C STAND WITH WHEELS KIT PACKAGE INCLUDES 6Metal Swivel Caster,2C-Stand Base,2Holding Arm,4Grip Head,8Fish Mouth Clip,2Sand bag,2 Upgraded Carrying Bag. The detachable structure makes carry very convenient. Comes with a carrying bag, very easy for you to carry around. Monolight, reflector, umbrella are NOT included. HEAVY DUTY C STAND It is designed with C-shaped 3-leg structure, 3 legs at the bottom are spread in 120 degree, stable and safe. Sliding legs can be folded flat for space-saving storage. Non-slip rubber pad on the bottom, prevents scratches on floors. C-STAND ADJUSTABLE AND STABLE Height of center stand column can be adjusted from 4.92ft150cm to 11.3ft345cm, Holding arm length4.2ft128cm. The center stand has built-in buffer spring, which can reduce the impact of sudden fall of the installed equipment and protect the equipment when adjusting the height. Flexibility and Security of WheelsThe heavy duty c stand with casters equipped with step lock system to lock and release the wheels, its step on lock can make sure the security when using this wheels set Its rubber base is perfect for its non-slip design. HEAVY DUTY C STAND WIDE APPLICATION Designed with 14-inch to 38-inch screw tip, applicable to most photographic equipment, such as photography studio video reflector, umbrella, monolight, backdrops and other photographic equipment. C STAND CONVENIENT CARRYING The c stand heavy duty is a detachable structure makes transportation very convenient. Comes with a carrying bag, very easy for you to carry around NOTE When you adjust the angle under the conditions that the weight on both sides of the joint head is not balanced, it will damage the screw that connects the two halves of the joint. SO PLEASE hold the rear part of the arm to keep the arm balanced firstly before adjusting the angle.

Heavy-Duty Stand Versatile FunctionThis photography C-stand made of 100 solid stainless steel, the C-stand with refined design serves long-lasting durability for supporting heavy-duty photographic gears like umbrella, strobe, monolight, reflector, softbox, and camera and flash and more.. Boom Arm Grip HeadGrip arm features the strongest and most popular Grip Head in the industry. Guaranteed to hold, it will not slip. The included 4 feet 125cm extension grip arm fits neatly into the stand's removable 2.5 grip head, allowing you to offset the stand and cantilever flags, gobos, or lights out of the way of the action. Plates feature two holes 14 and 38, threaded ends are compatible with most equipment.. Sturdy Foldable Turtle BaseThe base has the classic wide120 Spread, stable C-type legs that accommodate easy sandbagging and straddling of obstacles, folding flat for easy transport and storage.. Extendable HeightThe Turtle base C-stand has chrome steel construction and a 3-section column with 2 risers that support fully extend from 5 feet 150cm to 10 feet330cm. Foam Grips help avoid sliding and hand hold.. Package ServicePackage 1C base,1central pole, 1boom arm, 2grip head, 1sandbag, 3 mouth clip, 1 durable storage bag. If you face the problem of instruction usage, feel free to contact us to help explore more about it..

Stable C Stand The wobble-free c stand is designed with C-shaped 3-leg structure, 3 legs at the bottom are spread in 120 degree, stable and safe. Sliding legs can be folded flat for space-saving storage. Non-slip rubber pad on the bottom, prevents scratches on floors. Adjustable Sturdy C-StandHeight of center stand column can be adjusted from 4.92ft150cm to 10.8ft330cm, Holding arm length4.2ft128cm. The center stand has built-in buffer spring, which can reduce the impact of sudden fall of the installed equipment and protect the equipment when adjusting the height. The C stand Max weight it could hold is 20KGonly the center column.. Stainless Steel Construction C stand Soonpho heavy duty C-stand made of stainless steel material, corrosion resistant and long-lasting, avoiding rusting, which gave it longer service time and exceptional strength for heavy-duty. Wide ApplicationExtension arm with 14 and 38 threaded ends are compatible with most equipment such as photography studio video reflector, umbrella, softbox, overhead shooting and monolight. C Stand with Boom Arm The boom arm withstands up to 17.6lb 8kg, while the center column supports up to 44lb20kg, designed to support heavy equipment such as softboxes and umbrellas. The Boom arm could be rotated 360 degrees.. Package ContentsPackage come with 1C-Stand, 1Holding Arm, 2Grip Head, 3Fish Mouth Clip, 1Sand bag, 1 Upgraded Carrying Bag. The detachable structure makes carry very convenient. Comes with a carrying bag, very easy for you to carry around..

Heavy Duty Photography C StandThis C stand is made of solid corrosion-resistant metal, and boasts a load capacity of 20 kg 44 lbs, allowing it to safely support heavy photographic equipment. A built-in cushion spring prevents damage to equipment during height adjustment.. Height Boom Arm AdjustmentThe main pole of this photography C stand is extendable and can be adjusted in height from 4.2ft to 9.8ft. The boom arm length is 128cm4.2ft. It's great for supporting heavy photographic equipment such as monolights, umbrellas, reflectors and softboxes. etc.. Flexible Boom Arm Grip HeadThe boom arm comes with 14 and 38 screw adapters on each end, increasing the adaptability of this light stand. The grip heads can lock the boom arm with a firm grip and allow 360 flexible angle adjustments. 3 holes 4mm 7mm 15mm in each grip head can fasten rods in different diameters.. Foldable Sturdy Turtle BaseThe 3 legs of the 'C' base are spread 120 with non-slip pads on the underside to keep the unit stable. Foldable design allows for easy transport and storage.. Two Ways to UseThis softbox C stand can be used without the boom arm, the unit can simply be mounted on a light stand for more flexible use, mount the boom arm on a light stand and extend or adjust the angle with the knob.. Package Included1central pole, 1boom arm, 1C base, 2grip head. Softbox is not included.

Made of pure metal,giving it a longer service time and exceptional strength for heavy duty. Note When you adjust the angle under the conditions that the weight on both sides of the joint head is not balanced, it will damage the screw that connects the two halfs of the joint. SO PLEASE hold the rear part of the arm to keep the arm balanced firstly before adjusting the angle.. Its height is adjustable,satisfying your various shooting needs.. Easily attach to other equipment with its knob and spiral screw.. Rubber padded,giving you a comfortable feeling and preventing it from sliding when you move.. Its sturdy 3 legs structure at the bottom ensures your equipments stable. NoteStand onlythe monolight is NOT included.

Used for mounting strobe lights, reflectors, umbrellas, softboxes and other photographic equipment Its solid locking capabilities ensure the safety of your lighting equipment when in use. Sandbags can be placed on the legs to increase the base weightNot included. The light stand is made of lightweight metal making it strong for heavy duty work. Its solid locking capabilities ensure the safety of your lighting equipment when in use.

Wide Compatibility The light stand features a stainless steel 14-20 screw, allowing connection with various photography equipment such as small COB lights eg. SmallRig RC 60B RC 30B, etc., flashlights eg. SmallRig 4634, ring lights, LED video lights eg. SmallRig 3286B 4660 4661 3489B 5357 5359, and softbox eg. 4633 4874 4358 3585 5395.. Foldable Design The lighting tripod stand 5475 features 180 flip-up folding for compact storage, measuring only 42 cm16.5 in when folded, making it easy to fit into suitcases or backpacks and ensuring convenient portability.. Adjustable Height The lighting stand supports height adjustment from 42-190cm 1.386.23ft to accommodate different mounting heights for your equipment. The locking structure of the lever clamp allows for quick height adjustments.. Adjustable Legs The two-section telescopic leg tubes provide three angle options, with wider leg tube angles enhancing stability. Additionally, the bottom of the lightstand is equipped with enlarged anti-slip foot pads to increase stability.. Robust Sturdy Construction Mainly made from anodized aluminum alloy, this portable light stand is rust-resistant and durable. The joint and non-flip feet is made of ABS, products net weight 2.14 lb, max weight capacity up to 4 kg 8.8 lb of equipment..

Sturdy C Stand BaseIt is designed with C-shaped 3-leg structure, 3 legs at the bottom are spread in 120 degree, stable and safe. Sliding legs can be folded flat for space-saving storage. Non-slip rubber pad on the bottom, prevents scratches on floors. Adjustable Stable C-StandHeight of center stand column can be adjusted from 4.92ft150cm to 11.3ft345cm, Holding arm length4.2ft128cm. The center stand has built-in buffer spring, which can reduce the impact of sudden fall of the installed equipment and protect the equipment when adjusting the height. Flexibility and Security of Wheels The heavy duty c stand with casters equipped with step lock system to lock and release the wheels, its step on lock can make sure the security when using this wheels set Its rubber base is perfect for its non-slip design.. Wide ApplicationExtension arm with 14 and 38 threaded ends are compatible with most equipment such as photography studio video reflector, umbrella, softbox, overhead shooting and monolight. Package Contents3Metal Swivel Caster 1C-Stand1Holding Arm2Grip Head3Fish Mouth Clip1Sand bag1 Upgraded Carrying Bag. The detachable structure makes carry very convenient. Comes with a carrying bag, very easy for you to carry around.

Used for mounting strobe lights, reflectors, umbrellas, softboxes and other photographic equipment Its solid locking capabilities ensure the safety of your lighting equipment when in use. Sandbags can be placed on the legs to increase the base weightNot included. The light stand is made of lightweight metal making it strong for heavy duty work. Its solid locking capabilities ensure the safety of your lighting equipment when in use.

SPECIFICATIONS Complete kit includes 40 Master C-Stand with sliding leg and quick-release system, 2.5 grip head, and 40 grip arm with hex stud for professional photography and video use.. QUICK-RELEASE SETUP Patent-pending leg design allows all legs to swing into position in seconds, significantly reducing setup time during active studio and location shoots.. SLIDING LEG STABILITY Adjustable longest leg enables precise leveling on stairs, slopes, or uneven surfaces while maintaining balanced load support and overall stand stability.. SECURE SAFETY DESIGN Spring-loaded locating pin keeps the middle leg locked in place to reduce tipping risk if the stand is accidentally contacted during use.. EXTENDED GRIP REACH 40 grip arm and 2.5 grip head provide flexible positioning of lighting fixtures, flags, and modifiers with confident, repeatable control..

New Upgraded Materials This c-stand is different from ordinary aluminum alloys. It is made of durable steel, strong and durable, and gives excellent strength for heavy work. The outer layer is covered with a layer of black material to effectively prevent wear and rust.. Stable Safety Adjustable The c stand of the base can be expanded 120 degrees to make the device more stable. The adjustable center stands height ranges from height 59 in and Max height 130 in. The height of the C-bracket can be adjusted from 1.5M5FT to 3.2M10.5FT. It is convenient to shoot from various angles.. Easy to assemble and carryDetachable base, the legs of the base are foldable and can be quickly installeddisassembled. Lightweight and easy to carry. It only takes a little time to install and disassemble easily.. Widely usedIncluded 14-inch to 38-inch screw tip, applicable to most photographic equipment. The heavy-duty c stand is used for mounting strobe lights, reflectors, umbrellas, softbox, camera, and other photographic equipment.. Upgraded Package1 x C stand, 1 x Crossbar, 2 x Runner, 1 x sandbag, 3 x Clip, 1 x Upgraded High-quality Carrying Bag.It can be used in studios, outdoors, and various shooting scenes..

Pro Heavy Duty C Stand with 360 CastersPhotography heavy duty light stand equipped with 360 swivel casters for convenient mobility, this wheeled light stand allows you to glide your heavy equipment on the floor without dragging and lifting. Step-on brakes lock the casters and keep the tripod stationary while in use. Rubber wheels protect the floor from scratches. Solid Construction This durable tripod can support photographic equipment up to 66lb 30kg. Corrosion-resistant stainless steel construction withstands moisture, high temperature, and shocks, making this tripod suitable for use in different weather conditions. Adjustable Height The 3-section telescopic tripod can extend from 4.26 to 10 130 to 305cm for a wide variety of height configurations and fold down to 3.9 120cm for easy storage and carrying. The comfortable foam pad gives you a firm grip and prevents the tripod from slipping in transit. Folding Legs Buffer Spring Invertible tripod legs can fold up flat for space-saving storage and effortless transportation. The inbuilt spring-loaded mechanism offsets the impact of sudden drops so as to protect your devices from damages. Universal CompatibilityDesigned with universal interface which can mounts strobes, monolights, ring lights, reflectors, softboxes... Ideal for shooting indoors and outdoors, this rolling tripod is essential for photographers, videographers, filmmakers, and the likes.

Heavy-Duty VersatileMade of 100 solid stainless steel, the C-stand serves long-lasting durability and the built-in buffer spring can protect the equipment when adjusting the height. It's suited for supporting heavy-duty photographic gears like an umbrella, monolight, reflector, and softbox. Etc. Adjustable HeighExtension ArmThe center stand can be flexibly adjusted to a height from 59 inches to 130 inches. The holding arm length is 4.2ft128cm, with 14 and 38 screws at both ends which can be compatible with most equipment. 2 Metal Grip Heads with 4 HolesGrip heads keep the arm firmly in place and allow you to adjust the different shooting angles. 4 different-size holes are compatible with various types of equipment. Sturdy Base3 legs at the bottom can spread at 120 degrees which ensures your equipment is more stable. The anti-slip rubber pads can prevent the stand from slipping and protect the wood and ceramic floors from scratches. Package Contents1 Center stand column 1 Boom arm 2 Grip head1 Bracket bottom 1 Sandbag 1 Storage bag.

Heavy Duty Spring-Loaded Light StandThe photography C-stand is made of 100 solid stainless steel. Its refined design offers long-lasting durability for upholding heavy-duty photographic gear like umbrella, strobe, monolight, reflector, softbox, camera and flash, and more.. Solid ConstructionThe C stand supports photographic equipment up to 44lbs 20kg. Its whole stainless steel construction withstands moisture, high temperature, and shocks, making it easy to use during outdoor shooting sessions.. Sturdy Foldable Turtle BaseThe turtle base features classic wide120 Spreading and an enlarged column that offers better bearing capacity. Moreover, you can fold it flat for easy transport and storage.. Extendable HeightThe Turtle base C-stand comes with metal construction and a 3-section column with 2 twisting knob to fully extend from 5 feet 150cm to 10 feet330cm. Grips help avoid sliding and provide a good handhold.. Package ServicePackage 1 metal base,1central pole. If you face the problem of instruction usage, feel free to contact us to help explore more about it.. Noted Extension Arm Not Included..

Sturdy and DurableMade of 100 tough stainless steel, with excellent durability and load-bearing capacity of up to 20KG, suitable for carrying professional photography and film equipment, even after a long time of use is still stable.. Adjustable HeightThe height of the bracket can be adjusted from 149cm to 330cm, which can meet the needs of different scene shooting, the main rod built-in cushion spring can reduce the impact of the sudden fall of the mounting equipment, and also protect the equipment when adjusting the height.. Complete AccessoriesEquipped with a crossbar and 2 adapters, you can use the crossbar and adapters to fix a variety of equipment, such as lamps and lanterns, flag boards, etc., and you can also adjust the angle of the crossbar and the length of the crossbar extension through the adapters.. Wide CompatibilityThe ends of the crossbar are 14 and 38 threaded, which can be compatible with more devices. And the adapter has 4 different sized holes to insert different diameters of plug rods.. Foldable C-Shape BaseThe C-shape base with non-slip pads allows you to use sandbags to increase the stability of the stand, and it can be folded for easy storage and carrying..

TWO WAY TO USEWithout the boom arm, equipment can be simply installed on the light stand While for more flexible use, please attach the boom arm onto the light stand and then you can extend the boom arm and adjust the angle by using the butterfly knob to achieve more user-friendly performance . And With 14 38 Screw for a variety of product needs.. ADJUSTABLEFeel free to adjust the height of the light stand from 45 inch115cm to 157 inch400cm The arm can be extended to 75 inch190cm length It can also be rotated to 180 degree which allows you to capture the image under different angle.. Air-Cushioned Heavy Duty Light StandWith the air cushioned shock feature you will be able to protect your equipment or ''fingers'' from any harm in case you forget to tighten any of the sections of your light stand due that the light slowly descends due to the air cushioned feature.. WIDE COMPATIBILITYUniversal standard light boom stand is a great support for most of photographic equipment, such as softbox, umbrellas, strobeflash light, and reflector. Perfect to use outdoor and indoor, giving you a great support to meet various photo or video shooting situations.. Come with a SandbagThe sandbag attached allows you to easily control the counterweight and better stabilize your lighting setup.The balance of the weight is up to you,because you can change the weight of the sandbag to create angles of your photography..

Ultimate Stability Heavy DutyEngineered from 100 premium stainless steel, this mic stand for desk is built to handle your heaviest gear. With a 2KG4.4LB load capacity, its the rock-solid solution for heavy mics like the Shure SM7B or Blue Yeti, eliminating the wobbling common with plastic stands.. Universal Compatibility with AdaptersNo more compatibility headaches This kit includes 58 to 38 and 58 to 14 adapters, making it compatible with EVERY professional microphone, shock mount, and camera on the market. From vintage studio mics to the latest webcams, weve got you covered.. Pro C-Stand Boom Arm Grip HeadBring professional studio ergonomics to your workspace. The 13-inch extension arm and dual-hole grip head allow for infinite angle adjustments. Perfect for overhead filming, podcasting, or positioning your mic perfectly between dual monitors.. Space-Saving Terrain AdjustableThe iconic C-stand sliding leg design is a game-changer for cluttered desks. Easily slide the legs under equipment or adjust them for uneven surfaces. The non-slip rubber feet ensure a firm grip while protecting your desk from scratches.. All-in-One Content Creation HubMore than just a mic standits a complete workstation. Use the included 2 ball heads and adapters to mount your camera, ring light, and smartphone simultaneously. The perfect compact setup for YouTube, Twitch, Zoom, and Home Studio recording..

Contents 42 C stand arm with 2pcs grip head, with 14 and 38 screw tip on each end of the grip arm. Useful C stand boom arm extension This boom arm photography with grip head is an ideal equipment for a C-Stand, light stand to hold flag, reflector, gobo, light or other photography accessory. Material Stainless steel tube and aluminum alloy grip heads, this boom arm for c stand is strong enough to provide great stability and safety for your studio video equipments. Grip head 2 Metal GripKnuckle Heads with 4 different-size holes, a large ergonomic T-handle for easy installation. Note The light stand is not included. C stand boom arm and grip heads only..

Streamlined Low-Profile Arm Stand Elevate your workspace with our sleek low-profile boom arm, designed to seamlessly integrate with your desk setup. With its minimalistic design, this arm discreetly tucks beneath your monitor, ensuring an unobstructed view of your surroundings. Say goodbye to clutter and hello to a clean, professional workspace.. Ultimate Adjustability Experience unparalleled flexibility with our fully adjustable boom arm. Extendable up to 25.6 inches, it offers complete coverage for any recording or streaming setup. With a vertical adjustment range of 250 and a horizontal rotation of 360, you have the freedom to position your microphone precisely where you need it for optimal performance.. Robust Construction Engineered from solid alloy steel, the InnoGear MU-LP26 mic stand combines durability with functionality. With a maximum payload of 1.5 kg 3.3 lbs, it effortlessly supports your microphone setup while ensuring a secure connection. Assembly is quick and hassle-freesimply insert the arm into the table mount and tighten the knob for a stable, reliable setup.. Secure C-Style Clamp Crafted from robust alloy, our C-style clamp ensures unwavering stability for both your mic and desk setup. Designed with ample contact area and rubber padding, it expertly secures to desktops up to 2.75 inches thick, safeguarding against marks or scratches. Enjoy seamless, noise-free adjustments during recording or streaming sessions, courtesy of its impeccably smooth operation and steadfast grip. Also, it doubles as a convenient headphone hook for added versatility.. Universal Compatibility Designed to accommodate a wide range of microphones, this microphone stand ensures compatibility with Hyper X QuadCast, SoloCast, Fifine K669B AM8, Blue Yeti, Shure SM7B, AT2020, and more. The included 38 to 58 , and 38 to 14 screw adapter expand your options to use with not only mics but webcams and ringlights, while the universal mic clip is perfect for dynamic microphones like the Shure SM58, Shure PGA48, Shure SM48. Whether you're a seasoned professional or just starting out, our boom arm has you covered..

ADJUSTABLE EXTENSION BOOM ARMThis extension boom arm offers an adjustable length from 22inch54cm to 63inch162cm, providing wide telescopic adjustment and stable locking for overhead lighting, multi-angle shooting and professional studio photography. As a reliable tripod extension arm, it works seamlessly with C stands, light stands and tripods to fully meet all photography and videography requirements.. HEAVY DUTY STABLE SUPPORTBuilt from reinforced aluminum alloy with a thickened 28mm tube diameter, this tripod boom arm offers superior durability, corrosion resistance and long-lasting performance. Supporting up to 13.2lbs6kg, the lightweight yet sturdy design reduces sagging and shaking, providing reliable overhead support for photography lighting and professional studio equipment.. UNIVERSAL 14 38 SCREW COMPATIBILITYEquipped with standard 14 to 38 screw adapters, this tripod extension arm delivers wide compatibility with most photography and lighting equipment, including softboxes, strobes, monolights, cameras and camcorders. Easy to install on tripods and C stands, this versatile extension boom arm enables fast setup and stable mounting for all lighting setups.. FLEXIBLE ANGLES STABLE LOCKING SYSTEMThis professional c stand boom arm supports 360 horizontal rotation and 135 vertical adjustment, allowing smooth multi-angle and overhead shooting. Secure twist-lock knobs ensure fast and firm length positioning, while the counterweight hook supports sandbag balancing to reduce vibration and tipping, providing stable support for studio lighting.. IDEAL FOR PHOTO VIDEO CREATIONThis multi-functional boom arm light stand accessory is perfect for photography, videography, live streaming, vlogging, podcast recording, product photography, cooking videos, unboxing and content creation. Whether used as an overhead mount, lighting extension arm or reflector support, it delivers professional performance for studios, home setups and outdoor shoots..

ADJUSTABLEFeel free to adjust the Length of the extension Boom Arm from 3.6ft 110cm to 8.2ft250cm It can also be rotated to 90 degree which allows you to capture the image under different angle.. DURABLE STAINLESS STEEL CONSTRUCTIONStainless steel structure is anti-corrosion, anti-rust and long-lasting, enough for long time use, always keep your photographic equipment in safe when in use..The Crossbar Holding Arm is weight 7.7 lbs3.5kg.. WIDE COMPATIBILITYWith Universal Baby Pin Adapter, which is a great support for most of photographic equipment, such as softbox, strobe flash, Monolight, LED light, and reflector. Perfect to use outdoor and Studio indoor, giving you a great support to meet various photo or video shooting situations.. 2-SECTION EXTENSION BOOM ARMSUPON boom arm is compatible for all light stand, C stand. And built with 2 sections to adjust the lenght, to work with strobe light, softbox, monolight, LED panel, reflector and other photography equipment of different sizes and shapes.. COME WITH A SANDBAGThe sandbag attached allows you to easily control the counterweight and better stabilize your lighting setup.The balance of the weight is up to you,because you can change the weight of the sandbag to create angles of your photography..

Extra High Extension Riser - This Overhead Desk Mic Stand features a 31.5in80cm high riser, perfect for Overhead Mic Stand setups. It effortlessly crosses monitors, letting you record in ideal positions without blocking screens. Unlock creativity and max out space use with this mic arm design.. Sturdy Construction - The Overhead Microphone Stand uses thickened, heavy duty steel for its riser and stand. Stable as a rock for your mic boom arm Upgraded clamps grip desktops up to 4.2in106mm thick tighter durable, secure, and built to last.. Full Range Motion - Mount this Desk Mic Arm on your desktop edge. Adjust the riser height and swivel the extension arm, switch between sittingstanding effortlessly. A mic arm with wide-range motion, ideal for broadcasting, recording, podcasting.. Tool-Less Adjustment - The boom arm mic stand desk joints have quick-moving clip, tweak your microphone arms heightangle anytime, no tools needed. Easy to operate, boosts recording quality fast.. Universal Compatibility - This overhead microphone boom arm comes with 3858 and 1438 adapters. Fits mics like HyperX Quadcast S, Shure SM7B, Shure MV7, Blue Yeti, AT2020. Perfect for recording, gaming, live streaming. A microphone boom arm for every setup.

Introducing NEEWER BASICS Simple and practical, NEEWER Basic is an economical product line that focuses on essential functions and designs, without unnecessary extras and materials. The SC320 Lite is a heavy duty C stand made from stainless steel, equipped with a sturdy boom arm and two grip heads to securely hold various heavy photography equipment for different setups and effects. Its metal turtle base ensures solid support without wobbling. Heavy Duty 100 Stainless Steel C Stand Made from 100 stainless steel, this photography light stand offers exceptional strength and rust resistance, perfect for both studio and outdoor shooting. The boom arm withstands up to 17.6lb 8kg, while the center column supports up to 44lb20kg, designed to support heavy equipment such as softboxes and umbrellas. And the column features a spring loaded structure inside to protect the mounted device from shocks and impact caused by sudden drops. Adjustable Height Boom Arm The telescopic center column with 3 sections adjust from 4.7' to 10.5' 146cm to 320cm, allowing you to position your equipment at various heights as needed. The holding arm extends up to 4.2' 128cm and can tilt up and down for versatile lighting coverage and adjustable angles. Wide Compatibility with 14 38 Screws Featuring 14 38 mounting screws, this C stand with boom arm can connect studio monolights, LED video lights, softboxes, reflectors, photography umbrellas, among others with 14 38 threads. Includes two grip heads with 4 different sized holes to help lock rods, arms, and umbrella shafts while providing flexible angle adjustment. Foldable Quick Setup This adjustable lighting stand with a foldable turtle base is effortless to set up, store, and transport. Equipped with simple metal knobs, it allows quick adjustments and secure locking without the need for tools. The three legs are fitted with nonslip rubber pads to prevent sliding and protect wood and ceramic floors from scratches.

Upgraded Light StandThe c stand can adapt to more complex environment,such as stairs and other uneven grounds. Sliding legs can be folded flat for space-saving storage. Non-slip rubber pad on the bottom, prevents scratches on floors. Sturdy, Durable, and SafeThis C-stand is crafted from high-quality stainless steel, offering greater corrosion resistance than ordinary aluminum alloys, thus ensuring a longer service life and superb load-bearing capacity. The center stand features a built-in shock-absorbing spring that minimizes the impact of sudden drops and safeguards the equipment during height adjustments. Adjustable Height and Extension Arm3 legs at the bottom are spread in 120 degrees which achieves your equipment more stable. The adjustable center stands height ranges from height 59 in and Max height 130 in. Extension arm with 14 and 38 threaded ends are compatible. Feel free to adjust the height for meeting different shooting demands. Widely Used2 Metal Grip Heads with 4 Holes are compatible with various equipment. C-stand serves long-lasting durability for supporting heavy-duty photographic gears like umbrella, strobe, monolight, reflector, softbox, and more. Can be used in the studio, outdoors, and in the field. Meet various photo and video shooting requests. Package and After-sale Service1C base,1central pole, 1boom arm, 2grip heads, 2sandbags, 6 mouth clips, 1 durable storage bag. If have any question, feel free to contact us.

LARGE CAPACITY-Made of sturdy metal, the scissor arm tube is wide and thick enough. Multi-reinforced designs make the weight capacity of arm stand up to 2 kg. The compact and strong boom arm gives your microphone secure hold to reduce violent shaking from intense gaming operation or bump and hit.. FLEXIBLE ADJUSTMENT-Every joint on the arm stand provides a wide angle adjustment range. You can stretch it vertically for 180 or horizontally for 135. Sufficient flexibility and extension allow you to adjust recording posture at will for a fitter angle to produces more touching and resonant audio.. SPACE SAVING-The foldable mic boom arm is greatly convenient. It is handy and easy for you to put it aside the desktop corner after recording or other using. The suspension mic stand provides more desk using space and leaving more places for your snacks, PC setup or computer accessories placing.. NOISE ABSORBING-The firm and sturdy boom arm protects your microphone away from shaking or falling off. It maintains a distance between your mic and desk, to better prevent the low frequency vibration noise entering into the mic, which make your sound clearer and smoother when podcasting or live streaming.. WIDELY USE-With universal 58 '' screw, the stand is suitable for the most of mics on the market. It is simple to install and friendly to beginner or tech literate. Compatible with FIFINE K658, K688, A8 and more, it can be used to carry a heavily sturdy microphone for better recording, gaming, live streaming, podcasts, vocals.. TIPS 1 The desk clamp is suitable for desktop with a thickness of 2or less. 2 The microphone is not included. 3 The package including, boom arm stand1, desk clamp1, velcro cable tie3, users manual1.

C STAND WITH WHEELS KIT PACKAGE INCLUDES 3Metal Swivel Caster,1C-Stand Base,1Holding Arm,2Grip Head,3Fish Mouth Clip,1Sand bag,1 Upgraded Strong Carrying Bag. The detachable structure makes carry very convenient. Comes with a carrying bag, very easy for you to carry around. Monolight, reflector, umbrella are NOT included. HEAVY DUTY C STAND It is designed with C-shaped 3-leg structure, 3 legs at the bottom are spread in 120 degree, stable and safe. Sliding legs can be folded flat for space-saving storage. Non-slip rubber pad on the bottom, prevents scratches on floors. C-STAND ADJUSTABLE AND STABLE Height of center stand column can be adjusted from 4.92ft150cm to 11.3ft345cm, Holding arm length4.2ft128cm. The center stand has built-in buffer spring, which can reduce the impact of sudden fall of the installed equipment and protect the equipment when adjusting the height. FLEXIBILITY AND SECURITY OF WHEELSThe heavy duty c stand with casters equipped with step lock system to lock and release the wheels, its step on lock can make sure the security when using this wheels set Its rubber base is perfect for its non-slip design. HEAVY DUTY C STAND WIDE APPLICATION Designed with 14-inch to 38-inch screw tip, applicable to most photographic equipment, such as photography studio video reflector, umbrella, monolight, backdrops and other photographic equipment. C STAND CONVENIENT CARRYING The c stand heavy duty is a detachable structure makes transportation very convenient. Comes with a carrying bag, very easy for you to carry around NOTE When you adjust the angle under the conditions that the weight on both sides of the joint head is not balanced, it will damage the screw that connects the two halves of the joint. SO PLEASE hold the rear part of the arm to keep the arm balanced firstly before adjusting the angle.

All-in-One Design for Content Creators This microphone floor stand features a built-in PhoneTablet holder, allowing you to mount your microphone and recording device simultaneously. for streaming, podcasting, recording, and live performances. Adjustable Sturdy Construction The adjustable boom arm and height up to 70 inches provide flexibility for any setup. The heavy-duty base ensures stability, preventing wobbling or tipping during use. Universal Compatibility Compatible with most microphones, phones, and tablets up to 10 inches38 to 58 adapter included. Easy Setup Portability Designed for quick assembly and disassembly, this stand is for both home studios and on-the-go use. The lightweight design makes it easy to transport. Professional-Grade Performance Whether you're a podcaster, musician, or live streamer, this stand delivers professional-quality support for your equipment, ensuring a seamless and polished performance every time.

Sturdy Metal The all metal microphone arm stand provides stability and sturdy protection for your podcast microphone whether you're gaming, podcasting, recording or streaming. The microphone is not included. Low Profile The arm stand for gaming can extend from the bottom of your computer screen. The podcast mic stand saves more space in a unobstructing view while in an intense game.. Cable Management The low profile microphone boom stand is equipped with cable managements in hiddenness to organize your microphone cables. Neat arrangement of cable will not cause excessive pulling or resulting in unexpected use, keeping your streaming setup cleaner.. Fully Adjustment Suspension arm stand recording can be extended to 29 inches, suitable for your long large office desktop. The boom arm for microphone can be adjusted up to down by 220 degrees, and horizontally by 360 degrees. More angle adjustments provide more usage options. TipsThe section which near the C-clamp can not be adjusted up to down.. Screw Adapter Coming with three kinds of threads size, 14, 38, 58, the microphone boom arm solves the hassle of choosing additional adapters. You can easily and quickly install and use microphones, shock mounts, cameras, etc with the mic stand in gaming, vocal recording, video creation.. TIPS 1 The desk clamp is suitable for desktop with a thickness of 0.8 to 2.4in. 2 The microphone is not included. 3 The package including, boom arm stand1, desk clamp1, rotatable ball-head1, allen wrench1, users manual1. 4 Two adapters 14'' to 38'' adapter and 38'' to 58'' adapter are already connected on the rotatable ball-head..

Durable Portable - The desk camera mount stand is made of aviation aluminum alloy and has a long service life. Lightweightonly 16.8oz but durable. Excellent partner to take to any place for saticify your photing needs. The matte surface is easier to clean.. Height Adjustable - With an adjustable range of 10.8331.1, our webcam mount for desk provides ample flexibility for any overhead shooting or lighting needs.. Multi Angle Adjustable - High quality ball head guarantees a 360 rotation for panoramic shooting. -9045 front tilt for multi-angle adjustment, making it ideal for capturing the perfect shot. Extension capacity of stand is up to 4.4 lbs2 kg, retraction capacity of mount is up to 6.6 lbs3 kg.. Space Saving Base - C-clamp with a width adjustment button at the bottom. It is suitable for tables with a maximum thickness of 5cm2in. Compared with the traditional tripod, this C-clamp stand is more save space.. Wide Application - Ailight overhead webcam mount is great for supporting ring light, DSLR camera, microphone, phone holder, webcam, monitor, making camera stand an excellent choice for live streaming, makeup, photography, and zoom meetings..

Adjustable Height Solid The height of the microphone stand with boom arm is adjustable from 28.1 inches to 89.8 inches by adjusting the knobs, perfect for people in all age groups. It features upgraded supporting structures for better load-bearing capacity, holding your microphone in position.. Steady Tripod Stand The high-quality thickened steel poles enhance the exceptional stability and durability of this mic stand. Compared to other lighter stands that are easy to tip over, our mic tripod stand is as heavy as 4.0lbs, serving indoor and outdoor use.. Flexible Detachable Boom Arm The boom arm of the stand is adjustable from 16 inches to 30 inches in length and it can rotate 360 horizontally as well as up to 180 vertically. You can choose the best angle and length of performance by easily adjusting the knobs on the boom arm. Remove the boom arm and attach the mic clip, then you can also use it as a straight mic stand.. Portable Carrying Bag The package comes with a premium carrying bag and the floor mic tripod stand is easy to disassemble into several pieces which allows it to easily pack into the small carrying bag 19.58.3 and fit anywhere, easy to transport and store.. Wide Compatibility Two different styles of mic clips in package are compatible with most types of microphones such as Shure SM58, Shure SM48, Shure PGA48, Samson Q2U, ATR2100x-USB, etc. The included metal 38 to 58 screw adapter is suitable for Blue Yeti, Snowball, Hyper X QuadCast, SoloCast, Shure SM7B, AT2020, Fifine AM8 and more..

Stand Weight 20.8 53cm. Load Capacity 2KG 4.4LB. Great for working on uneven terrain.. Made of 100 robust stainless steel. Fitted with captive locking t-knobs on the column.. Sliding legs can be folded flat for space-saving storage. Non-slip rubber pad on the bottom, prevents scratches on floors..

LENGTH ADJUSTABLEThis Extension Boom Arm with Length from 22inch 56cm to 67inch170cm It can be rotated to 320 degree which allows you to capture the image under different angle.. DURABLE METAL CONSTRUCTIONAll Metal material and heavy duty structure make it strong enough for long time use, always keep your photographic equipment in safe when in use. The Crossbar Holding Arm is weight 1.63 lbs740g, features 1.1in28mm thickened aluminum tubing with CNC-forged joints supporting 2.2lbs load at full extension .. WIDE COMPATIBILITYWith Universal 14 to 38 Universal Screw Adapter, which is a great support for most of photographic equipment, such as softbox, strobe flash, Monolight, LED light, and reflector. Perfect to use outdoor and Studio indoor, giving you a great support to meet various photo or video shooting situations.. It can be used as a professional tripod extension arm The tripod extension arm is equipped with 14 and 38 inches screws to make it compatible with most ball heads, cameras and cameras. It can be easily installed on various tripods to ensure good integration with your existing camera equipment.. Perfect for Various ApplicationThe Extender Horizontal Center Column is an essential tool and widely used to video recording, live streaming, tutorials, content creation and various photographing activities such as vlogging, video conferencing, unboxing, baking, cooking, crafting, drawing, and more. It empowers you to capture stunning visuals with ease and precision..

Stable Base Sturdy Boom ArmCompared to other tripods, the weighted square base of the microphone stand weighs 6.6 pounds, which is more stable and has a larger load-bearing capacity.Sturdy boom arm with extra strong springs provide extra support, prevents the microphone from accidental dropping, and effectively reduce noises and vibrations.. Height AdjustableThe height of this microphone floor stand is adjustable from 26.7 inches to 67.7 inches, easy to move without taking up desktop space.The perfect floor use mic stand for games, recording rooms, guitar playing, piano singing, live broadcasts, podcast etc.. Applicability This mic boom arm set includes 38to 58 Screw, 38 to 14 Screw, and Mic Clip adapter to suit most microphones. The mic stand can work perfectly with Blue Yeti, Blue Yeti Nano, Blue Snowball, SM7B MV7, Razer Seiren mini and most other microphones.. Double Pop Filter 360 angle rotatable through adjustment knobs which allows for easy positioning. Double screen pop filter effectively blocks air blasts and banishes the dreaded hissing and lisping sounds to achieve perfect sound quality.. Complete Microphone Stand KitPackage includes everything needed for studio recording or broadcasting, 1x metal base, 3x support rods, 1x folding arm, 1x mic clip, 1x pop filter, 2x metal screws38 to 58 and 38 to14, 5x cable ties and 1x Product Manual. The microphone arm can be folded for easy carrying and storage..

Magic Arm with Super Clamp Crafted from robust aluminum alloy, the low profile but super grip boom arm camera mount supports gear or equipment like DSLR mirrorless cams, action cameras, webcams, microphones mics or smartphones up to 500g17.6oz. This table stand rig is ideal mounting accessories compatible with iPhone for overhead photography, vlogging, gaming, live streaming, video recording, Zoom calls and conferencing, videography, podcast, etc. Recommended for use in static situations. Articulating Arm with Ball Heads The two section friction boom arm offers a 55cm22 extended length, and is equipped with three sets of 360 dual ball head adapters, enhancing the flexibility of angle and height, and secured with a simple twist of the locking knobs. Each ball head comes with multiple rubber rings to firmly grip your gear and prevent accidental drops. For Both Flat Surfaces and Tube Rods The V grooves and pivot tips of the desk camera mount securely grip flat surfaces up to 250mm thick and cylindrical objects up to 1.640mm in diameter, such as desks, tripods, selfie sticks, light stands, shoulder rigs, bikemotorcycle handlebars, poles, etc. Also compatible with smallrig magic arms small rig camera accessories, compatible with DJI Ronin-M Ronin MX compatible with Freefly Movi 25mm and 30mm gimbal stabilizer rods. Anti Twist Stable Grip The overhead camera mount has an anti twist pin on each mounting interface, to firmly connect the overhead phone mount with the super clamp and the mounted device. Even the super clamp is outfitted with non slip pads, protecting your device from scratches and preventing unwanted wobbling during shooting sessions as content creator essential and influencer must have. Wide Compatibility For LED lights, field monitors, action cameras, mount adapter accessories compatible with DJI Osmo Pocket 3 2 Creator Combo Action 5 Pro 4 Insta 360 X5 Insta360 X4 X3 Go 3S Ace Pro GoPro Hero 13 Go Pro 12 11 10 9 Black AKASO Brave 7 8 EK7000 etc. The 2.2-3.257-80mm phone holder is compatible with iPhone 16 Pro Max Plus 15 14 Mini Samsung Galaxy S25 S24 Ultra Google Pixel 9, etc., for photography, video recording, and filming creation.

ALL STAINLESS STEELThis extension Crossbar Boom Arm made of all Stainless Steel,total weight of 3.75kg 8.27lbs,which make it heavy duty and study enough to hold the large equipment in studioRecommended to use with heavy duty C Stand and light stand.Anti-corrosion, anti-rust and long-lasting,Durable and enough for long time use.. ADJUSTABLE LENGTHLength adjustable from 3.6 110cm to 8.2feet 250cm, it's much more flexible for you to fix the position of your light or softboxIt can also be rotated to 90 degree which allows you to capture the image under different angle.. UNIVERSAL INTERFACEEquipped with universal interface which can be mount on C-Stand and light stand easily, great support for most of photographic equipment, such as softbox,strobe flash, monolight,LED light,reflector,diffuser. Perfect to use outdoor and Studio indoor, giving you a great support to meet various photo or video shooting situations.. SANDBAGComes with a sandbag as free gift which allows you to easily control the counterweight and better stabilize your lighting setup.The balance of the weight is up to you,since you can freely change the weight of the sandbag to create angles of your photography.. NON SLIP HANDLEDesiged with Non-slip handle,more convenient to hold the arm while you fix the position of the accessory overhead. NOTEThe light stand and Grip Head and softbox are not included.

Heavy-Duty Stand Versatile Function This photography C-stand made of 100 solid stainless steel, the C-stand with refined design serves long-lasting durability for supporting heavy-duty photographic gears like umbrella, strobe, monolight, reflector, softbox, and camera and flash and more.. Adjustable Height The 3-section telescopic tripod can extend from 4.3 to 10 130 to 305cm for a wide variety of height configurations and fold down to 3.9 120cm for easy storage and carrying. The comfortable foam pad gives you a firm grip and prevents the tripod from slipping in transit. Tripod Stand with 360 CastersEquipped with 360 swivel casters for convenient mobility, this rolling tripod from Lapgood allows you to glide your heavy equipment on the floor without dragging and lifting. Step-on brakes lock the casters and keep the tripod stationary while in use. Rubber wheels protect the floor from scratches. Universal Compatibility Versatile MountingUniversal spigot mounts strobes, softboxes, reflectors, and more. Built-in turntable and locking module for quick positioning. Ideal for indoor outdoor use. Boom Arm Grip HeadBoom arm extends to 8.2 ft 250 cm with durable grip head for a secure hold. Non-slip sponge handle, anti-shock section, and 90 angle adjustment for precise positioning.

Material Made of Stainless Steel. Good load-bearing performance, protecting the grip head adapter corrosion-resistant and durable.. Features The grip head for C stand allows the arm to spin 360 degree. The wavy locking knob makes it more convenient to tighten and adjust the position.. Safety With excellent locking system for stability and security. Helping photographer to set up lights or other accessories easily on the C-stand, which avoids problems with staff cooperation.. Application 4 holes of different diameters allow any accessory with a 4mm 8mm 11mm 16mm mounting stud or tube, such as boom arm, flag reflector. And compatible with most of light stand.. Easy to Set Up Use Connect the extension arm to the light stand secure the boom arm in place and attach the accessory to the light stand via the grip head holder..

Premium Materials Robust Structure The SIRUI AM-DK01 professional overhead camera desk mount is crafted from high-quality aluminum alloy, featuring thickened tube walls and an enlarged tube diameter for enhanced stability. With a maximum height of 40 inches102 cmMaximum overhead shooting height reaches 29.53 in 75 cm, it provides reliable support, making it an ideal accessory for overhead shooting, live streaming, vlogging, stop-motion videos, and video conferencing. Sturdy Stable The camera mount for desk boasts excellent load-bearing capacity. The adjustable dual ball head joints are made of durable stainless steel for long-lasting performance. It can hold up to 11.02 lbs5 kg at a 30 tilt, 8.82 lbs4 kg at 60, and 6.61 lbs3 kg at 90, providing exceptional stability for professional use. Flexible Angles Smooth Adjustments The camera boom arm featuring 4 sections and 3 adjustable joints, a total of 6 points allow for 180 tilt and 360 rotation for versatile positioning. The dual ball head design ensures ultra-smooth adjustments, providing photographers with maximum flexibility to achieve the perfect angle and composition for any shot Reminder Hold Your Device While Adjusting to Avoid Accidental Drops. Wide Compatibility The swing arm camera mount features a top connector with a retractable safety pin and a 14 screw, along with 14-to-38 and 14-to-58 adapters, allowing seamless compatibility with DSLR cameras, ring lights, microphones, projectors, action cameras, webcams, tablets, and more Note Phone clamp not included in the package. Larger Opening C-Clamp Unlike traditional crab-claw clamps, this top down camera mount features an extra-wide C-clamp with a maximum opening of 2.36 inches 60 mm. Both contact surfaces are equipped with thickened rubber pads, providing enhanced grip and slip resistance. This design ensures a secure hold on the desk, even with heavier equipment, significantly improving stability and safety Please note This C-clamp supports clamping on flat surfaces only and is not suitable for clamping onto tubes.

Adjustable Height Solid The height of the microphone stand is adjustable from 42.1 inches to 68.5 inches by adjusting the knob, perfect for people in all age groups. It features upgraded supporting structures for better load-bearing capacity, holding your microphone in position.. Steady Tripod Stand The high-quality thickened steel poles enhance the exceptional stability and durability of this mic stand. Compared to other lighter stands that are easy to tip over, our mic tripod stand is as heavy as 4.0lbs, serving indoor and outdoor use.. Flexible Detachable Boom Arm The boom arm of the stand is adjustable from 16 inches to 30 inches in length and it can rotate 360 horizontally as well as up to 180 vertically. You can choose the best angle and length of performance by easily adjusting the knobs on the boom arm. Remove the boom arm and attach the mic clip, then you can also use it as a straight mic stand.. Portable Carrying Bag The package comes with a premium carrying bag and the floor mic tripod stand is easy to disassemble into several pieces which allows it to easily pack into the small carrying bag and fit anywhere, easy to transport and store.. Wide Compatibility Two different styles of mic clips in package are compatible with most types of microphones such as Shure SM58, Shure SM48, Shure PGA48, Samson Q2U, ATR2100x-USB, etc. The included metal 38 to 58 screw adapter is suitable for Blue Yeti, Snowball, Hyper X QuadCast, SoloCast, Shure SM7B, AT2020, Fifine AM8 and more..

Wide ApplicationApplicable to most photographic equipment, such as photography reflector, umbrella, monolight, backdrops and other photographic equipment. Adjustable StableAdjust from 5 ft150 cm to 10.6 ft325 cm. The center stand has built-in buffer spring, which can reduce the impact of sudden fall of the installed equipment and protect the equipment when adjusting the height. Heavy Duty C StandThis photography C-stand made of Stainless Steel, the C-stand with refined design serves long-lasting durability for supporting heavy-duty photographic gears. Sturdy Turtle BaseOur turtle base can increase stability and prevent scratches on the floor. It can easily load sandbags and Its foldable and detachable design is easy for transportation. Extension ArmHolding arm length is 4.2 ft128 cm. Equipped with 14 and 38 screws at both ends, the extension arm can mount most photographic accessories with ease. Grip heads enable you to keep the arm firmly in place and set different angles effortlessly.

HEAVY-DUTY STAINLESS STEEL CONSTRUCTION Made of corrosion-resistant stainless steel, can withstand harsh conditions. You can place it wherever you like. SATABLE ADJUSTABLE 3 legs at the bottom are spread in 120 degree which achive your equipment more stable. Adjustable center stand height ranges from height 59 in and Max height 130 in. Feel free to adjust the height for meeting different shooting demands.. EASY to ASSEMBLE Simple structure, Only take a singe minutes to set it up or take it apart. KITS INCLUDES 2 light stand, 2 boom arm , 4 grip heads.. WIDE APPLICATION Included 14-inch to 38-inch screw tip, applicable to most photographic equipment, perfect for mounting strobe lights, reflectors, umbrellas, softboxes ect.

EASY to ASSEMBLE Simple structure, Only take a few minutes to set it up or take it apart.. KITS INCLUDES 1 C-Stand Base, 1 Center Stand Column, 1 Extension Arm, 1 Baby Pin, 2 GripGoboKunckle Heads.. HEAVY-DUTY STAINLESS STEEL CONSTRUCTION Made of corrosion-resistant stainless steel, can withstand harsh conditions. This stand can withstand the weight of 44 lbs. You can place it wherever you like.. SATABLE ADJUSTABLE 3 legs at the bottom are spread in 120 degree which achive your equipment more stable. Adjustable center stand height ranges from height 59 in 150cm and Max height 120 in300cm. Feel free to adjust the height for meeting different shooting demands.. WIDE APPLICATION Included 14-inch to 38-inch screw tip, applicable to most photographic equipment.

Sturdy C-standC Stand adopts C-stand structure design,the bottom three legs are spread at 120 degrees,which is stable and safe,and can adapt to different terrain environments.The legs of C Stand Silver can be folded flat to save storage space.Non-slip rubber pads on the bottom to prevent scratches on the floor.. Adjustable Stable C-StandC Stand Black's height of the central bracket post can be adjusted from 2.4ft73cm to 6.9ft210cm,and the support arm length is 2.9ft88cm,which allows you to extend the C Stand to a maximum height of 6.9ft210cm.. Metal ConstructionSoonpho Heavy Duty C-Bracket is made of stainless steel,corrosion-resistant and durable,which prevents rusting, giving C Stand Photography a longer service life and super heavy-duty strength for photographers in all stages of use.. Wide ApplicationPhotography Light Stand's extension arm with 14 inch and 38 inch threaded end is suitable for most of the fixtures with A-type or T-type standard connection,such as flash,spotlight,camera,soft light,etc.. Package Content Sandbag1,Brackets3,Grip2,C-stand legs1,SP-A01 Hook1,Support arm1,Medium column1..

Camera desk mount stand Up to 27.56 inch center shaft height ,no limit shooting from any angle or distance. 29.53 inch super long extending arm, three stages free adjustments,challenge and inspire your creativity.. Compatible with ring light, DSLR camera, video camera, panel light, key light, webcam, and more. also also also The Pole top has 14 screw hole, you can mount other equipment.. 360 Ballhead adjust to any angle and 14 Screw allows you to expand your rig. And padded desk clamp expandable up to 5cm1.96 inch.. Aviation aluminum alloy material, extremely sturdy and durable, single-arm load-bearing capacity is up to 2KG4.41lbs--Suitable for almost all cameras.. This camera desktop overhead video stand suitable for baking, crafting, online lesson, document display, live stream broadcast, video recording and other creating top-down videophoto scenes.. NOTE Webcam, Panel light, Ring light, DSLR camera Not included..

HEAVY DUTY STAINLESS STEEL C STAND-- Built with durable stainless steel for better strength, corrosion resistance, and long-term studio use. The 25-30-35mm column structure provides reliable support for softboxes, reflectors, strobes, monolights, and video lights.. ADJUSTABLE HEIGHT UP TO 210CM 6.9FT-- The center column adjusts from 105cm to 210cm, giving you flexible height control for side lighting, overhead lighting, portrait photography, product photography, and video shooting setups.. 88CM BOOM ARM WITH 2 GRIP HEADS-- Includes an 88cm extension arm and 2 grip heads for precise positioning of reflectors, flags, softboxes, LED lights, and other studio modifiers. Ideal for flexible horizontal or angled lighting setups.. STABLE FOLDABLE TURTLE BASE-- The turtle base provides strong ground contact and stable support during studio use. Foldable legs make setup, breakdown, and storage easier for home studios, mobile photographers, and small production spaces.. BUFFER SPRING FOR SAFER ADJUSTMENT-- Built-in buffer spring helps reduce sudden drops when adjusting the stand height, protecting your lighting equipment during setup and breakdown. Package includes 1 C stand, 1 turtle base, 1 extension arm, and 2 grip heads.. EASY TO INSTALL PORTABLE DESIGN-- Compact size 27 x 9 x 97 cm and lightweight 6kg for easy storage and transport. Perfect for photographers on the go or compact studio setups..

To achieve optimal stability and prevent tipping, we recommend positioning the boom arm so it is parallel to and directly above one of the tripod's legs. This crucial step places the system's center of gravity directly over a primary support point, ensuring a secure and balanced setup.. Ultimate Versatility for Any Setup This mic stand floor transforms effortlessly into a standard mic stand, a boom mic configuration, or a tablet holder stand, making it an all-in-one solution for recording, streaming, podcasting, or live performances.. Customizable Height and Precision Angles Achieve the perfect setup with an adjustable height range from 30 inches to 72 inches, complemented by a flexible gooseneck and a 360 rotatable boom arm. These features provide precision positioning for your microphone, phone, or tablet, allowing you to adapt quickly to any environment, delivering reliable performance and convenience every time.. Sturdy and Reliable Stability Built with a durable triangular base featuring a 24.4-inch maximum leg span, a reinforced shaft, and thickened metal poles, this boom mic stand ensures exceptional stability, even when handling heavier equipment, making it a dependable choice for professional applications.. Exceptional Compatibility Designed for versatility, this stand includes a 38 to 58 screw adapter compatible with Fifine AM8, Hyper X QuadCast, SoloCast, Blue Yeti, Blue Snowball, etc. It also features a non-slip mic clip for dynamic microphones and a stretchable tablet holder accommodating devices from 4.7 to 13.0 inches, ensuring seamless integration into any setup.. Portable and Ready for Any Occasion Take your performance or recording setup wherever you go with ease. The included carrying bag provides a convenient and secure way to transport the microphone stand, ensuring all components are protected and organized. Whether youre traveling between studios, heading to a live gig, or setting up an outdoor shoot, this mic stand phone holder is lightweight yet robust, making it perfect for professionals on the move..

USBXLR Connectivity-AM8T comes with a dynamic microphone and a boom arm stand. Versatile PC gaming microphone kit with USB compatibility plug and play for PC in streaming or recording, without additional drivers. And also, while in XLR compatibility for mixer or sound card connection, the XLR studio vocal microphone is good at vocal, podcast, or musical instruments creation.. Vibrant RGB Light-The streaming microphone RGB illuminates your gaming setup with customizable RGB lighting for a visually stunning game experience. You can easily control the RGB modecolors or turn off by simply tapping the RGB button without making any complicated settings on specific software.. Enhanced Features-Featured -50dB sensitivity and cardioid polar pattern, the USB recording mic kit not easily pick up background noise for delivering clear audio. The PC gaming microphone USB kit includes a boom arm for easy positioning, mute button and gain knob for precise control, headphones jack for real-time monitoring, and headphone volume control while streaming or recording.. Decent for Gamers and Streamers-The XLR microphone designed specifically to meet the needs of gaming enthusiasts and streamers. Ideal for various applications, including gaming, streaming, podcasting, voiceovers, and more, which also works with popular streaming software like OBS and Streamlabs.. Recording Microphone Kit-The dynamic microphone is more convenient for working from home or going out for podcasts, and the complete accessories allow for faster recording work due to its simple straightforward assembly. External windscreen of the XLR dynamic microphone filter out plosive voice.. Durable Arm Stand - Made of sturdy metal with strong and elastic springs for stability, the arm stand hold the XLRUSB mic in secure support for stable vocal recording. Desk clamp features an anti-scratch pad and fits a desktop thickness up to 2 inch for easy installation usage You can adjust the position and angle of the arm stand for adjustment and movement of the microphone.. Tips 1 The desk clamp is suitable for desktop with a thickness of less than 2 inch. 2 AM8T package comes with dynamic microphone, Boom Arm Stand, C-Clamp, 8.2ft USB to USB-C Cable, User's Manual. 3 XLR cable NOT included..

A Must Stand for Content Creator What make it to be different from other phone tripod is that this iPhone tripod is designed to help your phone camera getting hard to reach spots and challenging angles. Horizontal mode is ultra-stable convenient for overhead video recording, filming, live streaming, baking and scanning vertical recording mode is nice for outdoor time-lapse shootings and long exposure photography with excellent stability even in a windy day.. Ultra-stable for Overhead Recording Heavy Duty aluminum tripod weighted 2.2lbs is adopted to construct this overhead iPhone tripod, it keep stable and well balanced even you extend the boom up to 25 inches and holding a heavy phone such as iPhone 14 13 12 Pro Max. It is your workspace, desks and kitchen counters ideal partner for live videos, cooking videos, taking pictures and more.. Easy to Use Sometime, it is awkward to adjust your camera angle using a small knob when you are live streaming or recording an important project. But with this iPhone tripod Built in 360 degree Rotation Hinge, you can easy switch your phone from Portrait to Landscape Mode for angle adjustment, you just need to simply grip the phone holder then swing tilt and spin the phone camera into perfect shooting angle.. Tall Versatile Tripod Support both horizontal and vertical video recording, this tall tripod is extendable from 20 to 71 inches to meet your various outdoor and indoor photography needs even in uneven ground or a windy day. Only 20inch when it folded, a quality carrying bag included for travel. Universal Compatibility The upgraded phone holder can be extended from 2.5 to 4.5 inches, fits all iPhone and Android cellphone even with a bulky case, such as iPhone 1514 Pro Max 13 Pro Max 13 Pro 13 12 Pro Max 11 Pro Xs Max Xr X 8 Plus, Samsung Galaxy S21 Ultra S20 Note 20 and more Android Cellphone. Comes with a wireless remote, you can start your recording or taking picture easily by using the remote..

Sturdy Extension Boom ArmThis extension grip arm made of 100 solid stainless steel,which provides great stability and safety for your studio video equipments.. 14 38 ScrewThis grip arm equipped with 14 38 head on each end,make it possible to add most of the equipments in your studio like Softbox,reflector,umbrella,diffusion,and so on.. LengthWith the length of 50inch128cm, it's much more flexible for you to fix the position of your light or softbox.... Widely UseThis extension grip arm is an ideal equipment for a C-Stand, light stand to hold flag, reflector, gobo, light, diffuser or other photography accessories.. NoteThe light stand and Grip Head and softbox are not included..

LENGTH ADJUSTABLEThis Extension Boom Arm with Length from 2.7ft 83cm to 5.2ft158cm It can be rotated to 320 degree which allows you to capture the image under different angle.. DURABLE METAL CONSTRUCTIONAll Metal material and heavy duty structure make it strong enough for long time use, always keep your photographic equipment in safe when in use.. The Crossbar Holding Arm is weight 4.6 lbs2.1kg, and max. load capacity is 11 lbs5kg.. WIDE COMPATIBILITYWith Universal 14 to 38 Universal Screw Adapter, which is a great support for most of photographic equipment, such as softbox, strobe flash, Monolight, LED light, and reflector. Perfect to use outdoor and Studio indoor, giving you a great support to meet various photo or video shooting situations.. 2-SECTION EXTENSION BOOM ARMSUPON boom arm is compatible for all light stand, and built with 2 sections to adjust the lenght, to work with strobe light, softbox, monolight, LED panel, reflector and other photography equipment of different sizes and shapes.. COME WITH A SANDBAGThe sandbag attached allows you to easily control the counterweight and better stabilize your lighting setup.The balance of the weight is up to you,because you can change the weight of the sandbag to create angles of your photography..

Sturdy C-standC Stand adopts C-stand structure design,the bottom three legs are spread at 120 degrees,which is stable and safe,and can adapt to different terrain environments.The legs of C Stand Silver can be folded flat to save storage space.Non-slip rubber pads on the bottom to prevent scratches on the floor.. Adjustable Stable C-StandC Stand Black's height of the central bracket post can be adjusted from 2.4ft73cm to 6.9ft210cm,and the support arm length is 2.9ft88cm,which allows you to extend the C Stand to a maximum height of 6.9ft210cm.. Metal ConstructionSoonpho Heavy Duty C-Bracket is made of stainless steel,corrosion-resistant and durable,which prevents rusting, giving C Stand Photography a longer service life and super heavy-duty strength for photographers in all stages of use.. Wide ApplicationPhotography Light Stand's extension arm with 14 inch and 38 inch threaded end is suitable for most of the fixtures with A-type or T-type standard connection,such as flash,spotlight,camera,soft light,etc.. Package Content Sandbag1,Brackets3,Grip2,C-stand legs1,SP-A01 Hook1,Support arm1,Medium column1..

Unparalleled Versatility Enjoy the freedom to capture shots from any angle with the patent gimbal, offering adjustable angles of 0-120 tilt and a full 360 panoramic rotation for limitless creative possibilities.. Elevated Photography Experience Reach new heights with an impressive maximum height of 2.3 meters, ensuring your shots stand out from the crowd. The 4-section leg design allows for easy portability with a collapsed size of 54cm and a lightweight of just 2kg.. Enhanced Stability Experience minimized camera shake during your shoots with the enlarged 28mm diameter center column, providing increased stability in horizontal positioning and reducing vibrations for sharper images.. Robust Load Capacity The 28mm ball head offers a secure load capacity of 10kg, allowing you to confidently mount your camera equipment. The oil-free damping design enables smooth and precise movements, while the 360-degree horizontal scale on the base makes capturing breathtaking panoramas effortless.. Flexibility in Composition Equipped with a detachable monopod, this tripod offers added flexibility when shooting in confined spaces, enabling photographers to achieve unique perspectives and compose their shots with ease..

Less Impact Dual SpringsThe heavy duty light stand comes with two spring buffers built in the pole, effectively minimizing the friction and impact when failling down, and ensuring the utmost protection for your valuable photography gears.. Superior 9.2FT Height RangeElevate your photography game with the telescopic light stand, supporting an ultra-high height range to meet diverse shooting requirements, from 3.5ft to 9.2ft1.1m-2.8m. Whether indoors or outdoors, tackle any photography height challenge at ease.. Robust Metal Locking MechanismThe photography light stand features a high-quality steel body with an anti-rusty coating for a better performance on heavy loadMax load up to 17.6LB. The solid metal locking promises strong, firm joints, providing steadfast support for your devices.. Triple Reinforced Base, Maximum StabilityExcept for a twist lock over its base, the steel tripod stand especially designs three individual block strips between the center stud and legs, adding more assurance against tipping or wobbling. Besides, three anti-slip rubber feet firmly grip the ground, further enhancing stability.. Versatile Screw Two-Way OptionsEquipped with a 14 and 38 adapter, this studio lighting stand is well-suited to strobe lights, reflectors, umbrellas, softboxes, speedlights, flashlights, spotlights and DSLR cameras. Moreover, choose between top-mounted or side-mounted installation for flexible lighting direction, catering to your unique shooting needs..

ailight overhead camera mount is designed with 3 sections extending poles, with a height-adjustable from 15.75-33.45 via twist locks, which provides the possibility for any overhead shootings and lighting. ? The extension holding arm with 2 sections is extendable from 11.8-20 30-51cm and able to mount horizontally on the desk light stand through fix clamp. the arm have 1kg2.2lbs load capacity. Easily Mount the camera stand on the edge of desk with the C clamp, desk thickness is between 0.2-inch to 1.97-inch. Inner rubber pads protect your desk from scratches and bring added security. Featuring standard 14 screws on both vertical and horizontal ball head, the table camera stand can hold camera, phone clip, LED light, webcam, and more. Suitable for making up, video recording, live streaming, Zoom meeting, online teaching, interviews, etc. ? Made of aviation aluminum alloy material, with the strong tube diameter 18.6-25.7mm, our overhead camera stand is more durable and stable to use and ensures a long time use without getting rusty.

Super Solid Stable StructureArticulating arm camera mount is crafted using high-quality cold-drawn aluminum tubing combined with a double locking C-Clamp. This ensures unparalleled robustness, stability, and a sleek appearance. Moreover, the durable ball head, made entirely from metal, boasts a unique CD texture for enhanced locking strength.. Scalable FlexibleThree-Sectioned Design Magic Arm's two upper sections have a 180 vertical adjustment range and full 360 horizontal rotation. The base vertical pole connected to the C-clamp is telescopic, extending up to an additional 9.5 inches. This ensures exceptional flexibility, making it effortlessly adaptable to various use cases and requirements.. Versatile Compatibility FunctionalityOverhead photography camera holder come with a metal ball head featuring a 14 screw and included 14-38 and 14-58 adapters, along with a baby pin, this mount offers widespread compatibility. Supporting a maximum load of 6.6lb, it's the prime choice for diverse multimedia equipment such as SLRDSLR cameras, webcams, and mics. Ideal for activities like video recording, live streaming, overhead photography, online meetings, and projection.. Double Locking Desk-FriendlyOverhead camera desk stand c clamp design prioritizes desk, the c clamp includes a protective soft pad to prevent scratches, and the dual locking screws with anti-slip pads guarantee a secure grip without causing damage.. Exquisite Package Easy StorageUnboxing our product feels akin to unwrapping a carefully curated gift, thanks to its thoughtfully designed packaging. Beyond the premium aesthetics, the interior boasts thick foam compartments for each component, ensuring everything remains scratch-free and pristine, even during storage..

USB Output Enables simple setup. USB studio recording microphone kit provides a direct convenient plug-and-play connection to pc and laptop without any additional hardware or drivers for recording vocals, podcasts and Skype. Studio microphone for recording vocals is never been easier to get high-quality sound for your voice and computer-based audio recordings. Incompatible with Xbox and Phones. Excellent Sound Quality With rugged construction for durable performance, the vocal recording microphone, USB condenser mic for PC,offers a wide frequency response and handles high SPLs with ease. Ideal for projecthome-studio applications. The cardioid condenser capsule captures crystal-clear audio from the front and avoid ambient noise when communicatingcreatingrecording. Comes ready to go with a desktop mic boom arm stand and 8.2ft USB cable, you're guaranteed to get great-sounding results.. Durable Arm Set The podcast microphone bundle with versatile and sturdy broadcast suspension boom scissor arm with 180 up and down rotation, 135 forward and backward extension for optimal adjustment, for capturing your voice in podcast or voiceover. The double pop filter attached on the music recording microphone provides two layers of dissipation, removes the rush of air, minimize the popping sounds or cancel noise that can compromise your recording, great for studio as well as home use.. Easy to Attach The streaming microphone for PC includes adjustable boom studio scissor arm stand that features a heavy-duty combo mount consisting of a sturdy C-clamp and a detachable desktop mount. With 13 fixed horizontal arm and offers a 30 reach, the low-profile, table-hugging design of audio recording microphone allows on-air talent to perform without facial obstruction to record in podcasting or make dubbing sounds for videos, use voice chat in Discord or online conference on Zoom or Skype.. The Accessory Package Includes The studio microphone music recording comes with practical accessories for you to use in most of recording. The scissor arm stand is made out of all steel construction, sturdy and durable, a studio-grade shock mount, a double pop filter, premium 8.2' USB cable, a podcast PC gaming microphone, a user manual and friendly Technical Support..

SECURE ROBUST The 10' Century C-Stand Kit is ideal for cinema still studios, offers stability strength for light stand photography modifier support with 2-tier spring loaded riser columns baby pin on top. VERSATILE COMPACT DESIGN This Lighting C Stand features removable turtle self-locking base legs, 120-degree lock position, nested storage for multiple C Stands. NESTING CAPABILITY UNIQUE STAGGERED LEG DESIGN The C Stand Frame allows multiple Photography Light Stands to be used nearby, and the lower leg to slide under objects, maximizing studio space efficiency. ENHANCED STABILITY The unique 'Turtle Base' design ensures a shallow center of gravity, preventing tipping when secured with saddlebag-style sandbags, perfect for a C Stand with boom arm. COMPREHENSIVE SUPPORT FLEXIBILITY This Boom Stand offers a 40 extension grip arm with 58 diameter, and GripGoboKnuckle Head combination, allowing for precise, adaptable support of light modifiers, arms, scrims, and more in C Stand photography. PACKAGE INCLUDES - Folding Turtle Legs, Two Tier Rise Center Column, 2x GoboGripKnuckle Heads, 40 Steel Arm Dowel, Baby Pin. Baby Pin stud for angular mounts. No further features available.. No further features available..

Versatile C-Stand The Godox Double Rise 8.8 Feet C-Stand combines a durable C-stand with a 50-inch arm and grip head set for versatile use, inside or outside of the studio. Aluminum Body The aluminum construction will hold up to even the harshest of environments. Steady Stand The stand has a low center of gravity, suitable for mounting heavy equipment without tipping. Leg Design The legs feature a staggered design, which allows C-stands to be positioned close to one another, and are suitably shaped for draping saddlebag-type sandbags over. Arm and Grip The included arm and grip head allow for mounting and placement of gobos, small reflectors, and small light fixtures.

Sturdy C Stand BaseIt is designed with C-shaped 3-leg structure, 3 legs at the bottom are spread in 120 degree, stable and safe. Sliding legs can be folded flat for space-saving storage. Non-slip rubber pad on the bottom, prevents scratches on floors. Adjustable Stable C-StandHeight of center stand column can be adjusted from 4.92ft150cm to 10.8ft330cm, Holding arm length4.2ft128cm. The center stand has built-in buffer spring, which can reduce the impact of sudden fall of the installed equipment and protect the equipment when adjusting the height. Metal ConstructionSoonpho C-stand heavy duty made of stainless steel material, corrosion resistant and long-lasting, avoiding rusting, which gave it longer service time and exceptional strength for heavy-duty. Wide ApplicationExtension arm with 14 and 38 threaded ends are compatible with most equipment such as photography studio video reflector, umbrella, softbox, overhead shooting and monolight. Package Contents1C-Stand, 1Holding Arm, 2Grip Head, 3Fish Mouth Clip, 1Sand bag, 1 Upgraded Carrying Bag. The detachable structure makes carry very convenient. Comes with a carrying bag, very easy for you to carry around.

C STAND WITH WHEELS KIT PACKAGE INCLUDES 3Metal Swivel Caster,1C-Stand Base,1Holding Arm,2Grip Head,3Fish Mouth Clip,1Sand bag,1 Upgraded Carrying Bag. The detachable structure makes carry very convenient. Comes with a carrying bag, very easy for you to carry around. Monolight, reflector, umbrella are NOT included. HEAVY DUTY C STAND It is designed with C-shaped 3-leg structure, 3 legs at the bottom are spread in 120 degree, stable and safe. Sliding legs can be folded flat for space-saving storage. Non-slip rubber pad on the bottom, prevents scratches on floors. C-STAND ADJUSTABLE AND STABLE Height of center stand column can be adjusted from 4.92ft150cm to 11.3ft345cm, Holding arm length4.2ft128cm. The center stand has built-in buffer spring, which can reduce the impact of sudden fall of the installed equipment and protect the equipment when adjusting the height. FLEXIBILITY AND SECURITY OF WHEELSThe heavy duty c stand with casters equipped with step lock system to lock and release the wheels, its step on lock can make sure the security when using this wheels set Its rubber base is perfect for its non-slip design. HEAVY DUTY C STAND WIDE APPLICATION Designed with 14-inch to 38-inch screw tip, applicable to most photographic equipment, such as photography studio video reflector, umbrella, monolight, backdrops and other photographic equipment. C STAND CONVENIENT CARRYING The c stand heavy duty is a detachable structure makes transportation very convenient. Comes with a carrying bag, very easy for you to carry around NOTE When you adjust the angle under the conditions that the weight on both sides of the joint head is not balanced, it will damage the screw that connects the two halves of the joint. SO PLEASE hold the rear part of the arm to keep the arm balanced firstly before adjusting the angle.

Stainless Steel Heavy-Duty C Stand Made of stainless steel precision casting, it has strong load-bearing capacity. The built-in buffer springs protect the device when adjusting the height. Suitable for supporting heavy photographic equipment such as umbrellas, softboxes, reflectors and flashes.. Foldable Stable C Base When the base is opened, the three legs are spread out 120 degrees, and the C-shaped base is more stable. There are anti-skid rubber pads on the bottom of the three legs to prevent the bracket from slipping or scratching the floor.. 360 Rotatable Grip Head The grip head holds the boom arm tightly and allows 360 adjustment of the boom arm angle. The 3 different sized holes on the grip head are compatible with other sized boom arms.. Wide Compatibility The boom arm has 14 and 38 screws, which are suitable for most photography equipment.. Extendable Height The height adjustment range of the C-bracket is 4.9ft-10.8ft 150cm-330cm. The length of the boom arm is 4.1ft 126cm.. Package List 1Central Pole, 1C Base, 1Boom Arm, 2Grip Gead..

? Make your voice sound better in the podcasting studio. This 360 rotatable microphone boom arm allows you to get the perfect mic placement much easier and with better posture.. - - With a convenient cable holder, this mic boom arm saves your desktop the mess of tangled cables, frees up a lot of space on your desk, and feels much more professional.. ? Our mic arm stand features sturdy suspension springs that hold your microphone steady in any position, preventing shaking, and making your recording much faster.. This microphone arm stand is made for your convenience. It comes with a strong C-clamp for firm attachment to your desk and has a practical folding design for fuss-free storage and transportation.. ? Our microphone shock mount is compatible with most standard mics with a standard 58 or 38 threading and makes a must-have accessory for any radio or home recording studio..

? Designed to help optimize your voice during podcasting, gaming, or streaming this microphone arm works on a desk at home or a podcasting studio with a 360 adjustable arm that rotates to your needs.. - ? Each boom mic arm comes with a clip-on cable holder to help free up space and minimize the mess on your desk which creates a clean, professional look that also keeps your space clear of tangled wires.. ? ? Our desk microphone arm is designed with sturdy suspension springs that support up to 1kg of mic weight, so you can keep it from shaking, rattling, or moving during recordings for enhanced clarity.. This microphone arm stand features a strong C-clamp that attaches to the edge of your desk without shifting or moving during use. It also lets you fold it away for quick, fuss-free storage when youre on the go.. Arm microphone accessories microphone shock mounts and flow that is compatible with 38 to 58 screw adapter and 38 to 14 screw adapter at home using professional recording studios, product demonstrations, or video games setups you can easily use..

Spring Cushioned Heavy Duty StandBuilt-in spring cushion protects your equipment, perfect for mounting LED video lights, ring lights, photo lights, strobes, softboxes, reflectors and other photographic equipment. Load Capacity 22lb 11kg.. Reversible 14 to 38 AdapterUniversal screw adapter features 14 and 38 threaded ends for compatibility with different fittings and fixtures. Three-way mounting interface allows you to mount vertically and horizontally.. Strong ConstructionThe light stand is made of 101 tough stainless steel, which is very durable and resistant to corrosion and moisture, suitable for outdoor shooting assignments.. Adjustable Height93.8cm - 280cm Adjustable, this telescopic stand has 4 sections with a wide range of heights for flexible positioning. Locking knob secures the stand with incredible strength.. Foldable DesignThe light stand can be folded into a compact size for easy storage and transportation..

Versatile Extension Arm Measuring 22 inches 56 cm , this grip arm features a 58 Stud with 14 and 38 screw tip on each end, making it compatible with various studio video equipment.. Sturdy Metal Construction Crafted from heavy duty metal, this extension arm offers exceptional strength, stability, and safety for your photography accessories.. Attach with Grip Head Ideal for C-Stands, light stands, and more, this grip arm supports banners, reflectors, lights, diffusers, and other photography gear with ease.. Noted Boom Arm only, the light stand and grip head are not included..

Versatile Adapter This heavy-duty 2.6-inch grip head swivel holder offers 360 rotation, providing maximum flexibility for positioning your photography and video equipment with precision.. Features multiple mounting options Accepts accessories with 12, 14, 38, or 58 mounting stud or tubing, such as grip arms, scrims, flags and other accessories, useful for for any photography or video production needs.. Widely Compatibility Attach with C stands, light stands, boom arms, and other photographic equipment, this adapter is perfect for professional photographers, videographers, and studio setups.. Secure Locking System Features an excellent locking mechanism for stability and safety, ensuring your gear remains firmly in place.. Durable Construction Built with a robust aluminum alloy construction, this adapter ensures durability and stability, even when supporting heavy gear like lights, cameras, and boom arms..

Heavy Duty Stability Crafted from premium stainless steel, this c stand supports up to 22lbs. The triple-riser design with locking mechanisms ensures rock-solid stability for your professional studio setup.. Professional Photography Light Stand Extends from 5.2ft to 10.8ft height with a 4.2ft boom arm. Perfect for mounting softboxes, LED lights, reflectors, and other photography equipment.. Studio-Grade Design Features quick-release legs with rubber feet for enhanced grip. The weighted base with sandbag provides extra stability, while the turtle-base design allows seamless height adjustments.. Professional Photography Light Stand Extends from 5.2ft to 10.8ft height with a 4.2ft boom arm. Perfect for mounting softboxes, LED lights, reflectors, and other photography equipment.. Portable Studio Solution Collapsible design with included carrying bag for easy transport. All components are detachable, allowing quick setup and breakdown for on-location shoots..

Heavy Duty Stability Crafted from premium stainless steel, this c stand supports up to 45lbs. The triple-riser design with locking mechanisms ensures rock-solid stability for your professional studio setup.. Professional Photography Light Stand Extends from 3.6ft110 cm to 6.8ft210 cm height with a 2.8ft87 cm boom arm. Perfect for mounting softboxes, LED lights, reflectors, and other photography equipment.. Studio-Grade Design Features quick-release legs with rubber feet for enhanced grip. The weighted base with sandbag provides extra stability, while the turtle-base design allows seamless height adjustments.. Versatile Camera Mount System Includes 2 grip heads with 360 rotation capability and 3 metal clips. Compatible with most studio lighting equipment, making it ideal for professional photographic lighting.. Portable Studio Solution Collapsible design with included carrying bag for easy transport. All components are detachable, allowing quick setup and breakdown for on-location shoots..

Heavy-Duty Light StandMade of 100 robust steel with a black anti-corrosion coating, this heavy-duty C-stand can mount strobes, monolights, reflectors, softboxes, umbrellas, and other photography gear with exceptional stability. The inner buffer spring can reduce the impact caused by sudden drops. Adjustable Height Extension ArmThe 3-section center column is adjustable from 4.8ft to 10ft 146cm to 305cm with a foam grip to prevent slipping in transit. The 3.5ft 108cm extension arm with a 14 and 38 mounting screw on both ends is compatible with most equipment. Metal Grip HeadsThe grip heads can lock the extension arm with a firm grip and allow flexible angle adjustment. Four holes in each grip head can fasten rods, arms, and umbrella shafts in different diameters. Foldable Turtle BaseTurtle base with non-slip pads allows sandbag placement for adding stability without scratching the floor sandbags not included. Legs and can be folded flat for space-saving storage. Package Contents2 C-Stand, 2 Turtle Base, 2 Extension Arm, 4 Grip Head.

StableSturdy for Ligt Mics With integrated all metal body and strengthened screws, this microphone stand boom arm is very sturdy, ensuring stability, no shaking. Its perfect for gaming, podcasting, recording, and streaming Microphone not included.Just fit for light mics,not fit for heavy-duty or studio mics. LowHigh Profile Mic Arm Design This adjustable microphone stand features a low profile design that extends from the behind of your computer screen, max extension 29, and providing an unobstructed view during intense gaming sessions.It's also able to be used as high angel mic arm.. Save Space Its much smaller than most of other mic stands in market.The maximum extension is 29 inches, suitable for large of office desktops. The sort of fold-away style of it makes it very unobtrusive when its folded for saving desk space.. DIY Customized Adjustment Its available to adjust from multiple angles. And with 1X hex wrench, you can adjust . Extended to 29 inches, this mic arm fits for your long large office desktop. With 360base hinge design, you can rotate mic as you like. Doesn't have to be super tight in order to support the weight of my microphone.You can randomly adjust to the angel and height you want.. Cable ManagementThis microphone boom stand is equipped with cable managements in order to organize your microphone cables. Neat arrangement of cable is impossible to cause excessive pulling or resulting in unexpected use, keeping your streaming setup cleaner.. UpgradedTwo Threads This one is upgraded version with strenghthened screws,staying steadily and durable in comparasion with gas arm. It comes with 3858 mount threads to accommodate different holders,fit for almost mics on marketexcept minority mics with 14 thread such as NOT fit for Blue Yeti ORB,Yeti X,Shure MV7i,Shure Beta58A etc..

Extendable Height The Turtle base C-stand has chrome steel construction and a 3-section column with 2 risers that support fully extend from 5 feet 150cm to 10 feet330cm. Foam Grips help avoid sliding and hand hold. ?. Silver Extension Grip Arm 2.5 Grip Head A staple of any film, video or photo production set. The 40 non-skid bar slips neatly into an optional grip head mounted to the stand allowing you to offset it and cantilever lights, light modifiers, scrims, flags, cutters, and other lighting accessories onto C-stands or butterfly frames. The 2.5 grip head with a large ergonomic handle hold each in a precise position, making it a common piece of equipment on most any set.. Stainless-Steel Heavy Duty Turtle Base Photography Light Stand All metal construction provides solid support for a wide range of lighting and gear weights. The finish resists all weather conditions for outdoor shooting and will not rust over time. The base has the classic wide 120 Spread, stable C-type legs that accommodate easy sandbagging and straddling of obstacles, folding flat for easy transport and storage.. Versatile Function This photography C-stand made of 100 solid stainless steel, the C-stand with refined design serves long-lasting durability for supporting heavy-duty photographic gears like umbrella, strobe, monolight, reflector, softbox, and camera and flash and more to perfectly make indoor or outdoor shooting.. Package List The complete package is 1C base,1central pole, 1boom arm, 2grip head, 1sandbag, 3 mouth clip, 1 durable storage bag..

Heavy-Duty Versatile High load-bearing capacityMade of 100 solid stainless steel, the C-stand serves long-lasting durability for supporting heavy-duty photographic gears like umbrella, strobe, monolight, reflector, softbox, and more. 2 Metal Grip Heads with 4 Holes Grip heads lock the arm and allow angle adjustment. 4 holes in different sizes are compatible with various equipment.. Turtle Base Turtle base with non-slip pads allows sandbag placement for adding stability and prevents scratches on floors. Sliding legs and can be folded flat for space-saving storage. Adjustable Height Extension Arm The center column with three sections can be adjusted from 4.8ft to 10.8ft 149cm to 330cm as needed. Foam grip prevents the stand from slipping. Extension arm with 14 and 38 threaded ends are compatible with most equipment. Package Contents C Stand, Stand Base, 2 Grip Heads , Extension Arm.

Stainless Steel ConstructionMade of corrosion-resistant stainless steel can withstand harsh conditions, which gave it longer service time and exceptional strength for heavy-duty.. Stable Adjustable3 legs at the bottom are spread in 120 degrees which achieves your equipment more stable. The adjustable center stands height ranges from height 59 in and Max height 130 in. Feel free to adjust the height for meeting different shooting demands.. Easy to assembleThe height of the C-bracket can be adjusted from 1.5M5FT to 3.2M10.5FT. Its solid locking capabilities ensure the safety of your lighting equipment when in use.. Widely usedIncluded 14-inch to 38-inch screw tip, applicable to most photographic equipment.. Upgraded Package1 x C Bracket, 1 x Crossbar, 2 x Runner, 3 x Fish Mouth Clip, 1 x Upgraded High-quality Carrying Bag.

Heavy-Duty Light Stand Made of 100 robust steel with a black anti-corrosion coating, this heavy-duty C-stand can mount strobes, monolights, reflectors, softboxes, umbrellas, and other photography gear with exceptional stability. The inner buffer spring can reduce the impact caused by sudden drops. Adjustable Height Extension Arm The 3-section center column is adjustable from 4.8ft to 10ft 146cm to 305cm with a foam grip to prevent slipping in transit. The 3.5ft 108cm extension arm with a 14 and 38 mounting screw on both ends is compatible with most equipment. Metal Grip Heads The grip heads can lock the extension arm with a firm grip and allow flexible angle adjustment. Four holes in each grip head can fasten rods, arms, and umbrella shafts in different diameters. Foldable Turtle Base Turtle base with non-slip pads allows sandbag placement for adding stability without scratching the floor sandbags not included. Legs and can be folded flat for space-saving storage. Package Contents 1 C-Stand, 1 Turtle Base, 1 Extension Arm, 2 Grip Head.

2-In-1 Stand Boom This 2-in-1 light stand with a convertible boom arm offers flexibility and versatility for photography device mounting. Use the screw knobs to effortlessly adjust the height, secure the stand and convert the center column into a transverse boom arm. A mid-level spreader attached to the tripod legs maximizes the stability. Adjustable Light Stand Extendable Boom Arm With a telescopic center column, this light stand can extend from 3.6 to 9.7 110.5 to 297cm and fold down to 3.2 96.5cm for ease of storage and transportation. The front section of the boom arm is stretchable from 0.8 to 3.8 26 to 115 cm and rotatable at 180 for optimal angles. Durable Metal Build The black anodized aluminum alloy construction is robust and corrosion-resistant for use in outdoor environments. A sandbag can work as a counterweight to balance the boom arm when mounting a heavy light fixture sandbag arrives empty. Built-In Spring Cushion Spring cushions inside the center column can effectively offset the impact caused by sudden drops and protect your device from harm. Dual Mounting Threads The reversible spigot features two mounting threads 14 and 38 that are compatible with a wide array of photographic equipment, including ring lights, LED video lights, strobes,monolights, softboxes, reflectors, and umbrellas.

Adjustable Height Extension Arm The 3 section center column is adjustable from 4.9ft to 10.13ft 149 cm to 309 cm, with a maximum load of 44lb20kg and a foam handle to prevent slippage during use or transport. The 3.9 ft 120 cm extension arm with 14 and 38 mounting screws on both ends offer great compatibility with most equipment weighing up to 17.6lb8kg. Flexible Sliding LegsThe 3 legs at the bottom of the C stand can each slide up and down to accommodate complex uneven shooting surfaces such as stairs. There are also non slip rubber pads on the feet to enhance stability and avoid scratches, providing sturdy and flexible support for most photographic equipment, ideal for outdoor shooting and professional photography. Heavy Duty Light Stand Made of 100 robust stainless steel, this C stand can mount strobes, monolights, reflectors, softboxes, umbrellas, and other photography gear with exceptional stability. The inner buffer spring can reduce the impact caused by sudden drops. 2 Metal Grip Heads The grip heads can lock the extension arm with a firm grip and allow flexible angle adjustment. Four holes in each grip head can fasten rods, arms, flags and umbrella shafts in different diameters. Package Contents 1 x C Stand, 1 x Extension Arm, 2 x Grip Head.

Widely used C-stand serves long-lasting durability for supporting heavy-duty photographic gears like umbrella, strobe, monolight, reflector, softbox, and more. It can be used in the studio, outdoors, and in the field. Can meet various photo and video shooting requests. High quality material Unlike ordinary aluminum alloys, stainless steel can effectively prevent wear and rust. The lock function allows you to effectively secure the stand and ensure the safety of your photographic equipment.. 2 Metal Grip Heads with 4 Holes Grip heads lock the arm and allow angle adjustment. 4 holes in different sizes are compatible with various equipment.. Adjustable Height Extension Arm 3 legs at the bottom are spread in 120 degrees which achieves your equipment more stable. The adjustable center stands height ranges from height 59 in and Max height 130 in. Extension arm with 14 and 38 threaded ends are compatible. Feel free to adjust the height for meeting different shooting demands.. Easy to carry and install It will be easy to install and remove in just a little time. Foldable and convenient to carry..