CNC machined from 7075 Aluminum, black or silver anodized. One piece housing construction, offset C-hubs is machined into the housing for strength, durability, clearance and scale appearance. Quality heat treated S2 steel front axle VDI shaft , rear axle shafts and portal stub shafts, large increase in strength. Machined and hardened ring, pinion and portal gears, Stronger than stock substantially. 8T 30T ring and pinion gear set, 12T 23T portal gear set, 7.191 gear ratio. Front axle weight 307g 0.68 Pounds. Rear axle weight 218g 0.48 Pounds.. Increased Caster Angle to 20 for improved steering, 50 of side to side steering. 5 over stock CapraSCX10 III axles. 195mm Width Pin to Pin, Slightly wider than Axial SCX10.3, and slightly narrower than Axial Capra. Two servo mounting options are available A Use the removable Panhard3rd link mount as a CMS option. Chassis-Mounted Servo. B Use the removable BTA mounts as a AMS option. Behind Axle Mounted Servo. Shipped fully assembled, includes complete front and rear axles.

This portal axles kit is a game changer for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features. Made of high quality aluminum alloy, equipped with 40CR 6mm output shaftthicker than 5mm stock shaft, fixed with M4 nut and 20CR 8T-30T gears for greater hardness and durability. US patented Patent No. US D1,053,707 S Isokinetic 3-section CVD ensures that there are no jerks when turning at large angles, 52 max. steering angle, default max. steering angle is 48, can be upgraded to 55 by grinding the limit structure on steering knuckles and modifying ET to get wider wheelbase, please be noted that Gen2 axles has upgraded CVDs with greater strength, there will be a II as mark on Gen2 axles, Gen1 axles only compatible with old CVDs, and Gen2 compatible with upgraded CVDs and old CVDsrequires extra thicker bearings. If you choose normal version The kit comes with a normal rear axle and a steering axle equipped with smaller C-Hub plus 96g brass axle cover at each side to get lower center gravity for better trafficability, the ackerman steering structure allows smoother steering and prevents tires from slipping sideways. If you choose 4WS version The kit comes with 2 steering axles, one axle comes with upgraded smaller aluminium C-Hub, 8-24T diff gears and 96g brass axle cover at each side to get lower center gravity for better trafficability and overdrive, it's highly recommend to use it as front axle, the other axle comes with smaller aluminium C-Hub, 8-30T diff gears to get underdrive, it's highly recommend to use it as rear axle. This combination will provide the max. crawling performance. Providing 2 servo placement options for you to choose according to different scenarios, adding a pre-drilled hole on front axle for thrust rod installation for better stability.

3mm carbon fiber frame rails, machined solid delrin skid plate, front rear chassis brace and rear power wagon cab body clip. Optional carbon fiber Capra battery on axle servo mount, stainless steels links kitlinks not included in chassis kit, needs to be ordered separately. With 13 degree angled skid plate, super slippery for sliding over rocks and debris, transmission mounting holes designed for Axial 3 gear type transmission or simular. We have provided you with Multiple front and rear shock mount positions for shock tunning, and holes for a carrier bearing as well. If use our skid and links kit for Capra axle, the chassis wheelbase is 330mm, if you use your own skid and links, the wheelbase is adjustable. Excellent breakover and climbing abilities, compact is the overall theme, keep it light, keep it simple. Includes hardware required for assembly, sold as a kit, self-assembly required.

110 Crawler Diff CoverBrass diff cover set includes front and rear one2Pcs, compatible with Axial SCX10 III stock AR45P axles, 110 Capra stock portal axles, SCX10 Pro stock axles. SCX10 III Brass Axle CoverMade of brass, weight of 76g2.68oz, only makes the axles more robust and durable, but also provide additional weights. SCX10 Brass UpgradesProfessional brass upgrades, performance upgrades kit, specially designed and crafted for 110 RC crawlers SCX10 III, Pro and Capra. Excellent WorkmanshipCNC machining provides precise dimensions of SCX10 Pro diff cover, perfectly replacing the stocks. Including the hardware, all fit well. Anti-corrosionThe black electrophoretic coating not only provides rust and corrosion resistance, enhancing the lifespan of the diff cover, but also gives 110 crawler a premium look.

Enhanced Traction and Climbing Ability The 1520T portal gear with a 1.331 gear ratio provides a 36 overdrive, significantly improving traction and climbing performance by allowing the front wheels to spin faster and pull the vehicle over obstacles more effectively.. Durable Construction Made from high-quality, heat-treated steel, these gears are designed to withstand extreme conditions and offer maximum strength and durability, ensuring long-lasting performance in demanding RC crawling environments.. Precision Machining Each gear is precisely machined to ensure a perfect fit and smooth operation within the Axial Capra F9 and SCX10 III AR45 portal axles. This precision engineering contributes to the reliability and efficiency of your RC vehicle's drivetrain.. Versatile Gear Options The set includes both the 1520T overdrive gear for front axles and the 1223T standard gear with a 1.921 gear ratio, identical to stock ratios. This combination allows for a tailored setup that optimizes vehicle performance by enhancing front axle overdrive and maintaining rear axle stability.. Ideal Compatibility Specifically designed to fit 110 Axial Capra F9 and SCX10 III AR45P portal axles, these gears provide a seamless upgrade option for RC enthusiasts looking to improve their vehicle's crawling capabilities and overall performance..

This portal axles kit is a game changer for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features.. Made of high quality aluminum alloy, equipped with 40CR 6mm output shaftlonger than 5mm stock shaft, fixed with M4 nut and 20CR 8T-30T gears for greater hardness and durability.. Isokinetic 3-section CVD ensures that there is no jerks when turning at large angles, default max. steering angle is 48, can be upgraded to 55 by grinding the limit structure on steering knuckles and modifying ET to get wider wheelbase.. Comes with upgraded smaller C-Hub plus 96g brass axle cover at each side to get lower center gravity for better trafficability, the ackerman steering structrue allows smoother steering and prevents tires from slipping sideways.. Providing 2 servo placement options for you to choose according to different scenarios, adding a pre-driiled hole on front axle for thrust rod installation for better stability.. Package includes front axle and rear axle, steering links3..

Ultra-Compact and Featherweight PerformanceWeighing only 57g 2.01oz, this transmission delivers exceptional power efficiency without unnecessary bulk. The compact footprint 30 56.5 37.5mm ensures a lower center of gravity, ideal for competitive LCG crawler builds where weight savings and space optimization are critical.. Precision-Engineered Carbon Fiber and Alloy Hybrid ConstructionBuilt with a high-strength carbon fiber case, CNC-machined aluminum motor mount, and heat-treated alloy steel gears, this gearbox provides an unbeatable balance of strength, durability, and lightweight performanceengineered for demanding rock crawling conditions.. Advanced Overdrive Gear Ratios for Enhanced Crawling ControlDelivers 18.6 base overdrive, improving steering precision and climbing stability by synchronizing front and rear wheel speeds. Optional configurations enable 28 or 38 overdrive using different gear sets, allowing expert tuners to fine-tune traction and control for various terrains.. Titanium Output Shafts for Ultimate Efficiency and DurabilityEquipped with Grade 5 titanium output shafts, this transmission offers superior wear resistance, reduced drivetrain flex, and optimal power transfer efficiencyperfect for competition-level rock crawlers that demand maximum performance and reliability.. Versatile Mounting and Compatibility DesignDesigned for motor-forward setups Right Motor Version with M3 mounting holes spaced 23mm apart, it easily integrates with Axial 3-gear transmission patterns and fits 48-pitch pinions 9T17T. Includes an aluminum slidable shim and full hardware set for seamless installation and fine-tuning..

7075 Aluminum One-Piece Construction CNC machined from high-grade 7075 aluminum, this axle housing offers superior strength, durability, and a sleek anodized finish in black or silver, ensuring both functionality and aesthetic appeal.. Increased Steering Angle With an offset C-hub design and a 20 caster angle, this axle provides an impressive 50 steering angle 5 more than stock CapraSCX10.3 axles, enhancing maneuverability on tough terrain.. Strong Heat-Treated Steel Components Equipped with heat-treated S2 steel axle shafts, portal stub shafts, and hardened ring, pinion, and portal gears, this axle is significantly stronger than stock, offering exceptional durability during heavy-duty use.. Optimized Gear Ratios Featuring an 8-30T ringpinion gear set and 12-23T portal gear set with a 7.191 ratio, the axle provides excellent power transfer and torque management for enhanced performance on difficult climbs and descents.. Versatile Servo Mount Options The axle offers two servo mounting options chassis-mounted servo CMS with a removable Panhard3rd link mount or behind-the-axle mounted servo BTA, giving users flexibility in setup based on preference and performance needs..

Premium SCX24 upgrades for 124 RC crawler Axial SCX24 Deadbolt C10 JLU Gladiator Bronco.. Made of aluminum alloy and brass, anodized purple surface, front axle 85g3oz, rear axle 35g1.2oz.. US patented Patent No. US D1,052,393 S lsokinetic 3-section CVD ensures that there is no jerks when turning at large angles, 52 max. steering angle.. Front and rear equipped with customized 2-14T gears, by replacingm the gears of rear axle to 2-16T gears, you can get 14 underdrive.. Support high torque adjustable servo mount, adjustable height rear axle structure with upper link mount, diamond-cut diff cover..

Fits ForUpgrades Part Portal Axles For 110 DIY SCX10 SCX10 II,Capra 1.9 UTB 4X4 4WD. Anodized 6061-T6 aluminumFront Rear Portal Axles precision CNC machined,lightweight and durable,increase the long-lasting durability,of High quality of aluminum. High Quality MaterialFront Rear Portal Axles wear-resistant, strong and durable, can use for a long time.. Easy to Assemble The upgrades part set is easy to replace original parts, highly increase the strength and precision.. Upgrades partExcellent upgrades part, better experience the fun of RC car,making your RC car more exquisite and beautiful..

Made of high-quality plastic materials and metal, it is more sturdy and durable, improves appearance, is easy to use, and easy to replace. Weight 398 gramsset. Suitable forAxial Capra UTB10 1.9 UTB 110 RC Crawler Car. Note Color deviation might exist due to different monitor settings and light, please kindly understand.. If you are not satisfied with our product, you can apply for a return, refund, or exchange, or contact us in a timely manner, and we will help you solve the problem.

This portal axles kit is a game changer for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features.. Made of high quality aluminum alloy, equipped with 40CR 6mm output shaftlonger than 5mm stock shaft, fixed with M4 nut and 20CR 8T-30T gears for greater hardness and durability.. Isokinetic 3-section CVD ensures that there is no jerks when turning at large angles, default max. steering angle is 48, can be upgraded to 55 by grinding the limit structure on steering knuckles and modifying ET to get wider wheelbase.. Comes with upgraded smaller C-Hub plus 96g brass axle cover at each side to get lower center gravity for better trafficability, the ackerman steering structrue allows smoother steering and prevents tires from slipping sideways.. Providing 2 servo placement options for you to choose according to different scenarios, adding a pre-driiled hole on front axle for thrust rod installation for better stability.. Package includes front axle and rear axle, steering links3..

Made of high-quality brass, CNC machined, exquisite and long-lasting.. Each weights 65g, lowering the center of gravity of UTB18 model to improve its driving stability.. Perfect as replacement for the stock plastic part AXI212010.. Suitable for AXIAL 118 UTB18 Capra TRAIL BUGGY.

Superior Performance EnhancementThe 1.9 UTB front and rear axles significantly boost ground clearance,ensuring seamless ascents and descents across diverse terrains. By reducing torque on other powertrain components, these 110 RC car UTB10 axles enhance overall vehicle performance, delivering smoother, more efficient runs. Ideal for tackling challenging trails with ease.. Precise Dimensions WeightTotal Length 255mm 10.04in Pin-to-Pin Width 225mm 8.86in Set Weight 398g 0.88lb Engineered with precision, these axles offer a perfect fit for your 110 scale RC crawler, balancing durability and lightweight design.. Complete Package Contents1 x Front Axle Assembly 1 x Rear Axle Assembly Everything you need for an instant upgrade is included. Refer to product images for detailed visuals.. Premium Build QualityCrafted from a robust combination of 6061-T6 CNC-machined metal and high-grade plastic, these RC car upgrade parts feature meticulous craftsmanship. Built to withstand intense use, they provide long-lasting reliability for all your RC adventures.. Effortless InstallationDesigned for hassle-free setup, these 110 crawler car front and rear axle upgrades are a breeze to install. Simply replace old or damaged parts directlyno complex tools required. A must-have for RC model enthusiasts seeking a quick, convenient performance boost..

Fit For SCX10 II 90027 90028 90046 90047 110 RC Rock Crawler. High pinion gears for added ground clearance better driveshaft angles. Larger load bearings used around the gear set to reduce flex and create a stronger drive-train. Aluminium Alloy Housing ,Steering RodSteel internal gears and driveshaft, durable in use. Complete Alloy Front Rear Axle Assembly Parts Upgraded.

110 RC Crawler Brass KitBrass kit includes steering knuckle2Pcs, portal steering knuckle caps2Pcs and portal axle housing2Pcs, universal for Axial SCX10 III AR45PF9 and 110 Capra AR45PF9CP44 portal axle. SCX10 III Brass UpgradesMade of brass, weight of 481g1.06lb, only makes the axles more robust and durable, but also provide additional weights, lowing the gravity center of chassis. Axial Capra 1.9 UpgradesProfessional brass kit, performance 1.9 Capra upgrades with great gripping and climbing ability, specially designed and crafted for Axial Capra and SCX10 III enthusiasts bored with plastic stock accessories. Excellent WorkmanshipCNC machining provides precise size of SCX10 III brass axle parts, good replacement for stock pieces, matching and fitting well. Anti-corrosionThe black electrophoretic coating not only provides rust and corrosion resistance, enhancing the lifespan of these SCX10 III brass axle parts, but also gives 110 crawler a premium look, cooler.

This CHEAT CODE version is specially designed for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features.. Comes with modified wheel distance, 5mm shorter at front than normal version, make it easier to pass some narrower places to win points The thickened CVD brings better strength to overcome larger load and tough terrains. Made of high quality aluminum alloy, equipped with brass front knuckle, aluminum rear knuckle, 40CR 6mm output shaftthicker than 5mm stock shaft, fixed with M4 nut and 20CR 8T-30T gears for greater hardness and durability.. US patented Patent No. US D1,053,707 S Isokinetic 3-section CVD ensures that there are no jerks when turning at large angles, 52 max. steering angle, default max. steering angle is 48, can be upgraded to 55 by grinding the limit structure on steering knuckles and modifying ET to get wider wheelbase.. The kit comes with front and rear axles, front axle is equipped with smaller C-Hub plus 96g brass axle cover at each side to get lower center gravity for better trafficability, the ackerman steering structure allows smoother steering and prevents tires from slipping sideways.. Providing 2 servo placement options for you to choose according to different scenarios, adding a pre-drilled hole on front axle for thrust rod installation for better stability..

This CHEAT CODE version is specially designed for Capra 1.9 and DIY SCX10 SCX10 II chassis with lots of amazing upgrades and features.. Comes with modified wheel distance, 5mm shorter at front and 10mm shorter at rear than normal version, make it easier to pass some narrower places to win points The thickened CVD brings better strength to overcome larger load and tough terrains. Made of high quality aluminum alloy, equipped with 40CR 6mm output shaftthicker than 5mm stock shaft, fixed with M4 nut and 20CR 8T-30T gears for greater hardness and durability.. US patented Patent No. US D1,053,707 S Isokinetic 3-section CVD ensures that there are no jerks when turning at large angles, 52 max. steering angle, default max. steering angle is 48, can be upgraded to 55 by grinding the limit structure on steering knuckles and modifying ET to get wider wheelbase.. The kit comes with front and rear axles, front axle is equipped with smaller C-Hub plus 96g brass axle cover at each side to get lower center gravity for better trafficability, the ackerman steering structure allows smoother steering and prevents tires from slipping sideways.. Providing 2 servo placement options for you to choose according to different scenarios, adding a pre-drilled hole on front axle for thrust rod installation for better stability..

Suitable for Axial SCX24 Deadbolt C10 JLU Gladiator Bronco 124 RC Crawler. This 4WS version comes with two front axles with steering structure, one axle equipped with brass steering knuckles while the other one equipped with aluminium knuckles. You will get a heavier front axle and four-wheel steering system for a better crawling performance. The axle with brass steering knuckles weights 74.8grams, the axle with aluminium steering knuckles weights 50grams. MEUS Racing patented 3-Section-CVD structure effectively minimize the wobbles of front wheels while cornering to level up the steering performance, further more, your little monster will get a max. 52steering angle which is nearly double as the stock axles 27 to explore more fun and possibilities with you. The axle housing is made of nylon material via injection molding, which provides better flexibility while conquering tough terrains. Diff gears, diff covers, servo mount and steering links are made of high quality aluminium alloy for greater durability, strength and stability to get the competence against fierce driving. We set 5mm extended in width at each side to the axles to get more clearance while steering thus allowing more tire selections..

Perfectly replicates the geometry features of the original Vanquish H10 Optic axle ,. Adjustable Lower Shock Mounting Position. Nylon axle housing with brass counterweight, inside with steel gear and shaft. Brass C-hubs and steering knuckle , add weight for each side to offer a counterweight effect. recision Preload Adjustment Integrated gear preload adjustment system for optimal gear mesh and quiet, efficient power transfer.. CompatibilityDesigned specifically for Vanquish Products VP H10 Optic model ,also fit for Capra 1.9 UTB.

Perfectly replicates the geometry features of the original Vanquish H10 Optic axle ,. Adjustable Lower Shock Mounting Position. Nylon axle housing , inside with steel gear and shaft. recision Preload Adjustment Integrated gear preload adjustment system for optimal gear mesh and quiet, efficient power transfer.. CompatibilityDesigned specifically for Vanquish Products VP H10 Optic model ,also fit for Capra 1.9 UTB.

Designed for Axial Capra Unlimited Trail Buggy UTB10 AXI03004B AXI03000B AXI03022B.. Reinforced Version II. Great looks. Easy to assemble disassemble. Effectively improve the stability of your car.. High precision manufacturing technology.. Made of aluminum. CNC machine tool processing.. Package List 1 set Front Axle.

Fits ForFront Rear Portal Axles Upgrades Part for 110 Capra 1.9 UTB 4X4,DIY SCX10 SCX10 II.. High-quality MaterialAluminum Portal Axles of High quality of aluminum,precision CNC machined,lightweight and durable,increase the long-lasting durability.. High Reliability The rc car upgrades parts highly increase the strength and precision.. Long-lasting Performance Specially designed strengthening cut-outs for increased crash resistance.The upgrades part is durable enough,improves the overall performance of the rc car.. Easy to InstallIncrease overall performance and durability of your RC car.Easy to install, great for replace the old or broken part..

Assembled set. Straight Front Rear Axle Set with Metal Forward Reverse Bevel Gear for 110 RC Crawler SCX10 II 90046 47 R-G-T 86100.. Steel internal gears and driveshaft.. Weightforward axles set about 286g. Weightreverse axles set about 278g.. Lightweight upgrade instantly enhances overall performance in handling and durability.. Reverse axle works with reverse transmission, reduce shaft-induced effect..

Complete Front Rear UTB18 Portal Axle Set Includes fully assembled UTB18 portal axle set with aluminum portal axles, portal gears, differential gears, CVD axle shafts, and portal stub axles. Plug-and-play upgrade designed for Axial UTB18 Capra 118 RC Crawlers. CNC Machined Heavy Duty Aluminum UTB18 Axles Precision CNC-machined aluminum housings deliver exceptional strength, accurate gear alignment, and resistance to high-torque stress for demanding trail and rock crawling conditions. Increased Ground Clearance Improved Stability The UTB18 portal axle set raises axle height for better obstacle clearance while improving traction, side-hill stability, and smooth articulation on rocks, trails, and rough terrain. Fully Assembled Ready to Install Front and rear UTB18 axles come pre-built to save installation time. Compatible with stock drivetrain components for a hassle-free upgrade experience. Performance Upgrade or Direct Replacement Front axle weighs 195g, rear axle 140g, Ideal for replacing worn factory UTB18 axles or upgrading to a stronger metal UTB18 portal axle set.

Compatible with VS4-10 Chassis Upgrades These aluminum CNC F10 front and rear axles are suitable for 110 RC Crawler VS4-10 Axial SCX10 II chassis upgrades. High-Quality F10 Portal Axles The F10 portal axles are crafted from precision-engineered CNC aluminum alloy. Our gears are made of fully machined steel for durability. One-Piece Molded The F10 portal axles feature one-piece molded bearing retainers for an unmatched scale look, ensuring durable and smooth drive, helping you easily cross any terrain. Specifications of the F10 Portal Axles Parachute tooth 8T30T Door reduction gear 20T28T Axle tooth ratio 7.191 Steering angle about 45 Output shaft 5mm Input shaft 5mm Connector size 12mm Binder thickness 5.6mm Net weight front axle 320g, rear axle 237g. What You Get 1 set of Vanquish F10 Portal Axles front and rear, a worry-free 12-month warranty, and access to friendly customer service.

Made of high quality nylon and fiber material via high precision mold injection, exquisite frosted surface, comes with metal gears and bearings. Thickened 3-section ISO CVD, max. 52 steering angle, 6mm thickened output shaft. Featuring SOAServo On Axle and BTABehind The Axle servo mounting options, allowing non-destructive transition from one to the other according to your need. Front axle is equipped with 70 grams metal counterweight for heavier front of your crawler for better performance. Two wheel distances available 1 AR44AR45 wheel distance194mm from hex to hex 2 Capra wheel distance224mm from hex to hex.

This portal axles are formed from high-quality nylon and fiber materials by high-precision mold injection molding, surface frosting texture treatment,comes with metal gears and bearings.. The front axle adopts large-scale c-knuckle design and the rear axle is an integrated structure. At the same time, the caster angle of the front axle is 18.5 degrees and the kingpin inclination angle is 7.5 degrees.This is a perfect angle, which can effectively improve the stability of the vehicle when climbing.. The ground clearance is increased by 12mm, effectively improving the trafficability and stability.. Equipped with servo mount and rear link mount, a link is specially equipped for the structure of servo on the beam. It is a great select for Axial SCX10 SCX10 II 110 RC Crawler..

These hex hubs are made of brass to get extra weight, lower the center gravity of your UTB18 model.. CVD axle shaft provides smoother drive and 45 steering angle to get more effcient drivetrain.. This kit is perfect as replacement for AXI212003 AXI212007 AXI212015.. Suitable for AXIAL UTB18 Capra TRAIL BUGGY 118 RC Crawler..

Made of brass material, precisely CNC machined, black anodized with exquisite apperance, solid and long-lasting.. Each weights 51g, providing extra weight to axles to lower the center of gravity for better driving stability and trafficality. Easy to install, great for replace the old or broken part. The steering knuckles ONLY suitable for MEUS 110 Capra 1.9 UTB portal axle, not for Capra 1.9 stock axle. Package include steering knuckle2, screw kit1.

The rear link riser ONLY for MEUS 110 Capra 1.9 UTB portal axles, not for Capra 1.9 stock axles. Made of high-quality aluminum, offers enhanced strength and durability. Easy to install, replace the original part without damage. Package includes rear link riser1, accessory kit1.

Axial Cage Set, Complete, Black Capra 4WS UTB, AXI231045.

Aluminum Front Rear AxleRC Axles CNC Metal RC Axles Complete Set for 110 RC Crawler Axial SCX10 II RGT 86100 Redcat GEN8 Element Enduro CC01.. CNC Front Rear AxleThis 110 crawler Front Rear Axle is made of 6061 aluminum shell, CNC machining, tailor-made for DIY enthusiasts Integrated C-Hub design, integrated Panhard mount, upper link mount built into the differential cover. Upper Link Mounts Built into Differential Cover.. High Quality Matetial Made of Aluminum alloy CNC processing RC front and rear axle kit with anodized and hardened surface, steel spiral gear, excellent quality. Novel appearance and exquisite workmanship, Servo structure on the axle steering force is more stable.. Large Steering Integrated AxleThis high simulation appearance front and rear set with slope axle egg, excellent trafficability. The upgrades RC front axle comes with 46 Large Steering, 8 inclination, Steel internal gears and driveshaft,gear ratio8T24T, 8T27T, 8T30T, 8T33T.. 100 Quality Guarantee Servicesinbox 1pcs Front AxleContains servoSOA mount, 1pcs Rear Axle. AMK offered 100 customers satisfaction warranty, please feel free to get in touch with us if you have any question on our products, our team willing to help you to solve the problems that you have meets..

UTB18 Brass Counter WeighThe Brass Counter weight is suitable for 118 RC Crawler UTB18 Capra Upgrade. CNC machined high quality brass material.. Brass Axle Portal CoverHeavy Black Coating Brass Counter Weight utb18 Portal Axle Housing for 118 RC Crawler UTB18 Capra Unlimited Trail Buggy RTR Upgrade.. LCG RC Brass Counter WeightExquisite Appearance, Black coating finish to prevent oxidation, make your rc car look more beautiful and delicate.. Great PerformanceHeavy duty, add weight to the axle which lower the vehicle's gravity, increase the stability. Extending the track width for a wider stance and greater control and stability.. After-sale Service10pcs Brass Weights. We provide 7x24 hours customer service Please feel free to contact us if you have any questions..

The steering kunckle ONLY fits MEUS 194MM224MM wheel distance AR44AR45 Capra Isokinetic nylon straight axle. Made of high-quality brassaluminum for added strength and durability. Brass kunckle weights 269gpcs, aluminum kunckle weights 28.5gpcs. Providing extra weight to axles to lower the center of gravity for better driving stability and trafficality. Easy to install, replace the original plastic part without damage. Package includes steering kunckle2.

This is MEUS Racing Isokinetic 3-Section CVD axle shaft, installed inside car axles for Capra 1.9 110 scale car models.. The Isokinetic 3-section CVD structure is designed for smooth transmission and reduces jerks while turning at large angle, providing better driveline system for RC car models.. The 3-section CVD axle shaft features the transmission component called universal joint, the two shafts are connected via one U-shape buckle to get larger transmission angle for better flexibility and stability,. This 3-section structure is long-lasting to ensure longer service life of the whole car axles.. Only for MEUS RACING Capra 1.9 axles with Isokinetic 3-Section CVD axle shaft B0D879C2CR and B0D86YHNJD..

Axial Steering Axle, Assembled UTB18, AXI218001.

RELIABLE MATERIALSOur products are made of high quality materials. The housing is made of 7075 aircraft aluminum for superior strength and corrosion resistance. Bevel gear sets are made from 20CrMo alloy steel to ensure high strength and durability. Universal joints are made of tool steel for superior rigidity and durability. Bearing sets are made of bearing steel for smooth operation and long service life.. ONE PIECE AXLE HOUSING DESIGNOur product utilizes a one-piece axle housing design to ensure durability and stability. It provides excellent performance and long service life, whether in sharp turns or rough road conditions.. Gimbal Steering Angle Over 45 Degrees In order to provide excellent maneuverability and flexibility, our products have a steering angle of over 45 degrees. This means you can steer freely on narrow roads and complex terrain and enjoy a more precise handling experience.. For Axial Capra 1.9 UTB AXI03004 Off-Road Vehicle F9 Ghost 90018 RR10 Upgrade PartsDesigned for Axial Capra 1.9 UTB AXI03004 Off-Road Vehicle, F9 Ghost, and 90018 RR10, our products are designed to be easily upgraded. You can enjoy more powerful performance and a higher level of off-road experience. EXCELLENT PERFORMANCEOur products have been carefully designed to deliver exceptional performance. Not only can they adapt to complex terrain and extreme conditions, but they also provide stable handling and reliable use. Whether you're competing in a race or doing recreational driving, our products are designed to meet your needs and allow you to enjoy unparalleled driving pleasure..

Designed for Axial Capra Unlimited Trail Buggy UTB10.. Reinforced Version II. Great looks. Easy to assemble disassemble. Effectively improve the stability of your car.. High precision manufacturing technology.. Made of aluminum. CNC machine tool processing.. Package List 1 set Front Axle Housing..

The servo mount ONLY fits MEUS 194MM224MM wheel distance AR44AR45 Capra Isokinetic nylon straight axle. Featuring SOAServo On Axle and BTABehind The Axle servo mounting options, allowing non-destructive transition from one to the other according to your need. Made of aluminum for better strength and durability. CNC machined piece with accurate data, each of its parts fits perfectly. Replace stock plastic parts to increase steering precision.

FitmentFront and rear portal axle housing Gear set are upgrades for 118 Axial UTB18 Capra trail buggy crawlers AXI01002 . Replacement Parts for AXI218001.. Brass Weighted Steel Material Brass can increase the crawler's overall weight and stability. Hard-anodized colour,Manufactured from tough 45 steel for long lasting durability and low wear.. More Convenient to UpgradelEquipped with adjustable servo tie rod holder and servo set, more convenient to install.. SpecFront Rear Portal Axle Set with aluminum box.Pls note that the harder you play with your RC car, the easier it will break, when this happens, contact our seller.. RCAWD ServiceOver 15 YEARS of developing, a very wide range of accessories for all models are available at RCAWD.We cherish every customer. Any doubts, pls contact our RCAWD team.

Axial Currie F9 Portal Axle Housing, 3rd member Rear Capra 1.9 UTB, AXI232005.

Axial Currie F9 Portal Axle Housing, 3rd member Steering Capra 1.9 UTB, AXI232004.

Axial Portal Stub Axle 2 Capra 1.9 UTB, AXI232008.

Offset Pumpkin. Machined Aluminum Construction. Increased Caster. Over 50 degrees of steering. Removable upper link mount. Bent Stainless Tie rod for added steering angle.

The INJORA Portal Axle creates extreme amounts of ground clearance under the center of your axle.. Diamond-shaped pumpkin for increased clearance a more realistic, scale look.. Optimized gear ratio 3.75 compared. This reduces torque twist which is typically seen with other small pumpkin axle designs.. Come with protect armor, servo arm, 12mm wheel hex, nuts and screws, easy to install.. Hardened steel gears and drive shaft, use all SCX10-II linkage, suit for 110 RC Crawler Car Axial SCX10 II 90046..

This Hard Steel Front Axle CVD Shaft is for Axial Capra Unlimited Trail Buggy. Made of high quality hard steel. Sturdy and durable, easy to install.. Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.. Package Included 2pcs cvd shafts..

This Hard Steel portal stub axle drive shaft is fit for Axial Capra Unlimited Trail Buggy. Made of high quality hard steel. Sturdy and durable, easy to install.. Package Included 2pcs cvd shafts..

This metal axle housing set is fit for 110 rc crawler Axial Capra Unlimited Trail Buggy UTB.. Color Black housing Black cover.. Currie F9 portal axle housing for front axle.. Package Included 1pcs axle housing, 1pcs housing output and some mounting screws..

High quality solid billet aluminum 7075 to protect the center diff system.. Super craftsmanship and machining.. Precision tolerance control to make it perfect fit all factory inner or outer portals.. Direct replacement and easy install with all hard wares needed.. Black and clear two color options.