFORCED RIB DESIGN FOR IMPACT ABSORPTIONThe curved profile and robust external ribbing are scientifically designed to absorb and disperse impact energy. This design not only minimizes hull friction and abrasive wear but also significantly reduces lateral forces on both your boat and dock, promoting safer and easier docking even in challenging conditions.. OPTIMIZED SIZE FOR CORNER COVERAGE UNIVERSAL FITPrecisely measuring 15.7 inches in height and 7.9 inches in widthdepth, these corner bumpers provide comprehensive protection for standard dock corners. Ideal for installation on straight edges and corner surfaces of both floating and stationary docks in residential, commercial, and marina settings..

STRAIGHT BRACKET.

Attention 4 inch is the small Dock Cleat, Size 4 Overall length 3.89 in 99mm, About 0.17lb80g Per Dock Cleat, Screws 8 With matching 316 stainless steel screws and nuts for your choice. Anti-Corrosion Materials Marine dock cleat made of precision cast 316 marine grade stainless steel, heavy-duty open base boat cleat.. High quality Highly polished to a beautiful mirror-like finish.. Stainless steel cleat for kayak, boat, and dock.. The Perfect Product High polished surface with mirror-like appearance to match marinewatercraftboatyacht decoration, boat docks, decks, piers for tying up boats, etc..

Heavy duty hot dipped galvanized mounting hardware. Use to securely attach Dock 2 Go modular dock sections together. Hardware compatible with Dock Edge Inc. floating docks. Detailed construction and hardware placement instructions included. 2 Male T connectors 2 Female T connectors 2 Connector Pins 4 Backer Plates.

316 thickness. Universal hole placement fits 2 x 8 over lumber. Holes designed for use with any 3-12, 4-12, or 5-12 bolt patterns.

Made in Canada. Package height 25.908 cm. Package length 13.97 cm. Package width 17.78 cm. Package weight 1.647 kg.