The Nurge adjustable embroidery seat stand is made from hard beechwood, fine sanded and polished for a super smooth natural wood finish. They are the crafters choice for quality.. It is height adjustable joint minimum height about 5cm 2inch, maximum height about 50cm 20inch The seat embroidery stand allows easy embroidering using both hands.. The Adjustable Seat Embroidery Stand allows easy embroidering using both hands. It can be used as a table-top stand but is ideally designed to be a seat stand by sitting on the lower base tucked under your legs allowing comfort and creativity at the same time. The stand has 3 adjustable joints plus the final hoop holding knuckle join that will pivot to any angle so that you can find the optimum height, distance and angle depending on your hoop size for maximum comfort whilst creating your next master piece.. The stand will hold any size hoop diameter Typically 100mm to 310mm 4 to 12 and hoops up to and including 16mm deep it will fully extend out to 50cm 20.. The stand is also good for holding tapestry frames up to 75cm 30. Please note This embroidery stand does not include the embroidery hoop..

Hands-Free Dual Clamp DesignThis embroidery hoop stand uses dual swivel clamps to secure your table and hoop, freeing both hands for stable, comfortable cross stitch, embroidery, and needlework.. 360 Fully Adjustable AngleRotate and tilt your embroidery hoop 360 to any position for maximum comfort, helping reduce neck, shoulder, and hand strain during long embroidery sessions.. Heavy-Duty Metal, No WobbleBuilt from durable metal, this embroidery hoop stand stays firmly in place without shaking, even during detailed or repetitive stitching work.. Protective Anti-Slip PaddingSoft rubber pads on both clamps protect your embroidery fabric, hoops, and tabletop from scratches while providing a secure, non-slip grip.. Universal Fit Portable SizeCompatible with most round or square embroidery hoops and various table thicknesses. Compact size makes it easy to store or carry for home or travel crafting..

Assorted embroidery frames the package comes with 3 pieces of embroidery frames and hoops in 3 sizes, they are respectively approx. 6 x 6 inch, approx. 8 x 8 inch, and approx. 11 x 11 inch, various enough for your different using demands in daily life. Reliable material these square embroidery hoop frames are made of quality ABS, compact and sturdy, well polished with smooth surfaces, comfortable for you to grip, lightweight and flexible, hardly adding extra burden to your hands. A variety of applications these sewing frames are suitable for many crafting projects, specifically, they can be applied to embroidery, sewing, cloth painting, quilting, cross-stitch, needling, silk painting and more, bringing you lots of convenience. Convenient to operate to assemble the white embroidery hoop, you just need to connect these straight tubes to these 90 degrees tubes, forming a rectangle frame, then fix your embroidery cloth on it with clips, not occupying too much time and energy, besides, you can easily disassemble the frame by hand, no tools needed. Thoughtful design these cross stitch square frames are equipped with textured slots, which can help you fix your embroidered cloth tightly, not easy to loose or shift, helping you spread the embroidered cloth or paper evenly, making it convenient for you to do next work.

embroidery holders ,appropriate for round, square and other universal embroidery Frame and cross stitch supplies.. lap embroidery stands for hand work lift from 4in to 22INand rotate the frame 360 degree at anytime. you can adjust the tilt in Every direction.. Hand Embroidery Hoops stand widely used on a desk, workbench, table, or bedside table, with built-in rubber pad can easily clip to any desktop up to 1.96 inches5 centimeters thickness. Save Your Hands With ourneedlepoint stand nurge , you don't have to hold the hoop while doing embroidery, get your hands free of cramping and soreness.

Nurge Lap Table Stitchery Stand allows easy embroidering, cross-stitching, or tapestry using both hands and can be used as a tabletop stand or it will sit neatly on your lap. This frame is 30cm 12 high with 30cm 12 wide rods.. Spare 40cm Code 190-3a 60cm Code 190-3b rods are available to order separately.. This beautiful and versatile needlework stand works for a variety of projects- whether your passion is cross-stitch, needlepoint, crewel, embroidery, or small-piece quilting.. These Nurge wooden stands are finely sanded and hand polished for a super smooth natural wood finish. Nurge products are the crafters choice for quality.. The Nurge Stand allows easy embroidering, cross-stitching, or tapestry using both hands and can be used as a tabletop stand or it will sit neatly on your lap to allow you complete comfort whilst creating your next masterpiece. The stand requires simple assembly by inserting the rods into the end frames and tightening up the 4 wing nuts.. The red clips then clip-on and are used to clamp your material in place, you then rotate the rods until your fabric is taut, then tighten up the wing nuts to hold it in place.. Spare rods are available, that fit the stand, to increase the width of the working area 190-3a 40cm width rods Give you a working area of 40cm 16 by 30cm 12 190-3b 60cm width rods Give you a working area of 60cm 24 by 30cm 12.

Ideally Compatible this cross-embroidery stand base features a high-precision side clamp that securely holds Q-Snap and scroll frames, supporting widths up to 20 inches Its strong clamping force keeps even large, heavy frames stable, ensuring consistent tension throughout the embroidery process Finely polished contact surfaces prevent scratching or damaging the frame This stand provides stable support, allowing you to focus on each embroidery stand without frequent adjustments. Multi-directional Adjustment this floor-standing embroidery stand features a 360 rotating clamp, allowing for multi-dimensional adjustment of height, extension depth, and tilt angle, easily adapting to various sitting positions and desktop placements Easily flip the fabric without removing the embroidery hoop, making thread changes and repositioning more efficient The smooth rotating arm and tool-free controls allow for easy one-handed adjustment. Durable and Long-lasting the base of this embroidery hoop frame is made of coated steel, offering structural strength, scratch resistance, and long-lasting durability Unlike wooden frames that may loosen or warp over time, this metal frame remains sturdy even under heavy use and frequent operation Its weighted base enhances stability, keeping large frames firmly. Easy Assembly this needlepoint stand base features a tool-free design for quick and efficient assembly Key components can be tightened by hand All adjustments, including height and clamping force, are tool-free, making the frame simple and intuitive to use This needle and thread holder is ideal for everyday enthusiasts and efficiency-conscious professionals, a reliable choice for every embroidery lover. Hands-free, Easy Sewing the robust construction, height adjustment, and slim design allow for easy placement under most furniture Achieve ideal tension with ease, freeing your hands while sewing.

The Nurge adjustable embroidery seat stand with Swivel Holder is made from hard beechwood, fine sanded and polished for a super smooth natural wood finish. They are the crafters choice for quality.. It is height adjustable joint minimum height about 5cm 2inch, maximum height about 50cm 20inch The seat embroidery stand allows easy embroidering using both hands.. The holder part can rotate 360 degrees and provides great convenience.. Suitable for all embroidery hoops.. The stand is also good for holding tapestry frames up to 75cm 30. Please note This embroidery stand does not include the embroidery hoop..

Stable Grip, No Slippage This adjustable embroidery table stand grooved crossbar with anti-slip clips securely holds fabric in place without damage, providing stable support for precise stitching on any flat surface.. Tool-Free Assembly No extra tools needed for quick setup and disassembly of the hands free cross stitch hoop. Simply snap parts together, adjust fabric tension, and store flat when not in use for space-saving convenience.. Tool-Free Assembly No extra tools needed for quick setup and disassembly of the hands free cross stitch hoop. Simply snap parts together, adjust fabric tension, and store flat when not in use for space-saving convenience.. Ergonomic Design The unique bracket design of the wood embroidery hoop stand allows embroidery hands to shuttle back and forth without obstruction, making embroidery tasks easier and more convenient.. Wide Use This adjustable embroidery stand is an ideal tool for embroidery, cross stitch, needlework, sewing, quilting, tapestries, etc. Its lightweight design makes it suitable for use in tables, beds, chairs, sofas, and other places..

This cross stitch frame stand holds your fabric securely, allowing you to stitch with both hands. The fixed structure provides excellent stability without shaking, making your embroidery smoother and more efficient. Designed for comfortable use on your lap or tabletop. Whether you're sitting on the sofa or working at a desk, this lap stand for cross stitch offers a convenient and ergonomic stitching experience. No complicated adjustments needed. The straightforward structure makes it beginner-friendly and quick to set up, so you can start your embroidery project right away. Made of natural wood with a smooth, polished finish. This needle point stand is durable, sturdy, and comfortable to handle during long crafting sessions. Suitable for cross stitch, needlepoint, embroidery, and other handwork projects. Works well with different embroidery frames for hand work, making it a versatile tool for crafters.

Inclusive Package the knitting pattern holder package includes 1 holder that can be efficiently utilized for different projects simultaneously In addition, the package encompasses 4 sturdy replacement magnets This knitting chart keeper magnetic set aims at providing an enriching knitting experience, enhancing your creativity and productivity. Convenient Size and Color Measuring about 13.78 x 8.27 inches 35 x 21 cm, the knitting pattern holder fits most regular sized knitting patterns, and its sleek black color not only adds a touch of sophistication, but also complements the overall aesthetics of the holder. Quality Material our knitting pattern holder is made of metal, providing an organized workspace for professional and novice knitters, this cross stitch pattern holder is an ideal combination of longevity and aesthetic, a charming and practical accessory for creating beautiful knitting and crochet projects. Replacement Magnets the knitting pattern holder is equipped with 4 magnets in 3 different sizes, including 1 piece of about 7.87 x 0.39 x 0.2 inches, 1 piece of about 4.72 x 0.39 x 0.2 inches, 2 pieces of about 2.36 x 0.39 x 0.2 inches, made of rubber magnets These can be moved to any position on the pattern, ensuring that they are firmly attached to multiple pattern pages This firm fixation prevents the pattern from being misplaced, making knitting work smoother. Wide Application not limited to knitting, it is suitable for viewing files, etc. The knitting pattern holder has a fixed clip and can be applied to a variety of crafts This cross stitch pattern holder enhances your production experience Whether you are knitting, crochet, cross stitch or embroidery, you can easily view the pattern.

Adjustable Design This wood embroidery hoop stand is equipped with 3 sets of wooden poles 15.7 inch, 11.8 inch and 8.2 inch, and the available spare poles allow you to choose the appropriate size of the embroidery fabric.. The stand requires simple assembly by inserting the rods into the end frames and tightening up the 6 wing nuts. The crossbar of the adjustable embroidery stand is designed with grooves, including 8 anti-slip clips, which can firmly fix your fabric without damage, prevent it from moving or slipping during the embroidery process, and better control the needles with both hands.. This embroidery table stand allows easy embroidering, cross-stitching, or tapestry using both hands and can be used as a tabletop stand or it will sit neatly on your lap to allow you complete comfort whilst creating your next masterpiece.

Convenient Set This comprehensive set includes a beech wood embroidery hoop stand, detailed assembly guideline, and 3 premium quality bamboo embroidery hoops 6, 7, and 8. Ideal for embroidery aficionados across all proficiency levels, it provides versatile, durable tools designed for detailed needlework projects. Solid and Durable Build Crafted from solid beech wood, this embroidery stand features a smooth, polished finish that resists moisture and provides a comfortable, snag-free touch. Its natural wood grain and sturdy construction ensure long-lasting stability for various needlework projects, without rough edges that could harm hands or fabric. Fully Adjustable for Ergonomic Stitching The stand offers height adjustment with ranges from 11.8 to 15.7 30 to 40 cm and a 360-degree rotatable clamp, allowing you to customize the angle and distance for optimal comfort. A widened base also enhances the stability. Please tighten the screw timely after adjustments to keep a good grip. Easy Assembly and Versatile Hoop Compatibility Designed for simplicity, it assembles and disassembles quickly with included instructions. The clamp securely holds round, square and other universal embroidery hoops, making it easy to switch between projects. Its compact design allows for convenient storage and portability. Suitable for All Skill Levels and Multiple Uses Ideal for beginners and enthusiasts, this stand supports a range of crafts like cross-stitch, needlepoint, punch needle, and DIY embroidery. It can be used as a lap, table, or floor stand, adapting to different settings such as couches, beds, or tables. The setup minimizes the need to hold hoops manually, promoting healthier stitching habits.

Hands-Free Design for Efficient Crafting Features dual heavy-duty swivel clamps one secures firmly to any table edge, while the other grips your embroidery hoop steadily. Free up both hands to work faster and with greater focus on your cross-stitch, embroidery, and detailed needlework projects.. 360 Full-Angle Adjustment for Ergonomic Comfort Rotate the hoop 360 horizontally and tilt it to any comfortable angle. Easily achieve the perfect ergonomic position to reduce neck and arm strain during long sessions, making your crafting experience more enjoyable and relaxing.. Ultra-Stable Anti-Shake Metal Construction Built from premium heavy-duty metal, this stand delivers rock-solid stability. It effectively minimizes wobbling and shaking, ensuring your hoop stays securely in place for smooth, precise, and uninterrupted stitching.. Compact Portable Space-Saving Solution With a compact folded size of only about 16cm, its significantly smaller than traditional bulky frames. Store it effortlessly in a drawer or carry it in your bagyour perfect companion for crafting at home or on the go.. Scratch-Protective Widely Compatible Equipped with soft, thick rubber pads on both clamps to protect your delicate fabric and table surface from scratches. The wide-grip jaws fit various table thicknesses and securely hold most standard wooden, plastic, round, or square hoops..

Universal Compatibility Cross stitch stand securely holds round hoops, Q-Snap frames, and scroll rods up to 20 inches wide. Needlepoint stand reinforced clamp with polished jaws ensures stable, scratch-free support for all frame types.. Fully Adjustable Embroidery Stand Cross stitch stand floor featuring a 360 rotating head and customizable height, depth, and angle, this stand achieves an optimal working position for any posture. Its rock-solid stability allows for easy one-handed control and smooth flipping of your project, reducing strain and boosting your stitching productivity.. Multiple Uses Workstand with side camp includes a free, adjustable phonetablet holder. This accessory enables hands-free viewing of tutorials or videos while you stitch. You can easily adjust its angle and position to achieve the optimal view for any task.. Rock-Solid Base Made of heavy-gauge metal, the needlepoint stand stays firmly in place without shaking, offering unwavering support. The rust-proof finish is built to last, requires low maintenance, resists humidity, and protects against scratches for extended use.. Dedicated Customer Support Every cross stitch stand is manufactured following a rigorous production process for any concerns, email us anytime. We are committed to ensuring your issue is fully resolved to your satisfaction..

Versatile Embroidery Hoop Stand - guofa adjustable embroidery stand can be widely used to help you finish various sewing needlepoint projects, like diy embroidery, cross stitch kit, punch needle and needlepoint work. Our stand is versatile to both use as a table-top stand or embroidery lap stand, highly relaxing your hands, arm and shoulder.. Adjustable Embroidery Lap Stand - The embroidery clamps get updated to hold the hoop firmly, appropriate for round, square and other universal embroidery hoops. The hoop's angle can be rotated 360 degrees easily to look at your works back side. The height of embroidery hoop holder is extended, whether making embroidery or cross stitch kits on table, bed or lap is available.. Sturdy Wood Cross Stitch Stand- The embroidery lap stand is made of sturdy beech wood with polished surface. Its a perfect choice for cross stitch and diy embroidery kit. Please NOTE the wood embroidery hoop is not included in package, If you need, please don't forget to order it separately.. Perfect Present - You could send this cross stitch holder stand to your friends or familes who love diy hand work as a present. Without it, you need to hold by hand when making the embroidery kit, which is not good for your health. But now its not a problem at all. It can also be used to display your excellent works, putting everywhere you want, like living room, bedroom, dinning table, etc.. Easy to Use our embroidery lap stand is very easy to put together, as we have instruction in the package and we also uploaded video on online, so you can easily assemble them in a few minutes.

Complete Set for Crafting this set includes 6 bamboo embroidery hoops-three 7.87 hoops and three 9.84 hoops along with 6 triangular display stands measuring 7.09 x 9.45S Ideal for cross-stitch, embroidery, and needle arts, the varying sizes provide flexibility for multiple craft projects or display arrangements. Triangular Embroidery Hoop Stands designed with a low center of gravity, the triangular wooden embroidery hoop easels ensure tip-resistant, sturdy support for your embroidery work They occupy minimal space, making them ideal for your craft desk, workspace, or store displays, providing both functionality and aesthetics. Bamboo Materials made from natural bamboo, the embroidery hoops are lightweight, resistant to warping Paired with solid wood easels, they offer a rustic yet stylish look that blends well with various interior styles like farmhouse, boho, or decor. Adjustable Viewing Angles the embroidery hoop holder allow you to easily adjust the angle of your embroidery hoops to ensure an ideal view from any direction This makes it nice for showcasing your work, whether for photography, live demos, or simply enjoying the fine details under natural light. Versatile Display for Various Creations not just for embroidery, these embroidery hoop frames and stands can display small framed art, photos, mini canvases, motivational quotes, or seasonal decorations Whether you're a crafter, artisan, or vendor, this set enhances your space and makes a stylish display for any occasion.

Simple and Practical Cross-Stitch Frame This tapestry frame measures 17 x 15 in, It is the ideal cross-stitch frame for table-top embroidery, cross-stitch, quilting, two-thread embroidery, and other types of needlework crafts. Tapestry Roll Embroidery Frame Crafted from pure natural solid wood. Completely free of paint and odors. The wood has been carefully sanded, with smooth edges and a pleasant texture that is gentle on fabrics.. Easy to Assemble and Disassemble This wooden frame features a plastic clamp design with strong elasticity to keep the fabric taut. Built for long-term use, it includes pull straps for easy assembly and disassembly.. Includes a practical multi-purpose clip The included two-pronged clip can be adjusted in any direction. It can hold embroidery patterns or be used to secure a magnifying board, lamp, and more.. A Thoughtful Gift for Craft Enthusiasts The perfect Mothers Day or birthday gift It will become an indispensable tool for anyone interested in needlework projects, cross-stitch, embroidery, tapestry, quilting, and other needlework crafts. It will make the crafting process easier and more enjoyable..

High UtilityCompatible with various shapes and sizes of embroidery hoops, including round, square, and oval, perfectly suited to meet your embroidery needs. Excellent DesignMade of high-quality aluminum alloy and equipped with a metal chain clamp for added stability and durability. The base features soft rubber pads to prevent noise and scratches. High FlexibilityAdjustable height up to 51.5 inches, with a 360-degree rotating arm for easy angle and position adjustments, making your embroidery work more flexible. Multi-Functional UseNot only useful for embroidery, but it also serves as a phone and tablet holder, perfect for watching TikTok, videos, reading, or checking recipes while cooking. A great helper in daily life. Hands-Free ConvenienceSecurely holds your embroidery hoop, phone, or tablet, providing stability and freeing your hands. Say goodbye to soreness and enjoy a more comfortable crafting or viewing experience.

Adjustable Design with Two Sizes This embroidery stand comes with two sets of interchangeable wooden poles, 11.8 inches and 15.5 inches, allowing you to adjust the frame to accommodate a variety of embroidery fabric sizes. The customizable frame ensures perfect tension for both small and large projects, making stitching smoother and more enjoyable. It is ideal for cross-stitch, needlepoint, and tapestry work.. Hands-Free Stitching for Maximum Comfort Designed to sit securely on tables, laps, or sofas, this embroidery frame allows both hands to be free for precise stitching. It reduces fatigue during long crafting sessions and gives you complete control over needle placement. The hands-free design ensures comfort and efficiency for all types of embroidery projects.. Non-Slip Clips Provide Rock-Solid Stability Equipped with grooved crossbars and multiple anti-slip clips, this wooden embroidery holder firmly locks your fabric in place without causing any damage. It prevents slipping or shifting during stitching, maintaining even tension and accurate needlework. This adjustable embroidery stand is an ideal tool for embroidery, cross stitch, needlework, sewing, quilting, tapestries, etc.. Premium Wood Construction and Durable Design Made from high-quality, finely sanded wood, this embroidery stand is smooth and splinter-free, offering a safe and durable workspace for delicate stitching. The sturdy construction provides stable support while the natural wood finish adds an elegant touch. It is perfect for personal use or as a thoughtful gift for embroidery enthusiasts.. Easy Tool-Free Assembly and Compact Storage No extra tools are required to assemble this adjustable embroidery seat stand. The package includes all necessary screws and detailed instructions. Follow the step-by-step guide please check the product pictures to set the cross stitch hoop stand effortlessly. When not in use, the stand can be disassembled flat for easy storage. Its lightweight and compact design makes it suitable for both indoor and outdoor use and allows you to place it on tables, beds, chairs, or sofas, making it convenient for crafting anywhere..

Easy Adjustment This embroidery hoop stand includes two interchangeable wooden poles 12.5 inch and 16.5 inch, allowing you to adjust the frame according to your fabric size. A versatile embroidery hoop holder and cross stitch holder suitable for embroidery, cross stitch, and needlepoint stand work. Steady Secure The crossbar on this embroidery stand is designed with grooves and equipped with 8 anti-slip clips that hold fabric firmly without damage. It prevents slipping and keeps fabric stable for precise stitching, making it a reliable cross stitch stand and cross stitch holder stand for steady control. Quick Setup No extra tools required. Just insert the crossbars, tighten the screws, and clip your fabric securely in place. The cross stitch lap stand and embroidery lap stand setup is easy to assemble and disassemble, saving space when stored or carried for travel. Ideal for embroidery stands for hand work. Premium Material Crafted from smooth, polished wood, this cross stitch frame and embroidery holder combination offers sturdy support and a comfortable grip. The needlepoint frame and cross stitch stand hands free design protect your hands and fabric for long-term use. Versatile Use Perfect as an embroidery scroll frame, cross stitch scroll frame, or embroidery frame stand for various handcrafts. Works well as cross stitch frame stand, embroidery frames for hand work, embroidery hoop lap stand, embroidery holder stand, cross stitch frames also works great on tables, beds, or sofas, perfect for any stitching space.

Sturdy Beech Wood Build Our wooden embroidery hoop stand is crafted from durable beech wood with a stable, widened base and strong screws to prevent sagging. Ideal for long cross-stitch or needlepoint projects, this adjustable embroidery hoop holder provides reliable stability and comfort.. Versatile Hoop Clamp The rotatable clamp comes with 6-inch and 7-inch hoops, offering a secure hold that keeps your embroidery project taut and stable, minimizing fabric slippage and enhancing your overall stitching experience.. Adjustable Height Angle The embroidery scroll frame stand adjusts from 11.8 to 15.7 with a 360 rotating hoop for ergonomic comfort. Use it as a lap embroidery hoop stand on couches, beds, or tables to minimize strain and enhance your stitching experience.. Smooth, Comfortable Finish Featuring a polished, splinter-free surface, the frame holder stand ensures a comfortable, snag-free stitching experience. The wooden hoop stand is safe for extended use, making it ideal for embroidery, cross-stitch, or needlepoint without rough wood concerns.. Easy Setup Great Support Assembling the embroidery lap stand is a breeze with clear instructions and videos. Perfect for beginners and experts, its compact and portable for storage. Were committed to providing top-notch support for your wooden embroidery hoop stand, ensuring a worry-free experience..

Size - 190-4 Model The stand will fully extend out to a height up to 53cm 21. The base is 39cm 15 x 21cm 8.3.. Embroidery Hoops No2 Small 6.5 inc X 5.7 inc 14.5 cm x 16.5 cm. Embroidery Hoops No3 Medium 8.66 inc X 7.68 inc 19.5 cm x 22 cm. The Nurge adjustable embroidery seat stand 190-4 is made from hard beechwood, fine sanded and polished for a super smooth natural wood finish. They are the crafters choice for quality.. It can be used as a table-top stand but is ideally designed to be a seat stand by sitting on the lower base tucked under your legs allowing comfort and creativity at the same time..

Adjustable Design This wood embroidery hoop stand is equipped with 2 sets of wooden poles 12.5 inch and 16.1 inch, and the available spare poles allow you to choose the appropriate size of the embroidery fabric.. Enhanced Stability The crossbar of the adjustable embroidery stand is designed with grooves, including 8 anti-slip clips, which can firmly fix your fabric without damage, prevent it from moving or slipping during the embroidery process, and better control the needles with both hands, providing you with good stability on any flat surface.. Easy to Assemble No additional tools are required. Just insert the crossbar into the baffle, screw in the screws no need to tighten, then place the embroidery cloth on the two crossbars and fix it by inserting the accessories into the grooves of the crossbars, turn the crossbar to tighten the embroidery cloth, and finally tighten the screws. It can be disassembled when not in use, saving your storage space.. Reliable Mterials This cross stitch hoop stand frame is made of composite boards and wood, it has been finely ground and polished, with no burrs on the surface, don't worry about hurting your hands or the work. It is sturdy and provides you with stable support.. Widely Used The hand-free wooden cross stitch frame is suitable for various manual projects such as embroidery, cross stitch, needlework, sewing, quilting, tapestry, etc. It can be used on tables, beds, chairs, sofas, etc., and is an ideal embroidery product..

Adjustable Wooden Embroidery Frame Set Our adjustable embroidery table stand is expertly crafted from natural pine wood, featuring a warm unfinished appearance that complements any crafting space. The adjustable design includes two sets of wooden rods measuring approximately 30 cm and 40 cm in length 11.8 and 15.7 inches, allowing you to accommodate various fabric sizes for different embroidery projects. Enhanced Stability With Anti-Slip Clips The wood embroidery hoop holder is thoughtfully designed with precision-cut grooves that securely hold your fabric in place using included anti-slip clips. These clips firmly grip the material without causing damage, preventing any movement or slipping during intricate stitching work. This stable setup allows you to use both hands freely for better needle control and more precise embroidery results on any flat surface. Tool-Free Assembly For Quick Setup No additional tools are required for assemblysimply insert the crossbars into the end frames, position your fabric, and secure it using the clips in the grooves. The hands-free cross stitch scroll frame needlepoint stand can be easily disassembled when not in use, collapsing flat for convenient storage in drawers or on shelves, making it ideal for crafters with limited workspace. Smooth Splinter-Free Pine Construction Each hands free cross stitch hoop stand has been finely sanded and polished to create a smooth, burr-free surface that protects both your hands and delicate fabrics during use. The natural pine wood offers reliable durability while remaining lightweight enough for easy portability between crafting locations, from your favorite armchair to outdoor hobby sessions. Versatile For Multiple Needlecraft Projects This cross stitch hoop stand is perfect for a wide range of textile arts including cross stitch, needlepoint, crewel embroidery, tapestry work, quilting, and various sewing projects. Suitable for use on tables, desks, beds, chairs, or sofas, it provides comfortable hands-free support whether you're stitching at home, in a studio, or taking your crafting on the go.

Sit-on or fanny frame allows you to work comfortably while relaxing in your favorite chair. This uniquely designed frame is portable enough to use while traveling. Includes a 9 x 18 split rail scroll frame. This frame will hold your fabric taut and wrinkle free while allowing you the use of both hands in order for you to complete your work. Do not over tighten the upright when attaching it to the base. The scroll frame included in the 2941 ASIN B000OCUAJA is 9 between the dowels and the dowel are 18 long. Because the spreaders that hold the dowels are thick the working area between the spreaders is 16 wide..

Package Size --The package include a set of black embroidery table stand kit, plastic support spring microphone clamp about 79.5x85x49mm3.1x3.3x1.9 inch, hole 8mmplastic iron clamp about 89.9135x6975x35mm, hole 12mmiron stand boom arm about unfold 495mm19.5 inch long, fold 285x112x1029mm11.2x4.4x0.41.1 inch.. Quality Material --These embroidery table stand kit is made of plastic material, strong and durable, not easy to break or deformation, light weight, easy to carry and store, you can use for a long time.. Fexible Design --The best feature of this hoop stand is that it is flexible enough for you to adjust the height and angle to achieve the best posture, which is both convenient and easy to use.. Enjoy DIY--You can desgin your unique DIY crafts with your faimily or friends to spend holiday time. And it will be a prefect gift for your family or friends on christmas, birthday or other festival.. Wide Application --Cross stitch holders can be widely used on desks, workbenches, tables or nightstands. The clips all hold the embroidery hoop firmly to avoid slipping..

Cross Stitch Partner this cross stitch scroll frame set, which features spreaders at 6 and 8 inches, and scrolling rods of 8, 14, and 20 inches Enhance your craft experience with 8 knob fasteners and 6 plastic clips, ensuring convenience. Quality Material quilting frame made from beech wood Its smooth surface offers comfortable grips, ensuring no easy to harm your canvas or skin The wooden color not only offers reliability but also adds natural beauty to your creative process. Enhancing Stitching this cross stitch frame features plastic clips designed to grip fabric securely and not easily damage the embroidery fabric, ideal for multi patterns and beginners, enhancing the accuracy and comfort of your stitching experience. Creative Usage this versatile cross stitch stand accommodates bead work, ribbon embroidery, and advanced cross stitch skill through the reach of standard hoops Its flexible and versatile use brings unlimited creative potential to every project. Ideal Gift if you are searching for the ideal gift for a craft enthusiast, this cross stitch holder is your ideal choice It's ideal for those who cherish needlework, cross stitch, hand embroidery, tapestry, yarn work, batik, or fabric painting.

Hands-Free Crafting Comfort A desktop design and ergonomic 9.8 in 25 cm height free your hands for detailed work, acting as a superb cross stitch stand its secure clamping keeps fabric taut and flat, preventing distortion enjoy comfortable posture for pristine results. Versatile Project Accommodator A generous 13.8 in 35 cm width easily handles large projects its innovative dual frame design allows flexible positioning, adapting to various crafts such as cross-stitch, needlepoint, and embroidery embrace creative freedom. Hassle-Free Assembly Designed with a straightforward assembly structure, this frame ensures simple and quick installation easily set it up in minutes, getting started on your beloved embroidery projects without frustrating delays or complex instructions. Robust Reliable Construction Crafted from plastic material, this plastic embroidery frame is both lightweight and long-lasting its robust four-corner support system ensures even stress distribution, providing superior stability for all crafting endeavors. Portable Crafting Companion The exceptionally lightweight design makes this embroidery frame incredibly easy to carry whether crafting at home, visiting friends, or attending a workshop, effortlessly transport your projects and enjoy creativity wherever inspiration strikes.

? ? ? This TONOS document holder for desk features 7 adjustable positions for height and angle, helping to reduce neck, shoulder, and eye strain. Whether youre typing, reading, or transcribing, it encourages a proper postureideal for students, professionals, and daily computer users. Also works great as a paper stand for desk when typing.. -? Use it as a typing stand, paper holder stand for desk, cookbook stand, or book display. This versatile desktop stand helps organize your workspace by holding papers, recipes, books, or music sheets uprightkeeping your desk tidy and improving productivity.. Made of high-quality stainless steel and ABS, this document holder for typing features a metal backplate with a wide base for maximum stability. It supports a variety of documents, books, catalogs, and tablets without tipping or bending.. ?? ? Measuring 14 x 9 35.6cm x 23cm, this foldable stand folds flat in secondsperfect for compact storage or travel. A great portable desktop stand option for use at home, in the office, classroom, or library.. , Whether you're a student, teacher, secretary, or work-from-home professional, this hands-free document holder for desk improves focus and efficiency. Also makes a thoughtful gift for anyone who reads, types, or studies regularly.. ? Nuestro soporte de documentos TONOS te ayuda a mantener tus papeles organizados y tu escritorio ordenado, facilitando el estudio y el trabajo diario..

EASY TO ASSEMBLE AND USE - With its distinctive swivel system, the stand enables you to effortlessly lift and rotate the frame a full 360 degrees whenever needed. It assembles quickly, ready for use within seconds, and conveniently folds away for compact storage. Offering practicality, stability, and adjustable height, this stand empowers you to stitch smarter with Daylight Please note that the frame and wooden parts are not included.. PERFECT GIFT - The adjustable embroidery stand is an ideal gift for friends or family members who enjoy DIY handwork. It eliminates the need to hold the embroidery kit by hand, promoting better health and comfort during the stitching process. Additionally, this stand can be utilized as a display for showcasing your beautiful creations. It can be placed in various locations such as the living room, bedroom, or dining table, allowing you to proudly exhibit your excellent work.. EFFECTIVE EMBROIDERY TOOL - The adjustable embroidery stand is a versatile tool that can assist in various sewing craft projects. Its adaptability makes it suitable for a range of activities such as DIY embroidery, cross-stitch kits, punch needle projects, and needlepoint work. By enabling you to lift and rotate the frame or hoop, the Daylight StitchSmart Stand offers flexibility and convenience, making it easier to achieve accurate stitching and enhancing your overall needlework experience.. STRONG JAW AND ADJUSTABLE HEIGHT - The Daylight StitchSmart Stand is indeed a useful tool for needlework enthusiasts. Its strong jaw provides a secure grip, ensuring that your embroidery frame or hoop remains in position while you work. The stand's swivel system is a standout feature, allowing you to easily lift and rotate the frame or hoop a full 360 degrees at any time.. QUALITY MATTERS - At our premium lighting brand, we place great importance on innovation, artistic expression, and the creation of a welcoming atmosphere. We expertly combine light quality, ergonomics, and design to meticulously craft the ideal lamps for your specific tasks. Our products go beyond mere aesthetics, as they are highly functional and truly make a difference in delivering the optimal lighting conditions for you to see every detail and color with utmost precision, exactly when it matters most. Designed and engineered in the UK..

Nurge adjustable wooden embroidery seat stands are made from hard beechwood, fine sanded and polished for a super smooth natural wood finish. These products are the number 1 professional crafters choice for quality.. The Adjustable Seat Embroidery Stand The B seat embroidery stand allows easy embroidering using both hands. It can be used as a table-top stand but is ideally designed to be a seat stand by sitting on the lower base tucked under your legs allowing comfort and creativity at the same time. The stand has 3 adjustable joints plus the final hoop holding knuckle join that will pivot to any angle so that you can find the optimum height, distance and angle depending on your hoop size for maximum comfort whilst creating your next master piece.. The stand will hold any size hoop diameter Typically 100mm to 310mm 4 to 12 and hoops up to and including 16mm deep it will fully extend out to 50cm 20.. The stand is also good for holding tapestry frames up to 75cm 30. Please note This embroidery stand does not include the embroidery hoop..

360 Full Rotation Design this embroidery hoop holder features 360 adjustable rotation, allowing you to effortlessly change the angle while working on your cross stitch, embroidery projects, or other crafting activities Adjust it for maximum comfort and efficiency, freeing your hands for more precise work The set also includes 3 adjustable triangular trays to organize your embroidery needles, threads, and other needlework tools, keeping your supplies neat and within easy reach. Durable Wood Construction crafted from wood, this embroidery hoop stand is designed for long-lasting stability Its sturdy structure ensures no wobbling or instability during your embroidery, cross-stitch, or sewing projects, delivering reliable support for all your needlework. Versatile Compatibility The adjustable embroidery hoop stand fits multiple sizes of embroidery hoops hoops not included, perfect for embroidery projects of all sizes from delicate detailed work to large stitching pieces. Comes with a detailed instruction manual for easy assembly and use, meeting all your DIY crafting needs. Comfortable Work Experience this ergonomic embroidery hoop holder is ideal for desk or tabletop use Its height and angle can be adjusted to reduce strain, making it comfortable for long stitching, quilting, or needlework sessions Adjust it to your preferred height and tighten the button for stability. Perfect DIY Gift Idea good for embroidery enthusiasts, beginners, and crafters, this wood embroidery hoop holder makes a thoughtful gift for holidays like Mother's Day It's a great way to inspire creativity and provide comfort for anyone passionate about crafting.

Adjustable Design This adjustable embroidery table stand comes with 2 wooden rods 11.8 inches and 15.75 inches, allowing you to choose the right size for your embroidery fabric. The cross stitch frame can be used on a tabletop or your lap, making it ideal for cross-stitch, needlepoint embroidery, and tapestry projects.. Sturdy Natural Wood Material Crafted from premium solid wood, this cross stitch hoop stand features a polished, splinter-free surface. The durable material provides stable support, preventing your fabric from slipping or being damaged during stitching.. Lightweight and Portable With a compact size of 11.8 x 11.8 inches, this embroidery frame is lightweight and easy to carry. The hand polished natural wood embroidery stand is perfect for stitching at home, in the studio, or outdoors.. Enhanced Stability The tabletop stand set includes 2 different size plastic clips6pcs 0.79inchand 6 pcs 1inch, 2 different sizes of clips can securely hold your fabric without causing damage. Easily roll up larger embroidery fabrics to fit the cross stitch embroidery frame holder without compromising your stitching comfort.. Easy Assembly No extra tools are required to assemble this adjustable embroidery seat stand. The package includes all necessary screws and detailed instructions. Follow the step-by-step guide please check the product pictures to set the cross stitch hoop stand effortlessly..

1. 20 Extra Long Ergonomic Comfort Ditch the hunching. Unlike standard 6-inch short mounts, our 20-inch 50cm reinforced gooseneck arm brings your project right to your eye level. Sit back in your favorite chair, relax your shoulders, and maintain a neutral spine. Its an absolute game-changer for reducing neck strain during long needlework sessions.. 2. Full-Angle Rotation Flexibility Engineered with a precision -degree rotating head, this holder allows you to flip your hoop instantly to tie off threads on the back or adjust the angle to catch the perfect natural light. The flexible gooseneck stays exactly where you bend it, providing a smooth, uninterrupted workflow at any position.. 3. Heavy-Duty Metal Stability Zero-Shake Crafted from premium mid-sized industrial metal components, this stand is built for unwavering stability. The reinforced alloy steel core and robust metal hardware ensure your hoop remains rock-solid and vibration-free while you stitch. No more annoying shaking or droopingjust steady, professional-grade support for every needlework project.. 4. Universal Grip Surface Protection The wide-mouth smart clamp features a secure, non-slip grip that holds wooden, plastic, round. Both the heavy-duty table mount and the hoop clip are lined with thickened silicone padding to protect your delicate fabrics and expensive furniture from any scratches or marks.. 5. Portable Grips Everything Creator Hub This isn't just an embroidery stand it's a versatile multi-tool. Its portable, tool-free design makes it easy to move between rooms or take to craft retreats. The industrial-strength metal clamp is also perfect for holding Photography Reflectors, Microphones, Tablets, or Ring Lights, serving as your reliable third hand for all DIY filming and crafting..

Adjustable Embroidery Stand you will get a wooden desktop embroidery hoop stand, with a length of 22.8 inch and a height of 10.6 inch The angle can be adjusted by yourself Get your hands free of cramping and soreness, enjoying the DIY embroidery process, making it easier for you to embroider. Smooth and Sturdy Material this cross stitch stand is made of beech wood, which is strong and steady, long service life, smooth and shiny, with an exquisite polishing process, you don't have to worry burrs or pointed parts will scratch your hands or embroidery, you can use this embroidery hoop holder with confidence. Adjustable and Flexible this embroidery frame does not take up much space, can be moved at will, can be placed on the table or on the ground, the length of the embroidery frame can be slid and adjusted as needed, and the cross stitch hoop frame can be rotated accordingly. Easy to Install and Disassemble it comes with an English manual, this needlework frame can be installed in a short time without the help of other tools and can be disassembled when not in use, which saves your storage It is also convenient to take to schools, craft rooms and other places. Wide Range of Use this quilting frame and stand is an ideal embroidery supply, ideal for needlework, cross stitch, sewing, quilting, beading, tapestries and other embroidery crafts or works of art It is not only suitable for home, but also suitable for embroidery workshops, training schools, classrooms and other occasions Besides, it can also be applied as a distinctive gift for friends and families.

Adjustable Embroidery Stand ,appropriate for round, square and other universal embroidery hoops.Suitable For phone holder.. embroidery stand lift from 4in to 22INand rotate the frame 360 degree at anytime. you can adjust the tilt in Every direction.. Save Your Hands With our embroidery frame stand, you don't have to hold the hoop while doing embroidery, get your hands free of cramping and soreness. Embroidery Hoop Holder widely used on a desk, workbench, table, or bedside table, with built-in rubber pad can easily clip to any desktop up to 1.96 inches5 centimeters thickness. Embroidery hoop holder stand with Metal hinge clip soft rubber pad for protection embroidery frame, can easily clip to any embroidery hoops to 1.5 inches.

Constructed of durable hardwood.. Holds hoops, stretcher bards, and scroll frames of all sizes.. Adjusts for height, angle, and right or left hand use..

Embroider Stand with Scroll FrameThis updated design is a combination of embroidery holder stand and cross stitch scroll frame. This qulit frame will provide great help for your needlepoint sewing craft and free your hands, relieving wrist and shoulder pain.. Rotatable Cross Stitch Stand This embroidery stand with scroll frame is able to rotate 220 degree. When you are making a cross stitch kit, you could rotate it vertically at will without loosing any adjustment. It will greatly save time and make you handwork life easier. Easy to Assemble All the parts are included in the box package. We provide detailed English instuction with diagrams to help you how to install the cross stitch lap stand. Just follow our steps and you will find it's easy to complete the assembly. Please be careful to put every part in right position. If any needs, we're very willing to help you.. Multipurpose Embroidery Craft Tool The frame stand is a game changer for art craft lovers, like DIY embroidery, cross stitch, needlepoint, needlework and other sewing projects. Whether you want to use it as a lap stand, table stand or floor stand is available.. Adjustable Embroidery Frame Stand The cross stitch stand is also an adjustable size design. The two poles can be moved towards the middle, whose distance is between 1.718inch. The scroll frame we provided is 1018inch, suitable for big embroidery projects.. Risk Free Purchace If any quality problems for embroidery stand fulfilled by guofa, please don't hesitate to contact us. We are committed to provide better and better products and service for each customer..

The Universal Craft Stand is perfect for many types of craft projects. Constructed from durable American hardwood, the 37.5 stand holds hoops, stretcher bars and scroll frames of all types and sizes. The stand easily adjusts for height, angle and right or left hand use. The Universal Craft Stand allows you to work comfortably with both hands for better stitch control. Made in the USA.

UPGRADED EMBROIDERY FRAME STAND 2 HOOPS The set comes with 1 wood lap frame, 1 step-by-step installation instruction and 2 high-quality embroidery hoops 6 and 8 as a sweet addition. An ideal choice for embroidery enthusiasts and all skill levels.. SOLID BEECH WOOD STAND The rotatable embroidery lap stand is made of selective beech wood which endows the hoop holder with a natural wood grain texture and soft luster. The smoothly polished finish also makes it comfy to the touch and resistant to moisture. Sturdy and stable, it can serve you in tons of cross stitch and embroidery projects.. HEIGHT ADJUSTABLE CLAMP ROTATABLE The height of the wooden stand can range from 13.9 to 19.4. The 360 degree hoop spin knob and 220 up and down movable joint enable you to get the fittest angle and distance to do your needlework. The base has been widened as well for greater stability. Please tighten the screw timely after adjustments to keep a good grip.. EASY TO ASSEMBLE AND CHANGE HOOPS The compact wood embroidery stand can be installed, detached and stored easily. You can insert embroidery hoops of different sizes and shapes round or square freely into the hoop clamp only if its diameter is less than 15.7 and thickness less than 0.4. Happy stitching with the handy stand. HASSLE-FREE AFTER SALES SERVICE We pride ourselves in bringing you high quality goods and enjoyable shopping experience. If you encounter any question about our cross stitch stand, please feel free to contact us. Our team is at your service at anytime..

Upgraded for Durability Versatility - Upgraded to an all-stainless steel build, this cross stitch stand delivers superior strength, enhanced rust resistance, and longer-lasting durability than powder-coated steel stands that may chip or wear over time. With a maximum height of 40 and an extended reach of 17.7, it easily accommodates larger and longer projects while fitting a wider range of armrests and setupsno need for additional extension rods, saving you money and hassle.. Perfect Compatibility - Designed with a reinforced and thickened high-precision side clamp, this embroidery stand securely holds round hoops, Q-Snap frames, and scroll rods up to 20 wide. The upgraded clamp provides a stronger grip and resists deformation, keeping even larger and heavier frames stable without wobbling or slipping to maintain consistent tension while stitching. Soft 3M foam pads on the contact surfaces help protect your frames from scratches and marks. Enjoy a true hands-free stitching experience, allowing you to focus on every detail of your craft.. Fully Adjustable for Maximum Comfort - Featuring 360 rotation on both the clamp head and L-shaped pole, plus adjustable height and extension, this embroidery floor stand adapts to different seating positions and project sizes. It provides easy access to the back of your work for smoother thread changes and backstitching, lets you easily swing the frame aside when you need a break, and helps you achieve the ideal stitching angle to reduce neck and shoulder strain, ensuring lasting comfort even during long hours of stitching.. Easy Safe Assembly - Comes with a hex key and a clear instruction manual for quick setup in minutes. A step-by-step installation video is also available on the product detail page for added convenience. All adjustments, including height, rotation, and clamp tension, are completely tool-free, making operation simple and intuitive. Smooth, rounded edges help reduce the risk of scratches or cuts. Whether you're a beginner, senior, or someone with limited mobility, you can easily set up and adjust the stand with confidence.. Helpful Tips for Better Stability - Its wide base provides excellent stability, keeping frames steady and wobble-free during use. For larger or heavier frames, the needlework stand can be further stabilized by placing the base under a chair, sofa, or other furniture for enhanced support..

Premium Embroidery Hoop Stand Crafted from high-quality beech wood, this embroidery stand is lightweight, splinter-free, and features a smooth, polished surface for a delicate touch. Its durable and flexible design ensures it can handle countless cross stitch and embroidery projects with ease. Please note that embroidery hoops are not included. Adjustable Embroidery Hoop Holder The adjustable embroidery hoop stand features a groove design for a secure grip on your embroidery hoop. Rotate it to your preferred angle and adjust the height 13.3 to 19.6 for comfortable use on tables, beds, or laps. Versatile Embroidery Lap Stand This embroidery hoop holder stand fits most hoops, regardless of size, material, or brand. Use it for DIY embroidery, cross stitch kits, or needlepoint. It doubles as a tabletop stand or seat stand, reducing strain on your hands, arms, and shoulders.. Easy-to-Assemble Cross Stitch Stand Everything you need is included, along with clear English instructions and diagrams. This hands-free embroidery frame stand eliminates the need to hold your hoop, preventing cramps and soreness. Perfect for needlework enthusiasts. Ideal Gift for Craft Lovers Surprise your wife or friends who love embroidery or needlepoint with this thoughtful gift. The embroidery lap stand makes stitching easier, reduces wrist pain, and enhances your crafting experience..

Portable Storage and Sustainable Qualitypremium natural Wood Embroidery Hoop Stand,reinforced structure ensures reliable load-bearing capacity, while non-slip clamps and grooved crossbars provide extra stability. The smooth, finely finished surface delivers a comfortable grip, making it easy to handle without fatigue. Tool-Free AssemblyDesigned for effortless setup. It comes with a clear illustrated guide and firmly secures embroidery fabric to prevent shifting or slackening. The stand ensures even fabric tension, allowing you to work efficiently on detailed projects like Cross Stitch Scroll Frame setups. Dual-Rod Anti-Wobble DesignFeaturing 2 rod sizes 13.9 and 17.3, this Cross Stitch Stand uses adjustable plastic buckles for easy height customization. while ergonomic angle and height adjustments help reduce strain. Perfect for both sitting and standing use, it can works comfortably on your lap, table, and sofa. Premium Bonus Embroidery Assistant Setpin cushion with an elastic wrist strap keeps needles organized, while the handcrafted adjustable thimble prevents fingertip soreness. It make every Needlepoint Stand session more enjoyable, turning complex sewing into a seamless, pleasant experience. Versatile Crafting Gift-ReadyCompatible with fabrics of various thicknesses, this multipurpose frame supports a wide range of craftsembroidery,sewing,quilting,cross-stitch, and silk painting. elegant wooden finish make it a perfect gift for birthdays, Mothers Dayblending timeless beauty with heartfelt craftsmanship.

Adjustable Size Versatility Includes two premium wood pole sets 11.8 15.7 with spare poles. Customize to fit any embroidery fabric size while maintaining perfect tension control. Rock-Solid Stabilization System Grooved crossbar with 12 non-slip clips firmly locks fabrics without damage. Prevents shifting during stitching and enables confident two-handed needlework on any surface. Tool-Free Assembly Space-Saving Sets up in seconds without tools Insert crossbars, position fabric, rotate to tighten. Disassembles completely for compact storage when not in use. Safe Durable Construction Composite wood frame sanded smooth with zero burrs. Protects hands and delicate fabrics while providing sturdy support for long crafting sessions. Multi-Craft Hands-Free Solution Ideal for embroidery, cross-stitch, quilting and needlework. Portable design works on tables, beds, chairs or sofas for creative freedom.

Lightweight and PortableWith a compact size of 11.8 x 11.8 inches, this embroidery frame is lightweight and easy to carry. The hand polished natural wood embroidery stand is perfect for stitching at home, in the studio, or outdoors. Tool-Free Setup in SecondsNo tools, no fuss Just insert the crossbar into the frame, screw in the screws no need to tighten, snap parts together, clip your fabric, crank the crossbar to tighten, and stitch. Disassembles flat for compact storage. Reliable MterialsThis cross stitch hoop stand frame is made of sturdy natural wood, it has been finely ground and polished, with no burrs on the surface, don't worry about hurting your hands or the work. It is sturdy and provides you with stable support. Wood MaterialCrafted from premium solid wood, this cross stitch hoop stand features a polished, splinter-free surface. The durable material provides stable support, preven ting your fabric from slipping or being damaged during stitching.. Enhanced Stability The tabletop stand set includes 12 plastic clip. Easily roll up larger embroidery fabrics to fit the cross stitch embroidery frame holder without compromising your stitching comfort..

Adjustable Design with Dual-Size Rods Our Airo embroidery table stand comes with two sets of wooden poles 11.8 and 15.3, allowing you to choose the appropriate size for your embroidery fabric and achieve a custom, secure fit.. Enhanced Stability with Anti-Slip Clips The groove-designed crossbar includes 8 anti-slip clips to firmly fix your fabric without damage, preventing movement and slippage for better needle control with both hands free, ensuring excellent stability on any flat surface.. Tool-Free, Easy Assembly Storage No additional tools needed. Simply insert the crossbar, place your fabric, secure it with the clips in the grooves, and tighten. It disassembles easily when not in use, saving valuable storage space.. Reliable Smooth Composite Wood Material Crafted from sturdy composite boards and finely polished wood, this cross stitch hoop stand frame has a smooth, burr-free surface that won't hurt your hands or damage your work, providing durable and stable support.. Versatile for Hands-Free Crafting This hands-free wooden stand is ideal for embroidery, cross stitch, needlework, sewing, and more. Use it on tables, beds, chairs, or sofas for a wide range of manual projects..

UPGRADED EMBROIDERY FRAME STAND WITH 2 HOOPS This Airo set includes 1 beech wood lap frame stand and 2 high-quality embroidery hoops 6 and 8 for cross stitch, embroidery, and sewing needlework, offering tool-free installationan ideal choice for enthusiasts of all skill levels.. SOLID BEECH WOOD CONSTRUCTION Made of selective beech wood, this rotatable embroidery hoop stand boasts a natural wood grain texture, soft luster, and a smooth, polished finish thats comfy to touch and moisture-resistant, ensuring sturdy, stable support for all your projects.. HEIGHT ADJUSTABLE 360 ROTATABLE CLAMP This embroidery table stand adjusts from 16.93 to 19.69 in height. Its 360 spin knob and 220 movable joint allow you to find the perfect angle and distance for needlework, while the widened base provides greater stability.. EASY TOOL-FREE ASSEMBLE HOOP CHANGE Our compact wood embroidery stand installs, detaches, and stores easily. The hoop clamp accepts various embroidery hoops round or square under 15.7 in diameter and 0.4 thick, making hoop changes quick and hassle-free.. IDEAL GIFT FOR CRAFT LOVERS A thoughtful gift for anyone who loves embroidery or needlepoint. This lap stand makes stitching easier, helps reduce wrist pain, and enhances the overall crafting experience for your wife, friends, or family..

UPGRADED EMBROIDERY FRAME STAND WITH 2 HOOPS This Airo set includes 1 beech wood lap frame stand and 2 high-quality embroidery hoops 6 and 8 for cross stitch, embroidery, and sewing needlework, offering tool-free installationan ideal choice for enthusiasts of all skill levels.. SOLID BEECH WOOD CONSTRUCTION Made of selective beech wood, this rotatable embroidery hoop stand boasts a natural wood grain texture, soft luster, and a smooth, polished finish thats comfy to touch and moisture-resistant, ensuring sturdy, stable support for all your projects.. HEIGHT ADJUSTABLE 360 ROTATABLE CLAMP This embroidery table stand adjusts from16.69 to 19.69 in height. Its 360 spin knob and 220 movable joint allow you to find the perfect angle and distance for needlework, while the widened base provides greater stability.. EASY TOOL-FREE ASSEMBLE HOOP CHANGE Our compact wood embroidery stand installs, detaches, and stores easily. The hoop clamp accepts various embroidery hoops round or square under 15.7 in diameter and 0.4 thick, making hoop changes quick and hassle-free.. IDEAL GIFT FOR CRAFT LOVERS A thoughtful gift for anyone who loves embroidery or needlepoint. This lap stand makes stitching easier, helps reduce wrist pain, and enhances the overall crafting experience for your wife, friends, or family..

Premium Beech Wood Construction Crafted from selective beech wood, this embroidery stand is lightweight with a smooth, burr-free surface. Its durable, flexible design offers a delicate touch and excellent polish, ensuring it serves you reliably through tons of cross stitch and embroidery projects.. Fully Adjustable Rotatable Stand Easily move the two poles towards the middle to securely hold universal hoops up to 11 inches. The groove design clamps your embroidery hoop firmly. Rotate it 360 degrees to a comfortable working angle or convert it into two small holders for simultaneous crafts.. Versatile, One-Size-Fits-Most Design Accommodates a variety of round, square, and gnocchi hoops under 11 inches, regardless of brand or material. Use it as a tabletop or lap stand to relax your hands, arms, and shoulders during sewing, DIY embroidery, cross stitch kits, and punch needlework.. Tool-Free, Easy Installation All parts are included. Follow our detailed illustrated instructions for quick, tool-free assembly. Free your hands from holding the hoop to prevent cramps and soreness, enabling happy stitching with this handy stand.. Stable for Crafting Display Featuring a unique, stable crescent-shaped base, this stand slides in length and rotates 360 degrees horizontally and 180 degrees longitudinally. Perfect for enjoying the DIY embroidery process and displaying your finished craftwork as beautiful home decor..

Multipurpose Cross Stitch Holder The size of this scroll tapestry frame is 18.111.2 inch, working area size is about 16.59 inch, nice cross stitch frame for large embroidery, counted cross stitch, quilt, crewel and other types of needlework sewing art crafts.. Tapestry Scroll Embroidery Frame Made of natural organic beech wood. Well polished wood is smooth without any roughness and harmless to your hands and fabric.. Easy to Assemble and Disassemble The plastic clip design on this wood frame is easy to use. Flexible plastic clips. The clips attached to the fabric and the bar all the way across keep the fabric very tight.. Easy Craft Helper It's easy to fix canvas in the beginning of work with the help of plastic holders and to remove it after finishing. You can easily roll your work if it is necessary.. Perfect Mother's Day Present Cross stitch quilting frame will be the perfect present for anyone who is interested in needlepoint project, cross stitching, needlework, tapestry, quilting and other embroidery art craft works. Choose it It will make the crafts easier and will bring more enjoyment..

COMPLETE KIT FOR ENHANCED STITCHING This premium set includes 1 x sturdy needlepoint stand, 1 x attachable LED lighted magnifying glass, and 1 x extra expansion clip. Ready to elevate your embroidery and cross stitch projects right out of the box. The lighted magnifier is a game-changer for detailed work and reducing eye strain.. SUPERIOR STABILITY WITH EXPANDED BASE Designed for wobble-free stitching, our embroidery stand features an extra-long 35cm approx. 14 weighted base. This provides a solid foundation, making this floor stand remarkably stable on various surfaces. No more annoying shakes or tips while you focus on your needlepoint or cross stitch masterpiece.. FULLY ADJUSTABLE FOR COMFORT CONTROL Achieve the perfect working position. This versatile stand offers 360-degree rotation to easily flip your work for finishing threads, plus height and angle adjustments to match your posture and chair. Its an ideal embroidery floor stand for hours of comfortable crafting, whether youre a beginner or an expert.. DURABLE MULTI-FUNCTIONAL DESIGN Crafted from high-quality stainless steel and metal, this cross stitch stand is built for lasting use. The sleek frame is both strong and aesthetically pleasing. The bonus expansion clip securely holds your pattern chart or instructions, keeping them visible and within easy reach during your stitch session.. VERSATILE COMPATIBILITY FOR YOUR PROJECTS A universal holder for various frames. This embroidery holder stand accommodates Q-Snap frames, scroll rods up to 20 inches wide, and most common embroidery hoops. Its a flexible needlepoint and cross stitch accessory that adapts to your current and future projects, offering great utility and value..

Package Includes This set includes an embroidery clamp, a floor base, an arm stand, a desktop clamp, and a phone holder. You can mix and match the components to fit your needs. When the arm stand is connected to the base, it functions as a floor stand when attached to the desktop clamp, it becomes a desktop stand. 3-in-1 DesignThis stand accommodates embroidery, smartphones, and tablets, allowing users to switch between uses with ease. Whether for embroidery, watching videos, or making video calls, the stand provides ideal support.. Floor and Desktop VersatilityThe stand easily converts between floor and desktop modes. With a simple adjustment, users can use it as a floor stand for larger spaces or switch to a desktop stand for detailed work on a table. Adjustable Height and AngleThe stand features adjustable height and tilt angles, enabling users to customize it to their preferences and seating position. Whether sitting or standing, users can find the perfect viewing angle for comfort. Stable and Sturdy Construction The stand has a solid base design made from high-quality materials, ensuring it remains stable during use. Whether embroidering, watching videos, or making calls, it keeps devices secure and enhances the user experience. Portable and Easy to AssembleThe stand is lightweight and easy to disassemble, making it convenient for use at home, outdoors, or while traveling. The assembly process is straightforward and requires no additional tools, allowing users to set it up and pack it away quickly for on-the-go use.

Comprehensive Embroidery Frame Set this set includes an array of cross stitch frame components 11.8 and 15.7 inch extenders, along with 15.7, 18.8, and 22 inch stretcher bars, secured with convenient square wing nuts and plastic clips Suitable for diverse projects, it's a must have cross stitch holder for many enthusiasts. Quality Material crafted from polished beech wood, this embroidery frame offers a smooth, finely polished surface that feels comfortable in your hands and ensures no harm to your canvas or your skin The wood color adds an elegant and natural feel to your crafting experience. Secure and Reliable Stitching say goodbye to tapes, pins, and sewing threads The cross frame features circular plastic clips that ensure a firm grip without damaging your needlepoint or embroidery fabric, enhancing your stitching precision and comfort. Multi Functional Use beyond traditional embroidery, this cross stitch holder accommodates bead work, ribbon embroidery, and advanced cross stitch techniques not possible with standard hoops Its adaptability broadens the creative potential for every project. Ideal Gift for Craft Enthusiasts this cross stitch holder is the ideal gift for someone passionate about needlework, cross stitch, handmade embroidery, tapestry embroidery, yarn embroidery, batik painting, or fabric painting, bringing joy to creative hearts.

Heavy Duty Metal Construction for Superior Stability - Our DOLEMODUO Needlepoint Stand is crafted with high-quality heavy-duty metal frame, which is more sturdy and durable than wooden or plastic alternatives on the market. This Workstand with Side Clamp can firmly hold your cross stitch, embroidery and needlework projects without wobbling, ensuring long-term use even for heavy or large-sized craft pieces, solving the common problem of flimsy stands that break easily.. 360 Rotating Clamp Free-Angle Adjustment - The side clamp of this Needlepoint Stand supports 360-degree smooth rotation, allowing you to adjust your cross stitch project to any comfortable angle effortlessly while stitching. No more straining your neck, back or hands to reach different areas of your workthis Workstand with Side Clamp lets you work in a relaxed posture, greatly improving stitching efficiency and comfort.. Height Adjustable to Fit All Users Scenes - This Height Adjustable Workstand with Side Clamp features flexible height adjustment adjustable range 20-34.5, suitable for adults, teens and crafters of all heights. Whether youre sitting on a chair, sofa or standing, you can easily adjust the Needlepoint Stand to your ideal working height, making it perfect for home, craft rooms and studios use.. Quick Tool Free Assembly Designed for convenience our cross stitch floor stand sets up in minutes with a simple tool free installation so you can start your crafting projects faster without any hassle.. Versatile for Multiple Craft Projects - This multi-functional Needlepoint Stand is not only a perfect Cross Stitch Floor Clamp, but also widely applicable for embroidery, needlepoint, bead embroidery, tapestry and other handcraft projects. The side clamp can securely hold various sizes of frames round, rectangular and fabric, making it a must-have tool for all craft lovers. A ideal workstand with Side Clamp to elevate your crafting experience.

Quick Installation Universal C-Clamp Install in seconds - Clamp the C-clamp fits most table thicknesses directly to your worktableno extra tools needed. Bottom rubber pads boost stability and prevent table scratches easy to disassemble for space-saving storage.. Integrated Screw Design Easy Secure Fastening, No Screw Idling - Adjustment screws are directly injection-molded integrally with plastic for a seamless fit, fastening easily and effectively preventing screw idling, ensuring long-term stable fastening.. Crab Clamp Design One-Hand Operation Smooth Adjustment - Featured with a crab clamp design simply twist the adjustment screw to open and close the clamp, enabling one-hand operation. This user-friendly design allows you to easily install the embroidery hoop and firmly maintain your desired hoop position, bringing a hassle-free using experience.. 360 Rotatable Multi-Angle Adjustment, Reduce Fatigue - The stand supports 360 free rotation and 220 up-down adjustment, helping you find the most comfortable stitching angle, reduce neck and back fatigue, and switch between embroidery projects hassle-free.. Vibrant colors sleek design Perfect gift for crafters - Featuring vibrant, long-lasting colors and a sleek, minimalist design, our stand is not only a stylish addition to any stitching space but also an ideal gift for cross stitch, hand embroidery and needlepoint enthusiasts..

Embroidery hoop stand With Phone Holder can Watching videos,and can clip to any embroidery hoops.. With our cross stitch stand floor Can Move Freely appropriate for round,square and other universal embroidery hoops. embroidery holder stand can lift to 16IN and rotate embroidery frame 360 degree at anytime.and adjust tilt Every direction. Cross stitch floor stand with Metal hinge clip , can easily clip to any embroidery hoops lift from 0.2in to 1.5IN. our embroidery frame stand with Metal base2.5LB,balance stable.and Can Move Freely play Tiktok and embroidery..

Hands-Free Stitching Support--- Keeps your project raised and supported so both hands stay free for smoother stitching and better control during embroidery, cross stitch, needlepoint, sewing, quilting, and tapestry work.. 2 Pole Sizes for Flexible Setup--- Includes 2 sets of wooden poles in 12.5 inch and 16.1 inch lengths, making it easier to choose the width that works better for different fabric sizes and project setups.. Secure Hold Without Damaging Fabric--- Grooved crossbars and 8 anti-slip clips help keep fabric from shifting or slipping while you work, helping maintain steadier tension without pulling or damaging the material.. Tool-Free Assembly and Easy Storage--- No extra tools are required. Insert the crossbars, screw in lightly, attach the fabric, rotate to tighten, and secure. The frame can also be taken apart for easier storage when not in use.. Smooth and Stable Wood Construction--- Made from wood and composite boards with a finely polished, burr-free surface for comfortable handling and steady support on tables, beds, chairs, sofas, or your lap..

Allows you to work with both hands free for better stitch control. Adjustable to different heights and widths. Stand comes complete with an 8.5 x 24 Split Rail scroll frame. 8.5 x 24 Split Rail scroll frame will fit fabric up to 21 wide. Perfect for use in your favorite chair, couch, bed, atop a table, or in the car. Not recommended for thicker fabrics such as burlap..

The ideal bundle for beginners and professional embroidery, sewing, and needlepoint enthusiasts alike, each kit comes with a free-standing wood stand, embroidery hoop, and 24 colorful embroidery threads. Weve included a high-quality, hands-free embroidery frame thats ideal for keeping your project in place while youre sewing from both sides to give you improved control and support during all your custom projects. Weve included 24 individual sewing threads, each 25-inch long, to give you plenty of creative options when sewing different patterns, designs, themes, or scenes. We know that everyone works at different heights depending on their style, size, and even project which is why our embroidery hoop is attached to an adjustable arm that lets you rotate it or move it up or down quickly. These embroidery kits make ideal gifts for any crafters, artists, or people who love to sew and create something all on their own.

? Say goodbye to wobbly frames. This cross stitch floor stand features a 15.6x10.1 oversized reinforced metal basesignificantly larger than standard standsdelivering exceptional anti-shake performance and load capacity. Three thickened non-slip rubber pads ensure rock-solid stability on carpets, hardwood, or tabletops, while protecting your floors from scratches. Whether youre working on large, heavy projects or high-tension embroidery, your frame stays exactly where you place it. - ?Designed to be the ultimate needlepoint stand for all your frames. The high-precision side clamp securely fits Q-snap frames, scroll rods, and all roundsquare embroidery hoops, supporting widths up to 32 inches. Built-in thickened silicone pads provide super-strong clamping force without marring or scuffing your wooden or plastic hoops. Your valuable crafting tools remain in pristine condition, project after project.. - Achieve your ideal ergonomic position with effortless ease. This cross stitch floor stand with side clamp features a 360 rotating clamp head, allowing you to flip your work to the backside instantlyperfect for starting and ending threads. Combined with multi-dimensional adjustments for height tool-free vertical tube, extension depth, and tilt angle, you can comfortably stitch while sitting upright, reclining, or even in a wheelchair, effectively reducing neck, shoulder, and wrist strain. - Unlike wooden stands that loosen or warp over time, this heavy duty metal cross stitch stand is crafted from aerospace-grade powder-coated steel. It offers superior structural strength, rust resistance, and scratch resistance, maintaining its rigidity even under high tension and daily use. The durable finish is easy to clean and unaffected by humidity, making it a professional-grade tool you can rely on for decades.. - - Get stitching in minutes, not hours. The stand features a tool-free quick-assembly designall key components and adjustments height, clamping force can be hand-tightened effortlessly. Ideal for beginners, seniors, or anyone with limited mobility. We stand behind our quality with strict pre-shipment inspections. If any issue arises, contact us for a free replacement, and expect a response within 12 hours. Your satisfaction is fully guaranteed..

Can be used with light box sketch board laptops iPad tabletsnotebook and more.High Quality,Strong metal, light weight and sleek in design,easy to carry.. Ventilated laptoplight box stand helps to keep your laptopslight boxsketch board running cooler to help prevent hardware damage.. Mesh metal platform helps to draw heat away from light box laptop tablet sketch board.. Adjustable height 12 positions for increased airflow and comfortable viewing, reading, drawing and typing.. Skidding Prevented Anti-Slip feet keep your laptop and light box in place and protects any surface it is placed on.Avoid unnecessary skiding in the course of drawing,typing,reading..

Embroidery workstand. Made in the UK.

OUTSTANDING AFTER-SALES SERVICEAll of our products have passed our strict inspection before any shipments. If any problems occur when comes to using for cross stitch stand floor, , and we will provide you with compensation service for your loss or replacement with a new product. If you have any questions about our for lowery workstand, , . PERFECTLY COMPATIBLECross stitch stand floor features a high precision side clamp that securely holds round hoops, Q-Snap frames, and scroll rods, supporting widths up to 20 inches. With strong clamping force, the needlepoint stand keeps even large and heavy frames steady without wobbling or slipping, ensuring consistent tension throughout your stitching. The contact surfaces are finely polished to prevent scratches or damage to your frames. Whether you use wooden or plastic hoops, this stand offers stable support so you can stay focused on every stitch without constant adjustments.. FULLY ADJUSTABLE IN MULTIPLE DIRECTIONSCross stitch stand floor features a 360 rotating clamp head with multi dimensional adjustments for height, extension depth, and tilt angle easily adapting to various seating positions and table setups. Flip your fabric effortlessly without removing the hoop, making thread changes and backstitching more efficient. The smooth swing arm and tool free controls allow easy, one handed adjustments. Ergonomically designed, this needlepoint stand reduces strain on the neck and shoulders and supports upright, reclined, or wheelchair use keeping you comfortable even during extended stitching sessions.. BUILT TO LASTCross stitch stand floor is made from aerospace grade, powder coated steel that offers superior structural strength, scratch resistance, and long lasting durability. Compared to wooden stands that can loosen or deform over time, this metal frame stays rock solid even under high tension and frequent use. The Lowery stand rust resistant coating is easy to clean and unaffected by humidity ideal for everyday embroidery settings. Its weighted base adds excellent stability, keeping large frames steady and wobble free. It a professional grade tool you can rely on for years to come.. EASY ASSEMBLYCross stitch stand floor features a tool free design for fast and efficient setup key components only need to be hand tightened to complete assembly. All adjustments, including height and clamping force, are completely tool free, making the stand simple and intuitive to use. Whether you're a beginner, senior, or someone with limited mobility, you can easily complete setup and adjustments without difficulty. Needlepoint stand stand ideal for everyday hobbyists as well as professionals who value efficiency making it a reliable, user friendly choice for every stitcher..

Versatile Sizes Includes 7, 10, and 14 hoops, offering flexibility for various projects from small to large.. Hands-Free Crafting Lap stand design allows for hands-free embroidery, quilting, and other needlework, enhancing comfort and efficiency.. Easy to Assemble Simple assembly process with no tools required, making it convenient to set up and start your project quickly.. Adjustable Height The stand is adjustable, allowing you to find the perfect height and angle for your crafting needs.. Portable and Lightweight Lightweight design makes it easy to transport, so you can take your crafting projects on the go.. Secure Grip Hoops provide a secure grip on fabric, preventing slippage and ensuring smooth, even stitching.. Ideal for Various Crafts Perfect for embroidery, cross-stitch, quilting, and other needlework projects, suitable for both beginners and experienced crafters..

FUNCTIONOur embroidery hoop stand can help you to finish embroidery, crafting, sewing, and other projects more easily, saving your time and energy.. PREMIUM MATERIALSOur embroidery stand is made of natural premium quality beech wood, lightweight, sturdy and wear-resistant, smooth, and without burr, making you more comfortable enjoying the process of DIY embroidery.. ADJUSTABLE DESIGNOur embroidery hoop holder has a height range of 13.39 in to 16.73 in.The embroidery frame can be rotated 360 degrees when the screws are loosened. Adjust the appropriate angle and height to make your embroidery more comfortable.. WIDELY USEDOur embroidery stands can be widely used for cross-stitch, needlepoint, embroidery, needlework, and so on. It is suitable for most kinds of embroidery hoops, whether round, square, or oval.. HIGH-QUALITY AFTER-SALESWe believe you will love this amazing cross stitch stand. If you have any questions about the parcels you received, please contact us for a replacement or return..

Stitch in Total Comfort Easily adjust the height from 21.6 to 35.4 and find your perfect angle with the 360 swiveling clamp. No more neck or back painjust relax and enjoy your favorite hobby. Steady Reliable The heavy 8x12 metal base 1.5mm thick stays firmly in place without wobbling. Its strong connectors and rust-proof coating ensure a sturdy, smooth stitching experience for years. No-Tool Assembly Forget the toolbox Just twist the base tight and use the built-in connectors to snap the frame together. Its quick, simple, and has you ready for a better sewing experience in no time. Fits All Your Favorites From round hoops and Q-Snaps to scroll frames up to 20, this stand holds them all. The strong grip keeps even heavy frames steady, so you can focus on stitching, not adjusting. Craft Anywhere You Love This stand slides easily under sofas or chairs so you can stitch in your favorite spot. Say goodbye to sore hands or strained eyes, making your long crafting sessions more relaxing.

What Will You Get1 beech wood embroidery hoop stand, 1 3IN Bamboo embroidery hoop, 1 6IN Bamboo embroidery hoop, 1 8IN Bamboo embroidery hoop. Durable Beech Wood MaterialOur cross stitch lap stand uses excellent natural beech wood. Under high temperature pocessing and polished craftsmanship, the embroidery frame stand is with smooth surface, no worry about hurting your hands and fabric. Suitable for BeginnersThis embroidery hoop holder set is simple to install and use, suitable for embroidery beginners. Adjustable Embroidery StandThe height of the wooden stand is adjustable range from 11.8 to 15.7 30-40cm. The 360 degree hoop spin knob enable you to get the fittest angle and distance to do your needlework. The base has been widened as well for greater stability. Please tighten the screw timely after adjustments to keep a good grip. Multipurpose Embroidery Craft StandThe needlework frame stand is a game changer for art craft lovers, like DIY embroidery, cross stitch, needlepoint, punch needle kit and other sewing projects. Whether you want to use it as a lap stand, table stand or floor stand is available.

This bundle consists of Lowery silver gray embroidery hoop workstand SG1 and gray hand-dyed Zweigart Aida 18 count cross-stitch fabric 18x21in by VolcanoStitching.. Effortless Crafting Comfort Lowery Stand offers a hands-free stitching experience reducing strain and promoting comfort, VolcanoStitching Hand-Dyed Fabric adds a calming aesthetic to your projects.. High-Quality Fabric Colorfast VolcanoStitching hand-dyed cross stitch fabric is made from premium-quality Zweigart Aida, ensuring that your finished projects look stunning and last for years to come.. Sturdy and Stable With its robust construction, the Lowery Stand ensures stability during intricate stitching, providing a reliable foundation for your crafting endeavors.. Versatile Workstation The Lowery Workstand, offers a versatile platform for various needlework, embroidery, and cross-stitching projects, ensuring adaptability for different crafting needs..

FUNCTIONOur embroidery hoop stand can help you to finish embroidery, crafting, sewing, and other projects more easily, saving your time and energy. and it can be applied to 11inches embroidery hoops at most.. PREMIUM MATERIALSOur embroidery stand is made of natural high quality beech wood, lightweight, sturdy and wear-resistant, smooth, and without burr, making you more comfortable enjoying the process of DIY embroidery.. ADJUSTABLE DESIGNThe length of the embroidery frame stand can be slide adjusted according to your needs, the angle of the hoop can be rotated 360 degrees. And the stand holder has a splint, you can clip the reference drawing to the drawing board, making you enjoy the process of embroidery more easily and conveniently.. BONUS TO OUR CUSTOMERSThe package comes with an embroidery Kit for daily use and 6,7,8inch round embroidery hoop. They can make you enjoy the fun of embroidery anytime, anywhere.. HIGH-QUALITY AFTER-SALESWe believe you will love this amazing embroidery hoop holder. If you have any questions about the parcels you received, please contact us for a replacement or return..

LARGE EMBROIDERY STANDOur large embroidery hoop stand is up to 37.4 high. 360-degree rotating hoop knobs and any-angle adjustments allow you to embroider at the perfect angle and distance. The base has also been widened to improve stability. Please tighten the screws promptly after adjustment to maintain a good grip... FUNCTIONOur embroidery hoop stand can help you to finish embroidery, crafting, sewing, and other projects more easily, saving your time and energy. and it can be applied to 11inches embroidery hoops at most... PREMIUM MATERIALSOur embroidery stand is made of natural high quality beech wood, lightweight, sturdy and wear-resistant, smooth, and without burr, making you more comfortable enjoying the process of DIY embroidery... WIDELY USEDOur table embroidery stands can be widely used for cross-stitch, needlepoint, embroidery, needlework, and so on. It is suitable for most kinds of embroidery hoops, whether round, square, or oval. The grooves on the base can hold scissors, thimbles, thread, and other small sewing tools... HIGH-QUALITY AFTER-SALESWe believe you will love this amazing large embroidery hoop holder. If you have any questions about the parcels you received, please contact us for a replacement or return...

Expandable Cross Stitch Floor Stand guofa wooden embroidery stand can be expanded up to 90cm35in, height ranges from 20cm to 90cm, very suitable for you making embroidery anywhere, you can sit on sofa, chairs or other places. 36cm-beech wood base makes this floor stand stably stand.. Adjustable and Rotating Embroidery Stand The unique swivel system and high-adjustable design allows you lift and rotate the frames stand at any angel and any height which meets most of embroidery lovers needs. NOTE embroidery hoop is not included.. Perfect Partner for NeedleworkThis floor stand can hold many types of embroidery hoops, like round hoops, square hoops, scroll stretch bars and etc, so you can use this hands-free frame stand to complete your embroidery, cross stitch, needlepoint sewing projects. A perfect gift for embroidery lovers on any occasions.. Sturdy Wooden Frame Stand Our embroidery floor stand is made of high quality beech wood, all the wooden parts are sturdy wood and sanded down, its very durable and wont snag your fabrics and hands.. Multifunctional Sewing Quilting Frame Because our embroidery stand can be adjusted to any height, so you can use on the desktop, or just place it on the floor, sitting on couch to do embroidery. You can also store easily when not in use, as this stand is foldable.. Package Contents Our embroidery hoop holder comes with all the parts and detailed instruction, hoop is not included, you can follow up the instruction to finish the installation. But if you encounter problems on installation or you miss some parts, contact us at any time.. Pleased Customer Service If you have any questions about our products, or if you receive a defective item, just feel free to contact us, we are always here to help you..

Made of natural organic beech wood. The wood is sturdy, smooth and attractive.. It s easy to fix canvas in the beginnig of work with the help of plastic holders and to remove it after finishing. You can easily roll your work if it is necessary. Frame rotates 360 degrees.The clip design on the frame is easy to use. Flexible plastic clips. The clips attached to the fabric and the bar all the way across keep the fabric very tight.. Great for bead embroidery, cross stitch, quilt, crewel and other types of needlework art crafts.. Clear instructions. Adjustment is made simply. Additional tools are not required for assembly. The stand fits with frames of other sizes by AllAboutEmbroiderUA.. It doesn't leave any deep trace on fabric when the project is done. Allows you to stitch easier, faster and more comfortable without holding the frame or fabric. It frees up both hands for stitching..

Made of natural organic beech wood. Well polished wood is smooth without any roughness and harmless to your hands.. This stand is a holder for scroll frame or hoop.. Perfect for bead embroidery, cross stitch, needlepoint, crewel, ribbon embroidery and other needle art crafts.. Additional tools are not required for assembly.. ATTENTION SCROLL FRAME or HOOP ARE NOT INCLUDED.

Made of natural organic beech wood. Well polished wood is smooth without any roughness and harmless to your hands.. Perfect for bead embroidery, cross stitch, needlepoint, handcraft, quilt, crewel and other needle art crafts... It s easy to fix canvas in the beginnig of work with the help of plastic holders and to remove it after finishing. You can easily roll your work if it is necessary. Frame rotates 360 degrees.The clip design on the frame is easy to use. Flexible plastic clips. The clips attached to the fabric and the bar all the way across keep the fabric very tight.. Frame rotates 360 degrees. You can easily scroll your work if it is necessary. The fabric is not damaged with the help of this frame amd remains smooth.. Additional tools are not required for assembly. Scroll frame could be changed to a frame of any other size from AllAboutEmbroideryUA brand..