FUNCTIONThis bushing installation tool kit for use with Hendrickson Tri-Functional Narrow Beam Bushing Kits. This kit will easily remove and install the Hendrickson Vantraax Tri-Functional bushing while the suspension remains on the trailer. To ensure a suspension system is properly operating with minimal wear and tear, this narrow beam bushing installation tool aids in the installation of new suspension bushings.. OEM STANDARDThis narrow beam bushing removal tool is manufactured in strict accordance with OEM standards and is made of higher quality and more durable steel metal materials, which has higher strength and durability, thereby extending the service life of the bushing installation tool. At the same time, the functionality and compatibility remain unchanged, aiming to provide you with a better product experience.. APPLICABLEFor Dana Webb RFS-20,23,25,30 Trailer Air Ride Suspension. For Hendrickson HKHS190-230 HT190-230-250-300 Air Suspension. For Hendrickson Intraax AA-EDTNTT Vantraax HKANTT Air Suspension. For Hendrickson Intraax AA-LNLNLSEDL HKA-LRLNL Air Suspension. For Hendrickson T-4691517 Air Suspension. For Hendrickson Toughlift FMWB LK Lift Axle Air Suspension. For Watson Chalin TA250300T Trailer Air Suspension.. REPLACE PART NUMBERReplace part no. of this bushing installer remover kit is S-24736, S24736. Cross Reference For BWP HE9BL-T, Euclid E-14634, Power Products 22-924, TRB5914-T, 500410, AA00003037.. REPLACE YOUR OLD BUSHING INSTALLATION TOOLOur bushing installation tool kit is made of high-grade steel material, which is strong and durable to extend the service life of the product. It is impact-resistant and has a black oxide coating to prevent oxidation and enhance your product experience. Pay Attention Please ensure that threads on tool are well lubricated before and during use to avoid damaging threads. The Large capacity lubricating grease helps you better complete your work.. 100 SATISFACTORY SERVICESAYNO can provide technical suggestions for the bushing installation tool to solve problems during installation or use. If you have any questions or are not satisfied, please email us and we will help you solve the problem perfectly - 36 months warranty and 24 hours service..

Direct replacement for Hendrickson S21307 or S-21307, Cross References Compatible with Hendrickson S-21307, Compatible with Meritor R309575, Compatible with Sirco SH2034, Compatible with Tiger Tool 15040, Compatible with BWP HE9AA-T, Compatible with Dayton 334-936, Compatible with Euclid E-9575. Applications Compatible with Automann TS TRB5912, Compatible with Dayton TS 334-1576, Compatible with Euclid TS E-10729A, Compatible with Flagg TS HT245, Compatible with Gaff TS 13628 Compatible with Hendrickson TS S-24691. Durable Construction With High-Quality Materials Provides Long-Lasting Use And Hassle-Free Installation Process. Allows Easy Removal And Installation Of Bushing While Suspension Remains On Trailer Which Saves Time And Effort. Package Includes 1 Set Of Bushing Installation Tool And Lubricant Ensuring Smooth Operation When Properly Lubed.

EFFICIENT MAINTENANCE The Tiger Tool 16002 makes removing brake anchor pins and bushings a breeze on nearly all 16-12 S-Cam trailer and tractor Q brake systems, significantly reducing service time and ensuring a safe, damage-free process.. WIDE COMPATIBILITY Commonly found on class 6-8 transportation trucks and equipment. For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.. In the event you are servicing a stamped spider, a punch and chisel may be required to remove the bushing.. ROBUST CONSTRUCTION DESIGN Featuring a sturdy C-frame with a 10-ton capacity, the Brake Anchor Pin Press is built from high-grade steel, ensuring both strength and longevity. Its compact design allows for efficient service directly on the vehicle, bypassing the need to remove the hub and dust shield, saving time, and avoiding the hassle of dealing with rusted or broken dust shield bolts.. SIMPLE ACCESSIBLE OPERATION No need for specialized tools the 16002 operates with a standard 78 hex drive and includes a bushing removal adapter. This design simplicity ensures that removing both anchor pins and bushings is straightforward, making it accessible to all technicians.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

REFERENCE OE NUMBER 15030.. COMPATIBLE MODEL This Pin and Bushing Adapter Service Kit Replacement for Automann MR656UB, MR656, MR782, MR714E, MR714 for BATCO 44090 for Dayton RB-205U, RB-268, RB-205, RB-234 for Dyco D046, D46, DT1155 for Euclid E-8804 for Flagg RB268, RB205UB, RB235, RB268, RB205, RB234, RB260 for Freightliner 1613962000, 1616412000, 1618035000, 6813250150, 6813250250 for Gaff 11083 for Hendrickson 51209, 52296 for International 3538115C1 for Meritor MR782 for Peterbilt 52296 for World America WA12-5136.. PACKAGE INCLUDE The Pin and Bushing Repair Kit is designed for removing and installing pins and bushings for a variety of heavy-duty trucks. Simply use it with your existing 15000 Pin and Bushing Starter Kit. The kit includes 1x Spacer Tube, 1x Cylinder Adapter, 1x Push Adapter, 1x Pull Adapter, 2x Tube Cap, 1x Socket Driver, 2x Adapter Pin.. SEALED DURABLE The pin and bushing repair kit is precision-engineered to ensure optimal contact between the adapter and bushing sleeve, ensuring the assembly remains secure under intense pressure and vibration. Made of good-grade metal with a special surface treatment to withstand harsh environments, it remains in optimal condition for extended use.. CUSTOMER SERVICE We value your shopping experience and will offer a one-year worry-free return and refund policy. If there are any problems with our pin and bushing repair kit, please contact us in time and we will help you solve the problem..

Item DimensionsFeaturing a 11-12 driver, our pneumatic bushing driver set is ideal for applications with limited access, and can easily reach tight spaces, a time-saving and efficient tool, simplifying truck and trailer maintenance and repair tasks.. Versatile ApplicationBeyond its primary function of removing and installing 1-38 anchor pin bushings and stuck anchor pins, this set is also highly effective for removing truck leaf spring bushings, making it a versatile tool suitable for various maintenance tasks.. Easy to UseEquipped with a double-sided cone that snaps onto the driver, our bushing driver set facilitates seamless bushing removal and installation. Use the flanged end for installation and the tapered end for removal, simplifying the process and eliminating the need for multiple tools.. Premium QualityAnchor pin bushing removing driver kit made of high-quality Alloy Material, it is strong, wear-resistant, and durable, featuring stable characteristics and reliability.. Packing List29090 Anchor pin bushing driver set is applicable for trucks, and trailers and includes an 11-12 in anchor pin and a 1-38 in anchor pin bushing..

PARTNUMBER15030. VEHICLE FITMENT The pin and bushing adapter service kit is fit for Automann MR656UB, MR656, MR782, MR714E, MR714. For BATCO 44090. For Dayton RB-268, RB-205U, RB-268, RB-205, RB-234. For Dyco D046, D46, DT1155. For Euclid E-8804. For Flagg RB268, RB205UB, RB235, RB268, RB205, RB234, RB260. For Freightliner 1613962000, 1616412000, 1618035000, 6813250150, 6813250250. For Gaff 11083. For Hendrickson 51209, 52296. For International 3538115C1. For Meritor MR782. For Peterbilt 52296. For World America WA12-5136. GOOD QUALITY The 15030 Pin and Bushing Adapter Kit is crafted from high-grade quality steel and treated with a black oxide finish for anti-rust and anti-corrosion protection. Precision-engineered with robust components, this durable adapter delivers reliable strength and longevity, making it an ideal solution for heavy-duty vehicle maintenance applications. PACKAGE INCLUDE The leaf spring pin and bushing adapter service kit is included spacer tube x1, cylinder adapter x1, 3.25 tube cap x1, push adapter x1, pull adapter x1, adapter pins x2, 2.625 tube cap x1. NOTE The adapter kit requires the 15000 Pin and Bushing Starter Kit for operation. WORRY-FREE POLICY We stand behind the quality of our product with a worry-free return and refund policy. If you have any questions, please contact us with the frame number, and we will provide you with the most correct advice. Buy with confidence.

UNIVERSAL SIZING This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.. COMPLETE SET The discs sizes range from 18mm 0.7 inches all the way to 65mm 2.51 inches in 1mm increments plus 74mm 2.91 inches. All discs are connected with a 12mm 0.47 inches shaft and screw which quickly connects to a 180mm 7.08 inch handle, making for a complete and effective wheel bearing driver set.. EASY OPERATION This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.. HEAVY-DUTY DURABILITY With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.. PROTECTIVE CARRYING CASE Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Versatile Bushing Removal Tool This pull and press sleeve kit by Orion Motor Tech provides everything you need to quickly and easily remove or install wheel bearings, bushings, and seals on most cars with an LCV or HGV engine. Universal Press and Pull Sleeve Kit This complete bushing press kit includes 22 sleeves with a bore diameter ranging from 34 to 80 mm and 5 pulling shafts in the sizes of M10, M12, M14, M16, and M18, fitting a variety of wrenches and drivers. Notched Sleeve Design Each sleeve is designed with a notch to securely catch the edge of the bushing while allowing clear visibility of the position of the bushing you're working on. Durable Construction Made of premium carbon steel, this press sleeve kit provides strong and dependable long-lasting service the pulling spindles are heat treated and blackened for superior strength and corrosion resistance. Compact Portable This 27 piece bush bearing insertion tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop.

OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installationremoval adapters. Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool. Completes the job in a fraction of the time that traditional methods take. Saves an average of 45 minutes per bushing 4 per vehicle on flat rate of 1.5 hours per bushing - a huge time savings. No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.

Professional Efficiency Dramatically reduce shop downtime by swapping leaf spring pins and bushings without removing spring hangers. This 15030 adapter cuts labor by hours for Freightliner, Peterbilt, and Kenworth maintenance.. Maximum Extraction Power Delivering up to 20 tons of hydraulic pull, this leaf spring pin bushing adapter service kit handles seized or rusted components with ease. Engineered for high-torque environments and stubborn suspension repairs.. Perfect Compatibility Specifically designed to function with the 15000 Starter Kit. Seamlessly replaces or installs leaf spring pin sockets and bushings. Ideal for Class 8 heavy-duty trucks and versatile fleet maintenance.. Heavy-Duty Industrial Build Crafted from high-grade steel with a corrosion-resistant black oxide finish. This bushing installer tool is built for longevity and precision in professional garage settings, resisting wear under extreme pressure.. Professional Grade ROI A reliable, cost-effective alternative to expensive OEM tools. Provides specialized performance for suspension bushing puller tasks, ensuring a high ROI for mechanics and truck fleet owners..

Front engine subframe bush tool for VAG vehicles with an aluminium steel front subframe.. Designed to be used in-situ, although many can also be used in a workshop press if circumstances require.. Part of a range of vehicle specific tools for the removal and fitting of bushes and ball joints without having to remove suspension legs, subframes, wishbones and trailing arms etc from the vehicle.. Subframe bush number ref. 3315001 3314701. Alternative to VAS6779A. Subframe number ref 5Q199315Q.

Concrete Surface Prep RestorationIt can create CSP 4-5 roughness. Best for small area concrete repair and patch, roughen and pulverize concrete to increase the new coating bonding effectiveness.. Fit With SDS Plus Rotary HammerSDS Plus 3810mm diameter shank bushing tool, Fit with SDS Plus rotary hammer. Pack of 1 pcs Pack of 1 pcs sds plus bushing bit. Size5 58 inch overall length, 1-141-14 inch square bushing head. Durable Overall Forging Integrated One Piece ShankThe bushing chisel shank is overall forged and undergones high temperature heat treatment, making it less prone to breakage.. Aggressive and Durable Carbide TeethThe 16 pcs 4.8mm carbide teeth is larger than standard and is securely joined to the base through hand copper brazing, making the bushing bit more aggressive and durable.. Only Virgin Materials UsedManufactured only with virgin non-recycled materials.

Professional Bushing Installation Solution Specifically engineered for the Hendrickson Vantraax Narrow Tri-Functional Bushing system. Allows for removal and installation while the suspension remains on the trailer, streamlining the service procedure into a manageable, one-person operation.. Built from Heat-Treated Alloy Steel Key components are precision-machined from heat-treated alloy steel, providing high tensile strength and resistance to deformation under force. The black oxide finish enhances corrosion resistance for durability in demanding workshop conditions.. Precise OEM Replacement Broad Compatibility A direct replacement for Hendrickson OEM part numbers S-24736 and TRB5914-T. Designed for the Vantraax Narrow Bushing system and also compatible with HTHSHK190-230 series, Intraax AA, and other major trailer air suspension systems.. Engineered for Accuracy and ReliabilityThe machined face ring promotes correct bushing alignment during pressing. Its heavy-duty construction offers stability and rigidity for challenging applications. For best results, use with the corresponding bushing kit.. Supported by a 12-Month AssuranceThis professional-grade tool kit is backed by a 12-month assurance and customer support. We are committed to addressing any concerns regarding product durability or performance..

Fitment Compatible with Hendrickson Vantraax Narrow Bushing Complete Kit. Cross Reference For BWP HE9BL-T, Euclid E-14634, Power Products TRB5914-T, AA00003037.. QualityThe tool offers exceptional strength and stabilityable to withstand repeated bushing removal and installation. The coating adds strong corrosion resistance, preventing rust and extending the tools service life even in harsh workshop environments.. DesignEngineered to remove and install Hendrickson Vantraax tri-functional narrow bushings without removing the trailer suspension. Its precision-machined face ring ensures easy bushing alignment, making the replacement process smooth and efficient for professionals.. InstallationNo complex setup is requiredjust ensure the tools threads are well lubricated before and during use to avoid thread damage a quick step that protects both the tool and your suspension parts. The tools direct replacement design aligns perfectly with target bushings, allowing for hassle-free operation.. After-sales service We are committed to excellence in customer support. Should any issues arise, please contact us. Our team will respond promptly and ensure your complete satisfaction..

Wide CompatibilityDesigned for Rockshox and for Fox rear shock absorber bushing this bushing tool features dual-size heads to meet all your repair needs a versatile suspension shock tool and suspension system tool for full rear shock servicing. Integrated Bearing DesignBuilt-in integrated bearing in this bushing removal tool enables smooth force transfer for easy rear shock maintenance this premium suspension bushing extractor lets you repair and maintain rear shock absorbers effortlessly. Durable MaterialCrafted from stainless steel and shock bushing aluminum this bushings removal tool is rust-free and sturdy for long-term use a durable bushing tool for repeated professional and home repair applications. Precise OperationThis rear trailing arm bushing installation tool fits DU and needle bearing bushings equipped with clear scales and visible window the bushing installation tool ensures precise bushing removal and installation every time. Usage NoteImportant tip for this bushing removal kit apply lubricating grease evenly on bolt threads before using this motorcycle shock absorber oil seal installation tool and energy suspension shock bushing service tool.

EASY REAR SHOCK MAINTENANCE Repair and maintain rear shocks with ease using the Rear Bushing Shock Tool. Designed for installing or removing rear shock eyelet bushings, this tool is a must-have for any DIY mechanic.. VERSATILE DESIGN The Rear Bushing Shock Tool is suitable for both DU and needle bearing bushings. Its observation window and scale ensure precise installation and removal every time.. DURABLE CONSTRUCTION Made with high-strength stainless steel and aluminum alloy, this tool is built to last. It's corrosion-resistant and won't rust, ensuring a long lifespan and optimal performance.. INTEGRAL BEARING The Rear Bushing Shock Tool features a built-in integral bearing that provides even force transmission without damaging your equipment.. SAVE TIME EFFORT Save time and effort with the easy-to-use Rear Bushing Shock Tool. Its durable construction and precision design make it a reliable tool for any repair or maintenance job..

Fitment Compatible with Hendrickson S-24691, for Automann TS TRB5912, for Dayton TS 334-1576, for Euclid TS E-10729A, Flagg TS HT245, Gaff TS 13628.. Replace part Number S21307 S-21307 E-9575 TRB5912-T R309575 SH2034.. Function Addresses issues such as bushing aging, cracking, and looseness. Suitable for repairing the rear axle suspension systems of semi-trailers and heavy-duty trucks equipped with this type of suspension.. InstallationNo complex additional tools are required for setup. Simply lubricate the tools threads before use as recommended to avoid damage, and youre ready to start. Confirm compatibility with your model, ensuring a smooth installation process.. After-sales service We are committed to excellence in customer support. Should any issues arise, please contact us. Our team will respond promptly and ensure your complete satisfaction..

Compatible Vehicles Applicable to many cars and LCV ,HGV Engines. Package 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings M10. M12. M14. M16. Product Usage For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings. Benefit Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool. Important Note When doing automotive maintenance always make sure all the tools are correctly used and wear safety glasses and gloves . Any question or problem, feel free to contact us.

Product Usage Quickly and easily Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings, fits for automobiles and LCVs.. Products include30 x sleeves 5 x pulling spindle M10, M12, M14, M16 5 x Stop plate discs adapter. Outside DiameterInside Diameter3222342436263828403042324434463648385040, 52425444564658486050625264546656685870607262726274647666786880708272857587779080. MaterialForged by Alloy steel, Rugged and durable. Can withstand 3500N. At the same time, it has durability and corrosion resistance.. Excellent Service We are committed to providing the best professional tools and the best service for auto repair. If you have any questions, please don't hesitate to contact us. We provide 24-hour before and after-sales service.. Friendly reminder You can refer to our video for instructions..

Complete standard and metric bushing adapter set with 39 adapters, 4 strong alu handle. Fit standard races used in most wheel bearing applications.. SAE sizesBlack 38x716, 716x12, 12x916, 916x58, 3964x1116, 58x34, 1116x1316, 4764x78, 1316x1516, 5564x1, 1516x1-116, 1x1-18, 1-116x1-316, 1-316x1-516. Metric sizesRed 10-12mm, 12-14mm, 14-16mm, 15-17mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-36mm, 35-40mm, 38-42mm, 39.5mm, 44.5mm, 50mm, 59mm,63mm,65mm, 72mm, 76mm, 81mm. Master bearing race and seal installer kit is suitable for the installation of straight races and seals into brake disc hubs without damage to the bearing or axle housing.. Bushing press kit is made from machined aluminium, which efficiently transfers striking power and is lighter and easier for the technician to use..

Manufacturer Part NumberS-24736. Bushing TypeNarrow Bushing. Part TypeBushing Installation Tool. High Graded Steel Components,Durable Strength,Resists Corrosion,Black Oxide Coating. Direct Replacement for Hendrickson S-24736.For use with the Bushing Kits.

Great Compatibility Fit for GM 700R4 700-R4 4L60 4L60E 4L65E transmissions.. Include 12 Bushing Drivers 61-71 and one Driver Handle. Each part is manufactured to OEM specifications and testing.. Perfect Design Replacement for Atec Trans-Tool KK OTC Kent-Moore SPX T-0220, T-0220-700R4, SKU311. More efficient and easy removal and instalation of bushings on all the above automatic transmissions to save your time and money.. Superior Quality Advanced CNC machined heavy duty solid steel with black anodizing, strong and durable, anti-impact and anti-corrosion. High precision and hardness to provide a much longer service life.. 100 Satisfaction Guarantee If you're not 100 satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional Sincere Service allows you to take no risks to purchase in E-cowlboy.

Bushing Type Wide Beam Bushing. Manufacturer Part Number S21307. Bushing Installation Tool for Hendrickson Replace Part S21307, E9575, TRB5912-T Automann. Funtion For use with Hendrickson Tri-Functional Wide Beam Bushing Kits.This kit will easily remove and install the Hendrickson Intraax Tri-Functional bushing while the suspension remains on the trailer. Made to service most Hendrickson, Hendrickson Turner, Watson Chalin, and Automann bushings. NoteEnsure that threads on tool are well lubricated before and during use to avoid damaging threads.The Large capacity lubricating grease helps you better complete your work.

2025 Update Design Our Rear Shock Bearing Bushing Tool is suitable for both DU and needle bearing bushings. Its observation window and scale ensure precise installation and removal every time.. MaterialThe bicycle rear bushing shock installation and disassembling tool is made of high-strength aluminum alloy and stainless steel material, wear-resistant and anti-corrosion.. Package Includes The parcel contains 2pcs DU bushing, which can be used as replacement parts. Repair and maintain rear shocks with ease using the Rear Bushing Shock Tool. Designed for installing or removing rear shock eyelet bushings, this tool is a must-have for any DIY mechanic.. Save Effort The design of horizontal thrust bearing reduces the resistance during installation and saves time and effort. Save time and effort with the easy-to-use Rear Bushing Shock Tool.. NotePlease check the installation pictures and videos when using it to make the operation easier..

2025 Update Design Our Rear Shock Bearing Bushing Tool is suitable for both DU and needle bearing bushings. Its observation window and scale ensure precise installation and removal every time.. MaterialThe bicycle rear bushing shock installation and disassembling tool is made of high-strength aluminum alloy and stainless steel material, wear-resistant and anti-corrosion.. Package Includes The parcel contains 2pcs DU bushing, which can be used as replacement parts. Repair and maintain rear shocks with ease using the Rear Bushing Shock Tool. Designed for installing or removing rear shock eyelet bushings, this tool is a must-have for any DIY mechanic.. Save Effort The design of horizontal thrust bearing reduces the resistance during installation and saves time and effort. Save time and effort with the easy-to-use Rear Bushing Shock Tool.. NotePlease check the installation pictures and videos when using it to make the operation easier..

Comprehensive Sizes Our bearing press kit handles various sizes of bearing disassembly tasks. It is equipped with 52 pcs of commonly used disc sleeve sizes and multiple assembly accessories for complete tools. Heavy-Duty Sturdiness The driver tool is made of high-hardness steel, with thickened disc sleeves that withstand heavy blows from hammers or chisels. Our bushing driver set features an oxidized black coating for rust wear resistance and durability. Thickened Steel Handle Our bearing seal driver kit features a long and thickened handle that effectively transmits impact force without deformation. The handle has slip-resistant patterns for a secure grip that wont loosen. Damage-Free Operation You can assemble disc sleeves using accessories. Screws securely lock sleeves polished edges avoid damaging bearings and other parts. Our bearing driver set replaces inefficient, forceful methods like hammers or chisels. Easy Storage with Toolbox To solve tool storage issues, our seal driver kit provides a high-toughness, waterproof plastic box with internal size markings. It allows orderly storage and clear identification, ensuring reliable storage and portability.

Bicos Multifunctional Tool for Bushing, Bearing, and Seal Maintenance This adaptable tool from Bicos offers a comprehensive solution for both removing and installing a variety of components, including bushings, bearings, and seals.. Outside Diameter 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82mm.. Inside Diameter 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64, 66, 68, 70, 72mm.. Applicable Models Fits for automobiles and LCVs..

Use for removes and installs rear shock eyelet bushings and mounting hardware, and perfect for the repair and maintenance for rear shocks.. Suitable for Rockshox Fox, two sizes of heads to meet all your needs.. Easy to use, with scale lines and visible windows, you can easily complete disassembly.. Built-in integral bearing to provide even force transmission, will not cause damage to the parts.. Made of high -quality stainless steel and aluminum alloy, long service life..

Fitment Our 6L80, 6L90 2006-On Transmission Bushing Driver Installer Tool Fits For Chevy For GMC For Cadillac For Hummer6 Speed Only. High QualityThis 6l80 transmission tools Made of high quality solid steel, this transmission bushing driver installer tool is solid, durable and has a long service life.. Easy To UseThe 6L80 6L90 trans bushing driver installer tool is easy to use and durable in use.. OEOEM Part Number104bdmk,6L80-Tool. Manufactured with precision to meet OE standards.. Package Includes 7 Bushing Drivers, 2 Driver Handles. Aftermarket product with premium quality, stable performance, high reliability, suitable for replacing your broken one..

Package Dimensions 24.13 cms L x 3.048 cms W x 1.27 cms H. Product Type Auto Accessory. Package Quantity 1. Country Of Origin China.

OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, AirHydraulic pump, and installationremoval adapters. Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool. Completes the job in a fraction of the time that traditional methods take. Saves an average of 45 minutes per bushing 4 per vehicle on flat rate of 1.5 hours per bushing - a huge time savings. No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.

Quickly and efficiently removing and installing the upper control arm bushings can greatly save you time and effort.. For use on rear wheel drive Ford, GM and Chrysler vehicles, for use on autos only - Not designed for trucks. Built to exceed tool standards.. 11-Piece tool set for removing and installing press-in bushings. Allows changing the press-in bushings without removing the control arm.

For the removal and installation of bushesbearing and seal etc... Fully universal applications on both cars and LCV.. 22 Sleeves Material 40 CR.. 5 pulling spindle 45 Carton steel nuts sizes M10, M12, M14, M16, M18..

Master Bushing Tool Set ---- deluxe custom driver kit, assist in the bearing race and seal replacement on your car, truck transmission, axle, wheel hub when installing new bearing seal back into your vehicles. Universal Compatibility ---- our bearing and seal driver set has 50 interchangeable discs, giving you an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other. The discs go from 0.7 inches all the way to 2.55 inches in 1mm increments plus 2.9 inches. All discs are connected with a 0.47 inches shaft and screw which connects to a 7.08 inch handle, making the wheel bearing driver set complete and effect.. Heavy Duty and Durability ---- heavy-duty carbon steel construction black anodic oxidation for ultimate anti-rust performance, these components will stand up to heavy use and accidental drops. Perfect for off road weekend warriors, novices, and professional mechanics.. Effective Press Kit ---- everything you need for a fast effective removal and installation of wheel bearings on your cars or trucks easily replaces wheel bearings with our multi-size bushing discs and heavy-duty long handle shaft. Comes with the case ---- Each kit includes illustrated parts diagram making operation easily. It is equipped with 50pcs bushing discs, 1pc long handle shaft and necessary assemblies. Comes in a heavy duty, blow molded case for every parts, easy for storage and transport..

ReliableThis bushing wrench fits most 1911 style pistols,package includes 2 Pcs Bushing Wrenches. Durable constructionIt is made of solid and non-abrasive materials and can be used for many years. FunctionThe Barrel Bushing Wrench, as an indispensable part of the kit, is absolutely necessary for disassembling tight-fitting bushings. Reliable FitPrecision machined for a close fit to Government Model and Officers bushings,designed to fit most full-size 1911 barrel bushings, this wrench provides a secure solution for your maintenance needs. Easy useComfortable grip for easy to use and not painful on your hands.

2-in-1 Bearing Bushing Kit Orion Motor Tech's 2-in-1 bearing and bushing service Kit provides a comprehensive solution for your maintenance needs, making it easy to handle axles, bearings, bushings, and seals while preventing damage to the components. Comprehensive Tool Kit This all-in-one tool kit includes a 16pc blind bearing puller set with a slide hammer, puller, 10 split collets, other tools, along with a 52pc bushing removal kit including 49 bushing discs, a long handle shaft, and accessories. Wide Compatibility This internal bearing puller set handles parts with diameters ranging from 6 to 59 mm, while the bushing driver tool set accommodates sizes from 18 to 65 mm, plus 74 mm, ensuring compatibility with most cars, ATVs, and light trucks. Engineered for Durability Constructed from heavy-duty steel with corrosion-resistant coatings, our wheel bearing removal tool kit delivers exceptional strength and long-term durability, even under the toughest conditions. Custom Case for Easy Storage The wheel bearing press tool kit includes custom blow-molded cases for neat organization and convenient transport, keeping your tools safe and ready for use.

Professional Bushing Press Kit The trailing arm bushing removal tool for replacement of the rear trailing arm bush moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to, compatible with Honda or Acura cars.. Premium Quality The bushing removal tool is made of high-quality metal, with high hardness and is not easily broken. The surface has a rust resistant powder coating, which has a long service life and is durable and sturdy.. Design Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables. Easy to Operate Just remove wheels and body lateral link bolts watch for any camber shims between the body and the link, loosen the toe link bolts, remove the trailing arm bush bolts, and pull the trailing arm down enough to put on the tool, apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble.. Applications The control arm bushing tool is compatible for Honda or Acura vehicles with trailing arm bushings Compatible for HondaCivic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and compatible for AcuraIntegra 1994-2001, Integra 1990-1993..

1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.. 2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.. 3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 12 and 34 ton 4WD vehicles having the Dana 30 or 44 front axle compatible with Ford, GM, Dodge, IHC and Jeep vehicles.. 4.CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press bushing removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch 27.9cm x 7.6cm x 38.1cm plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.. 5.ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know..

Professional Purpose - Targeted for Rear Shock Eyelet Bushing Work This static press tool is specifically engineered for the installation and removal of rear shock absorber eyelet bushings, making it an essential tool for motorcycle, ATV, or UTV rear shock maintenance. It provides precise, controlled force to safely handle bushings without damaging the shock absorber housing, eyelet, or internal componentseliminating the hassle of manual installationremoval and ensuring professional-grade results every time.. Durable Material - Long-Lasting Crafted from high-strength materials high-strength stainless steel and aluminum alloy, this bushing tool boasts exceptional sturdiness and durability. It features excellent rust-proof performance, able to withstand harsh workshop environments, repeated use, and exposure to oil, grease. The robust construction prevents bending, deformation, or wear, ensuring a long service life and consistent, reliable performance for all your shock maintenance tasks.. 3 Versatile Support Base Adapters - Wide Compatibility The tool comes complete with three color-coded support base adapters, each designed for specific bushing types to meet diverse maintenance needs Purple adapter for bushings with an inner diameter of 12mm Red adapter for bushings with an inner diameter of 12.7mm and Blue adapter specifically for DU bushings. The color-coded design allows for quick identification, while the precise fit of each adapter ensures stable operation and prevents bushing slippage during installation or removal.. Easy to Use Designed with user-friendliness in mind, this static press tool requires no complex assembly or professional skillseven DIY mechanics and beginners can operate it with ease. Its ergonomic design and static pressure principle deliver even, controlled force, avoiding uneven pressure that can damage rear shock absorbers, bushings, or eyelets. Simply select the correct adapter, secure the tool, and apply pressure to smoothly install or remove bushings, saving you time and effort while protecting your valuable equipment.. Essential for Rear Shock Maintenance Repair This bushing installation and removal tool is a must-have accessory for anyone performing rear shock absorber maintenance, repair, or replacement. Its suitable for professional repair shops, motorcycle enthusiasts, DIY mechanics, and ATVUTV owners who want to maintain their vehicles performance. Whether youre replacing worn bushings, servicing shocks, or upgrading your rear suspension, this tool ensures efficient work, helping to extend the lifespan of your rear shocks and improve overall vehicle performance..

Delivers 10 tons of hydraulic force to remove and install truck front spring eye bushing assemblies quickly and easily. Services bushings with diameters from 1-14 inch through 1-78 inch and pin diameters from 78 inch through 1-18 inch. Handles all popular OE and aftermarket components including Horton pin and bushing assemblies. Service bushing assemblies in many cases without removing leaf spring hangers and spring assemblies from the vehicle. All accessories are included except the hydraulic hand pump which must be purchased separately.

EFFICIENT EASY TO USE Utilize the Tiger Tool 15034 Adapter with your existing 15000 Pin Bushing Starter Kit to seamlessly remove and install pins and bushings across a broad spectrum of heavy-duty truck manufacturers. This adapter allows you to perform maintenance while the entire suspension remains on the vehicle, offering unparalleled convenience and efficiency.. WIDE COMPATIBILITY For use with Freightliner 16-19978-000 and 16-20508-000. This adapter ensures you can service a wide range of vehicles without needing to remove the suspension, saving significant time and effort. Note The adapter requires the 15000 Pin and Bushing Starter Kit for operation.. ROBUST CONSTRUCTION Engineered with precision, the 15034 Adapter's components are crafted from high-grade metals, ensuring both strength and durability. This robust construction guarantees the adapter's longevity, providing a reliable solution for the rigorous demands of heavy-duty vehicle maintenance.. CORROSION-RESISTANT FINISH Featuring a protective black oxide coating, the 15034 Adapter is built to withstand corrosive environments, ensuring it remains in top condition through extensive use. This durable finish offers mechanics and technicians the confidence that their tool will last job after job.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

CONTROL ARM BUSHING TOOL The upper control arm bushing press kit easily replaces press-in type upper control arm bushings on many rear-wheel-drive vehicles Upper control arm bushing tool for use with Chrysler, Ford, and GM vehicles. NON-DAMAGING CONTROL ARM TOOL Our upper control arm bushing puller kit quickly removes or installs control arm bushings without damaging control arms Mechanical screw power removes the worn bushing, allowing for safe installation of new bushings. EASY AND CONVENIENT This control arm bushing installer and removal kit makes it simple to replace pressing-type upper control arm bushings without removing the control arm from vehicles Remove or install control bushings in no time. INCLUDES NECESSARY BUSHING TOOLS Our bushing press and pull kit comes with a C frame, screw assembly, and all adapters and inserts that are necessary to do the job properly Just find the correct adapter size and place it over the control bushing. STURDY STORAGE CASE The upper control arm bushing tool kit comes complete in a storage case for safe keeping, making it easy to store and transport the control arm bushing removal and installation set Take this upper control arm kit with you.

Type Pin Bushing Adapter Service Kit. Application Work for Heavy Duty Truck Equipment. OEOEM Part Number 15030. The pin and bushing service kit will easily allow you to remove and install rubber-isolated pins and bushings for trucks and equipment while the suspension remains on the vehicle. The adapter has 20 tons pulling capacity to reduce the risk of damage to nearby components.. Comes with Extension tube, Cylinder adapter, 3.25 Tube cap, Push adapter, Pull adapter, 2x Adapter pins, 2.625 Tube cap..

Item Package Height40.64 Centimeters. Item Package Length1.016 Centimeters. Item Package Width35.56 Centimeters. Item Package Weight0.68 Kilograms.

Includes a 7 Driver for Applications withLimited Access.. Pneumatic bushing driver set removes and installs truck andtrailer 1-38 anchor pin bushings and stuck anchor pins.. Double sided cone snaps onto driver to drive out and installbushings. Use flanged end to install and tapered end toremove. Also removes truck leaf spring bushings.. Fit type Vehicle Specific.

Uses hydraulic pressure to remove brass and bronze bushings. Screw the self-tapping tip 2-3 threads into the brass or bronze bushing. Fits brass or bronze bushings from 12 inch to 34 inch inner diameter. Not for use on steel bearings.

Type Pin Bushing Adapter Service Kit. OEOEM Part Number 15012. Made from high-grade steel for strength and long-lasting performance under demanding conditions. Black oxide coating provides excellent corrosion resistance, keeping the tool in top condition over time. Compatible BushingsFor R303868, TRB6822, TRB6822UB, 098065, 227723, 321265, 321265U, D424, D424S, DT1480, E3868, C889, 13528, 49210, 66649005, 49210000L, 64400005L, 66649005l, 1693063C1, 12L594, 0227723, TRB68220, 15012, TRB6822UB, 23986, RB187, and 13513.

EFFICIENT EASY TO USE Utilize the Tiger Tool 15031 Adapter with your existing 15000 Pin Bushing Starter Kit to seamlessly remove and install pins and bushings across a broad spectrum of heavy-duty truck manufacturers. This adapter allows you to perform maintenance while the entire suspension remains on the vehicle, offering unparalleled convenience and efficiency.. WIDE COMPATIBILITY For use with Automann MR772, MR772UB. For use with Dayton RB-263. For use with Flagg RB263. For use with Freightliner 16-14603-000, 16-17194-000, 16-17770-000, 16-18023-000. For use with Gaff 11094. This adapter ensures you can service a wide range of vehicles without needing to remove the suspension, saving significant time and effort. Note The adapter requires the 15000 Pin and Bushing Starter Kit for operation.. ROBUST CONSTRUCTION Engineered with precision, the 15031 Adapter's components are crafted from high-grade metals, ensuring both strength and durability. This robust construction guarantees the adapter's longevity, providing a reliable solution for the rigorous demands of heavy-duty vehicle maintenance.. CORROSION-RESISTANT FINISH Featuring a protective black oxide coating, the 15031 Adapter is built to withstand corrosive environments, ensuring it remains in top condition through extensive use. This durable finish offers mechanics and technicians the confidence that their tool will last job after job.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with all the receiver tubes and removinginstalling adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle. PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.. CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press bushing removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve.. ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know..

EFFICIENT EASY TO USE Utilize the Tiger Tool 15005 Adapter with your existing 15000 Pin Bushing Starter Kit to seamlessly remove and install pins and bushings across a broad spectrum of heavy-duty truck manufacturers. This adapter allows you to perform maintenance while the entire suspension remains on the vehicle, offering unparalleled convenience and efficiency.. WIDE COMPATIBILITY For use with Dayton TB-80, TB-78, 327-533. For use with Flagg TB78, B1491-96. For use with Kenworth B65-6008, B13-1000, B13-1002, B13-1008. For use with Volvo 20747781, 20523026, 1075724, 1076334, 1075723, 85134672, 695 85134072. This adapter ensures you can service a wide range of vehicles without needing to remove the suspension, saving significant time and effort. Note The adapter requires the 15000 Pin and Bushing Starter Kit for operation.. ROBUST CONSTRUCTION Engineered with precision, the 15005 Adapter's components are crafted from high-grade metals, ensuring both strength and durability. This robust construction guarantees the adapter's longevity, providing a reliable solution for the rigorous demands of heavy-duty vehicle maintenance.. CORROSION-RESISTANT FINISH Featuring a protective black oxide coating, the 15005 Adapter is built to withstand corrosive environments, ensuring it remains in top condition through extensive use. This durable finish offers mechanics and technicians the confidence that their tool will last job after job.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

EFFICIENT EASY TO USE Utilize the Tiger Tool 15030 Adapter with your existing 15000 Pin Bushing Starter Kit to seamlessly remove and install pins and bushings across a broad spectrum of heavy-duty truck manufacturers. This adapter allows you to perform maintenance while the entire suspension remains on the vehicle, offering unparalleled convenience and efficiency.. WIDE COMPATIBILITY For use with Automann MR656UB, MR656, MR782, MR714E, MR714. For use with BATCO 44090. For use with Dayton RB-268, RB-205U, RB-268, RB-205, RB-234. For use with Dyco D046, D46, DT1155. For use with Euclid E-8804. For use with Flagg RB268, RB205UB, RB235, RB268, RB205, RB234, RB260. For use with Freightliner 1613962000, 1616412000, 1618035000, 6813250150, 6813250250. For use with Gaff 11083. For use with Hendrickson 51209, 52296. For use with International 3538115C1. For use with Meritor MR782. For use with Peterbilt 52296. For use with World America WA12-5136.. ROBUST CONSTRUCTION Engineered with precision, the 15030 Adapter's components are crafted from high-grade metals, ensuring both strength and durability. This robust construction guarantees the adapter's longevity, providing a reliable solution for the rigorous demands of heavy-duty vehicle maintenance.. CORROSION-RESISTANT FINISH Featuring a protective black oxide coating, the 15030 Adapter is built to withstand corrosive environments, ensuring it remains in top condition through extensive use. This durable finish offers mechanics and technicians the confidence that their tool will last job after job.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

EFFICIENT EASY TO USE Utilize the Tiger Tool 15040 Adapter with your existing 15000 Pin Bushing Starter Kit to seamlessly remove and install pins and bushings across a broad spectrum of heavy-duty truck manufacturers. This adapter allows you to perform maintenance while the entire suspension remains on the vehicle, offering unparalleled convenience and efficiency.. WIDE COMPATIBILITY For use with Automann TRB5912. For use with Dayton 334-1576. For use with Euclid E-10729A. For use with Flagg HT245.For use with Gaff 13628. For use with Hendrickson Intraax Tri-Functional S-24691. This adapter ensures you can service a wide range of vehicles without needing to remove the suspension, saving significant time and effort. Note The adapter requires the 15000 Pin and Bushing Starter Kit for operation, or alternately be used with the Tiger Tool 20 Ton Hydraulic Cylinder part number 17202.. ROBUST CONSTRUCTION Engineered with precision, the 15040 Adapter's components are crafted from high-grade metals, ensuring both strength and durability. This robust construction guarantees the adapter's longevity, providing a reliable solution for the rigorous demands of heavy-duty vehicle maintenance.. CORROSION-RESISTANT FINISH Featuring a protective black oxide coating, the 15040 Adapter is built to withstand corrosive environments, ensuring it remains in top condition through extensive use. This durable finish offers mechanics and technicians the confidence that their tool will last job after job.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

BEARING PRESS KIT This 10 piece bearing press kit by Orion Motor Tech allows you to quickly and easily install bearing races and seals without damaging the axle housing. VERSATILE MECHANIC TOOLS Our bearing race and seal driver set includes 9 dual-sided bearing adapters that cover most needful sizes to fit most standard races and seals for various vehicles. BUILT TO LAST Made of heavy-duty aluminum alloy with corrosion resistant coating, this seal installer set ensures exceptional strength and unrivaled endurance to withstand even punishing use. SIMPLE TO USE The knurled driver handle offers a nonslip grip for precise control, while the clearly marked laser engravings on each driver collar allows you to identify and select the right size quickly. COMPACT PORTABLE This bearing and seal driver set comes with a handy storage case to keep everything in place, making it easy to take with you on the go.

BEARING PRESS KIT This 10 piece bearing press kit by Orion Motor Tech allows you to quickly and easily install bearing races and seals without damaging the axle housing. VERSATILE MECHANIC TOOLS Our bearing race and seal driver set includes 9 dual-sided bearing adapters that cover most needful sizes to fit most standard races and seals for various vehicles. BUILT TO LAST Made of heavy-duty aluminum alloy with corrosion resistant coating, this seal installer set ensures exceptional strength and unrivaled endurance to withstand even punishing use. SIMPLE TO USE The knurled driver handle offers a nonslip grip for precise control, while the clearly marked laser engravings on each driver collar allows you to identify and select the right size quickly. COMPACT PORTABLE This bearing and seal driver set comes with a handy storage case to keep everything in place, making it easy to take with you on the go.

For the removal and installation of bushes bearings and seals etc.. Fully universal applications on both cars and LCV.. Inside Diameter 34,36,38,40,42,44,46,48,50,52,54,56,58,60,62,64,66,68, 70,72mm. Outside Diameter 44,46,48,50,52,54,56,58,60,62,64,66, 68,70,72,74,76,78,80,82mm.

UNIVERSAL SIZING This Orion Motor Tech bushing removal tool kit includes 50 interchangeable discs to build 2,450 custom bushing driver variations so you always have the right size for the job.. COMPLETE SET The discs sizes range from 18mm 0.7 inches all the way to 65mm 2.51 inches in 1mm increments plus 74mm 2.91 inches. All discs are connected with a 12mm 0.47 inches shaft and screw which quickly connects to a 180mm 7.08 inch handle, making for a complete and effective wheel bearing driver set.. EASY OPERATION This auto tool kit includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.. HEAVY-DUTY DURABILITY With ultra-strong carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.. PROTECTIVE CARRYING CASE Includes a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Removes and installs bushings on most domestic cars and light trucks. Durable storage case with step-by-step instructions. Precision-built to meet or exceed ANSI standards. Strong and dependable enough to last a lifetime. Kit includes usage instruction with photos. Removes and installs small and medium press-in bushings. For use on cars, trucks, tractors, construction equipment, and more.

15030-Leaf Spring Bushing Tool KitBuilt for major brands like Meritor, Freightliner, Hendrickson, International, and Peterbilt. The pro's choice for shops, fleets, and serious DIYers.. COMPLETE SOLUTION PAIR WITH STARTER KITThis master set works with the 15000 Starter Kit sold separately to handle the entire job efficiently with all needed adapters and pins.. 20-TON PROFESSIONAL POWER SAVE TIME MONEYFight rusted bushings in minutes, not hours. 20-ton force makes stubborn jobs easy, reduces labor dramatically, and pays for itself fast.. PREVENT COSTLY DAMAGE WORK SAFELY PRECISELYApply controlled pressure right where needed. Remove bushings safely without damaging expensive suspension parts or risking accidents.. BUILT TO LAST HEAVY-DUTY CONSTRUCTIONMade from high-strength, anti-rust steel. Features locking rings and threaded pins for secure operation under intense pressure. A lasting investment.. WARRANTY SUPPORTFull 1-year warranty included.Get 247 expert customer service.Resolve issues fast with guaranteed support..

Ultra Durable Bearing Race Installer Our bearing race and seal driver set is constructed from high quality high-toughness aluminum for long durability and good protection to axle housing, wont mark the bearings during use. Anodized finish for anti-rust and anti-corrosion, extend tools service life even further. Bearing Install Tool Specification Bearing installation tool comes with 9 driver discs to fit most standard wheel bearings Driver discs with set are 1.565 inch, 1.750 inch, 1.965 inch, 2.325 inch, 2.470 inch, 2.555 inch, 2.830 inch, 2.995 inch, and 3.180 inch. Easy to Use The bearing press kit is special designed for installing and replacing wheel bearing race and seals,inserting wheel bearing races and seals with out damage to the race. To use, simply select the correct bushing, align straight and centered, and then pound inout. Versatile Applications The bearing race seal driver set is used for automotive wheel bearings. Discs of 9 different sizes are suitable for most wheel bearing applications such as domestic and imported cars, trucks and SUV. All-In-One Kit The 9-disc and 1-driver set are stored in a heavy duty blow molded plastic carrying case for safe transport, dry storage, and simple organization.

ApplicationThis rear suspension bushing removal tool has a wide range of application and strong practicality. It is suitable for Focus MK1 MKII 1998-2007, Cuga 2008, C-Max 2007, 3 sedan, hatchback 2003-2008, suitable for 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012.. Easy to useDesigned for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time.. Material Made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life. Function Designed for removal and installation of rear trailing arm bushing tool, and can be used in situ without removing the arm from the vehicle. After-sales GuaranteeIf there is any dissatisfaction with the product, you can contact us to deal with it..

Master Bushing Tool Set ---- deluxe custom driver kit, assist in the bearing race and seal replacement on your car, truck transmission, axle, wheel hub when installing new bearing seal back into your vehicles. Universal Compatibility ---- our bearing and seal driver set has 50 interchangeable discs, giving you an amazing 2,450 different variations due to each of the 50 discs being interchangeable with each other. The discs go from 0.7 inches all the way to 2.55 inches in 1mm increments plus 2.9 inches. All discs are connected with a 0.47 inches shaft and screw which connects to a 7.08 inch handle, making the wheel bearing driver set complete and effect.. Heavy Duty and Durability ---- heavy-duty carbon steel construction black anodic oxidation for ultimate anti-rust performance, these components will stand up to heavy use and accidental drops. Perfect for off road weekend warriors, novices, and professional mechanics.. Effective Press Kit ---- everything you need for a fast effective removal and installation of wheel bearings on your cars or trucks easily replaces wheel bearings with our multi-size bushing discs and heavy-duty long handle shaft. Comes with the case ---- Each kit includes illustrated parts diagram making operation easily. It is equipped with 50pcs bushing discs, 1pc long handle shaft and necessary assemblies. Comes in a heavy duty, blow molded case for every parts, easy for storage and transport..

This Ball Joint Press U Joint Removal Tool compatible for most 2WD and 4WD cars and light trucks. This tool set is made of ultra carbon steelthese components will stand up to heavy use and accidental drops. The ball joint press kit is an indispensable tool for your garage Excellent for removal and installation of press-fit parts such as ball joints. Universal joints and truck brake anchor pins. This versatile ball joint removal tool kit can also remove rusted and corroded parts and easily tighten rusted parts. Set contains C-frame press, 3 receiver tubes sizes 2-34x3, 2-14x 2-12 1-34x2, installation and removing adapters..

Kit Include This bearing race and seal driver set has complete standard and metric bushing adapter set with 39 adapters, 4 strong handles, a black case and a pair of gloves Fit standard races used in most wheel bearing applications. SAE sizes Black 38x716, 716x12, 12x916, 916x58, 3964x1116, 58x34, 1116x1316, 4764x78, 1316x1516, 5564x1, 1516x1-116, 1x1-18, 1-116x1-316, 1-316x1-516. Metric sizes Red 10-12mm, 12-14mm, 14-16mm, 15-17mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-36mm, 35-40mm, 38-42mm, 39.5mm, 44.5mm, 50mm, 59mm,63mm,65mm, 72mm, 76mm, 81mm. Premium Material This 43 piece seal driver set is made of solid aluminum It transfers striking power and helps users apply even force when pressing bearings into place, reducing damaging of delicate components. Universal Fit This bearing press for installation of straight races and seals into brake disc hubs Fit for standard races used in most wheel bearing applications.

Features This new lower control arm prying tool is designed for prying down the lower control arm to separate the lower ball joint Aids in getting ball-joints free from knuckles, adjustable position pulling arm allows you to position the tool where needed. Premium Material The suspension specialty bushing tool is made of high-quality steel, sturdy, strong and stable, rustproof, not easy to deform. Universal Fit The lower ball joint pry is applicable for most front-wheel drive vehicles, import cars, domestic vehicles, and minivans. Easy to Use Easy to use and will not damage other parts of the car in the process of repair It adopts upper and lower two-point force-bearing Compared with the old Lower Control Arm Prying Tool, it is not easy to slip off the lower arm. Service Assurance If you are unhappy for any reason or there is some problem with our products, you can get help from us Customer satisfaction is our top priority.

Product Usage Quickly and easily Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings, fits for automobiles and LCVs. Products include28 x sleeves 6 x pulling spindle M102, M122, M14, M16 5x Stop plate discs adapter. Outside DiameterInside Diameter3222342436263828403042324434463648385040, 524254445646584860506252645466566858706072627464766678688070827287777262. MaterialForged by Alloy steel, Rugged and durable. Can withstand 3500N. At the same time, it has durability and corrosion resistance. Precautions Do not use Impact Wrench, keep the Press Sleeves, base, Pulling Spindles, and Bushes Bearings, Seals on the same horizontal line to avoid uneven stress that could cause the Pulling Spindles to break. Because the base is designed to accommodate a wide range of sizes, it is relatively large. If space is limited, you can loosen or remove the swing arm and pull it down to create enough space for operation. Excellent Service If you have any pre-sales or after-sales questions, please contact us. We provide 24-hour professional service. We will wholeheartedly assist you and fully protect your consumer rights to ensure your satisfaction.

Versatile Bushing Press Kit Includes 20 cups and adapters, providing hundreds of combinations for precise bushing, seal, and bearing replacement tasks, ideal for suspension and wheel bearing maintenance. Works seamlessly as a control arm bushing tool.. Comprehensive Bearing Service This bearing press kit is designed for fast and safe removal and installation of bearings, seals, and bushings, reducing the risk of damage to components. Perfect for use as a bearing race and seal driver set.. Heavy Duty Construction Built with a 5 mm thick sleeve wall and ACME-threaded forcing rods, this bearing driver set ensures durability and stability for both light and heavy-duty jobs, making it an essential bearing press tool.. Adaptable Workshop Press Use The kit's plates and sleeves can be used with a standard shop press, expanding its versatility beyond on-site repairs. An ideal axle seal installation tool and hydraulic press accessory kit.. Precision for Professional Results Designed to handle a wide range of tasks, from control arm bushing removal to seal installation, this bushing press and pull kit is essential for mechanics aiming for precise, damage-free repairs..

2-in-1 Bushing Bearing Kit Orion Motor Tech's 2-in-1 bushing and bearing service kit offers a comprehensive solution for your maintenance tasks, making it easy to handle bushings and seals, and to remove bearings, gears, pulleys, and steering wheels. Comprehensive Tool Kit This all-in-one tool kit includes a 14pc bearing puller set with two pair of jaws, 8 extension screws, and additional tools, along with a 52pc bushing removal kit including 49 bushing discs, a long handle shaft, and more. Wide Compatibility Effortlessly remove large or small bearings on most vehicles with the bearing separator, while the bushing driver tool set covers sizes from 18 to 65 mm, plus 74 mm, ensuring compatibility with most cars, ATVs, and light trucks. Engineered for Durability Constructed from heavy-duty steel with corrosion-resistant coatings, our wheel bearing removal tool kit delivers exceptional strength and long-term durability, even under the toughest conditions. Custom Case for Easy Storage This bushing removal tool kit includes custom blow-molded cases for neat organization and convenient transport, keeping your tools safe and ready for use.

ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles without removing the control arm from the vehicle.. PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.. UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive 2WD and 4-wheel drive 4WD cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive 4WD adapter that allows service for 1967 thru current 12 and 34 ton 4WD vehicles having the Dana 30 or 44 front axle found on Ford, GM, Dodge, IHC and Jeep vehicles.. CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press bushing removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch 27.9cm x 7.6cm x 38.1cm plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.. ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know..

1.16-PIECE SET This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 14 to 2-13 inch diameter 6-59 mm. 2.HEAVY-DUTY CONSTRUCTION These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble. 3.WIDE APPLICATION This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts. 4.EASY TO USE For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part. 5.BLOW-MOLDED CASE The custom blow-molded case keeps everything organized and easy to carry or store as needed.

Versatile Bushing Removal Tool This 27 pc. pull and press sleeve kit by Orion Motor Tech provides everything you need to quickly and easily remove or install wheel bearings, bushings, and seals on most cars with an LCV or HGV engine. Covers Most Common Sizes Our complete bushing press kit comes with 22 sleeves sized from 34 to 80 mm for broad application. It also includes 5 pulling spindles in sizes M10, M12, M14, M16, and M18, compatible with a wide range of wrenches and drivers. Notched Sleeve Design Each sleeve is designed with a notch to securely catch the edge of the bushing while allowing clear visibility of the position of the bushing you're working on. Durable Construction Made of premium AISI 1045 steel, this press sleeve kit provides strong and dependable long-lasting service. The pulling spindles are heat treated and blackened for superior strength and corrosion resistance. Compact Portable Our bush bearing insertion tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop.

WHEEL BEARING PULLER SET This wheel bearing tool kit by Orion Motor Tech provides everything you need to let you quickly and easily remove and install your wheel bearings without hammering and front-end alignment. UNIVERSAL COMPATIBILITY Our versatile wheel bearing press kit offers multiple sleeves and bushings in most common sizes to work with nearly any front wheel drive automobile or light truck, whether foreign or domestic. QUICK EASY OPERATION Two 8.8 grade sliding screws with precision threading firmly hold your bearings and let you smoothly pop them out without damage, leaving the steering knuckle and strut assembly untouched. DURABLE CONSTRUCTION Made of premium stainless steel, this wheel bearing removal tool set provides strong and dependable long-lasting service the sliding screws are heat treated and blackened for superior strength and corrosion resistance. COMPACT PORTABLE This 24 piece front wheel bearing press tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop.

Versatile Use This pneumatic bushing driver set is designed for versatile applications in automotive bushing removal and installation tasks, specifically suited for 1-38 anchor pin bushings and stuck anchor pins on trucks and trailers. It allows direct driving without the need to dismantle the wheel assembly, ensuring efficient and straightforward operations.. Durable Construction Crafted from high-quality reinforced materials, the 11-12 long driver provides exceptional durability and wear resistance. Its double-sided cone design facilitates both installation and removal of bushings, with a flanged end for installation and a tapered end for removal. It also excels in removing truck leaf spring bushings, promising a long service life and reliable performance.. Product Contents The package includes a comprehensive set featuring the 29090 pneumatic bushing driver, tailored for ease of use and practicality in maintenance tasks. It meets OE standards, compatible with OE numbers 29090 ensuring compatibility and reliability in use.. Efficient Design With dimensions suitable for accessing tight spaces, this set enhances efficiency in truck and trailer maintenance. Its streamlined design simplifies operations, making it a time-saving tool for professionals and enthusiasts alike.. Warranty Assurance Backed by a lifetime warranty, this anchor pin bushing driver kit offers peace of mind. Customers can rely on its durability and performance, supported by a commitment to quality and customer satisfaction..

EFFICIENT EASY TO USE Utilize the Tiger Tool 15038 Adapter with your existing 15000 Pin Bushing Starter Kit to seamlessly remove and install pins and bushings across a broad spectrum of heavy-duty truck manufacturers. This adapter allows you to perform maintenance while the entire suspension remains on the vehicle, offering unparalleled convenience and efficiency.. COMPATIBILITY For use with Freightliner 1622210000, 16-22210-000 plastic bushing.. ROBUST CONSTRUCTION Engineered with precision, the 15038 Adapter's components are crafted from high-grade metals, ensuring both strength and durability. This robust construction guarantees the adapter's longevity, providing a reliable solution for the rigorous demands of heavy-duty vehicle maintenance.. CORROSION-RESISTANT FINISH Featuring a protective black oxide coating, the 15038 Adapter is built to withstand corrosive environments, ensuring it remains in top condition through extensive use. This durable finish offers mechanics and technicians the confidence that their tool will last job after job.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

VERSATILE SERVICE CAPABILITY The Tiger Tool 15000 Starter Kit revolutionizes pin and bushing service by allowing the use of various Pin Bushing Adapters for servicing rubber-isolated and threaded pins and bushings directly on the vehicle. Note Adapters required for operation are sold separately, ensuring you have the flexibility to choose the ones needed for specific tasks.. WIDE COMPATIBILITY Commonly found on class 6-8 transportation trucks and equipment. For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc... EFFICIENT POWERFUL With the Tiger Tool 15000, the cumbersome process of handling or removing heavy suspension assemblies is no longer necessary. This kit enables direct service on the vehicle, eliminating the need to remove spring packs from the axle, and offers 20 tons of pulling power for efficient pin removal and installation.. TIME LABOR SAVINGS The combination of the 15000 Pin Bushing Starter Kit with one or more adapters streamlines the maintenance process, eliminating the need to disassemble the suspension or use a shop press. This system can reduce shop time by up to 70, offering a comprehensive solution with over 20 different adapter kits available, making it the most extensive service solution on the market.. UNMATCHED STRENGTH DURBILITY Capable of generating 20 tons of pulling strength, the 15000 system effortlessly tackles even the most seized and rusted pins and bushings. U.S. Patent No. 8627557.. NORTH AMERICAN CRAFTMANSHIP INNOVATION Proudly made in North America. Trust in a product that delivers exceptional performance and reliability, backed by a commitment to quality and customer satisfaction..

Comprehensive Sizes Our bearing press kit handles various sizes of bearing disassembly tasks. It is equipped with 52 14 pcs of commonly used disc sleeve sizes and multiple assembly accessories for complete tools. Heavy-Duty Sturdiness The driver tool is made of high-hardness steel, with thickened disc sleeves that withstand heavy blows from hammers or chisels. Our bushing driver set features an oxidized black coating for rust wear resistance and durability. Thickened Steel Handle Our bearing seal driver kit features a long and thickened handle that effectively transmits impact force without deformation. The handle has slip-resistant patterns for a secure grip that wont loosen. Damage-Free Operation You can assemble disc sleeves using accessories. Screws securely lock sleeves polished edges avoid damaging bearings and other parts. Our bearing driver set replaces inefficient, forceful methods like hammers or chisels. Easy Storage with Toolbox To solve tool storage issues, our seal driver kit provides a high-toughness, waterproof plastic box with internal size markings. It allows orderly storage and clear identification, ensuring reliable storage and portability.

High Compatibility Tool Kit Are you ready to get your car out of the garage Our 10-piece ball joint tool kit is designed to fit most 2-wheel drive 2WD and 4-wheel drive 4WD vehicles, including 12 and 34 ton 4WD vehicles with Dana 30 or 44 front axles. It is compatible with popular car brands such as Ford, General Motors, Dodge, IHC, and Jeep.. Make it Harder Our ball joint install kit is built to handle tough tasks without bending or breaking. The C-clamp hardness is HRC32-38, and the jack screw hardness is HRC28-36, achieved through multiprocess heat treatment. This makes our kit reliable and capable of handling the most challenging and high-stress tasks.. Robust Powerful Structure Our heavy-duty ballpoint press kit is made from high-quality carbon steel, providing the strength and durability needed to handle any task. It is coated in black, offering superior protection against water, corrosion, and rust. This ensures that the kit remains efficient and durable even in the harshest conditions.. Protection for All Your Tools The ball joint press makes it easy to remove and install ball joints, U-joints, and brake anchor pins without dismantling the control arm. Our portable carrying case kit includes 10 high-quality pieces, and it is designed for easy transportation and storage.. Whats in the Package Our 10-piece ball joint kit includes 3 receiving tubes, 1 removal adapter, 1 installation adapter, 1 screw, 1 installation cup adapter, 1 press bar, 1 receiving cup, and 1 installation cup. With these tools at your disposal, you'll have a professional car repair assistant that can help you get the job done right..

Custom assembly This custom bushing, bearing and sealed drive kit allows you to build your own custom bushing drive. Choose the required size and assemble your drive tool.. High quality All these custom bushings, bearings and sealed driver kits are made of high-standard aluminum with excellent service life and durability.. Easy to use simple to use, you only need to select the required size, then assemble your custom driver, select the component or size, assemble the drive tool, and beat the tool to complete the work. All discs are fully interchangeable with sealed drive kits.. Great Compatibility This set Can remove or install bushings that are flush with the housing, ideal for removing seal, bush or bearing job. All 50 pieces are interchangeable with each other so you get many different size variations in one set so you will do the job quickly.. After-sales Service If the product has any quality problems, We provide free returnexchange service. you could contact our customer service, we will give you an exact answer within 24h..

While using your existing Tiger Tool 15000 Pin Bushing Starter Kit the 15060 Adapter provides fast and effective removal of even the most seized pivot pins, found on a variety of equipment.. This Tiger Tool 15060 adapter is for use with the following Jost applications JSK790111-03, JSK37U, JSK37UA, JSK37US, JSK37UW, SK75014-03, SK75014-01. This tool easily removes pivot pins on loaders, excavators, tractors and a variety of farm equipment. Please note that this adapter will not work without the 15000 Pin and Bushing Starter Kit, or alternately be used with Tiger Tool's 20 Ton Hydraulic Cylinder part number 17202.. The kit includes two sizes 12 inch and 58 inch of weld-on adapters, each featuring a centering nub on the mating side to ensure correct alignment during the welding process. Replacement packs of weld-on adapters are available separately in either size Tiger Tool part numbers 10706 and 10707.. The 15060 has 20 tons of pulling power and eliminates the risk of damage to nearby components. The machined components manufactured from high-grade metals for strength and durability, and this tool has a black oxide finished coating that resists corrosion.. The Tiger Tool 15060 Pin and Bushing Adapter to be used with the 15000 Kit is proudly made in North America to ensure you have what it takes to get the job done right..