MODEL NUMBERSEN01114 Flame Sensor Rod. PART NUMBERSSEN337, SEN0337, SEN441, SEN0441, SEN491, SEN00491, SEN1114, SEN01114, PSE-T19, B340888-2. PREMIUM QUALITY The replacement part is made from durable high quality material and well-tested by the manufacturer. EASY TO INSTALL This flame sensor is a direct replacement for many Trane and American Standard residential furnace models. ATTENTION Please consult your machine manual before ordering to make sure the replacement parts are correct.

- 62-22868-93 025-32625-000 hot surface ignitor is perfectly compatible with Goodman, Rheem, Ruud, and Weatherking furnaces NOTE Not Fit for -gec or -ged drum . replaces part number 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, 8553-5514 Contact us if you are not clear the compatibility, and we are here to help within 24 hours. - The 62-22868-93 furnace hot surface ignitor with wire connectors is used to light the oven burner and adjust the temperature normally. It fixes the symptom that the oven failing to heat or not heat properly. Use this high-quality replacement part to extend the life of the oven. - 62-22868-93 hot surface igniter replacement use premium Silicon Carbide material. It can generate high-energy electrical sparks in a very short time, enabling it to ignite fuel rapidly and reliably. Thanks to the superior properties of SiC, our igniters have an extended lifespan. - Our 62-22868-93 furnace ignitor is compatible with rheem systems and crafted from premium, manufacturer-tested materials. It offers exceptional heat resistance, improved durability, and reliable power connectivityresulting in higher load capacity and an extended service life. - Installation is a straightforward process. However, if the wire connectors are not compatible, it will be necessary to cut the old connector off and splice the wires directly using porcelain wire nuts. - Funmit adhere to provide all customers with a simple, streamlined shopping experience of large appliance replacement parts, and prove that we have the highest quality parts and service out there. We stand by our products, and our customers are our focus as a business. If you have any quality problem, please contact Funmit customer service team in time, and we will try our best to solve your problems.

Replacement numbers If you are not sure whether this motor can replace your old motor, please consult me first to avoid finding it unsuitable after buying it back and causing you unnecessary trouble. The 0131F00042SP replacement goodman furnace blower motor, fit for goodman, amana, and janitrol units, replaces obsolete part numbers 0131F00042. Compatible models This 12 hp blower motor compatible with various model model, such as ACS90704CXAACS90904CXAAMH80704BNAMH80704BX gas furnace. More models are listed below for your inquiry. You can also consult me directly, I will help you confirm in the first time. Parameter information Manufacturer Broad-Ocean, Manufacturer Part Y7L623E203T, Horsepower 12, Voltage 115, Hertz 60, Number of Phases 1, Amps 7.0, LRA 17, RPM 1130, Number of Speeds 4, Rotation CCWLE Counterclockwise Lead End, Shaft Diameter 12, Shaft Length 4, Height 9. High Quality Energy Saving This goodman blower motor are typically made of high quality materials and manufacturing processes, have high durability and reliability, and can operate stably for a long time. An energy-saving design can reduce energy consumption. Strict Quality Inspection Our products are made of high quality materials, undergo rigorous quality testing before leaving the factory, If you have any problems in the use of the process, we will take responsibility for this within a year.

Replace Numbers6205E, 1185157, 1186459, 1185157 ICP PARTS MTR BLR 12 HP ECM, E308134, HD44AQ260, 20180420, QCPASSED, D5005, D180611070085, RoHS, D5003, D1806111030600392, KMSAH013C84, V006A11B, C18060930, 00589, 00823960367484, 23960, 36748.. Compatibility 1Fit For American Standard Trane MOT13004, MOT-13004, MOT12888, MOT-12888, MOT12292, MOT12319, MOT12542 CarrierICP HD44AE137, HD44AE137A, HD44AE138, 1172987, 1173682, 5SME39HKL017, 5SME39HXL285, 5SME39HXL298, S81-948 and other 12 HP X13 Constant Torque Motors from all major manufacturers including Azure Digi-Motor 10800 excluding EON, 3.0, 2.3, and 2.5 ECM Motors.. Compatibility 2Fit for ICP, Heil, Tempstar, Arcoaire, Comfortmaker, Snyder General, KeepRite, and Day Night Models including FEM4P3600A2, FEM4P3600AL2, FEM4P3600AT2, FEM4X3600B1, FEM4X3600BL1, FEM4X3600BT1, WAHL364B1, WAHM364B1, WAHT364B1, WAPL364A2, WAPM364A2, WAPT364A2.. Durable and Energy-EfficientBuilt for long-lasting performance, minimizes wear and tear while offering excellent energy efficiency. Ideal for homeowners and businesses seeking a quiet, low-maintenance blower motor with multiple speed settings.. Warm TipsYou have purchased this product from our shop. We provide 2 years warranty..

Rotom part number RFB330. Draft Inducer Furnace Blower Motor Assembly. Replacement for InterCity Products.

Replace Part Number HT01CN241, 1172028, BE28316007. Fit for This 24v transformer is compatible with Carrier, Payne, Bryant, SmartComfort systems FEDFEU series, compatible with ICP, Heil, Tempstar, Comfortmaker and Arcoaire HVAC systems, compatible with various furnace, heat pump, AC unit, central air conditioners, thermostat control systems and gas valves requiring transformer 24V 40VA. Reliable Durable Build Built with high-purity copper windings and a reinforced housing, this HVAC transformer offers excellent conductivity and efficient heat dissipation. This robust design helps minimize the risk of equipment damage from short circuits or overloads, promoting more durable operation. Function The core function of this 40VA furnace transformer is to reliably convert a high-voltage 208240V AC input into a stable 24V AC output. This ensures proper power delivery for control circuits in most residential and light commercial HVAC systems, including thermostats, relays, and gas valves. Easy Installation Featuring a universal mounting base and clearly marked terminal connections, this unit allows for a direct swap with your old transformer. The straightforward installation requires no wiring modifications, saving time and effort during maintenance or repair. Disconnect power before installation.

NBK Parts number NBK-12463. Fits specific ICP Arcoair, Comfortmaker, Heil, Tempstar units and is a replacement for numbers Fasco, A170, 7021-10702, 7021-10299, 7021-8918, 7021-9362, 7021-9594, 7021-9935, 7021-9936, 1010312, 1010526, 1010527, 1010812, 1010928, 1011095, 1011097, 1011409, 1164280, 1164282 and HQ1164280. Includes Pipe Coupling, Clamps, Adapter Wires and Instructions.

This is a brand new ClimaTek Furnace Draft Inducer Exhaust Vent Venter Motor. Top Quality ClimaTek Replacement Part, Built to Last. This ClimaTek Part Directly Replaces Part A173, 7062-4578, 7062-4832, R7-RFB350, 66350, N173 More. Designed to work in ICP, Heil, Tempstar, Comfortmaker, Kenmore, Sears, Arcoaire Units and more. This Direct Replacement Furnace Inducer Motor makes for an easy replacement.

This is a Brand New ClimaTek Furnace Exhaust Venter Draft Inducer Motor. OEM Style Design and Easy Installation Make this a Top Quality Part. Direct Replacement for Part 7062-3793 7021-10702 7021-10299 1164280 A170 A171 More. Designed for ICP, Heil, Tempstar, Heil, Comfortmaker, Kenmore, Synder General, Arcoaire Furnaces. No Electrical Modifications or Adapters Needed.

OEM replacement blower for ICP model 1014338 and 119225-00 blowers. Ball bearing blower motor shaft support. 115V, 60 Hz, 2.6 amp power input for multiple uses. One-speed, 120 hp shaded pole motor, 3,000 RPM. UL recognized and CSA certified for quality assurance.

1.Applicable Model Fit for Carrier, Arcoaire, Tempstar furnace components, HVAC units, and SmartComfort systems.Fit for FEDFEU series e.g., FED002412, FEU003610, central furnaces, heat pumps, air conditioners, and gas valves requiring a 24V 40VA transformer. 2. Scope of Application Suitable for various HVAC systems, replacing models HT01CN241, BE28316007, and 1172028. Compatible with furnaces, heat pumps, air conditioners, gas valves, and other equipment using 24V control voltage, ensuring stable power supply and system protection. 3. Product Specifications Input voltage 208240V 5060Hz, output voltage 24V, rated power 40VA. Meets the low-voltage control requirements of most furnaces and HVAC systems, stably driving relays, control boards, and fan components. 4. Performance Advantages Effectively reduces electromagnetic noise and heat loss. High-efficiency magnetic flux design ensures stable output voltage and extends the service life of electrical control components in HVAC systems. 5. Easy Installation Can directly replace old parts without modification or additional tools stable operation is achieved immediately after installation, restoring the HVAC system to normal operation.

What has been upgraded The power of all power components has been increased, which extends their lifespan, and the problem of components being burned out due to overheating has been solved. Compatibility Compatible with a wide range of furnace blower controls, such as R40403-001, R40403-002, 20054502 and ST9120A, B or C. It can also work well with Lennox, Ducane, Armstrong and Trane furnace parts.. Replacement R40403-001, R40403-002, R40403-003, 20054501, ST9120C 2010, 1138-83-1002A, 87H88, R20054502, R38493B001, 87H8801. 1138-100, 1711, HCSI PLC0, 164322, T9AV5D12-22, 16391, CPC E 94V0, 1138-83-1003A.Ideal for furnace replacement circuit boards like Lennox control board, Ducane furnace parts and Armstrong furnace parts.. Easy Installation Provide convenient wiring and clear instructions. It fits both original and updated wiring systems, suitable for furnace blower installation.. Technical Specifications Operating line voltage ranges from 85 to 135 VAC, 5060Hz. Secondary control voltage is 18.0 to 30.0 VAC, 5060Hz. Maximum blower and inducer loadings are specified, guaranteeing reliable performance of furnace control circuit boards.. Function With user-selectable blower delay and 24V circuit protected by a 5A replaceable fuse, enhancing the control of Trane furnace control board and other furnace controls..

High Compatibility The B11726-06 Furnace Flame Sensor is a perfect replacement for multiple models, including B1172606 0130F00010 20488501 ACS90453BXA P1257001F P1257007F ACS90703BXA P1257002F P1257008F AP4513976 L38035 and more.It is compatible with renowned brands such as Kenmore, Amana, and Goodman, ensuring smooth operation of your equipment. Safe Reliable This furnace flame sensor has undergone rigorous testing to safely and effectively detect flames, resolving issues like frequent shutdowns or immediate flameouts after ignition. It guarantees a secure and comfortable home environment. Wide Model Compatibility GMS80603AX, GMS80604BX, GMS80603AN, GMS80604BN, GMS80804BN, GDS80403AN, GDS80603AN, GDS80804BN, GDS81005CN, GMSS960402BN, GMSS960603BN, GMSS960803BN, GCSS960402BN, GCSS960603BN, GCSS960804CN, GCSS961005CN, GCSS961205D, etc. Upgraded Igniter Our B11726-06 Goodman Furnace Igniter is made of high-quality wear-resistant metal and ceramic materials, featuring fast ignition, high-temperature resistance, and long-lasting effectiveness, making it an ideal replacement part for gas furnace sensors. Quality Service Assurance Customer satisfaction is our priority. If you have any questions about the 0130F00010 Flame Sensor or other products, please feel free to contact our customer service teamwere here to assist you.

This is a brand new ClimaTek Furnace Draft Inducer Exhaust Vent Venter Motor. Top Quality ClimaTek Replacement Part, Built to Last. This ClimaTek Part Directly Replaces Part 1011350 HQ1011350FA. Designed to work in ICP, Heil, Tempstar, Comfortmaker, Kenmore, Sears, Arcoaire Units and more. This Direct Replacement Furnace Inducer Motor makes for an easy replacement.

This is a brand new ClimaTek Furnace Draft Inducer Exhaust Vent Venter Motor. Top Quality ClimaTek Replacement Part, Built to Last. This ClimaTek Part Directly Replaces Part 11925400, 11925400SP, 7021-10048, 7021-10580, A169, 45KC67, More. Designed to work in ICP, Heil, Tempstar, Comfortmaker, Kenmore, Sears, Arcoaire Units and more. This Direct Replacement Furnace Inducer Motor makes for an easy replacement.

This is a brand new ClimaTek Furnace Draft Inducer Exhaust Vent Venter Motor. Top Quality ClimaTek Replacement Part, Built to Last. This ClimaTek Part Directly Replaces Part 1014433, 1014529, 10011645, 10011945, 119290-00, J238-150-1521, 1013517, RFB433, 66529, More. Designed to work in ICP, Heil, Tempstar, Comfortmaker, Kenmore, Sears, Arcoaire Units and more. This Direct Replacement Furnace Inducer Motor makes for an easy replacement.

This is a brand new ClimaTek Furnace Draft Inducer Exhaust Vent Venter Motor. Top Quality ClimaTek Replacement Part, Built to Last. This ClimaTek Part Directly Replaces Part 1005131, 1000814, 1007360, HQ1007360EM, K37MYNW344, More. Designed to work in ICP, Heil, Tempstar, Comfortmaker, Kenmore, Sears, Arcoaire Units and more. This Direct Replacement Furnace Inducer Motor makes for an easy replacement.

LIMIT SWITCH FEATURES- Bimetallic chip contact sensor, sensitive response, fast response speed, safety, accurate action temperature, durable, no arc phenomenon.. MANUAL ROLLOUT- SPST Limit Thermostat. The SRL series of 12 bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design.. EASY TO INSTALLATION-40 secs to install. PACKGE INCLUDES- 2 X New L350 furnace replacement limit switch. Please confirm your product model before purchase see product information for details.

Compatible with The LH33GZ001 hot surface ignitors is compatible with Carrier, compatible with Bryant, compatible with Payne, compatible with Heil, compatible with Comfortmaker, compatible with Tempstar, etc. Replace Part Number LH33GZ001, LH33ZG001, 1176919, 789A-751A1, SN082KX, IGN001, IGN70, 41-426N, 201657-03S, IGN02004, 20165702S, 20165703, B1401015S, etc. Reliable Quality Made of reliable materials with high-temperature resistance and durability, this LH33GZ001 replacement is a direct swap for old components. Efficient Ignition This hot surface igniters has been optimized and upgraded for fast, efficient ignition, ensuring smooth startup and stable running of your heating equipment. Plug-and-Play The LH33GZ001 repair part features a plug-and-play design for easy installation, and it matches precisely without any modification required.

This is a Brand New Upgraded ClimaTek Condenser Contactor with a Sealed Contact. Top Quality ClimaTek Replacement Part, Built to Last. This ClimaTek Part Directly Replaces Part s HN51KC024, HN51CB025, HN51KB024, P282-0311, More. Designed to work with Carrier, Bryant, Payne, DayNight, ICP, Heil, Tempstart, Comfortmaker, Kenmore Units and Many More. Exact Fit- No Electrical Adapters, Modifications, Mounting Hole, or Wiring Changes Needed.

This is a Brand NEW ClimaTek Furnace Air Pressure Switch. Top Quality ClimaTek Replacement Part. Made in the U.S.A.

This is a Brand New ClimaTek Upgraded 12 HP, 115v Furnace Blower Motor. Top Quality ClimaTek Replacement Part, Built to Last. This ClimaTek Part Directly Replaces Part 1012514 More. Designed to work in ICP, Heil, Tempstar, Comfortmaker, Arcoaire, Synder General, Kenmore Furnaces, More. This Direct Replacement motor makes for an easy replacement.

0130F00010 Flame Sensor-4pcs 0130F00010 Flame Sensor Total length3.8 inchesprobe95 mm used on the gas stove machine to detect the flame and protetct you from gas hazards and close the valve in time.. Goodman Flame Sensor Furnace 0130F00010 Flame Sensor designed for Goodman Amana kenmore brands and replaces part numbers B1172606 B11726-06 20488501 ACS90453BXA P1257001F P1257007F ACS90703BXA P1257002F P1257008F. Flame Sensor for Furnace Models GMS80603AX, GMS80604BX, GMS80603AN, GMS80804BN, GDS80403AN, GDS80603AN, GDS80804BN, GDS81005CN, GMSS960402BN, GMSS960603BN, GCSS960402BN, GCSS960603BN, GCSS960804CN, GCSS961005CN, GCSS961205D, ACEC800403AXAA, ACEC800603AXAA, ACEC800603BXAB, ACEC800804BXAA, ACEC800804BXAB, ACEC800805CXAA, ACSH960905DXAA, ACSH961155DXAA, ACSS920402BNAA, ACSS920603BNAA, ACSS960603BNAA, ACSS960804CNAA, ACSS961005CNAA, APG13240451BB, APD1436080M41AB, APG13300701BB, APG1336070M41AD.. 100 Quality Guarantee 0130F00010 is made from durable high quality metal material for rapid-ignition and have been tested strictly before they are dispatched from the factory to ensure their quality.It ups to the original factory standard even than oem part.. Global Gradse Service LUXRILIX aims for simplicity and excellence in the quality of our services. We hope that you enjoy Online Shopping experience and welcome any comments or suggestions you have. If you are not satisfied with our products, please feel free to contact us for the full refund or new replacement..

This is a Brand New ClimaTek Furnace Air Pressure Switch. Top Quality ClimaTek Replacement Part, Built to Last. Designed to Replace Part 1013801 More. Designed for ICP, Heil, Tempstar, Comfortmaker, Sears, Arcoaire, Synder General, Kenmore Furnaces more. Made in the USA.

This is a Brand New ClimaTek Furnace Air Pressure Switch. Top Quality ClimaTek Replacement Part, Built to Last. Designed to Replace Part s 1013802 More. Designed for ICP, Heil, Tempstar, Comfortmaker, Sears, Arcoaire, Synder General, Kenmore Furnaces more. Made in the USA.

This is a Brand New ClimaTek Furnace Air Pressure Switch. Top Quality ClimaTek Replacement Part, Built to Last. Designed to Replace Part s 1170947, HQ1008816TR, 1008816, HQ1008819TR, 1008819, HQ1008944TR, 1008944, HQ1010895TR 1010895, More. Designed for ICP, Heil, Tempstar, Comfortmaker, Sears, Arcoaire, Synder General, Kenmore Furnaces more. Made in the USA.

This is a Brand New ClimaTek Furnace Air Pressure Switch. Top Quality ClimaTek Replacement Part, Built to Last. Designed to Replace Part s 1174276, 1013529, More. Designed for ICP, Heil, Tempstar, Comfortmaker, Sears, Arcoaire, Synder General, Kenmore Furnaces more. Made in the USA.

This is a Brand New ClimaTek Furnace Air Pressure Switch. Top Quality ClimaTek Replacement Part, Built to Last. Designed to Replace Part s 0130F00041 More. Designed for Goodman, Amana, and Janitrol Furnaces. Made in the USA.

This is a Brand New ClimaTek Transformer converting 208240 volts down to 24 volts for HVAC controls.. Top Quality ClimaTek Replacement Part, Built to Last. This ClimaTek Part Directly Replaces Part s 1082611 HQ1082611PU. Designed for ICP, Heil, Tempstar, Comfortmaker Furnaces More. No Electrical or Hardware Modifications Required- Plug and Play Note that if you have an existing or intermittent low voltage short in your system, it may destroy the new transformer upon installation. Low voltage shorts need to be corrected before replacing the transformer.

Angle - sensor offset degrees 90 Length - mounting flange to sensor tip inch 2-1732. Length - sensor offset inch 1-316 Termination 14 Inch male quick connect. Heating, ventilation, air conditioning or refrigeration parts and accessories should only be installed by qualified technicians.. Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific application.. SD products come in Supplying Demand packaging..

This is ICP OEM Part.

Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or FULL refund, no questions asked. Buy with confidence. MODEL NUMBER 52W29 Furnace Flame Sensor. The flame sensor monitors the burner to detect whether or not a flame is present. If the sensor does not detect a flame, it shuts the gas valve off, preventing raw gas from dumping into your home. Over time, a flame sensor may lose it's the ability to sense the flame, even when the flame is present.. HIGH COMPATIBILITY It is made exactly fit for most top name brands Lennox, Armstrong Ducane and replaces part numbers 52W2901, LB47940A, 31L71, 31L7101 - Fits Most Series of Models G40, G41, G50, G51, G60, G61, and G71 Furnaces. For details, see below or if you are unsure about the compatibility, feel free to contact us and we will be happy to help you.. PREMIUM QUALITY The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. The total length is approximately 5.3 inches.. SAVE TIME AND SAVE MONEY Inexpensive way to fix or repair a furnace. This part fixes the following symptom The furnace does not heat..

Includes 1 36tx16 Limit Switch Thermostat .. Switch Action Manual Reset, Terminals Vertical 14.. Cut Out 350 F, Uses 36T Electrical Ratings.. The SRL series of 12 bimetal temperature controls offers proven reliability in a compact, versatile, cost-effective design..

This is a brand new ClimaTek Furnace Fan Control Circuit Board. Top Quality ClimaTek Replacement Part, Built to Last. This Control Board is Designed to Replace Part s HK61EA002, 1005-161, CESO-130003-00 More. Designed to work in Carrier, Bryant, Payne, ICP, Heil, Tempstar, Comfortmaker, Kenmore, Arocaire Furnaces and More. No Electrical Modifications or Adapters Needed.

This 1380679 Gas Furnace Flame Sensor Rod For Heil Quaker Comfortmaker Tempstar Furnace, Rod Measures 2 Inches Long, Wire Lead Measures 35 in with a 14 in Male Insulated Terminal, Replacement Flame Sensor Rod part number SP209. upgrading old appliances or just trying to simplify your daily life, this accessory is a practical accessory and a solution that can improve the way you use appliances, making household chores easier and more efficient.. Suitable for daily home life, busy household life, and routine electrical operations. Whether it's daily household chores or home maintenance, this accessory can seamlessly adapt to various home use scenarios. This accessory is made of high-end and durable materials with strict manufacturing standards, ensuring long-lasting durability. It undergoes strict quality inspection and can provide consistent and durable performance for household needs. Meet common needs for household appliances, enhance functionality or address potential inconveniences. It optimizes device performance, reduces the hassle in daily operations, and expands the practicality of the device.

Made in China. Package length 2.0. Package width 11.0. Package height 3.0.

This part is compatible with models including NTN5100BKA1,NDN5100BFB1,GDE100F20G1,NPGB060G1SA,PGAD60G1K5,NCGM100EHA1LP,NUGM050EFA1,NDC7050BFA1,GDL050N12A1,NDC7050BFA3,NUG5050BCB2,PGMF48H090C,NCGM050EFA1NATURAL GAS,NDC7050BFA2,NPGB075G2SA,NUG3100AHA1,PGAD42D1K5,GCK075N12C3,NTN5075BHA1,PGAA18B1K6,NUG3075AFB1,NPGB048F1HA,NTN6075FBA1,NCC5075BHB1,NCC5075BHB2,NUG9100FHA1,PGMD18G0606,NUG3075AFA1,PGMD18G0605,NDF125J20A1,PGMD18G0604,NCGM075EGA1,GCK075N12C1,NCGM075EGA3,NDN5050BFA1,NTC5050BFE2. This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including 1011927,1009838,ST9120G4038,1011543,1008773,1008786,1009836,1009837,1010031,1160192,1150489,20054501. Genuine Original Equipment Manufacturer OEM part. Compatible Brands Icp,Arcoaire. This fan control relay part number 1170063 is for furnaces. Shut off the house circuit breaker for the furnace before installing this part.

12HP 115V 60HZ 1130 RPM4Speeds 7.0A Include 1 pcs capacitor 20F370V7.0A. Replace Blower Motor Models 0131F00042 B13400-24S 0131F00022SP Y7L623E203T Compatible with goodman furnace Amana Janitrol Furnace such as ACS90704CXAACS90904CXAAMH80704BNAMH80704BX gas furnace.. RotationCCW Lead end, CW shaft end, Shaft Diameter 12, Body Diameter 5-5848 Frame. 2 Years Manufacture Warranty.. Upgraded OEM Standard Quality..

PRODUCT PARAMETERSThe 903110A furnace ignitor has 1.95 Nitride ceramic heating element, 1.25Ceramic insulator body with M6 screw, swift bracket. The length of cable20 AWG UL 3122 specification is 9 inch and the temperature rating of cable is 200. The male plug is housing with terminal or equivalent terminals. The voltage is 115V 10-1598V-127V. The peak temperature is 1180 . The time to reach 982 at 115v 12.5 sec. COMPATIBILITY This kit is designed to be compatible with various furnace models. Replacement Part Numbers 632313, 632313C, 903110, 903110A, FC047. Installing the 903110A Furnace Hot Surface Ignitors is a breeze. You don't need any professional tools, just plug them into your existing furnace system and you're done. Compatible with Nor-dyne gas stoves M1MA056, M1MA070, M1MB056, M1MB070, M1MB077, M1MB090, M1MC056, M1MC070, M1MC077, M1MC090, M1MD056, M1MD070, M1MD077, M1MD090,etc.. EXCELLENT PERFORMANCE The 903110A furnace hot surface igniter is made of high-quality materials with a silicon nitride structure that ensures excellent thermal conductivity and resistance to extreme temperatures. The 903110A ignitors with plug are engineered to provide optimal performance, ensuring quick and efficient ignition of your furnace, thereby improving fuel combustion and energy efficiency. PROBLEM SOLVINGThe 903110A Universal Furnace Hot Surface Ignitors easily solve igniter failure problems such as discontinuous igniter, abnormal multimeter reading should be 9-17 ohms, igniter does not glow, cracking, burned-out, cracking, moisture, etc. Simply replace our nitride heater igniter and the heater will operate normally. These universal 115 Volt 903110A Furnace Hot Surface Ignitors promote better fuel combustion, leading to reduced energy consumption and lower heating bills. WHY CHOOSE US If you have any questions about the 903110A Furnace Ignitor, please contact us and we will resolve them for you immediately. We will strictly implement quality control products, so that our customers can buy at ease and use them satisfactorily.

Wide CompatibilityThis HQ1085914TX Furnace Fan Control Board is used to replace damaged or faulty furnace blower control boards, perfectly compatible with Sears, Snyder, Heil and ComfortMaker furnace systems, and can serve as a reliable replacement part for faulty furnace components. Core Control Time Delay FunctionFurnace Control Circuit Board acts as the core controller to manage fan operation and fan timing with time delay function, ensuring stable running of the blower and efficient heating and cooling cycle. High-Quality MaterialsAdopts OEM standard design and high-quality materials. Stable performance, high temperature resistance, meets daily long-term usage needs. Reliable and durable. LED Status Indicator Easy InstallationBuilt-in clear LED status indicator for easy testing and fault diagnosis turn off power and take photos of original wiring before installation for safety. 6-Month Warranty6-month free returnexchange and comprehensive after-sales support contact us promptly for any installation issues.

Highest Quality Counter Clockwise, Four-Speed Replacement ICP 1013341 Furnace Blower Motor.. 12HP, 115Volts, 60Hz, 8 Amp, 1050 RPMs. EQUIVALENT TO ICP 1013341, 1009053, 1012513, 1172487, 603688, 604007, 609277, 609887, 84748, 99728. 2 Year Manufacturer Warranty.

Packard number 66421. Furnace Draft Inducer Motor. Direct Replacement for ICP Heil, Comfortmaker, Tempstar, Arcoair 1178421, 1192142, Fasco 71626445, 7162-6445. Capacitor Required - TOC4. 115 HP, 208-230 Volts, 0.68 Amps, 3180 RPM.

Parts Number 318984-753 Inducer Draft Motor.The specification of this motor is 115V, 60Hz, 65W. Package Includes Fan Blade, Blower Wheel Wiring Harness 2 Shaft Diameter and Length 516 x 1.85 inch. Total Length 5.18 inch.. Replaces Part 2347563, TJ318984-753, 3195827,AP5634784,14001, MARS90971, 10704, 318984753, 323435-730, 321373-712, 321373712. Repair Symptoms Will not drain, Pumps but will not spin, Noisy, Leaking.Note Before installing the product, please disconnect the power supply and wear work gloves to protect your hands.. Premium QualityThe replacement part is made from durable high quality material and well-tested by the manufacturer.Non original aftermarket part. Fits OEM Standards. About Us For any reason you're not completely satisfied, you can ask for a replacement or full refund. If you are not sure whether this replacement part correctly fit your appliance, please feel free to contact us or ask a question through Amazon..

This is a Brand New OEM Furnace Ignitor Igniter. Top Quality OEM Replacement Parts.

ICP 1172550 Control Circuit Board. Use Heil, Tempstar, Comfortmaker, Arcoaire, ICP Single Stage Gas Furnaces.

Duralight Two Year Replacement Warranty. Made In USA. Exact Fit with No Adapters or Wiring Changes Required. Direct Replacement Part For Most Rheem, Ruud, Weatherking Furnaces With Hot Surface Ignitors - Will Not Fit Drum Heat Exchanger Type Furnaces. Replaces Part Numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514.

Replacement draft inducer motor. Designed for Emerson, Fasco, ICP, Jakel, Mars and Rotom model. Runs at 3000 rotations per minute.

This is a Brand New Furnace Flame Sensor. When the flame sensor goes bad, the furnace will light for several seconds and then turn back off on the flame sensor safety.