DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight limited to lowest-rated towing component. VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer. EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 72 inches wide. FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing. RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.

Fits most full-size pickups from Ford, GM and Ram, including the latest models. Tested for safety in accordance with SAE J684. Precisely welded for superior strength and fit. Requires no drilling on most vehicles. Protected by a durable black powder coat finish.

DEPENDABLE STRENGTH This RV trailer hitch is rated for 5,000 lbs. GTW, 500 lbs. TW, 6,000 lbs. WD and 600 lbs. WDTW limited to lowest-rated towing component. VERSATILE DESIGN This RV hitch equips your camper with a standard 2-inch receiver not compatible with vertical hanging bikes bike racks that require the bikes to be hung mounted vertically. EASY TO INSTALL Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 51 inches wide. FULLY TESTED Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing. RUST, CHIP, UV-RESISTANT This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage.

Hardware instructions included. Limited Lifetime Warranty to original purchaser. Mounts directly to vehicle frame. Never exceed vehicle weight rating. Made in the USA.

VERSATILE COMPATIBILITY- FITS 99 TOWING NEEDS, FITS 2 RECEIVER ONLY - This Koerdo Adjustable trailer hitch with 2.0 inch receiver effortlessly fits a wide arrange of connectors including heavy Trucks, RVS, Farm Trailers, Cargo Trailer, Live stock trailer, Campers and even off-road vehicles like ATVS and Motorcycles. So whether you are towing a small utility trailer or a heavy duty camper, this hitch will never let you down.. ADJUSTABLE DUAL BALLS, 6 DROPRISE - The 2hitch ball is with towing capacity of15000lbs and the 2-516 hitch ball is with 20000lbs towing capacity which allows for 6drop down depth and 6rise height so the hitch can be easily switched to different trailers without having to worry about it not sitting level.. SUPER SOLID, NICE WEIGHT, PULLS GREAT - Unlike standard ball hitches, this one is made from solid bar stock, NOT HOLLOW TUBING. Constructed from high quality iron alloy and finished with a corrosion-resist and black power coat and zinc plating and Flawless welds, it can withstand the toughest towing conditions. Rain, Water, Dust and sand are no match for this hitch. The solid and reliable solder joints, along with the 8mm thick steel shank, provide the confidence needed for heavy duty towing.- A Trailer that may outlive your truck.. NO PLAY, NO SWAY, 3 Upgraded NO-RATTLE Measures? 3 silencer pads and8 O rings to reduce the sound between shank and the receiver Rubber washers in between the shank and the receiver removable parts of the balls. All these help cut down any of the noise the trailer may have. Enjoy your quiet lovely journey. FLEXIBLE ADJUSTABILITY --The 6 adjustable ball mount is a standout feature of this hitch. Its ability to drop or rise in 1 increments provides the perfect fit for trailers of different heights. No more hassle of swapping hitches for different vehicles or trailers. you can easily adjust the height to achieve a level towing setup, ensuring a smooth and stable ride every time..

Mounts on trailer hitches with a 3 x 3 receiver tube opening. Adjustable channel mount allows for precise trailer leveling. Shank can be flipped for a max rise of 8-58 and drop of 10-58. 2 ball rated for 10,000 lbs. and 2-516 ball rated for 21,000 lbs.. Two hitch pin holes provide shank lengths of 11 or 12.

Replaces the tube mount for the CURT adjustable tri-ball mount 45799. Accepts the CURT adjustable tri-ball mount head 45800. Protected by a durable powder coat finish. Requires shank 45801, ball head 45800 and pins clips for attachment not included.

Replaces the head for the adjustable tri-ball mount 45799. Features three welded trailer balls on a solid shank. Fits 1-78, 2 or 2-516 couplers. Mounts on the adjustable tri-ball tube mount 45802. Protected by a durable powder coat finish.

Replacement channel for CURT 45902 or 45908. Fits trailer hitches with a 2-12 x 2-12 receiver tube opening. Adjustable channel mount allows for precise trailer leveling. Two hitch pin holes provide shank lengths of 11 or 12. Protected by a highly durable carbide powder coat finish.

Replaces the pins for any CURT adjustable channel mount. Adjustable channel mount allows for precise trailer leveling. Protected by a zinc finish. Limited lifetime warranty one-year finish, one-year parts. Includes mounting pins and clips only.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 34 diameter holes are spaced 1-14 from center to center.

Fits trailer hitches with a 2-12 x 2-12 receiver tube opening. Couples to 2-516 couplers or lunette eyes with a 2-12 or 3 inside diameter. Spring-loaded locking arm for secure coupling. Constructed from solid, forged steel for superior strength. Protected by a durable powder coat finish.

VERSATILE TOWING. This ball and pintle hitch combination equips your pickup truck for heavy-duty towing jobs. The 2-516-inch diameter ball can be coupled to a 2-516-inch trailer coupler or a lunette ring with a 2-12-inch to 3-inch inside diameter. CONVENIENT FIT. For maximum convenience and an easy installation whenever needed, this pintle hitch features a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch hitch receiver. DEPENDABLE STRENGTH. Get more done with the superior towing capacity of this ball and pintle hook combo. It is rated for a pintle capacity of 16,000 lbs. and a ball capacity of 12,000 lbs. The body is constructed from solid forged steel. SECURE CONNECTION. To ensure a reliable connection to your trailer, this pintle hitch comes with a spring-loaded arm. The arm locks down onto the hitch ball and can be secured with the included safety pin. WEATHER-RESISTANT. This ball and pintle hook hitch is shielded in a highly durable powder coat finish for long-lasting resistance to rust, chipping and UV damage, in spite of rain, snow, mud and other outdoor elements.

HEAVY-DUTY TOWING. This adjustable coupler channel helps provide a heavy-duty towing connection between your truck and trailer. It securely bolts onto your trailer and is commonly used for construction, agriculture and military applications. ADJUSTABLE INSTALL. For a flexible installation, this lunette ring or coupler mount has multiple holes for easy vertical adjustment of the coupling point. The 11-34-inch channel allows for 5 distinct height adjustment positions. VERSATILE FIT. This coupler channel features an inside width of 3 inches and 2-inch on-center bolt pattern to accept a CURT channel-style lunette ring or coupler bolt kit 48620 sold separately. TOUGH BUILD. This lunette ring coupler channel mount is constructed from solid, one-piece, formed steel for superior strength. WELD-ON OPTION. This coupler channel comes with a raw steel finish to be easily welded into place and painted with the finish of your choice. It also features holes in the back for a bolt-on option hardware not included.

Rated to 7,500 lbs. gross trailer weight and 750 lbs. tongue weight. Fits trailer hitches with a 2 x 2 receiver tube opening. Factory-torqued CURT trailer ball accepts a 2 coupler. 6 drop for precise trailer leveling, particularly with larger trucks. Hollow shank weighs less and can be used with an anti-rattle kit.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 34 diameter holes are spaced 1-14 from center to center. Fits 2-12 x 2-12 hitch receiver tube opening with 58 hitch pin hole.

UNIVERSAL TOWING. Provides either 6 drop or 5-14 rise capacity. SMOOTH TOWING. Built-in anti-rattle feature stops unwanted noise and vibrations. HIGH CAPACITY. 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-516-inch ball is rated for 14,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch trailer hitch receiver. WEATHER-RESISTANT. To protect it against the elements, this adjustable ball mount is finished with a durable black powder coat, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

Versatile Multi-Ball HeadEquipped with 1-78, 2, and 2-516 chrome hitch balls to connect different trailers with ease. Supports up to 6,000 lbs, 7,500 lbs, and 10,000 lbs GTW, making it ideal for utility trailers, campers, boats, and more.. Adjustable hitchThe height-adjustable shank allows quick and precise 4-12 height adjustments, enabling adaptation to lifted trucks, SUVs, and standard vehicles. Ensures a level trailer for safer, more stable towing.. Integrated Tow RecoveryFeatures a built-in 34 D-ring shackle 7,500 lbs rating, providing multiple connection options for recovery, pulling, and off-road support.. Dual-Lock SecurityIncludes a dual-locking system that secures both the hitch pin and the adjustable ball mount. Helps prevent theft and ensures the hitch stays firmly in place during towing.. Heavy-Duty ConstructionMade with solid steel and chrome-plated balls for superior strength, rust resistance, and long service life. Compatible with all standard 2-inch receivers for fast and easy installation..

Replaces shank for adjustable ball mount 45799 or 45049. Rated for up to 10,000 lbs. GTW limited to lowest-rated towing component. Mounts on trailer hitches with a 2 x 2 receiver tube opening. Shank can be flipped for a drop or rise of 5-34, allowing for precise trailer leveling. Protected by a durable powder coat finish.

HIGH STRENGTH Adjustable trailer hitch ball mount is rated for 7500 lbs gross trailer weight this hitch adapter is constructed from quality steel to offer dependable strength. ADJUSTABLE HITCH The 9-12 drop 8-14 rise drop hitch offer flexible adjustment. The pins hold hitch balls in place and allow for a quick change-out system. VERSATILE USAGE ANTI-THEFT FEATURES Our adjustable trailer hitch ball mount can perfectly fit any connector of trailer, rear bumper, agricultural machines and dual receiver extender with the same size, aluminum shank can be adjusted according to your needs.Each hitch ball mount includes a combination of a set of lock and two keys. CORROSION-RESISTANT With high-quality construction and a black powder-coated finish, the hitch extender is durable and resistant to rust, corrosion, and UV damage, providing long-lasting protection for your vehicle against scuffs, scratches, and even dents. ATTENTIVE AFTER-SALES SERVICE Our attentive after-sales service ensures that any installation or product issues are promptly addressed. INSTALLATION TIP Tighten the nut under the trailer ball with a tool. Make sure the open screw above it is level when fully tightened.Always check that all parts are secure before towing to ensure safe driving.

EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer CURT channels 48610 and 48650 recommended, sold separately. SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing. PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-inch diameter trailer ball. HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 7,000 lbs. gross trailer weight and 1,050 lbs. tongue weight. CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.

Replacement for CURT adjustable channel mount 45900 or 45907 anti-rattle not included. Fits trailer hitches with a 2 x 2 receiver tube opening. Rated for 14,000 lbs. GTW and 1,400 lbs. TW limited by lowest-rated towing component. Adjustable channel mount allows for precise trailer leveling, and two hitch pin holes provide shank lengths of 11 or 12. Protected by a highly durable carbide powder coat finish.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The shank can be flipped to provide up to a 7-12-inch drop or 6-14-inch rise. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. It is rated for a capacity of 5,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. TOW BALL READY. This adjustable drop hitch comes ready to accept a trailer hitch ball for dependable towing. The ball hole is able to mount a trailer ball with a 1-inch diameter shank for powerful towing. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable black powder coat finish.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The shank can be flipped to provide up to 5-34-inch drop or rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 1-78-inch ball is rated for a capacity of 6,000 lbs., the 2-inch ball for 7,500 lbs. and the 2-516-inch ball for 10,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable black powder coat finish, and the three hitch balls are protected with a corrosion-resistant chrome plating.

No More Hitch Sizing Stress Orion Motor Tech's trailer hitch ball mount comes with a standard 2 in. receiver, 2 in. ball, 9-12 in. drop, and 8-14 in. rise for secure towing. Tow everything from fishing boats to RVs, campers, and utility trailers. Take on Any Haul This Class III towing hitch is rated for 8,000 lb. GTW and SAE J684 tested for safety. Tow your fully loaded F-150 across the country or haul your next big adventures with total confidence and zero sway. Top-Tier Trailer Security Each locking pin is upgraded to a high-level anti-theft lock, ready to use with one key, offering solid protection for your trailer, keeping your load secure, and giving you confidence in safe towing every time. Built to Resist the Elements The powder-coated hitch arm and zinc-plated 40Cr steel ball stand up to rain, snow, and salt. Whether you've been towing in snowy winter conditions or near the coast, a quick rinse restores its fresh, like-new shine. Skip the Tools Our pre-assembled ball hitch eliminates the need for any tools. Simply slide it into the receiver and secure it in seconds, getting you on the road faster than buckling your seatbelt.

VERSATILE TOWING - This pintle hook hitch equips your truck to tackle heavy-duty towing jobs in construction, agriculture, military settings and more. The pintle hook can be coupled to virtually any lunette ring with a 2-12-inch to 3-inch inside diameter. SECURE CONNECTION - To ensure a reliable connection to your trailer, this pintle hitch comes with a spring-loaded arm. The arm locks down onto the hook and can be secured with the included safety pin. DEPENDABLE STRENGTH - This pintle hook hitch is rated for a pintle capacity of 30,000 lbs. and a tongue weight capacity of 6,000 lbs. The body is constructed from solid forged steel. WEATHER-RESISTANT - This pintle hook is shielded in a highly durable powder coat finish for long-lasting resistance to rust, chipping and UV damage, in spite of rain, snow, mud and other outdoor elements. EASY TO INSTALL - This pintle hitch is easy and secure to install, using the included bolt kit. It is designed to mount onto any CURT pintle mount, including an adjustable pintle hitch mounting plate for convenient height adjustment and level towing.

Fits trailer hitches with a 2 x 2 receiver tube opening. Mounts any CURT adjustable pintle hook or ball pintle combination. Face plate holes spaced apart 1-34 high x 3-516 wide. Six-position height adjustment allows for precise trailer leveling. Shank constructed from solid steel for optimum strength.

3 inside diameter fits pintle hooks, ball pintle combinations or clevis bars. Compatible with CURT channels 48610 or 48650. Adjustable channel mount allows for precise trailer leveling. 2 bolt pattern spread for simple, secure attachment. Constructed from forged steel for superior strength.

Mounts on trailer hitches with a 2 x 2 receiver tube opening. Adjustable channel mount allows for precise trailer leveling. Shank can be flipped for a max rise of 5-14 and drop of 6. Fits 2-516 couplers or lunette eyes with a 2-12 or 3 inside diameter. Spring-loaded locking arm for secure coupling.

All-in-One Tri-Ball Convenience Three ball sizes 1-78, 2, 2-516 let you tow multiple trailers without swapping mounts perfect for mixed fleets and seasonal towing.. Engineered Strength Ratings Rated 10,000 lbs GTW and 1,000 lbs Tongue Weight designed to meet everyday towing demands while maintaining safety margins.. Height Adjustability 5 risedrop adjustment for level towing and safer handling quick to reposition for different vehicletrailer height combinations.. Secure Hookup Theft Protection Includes heavy-duty hitch pin lock and tri-pins to keep your ball mount secured to the receiver and deter theft.. Durable Construction Easy Fit CNC-machinedwelded steel construction with a corrosion-resistant finish for long life fits standard 2 receiver and installs in minutes with basic tools..

Versatile Towing CapacityIncludes 1-78 6,000 lbs, 2 7,500 lbs, and 2-516 10,000 lbs chrome trailer balls, allowing quick switching between different trailer types without additional tools.. Adjustable hitch The adjustable design provides a precise 4-12 rise and drop, ensuring level and safe towing for trucks, SUVs, and trailers with varying height requirements.. Heavy-Duty Tow Hook D-RingEquipped with a heavy-duty tow hook and a swivel D-ring shackle for recovery, pulling, and off-road use, offering greater versatility beyond standard towing.. Double Security Lock SystemComes with two 58 galvanized trailer locks with keys and a 4 silver pin, ensuring secure ball adjustment and hitch attachment. Lock caps protect against moisture, dust, and rust for all-weather performance.. Durable Build Quick InstallationConstructed with premium steel and a corrosion-resistant coating for long service life. Fits standard 2 receivers and installs quickly for everyday towing needs..

FITS 2.5 RECEIVER ONLYVERSATILE COMPATIBILITY- FITS 99 TOWING NEEDS - This Koerdo Adjustable trailer hitch with 2.5 inch receiver effortlessly fits a wide arrange of connectors including heavy Trucks, RVS, Farm Trailers, Cargo Trailer, Live stock trailer, Campers and even off-road vehicles like ATVS and Motorcycles. So whether you are towing a small utility trailer or a heavy duty camper, this hitch will never let you down.. ADJUSTABLE DUAL BALLS, 6 DROPRISE - The 2hitch ball is with towing capacity of15000lbs and the 2-516 hitch ball is with 22000lbs towing capacity which allows for 6drop down depth and 6rise height so the hitch can be easily switched to different trailers without having to worry about it not sitting level.. SUPER SOLID, NICE WEIGHT, PULLS GREAT - Unlike standard ball hitches, this one is made from solid bar stock, NOT HOLLOW TUBING. Constructed from high quality iron alloy and finished with a corrosion-resist and black power coat and zinc plating and Flawless welds, it can withstand the toughest towing conditions. Rain, Water, Dust and sand are no match for this hitch. The solid and reliable solder joints, along with the 8mm thick steel shank, provide the confidence needed for heavy duty towing.- A Trailer that may outlive your truck.. NO PLAY, NO SWAY, Upgraded NO-RATTLE Measures? 3 silencer pads 8 O rings to reduce the sound between shank and the receiver Rubber washers between the connecting part of ball and channel to reduce Noise and prevent wobbling. All these help cut down any of the noise the trailer may have. Enjoy your quiet lovely journey. FLEXIBLE ADJUSTABILITY --The 6 adjustable ball mount is a standout feature of this hitch. Its ability to drop or rise in 1 increments provides the perfect fit for trailers of different heights. No more hassle of swapping hitches for different vehicles or trailers. you can easily adjust the height to achieve a level towing setup, ensuring a smooth and stable ride every time..

DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 7,500 pounds gross trailer weight and 750 pounds tongue weight limited to lowest-rated towing component. VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 4-inch drop and 2-inch rise to promote level towing. READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank trailer ball sold separately. CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats. EASY TO INSTALL. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank in place with a hitch pin sold separately.

EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer CURT channels 48610 and 48650 recommended, sold separately. PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-516-inch diameter trailer ball. EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball. HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 15,000 lbs. gross trailer weight and 2,250 lbs. tongue weight. CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.

Fits trailer hitches with a 2 x 2 receiver tube opening. Equipped with a 1 hole to accept a trailer ball shank. 6 rise or 8 drop for precise trailer leveling. Hollow shank weighs less and can be used with an anti-rattle kit. CNC-formed, robotically welded and mechanically descaled for a perfect fit.

HIGHLY ADJUSTABLE. This high-strength pintle hitch mount provides maximum vertical adjustment to ensure level towing. It offers 6 height adjustment positions with a 12-12-inch plate height for use in drop position only. VERSATILE. This adjustable pintle mount is compatible with multiple accessories to accommodate different types of towing. The face plate holes are spaced apart 1-34 inches high by 3-516 inches wide. STANDARD FIT. For maximum convenience and an easy installation whenever needed, this pintle hitch mounting plate features a 2-12-inch x 2-12-inch shank to fit virtually any industry-standard 2-12-inch hitch receiver. SOLID STRENGTH. For dependable towing on the job, this pintle mount is rated for 20,000 lbs. gross trailer weight. The shank and mounting plate are constructed from solid steel with a high-strength design. WEATHER-RESISTANT. This pintle hitch mounting plate is finished to long outlast the outdoor elements, featuring a durable carbide black powder coat finish. This protects the steel against rain, snow, mud, road salt and other corrosive threats.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-34-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. It is rated for a capacity of 6,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-516-inch ball for 20,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-12-inch x 2-12-inch trailer hitch receiver. It's perfect for heavy-duty class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

Allows for secure mounting of the spring bars on trailer frames up to 8. Multiple mounting holes for precise leveling of the load. Rigid design helps maximize integrated sway control. Bracket protected by a highly durable carbide powder coat finish.

AMERICAN OWNED, FAMILY OPERATED - Join the Rhino Family Support a USA based FatherSon Business. REAL LIFETIME REPLACEMENT PROGRAM - At Rhino USA, we stand behind our products. If you have any questions or comments, feel free to reach out to one of our friendly and knowledgable customer support representatives and we will get you taken care of. INDUSTRY LEADING STRENGTH - 2-Inch Hitch Ball GTW Towing Capacity of 8,000lbs Reversible 2-516 Ball with a 12,500lb GTW Towing Capacity for Hauling Heavy Trucks, RV, Trailer, Camper More. DESIGNED FOR 2 RECIEVERS - This Drop Hitch Is Specifically Designed For Use With Class 3 and 4 Trailer Hitch Recievers Commonly Found on 12 Ton Trucks and SUV's. This Hitch is Compatible with Dodge Ram 1500, Jeep Wrangler Cherokee, Chervrolet Silverado GMC Sierra 1500, Ford F-150 Ranger, Toyota 4 Runner Tundra Tacoma, Nissan Titan More. IDEAL FOR VEHICLES WITH LEVELING KITS STOCK RIDE HEIGHT This Hitch Provides 6 of Drop, Which Will Allow Users to Level Tow Trailers With Recievers 18 - 20 From The Ground.

TOUGH BUILD. Constructed from high-strength steel, this multi-use adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 8,000 pounds, and the 2-516-inch ball for 10,000 pounds. ONLY 15 POUNDS. Though it offers an exceptional weight rating of 10,000 pounds maximum, this adjustable multi-ball hitch only weighs 15 pounds. This makes it easy to handle and carry. HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 3-34-inch drop or 3-12-inch rise. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most pickup trucks and class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this compact adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

ADJUSTABLE HEIGHT DUAL BALL VERSATILITY The Tow Stow adjustable ball mount lets you pull your boat to the lake, mower to the shop, or tractor to the job site using the same hitch. Simply pull the two stainless steel adjustment pins to raise or lower the hitch for proper, level towing, then rotate the ball assembly to switch between 2 inch and 2-516 inch ball sizes to match different trailer couplers.. STOWABLE DESIGN FOR EVERYDAY DRIVING When towing is complete, the Tow Stow rotates under the vehicle and stores neatly out of the way. This stowable design helps prevent painful shin impacts and avoids contact with low garage doors, keeping the hitch accessible but safely tucked away until its needed again without removing it from the receiver.. SECURE ANTI-THEFT CONSTRUCTION Designed with built-in security, the Tow Stows adjustable arm cannot be removed once the hitch is locked into most 2 inch receivers. By rotating the hitch under the vehicle and reinserting the pins, the ball mount stays securely in place, helping deter theft while keeping the hitch ready for your next tow.. RUGGED AMERICAN-MADE STEEL BUILD Constructed from high-strength American-made steel, this adjustable ball mount is engineered for demanding use. A corrosion-resistant two-layer finish, including an e-coat base and ironclad black powder coat, protects against rust, chips, and wear, making it suitable for hauling equipment during the week and launching the boat on weekends.. MADE IN USA WITH LIFETIME WARRANTY Manufactured and assembled in Humboldt, Kansas, the Tow Stow reflects BWs commitment to quality craftsmanship and Midwest values. Backed by BWs Limited Lifetime Warranty, this hitch is built to deliver long-term confidence, with support available if damage occurs due to accidents or misuse..

Rated to 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Fits trailer hitches with a 2 x 2 receiver tube opening. Factory-torqued CURT trailer ball accepts a 2-516 coupler. Constructed from solid, forged steel for superior strength. 2 drop for precise trailer leveling.

EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer CURT channels 48610 and 48650 recommended, sold separately. SECURE COUPLING. The sleeve-lock latch mechanism of this trailer tongue coupler fully encompasses the trailer ball when coupled, providing maximum security and safety for towing. PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-516-inch diameter trailer ball. HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 12,500 lbs. gross trailer weight and 1,875 lbs. tongue weight. CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.

Compatible with any CURT adjustable channel mount. Fits 2 couplers or lunette eyes with a 2-12 or 3 inside diameter. Spring-loaded locking arm for secure coupling. Protected by a highly durable carbide powder coat finish. Changeable trailer ball features a hard chrome finish.

EASY TO ADJUST. This high-strength pintle hitch mount provides easy vertical adjustment to ensure level towing of your truck and heavy-duty trailer. It offers 3 height adjustment positions with a maximum drop of 6-12 inches. VERSATILE. This adjustable pintle mount is compatible with multiple accessories to accommodate different types of towing. The face plate holes are spaced apart 1-34 inches high by 3-516 inches wide. STANDARD FIT. For maximum convenience and an easy installation whenever needed, this pintle hitch mounting plate features a 2-12-inch x 2-12-inch shank to fit virtually any industry-standard 2-12-inch hitch receiver. SOLID STRENGTH. For dependable towing on the job, this pintle mount is rated for 18,000 lbs. gross trailer weight. The shank and mounting plate are constructed from solid steel with a high-strength design. WEATHER-RESISTANT. This pintle hitch mounting plate is finished to long outlast the outdoor elements, featuring a durable carbide black powder coat finish. This protects the steel against rain, snow, mud, road salt and other corrosive threats. Material Blank.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 34 diameter holes are spaced 1-14 from center to center.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 34 diameter holes are spaced 1-14 from center to center.

Levels tow vehicle and trailer by redistributing a portion of the tongue weight. Includes sway control kit 17200 to help reduce trailer sway. Grease zerk fitting provides easy, continuous lubrication. Grease must be applied to the zerk in order to lubricate. Equipped with round, forged steel spring bars for reliable strength.

Integrated sway control reduces sway and levels the vehicle and trailer. Two points of sway control use friction to keep trailer aligned. Brackets use friction to resist lateral movement. Adjustable brackets provide fixed support unlike spring bar chain models. Head tilt adjustment feature simplifies setup and eliminates the need for washers.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-516-inch ball for 14,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable pintle hitch. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-14-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable pintle hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from steel, this adjustable hitch pintle mount is ready to work. The 2-516-inch ball is rated for a capacity of 20,000 lbs. The pintle hook design can also couple to lunette rings 2-12 or 3-inch inside diameter. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-12-inch x 2-12-inch trailer hitch receiver. It's perfect for heavy-duty class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable pintle hitch is shielded in a durable carbide black powder coat finish, and the hitch ball is protected with a corrosion-resistant zinc plating.

ADJUSTABLE VERSATILE Onsski's trailer hitch fits 2-inch receiver, offering versatile installation options. Easily adjust to varying heights, with a generous 6-inch droprise capacity. Dual balls, measuring 2-516 and 2, ensure strong towing capabilities up to 12,500 lbs GTW and 8,000 lbs, respectively.. SECURE DURABLE Safety is always our first priority, this hitch is built from upgraded high-strength aluminum. it's built to withstand harsh conditions, ensuring long-lasting reliability.. ANTI-THEFT PROTECTION Includes 2 stainless steel hitch pin locks with 3 unique keys, safeguarding your hitch and trailer from theft. Each lock cylinder is unique, providing added security and peace of mind.. NOISE REDUCTION DESIGN Equipped with 4 hitch silencers, this towing hitch reduces road rattle and noise, enhancing your towing experience. Fits snugly on most 2-inch tow mounts, extending the lifespan of your equipment.. WARRANTY SUPPORT Count on Onsski's professional service team for expert advice and support. With a commitment to customer satisfaction, we offer a range of RV trailer accessories and stand behind our products..

?MUST CHECK Before Buying WRONG SIZE WON'T FIT1 Measure your receiver's inner size. This link is ONLY for 2 x 2 receivers. If yours is 2.5 x 2.5, please search for our 2.5-inch model. 2 Measure your receiver's outer width. It MUST NOT exceed 3.5 usable length of lock pin. 3Check your trailer coupler size. This hitch features a dual ball that fits both 2 and 2-516 couplers.. Your Universal Tow Link Ready for Your 2 ReceiverDesigned for the universal 2-inch receiver, this tailer hitch is your reliable connection to a vast range of towing tasks. It works effortlessly with heavy trucks, RVs, diverse utility trailers, campers, and off-road vehicles like ATVs. No matter your loadfrom a small utility trailer to a substantial camperthis hitch provides dependable performance, trip after trip.. Master Any Height Match 6 Drop or RiseThis tow hitch is a universal solution for vehicle-to-trailer height discrepancies. Simply install it facing up for a higher trailer or down for a higher vehicle, then fine-tune the level with 1-inch increments. Our step-by-step guides and videos make setup quick and easy.. Cover Classes III-V Maximum 20,000 LBS GTWEliminate the need for multiple hitches. This dual-ball system is designed to handle a wide range of towing needs with reliable strength. The interchangeable 2-inch ball supports up to 15,000 lbs, while the 2-516-inch ball is rated for serious capacities up to 20,000 lbs, making it ideal for heavy trailers and RVs. The ball hitch is the strong, smart foundation for Class III to V towing.. Forged from Alloy Steel The U-Shaped Anti-Theft LockThe instant one-press locking adds unmatched convenience to your routine, while the high-strength, U-shaped alloy construction prevents theft and eliminates worries about it shaking loose on rough roads. The precision-engineered lock cylinder works smoothly, season after season, for dependable security that doesn't complicate your day.. Built for the Long Haul, Engineered to OutlastThe drop hitch use SOLID SHANK instead of hollow tube to eliminate twisting under load. This foundational strength is complemented by a reinforced 9.5mm thick U-channel, dual reinforcement beams, and an alloy steel locking pin designed to handle significant force. The result is unwavering stability and the rock-solid confidence you need for every tow.. LESS NOISE, LESS SWAY, 3 UPGRADED MEASURESOur truck hitch use a combination of ? 8 O-rings, 3 square silencer pads, and 2 hitch ball side pads to eliminate movement and noise where it happensat the lock, between the receiver and shank, and between the U-channel and the hitch ballfor a perfectly quiet tow..

? MUST CHECK Before Buying WRONG SIZE WON'T FIT1 Measure your receiver's inner size. This link is ONLY for 2.5 x 2.5 receivers. If yours is 2 x 2, please search for our 2-inch model. 2 Measure your receiver's outer width. It MUST NOT exceed 3.5 usable length of lock pin. 3 Check your trailer coupler size. This hitch features a dual ball that fits both 2 and 2-516 couplers.. Your Universal Tow Link Ready for Your 2.5 ReceiverDesigned for the universal 2.5-inch receiver, this tailer hitch is your reliable connection to a vast range of towing tasks. It works effortlessly with heavy trucks, RVs, diverse utility trailers, campers, and off-road vehicles like ATVs. No matter your loadfrom a small utility trailer to a substantial camperthis hitch provides dependable performance, trip after trip.. Master Any Height Match 6 Drop or RiseThis tow hitch is a universal solution for vehicle-to-trailer height discrepancies. Simply install it facing up for a higher trailer or down for a higher vehicle, then fine-tune the level with 1-inch increments. Our step-by-step guides and videos make setup quick and easy.. Cover Classes III-V Maximum 22,000 LBS GTWEliminate the need for multiple hitches. This dual-ball system is designed to handle a wide range of towing needs with reliable strength. The interchangeable 2-inch ball supports up to 15,000 lbs, while the 2-516-inch ball is rated for serious capacities up to 22,000 lbs, making it ideal for heavy trailers and RVs. The ball hitch is the strong, smart foundation for Class III to V towing.. Forged from Alloy Steel The U-Shaped Anti-Theft LockThe instant one-press locking adds unmatched convenience to your routine, while the high-strength, U-shaped alloy construction prevents theft and eliminates worries about it shaking loose on rough roads. The precision-engineered lock cylinder works smoothly, season after season, for dependable security that doesn't complicate your day.. Built for the Long Haul, Engineered to OutlastThe drop hitch use SOLID SHANK instead of hollow tube to eliminate twisting under load. This foundational strength is complemented by a reinforced 9.5mm thick U-channel, dual reinforcement beams, and an alloy steel locking pin designed to handle significant force. The result is unwavering stability and the rock-solid confidence you need for every tow.. LESS NOISE, LESS SWAY, 3 UPGRADED MEASURESOur truck hitch use a combination of ? 8 O-rings, 3 square silencer pads, and 2 hitch ball side pads to eliminate movement and noise where it happensat the lock, between the receiver and shank, and between the U-channel and the hitch ballfor a perfectly quiet tow..

Fits trailer hitches with a 2-12 x 2-12 receiver tube opening. Constructed from solid, forged steel for superior strength. Equipped with a 1-14 hole to accept a trailer ball shank. 6-12 rise or 8 drop for precise trailer leveling. Protected by a highly durable carbide powder coat finish.

DEPENDABLE STRENGTH This trailer hitch is rated for 4,500 lbs. gross trailer weight, 675 lbs. tongue weight, 4,500 lbs. weight distribution capacity and 675 lbs. weight distribution tongue weight limited to lowest-rated towing component. VERSATILE DESIGN This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. FULLY TESTED Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling. RUST, CHIP, UV-RESISTANT This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays. EASY TO INSTALL This hitch offers a custom, factory fit on select model years of the RAV4, NX250, NX350, NX350h, and NX450h.

Levels tow vehicle and trailer by redistributing a portion of the tongue weight. Includes sway control kit 17200 to help reduce trailer sway. Grease zerk fitting provides easy, continuous lubrication. Grease must be applied to the zerk in order to lubricate. Equipped with round, forged steel spring bars for reliable strength.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. 34 diameter holes are spaced 1-14 from center to center. Fits 2 x 2 hitch receiver tube opening with 58 hitch pin hole.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 34 diameter holes are spaced 1-14 from center to center.

Integrated sway control actively resists sway and levels the vehicle and trailer. Four points of sway control work together to keep trailer aligned. Welded head with cast pieces and trunnion-style forged steel spring bars. Uses spring cam system with hardened components, instead of friction alone. Adjustable brackets provide fixed support unlike spring bar chain models.

Allows for secure mounting of the spring bars on the trailer frame. Multiple mounting holes for precise leveling of the load. Rigid design helps maximize integrated sway control. Bracket protected by a highly durable carbide powder coat finish.

Replaces coupler latch in CURT posi-lock couplers for 2-inch trailer balls coupler sold separately. Fits couplers with 2-inch, 2-12-inch or 3-inch channel widths trailer tongue width. Spring and nut posi-lock mechanism allows for easy adjustment. Features holes to accept a safety pin or coupler lock. Constructed from high-strength steel and protected by a durable zinc-plated finish.

EASILY ADJUSTABLE. Designed to mount onto a vertical channel bracket, this trailer hitch coupler can easily be adjusted up or down to ensure level towing across your vehicle and trailer CURT channels 48610 and 48650 recommended, sold separately. PRECISE FIT. This trailer coupler can be mounted on a wide variety of heavy-duty trailers and couple to any standard 2-516-inch diameter trailer ball. EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball. HIGH-STRENGTH. Constructed from heavy-duty cast steel, this trailer ball coupler has a capacity of 14,000 lbs. gross trailer weight and 2,100 lbs. tongue weight. CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this adjustable trailer coupler is finished in a durable black powder coat.

Compatible with CURT adjustable channel mount 45907. Fits 2-516 couplers or lunette eyes with a 2-12 or 3 inside diameter. Spring-loaded locking arm for secure coupling. Protected by a highly durable carbide powder coat finish. Includes pintle attachment only channel mount sold separately.

Compatible with CURT adjustable channel mount 45908. Fits 2-516 couplers or lunette eyes with a 2-12 or 3 inside diameter. Spring-loaded locking arm for secure coupling. Protected by a highly durable carbide powder coat finish. Includes pintle attachment only channel mount sold separately.

ADJUST AND GO Easily change the height of your hitch and be prepared for varying load weights and trailer styles. The dual ball attachment eliminates the need to carry extra attachments by providing two ball sizes in one when used with CURT WD shanks. COMFORTABLE TOWING Anti-rattle technology promotes a quieter and smoother ride by preventing loud noises from the receiver coupling while towing, making for a more comfortable, quiet and worry-free ride for passengers. EASILY ADJUSTABLE This dual ball attachment works with the CURT adjustable trailer hitch ball mount 17100 or deep-drop adjustable trailer hitch ball mount 17123. BUILT TO LAST Forged from steel for rigorous use and longevity, the 2 chrome plated ball is rated for towing up to 10,000 lbs. and the 2-516 ball is rated for towing up to 15,000 lbs. WEATHER-RESISTANT FINISH Finished with a durable carbide powder coat finish, this hitch is weather- and rust-resistant and built to avoid corrosion for a long life and clean look.

EASY TO ADJUST. This high-strength pintle hitch mount provides easy vertical adjustment to ensure level towing. It offers 3 height adjustment positions with a maximum drop of 6-12 inches for use in drop position only. VERSATILE. This adjustable pintle mount is compatible with multiple accessories to accommodate different types of towing. The face plate holes are spaced apart 1-34 inches high by 3-516 inches wide. STANDARD FIT. For maximum convenience and an easy installation whenever needed, this pintle hitch mounting plate features a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch hitch receiver. SOLID STRENGTH. For dependable towing on the job, this pintle mount is rated for 15,000 lbs. gross trailer weight. The shank and mounting plate are constructed from solid steel with a high-strength design. WEATHER-RESISTANT. This pintle hitch mounting plate is finished to long outlast the outdoor elements, featuring a durable carbide black powder coat finish. This protects the steel against rain, snow, mud, road salt and other corrosive threats.

Fits trailer hitches with a 2-12 x 2-12 receiver tube opening. Mounts any CURT adjustable pintle hook or ball pintle combination. Face plate holes spaced apart 1-34 high x 3-516 wide. Three-position height adjustment allows for precise trailer leveling. Shank constructed from solid steel for optimum strength.

AUTO-LOCKING - This SecureLatch pintle ball hitch automatically couples to a lunette ring, featuring an auto-lock. Just back up and strike the back plate. Drop the lunette ring, and the primary latch auto engages. Just insert the secondary safety pin. REDUCED CHUCKING - This pintle hook and ball hitch is quieter and smoother than other pintle hitches, featuring a unique cupped design. It holds the ring tighter fore and aft to reduce play and chucking noise. SUPERIOR STRENGTH - The SecureLatch pintle hitch is constructed from cast iron and is austempered for superior strength and wear resistance. It is rated for 20,000 pounds gross trailer weight and 14,000 pounds ball capacity. DURABLE FINISH - For corrosion resistance, this pintle hook hitch has a dark grey teridium powder coat finish. STANDARD FIT - This ball and pintle combination has a 2-516-inch tow ball and will couple to any lunette ring with a 2-12-inch or 3-inch inside diameter. It is designed to mount onto a SecureLatch slotted pintle mount sold separately.

Provides an adjustable mount for any CURT weight distribution hitch. Rated for 15,000 lbs. gross trailer weight and 1,500 lbs. tongue weight. Features multiple holes for adjustable head height. Can be flipped to provide necessary drop or rise. 34 diameter holes are spaced 1-14 from center to center.

Ideal for dinghy towing a small vehicle behind an RV. Rated for 5,000 lbs. gross towed vehicle weight. Adjusts in width from 26 to 41. Features a 2 heavy-duty coupler. Brackets mount to the frame of the vehicle trimming may be required.

DEPENDABLE STRENGTH - Rated to tow 7,500 pounds gross trailer weight and 750 pounds tongue weight, this ball hitch offers dependability for your towing setup weight capacity may change if trailer ball is removed. VERSATILE USE - This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount has a 2-inch drop, 2-inch diameter ball, 58-inch pin hole and 7-12-inch overall length. READY TO TOW - Hitching up your trailer is easy with this ready-to-use trailer hitch ball mount. It comes with a pre-attached tow ball for ready coupling and a trailer hitch pin to securely mount onto your hitch receiver. CORROSION-RESISTANT - For long-lasting use, this ball hitch is protected with a durable black powder coat finish, and the trailer ball has a polished chrome plating. EASY TO INSTALL - To install the trailer hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank, included hitch pin and pre-torqued trailer ball make installation easy.

Hitch receiver compatibility This Mega-Duty Towing Hitch is designed to fit a 2-inch hitch receiver, offering a robust and reliable connection for your towing needs. Its adjustable trailer hitch feature ensures it fits a variety of setups.. Superior towing capacity Capable of handling up to 16,000 pounds max towing capacity and 2,000 pounds max tongue weight, this truck hitch is engineered for heavy-duty towing, ensuring safety and efficiency on the road.. Enhanced durability Fabricated with heavy-duty steel and powder-coated for protection, this locking hitch pin design ensures longevity and resistance against the elements, making it an ideal towing hitch for all environments.. Exceeds Standards All Gen-Y Hitch products are made right here in the USA and exceed the SAE-J684 Weight Testing Requirements. Tow capacity is limited by lowest rated components. A stabilizer kit recommended for drops over 12.5 inches.. Complete hitch package Includes dual 2 516 inch and 2 inch ball mounts with pintle lock, along with two stainless steel hitch pins. This 7.5 hitch with 4 adjustable positions offers versatility and security for your towing needs..

HIGHLY VERSATILE - The trailer hitch can fit any connector of trailers, rear bumpers, campers, off-road car, agricultural machines and dual receiver extender with the same size. Adapt your 2 inch trailer hitch to any towing situation with the versatility and easily adjustable design.. POWERFUL TOWING CAPACITY - Engineered with a 14,000 LBS structural rating. The integrated dual-ball system adapts to your load the 2-516 ball offers an industry-leading 12,500 lbs capacity, while the 2 ball supports up to 8,000 lbs. Perfect for everything from heavy-duty RVs to daily towing.. 6 ADJUSTMENT HEIGHT - Adjustable trailer hitch also offers a 6 drop depth and 6 rise height for easy adjustment at 1 inch speed to fit for any trailer height, so the tow hitch can be easily adjustable for optimal towing with no need to ever change hitches for different vehicles.. PREMIUM MATERIAL - The heavy duty drop hitch are made from premium Aluminum with advanced oxide technology applied on the finish, which makes the tow hitch anti-rust, water-resistant and corrosion resistant and durable in harsh environment. Also the tow hitch is with milled rounded corner for easy inserting.. TRIPLE-SECURE SYSTEM - Features two stainless steel keyed-alike locks and an extra safety pin. One lock secures the hitch to your vehicle, while the lock pin combo provides redundant safety for height adjustment. Managed by a One-Key system, it offers maximum theft protection with zero hassle..

HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 10-18-inch drop or 9-18-inch rise. SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point. POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-516-inch ball for 14,000 lbs. PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches. WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating.

ADJUST AND GO - The adjustable style shank allows for a drop of 5-12 and rise of 4-12 for quick and precise trailer leveling. The dual ball attachment eliminates the need to carry extra attachments by providing two ball sizes in one. COMFORTABLE TOWING - Anti-rattle technology promotes a quieter and smoother ride by preventing loud noises from the receiver coupling while towing, making for a more comfortable, quiet and worry-free ride for passengers. UNIVERSAL COMPATIBILITY - This 2 x 2 adjustable ball hitch is compatible with any standard 2 trailer hitch receiver and is compatible with most class 3, class 4 and class 5 receivers. BUILT TO LAST - Forged from steel for rigorous use and longevity, the 2 chrome plated ball is rated for towing up to 10,000 lbs. and the 2-516 ball is rated for towing up to 15,000 lbs. WEATHER-RESISTANT FINISH - Finished with a durable carbide powder coat finish, this hitch is weather- and rust-resistant and built to avoid corrosion for a long life and clean look.

Curt Manufacturing 45951 Rebellion Adjustable Cushion Hitch Adjustable.