50mm Crankshaft Pulley Wrench Holder Tool--- Used to maintain the harmonic damper pulley in position while removinginstalling the pulley bolt on many Acura and Honda engines. Use of 50mm Pulley Holder --- Crank Pulley Holding Spanner Tool is used with 12 square drive tools. With Hexagonal shape design perfect fits the crank pulley to hold it and prevent it rotating. 19mm Harmonic Balancer Socket --Used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Used with an impact wrench to loosen the crankshaft bolt without holding the crank pulley. Use of 19mm Socket --- 19mm Crank Bolt Socket is used with 12 drive tool, perfect for impact wrench. Designed with 6-point contact and more than 3 times of the standard socket mass to direct more energy and increase torque to removing the bolt. Deep Counter-Weighted Socket --- Reduce the impact losses commonly found in standard socket, allowing break the stubborn crank bolt loose easily. What You Get -- 1 x 19mm crank bolt socket 1 x 50mm Crank pulley holding tool. This compatible with Honda Crank Pulley Tool Set is specially designed for crank bolt removal and installation.. Satisfaction Guarantee --- If you're not 100 satisfied with this 19mm weighted socket 50mm crank pulley holding spanner, simply return it for a full-refund in 30 days. Premium Support 1-Year Warranty.

Our products are engineered with market-exclusive glass fiber-reinforced nylon composite, delivering superior durability that resists breakage. As the professional manufacturer of this innovative design in the market, we prioritize precision and longevity to meet demanding automotive repair needs.. Compatible with VW Chrysler Jeep Dodge Grand Cherokee Wrangler. Replace for 10369A, 10200A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, 10200A3. And applicable for vehicles with the 3.6L engine.. You can use 10200-1 and 10200-3 on driver's side, use 10200-2 on passenger's side. 10369A is used for 2012 and newer models. If that bolt head is 13MM, some 2011 models may also require 10369A.. The phaser locks are used for hold the phasers in place during adjustments or removal. And 10202 is used to hold the camshaft and phaser, while performing the loosening and tightening of the oil control valves 10200A is used as wedges to loosen the tension on the timing chains when camshaft and phaser service on Routan 3.6L engine.. Convenient to carry and operate Camshaft Phaser Timing Chain Tool kit comes with 2 x Camshaft Tensioner Locking Pin, 3 x Timing Chain Holders, 2 x Phaser Locks, 1 x Portable Case.

Premium Material These camshaft alignment tools are made of high-quality steel, sturdy, strong and stable, rustproof, not easy to deform. Designed to lock the cams and crankshafts in order to allow disassembly and replacement of timing chains adapted at the Vauxhall Opel Chevy engine. Make sure the chain tensioner is completely retracted and held in the retracted position using the suitable pin.. Packing List The engine timing tool kit includes crankshaft locking pin, camshaft setting plate, camshaft sensor setting tool x 2, camshaft sprocket holding tool, chain tensioner locking pin x 2 and a portable case with a pair of gloves.. Wide Compatibility The engine timing tools are compatible for Vauxhall Opel, Adam 1.2 1.4 2012- , Ampera 1.4 2011- , Astra-J 1.4 2009, Aveo1.2 1.4 2011-, Corsa-D 1.0 1.2 1.4 2009-, Cruze 1.4 2011-, Cascada 1.4 2013-, Insignia 1.4 2011-, Meriva-B 1.4 2010-, Mokka 1.4 2012-, Orlando 1.4 2012-, Zafira-C Tourer 1.4 2011-. Engine Codes LWD, L2Z, LDD, LUUA14XFL, LDDA14XER, LDDA14XEL, LUJ114NET, LUJA14NEL, A10XEP, A12XEL, A12XER, A14XEL, A14XER, A14NEL, LUJA14NET, LDDA14XER, LUJA14NET, LUHA14NEL, LUJA14NET, LUJA14NEL, L2QA12XEL, LDCA12XER, LWDA12XEL, LDDA14XEL, LDDA14XER, LWDA12XEL, LDDA14XEL, LDDA14XER. Service Assurance If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..

Upgraded Version Wide CompatibilityCamshaft Crankshaft Engine Timing Tool Kit is an improved suite, featuring two additional sockets for enhanced functionality. Equipped to service the 2006-2018 EA888 1.8 2.0 TSi TFSi engines, it's an ideal fit various models for Audi A3, A4, A5, A6, Q5, TT Allroad, for VW Beetle, EOS, GTI, CC, for Jetta, for Passat B6, for Tiguan, for SEAT, Magotan, Sagitar, Phideon, Teramont, etc.. OEM Part NumberT10352, T10352-1, T10352-2, T10352-3, T10352-4, T10355, T10368, T40196, T10060A, T40011, T40266, T40267, T40271,T40265. Engine Code BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB. High Quality Precise TimingEA888 Engine timing tool kit for AUDI expertly designed to adjust the camshaft and crankshaft timing, simplifies your maintenance work. Made with high-hardness materials for durability, it resists breakage, ensures prolonged use, and comes with a handy travel case for convenience. Trust this tool for precision and ease.. Parcel Content - 1 Crankshaft Holding Wrench, 1 Locking pin of oil pump tightener, 2 Tensioner Locking Pins, 3 Set Camshaft Adjuster Control Valve, 1 Timing Chain Press Cover Piece, 1 Camshaft Adapter Socket 2 Locking Pins, 1 Locking Pin 1 Crankshaft Seal Tool, 2 Camshaft Locks 4 Camshaft Pins.

Lock, Align, Save Time Orion Motor Tech's 1.4 turbo timing kit holds your engine at TDC with OEM-standard timing tools. Complete chain replacements or cam adjustments effortlessly with up to 90 less labor. One-Stop Timing Solution Stop hunting for tools This comprehensive engine camshaft alignment kit includes camshaft and sensor setting tools, adjustment tools, and locking pins, giving you everything needed to tackle timing repairs accurately. Fits Most Popular Cars This engine timing tool kit is compatible with 1.2L 1.4L Chevrolet Aveo, Cruze, and Orlando, as well as 1.0-1.4L Vauxhall Opel models including Adam, Ampera, Corsa D, Cascada, Insignia, Meriva B, Mokka, and Zafira C Tourer. Built to Last a Lifetime Crafted from heat-treated 1045 carbon steel for 30 more hardness, these timing chain tools stay strong under heavy engine work. The zinc-plated finish delivers 3x the wear resistance for years of dependable performance. Snap It Back and Go Our blow-molded carry case with custom slots keeps every timing tool secure during transport, protects them from movement, and lets everything snap back perfectly after each repair in just 5 seconds.

Comprehensive SetThe 3.6L Pentastar timing kit includes 9PCS 3 timing chain retainers, 2 phase lockers, 1 camshaft tensioner lock pin, 2 camshaft fixing tools, and 1 crankshaft belt wrench.. Wide Compatability The timing chain lock tool kit compatible with most 2011 to 2019 3.6L Pentastar engine Volkswagen, Jeep, Grand Cherokee, Wrangler, Chrysler, and Dodgenot compatible with VVL engines.. Practical UseThe crankshaft phaser timing chain tool can adjust and replace the timing chain the crankshaft fixing tool can fix the core rotating shaft of the engine when disassembling or assembling, preventing it from rotating accidentally the crankshaft pulley wrench can disassemble and assemble the crankshaft pulley at the front of the engine.. Alternative Original Part Numbers10369A, 10200A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, 10200A3, 10198A, 10369, 2025200090. If these numbers were seen during previous repairs, this timing tool kit can perfectly match.. Quality BuildThe heavy-duty camshaft timing tool kit features excellent hardness and accuracy, is durable, highly practical, offers better cost-effectiveness for DIY repairs, and is equipped with a sturdy storage box for easy organization and storage..

Precision Camshaft Retaining ToolDesigned to deliver accurate engine-timing alignment, this tool securely locks the left and right camshafts at TDC to prevent rotation and misalignment. It acts as a reliable GM high-feature V6 cam-holding tool, simplifying timing chain service and top-end repairs while ensuring consistent, professional-grade results.. Made for GM HFV6 EnginesEngineered as a direct-fit replacement for EN-46105 EN-48383, this camshaft retaining tool matches the slot geometry of GM high-feature V6 engines, including 2.8L, 3.0L, 3.6L, and 3.6L VIN 7 applications. Compatible with Cadillac, Buick, Chevrolet, Pontiac, Saturn, and GMC models. Please verify engine and model year for proper fitment.. Professional Shop PerformanceDesigned to work seamlessly with timing chain kits, cam phasers, and OE repair procedures, this camshaft retaining tool delivers dependable stability during timing-related service. Whether used in a professional workshop or a home garage, it securely holds camshafts in place, helping technicians perform engine repairs faster, safer, and with greater precision.. Wide Vehicle ApplicationFits a broad range of GM vehicles such as CTS, SRX, STS, Acadia, LaCrosse, Enclave, Aura, G6, Outlook, VUE, Torrent, Malibu, Equinox, Camaro, Traverse, and Rendezvous. Ideal for timing chain replacement, camshaft retention, and cylinder head service on supported V6 engines.. Durable Trusted Crafted from premium alloy steel, this tool provides rigid camshaft locking without bending or deformation. Recommended by professional mechanics and widely used by dealership technicians and skilled DIYers. An excellent cost-effective solution for owners of GM 2.8L3.6L V6 vehicles who prefer to perform timing service themselves without relying on dealership-only tools..

Application Compatible with Ford 3.5L EcoBoost upgraded engine. Compatible with Ford GT 2017-2019 Expedition 2018-2019 F-150 2017-2019 Lincoln Navigator 2018-2019 equipped with 3.5L EcoBoost upgraded engine.. Socket This kit include RT11 cylinder head screw removal socket, the socket head is wide-sided hexagonal plum, with 12-Inch drive, use for remove cylinder head screw, this socket compatible with Ford 3.5L 3.7L engine.. OEM Equivalent Part Number 303-1655. With high precision and great compatibility, as accurate as the OEM.. Tips 3.5L EcoBoost engine have two model, 3.5L 4V is old style, 3.5L V6 is upgraded. this tool only fit 3.5L V6 EcoBoost upgraded engine, not fit fit 3.5L 4V engine. if your car is 3.5L 4V engine, you need choose 303-1248.. Customer service If there is any problem with our products, you can get help from us. Customer satisfaction is our top priority..

Application Compatible with Ford 3.5L EcoBoost upgraded engines, including Ford GT 2017-2019, Expedition 2018-2019, F-150 2017-2019, and Lincoln Navigator 2018-2019.. RT11 Cylinder Head Screw Removal Socket Includes a RT11 cylinder head screw removal socket compatible with Ford 3.5L and 3.7L engines.. Must-Have Tool for 3.5L EcoBoost Timing Designed to hold the camshaft for timing during the replacement of the timing chain.. Easy to Use Extended camshaft hold plate ends allow for easy placement across the head to hold the cam still. OEM equivalent part number 303-1655.. Durable and Convenient Packaging Made of high-quality steel, each hold plate weighs 1.98 pounds and is not easily bent. The tool comes in a sponge-lined box for added protection during storage and transport. We offer a 12-month warranty and will refund or replace any tool with quality issues..

Application Compatible with GM 2.0 2.4 Ecotec Buick Chevrolet Engine. Compatible with Opel Astra J OPC 2012- Insignia 2008- Antara 2011-2012. Compatible with Chevrolet Malibu 2012- Captiva 2011- HHR 2008-2009. Compatible with Ecotec 2010 Buick LaCrosse, 2010 GMC Terrain 2.0L 2.4L ECOTEC SAAB 9-5.. Fit Engine Code 2.0 LHU A20NFT2.0 E85 LHU A20NFT 2.0 SIDI Turbo LTG A20NHT 2.0 Turbo LDK A20NHT 2.0 Turbo LHU A20NFT 2.4 A24XE LE5 2.4 LE5 LE9 2.4 LE9 2.4 LE5. Function The camshaft locking tool kit is used to torque cam to pulley bolt on GM Ecotec 2.0 2.4 engines, the water pump holder tool can perfectly hold the sprocket in place when replacing water pump.. Material The engine camshaft alignment timing tool kit is made of high-quality alloy steel. Its strength and size are very good. It has high strength, corrosion resistance, long service life, high-precision structure, and it can perfectly fit your vehicle.. Service If there is any problem with our camshaft locking tool kit, you can get help from us. Customer satisfaction is our top priority..

ApplicationThis tool has a wide range of applications,It can be used to replace the timing belt, replace the cam seal, remove the cam gear, install the camshaft pulley and so on. It is also suitable for diesel fuel injection pump or water pump. Fit forSuitable for most models, all models have sprocket holes larger than 12 mm 1 2 and hole spacing from 19 mm to 190 mm 3 4 - 7.5 . Compatible with Ford, Dodge, GM, Nissan, Mazda, Toyota, Volvo, Honda, etc. Excellent designMade of high quality and strong steel. Make your camshaft sprocket firmly fixed in the required position without bending. The anti-skid design is made at the handle to provide you with enough leverage during use, so that you can easily hold the pulley when tightening or loosening the fixing bolt.. AdvantageThe utility model has the advantages of multi-function, long service life and complete functions. It has no more interference. The screw driver is tightly fixed on the nut and bolt which are difficult to rotate through the gear, so there is no need to worry about damage in the process of use.. Package includes1 PCS cam pulley holder.

OEM Adapter-303-1511-02,Alignment tool, camshaft 303-1685,Holding tool, camshaft-303-1686 ,Installer, VCT solenoid seal-303-1687, Preload tool, balance shaft-303-1688 , Holding tool, crank damper-303-1689. Applications 303-1685 compatible with FORD 2.0L 2.3L ECOBOOST from 2019,compatible with FORD EDGE 2.3L, compatible with FORD RANGER 2.3L, compatible with LINCOIN 2.0L 303-1685 compatible with FORD 6.0L 6.4L diesel engine, compatible with FORD E150 E250 E350 E450 F250 F450 F550 F650750 with 6.0L 6.4L diesel engine. FunctionCrankshaft damper holder balance shaft preload tool vct solenoid seal installer,Use for aligning or holding the camshaft in right position, holding the crankshaft damper, when replace. This kit include camshaft alignment tool camshaft holding tool vct solenoid seal installer balance shaft preload tool crankshaft damper holding tool adapter tool.. Service and Warranty Backed by a two-year warranty, this kit also includes detailed instructions and diagrams, providing comprehensive support for all your technical needs..

FunctionCam sprocket holding tool used to secure camshaft gears, injection pumps, other gears and pulleys, and for loosening and tightening bolts on cam pulleys.Its essential tool called for on many timing beltengine timing application.. High Performance made of high quality steel, high hardness, corrosion resistance, not easy to rust. Rubber wrapped at the handle for anti-slip effect. Perfect for the job, can easily tighten or loosen the fixing nuts and bolts.. FeaturesCamshaft sprocket retaining tool, heavy duty steel design. Used to hold the camshaft or injection pump sprocket in place to release the retaining bolt. Can be used as a reverse bracket when loosening or tightening sprocket retaining bolts.. DesignAdjustable design with nut adjustment for most cam and injection pump gear sizes. Pivot design is suitable for any type of gear.. ApplicableWorks on models with sprocket holes larger than 12mm 12 hole separations from 19mm to 190mm 34-7.5.Can be used for universal OHC engines.Useful on most Asian overhead cam engines..

Extended Handle DesignOur extended handle is longer than others in the market, it makes the job easier. Great camshaft sprocket tool for timing belt changes, cam seal replacement, cam gear removal, and camshaft pulleys installation. Also works on a diesel injection pump or water pump.. Adjustable Arm DesignAdjustable arm design fit the sprocket hole from 1-12 to 8-58. EWK camshaft sprocket tool provides the maximum working range in the market.. 4 Size hold Pin4 different size hold pins 6-10mm 0.24-0.39 in, 8-11mm 0.31-0.43 in, 10-12mm 0.39-0.47 in, 11-16mm 0.43-0.62 in. They can be applied to most of the camshaft pulleys in the market.. Heavy DutyPremium steel and strengthened heat treatment provide the heavy-duty class tool. Highly recommended by professional mechanics. 126 MonthDurable products backed by an extraordinary 126 months warranty..

- Fitment Compatible with 1997 - 2002 4.6L Windsor V8 Econoline and F series trucks 1997 - 2002 5.4L V8 Econoline expedition and F series trucks 1997 - 2002 6.8L V10 Econoline and 1998 - 2002 5.4L V8 Lincoln Navigator.. -Usage When repairing the timing belt chain head gasket or other valve mechanism repairs, the camshaft fixing tool can ensure the correct cam timing.. - Kindly Note Some applications require multiple tools to complete tasks. They would be a good choice.. - Provide your machine with the new power and torque it really deserves, and bring more fun through the power of your fingertips.. - Package Included 2pcs Camshaft Holding Tool.------If you are not satisfied with our products, just ask for a money-back guarantee of 12 months warranty. Don't worry about buying.

Fitment Designed for Cadillac ATS 2013-2014, Cadillac CTS 2014, Chevrolet Malibu 2013-2014, 2014 Chevrolet Impala Buick Regal 2.0L and 2.5L engines.Similar to EN-50656.. This Timing Chain Holding Tool features its sturdy construction, ability to withstand a lot of pressure, wide applicability and long service life.Constructed from superior quality heat-treated steel with black powder coating to resist corrosion.. Great Performance This holding tool retains the timing chain position relative to the crankshaft position. The tool clamps around the timing chain pins on both the intake and exhaust sides of the cylinder head, which makes it easier to service the cam.. Package includes 1 Timing Chain Holding Tool.. Premium Service If you have any problems, please contact us..

Effortless Engine Maintenance Simplify your timing chain repairs with the CENFORGE Camshaft Holding Tool Kit, expertly designed for Ford 3.5L 3.7L 4V engines. This kit allows for precise positioning and alignment of camshafts at TDC, ensuring efficient removal and installation of timing chains.. Perfect Fit for Ford V6 Cyclone Engines Tailored for compatibility with a wide range of Ford models, including the Edge, Explorer, F-150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Lincoln MKS, MKT, MKX, MKZ, Navigator, Mercury Milan, Sable, and Taurus X.. Premium Quality Construction Crafted from high-grade steel and finished with a durable black oxide coating, our tools are rust-resistant and wear-resistant. Designed for high hardness and precision, they deliver exceptional compatibility and reliability for all your engine maintenance needs.. Portable Storage This comprehensive kit includes 2 camshaft holding tools, a camshaft phaser bolt removal socket, a chain tensioner holder tool, and 3 crankshaft blocking pins OEM 303-507 303-574 303-748 with portable case, The lightweight design makes it easy to carry and store, keeping your tools organized and accessible.. 100 Customer Satisfaction Guaranteed Your satisfaction is our priority If you have any issues or are not fully satisfied with our product, our dedicated support team is ready to help. Shop confidently, knowing were committed to ensuring your happiness with every purchase..

Fitment Replacement for Ford V6 3.5L 2007-2016, replacement for non-turbo 2017, replacement for V6 3.7L 2009-onwards. Package Include 2pcs camshaft holding tools, 1pcs tension tool. Material Made of high standard structural steel, not easily damaged, with a long service life. Function Mainly used to ensure camshaft alignment during removal, installation and timing chain. Note Make sure that the part number matches your needs before purchasing, so you can have a better shopping experience.

Compatible with Many Ford 3.5L 3.7L Engines such as Ford Edge, Explorer, F-150, MKX, MKT, MKZ, Mustang etc.. Made of high standard structural steel , durable, black oxidation surface, excellent anti-corrosion and anti rust performance, long service life.. With excellent design, this tool provides you with enough space for easy holding and installation. After use, take out quickly, and maintain the camshaft of your car in the designed place for maintenance.. The kit includes 2 Camshaft Holding Tools and 1 Tension Tool. Please check whether your model is suitable for our products before purchase.

?Made of high-quality steel plate to hold on at the camshaft TDC position to ensure proper timing during do the cam, gear, chain work to prevent rotation. Make engine work effortless. ?work for Chevrolet Colorado GMC In-line 6 Cylinder 4.2L 3.5L 2.8L 4 Cylinder2004-2006 Chevrolet Colorado 2.8L2004-2006 GMC Canyon 2.8L2002-2004 Oldsmobile Bravada 4.2L vin S2004-2006 Buick Rainier 4.2L vin S2002-2008 Chevrolet Trailblazer 4.2L vin S2002-2006 GMC Envoy 4.2L vin S2004-2006 Chevrolet Colorado 3.5L vin 5 5 cylinder2004-2006 GMC Canyon 3.5L vin 5 5 cylinder2007-2012 2.9L GMC Canyon2007-2012 2.9L Chevy Colorado2007-2012 3.7L GMC Canyon2007-2012 3.7L Chevy Colorado.. ?Greatly Work Same as KMJ44221OTC-J-44221. ?PACKAGE INCLUDED 1 X Camshaft Holding Tool..

Camshaft holding tool timing alignment holder tool kit Replacement for Ford V6 3.5L 3.7L. Helps ensure camshaft alignment during removal and installation of the timing chain. Replacement for 3.5L engine 2007 to 2016 Replacement for non-turbo 2017 Replacement for 3.7L 2009 to present. Easy to install, simple operation. Includes holding tool for secondary chain tensioner.

Function Use this tool with appropriate service procedures when servicing vehicles equipped with the 3.6L Upgrade PHEV Engines.. Applications Compatible with 2016 WD - Systems 9 - Engine, 3.6L Compatible with 2017 R9, RU, WD, WK - Systems 9 - Engine, 3.6L Compatible with 2018 JL, WK - Systems 9 - Engine, 3.6L Compatible with 2019 DT, JL, WD, WK - Systems 9 - Engine, 3.6L. OEM Equivalent Part Number 2025200090. Premium QualityMade from high-quality metal, this tool is known for its durability and is an invaluable tool for professional mechanics and DIY enthusiasts who want to install fuel injector seals accurately and efficiently.. About Us We will continue to innovate and perfect our products based on customers needs and advice. If you receive a wrong, damaged product, or encounter any problems, please contact me..

COMPLETE KIT Orion Motor Tech's 3.6 Pentastar timing tool kit includes 3 timing chain holders, left and right phaser locks, and a camshaft tensioner locking pin to securely hold every part in place as you service your vehicle's timing system. PRECISE ALIGNMENT This camshaft holding tool set can be used on both driver's passenger's sides and left right banks, perfectly replacing those with part number 10200A, 10202, 10369A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, and 10200A3. WIDE COMPATIBILITY This versatile camshaft phaser timing chain lock tool set is compatible with a wide range of 2011 to 2019 Chrysler, Dodge, Jeep, and Ram 3.6L Pentastar engines with VVT systems incompatible with VVL engines. QUALITY BUILD Our heavy-duty camshaft timing tools are made from durable polypropylene to provide superior wear and corrosion resistance for resilient service. EASY PORTABILITY These camshaft locking tools by OMT come with a rugged blow-molded case, keeping everything organized and easy to store or transport between jobs.

Fitment The Universal Cam Pulley Holder works on many Camry, Toyota, Nissan, Mazda, OHC and many others. The Harmonic Damper Pulley Holding Tool work on Lexus 1990 and later 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8. Toyota 1996 and later 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. 4 cyl 1983-1995 22RE, 1995-2004 2RZ 1995-2004 3RZ.. Harmonic Damper Pulley Holder Prevent the harmonic damper pulley from rotating in the process of removing and setting the final torque specification on the pulley bolt, allowing users to easily remove and install the crank bolt on many Toyota Lexus engines.. Cam Pulley Holder Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc. Designed with grooved pins to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tighteningloosening the bolt.. SUPERIOR QUALITY Made of high quality steel with black finish for durability and perfect match, resisting rust and corrosion, ensures a long term service..

WIDE COMPATIBILITY The cam pulley holder is compatible with Toyota Camry Nissan Mazda OHC and many others. Universal, also suitable for injection pump, other hears and pulleys.. EXCELLENT FUNCTION This universal camshaft pulley holder toolis an ideal holding tool for timing belt changes, cam seal replacement, cam gear removal and camshaft pulleys installation etc.. OUTSTANDING DESIGN The camshaft pulley holding tool designed with grooved pins uses to hold the camshaft pulley stationary to stop it from spinning while tightening or loosening the bolt.. SUPERIOR MATERIAL The camshaft pulley holder tool is made of durable steel construction with precision cutted and meticulously welded. With non-slip rubber grip, safe and comfortable.. SATISFIED GUARANTEE Aiming to give our customers the best products and services, we provide friendly 1-years warranty support and easy-to-reach Customer Service to make sure your investment.

ENGINE TIMING TOOL KIT Does your Chevrolet, Fiats or Alfa Romeo engine feel unstable or have weak acceleration Use these tools to fix camshaft tensioner or other parts in the motor, and then check or replace parts.. PREMIUM MATERIAL Orion Motor Tech parts are made with high-quality corrosion resistant materials with maximum durability and strength, getting your engine running like new. The different parts are made of heat-treated carbon steel and chrome with a powder metallurgy camshaft gear lock.. APPLICABLE ENGINES Our alignment locking tools are compatible with a large range of engines including Chevrolet, Fiats and Alfa Romeo 2003 - 2012 16V 1.6 1.8 engine. Also fits Chevrolet Cruze, Orlando 1.4,1.6,1.8 and Fiat Croma, Alfa Romeo 159 with 939A4.000 engines.. STRICTLY TESTED For quality assurance, our parts have been rigorously tested to improve efficiency and provide the highest-grade tools on the market. Look to Orion Motor Tech for the finest craftsmanship and the most reliable parts that will fix your engine in no time.. EASY TO USE This engine timing tool kit is equipped with a step-by-step user manual for quick and easy application. Includes 1 Camshaft locking tool, 2 Camshaft gear locking tools, 1 Flywheel locking tool, 1 Engine Tensioner spanner, 1 V-ribbed belt tensioner locking tool, 1 Crankshaft locking tool, 1 Timing belt tensioner locking tool, 1 Blow molded tool case and 1 user manual..

Packing lists This kit includes 2 X 303-1248 Camshaft Holding Tools, 1 X Tension Tool, 1 X Tool of Removing Camshaft Screw and a pair of gloves. It comes with a portable case, which is convenient to carry and store. High-quality Material The Timing Alignment Holder Tool is machined from A3 steel and coated with black oxide. This makes it rust - resistant and wear - resistant, effectively ensuring the accuracy of vehicle maintenance and protecting relevant components. Intended Use Uprimu camshaft holding tool kit could accurately position and simplifying your timing chain work.Designed for Ford 3.5L 3.7L 4V engines, it accurately positions and aligns camshafts at TDC for efficient repairs during timing chain removal and installation. Vehicle Fitment 20072014 3.5L Edge 20112014 4.0L Edge 20112014 3.5L Explorer, F-150 20112014 3.7L F-150, MKX 20112012 4.0L F-150, MKX, Mustang 20122014 3.5L Flex 20102012 3.5L Fusion Hybrid 20072011 3.5L Milan 20102014 3.5L MKS, MKT 20092014 3.7L MKS 20102014 3.7L MKT 20072012 3.5L MKX, MKZ 20132014 3.7L MKZ 20112014 3.7L Mustang 20082012 3.5L Sable 20082014 3.5L Taurus, Taurus X. Cylinder Head Screw Removal Socket Fit for remove cylinder head screw, with hexagonal plum and o-ring bottom design that allows the socket to grip the solid wall of the fastener head, reducing wear.

Fitment for Honda Civic Si 2002-2015, for Honda Accord 2003-2013,2015-2017, for Honda Element 2002-2011, for Honda Crv 2002-2016, for Acura Tsx 2003-2014, for Acura Rsx 2002-2006, for K20A, K20Z, K24A, K24Z Engines 2.0L - 2.4L Cylinder Heads.. Part Number 07AAB-RWCA120.. Easy to Use This camshaft alignment tool pin tool can be easily inserted into the camshaft plate, which makes it easy to hold the end of the camshaft in place so that the chain does not skip a tooth when the tensioner is installed.. Function This cam lock tool helps you line up and hold lock the cams while you are working on the engine for good timing chain alignment each time.. Material Camshaft tool lock tool pin tool is made of metal for durability and long service life. Correct connectors, no cutting or splicing required.

Material Cam Pulley Holder Tool is made of high quality steel ,which has excellent anti rust and anti-corrosion properties and is firm and powerful.. Excellent design The handle is made of rubber, safe and comfortable. The red handle is anti-skid, which helps you use the tool more conveniently.. FunctionThis tool can help you better fix the camshaft sprocket and remove or tighten the bolts to improve your work efficiency.. ApplicabilityWide range of applications, compatible for NissanToyotaOHCCamryMaximasV6It can be used to replace timing belt, replace cam seal, remove cam gear, install camshaft pulley, etc.. Please check whether your model is suitable for our products before purchase.

Fitment This Camshaft Holding Tool Timing Alignment Holder Tool Set with Chain Tensioner Replacement for V6 3.5L 3.7L.. Features Made of quality material, very strong and practical, high performance, long service life.. Features Helps ensure camshaft alignment during removal and installation of the timing chain.. Package Includes 1x camshaft holding tool and chain tensioner set as picture shown.. Note Please check the car model and year carefully before ordering..

Sturdy Material Chrome vanadium alloy steel forged to HRC50-55 hardness and strengthened by heat treatment process to ensure safety when removing camshaft pulleys. Excellent Compatibility Equipped with variable pins from 3.5mm to 10mm that are compatible with most camshaft and crankshaft pulleys. Adjustable Wrench Ensures a tight and secure grip on pulleys by adjusting its size via a swivel mechanism from 1-14 to 5 32-127mm. Enhanced Reach This 12-inch 30.5cm pin wrench effortlessly connects to a standard 12-inch drive ratchet or breaker bar to tackle even the most stubborn pulleys. Packing List The spanner wrench set includes 14 high-strength steel pins 7 sizes, a 12-inch long pin wrench, and a plastic carrying case for easy storage and transportation.

Precision Engineered for Safety Efficiency Hold the camshaft holding tool at the TDC position to ensure proper timing during do the cam, gear, chain work to prevent rotation. It reduces the risk of engine damage and saves valuable time during repairs.. Wide Compatibility As a direct replacement for J-44221, it is compatible with 2004-2006 Chevrolet Colorado 2.8L, 2004-2006 GMC Canyon 2.8L, 2002-2004 Oldsmobile Bravada 4.2L vin S2004-2006 Buick Rainier 4.2L vin S, 2002-2008 Chevrolet Trailblazer 4.2L vin S, 2002-2006 GMC Envoy 4.2L vin S, 2004-2006 Chevrolet Colorado 3.5L vin 5 5 cylinder, 2004-2006 GMC Canyon 3.5L vin 5 5 cylinder, 2007-2012 2.9L GMC Canyon, 2007-2012 2.9L Chevy Colorado, 2007-2012 3.7L GMC Canyon, 2007-2012 3.7L Chevy Colorado.. Wear-Resistant and Precision-Built Forged from black oxide-coated structural steel, this camshaft holding tool resists abrasion. And it undergo precision machining to maintain tight tolerances, ensuring repeat accuracy across multiple uses.. Effortless Operation The camshaft holding tool features a one-piece design for assembly-free use. Its precision-engineered teeth are tailored to exactly match the contour of the engine camshaft end, enabling the tool to engage seamlessly with the dedicated slotswithout the need for angular adjustment.. Please kindly confirm more compatibility details before purchase..

PERFECT FITMENT Works on all models with sprocket holes larger than 12mm 12 hole separations from 19mm to 190mm 34-7.5, such as Audi, Dodge, Ford, GM, Honda, Mazda, Rover,Toyota, Volvo and so on. EXCELLENT DESIGN Made of high quality steel for durability and perfect match, non-slip rubber grip. Long handle enables technician to easily hold the pulley when tightening or loosening retaining nuts and bolts. FUNCTION This holding tool is used to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts.. A MUST HAVE TOOL Detent grooves on holding pins gives user a sure hold to use as a counter holder when loosening or tightening sprocket retainer bolts.

Use this toolaccurately position and align hold your Ford 3.5L 3.7L camshaftTDCperform service.. Helps ensure Camshaft alignment during removal and installationthe timing chain.. Vehicle Fitment20072014 3.5L Edge 20112014 4.0L Edge 20112014 3.5L Explorer, F-150 20112014 3.7L F-150, MKX 20112012 4.0L F-150, MKX, Mustang 20122014 3.5L Flex 20102012 3.5L Fusion Hybrid 20072011 3.5L Milan 20102014 3.5L MKS, MKT 20092014 3.7L MKS 20102014 3.7L MKT 20072012 3.5L MKX, MKZ 20132014 3.7L MKZ 20112014 3.7L Mustang 20082012 3.5L Sable 20082014 3.5L Taurus, Taurus X. Coated with black oxide for extended tool life,machined from A3,whichhard and durablehelps ensure vehicle maintenance accuracy and protection..

Product Type Auto Part. Package Quantity 1. Package Dimensions 11.0 L x 3.25 W x 0.25 H. Country Of Origin United States.

FITS For LS1 for LM7 for LR4 for LQ4 for LS6 for L59 for LQ9 for LM4 for L33 305 327 350 383 SBC BBC 5.0L 5.7L V8. FUNCTION The 6, 6, 6 in, 6 inch aluminum handle keep from damaging your bearings by using this camshaft. Compatible with for Chevy, Small block, big block with 3-bolt pattern. NOTE Will not fit Gen 4 VVT camshafts.

Compatible with Ford, GM, Honda, Mazda, Nissan, Rover, Toyota, Volvo,Audi, Chrysler, Dodge .... Fit for all models with sprocket holes larger than 12mm 12 hole separations from 19mm to 190mm 34-7.5. Material Made of high quality steel for durability. Long handle with non-slip grip provides enough leverage and enables you to easily hold the pulley when tightening or loosening retaining bolts. no harm to your hand . Using this sturdy tool to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tighteningloosening the bolt. Package included 1pcs Camshaft Pulley Holder Tool . 100 Satisfaction service If you are not satisfied with the product, feel free to reach out to us, and our service team will do their best to fulfill your needs..

Superior Grip This automotive tool set slots in perfectly to hold your camshaft firmly in position at top dead center just like OEM sets EN-46105 and EN-48383. Superior Strength These camshaft alignment tools are made from high-quality 45 structural steel for maximum strength and endurance. Superior Durability Our steel is galvanized with a zinc coating for improved longevity and corrosion resistance. Fits 2.8L, 3.0L, and 3.6L V6 engine codes LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, and B284L. Versatile Use These tools are compatible with GMC Acadia Buick Lacrosse Enclave, Cadillac CTS, SRX, STS Pontiac G6 Torrent Saturn Aura, Outlook, Vue Chevy Malibu, Camaro, Equinox, Traverse Saab 9-3, 9-4X, 9-5 Holden, Vauxhall, Opel.

Similar to EN-50656. Fit for 2013-2014 Cadillac ATS, 2014 Cadillac CTS. Fit for 2013-2014 Chevrolet Malibu. Fit for 2014 Chevrolet Impala Buick Regal 2.0L and 2.5L engines. 6746 Timing Chain Holding Tool.

Engine Service Tool Kit 2 Essential Tools in One SetThis Fits for ToyotaLexus crank pulley holding tool kit combines 1 a crankshaft damper pulley holding tool with 2 crank bolts and 2 a universal camshaft timing pulley holding tool, providing a complete solution for crank bolt removal, harmonic balancer service, timing belt, and cam gear repairs. One kit covers multiple engine service tasksno need to buy tools separately.. Crankshaft Damper Pulley Holding Tool Precise Fit for ToyotaLexus EnginesThe crank pulley holding tool is specifically designed to lock the harmonic balancer securely while loosening or tightening the crankshaft bolt.Fitment includes For Lexus1990 engines 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8 For Toyota1996 engines 3.0L 3.3L V6, 4.0L V6, 4.7L V8 4-Cylinder engines 22RE 19831995, 2RZ 3RZ 19952004.. Universal Camshaft Timing Pulley Holding Tool One Tool for Multiple EnginesThe camshaft pulley holding tool features an adjustable pin design that fits sprocket holes 12mm 12 with spacing from 19mm to 190mm 34-7.5.perfect for timing belt and camshaft service.. Heavy-Duty 42CrMo Steel Construction Built for High Torque Harsh EnvironmentsBoth tools are forged from heat-treated 42CrMo alloy steel, offering exceptional strength, wear resistance, and corrosion resistance. The black-coated finish protects against rust and chemical exposure, ensuring long-term durability even in professional workshop environments.. holding tool locks the crank pulley firmly in place, preventing dangerous rotation during crank bolt removal or final torque tightening. Eliminates the risk of stripped bolts, damaged pulleys, or timing misalignment.. No Radiator Removal Required Saves Time LaborThe crankshaft holding tool features a precision center access hole, allowing direct access to the crank bolt without removing the radiator or front-end componentssignificantly reducing labor time during engine service.. Ideal for DIY Enthusiasts Professional TechniciansWhether performing a timing belt replacement at home or daily engine repairs in a shop, This timing and crank pulley tool kit improves efficiency, safety, and precision on every job.. Warranty Support Buy with Confidence Includes 12-month quality warranty and 30-day money-back guarantee. Backed by a professional customer support team for worry-free service..

Cam Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs. 1997 - 2002 4.6L Windsor V8 Econoline and F-Series Truck. 1997 - 2002 5.4L V8 Econoline Expedition and F-Series Truck. 1997 - 2002 6.8L V10 Econoline and 1998 - 2002 5.4L V8 Lincoln Navigator-r. Same as Ford number 303-557 T96T-6256-B.

Complete Set Made Engine Service Easy Orion Motor Tech's engine timing tool kit includes camshaft and crankshaft alignment tools, a pretensioning tool, a counterholding tool, and necessary bolts to lock parts securely in place for easy engine service. OEM Equivalent for Precise Alignment Our camshaft holding tools fit both manual and automatic transmission vehicles, replacing part number 11 9 550, 11 9 54011 9 5500197-A1, 11 9 5400197-A3, 11 9 552, 11 9 340, 11 7 440, 11 9 590, 11 7 440, 49 6 709. Compatible with Multiple Models This engine camshaft alignment timing locking tool set works with N12, N13, N14, N16, N18, EP3, EP6 1.4L and 1.6L engines of a wide range of 2006 to 2015 BMW, Mini, Citron, and Peugot models. Strongly Built for Lasting Service Our heavy duty cam holder tools are made of premium galvanized and blackened carbon steel to resist wear and corrosion for dependable use. Customer Satisfaction Service If there is some problem with our camshaft holding tool kit, you can get help from us. Customer satisfaction is our top priority.

Features This car engine camshaft lock helps reduce the error of the engine timing system and improve the safety and reliability of the engine. The thread is smooth and tight, easy to adjust and tighten.. Easy to Use The shape and size of the tool matches the number of teeth and pitch on the sprocket or gear to ensure correct positioning and locking, ensuring that the sprocket or gear remains stable during installation.. Material This car engine cam locking tool is made of high-hardness plastic metal, with a sturdy and durable structure that can withstand the pressure of daily use, not easy to break, convenient for you to repair and replace, and improve work efficiency.. Warm Tips When using, rotate the engine according to the vehicle manufacturer's instructions to align the engine timing mark, and then apply the clamp. There is a raised anti-slip design on the back for effective locking.. Packing List After purchase, you will receive 1 dual camshaft fixing clamp, 4 mini camshaft fixing clamps and 4 hexagonal screw heads, which are enough to meet daily use needs. The tool is suitable for most single overhead camshaft, dual camshaft and quad camshaft engine camshaft locking devices..

Yuesstloo camshaft holding tool kit can help vehicle maintenance effectively and is easy to use, simplify your timing chain work. You can use it to accurately position and alignment for Ford 3.5L and 3.7L camshafts at the TDC to perform repairs during removal and installation of the timing chain.. Designed specifically for Ford V6 3.5L 3.7L Cyclone Engines. Compatible with Ford Edge Explorer F-150 Flex Fusion Fusion Hybrid Mustang Taurus Lincoln MKS MKT MKX MKZ Navigator Mercury Milan Sable Taurus Taurus X. Replace 303-1248 303-1530 OTC 6682. Comes with a portable case, includes 2 X Camshaft Holding Tools, 1 X Tension Tool, 1 X Tool of Removing Camshaft Screw and a pair of gloves. Convenient to carry and store.. Made of high-quality steel and coated with black oxide finish, anti-rust, wear-resistance and durable, with high hardness, high precision and great compatibility.. 100 CUSTOMER SATISFACTION GUARANTEE If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority..

Compatibility Compatible with VW Chrysler Jeep Dodge Grand Cherokee Wrangler. It is a replacement for OEM part numbers 10369A, 10200A, 10200A-1, 10200A-2, 10200A-3, 10202A, 10200A1, 10200A2, 10200A3. And applicable for vehicles with the 3.6L engine.. Convenient to carry and operate Camshaft Phaser Timing Chain Tool kit comes with 2 x Camshaft Tensioner Locking Pin, 3 x Timing Chain Holders, 2 x Phaser Locks, 1 x Portable Case.. Usage function During tightening and loosening the oil control valve on the Routan 3.6-liter engine, tool 10202 is used to secure the camshaftphase shifter, while during the camshaft and phase shifter repair program on the Routan 3.6-liter engine, tool wedge 10200A is used to loosen the tension on the timing chain. The tool with model 10369A is mainly used for models produced in 2012 and later.. Easy to store and use This toolbox set adopts a lightweight design and includes 7 tools. The toolbox is equipped with a card slot for storing tools that fit snugly. All tools are easy to use and store, neatly arranged and fixed in boxes for easy portability.. Correct Placement You can use 10200-1 and 10200-3 on driver's side, use 10200-2 on passenger's side. 10369A is used for 2012 and newer models. If that bolt head is 13MM, some 2011 models may also require 10369A.The phaser locks are used for hold the phasers in place during adjustments or removal. And 10202 is used to hold the camshaft and phaser, while performing the loosening and tightening of the oil.

Package Upgrades Includes 2 X Camshaft Holding Tool, 1 X Tension Tool, 1 X RT11 CRMO Impact Ribe Bit Socket and a pair of gloves.. INTENDED USE BETOOLL camshaft holding tool kit could accurately position and simplifying your timing chain work. Compatible with Ford 3.5L 3.7L camshaft at TDC to perform to perform repairs.. Cylinder Head Screw Removal Socket Fit for remove cylinder head screw, with hexagonal plum and o-ring bottom design that allows the socket to grip the solid wall of the fastener head, reducing wear.. Vehicle Fitment 20072014 3.5L Edge 20112014 4.0L Edge 20112014 3.5L Explorer, F-150 20112014 3.7L F-150, MKX 20112012 4.0L F-150, MKX, Mustang 20122014 3.5L Flex 20102012 3.5L Fusion Hybrid 20072011 3.5L Milan 20102014 3.5L MKS, MKT 20092014 3.7L MKS 20102014 3.7L MKT 20072012 3.5L MKX, MKZ 20132014 3.7L MKZ 20112014 3.7L Mustang 20082012 3.5L Sable 20082014 3.5L Taurus, Taurus X. High quality Timing Alignment Holder Tool coated with black oxide, machined from A3,which hard and durable helps ensure vehicle maintenance accuracy and protection..

HIGH STANDARD QUALITY Made of superior structural steel and coated with black oxide finish, it is an excellent solid plate, which is effective for rust and crack resistance with great toughness.. INTENDED USE Holding the camshafts at Top Dead Center to ensure proper timing when servicing cams, gears, chains, etc. and positioning over the ends of the camshaft to prevent rotation without disturbing timing. Also Known As KMJ44221, OTC-J-44221.. APPLICATIONFit for Chevrolet 1999 CAL V8 5665cc 5.7L 2005-2009 GM V8 5328cc 5.3L, 1999-2005 GM V8 5665cc 5.7L, 2005-2011 GM V8 5967cc 6.0L, 2008-2011 GM V8 6195cc 6.2L 1999-2011 GMT LD V8 4807 AVANTI, BUICK, CADILLAC, CHEVROLET, GMC, HUMMER, ISUZU, PONTIAC AND SAAB 4.8L, 5.3L, 6.0L, 6.2L, 7.0L OHV V8 16V VORTEC Valve Cover Gasket Kit. PACKAGE INCLUDED 1 X Camshaft Holding Tool..

Applicable Engine Compatible with FORD Duratec petrol engine 1.25, 1.4, 1.6, 1.7, 1.8, and 2.0 twin cam 16V, 2.3L, 2.5L engine compatible FORD Duratorg diesel engine 1.4, 1.6, 1.8, 2.0 TDCI compatible with FORD ECOBOOST 1.6 Ti-VCT, 1.51.6 VVT compatible with MAZDA PSA 1.4, 1.6HDI,1.8L, 2.0L, 2.3L. engine code 1.25 16V DHA, DHB, DHC, DHD, DHH, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB 1.4 16V ASDA, ASDB, FHA, FHD, FHE, FHF, FXDA C, FXDB D, FXJA, FXJB. Engine Code 1.6 16V FYDA C, FYDB D, FYJA, FYJB, L1F, L1J, L1L, L1N, L1O, L1T, L1V, L1W, HWDA, HWDB 1.7 16V MHA, MHB 1.8 16V EYDB, EYDC, EYDD, EYDE, EYDJ, EYDG, EYDI, EYDJ, EYPA, EYPC, RKA, RKB, RKF, RKH, RKJ, RKK 1.8 16V with control chain CDBB, CGBA B, CHBA B, CSDA, CSDB, QQDA, QQDB, QQDC 2.0 16V EDBA C, EDBB, EDBD, EDDB, EDDC, EDDD, EDDF, NGA, NGB, NGC, NGD 2.0 RS ST170 ALDA, HMDA 2.0 16V with control chain AODA, AODB, AOWA, CJBA B. OEM Equivalent Part Number This flywheel locking timing tool kit have 18pc tools, have everything you need for timing, replace OEM 303-1097 303-748 303-1550 303-1552 303-1054 303-1059 303-735 303-1552 303-393A 303-393-01 303-393-02 303-376B 303-651 303-193 303-507 303-734 303-732 303-xtra. Compatible with Vehicle for Focus 2004-2008 for Focus C-Max 2003-2008 for Mondeo 2007-2008 1.6 Ti-VCT 16V HXDA Diese engines for Duratorq Fiesta Courier 2000-2006 for Focus 1998-2006 for Focus C-Max 2003-2008 for Mondeo 2007-2008 for Tourneo Connect 2002-2008 for Transit Connect 2002-2008 for Fusion 2002-2008 for S-Max 2006-2008 for Galaxy 2006-2008 Compatible with 2012 Ford B-Max 1.4L Duratec-16V Compatible with 2015 Ford C-Max 1.5L EcoBoost. Fitment Vehicle Compatible with 2011 Ford C-Max 1.6L EcoBoost, 1.6L Duratec-16V Ti-VCT Compatible with 13 - 14 Ford Fusion 1.6L EcoBoost Compatible with 13 - 18 Ford Fusion 1.5L EcoBoost Compatible with 14 - 16 Ford Transit 1.6L EcoBoost Compatible with 03 - 05 Mazda MP 3.0L Compatible with 04 - 06 Mazda Tribute 2.0L, 2.3L, 3.0L Compatible with 04- 09 Mazda 3, 2.0L 2.3Lnot fit 2.3T the timing tool kit compatible with Ford and Mazda vehicles with a wide range of modern, there are many models have not been written. A Complete Kit This timing tool set includes 303-1097 camshaft sprocket locking tool, 303-651 camshaft sprocket puller, 303-507 303-748 flywheel pin, 303-372 cam sprocket pin, 303-735 camshaft timing pin, 303-1059 flywheel pin, 303-1552 camshaft setting bar, 303-393 flywheel locking tool, 303-193 camshaft tdc pin, 303-376b camshaft positioning plate, 303-1270 flywheel timing pin, 303-1054 timing belt tensioner, 303-1550 camshaft pulley alignment tool, flywheel locking adapter, 303-620 crankshaft timing peg, a portable case and instruction manual.

Fitment Cam Tool Complete Combo Set Compatible for timing chain or cam phaser work for your Ford 4.6L5.4L 3V V8 V10 Engines. Fits for Mustang, F-Series, Rotunda, Expedition, Lincoln Navigator, Explorer, Mark LT, Mountaineer, F-Series trucks and Tool set covers 1 cylinder head application.. Function Easy to replace timing kit-camshaft, cam pasher, crankshaft, timing chain and others.. Crankshaft Positioning Tool The crankshaft position tool can accurately fix the position of the crankshaft. Replace part Rotunda 303-448, T93P-6303-A, 6024, 525219. Compatible for Ford 1993newer 4.2L and 4.6L 2-valve engines, 1993newer 4.6L 4-valve engines, and 1993newer 5.4L and 6.8L V8 engines.. Cam Phaser Holding Tool Make easy camshaft or cam phaser changes on your vehicle without losing chain tension and without removing the timing cover. Works for Ford Rotunda 5.4L 4.6L 3V Expedition 5.4L 3V 2005-2011 Explorer 4.6L 3V 2006-2010 F-150 5.4L 3V 2004-2010 F-250350450550 5.4L 3V 2005-2009 Mark LT 5.4L 3V 2006-2008 Mountaineer 4.6L 3V 2006-2010. Replace 303-1046, OTC 567614, OTC 6681.. Timing Chain Locking Tool When doing camshaftphraser work, push down on this tool and wiggle to set it as deep as possible, then pull up a little the chain will come up with the tool, and you then have extra wiggle room for removing phasers. Works for Lincoln Mercury 2005-2014 vehicles with 5.4L and 4.6L 3V engines Navigator, Ford Mustang, F-150, Super Duty, F-250, F-350, F-450, F-550, Explorer, Mountaineer, Sport Trac, Expedition..

Lock, Align, Save Time Orion Motor Tech's 3.5 3.7 4V engine timing tool kit holds your engine at TDC with OEM-standard timing tools. Complete chain replacements or cam adjustments effortlessly with up to 90 less labor. One-Stop Timing Solution Stop hunting for tools This comprehensive engine camshaft alignment kit includes a chain tensioner holder tool, 3 crankshaft holding tools, camshaft holding tool, and a camshaft paser bolt removal socket, giving you everything needed to tackle timing repairs accurately. Fits Most Popular Cars This engine timing tool kit is compatible with Ford, Lincoln, and Mercury V6 engines, including Edge, F-150, Explorer, and Mustang. It replaces parts 303-1248 and 303-1530 and includes crankshaft pins 303-507, 303-574, and 303-748. Built to Last a Lifetime Crafted from heat-treated 1045 carbon steel for 30 more hardness, these timing chain tools stay strong under heavy engine work. The zinc-plated finish delivers 3x the wear resistance for years of dependable performance. Snap It Back and Go Our blow-molded carry case with custom slots keeps every timing tool secure during transport, protects them from movement, and lets everything snap back perfectly after each repair in just 5 seconds.

WIDE APPLICATION This camshaft holding tool kit is compatible for Ford 3.5L EcoBoost upgraded engine. Compatible with Ford GT 2017-2019 Expedition 2018-2019 F-150 2017-2019 Lincoln Navigator 2018-2019 equipped with 3.5L EcoBoost upgraded engine. USEFUL TOOL The camshaft holding tool firmly fix the parts in place and the phaser bolt removal socket quickly removes the damaged phaser bolt, facilitating your timing chain and belt replacement, phaser bolt change, water pump maintenance, more. KIT INCLUDES Comes with a portable case, includes 2 X Camshaft Holding Tools, 1 X Tension Tool, 1 X Cylinder Head Screw Removal Socket and a pair of gloves. PREMIUM MATERIAL This drive belt replacement kit is made of high hardness AISI 1045 medium carbon steel, heat-treated, sturdy and stability, corrosion resistant, wear resistant, with reliable use and long service life. AFTER-SALES DESCRIPTION If you have any questions about the purchased tool, please contact us in time, customers satisfaction is our top priority.

COMPLETE SET Camshaft retaining tool kit includes EN-48383-1 Seated to hold the left camshaft EN-48383-2 Seated to hold the left cam wheel EN-48383-3 Seated to hold the right camshaft. ACCURATE ALIGNMENT This camshaft locking tool set can hold your camshaft firmly in position at top dead center, perfectly replacing those with OEM number EN-46105 and EN-48383, for 2.8L, 3.0L, and 3.6L V6 engine codes LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, and B284L. WIDE APPLICATIONS This camshaft alignment tool set is compatible with GMC Acadia Buick Lacrosse and Enclave Cadillac CTS, SRX, and STS Pontiac G6 Saturn Aura, Outlook, and Vue Pontiac Torrent Chevy Malibu, Camaro, Equinox, and Traverse Saab 9-3, 9-4X, and 9-5 and some Holden, Vauxhall, and Opel models. BUILT TO LAST Our heavy-duty camshaft timing tools are made from premium AISI 1045 carbon steel with zinc plating for excellent abrasion and corrosion resistance, providing long-lasting service.

Crankshaft Positioning Tool Compatible for Ford 1993newer 4.2L and 4.6L 2-valve engines, 4.6L 4-valve and 5.4L6.8L V8 engines.Package included -- 1 pcs Crankshaft Positioning Tool -- 1 pcs Cam Phaser Locking Tool . Fitment Cam Phaser Locking Tool is similar to Rotunda 303-448, 6024, 525219. Compatible for Expedition 5.4L 3V 2005-2011 Explorer 4.6L 3V 2006-2010 F-150 5.4L 3V 2004-2010 F-250350450550 5.4L 3V 2005-2009 Mark LT 5.4L 3V 2006-2008 Mountaineer 4.6L 3V 2006-2010 4.6L 3V 2005-2010 Navigator 5.4L 3V 2005-2012.. Material Made of harden chrome molybdenum steel with black oxide finish resisting rust and deformation.. USAGECrankshaft Positioning ToolThis tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key. You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin, ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs.. Cam Phaser Locking Tool Designed with a triangle shape with four holes to perfectly fits for your cam phaser, it is a quite available accessory to make you do the phaser job with ease..

Wide Compatibility Both crankshaft damper pulley holding tool and cam pulley holder works on 3.4L V6 Engines compatible with Toyota 4 Runner 1996-2002, T100 pickup 1996-1998, Tacoma pickup 1996-2004 and Tundra pickup 2000-2004.. Universal Cam Pulley HolderThe W89208 Camshaft Pulley Holder also works on many V6 Engines VG30,3VZFE,1MZFE,etc compatible with Camry, Toyota, Nissan, Mazda, and other OHC engines. Designed to hold the camshaft pulley for removal and installation of camshaft bolts. It also an ideal holding tool for timing belt changes, cam seal replacement, cam gear removal and camshaft pulleys installation etc.. Harmonic Damper Pulley Holder The crank pulley holding tool can seat the pulley properly, prevent the harmonic damper pulley from rotating for the center bolt to be removed and setting the final specific torque on the crank bolt on 3.4L V6 engines. Heavy-Duty DurableThe holding tools are made of high quality-42CrMo Steel, heavy duty and durable, surface coated with black paint to ensure resistance to corrosion and rust, protection and years of trouble-free use.. Satisfaction Guarantee If you're not 100 satisfied with this Crankshaft Damper Pulley Holding Holder Tool Cam Pulley Holder W89208 , simply return it for a full-refund in 30 days. Premium Support 1-Year Warranty..

Compatible WithFor Audi, Dodge, Ford, GM, Honda,Mazda,Rover,Toyota,Volvo.... ApplicableWorks on models with sprocket holes greater than 12mm 1 2 and hole spacing of 19mm to 190mm 3 4 - 7.5 .. FeaturesCamshaft sprocket retaining tool, heavy duty steel design. The long handle provides sufficient leverage for fixing camshaft gears, fuel injection pumps, other gears and pulleys, and for loosening and tightening cam pulley bolts.. Superior MaterialMade of high-quality alloy steel, with oxide treatment on the surface, anti rust and anti-corrosion. The PVC handle is anti-skid and easy to clean without hurting hands.can easily tighten or loosen the fixing nuts and bolts.. After Sales1pcs Camshaft Pulley Holder Tool.1 year warranty provided..

FITMENT Fit for Nissan, Camry, Toyota, Mazda, OHC and many others please kindly check the size before purchase . MATERIAL Made of high quality steel for durability and perfect match, holding strong for both loosening and tightening cam pulley bolts. APPLICATION Great holding tool for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc.. A MUST-HAVE TOOL Using this sturdy?tool to hold camshaft sprockets stationary to remove the bolts, which will work well to hold the pulley to stop it from spinning while tighteningloosening the bolt. SATISFACTION GUARANTEE If you're not 100 satisfied with this Cam Pulley Holder, simply return it for a full refund in 30 days. Premium Support 12-Month Warranty.

Compatible with Toyota Camry, Nissan, Mazda and other OHC engines.. The grooved pin on the tool can better fix the pulley to prevent it from rotating.. Material made of high-quality alloy steel, with oxide treatment on the surface, anti rust and anti-corrosion. The PVC handle is anti-skid and easy to clean without hurting hands.. The long handle provides sufficient leverage for fixing camshaft gears, fuel injection pumps, other gears and pulleys, and for loosening and tightening cam pulley bolts.. Package Universal Cam Pulley Holder Tool X 1. Please check whether our products match your model before purchase.If you have any questions, please feel free to contact us and be happy to serve you..

Fitment Vehicle Fit Ford V6 3.5L 3.7L Cyclone Engines, for Ford Edge, Explorer, F150, Flex, Fusion, Fusion Hybrid, Mustang, Taurus, Police Interceptor for Lincoln MKS, MKT, MKX, MKZ, Navigator for Mercury Milan, Sable, Replace 303-1248 303-1530 OTC 6682. Exact Match This camshaft holding tool timing tool set designed specifically for Ford V6 3.5L 3.7L Cyclone Engines, high precision and great compatibility , and through rigorous engine testing, While is not a genuine original, it is a direct replacement and completely fit, better than spending 300 for a car factory brand tool. Material Made of high standard structural steel and coated with black oxide finish, it is excellent solid with great durability. Plus, it has good performance on rust and crack resistance to long-lasting service your engine. Professional Timing Tool This camshaft timing alignment holder tool work great holding the cams to do a water pump. easy to used and holds great.Use this tool to accurately position and align hold your 3.5L 3.7L camshaft at TDC to perform service. Lifetime Warranty We offer lifetime warranty, we will refund or replace, if the product have any quality problem.

EASY CAM ALIGNMENT Orion Motor Tech's camshaft holding tool set ensures accurate camshaft alignment so that you can service your vehicle's timing chain safely and easily. WIDE COMPATIBILITY These OEM equivalent timing chain tools are compatible with 5.4L F-Series Truck V8, 4.6L F-Series Truck Windsor V8, 4.6L Econoline Windsor V8, 6.8L Econoline V10, and 5.4L Expedition V8 from 1997 to 2002. DURABLE CONSTRUCTION Our heavy-duty camshaft holding tools are made with heat-treated premium carbon steel with wear and corrosion proof coating for superior strength and unmatched endurance. SIMPLE OPERATION These camshaft locking tools help you get job done quickly and conveniently simply loosen the bolts, take the clamp apart, install the tool around the camshaft, and that's it. FIRM PRECISE CLAMPING Each cam holder is constructed with exact size to let you screw up the bolts, applying even clamping force for a snug fit without an additional washer or gasket.

Compatible with 1997-2002 F-Series Truck 5.4L V8 Engines, 1997-2002 F-Series Truck 4.6L Windsor V8 Engines, 1997-2002 Econoline 4.6L V8 Engines, 1997-2002 Econoline 4.6L Windsor V8 Engines , 1997-2002 Econoline 6.8L V10 Engines, 1997-2002 Expedition 5.4L V8 Engines.. Replaces Part Number T96T-6256-B, 303-557Camshaft Holding Tool. 303-448, 6024, 525219Crankshaft Positioning Tool.. Package includes 2 Camshaft Holding Tool , 1 Crankshaft Positioning Tool.. Made of hardened chromium-molybdenum steel, the surface is covered by a black oxide layer, which has good rust and scratch resistance.. Camshaft Holding Tool Help ensure camshaft alignment when removing and installing timing belt chain head gaskets or other valve mechanisms. Rotate the crankshaft with the Crankshaft Positioning Tool to ensure that the engine is at the correct TDC point..

Made of high quality steel for durability and perfect match, non-slip rubber grip. Designed to hold camshaft gears stationary, injection pump, other gears and pulleys for both loosening and tightening cam pulley bolts. Made of high quality steel for durability and perfect match, non slip rubber grip.

Compatible with 1997-2002 F-Series Truck Windsor V8 4.6L 1997-2002 Econoline V8 4.6L 1997-2002 Econoline Windsor V8 4.6L 1997-2002 Econoline V10 6.8L. Replaces Part Number T96T-6256-B, 303-557.. UsageCamshaft Holding Tools ensure correct cam timing when servicing timing belts chains head gaskets or other valve train repairs.. Made of hardened chromium-molybdenum steel, the surface is covered by a black oxide layer, which has good rust and scratch resistance.. Packaging after sales 2pcs Camshaft Holding Tool. We offer a 30 day barrier free return policy. Please feel free to buy and use. Before leaving any feedback, please contact us to solve any problems in your use..