- Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself. - Specially Formulated, Highly Flexible Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way. Saves time and money as compared to an axle replacement. Ideal for Preventative Maintenance that keeps the vehicle in its OE State.

Order Includes 2 x Front Right Axle Boot Kit 2 x Front Left Axle Boot Kit. Compatible With Polaris Rzr S 800 Efi, Ranger Xp 900 Eps, Rzr S 900, Ranger Xp 1000 All Options, Ranger Crew 1000 Diesel, Rzr 800 Efi, Ranger 570, Ranger 400 Ho. Part Numbers 2203440, 3236003, 2203442. Dimensions 69 mm - 2.7 in x 69 mm - 2.7 in x 106 mm - 4.2 in. We strongly suggest comparing the posted picture to the units that needs to be replaced..

This pneumatic CV joint boot spreader is designed specifically for rubber CV and steering boots it is not suitable for Plastic PVC boots Note If the boot material is too hard to open the small hole by hand, this tool cannot be used.. The Air Operated CV Joint Boot Expanding Tool is to be used solely for the stretching of flexible CV boots onto drive-shaft assemblies of automotive vehiclesNo assembly or dismantling is required. The air adaptor may be exchanged if necessary. The body is threaded to accept 14 inch BSP connector. Lubricate boot and place over expander fingers activate air vale to expand and place over joint and release. Suitable for universal and original vehicle CV joint boots with a diameter ranging from 20 to 115 mm. Maximum safe operating pressure 110 psiIf air line pressure exceeds 110 psi fit a regulator Disconnect the CV boot installation tool from the air supply after use.

FEATURES The CV Joint Boot Clamps Pliers Car Banding Tools Kit is a perfect combination pliers for fast and simple tensioning and securing of CV boot banding strap, including a built-in cutter and winding mechanism, which can quickly and effectively tighten and cut the strapping.. APPLICATION The CV joint clamp banding tool and CV boot clamp pliers is suitable for ear-type hose clamps on fuel, cooling systems and vacuum hoses, and can be used for any strapping with a width of not more than 10mm.. CRAFTS The head of the pliers adopts quenching process, which has better hardness and long service life. The pliers handle adopts non-slip design, it is more powerful to hold.. CLAMPS SIZE Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness.. WHAT YOU'LL GET 1x CV Joint Ear Clamp Banding Tool, 1x CV Boot Clamp Pliers, 12pcs Clamps 6pcs small cv boot bands and 6pcs large cv boot bands, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us.

Compatibilityfor Subaru Crosstrek 2017, for Subaru Forester 2014-2018, for Subaru Legacy 2015-2025, for Subaru Outback 2015-2025, for Subaru STI 2015-2021, for Subaru WRX 2015-2021. OE Number28396SG010. FunctionalityEffectively prevent dust from entering the ball cage and prevent the grease in the ball cage from flowing out. Replace the old and worn dust cover, protect the auto parts of your car, and make you drive more safely.. Installation StepsDirect replacement, this kit is the part you need to repair the CV joint on the specified vehicle without removing the joint itself. It is strongly recommended to have a professional install this part.. Package Content1 Pcs CV Joint Boot, 2 Pcs Clamps..

One year guarantee..

Package Includes 2PCS CV Boot with 4 Stainless Steel Clamps 6 Cable Ties.. Length 4.72 inches, Small Port ID 0.78 inches, Calibers 2.55 inch65 mm, 3.14 inch80 mm, 3.54 inch90 mm.. Protection Prevents dust, sand, water intrusion avoids grease overflow from the ball cage.. Compatibility Universal fit for most cars. Simple installation using mounting cone.. Material Made of silicone, waterproof, Dustproof, Excellent wear resistance, High temperature resistance..

Widely Applications Used for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This set of CV joint axle boot clamp pliers tools is suitable for most replacement and maintenance work.. Premium MaterialsThe pliers are made of high-quality carbon steel with black coating, which is durable, corrosion-resistant, oil resistant, high-temperature resistant, and has a long service life. The clamp head has undergone quenching treatment, resulting in higher hardness. The handle of the pliers adopts an ergonomic anti slip and heat-insulating design, providing a more comfortable grip and safer use.. Adjustable ClampsCV boot clamps, which are made of 304 stainless steel and have adjustable length, can be utilized to replace the CV sheath clamp of a damaged automobile transmission shaft.The CV Joint Ear Clamp Banding Tool is NOT designed for cutting off the ear clamps attached in the package, but it may meet your DIY needs.. Accelerate installationThe CV joint shaft sleeve clamp tool is suitable for quickly and easily tightening and fixing the dust cover clamp.. Package containsA total of 12 pieces CV Joint Axle Boot Clamp Pliers Tools1PC CV Joint Ear Clamp Banding Tool and 1PC CV Boot Clamp Pliers,5PCS Small Clamps, 5PCS Big Clamps.The joint shaft boot clamp tool is complete, easy to use and maintain..

Compatibility The dust cover fits both FWD and AWD vehicles, accommodating axle shaft diameters from 19 mm to 24 mm and compatible with various vehicle structural designs. Please carefully verify your vehicle's compatibility before purchase to avoid mismatches.. Primary Function If your vehicle's ball joint dust cover is torn, replace it promptly. Failure to do so may lead to engine damage and shorten engine lifespan. Timely replacement helps maintain optimal rotational performance.. Premium Material Crafted from durable plastic, the dust cover withstands extreme temperatures encountered during vehicle operation. Designed for long-term use in harsh environments, it resists aging and cracking, reducing replacement frequency while providing sustained, reliable protection for the drivetrain.. Cuttable Design Engineered for precision cutting, the dust cover resists fraying or delamination along trimmed edges. After trimming, simply secure it with the included stainless steel clamps for a snug fit, adapting to various installation requirements.. Specifications You will receive 2 universal joint dust boots 4.76 x 3.65 , 4 stainless steel clamps, and 6 zip ties. Installation securely fastens the dust boot to the shaft tube using the clamps, requiring no additional accessories..

Fitment CV Joint Boot Kit fit for Subaru Impreza 2004-2007, for Subaru Legacy 2005-2007 2009, for Subaru Outback 2004-2007 2009, for Subaru STI 2004-2007, for Subaru Tribeca 2006-2014, for Subaru WRX 2004-2007. OE Number28323AG010.. Function Effectively prevent dust from entering the ball cage and prevent the grease in the ball cage from flowing out. Replace the old and worn dust cover, protect the auto parts of your car, and make you drive more safely. Ideal for preventive maintenance to keep vehicles in old condition Greater strength and stability.. Reliable Material Made of rubber and metal material, durable, it is resistant to grease, abrasion, grit, high temperatures, tearing and impact damage, making it a good alternative.. Easy Installation Direct replacement, this kit is the part you need to repair the CV joint on the specified vehicle without removing the joint itself. It is strongly recommended to have a professional install this part.. Package Content1 Pcs CV Joint Boot, 2 Pcs Clamps. Please Notice Please carefully check your vehicle make model year and the part number to ensure you get the correct part..

Item List1 Pcs CV Joint Boot, 2 Pcs Clamps, 2 Pcs C-type Buckle.. Appropriate forfor Toyota 4Runner 1996-2002. FunctionIdeal for preventive maintenance to keep vehicles in old condition Greater strength and stability.. Installation InstructionsDirect replacement, this kit is the part you need to repair the CV joint on the specified vehicle without removing the joint itself. It is strongly recommended to have a professional install this part.. Please NoticeThis is non-OEM product, accessory ONLY Please carefully check your vehicle model year to ensure you get the correct part. Please check that the part number matches your vehicle before ordering..

Item List1 Pcs CV Joint Boot, 2 Pcs Clamps, 2 Pcs C-type Buckle.. Appropriate forfor Toyota Venza 2009-2012, for Toyota Sienna 2011-2012, for Toyota Highlander 2011-2013, for Toyota Camry 2012. FunctionIdeal for preventive maintenance to keep vehicles in old condition Greater strength and stability.. Installation InstructionsDirect replacement, this kit is the part you need to repair the CV joint on the specified vehicle without removing the joint itself. It is strongly recommended to have a professional install this part.. Please NoticeThis is non-OEM product, accessory ONLY Please carefully check your vehicle model year to ensure you get the correct part. Please check that the part number matches your vehicle before ordering..

Packing Includes 1 Pcs CV Joint Boot, 2 Pcs Clamps, 2 Pcs C-type Buckle. Please Notice Please carefully check your vehicle make model year and the part number to ensure you get the correct part.. Fitment CV Joint Boot Kit fit for Toyota Camry 2007-2011, for Toyota Highlander 2001-2009, for Toyota RAV4 2001-2015, for Scion tC 2005-2016, for Scion xB 2008-2015. OE Number443842180.. Function Effectively prevent dust from entering the ball cage and prevent the grease in the ball cage from flowing out. Replace the old and worn dust cover, protect the auto parts of your car, and make you drive more safely. Ideal for preventive maintenance to keep vehicles in old condition Greater strength and stability.. Easy Installation Direct replacement, this kit is the part you need to repair the CV joint on the specified vehicle without removing the joint itself. It is strongly recommended to have a professional install this part.. Reliable Material Made of rubber and metal material, durable, it is resistant to grease, abrasion, grit, high temperatures, tearing and impact damage, making it a good alternative..

Item List1 Pcs CV Joint Boot, 2 Pcs Clamps, 1 Pcs C-type Buckle.. Appropriate forfor Mini Cooper 2002-2008. FunctionIdeal for preventive maintenance to keep vehicles in old condition Greater strength and stability.. Installation InstructionsDirect replacement, this kit is the part you need to repair the CV joint on the specified vehicle without removing the joint itself. It is strongly recommended to have a professional install this part.. Please NoticeThis is non-OEM product, accessory ONLY Please carefully check your vehicle model year to ensure you get the correct part. Please check that the part number matches your vehicle before ordering..

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

4Pack CV Axle Boot Repair KitThis CV joint boot kit includes 4 durable rubber CV axle boots, 1 reusable CV boot tool cone mounting, 8 stainless steel clamps, and 12 heavy duty plastic zip ties, everything needed to reseal CV joints in one complete CV boot repair kit. Avoid replacing the entire axle or paying high labor costs. Ideal for multiple repairs, backup use, and long term maintenance, offering greater value than a single CV axle boot kit. ?Tear Resistant Rubber CV Boot KitThis high quality flexible rubber CV axle boot is specially designed for long lasting protection, offering excellent resistance to tearing, cracking, deformation, and aging. The CV boot kit forms a tight, leak proof seal that effectively blocks dirt, water, and debris while securely retaining grease helping reduce premature wear, clicking noises, and drivetrain damage. Reusable CV Boot Expander ToolMeasuring 12.4 inches in height with a 4.3 inch wide opening, this lightweight yet durable plastic CV boot tool smoothly expands and guides CV boots into place, reducing the risk of tearing or deformation. It eliminates the frustration of manual installation, protects new boots from damage, and is reusable for faster, safer future repairs. Universal CompatibilityThis CV axle boot repair kit can be trimmed to fit 3 common CV joint diameters 2.32, 2.91, or 3.35, making this kit compatible with a wide range of vehicles, including cars, UTVsATVs, and RVs. One kit works for multiple vehicles ideal for home mechanics, professional workshops, and emergency repairs. Easy To UseApply lubricant to the CV boot expander tool, slide the CV axle boot onto the CV boot tool, align with the CV joint, and push into place. Secure with clamps or zip ties, no need to remove the axle, cut the joint, or use glue. Save time and effort with a straightforward installation.

Universal constant velocity joint boot replacement is designed to easily replace your old, worn-out boot and protect your car's auto parts.Your constant velocity joints are placed in your front wheel drive car to allow the drive shaft to transmit power, But without proper protection, they are easily damaged. Every tool in this kit is ideal to easily operate in the tight spaces where your constant velocity joints are located.Please wear gloves to protect your hands during installation. The installation is simple and clear.. CVS18 Universal Split Constant Velocity Gaiter fits most cars as well as some 4x4s and light commercial vehicles, Fits CV joints measuring Shaft 18-34mm - Joint 60-116mm - Length 58-128mm.cut it to the size that fits your vehicle.Of course, if you have adhesive and our clamps to match and fix, the effect will be better.. It is resistant to oil grease, abrasion, grit, extreme of temperature, tear and imapact damage. It is a universal product. The picture includes everything about our product.We suggest that customers check the list and dimensions to see if they match your car before placing an order.

Pneumatic tool opens to 6 inches. Simple single-button operation expands the CV boot in seconds to fit over the CV joint. Available separately or in a kit with CV Boots, grease, and clamps. Each tool supplied with an Industrial Milton 14 In. body 14 In. NPT air hose nipple and an instruction sheet. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Matches OE form, fit and function. One piece neoprene boot. Kit complete with boot, grease, and hardware for complete installation. Hardware matches original design requirements. Application specific for this vehicle.

Matches OE form, fit and function. One piece neoprene boot. Kit complete with boot, grease, and hardware for complete installation. Hardware matches original design requirements. Application specific for this vehicle.

Universal FitIdeal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars.. With 20PCS CV Boot Clamp 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp.. High-quality MaterialsThe pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable.. Simple Easy To UseCrimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 12 extension handle or torque wrench.. Package Includes10X Small Clamps, 10X Big Clamps 1X Pliers Tool. The clamp and tool set can be used directly, which is convenient and worry-free..

Matches OE form, fit, and function. One piece neoprene boot. Kit complete with boot, grease, and hardware for complete installation. Hardware matches original design configuration and specifications. Application specific to ensure a correct fit for your vehicle.

SpecificationsAxle boot length4.73inch Top small port ID0.79inch Three caliber sizes2.36inch60mm,3inch76mm,3.46inch88mm.Please carefully confirm size suitability before purchasing. Ensure the purchased size meets your needs.. Premium MaterialsMade of high-quality elastic silicone with good wear resistance and toughness, withstanding harsh conditions and performing excellently for long-term use.. CompatibilityGeneric Silicone Constant Velocity CV Axle Boots.Universal car accessory that is suitable for most vehicle models, meeting your needs for repair and protection of constant velocity joints.. WaterDust ProtectionTightly fit with the CV joint on the vehicle drive shaft,effectively prevent the intrusion of dust,water and other impurities.Avoid grease spillage from the ball cage.Ensure good operation and extend the service life of the vehicle drive shaft.. Package Contains2pcs CV Boot,4pcs Stainless Steel Clamps2pcs small and 2pcs large,6pcs Nylon Cable Ties.Use a dust boot to protect your CV axle without delay..

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Silicone Material This CV axle boot is crafted from flexible silicone, resisting temperatures and wear, maintaining shape to seal CV joints and protect shafts from debris during daily driving or off road use.. Universal Fit This CV boot repair kit fits most front wheel drive and all wheel drive vehicles, compatible with common car truck and SUV models without custom adjustments.. Complete Kit This CV joint boot kit includes 2 universal CV joint boot covers fit for shaft diameter 0.75 inch to 0.94 inch, 4 stainless steel clamps, and 6 cable tiesall essentials for full CV axle repair and maintenance.. No-opening Installation This external ball cage repair kit features a turn up boot shaft design, enabling easy installation with included tools without disassembling the axle, saving time and mechanical effort.. Protective Function This CV boot kit seals and shields CV joints and drive shafts, preventing external elements from affecting performance, ideal for maintaining front drive shaft integrity and vehicle safety..

Compatibility2015-2018 for Ford for F-150 2.7L 2018 for Ford for F-150 3.0L 2018 for Ford 3.3L 2011-2018 for Ford 3.5L 2011-2014 for Ford 3.7L 2003-2010 for Ford 4.2L 2003-2010 for Ford 4.6L 2011-2018 for Ford 5.0L 2003-2010 for Ford 5.4L 2011-2014 for Ford 6.2L. Package includesCV Axle Boot Repair Kit 2 x cv boot,4 x stainless steel clips,2x grease. Easy InstallationThe Pair Outer Inner CV boot kit is easy to install with simple tools. It only takes about 30 minutes to complete the installation.. NoteThe picture shows the actual product, but please note that the color may vary due to lighting and display settings.. Excellent serviceIf you have any problems during the installation or use, then get in touch with us, we will provide you with professional technical support..

Sizes Applications The CV boots have a total length of 5.12 inches, with an inner diameter of 0.94 inches at the top opening, fitting 2.32-inch 2.86-inch 3.46-inch caliber CV joints. They are ideal replacements for aged or damaged original boots and are suitable for various vehicle models.. Package Contents This kit includes 13 pieces, including 2 silicone CV boots, 4 stainless steel clamps, 6 nylon cable ties, and 1 expander tool for auxiliary installation. The accessories are complete, with no need for additional purchases, making your maintenance and repair work easier.. Main Functions Our CV boots effectively block dust, sand, and water from entering the CV joint while preventing grease loss, maintaining joint lubrication, and avoiding friction and excessive wear. This extends the service time of the CV joint, ensuring smooth and safe vehicle operation.. Superior Quality Made of silicone, the CV boot offers excellent flexibility and fits snugly around the CV joint. It is also wear-resistant, oil-resistant, corrosion-resistant, and heat-resistant, capable of withstanding various harsh environments without aging, cracking, or deforming, making it highly durable.. How to Use First, flip the boot over and place it over the opening end of the expander tool. Then, align it with the CV joint and gradually push the boot into place until it covers the joint. Finally, secure it with the clamps and ties to ensure a stable and sealed installation..

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Fits 19mm-24mm Axle ShaftsThis universal CV boot kit is designed for axle shaft sizes from 19mm to 24mm please check your vehicle size before purchase for proper fit.. 2PCS CV Boot KitIncludes 2 CV boots and 4 stainless steel clamps, providing the basic parts needed for CV joint boot replacement and axle protection.. Waterproof Dustproof ProtectionThe CV joint boot helps block water, dust, road debris, and grease leakage, keeping the axle shaft and CV joint better protected during daily driving.. Flexible Durable DesignMade for flexible installation and long-lasting use, this axle boot kit is suitable for replacing worn, cracked, or damaged CV boots.. Universal Auto Repair AccessoryA practical CV axle boot repair kit for most compatible cars, trucks, and vehicles ideal for DIY repair, garage maintenance, or replacement..

Compatibility The dust cover fits both FWD and AWD vehicles, accommodating axle shaft diameters from 19 mm to 24 mm and compatible with various vehicle structural designs. Please carefully verify your vehicle's compatibility before purchase to avoid mismatches.. Primary Function If your vehicle's ball joint dust cover is torn, replace it promptly. Failure to do so may lead to engine damage and shorten engine lifespan. Timely replacement helps maintain optimal rotational performance.. Premium Material Crafted from durable plastic, the dust cover withstands extreme temperatures encountered during vehicle operation. Designed for long-term use in harsh environments, it resists aging and cracking, reducing replacement frequency while providing sustained, reliable protection for the drivetrain.. Cuttable Design Engineered for precision cutting, the dust cover resists fraying or delamination along trimmed edges. After trimming, simply secure it with the included stainless steel clamps for a snug fit, adapting to various installation requirements.. Specifications You will receive 2 universal joint dust boots 4.76 x 3.65 , 4 stainless steel clamps, and 6 zip ties. Installation securely fastens the dust boot to the shaft tube using the clamps, requiring no additional accessories..

Application Range Universal CV Boot Repair Kit fits for shaft measurements ranging from 19 - 24mm, including 1 CV boot,1 Large Clamp,1 Small Clamp Being crafted from stretchable materials, It's also commonly referred to as an axle boot repair kit or CV joint boot kit. Material Constructed from high - performance NBR rubber, our CV Axle Boot is highly durable and resistant to harsh conditions You can use it for cv joint boot applications or as a general cv boot for your vehicle. Installation Guide view it on the bottom videoFirst, remove the old cv boot by pulling it straight off the axle Then, align and slide the new boot onto the axle using the mounting cone Finally, secure it with a cv boot clamp. Compatibility Compatible with most vehicles including cars, 4x4s, and light commercial vehicles, our Universal CV Axle Boot offers universal compatibility and top - notch protection, whether you need a cv axle boot kit or a cv joint boot kit, this product is designed to meet your needs. Maintaining a simple 30 - second weekly check for your cv axle boot Look for any signs of aging or deformation such as cracks, bulging, or worn - out rubber. Tighten any loose cv boot clamps, as they play a vital role in preventing leaks.

Proprietary engineering processes ensure that all CV Drive Axles meet OE form, fit and function. Neoprene boots are designed with additional bellows, when needed, to resist bellow stress and cracking, which is the leading cause of boot failure. An axle retaining nut is supplied with every unit for a hassle-free installation, due to the likelihood that the original retaining nut is worn or stripped. CV Drive Axle measurements are validated after assembly to ensure a proper fit Threads are precision rolled to ensure proper fit when axle nut is installed. Boot clamps are pneumatically crimped, creating a perfect seal between the boot and housing.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

CV Boot Clamp Pliers Set CV boot clamp tool can be used with any strapping that does not exceed 25 inches 10mm in width. Suitable for ear type hose clamps on fuel hoses, cooling systems, and vacuum hoses.. Versatile Usage This 2pcs CV Joint Boot Clamp Pliers Set is designed to securely fasten and flatten clamps on ear-type CV joint boot clamps. Additionally, it can also be used for securing late model GM CVJ boot clamps, providing a practical solution for various automotive repair needs.. Reliable and Effective Constructed from pressed steel with a black-coated finish, these pliers are built to last and withstand rigorous use. The built-in cutter and winding mechanism allow for quick and efficient tightening and cutting of the strapping, ensuring a secure and reliable hold.. Wide Compatibility Suitable for ear-type hose clips found on fuel, cooling system, and vacuum hoses, these CV boot clamp pliers offer versatile compatibility, making them an essential tool for any automotive enthusiast or professional mechanic.. User-Friendly Design The cv boot clamp pliers are equipped with non-slip rubber handles, providing a comfortable and secure grip during use. This ergonomic design helps reduce user fatigue, allowing for prolonged and efficient work..

Direct replacement - this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Ideal solution - this kit is a reliable replacement for original components that have failed due to wear. Durable construction - this kit is made from quality components to ensure reliable performance and a long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - Input your vehicle into the garage tool and check Confirmed Fit bar at the top of the page. If there is an i in a blue circle, additional verification is needed. Please hover over the i to verify fitment notes match your vehicle..

Specifications Axle boot is 4.72 inch in length and small port inside diameter is 0.78 inch, and contains three different calibers 2.55 inch65 mm, 3.14 inch80 mm and 3.54 inch90 mm. Please check the size data you need before purchase. You Will Get 2 CV joint boot, 4 stainless steel clamps and 6 cable ties. Suitable for most vehicles. Installation is simple, you simply remove the old or worn CV boot, and then use the mounting cone to put the new CV axle boot into the axle. Excellent Protection The CV axle boot acts like a sturdy shield, providing full protection. It can effectively prevent the intrusion of dust, sand, water and other impurities, and at the same time, avoid the overflow of grease from the ball cage. Good Quality Made of quality silicone material, with excellent wear resistance, high temperature resistance. The softness and elasticity of the silicone allows the CV boot to fit tightly and not loosen or fall off due to the vibration of the vehicle. Maintenance In the daily maintenance of the vehicle, the CV axle boot should be regularly checked for signs of damage, cracks, aging, deformation, and whether the fixed devices at both ends are loose. If any damage is found, it should be replaced in time.

For all ear-type clamps including GM FWD outboard CV joints.. Designed for use with a torque wrench, as required for stainless steel bands.. Item Package Dimension 10.43L x 5.71W x 1.1H inches. Item Package Weight - 1.2 Pounds. Item Package Quantity - 1. Product Type - PLIERS.

Comes in skin-pack. For all Band-It and Band-It Jr style clamps. Tool is easily disengaged from the band after the band is tightened. Country of Origin China.

Material This dust cover is made of rubber material, with good elasticity and toughness, high and low temperature resistance, and anti-aging. Under the vibration and steering conditions of the vehicle, it can stably fit the ball cage to ensure sealing and protection effects.. Protection Function As a protective clothing for the ball cage, it can effectively avoid mud and water from invading the ball cage, avoid ball cage oil leakage, reduce universal joint wear, avoid abnormal noise when turning, acceleration jitter and other problems in the vehicle, and extend the service life.. No-disassembly Design No need to disassemble complex outer ball cage and other parts. With the help of special tools such as expanders, the dust cover can be directly replaced, saving maintenance time and improving maintenance efficiency.. Packaging Content The package includes 1 Ball cage dust cover, 1 Large stainless steel ties, 1 Small stainless steel ties, and 3 Nylon cable ties. It is suitable for most cars and can be installed as long as the specifications are suitable.. Practical Compared with replacing the entire ball cage assembly, the repair kit has a low cost and can easily solve the problem of damaged ball cage dust cover. It meets maintenance needs in one stop and is cost-effective..

Material CV Joint Boot Clamp Pliers And CV Boot Banding Tool constructed from pressed steel,Equipped with non-slip insulated handle,Safe,comfortable and durable.black-coated finish,corrosion-resistant, oil-resistant, high-temperature resistant,and has a long service life.. Suitable CV Axle Boot Clamp Kit Suitable for any banding up to 25 inch 10mm in width,for example most of cars ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.. Simple Easy To UseThe 2pcs CV joint boot clamps pliers car With a built-in cutter and winding mechanism ,can be tightened and cut quickly and effectively.. Cv Boot Tool 5Pcs Small CV Boot Clamps and 5Pcs Large CV Boot Clamps,Used for securing Your ATV UTV CV boot clamps,or can meet your different Daily needs.And a pair of gloves for protecting your hands.. Package includes1Pcs CV Boot Banding Tool 1Pcs Boot Clamp Pliers 5Pcs Small CV Boot Clamps and 5Pcs Large CV Boot ClampsThe CV Boot Tool kit All goods are stored in the tool kitEasy To Keep and Carry..

Bailcast's universal constant velocity joint boot replacement is designed to easily replace your old, worn-out boot and protect your car's auto parts.. The Bailcast's gaiter boot is designed to fit almost any vehicle due to its universal form and stretchable materials cut it to the size that fits your vehicle.. Every tool in this kit is ideal to easily operate in the tight spaces where your constant velocity joints are located.. It is resistant to oil grease, abrasion, grit, extreme of temperature, tear and impact damage.. CVS18 fits most cars as well as some 4x4s and light commercial vehicles, Fits CV joints measuring Shaft 18-34mm - Joint 60-116mm - Length 58-128mm.. Can be fitted to trilobaltripod joints, follow the simple step by step instructions found printed in the box or below - This boot is aimed more at the DIY mechanic and, as the name suggests, has a tongue and grove split running its full length,Once in position the split joint is glued using the special rubber adhesive that is included in the kit, making a strong durable join..

Material Crafted from high quality 304 stainless steel, our CV boot clamp offers excellent corrosion resistance and robust rust resistance. This ensures that the cv axle boot clamp remains hard and sturdy, providing a reliable solution. Versatile Size Our CV boot clamps are available in two adjustable sizes small clamps fitting diameters from 0.78-1.96 inches20-50mm, 0.275 7mm in width and 0.023 0.6mm in thickness Large clamps ranging from 1.96-4.72 inches50-120mm, 0.354 9mm in width and 0.031 0.8mm in thickness This versatility ensures a nice fit for various CV axle boot repair kit requirements. Easy Installation Engineered for user convenience, these CV boot clamps are easy to install, suited for both left and right, as well as front and rear CV joints. Function Our CV boot clamps are designed to be applied on drive and CV axle, making them a perfect replacement for broken drive shaft CV boot clamps This adaptability ensures wide-ranging applicability, providing solutions tailored to diverse maintenance needs. Comprehensive Package The package includes a total of 40 pieces, comprising 20 small CV boot bands and 20 large CV boot bands This generous provision allows for extensive applications, making it an ideal choice for both personal and professional automotive projects, maintaining readiness for any CV boot clamp repair.

Premium MaterialCV axle boot is made of silicone with good elasticity and toughness, fits tightly into the CV boot, withstand pressure and friction during use without being easily damaged, water resistant and durable, withstands the effects of harsh environments to keep long time use.. Product DimensionThe axle boot measures 4.74 inches in length, have the top opening inner diamter of 0.81 inches, and fits universal joint with 2.32 inches 2.86 inches 3.46 inches calibers. Please check size suitability carefully before purchase.. Dust and Water ProofCV axle boot kit fits snugly into the CV joints on the vehicle's drive axle, effectively blocking the intrusion of dust, water and other impurities, providing all-around protection for the ball cage and prolonging its service life.. Universal CompatibilityOur CV boot repair kit are suitable for shaft sizes from 19 mm to 24 mm, is a universal car accessory that fits a diverse range of vehicles. From sedans to SUVs, pickups to ATVs,this kit is the go-to solution for all your CV boot fastening needs.. Easy to InstallApply some grease to the CV axle, install our CV axle boot on the opening of the expender tool, and then align the CV axle and push the CV axle boot hard so that it completely covers the CV axle, and securely fasten it to the CV axle using the cable ties and clamps.. What You ReceiveYou will receive 2 CV joint boot, a pair of gloves, 1 expander tool,1 CV clamps,4 stainless steel clamps and 6 cable ties. Suitable for shaft size 19mm-24mm.A full range of accessories to make your maintenance and repair work more easily..

Premium MaterialCV axle boot is made of silicone with good elasticity and toughness, fits tightly into the CV boot, withstand pressure and friction during use without being easily damaged, water resistant and durable, withstands the effects of harsh environments to keep long time use.. Dust and Water ProofCV axle boot kit fits snugly into the CV joints on the vehicle's drive axle, effectively blocking the intrusion of dust, water and other impurities, providing all-around protection for the ball cage and prolonging its service life.. Product DimensionThe axle boot measures 4.74 inches in length, have the top opening inner diamter of 0.81 inches, and fits universal joint with 2.32 inches 2.86 inches 3.46 inches calibers. Please check size suitability carefully before purchase.. Universal CompatibilityOur CV boot repair kit are suitable for shaft sizes from 19 mm to 24 mm, is a universal car accessory that fits a diverse range of vehicles. From sedans to SUVs, pickups to ATVs,this kit is the go-to solution for all your CV boot fastening needs.. Easy to InstallApply some grease to the CV axle, install our CV axle boot on the opening of the expender tool, and then align the CV axle and push the CV axle boot hard so that it completely covers the CV axle, and securely fasten it to the CV axle using the cable ties and clamps.. What You ReceiveYou will receive 2 CV joint boot, a pair of gloves, 1 expander tool,1 CV clamps,4 stainless steel clamps and 6 cable ties. Suitable for shaft size 19mm-24mm.A full range of accessories to make your maintenance and repair work more easily..

Material High Quality Silicone Made CV Boot Joint. Pack of 2. Color Black, Placement on Vehicle Front, Rear. Size Please check the photo shown, 5 125mm height, OD 90mm. Generic Silicone Constant Velocity CV Boots Joint Replacement Cover Drive Shaft Blue 5 Height. The Speedi and Quick Boot are installed without special tools. FrontRear Assembled, CV Joint Boot - Ball Joint Dust Boot - Dust Cover - Tie Rod End - Track Rod End - Dust Boot.

FitmentCV Joint Banding Boot Axle Clamp Tool only suitable for mounting CVT joint boots, ATV axle boot, AutoATV.. With 20 PCS CV Joint Boot Clamp SetIncludes 10 X small clamps 9.8 inch and 10 X large clamps 19.7 inch. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length and get tighter with each pull. If you need to cut off the excess, you must use the CV Boot Joint Ear Clamp Banding Tool to do so.. With CV Joint Ear Clamp Banding Tool This set of CV Joint Ear Clamp Banding Tool is newly designed to tighten and cut straps quickly and efficiently, with built-in cutters and winders.Auto ATV CV Joint Banding Boot Axle Clamp Tool's clamps are made of black coated stamped steel, which looks shinier and is completely rust and corrosion resistant.. High-quality MaterialsThis set of CV Joint Banding Boot Plier Tool is made of quality stainless steel throughout, which is corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness. Equipped with ergonomically designed non-slip insulated handles, allowing you to get the job done comfortably and efficiently.. Package IncludesA rare 21-piece CV Joint Banding Boot Plier Tool on the market. 10 X small clamps, 10 X large clamps, and 1 CV Boot Clamp Banding Tool. This set allows for comfortable and effective professional CV transmission repair..

Matches OE form, fit and function, for Vintage Air Cooled VW and Porsche Applications ONLY. Quality construction for durability. Designed for under vehicle environment. Application specific for this vehicle for the vehicles cataloged, NOT UNIVERSAL. Confirm Application Before Ordering.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Not intended for installation tools that stretch the small end of the boot over the CV joint. Application specific for your vehicle, not universal. Matches OE form, fit and function. Kit includes boot, grease, and clamps. Grease includes extreme pressure additive.

Heavy Duty CV Boot Clamp Pliers Created for securely fitting ear-type clamps, especially the sturdy stainless steel ones that need higher compression force.. Heavy duty 45 steel construction with chrome vanadium steel jaws and comfortable rubber handle. Total length 11 inch 278 mm, Max jaw capacity 1.78 inch 45 mm.. The 38 inch Torque Drive Socket is perfect for precisely fitting high-strength stainless steel clamps on modern vehicles, compatible with Ford, VAG, Vauxhall, Opel, and others, where a specific torque setting typically 23-30 Nm is crucial.. When exact torque settings aren't necessary, this tool can also be operated manually using a 38 drive standard ratchet or flexible handle bar.. The two-way jaw design expands access points for clamp tightening, particularly helpful in tight suspension and driveshaft spaces..

1.Material CV Boot Made of Silicone Band Made of Stainless SteelPliers Made of Metal. 2.Size 130mm height, OD 95mmPlease check the photo shown. 3.Package included 4 Piece x Silicone CV Boot 8 Piece Stainless steel clamp1 piece Pliers. 4.Save Time and Money as compared to an axle replacement.. 5.Fitment Universal For Car,Trucks, SUV,ATV, Quad Bikes.....

1.Material High Quality Silicone Made CV Boot Joint.. 2.Package Included 2piece .. 3.Perfect match with original equipment.. 4.Generic Silicone Constant Velocity CV Boots.Easy to install. Strong elasticity, can stretch freely.. 5.FrontRear Assembled,CV Joint Boot - Ball Joint Dust Boot - Dust Cover - Tie Rod End - Track Rod End - Dust Boot..

UNIVERSAL COMPATIBILITY This cv boot axle joint repair kit features a cut-to-size design that fits shaft diameters from 19mm to 34mm. It is a versatile replacement part for car owners to solve fitment issues across most vehicle models.. PREMIUM SILICONE DURABILITY Crafted from high-elasticity thickened silicone, this cv joint boot fits snugly to provide a leak-proof seal. This silicone boot set effectively solves material cracking in extreme weather for daily drivers.. SUPERIOR AXLE PROTECTION Acting as a sturdy shield for drive joints, this cv boot axle joint repair kit blocks dust and water. It is the ideal protective cover for off-roaders to prevent grease leakage and ball cage wear.. EFFICIENT MAINTENANCE SOLUTION Designed for seamless joint maintenance, this stretchable silicone boot simplifies the repair process. Our universal cv boot helps DIY mechanics restore drivetrain functionality during routine vehicle inspections.. COMPLETE REPAIR KIT Each cv joint boot fits includes 1 boots, 2 stainless steel clamps, and 3 nylon cable ties. This all-in-one kit is the perfect fix for torn boots, ensuring vehicle safety and long-lasting maintenance..

VERSATILE APPLICATION Our CV joint boots are compatible with a range of components such as constant velocity CV joint boots, ball head dust covers, and tie rod ends. Enjoy the flexibility of use for both front and rear assembly. PREMIUM SILICONE MATERIAL Made from premium silicone, our universal CV joint boots offer high temperature and wear your universal joint from external damage with this material. EFFECTIVE DUSTPROOFING Prevent dust, sand, and water vapor from infiltrating your CV joint with our protective boots. By reducing friction and wear, they help extend the service life of your universal joint for optimal performance. CONVENIENT INSTALLATION Easily install our silicone CV joint boot without the need to remove the universal joint. With a telescopic design that adapts to various universal joint sizes, users can effortlessly place the boot for a hasslefree experience. PRECISION FIT Our constant velocity joint boots feature accurate sizing and appropriate elasticity to snugly fit car CV joints. Ensuring a secure enclosure around the universal joint without any looseness, experience a and fit.

Saves time and money as compared to an axle replacement. - Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself. Ideal for Preventative Maintenance that keeps the vehicle in its OE State. - Specially Formulated, Highly Flexible Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way.

Precise Fit for Many Vehicles Engineered to fit shafts from 26mm to 34mm, this CV boot kit offers broad compatibility. A reliable replacement solution for many cars, SUVs, and trucks to help maintain constant velocity joint function.. Superior Protection with Durable Rubber Crafted from premium, heavy-duty rubber designed to resist abrasion, oil, and harsh conditions. Effectively shields CV joints from damaging dust, water, and road debris for reliable protection. Simplified Installation Saves Time Our tie rod boot measures 4.92 inches in length. You can put it into the axle by stretching it and using the mounting cone tool, then just cut the excess and secure it with clamps. Complete CV Boot Kit Includes 4 x CV joint boots, 8 x stainless steel clamps, 4 x g-rease, 1 x Pliers. Buy with Confidence Comes with a 12 month w-arranty.If the replacement parts of the universal joint gait protection cover are damaged, please contact us and we will provide a timely solution. After receiving the kit, please carefully check whether the parts are complete.

PRODUCT SIZE Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness. USEFUL TOOL Remove the old cv boot clamps, clean up the grease, and put the new clamps on, and then just lock and fasten You can install it in a few minutes. WIDE APPLICATION Used on drive CV Axle, work well with your cv boot kit such as atv's and utv's cv boots A perfect replacement for your loose or broken cv boot clamp. PREMIUM MATERIAL This 24pcs cv joint clamp is made of high quality 304 stainless steel, sturdy and stability, corrosion resistant, wear resistant, with reliable use and long service life. AFTER-SALES DESCRIPTION If you have any questions about the purchased tool, please contact us in time, customers satisfaction is our top priority.

Precise Fitment The CV boot Kit is suitable for 22mm to 28mm shafts. Engineered to suit most carsSuvTruck, this gait protection cover replacement part offers broad compatibility. Perfect for restoring constant velocity joint functionality across various vehicle models. Essential Axle ProtectionMade with premium heavy-duty rubber, resisting abrasion, oil, and extreme conditions. Shields CV joints from dust, water, and debris, ensuring long-term durability. Easy to installThe split design allows you to replace the boot without removing the driveshaft, saving time and labor costs. Complete CV Boot Kit Includes 1 x CV joint boot, 2 x stainless steel clamps, 1 x g-lue, 1 x g-rease, 1 x c-utting tool and a pair of gloves. Buy with Confidence Comes with a 12 month w-arranty.If the replacement parts of the universal joint gait protection cover are damaged, please contact us and we will provide a timely solution. After receiving the kit, please carefully check whether the parts are complete.

Perfect CV Joint Banding Tool for fast tensioning and securing of CV joint boot banding strap.. CV joint boot clamp wrench with high quality steel help you install the CV joint boot easily. Clamp free end of 38 or 14 reel of strap around boot thread strap through clevis head and reel mandrel slot place 12 ratchet on reel bend back of strap on boot and clip on to apply tension and cut off fold remaining strap end into clip and tap down on clip ears to secure double wrap for added strength. Equipped with a straight crimping clamp at the end, this CV boot crimps the clamp lugs to greatly prevent leakage.. The CV Boot Clamp Pliers for Ear-Type Clamp Crimping or Removal on for Audi, VW, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps,also be used for securing ATV UTV boot clamps..

ApplicableThe 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.. MaterialPliers constructed from pressed steel with black-coated finish.. SuitableUse with any banding up to 25 inch 10mm in width. Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses. Also use to secure late model GM CVJ. Plier works on steering gear gaiters and fuel hoses on compatible with VAG, compatible with Opel, compatible with BMW, compatible with Mercedes Benz, compatible with Honda, compatible with Nissan, compatible with Mazda, and more..

Material - Pliers constructed from pressed steel with black-coated finish. With non-slip rubber handle, can effectively reduce user fatigue.. Advantage - With the help of the built-in cutter and winding mechanism, the strapping can be tightened and cut quickly and effectively.. Features - This CV joint plier is easy to use, which is essential to crimp and flatten clamps on ear type CV joint boot clamps.. Application - This kind of CV joint clamp is practical and suitable for ear hose clamps on fuel, cooling system and vacuum hoses.. Specification - CV joint clamp tool includes a 4.25 inch 10.8cm long plastic handle and 1 inch 2.5cm long rubber grips on side levers. Pliers includes 5.75 inch 14.6cm long formed rubber handles..

Heavy Duty. Comfortable double dipped handles. Hardened steel. CV boot clamp installer. To be used with any banding up to 10mm in width.

Compatibility - CV Joint Boot fit for 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Chevrolet Silverado 1500 2007 Chevrolet Silverado 1500 Classic. Compatibility - CV Joint Boot fit for 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Chevrolet Silverado 1500 2007 Chevrolet Silverado 1500 Classic. Quality - CV boot be made of neoprene, high tensile strength , oil resistance , resistance. Function - To CV axle against damage from sand, and to solve problems such as noise and oil leakage, providing thorough ion boot for CV joint.. Tightness - Comes with 2 stainless steel clamps, great resistance to and rot. Blocking foreign material.. Tips - Please check product information carefully before placing an order.