Fitment Fit for 2000-2006 Toyota Tundra, 2001-2007 Toyota Sequoia. Notice Please tighten the zerk at any direction after refilling grease. DO NOT use excessive force to prevent copper zerk broken. And new ball joint don't need to add extra grease within 1 year.. Process Powder coated surface, can effectively prevent rust and corrosion. CNC machined provides bolder and safer pipe diameter. High frequency heat treatment alloy steel ball pin design, stronger and more durable. Thickened cold-drawn steel pipe, corrects the chassis after the vehicle is lifted. The ball pin has a hex hole for easy installation.. Advantage Dom tuber arms, solve the problem that the control arms don't fit after the vehicle is lifted. The ball joint is equipped with protecting cap to prevent sediment from entering, prolong the service life. Pre-installed dust boot shields socket components from wear-causing contaminants. Greaseable socket, allows new lubricant to flush contaminants, reduces corrosion. PU bushing enhances driving performance and service life, suitable for high temperature and low temperature weather.. KSP Support Please recheck your vehicle compatibility yearmakemodel in the product description before purchasing the control arms. We offer a 30-day refund, 24-momth free replacement service. If you have any questions, please feel free contact us, we will provide you with the most satisfactory solution..

Fitment2007-2009?Dodge Caliber ALL TYPES, Fits Only Engine 1.8L 2.0L 2.4L 2010-2012 Dodge Caliber ALL TYPES, Fits Only Engine 2.0L 2.4L. Fitment2007-2017 Jeep Compass ALL TYPES, Fits Only Engine 2.0L 2.4L 2007-2017 Jeep Patriot ALL TYPES, Fits Only Engine 2.0L 2.4L. BRTECs 12-month warranty and is included free with all BRTEC brand control arms. Your control arms are guaranteed to remain in good operating condition while you own it. All of our customers buying BRTEC brand control arms are covered. This policy and any postage at the domestic 1st Class rate involved in using it is fully covered by BRTEC at no cost to you.. Excellent Quality Undergo Impact, Wear, And Fatigue Testing To Help Ensure Quality And Durability. Interchange Part Number RK620065 RK620066.

EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils. COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates. RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on. STRONG AND DURABLE -- Engineered to match or exceed OE requirements. ENGINEERING EXCELLENCE -- With 50 dedicated engineers and 50 patents, MOOG engineers every part with purpose.

Premium QualityBuilt to stringent OE specifications and strict quality control standards by the professional OEM manufacturer, 100 function tested for reliable performance. Better PerformanceCorrosion-resistant coating for long-life performance, greased ball joints for easy maintenance, light-weight construction for application requirements, meet or exceed OE form, fit and function. Perfect FitDirect replacement for a proper fit, brand new control arms with ball joints are pre-assembled for a trouble-free installation. Amazing PriceFactory direct pricing with no middleman markup delivers exceptional value. Our mission is to supply the best control arm at the best prices.. Great Warranty3-Year Warranty please carefully check and confirm the detail fitment below in the description.

CARBON FIBER BEARINGS -- Induction-hardened studs for added strength, combined with a patent-pending carbon fiber-reinforced bearing, reduces socket friction compared to typical non-reinforced bearings for longer socket life.. HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils. LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it. ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure. ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature wear. QUALITY ASSURANCE?--?Laser-etched ID provides visible assurance of genuine MOOG quality. HARDWARE INCLUDED -- Comes with all necessary hardware for easy, fast installation. EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box.

Direct Fit, OE Replacement Suspension Kit. Kit Includes 2 Front Lower Control Arms with Ball Joints 2 Front Sway Bar Links 2 Front Outer Tie Rods. Vehicle Specific Check fitment information in the listing for compatibility. OE Reference Numbers 4806859065,4806959065. Aftermarket Reference Numbers 1013969,1015418,1016579,1016580,4806859065,4806959065,521127,521128,CK620269,CK620270,CMS86124,CMS86125,ES2382,GS86124,GS86125,K620269,K620270,K90390,MES2382,MK90390,MS86124,MS86125,RK620269,RK620270,SUS05699,SUS05700,SUS06781,SUS07401.

Replacement for 1991 - 1999 Jeep Cherokee - 1991 - 1992 Jeep Comanche. Kit Includes 2 Front Upper Control Arms 2 Front Lower Control Arms. Bushing Included Yes. Detroit Axle Suspension components are ready to meet the rigorous demands of todays foreign and domestic passenger cars, trucks and SUVs. 10-Year Warranty.

Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications. Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor. Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride. Durably designed - additional coatings offer long-lasting rust and corrosion resistance. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.

Cost-effectiveWe are a factory direct sales.Customers can spend a small amount of money and get high quality Control Arm and Ball Joint Assembly.. COMPLETE ASSEMBLYBrand new suspension control Arm Ball Joint Assembly,All parts are pre-assembled for a trouble-free installation.. HEAVY DUTY CONSTRUCTION Manufactured in ISO certified facility,Made with high strength steel tubing with solid plate mounting brackets for superior strength and durability.. PREMIUM QUALITYAt TUCAREST,We application engineer,design,manufacture and test all of our products to meet or exceed OEM equivalent parts in terms of aesthetics and performance.All TUCAREST products are tested to the extreme in order to perform under all extreme road and weather conditions.. PLEASE NOTE Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner,Do not count on year make and model only,please view compatability tab including the notes,or send us a message to make sure it matches exactly..

Fits Both Lower Driver and Passenger Sides. Improved ride comfort and longer life.. Direct fit, easy install, pre-greased, no maintenance required.. Built to strict quality standards, using sturdy, safe materials that are thick enough, anti deformation and anti fracture.. Replacement for 2013 Nissan Altima Sedan 2014 Nissan Altima.

EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and helps to inhibit wear, salt, road grime and oils. COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates. INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation. LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it. ENHANCED STRUCTURAL STRENGTH -- Heat processed to match or exceed OE requirements to inhibit premature failure. ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature wear.