MATERIAL The cv joint clamp is made of high quality 304 stainless steel, have good corrosion resistance, strong rust resistance, hard and sturdy.. PRODUCT SIZE Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness.. WIDE APPLICATION Used on drive CV Axle, work well with your cv boot kit such as atv's and utv's cv boots. A perfect replacement for your loose or broken cv boot clamp.. SIMPLE TO USE Remove the old cv boot clamps, clean up the grease, and put the new clamps on, and then just lock and fasten. You can install it in a few minutes.. PACKAGE INCLUDED 50pcs small cv boot bands and 50pcs large cv boot bands, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us.

USEFUL TOOL Use the cv boot clamp pliers for Ear-Type clamp crimping or removal on VW, Audi, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on ear-type constant velocity joint boot clamps.. WIDE APPLICATION Designed for use with a 12 torque wrench, required for stainless steel bands For use on VW, Audi, BMW, Mercedes, Honda, and Mazda vehicles For all ear-type clamps including late model GM FWD outboard CV joints.. EASY TO USE Crimp the crimp loop and then push down on the crimp to lock the crimp in place 12 square holes allow you to use two 12 socket wrenches with extensions Long length means you need access for the crimper.. STAIGHT CRIMP These are a straight crimper pliers meaning that the jaws are in-line on the end of the tool, offers a perfect crimp on clamp ears to prevent leakage.. PREMIUM MATERIAL This cv axle boot clamp tool is made of high hardness carbon steel, heat-treated, sturdy and steady, corrosion resistant, wear resistant, with reliable use and long service life..

CV Joint Boot Clamps Universal Adjustable Stainless Steel CV Boot Band Clamp Drive Shaft Joint kit-12 Pcs Small 12 Pcs Large.Color Silver Tone.. Adjustable Diameter 1.8-3.6, 1.8-9.0 .Note Ear Clamp Pliers are not included with this item.. Stainless steel material, prevent rust, not easy to crack, peel, break, etc., can be lasted for a long time.. They're not a cheap design . It is non-porous, high density, not easy to break or deformation compared to other. If you don't found heavy duty clamp, they have a lot pcs, you can choose to put a few more.. Warranty We provide half year limited warranty, if you have any question about our product, please feel free to contact us.. Good for light duty hose banding or Small Shaft Universal CV Boots Joints.

PREMIUM MATERIAL The CV Boot Clamp Tool are made of premium quality carbon steel. After heat treatment, phosphating and black coloring, has good corrosion resistance, not easy to rust, deformation, sturdy and durable.. EASY TO USE The drive shaft clamping tool is perfectly designed to help you quickly and undamaged remove and install the locking strap on the dust boot. Crimp the clamp, then turn the screw to push the crimp to lock in place. Grease the screw to make it work more smoothly.. PRODUCT SIZE The CV boot clamp tool features adjustable jaw openings. The 10-piece small clamps have diameters ranging from 0.78 to 1.96 inches 20 to 50 millimeters, widths of 0.275 inches 7 millimeters, and thicknesses of 0.023 inches 0.6 millimeters. The 10-piece large adjustable diameter is 1.96-4.72 inches 50-120 millimeters, the width is 0.354 inches 9 millimeters, and the thickness is 0.031 inches 0.8 millimeters.. USEFUL TOOL This CV boot clamp pliers is perfectly used to closing the locking straps of single ear hose clamps, and its specially used to remove and install the locking straps on the automobile dust boot. WIDE APPLICATION This drive shaft CV axle boot clamping tool fits for locking straps on axle boots compatible with most cars. The size and structure perfectly match most single ear hose clamps..

MATERIAL The head of the pliers adopts quenching process, which has better hardness and long service life. The CV boot clamp is made of high quality 304 stainless steel, have good corrosion resistance, strong rust resistance, hard and sturdy.. NON-SLIP HANDLE The pliers handle adopts non-slip design, it is more powerful to hold and it is more comfortable to use.. THE SIZE OF CRIMP BANDS Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness.. EASY INSTALLATION The Plier is a good ideal for installing clamps on fuel, cooling systems and vacuum hoses. Just crimp the clamp and then push down on the crimp to lock into place.. WHAT YOU'LL GET 1x Pliers Tool and 20pcs Clamps10pcs small cv boot bands and 10pcs large cv boot bands, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us.

This cv boot clamp tool features free-adjusting jaws to fit different clamp sizes, plus a 0.5 13mm adjustment screw for precise tensioning. With a maximum jaw opening of 0.78 20mm, it eliminates the need for multiple toolsperfect for quickly securing CV boot clamps without fumbling. Great for DIYers and pro mechanics alike. Built for tough cv axle removal tasks, this tools body is made of 6061 aluminum with a blue anodized finishlightweight yet rigid enough to handle repeated use. Its jaws are crafted from 45 steel, treated with heat for extra strength, and blackened to prevent rust and corrosion. No more dealing with flimsy tools that break mid-job this one stays durable even in greasy, under-car conditions. Included are 20 cv boot clamps, all made of rust-resistant 304 stainless steel. You get 10 large clamps adjustable diameter 1.96-4.72 inch50-120mm width 0.3549mm thickness 0.0310.8mm and 10 small clamps 0.78-1.96 inch20-50mm diameter 0.2757mm width 0.0230.6mm thickness. They fit most cars, trucks, and SUVs, so youll always have the right size for your CV boot repair. These cv boot clamp pliers combine functionality with comfort. The aluminum body reduces hand strain during long repairs, while the 45 steel jaws deliver a secure grip on clampsno slipping, even when your hands are oily. The free-adjusting feature lets you lock in the perfect position fast, making it easy to crimp or remove clamps without damaging your CV boot. This cv boot tool kit has everything you need for CV boot maintenance the adjustable clamp tool, 20 stainless steel clamps 2 sizes, and durable construction that lasts. No more buying separate tools or clampsthis kit saves you time and money. Whether youre fixing a cracked boot or replacing an old clamp, it turns a tedious repair into a straightforward task.

Plier Aienxn Pliers are made of pressed steel with black coating, which is very strong after heat treatment. Clamp CV boot clamp is made of 304 stainless steel with adjustable length, which can be used to replace the CV sheath clamp of damaged transmission shaft of automobile. Features Through the built-in pliers and winding mechanism, the strap can be tightened quickly and effectively These clamps are resistant to corrosion, high temperature and long service life, and can be used in harsh environments. Application Plier set is used for most cars, for clamping and fixing the hoop of automobile ball cage Mainly used for installing clamps on fuel filters, water pumps, constant velocity universal joint shoes, ATV axle shoes and other cooling system hoses. Easy to Use The plier set is used to quickly and simply tension and fix the dust cover strap of constant velocity universal joint The jaw is specially treated, which has great torque and saves time and effort Non-slip insulated handle, comfortable grip. Package 1pcs plier, 5pcs small clamps and 5pcs big clamps..

Crimping Plier Tool Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps.. Clamp Size Are Adjustable Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness.. Material The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage.. Function and Use These clamps are locking secure and tight on drive CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp.. What You'll Get 1Pcs Ear Clamps Pliers, 6Pcs Small CV Boot Clamps, 6Pcs Large CV Boot Clamps are included in this kit, same as the pictures, this kit tool can meet your daily need..

Material Crafted from 304 stainless steel, these clamps ensure excellent corrosion and rust resistance for long-lasting durability.. Versatile Sizing Includes 12 small clamps 0.78-1.96 inch diameter and 12 large clamps 1.96-4.72 inch diameter, offering flexibility for various applications.. Wide Range of Use Ideal for securing CV and drive axle joints, this kit is perfect for use in ATVs, UTVs, and other vehicles needing replacement of loose or broken clamps.. Easy Installation Simplified installation process involves removing old clamps, cleaning the grease, and fitting and fastening the new clamps securely..

Widely Applications Used for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This set of CV joint axle boot clamp pliers tools is suitable for most replacement and maintenance work.. Premium MaterialsThe pliers are made of high-quality carbon steel with black coating, which is durable, corrosion-resistant, oil resistant, high-temperature resistant, and has a long service life. The clamp head has undergone quenching treatment, resulting in higher hardness. The handle of the pliers adopts an ergonomic anti slip and heat-insulating design, providing a more comfortable grip and safer use.. Adjustable ClampsCV boot clamps, which are made of 304 stainless steel and have adjustable length, can be utilized to replace the CV sheath clamp of a damaged automobile transmission shaft.The CV Joint Ear Clamp Banding Tool is NOT designed for cutting off the ear clamps attached in the package, but it may meet your DIY needs.. Accelerate installationThe CV joint shaft sleeve clamp tool is suitable for quickly and easily tightening and fixing the dust cover clamp.. Package containsA total of 12 pieces CV Joint Axle Boot Clamp Pliers Tools1PC CV Joint Ear Clamp Banding Tool and 1PC CV Boot Clamp Pliers,5PCS Small Clamps, 5PCS Big Clamps.The joint shaft boot clamp tool is complete, easy to use and maintain..

Premium Material The overall pliers are made of alloy, durable, corrosion resistant, oil resistant, high temperature resistant and long life. The pliers head is hardened and treated for higher hardness.. With 20PCS CV Boot Clamp Includes 10 small CV boot clamps and 10 large CV boot clamps made of stainless steel with high toughness and adjustable length for you to replace the broken drive shaft CV guide clamps for your car.. Ergonomic Handle Equipped with ergonomically designed non-slip insulated handle, comfortable grip, can improve your work efficiency. The clamp and tool set can be used directly, which is convenient and worry-free.. Easy To Use Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 12 extension handle or torque wrench.. Universal Fit Omninmo CV joint axle boot clamp pliers tool is ideal for installing clamps on fuel filters, water pumps, CV joint boots, ATV axle boot and other cooling system hoses. This CV joint axle boot clamp plier fits most of cars..

Fitment This CV joint axle boot clamp plier suitable for various scenarios, for mounting CVT joint boots, ATV axle boot, AutoATV. Offers extensive applicability. Stainless Steel Band Clamps Crafted from premium stainless steel, these band clamps deliver durability, corrosion resistance, and long service life. The set includes three different sizes to accommodate diverse component installations. CV Joint Ear Clamp Pliers Crafted from stainless steel, this pliers offer durability, corrosion resistance, oil resistance, and high-temperature tolerance. The jaws undergo hardening treatment for enhanced strength. Equipped with non-slip, heat-insulated handles for practical comfort. Easy To Use Crimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 12 extension handle or torque wrench. Package Includes This CV joint ear clamp banding boot clamp pliers tool kit contains three different sizes of stainless steel clamps and 1 x CV joint clamp pliers. This tool set meets your diverse daily needs.

Material 304 stainless steel construction, anti-rust and anti-corrosion, durable to use.. Adjustable Diameter 1.8 - 3.2, 1.8 - 5.6.. Design Universal fit, 360 degree uniform sealing, just screw and cut.. Usage Can be used for CV boots, ATV bogies, UTV and other applications.. Package Contents 10 x 1.8-3.2 CV boot clamps and 10 x 1.8 - 5.6 CV boot clamps..

For Car RepairThe set features an integrated cutter and winding mechanism for precise, effective tightening and cutting hose clamps, streamlining automotive maintenance tasks. Whether it is a smaller ball cage or a larger one, this design provides a solid and reliable hold.. Wide Use RangeYou will get 1pc CV boot clamp plier, 5set CV boot clamps. The plier can clamp and fix the hoops of the car's ball joint. Widely used in most cars, trucks and SUVs fuel filters, water pumps, isotropic gimbal shingles, ATV axle shaft shingles, and other cooling system hose clamps.. AdjustableCV boot clamp tool is equipped with adjustable ball cage clamps to make it more versatile. You can adjust the size of the ball cage clamp as needed to accommodate different sized hoses.With a protective black coating design, ensuring resilience, and long-term performance.. With CV Boot ClampsWIth 10pcs5set CV boot clamps. Applied to stainless steel, hoses, gas pipes, ships, chemicals, etc. Suitable for automobilesshipsmachine toolselectricitycommunicationsconstructionfirefightingdaily life. It has the characteristics of high strength, pressure resistance, stable quality and long service life.. High PerformanceThe steel belt flanging process effectively solves the problem of steel belt burrs scratching the pipe surface and increases the strength of the steel belt. The screws and nuts of the products are carefully selected and are not easy to slip or break. The thread texture is clear, the thread is deep and long, it is not easy to slip, has good anti-slip properties, and can be reused..

FEATURES The CV Joint Boot Clamps Pliers Car Banding Tools Kit is a perfect combination pliers for fast and simple tensioning and securing of CV boot banding strap, including a built-in cutter and winding mechanism, which can quickly and effectively tighten and cut the strapping.. APPLICATION The CV joint clamp banding tool and CV boot clamp pliers is suitable for ear-type hose clamps on fuel, cooling systems and vacuum hoses, and can be used for any strapping with a width of not more than 10mm.. CRAFTS The head of the pliers adopts quenching process, which has better hardness and long service life. The pliers handle adopts non-slip design, it is more powerful to hold.. CLAMPS SIZE Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness.. WHAT YOU'LL GET 1x CV Joint Ear Clamp Banding Tool, 1x CV Boot Clamp Pliers, 12pcs Clamps 6pcs small cv boot bands and 6pcs large cv boot bands, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us.

Universal FitIdeal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars.. With 24PCS CV Boot Clamp 12X small clamps and 12X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp.. High-quality MaterialsThe pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable.. Simple Easy To UseCrimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 12 extension handle or torque wrench.. Package Includes12X Small Clamps, 12X Big Clamps 1X Pliers Tool. The clamp and tool set can be used directly, which is convenient and worry-free..

PREMIUM MATERIALThe CV Boot Clamp Tool are made of high quality 1045 carbon steel. After heat treatment, phosphating and black coloring, has good corrosion resistance, not easy to rust, deformation, sturdy and durable.. ADJUSTMENTSpecifically engineered for closing single ear hose clamp locking straps, and the tool jaw opening can be adjusted.CV axle boot clamp tool is indispensable for automotive maintenance, particularly for dust boot strap removal and installation.. PRODUCT SIZEThe CV boot clamp tool boast adjustable jaw openings, reaching a maximum of 0.71 inches.And included 2 models of single ear clamps, small size 1.2-1.6in 10PCS, large size 2.7-5in 10PCS, can meet most of the needs. EASY TO USECrimp the clamp, then turn the screw to push the crimp to lock in place for easy removal.For smoother operation, apply grease to the screw.. WIDE APPLICATIONThis drive shaft CV axle boot clamping tool fits for locking straps on axle boots compatible with most models.The size and structure perfectly match most single ear hose clamps..

2-Pack CV Joint Boot Clamp Pliers This set includes a CV Joint Ear Clamp Tool and CV Boot Clamp Pliers for easy and efficient tightening of CV boot straps. The clamp tool is perfect for installing CV bands, while the pliers compress and secure lug clamps on CV boots, as well as quick clamps on fuel filters and cooling system hoses.. Ear Type CV Boot Clamps Small size adjusts from 0.78 to 1.96 20-50mm in diameter, with a width of 0.3 8mm and thickness of 0.023 0.6mm. Large size adjusts from 1.96 to 4.72 50-120mm, also with a width of 0.3 8mm and thickness of 0.023 0.6mm.. No-Hole CV Boot Clamps Small size adjusts from 0.98 to 3.35 25-85mm, with a width of 0.275 7mm and thickness of 0.01 0.28mm. Large size adjusts from 1.77 to 7.28 45-185mm, also with a width of 0.275 7mm and thickness of 0.01 0.28mm.. Material CV Joint Boot Clamp Pliers and Boot Banding Tool made from durable pressed steel. Features a non-slip, insulated handle for safety and comfort. The black-coated finish is corrosion-resistant, oil-resistant, and can withstand high temperatures for long-lasting use.. Wide Application Ideal for installing clamps on fuel filters, water pumps, CV joint boots, ATV axle boots, and various cooling system hoses. This CV joint boot clamp plier kit is compatible with most cars.. Package include This set includes 1 CV clamp tool, 1 CV joint boot clamp pliers, 5 large ear-type CV boot clamps, 5 small ear-type CV boot clamps, 5 large no-hole CV boot clamps, and 5 small no-hole CV boot clamps. A total of 22 pieces are included to meet all your daily needs..

Universal Compatibility Specifically designed for CLIC CLIC-R clamps reusable, also fits CV joint boot clamps and other hose clamp types. Effortlessly installs and removes clamps in seconds.. Premium Material Our CV boot clamp tool is forged from high-grade 45 carbon steel with black oxide coating for rust resistance. Heat-treated for enhanced durability in harsh environments.. 2-in-1 Functionality Flip the pliers to switch between clamp removal arrow up and installation arrow down. No extra tools needed. Ergonomic Effortless The radiator hose clamp tool is designed with spring-loaded mechanism, which enables smooth one-handed operation. 7inches length and 1inch max opening ideal for tight spaces.. Safety Comfort The PVC-dipped handles of hose clamp pliers pass ROHS 2.0 and REACH tests. Non-slip grip reduces hand fatigue during long-term use and improves work efficiency..

Universal FitIdeal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp plier fits most of cars.. With 20PCS CV Boot Clamp 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It's perfect for you to replace the car broken drive shaft CV boot clamp.. High-quality MaterialsThe pliers are made of high-quality stainless steel as a whole, which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. The clamp head undergoes a quenching process for higher hardness. Equipped with an ergonomically designed non-slip insulated handle, it is practical and comfortable.. Simple Easy To UseCrimp the clamp and then push down on the crimp to lock into place. It's a good partner of a 12 extension handle or torque wrench.. Package Includes10X Small Clamps, 10X Big Clamps 1X Pliers Tool. The clamp and tool set can be used directly, which is convenient and worry-free..

High-qualityCV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots.. 2 Pcs CV Joint Boot Clamp Pliers The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.. 24 Pcs CV Boot ClampStable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle.. Package Included1CV Clamp Tool,1CV Joint Boot Clamp Pliers,12Small CV Boot Clamps,12Large CV Boot Clamps. CV Joint Ear Clamp Banding Tool Boot Crimp Pliers The CV joint boot clamps pilers are newly.AKA cv Clamp Band,cv Clamp Pliers,cv Clamp Tool,cv Boot Clamp Pliers,cv,Boot Clamp Kit,cv Boot Clamp Tool,cv Boot Clamp Pliers For Atv,cv Boot Tool Kit,cv Boot Tools,cv Joint Boot Clamp Pliers Kit,cv,Joint Boot Clamp Pliers,cv Boot Banding Tool,cv Joint Band Clamp Tool,cv Joint Clamp Tool.

Package Includes - CV boot clamp kit has a simple package, it contains 1PCS of CV boot clamp pliers, 5PCS of small clamps and 5PCS of large clamps. These car accessories are in sufficient quantity to meet the needs of daily use. The tools are carefully placed inside the package to ensure that they will not be lost.. Adjustable CV Boot Clamp - CV boot tool is equipped with adjustable ball cage clamps to make it more versatile. You can adjust the size of the ball cage clamp as needed to accommodate different sized hoses. Whether it is a smaller ball cage or a larger one, this design provides a solid and reliable hold.. Quality Clamp Pliers - CV axle boot tool is forged from premium steel and heat-treated for superior durability, the rigid design makes it easy to secure hoses, and the handles are ergonomically designed with non-slip material to provide you with a superior tactile sensation and more stable operation during use.. Application Scope - This automotive CV boot pliers is 9.25 overall length, 1.5 jaw width, large clamp ID range 50-120 mm, small clamp ID range 25-50 mm. Widely used in most cars, trucks and SUVs fuel filters, water pumps, isotropic gimbal shingles, ATV axle shaft shingles, and other cooling system hose clamps.. Easy to Use - The CV boot clamp tool is very easy to use with its small size and high torque. Using the ear clamp pliers is accomplished in a few simple steps, i.e., holding the clamp, adjusting the size of the cage clamp, and then placing it into the desired position and securing it. You save time and effort..

Package included 1pc hose clamp pliers, 5pcs small CV Boot Clamps 20-50mm, 5pcs large CV Boot Clamps 50-120mm.. CV boot clamp is made of 304 stainless steel with adjustable length, which can be used to replace the CV sheath clamp of damaged transmission shaft of automobile.. The hose clamp pliers forged from premium steel and heat-treated for superior durability, the rigid design makes it easy to secure hoses.. Easy to use, remove the old clamps, clean up the grease, and put the new clamps on. Good as new. No need to spend a fortune on new CV axles.. Suitable for most cars, for clamping and fixing the hoop of automobile ball cage Mainly used for installing clamps on fuel filters, water pumps, constant velocity universal joint shoes, ATV axle shoes and other cooling system hoses..

Product Size The CV Boot Clamp Kit includes 24 stainless steel clamps 12 large and 12 small, offering a variety of sizes to meet different CV boot securing needs. 12 pcs small clamps 31.81mm 1.252-41.1mm 1.618 and 12 Pcs large clamps 69.79mm 2.747-127.12mm5.004. High-Quality Made from high-quality stainless steel, this kit provides excellent durability and corrosion resistance. It can withstand harsh driving conditions and environmental factors, ensuring long-lasting protection for CV boots. Quick Easy Installation No special expertise is required. Simply open the clamp, wrap it around the CV boot, and then crimp it securely to keep the boot tightly sealed and in place. The clamps are adjustable, allowing for a tight and secure fit on various CV boot dimensions. Wide Application The CV Boot Clamp tool is suitable for a wide range of vehicles, including cars, trucks, and SUVs. It can be used to repair or replace worn or damaged CV boot clamps, making it a universal solution for CV joint protection. Durable Protection By using this CV Boot Clamp Kit, you can effectively prevent contaminants from entering the CV joints and keep lubricating grease from leaking. This helps to extend the life of CV joints and drive axles, ensuring reliable vehicle performance and reducing the risk of drivetrain issues.

22-Piece CV Joint Boot Clamp Pliers Kit Belong to Universal Fit.. CV Joint Boot Clamp Pliers Kit Fits most of Cars.Be Used for Installing Clamps On Fuel Filters, Water Pumps, CV joint Boots,ATV Axle Boot Other Cooling System Hoses.. CV Joint Clamp Tool For Installing CV Clamping Bands.CV Boot Clamps Material Stainless Steel,With High Toughness Adjustable Length.For You To Replace The Car Broken Drive Shaft CV Boot Clamp.. CV Boot Clamp Pliers For Compresses flattens the lug clamps on the CV boot and installs quick clamps on the fuel filter and cooling system hoses.. CV Clamp Tool Material Carbon steel.Process Steel forgingCarburizing Heat TreatmentBlack antirust coating,An Ergonomically Designed Non-slip Insulated Handle, Practical Comfortable less user fatigue.. CV Joint Boot Clamp Pliers Material 40CR Steel.Process Steel forgingHeat Treatment HRC45Black antirust coating,An Ergonomically Designed Non-slip Insulated Handle, Practical Comfortable less user fatigue.. Boot Clamp Pliers1PCS.Joint Ear Clamp Banding Tool1PCS.Small Clamps10PCS .Big Clamps10PCS Tool Kit1PCS.Joint Ear Clamp Banding TooJoint Ear Clamp Banding ToolClamps Stored in the tool kit, Easy To Keep and Carry..

22-Piece CV Joint Boot Clamp Pliers Kit Belong to Universal Fit.. CV Joint Boot Clamp Pliers Kit Fits most of Cars.Be Used for Installing Clamps On Fuel Filters, Water Pumps, CV joint Boots,ATV Axle Boot Other Cooling System Hoses.. CV Joint Clamp Tool For Installing CV Clamping Bands.CV Boot Clamps Material Stainless Steel,With High Toughness Adjustable Length.For You To Replace The Car Broken Drive Shaft CV Boot Clamp.. CV Boot Clamp Pliers For Compresses flattens the lug clamps on the CV boot and installs quick clamps on the fuel filter and cooling system hoses.. CV Clamp Tool Material Carbon steel.Process Steel forgingCarburizing Heat TreatmentBlack antirust coating,An Ergonomically Designed Non-slip Insulated Handle, Practical Comfortable less user fatigue.. CV Joint Boot Clamp Pliers Material 40CR Steel.Process Steel forgingHeat Treatment HRC45Black antirust coating,An Ergonomically Designed Non-slip Insulated Handle, Practical Comfortable less user fatigue.. Boot Clamp Pliers1PCS.Joint Ear Clamp Banding Tool1PCS.Small Clamps10PCS .Big Clamps10PCS Tool Kit1PCS.Joint Ear Clamp Banding TooJoint Ear Clamp Banding ToolClamps Stored in the tool kit, Easy To Keep and Carry..

Strong DurableMade of high-quality stainless steel material, CV boot clamp pliers is solid and durable. Pliers constructed from pressed steel with the black-coated finish is safe and strong. This tool is essential for fixing CV boots.. Ergonomic DesignPliers with jaws and formed handles is comfort when use, less user fatigue, and more productivity. The lightweight and compact design also makes it easy to carry with you.. Wide ApplicationCV boot clamp pliers set is ideal for installing clamps on fuel filters, water pumps, CV joint boots, ATV axle boot and other cooling system hoses. It is essential for repairing cars.. Easy To UseWith a built in cutter and winding mechanism, the banding can be tightened and cut quickly and effectively. The clamp and tool set can be used directly, which is convenient and worry-free.. Package ContentYou will get 4pcs small CV boot clamps height 7mm, 4pcs large CV boot clamps height 9mm, and 2pcs CV joint boot clamp pliers. The CV boot clamp pliers can meet all your different Daily needs..

HIGH PERFORMANCEThe steel belt flanging process effectively solves the problem of steel belt burrs scratching the pipe surface and increases the strength of the steel belt. The screws and nuts of the products are carefully selected and are not easy to slip or break. The thread texture is clear, the thread is deep and long, it is not easy to slip, has good anti-slip properties, and can be reused.. CAN ADJUSTCV boot tool is equipped with adjustable ball cage clamps to make it more versatile. You can adjust the size of the ball cage clamp as needed to accommodate different sized hoses.With a protective black coating design, ensuring resilience, corrosion resistance, and long-term performance.. FOR CAR REPAIRThe set features an integrated cutter and winding mechanism for precise, effective tightening and cutting hose clamps, streamlining automotive maintenance tasks. Whether it is a smaller ball cage or a larger one, this design provides a solid and reliable hold.. Easy InstallationFirst, remove the old cv boot clamps. Then clean off the grease and dirt. Finally, put the new cv boot clamps on, and then just lock and tighten them. The plier can clamp and fix the hoops of the car's ball joint. Widely used in most cars, trucks and SUVs fuel filters, water pumps, isotropic gimbal shingles, ATV axle shaft shingles, and other cooling system hose clamps.. WITH CV BOOT CLAMPSWIth 10pcs5set CV boot clamps. Applied to stainless steel, hoses, gas pipes, ships, chemicals, etc. Suitable for automobilesshipsmachine toolselectricitycommunicationsconstructionfirefightingdaily life. It has the characteristics of high strength, pressure resistance, stable quality and long service life..

CV Boot Clamp Pliers Set CV boot clamp tool can be used with any strapping that does not exceed 25 inches 10mm in width. Suitable for ear type hose clamps on fuel hoses, cooling systems, and vacuum hoses.. Versatile Usage This 2pcs CV Joint Boot Clamp Pliers Set is designed to securely fasten and flatten clamps on ear-type CV joint boot clamps. Additionally, it can also be used for securing late model GM CVJ boot clamps, providing a practical solution for various automotive repair needs.. Reliable and Effective Constructed from pressed steel with a black-coated finish, these pliers are built to last and withstand rigorous use. The built-in cutter and winding mechanism allow for quick and efficient tightening and cutting of the strapping, ensuring a secure and reliable hold.. Wide Compatibility Suitable for ear-type hose clips found on fuel, cooling system, and vacuum hoses, these CV boot clamp pliers offer versatile compatibility, making them an essential tool for any automotive enthusiast or professional mechanic.. User-Friendly Design The cv boot clamp pliers are equipped with non-slip rubber handles, providing a comfortable and secure grip during use. This ergonomic design helps reduce user fatigue, allowing for prolonged and efficient work..

OTC's Ear Type CV Boot Clamp Pliers are designed to crimp the ear-type CV boot clamps used on most Cars, Trucks, SUV's, Vans and off-road vehicles that use CV boots. May also be used to crimp the type of clamps used on fuel and cooling system hoses. Ensures even, precise crimping for a tight, leak-proof seal. Using the correct tool reduces the possibility of damage to the clamp, boot, or hose. High-grade materials ensure quality performance over the lifetime of the tool.

Designed to clamp the ear-type CV boot clamps used on front-wheel drive vehicles. May also be used to crimp the clamps used on fuel and cooling system hoses. Ensures even precise crimping and eliminates possibility of damage to the clamp boot or hose.

Special tips work on the ear-less type CV boot clamps. Grips clamp in many positions to tighten clamp around boot.

Diameter Range 1 to 5. Stainless Steel Band. Width 0.25 x Thickness 0.010. Use Interstate Pneumatic H13 CV Joint Crimper to fasten lock this hose clamp on the Drive CV axle joints. Durable Strength Professional Grade 10Pack.

For all ear-type clamps including GM FWD outboard CV joints.. Designed for use with a torque wrench, as required for stainless steel bands.. Item Package Dimension 10.43L x 5.71W x 1.1H inches. Item Package Weight - 1.2 Pounds. Item Package Quantity - 1. Product Type - PLIERS.

Crimps joints while with center pushing feature. Use 12 drive ratchet or torque wrench.

Material CV Joint Boot Clamp Pliers And CV Boot Banding Tool constructed from pressed steel,Equipped with non-slip insulated handle,Safe,comfortable and durable.black-coated finish,corrosion-resistant, oil-resistant, high-temperature resistant,and has a long service life.. Suitable CV Axle Boot Clamp Kit Suitable for any banding up to 25 inch 10mm in width,for example most of cars ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.. Simple Easy To UseThe 2pcs CV joint boot clamps pliers car With a built-in cutter and winding mechanism ,can be tightened and cut quickly and effectively.. Cv Boot Tool 5Pcs Small CV Boot Clamps and 5Pcs Large CV Boot Clamps,Used for securing Your ATV UTV CV boot clamps,or can meet your different Daily needs.And a pair of gloves for protecting your hands.. Package includes1Pcs CV Boot Banding Tool 1Pcs Boot Clamp Pliers 5Pcs Small CV Boot Clamps and 5Pcs Large CV Boot ClampsThe CV Boot Tool kit All goods are stored in the tool kitEasy To Keep and Carry..

Material Crafted from high quality 304 stainless steel, our CV boot clamp offers excellent corrosion resistance and robust rust resistance. This ensures that the cv axle boot clamp remains hard and sturdy, providing a reliable solution. Versatile Size Our CV boot clamps are available in two adjustable sizes small clamps fitting diameters from 0.78-1.96 inches20-50mm, 0.275 7mm in width and 0.023 0.6mm in thickness Large clamps ranging from 1.96-4.72 inches50-120mm, 0.354 9mm in width and 0.031 0.8mm in thickness This versatility ensures a nice fit for various CV axle boot repair kit requirements. Easy Installation Engineered for user convenience, these CV boot clamps are easy to install, suited for both left and right, as well as front and rear CV joints. Function Our CV boot clamps are designed to be applied on drive and CV axle, making them a perfect replacement for broken drive shaft CV boot clamps This adaptability ensures wide-ranging applicability, providing solutions tailored to diverse maintenance needs. Comprehensive Package The package includes a total of 40 pieces, comprising 20 small CV boot bands and 20 large CV boot bands This generous provision allows for extensive applications, making it an ideal choice for both personal and professional automotive projects, maintaining readiness for any CV boot clamp repair.

Universal Fit The 22-piece CV joint boot clamp pliers kit belongs to universal fit. Ideal for installing clamps on fuel filters, water pumps, CV joint boots, ATV axle boots and other cooling system hoses. This CV joint axle boot clamp plier fits most cars.. With 20PCS CV Boot Clamp 10 pieces of small clamps and 10 pieces of big clamps are included. Made of stainless steel, with high toughness and adjustable length, perfect for you to replace the car broken drive shaft CV boot clamp.. With 2Pcs CV Joint Boot Clamp Pliers This set contains both a CV Joint Ear Clamp Banding Tool and CV Boot Clamp Pliers, which are designed for fast and simple tensioning and securing of CV boot banding strap. The joint clamping tool is an effective tool for installing CV clamping bands.. High-quality Materials The CV boot banding tool is constructed from durable stainless steel, offering corrosion, oil, and high-temperature resistance. With a black-coated finish and ergonomically designed non-slip insulated handles, the tool ensures comfortable and long-lasting use under various conditions.. Package Includes Rare 22-piece CV Joint Axle Boot Clamp Pliers Tool on the market 10 X Small Clamps, 10 X Big Clamps, 1 X CV Joint Ear Clamp Banding Tool and 1 X CV Boot Clamp Pliers. The clamp and tool set can be used directly. The CV boot clamp Pliers compress and flatten the lug clamps on the CV boot and install quick clamps on the fuel filter and cooling system hoses..

MATERIAL The cv joint clamp is made of high quality 304 stainless steel, have good corrosion resistance, strong rust resistance, hard and sturdy.. PRODUCT SIZE Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness.. WIDE APPLICATION Used on drive CV Axle, work well with your cv boot kit such as atv's and utv's cv boots. A perfect replacement for your loose or broken cv boot clamp.. SIMPLE TO USE Remove the old cv boot clamps, clean up the grease, and put the new clamps on, and then just lock and fasten. You can install it in a few minutes.. PACKAGE INCLUDED 12pcs small cv boot bands and 12pcs large cv boot bands, same as the pictures, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us.

MaterialHigh-quality non-magnetic Stainless Steel. Solid and Durable.. FunctionUse on Drive CV Axle. They are good for you to replace the car broken drive shaft CV boot clamp.. CompatibleAdjustable PerimeterHeight 315-415mm9mm, 142mm-176mm7mm.. InstallationGood Working Condition and Easy to Install. Placement on Vehicle Left , Right, Front and Rear.. Package6 Pcs Small CV Boot ClampsHeight 7mm, 6 Pcs Large CV Boot ClampsHeight 9mm..

FitmentCV Joint Banding Boot Axle Clamp Tool only suitable for mounting CVT joint boots, ATV axle boot, AutoATV.. With 20 PCS CV Joint Boot Clamp SetIncludes 10 X small clamps 9.8 inch and 10 X large clamps 19.7 inch. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the desired length and get tighter with each pull. If you need to cut off the excess, you must use the CV Boot Joint Ear Clamp Banding Tool to do so.. With CV Joint Ear Clamp Banding Tool This set of CV Joint Ear Clamp Banding Tool is newly designed to tighten and cut straps quickly and efficiently, with built-in cutters and winders.Auto ATV CV Joint Banding Boot Axle Clamp Tool's clamps are made of black coated stamped steel, which looks shinier and is completely rust and corrosion resistant.. High-quality MaterialsThis set of CV Joint Banding Boot Plier Tool is made of quality stainless steel throughout, which is corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness. Equipped with ergonomically designed non-slip insulated handles, allowing you to get the job done comfortably and efficiently.. Package IncludesA rare 21-piece CV Joint Banding Boot Plier Tool on the market. 10 X small clamps, 10 X large clamps, and 1 CV Boot Clamp Banding Tool. This set allows for comfortable and effective professional CV transmission repair..

For Car RepairThe set features an integrated cutter and winding mechanism for precise, effective tightening and cutting hose clamps, streamlining automotive maintenance tasks. Whether it is a smaller ball cage or a larger one, this design provides a solid and reliable hold.. Durable and AujstableCV boot clamp tool is equipped with adjustable ball cage clamps to make it more versatile. You can adjust the size of the ball cage clamp as needed to accommodate different sized hoses.With a protective black coating design, ensuring resilience, corrosion resistance, and long-term performance.. High PerformanceThe steel belt flanging process effectively solves the problem of steel belt burrs scratching the pipe surface and increases the strength of the steel belt. The screws and nuts of the products are carefully selected and are not easy to slip or break. The thread texture is clear, the thread is deep and long, it is not easy to slip, has good anti-slip properties, and can be reused.. Wide ApplicationYou will get 1pc CV boot clamp plier, 10pcs CV boot clamps. The plier can clamp and fix the hoops of the car's ball joint. Widely used in most cars, trucks and SUVs fuel filters, water pumps, isotropic gimbal shingles, ATV axle shaft shingles, and other cooling system hose clamps.. With CV Boot ClampsWIth 10pcs5set CV boot clamps. Applied to stainless steel, hoses, gas pipes, ships, chemicals, etc. Suitable for automobilesshipsmachine toolselectricitycommunicationsconstructionfirefightingdaily life. It has the characteristics of high strength, pressure resistance, stable quality and long service life..

Heavy Duty CV Boot Clamp Pliers Created for securely fitting ear-type clamps, especially the sturdy stainless steel ones that need higher compression force.. Heavy duty 45 steel construction with chrome vanadium steel jaws and comfortable rubber handle. Total length 11 inch 278 mm, Max jaw capacity 1.78 inch 45 mm.. The 38 inch Torque Drive Socket is perfect for precisely fitting high-strength stainless steel clamps on modern vehicles, compatible with Ford, VAG, Vauxhall, Opel, and others, where a specific torque setting typically 23-30 Nm is crucial.. When exact torque settings aren't necessary, this tool can also be operated manually using a 38 drive standard ratchet or flexible handle bar.. The two-way jaw design expands access points for clamp tightening, particularly helpful in tight suspension and driveshaft spaces..

Crimping Plier Tool Heavy-duty Ear Clamp Pincer equipped with front steel jaw and non-slip grip handles which is convenient for your installation, widely applied to single ear hose clamps, double ear clamps. Ideal for installing band style boot clamps on fuel filter, water pumps, cv joint boots, ATV axle boot, steering racks, drive shafts and other cooling system hoses. The thin head design permits good accessibility in confined areas and will not damage the press points on the ear clamps.. CV Joint Clamp Banding Tool Made of high quality steel, use with banding straps up to 10mm 0.39in wide, 0.6mm0.02in thick, with a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. NOTE The banding straps are not included, only ear crimp clamps shown in the picture are included. . Material of Ear Clamp The CV boot clamp tool is made of high quality 304 stainless steel that are more salt resistant, anti-rust, anti-corrosion than other 201 stainless steel, Loose or damaged clamp can be harmful to your automobile and create grease spills, the new clamps can help you reseal and fastened to prevent leakage.. Ear Clamp Size Are Adjustable Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness.. Package Included 1Pcs Ear Clamps Pliers, 1Pcs CV Joint Banding Tool with Cutter, 4Pcs Small CV Boot Clamps, 4Pcs Large CV Boot Clamps are included in this kit, same as the pictures..

MATERIAL The axle boot clamps is made of stainless steel material, they are very tough and can lock items very firmly.. WIDE APPLICATION Used on drive CV Axle, work well with your cv boot kit such as atv's and utv's cv boots. Non-porous and double buckle design to prevent loosening or breakage during using.. PRODUCT SIZE Small- Adjust diameter from 1.77-3.14 inch45-80mm, 0.275 7mm in width 0.01 0.28mm in thickness, Large-Adjust diameter from 1.77-6.69 inch45-170mm, 0.275 7mm in width 0.01 0.28mm in thickness.. EASY TO USE The size can be freely adjusted. The locking teeth stop the tie at the desired length and get tighter with each pull. If you need to cut off the excess, you must use the CV Boot Joint Ear Clamp Banding Tool to do that. Note CV Joint Boot Band Tool are not included with this item.. PACKAGE INCLUDED 12pcs small CV joint boot band clamps and 12pcs large CV joint boot band clamps, we focus on customer using experience and try our best to provide the best product and service for our customers, if you have any problems, please feel free to contact us.

Electrical Disconnect Pliers Function Can Removes Locking Push Tab Style Electrical Connectors Found on Mass Air Flow Sensors, Fuel Injectors, Ignition Coils Other Applications. . Electrical Disconnect Pliers Set With 60Pliers and Straight Pliers,60Pliers Convenient For Working In Narrow Spaces Can Deal With Areas That Straight One Cannot Reach.. Electrical Disconnect Pliers Tool Designed 1.Electrical Disconnect Pliers Specifically Designed For Automotive Electrical Connectors ,This Electrical Connector Separator Tool Disconnect Electrical Connectors On Your Wiring Harnesses Without Damaging Them.. 2.Electrical Disconnect Pliers Are Equipped With Anti Slip Grip, Serrated Head, And Spring Support, Making Operation Simple And Efficient, And Convenient For One Handed operation.. 3.Electrical Disconnect Pliers Are Made of High-Quality Carbon Steel And Undergo High-Temperature Forging And Quenching Treatment, Providing Durability And Rust Prevention.. 4.Electrical Disconnect Pliers Feature A PVC Rubber Handle Design That Is Ergonomic, Comfortable To Use, And Has Anti Slip Functionality.. 5.Electrical Disconnect Pliers PVC Rubber Handle Has Insulation Function, Providing An Insulated Working Environment For Vehicle Maintenance, Which Is Conducive To Clamping, Adjusting, Loosening, Pulling Air Flow Sensors, Injectors, Wires, Oil Pipes.. CV Joint Boot Clamp Pliers Kit Fits most of Cars.Be Used for Installing Clamps On Fuel Filters, Water Pumps, CV joint Boots,ATV Axle Boot Other Cooling System Hoses. . CV Joint Clamp Tool For Installing CV Clamping Bands.CV Boot Clamps Material Stainless Steel,With High Toughness Adjustable Length.For You To Replace The Car Broken Drive Shaft CV Boot Clamp.. CV Boot Clamp Pliers For Compresses flattens the lug clamps on the CV boot and installs quick clamps on the fuel filter and cooling system hoses..

Versatile Clamp Sizes The kit includes 10 CV boot clamps, with 5 small clamps adjusting from 1.25-1.62 inches and 5 large clamps ranging from 2.75-5 inches in diameter. These adjustable clamps are made from tough stainless steel, ensuring secure fastening on different CV joint boots.. Efficient Banding Tool Design Equipped with a CV Joint Ear Clamp Banding Tool and Boot Clamp Pliers, this CV axle boot clamp kit offers quick and efficient tightening and cutting of straps. Crafted from high-quality steel, the tool features built-in cutters and a winding mechanism, making it easy to manage and cut off excess material.. Premium Material Construction The CV boot banding tool is constructed from durable stainless steel, offering corrosion, oil, and high-temperature resistance. With a black-coated finish and ergonomically designed non-slip insulated handles, the tool ensures comfortable and long-lasting use under various conditions.. Comprehensive Kit for Various Uses In addition to joint boot band clamps, the package includes a CV boot banding tool. Ideal for securing auto and ATV CV joint boots, fuel filters, and water pumps it offers solutions for both professional mechanics and DIY enthusiasts.. Ergonomic and User-Friendly The automotive CV boot clamp pliers axle boot clamps are designed with user comfort in mind, featuring non-slip insulated handles that reduce fatigue. Suitable for installing CV joint boot clamps, these tools allow efficient compression and flattening of lug clamps for a seamless repair process..

Fits shaft size 19mm-24mm. - Enables the repair of cv joints by replacing old, worn out boots without needing to remove the axle itself. - Specially Formulated, Highly Flexible Durable so it can be installed with the use of a Pneumatic CV Boot Installer, an Installation cone or the Traditional Way. - Save Time and Money as compared to an axle replacement.. - Ideal for Preventative Maintenance that keeps the vehicle in its OE State.

CAN ADJUSTCV boot tool is equipped with adjustable ball cage clamps to make it more versatile. You can adjust the size of the ball cage clamp as needed to accommodate different sized hoses.With a protective black coating design, ensuring resilience, corrosion resistance, and long-term performance.. HIGH PERFORMANCEThe steel belt flanging process effectively solves the problem of steel belt burrs scratching the pipe surface and increases the strength of the steel belt. The screws and nuts of the products are carefully selected and are not easy to slip or break. The thread texture is clear, the thread is deep and long, it is not easy to slip, has good anti-slip properties, and can be reused.. FOR CAR REPAIRThe set features an integrated cutter and winding mechanism for precise, effective tightening and cutting hose clamps, streamlining automotive maintenance tasks. Whether it is a smaller ball cage or a larger one, this design provides a solid and reliable hold.. WIDE USE RANGEYou will get 1pc CV boot clamp plier,5set CV boot clamps. The plier can clamp and fix the hoops of the car's ball joint. Widely used in most cars, trucks and SUVs fuel filters, water pumps, isotropic gimbal shingles, ATV axle shaft shingles, and other cooling system hose clamps.. WITH CV BOOT CLAMPSWIth 10pcs5set CV boot clamps. Applied to stainless steel, hoses, gas pipes, ships, chemicals, etc. Suitable for automobilesshipsmachine toolselectricitycommunicationsconstructionfirefightingdaily life. It has the characteristics of high strength, pressure resistance, stable quality and long service life..

HIGH PERFORMANCEThe steel belt flanging process effectively solves the problem of steel belt burrs scratching the pipe surface and increases the strength of the steel belt. The screws and nuts of the products are carefully selected and are not easy to slip or break. The thread texture is clear, the thread is deep and long, it is not easy to slip, has good anti-slip properties, and can be reused.. CAN ADJUSTCV boot tool is equipped with adjustable ball cage clamps to make it more versatile. You can adjust the size of the ball cage clamp as needed to accommodate different sized hoses.With a protective black coating design, ensuring resilience, corrosion resistance, and long-term performance.. FOR CAR REPAIRThe set features an integrated cutter and winding mechanism for precise, effective tightening and cutting hose clamps, streamlining automotive maintenance tasks. Whether it is a smaller ball cage or a larger one, this design provides a solid and reliable hold.. WIDE USE RANGEYou will get 1pc CV boot clamp plier,5set CV boot clamps. The plier can clamp and fix the hoops of the car's ball joint. Widely used in most cars, trucks and SUVs fuel filters, water pumps, isotropic gimbal shingles, ATV axle shaft shingles, and other cooling system hose clamps.. WITH CV BOOT CLAMPSWIth 10pcs5set CV boot clamps. Applied to stainless steel, hoses, gas pipes, ships, chemicals, etc. Suitable for automobilesshipsmachine toolselectricitycommunicationsconstructionfirefightingdaily life. It has the characteristics of high strength, pressure resistance, stable quality and long service life..

PRODUCT SIZE The CV boot clamp tool boast adjustable jaw openings, 10PCS Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, 10PCS Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness. USEFUL TOOL This CV boot clamp pliers is perfectly used to closing the locking straps of single ear hose clamps, and its specially used to remove and install the locking straps on the automobile dust boot. EASY TO USE The drive shaft clamping tool is perfectly designed to help you quickly and undamaged remove and install the locking strap on the dust boot Crimp the clamp, then turn the screw to push the crimp to lock in place Grease the screw to make it work more smoothly. KIT INCLUEDS CV boot clamp pliers x 1, large clamps x 10, small clamps x 10, a pair of gloves x 1. AFTER-SALES DESCRIPTION If you have any questions about the purchased tool, please contact us in time, customers satisfaction is our top priority.

PRODUCT SIZE Small- Adjust diameter from 0.78-1.96 inch20-50mm, 0.275 7mm in width 0.023 0.6mm in thickness, Large-Adjust diameter from 1.96-4.72 inch50-120mm, 0.354 9mm in width 0.031 0.8mm in thickness. USEFUL TOOL Remove the old cv boot clamps, clean up the grease, and put the new clamps on, and then just lock and fasten You can install it in a few minutes. WIDE APPLICATION Used on drive CV Axle, work well with your cv boot kit such as atv's and utv's cv boots A perfect replacement for your loose or broken cv boot clamp. PREMIUM MATERIAL This 24pcs cv joint clamp is made of high quality 304 stainless steel, sturdy and stability, corrosion resistant, wear resistant, with reliable use and long service life. AFTER-SALES DESCRIPTION If you have any questions about the purchased tool, please contact us in time, customers satisfaction is our top priority.

PRODUCT SIZE The jaw opening of the single ear hose clamp pliers can be adjusted freely, the maximum opening length can reach 20mm0.78inch, by rotating the 13mm0.5inch screw.. EASY TO USE The drive shaft clamping tool is perfectly designed to help you quickly and undamaged remove and install the locking strap on the dust boot. Crimp the clamp, then turn the screw to push the crimp to lock in place. Grease the screw to make it work more smoothly.. EXCELLENT DESIGN This CV axle boot clamp tool is perfectly used to closing the locking straps of single ear hose clamps, and its specially used to remove and install the locking straps on the automobile dust boot.. WIDE APPLICATION This drive shaft CV axle boot clamping tool fits for locking straps on axle boots compatible with Toyota Lexus, and most other models. The size and structure perfectly match most single ear hose clamps.. PREMIUM MATERIAL This drive shaft clamping tool is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and steady, phosphating and black coloring, corrosion resistant, wear resistant, with reliable use and long service life..

Hose Clamp Pliers SizeLength 8.46 inch215mm.Max Opening Size1.38inch35mm .Product MaterialsMade of Carbon Steel and PVC.. Hose Clamp Pliers FunctionCan Quickly and Effectively Disassemble and Install Flat or Circular Hose Clamps.. Product DesignThe Handle Adopts PVC aAnti Slip and Locking Design, Increasing Grip and Comfort.The Rotatable Fixture Tip Can Be Used For Multi Angle Operation, Making It Convenient To Work In Narrow Spaces.. Clic-R Type Pliers SizeLength 7 inch177mm.Max Opening Size1inch25mm .Product MaterialsMade of Forged Steel and Coated with Manganese Phosphate cCoating, Effectively Preventing Rust.. Clic-R Type Pliers FunctionCapable of Quickly Installing and Disassembling Clic and Clic R Hose Clamps. Widely suitable For European Vehicles With CV Ear Type Clamps Reusable Clic-R Hose Clamp.. Product DesignLoading Spring Design, Self Opening Handle Function For Spring lLoading, Convenient For One Handed Operation.Anti Slip PVC Handle Ensures Stable Grip and Reduces Fatigue During Long-Term Operation.. CV Joint Boot Clamp Pliers Kit Fits most of Cars.Be Used for Installing Clamps On Fuel Filters, Water Pumps, CV joint Boots,ATV Axle Boot Other Cooling System Hoses.. CV Boot Clamp Pliers For Compresses flattens the lug clamps on the CV boot and installs quick clamps on the fuel filter and cooling system hoses.. CV Joint Clamp Tool For Installing CV Clamping Bands.CV Boot Clamps Material Stainless Steel,With High Toughness Adjustable Length.For You To Replace The Car Broken Drive Shaft CV Boot Clamp. . CV Joint Boot Clamp Pliers Material 40CR Steel.Process Steel forgingHeat Treatment HRC45Black antirust coating,An Ergonomically Designed Non-slip Insulated Handle, Practical Comfortable less user fatigue.CV Clamp Tool Material Carbon steel.Process Steel forgingCarburizing Heat TreatmentBlack antirust coating..

Makes Changing Boots Painless Changing a bad boot can save your axle. But its a real pain in the butt if you dont have the right tool. Pick up a pair of SuperATV's CV Boot Clamp Pliers to make installing and removing your clamps easy.. Built for UTV Boot Clamps The rubber handled steel pliers are built for UTV boot clamps so you can make your repairs and get back on the trail.. A Must Have for Every Rider's Toolbox This CV Boot Clamp tool has a 12 tooth width.. SuperATV is all about innovatingpushing the envelope, thinking outside the box, bringing new ideas to the table, however you want to say it.. We currently offer thousands of different parts and accessories, all designed to make your ride better..

Easy to operateNewly upgraded CV boot clamp plier kit, specifically designed for universal joint boot maintenance and repair, includes CV boot clamp plier with 20 Crimp Bands.. Non-slipcv boot clamp handles feature a dual-layer dip-coated anti-slip textured surface treatment, ensuring a secure grip during use for effortless installation of universal joint boot clamps.. ApplicableThe pliers kit for installing clamps on fuel filters, water pumps, constant velocity universal joint shoes, ATV axle shoes and other cooling system hoses.. Package Includes plier set includes 1 x cv boot clamp plier, 10 x large clamps 50-120 mm, and 10 x small clamps 20-50 mm.. ServiceWe prioritize delivering professional service to guarantee your satisfaction. If you have any questions or concerns, please don't hesitate to contact us via email. We are committed to providing the best solutions and support to our customers..

Perfect CV Joint Banding Tool for fast tensioning and securing of CV joint boot banding strap.. CV joint boot clamp wrench with high quality steel help you install the CV joint boot easily. Clamp free end of 38 or 14 reel of strap around boot thread strap through clevis head and reel mandrel slot place 12 ratchet on reel bend back of strap on boot and clip on to apply tension and cut off fold remaining strap end into clip and tap down on clip ears to secure double wrap for added strength. Equipped with a straight crimping clamp at the end, this CV boot crimps the clamp lugs to greatly prevent leakage.. The CV Boot Clamp Pliers for Ear-Type Clamp Crimping or Removal on for Audi, VW, BMW, Mercedes, Honda, Mazda Vehicles to crimp and flatten the clamp on Ear-Type constant velocity joint boot clamps,also be used for securing ATV UTV boot clamps..

Application CV boot clamp tool Fits off locking straps on axle boots Compatible with ToyotaLexus, the size and structure perfectly match the model requirements,perfect to close the locking bands for Toyota axle boots,CV axle boot clamp tool is compatible with ToyotaLexus and most other models.. Quality The drive shaft clamping tool is made of high-quality alloy 42CRMO steel with high hardness, and its screws are 10.9-level strong, making it more sturdy and durable. which is more sturdy.which is durable, corrosion-resistant, oil-resistant, high-temperature resistant, and has a long service life. Great for replacing your car's damaged driveshaft CV boot clip.. Flexible Adjustment CV Joint Boot Clamp PliersThe jaw opening of the hose clamp pliers automotive can be adjusted freely, just by rotating the 13mm screw, the maximum jaw opening length can reach 20mm0.78inch.. Operation Crimp the clamp, then turn the screw to push the crimp to lock in place for easy removal.. Service ZKTOOL is a company specializing in special tools. Each of our tools meets the requirements of the model. If you have any questions, please contact us..

SuitableCV Joint Boot Clamp Pliers Kit Suitable for any banding up to 25 inch 10mm in width,for example most of cars ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.. Material CV Boot Clamp Pliers Tool constructed from pressed steel,An Ergonomically Designed Non-slip Insulated Handle,Safe,comfortable and durable.black-coated finish,corrosion-resistant, oil-resistant, high-temperature resistant,and has a long service life.. Easy To UseThe 2pcs CV joint boot clamps pliers car With a built-in cutter and winding mechanism ,can be tightened and cut quickly and effectively.. How to useWrap free-end clamps 38-inch or 14-inch roll band and clip around bootTighten the band by turning the handle on the tool. When sufficient tension has been applied, rotate the tool over the boot, bending the band back onto the clipflipping the lever at the front of the tool forward, use built-in cutter Cut the band to the correct lengthTo complete clamping, fold down the remaining tail of the band into the clip and secure it by tapping down the ears of the clip.. Packaging includesCV Joint Boot Clamp Pliers 1CV Boot Banding Tool1,Small CV Boot Clamps 5,Large CV Boot Clamps5,Rubber gloves1. Stored in a tool kit, beautiful and easy to carry.

WHAT YOU WILL GET The package includes a set of 10 universal shaft CV joint boot crimp clamps. 5 small clamps measure 31.75mm 1.250 - 41.02mm 1.620. 5 large clamps measure 69.85mm 2.750 - 127.00mm 5.000. There is enough to meet all your daily needs.. STAINLESS STEEL The cv joint clamp is made of very durable stainless steel material, which has excellent hardness and corrosion resistance. It will not rust or get damaged even in a wet environment for a long time. It is very stable, safe and reliable and will not cause any damage to your vehicle.. PRACTICAL It is common for inner or outet CV joints on most cars and light commercial vehicles. Perfect to replace those loose or damaged parts and effectively prevent grease spillage. A high quality auto parts can save you a lot of repair cost and time.. EASY TO INSTALL First, remove the old cv boot clamps. Then clean off the grease and dirt. Finally, put the new cv boot clamps on, and then just lock and tighten them. We use high quality automotive grade raw materials and manufacturing processes to ensure it is the perfect replacement for your old clamps.. WORRY FREE Our products are shipped from the US warehouse. If the products you receive have any quality problems, you can return or exchange them. If you have any questions, please feel free to contact us, we will reply as soon as possible..

HIGH QUALITY The cv boot clamps is made of non-magnetic 304 stainless steel for long durability and reliability.. APPLICATION It can be used on drive CV Axle. A perfect replacement for your car broken drive shaft CV boot clamp.. Size Large-Width 0.352 8.95mm,Thickness 0.033 0.85mm, Small-Width 0.273 6.94mm,Thickness 0.023 0.58mm.. Easy Installation Easy to Install. Suitable for left , right, front and rear CV joints on most cars and light commercial vehicles.. WHAT YOU'LL GET 12 Pcs Small CV Boot Clamps 12 Pcs Large CV Boot Clamps, Place order with 100 confidence, we provide 1 click refund for our valued customers in 3month. Please feel free to contact us if you have any questions and we are always stand by your side to solve your problems..

1, Brand Advantage ----- Join the 5 million Customers powered by our leading Product and Service. CV Boot Clamps are High-quality non-magnetic Stainless Steel material , Solid and Durable. Pliers constructed from pressed steel with the black-coated finish. Safe and durable. This tool is essential for fixing CV boots.. 2, With 8Pcs CV Boot Clamp ----- Stable characteristics, high reliability. Loose or damaged parts can be harmful to your automobile and create grease spills, so a new one helps to correct any issues, Use safe material and will not do harm to your vehicle.. 3, With 2Pcs CV Joint Boot Clamp Pliers ----- The 2pcs CV joint boot clamps pliers car banding tools kit setfor fast and simple tensioning and securing of CV boot banding strap. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. This tool is essential for fixing CV boots. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity.. 4, Easy To Use ----- Wrap free-end clamps 38-inch or 14-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 12-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and use cutter pliers.. 5, What You Get ----- In this kit, You will get 4Pcs Small CV Boot ClampsHeight 7mm, 4 Pcs Large CV Boot ClampsHeight 9mm, 2Pcs CV Joint Boot Clamp Pliers In total 10Pcs in a box, can meet all your different Daily needs..

The CV Boot Clamps are made of premium stainless steel for durable use.. UTSAUTO CV Joint Boot Clamps CV boot bands Set of EIGHT Clamps-Enough to replace all the clamps on all four boots on your front CV axles-Fits most cars.. No more guessing just lock and fasten.. Remove the old cv boot clamps, clean up the grease, and put the new clamps on. Good as new. No need to spend a fortune on new CV axles.. Adjustable Diameter 4 25-45mm, 4 60-120mm.