USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve if applicable, oil baffles and slingers if applicable. Complete Installation Kit.

DANA 44 03-06 JEEP TJ Rubicon. Overall Lengths 16.62 L 31.88 R 6.11 Stub. Inside Spline 30 Outside Spline 27. Finished Coating Black Oxide Material 4340 Chromalloy. U-joint Spicer 5-760X.

Manufactured from high-strength 4340 chromoly steel for enhanced durability and performance in off-road and heavy-duty applications.. Features a 27-spline outer shaft design with 8.72 length and 5-760X U-joint compatibility for Dana 30 and Dana 44 axles.. Finished in corrosion-resistant black oxide coating to ensure long-lasting protection in harsh environments.. Includes one outer front axle shaft, usable on both Left Driver and Right Passenger sides universal fit for multiple Dana 3044 setups.. Direct replacement for OE part numbers Spicer 10007764 10007804, Alloy USA 10128, and others backed by a 1-year manufacturer warranty..

The TEN Factory MG20140B is a high-performance outer axle shaft designed for Dana 44 JK Reverse axles on 20072018 Jeep Wranglers, ideal for off-road applications.. Manufactured from premium 4340 chromoly steel, this shaft delivers superior strength and durability over stock components.. Features 32 outboard splines, 6.3-inch shaft length, and is compatible with 1350 WJ U-joints using 5-7166X joints.. Corrosion-resistant black oxide finish provides enhanced protection and longevity under harsh terrain and trail conditions.. Backed by a 1-year limited warranty, this shaft fits both left driver and right passenger sides for simplified replacement..

Fits 20072018 Jeep Wrangler JK non-Rubicon designed for Dana 44 rear differentials high-strength upgrade over factory axles.. Kit Includes Axle Length 31.89 5 x 5 And 5 x 5.5 Lug Pattern 30 Spline Includes Left And Right Axles, ABS Rings, Bearings, Seals And Wheel Studs 4140 Chromoly Excludes Rubicon And Unlimited Rubicon. Features 30-spline inboard shafts measures 31.89 inches in length supports dual bolt patterns 5 x 5 and 5 x 5.5 for enhanced versatility.. Built from premium 4140 Chromoly steel with black oxide coating includes ABS rings, seals, bearings, and pre-installed wheel studs.. Delivers improved durability and torque capacity for off-road and modified Jeep builds ideal for Jeep JK daily drivers and weekend crawlers. Categorized under LD Differential Axle Shafts Axle Kits - Rear Chromoly Left and Right backed by TEN Factory's 1-Year Limited Warranty..

High-strength 4140 chromoly axle shafts with 32-spline count provide superior off-road durability and performance for Dana 44 JK axles.. Includes both left 31.18 and right 32.54 rear axle shafts, wheel studs, ABS rings, bearings, and seals for a complete bolt-in solution.. Dual bolt pattern design supports both 5 x 5 and 5 x 5.5 lug patterns, enhancing versatility with aftermarket wheel setups.. Black oxide finish provides corrosion resistance and a professional appearance, ideal for long-term performance in rugged terrain.. Backed by a 1-year manufacturer warranty replaces G2 96-2052-3-32, Revolution DC-JK-RUBICON, and RAK51 for seamless OE-level fitment..

Heavy-duty axle upgrade for Dana 44 Standard front axles. Includes left 46.07 and right 28.44 assemblies with 30 spline inner shafts and 19 spline outers, finished in black oxide for enhanced corrosion resistance.. Constructed from 4340 Chromoly steel for superior off-road durability and street performance. Each axle uses 1310 WJ 5-760X universal joints for reliable articulation.. Axle specs Inner shaft lengths 36.13 L, 18.50 R Outer shaft length 9.94 outer spline 19 shaft material 4340 chromoly universal joint 1310 WJ series.. For Dana 44 Performance Front Axle Kit Axle Length 46.07 Left Side 28.44 Right Side 30 Spline Inner Shafts Uses 5-760X U-Joint Includes Left And Right Assemblies 4340 Chromoly.. Replaces Alloy USA 12172, Nitro Gear Axle AXN24150, Revolution DC-D44-GM, Yukon YA W24150, USA Standard ZA W24150. Perfect OE upgrade for 19731978 ChevyGMC 4x4 trucks and SUVs..

Great Compatibility Perfectly fit for Jeep JK, JKU, TJ, LJ, XJ, YJ Dana 30 and Dana 44 front axles. For Jeep Wrangler 2-Door 4-Door JKJKU 2007-2018 For Jeep Wrangler YJ 1987-1995 For Jeep TJ 1997-2006 For Jeep LJ 2004-2006 For Jeep Cherokee XJ 1984-2001 For Jeep Grand Cherokee 1993-2001 NOT FIT vacuum disconnect axles or CV axles. The installation tool also fits for Dana 30, 44 and 60 Front Differentials.. Perfect Design Each part is manufactured to OEM specifications and testing. Designed to safely and evenly apply pressure to the inner axle seal, pressing it into the axle housing to the proper depth without damaging your seal or axle. Features 3 O-ring seals on the outer and 2 washer seals on the inner to provide double protection and a perfect barrier. Keep water, mud and debris from entering your front axle housing to nsure reliable sealing and no leakage to save your time and money.. Superior Quality Premium grade CNC machined aircraft grade billet aluminum with red anodized finish, and heavy duty steel install tool with zinc black electroplated, strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation, high and low temperature resistance, built to withstand tough conditions for optimal performance and long-lasting reliability.. Easy To Install No damage to your car. Easy and quick installation about 10-15 minutes. Remove the front tire, brakes, and axle, clean the tube and then press the axle tube seal into the housing. Do Not Drive Vehicle Until Silicone Has Cured..

FITMENT Designed for Dana 30 44 60 front differentials.. EASY TO USE Simplify the process of removal and installation the axle Seal.. COMPATIBILITY -- The inner axle side seal installation tool compatible with Dodge axle seal installer, Chevy axle seal installer, Ford axle seal installer, Jeep axle seal installer, GMC axle seal installer, Volvo axle seal installer, Jaguar axle seal installer and so on.. HIGH QUALITY Made of electroplated heavy duty steel,CNC machined.it is sturdy and stable,anti-corrosion,High precision and Not easily deformed for long life service..

4340 Chromoly. Limited Lifetime Warranty. Ships Fully Assembled. Stock Replacement Axle Shafts. Fits Aussie Locker and TORQ Locker.

Heavy-duty outer front axle shaft designed for Dana 30 and Dana 44 differentials in Jeep TJ and Wrangler models.. Compact 6.11 shaft length with 30-spline outboard design ensures secure fitment and smooth operation.. Constructed from premium 4340 chromoly steel with a black oxide finish for superior strength and corrosion resistance.. Compatible with 1310 WJ series U-joints uses 5-760X for reliable performance under extreme conditions.. Backed by TEN Factorys 1-Year warranty, trusted for off-road durability and long-lasting drivetrain components..

Specialized Tool This tool is designed for installing inner axle side seals on Dana 304460 axles and front differentials.. Thrust Bearing Compatibility It is compatible with thrust bearings, ensuring a proper fit and installation.. Durable Construction Crafted from high-quality materials, this tool is built to withstand the rigors of automotive repair tasks.. Efficient Installation Streamlines the process of replacing inner axle side seals, saving time and effort.. Professional Grade Designed for professional mechanics and automotive enthusiasts alike, ensuring reliable performance..

Great Compatibility Works on Dana 30, 44 and 60 front differentials. Please refer to the model in the product description list below the page. Upgrade Design Designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal.. Special Features The different inner and outer diameters of the puck part of the tool press on many different seals. More efficient and durable to save your time and money.. Superior Quality Advanced CNC machined heavy duty steel with zinc black electroplated, durability, strong and anti-corrosion. High precision and hardness to provide a much longer service life.. 100 Satisfaction Guarantee If you're not 100 satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

Great Compatibility Perfectly fit for Dana 30, 44 and 60 Front Differentials. Widely compatible with Jeep, Dodge, Ford, GMC, Chevrolet, Volvo, Isuzu, Jaguar, Plymouth, International, Mercury and more models Please refer to the models in the product description list below the page.. Perfect Design Designed to safely and evenly apply pressure to the inner axle seal, pressing it into the axle housing to the proper depth without damaging your seal or axle. Come with blow-molded case for protection and storage.. Special Features The different inner and outer diameters of the puck part of the tool press on many different seals. More efficient, safer and easier installation of the inner front axles to ensure reliable sealing and no leakage to save your time and money.. Superior Quality Premium grade CNC machined heavy duty steel with zinc black electroplated, strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation. High precision and hardness to provide a much longer service life.. 100 Satisfaction Guarantee If you're not 100 satisfied with our items, simply return it for refund within 30 days. Support 12-month Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

Built for Dana 44 JK Reverse differential in 20072018 Jeep Wrangler Rubicon full front chromoly axle shaft kit includes left and right assemblies for superior strength and performance.. Features 30-spline inner shafts with lengths of 26.06 Left and 39.83 Right 32-spline outboard forged from 4340 chromoly and finished in black oxide for enhanced durability.. Designed for use with 5-7166X U-joint and 1350 WJ series joints ensures high articulation and torque load handling engineered for off-road abuse and trail reliability.. Taxonomy A LD Differential B Axle Shafts C Axle Kits - Front Chromoly D Left and Right fits Dana 44 JK Reverse axles upgraded spline counts improve torque transfer.. Includes two axle shafts, U-joint compatible 1-Year Limited Warranty ideal upgrade for Rubicon owners seeking reinforced strength and off-road dependability..

HIGH PERFORMANCE All Parts Of The Inner Axle Side Seal Installation Tool Are Made Of CNC Machined Heavy Steel, And Are Electroplated With Zinc Black, Which Is Durable And Will Never Rust. High Precision And High Hardness Can Extend The Service Life. Ensure That The Manufacture Of Each Part Meets The Required Specifications.. BROAD COMPATIBILITYThe Inner Axle Side Seal Installation Tool Compatible With Dana 30 Dana 44 Dana 60 Axle Front Differential .This Tool Can Help You Quickly Complete Repairs, Repairs Or Upgrades Of The Inner Shaft Side Seals.. UPGRADE DESIGNThe Inner Axle Side Seal Installation Tool Equipped With A Thrust Bearing Instead Of A Flat Washer Sleeve. The Customized Flange Nut Does Not Need To Worry About The Wrench Falling Off During The Installation Process.Simplify The Process When Install The Axle Seal. Great Time Saver The Way SaferEasier To Use Than The Old Punch And HammerAll Parts Are Upgarded, You Will See, Excellent Value. EASY INSTALLATION Attach The Sealing Ring To One Side Or The Other Side Of The Hockey Puck The Hockey Puck Is Designed To Grab A Variety Of Different Sealing Rings. Lean The Other End Against The Other Side Of The Differential And Apply Pressure Evenly To The Inner Shaft Seal To Press It Into The Shaft Box Without Damaging The Seal. AFTER-SALES SERVICEEstablish Strict Quality Control Standards, Buy With ConfidenceIf You Have Any Questions About Inner Axle Side Seal Installation Tool ,Please Contact Us, We Will Help You Solve It As Soon As Possible.

Replacement for 1994-2001 1500 1994-1997 2500. Improving traction and lessening breakage. The transmission shaft has good performance, which can effectively reduce noise, provide you with a comfortable driving environment and enjoy a good time. Strict inspection ensures high quality, durability and reliability under extreme conditions. If you have any questions, please feel free to contact us.

Engineered for Dana 44 Standard Differentials Features a 9.94 chromoly outer shaft with 19 splines and 4340 chromoly construction for enhanced strength and off-road durability.. Compatible with 5-760X U-Joints Utilizes a 1310 WJ series U-joint, ensuring direct OE fitment for both driver and passenger sides.. Direct OE Replacement Replaces factory outer axle shafts for a wide range of Chevy, GMC, and Jeep models from 19601993.. Precision-Built and Finished Black oxide coating protects against corrosion and wear ideal for heavy-duty and performance applications.. Whats in the Box Includes 1 outer front axle shaft fits left driver or right passenger side backed by a 1-Year Manufacturer Warranty..

Great Compatibility Perfectly fit for Jeep JK, JKU, TJ, LJ, XJ, YJ Dana 30 and Dana 44 front axles. For Jeep Wrangler 2-Door 4-Door JKJKU 2007-2018 For Jeep Wrangler YJ 1987-1995 For Jeep TJ 1997-2006 For Jeep LJ 2004-2006 For Jeep Cherokee XJ 1984-2001 For Jeep Grand Cherokee 1993-2001 NOT FIT vacuum disconnect axles or CV axles. The installation tool also fits for Dana 30, 44 and 60 Front Differentials.. Perfect Design Each part is manufactured to OEM specifications and testing. Designed to safely and evenly apply pressure to the inner axle seal, pressing it into the axle housing to the proper depth without damaging your seal or axle. Features 3 O-ring seals on the outer and 2 washer seals on the inner to provide double protection and a perfect barrier. Keep water, mud and debris from entering your front axle housing to nsure reliable sealing and no leakage to save your time and money.. Superior Quality Premium grade CNC machined aircraft grade billet aluminum with red anodized finish, and heavy duty steel install tool with zinc black electroplated, strength and durability, anti-corrosion and anti-rust, anti-impact and anti-deformation, high and low temperature resistance, built to withstand tough conditions for optimal performance and long-lasting reliability.. Easy To Install No damage to your car. Easy and quick installation about 10-15 minutes. Remove the front tire, brakes, and axle, clean the tube and then press the axle tube seal into the housing. Do Not Drive Vehicle Until Silicone Has Cured.. 100 Satisfaction Guarantee If you're not 100 satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

Axle Seals Installer For Dana AxlesFit For DodgeJeepRamChrysler 4x4 truck vehicle models. Suitable for Dana 44 and for Dana 60 front axles.For stuck the front axle seal into the disconnect axle small cavity.. Compatibility NoteNot compatible with AAM 9-14 front axles or 14-bolt rear axles. Please verify your axle type before purchase.. Prevent Damage Save TimeSpecific tool prepared for installing axle seals accurately into the axle tube cavity, ensuring proper depth and alignment for reliable sealing performance. Eliminates the need for improvised tools and hammering, helping prevent seal damage and reducing installation time.. Complete Tool KitIncludes installer, forcing screw rod, and multiple disc adapters for versatile applications across Dana front axles. Package includes 5041-1 Installer, 5041-2 Forcing Screw rod, 5041-3 Disc Adapter, and instructions.. Spare garage toolA multifunctional use disconnect axle repair long rod tool, also works with ST-234 8409, 8411, 8415, 8416, 8417A 8834 inner axle seal adapters for Dana front axles, more models..

FOR Front or Rear Dana 44 ReverseDana 44 Standard Verify part specifications before purchasing. INCLUDED QUALITY COMPONENTS 38 Ring Gear Bolts Master Bearing Kit Includes Koyo Tapered Bearings Carrier, Front And Rear Pinion, Pilot Where Applicable, Brush, Cover Gasket Or RTV, Crush Sleeve Or Preload Shim Pack, Marking Compound. UNLEASH YOUR BEAST Motive Gear differential bearing and seal kits reduce friction to ensure your gears and axles rotate smoothly. Long lasting components restore your differentials performance, ensuring a smooth and quiet operation.. ENHANCED PERFORMANCE Our kits are designed to handle the toughest shock load in racing applications.. TRUSTED BRAND Manufactured by Motive Gear, a leader in automotive differential parts and accessories..

Use With Dana 44 Axles Only Designed specifically to fit Dana 44 spindle nuts found on select GM, Dodge, Ford, and GMC vehicles. Does NOT fit Ford Super Duty or vehicles equipped with Dana 60 or other axle types. Please verify axle type before purchase.. Utilization If you are looking to remove a lug nut, this Ford spindle socket is right for you Our lug nut spindle sockets install wheel bearing retaining nuts on 12 ton vehicles with manual locking hubs Get the job done easily with this OEM tool. Maximum Grip Wheel bearing retaining nuts can be a pain to remove, so we have designed our Ford spindle nut socket to make the job easy The four lugs positioned at the top of the socket provide maximum strength and grip Never worry about this wheel wrench slipping. Built to Last Working with retaining nuts can put your sockets in a tough environment, but the environment is no match for our sockets Our Dana 44 tool is composed of chrome vanadium steel and a black oxide finish to provide strength and rust resistance. Essential Car Tool A flat tire can happen anywhere That is why you always need axle nuts tools handy for emergency tire replacement With this 4WD Ford axle nut tool, you can complete the job quickly and get back on the road in a snap.

Axle Length 9.72 Axle Spline 19. Position Front Right Outer Lug Pattern NULL. 4340 Chromoly. Motive Gear Replacement Axle Shafts are made from quality materials and heat treated for strength and durability.

Fits 1976-1991 GM 12 ton front, 1973-1980 GM 34 ton front, and 1985-1993 Dodge 12 ton front. 6 bolt holes. 2.00 and 1.625 bearing journals.

Great Compatibility Fits for Dana 44 axles. Does Not fit Dana 44A, 44HD, 44226 or Nissan Titan.. Perfect Design The elastomer bead provides an excellent, dry and leak-free seal, even when exposed to high horsepower, differential and axle flex or wide temperature extremes. Provides you clean differentials with no oil seepage and prevents damage to your vehicle critical components.. Superior Quality Premium grade steel core construction with rubber coating and has full perimeter elastomer beading on both sides of gasket, strength and durability, anti-corrosion, impact resistance and aging resistance for long-lasting reliability and gasket life.. Easier Work No Sealant Required Will not split or extrude during installation and has superior torque retention so that there is no sticking to the housing, helps release during disassembly.. 100 Satisfaction Guarantee If you're not 100 satisfied with our items, simply return it for refund within 30 days. Support 12-month Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

Rear right axle shaft compatible with Dana SUPER 44 with Electronic Locking Differential. Spline Count 32 Inboard. Axle Length Inches 32.54. Bolt Pattern 5 X 5.00. Includes tone ring.

APPLICATION -- This tool will work on Dana 30,44 and 60 front and rear differentials found on for Chevrolet, Dodge, Ford, GMC, International Scout, Jaguar, Isuzu Rodeo, Jeep, Mercury Mariner, Volvo and some other applications as well.. FUNCTION -- Helps install inner front axles seal to the proper depth. Specially designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal.. UPGRADE DESIGN -- The different inner and outer size of the puck suitable to press on many different seals. Customized nut-full doesnt need to worry about the wrench falling off during the installation process. A must have for replace broken or bad Inner Axle Side Seal.. EASY INSTALLATION -- Hassle-free installation.1. Place the seal into the differential axle tube, aligning puck with the seal and the flat end of the bolt 2. Tighten the nut with a wrench until the seal is properly seated 3. Remove the tool and the seal is installed. Do the same to the other side.. TOP QUALITY -- Manufactured from quality steel for long tool life. Long lasting durability zinc black coating used on tool to protect them from all the dirt, oil, and grease that could potentially break down the socket quality. Corrosion-resistant, wear-resistant, and rust-resistant.. SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full-refund in 30 days. Guarantee with 12 months warranty. No worry about buying.

Preventing Leakage Gaskets are designed with a steel core that is rubber coated and have elastomer beading on both sides. This design effectively prevents gear oil leaks from inside the differential.. Preventing Contamination This gasket acts as a protective barrier, effectively isolating external contaminants such as dust, moisture, and debris. This critical function prevents pollutants from compromising the gear oil, thereby reducing wear on gears and bearings.. Simplify Installation Gasket installs dry and no sealant needed. This design prevents sealant from remaining on the surface of the housing, and the non-stick surface ensures easy disassembly.. Anti-Squeeze Groove Design Its anti-squeeze groove maintains structural stability during the bolt tightening process and can be reused.. NOTE Doesn't compatible with Dana 44HD, 44A, Nissan 44, or Nissan Titan Please make sure your vehicle uses Dana 44 axles drivetrain before buying..

APPLICATION -- This tool will work on Dana 30,44 and 60 front and rear differentials found on for Chevrolet, Dodge, Ford, GMC, International Scout, Jaguar, Isuzu Rodeo, Jeep, Mercury Mariner, Volvo and some other applications as well.. PACKAGE CONTENT -- 1 Inner Axle Side Seal Installation Tool, 1 Molded Storage Case.. FUNCTION -- Helps install inner front axles seal to the proper depth. Specially designed to safely and evenly apply pressure to the inner axle seal to press it into the axle housing without damaging the seal.. UPGRADE DESIGN -- The different inner and outer size of the puck suitable to press on many different seals. Customized nut-full doesnt need to worry about the wrench falling off during the installation process. A must have for replace broken or bad Inner Axle Side Seal.. EASY INSTALLATION -- Hassle-free installation.1. Place the seal into the differential axle tube, aligning puck with the seal and the flat end of the bolt 2. Tighten the nut with a wrench until the seal is properly seated 3. Remove the tool and the seal is installed. Do the same to the other side.. TOP QUALITY -- Manufactured from quality steel for long tool life. Long lasting durability zinc black coating used on tool to protect them from all the dirt, oil, and grease that could potentially break down the socket quality. Corrosion-resistant, wear-resistant, and rust-resistant.. SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full-refund in 30 days. Guarantee with 12 months warranty. No worry about buying.

Fits Jeep XJ and YJ with reverse rotation Dana Spicer 30 front and Chrysler 8. 25 rear. 4. 56 ratio. Includes front and rear ring pinion sets and master overhaul kits. Includes Marking Compound and Locktite. 1 Year Warranty. Yukon Gear and Install Kit package for Jeep TJ with Dana 30 front and Dana 44 rear, 4.88 ratio. This is a complete package that includes front and rear ring and pinion sets along with the most complete master overhaul kits on the market, giving you everything you need to re-gear the front and rear differential in one easy part number.

Fits Jeep TJ with Dana Spicer 30 front and Dana Spicer 44 rear. 4.56 ratio. Includes front and rear ring pinion sets and master overhaul kits.

Fits 1993-1994 Ford Bronco and F150 with Dana Spicer 44 IFS. This spindle is not compatible with ABS applications.

6.25 tall. Fits 1975-1979 Ford F150 and F250 with reverse rotation Dana Spicer 44 front. 2.000 and 1.625 bearing journals. 5 bolt holes. 6.125 flange.

Genuine OE replacement. Package Weight 1.12 kilograms. Package Dimensions 19.0 H x 13.1 L x 13.6 W centimetres. Country of Origin Mexico.

Dana 30 front left axle shaft. Inner Shaft Spline Count 27 Outer Stub Spline Count 27. Universal Joint Series 1310. Overall Assembled Length Inches 22.680. Fits select Jeep applications. Spicer genuine OE replacement. 1984 - 2002 Jeep Wrangler and Jeep Cherokee Dana 30 front, left axle.

Dana 30 front right axle shaft assembly. Inner Shaft Spline Count 27 Outer Stub Spline Count 27. Universal Joint Series 1310. Overall Assembled Length Inches 38.520. Fits select Jeep applications. Spicer genuine OE replacement. 1984 - 2002 Jeep Wrangler and Jeep Cherokee Dana 30 front, right axle.

USA Standard 4340 Chrome-Moly replacement axle kit for Jeep TJ Rubicon, Dana 44.

USA Standard ring and pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring and pinion sets for a variety of common and hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring and pinion sets. This product is used in a 4.88 axle ratio.

High Strength Iron Case. Precision Machined for Tight Tolerances. Does Not Include Spider Gears.

Fits front rear Dana 44 differentials. 5.13 gear ratio. 24 spline pinion gears, thick ring gear. Front rear Master Overhaul installation kits. Front rear nodular iron Yukon Hardcore Diff Covers.

Does not fit Rubicon Recon w Dana 44 front axle w 38 wall. Long side and short inner axle sleeves included. INSTALL TIME 4 Hours Sleeve Kit. Fit type Vehicle Specific.

Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, oil baffles and slingers, marking compound and brush. Timken bearings and races, high quality seals and small parts, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker. Carrier bearings races, pinion bearings races, pinion seal, axle seals, complete shim kit. Estimated bore diameter 30mm to 60mm, compatible with Dana Spicer 44 JK Rubicon.

Wrangler Rubicon Front Axle Housing Assembly, Dana 44, 4.10 3.73 Front Axle Ratio. OE Part 68017174AC, 68017174AD, 68017174AA, 68017169AD, 68017169AC, 68017169AB. Replacement for 2007-2015 Jeep Wrangler Rubicon 3.6L 3.8L. Made of high-quality steel with high rigidity, the surface undergoes anti-rust treatment, exhibiting excellent wear resistance, impact resistance, and resistance to metal fatigue, ensuring long-lasting durability.. Warranty for 12 months.

1. Perfect Compatibility Directly replaces part number 68304271AA. Designed to fit the front axle systems of the Jeep Wrangler JK, JKU, and TJ models 2013, 2014, 2015, 2016, 2017, and 2018. Fits Rubicon Dana 44 and Dana 30. 2. Strong Sealing Protection Designed to prevent lubricant loss and block external debris, it keeps the drivetrain clean and lubricated, preventing mechanical wear and failure caused by loss. 3. High-Quality, Durable Materials Constructed from high-grade sealing material with a brown zinc coating, it significantly enhances rust, corrosion, and wear resistance, ensuring long-term, stable operation in complex road conditions and harsh environments. 4. Custom Design Each seal is crafted to exact vehicle specifications, ensuring a tight fit and a high degree of fit, effectively ensuring optimal drivetrain performance and reliability. 5. Convenient and Time-Saving Installation 2 The kit design meets the needs of replacing front and rear wheels or left and right wheels. The installation steps are simple and easy to understand, and replacement can be completed quickly without professional tools.

Fits 1978 Bronco and 1973-1979 F150. 6.00 flange. 5 bolt holes. 1.78 and 1.625 bearing journals.

Fits Dodge Dana Spicer 44 This front spindle fits Dodge vehicles with Dana Spicer 44 from 1985 to 1993. Quality tested Performance parts and accessories from Yukon Gear and Axle are quality tested for maximum durability. Engineered for durability This front spindle is engineered for maximum durability. Item type This is a front spindle for your vehicle.

Designed for Dana 44 standard rear axles in Jeep Wrangler YJ, TJ, and Cherokee XJ from 19872006 fits left and right side.. Engineered with 30 inboard splines, axle lengths 29.25 left and 29.75 right, black oxide finish for corrosion resistance.. Built from 4140 Chromoly for extreme durability and strength, perfect for off-road and performance use.. Features dual bolt circle 5 x 4.5 and 5 x 5.5 bolt patterns includes wheel studs, seals, and bearings.. Categorized under LD Differential Axle Shafts Axle Kits - Rear Chromoly Left and Right includes 1-Year Limited Warranty..

High Quality Bearings and Seals. Includes Installation Guide. Services One Side Only. Yukon replacement axle bearing and seal kits are specially designed for each application and use all high quality bearings and seals.

Yukon replacement right hand front axle assembly for Dana 44 Jeep Rubicon with 30 splines. Yukon axles come with a one year warranty against manufacturing defects.

Fit Type Vehicle Specific. DRAIN PLUG Magnetic Drain Plug to Collect Particulates. HIGH STRENGTH Steel Cover Bolts. DURABLE Powder Coat Finish.

Included are Timken bearings and races along with high quality seals and small parts.. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and gasket.. Fits 1993 and down Dana Spicer 44 with disconnect axles.

Includes axle bearing and seal. Services one side. Yukon provides top quality replacement bearings for front and rear applications..

Vehicle Fitment Compatible with Jeep Wrangler 2007-2017, Wrangler JK 2018. Reference Number 68017174AC, 68017174AA, 68017174AD. Benefits With great functions for reliable construction, perfect performance and efficient protection of inner parts.. Specifications Position Front Axle Ratio 4.10 Dana 44 Front Axle Housing Included Yes Upper Lower Ball Joints Included Yes. Buy with Confidence A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted front axle housing. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind..

PVP.

Yukon front 4340 Chrome-Moly replacement axle kit for '69-'80 GM truck and Blazer, Dana 44 with 1930 splines. Yukon 4340 Chrome-Moly axles provide up to 50 increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon's 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner and outer axles for both left and right sides along with Yukon super joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle.

Yukon front 4340 Chrome-Moly replacement axle kit for Dana 44, Ford Bronco and F150 with 1930 splines. Yukon 4340 Chrome-Moly axles provide up to 50 increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon's 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. This kit comes with inner and outer axles for both left and right sides along with Dana u-joints. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle.

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence and performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. Fit type Vehicle Specific.

These heavy-duty lockouts feature all steel construction, including Chrome-Moly internals, for the ultimate in durability and strength. The hubs will not disengage under high torque applications and defaults to the locked position under use. Engagement comes from just a 13 turn of the all-steel, low-profile bezel. The Yukon Hardcore locking hubs are not only great looking, but features a low-profile design to minimize impact with obstacles, and a proprietary coating on the locking gears for decreased friction and long life. Yukon Hardcore Locking Hubs come with a Limited Lifetime warranty against manufacturer's defect.