EMOON Clock Replacement Kit Comes as 9 clock movements with 12 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. 9 Pack Clock Mechanism 3 pieces for each kind of shaft length.Total shaft length is 78 in, 34 in, 58 in, thread length is 34 in,12 in, 516 in, this clock motor kit fit clock dials from 0 to 12 in 12mm thick, can fit most of clock panels. 12 PACK CLOCK HANDS Including modern and retro classic clock hands, fit for clock face from 216 in diameter you can pick out the style and length of the hands that look best for clock replacement or DIY at no additional charge. Accurate Time-keeping and Sweep Movement Motor features High precision Clock Mechanism, ensures watchmaker's accuracy silent movement powered by a AA battery, easy hang up on the wall hook included. A Deluxe Combo for Clock Maker Lover One set include 9 pack clock hands, 12 pack clock mechanism for clock repair replacement or clock DIY, applicable to three-dimensional embroidery, craft clock, clock repairing, replacing or making a clock.

Sufficient quantity you will get 6 pieces repairing quartz clock movements in total, which is nice for mechanism replacements And the package also comes with 6 pieces diverse sets of clock hands, 6 pieces gaskets and 6 pieces hang hooks, a variety of styles to choose from, offering enough quantity to use and replace Suitable for different styles of clock frames, clock replacement or making your own customized clock project. Size details the delicate and colorful clock hands fit well for a diameter of 25 - 35 cm clock surface, while the total length of the shaft is about 20 mm 0.8 inches, and the thread length measures approximately 6 mm 0.24 inches Suitable for clock panels with a thickness of 1 - 3 mm 0.04 - 0.12 inches, so please check the size before installing with this clock accessories kit. Powered by battery the quartz DIY wall clock mobile mechanism is powered by AA batteries, which offers nice precision and equipped with sweeping motion At the same time, the clock movement mechanism can provide the watchmaker with accuracy and reliability, which will not produce annoying ticking sound, moreover, it will provide you with a quiet environment. Comfortable experience and decorative effect the clock movement mechanism are made of sturdy and durable ABS material while the clock hands are made of quality aluminum, lightweight and corrosion resistant, durable and practical so that they can be applied for a long time, providing you with a comfortable as well as quality usage experience and decorative effect. Wide range of usages these DIY quartz wall clock replacement movement parts are designed with 4 vivid colors, offering a nice opportunity for you to DIY your clock It is suitable for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, perfect for DIY quartz wall clock replacement movement parts, , enriching your life and could making a beautiful decorative clock for your home.

High torque clock movement with metal hook I shaft, drive long clock hands 10 mm to 450 mm, with 230 mm 9.1 inch long hand to fit dials up to 56 cm 22 inches in diameter. Clock mechanism size total shaft length is 23 mm 9 10 inches, thread length is 15.4 mm 3 5 inches Jump second movement, suitable for 9 - 13 mm 9 25 - 1 2 inches thickness clock panel. Size from the center of the hole to the tip the hour hand is approx. 175 mm 6.9 inches long The minute hand is about 230 mm 9.1 inches in length. Easy to install the clock movements kits is easy for installation Simple and elegant design, these replacement parts suit well to different styles of clock frame. Warm notice when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying.

Clock movement high torque clock movement with hook, long shaft, drive long clock hands 10 mm to 450 mm. Total shaft length 28 mm 1-1 10 inches, thread length 15.4 mm 3 5 inches, suitable for 9 - 13 mm 9 25 - 1 2 inches thickness clock panel. Size from the center of the hole to the tip the hour hand is approx. 203 mm 8.0 inches long The minute hand is about 305 mm 12 inches in length Note please check the size before buying. Good DIY clock supply suitable for repairing, replacing the broken parts of a clock or serving as good handwork materials to make a clock by yourself. Warm notice there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.

Two-Clock Mechanisms Size Short total shaft length 16 mm 0.63 in, thread length 8mm 0.315 in, suit for 3 - 6 mm thickness clock panel. Long Total sharft length 23 mm 0.9 in,thread length 15.4 mm 0.6 in,suitable for 9 - 13 mm thickness clock panel, These two clock movements can be used for almost any home wall clock.. Silent Clock Mechanism YOGINGO clock movement use ultra-silent Scanning Design, Sweep clock movement without any noise which can offer your sleep a silent environment. All of your requirements are met by a simple and elegant design.. MaterialPackage The clock hands are made of high-quality aluminum, which is lightweight and resistant to corrosion. Includes 2 clock movements in different sizes, 5 pairs of hours and minutes hands, 5 seconds hands and second cap, easy to install, and many options in one set.. Wide Application DIY quartz wall clock replacement movement parts, suitable for cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, suitable for repairing, replacing, or making a clock, and also suitable for various styles of the clock frame no battery. Warm Notice Please double-check the dimensions of this clock mechanism replacement movement before purchasing they are made of aluminum, and please do not apply excessive pressure to avoid bending them..

Quartz Long Shaft Clock MovementGood Handwork DIY Clock Replacement Movement Parts With Hook, Which Meet Your Installation Needs.. Clock Movement Sizeshaft length is 31 mm 1-1 5 inch Thread length is 24.6 mm 24 25 inchJump second movement, suitable for 16 - 21 mm 5 8 - 4 5 inch thickness clock panel.. Hole Center To The Tip Hand Sizethe hour hands are approx.70 mm 2.76 inch and 92 mm 3.62 inches respectively, minute hands are approx.100 mm 3.94 inches and 114 mm 4.5inches, the second hand is approx.104 mm 4.1 inches, second caps is approx.7 mm 0.28 inches.. Clock Hands Kitpackage includes 2 pieces of minute hands and 2 pieces of hour hands, 1 second hand and 1 second caps, easy for installationSimple and elegant design, these replacement parts suit well to different styles of clock frame.. Wide Applicationthey are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc..

Clock Movement Battery OperatedMade of material, and is durable. Powered AA battery not included.. Quartz Clock Replacement Part SizeApprox. 5. 6 x 5. 6 x 1. 6 cm 2. 2 x 2. 2 x 0. 6 inches.Note Please measure the shaft of you clock mechanism you need before buying.. DIY Wall Clock MechanismSuitable for repairing, replacing or making watches. Suitable for craft clock, cross stitch, three- dimensional embroidery, frameless painting clock, etc.. OccasionDIY clock mechanism replacement movement parts can be use for Frameless 3D wall clock.. Customer Providing a satisfactory experience is our top priority for customers. If the product does not meet your expectations, please feel free to send us a message via Contact Seller..

High torque movement high torque clock with hook and long shaft drive long clock hands 10 mm to 450 mm. Movement size 31 mm 1-15 inch Thread length 24.6 mm 2425 inch Jump second movement is suitable for 16 - 21 mm 58 - 45 inch thickness clock panel. Length from the center of the hole to the tip approx. 145.5 mm 5.7 inch Minute hand is approx. 207 mm 8.1 inch Second caps is approx. 7 mm 0.28 inch. Compatible clock applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, and so on Suitable for repairing, replacing or making a clock. Warm notice when you install them, please keep the hour hand and minute hand parallel And please do not use too much pressure to avoid bending them, and please check the size before buying.

DIY clock repair kit you will get 6 pieces of high torque long shaft clock movements with 8 different pairs of clock hands, along with 6 pieces brass washers and 6 pieces brass hex nuts, you are able to choose various styles according to your needs, you can also change or make your own clocks with different styles of clock frame. Size details the total shaft length is approx 16 mm 0.62 inch, and the thread length is approximately 6 mm 0.24 inch, movement is suitable for 9 - 13 mm 0.35 - 0.51 inches thickness of clock panel and the clock hands fit for a diameter of 25 - 35 cm clock surface Please check the size before buying in case of unfit situation. Clock design the design of the clock hands is simple and beautiful, with various styles, classic colors, and no fading The 8 styles have their own characteristics to meet your needs in different scenarios, which can provide the watchmaker with accuracy and reliability. Durable and work well the quartz DIY wall clock mobile mechanism has nice precision, which is equipped with sweeping motion, can give the watchmaker accuracy and reliability, will not produce annoying ticking sound Moreover, it will provide you with a quiet environment. Wide application this wall clock movement set has 8 pairs of clock hands in different styles and lengths for your choice needs, works well for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and can be applied as DIY quartz wall clock replacement movement parts.

Clock movement high torque clock movement with metal hook, long shaft, drive long clock hands 10 mm to 450 mm, fit dials up to 64 cm 25 inches in diameter. Length from the center hole to the tip the hour hand is approx. 170 mm 6.7 inches, the minute hand is approx. 395 mm 15.6 inch The color of the front and back of the clock hand is different, the front is black, the back is silver. Total shaft length 20 mm 4 5 inches Thread length 11.7 mm 9 20 inches Jump second movement, suitable for 4 - 8 mm 4 25 - 3 10 inches thickness clock panelSA0828 Shaft length 23 mm 9 10 inches, thread length is 15.4 mm 3 5 inches Jump second movement, suitable for 9 - 13 mm 9 25 - 1 2 inches thickness clock panel. Warm notice there are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent AA batteries are suitable. Wide applications appropriate to install in the cross-stitch, craft clock, frame-less draw clock, DIY wall clock, etc..

Nice DIY clock repair set you will get 6 pieces of high torque long shaft clock movements and 6 different pairs of hands, along with 6 pieces hooks and 6 pieces pasters, these replacement parts suit well to different styles of clock frame, which are good for repairing, replacing or making a clock by yourself There are more functions waiting you to find out. Size details the total shaft length is approx. 28 mm 1.10 inches, and the thread length is approx. 22 mm 0.86 inches Sweeping movement is suitable for 19 mm 0.74 inches thickness of clock panel Suitable size is for your easy use and storage. Accurate time keeping and quiet motor the long shaft clock mechanism will give you great accuracy and dependability, along with sweeping motion, without ticking nosie and will provide you with a quiet environment, you can use it with confidence and convenience. Various usages these clock repair replacement tools work well for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and can be applied as DIY quartz wall clock replacement movement parts. 6 Different styles of hands you will have 6 pairs of clock hands in different styles and length for your options, you can choose and match them according to actual demands, they are suitable for clock creations and repairs, also offer you a beautiful and decorative effect.

Clock quartz movements high torque jump second movement, drive long clock hands 10 mm to 450 mm. Movement size the total shaft length is 23 mm 9 10 inches, thread length is 15.2 mm 3 5 inches, suit for 9 - 13 mm 9 25 - 1 2 inches thickness clock panel. Center hole to the tip hand length hour hand is approx. 115 mm 4.5 inch Minute hand is approx. 175 mm 7.0 inch Second caps is approx. 7 mm 0.3 inch. Package detail includes the hardware and 2 clock hands in a cardboard box with instructions, make you DIY clock project easily. Warm notice when you install it, please keep the hour hand and minute hand parallel in case of bend them.

Quartz DIY Wall Clock Movement Mechanism For DIY quartz wall clock replacement movement part, applicable framless 3D Wall clock.. Quartz DIY Wall Clock Movement Mechanism Battery Operated Sweep Silent Movement Motor Hands Clock Repair Replacement Parts Accessories for Home Room. Quartz DIY Wall Clock Movement Mechanism Great for repairing, replacing or making a clock.. Quartz DIY Wall Clock Movement Mechanism Powered by 1 AA battery not included .. Quartz DIY Wall Clock Movement Mechanism Made of material, it is durable and long lasting use..

Long spindle quartz clock good handwork DIY clock replacement movement parts with hook, which meet your installation needs. Movement size total shaft length is 31 mm 1-1 5 inch Thread length is 24.6 mm 24 25 inch Jump second movement, suitable for 16 - 21 mm 5 8 - 4 5 inch thickness clock panel. Hand length total hour hand length is about 86 mm 3.4 inches Total minute hand length is about 116 mm 4.6 inches Second caps is about 7 mm 0.3 inches. Easy to install the clock movements kits installation is very easily Long spindle, delicate design and looks elegant, simple, replacement part suit well to different styles clock frame. Compatible clock applicable to cross-stitch, craft clock, frameless draw clock, three-dimensional embroidery, etc. Suitable for repairing, replacing or making a clock.

Clock parts kit high torque I shaft clock with metal hook, the shaft can drive long clock hands 10 mm to 450 mm, suitable for repairing, replacing or making a clock. SA0856 SA1036 SA1054 Clock mechanism size total shaft length is approx. 23 mm 9 10 inches, thread length is 15.4 mm 3 5 inches Jump second movement, suitable for 9 - 13 mm 9 25 - 1 2 inches thickness clock panelSA1026 SA1035 SA1053 Clock mechanism size total shaft length is 20 mm 4 5 inch, thread length is 11.7 mm 9 20 inch Jump second movement, suitable for 4 - 8 mm 4 25 - 3 10 inch thickness clock panel. Clock hands kit package includes 2 pieces of minute hands and 2 pieces of hour hands, easy for installation Simple and elegant design, these replacement parts suit well to different styles of clock frame. Hole center to the tip hand size the hour hands are approx. 90 mm 3.5 inch and 93 mm 3.7 inches respectively, minute hands are approx. 120 mm 4.7 inches and 127 mm 5.0 inches, the second hand is approx. 100 mm 3.9 inches, second heads is approx. 7 mm 0.28 inches. Warm note when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before purchase.

Package and install the package includes 2 pieces minute hands and 2 pieces hour hands, and the color includes black and gold, easy for installation Simple and elegant design, these replacement parts suit well to different styles of clock frame. Clock mechanism size high torque jump second movement, drive long clock hands 10 mm to 450 mm, total shaft length is 20 mm 0.79 inches, thread length is 11.7 mm 0.46 inches Jump second movement, suitable for 4 to 8 mm 0.16 to 0.31 inches thickness clock panel. Size from the center of the hole to the tip the golden hour hands is approx. 115 mm 4.5 inch and the black hour hands is approx. 154 mm 6.1 inches respectively, the golden minute hands is approx. 175 mm 7 inches and the black hour hands is approx. 208 mm 8.2 inches, 2 caps are approx. 7 mm 0.28 inches second cap. Wide application applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.. Warm notice when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before purchase, the back of hands color are silver.

Clock Movement Mechanism - Ultra silent Scanning Design, two different shaft length quartz movement for your choice. Sweep clock movemen without any noise which can offer your sleep a silent environment.. Two Clock Mechanism Size -Short total shaft length 16 mm 0.63 in, thread length 8mm 0.315 in, suit for 3 - 6 mmthickness clock panel. Long Total sharft length 23 mm 0.9 in,thread length 15.4 mm 0.6 in,suitable for 9 - 13 mm thickness clock panel.. DIY Wall Clock Repair Parts Kits Including 2 x different size clock movement,5 Pairs Hour Minute hands,3 xSecond hand and 2second caps, easy for installation,Multiple choices in one set.. Clock Hands SizeThe size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying.. Wide Application - DIY quartz wall clock replacement movement parts, suitable for repairing, replacing or making a clock,most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc..

High torque clock movement with metal hook I shaft, drive long clock hands 10 mm to 450 mm, with 230 mm 9.1 inch long hand to fit dials up to 56 cm 22 inches in diameter. Good for repairing, replacing or making a clock by yourself. The simple style clock movement can match to diverse colors, patterns, shapes clock panel, it will not stand out, good movement will work well.. Accurate time-keeping motorSize-total shaft length is 20 mm 4 5 inch, thread length is 11.7 mm 9 20 inches suitable for 4 - 8 mm 4 25 - 3 10 inch thickness clock panel Jump second movement, high torque motor available. Features high precision clock mechanism, which offers watchmaker's accuracy and dependability powered by a AA battery.. Size from the center of the hole to the tip the hour hand is approx. 175 mm 6.9 inches long The minute hand is about 230 mm 9.1 inches in length.. Compatible clock applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, and especially suitable for DIY quartz wall clock replacement movement parts, etc. INSTRUCTIONS - Included along with the movements.. Warm notice when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before buying..

Package contents 1 movement, 4 pairs of hands with different shapes, 1 Metal hooks, and some accessories.come with the specially designed protect box and instructions.. Youngtown manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.. Choose the right clock mechanismtotal shaft length is 13.5mm 1732 inch,thread length is 5.5mm 732 inch suitable for 1- 3 mm 364 -764 inch thickness clock panel.. Good DIY clock supply 0 pairs of hands with different shapes,perfect for clock face in different diameter.suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself.. Accurate Time-keeping Quiet Motor features Youngtown 12888 clock mechanism, which offers watchmaker's accuracy and dependability equipped with sweeping motion, no ticking powered by a AA battery..

Clock movement replacement high torque clock with 2 hooks, long shaft, drive long clock hands 10 mm to 450 mm.. Movement size Total shaft length is 23 mm 2932 inch, thread length is 12mm 1532 inch,suitable for 4 - 8 mm 5 32 - 516 inches thickness clock panel.. Size from the hole center to the tip the hour hand is approx. 203 mm 8.0 inches long The minute hand is about 305 mm 12 inches in length.. DIY clock supplies the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.. Warm notice when you install them, please keep the hour hand and minute hand parallel And please do not use too much pressure to avoid bending them..

Package information you will get 2 pieces of quartz clock movements 15 mm, 2 pieces of gasket tools, 2 pieces of metal hooks and 2 types of walnut wood clock hands in 2 colors, including black and wood color, only suitable for 24 inches clock. Product material our clock movement replacement kit is quality The clock hand is made of walnut wood, which is wear-resistant and scratch-resistant, so you can use them for a long time, and the movement is made of ABS material, which is also wear-resistance, oil-resistance, and impact-resistance. Size of the kit the high-torque long shaft clock movement is approx. 15mm 0.59 inch, and the thickness of the panel cannot exceed 12 mm 0.47inch The length of the hour hand is approx. 22cm8.6inch, and the minute hand is approx. 29cm11.4inch The clock hands can be installed on a clock which is 24 inch in diameter at least. Eye-catching design the replacement clock movement kit is chic but practical The clock hand has a retro look and the movement is simple, nicely matching with your clock, showing elegance and charm. Accurate and quiet replacement quartz clock movement is featured with high precision clock mechanism, really accurate and dependable, and it is equipped with sweeping motion, no ticking sound, so you do not need to worry about noise Also, it can be powered by a battery.

DIY clock repair kit you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself. Size the total shaft length is approx. 20 mm 0.8 inches, and the thread length is approx. 14.6 mm 0.57 inches Jump second movement is suitable for 9 - 13 mm 0.35 - 0.51 inches thickness of clock panel. Accurate time keeping and quiet motor the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment. Wide application these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts. 5 Different styles of hands this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.

DIY clock repair kit you will get 5 pieces of high torque long shaft clock movements mechanism with 5 different pairs of clock hands, these replacement parts suit well to different styles of clock frame, which are good for repairing, replacing or making a clock by yourself. Size details the total shaft length is approx. 20 mm 0.8 inches, and the thread length is approx. 11.0 mm 0.43 inches Jump second movement is suitable for 5 - 9 mm 0.2 - 0.35 inches thickness of clock panel Please note that small parts are included, keep away from children under 3 years old. Accurate time keeping and quiet motor the long shaft clock mechanism offers great accuracy and dependability Equipped with sweeping motion and no ticking, it will provide you with a quiet environment. Wide application these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and they are specially suitable to be applied as DIY quartz wall clock replacement movement parts. 5 Different styles of hands this clock kit comes with 5 pairs of clock hands in different styles and length for your options, so it is great for clock creations and repairs while providing a decorative effect.

Clock movement details high torque clock movement replacement with hook, long shaft, drive long clock hands 10 mm to 450 mm. Total shaft length 23 mm 1 10 inches, with thread length 11.7 mm 9 20 inches, jump second movement suits for 4-8 mm 4 25-3 10 inches thickness clock panel. Size from the hole center to the tip the hour hand is approx. 203 mm 8.0 inches long The minute hand is about 305 mm 12 inches in length Please check the size of your item before buying. Package contents 1 clock movement with hook, 2 hands and some mounting hardware, coming with specially designed cardboard box and instructions. Warm notice there are some clock parts made of aluminum, please do not install them with too much pressure, otherwise they will be bent.

Eye-Catching Design Looking for a clock movement mechanism that fits your needs and your decor Look no further than our Quartz DIY Wall Clock Movement Our wall clock mechanism kits are well designed, and look quite charming, which can a stylish accent to your home decor. repairing, replacing or making a clock. For DIY quartz wall clock replacement movement part, applicable frameless 3D Wall clock.. Premium Quality Exquisite workmanship makes our wall clock mechanism , durable, safe to use. Our Quartz DIY Wall Clock Movement boasts an ideal size of about 5.6 x 5.6 x 1.6cm2.2 x 2.2 x 0.6inch, ensuring a for your clock. repairing, replacing or making a clock. Powered by 1 AA batterynot included.. WIDE APPLICATIONS Our Clock Movement is ideal for different DIY projects like cross-stitch, 3D embroidery, craft clocks, and frameless wall clocks. Whether youre going for a modern edge or rustic vibe, our stylish clock movement can blently perfectly for any design aesthetic. A perfect clock movement replacement for DIY quartz wall clocks. F. Ease to Use Installing our clock movement is easy and . Featuring a simple and elegant design, our wall clock movement suits different clock frame styles. Lets upgrade your clock mechanism with our Quartz DIY Wall Clock Movement and enjoy your exceptional DIY wall clock.. SATISFIED Let our upgrade your style with quartz DIY Wall Clock Movement. We will try our best to offer you . If you have any questions or issues for clock movement, please feel free to contact us for immediate support and assistance..

Package and install come with especially designed with blister cardboard box and instructions, convenient to carry, when you install this clock movement kit, please keep the hour hand and minute hand parallel Note there are detailed installation instructions on the back of the product package Please install carefully according to the installation steps. Size from the center of the hole to the tip the hour hand is approx. 133 mm 5.2 inches and 116 mm 4.6 inches long, the minute hand is approx. 175 mm 6.9 inches and 160 mm 6.3 inches in length 2 second caps 7 mm 0.28 inches. Clock mechanism size total shaft length is approx. 23 mm 0.91 inches, thread length is approx. 14.6 mm 0.57 inches Jump second movement is suitable for 9 - 13 mm 0.35 - 0.51 inches thickness clock panel. Easy to install the clock movements kits is easy for installation, simple and elegant design, these replacement parts suit well to different styles of clock frame Please choose the suitable size bezel to install the hands. Warm notice as the clock hands material are aluminum, the hands back color are silver, front color as the picture show, and please check the size before buying.

Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock.. Parameter I Shaft,drive long clock hands 10 mm to 450 mm Total shaft length is 18 mm 4564 inch, thread length is 5 mm 1364 inch,suitable for 1-3 mm 364 - 764 inch thickness clock panel.. DIY clock supplies the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames.. Package contents 1 clock movement with 1 hooks,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and instructions.. Warm notice when you install them, please keep the hour hand and minute hand parallel And please do not use too much pressure to avoid bending them..

Wall clock movement replacement Snap In Type Clock Accessory with No Bushing.. Young town manufactures the 12888 series in various models,makesure the existing shaft and threads before ordering and you will get the right replacement.. Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.. Movement total shaft length is 8mm 516 inch,thread length is 4.5mm 1164 inch.. Sweep Silent Movementsuitable for 1-2 mm 125 -565 inch thickness clock panel..

Good for repairing, replacing or making a clock.. Young town manufactures the 12888 series in various models,Please check the dimensions of this movement prior to purchase to verify the dimensions.. .Applicable to cross-stitch,three-dimensional embroidery,craft clock,frameless draw clock,etc.INSTRUCTIONS - Included along with the movements.. Pendulum type STEP movement, suitable for 9 - 13 mm 925 - 12 inches thickness clock panelTotal shaft length 23 mm 910 inches, thread length 15.4 mm 35 inch.Max Pendulum Swing 26Max Pendulum Weight 40g Max Pendulum Length 35cm.. This clock doesn't contain hook, they can't hang directly If the handle is too long, you can snip them as you want according to the size of the clock panel..

DIY clock repair kit you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself. Size jump second movement is suitable for 9-13 mm 0.35 - 0.51 inches thickness of clock panel, the total shaft length is approx. 20 mm 0.8 inches, and the thread length is approx. 13 mm 0.51 inches. Accurate time keeping and quiet motor the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment. Wide application these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts. 5 Different styles of hands this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.

PACKAGED WITH CARE Comes as a clock movement with 3 pack hands kit in a presentation box with custom foam inserts to protect all from scratching, bending, and other damage while shipping. CHOOSE THE SUITABLE MECHANISM this kit fit clock dials from 18 in - 14 in thick and is perfect for clock hands under 8 14 in long, making you smile of the memories your old clock gives you. DECORATIVE CLOCK HANDS Ornate sets for different options, perfect for your clock creations get to pick out the style and length of the hands that look best with your clock at no additional charge. ACCURATE TIME-KEEPINGQUIET MOTOR features EMOON high precision clock mechanism, which offers watchmaker's accuracy and dependability equipped with sweeping motion, no ticking powered by a AA battery. KEEP TIME IN STYLE With EMOON clock hands and mechanism combo, you too can be a clockmaker perfect for clock replacement, repairing all kinds of clocks, or making your own customized clock project.