Backward compatible with previous Dexron automatic transmission fluids and can be used as a much-improved replacement for older vehiclestransmissions originally using previous Dexron fluids. Improved performance over previous Dexron fluids in friction durability, viscosity stability, aeration and foam control, and oxidation resistance. Potential to enable improved fuel economy and longer transmission life. Provides for extended drain intervals.

For heavily-loaded vehicles, allowing operation at up to 70F higher while maintaining thicker viscosity than traditional ATFs. Use where Dexron III, Dexron II, Mercon or GL-4 gear oil are recommended. Dramatically less evaporation, less varnish of valves and clutches in extreme conditions. Reduced oxidation and lower volatility at high temperature. Allows high-temp operation without varnishing valves and clutches.

Backward compatible with previous Dexron automatic transmission fluids and can be used as a much-improved replacement for older vehiclestransmissions originally using previous Dexron fluids. Improved performance over previous Dexron fluids in friction durability, viscosity stability, aeration and foam control, and oxidation resistance. Potential to enable improved fuel economy and longer transmission life. Provides for extended drain intervals. Provides consistent shift performance, even in extreme conditions..

Our lowest viscosity, most shear-stable ATF for consistent operation, designed to satisfy Dexron-VI, MerconSP, MerconLV, Honda DW-1, Toyota WS, Mercedes Benz NAG-2, ZF-LG 6, 6 and 8 fluids, for use in automatic and manual transmissions.. Also satisfies API 70W75W and GL-4 gear oil requirements. Red Line offers the widest selection of fully-synthetic ATF on the market today. Reduced oxidation and lower volatility at high temperature. Allows high-temp operation without varnishing valves and clutches.

Material code - 98KY58. Helps improve and extend transmission efficiency, smooth shifting performance and fuel economy. Keeps transmissions clean to help provide outstanding performance even under severe driving conditions. Significant wear protection which can contribute to long transmission life. Helps to provide prompt and reliable lubrication at ambient temperatures down to -54 degrees Celsius.

Provides excellent performance in electronically controlled automatic transmissions. Dyed red for easy leak detection. Manufactured with high-viscosity index, premium-quality, hydroprocessed base oils and specially designed performance additives. Helps prevent rust and corrosion. Provides excellent shifting characteristics at high and low ambient temperatures, and guards against transmission shudder. Offers excellent thermal, oxidation and shear stability, as well as good low-temperature fluidity. Provides wear protection and inhibits the formation of gum, sludge, lacquer and foam. Not for use in applications where MERCON V, MERCON SP, Continuously Variable Chain Type Transmission Fluid, Motorcraft Premium Automatic Transmission Fluid, FNR5 Automatic Transmission Fluid or Type F Automatic Transmission Fluid is recommended.

Helps enhance transmission cooling function. Designed to protect metal surfaces from wear. Formulated to condition gaskets. Helps enhance transmission cooling function.

Backward compatible with previous DEXRON automatic transmission fluids and can be used as a much-improved replacement for older vehiclestransmissions originally using previous DEXRON fluids. Improved performance over previous DEXRON fluids in friction durability, viscosity stability, aeration and foam control, and oxidation resistance. Potential to enable improved fuel economy and longer transmission life. Provides for extended drain intervals.

Backward compatible with previous DEXRON automatic transmission fluids and can be used as a much-improved replacement for older vehiclestransmissions originally using previous DEXRON fluids. Improved performance over previous DEXRON fluids in friction durability, viscosity stability, aeration and foam control, and oxidation resistance.. Designed for anti-wear protection and shear stability. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts OE or ACDelco Professional. ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.

Premium synthetic blend formula exceeds DEXRON-III H requirements. Outstanding sludge resistance provides superior transmission life. Enhanced friction durability improves shifting performance. Certified and approved by General Motors for all cars and trucks that require DEXRON -VI. Also satisfied requirements of DEXRON, DEXRON-III H, III, IIE and II.

MEETS THE CHALLENGING DEMANDS of automatic transmissions?. ENSURES SMOOTH SHIFTING AND MAXIMIZE POWER TRANSFOR with enhanced anti-shudder protection. IMPROVES DURABILITY AND REDUCES FOAM AND OXIDATION with advanced anti-wear technology and a premium blend of base stocks. PROVIDES BETTER OIL FLOW in both low and high temperatures?.

For use in 95 of vehicles including most CVTs in operation with US registered light duty applications. High performance conditioning agents prolong seal elasticity to prevent leaks. Improved durability transmission life with anti-wear technology to avoid costly repairs. Enhanced high low temp performance supports transmission fluid in all weather situations. Full synthetic formula with advanced additives protects against transmission breakdown better than conventional fluids. American made formulated to maximize your transmission's life and improve its performance.

3X stronger against viscosity breakdown than leading full synthetic, based on Kurt Orbahn test in 5W-30 grade. 10X better high temperature performance, as measured in Sequence IIIH engine test vs. API SP test limit. 6X better wear protection. 1.4X better sludge protection, as measured in Sequence VH engine test vs. API SP test limit. Meets ILSAC GF-6 to prevent low speed pre ignition LSPI and timing chain wear protection.

Enhanced friction durability for smooth transmission performance. Superior high temperature protection to effectively resist oxidation. Unsurpassed protection against copper corrosion. Broad scope of vehicle applications improves workshop efficiency and inventory management.

Enhanced friction durability for smooth transmission performance. Meets DEXRON-III H requirements and satisfies requirements of DEXRON, DEXRON-III, IIE and II. Meets MERCON requirements. May also be used in power steering applications where MERCON is required.

TranSynd is a full-synthetic, automatic transmission fluid designed specifically for ALLISON transmissions TES 468 is now covered by TranSynd 668. Allows for extended drain intervals of up to 300,000 miles 48 months in general-duty transmissions and up to 150,000 miles 48 months in severe-duty transmissions. 12 times longer drain intervals than conventional and other non-TES 668 and non0-TES 295 fluids. Shear stability that helps maintain a stable viscosity which provides wear protection in gears throughout the drain interval. Improved gear protection, extended anti-shudder durability and extended clutch-friction durability.

Multiple ApplicationsThis transmission fluid pump fits standard quart bottles come with 28mm bottle cap,with an 8cc per pump stroke capacity. Suitable for dozens of uses including oil changes, siphoning gasoline, and transferring a wide range of fluids such as engine oil, biodiesel, kerosene, or shampoo,detergent.. Widely UsedThe liquid transfer pump is suitable for the maintenance of automobile car, truck, RV, boat, motorcycles, and other daily applications.. Long And Short Suction TubesSuitable For Tall Or Short Quart Bottles.Ensuring broad usability.. FunctionSafe Transfer. Enables precise fluid transfer between containers, or from container to engine, cooling system, and more..

Motorcraft MERCON LV is a premium-quality automatic transmission fluid. Recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require MERCON LV type fluid. OEM product. This product also provides excellent performance in electronically controlled automatic transmissions. Check owner guide and transmission fluid charts for application.

The 1 transmission problem solving additive. Contains no solvents. Can be added to existing fluid without draining any out. Effective in an extremely high percentage of cases. Extends needed protection to planetary gears. Reduces the need for frequent fluid changes, extends fluid life up to 4 times longer. A must for motor homes and commercial vehicles. Pour one 24 oz. bottle into your existing fluid without the need for draining. For larger or heavily worn transmissions, a second bottle may be required. In compact or sub-compact vehicles, a 12 oz. bottle is recommended.

Improves shifting. Extends fluid life. AFFORDABLE SOLUTIONS. Reduces noise and shudder.

For best performance, follow the manufacturer's recommendations in your vehicle owners manual.. Especially formulated for Automatic Transmissions requiring Dexron VI fluid. low viscosity Automatic Transmission Fluid. 100 Synthetic.

Our most versatile ATF, use where Dexron III, Dexron II, Mercon and Mercon V fluids are recommended, for use in automatic, manual transmissions and power steering. Popular applications Toyota Type T-III and T-IV, Honda ATF-Z1, Nissan Matic D, J K, Diamond SP-II, SP-III, Mazda ATF M-V, most BMW and AudiVW automatic transmissions. Also used with manual transmissions and transaxles like T-5, T-45, T-56 and late-model BMW, provides a GL-4 level of gear protection. Excellent cold weather operation.

Anti-wear protection for clutches, gears and pumps. Smoother and quieter shifting. Rust and corrosion protection. Proper friction control for long life performance and smooth lock ups.

Fit type Universal Fit. Package Dimensions 24.003 H x 19.177 L x 22.86 W centimetres. Package Weight 5.488 kilograms. Country of Origin United States.

Offers better anti- shudder durability. Better friction stability. Better anti-wear protection. Better oxidation stability. Better low temperature operation.

WIDEST SPECIFICATION RANGE - Compatible with FORD XL-12 Case Fluid, BMW LT 71141, Allison TES 295, TES 389, MERCON V, Dexron VI, JEEP ATF 3, ATF 4, HONDA DW1, KIA SP-III IV, Mazda ATF MIII MV, Nissan Matic DJKSW - See complete spec pictures of spec sheet.. FILL FOR LIFE in passenger cars, SUVs and light duty trucks. High shear and thermal stability make this fluid extremely long lasting. When used in non heavy duty service, it should not need to be changed for at least 150,000 miles.. HEAVY DUTY DURABILITY high load carrying capacity, high film strength and transmission protection, make this product ideal for heavy duty applications such as diesel trucks, towing, hauling and general high torque applications. OEM GRADE Meets or exceeds the specification and performance requirements when compared with OEM fluids from most manufacturers.. KEY PERFORMANCE METRICS Highly efficient torque transfer Lower transmission operating temperature Superb protection for key transmission parts Excellent seal maintenance Smooth rapid and precise shifting without slipping..