This shock damper provides a smoother ride and better overall damping management.. Spring shock absorber made of high quality steel alloy material, good strength and durability.. Rate Spring 180 Pound, Bolt Hole Size 58 0.625, 916 hardened shaft.. Rear shock damper comform to strict quality control standards, dependable to use.. One order comes with 2 pieces for both right and left side.

COMPATIBILITY Fits 1996-2000 Isuzu Hombre 1995-1997 Chevrolet Blazer 1998-2005 Chevrolet Blazer 1998-2004 Chevrolet Blazer 1998-2001 Chevrolet Blazer 1999-2001 Chevrolet Blazer 2001-2005 Chevrolet Blazer 1983-1994 Chevrolet S10 Blazer 1982-1993 Chevrolet S10 1994-2003 Chevrolet S10 1994-1998 Chevrolet S10 1999-2003 Chevrolet S10 2002-2003 Chevrolet S10 2004-2004 Chevrolet S10 1992-1994 GMC Jimmy 1995-2002 GMC Jimmy 2003-2005 GMC Jimmy 2005-2005 GMC Jimmy 1983-1991 GMC S15 Jimmy 1982-1990 GMC S15 1991-2004 GMC Sonoma 1994-2003 GMC Sonoma 1991-1991 GMC Syclone 1992-1993 GMC Typhoon 1991-2001 Oldsmobile Bravada. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. capacity limited by suspension, tires and transmission see owner's manual. EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency. CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces. LONGER SERVICE LIFE -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life. IMPROVES PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade.

This shock damper provides a smoother ride and better overall damping management.. Spring shock absorber made of high quality steel alloy material, good strength and durability.. Rate Spring 200 Pound, Bolt Hole Size 58 0.625, 916 hardened shaft.. Rear shock damper comform to strict quality control standards, dependable to use.. One order comes with 2 pieces for both right and left side.

Specifically for GM Short Wheel base SUV's. Pre-Assembled with a new Steel Coil Spring. New Spring Seat, Isolator and Mounting Hardware. Universal Shock Fits Left or Right Side. Replace in Pairs..

Fit Perfectly For Infiniti M35x 2006-2010 AWD For Infiniti M45x 2006-2010 AWD For Infiniti G35x 2003-2008 AWD For Infiniti G37x 2008-2013 AWD. Note Will not fit RWD model The rear is true coilovers instead of divorced coils. Street Performance T6 Series Suitable for street performance driving, upgraded damper knob easier to adjust, high-quality damping oil with better viscosity, upgraded full aluminum plates. Achieve the balance between comfort, speed and safety. 24 Levels Adjustable Damper for More Control Level 0-8 suggest for street useLevel 9-16 suggest for mountain useLevel 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs. High Tensile Spring Spring rate Front 12kgmm 672 lbsin Spring Rate Rear 10kgmm 560 lbsin with spring preload 7-10 mm. High tensile performance spring - stress tested over 600,000 times while the spring distortion is less than 0.04. Adjustable Height Thread-type ride height adjustment for 1-3 inchesdoes not keep the original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.

Fit Perfectlyfor Honda Civic 1988-1991 EC ED EE EF Rear fork type bracket model only for Honda Civic 1992-1995 EG EH EJ for Honda Civic 1996-2000 EJ EK EM for Honda CR-X 1988-1991 ED EE EF for Honda CR-X del Sol 1992-1995 EG EG1 for Acura Integra 1990 -1993 DA DB for Acura Integra 1994-2001 DC2 DC4. Spring Rate Front Spring rate 8 kgmm 448 lbsin 5 kgmm 280 lbsin with spring preload 7-10 mm. Spring length Front 180mm Spring length Rear 180mm Coilover overall length Front 365mm-410mm Coilover overall length Rear 435mm-480m. Adjustable Height The height is adjustable for 1-3 inchesNotice does not keep to the original ride height., allowing you to have a more aggressive stance, This design helps eliminate turning noise and also improves steering feel and response. Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

High grade material. Germany imported Elektrisoal material wire, German Huntsman epoxy. Providing High Electrical Resistance, strong Spark from plugs, and being resistant to Corrosion and Abrasion. Delivers more torque quicker starts instant throttle response better acceleration a smoother idle and improved gas mileage. Reduces misfire and hesitation, these coils are curved not straight. This curved coils DONOT fit the 2004 and newer F150 with the 5.4L V8. Fit For Most of Ford F150 F250 F350 F450 E150 E250 E350 E450 Crown Econoline Excursion Expedition Explorer Mustang Thunderbird Lincoln Navigator Town Mercury Cougar Grand Marquis Mountaineer,Engineered specifically for 1998 to 2008 4.6L 5.4L and 6.8L Ford 2 valve modular engines. Compatible Part Numbers DG457,DG47213062237, 1972290, 1L2U12029AA, 1L2U12A366AA, 1L2Z12029AA, 1L2Z12029AC, 21941483, 21941485, 21941505, 3W7Z12029AA, 71HM12300AA, 72HF12300AA, 75HF12300AA, 88921369, A780X12300HA, C409, C469, C471, D1FZ12300A, D1RY12300A, DC263, DC88, DCE258, DCE261, DCE263, DG467, DG473, DG481, DG491, DG508, E222, F523, F7TU12A336CB, F7TU12A366AB, F7TU12A366BA, F7TU12A366CC, F7TU12A366CD, F7TZ12029AB, F7TZ12029BA, F7TZ12029CA, F7TZ12029CB, F7TZ12029CC, FD493, FD503, FD79X. Package Included 8 pcs of curved DG508 coils.

Fitmentfor Honda Accord DXEXLX CB7 CD5 CD7 1990-1997 for Honda Acura CL 1997-1999, Chassis Code YA1. High Tensile Spring Front spring rate 10 kgmm 558 lbsin Rear spring rate 7 kgmm 392 lbsin. Spring length Front 200mm Spring length Rear 200mm Coilover overall length Front 450mm-490mm Coilover overall length Rear 525mm-620mm. Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.NOTE DOES NOT keep to original ride height.. Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

Applicationfor Mazda Miata MX5 NA NB 1989-2005 for Mazda Miata Base Convertible 2D 1990-2005exclude 1998 for Mazda Miata SE Convertible 2D 2000-2003 for Mazda Miata M Edition Convertible 2D 1994-1997 for Mazda Miata LS Convertible 2D 2000-2005. High Tensile Spring Front 7kgmm 392lbsin Rear 6kgmm 336lbsin Spring Preload 7-10 mm Spring length Front 180mm Spring length Rear 160mm Front spring inner diameter70.5mm Rear spring inner diameter 70.5mm. Lowering Kits This coilovers can lower ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.NOTE DOES NOT keep to original ride height.. Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

This shock damper provides a smoother ride and better overall damping management.. Spring shock absorber made of high quality steel alloy material, good strength and durability.. Rate Spring 250 Pound, Bolt Hole Size 58 0.625, 916 hardened shaft.. Rear shock damper comform to strict quality control standards, dependable to use.. One order comes with 2 pieces for both right and left side.

Fitment for Volkswagen Golf MK5 MK6 2003-2012 for VW Jetta MK5 2006-2011for VW B6 Passat 2006-2010 for VW EOS 2007-2014 for VW CC 2009-2014 for VW Tiguan 2009-2014 for VW Beetle 2012-2014 for Audi A3 FW2006-2014 for Audi TT FWD 2006-2014. Lower HeightThe ride height is adjustable for 1-3 inchesnot keep to original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. High Tensile Spring Front 5kgmm 280lbsin Rear 3.5kgmm 196lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance.. Factory Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Application for Toyota Camry 1992-1994 for Toyota Camry 1995-2001 for Toyota Solara 1999-2003 for Lexus ES300 1992-1994, for Lexus ES300 1995-1996 for Lexus ES300 1997-2001 Exclude Adjustable Suspension for Toyota Avalon 1995-2003. Spring Rate Front 10kgmm 560 lbsin Rear 6 kgmm 336 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Lower Height The ride height is adjustable for 1-3 inchesnot keep to original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. Package Include Complete coilovers assembly 2 front and 2 rear a pair wrench for height adjustment, include professional installation. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Applicationfor VW Golf MK4 FWD 081997-122007 for VW New Beetle FWD 011998-112010 for VW Jetta MK4 1999-2005 for Seat Leon FWD 111999-062006. High Tensile Spring Front 8 kgmm 448 lbsin Rear 6 kgmm 336 lbsin Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Adjustable Height lowering 0-25mm. Its a replacement part that retains maximum height and comfort of the original. Package Include springs and shocks for front and rear, no top mounts included, a pair wrench for height adjustment. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

ApplicationFor Ford Mustang 1994-2004 Base SN95 ConvertibleCoupe For Ford Mustang 1994-2004 GT SN95 ConvertibleCoupe. 24 Levels Rebound Damping Force For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff. Adjustable Ride Height The height is adjustable for 1-3 inchesdoes not keep the original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. High Tensile SpringFront 8 kgmm 448 lbsin Rear 7 kgmm 392 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Applicationfor VW Golf MK4 1J1 FWD 081997-122007for VW Beetle 9C1, 1C1 FWD 011998-112010 for VW Jetta MK4 1J9M1999-2005for Seat Leon 1M1 FWD 111999-062006. High Tensile Spring Front8 kgmm 448 lbsin Rear 6 kgmm 336 lbsin Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Adjustable Height lowering 0-25mmdepends on vehicle models,allowing you to have a more aggressive stance. Package Include springs and shocks for front and rear, no top mounts included, a pair wrench for height adjustment and two spring seat. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Application for Honda Accord VI 4-door sedan CG1 CG5 CG6 1998-2002 for Honda Accord VI 2-door coupe CG2 CG3 1998-2002 for Acura TL II UA5 1999-2003 including type s for Acura CL II YA4 2001-2003. High Tensile Spring Front 10kgmm 556 lbsin Rear 6kgmm 336 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance.. Lowering Kits The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.NOTEDOES NOT keep to Original Ride Height.. Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustment, and they will give you a more comfortable riding experience by reducing the pressure on the joints. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

Application for Honda Civic 2-door Coupe FG1FG2 2006-2011for Honda Civic 4-door Sedan 2006-2011 FA1FA2FA3FA4FA5 FD1FD2FD3FD4FD6FD7 for Acura CSX 4-door Sedan Canada 2006-2011. Note not for the Mugen trim level. High Tensile Spring Front 7 kgmm 392 inlbs Rear 6 kgmm 336 inlbs. Under 600,000 times continuously test, the spring distortion is less than 0.04. Lower Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.NOTE DOES NOT keep to Original Ride Height.. Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

Fit Perfectly for Acura RSX Type-S 2002-2006 for Honda Integra DC5 2001-2006. Street Performance T6 Series Suitable for street performance driving, upgraded damper knob easier to adjust, high-quality damping oil with better viscosity, upgraded full aluminum plates. Achieve the balance between comfort, speed and safety. 24 Levels Adjustable Damper for More Control Level 0-8 suggest for street useLevel 9-16 suggest for mountain useLevel 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs. High Tensile Spring Spring rate front 8 kgmm 448 lbsin Spring rate Rear 6 kgmm 336 lbsin with spring preload 7-10 mm. High tensile performance spring - stress tested over 600,000 times while the spring distortion is less than 0.04. Adjustable Height Thread-type ride height adjustment for 1-3 inchesdoes not keep the original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and respo.

Compatibility Fits 2009-2014 Ford F-150 2010-2012 Ford F-150 2011-2011 Ford F-150 2013-2014 Ford F-150. Shock Absorber Assembly This load-adjusting suspension system is engineered to reduce sag load and helps maintain vehicle control when hauling or towing heavy loads. Heavy-Duty Coil Springs Integrated heavy-gauge coil springs make these shock absorber replacements ideal for supporting up to 1,200 lbs of additional load. Self-Lubricating Fluid Seal Each assembly is nitrogen gas-charged, uses a self-lubricating fluid seal, and features OE all-weather hydraulic fluid to enhance durability and performance. About DRiV We are driven to deliver the automotive products and services our global customers want.

Street Performance T6 Series Suitable for street performance driving, upgraded damper knob easier to adjust, high-quality damping oil with better viscosity, upgraded full aluminum plates. Achieve the balance between comfort, speed and safety. Fit Perfectly for Honda Civic 1988-1991 ED2 ED3 ED4 ED6 ED7 EC8 EE9 for Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9 for Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1 for Honda CRX 1988-1991 ED8 ED9 EE8 for Honda Delsol 1992-1995 EG1 for Acura Integra 1990 -1993 DA DBfor Acura Integra 1994-2001 DC2 DC4 Rear fork Type Bracket Model Only. Spring rate Front 8kgmm 448 lbsin, Rear 5 kgmm 280 lbsin, coil spring with upgraded material and continuously stress test to improve performance and reduce spring distortion. 24 Levels Adjustable Damper for More Control Level 0-8 suggest for street useLevel 9-16 suggest for mountain useLevel 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs. Adjustable Height Thread-type ride height adjustment for 1-3 inchesdoes not keep the original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.

Fitment for Toyota Corolla E90 1987-1992 for Toyota Corolla E100 19911998 for Toyota Corolla E110 1995-2002 for Toyota Corolla AE92 1987-1991 for Toyota Corolla AE101 1992-1998 for Toyota Corolla AE111 1988-2002. High Tensile Spring Front Spring rate 8 kgmm 448 lbsin Rear Spring rate 6 kgmm 336 lbsin with spring preload 7-10 mm. High Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04. Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.NOTE DOES NOT keep to original ride height. Factory Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

Fitment for Honda Civic Si VIII 2-door coupe FG1FG2 2006-2011 for Honda Civic Si VIII 4-door sedan FA1FA2FA3FA4FA5 for Honda Civic Si VIII 4-door sedan FD1FD2FD3FD4FD6FD7 006-2011 for Acura CSX 4-door sedan Canada 2006-2011. Street Performance T6 Series Suitable for street performance driving, upgraded damper knob easier to adjust, high-quality damping oil with better viscosity, upgraded full aluminum plates. Achieve the balance between comfort, speed and safety. 24 Levels Adjustable Damper for More Control Level 0-8 suggest for street useLevel 9-16 suggest for mountain useLevel 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs. Adjustable Height Thread-type ride height adjustment for 1-3 inchesdoes not keep the original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. High Tensile Spring Front 7 kgmm392 lbsin, Rear 6 kgmm 336 lbsin, The springs are made from race grade 55CrSi spring steel and with continuously stress test to ensure supreme strength and reliability.

Compatibility- Evil Energy coilovers are compatible for Mazda Miata MX5 NA NB 1.6L,1.8L 1989-2005 for Mazda Miata Base Convertible 2D 1990-2005exclude 1998 for Mazda Miata SE Convertible 2D 2000-2003 for Mazda Miata LE Convertible 2D 1993 for Mazda Miata M Edition Convertible 2D 1994-1997 for Mazda Miata STO Convertible 2D 1997 for Mazda Miata 10th Anniversary Convertible 2D 1999 for Mazda Miata LS Convertible 2D 2000-2005.. 1 - 3 inches Height Adjustable- The coil suspension kit reduces the chassis height of the car, allowing you to have a more aggressive stance, which helps eliminate turning noise and improve steering feel and response, enhancing its handling, stability and performance.. Extremely Durable Coil Spring- Heat-treated high-strength steel spring with anti-corrosion coating features extraordinary elasticity and durability. Spring Fatigue Life 60,000 Cycles. Front Spring Rate 7kgmm392 lbsin. Rear Spring Rate 6kgmm336 lbsin. Front Spring Length 180mm Rear Spring Length 162mm. Twin-Tube Structure- Compared to mono-tube structures, twin-tube ones minimize friction to attain sufficient strokes with less effort, and is more stable during driving on undulating roads, and more comfortable for long-term driving.. Premium Materials for Superior Quality- The steel body ensures the overall strength and durability. The plate top mount, spring, lower mount, piston rod which are all steel, can maintain a powerful abrasion performance during movement. High quality precision parts, worry-free installation. .

Compatibility- Evil Energy coilovers are compatible for Volkswagen Golf MK4 1J1 FWD 1998-2007, for Volkswagen New Beetle 9C1, 1C1 FWD 1998-2010, SEAT LEON 1M1 FWD 1999-2006, and for Volkswagen Jetta MK4 1J9M1999-2005 Will not fit 4-MOTION Volkswagen Golf MK4 R32 Audi quattro models. Please verify your vehicle fitment before purchasing. Professional installation is highly recommended.. 1 - 3 inches Height Adjustable- The coil suspension kit reduces the chassis height of the car, allowing you to have a more aggressive stance, which helps eliminate turning noise and improve steering feel and response, enhancing its handling, stability and performance.. Extremely Durable Coil Spring- Heat-treated high-strength steel spring with anti-corrosion coating features extraordinary elasticity and durability. Spring Fatigue Life 60,000 Cycles. Front Spring Rate 8kgmm448 lbsin. Rear Spring Rate 6kgmm 336 lbsin. Front Spring Length 185mm Rear Spring Length 162mm.. Twin-Tube Structure- Compared to mono-tube structures, twin-tube ones minimize friction to attain sufficient strokes with less effort, and is more stable during driving on undulating roads, and more comfortable for long-term driving.. Premium Materials for Superior Quality- The steel body ensures the overall strength and durability. The camber plate top mount, spring, lower mount, piston rod which are all steel, can maintain a powerful abrasion performance during movement. High quality precision parts, worry-free installation..

ApplicationFor BMW 3 E46 4-door sedan 330i 325i 328i 318d 320d 320i,325i 330d 021998-042005 For BMW 3 2-door Convertible E46 330ci 325ci323ci 320cd,330cd 042000-122007 For BMW 3 2-door Coupe E46 320ci 325ci 330ci320cd 330cd 021999-122006 For BMW 3 Touring 5-door wagonestate E46 316i 325i 328i 330i 323i 325i 318d 320d 330d 101999-052005 Note not for Xixd 4 wheel drive. Street Performance T6 Series Suitable for street performance driving, upgraded damper knob easier to adjust, high-quality damping oil with better viscosity, upgraded full aluminum plates. Achieve the balance between comfort, speed and safety. 24 Levels Adjustable Damper for More Control Level 0-8 suggest for street useLevel 9-16 suggest for mountain useLevel 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs. High Tensile Spring Front 8 kgmm 448 lbsin Rear 7 kgmm 392 inlbs. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance.. Adjustable Height The height is adjustable for 1-3 inchesdoes not keep the original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.

Fit Perfectly for BMW 3 E46 021998-042005 4-door sedan 318i 330i 325i 328i 318d 320d 320i,325i 330d For BMW 3 2-door Convertible E46 2000.04-2007 318i 330ci 325ci323ci 320cd,330cd for BMW 3 2-door Coupe E46 1999.02-2006 318i 320ci 325ci 330ci320cd 330cd for BMW 3 Touring 5-door wagonestate E46 1999.10-2005.05 316i 318i 325i 328i 330i 323i 325i 318d 320d 330d. High Tensile SpringFront 8 kgmm 448 lbsin Rear 7 kgmm 392 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Lower HeightThe ride height is adjustable for 1-3 inchesnot keep to original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Fit Perfectly for Honda civic VII DXEXGXHXLXSi Coupe EM2 2001-2005 for Honda civic VII DXEXGXHXLXSi Sedan ES, ET 2001-2005. NOTE not fit for Hybrid. High Tensile SpringFront 10 kgmm 560 lbsin Rear 6 kgmm 336 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Lower HeightThe ride height is adjustable for 1-3 inchesnot keep to original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. Factory Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Fit Perfectly For Honda Civic 1989-1991 ED2 ED3 ED4 ED6 ED7 EC8 EE9 For Honda Civic 1992-1995 EG1 EG2 EG3 EG4 EG5 EG6 EG8 EG9 EJ1 EJ2 EH2 EH3 EH9 For Honda Civic 1995-2000 EK2 EK3 EK4 EJ6 EJ7 EJ8 EM1 For Honda CRX 1989-1991 ED8 ED9 EE8 For Honda Delsol 1993-1997 EG1 For Acura Integra 1994-2001 DC2 DC4 Rear Fork Type Bracket Model Only. 24 Rebound Force Levels Level 0-8 suggest for street useLevel 9-16 suggest for mountain anfractuosities useLevel 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs.. Spring Rate Front Spring rate 8 kgmm 448 lbsin 5 kgmm 280 lbsin with spring preload 7-10 mm. Spring length Front 180mm Spring length Rear 180mm Coilover overall length Front 365mm-410mm Coilover overall length Rear 435mm-480m. Adjustable Height The height is adjustable for 1-3 inchesNotice The coilovers kit will Lower your car and does not keep to the original ride height., allowing you to have a more aggressive stance, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response. In addition, we have adopted a deep groove ball bearing structure to help eliminate cornering noise and also improve steering feel and response.. Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction and ensuring sufficient travel with less effort..

Fit Perfectlyfor Honda Civic VII DXEXGXHXLXSi Coupe EM2 2001-2005 for Honda Civic VII DXEXGXHXLXSi Sedan ES, ET 2001-2005. Note not fit for Hybrid. Street Performance T6 Series Suitable for street performance driving, upgraded damper knob easier to adjust, high-quality damping oil with better viscosity, upgraded full aluminum plates. Achieve the balance between comfort, speed and safety. 24 Levels Adjustable Damper for More Control Level 0-8 suggest for street useLevel 9-16 suggest for mountain useLevel 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs. High Tensile Spring Spring rate Front 10 kgmm 560 lbsin Spring rate Rear 6 kgmm 336 lbsin with spring preload 7-10 mm. High tensile performance spring - stress tested over 600,000 times while the spring distortion is less than 0.04. Adjustable Height Thread-type ride height adjustment for 1-3 inchesdoes not keep the original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.

Fitment for Nissan 350Z Coupe RWD 2003-2008 Z33 for Nissan 350Z Roadster Convertible RWD 2003-2008 Z33 for Nissan Skyline Coupe RWD 2003-2007V35 for Infiniti G35 Coupe RWD 2003-2007 V35for Infiniti G35 Sedan RWD 2003-2006 V35. High Tensile SpringFront 10 kgmm 560 lbsin Rear 7 kgmm 392 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance.. Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance.This design helps eliminate turning noise and also improves steering feel and response.NOTE DOES NOT keep to original ride height.. Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

Compatibility- Evil Energy coilovers are compatible for Honda Civic EJEKEMEN 1996 1997 1998 1999 2000. Please verify your vehicle fitment before purchasing. Professional installation is highly recommended.. 1 - 3 inches Height Adjustable- The coil suspension kit reduces the chassis height of the car, allowing you to have a more aggressive stance, which helps eliminate turning noise and improve steering feel and response, enhancing its handling, stability and performance.. Extremely Durable Coil Spring- Heat-treated high-strength steel spring with anti-corrosion coating features extraordinary elasticity and durability. Spring Fatigue Life 60,000 Cycles. Front Spring Rate 9.8kgmm549 lbsin. Rear Spring Rate 5kgmm280 lbsin. Front Spring Length 180mm Rear Spring Length 234mm.. Twin-Tube Structure- Compared to mono-tube structures, twin-tube ones minimize friction to attain sufficient strokes with less effort, and is more stable during driving on undulating roads, and more comfortable for long-term driving.. Premium Materials for Superior Quality- The steel body ensures the overall strength and durability. The plate top mount, spring, lower mount, piston rod which are all steel, can maintain a powerful abrasion performance during movement. High quality precision parts, worry-free installation. .

Compatibility- Evil Energy coilovers are compatible for Honda Civic VII DXEXGXHXLXSi Coupe EM2 2001-2005, for Honda Civic VII DXEXGXHXLXSi Sedan ES, ET 102000-042006. NOTE not fit for Hybrid. Please verify your vehicle fitment before purchasing. Professional installation is highly recommended.. Twin-Tube Structure- Compared to mono-tube structures, twin-tube ones minimize friction to attain sufficient strokes with less effort, and is more stable during driving on undulating roads, and more comfortable for long-term driving.. Extremely Durable Coil Spring- Heat-treated high-strength steel spring with anti-corrosion coating features extraordinary elasticity and durability. Spring Fatigue Life 60,000 Cycles. Front Spring Rate 10kgmm560 lbsin. Rear Spring Rate 7kgmm392 lbsin. Front Spring Length 220mm Rear Spring Length 140mm.. 1 - 3 inches Height Adjustable- The coil suspension kit reduces the chassis height of the car, allowing you to have a more aggressive stance, which helps eliminate turning noise and improve steering feel and response, enhancing its handling, stability and performance.. Premium Materials for Superior Quality- The steel body ensures the overall strength and durability. The plate top mount, spring, lower mount, piston rod which are all steel, can maintain a powerful abrasion performance during movement. High quality precision parts, worry-free installation..

Adjustable coil over shock brackets similar to Competition Engineering 2047 or Jegs 64080.These top quality CNC Laser cut brackets give you a minimum of 6 of height adjustment in your coil overs.. Shock Mount Location Rear lower. Shock Mount Type Coil-over shock. Shock Mounting Bracket Finish Natural. Axle Tube Diameter 3 inch. Adjustable Mounting Bracket. Allows 6 of height adjustmnet. Fits most popular coil-over shocks. Welding Required. Sold as a kit,Kit mounts two shocks. Package Included 2x weld on housing brackets for 3 dia axle tubes 4x 316 thick L-brackets for shocks Bolt kit for shocks and brackets.

Fit Perfectly for Chevrolet Camaro All Models 2010-2015, excluding MagneRide Suspension. Note rear spring installation diameter100 mm 3.94. High Tensile SpringFront 8 kgmm 448 lbsin Rear 13 kgmm 728 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Lower HeightThe ride height is adjustable for 1-3 inchesnot keep to original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. Factory Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Package Include Coilovers assembly 2 front and 2 rear notefront and rear OE top mounts required a pair wrench for height adjustment, include professional installation.

COMPATIBLE For Honda Civic 4th Gen Rear Fork EFED 1988-1991 For Honda Civic 5th GenRear Fork EG6EH 1992-1995 For Honda Civic 6th GenRear Fork EKEMDC2EJ 1996-2000 For Honda CR-X 2nd Gen Rear Fork ED8ED9 1988-1991 For Honda Del Sol EG 1993-1997 For Acura Integra 2nd Gen DA5-DA9, DB1-DB2 1990-1993 For Acura Integra 3rd Gen Rear Fork excludes Type R DBDC 1994-2001. SPRING RATE Front10 kgmm560 lbsinch, Rear 8 kgmm448 lbsinch, Spring Preload 7-10mm And Spring Length Front 180mm Spring Length Rear 180mm. DUST COVERHigh performance dust cover, which can effectively prevent the erosion of dust and flying stones. Extend the life of the coiovers. HIGH PERFORMANCE SHOCK OIL Guaranteed to maintain stable viscosity characteristics from low temperature to high temperature, ensuring smooth piston movement. It can be quickly defoamed without mixing of oil and gas. High-intensity driving is possible even in hot temperature. PACKAGE AND SERVICE 2 pieces Front Coliovers 2 pieces Rear Coilovers 2 pieces wrench 2 Years manufacturer's warranty 7-day satisfaction guarantee.

Exact Fitment for Target Models Specifically engineered to fit Compatible with Honda Accord VII series 2003-2007 4-door sedans model codes CM4CM5CM6 and 2-door coupes model codes CM7CM8. Each unit is tested for fitment accuracy before leaving the factory, ensuring seamless alignment with your vehicles original mounting points. Please verify your vehicles make, model, and production year to confirm compatibility.. Adjustable Height Aggressive Stance Offers 1-3 inches of precise height adjustability, letting you customize your Compatible with Honda Accord 2003-2007s stance to match your style. This design not only minimizes unwanted turning vibrations and noise but also sharpens steering response and improves overall handling feel. IMPORTANT Does not retain the original factory ride heightplease confirm your desired lowering range before purchase.. Premium Durable Materials Constructed with aviation-grade 6061-T6 aluminum alloy, which delivers 30 higher hardness than standard aluminum, ensuring long-term structural stability. All precision-machined components undergo strict quality checks, with treatment to block corrosion that stops rust and reduces wear even in harsh driving conditions e.g., rain, road salt. Fully pre-assembled for safe, hassle-free installation.. High-Performance Tensile Spring Equipped with high-tensile steel springs front stiffness rated at 10 kgmm 560 lbsin, rear at 6 kgmm 336 lbsin. Successfully passed over 600,000 continuous fatigue cycle testsfar exceeding industry standards for durabilitywith spring distortion kept below 0.04 to maintain consistent performance. Specialized surface treatment further enhances wear reduction and extends the spring's service life.. Complete Package Installation Support Package includes 2 front coilovers assemblies, 2 rear coilovers assemblies, 1 set of two height-adjustment wrenches custom-sized for easy operation, and a step-by-step professional installation manual with clear diagrams. No additional hardware is requiredall necessary parts are included to streamline the installation process, even for intermediate DIY users..

Fitment for Toyota Camry 2007 - 2011 All Models Notice will not fit Hybrid Models for Lexus ES350 2007 - 2009 All Models for Toyota Avalon 2006 Built After 1205 Production Date for Toyota Avalon 2007 - 2011 All Models. Spring Rate Front Spring rate 12 kgmm 672 lbsin Rear Spring rate 9 kgmm 504 lbsin with spring preload 7-10 mm. Hi Tensile performance spring - Under 600,000 times continuously test, the spring distortion is less than 0.04. Lowering Kits The height adjustable by 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.NOTE DOES NOT keep to original ride height.. Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

Compatibility Fits 2004-2004 Ford F-150 2005-2008 Ford F-150 2008-2008 Ford F-150 2009-2014 Ford F-150 2006-2008 Lincoln Mark LT. Reduces Sag Load This rear shock absorber uses a coil spring to help reduce sagging when loaded up to 1,200 lbs for enhanced control and stability during demanding conditions. Exceptional Shock Absorber Replacements Tuned for each application, the full-displaced valving in this truck shock assembly automatically adjusts to road extremes for consistent ride quality. Long-Lasting Performance The self-lubricating fluid seal and nitrocarburized rod in this auto repair replacement help minimize friction and premature wear for a longer service life. About DRiV We are driven to deliver the automotive products and services our global customers want.

Precise CompatibilityCompatible with Honda Civic VII DXEXGXHXLXSi Coupe EM2 2001-2005 Compatible with Honda Civic VII DXEXGXHXLXSi Sedan ES, ET 2001-2005. REMINDER Not suitable for Hybrid models. Adjustable Ride HeightOffers 1-3 inches of ride height adjustment does not retain original ride height, helping you achieve a more dynamic and aggressive vehicle stance. This design effectively reduces turning noise while enhancing steering feedback and responsiveness. Original Factory Damping SettingDelivers consistent and predictable handling performance, minimizing the risk of excessive load on the suspension system and extending its service life. High Tensile Strength SpringFront spring stiffness 10kgmm 560 lbsin Rear spring stiffness 6kgmm 336 lbsin. After over 600,000 continuous durability tests, the spring distortion rate is less than 0.04. Additionally, a special surface treatment process is applied to enhance durability and overall performance. Premium Material SelectionCrafted with 6061 aluminum alloy featuring T6 heat treatment for improved hardness. Equipped with high-quality precision components, it boasts excellent strength and durability, and remains safe for installation even under full-load conditions.

Application Lowering Height Compatible for Acura CSX 2006-2011 Compatible for Civic FD1FD2FD3FD4FD6FD7 Compatible for Honda Civic 2006-2011 FG1FG2, only North America Compatible for Civic FN1FN2FN3FN4 4D sedan FA1FA2FA3FA4FA5, only North America These Coilovers Strut will Lowering the vehicle height around 1 to 3 and WON'T keep to Original Ride Height.. Spring Rate Front Spring 7 kgmm 392 lbsin Rear Spring 10 kgmm 560 lbsinNon-Adjustable Damper 20MM Rod with full dust cover can protect the damper and extended service life.. Package Include 2x Front Coilovers 2x Rear Coilovers 2 Stainless Steel Wrenches. Installation Included, highly recommend professional installation.. Material Utilizing 6063 aluminum with T6 treatment enhances hardness and provides outstanding strength. The incorporation of aluminum not only ensures durability but also contributes to weight down. Prior to purchasing, it's advisable to verify compatibility with your car.. Stability Enhancement The twin-tube design, with its extended stroke and superior height adjustability compared to mono-tube construction, enhances driving comfort. By minimizing pressure, noise, and bumps during driving, it promotes a smoother and more stable driving experience..

Constant rate front coil springs can help improve stability and maintain ride height. Variable rate rear coil springs provide 500 lbs per pair of load capacity. Not to exceed vehicle GVWR Gross Vehicle Weight Rating. Product does not increase payload.. Seamless Drawn-Over-Mandrel DOM tubing decreases internal component wear, resulting in longer service life. Greater heat dissipation, improved cooling and reduction in fade for continued performance. Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life. Real-world tested to ensure that the shocks will fit intended vehicles and applications. Fits 2007-2007 GMC Sierra 1500 Classic,2007-2007 Chevrolet Silverado 1500 Classic,1999-2018 GMC Sierra 1500,1999-2018 Chevrolet Silverado 1500,1994-2002 Dodge Ram 3500,1994-2002 Dodge Ram 2500,1994-2001 Dodge Ram 1500.

COMPATIBILITY Fits 2012-2015 Ram CV 2008-2016 Chrysler Town Country 2015-2015 Chrysler Town Country 2008-2020 Dodge Grand Caravan 2009-2014 Volkswagen Routan. GET THE RIGHT PART -- Before purchasing, please check the Amazon Confirmed Fit bar to ensure this part will fit your vehicle enter all vehicle information year, make, model, engine and trim for compatibility and check qualifier notes. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase. REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. capacity limited by suspension, tires and transmission see owner's manual. EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency. CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces. LONGER SERVICE LIFE -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life. IMPROVES PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade.

Performance Tuned For Vehicle Specific Application. Aluminum Body Dissipates Heat Faster Than Steel. IFP Separates Oil From High-Pressure Nitrogen Gas. Black Anodized CNC Machined Aluminum Components.

Fitment Compatible for 2004-2008 Acura TSX Base Sedan 4D 2.4L Compatible for 2003-2007 Honda Accord VII 4D Sedan CM4CM5CM6, 2D Coupe CM7CM8 Compatible for 2003-2007 Honda Inspire Japan Only. Spring Rate Front 10kgmm560 inlbs Rear 5kgmm280 inlbs High Tensile Performance Spring under over 600,000 continuous tests, spring deformation less than 0.04. In addition, special surface treatment is applied to enhance durability and performance.. Package Contains One Set Lowering Coilovers Non Adjustable Damper 2 x Stainless Steel Wrenches. Installation Included, highly recommend professional installation. Height Lowering AUTOSTARSHIP coilovers will Lowering the car height for 5-10cm Both front and rear, WILL NOT STAY IN Original Ride Height to achieve a more aggressive stance, enhancing your sense of happiness during your journey.. Premium Material Made from 6063 aluminum with T6 for increased hardness, excellent strength and aluminum helps to keep the weight down and bring a more comfortable driving experience..

Compatibility Fits Chevrolet Silverado 1500 20072023 including 1500 LD 2019 and 1500 LTD 2022 and GMC Sierra 1500 20072023 including Sierra 1500 Limited 2019 and 2022. Heavy-Duty Dependable This Monroe Suspension Shock Absorber and Coil Spring Assembly helps maintain vehicle control for trucks that tow or carry loads. Enhanced Ride Height Support Reduces sag load and promotes road stability even when carrying up to 1,200 lbs, with heavy-gauge coil springs and a self-lubricating fluid seal. Automatic Road Adjustment This vehicle suspension part features full-displaced valving that automatically adjusts to road, ensuring responsive, smooth ride control. About DRiV We are driven to deliver the automotive products and services our global customers want.

Combines shock and spring technology, economical solution for heavier duty use. Constant-rate front coil springs can help improve stability and restore or maintain ride height. Variable-rate rear coil springs provide 500 lbs. per pair of load capacity Not to exceed vehicle GVWR Gross Vehicle Weight Rating. Product does not increase payload. An economical solution for heavier duty use,. Rear Chevrolet 1999 - 18 Silverado 1500, 2007 Silverado 1500 Classic Dodge 1994 - 01 Ram 1500, 1994 - 02 Ram 2500, 1994 - 02 Ram 3500. Rear GMC 1999 - 18 Sierra, 2007 Sierra 1500 Classic. Shock Extended Length 24.24 in. 615.7 mm. Shock Collapsed Length 14.88 in. 377.95 mm. Length of Stroke 9.36 in 237.74 mm..

Fit Perfectly For Subaru Impreza WRX 2000.08-2007.06 GDA GD9 GGA For Subaru Impreza WRX STI 2000.10-2004.06 GDB RIM P.C.D.100 For Subaru Forester SG 2003-2008For SAAB 9-2X 2005-2007 GGA GGE. 24 Rebound Force Levels for More Control Level 0-8 suggest for street useLevel 9-16 suggest for mountain anfractuosities useLevel 17-24 suggest for race tracks use. You can adjust it at any time to suit your needs. High Tensile Spring Front 9 kgmm504 lbsin Rear 7 kgmm392 lbsin, Spring Preload 7-10 mm with pillow ball top mounts and adjustable camber plate. Under 600,000 times continuously test, the spring distortion is less than 0.04. Lower Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance, This design helps eliminate turning noise and also improves steering feel and response.NOTE DOES NOT keep to Original Ride Height. Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints.

Fit Perfectly for Ford Mustang Base SN95 ConvertibleCoupe 1994-2004 for Ford Mustang GT SN95 ConvertibleCoupe 1994-2004. High Tensile SpringFront 8 kgmm 448 lbsin Rear 7 kgmm 392 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Lower HeightThe ride height is adjustable for 1-3 inchesnot keep to original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. Factory Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Applicationfor Honda Civic 2-door Coupe FG1FG2 2006-2011 for Honda Civic 4-door Sedan 2006-2011 FA1FA2FA3FA4FA5 FD1FD2FD3FD4FD6FD7 for Acura CSX 4-door Sedan Canada 2006-2011. Note not for the Mugen trim level. High Tensile Spring Front 7 kgmm 392 inlbs Rear 6 kgmm 336 inlbs. Under 600,000 times continuously test, the spring distortion is less than 0.04. Lower Height The height is adjustable for 1-3 inches, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response.NOTE DOES NOT keep to Original Ride Height.. Twin-tube Structure Compared to mono-tube construction, the twin-tube has longer stroke and higher height adjustability, and they will give you a more comfortable riding experience by reducing the pressure on the joints and also minimizing friction. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation..

Fit Perfectly for Nissan 350Z CoupeRoadster Convertible RWD 2003-2008 Z33 for Infiniti G35 Coupe RWD 2003-2007 V35 for Infiniti G35 Sedan RWD 2003-2006 V35 for Nissan Skyline Coupe RWD 2003-2007V35. Note Not for AWD models.. Lower HeightThe ride height is adjustable for 1-3 inchesnot keep to original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. High Tensile SpringFront 10kgmm 560 lbsin Rear 7kgmm 392 lbsin.. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Fit Perfectlyfor Toyota Corolla E140 AZE141L XRS 2009-2010 for Toyota Corolla E140E160 ZRE142L LE 2009-2013 for Toyota Corolla E150E170 ZRE172L all 2014-2019 for Toyota Matrix E140 LE 2009-2014. High Tensile SpringFront 7 kgmm 392 lbsin Rear 6 kgmm 336 lbsin. Under 600,000 times continuously test, the spring distortion is less than 0.04. Plus, the special surface treatment is to improve the durability and performance. Lower HeightThe ride height is adjustable for 1-3 inchesnot keep to original ride height, allowing you to have a more aggressive stance. This design helps eliminate turning noise and also improves steering feel and response. Factory Preset Damping ValueMaintain consistent and predictable handling characteristics, reduce the risk of overloading the suspension system. Excellent MaterialThe product comes with 6061 aluminum alloy with T6 for increased hardness, high quality precision parts, high strength and durability. It is fully loaded and safe for installation.

Item Package Dimension 18.0L x 9.0W x 9.0H inches. Item Package Weight - 25.0 Pounds. Item Package Quantity - 1. Product Type - SHOCK ABSORBER.

Forged Shortened Threaded Shock Body. Super-Finished Hard Chrome Shaft. Reduced Shaft Stroke for Full Travel on Lowered Vehicles. Fixed Dampening. Ride Hight Adjustable. Independant Spring Pre-Load. Billet Top Hats. Polyurethane Bushing for Improved Shock Feedback.

COILOVERS COMPATIBILITY Coilovers Suspension Shocks Springs Struts Full Set Fit For for Chrysler for 300 11 12 13 14 15 16 17 18 19 20 21 22, for Dodge for Charger 11 12 13 14 15 16 17 18 19 20 21 22, for Dodge for Challenger 11 12 13 14 15 16 17 18 19 20 21 22. PRODUCT INTRODUCTION There are 2pieces front coilovers struts and 2pieces rear coilovers struts in product list, and equipped with installation tools. FUNCTION Adjustable body height allows the driver to lower the vehicle's center of gravity. This reduces the body roll during turns and pitch during acceleration and braking, enabling more agile handling and steering, making the ride more comfortable. MATERIAL Coilover Suspensions Shock Struts Kits are made of durable material, coil spring with upgraded material, the upgraded spiral spring is sturdy and durable, which can improve performance and reduce spring deformation. NOTE Please select your vehicle yearmakemodeltrim in the top left corner of the page to confirm compatibility or refer to the vehicle information in the description.

DURABLE CONSTRUCTION - CNC precision machined aircraft alluminum sleeves and high strength cold wound springs powder-coated ensures the strength and durability. Dual locking perches, can be used with any brand of shockes.. HIGH PERFORMANCE - 1 - 4 ride height adjustable with scales, which make easy and professional adjustment possible with added bushings and increased spring rate. The perfect ride height can be adjusted with any rim and tire combinations.. REASONABLE DESIGN - Designed to be used with stock or aftermarket shocks. These coil over sleeves enable you to upgrade your shocks and springs in different stages. Tamping adjustment allows you to control the ride quality.. SAFETY - It promises the car owner's ability to adjust the ride height depending on weather conditions. By rising the coilovers to gain more clearance during winter can reduce the likelihood of snow and ice contacting the undercarriage causing damage.. FITMENT - Compatible with 88-91 Honda CRX, compatible with 90-01 Acura Integra, compatible with 88-00 Honda Civic, compatible with 93-97 Honda Del Sol. Fits Shocks up to 50mm OD Diameter..

Stud Type on the Top 1966-1979 Beetle, Super Beetle 12.5 - 18. For Ball Joint Front End. Coil Spring is heated treated powder coated to ensure longevity and protection from Corrosion.. Spring seats insulated to springs to ensure quiet and comfortable ride quality.. Neoprene boots and bump stops when applicable.. Limited Lifetime Warranty.

Part Number 985-02-018. Front Pair of Struts Springs for vehicles at factory height or w0-2 front lift These parts fit models with front struts only and will not fit Classic SilveradoSierra 1500 models. Excludes HD Models. wFactory Aluminum Arms. Fits 2WD 4WD vehicles. Coilover lift height is achieved by adjustable preload ring from factory height up to 2 of lift. Coilovers come preset at 2 of lift.. Fox's limited one 1 year warranty protects against defects and premature failure..

Compatible With Toyota Celica T230 2000 2001 2002 2003 2004 2005 2006. Spring Rate FrontRear 5 kgmm 280 lbsinch 4 kgmm 224 lbsinch Damping Levels 16 Rebound Force Levels. 52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track. Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke Powder Coated CNC Machined Aluminum And Carbon Steel Accessories Independent Spring Tension And Height Adjustment Racing Grade Shock Oil With High Viscosity Index Shock Absorber Can Be Rebuild When Worn Out. Full 1 Year Limited Warranty From Date Of Purchase Install By Experienced Professionals Is Highly Recommended.

Compatible With BMW 3-Series RWD E30 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 Requires To Weld OE Spindle Onto Front Lower Bracket 51mm Outer Strut Diameter. Spring Rate FrontRear 8 kgmm10 kgmm Damping Levels 16 Rebound Force Levels. 52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track. Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke Powder Coated CNC Machined Aluminum And Carbon Steel Accessories Independent Spring Tension And Height Adjustment Racing Grade Shock Oil With High Viscosity Index Shock Absorber Can Be Rebuild When Worn Out. Full 1 Year Limited Warranty From Date Of Purchase Install By Experienced Professionals Is Highly Recommended.

Application Compatible for Honda Civic 1996-2000 EK2 EK3 EK4 EK5 EK6 EK7 EK8 EK9 EJ6 EJ7 EJ8 EJ9 EM1 Compatible for acura integra 1986-1989 need spacer Compatible for Honda Civic Del Sol 1993-1997. NOTE These Coilovers Strut will Lowering your car and DOES NOT keep to Original Ride Height.. Feature Spring Rate Front 8kgmm Rear6kgmm 20MM Rod with full dust cover will protect the damper and prolong usage time.. Adjustable Height Yes45 Adjustable Camber plates top mountsYes Damper Non adjustable damping Adjustable Tension Yes. Please check your car information before purchase. Installation Included, professional installation is highly recommended.

Application Compatible for 1988-1999 Toyota Corolla E90 E100 E110 AE92 AE101 AE111 Note NOT compatible with AE102 NOTE These Coilovers Strut will Lowering your car and DOES NOT keep to Original Ride Height.. Spring Rate Front 8kgmm Rear6kgmm 4 bolts in top mount is enough and more convenient to install. Customer can adjutst Height based on their own preference.. Adjustable Height Yes45 Adjustable Camber plates top mountsYes Damper Non adjustable damping Adjustable Tension Yes. Compatible for E90 E100 E110 AE92 AE101 AE111. Please check your car model in details before purchasing..

Compatible With Mitsubishi Lancer CXCY 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Excludes Evolution Models. Spring Rate Front - 6 kgmm 336 lbsinch Rear - 6 kgmm 336 lbsinch Damping Levels 16 Levels Top Mount Front - Yes, Standard Pillow Ball Rear - Yes, Standard Top Mount. Mono-Tube Shock Design With 16 Levels of Damping Force Adjustment. Sport Tuned Lowering Springs To Ensure Ride Improvement Drop Range From 1.5 to 2.5 inch Drop Affordable Pricing Performance Suspensions Upgrade Improve Overall Handling. No Install Instructions, Install By Experienced Professionals Is Recommended. Adjustment Requires..