Lightweight and Portable4 section leg can adjust tripod height from 20.4''52cm to 64.1''163cm it can be folded to 15.5''39.5cm to make it easy to put it in the carrying bag the net weight with the ball head included is only 2.53lbs1.15 KG.. 360 Degree Ball Head36mm ball head can be rotated to any angle you want, helping to improve the range of camera activity during panning. It can withstand up to 17.6lbs8kg.The 360-degree panning dial lets you set up precision shots to capture the beauty of landscapes.. Efficient and FlexibleWith powerful and quick flip leg lock, only use one hand can open and close all the buttons in a few seconds. It's very easy to use, saving you more time and can more focused on enjoying the shooting.. Versatile AbilityThe center column inverted installation also with a short center column to achieve the lowest angling shooting, archery and special photography.. More CompatibilityThis camera tripod with standard 14'' thread,which can be applied to most Arca-Swiss quick release plates 14 screw is suitable for most cameras, DSLR camera, projector and telescope, etc..

Desk Mounting Stand you can mount the stand on the table with practical C-clamp that is up to 3.1 inch, saving much available space.. Adjustable Tabletop Stand Height of stand can be expanded from 12.9 inches to 22 inches the ball head is 360-degree rotation with the locking knob allows you to adjust at any angle.. Durable Material Made Our clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and compact carrying. Applicable and Universal Desk clamp stand with standard 14 screw can be mounted for most cameras and lights, such as ring light, DSLR camera, video light.. What you get aluminum stand2, 14 inch ball headr2..

Compact and portable, the storage length is only 7 inches 18CM, the weight is 1.54lbs0.7kg, easy to store, easy to carry when traveling.. 5 Section Leg design, each height can be adjusted arbitrarily. By quick tightening eccentric tube design, one twist and one pull can adjust the height of use. Maximum height 20.5'' 52cm.. Retractable center column, can be lifted and lowered freely, and can also be disassembled and installed in reverse for low Angle shooting.. Low center of gravity panoramic ball head, supports universal flexible adjustment, easy horizontal and vertical shooting, the base can be rotated 360. Strong expandability, with 14 screw holes for more expandable external interfaces. Can expand some other equipment such as microphone, fill light and more..

Multifunctional Desktop Stand The desktop light stand is equipped with a 14 ball head and a ring light adapter, which can be used for ring lights, DSLR cameras, webcams, smartphones, etc. Suitable for beauty shooting, live broadcast, interviews, etc.. Height-Adjustable Camera Table Mount The camera light stand features 3-section extending poles. You can adjust the height according to your shooting needs. The height adjustment range is 19-39 Note height with ball head and C-Clamp. The operation is simple, and the rubber ring wingnut helps you easily adjust and fix the length of the support rod.. Angle Adjustable Table Tripod Designed with a ball head 14 screw, you can freely adjust the angle of the product to achieve 360 panoramic rotation shooting. -9045 front tilt for multi-angle adjustment and without disassembly. The maximum load capacity is 6.6 pounds. The ball head is detachable you can remove it to equip another device with a 14-20 threaded hole, for example a 14-20 fluid head.. Flexible Desk Camera Stand There is a width adjustment button at the bottom. Adjust the width of the camera bracket to adapt to tables with different thicknesses. It is suitable for tables with a thickness of 1.85inches.. Lightweight Camera Mount Compared with the traditional light tripod, this product is more space-saving. It weighs only 15 ounces, making it easy to carry. Made of aviation aluminum alloy, durable and robust. The matte surface is easier to clean..

Multifunctional Desktop StandThe camera desk mount is equipped with a 14'' to 38'' adapter and 14'' to 58'' adapter, which can be used for DSLR cameras, smart phones, microphones, fill lights, action cameras etc, .Suitable for beauty shooting, live broadcast work, interviews, etc.. Height Angle AdjustableThe camera light stand is designed with 3 sections extending poles. You can adjust the height of the stand according to your own shooting needs. 360 degree gimbal on top, the microphone can be rotated 360, so you can keep the pickup direction is always facing the sounding place.. Aluminum Alloy MaterialThe arm part is made of aviation aluminum alloy, processed by high-precision CNC, and the surface is sprayed and anodized, which is durable and has a more textured overall.. Say goodbye to falling offWith the included 5 Cable buckle, the mic cable can be fixed on the stand body groove for a tidy look.The built-in spring balance system, More beautiful, will not fall off, through the knob, the load can be adjusted.. Stable C-Clamp Full Metal C-Clamp,0-50mm adjustable and more stable, suitable for most desk in the market..

Telescopic Metal Stand Extendable from 1743cm to 40102cm, this 3 sections 222528mm tube diameter telescopic stand offers a wide height range for flexible gear positioning. Built with robust aluminum alloy, it is durable with a maximum load capacity of 6.6lb 3kg. The twist lock to connect each section tube firmly holds them in place. Adjustable Desk C Clamp Suitable for desks up to 25cm in thickness, the desk mounted C clamp is a space saving tool to support the stand while keeping your desktable clean and tidy. The rubber pads also prevent scratches on wooden surfaces. Multi Angle Ball Head With a 360 swivel movement, the ball head enables you to set up your camera in any direction, and the U shaped notch allows -45to 90 vertical tilt for portrait or landscape camera orientations. Dual Mounting Options Besides the 14 threaded ball head, you can also use the provided 14 male to 14 female screw adapter to mount your device in a fixed vertical position, including ring light, phone phone holder not included, LED light panel, etc. Extensive Application Mount your DSLR camera, mirrorless camera, webcam, ring light, and LED video light for product photography, macro photography, overhead photography, video conferencing, live streaming, online teaching, and vlogging. The 24.3oz680g net weight makes it easy to carry around.

Tabletop Overhead Mount Stand The SmallRig desktop support kit is designed for indoor live streaming, desktop photography, video conferences, and any scenario requiring desktop shooting needs, and supports various devices such as cameras, cell phones, lights, microphones, etc. Flexible and Quick Adjustment The bracket is equipped with a modular metal knob for one-touch locking of height and angle. The main pole can be adjusted from 30 to 73cm in height, while the secondary arm is adjustable in length from 30 to 50cm. Additionally, the secondary arm offers a 360 infinite angle adjustment, allowing for flexible tilting angles to meet various shooting scenarios and needs. High Load-Bearing Capacity This desktop bracket features thickened pipe walls, widened base, and a gear structure design, allowing it to bear up to 2kg, ensuring stability and preventing deviation. High Compatibility The bracket's top features 14-20 and 38-16 threaded holes, while the extended arm is equipped with a detachable 360 ball head. Capable of accommodating two devices simultaneously, this setup offers a convenient solution for tabletop shooting scenarios. Quick Installation and Disassembly The extension pole is detachable and retractable, enabling quick setup and storage. Additionally, the extended arm can move on the main pole without the need for disassembly, facilitating unobstructed adjustments. Note Base can be mounted on surfaces with thicknesses ranging from 1 to 6 cm 0.4 to 2.3in.

3-Section Detachable Pole Overhead camera desktop mounting, Comes with 14, 38, 58 screw, Phone holder and 360 Ball Head. The overhead camera mount arm takes up less desk space, the base can be rotated 360, and Each rod can be adjusted 180 with Excellent flexibility. The combination of three rods can meet your shooting needs at any angle, for better shots and overhead lighting.. Sturdy 4.5lb Load The camera desk mount is made of high-end aluminum alloy material, High-precision CNC machining, Surface is sprayed and anodized, Firm seams, Which is durable. Can bear a load of 4.5lb2kg in a horizontal state and a maximum load of 6lb2.7kg, When suspended, Has amazing stability. Flexible Design Widely Used Each pole has an angle adjustment point, and there are 14 screw holes at the bottom of the camera arm, You can connect desktop camera mounts and tripods at any interface. Can hold a full size DSLR cameraWebcamProjectorPhoneVideo light Microphone etc devices, for Video recording, YouTube, Live streaming, Online lesson, Baking, Vlogging.. Stable Aluminum Padded Desk Clamp The aluminum tabletop light mount desk clamp with padded to protect your device or table from scratches. Dimensions can be extended up to 2.4in6cm in height, Compatible with most desks. With locking adjustment knob, Bring a more stable safer live broadcast experience. A necessory camera gear content creator kit for YouTubers.. Easy to Use Customer Service The assembly operation is simple, and the arm pieces are lightweight and easy to travel with if needed. The list includes table clamp1, extension pole3, mobile phone holder1, converter thread screw 14 to 381. If you have any questions, you can contact customer service at any time within 24 hours..

Premium All-Metal Build Heavy Duty - Solid CNC-machined aluminum alloy construction ensures stability as a professional camera tripod stand, supporting up to 40kg without flexing or wobbling.. Universal 14 Screw Compatibility - Perfect DJI tripodgimbal tripod solution for cameras DSLRmirrorless, gimbals, Insta360, Smooth 4, Ronin-S, Vimble 2, smartphones, and all action cams with standard mounts.. Flexible Height Adjustment - Extends from compact 24mm to 107mm for versatile low-angle shooting, tabletop filming, and stable gimbal positioning on any surface.. Pro-Grade Expansion Ports - Features 3 14-20 threaded holes with ARRI locating pins 3 auxiliary threaded holes for mounting lights, mics, or monitors.. Ultra-Portable Rugged - Weighs only 160g yet outperforms plastic tripods anodized anti-corrosion finish with rubberized feet for slip-free security in all conditions. Meeting various supporting needs in outdoor or indoor..

Multifunctional Desktop Stand The desktop light stand is equipped with a 14 ball head and a ring light adapter, which can be used for ring lights, DSLR cameras, smart phones etc. Suitable for beauty shooting, live broadcast work, interviews, etc.. Height Adjustable Camera Table Mount The camera light stand is designed with 3 sections extending poles. You can adjust the height of the stand according to your own shooting needs. The height adjustment range is 19-39 48.5cm-100cmNote height with ball head and C-Clamp. The operation is simple, and the rubber ring wingnut helps you easily adjust and fix the length of the support rod.. Angle Adjustable Camera Table Stand Thanks to the ball head 14 screw, you can freely adjust the angle of the product, so as to achieve 360 panoramic rotation shooting. -9045 front tilt for multi-angle adjustment, this design helps you to easily adjust the equipment without disassembly. The maximum load capacity can reach 6.6 pounds3kg.he ball head is detachable, you can remove it to equipe another device of 14-20 threaded hole, for exemple 14-20 fluid head.. Desk Camera Mount There is a width adjustment button at the bottom. This design can help you adjust the width of the camera bracket to adapt to tables with different thicknesses. It is suitable for tables with a thickness of 4.7cm 1.85. Compared with the traditional light tripod, this product is more save space.. Lightweight Desktop Camera Stand The table camera stand is made of aviation aluminum alloy and has a long service life. The matte surface is easier to clean. It weighs only 15 ounces430 grams, making it easy to carry..

Space Saving, Ideal Desktop Tripod Flat round base replaces traditional tripod legs, taking up less room, farewell to stumbling blocks. The A200 Round-Base Monopod is designed as desktop tripod for use in offices, studios, or any other location with a flat, solid surface. Versatile Table Top Tripod The RB-A200 supports a variety of mounting options, including 14 38 screw, and light adapter, offering a simple and sturdy solution for supporting cameras, microphones, lights, and monitors, replacing cumbersome conventional stands and tripods. Sturdy and Adjustable Desk Top Tripod Height adjustable up to 22. All-metal heavy duty round base is not easy to tip, has a fabric non slip, non scratch under carriage and will reliably and solidly support your kit up to a generous 22lbs. The A200 Round Base Monopod is designed as desktop tripod for use in offices, studios, or any other location with a flat, solid surface. Flexible Portable Setup for Live Stream Simple and reliable assembly and deployment-takes just seconds to set up. Two-piece construction is lightweight0.71kg, highly portable and small enough to fit in your ruck sack. Take it with you-one stop solution for on the go streamers and presenters. All-in-one Continuity For those creatives who are always on the go, the RB monopod system provides an instant studio location support set up, allowing you to quickly and neatly create your studio where-ever you may find yourself working and in addition you can take your set up with you and continue streaming.

3-Section detachable poleeach pole is connect and disconnect via 14 ball head. Each pole can be freely rotated and adjusted.. 2 Microphone Screw Adapters Come with 14 to 58 and 14 to 38 Screw Adapter, suitable for any kinds of microphones.. Standard 14 thread 1KG Load-bearing in the horizontal state. The ball head has a universal 14-20 screw head adapter, compatible with dslr, slr, ring light, led video lighting, lightweight cam, webcam. Perfect for phone photography, videography, art, cooking video recording, video shooting, vlogging. Stable Aluminum Padded Desk Clamp The Aluminum tabletop light mount with padded desk clamp, it is expandable up to 5 Centimetre2 inch, compatible with most desk in the market and provides maximum stability.. Aluminum Alloy Material The arm part is made of aviation aluminum alloy, processed by high-precision CNC, and the surface is sprayed and anodized, which is durable and has a more textured overall..

Sturdy Multi-Device SupportSecurely holds DSLRs, smartphones, webcams, and ring lights with its heavy-duty articulating arm. No more shaky footage during unboxing videos or cooking tutorials. Effortless 360 PositioningThe 14 ball head and camera boom arm allow overhead shots and side angles in seconds. Ideal for product photography and Zoom meetings. Industrial-Grade DurabilityReinforced aluminum holds 5.5lbs 2.5kg gear. Outlasts flimsy plastic stands for long-term content creation. Space-Saving Adjustable HeightExtends from 15 to 35 to fit compact desks. Perfect for small home studios. Tool-Free Clamp SetupRubber-padded C-clamp grips tables up to 2.6 thick. Start recording in 1 minutes, no drilling required.

Durable Portable - The desk camera mount stand is made of aviation aluminum alloy and has a long service life. Lightweightonly 16.8oz but durable. Excellent partner to take to any place for saticify your photing needs. The matte surface is easier to clean.. Height Adjustable - With an adjustable range of 10.8331.1, our webcam mount for desk provides ample flexibility for any overhead shooting or lighting needs.. Multi Angle Adjustable - High quality ball head guarantees a 360 rotation for panoramic shooting. -9045 front tilt for multi-angle adjustment, making it ideal for capturing the perfect shot. Extension capacity of stand is up to 4.4 lbs2 kg, retraction capacity of mount is up to 6.6 lbs3 kg.. Space Saving Base - C-clamp with a width adjustment button at the bottom. It is suitable for tables with a maximum thickness of 5cm2in. Compared with the traditional tripod, this C-clamp stand is more save space.. Wide Application - Ailight overhead webcam mount is great for supporting ring light, DSLR camera, microphone, phone holder, webcam, monitor, making camera stand an excellent choice for live streaming, makeup, photography, and zoom meetings..

Flexible Adjust Height and All-AngleThe most innovative design of webcam stand is that each bracket rod can be flexibly adjusted 360-degree rotation and 180-degree bending to any angle and position you need. Max Height 25 inches. It can achieve over 15.7 of horizontal reach and 360 rotation 31.5 of vertical adjustment and 180 rotation. You can also show more of your DIY creativity. Super Strong Joints With Fixed GearsAre you still using bendable snake arms and swing arms that will move and fall over time due to gravity Our phone camera stand with fixed gears can solve all your worries Durable reinforced aluminum alloy camera desk mount with outstanding bearing capacity, max load up to 3.5 lbs. Super safe and stable for your valuable devices.. 3-in-1 Wide Compatibility14 adapter is compatible with Webcam Brio 4K, C925e, C922x, C922, C930e, C930, C920S, C920, C960, C615, Action Cameras, GoPro Hero 98765, Projectors, DSLRs, ring light etc with standard 14 screw hole. Comes with an extra standard 14 to 58 screw adapter can fit for Blue Yeti, Blue Snowball, Yeti Nano etc microphones and shock mounts and more devices with a 58 screw hole. Also a universal phone holder is included for all 4-6.5screen smartphones.. Stronger Anti-Scratching ClampThe projector stand with an adjustable clamp base can open max to 2.2 inches. The clamp with sponge pad and we provide 2 extra rubber pads to protect your furniture from scratch, allowing you to securely clamp it on the desk, table, bed headboard, nightstand, kitchen counter etc. You can also carry the webcam holder stand anywhere since it is folded and extremely portable to carry.. Easy to Use Best ValueEasy installation within minutes, just several steps for assembly. We provide a standard user guide for you to make installation as easy convenient as possible, if you have any problem, please feel free to contact us at anytime. Package includes 1xAluminum Alloy Bracket, 1xDesk Clamp Mount, 1x38 Adapter, 1xMetal Ball Head, 1x14 to 58 Screw Adapter, 1xPhone Holder Mount, 2xRubber Pads, 1xUser Guide..

Desk Mounting Stand You can mount the stand on the table with practical C-clamp that is up to 3.4 inch, saving much available space. Adjustable Tabletop Stand Height of stand can be expanded from 13.5 inches 34.3cm to 23inches 58.4cm the ball head is 360-degree rotation with the locking knob allows you to adjust at any angle. Durable Material Made Our clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and compact carrying. Applicable and Universal Desk clamp stand with standard 14 screw can be mounted for most cameras and lights, such as ring light, DSLR camera, video light, Action Camera. What you get An adjustable stand, 24 hours customer service, 1-year warranty.

Designed with compatibility in mind, the 14 adapter securely fits most screw webcams, including popular models such as Brio 4K, C925e, C922x, C922, C930e, C930, C920, C615, and others with a 14 thread. Whether for virtual meetings, streaming, or content creation, rest assured your webcam will find a secure home.. Seamless Multitasking Companion Elevate your productivity with this versatile stand, designed to effortlessly hold both your cellphone and tablet simultaneously. Seamlessly switch between devices while cooking, studying, or attending virtual meetings, enhancing your efficiency and multitasking capabilities.. Flexible Adjustability With its double-joint design, this stand offers exceptional flexibility. Easily switch between portrait and landscape modes for optimal viewing, whether you're watching videos, conducting video calls, or following recipes while cooking. Plus, adjust the height from 2 to 18 inches and angle the arm as needed for customized comfort.. Durable Construction, Lasting Quality Crafted from premium materials, including high-density aluminum alloy and a sturdy iron base, this stand is built to withstand the rigors of daily use. The robust construction ensures stability and durability, providing a reliable platform for your devices for years to come.. Effortless Installation and Setup Experience hassle-free setup with our intuitive design. The stand can be quickly assembled without the need for complex tools or instructions, allowing you to start enjoying its benefits in no time. Simply follow the straightforward installation process and begin maximizing your productivity immediately..

Heavy Duty Base Base of webcam mount is metal material, with baking paint surface and comfortable hand feeling,sturdy and durable,anti-rust and anti-corrosion.Base diameter is 4.7 inch 12 cm and weight is 0.77 lbs,back of base EVA foam pad to prevent desktop from anti-scratches,one standard 14-20 screw hole of base for installing telescopic rod.. Flexbile Adjustable HeightTelescopic rod of webcam stand is metal construct,twisting lock knob to adjust heigth of rod freedom, the range is from 9.64 inch 24.5 cm to 16.06 inch 40.8 cm,capturing a best vistual viewing for user,it's great for studios,live streaming,video recording,zoom meeting etc.. Adjustable Position Mippko provides tripod ball head which is metal material construct,twisting the lock button can 360rotation and 90 tilt, allowing to adjust angle of webcam camere that you expect,users can can install phone clip on the mount with horizontally or vertically mode.. Secure Stable Webcam camera bracket made of sturdy metal material structure design,it can carry capacity is 3.3 lbs 1.5kg, operation is very simple, user don't worry about camera falling off the mount,it's very stable and secure.. Universal Standard 14-20 screw threaded compatible with logitech webcam C920,C920s,C920x,C922,C922x,C925e,C930,C930e,C615,C960,BRIO 4K,NexiGo N60,DSLR digital camera,ring light,phone clip compatible with 3.57 inch diagonal screen cellphoneiPhone,Galaxy,Nexus,HT,LG,Huawei,other smart phones and the others with 14 -20 screw hole devices..

Magic Arm with Super Clamp Crafted from robust aluminum alloy, the low profile but super grip boom arm camera mount supports gear or equipment like DSLR mirrorless cams, action cameras, webcams, microphones mics or smartphones up to 500g17.6oz. This table stand rig is ideal mounting accessories compatible with iPhone for overhead photography, vlogging, gaming, live streaming, video recording, Zoom calls and conferencing, videography, podcast, etc. Recommended for use in static situations. Articulating Arm with Ball Heads The two section friction boom arm offers a 55cm22 extended length, and is equipped with three sets of 360 dual ball head adapters, enhancing the flexibility of angle and height, and secured with a simple twist of the locking knobs. Each ball head comes with multiple rubber rings to firmly grip your gear and prevent accidental drops. For Both Flat Surfaces and Tube Rods The V grooves and pivot tips of the desk camera mount securely grip flat surfaces up to 250mm thick and cylindrical objects up to 1.640mm in diameter, such as desks, tripods, selfie sticks, light stands, shoulder rigs, bikemotorcycle handlebars, poles, etc. Also compatible with smallrig magic arms small rig camera accessories, compatible with DJI Ronin-M Ronin MX compatible with Freefly Movi 25mm and 30mm gimbal stabilizer rods. Anti Twist Stable Grip The overhead camera mount has an anti twist pin on each mounting interface, to firmly connect the overhead phone mount with the super clamp and the mounted device. Even the super clamp is outfitted with non slip pads, protecting your device from scratches and preventing unwanted wobbling during shooting sessions as content creator essential and influencer must have. Wide Compatibility For LED lights, field monitors, action cameras, mount adapter accessories compatible with DJI Osmo Pocket 3 2 Creator Combo Action 5 Pro 4 Insta 360 X5 Insta360 X4 X3 Go 3S Ace Pro GoPro Hero 13 Go Pro 12 11 10 9 Black AKASO Brave 7 8 EK7000 etc. The 2.2-3.257-80mm phone holder is compatible with iPhone 16 Pro Max Plus 15 14 Mini Samsung Galaxy S25 S24 Ultra Google Pixel 9, etc., for photography, video recording, and filming creation.

Super Sturdy - Max Load Up To 3.5 lbsUnlike other shaky webcam stands, KDD logitech webcam stand adopts rock-solid aluminum alloy construction and gear fixing design to minimize annoying bouncing while filming or surfing and protects your valuable device from tipping over.. Extendable Angle and HeightOver 15.7 of horizontal reach and 360 rotation 25 of vertical adjustment and 180 rotation The KDD logitech webcam mount equips with swivel ball head for horizontalverticalside adjustment to spin your camera at any angle.. Flexible Quick PositioningWhether sit, recline or lie in bed, the KDD clamp camera mount will securely hold your webcam, camera, or phone at the perfect height and viewing angle. Simply loosen the screw, spin it into the perfect angle, then tighten the screw.. Universal Compatibility The KDD camera mount stand fits all devices with a 14'' screw hole, for Logitech Webcam Brio 4K, C925e, C922x, C930e, C922, C930, C930e, C920, C920S, C960, C615, action cameras, Gopros, Projectors, DSLRs, etc. A universal phone clip is included for all 4-6.5 smartphones.. Wide ApplicationThe KDD gopro gooseneck mount with an adjustable clamp base can open maximum to 2.2, allow you securely clamp on the headboard, nightstand, desk, end table, kitchen counter, etc. Non-slip cushion protects your furniture from scratches..

Superior Mini Tripod Made of high-quality ABS material, the mini tripod is comfortable to hold and durable to use. non-slip silicone pad at the bottom to increase friction, preventing the tripod from sliding, this tripod offers maximum stability for your devices and helps you to take stunning photos from anywhere. 14 Screw Wide CompatibilityThe mini tabletop stands tripod for a camera with the standard 14 screw easy-to-install a variety of devices to be mounted, such as digital SLR cameras, gimbal Stabilizers, monopods, ball heads, vlog accessories, etc. 2 in 1 DesignThe mini tripod put to use the hidden retractable design 5.1 inch-7.5 inch just push the button that can be used as a lengthening handgrip selfie stick or tabletop tripod. Extensible Anti-SkidThe legs can be extensible and opened up wide With the anti-skid rubber pad on the end, which provides high stability on any surface without wobbles. Lightweight Pocket-friendly This mini tripod is most convenient to carry and Scalable to store easily, you can just slip it into the pocket. Only weighs 80g, which reduces the weight of your backpack with taking up minimal space for travel photography NotePackage Mini tripod only.

Upgrade Thick Clamping BaseWe have upgraded the clamp base. It is thicker and more durable. The clamping base is easy to be secured in place without the need to go overboard. Please place one hand over the clamp mount to move the goose-neck arm around.. Adjustable Height and ViewUp to the max 76cm 30 inches. With gooseneck, makess it easier and flexible to operate and access different best height you want. 360-degree rotating ball joint on webcam Mount supports different best viewing angles. Please place one hand over the clamp mount to adjust the arm around.Please ensure that the desk using is steady with No wobble and it is very important to to minimize annoying bouncing while shooting and protects your valuable device from tipping over.. Universal Compatibility The camera mount stand fits all devices with a 14'' screw hole, like for Logitech Webcam Brio 4K, C925e, C922x, C922, C930e, C930, C920, C615, action cameras, Gopros, Projectors, DSLRs, and etc.. Wide ApplicationThe web cam stand with an adjustable clamp base can open maximum to 2.77cm, allow you securely clamp on the desk, headboard, nightstand, end table, kitchen counter, sideboard, etc. Non-slip cushion protects your furniture from scratches. The clamp mount of the base is easy to be secured in place without the need to go overboard. If over-tightened, it may crack.. This Webcam Stand Max load weight 0.7kg 1.5 lb Not for heavy Camera and devices. The webcam will be more stable if you bend the tube as S or Zto clamp on the desk when using the webcam stand. If you have any problem, please contact us at any time..

Strong StabilitySpecially designed a metallic base with non-slip cottons to keep the webcam stand stable, moving it without generating any noise and leaving any scratches on the table. Height AdjustableThe stand for Logitech webcam is adjustable in height from 9.2 inches to 15.5 inches, with locking knob, and you can adjust it as you like, without worrying about falling. You can place your webcam in front of your monitor at the perfect eye level height for video conferencing. Angle AdjustableThe webcam stand for logitech c920 with steel ball head can 360rotation horizontally and 140vertically, easy to adjust and get the perfect angle in TikTokYoutube live streaming. CompatibleThe webcam stand for desk with its 14'' screw thread can be compatible with Logitech Webcam BRIO 4K Ultra HD C920 C920S C922 C922x C925e C930 C930e C615, GoPro Hero 8765,Arlo UltraProPro 2Pro 3Brio 4K,DSLR Camera, ect. Widely UsedThis webcam stand for logitec brio can be widely used for work, recording, Video Calling, zoom meeting, live streaming, photographing, online classes, stages, broadcasting and video recording, ect.

Super Sturdy and DurableUnlike other shaky webcam stands, JCWINY webcam tripod stand is made of strong metal and highly-durable ABS plastic, and designed with non-slip rubber pads to ensure the tripod remains stable, offer maximum stability for your devices avoiding annoying bouncing while filming or surfing and protects your valuable device from tipping over.. Extendable Height and AngleThe small desk webcam mount is designed with two adjustable height levels. You can extend the height from 7.5-12 inches. The tripod head ball-joint allows for 360-degree rotation and up to a 90-degree tilt.. Compact and Foldable Weighing in at just 260g0.57lb, with a foldable height of 7 inches. It is convenient for you to move it anywhere you want. Even the tripod stand with mini body?but with strong holding power to ensure your devices don't fall down and stays in place firmly. The maximum load of this desk tripod is 1.5 kg3.2lb.. Universal CompatibilityThe table tripod stand uses a standard 14-inch mounting screw. This fits the majority of digital devices with 14-inch mounting holes, such as camera, DSLRs, GoPros, webcams, ring light, projector, microphone and camcorders. A phone clamp with a 14-inch mounting hole for all 4-6.5 smartphones is included you can mount a smartphone or other device for multiple shooting needs.. PackagePackage includes 1 x Desk Tripod, 1 x Phone Holder, 1 x Rotation Platform, the tripod is not intended for overly heavy camera setups please use caution when utilizing larger devices or rigs. It is a perfect New Year Gifts.

Excellent Stability Specially designed webcam holder for monitor or laptop. Unlike other shaky and bulky webcam desk mount, JCWINY webcam stand for desk comes with a heavy metal base to keep it sturdy. The bottom of the base with anti-skid foam also enhance a desk grip to help keep the computer camera stand in place and avoid scratching the surface of a table or desk as well.. Premium and Durable Material The heavier base of this desk webcam mount is made of solid and durable metal. The extendable rod is made of high grade aluminum alloy, lightweight but with strong holding power to ensure your devices stable and never fall off.. Max Height 28 Inches The aluminum pole can be extended to max 28 inches, matching different height requirement of your monitor or desk, and ensuring that you can mount your webcam in middle of screen for reaching an eye level viewing angle. Perfect choose for Zoom meetings, Youtube, Tiktok, Facebook, live streaming of video games, online learning, and etc.. Foldable and Detachable The web cam stand for desk can be detached and folded down to take up minimal space at home or on the go. The extendable pole can be also used as a Selfie Stick or Handle Vlog Stick for cell phones, GoPro or other action cameras.. Multi-angle Adjustment The inlcuded metal ball head allows 360 degree rotation and up to 90 degree tilt, allowing to angle your webcam in any direction to help you look great on camera.. Wide Compatibility The webcam monitor mount fits for any 14 thread webcams, like for Logitech C925e C922x C922 C930e C930 C920 C920S C920X C615 Brio 4K, for NexiGo N60 and others. Also comes with a cell phone holder for all 4-6.5 smartphones. Max load Capacity 1.76 pounds0.8 kilograms..

PREMIUM ALL-METAL CONSTRUCTION Made of durable full metal, this stand provides outstanding stability for webcams and smartphones. The foam padding of the base prevents scratches on the desk and ensures a secure grip. The durable material texture can withstand everyday use and is ideal for streaming, video conferencing or mobile phone mounting in home offices, studios or work rooms.. ERGONOMIC HEIGHT AND ANGLE ADJUSTMENT With an adjustable height of 27-44cm, it allows for customized ergonomic settings. Combined with the 360 swivel function - rotate the 14 thread holder horizontally or adjust the angles to minimize posture damage during long video calls, streams or content creation.. Wide device compatibility With a standard 14 thread, the stand fits devices such as C920, C930e, Brio webcams and other 14 threaded devices. An integrated phone clip extends smartphone usability - perfect for mobile streaming, recording, or hands-free video viewing.. 360 swivel flexibility The 14 screw holder rotates 360 horizontally, allowing for effortless direction change. Adjust angles for optimal framing during video calls, light alignment for content creation or flexible positioning for webcam or mobile phone use. Suitable for streaming, vlogging or home office needs.. FULL MULTI DEVICE PACKAGE Includes 1 durable metal base, 1 phone clip and 1 webcam adapter. The B15 model offers a comprehensive solution for mounting webcams and smartphones. Easy assembly, suitable for global users - whether for professional facilities, creative content making or everyday device placement.DESIGN Compact desk stand provides secure grip and takes up little space.

Multifunctional Tabletop Tripod The small tripod for camera is equipped with a 14 ball head, which can be used for webcams, ring lights, DSLR cameras, camcorders, action cameras, smart phones, projector, spotting scope, prompter etc. Suitable for beauty shooting, live broadcast work, interviews, etc. Adjustable Height and Angle The height can be adjusted from 10 to 15.5. You can adjust the height of the webcam tripod according to your own shooting needs. The desktop tripod head ball joint allows for 360 degree rotation and up to a 90 degree tilt for multi-angle adjustment, and this design helps you to easily adjust the equipment without disassembly. Stable Triangle Design For logitech webcam tripod stand is made of high quality iron and ABS plastics and designed with non-slip rubber pads to ensure the tripod remains stable, offer maximum stability for your devices avoiding annoying bouncing while filming or surfing and protects your valuable device from tipping over. Universal Compatibility. The webcam tripod for desk fits for most digital devices with 14 inch mounting holes, like webcams, Gopros, small cameras, ring light, projectors, camcorders. In addition, package also includes a phone clip for all 4-6.5 smartphones. You can mount a smartphone or other device for multiple shooting needs. It is a great gift choice. Lightweight Compact Weighing in at just 260g0.57lb. With a foldable height of 9.8 inch, the web cam tripod stand is easy to carry. The maximum load of this desk tripod is 1.5 kg3.2lb. Package includes 1 x Desk Tripod, 1 x Phone Holder, 1 x Rotation Platform, the universal Tripod for Webcam is not intended for overly heavy camera setups please use caution when utilizing larger devices or rigs.

Now We're Talking Universal cell phone holder for desk for face-level video calls, recording videos this iPhone Stand for Desk is for FaceTime, Zoom meetings, Facebook calls, TikTok posts, YouTube videos, hands-free cooking. Small Phone Tripod Stand for Video Calls Adjusts from 9 to 13 inches for ergonomic position to eliminate neck and back strain a Desk Tripod for iPhone with professional camera angles for content creation and entertainment. A Stable Mobile Stand Adjustable Phone Stand for desk with non-slip padded and weighed metal base that won't tip, or slip extra wide holders won't drop your device the ideal iPhone holder for desk during video calls. Hands-Free Desk Tripod for iPhone Desk phone holder stand delivers desktop filming for family video calls, office conferences, content creation, and work-from-home meetings adjustable, telescoping positioning. ChatStand Phone Recording Stand Soporte para celular video recording phone holder for iPhone and Android delivers hands-free filming for office desk streaming, content creation, vanity stuff and more all in zero-plastic eco-friendly packaging.

Upgraded Version Based on the pain points of similar products Sag slowly and can't keep a position for your device, the arm of our gooseneck webcam mount adopts better materials and design. The webcam holder has improvements in both stability and durability. Easily adjust the gooseneck arm to bring your webcam to eye level or higher for a more professional look during Zoom meetings, live streaming, online classes, online teaching or webinars. Strong Clamp Mount The clamp base is made of strong and thicken ABS material, ensuring durability and reliability. The webcam desk mount can be adjusted to fit a surface of up to 2.77cm thickness it can be securely mounted on the bed frame, bedside, headboard, nightstand, desk, end table and kitchen counter etc. Additionally, the considerate silicone pad on the table clamp protects your furniture from scratches. Flexible Gooseneck Arm This webcam arm is made of high quality Aluminum-magnesium alloy solid core, making the webcam arm mount sturdy enough to hold your device firmly, yet flexible to bend in any direction to accommodate your view. The total length of the gooseneck is 30 in76 cm. With a 360-degree rotating ball joint, webcam Mount supports different best viewing angles. Wide Compatibility This web cam stand for desk fits for most 14 screw Webcams, like Logitech Webcam C920, C920s, C920x, C922, C922x, C925e, C930, C930e, C615, C960, BRIO 4K, NexiGo N60, DSLR camera, ring light and Other Devices with 14 Thread. Comes with a phone holder for iPhone series, Samsung Galaxy S23S22S21, Google Pixel 876, and most Android devices. Not suitable for Logitech Webcam C270 C310. Space-Saving Design With compact clamping base and slim body, the computer camera stand is space-saving and can be hidden on the back of your computer, maximizing your desk space and minimizing the Clutter. Say goodbye to other wecam stand with a bulky round base or space-taking webcam tripod.

Fully Adjustable for Perfect AnglesWebcam Stand provides a flexible range of motion for precise angle positioning.The adjustable height range of 9.2 to 15.5 inches ensures optimal shooting range and eye-level positioning, making it ideal for professional live streaming, video conferencing, and content creation.. Scratch-Proof Non-Slip BaseWebcam Tripod comes with a heavy-duty metal base for rock-solid stability The integrated padding not only prevent surface scratches but also significantly reduce noise from movement, maintaining a professional and quiet environment for recording and broadcasting. The upgraded base features 15 reduced diameter for valuable desk space savings.. Widely CompatibleThis webcam stand for desk is with standard 14 threaded screw compatible with Logitech BRIO C920 C920S C922x C615 C930e C922 C960 C925E C922x webcams and other camerasfill lights with 14-in Thread Screw. NOTE If connected to BRIO, please remove the bottom clip under your BRIO and you will find the 14 screw hole.. 360 Multi-Angle Ball Head for More PossibilityExperience the mind-boggling versatile Rotatable Ball with 360 swivel head. Position your webcam at any horizontal or vertical angleperfect for YouTube videos, video calls, and live streaming.. Inside the BoxPackage includes 1 x Heavy Duty Base, 1 x Telescopic Rod, 1 x Rotatable Ball Head, 3 x Cable Management Straps NOTE Webcam not included .

Max 30 Webcam Tripod for DeskThe desk tripod stand can be extended the height from 10 to 30 inches to reach a perfect height tripod for webcam. The tripod head ball-joint allows for 360-degree rotation and up to a 90-degree tilt, allowing to angle your webcam in any direction to help you look great on camera.. Premium Webcam Stand The webcam tripod stand is made of solid and high-quality durable metal and aluminum material making it stronger and sturdier to stay firmly on the table and will not easily roll over. The rubberized tripod legs also enhance a desk grip to help keep webcam stand in place without damaging a desk surface. The extendable tube is made of high grade aluminum, lightweight but with strong holding power to ensure your devices stable and never fall down.. As iPhone Webcam MountHolds your iPhone well and using it to realize the latest continuity camera in iOS 16 and macOS Ventura. You can adjust any angle and any height freely for Desk View. No worry your your your mount tilt backwards and no need to fold the monitor down to 45 degree for Desk View comparing to most mount that stuck on the monitor.. Universal Compatibility The table tripod stand uses a standard 14-inch mounting screw. Fits the majority of digital devices with 14-inch mounting holes, such as webcams, lighting, camera, DSLRs, GoPros, mini projector, camcorders and cell phones, for Logitech Webcam C925e C922x C922 C930e C930 C920 C615 Brio 4K. Coming with a phone clamp holder for any size of smartphones and even with thick case.. Foldable and DetachableThe web cam stand can be folded down to take up minimal space at home or on the go. The mini tripod base mount and the extendable pole are detachable and both can be use separately. The extendable pole can be also used as a Selfie Stick or Handle Vlog Stick for cell phones, GoPro or other action camera.. What you get 1 x Small Tripod Stand, 1 x Extendable Pole, 1 x Phone Holder, 1 x Rotation Platform, the desktop tripod for webcam is not intended for overly heavy camera setups please use caution when utilizing larger devices..

1s Completion Angle AdjustmentThe overhead phone mount can meet any angle you need. The ring light is connected to an arm. When you need to change the angle, just pull the ring light with stand directly to the angle and distance you need. It only takes 1s to complete. Perfect for the shooting of cooking,painting,art,nails and crafts.. No ShadowThe light above the phone is usually blocked by the phone, and the shadow will appear under the phone. The ring light for phone provides enough biocide light. And the phone is located in the middle of the circle light. The light will not be blocked and no shadows in the photos.. Stable and No ShakingThe phone mount is made of metal. It can keep it without falling, even if you connect to a device that weighs 3.3lbs.The phone standIncluding 2 holders can rotate 360, which can be compatible with almost all cell phones.. 3 Colors and 10 BrightnessThe LED ring light has 3 colors of light, white light, natural light and yellow light. Brightness is divided into 10 levels. You can easily adjust the color and brightness of the narcotic light according to the content you shoot. Your photos and video quality will be greatly improved.. Lifetime Warranty and Widely Compatible14 screws of the hinge arm can be connected to multiple devices. It can connect phone holder, webcam, digital cameras, circle light and GoPro. Therefore, the selfie light can also be used as a phone stand for deskcamera standtable lamp..

4-Section Adjustable Length The stand is freely adjustable, with an extended length of up to 98cm, suitable for large-sized desks, and 14 ball head offers flexible adjustments for shooting at different angles. Flexible Adjustment You can adjust the toothed joints of the arm for 180 versatility to any angle and position you need. Overhead shooting height Extendable to 65cm25.6inch Adjusts for various shooting angles, with a maximum height of 65cm to create flatlay photography. Sturdy C-Clamp Easily attaches to desks up to 48mm1.89inch thick with a sturdy C-clamp with Silicone Pad for secure grip. Load Capacity up to 2KG Crafted from durable aluminum alloy, the mount offers a high load capacity for devices up to 2kg4.4lb.

Upgraded Safe Clamp Mount Built with a robust clamp mechanism and equipped with 2 anti-skid rubber pads, this webcam stand for desk provides firm grip and stability, ensuring your devices securely in place. Fits a thickness of 0.59 - 1.9 inches, specially design for clamping the rod stick pole shelf tube desk table chair sideboards bed or tripod etc. Flexible Gooseneck Arm This webcam arm is flexible to adjust the position of your webcam. It can be positioned at whatever angle you need it at. Meanwhile, it is of high quality and sturdy enough to support your webcam. The total length of the gooseneck is 21 in52 cm and the max load of the webcam holder is 1.1 lb. Sturdy and Durable The clamp base is made of strong and thicken ABS material, ensuring durability and reliability. The gooseneck, with a thickness of 0.4 and a length of 21, is made of steel wire wrapped with good hand-feeling silicone material in the surfaces. Additionally, the considerate silicone pad on the table clamp protects your furniture from scratches. Swivel Ball Head By adjusting the knob, the premium metal ball head allows 360 degree rotation and up to 90 degree tilt, providing the capability to set up your webcam and mobile phone at any angle. Wide Compatibility This webcam desk mount fits for most 14 screw Webcams, like Logitech Webcam C920, C920s, C920x, C922, C922x, C925e, C930, C930e, C615, C960, BRIO 4K, NexiGo N60, DSLR camera, ring light and Other Devices with 14 Thread. Also comes with a phone holder for all 4-6.5 smartphones. Unsuitable for Logitech Webcam C270 C310.

Adjustable at Any Angle in 1 Second The ring light, cantilever stand, phone clamp, and base can all be flexibly adjusted at various angles. The ring light is connected to the cantilever stand. When you need to change the angle, simply pull the ring light with the stand to the desired angle and distance. It takes only 1 second to complete.. 3 Colors 10 Brightness LevelsMeet your lighting requirements with a selection of 3 distinct colors cool white, warm, and daylight, each with 10 brightness levels. This provides you with 30 different lighting options. Ideal for the shooting of cooking, painting, art, nails and crafts. Light up your beauty on social medias like tiktok, youtube, instagram. Uniform Lighting without ShadowsThe 10 ring light for phone provides ample light, this led ring light gooseneck mount design let you choose any suitable angle in 360to make the light is not obstructed and no blocked areas or shadows in the photos. Uniform lighting enhances the clarity of the object's contours and improves the visibility of details. Your photo and video quality will be greatly improved.. Stable and Save SpaceUpgraded with double springs, the metal cantilever bracket provides more stable support, preventing slipping and ensuring durability. Compared to a desktop base, the C-clamp mounting solution helps to better utilize the limited desk space. And the cantilever stand can be easily retracted into a compact size, not only saving storage space but also making it highly portable.. Widely Compatible After-sale Service14 screws of the cantilever bracket can be connected to multiple devices. It can connect phone holder, webcam, digital cameras, circle light and GoPro. We offer a free 12-month after-sales service. Feel free to contact us anytime with any questions or concerns.. Product List10 Ring Light 1, Overhead Mount 1, Phone Holder 1, Remote 1, Ball Head 1, Gooseneck 1, Instruction Book1.. Attention PleasePower with 5V 2A minimum wall charger.

Desktop Monopod Design The round base monopod is designed for desktop, office and studio use and anywhere else where there is a suitable flat, solid surface. They offer a one-stop, no trip hazard, simple and neat solution for supporting your cameras, mics, lights and monitors in place of cumbersome stands and tripods. Sturdy and Stable Construction The Monopod Leg tubes are made of 10X high-density Carbon Fiber with better heat resistance and corrosion resistance. 25mm thick Carbon Fiber tubes and 20cm diameter heavy-duty round base provides stable support with load capacity up to 33 lbs. Quick Height Adjustment Features lever lock mechanism for quick height adjustment with working height range from 16 inches to 28 inches. Universal Mounting Compatibility Universal Mounting Plate with Reversible 14 and 38 screw allows mounting of virtually any camera, camcorder, ball head, webcam, microphone, phone holder, monitor, light and other accessories. Non-Slip Base Protection The bottom has a non-slip silicone pad to avoid scratching the surface of the table or desk and will reliably and solidly support your equipment. Lightweight and Portable Weighing only 2 lbs, this carbon fiber monopod stand is easy to transport and set up for various shooting scenarios including live streaming, vlogging, and photography sessions. Complete Package Included Comes with ST-2070 Carbon Fiber Rod, Round Base, and Wrench for easy assembly and adjustment of your desktop monopod stand.

All -Metal Design Sturdier Heavier Webcam Stand comes with a heavy metal base to to keep it stable The bottom of the base with foam to avoid scratching the surface of the table or desk.. Adjustable Height Desktop webcam stand can provid you comfortable viewing angle which helps to fix your posture and reduce neck back strain. The height can be easily adjusted between 9.2 In to 15.7 in.. Ultimate Compatible This webcam tripod stand for desk is with standard 14 threaded suit for Logitech BRIO C920 C920S C922x C615 C930e C922 C960 C925E C922x webcam and Other Webcam 14 Thread Screw. Notice To use your Logitech BRIO or MX BRIO webcam with the Jidinung webcam stand mount, simply remove the pre-installed computer mounting clip or magnetic mount. This exposes the universal 14 screw hole at the base of the webcam, ensuring seamless compatibility.. 2026 New Design The webcam holder comes with a flexible 14 screw thread and the steel ball head can rotate 360 horizontally and 140 vertically, and can be adjusted to get different angles. for your better use. Package Contain 1 x Heavy Duty Base, 1 x Telescopic Rod, 1x Rotation Ball Head, 4 x Cable Ties.

Professional Desk Lighting for Any OccasionWhether you're working from home, video conferencing, or taking selfies, Yarrashop's 10.5'' desktop ring light with stand and phone holder provides the perfect lighting for any situation.. Customizable Lighting OptionsWith 3 color lighting modes and 10 brightness levels, you can easily adjust the color temperature and brightness to suit your needs. Perfect ringlight for zoom meeting, video calls, conference, and live streaming.. Sturdy and Adjustable DesignMade with a sturdy metal bracket and weighted base, this desk ring light with stand is height extendable from 22'' to 29'' and can be rotated 180 to find the perfect angle. The adjustable phone holder fits all iPhone and Android devices.. Upgrade Your Video Calls and SelfiesUpgrade your video calls and selfies with Yarrashop's 10.5'' desk ring light. It's perfect for Zoom meetings, makeup, and live streaming, and provides professional lighting for any occasion.. Easy to Use and PowerThis video conferencing lighting kit is powered by USB and can be plugged into a USB charger, power bank, computer, or laptop. It's easy to set up and use.. CUSTOMER SUPPORT Our product is backed by a 2-year after-sales support, ensuring that you can enjoy your purchase with confidence. If any issues arise within this period, our dedicated customer service team will be on hand to assist you.Thank you for choosing our company.

Height Adjustable Telescopic rod of webcam stand is metal construct, twisting lock knob to adjust height from 11.4 inch to 18.7 inch It can be above computer monitor when in max height.. Multi-angle Adjustment The inlcuded metal ball head allows 360 degree rotation and up to 90 degree tilt, allowing to angle your webcam in any direction to help you look great on camera.. Compact design The webcam mount is lightweight but with strong holding power to support webcams, small action cameras, mini light and microphone.Note The maximum load of this webcam desk mount is 500g1.1lb.. Universal Compatibility The web cam stand with a standard 14-inch threaded fits the majority of digital devices with 14-inch mounting holes, such as webcams, mini light, action cameras, and cell phones, for Logitech Webcam C925e C922x C922 C930e C930 C920 C615 Brio 4K and for facecam mk2. Coming with a phone clamp holder for any size of smartphones and even with thick case.. What you get 1 x Round Base, 1 x Telescopic Rodney, 1 x Phone Holder, 1 x Rotation Platform, the desk camera mount is not intended for overly heavy camera setups. Note The maximum load of this webcam holder is 500g1.1lb..

Aluminum Alloy Material SmallRig live desktop camera bracket is suitable for indoor live streaming, desktop photography, video conferences, and other scenarios that require overhead shooting. The C-clamp and articulated arm of the desk mount stand are made of aluminum alloy, making it rust-resistant, reliable, and light to carry. This bracket is suitable for desktops with a thickness of less than 67mm. Note Please pay attention to the size information to avoid purchasing errors.. Multi-Angle Shooting The adjustable bracket supports 360 rotation, allowing you to find the perfect angle for your live broadcasts or recordings. The 3-section detachable articulated arm provides flexibility and customization options, making it easy to carry and assemble according to your needs.. Strong Load-Bearing Capacity With a tilt load-bearing capacity of 2.7kg5.9lbs and a horizontal capacity of 3.3kg7.3lbs, this bracket can securely hold your camera equipment in place. NoteBall Head Load Capacity 1kg 2.2lbs.. Additional Device Support The desktop camera mount comes with an aluminum alloy crab-shaped clamp and holding arm, enabling you to attach additional devices for efficient shooting.. Highly Compatible Featuring a 14-20 screw, phone clip, lamp holder, 14-20 to 38-16 adapter, and 14-20 to 58-11 adapter, this overhead camera desk mount is compatible with various devices such as SLR cameras, ring lights, microphones, and mobile phones.. Package includes C-Clamp x 1, Articulated Arm x 3, Crab-Shaped Clamp x 1, Holding Arm x 1, Phone Clip x 1, Lamp Holder x 1, 14-20 to 38-16 Adapter x 1, 14-20 to 58-11 Adapter x 1, User Manual x 1..

Two in One Table Mount The extendable desk mount is equipped with one 14 ballhead and one adapter for ring light, which is a perfect choice for supporting ring light, DSLR camera, smartphone, panel light, etc. It is suitable for making up, live streaming videography, photography, or other shooting work.. Height Adjustable The desktop light stand is designed with 3 sections extending poles, with a height-adjustable from 13-33 35.4cm-90cm, which provides the possibility for any overhead shootings and lightings. A rubber ring wingnut helps you to fix the pole easier. The bracket is suitable for desktops with a thickness of less than 5cm1.96. Note Please pay attention to the size information to avoid purchasing errors.. 360 Swivel Ballhead The ballhead with top 14 screw ensures 360 panoramic rotation for panoramic shooting, -9045 front tilt for multi-angle adjustment, which helps you to easily adjust your device without removing them. The load capacity is 3-10KG. Note In order to enhance the stability of the bracket, the base of the bracket is an integrated design and cannot be disassembled.. With Extension Arm The total length of the aluminum alloy extension arm is 355mm, and the load-bearing capacity can reach 2KG. The extension arm is equipped with an 18mm ball head, and the top 14 screw can be connected to fill lights, microphones, smartphones, etc.. Tough Reliable Made of aviation aluminum alloy material, with the strong tube diameter 22-25mm, it is more reliable and stable to use and ensures a long time use without getting rusty. The matte surface is easier to clean without leaving any fingerprint..

Always Framed Perfectly Easy height adjustment and dual-orientation support keep you looking great in both portrait and landscape.. All-in-One Setup Securely mount your smartphone, webcam, or ring light on one stand to create your own production studio.. Stable. Portable. Simple A weighted, anti-slip base prevents wobbles, while the compact design makes it easy to take anywhere.. Switch in Seconds Rotate 360 and reconfigure your setup for calls, streams, or presentations in an instant.. Wide Compatibility The webcam mount fits for any 14 thread webcams, like for Logitech C925e C922x C922 C930e C930 C920 C920S C920X C615 Brio 4K, for NexiGo N60 and others.

Hidden Phone Tripod Mount with Cold Shoe The phone tripod comes with a smartphone holder with a cold shoe mount, allows you to mount a microphone or led video light for selfie Vlog. 14 Thread for Extension The camera flexible tripod has a 14 thread, allows you to mount a minotor magic armnot included. Wide Compatiblity There is a universal 14 srcew to mount a DSLR camera, sony canon nikon the range size of phone holder is from 65-95mm, compatible with iphone 121111 pro11 pro maxxsxs max8 plusSamsung note 10galaxy s10 and more mobile devices. Vertical and Horizontal Shooting The ball head allows the smartphone clip 180 rotation, no matter phone or camera, support veritical and horizontal shooting. Camera Flexible Tripod The octopus camera tripod can be used as a tripod or selfie stick, the phone tripod can wrap on lampposts, fence posts, tree limbs, chairs, doorknobs etc.

Adjustable Height and AngleThe NexiGo tripod stand is designed with three adjustable height levels. You can extend the height from 3-13 inches. The tripod head ball-joint allows for 360-degree rotation and up to a 90-degree tilt.. Stable and DurableMade of highly-durable ABS plastic and designed with non-slip rubber pads to ensure the tripod remains stable, this tripod offers maximum stability for your devices and helps you to take stunning photos from anywhere.. Compact and LightweightWeighing in at just 0.24 lb. with a foldable height of 6.4 inches, this tripod is easy to carry when traveling, hiking, or camping, allowing you to take photos of the whole family and capture those precious moments.. 14 Extension InterfaceThe tripod uses a standard 14-inch mounting screw. This fits the majority of digital cameras, DSLRs, GoPros, webcams, and camcorders. The smartphone clamp with a 14-inch mounting hole is included you can mount a smartphone or other device for multiple shooting needs.. Inside the BoxPackage includes 1 x Tripod, 1 x Phone Holder, 1 x Rotation Platform. While durable, the tripod is not intended for overly heavy camera setups please use caution when utilizing larger devices or rigs..

Camera desk mount stand Up to 27.56 inch center shaft height ,no limit shooting from any angle or distance. 29.53 inch super long extending arm, three stages free adjustments,challenge and inspire your creativity.. Compatible with ring light, DSLR camera, video camera, panel light, key light, webcam, and more. also also also The Pole top has 14 screw hole, you can mount other equipment.. 360 Ballhead adjust to any angle and 14 Screw allows you to expand your rig. And padded desk clamp expandable up to 5cm1.96 inch.. Aviation aluminum alloy material, extremely sturdy and durable, single-arm load-bearing capacity is up to 2KG4.41lbs--Suitable for almost all cameras.. NOTE Webcam, Panel light, Ring light, DSLR camera Not included..

12 Powerful LED Ring Light with 240 LEDsThis upgraded 12-inch ring light features 240 high-efficiency LEDs delivering 10W of bright, stable lightingabout 25 more powerful than standard 10-inch models. Provides soft, even illumination thats perfect for video calls, live streaming, makeup, photography, and content creation.. Adjustable Brightness 5 Color Temperature ModesCustomize your lighting with 10 brightness levels 10100 and 5 color temperatures from 3000K to 6000K warm to cool. Easily create the ideal lighting for different environments while reducing shadows and enhancing facial clarity.. 62 Extendable Tripod Stand Selfie StickThe versatile tripod stand extends up to 62 inches and quickly converts into a handheld selfie stick. Lightweight yet stable, making it ideal for Zoom meetings, recording videos, taking photos, travel shots, or overhead filming.. 360 Adjustable Angles Wide CompatibilityDesigned with a 360 rotatable head and adjustable phone holder for flexible shooting anglesportrait, landscape, low-angle, or overhead. Compatible with most smartphones, cameras, webcams, GoPros, and even small tablets.. Complete Ring Light Kit for Content CreatorsIncludes everything you need 12-inch LED ring light, adjustable tripod stand, phone holder, Bluetooth remote shutter, and USB power cable. A complete lighting solution for YouTube, TikTok, livestreaming, online teaching, video calls, and photography..

Universal Phone Mount Adapter- Works for smartphones up to 3.54 inch wide. By a standard adaptor screw thread, it is compatible with digital cameras like NikonCanon, DSLR, Action Cameras adapters Included.. Durability for Years- Flexible octopus style legs are made of thicker premium metal, reinforced with a rubber coating and compact foam. It is rigged to the greatest degree to handle the wear and tear of everyday explorations or the rigor of adventure.. Increased Stability- A high grade metal ball joint supports phonecamera up to 1kg. Locks the heaviest smartphone into position securely. The non-slip feet design keeps this adjustable tripod steady on virtual ground surface.. Selfie Mode Made Possible- A wireless remote control allows you take shots portrait and landscape from a distance of up to 30 feet. Perfect for taking selfies, group photos, filming, vlogging and steady tripod shots..

Universal 14 Ball Head Hot Shoe AdapterThis desktop C clamp stand features a 14 screw, a mini ball head, and a detachable 14 hot shoe adapter, making it compatible with webcams, DSLR cameras, ring lights, LED video lights, microphones, phone holders, monitors, camcorders, and more.. Adjustable Height 360 RotationEasily adjust the stand height from 18 46cm to 23 58cm. The 360 rotating ball head allows you to tilt your mounted device from -90 to 90, ensuring the perfect shooting angle. The secure locking knob ensures stability.. Sturdy Durable BuildConstructed with premium aluminum alloy and stainless steel, this camera mount can support devices up to 2kg 4.4 lbs. The soft rubber padding on the clamp prevents scratches and protects your desk surface.. Space-Saving Desk Clamp DesignThe heavy-duty metal C-clamp securely mounts to desks with a thickness range of 2.36 6cm to 5.11 13cm. The clamp can be attached to the front or back edge of your desk in seconds, saving space while keeping your setup organized.. One Year Guarantee Each of our product has been carefully tested to ensure that there are no potential problems. Please contact us if any question about our product..

With 14 inch Screw HeadThis tripod mount is with a 14 inch universal thread head, super wide compatibilities. The stand is compatible with Desktop Logitech Webcam C930e, C930, C920, C922x, C922, Brio 4K, C925e, C615, camera, action cam and Ring Light. Totally adjustableThe head, arm joint and the base are flexible, you can adjust the swing arm angle and height as your wish to meet your different application scenarios like video recording, live streaming, baking The Jaw Clamp fit the Desk, Table, Sideboard Max thickness 4.6cm 1.8 inches. 14 ball head and phone holder included This mount accessory kit comes with a 14 screw ball head and a phone holder The smartphone holder side and bottom has 14 inch screw hole. Support max width 8.2cm phones like iPhone 12 pro, 12, 11, 11 pro, XR, XS, XS Max, X, 8, 8 plus,7,7 plus, 6sSamsung Galaxy S20 S10 A51 A50 A10e S9 Note 9, Google Pixel 5 Pixel 4a 3A 3A XL Pixel 4 Pixel 4 XL, LG, Motorola Moto G7 etc. Perfect for phone photography, vlogging, video shooting. Durable and SteadyThis table stand is made of high quality metal, can support max 2 lbs Around 4pcs iPhone X1111Pro, 6pcs Google 3A, 7pcs iPhone 7, 2pcs Sony A6000mounted product on it Make more possibilities with this overhead shot tripod, make great baking crafting demo videos, live stream, online lesson, phone scanning, Craft. Full Tripod KitIt comes with 1x Arm, 1x Jaw Clamp, 1x Ball Head, 1x Cell Phone Holder.

Universal Compatibility InnoGear quality-made gooseneck stand is compatible with most webcams and almost all mobile phones. It is suitable for logitech webcam BRIO C920 C920S C922 C922x C925e C930 C930e C615 etc expect for Logitech Webcam C270 C310, and other devices with the standard 14 screw hole.. Unique Design The total length of the gooseneck is 25 in63cm including the length of the ball head and the max load of the stand is 1.0 lb. The upgraded desk mounting clamp is built with anti-scratch sponge pad to protect the table and the max extent of it is 1.8 in4.6 cm to fit most desks.. Adjustable and Flexible This gooseneck stand is flexible to adjust the position of your webcam. It can be positioned at whatever angle you need it at. Meanwhile, it is of high quality and sturdy enough to support your webcams or phones.. Swivel Ball Head By adjusting the knob, the premium ball head can 360 rotate, providing the capability to set up your webcam and mobile phone at any angle. You will like the range of ball head's motion during the use of it.. Nice Phone Holder The phone holder is spring-loaded and can extend up to 4.0 wide, fit for almost all smartphones. You can easily adjust the phone holder to find one angle you desire horizontal, vertical, high-angle, low-angle and more. It can be used for many purposes like livestreams, video chat, distance teaching, etc..

Kit includes all the items you need. Webcam stand, gooseneck, base and tripod head.. Specially designed a metallic base which has 4 non-slip cottons on the bottom to fasten the webcam stand, moving it without generating any noise and leaving any scratches on the table.. The height of this webcam stand is adjustable and extends up to approximate 21inches53cm when you are using gooseneck arm. You can adjust to a suitable angle and height to get the best shooting range.. The tripod head with a 38-14 screw thread and the steel ball head can rotate 360horizontally and 140vertically for your better use.. Fit for Logitech Webcam C920 C920S C922x C615 BRIO C930e C922 C960 with standard 14 screw hole. Widely used for any stores, home studio, stages, broadcasting and video recording, etc..

Webcam Stand Length with Gooseneck can extend to the max at approx. 64cm 25 inches Item Weight Approx. 400g 14.1oz. Desk Mount Webcam Clamp fits Desks, Tables, Sideboards, or Beds with a max thickness of 6cm2.3inches. Perfect for most occasions.. 14 adapter fits for most 14 screw Webcams, like Logitech Webcam Brio 4K, C925e, C922x, C922, C930e, C930, C920, and C615.. Mini tripod head for 360-degree rotation can be adjusted to get different angles.. This Webcam Stand has a Max load weight of 0.5 kg 1.1 lbs Not for heavy Cameras or devices. The webcam can become more stable if you bend the tube as an S shape to clamp on the desk when using the webcam stand. We provide a standard user guide to help make installation as easy convenient as possible. If you have any problems, please feel free to contact us at any time..

Adjustable BrackeALTSON desk camera mount has 3 extensions, the height can be adjusted from 17 to 41 with the fixed knob, perfect for saving space. It can perfectly used for makeup, interviews, lighting, live streaming, video shooting, etc.v. Stable silicone table clipsThis Aluminum desktop light stand with silicone table clips can extended up to 2.2 is perfect for supporting ring lights, phone, microphones, panel lights. Compatible with most tables on the market, will not damage the table and provide greater stability.. The desk mount stand is equipped with 1 additional high-quality metal ball head to allow your devices to freely rotate 360 back and forth or tilt up and down 90 for flexible positioning.. Easy InstallationAll necessary hardware and instructions are provided for fast and simple assembly. The desk clamp provides a stable mount for your light or camera and makes setup a breeze. What you get aluminum bracket2, phone mount 2, 38 conversion screw2, 41 ball head2 , 180 days warranty, if you have any problems, our team will help you solve the problem within 24 hours..

ailight overhead camera mount is designed with 3 sections extending poles, with a height-adjustable from 15.75-33.45 via twist locks, which provides the possibility for any overhead shootings and lighting. ? The extension holding arm with 2 sections is extendable from 11.8-20 30-51cm and able to mount horizontally on the desk light stand through fix clamp. the arm have 1kg2.2lbs load capacity. Easily Mount the camera stand on the edge of desk with the C clamp, desk thickness is between 0.2-inch to 1.97-inch. Inner rubber pads protect your desk from scratches and bring added security. Featuring standard 14 screws on both vertical and horizontal ball head, the table camera stand can hold camera, phone clip, LED light, webcam, and more. Suitable for making up, video recording, live streaming, Zoom meeting, online teaching, interviews, etc. ? Made of aviation aluminum alloy material, with the strong tube diameter 18.6-25.7mm, our overhead camera stand is more durable and stable to use and ensures a long time use without getting rusty.

Super Solid Stable StructureArticulating arm camera mount is crafted using high-quality cold-drawn aluminum tubing combined with a double locking C-Clamp. This ensures unparalleled robustness, stability, and a sleek appearance. Moreover, the durable ball head, made entirely from metal, boasts a unique CD texture for enhanced locking strength.. Scalable FlexibleThree-Sectioned Design Magic Arm's two upper sections have a 180 vertical adjustment range and full 360 horizontal rotation. The base vertical pole connected to the C-clamp is telescopic, extending up to an additional 9.5 inches. This ensures exceptional flexibility, making it effortlessly adaptable to various use cases and requirements.. Versatile Compatibility FunctionalityOverhead photography camera holder come with a metal ball head featuring a 14 screw and included 14-38 and 14-58 adapters, along with a baby pin, this mount offers widespread compatibility. Supporting a maximum load of 6.6lb, it's the prime choice for diverse multimedia equipment such as SLRDSLR cameras, webcams, and mics. Ideal for activities like video recording, live streaming, overhead photography, online meetings, and projection.. Double Locking Desk-FriendlyOverhead camera desk stand c clamp design prioritizes desk, the c clamp includes a protective soft pad to prevent scratches, and the dual locking screws with anti-slip pads guarantee a secure grip without causing damage.. Exquisite Package Easy StorageUnboxing our product feels akin to unwrapping a carefully curated gift, thanks to its thoughtfully designed packaging. Beyond the premium aesthetics, the interior boasts thick foam compartments for each component, ensuring everything remains scratch-free and pristine, even during storage..

Desktop C-clamp Stand Top with 14'' thread. And asy to install microphone, Led video light, monitor to DSLR, camcorder or digital camera. The 360ball head can ensure 360 degree horizontal rotating and 180-degree bending to any angle for photography. The hot shoe compatible with female 14-20 threads mounts any item With a female 14-20 Thread to the camera hot shoe.. Flexible Position Mounts to the back of your desk range from 0.5 to 1.85'' thickness via a heavy-duty C-clamp. The clamp with sponge pad to protect your furniture from scratch, allowing you to securely clamp it on the desk, table, bed headboard, nightstand, kitchen counter etc.. Phone Holder Clip 360 degree rotating, verticalportrait mode and horizontallandscape mode or any angle as you need. Adjustable width from 5.5cm to 10.5cm, attachable to any regular-size cell phone, tripod, monopod or cameraTwo standard 14 screw thread interfaces meet your various needs. Small and compact enough to fit it in your pocket.. Adjustablement with Locking Knob Desk mount stand can be adjusted to any height within seconds as needed. Extended from 14 to 23.6 Inch as you need.. Package List and Service C-Clamp, Adjustable stand, 360 Ball Head,Phone Holder Clip. Welcome to send email to us when you have questions..

Stable Sturdy Mount Desk camera mount is made of sturdy aluminum alloy, which is durable and has a more textured overall. Phone stand with 3 sections strong tube diameter 25mm22mm19mm ensures better stability and prevents your device from shaking. Adjustable Height With an adjustable range of 14.8-32.7, our camera stand for desk provides ample flexibility for any overhead shooting or lighting needs. The 3-section extension pole is highly portable and easy to store. C-Clamp Saves Desk Space C-clamp is suitable for the table thickness up to 2 inch, you can adjust the knob on the bottom of the phone stand to fit different tables. It saves space, rubber pad can prevent slipping and protect desktop from being scratched. 360 Ball Head High-quality ballhead guarantees a 360 rotation for panoramic shooting. You can tilt the device up and down at 45 or 90-degree angles, making it ideal for capturing the perfect shot. Payload capacity of webcam mount is up to 4.4 lbs2 kg. Wide Application Our overhead camera mount is great for supporting ring light, DSLR, microphone, phone holder, webcam, monitor, making camera mount for desk an excellent choice for live streaming, makeup, photography, and zoom meetings.

Full HD 1080P Webcam with Tripod The EMEET's new and improved C960 computer webcam with professional mini tripod kit is designed and optimized for professional video. We keep the 1920 x 1080p video to provide smooth video. The fixed focal length keeps objects within a focal length range of 11.8 to 118.1 inches to provide sharper images. The C960 USB webcam comes with a privacy cover for your privacy protection needs. The webcam with a portable tripod is a great choice for your office.. Three Adjustable Heights The flexible web camera tripod features three adjustable heights 5.7-12.2 inches. When you need to video conference, you can adjust the tripod to 5.7 inches, a height at which others can see your face up clearly. When you need to stand up for a group presentation or explain a PPT, set the tripod to 8.7 inches, with the upper half of your body visible. When you need to shoot the whole body, you can extend the tripod to a maximum of 12.2 inches.. Built-in 2 Noise Canceling Microphones The EMEET 1080p webcam comes with 2 built-in noise canceling microphones, picking up your voice and filtering out background noise to produce excellent radio effects. 90 wide-angle view for small to medium-sized meetings. The desktop camera allows you to enjoy a clear sound, an immersive meeting experience, and improve your productivity. When installing the webcam, remember to select the EMEET C960 USB webcam as the default device for the microphone. Low Dependence on Light Conditions The EMEET 1080P HD webcam applies automatic low light correction technology, which enables the web camera to capture images in low light. The EMEET C960 computer camera also features low-light enhancement, color enhancement, and exposure adjustment, allowing you to look your best even in harsh, dim light. We think on everything Our tripod comes with a non-slip base, so you don't have to worry about slipping during use.. High Compatibility Tripod The compact tripod with a 14-inch screw is perfectly compatible with a wide range of devices. It can be used with webcams, phones, cameras, and action cameras. Meet the different needs of your daily life. You can use the tripod to record videos, broadcast live on social media, document your beautiful daily life in small gatherings, and provide stable and clear images during online meetings. Phone holder not included..

Multifunctional Our overhead phone stand has a 14 inch universal thread head, making it compatible with a wide range of devices, including iPhones, Logitech webcams, LED lights, and Pico Projector. Upgraded Base To solve the off-balance issue when stretching, our durable and strong metal stand is made of metal columns and a heavy pedestal that weighs more than 1.2 kg. The bottom of the pedestal has an EVA material non-slip mat to absorb shock and prevent scratches on the table.. 360 Rotatable Phone Holder Our overhead phone stand features a 360-degree rotatable phone holder with a universal ballhead that supports various angles for adjustment, allowing you to capture the perfect shot. The phone holder accommodates phones ranging from 2.461mm to 3.794mm, making it compatible with 99 of smartphones in the market.. Wide Compatibility Whether you're a content creator, teacher, artist, or chef, our overhead phone stand is the perfect tool for you. It's ideal for a variety of tasks, such as live streaming, tutorials, baking, cooking, crafting, drawing, calligraphy, web conferences, online classes, makeup, and videos.. Easy to Install Our overhead phone mount features a portable design that can be set up in just a few minutes. If you encounter any problems while using the product, our customer service team is always available to assist you..

LS15 Professional Metal Overhead Tabletop Mount Stand made of aluminum alloy material, max load-bearing capacity up to 10kg22.05lb. Stable and sturdy, can put a lot of devices, great for making desktop video photo, recipe videos, specimen, exhibit, stop motion animation, crafts, painting demos, streaming, overhead shots. Flexible assembly, great for DIY segmented design, flexible adjustment of length and height. Also, additional poles arm or super clamp can be purchased for expansion. Poles corrugated anti-slip, secondary anti-deflection locking screws and laser engraved tick design. Come with super clamp, install on the ploe to expand the camera, lights, mic and other. The C-clamp is enlarged and thickened,width up to 90mm3.54in, suitable for the most of desktop. The c-clamp saves you more desktop space.

THE ALL-NEW 3RD GENERATION PHONE HOLDER This phone stand for bed is not only a new upgrade to the product strength of the LISEN cell phone holder, but also a 3rd-generation upgrade that leads to the iPhone stand market. It has a brand new phone clip, a steel body, a bi-directional adjustable base that is suitable for various scenarios, upgraded shock-absorbing springs, cable storage, and added tension adjustment knobs at each joint.Crafted with care, providing you with most perfect experience. INFINITE ADJUSTMENT AND ONE CLICK RELEASE BED PHONE HOLDER This phone clip adopts the latest mechanical structure, matching the most suitable biting force with the size of the phone, different from the previous two generations of spring clips on the market that are too tight or too loose for injury type biting. And it comes with a built-in silicone pad, providing comprehensive protection for your phone. One touch release makes it so convenient and simple for you to put and remove your phone. SUPER STABLE AND SUPER FLEXIBLE PHONE STAND This gooseneck phone holder has upgraded the shock absorption spring, and each joint has an elastic adjustment knob, ensuring that the phone can remain stable at any angle of use, meeting your various usage needs, such as watching videos in bed, shooting videos outdoors, and operating the phone on the cell phone stand for desk. While maintaining stability, it has the advantage of flexible adjustment with one hand, which is worry free and effortless. AVIATION GRADE METAL MATERIAL FOLDABLE BODY The phone holder for bed desk body is made of steel material, which is a perfect combination of durability, stability, and texture. The best materials are used to create the best products. In addition, it supports convenient folding, making it easy to store and carry around. After use, it can be easily pushed and neatly folded together, making it neat and beautiful. 100 ANGLE ADJUSTMENT AND WIDE COMPATIBILITY BASE The new generation of mechanically adjustable bases are suitable for most scenarios in life, such as use on tables, bedside, kitchen, baby chairs, sofas, camping, trucks, and more, used as a phone holder for recording,waiting for you to discover applications. Flexible robotic arms can achieve any angle you need during use. This product supports bulk purchasing, making it ideal for businesses and large orders. ACT RESPONSIBLY AND SUSTAINABLY As a responsible company, LISEN operates sustainably in accordance with high social standards. We are going deeper and deeper into applying sustainability in the way we do business. LISEN phone stand for desk bed also come with a free 24-month warranty and friendly customer service. Our team of experts is always there to support you.This product supports bulk purchasing, making it ideal for businesses and large orders.

VERSATILE Close the legs to use it as a comfortable grip to capture videos that stand out from the crowd. DSLR COMPATIBLE Thanks to the universal 14 Inch screw thread and stability, Pixi can be used with a variety of devices, including iPhones with KLYP, compact cameras, CSC and entry level DSLRs. SAFE When the button is released, the ball is locked automatically in the selected position. COMPACT The ideal solution for photographers searching for a lightweight, portable and easy-to-use support system. FUN Find new perspectives and new ways to capture your shots flawlessly, while being provided with a secure base for any shooting situation.

MT-08 Upgraded Selefie Tripod The ULAZNI MT-16 is upgraded based on MT-08, one more adjustable level, more stready and add a cold shoe for microphone and led video light mountingphone holder is not included. Portable Vlog Selfie Tripod The extendable tripod can works as handle grip or selfie stick, mini and lightweight, best accessory for vlog. Cold Shoe 360 Ball Head Tripod Stand The ball head is 360 rotatable, fit any angle you want and supporting vertical shooting there is a cold shoe on the ball head, enable to mount a mircrophone for voice recording and led video light, which give a best solution for video quality improvement. Lightweight Easy to Carry the tripod is only 22.5cm, 170g. it's so mini and lightweight that you can put in any storage bag or backpack. pocket size, easy to take outside for outdoor activity, travel vlog, hiking. Rubberized Design Universal 14 Screw------Soft rubber offers comfortable feeling and also anti-slip 14 screw compatiable with Action Cameraa6000a6300a6400a6500a6600rx0iirx100 viim1 m2 m3 m4 m5 m6 m7 Canon g7x markiimark3Nikon DSLR camera. Note Phone holder is not included, if you want phone holder please refer to B094HZN79Q. Note Vertical mode bear weight is 500gHeavy camera please refer to the asin B09H2ZBYKM whose loading weight is up to 2.5kg. Note If accessory missing, please contact us.

Introducing NEEWER BASICS Simple and practical, NEEWER BASICS is an economical product line that focuses on essential functions and designs, without unnecessary extras and materials. Mini Desktop Selfie Stick Tripod Fully extend the selfie stick to use it as a tabletop tri pod, or handhold it as a stabilizing grip, for a quick switch between grip and stand modes. Made of aluminum alloy and plastic, the lightweight small pocket camera phone tripod supports your action camera or smartphone cellphone holder and action camera adapter included up to 2.2 lb1kg. At 4.4oz126g and folding to 717.8cm, the stand is for outdoor shooting, travel videos, or filming on the go. 360 Rotation 90 Tilt The single U notch design on the all metal ball head enables the 360 horizontal and 90 vertical rotation in a flexible yet stable way, suitable for overhead, low angles, vertical and horizontal shooting, ideal for vlogging, live streaming, video recording, filmmaking creation as content creator essential and influencer must have adjustable desk tripod stand phone holder compatible with iPhone. Easy Height Adjustment Elevated Central Axis The tripod legs with a 3 section central axis can be effortlessly adjusted from 717.8cm to 11.830cm, a compact table standing or handheld travel selfie stick tri pod compatible with iPhone for capturing satisfying shots. The non skid rubber feet provide a secure grip on any surface for stable shooting. Tripod for Phone Action Camera The desktop selfie stick stand adjustable phone holder is compatible with iPhone 16 15 Pro Max Plus i Phone 14 Samsung Galaxy S25 S24 S23 Ultra Google Pixel 9 8 7 Pro Android mobile, with one cold shoe for photography accessories or filming gears like a monitor, fill light, microphone. The mount adapter is compatible with GoPro Hero 13 Go Pro 12 11 10 Black compatible with DJI OSMO Action 5 Pro 4 3 compatible with Insta360 X5 X4 X3 GO 3S Insta 360 Ace Pro etc.

Superior Stable Desktop Tripod The table top phone tripod features seven intertwined aluminum wires on each leg, capable of withstanding thousands of folds. The non slip feet keeps your phone secure on any surface. Phone Tripod with Flexible Use Unlike the other short desk tripods, the small handheld tripod octopus stand with 14 screw and mobile phone holder compatible with iPhone flexibly wraps around posts, posts, branches, or bike handlebars, and supports up to 4.4lb 2kg. 360 Swivel 90 Tilt This lightweight vlogging tripod enables 360 swivel and 90 tilt, with a locking knob on the side to fasten your device with a twist, and allows for switches between portrait and landscape modes. For Cellphone Camera Compact table tripod travel portable stand with cell phone holder attachment, action cam adapter and cold shoes for more accessories. Compatible with iPhone Air 17 17e 17Pro 17ProMax 16 16 Pro 16 Pro Max 15 15 Plus 15ProMax 16e Samsung Galaxy S26Pro S26 S26 S25 Ultra S26Edge Android Pixel 10Pro smartphones, compatible with GoPro Hero 13 Go Pro 12 DJI OSMO Action 6 Pocket 4 Pocket 3 Xtra Muse Creator Combo Insta360 X5 X4 X3 Insta 360 Ace Pro Go 3S Sony Nikon Canon DSLR. Portable Versatile Made of aluminum alloy and ABS, the tripod with phone holder fits your bag for on the go. Ideal a tabletop tri pod desk stand or handgrip selfie stick for vlogging, live streaming, video recording, filmmaking creation, etc., as content creator essential action camera accessories and influencer must have photography gear.

CONSTRUCTION The tabletop tripod is made of Aluminum Alloy, durable and solid With the use of a vlogging tripod, it can achieve greater performance and maintain image quality for cropping larger picture sizes. UPGRADED DESIGN Adjustable height 6.7to 19.717 to 50cm, 5 sections adjustable height leg tubes, so this handheld tripod is the best choice for macro shooting with smaller size, lighter weight and closer distance. PANORAMIC VIEW 360 degree swivel ball head with bubble level and Arca type quick release plate provide you with a panoramic view 3 position leg angle adjustment system provides flexible shooting for photography and videography. NON SLIP DESING Non slip feet design to keep the tripod steady. Max load weight is 11 lbs 5kg for optimal performance. COMPATIBILITY Compatible with many DSLR Camera Video Camcorder. Compatible with Canon, Nikon, Pentax, Panasonic, Sony, Samsung, Olympus and other digital DSLR cameras.

TL253A versatile 3-piece light tripod the TL253A telescopic table light stand with 3 sections can be extended from 24 inches to 47 inches 61 cm to 120 cm to allow convenient height adjustment via screw caps. The ball head can be rotated 360 and the 14 inch screw can mount various LED panel lights, ring lights and cameras with a weight of up to 8.8 lb 4 kg. 2 piece horizontal DS001 holding arm the desk telescopic arm DS001 with 2 sections is extendable from 11.8 - 20 inches 30-51 cm and can be mounted horizontally on the light stand thanks to its oval clamp. The ball head can be swivelled 360 and the 14 inch screw can mount webcams and LED lights with a weight of up to 2 lb 0.9 kg. Adjustable desk clamp attach the adjustable C clamp to the edge of your desk or table with a thickness of up to 3.5 inches 9 cm and enjoy reliable stability by taking up the smallest space on the desk. Inner rubber pads protect your desk from scratches and provide extra security. Universal mobile phone holder adjustable between 2.5 - 4 inches 64-105 mm, the mobile phone holder is compatible with iPhone 14 13 12 11 X 14 Pro Max Galaxy S23 S22 Ultra S21 S20 Pixel 7 Pro 6a Mate 50 Pro and other available mobile phones on the market. Practical screw adapters Two screw adapters 14 inch to 38 inch and 14 inch to 58 inch give you the opportunity to mount a variety of devices and accessories for extensive applications, such as Zoom calls, video conferencing, podcasts, live streaming, YouTubeTikTok videos, online lessons and more.

Sturdier Heavier Webcam Tripod comes with a heavy metal base to to keep it stable The bottom of the base with foam to avoid scratching the surface of the table or desk. Compatible with Logitech C920s StreamCam C930e C925e C922 C615 Brio 4K 2022 2017 C270 C310 webcams etc. Adjustable Height Webcam Stand Adjust webcam stand is adjustable in heigh from 9.2 to 15.5 to find perfect height for live streaming on TikTokYoutube, Zoom calls. Look your best when the camera turns on. Tripod Extension Webcam Arm with Lock Knob Our webcam stand with lock knob, and you can adjust the height as you like, without worrying about falling, allows you to get the best picture quality in your live streaming or online learning. Adjustable Angle Webcam Tripod A fully rotating desktop tripod allows you to angle your webcam in any direction to help you look great on camera in zoom meetings. Compatible This webcam stand for desk is with standard 14 threaded suit for Logitech BRIO C920 C920S C922x C615 C930e C922 C960 C925E C922x webcam and Other Webcam Lights with 14 Thread Screw. This webcam desk mount is most suitable for such online activities as Zoom meetings, Youtube, Tiktok, Facebook, live streaming of video games, online learning, etc.

Dimmable Ring Light The 6 inch circle light has 3 lighting mode and each lighting mode has 10 brightness level, the swivel ball head is 360 degree rotation which can meet your angle for the purpose. The led ring light is USB powered, then you can use power bank, wall charger, laptop etc to supply the power. Shooting At Any Angle The head, arm ball joint and the base are flexible, you can adjust the swing arm angle and height as your wish to meet your different application scenarios like top down video recording, live streaming, baking The Jaw Clamp fit the Desk, Table, Sideboard Max thickness 5.2cm 2 inches. Extra added Flexible Clip Arm The scissor boom arm, ball head, C clamp, phone clip holder and extra flexible clamp arm which provide your multiple devicee.g Cell Phone, Lightweight Camera, Webcam, Ring Light, Mini projector various combinations application scenarios. It's much useful for Online Teaching Meeting, Overhead Video Recording, Cooking, Baking, Crafting, Drawing, Nail Art, Tattoo etc. It has a max load weight of 3 lbsNot for heavy duty Cameras or devices.. Sturdy Versatile The desktop tripod is lightweight, support your phone, ring light, compact cameras, action cameras. A necessory vloging gear for YouTubers, Content Creators. YouTube beginner tool for unboxing video, broadcast, video recording, photography.. Wide Compatibility Both the tripod head and clip arm head are universal 14 threaded, compatible with all iPhone, Logitech webcam Brio 4K, C930e, C920, C920s, C922, C922x, C615 etc You can diy combine them in different way to meet different needs.

Built-in 14 threaded and Turntable included that could be rotated 360 degree fits for all 14 screw web cameras, like Webcam C925e C922x C922 C930e C930 C920 C615, Hero 8765, UltraProPro 2Pro 3,StramCam, DSLR Camera, Action Camera, Ring Light and other universal 14 screw devices.. Specification Max. Height 22 inches56 centimeters which could be rotated 360 degrees Load Capacity 1.76 pounds0.8 kilograms.. High quality Sturdy all-metal structure camera support arm, with anti-rust treatment on the surface, high reliability. Double-support solid arm and double thick suspension spring, can prevent the camera from falling off, high stability, high durability.. Folding type, convenient to carry. The adjustable arms allow you to carry it with you easily and adjust the suitable angle and height.. Package Content Turntable, Arm Stand, Round Support Base, User Manual..

Want To Adjust The Distance Of The Phone Holder--This stand features a 33.46 85 cm flexible telescopic arm that rotates 360 degrees, allowing you to loosen your hands, reduce neck fatigue and easily position your phone at the desired distance. Ideal Valentine's gifts choose. Is It Suitable For Your Mobile Phone--Compatible with cell phones screen from 4.0 to 6.3 inches. The height of the fixed section can be adjusted from 0 to 2.75 inch7cm.. Is The Arm Easy To Fracture--Our cell phone holder arm is made of 8.5mm Aluminum Alloy, it is hard to fracture, please rest assured to buy Any questions about this phone holder, please contact us immediately, we will give you the most satisfactory solutions.. This Phone Clip Damage The Furniture--Our handy phone holder for recording can be used at a small table, your bed frame or even a desk Designed with an anti-slip silicone base, the holder will not cause damage to your furniture.. 24 Hours Customer Service - Any question about SAIJI cell phone stand, please contact us via E-mail first time. We have a replacement with 12 months and professional customer service support.. In order to ensure the stability of the product, we use a more solid metal tube, when adjusting the need to add a relatively large force, if you are not convenient to adjust, please be careful to buy.

Compact and Easy to Store The SIRUI Aluminum Travel Camera Tripod AM-TT50 is a perfect tabletop tripod suitable for small DSLR cameras, mirrorless cameras, smartphones, action cameras, and other devices. Its foldable aluminum legs design facilitate compact storage, with a folded length of only 7in18cm and a weight of less than 1.7lbs0.8kg Please Scan the QR Code on the Packaging to Access the User Manual. Smooth Adjustment This small camera tripod features a 5-section leg design and quick tightening mechanisms, allowing for quick and easy height adjustment and locking to accommodate your shooting needs. The table tripod's minimum working height is 7, and its maximum height reaches 20. Versatile Shooting Angles The tripod provides complete flexibility in angle adjustments with a quick angle adjustment lever offering 3 options 103668 relative to the horizontal plane. Additionally, its detachable center column can be reversed to capture shots at lower angles effectively. 360Panoramic Ball Head The desk tripod kit includes a quick release plate for ARCA Aluminum ball head, allowing for 360-degree panoramic movement. It features a U-shaped notch for vertical shooting scenes, enabling you to capture shots from any angle, whether horizontal or vertical. The portable tripod for camera's maximum load capacity is 17.64lbs. Expandability and High Craftsmanship The travel camera tripod features a 14 threaded hole compatible with accessories like magic arms, allowing for the attachment of microphones, monitors, LED lights, and other devices. Additionally, the bottom of the central column is equipped with a 38 threaded hole for installing accessories such as a counterweight hook The compact tripod is made with precision CNC cutting and durable surface oxidation paint for longevity..

Longer, More Flexible Magic ArmThis 56cm22 arm is much longer than typical gear magic arms, load capacity 600g21oz. Each joint features double-ball clamps for independent angle adjustments, ideal accessory for overhead shooting, live streaming, vlog, stop motion video, and video conferencing.. Anti-Deflection Design for Enhanced StabilityThe magic arm securely connects to the super clamp via an anti-deflection 14-20 interface, enhancing stability and security. It stays secure even if accidentally bumped. Perfect for content creators, vloggers, streamers, photographers, remote workers, and anyone needing a versatile mounting solution for professional or personal use.. 12 Anti-slip and Anti-scratch DesignsSilicone pads and rubber rings inside the clamp, on six balls, and at both ends of the magic arm. These enhancements increase friction for a tighter grip on equipment while protecting it from scratches. Versatile ClampThe crab clamp can open up to 63.5mm and features rotatable friction pads, opening 50 mm, suitable for clamping onto regular desktops as well as round tubes like tripods, stabilizer handles, and more.. Compatible with Multiple DevicesInclude 2 standard 14-20 screws, a 14-20 to 38-16 adapter, a phone clamp compatible with phones ranging from 7-10cm in width, for iPhone 161514 Pro Max Plus, for Samsung Galaxy S24S23S22, compatible with some microphones, suitable for vlog camera, webcams, lights, action cameras, monitor, and more.. NoteThe entire kit is made of aluminum alloy, recommended load capacity 600g21oz. Any inquiries will be responded to within 24 hours, and we offer a two-year after-sales service..

Stable Triangular Structure - The first desktop camera stand featuring a triangular stable support structure. The horizontal and vertical rods are reinforced by an auxiliary support rod to form a stable triangular structure to improve shooting stability. The load-bearing capacity of up to 3kg provides higher stability.. Compatible Devices - The small ball head has a 14-20 screw and can be used with cameras, action cameras, webcams, and other devices for multi-angle shooting. Also includes a phone holder, making it compatible with your cell phone.. Fits up to 7cm Thick Desk - The C-clip can be clamped on a desktop up to 7cm thick and is suitable for most tables. Suitable for live broadcasts, Vlog short video shooting, product unboxing, beauty, food, selfies, and other scenes.. Adjustable Angle - The horizontal rod has 2 adjustable sections, with a length of 42cm-68.5cm. And the auxiliary support rod is locked via 2 non-fixed locking knobs, more flexible shooting angle selection, and no blind spots for indoor desktop shooting.. Multi-joint Locking - Multiple wider and thicker locking knobs for easier locking and greater stability..

1080p full hd webcam, 1080p web camera specifically designed for professional quality video calling, recording, conferencing, gaming. computer camera with full hd glass lens deliver crisp image and crystal clear video at a fluid 30 frames per sec. equipped with automatic light correction and hdr technology, pro streaming webcam auto adjusts color and brightness for natural lighting so you always look your beautiful on web camera even in dim or poorly backlit. Easy to set up and tripod ready clip, usb webcam camera can be easily install and use, plug and play, no additional driver required. it also features a tripod ready adjustable universal clip with 1.8m 6 feet usb power cable that fits to laptops, desktops, computers, mac, pc, lcd monitors meet your multi angle needs. 110 degree widescreen webcam with mic,this camera built in digital stereo microphone with automatic noise reduction, which makes the sound purer and clearer, pick up your voice even at 10ft distance. fixed focus laptop desktop webcam captures high def video at a wide angle up to 110 degrees, perfect for live streaming, webinars, video conferencing, etc. Advanced technology and wide application, 1080p full hd camera with facial enhancement technology optimizes the image automatically, which makes you look great in recording, video calling, online teaching, gaming. pc webcam widely works with windows 2000, xp, 7, 8, 10 and above, mac os, chrome os, smart tv, android etc, compatible with skype, obs, youtube, facebook, twitch, facetime, , xbox one, hangouts and more. Webcam with privacy cover and tripod stand , we will provide a privacy cover and tripod stand for you. pc webcam with privacy cover allows you to enjoy safe digital web life when not in use and prevent hackers from spying on you.to control what your video displays at any time, effectively protecting your privacy. the webcam comes with a tripod, convenient for you to place the computer camera.

Ultra-Flexible Overhead Desk Ring Light -This ring light delivers soft, even lighting that flatters your subject and eliminates harsh shadows. The ultra-flexible arm tilts, swivels, and extends in secondsideal for video recording, photography, livestreams, and content creation. Versatile Lighting for Photos Videos -This overhead camera mount ring light with stand features 3 color modes Warm, Natural, Cool and 10 brightness levels for eachgiving you 30 total options to match any setting. A high CRI 95 ensures vibrant, true-to-life color for food, crafts, and skin tones. Whether you're filming a cooking tutorial or product showcase, your content always looks professional. Portable and Useful Overhead Phone Mount -Doubles as a phone stand for recording, perfect for hands-free top-down content. The 30-inch arm extends smoothly to your desired length and holds your device firmly in place. This ring light with stand Great for overhead shots, step-by-step recordings, or live tutorials.. Stable Compact Clamp Design -The upgraded dual-spring metal arm adjusts smoothly and stays locked in place. The sturdy lamp head stays steady, even during long shoots. A strong desk clamp fits surfaces up to 2.4 thickno slipping, no wobbling. Ideal for tight workspaces. Built with aluminum alloy and ABS for durability.. Whats in the Box -Youll get 1 ring light, 1 cantilever arm, 1 desk clamp, 1 I-clip for phone, 2 cable clips, and user manual. Easy setup in minutes. Note USB-powered. For optimal brightness, use a 10W or higher power adapter not included..

Uniform and Soft Illumination LitONES desk video conference light utilizes advanced edge-lit technology, delivering even and gentle lighting perfect for Zoom meetings, video recording, remote working, home office, learning, reading, content creation. This design eliminates harsh glare, ensuring a high-quality, comfortable light source that reduces eye strain and makes you look natural during video calls, online teaching, and live streaming, shooting projects .. Perfect Lighting The zoom meeting light integrates side-illuminated LED technology and high CRI of 97.8, delivering high-quality, soft illumination that renders vibrant, true-to-life colors on video. This desktop lamp offers 3 adjustable color temperatures and 10 brightness levels 3000K-6500K, allowing you to customize your lighting for a wide range of scenarios such as video calls, podcast, makeup, recording, photo shooting, Instagram, TikTok from professional zoom calls to live streaming.. Ergonomically Design This stylish 7-inch full-screen webcam light features a sturdy metal base to ensure durability. The metal base comes with a non-slip pad for superior stability, slip resistance and scratch resistance to protect your desktop surface. The height of the desktop zoom light is ergonomically designed and adjustable from 22 inches to 32.5 inches. No matter what office configuration, you can find the most comfortable height easily to reduce glare and fatigue. Flexible and Space-Saving The webcam light head offers 360 omni-directional rotation, allowing you to adjust it back and forth, left and right, or up and down for perfect illumination. Ideal conferencing fill light behind or next to your laptop or monitor, it also as study or reading lamp. Equipped with a universal 360 rotating phone holder, its perfect for video chatting or recording. Powered by 10W USB supply 5V2A, it's versatile and compact for outdoor picnic or camping.. Versatile Desk Lamp for Home Office Combining style and functionality, this desk ring light enhances your video conferencing, Zoom meetings, and video calls by brightening your image presentations. It's ideal for remote work, office setups, study areas, video recording, live streaming, makeup, selfie, Instagram, logging, gaming and any scenario requiring enhanced lighting. Committed to delivering the best zoom lighting, we offer a 3-year after-sales service for your peace of mind..

DSLR desk mount stand with standard 14 screw can be mounted for the most cameras and lights which have a 14 adapter, such as ring light, DSLR camera, video camera, panel light, key light, webcam, Elgato Master Mount accessories.. Camera desk mount stand 14.5-37.7 inch adjustable. Gives you ample height for overhead shooting and lighting. Universal desktop light stand, 1.96 inch clip distance, compatible with most desk.. Desk clamp stand have removable ball head with an industry-standard 14 Screw allows you to expand your rig.. Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying.. NOTE Webcam, Panel light, Ring light, DSLR camera Not included..

3-Section steel monopod extendable from 55 Centimetre 22 inch. Up to 125 Centimetre 49 inch. Gives you ample height for overhead shorts and lighting.. Center ball head with an industry-standard 14 Screw allows you to expand your rig.. Padded desk clamp expandable upto 6 Centimetre 2.35 inch. Provides maximum stability.. Rubber twist locks and levered clamps enable easy adjustability.. Compatible with all Elgato Master Mount accessories..

Excellent Stability Equipped with 4 non-slip pieces of cotton on the bottom of the metallic base to keep Puroma webcam stand in place, avoiding leaving some nasty scratches or Creating unpleasant noise.. Durable Made of premium metal material offers longer life for daily use, it also can be extended up to approximately 21inches53cm by adding the goose-neck arm for a suitable angle and height.. Adjustable 38-14 screw thread and the steel ball head make the tripod head can be rotated 360horizontally and 140vertically easily, you can swivel and bend it any way you want for the best shooting range.. Versatile Suitable for Logitech Webcam C920 C920S C922x C615 BRIO C930e C922 with standard 14 screw hole. The ideal choice for home, video recording, broadcasting and podcast.. Package Contain 1 x Puroma Webcam Stand,?1 x Goose-neck,?1 x Tripod Head, provides you a comfortable environment for chatting, interacting with others or recording the real-life..