Ultra Low Loss -- MOOKEERF rg8x coax cablealso called mini-8 is made with pure copper inner conductor,with double shielding to prevent signal leakage,interference and signal loss.It could support better signal transfer with minimum signal loss over large distances and higher frequency use.. Premium Materials -- The inner conductor of this dual cb coax cable is made with stranded pure copper that made the cable more flexible.The outer conductor is made with Aluminum foil and tinned copper braid which could maximum protect the signal over large distance.More than 95 shield performance,95 resistance to EMI and RFI.Waterproof FEP jacket allows the cable exposure in outdoor harsh environments.. Great Flexibility -- Stranded center conductor made this ham radio coax cable more flexible than other normal cable.. Strong Link PL-259 and FME Connectors -- High quality pl-259 connectors combined with good welding make the connector not easy to break off from the cable.The length of heat shrink tube that connect the rg8x cable and FME connector is upgraded to 2.2,which can better protect the connector from falling off.. Removable UHF Connector -- This dual cb antenna cable is equipped with two removable UHF connector, it allows hookup of Two twin CB or Amateur Radio antennas to 1 transceiver, making it perfect for installing your antenna in narrow areas such as the vehicle luggage rack,engine compartment cover and trunk.. Package Includes -- 1 Pack dual cb antenna cable,2 Pack FME Male to PL259 Male Connector. If you are not satisfied with any product,please dont hesitate to contact us,we provide 24-hour customer service and a 1-year warranty..

The All-in-One Solver - Eliminate Connector Confusion Not sure if you need a Male or Female end This 4-piece kit includes every combination BNC Male to UHF Female SO-239, BNC Female to UHF Male PL-259, and the reverse pairs. It is the perfect Gender Changer kit to keep in your toolbox for unexpected connection mismatches.. Primary Use Case - Connect Base Antennas to Handhelds Instantly adapt a heavy-duty PL-259 antenna cable from your rooftop or car mag-mount to fit your BNC handheld radio or scanner. Perfect for boosting the reception range of your portable devices by connecting them to external outdoor antennas.. Wide Compatibility - For Scanners CB Radios Designed for 50-ohm RF applications. Ideally compatible with Uniden Bearcat scanners, Cobra handheld CB radios, Ham radio HTs, SDR dongles, and legacy security camera systems requiring BNC to UHF conversion.. Signal Integrity - Low Loss Transmission Don't let cheap adapters ruin your signal. Made with high-quality brass and nickel plating to ensure low V.S.W.R and minimal signal attenuation. Supports reliable transmission for HF, VHF, and UHF frequencies 0-1000 MHz.. Durability - Heavy Duty Construction Features precision-machined threads for a secure, wiggle-free connection. The knurled grip design makes it easy to tighten and loosen the connectors by hand, even in outdoor environments. 12-month warranty included..

3 pin cb radio power cord, 2 wire 16-gauge heavy duty copper wire.. Used to replace power cord on most CB radios. Fits Cobra 2529148, Galaxy, Midland, Uniden, Connex, RCI, Ranger, Mirage and most others using the 3-pin plug. Built-in fused cigarette lighter plug with green LED indicator.. Power your CB radio from any lighteraccessory socket.. Dual spring contacts in cigarette lighter adaptor for maximum conductivity..

Built Tough for the Long Haul Crafted from 5052 aluminum alloy, the Mob Armor Rad Mount ensures durability. Ideal for off-road adventures, our mount also includes rubber pads to absorb shocks, protecting your handheld radio devices from everyday use.. Versatile Mounting Solutions Equipped with a powerful magnet and an additional steel disc, this Mob Armor radio mount sticks firmly to various metal surfaces such as nickel, iron, steel, and more. Simply attach and enjoy a powerful car mounting solution.. Unyielding Magnetic Grip Featuring a magnet with 90 pounds of pull force, the Mob Armor Mount promises your walkies talkies and radios stay in place. Compatible with a range of handheld devices, our innovative mounts keep your communication tools within easy reach.. Broad Device Compatibility The Mob Armor Mount fits various CB radios, GMRS radios, and handheld devices. Its design offers easy access and secure mounting, meeting your communication needs while on the road with reliability.. Engineered for the Outdoors Created by off-road enthusiasts, the Mob Armor Rad Mount withstands tough environments. Whether navigating wild terrains or working on rugged job sites, our magnetic car mount keeps your radios locked-in and accessible..

Auto-RetractThis tether features a 26 self-retracting steel cord. It extends smoothly and retracts automatically when released, with only the right tension to hold radio up to 10ozno drops, no tangles, and no hassle while driving.. 360Swivel ClaspThe full-rotation swivel hook moves freely to position your radio exactly where you need it. It prevents cord twisting and keeps it uncluttered and organized.. Glow-in-the-DarkGlows softly in low light after light. Ideal for easy location at night or in dim light. Save searching time and more safe.. Built to LastMade of sturdy ABS plastic shell and a 26 flexiblesteel Steel rope. It withstands daily wear, pulls and impacts for long-lasting reliability.. Easy to InstallComes with 4 Steel D-ring, 4 screws, and 2 long and 2 short adjustable ropes for easy installation on headliners, visors, or radio mounts in the car. Adjustable to suit your needs..

Portable Magnetic CB Mic HolderMobile Radio Mic Car Mount, compact structure, convenient and does not occupy a space. Easy to install, You can install it anywhere you want. High quality adhesive material, firmly fix your mic Strong magnetic fixation to avoid microphone shaking during driving. Compatible with CB micham radio speaker mics with Round Knob, For President Randy FCC, Randy II FCC, Randy III For Mobile Radio Mic model like Yaesu MH-67A8J, HYT SM16A1, QYT KT-8900 mic, Motorola PMMN4090 HMN3596A HLN9073 RMN5052A, Kenwood KMC-30 KMC-32 KMC-35 KMC-36For more details about radio model related to microphones, see the description on the details page. Not Compatible for Yaesu MH-48 MH36 MH-48A6J SSM-85D FT-7800R FT-8800R FT-8900R FT-7900R FT-7100M1 FT-1900R FT-2600 FT-2800 FT1802 FT-1807 FTM-300DR FTM-6000R mic Not Compatible for Midland GMRS microphone Not Compatible for Cobra CB mic. Note Confirm the installation position before installation, Repeated installation will makes it less sticky Clean the installation surface, Press the magnet to make it completely cover the installation surface, wait 24 hours to use after stuck for better effect.

REMOVABLE UHF CONNECTOR FOR TIGHT SPACES Our CB coax cable features a removable UHF connector that makes antenna installation in confined areas like vehicle trunks, engine compartments, and luggage racks a breeze. The highly flexible RG8X cable bends easily for seamless routing whether youre a pro installer or a DIY enthusiast.. LOW LOSS RG8X CABLE This RG8X coaxial cable boasts a pure copper inner conductor and dual shielding aluminum foil tinned copper braid that minimizes signal loss, keeping your transmissions crisp even during extended use. The rugged PVC outer jacket stands up to harsh weather conditions, making it perfect for outdoor use.. PL-259 MALE TO FME FEMALE CONNECTORS One end of the coaxial cable features a waterproof boot for easy outdoor use. Our connectors feature a nickel-plated solid copper shell and gold-plated brass center pin for max conductivity and corrosion resistance. The precision welding technique and structural reinforcement design reduce joint loosening or damage caused by frequent plugging and unplugging, ensuring a reliable connection and stable signal transmission.. REINFORCED 2.2 HEAT SHRINK TUBING We've upgraded the critical connection points with extra-long 2.2 heat shrink tubing that provides excellent reinforced protection between the RG8X cable and FME connector. This professional-grade reinforcement prevents cable separation and maintains signal integrity whether youre on the road or in the field.. UNIVERSAL APPLICATIONS Engineered to work flawlessly with CB radios, HAM radios, VHF radios, antenna analyzers transceivers tuners, monitors, dummy loads, and SWR meters. Whether you're a truck driver, radio enthusiast, or professional installer, this cable delivers professional performance, ensuring optimal signal transmission across all your communication equipment..

Crisp Clear Sound Experience enhanced audio quality with the Midland External Extension Speaker. This high-performance speaker delivers crisp sound, ensuring you never miss important communications on your CB, amateur, or marine two-way radio.. 20-Watt Capacity Prepare to have your audio experience cranked up to the max with our heavy-duty design Optional splice connection - a whopping 20-watt capacity. Say goodbye to feeble, lackluster sound. Our speaker delivers a powerful audio output .. Long Cord Length Get ready to stretch the limits of audio placement with our 6.5ft Cable. With this generous length, you have the flexibility to position your speaker wherever your heart desires.. Swivel Base Step into the spotlight of audio excellence with our jaw-dropping swivel base. It's not just a game-changer it's a sound revolution Our 180-degree mounting bracket swivel base puts you in the director's chair.. Midland Speakers Prepare to be blown away by the unrivaled durability and extraordinary high-performance features of Midland Speakers. We're not just speakers we're your ultimate communication companions that conquer the great outdoors..

3-Pin, 2 Wire 16-Gauge Heavy Duty Copper Wire, Length 4.8 ft. Used to Replace Power Cords on Most CB Radios. Built-In Fused Cigarette Lighter Plug wGreen LED Indicator Finger Grip. Heavy Duty Strain Reliefs. Fits Cobra 2529148, Galaxy, Midland, Uniden, Connex most others using the 3-pin plug.

Effortless Setup for Beginners and Experts The Nagoya CB-72 is designed with simplicity in mind, featuring an intuitive installation process that ensures a hassle-free setup. Whether you're new to CB radios or a seasoned enthusiast, this antenna makes installation straightforward, with a robust magnetic mount that secures your antenna quickly and effectively.. Extended Reach with Premium Coaxial Cable Enjoy the convenience of an extra-long 18' RG-58AU coaxial cable included with the CB-72, providing ample length for versatile setup options. This premium cable ensures full CB frequency coverage with no tuning required, making it ready to use right out of the box.. Optimized for Popular CB Radios Achieve superior performance with the CB-72, ideally suited for leading CB radios like the Uniden PRO505XL, Bearcat 980SSB, Bearcat 880, and Cobra 19 DX IV. This antenna enhances your radio's capabilities, ensuring seamless compatibility and improved signal quality for clearer communications.. Strong and Secure Magnetic Mount The CB-72 features a 3.5-inch heavy-duty magnetic mount, designed for maximum stability and security. This robust mounting solution ensures your antenna remains firmly in place, providing optimal performance and minimal SWR for the best possible communication experience.. Premium Materials for Durability and Performance Constructed with a solid brass NMO mount and a satin finish, complemented by a gold plunger-type contact pin, the CB-72 is built for lasting durability and reliable performance. Trust in the quality of Nagoya's engineering to deliver an antenna that stands up to the demands of the road and harsh environments..

High qualityRadio holster constructed by high quality and durable nylon material 1000D, high elastic rubber.Size of radio holder 3.51.75.9 inchLTH. Fits up to 4inch belt widths.. Adjustable designElastic cord and detachable patch to secure the radio inside the radio case.The detachable velcro inside the bag can be adjusted to tighten the radio at different height.. Molle systemEasy attach this to any of your molle compatible tactical vest, backpack, belt and other equipment to use for additional storage and customization.. Easy to useEasy to take the radio out and put it back into radio pouch with the open top design.The detachable velcro can be quickly released, convenient to open and close.. Wide application Apply for camping, tactical sports, hiking, rock climbing, EDC use and fitness, as ideal gift presented to relatives, friends..

WIDE APPLICATION The PL259 connector features a UHF male to UHF female design, perfectly compatible with coaxial cable, CB ham radio, antennas, VHF radios, SWR meters, and more. Whether for personal hobby setups, professional broadcasting, or outdoor antenna systems, this adapter ensures seamless, reliable performance across all your projects. Impedance 50 Ohm.. 90-DEGREE DESIGN Tight spaces No problem Our PL259 connector features a smart 90-degree design thats perfect for narrow spaces. It allows you to route cables in any directionleft, right, up, or downwithout bending or damaging. Ideal for compact CB setups, this adapter ensures a clean, organized layout while reducing stress on your cables for long-term reliability.. PREMIUM CONSTRUCTION The connector is made from brass, ensuring exceptional conductivity and structural strength. Its surface is nickel plated, adding a tough, corrosion-resistant layer that stands up to rain, wind, and humiditymaking it equally reliable for indoor use in your radio room and outdoor installations like antenna setups or vehicle-mounted systems.. SUPERIOR SIGNAL PERFORMANCE The contact points of this adapter are gold-plated, a feature that minimizes signal resistance and ensures maximum conductivity. This results in high-quality signal transmission with ultra-low loss, keeping your device communications clear, strong, and free from interference, even over extended distances.. COST-EFFECTIVE CHOICE Each package comes with 2 adapters, offering exceptional value for money. Whether you need a spare for future use, want to set up multiple radio systems, or simply want to share with a fellow radio enthusiast, this cost-effective solution delivers reliable performance for all your needs..

Exclusive VibraSorb Anti-breakage Design improves life of product. Pre-tuned fiberglass antenna element for the CB radio frequency range 2629.5 MHz. Operates only when connected to a CB radio transmitter.. Fiberglass Mast joined to Nickel Plated Brass Ferrule durable and quality materials to last longer. Made in the U.S.A..

Easily power your CB radio using any standard 12V cigarette lighter outlet. The built-in green LED indicator confirms a secure power connection, making it perfect for trucks, RVs, and off-road vehicles.. Constructed with 16-gauge heavy-duty copper wire, this CB radio power cord ensures stable power delivery, supporting high-wattage CB radios up to 40W without voltage drops or overheating.. The fused cigarette lighter plug features a replaceable 15A fuse to guard against overload, reverse polarity, or short circuitskeeping your device and vehicle safe at all times.. Compatible with most 3-pin CB radios including Cobra, Galaxy, Midland, Uniden, and Connex. No additional wiring or modification requiredjust plug and use.. At 59 inches 1.5 meters long, the cord provides flexible routing in larger vehicles. Its high-temp PVC coating resists wear, vibration, and heatideal for long-haul truckers and CB enthusiasts..

Provides a Better Radio Experience - Marketty knows that more than 89 of people love broadcast radio when driving. In order to have a better listening experience, our SS-3H CB antenna spring is made of durable, top-grade electro-polished stainless steel, and is finished in matte black by electroplating and polishing which this antenna spring is so strong and durable. Design for Your CB Antennas - Our CB radio antenna mount spring installs between the mount and antenna and provides flexibility in the event that the antenna is hit or jarred. The CB antenna mount fit Mobilein-Vehicle CB Radio Antenna Mount up to 60 long and standard 38 x 24 threads to fit antennas, which perfect fit for off-road vehicles, vans, trucks, RV, motorhomes, boats, and so on. Easy to Operate - Screw the CB antenna spring into any CB stud or mount, and then screw the antenna into the top of the disconnect. Spring can also be used with a quick disconnect they're simply stackedscrewed on top of one another. Every antenna should have a Marketty spring to protect the antenna, mount, and vehicle. More Antenna Spring Details - Marketty SS-3H CB antenna spring upper and lower inserts are made of chrome-plated machine brass. Each antenna spring is about 3.0, has Excellent strength fits like a glove to a Radio Shack twin mirror type, nice glossy finish. What You Get - Get our new antenna springs to start your listening journey and also get our 100 VIP customer service. TIP Marketty only provides only top quality CB antenna spring which please buy with confidence.

Compatibility The antenna compatible with Midland 75-822 75-785, Cobra HH50WXST HHRT50, Uniden PRO401HH PRO501HH, Maxon HCB-10C 27KC, etc.. Great Specifications The antenna features great specifications with 26-29MHz frequency range and gain 1.5dBi. The maximum power input is 10W along with impedance 50.. BNC Male Connector The connection of the antenna is BNC. When you are not sure if this antenna is suitable for your walkie talkie, please feel free to contact us.. Better Reception This antenna can make the reception of the walkie-talkie better.. Portable and Convenient The antenna is flexible and easy to install. The 9.8-inch length makes it easy to carry with a cb radio..

Cockpit Space Optimization Secures radiosstereosscanners to eliminate clutter, creating a tidier, safer driving environment.. Drill-Free Upgraded Fixing Clamping design avoids central control drillingprotects wiresinteriors with stable fixation even during sharp turns.. Safety-First Placement Cup holder mounting prevents rearview mirror blocking and windshield obstruction, boosting safety and convenience.. Durable Adaptive Design Shatter-resistant plastic with semicircular bracket longshort screws fit cup holders of varying thicknesses.. Tool-Free Hassle Setup No complex tools or skills needed. Includes T-bracket, rectangular bracket, and accessory bag for quick assembly..

Retractable Tether Designed for your CB Radio Microphone. Ensures your microphone is easy to find and use Keeps your mic right where you need it not swinging into your head or dropping on the floor like bungie cords.. Essential To secure your mic so that its easily extended during use, eliminating the need to re-hang on clip. No more fumbling around trying to hang your mic. Just grab your mic, use it, let it goIt retracts back up to the headliner.. Comfortable Retraction Force Offers 12oz retraction force with a 42 extension, extends to passenger, ideal for heavy mics. Locking mechanism allows for CB Mic to be locked in the extended position. Comfortably use your CB mic with minimal drag, pull or dangle.. Ease of Use Two ideal mounting options removable D-ring or semi-permanent large clamp for easy mounting to existing screw in headliner, visor or radio mount. Also includes adjustable lanyard to hang mic at right level for best access.. Trusted Brand With over 20 years of experience, Hammerhead Industries is the name you can count on Gear Keeper features retractable tethers to suit every need. If you have any questions, let our team know..

Free Up Your Lighter Socket This 12V cb power cord is a direct battery connection to your vehicle, keeping the 12V socket free for other devices No need to unplug when parked. Standard 3 Pin connector The 3 pin cb power cable compatible and works well with Cobra, Galaxy, Midland, and other standard CB radios, no wiring modifications required. Professional-Grade 16AWG Wiring CB radio power supply cord with10A continuous current and Heavy-duty copper conductors deliver stable power to high-wattage CB radios up to 40W, even during long transmissions. Secure Permanent Installation The off road cb power cord features fused battery clamp design and includes a 15A replaceable fuse to ensure current protection and a corrosion-resistant clamps for 247 battery connection. Durable for Harsh Environments This CB radio power wire is made of thick oil-resistant PVC sheathed to protects against engine bay heat and it's resistant to corrosion and friction, perfect for trucks, RVs, and off-road use.

High-Quality Sound This external communications speaker delivers clear, high-quality audio for your ham radio, CB radio, or scanner needs, ensuring you never miss important communication.. Compact and Durable Design With dimensions of 4.5 x 2.5 x 2.25 inches, this black speaker is designed to be both space-saving and sturdy, perfect for setup in any environment without sacrificing quality.. Versatile Compatibility Easily connect to a wide range of devices including CB radios, amateur radios, two-way radios, and police scanners thanks to its universal 3.5mm plug.. Powerful Performance Operating at 5 watts and 8 ohms impedance, this speaker is engineered for optimal sound projection and clarity in various communication situations.. Easy Installation Comes complete with a mounting bracket and hardware, making it simple and hassle-free to secure the speaker in your desired location for the best listening experience..

Use Cup holder radio mount is specially designed for fixing radios, stereos, and scanners in the cockpit. It can better solve the problem of crowded cabins and nowhere to fix equipment, making the driving space safer and more comfortable. Upgraded Part Compared with other cup holder cb mount, this bracket adopts clamping fixing method, no need to drill holes in the central control area, which can avoid damaging hidden lines and will not affect the interior. It is also fixed reliably and will not move or flip when making sharp turns. Practical Functions CB mounting bracket can be directly fixed on the water cup holder, avoiding the need to block the use of the rearview mirror when installed on the top, and avoid installing it under the windshield to affect driving vision, thus improving convenience and driving safety. Excellent Quality Cb cup holder mount is made of high-quality plastic, which is sturdy and not easy to break. The square bracket is semicircular to help hold the bracket in place. Two sets of long and short screws can adapt to cup holders of different thicknesses. You can choose to use according to your needs. Easy to Install The cb bracket design is simple and convenient, no complicated tools are required, easy to install and maintain, even without professional skills. The product includes 1T-shaped bracket, 1rectangular bracket, 1accessory bag.

NMO ANTENNA 3 inch UHF VHF dual band ham radio antenna is durable and waterproof. Frequency range VHF136-174MHZ UHF400-470MHZ Gain2.5dBi Radio antenna works great for Mobile Radio, Two Way Radio, Marine VHF Radio, Handheld Ham Radio, etc. PLUG PLAY The NMO magnetic mount with PL259 connector is compatible with vehicle-mounted devices with a UHF female connector. It's extremely easy to install and use for walkie-talkie enthusiasts. STRONG MAGNETISM The powerful magnetic attraction ensures the magnetic base securely holds the 3 inches cb radios antenna. LOW-CONSUMPTION RECEPTION The 16.4ft RG58 coaxial cable uses low-loss material to minimize signal attenuation over long cable runs, maximizing signal protection over long distances. FLEXIBLE INSTALLATION No drilling, screws, or tools are required. Simply attach it to the vehicle's metal surface. This flexible and convenient SUVRVtruckcar roof antenna mount is suitable for a variety of vehicle types and applications, such as transportation, off-road driving, and personal use.

Retractable Tether Designed for your CB Radio Microphone. Ensures your microphone is easy to find and use Keeps your mic right where you need it not swinging into your head or dropping on the floor like bungie cords.. Versatile Kit This set includes 2 sturdy microphone clips with swiveling joints, 4 secure mic stand clips, and 8 cable management clips for a complete mounting solution.. Durable Construction Made from high-strength plastic and metal alloy, these clips are built to withstand heavy usage and last for years. Flexible Mounting The microphone clips feature adjustable tension grips that can securely attach to any stand or boom arm between. Cable Management The included cable clips help keep microphone and instrument cables neatly organized and tangle-free..

Microphone clip made of high quality metal,Hard and durable, can firmly fix the microphone, don't worry about it falling down.. Microphone clip can be mounted on the dashboard and is a good replacement for the dash plastic.. Microphone clip SizeLength 52mm Width 35mm Height 10mm.. Package included 2 microphone clip and 4 screws, enough for daily use, matching good screws, more convenient to use.. Compatible models more GM3188 SM50 SM120 GM950E GM338 GM95I GM3688 car microphone hook microphone buckle..

Walkie-talkie Compatibility Be compatible with BaoFeng Kenwood Yaesu Quansheng Mortorola and other brand radios with back clip. Microphone Compatibility Be compatible with Alinco, Anytone, Bao-Feng, Kenwood, Midland, Motorola, Uniden, Yaesu, speaker mics with Round Knob. It is compatible with devices with a maximum width of 100mm, such as smart phone GPS locators. Easy InstallationAdhesive back and self-tapping screw installation make the holder stable after installation. What you get 1PCS HYSHIKRA Radio Bracket. If you have any technical or unsatisfactory problems, plz contact us by clicking RADIO MAX that below the Buy Now, and find the button ask a question.

12V 3 Pin Standard Adapter This cb lighter plug with 5 FT cable is flexible routing for trucksoff-road vehicles Built-in LED light confirms power connection at a glance. Universal Compatibility This cb radio power supply cable works well with Major CB Radio Brands like Cobra, Galaxy, Midland, and other standard CB radios. Safety Protection The ham radio power cable includes a replaceable 15A fuse for overload protection fuse to prevent damage from incorrect connections. Noise-Free Communication This 3 pin cb power cable with pure copper braiding and aluminum foil shielding reduces engine and electrical interference for crystal-clear audio High-temp PVC coating resists wear and harsh conditions. 10A Heavy-Duty Wiring The cb cigarette lighter adapter features 16AWG thick gauge wire for stable power transmission, supporting high-wattage radios 40W without voltage drop.

Retractable Tether Designed specifically for your handheld CB Radio Microphone, this tether ensures your microphone is always easy to find and use. It ensures the microphone remains securely fixed in its designated position, effectively preventing any unwanted swinging or accidental dropping,a must-have truck accessory for every truck driver and cb radio accessories.. Convenient Design It has a 360 rotatable hook ring for smooth, tangle-free, all-angle access, ideal for quick mic grabs. The luminous material lights up in low light, enabling easy nighttime retrieval. Ideal for truckers needing instant equipment access. NOTE For first use, expose to sunlight or flashlight to absorb light, and it will glow at night.. Strong and Durable The cb radio mic hanger is made of high-strength ABS plastic shell, metal alloy spring, and PVC-coated steel wire core, which is extremely abrasion-resistant and can withstand 12 ounces of tension and multiple stretches without worrying about breaking or sagging, making it strong and durable enough to handle daily wear and tear with ease. Easy to Install The included adjustable lanyard allows you to adapt the placement of your mic, ensuring its positioned at the optimal level for easy access and comfort. You wont have to worry about the mic being too high or lowsimply adjust the lanyard and youre ready to go. Wide Application Featuring a steel clip, this mic holder isn't just for vehiclestake it anywhere Securely clip it to your belt during off-road patrols, or as a leash for small pets. The rugged design withstands outdoor abuse while keeping your CB microphone accessible in any situation..

Specifically for CB radios Elongated slots line up perfectly with your radio's standard mounting holes, included locking hardware keeps everything tightly in place, preventing shakes and rattles to keep your radio safe on the road. Fully Adjustable Features a 3-piece sliding design,this cb radio bracket can easily adjust from 6 to 10 in width to fit your specific device The pieces can be overlapped for an even narrower fit down to 5.25, providing exceptional flexibility for various mounting scenarios. Wide Compatibility This universal bracket is designed to securely hold in-vehicle devices, which is perfect for CB Radios, Police Scanners, Radar Detectors, Stereos, External Speakers, gauges, or small auxiliary lights. Complete All-in-One Kit The ham radio mount kit includes the heavy-duty bracket, all necessary mounting hardware, AND 2 universal 5mm plastic mounting knobs, no need other parts to finish installation. Heavy Duty Mounting Bracket Adjustable CB bracket combines a robust alloy steel core with a premium electrodeposition finish for superior durability, scratch resistance, and corrosion protection.

CB Microphone 4 pin Compatible with CobraUnidenWorkmanMidlandGalaxy Stryker Retevis radio,Mic compatible with Cobra 21 LTD CLASSIC, 25 LTD CLASSIC, 29 LTD CLASSIC,21 LTD WX, 25 LTD WX, 29 LTD WX, 93 LTD WX. 4Pin Mic with wide PTT Key-press area, convenient for operating. CB radio microphone transmits high quality sound even in loud environments and helps to provide a really perfect long range distance communication. PR240 mic Strong reinforced PU cable durable coil cord, high tensile strength long-life design. Handheld microphone Excellent for use in FBI,Bodyguard,military,nightclubs,bars,paintball,security,restaurants,hotels,bouncer,warehouses,airports,casinos,manufacturing plants,conventions and noisy environments.

Perfect Fit The heavy-duty microphone stand for Truck Drivers is specifically engineered to withstand rough road conditions, ensuring dependable performance during long-distance driving. It also helps keep your cab organized for a seamless driving experience. Durable Construction The CB retractable mic holder is made from heavy-duty polycarbonate casing and metal alloy, and can withstand high tension, repeated stretching, and daily wear and tear. Retractable Mic Tether This retractable microphone stand features a cable that extends up to 24 inches, ensuring easy access while preventing cable sway or interference with operation, and it enhances cockpit tidiness and safety. Easy Installation The retractable mic holder leash is manufactured using a 77 strand stainless steel cable with a vinyl-coated rope body that glides smoothly. It easily attaches to your car roof, sun visor, or audio equipment for instant use. Versatile Kit This CB mic retractable holder kit includes 2 microphone clip4 ring hole4 Quick Release Adapter Clip, and comes equipped with versatile accessories for flexible positioning. It is suitable for dual-microphone configurations or shared microphone scenarios.

1.Strong and Durable The cb radio mic hanger is made of high-strength ABS plastic shell, metal alloy spring, and PVC-coated steel wire core, which is extremely abrasion-resistant and can withstand 12 ounces of tension and multiple stretches without worrying about breaking or sagging, making it strong and durable enough to handle daily wear and tear with ease.. 2.Retractable Tether Designed specifically for your handheld CB Radio Microphone, this tether ensures your microphone is always easy to find and use. It ensures the microphone remains securely fixed in its designated position, effectively preven-ting any unwanted swinging or accidental dropping,a must-have truck accessory for every truck driver and cb radio accessories.. 3.Convenient Design It has a 360 rotatable hook ring for smooth, tangle-free, all-angle access, ideal for quick mic grabs. The luminous material lights up in low light, enabling easy nighttime retrieval. Ideal for truckers needing instant equipment access. NOTE For first use, expose to sunlight or flashligh t to absorb light, and it will glow at night.. 4.Wide Application Featuring a steel clip, this mic holder isn't just for vehiclestake it anywhere Securely clip it to your belt during off-road patrols, or as a leash for small pets. The rugged design withstands outdoor abuse while keeping your CB microphone accessible in any situation.. 5.Easy to Install The included adjustable lanyard allows you to adapt the placement of your mic, ensuring its positioned at the optimal level for easy access and comfort. You wont have to worry about the mic being too high or lowsimply adjust the lanyard and youre ready to go.

This Mic Hanger Mount is compatible with Alinco, Anytone, Bao-Feng, Kenwood, Midland, Motorola, Uniden, Yaesu, speaker mics for HT's all two-radio with belt clip or Round Knob. Just clip the clip onto the mount and your ready to go.. Universal Belt cilp Round Knob compatible- This Mic Hanger Mount will work with Alinco, Anytone, BaoFeng, Kenwood, Midland, Motorola, Uniden, Yaesu, speaker mics for HT's all two-radio with belt clip or Round Knob. 3-Ways to setup, 1 3M VBH adhesive back, 2 Drill in hard install Drill Screws are not included 3 Single T compatible- This is compatible with all single T mounting solution in the market from makers like Arkon, bracketron, ProClip, Panvise more. One Year Manufactures Direct Replacement Warranty.

Feature 4.92 Feet 3 Pin Cobra CB Power Supply, 2 heavy-duty 16-gauge copper wires Used to replace the power cord on most CB radios. Wide Compatibility The CB Radio Power Cords are compatible with Cobra 2529148, Galaxy, Midland, Uniden, Connex and most others using the 3-pin plug. 2 Connection Methods The CB Radio Power Cable for Cobra is in two packages, one for taking power from the vehicle battery and connecting to the device, and one for connecting the cigarette lighter to the device with a frontal indicator that helps you know if the wire is inserted correctly and start working. 15A Fuse Multiple Protection The cb power cord has a built-in 15 amp fuse to protect against overloads or short circuits Protect your car's battery health while protecting your device. 16GA Pure Copper Cable This 3 Pin CB Radio Power Plug built-in pure copper core wire has excellent electrical conductivity, can provide low resistance, low loss of current transmission, and can maintain the stability of the wire in high temperature environment.

Compatible with the microphone you already have. Works with scan mode see Mfg. website for details instructions. The Magnetic Base replaces the old metal clip. Securely holds the microphone in place. Installs in minutes.

FME and connector for an easy install. Tinned copper stranded center conductor. Vinyl boot to protect connection. High-quality super low loss mini-8 cable. 18 feet long.

ATTENTION Dear customers, please recognize our store Moremro Direct products to purchase, so that both the product or logistics are more guaranteed What Will You Get You will receive 2 pcs Black CB Mic Holder, size 36 x 30 x 101.42 x 1.18 x 0.39 inch LWH. Using this holder provides you with a convenient and secure solution for hanging your microphone in the car.Note Do not use the hook immediately after sticking, please wait for 24 hours after the adhesive to play the maximum effect and then use the effect will be better. Unique Design Our metal car microphone holder features a unique design with a sticker on the back that allows it to be directly adhered to the car. Its sleek black metal structure adds a sense of style to your car interior while ensuring durability and long-lasting performance.. High-Quality Materials We prioritize quality, and this CB Microphone Holder is no exception. It is made of high-quality metal with an electroplated surface, making it sturdy, reliable, and resistant to rust or corrosion. It can be used for a long time.. Wide Range Of Uses This versatile Car Mic Holder is designed to accommodate various microphones and can be used in cars, trucks, RVs, or any other vehicles. It provides a stable and easily accessible location for hanging your microphone, ensuring convenience during communication or recording sessions.. Easy To Use Our Black Metal car microphone holder is designed for ease of use. It is easy to install by simply peeling off the protective sticker on the back and directly sticking it to a clean and dry surface.After sticking the hook, press evenly. Leave on for 24 hours for better results..

Compatibility The microphone hanger is compatible with Alinco, Anytone, Bao-Feng, Kenwood, Midland, Motorola, Uniden, Yaesu, speaker mics with Round Knob.. Convenient Communication The back clip design of this bracket allows you to conveniently place the car microphone near your mouth, ensuring clear and effective communication.. Durable Quality Made with high-quality materials, this holder is built to last, providing long-lasting durability and reliability.. What you get 1PCS Mic Hange HolderBack clip version. If you have any technical or unsatisfactory problems, plz contact us by clicking RADIO MAX that below the Buy Now, and find the button ask a question.

Retractable Tether Designed specifically for your handheld CB Radio Microphone, this tether ensures your microphone is always easy to find and use.It ensures the microphone remains securely fixed in its designated position, effectively preventing any unwanted swinging or accidental dropping,a must-have truck accessory for every truck driver and cb radio accessories.. Easy Access Secure your cb microphone with ease, allowing it to extend smoothly during use. The retractable badge holder features a steel rope that extends up to 31.5 inches. This gives you ample reach for comfortable mic access. Simply grab, speak, and releaseit automatically retracts to its storage position.. Effortless Extension Retraction The cord of this heavy-duty reel is made with stainless steel a 7x7 strand steel cable for maximum strength and durability. Its vinyl coating drastically reduces friction, facilitating smooth travel and comfortable retraction. Rated for 10 oz load capacity, the MIC holder withstands over 110,000 extension retraction cycles. Operate your CB mic with minimal effort and consistent performance.. Heavy-Duty Construction The retractable mic clip features a sturdy polycarbonate shell that significantly outperforms ABS in strength and durability. Built to withstand frequent drops and impacts without cracking, its paired with a high-strength zinc alloy carabiner.. Easy to Install Includes a D-ring for easy mounting to an existing screw in the headliner, visor, or radio mount. It also comes with an lanyard to hang the mic at the right level for optimal access..

The Uniden Bearcat BC15 15 Watt Communication Speaker is an external accessory speaker that offers enhanced audio from CBs, Ham Radios, and Scanners. Rugged and durable enough for any mobile application.. The Uniden BC15 is a great looking speaker with a two-toned black and silver face-plate.. The BC15 external communication speaker features 15 watts of max power and the BC15's built in noise blanker helps to reduce electrical interference that other manufacturer's accessory speakers allow to bleed through.. The Uniden BC15 is fully compatible with all radios capable of accepting 3.5 mm audio plug in connectors. Installation is quick and easy with BC15, in fact the most difficult part will be in locating your preferred mounting location.. Mount the BC15 communication speaker, plug in the 10 foot speaker wire to the speaker jack on your radio, and enjoy crystal clear audio output.. If your mobile two-way radio happens to be mounted in a difficult to reach location the right angled 3.5 mm audio plug on the BC15 will make it easier to get connected to the radio.. No more cranking your radio all the way up just to hear the conversation.

Compatible with all handheld CB radios from many brand with a BNC connector, improve quality and range to CB radio reception. The antenna design is soft, flexible and durable, works on all channel within CB radio frequency range of 26MHz to 27 MHz.. Max Input Power 30W Frequency 27MHz Antenna Mounting Connector Type BNC Male Connector Length 9.9 inch 25cm Weight 420g. Feature with Magnetic Base Cable Type RG58U Coaxial Cable Cable Length 3m 10 feet Cable Connector Type BNC Male Connector Accessories UHF PL-259 Male Connector Adapter. Package List 1 x Antenna, 1 x Magnetic Base, 1 x Connector Adapter As the Picture Shown. Compatible with Handheld CB Radios Uniden PRO401HH PRO501HH PC88LTX, Cobra HH50WXST H38WXST HHRT50, Midland 75-785 75-822 7W44, Maxon HCB-10C.

FOR ANY 12 HOLE. FITS ALL FIRESTIK ANTENNAS AND MOUNTS. BULK ITEM. NO RETAIL PACKAGE.

Installs inline between antenna radio.. Has Min, Max Off Selector switch.. Helps Reduce Noise Interference entering thru the Antenna Coax.. For CB Amateur Ham radios, 24-30Mhz, 50W p.e.p max.. Requires Optional patch cable for radio hookup..

10 AMP FUSE POS. 6 FEET LONG 12 GAUGE WIRE. BOTH SIDES FUSED. STANDARD 3 PIN RADIO PLUG. 4 AMP FUSE NEG.

Dual-Mode AMFM Convenience Efficient communication while on the road just got easier. This CB radio provides access to both AM and FM channels, allowing communication with more users, long range or near, and with better sound quality.. Ultra-Compact Design A full-featured CB radio for recreational or professional use that easily fits in the palm of your hand. Whether you are off-roading or going on a road trip the 19 MINI will be there to assist you when being left on your own.. Clear Communication With 40 channels, full 4 Watts RF output power, and a heavy-duty mic, you are guaranteed loud and clear sound. Perfect for construction and delivery drivers to provide an effective way to coordinate with their team.. Hardwire or 12V CLA Power Options Includes 48 Hardwire Kit for direct-to-battery installation 48 12V Power Adapter for instant power. Conveniently connect or disconnect from the MINI CB as needed 12V Power Adapter included with 19 MINI AMFM.. Instant Channels 919 Instantly switch to emergency channel 9 or information channel 19 with one push so you can keep other truckers informed of the road ahead whether it is regarding road construction, accidents, or possible speed traps.. VOX Hands-Free Usage With the 19 MINI CB Radio you can stay safe on the road and enable the hands-free CB operation to automatically transmit when you speak. This feature will make it so you never have to take your hands off the wheel.. Adjustable Receiver Sensitivity Stay connected and clearly communicate when it matters most. Easily adjust RF Gain sensitivity to reduce background noise and static without reducing reception, resulting in the best signal while on the road..

Package Includes the package includes 1 set of adjustable universal mounting bracket for CB and 2 sets of bolts This ensures an easy installation process, expanding your CB radio accessories and offering convenience and utility. Adjustable Design the CB radio mount adjustable design, which caters to different needs By adjusting the width between about 6 inches and 10 inches, you can ensure an optimal fit for your CB radio accessories, meeting the varied demands of customers. Quality Material made from quality steel, this CB radio mount offers rugged and reliable durability Its steel construction ensures its long lasting operation, making it a reliable component in your CB radio accessories. Easy to Use this CB mount comes equipped with a bolt that has a diameter of about 6mm and length of about 2cm The mounting bracket is simple to use and easy to operate Just fasten the bracket with the two bolts provided. Widely Applied this CB radio mount is versatile and user friendly, making it widely applied in different settings It could use to mount CBs, scanners, radar laser detectors or stereos.

Built to outperform the competition - a non-abrasive heavy duty 4 inch magnet ensures that once the antenna is placed, it will stay there as long as you need it to. The ultimate recreational magnet mount antenna - ideal for trucks, SUVs, and recreational vehicles this antenna will stay on when you need it, But is completely removable when not in use. Use the coax 15 feet of matched-braided Coaxial cable to attach to any CB or 10 meter radio RF Pl259 connector. Works with all CB 10 meter radios - 100 Watt rating with broad-banded frequency of 26-30mhz and weather channel ready. Package weight 1.0 lbs.

Package Includes you will receive a set of replacement mounting bracket kits compatible with Cobra 29 or Uniden 78 CB radios, including 1 mounting bracket and 5mm radio bracket knobs. Sturdy and Durable radio bracket is made of high strength alloy material, pressure resistant and rust proof, durable, can reinforce the radio body, and is more anti-shake when driving bumps. Applicable Size the cb mounting bracket length about 5.31 inches 13.5 cm, width about 1.38 inches 3.5 cm, detailed size can refer to the product size diagram, manual measurement, there may be a little error. Easy to Operate the mounting bracket is simple to use and easy to operate Just use the two bolts provided to fix the bracket. Wide Application the CB radio replacement bracket can better fix your radio, compatible with Cobra 29 and Uniden 78 series radios.

Unidens Professional Series PRO520XL Heavy-Duty CB radio offers a full 4 watts transmit power, with RF gain control, and 40-Channel operation in a compact rugged construction CB radio.. The PRO520XL has a front mount 4-pin electret microphone with extra-long coiled cord, SRF LED meter, instant emergency channel 9, transmit indicator lights, Automatic Noise Limiter switch, Public Address switch, Volume control, Squelch control, and more.. Extremely popular for Industrial, Commercial, and Off-Road use. Easily fits in most any vehicle because of its compact size.. Built-in External Speaker Jack allows connecting to an optional external speaker, and you can use the Public Address function to be heard outside your vehicle with an optional PA speaker.. A superheterodyne circuit with phase locked loop technology assures precise frequency control. Included in the box CB Radio, Microphone and Hook, Mounting Hardware, Knobs, Mounting Bracket, User's Manual. CB Radio antenna required, not included, sold separately.. 40-channel mobile CB radio with superheterodyne circuitphase locked loop for precise control. Built-in automatic noise limiter and auto-squelch to eliminate noise and improve communication. SignalRF meter and LED indicators to monitor activity instant channel 9 access for emergency situations. Connect external speakers and use PACB switch for use as a Public Address system. Front-positioned microphone with extra-long, coiled cord for convenient use.

Retractable Tether Designed for your CB Radio Microphone. Ensures your microphone is easy to find and use Keeps your mic right where you need it not swinging into your head or dropping on the floor like bungie cords.. Essential To secure your mic so that its easily extended during use, eliminating the need to re-hang on clip. No more fumbling around trying to hang your mic. Just grab your mic, use it, let it goIt retracts back up to the headliner.. Comfortable Retraction Force Offers 9oz retraction force with a 28 extension, it provides reliable security without fatiguing the driver You can comfortably use your CB mic with minimal drag, pull or dangle.. Ease of Use Includes D-ring for easy mounting to existing screw in headliner, visor or radio mount. Also includes adjustable lanyard to hang mic at right level for best access.. Trusted Brand With over 20 years of experience, Hammerhead Industries is the name you can count on Gear Keeper features retractable tethers to suit every need. If you have any questions, let our team know..

Includes ratchet-it Carabineer with 36 ratcheting reel, 8 Nylon tether with attachment loop, d-ring mount screw not included.. Built-in ratchet mechanism locks the reel in 5 intervals. Durable polycarbonate frame and heavy duty Kevlar cord. D-Ring Mount Included.

Higher Output Cigarette Lighter Splitter Dual cigarette lighter adapter with independent switches provide a total power of up to 180W, enough for simultaneous use of various watt automotive electronics, like Dash Cam, Radar Detector, GPS, Car Refrigerator, Heated Seat Cushion, Vacuum Cleaner.. Faster USB Charging Features both 20W PD UBS C and dual QC 3.0 USB ports to boost the charging process. Total 7A output charge three devices simultaneously at full speed.. LED Voltage Display monitors your car battery timely. Warning with flashing number on the display when the voltage is under 12V. keep the battery health and safe.. This car power splitter can be used for both 12V DC and 24V DC. Rated Power 200W. USB Output 5V DC, 7A in total. Replaceable Fuse 15A.. Safe Usage with Protections 18-Month Warranty. Stable plug with built-in replaceable 15A fuse and protective circuits against overcharging, over-temp and short-circuit to safeguard your precious appliances..

External speakers can achieve louder and clearer sound than radio speakers, with less background noise.. 1.8m71 cable is used to expand the placement of external speakers and connect the radio quickly and easily.. Easy to use and set up, simply install the bracket with screws, secure the external speaker, and then plug the socket into the radio.. Size approx. 4.5 x 2.5 x 2.25 8 ohms. Includes mounting bracket and screws..

World Famous Replacement Mic. Rugged Housing Design. Polyurethane Coated Steel Grille Screen. Low Impedance Dynamic Element. Coiled Cord.

Compatible with CB radios from many brands, improve quality and range to CB radio reception. The antenna design is portable, lightweight and durable, works on all channel within CB radio frequency range of 26MHz to 28 MHz.. Heavy Duty Magnetic Mounting Easy to be installed on the roof, hood or trunk of vehicles and trucks, and will not scratch.. Working Frequency 27MHz Max Input Power 30W Cable Type 3m 10 feet RG58U Coaxial Cable Antenna Height 13 inch 33cm Weight 480g. Cable Connector Type PL-259 Male Connector Accessoried with BNC Male to SO-239 Female Connector Adapter Compatible with Mobile CB Radios and Handheld CB Radios. Package List 1 x Antenna, 1 x Connector Adapter As the Picture Shown.

Classic CB Design Cobras classic CB radio has been the standard of excellence in professional CB radios for over 50 years. This radio is durable, reliable, and full-featured with 4 watts of power and access to all 40 CB channels.. Dual-Mode AMFM Efficient communication while on the road just got easier. This CB radio provides access to both AM and FM channels, allowing communication with more users, long range or near, and with better sound quality.. Easy to Operate - Ergonomic design with intuitive controls make this radio easy to operate. The included 9-foot microphone cable makes it simple to speak into and reach regardless of vehicle size and results in less clutter vs storing a longer cable.. Instant Access to Channel 9 CB radios provide reliable communication which is not dependent on satellites and cellular networks. Get access to all 40 CB radio channels and instantly access emergency channel 9 to get updates from law enforcement.. SWR Antenna Calibration If your CB antenna is hit with tree branches or other items, adjust and calibrate SWR meter for optimum antenna performance and get notified when your SWR antenna needs to be checked with the illuminated indicator.. Adjustable Receiver Sensitivity Stay connected and clearly communicate when it matters most. Easily adjust RF Gain sensitivity to reduce background noise and static without reducing reception, resulting in the best signal while on the road..

EFFORTLESS RETRACTABLE TETHER Designed specifically for your handheld CB radio microphone, this tether keeps your mic secure, easy to reach, and right where you need it. With a comfortable 9oz. retraction force and a 28 extension, it provides smooth, reliable access without causing fatigue or dragging while driving.. ESSENTIAL TRUCK ACCESSORIES A must-have for any professional driver- no more fumbling to re-hang your mic on a clip. This CB mic holder keeps your microphone securely in place and always within arms reach, helping you stay organized, focused, and safe on the road.. PREMIUM QUALITY Engineered for reliability with industrial-grade materials and a QC disconnect system, this CB Mic Holder Retractable is built to perform in any driving conditions. Trusted by professional drivers nationwide. EASY MOUNTING Comes with a D-ring for quick mounting to your headliner, visor, or radio mount using an existing screw. The included adjustable lanyard lets you position your mic at the perfect height for easy access.. TRUSTED EXPERTISE Backed by over 20 years of experience, Hammerhead Industries is a name drivers rely on. Gear Keeper offers a full range of retractable tethers and truck driver accessories to meet every need..

Compatible with CB radios from many brand , improve quality and range to CB radio reception. The antenna works on all channel within CB radio frequency range of 26MHz to 28 MHzCenter 27MHz, No tuning needed. Frequency Range 26-28MHz Center Frequency 27MHzMAX RF Power 30WCable 3M10Ft RG-58UV.S.W.R 1.21Impedance 50 OhmAntenna Heigth 9.9 inch 25cm Weight 420g Antenna Connector BNC MaleAdapter BNC Female to UHF PL-259. Compatible withUniden PRO505XL or Bearcat 980SSB 880, Cobra 19 DX IVCobra HH50WXST HH50 MRHH350FLT C75WXST HHRT50Midland75-822 75-785 MHS75Uniden BC75XLT PRO401HH PRO501HH BC125ATOther UHFBNC Connector 27MHZ radios suitable for this antenna. Easy to install on the roof or trunk of any vehicle and enjoy quality signal reception.. Package List 1 x Antenna kit, 1 x Adapter As the Picture Shown. Don't worry about any problems, we have carefully checked each product, Any questions, please feel free to contact us, will reply within 24 hours .

Professional SeriesMicrophone for 4 pin CobraUnidenWorkmanMidlandGalaxy CB radio. Compatible with most 4 pin CB radio.. High Sound QualityThe dynamic voice coil diaphragm design on this CB Radio microphone was made to provide excellent sound quality in all areas of microphone performance.. Noise CancelingProvides maximum talk power and intelligibility even under noisy conditions.. Easy to OperateHeavy duty coiled cord, Length 2Ft Mini 5FtUsual 8Ft Max. Designed for close talking handheld applications. The left side push to talk button and the 8 foot coiled cord for this dynamic microphone, as well as a comfortable ergonomic design, allow for convenience at your fingertips even when on the road.. Lifetime WarrantySimple and convenient return process. Lifetime warranty and 30 days no reason to return. If you have any questions, please feel free to contact our Customer Service..

CB Radio Test Meter The SW-111 is a reliable analog SWRpower meter designed specifically for CB radios, with a frequency range of 26.96527.405 MHz. It provides an accurate reading of the antenna and coaxial cable's condition, helping users optimize performance for their CB radios. Please note, it is not suitable for HF frequencies 3-30 MHz.Frequency rangeCB 27-30MHz not support VHFUHF. Achieve Optimal Signal Minimize Loss Precisely measure Standing Wave Ratio SWR to maximize your transmitted power. Our detailed manual includes a power loss chart e.g., 21 SWR 11 power loss, showing you exactly why tuning matters. Achieve a 11 to 1.51 SWR for best performance across the 27MHz CB band.. Dual Range Power SWR Measurement Features selectable 100W and 10W power ranges for accurate readings from standard to high-power CB radios. With dedicated FWD Forward and REF Reflected switches, you can easily measure both SWR and relative RF power with an accuracy of SWR 5 and Power 10.. Compact and Easy to Use The SW-111's analog display is simple to read, making it an ideal choice for both beginners and seasoned CB radio users. With its straightforward operationsimply switch to FWD mode, press PTT, and adjust for SWR readingsthis compact device is a practical and user-friendly tool for measuring the condition of your CB antenna and coaxial cable.. Permanent Installation Wide Compatibility Designed for CB antenna systems, this meter can be permanently installed in your transmission line with no measurable power loss. Its compact size 84x59x52mm fits anywhere. Caution A jumper cable PL-259 is required but not included. Always ensure proper connections before transmitting.. Warning The cable or connector is not included with the product.NOTE Outside the optimal operating temperature range 20-40C, the instrument may experience slower startup, slight display flickering, or increased measurement error. It is recommended to use the device within this temperature range to ensure optimal performance and measurement accuracy..

P Channels P1-P5 -preconfigured memory channels using FM mode and fixed CTCSS DCS for targeted communication.. NRC Noise Reduction Circuit advanced filtering for clear audio in noisy environments. Scan skip quickly scan and skip unwanted channels for efficient navigation.. Built-in VOX handsfree operation ideal for multitasking and mobile use.. Key Lock prevents accidental channel changes and locks preferred settings.. ANLNB Hi Cut Filters reduce noise, static, and high-frequency interference. LED Flashlight for nighttime use or emergency visibility with 4 flash settings including SOS.. Complete Kit Included comes with antenna, belt clip, wrist strap, battery pack, AC adapter, desktop dock, mobile charge module, mic support, and user manual. Extended Warranty 2-year standard warranty, extended to 5 years with simultaneous purchase of a President antenna under the 23 years program..

1000 Watt Rating gives the desired amount of power. Exclusive VibraSorb Anti-breakage Design improves the life of the product. Broad Tuning Range 26.000 to 29.500 MHz. Fiberglass Mast joined to Nickel Plated Brass Ferrule durable and quality materials to last longer.. Includes Heavy Duty Stainless Steel Black Antenna Spring.

Pre-tuned fiberglass antenna element for the CB radio frequency range 2629.5 MHz. Operates only when connected to a CB radio transmitter.. Exclusive VibraSorb Anti-breakage Design improves life of product. Fiberglass Mast joined to Nickel Plated Brass Ferrule durable and quality materials to last longer. Made in the USA.

CONVERTS AC TO DC the bench DC power supply features ac-dc converter variable linear regulated design. Provides reliable AC-to-DC Power conversion with a constant source of DC voltage. Works with cellular phones, CB radio, scanner, ham radio, etc. DUAL USB PORTS This workbench variable power converter features two 2 USB charge ports and universal banana Plug connection terminals compatible with a wide range of devicesequipment. Used to test deviceequipment operation and performance. 7 AMP the simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Constant Amperage is up to 7 amp with 4.5Amp continuous, power output of 13.8V DC, and 120 volt power supply. SHORT-CIRCUIT PROTECTION This is equipped with built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected electronics. It has rugged and durable housing construction cabinet Heatsink. CIGARETTE LIGHTER This desktop bench power supply is equipped with a cigarette lighter, and a power socket adapter to provide power to portable devices. Switch-activated power control eliminates the need for an external battery or additional power source.

Portable CB Mic HolderMobile Radio Mic Car Mount, compact structure, convenient and does not occupy a space. Easy to install, You can install it anywhere you want. High quality adhesive material, firmly fix your mic. Compatible with CB micham radio speaker mics with Round Knob, For President Randy FCC, Randy II FCC, Randy III For Mobile Radio Mic model like Yaesu MH-67A8J, HYT SM16A1, QYT KT-8900 mic, Motorola PMMN4090 HMN3596A HLN9073 RMN5052A, Kenwood KMC-30 KMC-32 KMC-35 KMC-36For more details about radio model related to microphones, see the description on the details page. Note Please confirm the proper position before installation. Repeated installation will makes it less sticky wait 24 hours to use after stuck for better effect. Package include 2 Mobile radio Speaker mic CB mic Mount Holder.

Portable CB Mic HolderMobile Radio Mic Car Mount, compact structure, convenient and does not occupy a space. Easy to install, You can install it anywhere you want. High quality adhesive material, firmly fix your mic. Compatible with CB micham radio speaker mics with Round Knob, For President Randy FCC, Randy II FCC, Randy III For Mobile Radio Mic model like Yaesu MH-67A8J, HYT SM16A1, QYT KT-8900 mic, Motorola PMMN4090 HMN3596A HLN9073 RMN5052A, Kenwood KMC-30 KMC-32 KMC-35 KMC-36For more details about radio model related to microphones, see the description on the details page. Note Please confirm the proper position before installation. Repeated installation will makes it less sticky wait 24 hours to use after stuck for better effect. Package include 1 Mobile radio Speaker mic CB mic Mount Holder.

POWERFUL MAGNETIC HOLD Equipped with heavy-duty neodymium magnets to ensure your communication device stays securely attached, even on bumpy roads or rough waters. Never worry about dropping your gear during transit again.. DAMAGE-FREE INSTALLATION Features a premium adhesive backing that mounts firmly to any flat surface without the need for drilling holes. Protect your dashboard and interior while keeping your setup professional and clean.. UNIVERSAL COMPATIBILITY Designed to fit most standard Transceiver Speaker Microphone, CB Mic, and other device with round knob. The adjustable collar clamps perfectly onto the back knob of your device for a seamless integration.. VERSATILE PLACEMENT Ideal for a wide range of vehicles and environments. Perfect for commercial trucks, off-road 4x4s, emergency fire engines, marine boats, or home base stations.. ALL-IN-ONE KIT Comes with everything you need for a quick setup, including the magnet, microphone holder, screws, and a precision screwdriver. Follow our simple step-by-step visual guide for hassle-free assembly..

The Perfect Choice In a Short Antenna with Maximum Performance. Large 10 oz. Magnet. 300 Watts Power Handling Capability ICAS. Made with High Impact Thermoplastic. Heavy-Duty Coil Uses 14-Gauge Copper Wire. Low Loss Coil Design. 36 17-7 PH Stainless Steel Whip - included. Base Load Antenna. Boxed Package.

Great sounding compact communications external speaker. Size approx. 4.5 x 2.5 x 2.25 8 ohms.. Includes mounting bracket hardware.. Great for CB radios, amateur Radios, two way police scanners.. Includes cord with standard 3.5mm Plug..

Radio clip Mount for all Handheld Speaker micHT radio-Universal Round Knobtwo way radiomic with Belt clip. The hanger Holder mount stand is made of high quality, which is more attractive and durable. Material Aluminium Alloy. The Radio clip mount for Cobra, Alinco, Anytone, Bao-Feng, Kenwood, Midland, Motorola, Uniden, Yaesu, President Radiospeaker mics for HT's all CB two-radio with Round Knob Belt Clip.. Lightweight design,convenient to carry and use, Easy Install Designed to be Mounted without Spacers or Bar Mounts, come with clip and Screws.. 1Pc of Two way radio bracket, suitable for use in multiple cars, such as taxi, suv, truck, other place etc..

3-pin, 2 wire 16-gauge heavy duty copper wire.. Used to replace power cord on most CB radios. Fit for most other using the 3 Pin plug.. Built-in fused cigarette lighter plug with green LED indicator.. Power your CB radio from any lighter accessory socket.. Dual spring contacts in cigarette lighter adaptor for maximum conductivity..

Features 8 ohms and 5 watts peak power. Includes a swivel bracket and 6 feet cord. Designed for clarity on the road.

Coaxial cable with soldered PL-259 Connectors. For use with single CB antenna SO-239 stud mounts. Low loss signal cable. Stranded center conductor for flexibility. 122 braided strands of copper.

3-Pin, 2 Wire 16-Gauge Heavy Duty Copper Wire. Used to Replace Power Cords on Most CB Radios. Built-In Fused Cigarette Lighter Plug wGreen LED Indicator Finger Grip. Dual Spring Contacts for Maximum Conductivity. Heavy Duty Strain Reliefs.

Durable Metal Mesh Grill. Includes Swivel Bracket, 3.5mm Plug and 8' Cord. 5 Watts 8 Ohm Operating Power. For use with CB Radios ONLY.