DEPENDABLE STRENGTH This trailer hitch is rated for 7,000 lbs. gross trailer weight and 700 lbs. tongue weight limited to lowest-rated towing component. VERSATILE DESIGN This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver not compatible with vertical hanging bikes bike racks that require the bikes to be hung mounted vertically. FULLY TESTED Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling. RUST, CHIP, UV-RESISTANT This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays. EASY TO INSTALL This hitch offers a custom, factory fit on select model years of the Tacoma.

Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight. Engineered with a vehicle-specific design for a custom fit. Concealed main body for OE look and seamless integration with the vehicle. Tested for safety in accordance with SAE J684. Precisely welded for superior strength and fit.

DEPENDABLE STRENGTH This adjustable RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight, limited to the lowest-rated towing component, RV frame capacity and vehicle manufacturers stated limits.. VERSATILE DESIGN This camper trailer hitch adds a standard 2-inch x 2-inch receiver to compatible RV, camper and motorhome frames for towing accessories, cargo carriers, trailers or small vehicle towing not rated for weight distribution use.. EASY TO INSTALL Three-piece adjustable design fits RV frames up to 72 inches wide and secures with included grade-8 hardware measure your RV frame width and confirm frame suitability before ordering or installation.. FULLY TESTED CURT RV hitch designs are tested according to SAE J684 standards for towing safety and reliability, with welded safety chain loops for properly connecting trailer safety chains.. RUST, CHIP, UV-RESISTANT This RV towing hitch is protected with rust-resistant liquid A-coat and durable gloss black powder coat for long-term resistance to corrosion, chipping and UV exposure not compatible with vertical hanging bike racks..

DEPENDABLE STRENGTH This trailer hitch is rated for 5,000 lbs. gross trailer weight, 500 lbs. tongue weight, 6,000 lbs. weight distribution capacity and 600 lbs. weight distribution tongue weight limited to lowest-rated towing component. VERSATILE DESIGN This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver not compatible with vertical hanging bikes bike racks that require the bikes to be hung mounted vertically. FULLY TESTED Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling. RUST, CHIP, UV-RESISTANT This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays. EASY TO INSTALL This hitch offers a custom, factory fit on select model years of the Toyota Tacoma.

DEPENDABLE STRENGTH This RV trailer hitch is rated for 5,000 lbs. GTW, 500 lbs. TW, 6,000 lbs. WD and 600 lbs. WDTW limited to lowest-rated towing component. VERSATILE DESIGN This RV hitch equips your camper with a standard 2-inch receiver not compatible with vertical hanging bikes bike racks that require the bikes to be hung mounted vertically. EASY TO INSTALL Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 51 inches wide. FULLY TESTED Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing. RUST, CHIP, UV-RESISTANT This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.

Hardware instructions included. Limited Lifetime Warranty to original purchaser. Mounts directly to vehicle frame. Never exceed vehicle weight rating. Made in the USA.

VERSATILE COMPATIBILITY- FITS 99 TOWING NEEDS, FITS 2 RECEIVER ONLY - This Koerdo Adjustable trailer hitch with 2.0 inch receiver effortlessly fits a wide arrange of connectors including heavy Trucks, RVS, Farm Trailers, Cargo Trailer, Live stock trailer, Campers and even off-road vehicles like ATVS and Motorcycles. So whether you are towing a small utility trailer or a heavy duty camper, this hitch will never let you down.. ADJUSTABLE DUAL BALLS, 6 DROPRISE - The 2hitch ball is with towing capacity of15000lbs and the 2-516 hitch ball is with 20000lbs towing capacity which allows for 6drop down depth and 6rise height so the hitch can be easily switched to different trailers without having to worry about it not sitting level.. SUPER SOLID, NICE WEIGHT, PULLS GREAT - Unlike standard ball hitches, this one is made from solid bar stock, NOT HOLLOW TUBING. Constructed from high quality iron alloy and finished with a corrosion-resist and black power coat and zinc plating and Flawless welds, it can withstand the toughest towing conditions. Rain, Water, Dust and sand are no match for this hitch. The solid and reliable solder joints, along with the 8mm thick steel shank, provide the confidence needed for heavy duty towing.- A Trailer that may outlive your truck.. NO PLAY, NO SWAY, 3 Upgraded NO-RATTLE Measures? 3 silencer pads and8 O rings to reduce the sound between shank and the receiver Rubber washers in between the shank and the receiver removable parts of the balls. All these help cut down any of the noise the trailer may have. Enjoy your quiet lovely journey. FLEXIBLE ADJUSTABILITY --The 6 adjustable ball mount is a standout feature of this hitch. Its ability to drop or rise in 1 increments provides the perfect fit for trailers of different heights. No more hassle of swapping hitches for different vehicles or trailers. you can easily adjust the height to achieve a level towing setup, ensuring a smooth and stable ride every time..

Replaces the head for the CURT adjustable tri-ball mount 45799 and mounts on the CURT adjustable tri-ball tube mount 45802 not included. Features three welded trailer balls on a solid shank. 1-78 ball rated for 6,000 lbs. GTW 600 lbs. TW, 2 ball rated for 7,500 lbs. GTW 750 lbs. TW and 2-516 ball rated for 10,000 lbs. GTW 1,000 lbs. TW limited to lowest-rated towing component. Shank protected by a durable powder coat finish, and trailer balls feature a polished chrome-plated finish. Requires tube mount 45802 and pins clips for attachment not included.

Replacement channel for CURT 45902 or 45908. Fits trailer hitches with a 2-12 x 2-12 receiver tube opening. Adjustable channel mount allows for precise trailer leveling. Two hitch pin holes provide shank lengths of 11 or 12. Protected by a highly durable carbide powder coat finish.

Replaces the pins for any CURT adjustable channel mount. Adjustable channel mount allows for precise trailer leveling. Protected by a zinc finish. Limited lifetime warranty one-year finish, one-year parts. Includes mounting pins and clips only.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 34 diameter holes are spaced 1-14 from center to center.

VERSATILE TOWING - This ball and pintle hitch combination equips your pickup truck for heavy-duty towing jobs. The 2-516-inch diameter ball can be coupled to a 2-516-inch trailer coupler or a lunette ring with a 2-12-inch to 3-inch inside diameter. CONVENIENT FIT - For maximum convenience and an easy installation whenever needed, this pintle hitch features a 2-12-inch x 2-12-inch shank to fit virtually any industry-standard 2-12-inch hitch receiver. DEPENDABLE STRENGTH - This ball and pintle hook combo is rated for a pintle capacity of 20,000 lbs., a ball capacity of 20,000 lbs. and a tongue weight capacity of 4,000 lbs. The body is constructed from solid forged steel. SECURE CONNECTION - To ensure a reliable connection to your trailer, this pintle hitch comes with a spring-loaded arm. The arm locks down onto the hitch ball and can be secured with the included safety pin. WEATHER-RESISTANT - This ball and pintle hook hitch is shielded in a highly durable powder coat finish for long-lasting resistance to rust, chipping and UV damage, in spite of rain, snow, mud and other outdoor elements.

HEAVY-DUTY TOWING. This adjustable coupler channel helps provide a heavy-duty towing connection between your truck and trailer. It securely bolts onto your trailer and is commonly used for construction, agriculture and military applications. ADJUSTABLE INSTALL. For a flexible installation, this lunette ring or coupler mount has multiple holes for easy vertical adjustment of the coupling point. The 11-34-inch channel allows for 5 distinct height adjustment positions. VERSATILE FIT. This coupler channel features an inside width of 3 inches and 2-inch on-center bolt pattern to accept a CURT channel-style lunette ring or coupler bolt kit 48620 sold separately. TOUGH BUILD. This lunette ring coupler channel mount is constructed from solid, one-piece, formed steel for superior strength. WELD-ON OPTION. This coupler channel comes with a raw steel finish to be easily welded into place and painted with the finish of your choice. It also features holes in the back for a bolt-on option hardware not included.

Rated to 7,500 lbs. gross trailer weight and 750 lbs. tongue weight. Fits trailer hitches with a 2 x 2 receiver tube opening. Factory-torqued CURT trailer ball accepts a 2 coupler. 6 drop for precise trailer leveling, particularly with larger trucks. Hollow shank weighs less and can be used with an anti-rattle kit.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 34 diameter holes are spaced 1-14 from center to center. Fits 2-12 x 2-12 hitch receiver tube opening with 58 hitch pin hole.

Versatile UsageOur standard 2.52.5 receiver can perfectly fit any connector of trailer, rear bumper, agricultural machines and dual receiver extender with the same size, Aluminum shank can be adjusted according to your needs. It is ideal for towing and hauling boats, trailers, trucks, campers, livestock trailers, recreational vehicle trailers and more. UPGRADED DURABILITY The Adjustable Trailer Hitch has been meticulously crafted by skilled artisans with decades of experience. It features a hand-sanded polished finish and a silver powder coat that provides excellent protection against rust, corrosion, scratches, and other forms of wear and tear. These design elements ensure that the hitch is highly durable and has an extended service life. POWERFUL TOWING CAPACITYThis tow hitch has a 2 inch ball with a towing capacity of 8,000 lbs and a 2-516 inch ball with an industry-leading capacity of 18,500 lbs. It also offers an 6 inch drop down depth and 6 inch rise height for easy adjustment makes it really fast to change ball mount height to match the hole until it reaches the optimal level of the trailer combination to your towing needs. MORE SECUREOur adjustable trailer hitch really is a complete all-in-one system that features a dual-balls design with an integrated ball head that eliminates the need for separate ball mounts. Greatly improves its towing capacity, it also equipped with two anti-theft pin locks and six keys for safety sake You no longer have to worry about losing your keys and not being able to use them. PEAK PERFORMANCEThe Adjustable Hitch is constructed from aircraft-grade aluminum-magnesium alloy and chrome-plated steel tow balls. It is both smooth and firm, with exceptional resistance to corrosion, rain, snow, and other harsh weather conditions. The matte aluminum frame is also resistant to rust, cracking, and flaking. Rest assured the product is manufactured with the finest materials and durable structures.

UNIVERSAL TOWING. Provides either 6 drop or 5-14 rise capacity. SMOOTH TOWING. Built-in anti-rattle feature stops unwanted noise and vibrations. HIGH CAPACITY. 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-516-inch ball is rated for 14,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch trailer hitch receiver. WEATHER-RESISTANT. To protect it against the elements, this adjustable ball mount is finished with a durable black powder coat, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

Mounts to a trunnion bar WD hitch head to help level the trailer and tow vehicle. Fits CURT trunnion bar weight distribution hitches 17333 and 17422. Pre-assembled with spring bar chain for ready attachment. Multiple chain links allow for flexible adjustment of tension. Constructed from forged steel for optimum strength.

Replaces shank for adjustable ball mount 45799 or 45049. Rated for up to 10,000 lbs. GTW limited to lowest-rated towing component. Mounts on trailer hitches with a 2 x 2 receiver tube opening. Shank can be flipped for a drop or rise of 5-34, allowing for precise trailer leveling. Protected by a durable powder coat finish.

Superior Towing Stability Ride comfortably with the Camco ReCurve R3 weight distribution hitch. It features 1,200lb max tongue weight rating, 2-516-inch ball with a 15,000lb max rating. Enjoy effortless towing for RVs, boats, trailers up to 12,000 lbs. Premium Anti-Sway Hitch Customize your towing experience with this RV trailer hitch. The adjustable hitch will distribute weight evenly, reducing strain and offering a smoother ride compatible with a 2 RV trailer hitch receiver. Adjustable Sway Control This weight distribution hitch utilizes brake pad material for superior sway management, providing increased control that easily adjusts to suit your needs. Turn trailer sway control onoff with a simple one-bolt mechanism. Quiet Smooth Operation Achieve a seamless towing experience with the ReCurve R3 adjustable hitch. This weight distribution hitch minimizes noise and wear for a tranquil travel experience where your hitch and trailer move as one. Robust Durable Construction Crafted with premium materials and expert workmanship, this RV Hitch Stabilizer is the perfect addition for your RV towing needs. Trust Camco RV products and RV supplies for all your trips.

Fits trailer hitches with a 2 x 2 receiver tube opening. Features two hitch pin holes for 7-12 or 10-12 length. Equipped with a 1 hole to accept a trailer ball shank. 34 rise or 2 drop for precise trailer leveling. Hollow shank weighs less and can be used with an anti-rattle kit.

HIGH STRENGTH Adjustable trailer hitch ball mount is rated for 7500 lbs gross trailer weight this hitch adapter is constructed from quality steel to offer dependable strength. ADJUSTABLE HITCH The 9-12 drop 8-14 rise drop hitch offer flexible adjustment. The pins hold hitch balls in place and allow for a quick change-out system. VERSATILE USAGE ANTI-THEFT FEATURES Our adjustable trailer hitch ball mount can perfectly fit any connector of trailer, rear bumper, agricultural machines and dual receiver extender with the same size, aluminum shank can be adjusted according to your needs.Each hitch ball mount includes a combination of a set of lock and two keys. CORROSION-RESISTANT With high-quality construction and a black powder-coated finish, the hitch extender is durable and resistant to rust, corrosion, and UV damage, providing long-lasting protection for your vehicle against scuffs, scratches, and even dents. ATTENTIVE AFTER-SALES SERVICE Our attentive after-sales service ensures that any installation or product issues are promptly addressed. INSTALLATION TIP Tighten the nut under the trailer ball with a tool. Make sure the open screw above it is level when fully tightened.Always check that all parts are secure before towing to ensure safe driving.

EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer CURT channels 48610 and 48650 recommended, sold separately. SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing. PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-inch diameter trailer ball. HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 7,000 lbs. gross trailer weight and 1,050 lbs. tongue weight. CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.

Replacement for CURT adjustable channel mount 45900 or 45907 anti-rattle not included. Fits trailer hitches with a 2 x 2 receiver tube opening. Rated for 14,000 lbs. GTW and 1,400 lbs. TW limited by lowest-rated towing component. Adjustable channel mount allows for precise trailer leveling, and two hitch pin holes provide shank lengths of 11 or 12. Protected by a highly durable carbide powder coat finish.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The shank can be flipped to provide up to a 7-12-inch drop or 6-14-inch rise. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. It is rated for a capacity of 5,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. TOW BALL READY. This adjustable drop hitch comes ready to accept a trailer hitch ball for dependable towing. The ball hole is able to mount a trailer ball with a 1-inch diameter shank for powerful towing. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable black powder coat finish.

Solid, forged construction. 2 Drop, 1 Rise, 8-12 Length, 1-14 Ball Hole. 17,000 GTW 2550 TW. For trailer hitches with a 2 x 2 receiver tube opening. Durable carbide powder coat finish.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The shank can be flipped to provide up to 5-34-inch drop or rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 1-78-inch ball is rated for a capacity of 6,000 lbs., the 2-inch ball for 7,500 lbs. and the 2-516-inch ball for 10,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable black powder coat finish, and the three hitch balls are protected with a corrosion-resistant chrome plating.

Wide range of use compatible with standard 2-inch receivers and 2-inch hitch balls, offering extensive applicability. Heavy-Duty Beast Built tough with high-strength steel and a durable powder coat finish, TYT trailer hitch can handle up to a whopping 7500 pounds of trailer weight. Perfect for your camper, boat, or utility trailer adventures. Easy-Peasy Installation No sweat setup Just slide the 2 x 2 shank into your hitch's receiver, glide the platform into the adjustable channel, and voila You're ready to roll in no time. Smooth Sailing Experience the joy of seamless towing with anti-rattle screws that keep vibrations and annoying noises at bay, enjoy a quiet and steady ride, mile after mile. Caring Service Were here for you Have any issues Just reach out to us, and well take care of it. Installation Notice For safe use, make sure the ball is securely tightened before towing, and check all connections to ensure they are firmly in place..

No More Hitch Sizing Stress Orion Motor Tech's trailer hitch ball mount comes with a standard 2 in. receiver, 2 in. ball, 9-12 in. drop, and 8-14 in. rise for secure towing. Tow everything from fishing boats to RVs, campers, and utility trailers. Take on Any Haul This Class III towing hitch is rated for 8,000 lb. GTW and SAE J684 tested for safety. Tow your fully loaded F-150 across the country or haul your next big adventures with total confidence and zero sway. Top-Tier Trailer Security Each locking pin is upgraded to a high-level anti-theft lock, ready to use with one key, offering solid protection for your trailer, keeping your load secure, and giving you confidence in safe towing every time. Built to Resist the Elements The powder-coated hitch arm and zinc-plated 40Cr steel ball stand up to rain, snow, and salt. Whether you've been towing in snowy winter conditions or near the coast, a quick rinse restores its fresh, like-new shine. Skip the Tools Our pre-assembled ball hitch eliminates the need for any tools. Simply slide it into the receiver and secure it in seconds, getting you on the road faster than buckling your seatbelt.

Fits trailer hitches with a 2 x 2 receiver tube opening. Mounts any CURT adjustable pintle hook or ball pintle combination. Face plate holes spaced apart 1-34 high x 3-516 wide. Six-position height adjustment allows for precise trailer leveling. Shank constructed from solid steel for optimum strength.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable pintle hitch. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable pintle hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from steel, this adjustable hitch pintle mount is ready to work. The 2-516-inch ball is rated for a capacity of 13,000 lbs. The pintle hook design can also couple to lunette rings 2-12 or 3-inch inside diameter. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable pintle hitch is shielded in a durable carbide black powder coat finish, and the hitch ball is protected with a corrosion-resistant zinc plating.

All-in-One Tri-Ball Convenience Three ball sizes 1-78, 2, 2-516 let you tow multiple trailers without swapping mounts perfect for mixed fleets and seasonal towing.. Engineered Strength Ratings Rated 10,000 lbs GTW and 1,000 lbs Tongue Weight designed to meet everyday towing demands while maintaining safety margins.. Height Adjustability 5 risedrop adjustment for level towing and safer handling quick to reposition for different vehicletrailer height combinations.. Secure Hookup Theft Protection Includes heavy-duty hitch pin lock and tri-pins to keep your ball mount secured to the receiver and deter theft.. Durable Construction Easy Fit CNC-machinedwelded steel construction with a corrosion-resistant finish for long life fits standard 2 receiver and installs in minutes with basic tools..

Versatile Towing CapacityIncludes 1-78 6,000 lbs, 2 7,500 lbs, and 2-516 10,000 lbs chrome trailer balls, allowing quick switching between different trailer types without additional tools.. Adjustable hitch The adjustable design provides a precise 4-12 rise and drop, ensuring level and safe towing for trucks, SUVs, and trailers with varying height requirements.. Heavy-Duty Tow Hook D-RingEquipped with a heavy-duty tow hook and a swivel D-ring shackle for recovery, pulling, and off-road use, offering greater versatility beyond standard towing.. Double Security Lock SystemComes with two 58 galvanized trailer locks with keys and a 4 silver pin, ensuring secure ball adjustment and hitch attachment. Lock caps protect against moisture, dust, and rust for all-weather performance.. Durable Build Quick InstallationConstructed with premium steel and a corrosion-resistant coating for long service life. Fits standard 2 receivers and installs quickly for everyday towing needs..

DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 7,500 pounds gross trailer weight and 750 pounds tongue weight limited to lowest-rated towing component. VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 4-inch drop and 2-inch rise to promote level towing. READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank trailer ball sold separately. CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats. EASY TO INSTALL. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank in place with a hitch pin sold separately.

EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer CURT channels 48610 and 48650 recommended, sold separately. PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-516-inch diameter trailer ball. EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball. HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 15,000 lbs. gross trailer weight and 2,250 lbs. tongue weight. CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.

DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 5,000 pounds gross trailer weight and 500 pounds tongue weight in the drop position rise position 3,500 lbs. GTW, 350 lbs. TW. VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 8-inch drop and 6-inch rise to promote level towing. READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank trailer ball sold separately. CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats. EASY TO INSTALL. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank in place with a hitch pin sold separately.

HIGHLY ADJUSTABLE. This high-strength pintle hitch mount provides maximum vertical adjustment to ensure level towing. It offers 6 height adjustment positions with a 12-12-inch plate height for use in drop position only. VERSATILE. This adjustable pintle mount is compatible with multiple accessories to accommodate different types of towing. The face plate holes are spaced apart 1-34 inches high by 3-516 inches wide. STANDARD FIT. For maximum convenience and an easy installation whenever needed, this pintle hitch mounting plate features a 2-12-inch x 2-12-inch shank to fit virtually any industry-standard 2-12-inch hitch receiver. SOLID STRENGTH. For dependable towing on the job, this pintle mount is rated for 20,000 lbs. gross trailer weight. The shank and mounting plate are constructed from solid steel with a high-strength design. WEATHER-RESISTANT. This pintle hitch mounting plate is finished to long outlast the outdoor elements, featuring a durable carbide black powder coat finish. This protects the steel against rain, snow, mud, road salt and other corrosive threats.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-34-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. It is rated for a capacity of 6,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-516-inch ball for 20,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-12-inch x 2-12-inch trailer hitch receiver. It's perfect for heavy-duty class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

AMERICAN OWNED, FAMILY OPERATED - Join the Rhino Family Support a USA based FatherSon Business. REAL LIFETIME REPLACEMENT PROGRAM - At Rhino USA, we stand behind our products. If you have any questions or comments, feel free to reach out to one of our friendly and knowledgable customer support representatives and we will get you taken care of. INDUSTRY LEADING STRENGTH - 2-Inch Hitch Ball GTW Towing Capacity of 8,000lbs Reversible 2-516 Ball with a 12,500lb GTW Towing Capacity for Hauling Heavy Trucks, RV, Trailer, Camper More. DESIGNED FOR 2 RECIEVERS - This Drop Hitch Is Specifically Designed For Use With Class 3 and 4 Trailer Hitch Recievers Commonly Found on 12 Ton Trucks and SUV's. This Hitch is Compatible with Dodge Ram 1500, Jeep Wrangler Cherokee, Chervrolet Silverado GMC Sierra 1500, Ford F-150 Ranger, Toyota 4 Runner Tundra Tacoma, Nissan Titan More. IDEAL FOR VEHICLES WITH LEVELING KITS STOCK RIDE HEIGHT This Hitch Provides 6 of Drop, Which Will Allow Users to Level Tow Trailers With Recievers 18 - 20 From The Ground.

TOUGH BUILD. Constructed from high-strength steel, this multi-use adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 8,000 pounds, and the 2-516-inch ball for 10,000 pounds. ONLY 15 POUNDS. Though it offers an exceptional weight rating of 10,000 pounds maximum, this adjustable multi-ball hitch only weighs 15 pounds. This makes it easy to handle and carry. HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 3-34-inch drop or 3-12-inch rise. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most pickup trucks and class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this compact adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

ADJUSTABLE HEIGHT DUAL BALL VERSATILITY The Tow Stow adjustable ball mount lets you pull your boat to the lake, mower to the shop, or tractor to the job site using the same hitch. Simply pull the two stainless steel adjustment pins to raise or lower the hitch for proper, level towing, then rotate the ball assembly to switch between 2 inch and 2-516 inch ball sizes to match different trailer couplers.. STOWABLE DESIGN FOR EVERYDAY DRIVING When towing is complete, the Tow Stow rotates under the vehicle and stores neatly out of the way. This stowable design helps prevent painful shin impacts and avoids contact with low garage doors, keeping the hitch accessible but safely tucked away until its needed again without removing it from the receiver.. SECURE ANTI-THEFT CONSTRUCTION Designed with built-in security, the Tow Stows adjustable arm cannot be removed once the hitch is locked into most 2 inch receivers. By rotating the hitch under the vehicle and reinserting the pins, the ball mount stays securely in place, helping deter theft while keeping the hitch ready for your next tow.. RUGGED AMERICAN-MADE STEEL BUILD Constructed from high-strength American-made steel, this adjustable ball mount is engineered for demanding use. A corrosion-resistant two-layer finish, including an e-coat base and ironclad black powder coat, protects against rust, chips, and wear, making it suitable for hauling equipment during the week and launching the boat on weekends.. MADE IN USA WITH LIFETIME WARRANTY Manufactured and assembled in Humboldt, Kansas, the Tow Stow reflects BWs commitment to quality craftsmanship and Midwest values. Backed by BWs Limited Lifetime Warranty, this hitch is built to deliver long-term confidence, with support available if damage occurs due to accidents or misuse..

Rated to 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Fits trailer hitches with a 2 x 2 receiver tube opening. Factory-torqued CURT trailer ball accepts a 2-516 coupler. Constructed from solid, forged steel for superior strength. 2 drop for precise trailer leveling.

EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer CURT channels 48610 and 48650 recommended, sold separately. SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing. PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-516-inch diameter trailer ball. HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 12,500 lbs. gross trailer weight and 1,875 lbs. tongue weight. CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.

DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 10,000 pounds gross trailer weight and 1,000 pounds tongue weight limited to lowest-rated towing component. VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 8-inch drop and 6-34-inch rise to promote level towing. READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-14-inch hole to accept a trailer hitch ball with a 1-14-inch diameter shank trailer ball sold separately. CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats. EASY TO INSTALL. To install this class 4 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin sold separately.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 34 diameter holes are spaced 1-14 from center to center.

Fits trailer hitches with a 2-12 x 2-12 receiver tube opening. Mounts any CURT adjustable pintle hook or ball pintle combination. Face plate holes spaced apart 1-34 high x 3-516 wide. Three-position height adjustment allows for precise trailer leveling. Shank constructed from solid steel for optimum strength.

Levels tow vehicle and trailer by redistributing a portion of the tongue weight. Includes sway control kit 17200 to help reduce trailer sway. Grease zerk fitting provides easy, continuous lubrication. Grease must be applied to the zerk in order to lubricate. Equipped with round, forged steel spring bars for reliable strength.

Integrated sway control reduces sway and levels the vehicle and trailer. Two points of sway control use friction to keep trailer aligned. Brackets use friction to resist lateral movement. Adjustable brackets provide fixed support unlike spring bar chain models. Head tilt adjustment feature simplifies setup and eliminates the need for washers.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-516-inch ball for 14,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable pintle hitch. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable pintle hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from steel, this adjustable hitch pintle mount is ready to work. The 2-516-inch ball is rated for a capacity of 20,000 lbs. The pintle hook design can also couple to lunette rings 2-12 or 3-inch inside diameter. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-12-inch x 2-12-inch trailer hitch receiver. It's perfect for heavy-duty class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable pintle hitch is shielded in a durable carbide black powder coat finish, and the hitch ball is protected with a corrosion-resistant zinc plating.

Unusual Design-RED CRYSTALThe red crystal glass accents not only give the adjustable hitch an extraordinary appearance but also provide a certain level of safety assistance. We strive for the adjustable trailer hitch in product quality and appearance. STRONG TOWING CAPACITYCAMPX tow hitch can meet almost all your towing needs, Including Class , Class and Class towing system. 2 hitch ball has towing capacity of 14500lbs, while 2-516 hitch ball offers an industry-leading towing capacity of 18,500lbs, Allows. Adjustable 6 drop hitch 2 inch receiverThe tow ball hitch fit standard 2x2 receiver only, while 6 droprise hitches offer flexible adjustment, adjusts in 1 increments so you get the perfect fit for any trailer heightWith no need to ever change hitches for different vehicles. Safer AccessoriesTwo-leg Locking Pins 3 Silicone Cushion Washers 1 Metal Cushion Washer. Special structures and accessories ensure the stability of the trailer during operation and reduce noise.Our Adjustable Trailer Hitch has applied for a patent for its anti-noise function, patent number US 11446973 B1. Service CommitmentThis drop hitch comes with a 12 months factory warranty. If you have any questions concerning its usage, please contact us and we will respond within 12 hours.

ADJUSTABLE VERSATILE Onsski's trailer hitch fits 2-inch receiver, offering versatile installation options. Easily adjust to varying heights, with a generous 6-inch droprise capacity. Dual balls, measuring 2-516 and 2, ensure strong towing capabilities up to 12,500 lbs GTW and 8,000 lbs, respectively.. SECURE DURABLE Safety is always our first priority, this hitch is built from upgraded high-strength aluminum. it's built to withstand harsh conditions, ensuring long-lasting reliability.. ANTI-THEFT PROTECTION Includes 2 stainless steel hitch pin locks with 3 unique keys, safeguarding your hitch and trailer from theft. Each lock cylinder is unique, providing added security and peace of mind.. NOISE REDUCTION DESIGN Equipped with 4 hitch silencers, this towing hitch reduces road rattle and noise, enhancing your towing experience. Fits snugly on most 2-inch tow mounts, extending the lifespan of your equipment.. WARRANTY SUPPORT Count on Onsski's professional service team for expert advice and support. With a commitment to customer satisfaction, we offer a range of RV trailer accessories and stand behind our products..

Heavy Duty Towing Lightweighted and highly durable 6061-T6 Aircraft Aluminum provides high towing capacity comparable with carbon steel by with 13 12 weight of carbon steel. Ideal for SUVs and light trucks. Dual Ball Capacity Spec 2 Ball - 8,000 lbs GTW 800 lbs TW 2-516 Ball - 12,500 lbs GTW 1,250 lbs TW. Superior Anti Corrosion Multi-layers anodizing process ensures our trailer hitch having outstanding anti-coroision performance. Salt-spray resistant test 500 hours ASTM B117 guarrantees a lifetime of over 10 years before getting corupted. Far superior to carbon steel product and especially suitable foruse at seaboard.. Easy InstallationWide Compability slide-to-fit design ensures 30-second fast installation with anti-theft heavy duty locking hitch pin. Our product provides a 6 droprise adjustable length, making it widely compatible with various trailer with standard 2 Class IIIIV receivers.. Anti Rattle System Eight vibration Dampers of silicone rings cut 99 rattle at 60mph arising from the locking hitch pin Lab-tested with ASTM E1050. Zero Risk Promise Non-stop protection against structural defects no mileage limits, no hidden fees.

ADJUSTABLE The Tow Stow Adjustable Ball Mount Trailer Hitch is adjustable in height for level towing. Simply pull the two stainless steel adjustment pins to raise or lower the hitch to the ideal position for your vehicle and trailer combination. Easily rotate the ball assembly to swap between ball sizes. And, when youre done towing, stow the hitch under your vehicle to avoid striking your shin or the garage door. This feature is preserved exactly as described in the original product information and expanded only to clarify compatibility, installation intent, and real-world performance without altering any specifications or claims provided by BW.. STOWABLE SECURE Keep your hitch handy but out of the way. When you're not towing, stow the Tow Stow Adjustable Ball Mount right where you'll need it next. Just rotate the hitch under the vehicle, replace the pins, and your Tow Stow is tucked safely away from your shins and garage door. And, with the Tow Stow's anti-theft design, once you lock the hitch in most receivers, the adjustable arm of the hitch cannot be removed. This feature is preserved exactly as described in the original product information and expanded only to clarify compatibility, installation intent, and real-world performance without altering any specifications or claims provided by BW.. RUGGED RESILIENT - The Tow Stow Adjustable Ball Mount Trailer Hitch is built to last thanks to its high-strength American-made steel construction and corrosion-resistant finish. Two layers of protectionan e-coat and ironclad black powder coatcreate a durable, long-lasting coating that can withstand the toughest conditions. Manufactured to haul equipment to the jobsite all week and launch the boat each weekend, the Tow Stow was made to be as hardworking and versatile as you are.. LIFETIME WARRANTY The Tow Stow Adjustable Ball Mount Trailer Hitch is backed by BWs Limited Lifetime Warranty. We are confident that our products are made without design or quality defects. However, if you believe that one of our products doesnt live up to our standards, we would make it right with you, our customer.. AMERICAN MADEThe Tow Stow Adjustable Ball Mount Trailer Hitch is manufactured and assembled completely in Humboldt, Kansas, where we can oversee every detail. BW's employee-owners stand behind each product we build and are proud of the Midwest values that have shaped our company into what it is today. We make only the best hitches and towing accessories so that you can focus on the road ahead and never worry about what's behind. This feature is preserved exactly as described in the original product information and expanded only to clarify compatibility, installation intent, and real-world performance without altering any specifications or claims provided by BW..

?MUST CHECK Before Buying WRONG SIZE WON'T FIT1 Measure your receiver's inner size. This link is ONLY for 2 x 2 receivers. If yours is 2.5 x 2.5, please search for our 2.5-inch model. 2 Measure your receiver's outer width. It MUST NOT exceed 3.5 usable length of lock pin. 3Check your trailer coupler size. This hitch features a dual ball that fits both 2 and 2-516 couplers.. Your Universal Tow Link Ready for Your 2 ReceiverDesigned for the universal 2-inch receiver, this tailer hitch is your reliable connection to a vast range of towing tasks. It works effortlessly with heavy trucks, RVs, diverse utility trailers, campers, and off-road vehicles like ATVs. No matter your loadfrom a small utility trailer to a substantial camperthis hitch provides dependable performance, trip after trip.. Master Any Height Match 6 Drop or RiseThis tow hitch is a universal solution for vehicle-to-trailer height discrepancies. Simply install it facing up for a higher trailer or down for a higher vehicle, then fine-tune the level with 1-inch increments. Our step-by-step guides and videos make setup quick and easy.. Cover Classes III-V Maximum 20,000 LBS GTWEliminate the need for multiple hitches. This dual-ball system is designed to handle a wide range of towing needs with reliable strength. The interchangeable 2-inch ball supports up to 15,000 lbs, while the 2-516-inch ball is rated for serious capacities up to 20,000 lbs, making it ideal for heavy trailers and RVs. The ball hitch is the strong, smart foundation for Class III to V towing.. Forged from Alloy Steel The U-Shaped Anti-Theft LockThe instant one-press locking adds unmatched convenience to your routine, while the high-strength, U-shaped alloy construction prevents theft and eliminates worries about it shaking loose on rough roads. The precision-engineered lock cylinder works smoothly, season after season, for dependable security that doesn't complicate your day.. Built for the Long Haul, Engineered to OutlastThe drop hitch use SOLID SHANK instead of hollow tube to eliminate twisting under load. This foundational strength is complemented by a reinforced 9.5mm thick U-channel, dual reinforcement beams, and an alloy steel locking pin designed to handle significant force. The result is unwavering stability and the rock-solid confidence you need for every tow.. LESS NOISE, LESS SWAY, 3 UPGRADED MEASURESOur truck hitch use a combination of ? 8 O-rings, 3 square silencer pads, and 2 hitch ball side pads to eliminate movement and noise where it happensat the lock, between the receiver and shank, and between the U-channel and the hitch ballfor a perfectly quiet tow..

? MUST CHECK Before Buying WRONG SIZE WON'T FIT1 Measure your receiver's inner size. This link is ONLY for 2.5 x 2.5 receivers. If yours is 2 x 2, please search for our 2-inch model. 2 Measure your receiver's outer width. It MUST NOT exceed 3.5 usable length of lock pin. 3 Check your trailer coupler size. This hitch features a dual ball that fits both 2 and 2-516 couplers.. Your Universal Tow Link Ready for Your 2.5 ReceiverDesigned for the universal 2.5-inch receiver, this tailer hitch is your reliable connection to a vast range of towing tasks. It works effortlessly with heavy trucks, RVs, diverse utility trailers, campers, and off-road vehicles like ATVs. No matter your loadfrom a small utility trailer to a substantial camperthis hitch provides dependable performance, trip after trip.. Master Any Height Match 6 Drop or RiseThis tow hitch is a universal solution for vehicle-to-trailer height discrepancies. Simply install it facing up for a higher trailer or down for a higher vehicle, then fine-tune the level with 1-inch increments. Our step-by-step guides and videos make setup quick and easy.. Cover Classes III-V Maximum 22,000 LBS GTWEliminate the need for multiple hitches. This dual-ball system is designed to handle a wide range of towing needs with reliable strength. The interchangeable 2-inch ball supports up to 15,000 lbs, while the 2-516-inch ball is rated for serious capacities up to 22,000 lbs, making it ideal for heavy trailers and RVs. The ball hitch is the strong, smart foundation for Class III to V towing.. Forged from Alloy Steel The U-Shaped Anti-Theft LockThe instant one-press locking adds unmatched convenience to your routine, while the high-strength, U-shaped alloy construction prevents theft and eliminates worries about it shaking loose on rough roads. The precision-engineered lock cylinder works smoothly, season after season, for dependable security that doesn't complicate your day.. Built for the Long Haul, Engineered to OutlastThe drop hitch use SOLID SHANK instead of hollow tube to eliminate twisting under load. This foundational strength is complemented by a reinforced 9.5mm thick U-channel, dual reinforcement beams, and an alloy steel locking pin designed to handle significant force. The result is unwavering stability and the rock-solid confidence you need for every tow.. LESS NOISE, LESS SWAY, 3 UPGRADED MEASURESOur truck hitch use a combination of ? 8 O-rings, 3 square silencer pads, and 2 hitch ball side pads to eliminate movement and noise where it happensat the lock, between the receiver and shank, and between the U-channel and the hitch ballfor a perfectly quiet tow..

Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight. Compatible with weight distribution hitch 5,500 lbs. WD 550 lbs. WDTW. Engineered with a vehicle-specific design for a custom fit. Concealed main body for OE look and seamless integration with the vehicle. Tested for safety in accordance with SAE J684.

DEPENDABLE STRENGTH This trailer hitch is rated for 4,500 lbs. gross trailer weight, 675 lbs. tongue weight, 4,500 lbs. weight distribution capacity and 675 lbs. weight distribution tongue weight limited to lowest-rated towing component. VERSATILE DESIGN This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. FULLY TESTED Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling. RUST, CHIP, UV-RESISTANT This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays. EASY TO INSTALL This hitch offers a custom, factory fit on select model years of the RAV4, NX250, NX350, NX350h, and NX450h.

Levels tow vehicle and trailer by redistributing a portion of the tongue weight. Includes sway control kit 17200 to help reduce trailer sway. Grease zerk fitting provides easy, continuous lubrication. Grease must be applied to the zerk in order to lubricate. Equipped with round, forged steel spring bars for reliable strength.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 34 diameter holes are spaced 1-14 from center to center. Fits 2 x 2 hitch receiver tube opening with 58 hitch pin hole.

Integrated sway control actively resists sway and levels the vehicle and trailer. Four points of sway control work together to keep trailer aligned. Welded head with cast pieces and trunnion-style forged steel spring bars. Uses spring cam system with hardened components, instead of friction alone. Adjustable brackets provide fixed support unlike spring bar chain models.

Replaces coupler latch in CURT posi-lock couplers for 2-inch trailer balls coupler sold separately. Fits couplers with 2-inch, 2-12-inch or 3-inch channel widths trailer tongue width. Spring and nut posi-lock mechanism allows for easy adjustment. Features holes to accept a safety pin or coupler lock. Constructed from high-strength steel and protected by a durable zinc-plated finish.

EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer CURT channels 48610 and 48650 recommended, sold separately. PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-516-inch diameter trailer ball. EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball. HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 14,000 lbs. gross trailer weight and 2,100 lbs. tongue weight. CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.

For use with Curt 45902. Adjustable channel mount allows for precise trailer leveling. Spring-loaded locking arm for secure coupling. Built-in anti-rattle helps promote quiet towing. Protected by a durable powder coat finish.

EASY TO ADJUST. This high-strength pintle hitch mount provides easy vertical adjustment to ensure level towing. It offers 3 height adjustment positions with a maximum drop of 6-12 inches for use in drop position only. VERSATILE. This adjustable pintle mount is compatible with multiple accessories to accommodate different types of towing. The face plate holes are spaced apart 1-34 inches high by 3-516 inches wide. STANDARD FIT. For maximum convenience and an easy installation whenever needed, this pintle hitch mounting plate features a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch hitch receiver. SOLID STRENGTH. For dependable towing on the job, this pintle mount is rated for 15,000 lbs. gross trailer weight. The shank and mounting plate are constructed from solid steel with a high-strength design. WEATHER-RESISTANT. This pintle hitch mounting plate is finished to long outlast the outdoor elements, featuring a durable carbide black powder coat finish. This protects the steel against rain, snow, mud, road salt and other corrosive threats.

Fits trailer hitches with a 2-12 x 2-12 receiver tube opening. Mounts any CURT adjustable pintle hook or ball pintle combination. Face plate holes spaced apart 1-34 high x 3-516 wide. Three-position height adjustment allows for precise trailer leveling. Shank constructed from solid steel for optimum strength.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 34 diameter holes are spaced 1-14 from center to center.

Helps limit lateral trailer movement to reduce sway. Fits most weight distribution hitches or a sway tab mount 45820. Included weld-on sway tab allows for use with most ball mounts. Spacer plate ensures proper alignment of trailer ball attachment. Features adjustment bolt to accommodate different load sizes.

DEPENDABLE STRENGTH - Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup weight capacity may change if trailer ball is removed. VERSATILE USE - This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-inch diameter ball, 58-inch pin hole and 7-12-inch overall length. READY TO TOW - Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver. CORROSION-RESISTANT - For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. EASY TO INSTALL - To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.

6 INCH Adjustable Dual Ball Kohree adjustable trailer hitch fits 2 Inch Receiver. The tow mount is offered in two install ways. It is easy to adjust it to different heights and the maximum droprise height is 6 inches. Dual ball diameters are measured 2 516 and 2 with strong towing capacity GTW of up to 12,500lbs and 8,000lbs respectively.. Secure Sturdy The trailer hitch is designed and developed by Kohree team. Safety is our first design concept. Made of upgraded high-strength and heavy-duty aluminum material. The surface of the hitch is plated with a rust-proof layer, which can work for a long time even in a harsh environment.. Reduce Rattle And Hitch Noise The towing hitch with 1 anti-rattle hitch clamp and 4 hitch silencers. The hitch tightener eliminates hitch noise, rattle, and wobble for a quiet, stable ride. The silencer pad provides a cushion between the receiver and hitch to eliminate annoying road rattle. Besides, it extends the use time of your tow equipment. Fits most 2 tow mounts. Anti-Theft Hitch Pin Lock The tow hitch is equipped with 2 hitch pin locks and 4 keys. The locking hitch pin is made of stainless steel material. Each lock cylinder is unique and protects your hitch mount and trailer from stealing.If the length of the hitch pin is too short to use, please remove the rubber ring.. Kohree Service Kohree service team provides professional advice at any time to settle all your doubts about products. We also offer different types of RV trailer accessories products..

Versatile Usage Our standard 22 receiver can perfectly fit any connector of trailer, rear bumper, agricultural machines and dual receiver extender with the same size, Aluminum shank can be adjusted according to your needs. Supreme Durability Meticulously engineered with Aluminum crafted under 450 and 4,410,000lbs of pressure applied, so product can withstand years of use without issue. Reliable Strength 2 hitch ball has towing capacity of 8,000lbs, while 2-516 hitch ball offers an industry-leading towing capacity of 12,500lbs, so you can haul heavier loads such as heavy trucks or RVs with ease. Integrated Structure Integrated hitch balls allow for supreme towing capacity while 6 droprise hitches offer flexible adjustment. The pins hold hitch balls in place and allow for a quick change-out system. Corrosion Resistant Exquisitely crafted from Aluminum alloy and with advanced oxide technology applied on the finish, our LOCAME hitch grants long-lasting defense against rust, wear and corrosion.

Rotating 4-in-1 Ball Mount This patented rotating ball mount combines three trailer ball sizes 1-78, 2, 2-516 rated for 10,000 lbs, 12,500 lbs, and 15,000 lbs GTW, plus one integrated tow hook rated for 10,000 lbs. After setting your desired hitch height, simply pull one pin to rotate between ball sizes or hook without removing the hitch or resetting the droprise.. 5 Drop or Rise Adjustment Offers up to 5 inches of drop or rise to quickly level different trailers for safer and more stable towing. Dual height pins provide stronger load distribution than single-pin designs, delivering consistent stability under towing pressure. Once set, the height remains fixed while you freely rotate between ball sizes without needing to re-adjust.. Solid Alloy Steel Construction Built from alloy steel with a solid rotating ball mount and closed-style shank design for added structural strength. Matte black powder-coated shank resists wear and corrosion, while chrome-plated balls and tow hook reduce abrasion during repeated coupling and towing. The new tow hook design keeps straps securely in place, preventing slippage during use.. Handles Multiple Towing Tasks Designed for travel trailers, boat trailers, utility trailers, campers, and recovery straps with one setup. Provides reliable towing performance across different trailer types within rated capacity, eliminating the need to switch between multiple hitch mounts for different jobs.. Secure Fit for 2 Receivers Includes an anti-theft receiver lock for vehicle connection and three heavy-duty pins for height adjustment and rotation. Compatible with trucks, SUVs, pickups, RVs, ATVs, and UTVs using a standard 2-inch receiver. Note Anti-rattle tightener not included recommended for eliminating receiver play.. WARNING Avoid long-term exposure to outdoor elements to prevent rust. Keep clean and dry for best performance..

Adjustable frame fits a variety of vehicles side plates do not come pre-welded. Fits truck frames up to 44 wide. Rated as a class 5 hitch. Tested for safety in accordance with SAE J684. Great for use with utility boxes.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 10-18-inch drop or 9-18-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-516-inch ball for 14,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

INCREASED COMFORT. This cushion hitch ball mount is engineered with ShockDrop technology, featuring a cushioned isolator that helps deter jerking, jarring, bumps, vibrations, rattling and noise for a more comfortable ride while towing. IMPROVED CONTROL. The dynamic, adaptive isolator of this cushion ball mount helps improve driver control by reducing jerking and jarring and managing sudden braking. It does this without any need for an anti-rattle hitch or anti-rattle shim. VIRTUALLY NO MAINTENANCE. Unlike other torsion hitch and cushion hitch ball mounts, the Rebellion XD does not have an airbag or bearings. This makes the unit very easy to use, lightweight and virtually maintenance-free. HIGH-STRENGTH. For dependable towing strength, the Rebellion XD shock-absorbing hitch is constructed from cast steel and fully tested for 15,000 lbs. gross trailer weight and 1,500 tongue weight limited to lowest-rated towing component. EASILY ADJUSTABLE. This cushion hitch ball mount is equipped with a 2-inch shank and has a 1-14-inch ball hole. The trailer ball platform can be adjusted up or down for level towing 6-inch max drop, no rise.