MATERIALRacewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of premium brass to prevent rust and plated for corrosion resistance. UPGRADE TO 20 FITTINGS ? 2 x 316 716-24 Inverted Tube Nut 10 x 316 38-24 Inverted Tube Nut 2 x 316 12-20 Inverted Tube Nut 2 x 316916-18 Inverted Tube Nut 4 x 316 38-24 threads unions. RUST AND CORROSION PROOFINGOur 316 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions. MAKE DOUBLE SINGLE FLARES Designed to use when flaring single or double flare in a variety of material copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 12, 38, 516, 14, 316 O.D. tubing.. BRAKE LINE BENDER Use with tubing with 18, 316, and 14 in. outer diameter.

MATERIALRacewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of premium brass to prevent rust and plated for corrosion resistance. UPGRADE TO 40 FITTINGS This 25 ft brake line kit comes complete with everything you need to replace or install a new brake line system on your vehicle.. RUST AND CORROSION PROOFINGOur 316 14 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions. MAKE DOUBLE SINGLE FLARES Designed to use when flaring single or double flare in a variety of material copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 12, 38, 516, 14, 316 O.D. tubing.. WIDELY APPLICATIONBrake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses.. Comprehensive kit saves time and money compared to buying individual parts. Suitable for both professional mechanics and DIY enthusiasts alike.

Nickel-copper alloy is very flexible making for super easy bending flaring for installation - You can hand bend our brake lines with no bending tools needed. Corrosion and Rust Resistant Copper-nickel alloy resists rust, road salt, and moisture far better than standard steel brake line tubing. These lines are well-suited for vehicles in high-humidity environments, coastal regions, or areas where roads are regularly salted in winter.. SAE and ISO Certified This tubing is tested and verified to meet Society of Automotive Engineers SAE and International Organization for Standardization ISO specifications, ensuring reliable performance and compliance with industry standards.. Complete Kit with 16 Inverted Flare Fittings Includes 25 ft of 316 copper-nickel tubing coil and 16 inverted flare fittings in the most commonly needed sizes 2x 316 716-24, 10x 316 38-24, 2x 316 12-20, and 2x 316 916-18 tube nuts everything needed for a complete brake line replacement.. Ideal Replacement for Steel Brake Lines Copper-nickel brake line tubing is a direct replacement for steel tubing on cars, trucks, and SUVs. The 25-foot coil provides sufficient length for most full-line replacement runs and is compatible with standard inverted flare brake fittings..

Widely Application 316 Brake line kit fits for most hydraulic braking systems, fuel systems and transmission systems,etc. It is also widely used for industrial, household, and commercial purposessuch as HVAC,automotive maintenance,pipelines,home improvement works,etc.. Soft and Flexible 25ft 316 Copper Coated Brake Line is very easy to bend and open, Easy to Bend and Flare without the need for bending tools.And also,the brake line comes with 16 x Brake Line Fittings and 4 x Threads Unions. Your Satisfaction, Guaranteed We stand behind our Brake Line Kit. If any problem arises, including rust, missing parts, or any quality defect, please reach out to us directly through Amazon email. We are committed to resolving your concern promptly with a full replacement or refund, no questions asked. Easy to Use Flaring tool kit comes with everything you need for cutting and flaring metal tubing1x Flaring Bar,1x Tubing Cutter,1x Flaring Cone,5x Adapters,you can easily make single or double flares metal tubing.Not only for brake lines,but also for copper,alminum,brass,magnesium,and other soft steel lines. Adapt to Different Size Pipes Flared tool kit is suitable for single or double flared metal tubing of 316 ,14,516 ,38,12the tubing cutter has a 18 to 58 capacity with innerouter reamers.

WIDE APPLICATION - Suitable for brake lines, hydraulic lines, some plumbing pipes, and various metal pipes such as stainless steel, steel, and some soft metals like copper. Easily create a precision 45-degree single flare, double flare, or bubble in your tubing.. PREMIUM MATERIAL - Our flaring tool is made of high-quality steel that has undergone heat treatment and oxidation, ensuring extreme hardness, damage resistance, and durable reliability for long-lasting use.. VISE-MOUNT DESIGN - For safe operation, this brake line flaring tool must be clamped in a bench vise vise not included. The T-handle clamp secures the die and tube hold firmly, allowing you to make precise flares effortlessly. Then, achieve a flawless flare with just one smooth lever press.. PACKAGE INCLUDES - 45 Degree Brake Line Flaring Tool Body Vise Mounted 4 Types of Split Dies 3164.75mm, 146.35mm, 5168mm and 389.5mm Long Lever Handle Tubing Cutter Instruction Manual Plastic Storage Suitcase.. TIPS FOR USE - Wear gloves and goggles to prevent debris from cuts from sharp metal edges and popping up when turning the handle. Before doing a flare, deburr tubing inside and outside to remove metal shavings and impurities from the inside and outside the tubing. Apply a small amount of anti-seize to tube ends and add a little oil to lubricate flaring cones OP.1 and OP.2 for smooth operation..

VALUE PACK This kit include 1 x flaring tool kit 2 x 316 brake line 60 x 316 38-24 Inverted Tube Nut 16 x 316 716-24 Inverted Tube Nut 8 x 316 12-20 Inverted Tube Nut 8x 316916-18 Inverted Tube Nut8 x 316 38-24 Inverted Tube Union. These fittings are all neatly placed in the box for easy access. SINGLEDOUBLE FLARING TOOL Our brake line flaring tool kit handles single and double flaring in materials such as brass, copper, aluminum, magnesium, and mild steel brake tubes, making them great for brake, fuel, and transmission lines, ensuring a secure and leak-free connection. The brake line flaring tool is suitable for 316, 14, 516, 38, and 12 metal tubing. Flaring tool kit comes with everything you need for cutting and flaring metal tubing1x Flaring Bar,1x Tubing Cutter,1x Flaring Cone,5x Adapters,1x Tube Bender. PREMIUM MATERIAL Our brake line is made of high-quality copper plated with a unique surface treatment, providing superior corrosion resistance and flexibility compared to standard steel lines for long-term use. MULTIPLE SIZES The unions and nuts have 4 sizes 38-24 threads,716-24 threads, 12-20 threads, 916-18 threads regular 316 inch tube fitting size. Match more application scenarios and meet your needs. EASY TO INSTALL Any 2 brake lines can be easily connected to the brake line adapter fittings. First, clean the surface of the brake pipe. Then, put nuts on each end of the two brake lines, and finally connect the two nuts with the brake line union connector, and tighten it with a wrench to secure it. reaming tool with flat indenter, reinforced double-layer flap reaming, stronger flare. WIDELY USED Brake line repair kits are widely used in industrial, domestic, and commercial applications such as automotive repair, plumbing, HVAC, home improvement projects, etc., compatible with most vehicles, including cars, trucks, and SUVs, and suitable for most fuel systems, hydraulic brake systems,s and transmission systems, etc.

Premium Copper Coated Brake LineOur 316 Brake Line Kit features high-quality copper-coated steel tubing thats both flexible and corrosion-resistant. Ideal for vehicles facing harsh weather conditions, this kit ensures reliable performance and durability.. Upgraded with 20 Durable Brass FittingsThis Brake Line kit comes with 20 durable brass fittings, including 4 unions, providing a complete solution for your brake line needs. All fittings are rust-resistant and designed for long-lasting use in automotive brake systems.. Double Single Flaring Tool IncludedThe included flaring tool is compatible with copper, aluminum, brass, magnesium, and soft steel brake lines. Easily create single and double flares for a secure and leak-proof fit. What's in the box 25 ft Racewill copper coated steel brake lines 16 pcs Inverted Tube Nuts fit for 316 Inch Tube 4 pcs threads unions fit for 316 Inch Tube Brake line flaring tool Tube cutter . Wide Application for Multiple Systems316 Brake Line KitSuitable for a wide range of hydraulic braking systems, fuel systems, and transmission systems, this brake line kit offers versatility for both automotive and industrial applications, as well as household and commercial uses. Rust and Corrosion Resistant for Long-Term Use Brake Line Kit,Designed for longevity, the copper-coated steel and brass components are resistant to rust and corrosion, making this kit ideal for extended use in challenging environments..

Flaring Tool Libraton HVAC flaring tool kit comes with 2 flaring clamps for pipes with O.D. 14, 516, 38, 12, 58, 34SAE, and pipes with O.D. 6mm, 8mm, 10mm 12mm, 16mm, 19mmMetric. The 45 eccentric cone design makes it easier to produce a smooth quality flare without leakage Only for single flare.. Clutch Design There is a clutch in the rotating handle, which will automatically disconnect when the flaring operation is completed.. Wide Application The tube flaring tool is applicable to soft metal tubes such as copper tubes, brass tubes, and aluminum tubes. Widely used in HVAC, air conditioners, air heaters, refrigerators, etc.. 5-in-1 Kit This set includes a flaring tool, a metric flaring clamp, an SAE flaring clamp, a pipe cutter for tubes with O.D. 532 to 1-14, and a deburring tool. It includes all the basic flaring tools.. Good After-sale Service Please feel free to let us know if you have any problem with the flaring tool kit. We promise to offer you 100 satisfaction after sales. Our service team will be always here for you to reply to your message within 24h..

Complete Brake Line Kit Orion Motor Tech's 316 flaring tool kit has everything you need to create single double 45 flares for secure connections, including a flaring bar, yoke, tube cutter, 25' brake line, 5 adapters, a brake line fitting set. Versatile Flaring Tool This flaring tool works with copper, aluminum, brass, magnesium, and soft steel tubing in sizes ranging from 316, 14, 516, 38, and 12, providing precise flaring for hydraulic braking, fuel lines, and transmission systems. 25' x 316 Flexible Brake Line Our 316 brake line fits most braking systems and is highly flexible for easy bending and flaring. With a tough 0.028-inch wall thickness and corrosion-resistant zinc plating, it's built to last and perform. Comprehensive Fitting Set This brake line kit comes with a full set of fittings for easy installation 2 each of 316 916-18, 12-20, and 716-24 inverted tube nuts, 10 of 316 38-24 inverted tube nuts, and 4 of 316 38-24 threaded unions. Engineered for Durability Made from tough steel and treated with corrosion-resistant finishes, this flaring tool ensures long-lasting strength and performance for HVAC, automotive repairs, pipelines, and home improvement projects.

Premium copper-plated brake lineOur 25 ft 316'' brake line kit is made of high-quality copper-coated steel tubing, which is made of sturdy brass, preventing rust and corrosion. It is designed for long-lasting use in automotive brake systems, extending the service life, with reliable performance and durability.. Upgrade to 20 brass fittings 2 316 716-24 Inverted tube nut 10 316 38-24 Inverted Tube Nut 2 316'' 12-20 Inverted Tube Nut 2 316916-18 Inverted Tube Nut 4 316 38-24 threads unions.. Including Double and Single Flaring ToolThe flaring tools included are compatible with copper, aluminum, brass, magnesium and mild steel moving wires. Flaring tool is suitable for metal tubing with outer diameters of 12'', 38'', 516 '', 14 '' and 316'', and it is easy to create single and double flares.. Suitable for various systems 316'' brake pipe kit is suitable for various hydraulic braking systems, fuel systems and transmission systems, and is also an ideal choice for various industrial, domestic and commercial applications.. Package includes 1 tube cutter 1 flaring bar 1 flaring cone 125-foot copper-plated steel brake line 2 316 716-24 inverted tube nuts 10 316 38-24 inverted tube nuts 2 316 12-20 inverted tube nuts 2 316 916-18 inverted tube nuts and 4 316 38-24 threaded unions..

37 45 Dual Degree Flaring DesignThe brake line flaring tool kit can be used to create 37 and 45 degree single, bubble, and double flares on steel, stainless steel, and soft metal copper, aluminum brake lines, transmission cooler lines, and fuel lines. Wide Compatibility with Multiple Tubing SizesFor 316 4.75mm, 14 6.35mm, 516 8mm, and 38 9.5mm tubing,covers most common sizes for automotive brake, fuel and cooling line repair and replacement. Vise Mount Design for Stable Easy OperationBuilt to be securely mounted in a vise. Equipped with a T-handle screw clamp to firmly hold the die and tubing in place, allowing you to make clean, precise flares quickly with minimal effort. Leak-Proof Connection for Automotive Brake LinesWhen building car brake lines, the Professional Brake Flaring Tool Kit adds a flare makes tubing wider to brake line end for a leak-free connection. High Precision for Safe Accurate FlaringKeep your brake flares and brake system safe and at optimal length with this highly precise and accurate flaring tool.

FLARING TOOL - Rogvoc flaring tool kit comes with 2 flaring clamps for pipes with 14, 516, 38, 12, 58, 34 inch O.D., and 6mm, 9mm, 10 mm, 12 mm, 16 mm and 19 mm O.D.. The flaring cone's unique 45-degree eccentric design ensures that every flare is uniform without leak NOTE Only for single flare, not double flare. ROTATING SCREW HANDLE DESIGN - The flaring tool uses a large rotating screw handle, which can easily and quickly complete the flaring work through the 45-degree eccentric cone. Compared with the traditional 37-degree flaring, it is smoother. HIGH QUALITY - Rogvoc flaring tool kit made from the tough steel and chrome materials which support rugged jobs and precision craftsmanship. The set includes a cutter with an internal spring design for intelligent feeding, making pipe cutting less labor-intensive. WIDE APPLICATION - Rogvoc tubing flare tool is applicable to copper tubes and aluminum tubes. Widely used in electrical products, such as HVAC, air conditioners, refrigerators and air heaters etc. 5 IN 1 KIT - Our flare tool set includes the eccentric single flaring tool x 1, flaring clamp x 2 Metric and Inch, pipe cutter x 1, deburring tool x 1, user manual x 1, all in a storage case.

Professional Tool SEEKSELF Brake Line Flaring Tool Kit can be used to create 45-degree single, double and bubble brake flares on stainless steel, steel and some soft metal tubing like copper. Includes 4 Sets of Die Blocks, suitable for 3164.75mm, 146.35mm, 5168mm and 389.5mm O.D. lines.. How to Mount and Use The bottom of the tool should be clamped by a reliable vise, make sure the tool is firmly held before use. NOT suitable for use under car. The set comes with a paper graphic instruction manual.. Precautions Wear goggles and gloves before operating the tool, and stay away from others to prevent debris from popping up when turning the handle.. Package Includes Brake Line Flaring Tool Body Vise Mounted 4 Types of Split Dies 3164.75mm, 146.35mm, 5168mm and 389.5mm Long Lever Handle Instruction Manual Plastic Suitcase.. Friendly Design The split dies are equipped with a limiting hole to effectively avoid them from slipping. The handle is designed to apply force by turning it to the left, which makes it easier for right-handed use and less effort.. The tool body is made of high-quality steel. It is suitable for both amateur and professional car repair work and plumbing work..

DO IT YOURSELF Comes with everything you need for cutting, bending, and flaring metal tubing like a pro. USEFUL ADDITION Perfect for servicing automotive plumbing systems for brakes, transmission, oil, and more. Works for HVAC, plumbing, and electrical projects.. WIDE RANGE OF ADAPTERS Included double flaring adapters fit tubing from 316 inch OD to 58 inch OD. COMES IN Heavy duty blow molded case to keep set protected and organized. EASY TO READ Includes usage instruction with photos.

MAKE DOUBLE BUBBLE FLARES The ABN Double Flare Kit Bubble Flaring Tool create flares for bending brake and fuel pipes, lines, braking pipe repairs, water, gas, refrigeration, and more Fixed head and angles make clean, precise flares Yoke type compressor with T-bar handle for firm grip Cone for accurate alignment For 316, 14, 516, 38, 12, 4mm, 4.75mm, 6mm, 8mm, 10mm steel, aluminum, and copper tubing Adapters included. QUICK PRECISE CUTS Use the included small pipe cutter to cut 18-inch to 58-inch 3-16mm steel, aluminum, and copper tubing Pull back the blade and revolve the pipe while compressing 2 rollers prevent skipping and jumping for most consistent tracking Cutting wheel life and adjustment amount for each turn of tool is directly proportionate to the hardness of material being cut. BUILT TO LAST Swivel constructed from chrome-plated alloy steel to reduce friction Yoke forged from heat-treated steel for maximum strength and longevity that resists corrosion. EASY STORAGE Heavy-duty 11.9 x 2.8 x 9.2 inch 30.2cm x 7.1cm x 23.4cm plastic blow-molded carrying case with latches and handle for easy transportation, safe storage, and quick organization Includes double flaring and bubble flaring instructions for use. PACKAGE CONTENTS Package includes hardened flaring bar assembly clamps with 10 SAE metric tubing sizes 316, 14, 516, 38, 12, 4mm, 4.75mm, 6mm, 8mm, 10mm, corresponding flaring tool adapter dies, yoke assembly reamer, tube cutter 18 to 58 3-16mm, and a carrying case for your convenience.

MultifunctionThis flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on. Durable MaterialYoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction. ApplicationsDouble flaring tool kit suitable for 316, 14, 516, 38, 716, 12, 58 5, 6, 8, 10, 12, 14, 16mm single or double flares Tubing cutter has a 18 to 1-18 inches 3-30 mm capacity with inner outer reamer. Tubing Cutter IncludedPipe cutter has 2 rollers and fold-away slide lock reamer deburring blade used to cut steel, aluminum, and copper tubing cutting wheel life and adjustment amount for each turn depends on material hardness. Easy Storage and PortableHeavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization.

Premium Material Brake line with copper-coated steel for easy bendingflaring. Fittings use high-quality brassrust-resistant, plated for extra corrosion protection. Flaring bar and yoke feature tough high-strength steel for strength and corrosion resistance Chrome swivel in smooth alloy steel reduces friction for accuracy and durability. Length Size This brake line kit comes with a 25-foot length of 316-inch copper-coated brake line, providing ample material to handle most automotive brake line replacement or repair projects, ensuring you have enough length for custom routing and installations. This upgraded kit includes a total of 20 fittings 1. 2 x 316716-24 Inverted Tube Nuts 2. 10 x 31638-24 Inverted Tube Nuts 3. 2 x 31612-20 Inverted Tube Nuts 4. 2 x 316916-18 Inverted Tube Nuts 5. 4 x 31638-24 Threaded Unions. Easy Operation 316 brake lines are easy to be bent, straightened, and flare with no tools. The T-handle offers a sturdy lever that helps reduce user fatigue, enabling you to achieve a flare with minimal effort. Additionally, this double flaring tool kit includes a convenient plastic case for easy storage and portability. Widely Application Flaring tool apply to 12, 38, 516, 14, 316 O.D. tubing. Brake line and fittings are compatible with most hydraulic braking systems, fuel systems, and transmission systems, and much more. Furthermore, they are extensively applicable for household, industrial, and commercial purposes.

The brake repair flaring tool has a 45 flaring cone and different types of expanding adapters and dies, including push connects, GM fuel lines, GM transmission cooling line, 45 and double flares, ISO bubble flares.. It can be used on annealed steel dead soft. Pipe Cutting Deburring The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 18 -58 quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing.. Wide Application This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and air conditioning industry..

INCLUDES This Double Flaring Tool Kit includes one 14-inch adapter, a 516-inch adapter, and a 12-inch adapter and two adapters in each of the following sizes 316-inch and 38-inch. These adapter sizes also cover sizes 4.8-12.7mm. Our Double Flaring Tool kit also includes a mini tubing cutter with a 18- 58-inch capacity and a convenient storage case to ensure that you'll never misplace part of your kit. Additional adapters available in ARES 18020 - Double Flaring Tool Adapter Set.. QUALITY The forged yoke is constructed from premium Heat Treated Steel, and the swivel is constructed of alloy steel with chrome plating to assist in reducing friction.. APPLICATIONS This versatile Double Flaring Tool kit can be used when flaring a double or a single flare in copper, aluminum, brass, magnesium, and soft steel brake line tubing. NOTE This kit is not designed for use with stainless and other hardened steel materials.. RELIABLE EFFECTIVE EFFICIENT Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES double flaring tool, simply contact customer service for troubleshooting help, parts, replacement, or refund.. ASPCA BUSINESS AMBASSADOR We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we're proud to help this great organization..

FuntionThe double flare tool is suitable for 316 and 14 tube, creating 45-degree SAE double flares, single flares and bubble flares. It's a great choice for brake system repairs and hydraulic line maintenance. Applicable MaterialThe brake flaring tool works perfectly with copper, aluminum and nickel-copper tubing. Please do not use it with stainless steel tube, because of material hardness. Easy to useThe compact design of handheld copper flaring tool lets you work effortlessly in tight spaces, even under vehicles. It enables you to work on-the-spot without needing to disassemble tube, saving your time. Whats more, the flaring tool kit is detachable, you could use it with a bench vise. Excellent PerformanceThe brake line flare tool can tightly lock tubing in place, preventing slippage and maintaining perfect alignment with OP1 punche. Forged from premium carbon steel, this brake flare tool kit resists wear and tear, which can be used for a long time. 7Pcs SetThe kit includes dual flaring tool with detachable handles, 2 double-ended OP1 punche, 2 alignment bolt, 1 mold lubricant, 1 hex wrench.

Tube and die set stabilizing arm for easy tube forming. Magnetic adapter holder keeps adapters in place. Equipped with an enlarged die set compression area for better grip of dies. This tool can be used on annealed steel dead soft.

All-in-One Flare Tool Kit Complete kit includes 1 x flaring bar, 1 x yoke with cone anvil, 1 x tubing cutter, and 5 x flaring dies sizes 316, 14, 516, 38, 12, covering most copper, aluminum, brass, magnesium, and soft steel tubing needs.. Durable Premium Materials Flaring bar and forged yoke are crafted from high-strength heat-treated steel for long-lasting durability, while the chrome swivel is made of alloy steel to reduce friction and resists corrosion for accurate, consistent flares.. Easy Effortless Operation T-handle design of the brake line repair kit provides solid leverage to reduce fatigue, and the double wing clamp ensures secure, precise clamping for single or double flares. Tubing cutter delivers clean, precise cuts every time.. Versatile Applications Ideal for brake lines, air conditioning lines, HVAC systems, plumbing, and home improvement projects. Our 45-degree single and double flare tool kit can create perfect single or double flares without damaging tubing. Not suitable for hard materials like hard steel, iron, or stainless steel.. Portable Organized The brake line double single flaring tool kit comes in a durable carrying case for convenient storage and easy transport. Keeps all components secure, organized, and ready for professional or DIY use..

Read Manual Before Operate Designed with user experience in mind, our flaring tool features an ergonomic handle for a comfortable grip and effortless operation. All accessories are custom-tailored for tube flaring, installation, and repair tasks, offering strong compatibility. Even users without professional experience can master it with ease. Package Includes This flare tool kit comes complete with 1 flaring bar, 1 tubing cutter, 1 yoke with cone anvil, and 5 adapters 316, 14, 516, 38, 12. All essential accessories are includedno need for separate purchases. Kit saves your procurement time and costs, prevents workflow disruptions caused by limited specifications, and ensures smoother work processes. Neatly Package This brake line flaring tool kit with customized inner insert ensures every item remains firmly in its designated place, effectively preventing movement, damage, or loss during transit. And case also features a handle, enabling easy transport to any work site whether for on-location service, outdoor setup or workshop tasks. Hard-wearing Material The flaring bar and forged yoke is constructed from high-strength steel by premium heat treated for corrosion, resistance strength and durability. The chrome swivel is made of alloy steel to reduce friction for smoother, effortless operation. More Compatibility This flaring tool kit makes single and double flares on copper, aluminum, brass, magnesium and other soft steel. In addition to brake lines, it can also be used in air conditioning lines, HAVC systems, hydraulic lines.Be favored by professional and DIY enthusiasts for meeting flaring needs in different scenarios such as industrial, home and maintenance use. Prepress operation black adapter only Install the black double flare adapter onto the flaring head, operate the tool to prepress and position the tubing. Remove the black adapter right after prepress.

Versatile Application From copper pipes to fuel, brake, and transmission lines, this hydraulic flaring tool set lets you quickly and accurately fabricate flares for a wide range of plumbing and automotive repairs. Not suitable for stainless steel pipes. Complete Tool Kit Orion Motor Tech's flaring kit includes 45 inverted dies for 316-12, ISO dies for 4.75-10 mm, push connect dies for 14-38, fuel line dies for 516 38, transmission cooling dies for 38 12, and other helpful tools. Precise Cutting Deburring The included cutter makes precise cuts on pipes from 18 to 58, while the deburring tool removes burrs from cut edges, ensuring clean surfaces for flawless and efficient flaring. Built for Tough Jobs Crafted with a durable 42CrMo steel yoke, this hydraulic flaring tool provides exceptional strength and wear resistance, effortlessly withstanding heavy use for long-lasting performance. Compact Portable Securely stored in a rugged blow-molded case with clear size markings, this brake line flare tool kit stays organized and always ready for home or on-the-go tasks.

Clean, Leak-Free 45 FlaresThis brake line flaring tool kit is designed to create precise 45 single and double flares that seal tightly and help prevent leaks. Works on 316, 14, 516, 38, and 12 tubing, ideal for brake lines, fuel lines, and transmission lines.. Heavy-Duty Steel ConstructionThe forged flaring bar and yoke are made from high-strength, heat-treated steel for superior durability and corrosion resistance. The chrome-plated swivel cone is crafted from alloy steel to reduce friction, ensuring smoother and more accurate flaring.. Secure Clamping, No SlippageEquipped with a precision-machined flaring bar and strong dual clamp screws, this double flare tool kit firmly holds tubing in place, preventing slipping or misalignment. Helps produce clean, centered flares even on common 316 brake lines.. All-in-One Complete KitIncludes 1 flaring bar, 1 yoke with cone anvil, 1 tubing cutter, and 5 adapters 316, 14, 516, 38, 12. No need to purchase extra toolseverything you need for most flaring jobs is in our brake line flaring tool set.. Wide Application Easy to UseDesigned for copper, aluminum, brass, magnesium, and other soft steel tubing. This brake flare tool kit is suitable for brake lines, air conditioning lines, HVAC systems, and hydraulic repairs. Ergonomic handle design allows both professionals and DIY users to operate with ease.. NoteThe double flare tool for brake lines is designed for use on soft metals only. Not suitable for hardened steel, iron, stainless steel, NiCopp lines, or 37 gas fittings..

DURABLE MATERIAL - Made of heat-treated chrome vanadium steel with mirror chrome finish for longevity and durability. VERSATILE SET - Grips 8 common sizes of flare nut 14-516, 38-716, 12-916, 58-1116. CLASSIC 6-POINT DESIGN - Fits fasteners better, providing a tight grip and more contact points. 15 OFFSET DESIGN - Ergonomic head design provides space for knuckles, great for hard-to-reach areas. CONVENIENT STORAGE - Includes portable organizer pouch for easy organization and access.

Complete Brake Line SolutionOur 316 Brake Line Kit includes everything you need for a complete brake line installation. Including 1 25ft copper coated brake line, 16 brake line fittings, 4 threads unions, 1 tube cutter, 1 flaring bar, 1 flaring cone, 5 adapters, 1x tube bender and 1 tool box for efficient brake line repair and installation.. Enhanced SafetyRegular maintenance and replacement of brake lines are crucial for vehicle safety. Replacing aged or damaged brake lines with our brake line kit to help ensure optimal braking performance, keeping you safe on the road.. SingleDouble Flaring ToolOur brake line flaring tool kit handles single and double flaring in materials such as brass, copper, aluminum, magnesium and mild steel brake tubes, making them great for brake, fuel and transmission lines, ensuring a secure and leak-free connection. The brake line flaring tool is suitable for 316, 14, 516, 38, 12 metal tubing.. Rust and Corrosion Resistance316 Brake Line are manufactured in a premium copper-coated alloy to ensure long-lasting performance and provide maximum wear and rust protection, and are easy to bend and expand by hand The joint included is made of brass, which is not easy to rust and has a long service life, ensuring that your brake system is safe and effective.. Widely UsedBrake line repair kit are widely used in industrial, domestic and commercial applications such as automotive repair, plumbing, HVAC, home improvement projects, etc., compatible with most vehicles, including cars, trucks and SUVs, and suitable for most fuel systems, hydraulic brake systems and transmission systems, etc...

5PCS Set Includes Eccentric Single Flaring Tool, 2 Flaring ClampsMetric Imperial types, Pipe Cutterfor 5-32mm or 15'' to 1 14'' tubes, Deburrer and Manual, all in a nice storage case.. Kind Reminder All the kit will come with a 14 copper flare, which is normal, NOT used product. Because All flaring tool kits are inspected by quality inspectors before leaving the factory, this short 14 inch flared copper is a test sample that they have tested and proves that the tool can indeed produce a perfect flare.. Flaring Tool Only for single flare, 45 eccentric type cone design makes it easier to produce a smooth quality flare without leak. Equipped with 2 Clamps, compatible with 14, 516, 38 , 12, 58 , 34, 6mm, 9mm, 10mm, 12mm, 16mm and 19mm O.D. tubes. Suitable for the soft copper, brass, aluminum, mild steel tubes, air heaters, refrigerator, air conditioners, HVAC, electrical products, etc. Not suitable for super soft aluminum. Unique Design Check it in the 4th and 5th picture. The arrow on the tool and the slot on the clamp side ensure the tool is in place. The guide plate will help you quickly confirm the perfect length of the tube above the clamp opening for better size flare. When finishing flaring, the clutch in the rotating handle will be separated.. High Quality The handle is made of aluminum alloy, durable and will last for a long time. The flare tool with the deburr tool and cutter makes perfect flares every time. What a heavy duty tool kit The suitcase makes it easier to keep and carry..

Precise DINISO Brake Flare Tool Kit - Create professional bubble flares with precision on copper, brass, aluminum, and mild steel, ensuring a perfect fit for brake line repairs and installations.. Versatile Compatibility - Equipped with 4.75mm CNF-3, 6mm CNF-4, 8mm, and 10mm dies, this hydraulic brake line flaring tool set caters to both European and American vehicles. Safety Assured - This brake line flaring tool kit ensures your vehicle's braking system maintains integrity with leak-proof and secure bubble flares, crucial for your on-road safety. Effortless Operation Durability - Constructed with heat-treated steel for longevity, the flaring bars provide a solid grip on tubing, allowing for easy creation of perfect flares in a single motion. Comes in a Portable Case - The brake flaring tool kit comes organized in a sturdy, blow-molded case, enhancing portability and ensuring each component is readily accessible.

All-In-One Kit - This all in one kit is a flaring and swaging tubing combination suite and include a professional tubing cutter and storage case Great for flare fitting process and providing all the tool necessary for the mechanics Note this is a NOT a double flaring tool. Complete Flare Adapter Set - Flaring tool adapter sizes 18, 316, 14, 516, 38, 716, 12, 58 34 7 swage fitting adapter sizes 316, 14, 516, 38, 12, 58, 34. Operate with Precision - Heat-treated swivel type adjustment bars are hardened steel chrome finished provide durability and secure grips on tubing allow you to make precise adjustments to the desired size with ease. Produces 45 Degree Flares on soft copper, brass, aluminum and mild steel tubing The Yoke Clamp with ergonomic wide feed handle allows an easy clamping and removing. Self-Centering Yoke - The flaring tool set includes two adjustment bars with a self-centering yoke that helps you form quality and professional flares and swages.

LEAK-TIGHT 45 FLARES The off-center cone rolls the tube end for smooth, uniform flare walls, helping reduce cracked edges, galling and leak risk on copper tubing flaring tool hvac jobs and R-410A connections. 7-DIE SIZE COVERAGE More flexible than common 6-die sets, this tubing flaring tool includes 316, 14, 516, 38, 12, 58 and 34 in holes for common OD tube sizes. FAST CLAMPING CONTROL This brake line flaring tool kit has a single clamp screw holds material securely while the large feed handle turns smoothly with less effort, making flare tool hvac setup easier for pros and serious DIY repairs. BUILT FOR SOFT METALS Heat-treated silver bars grip copper, brass, aluminum and mild steel tubing for consistent results on water, gas, refrigeration, mini split plumbing, fuel line flaring tool and brake line flaring tool tasks. FIELD-READY FOR PROS DIYERS Compact set keeps setup simple on job sites, workshops and home installs use this hvac flaring tool kit after cutting and deburring tube ends for best seal results.

Designed to make double or single flares in copper, aluminum, and brass tubing as well as soft steel brake line tubing. Chrome plated alloy steel swivel reduces friction and helps ensure a smooth, even flare. Comprehensive set includes five adapters - 316, 14, 516, 38, and 12 inch 4.8, 6.4, 7.9, 9.5, and 12.7 mm. Forged, heat-treated steel yoke for long term performance and durability. Rugged blow molded plastic storage case keeps tools contained and organized so they are ready when you need them.

Creates single or double flares on 316 4.75mm and 14 tubing.. Low Profile Design Allows Tubing to be Flared in Tight Spaces.. The vise assembly holds tubing centered securely without marring.. Depth stop ensures proper tubing length..

TUBE AND DIE SET STABILIZING ARM for easy tube forming. MAGNETIC ADAPTER holder keeps adapters in place. EQUIPPED WITH AN ENGLARGED DIE SET COMPRESSION AREA for better grip of dies. THIS TOOL CAN BE USED ON annealed steel dead soft. INCLUDES 316, 14, 516, 38 and 12 dies 316, 14, 516, 38 and 12 double flare adapters and 37 cone packaged in a blow molded case. Fit type Vehicle Specific.

Covers single double and bubble type flares. Single flare standard lines 316 inch - 58 inch and single flare metric lines 4 millimeters - 14 millimeters. Double flare standard lines 316 inch - 12 inch and double flare metric lines 4 millimeters - 10 millimeters. Bubble flare standard lines 316 inch - 12 inch and bubble flare metric lines 4.75 millimeters - 10 millimeters. Kit contains flaring bar, arbor press, adapters, tube cutter, and debarring tool - all in a hard case.

Professional Brake Flaring Tool Designed to create accurate 45 Degree single flares, double flares, and bubble flares for brake lines, transmission cooler lines, and fuel lines. Wide Compatibility. Durable Precise Construction Made from high-quality, heat-treated steel with an oxidized finish for durability. Easy Operation One full press of the lever creates perfect flares. Designed for bench-mounted vise use, with a long T-handle for better leverage and effortless operation. NOT suitable for use under car. User Tips Deburr tubing before flaring, apply anti-seize and light oil for smooth operation. Wear goggles and gloves and keep a safe distance during use.

ERSATILE APPLICATION Perfect for hydraulic brake line repair, restoration projects, custom brake systems, and general tubing maintenance.. DURABLE HIGH-QUALITY Made from hardened steel for long-lasting reliability, resistant to wear and corrosion under heavy use.. COMPLETE 7-PIECE KIT Includes flaring bar, yoke, 5 die sizes for perfect fit ideal for DIY brake hydraulic repairs and maintenance.. PRECISE 45 FLARES Easily create single, double, and bubble 45 flares on 316 and 14 SAE brake tubing ensures tight, leak-free connections.. Thank you for purchasing our brake line flaring tool kit. If you have any questions, concerns, or issues while using the product, please feel free to reach out to us anytime we provide 24-hour customer support through Amazons messaging system. Your satisfaction is our top priority, and were dedicated to helping you resolve any problem as quickly as possible..

5-in-1 Multi-Size Clamps for Universal CompatibilityThis all-in-one flaring kit includes 2 types of clamps inch and millimeter with 6 dies each, covering 12 common pipe sizes 14, 516, 38, 12, 58, 34 inch and 6mm, 9mm, 10mm, 12mm, 16mm, 19mm metric. Specifically optimized for R410a flares, it works seamlessly with copper, aluminum, and mild steel tubingmaking it a versatile tool for automotive brake systems, HVAC repairs, refrigeration maintenance, and plumbing projects.. Durable Aluminum Alloy Build with Portable DesignCrafted from high-quality aluminum alloy, this flaring tool offers exceptional durability and resistance to wear, ensuring long-term reliable performance even in heavy-duty use. Weighing less than 2.2Lbs, its lightweight enough for extended handheld operation without straining your hands. All components are neatly stored in a sturdy plastic toolbox, keeping parts organized, preventing loss, and making it easy to transport to job sites, garages, or home workshops.. 45 Precision Eccentric Flaring Cone for Leak-Proof Connections45 flaring tool features a precision-machined eccentric hardened steel cone and 6 matching dies, designed to create perfect, uniform flares on 14-34 copper, aluminum, and mild steel tubing. The eccentric mounting design enables smooth rolling action, ensuring even metal flow that forms thick, consistent flare wallseliminating wear, cracks, or uneven edges that cause leaks. Ideal for HVAC systems, refrigeration units, plumbing projects, and R410a applications, this tool delivers airtight, long-lasting connections for professional and DIY use.. Precision Scale Auto-Disconnect Clutch for Effortless OperationEquipped with a calibrated location steel bar, side yoke holes, and a limit piece, this flaring tool eliminates guesswork in tube length measurement. Simply insert the tube, secure the limit piece to set the flare length, and avoid inaccurate eye measurementsboosting efficiency and consistency. Plus, the built-in clutch in the rotating handle automatically disconnects the tool from the pipe once flaring is complete, preventing over-flaring and reducing hand fatigue. Perfect for both seasoned technicians and beginners.. Complete Flaring Kit for Professionals DIY EnthusiastsThis all-in-one Metric SAE Flaring Tool Kit has all essentials for instant use 1x black gantry, 1x inch-size flaring clamp, 1x millimeter-size flaring clamp, 1x pipe cutter, 1x deburring tool, 1x bag. Ideal for professional mechanics, HVAC technicians, plumbers and DIY hobbyists, this comprehensive set streamlines flaring tasks, cuts tool assembly time, and delivers consistent professional-grade results. The ultimate automotive brake repair tool for brake line repair, plus a go-to HVAC maintenance tool for residential commercial plumbing projectsyour all-purpose 45 flaring tool kit for all repair needs..

Get the job done in half the time this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 316 in. tubing such as brake lines. Works flawlessly with 316 in. steel, nickel, and copper tubing. Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots. Detachable die lets you also use with a bench vise. All-in-one tool. All you need is a 10 mm and a 17 mm wrench to work with the tool.

MATERIALRacewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance. UPGRADE TO 20 FITTINGS 2 x 316 716-24 Inverted Tube Nut 10 x 316 38-24 Inverted Tube Nut 2 x 316 12-20 Inverted Tube Nut 2 x 316916-18 Inverted Tube Nut 4 x 316 38-24 threads unions. RUST AND CORROSION PROOFINGOur 316 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions. MAKE DOUBLE SINGLE FLARES Designed to use when flaring single or double flare in a variety of material copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 12, 38, 516, 14, 316 O.D. tubing.. WIDELY APPLICATIONBrake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..

ALL IN ONE KIT - BEAMNOVA flaring tool kit includes 1 Flaring Cone, 2 Flaring Bars, 5 Swaging Fitting, 1 Tube cutter, 1 Ratchet wrench, and 1 Storage Case. Convenient to store, quick organization, and take out. Easier to use in the garage, home, or anywhere you like to work on cars, trucks, or SUVs.. COMMON FITTINGS - BEAMNOVA flare tools apply to 18, 316, 14, 516, 38, 716, 12, 58, 34 O.D. tubing. NOTE The kit is for single flare, not double flares.. RUGGED DURABLE - BEAMNOVA flaring kit is made of heavy-duty steel and chromed plated, hard, and great for long-term use.. USER-FRIENDLY - The flaring tool includes two adjustment bars with a self-centering yoke that helps form quality and professional flares. It also provides a refrigeration ratchet wrench to open square valves on hose bibs and acetylene tanks.. WIDE COMPATIBILITY - Designed for copper, brass, plastic, aluminum, magnesium, and soft steel pipes. Fits all standard high-pressure fittings. Ideal for water, gas, air heater, refrigeration applications, and other household electrical products..

VARIOUS APPLICATIONS - TUBPRO double flaring tool set is designed to create 45-degree double or single flares in copper, aluminum, magnesium, soft steel brake lines and brass tubing NOT APPLICABLE WITH HARD MATERIAL LIKE STEEL, IRON........ PACKAGE CONTENTS - 1 flaring cone, 1 flaring bar flaring yoke, 1 tube cutter, 5 adapters and 1 blow-molded case for easy transportation and storage, meets all your needs.. PREMIUM MATERIAL - The flaring bar and forged yoke is constructed from premium heat treated steel for strength and durability. The chrome swivel is made of alloy steel to reduce friction.. ALL IN ONE SET - 5 sizes of adapters 316, 14, 516, 38 and 12 and a cutter for 18-58 pipe make the flaring tool versatile. It can be used on brake line, air conditioning brass line, HAVC and so on..

Professional Time-Saving Our Brake Line Flaring Tool Kit simplifies creating standard 45-degree single, bubble, and double flares on tubing. It works perfectly for brake lines, transmission cooler lines, and fuel lines, enabling quick and easy operation that cuts down your working time and repair costs for vehicle projects. Wide Compatibility Our brake flare tool kit fits 316, 14, 516, 38 diameter tubes. Its suitable for soft metals like copper and aluminum, as well as 304 stainless steel and steel tubing, making it essential for DIY enthusiasts and professional mechanics. Vise-Mount Design Use our brake flare tool kit with a bench-mounted vise in your workshop or a hitch-mounted vise in the field not for under-car use. The 6-inch T-handle screw clamp secures the die and tube firmly, allowing you to make precise flares effortlessly. Durable Stable Crafted from high-quality stainless steel, the tool undergoes heat treatment and oxidation for extreme hardness and damage resistance. Professional design and rigorous testing ensure accurate and stable performance, consistently producing perfect 45-degree flares. Practical Usage Tips Deburr tubing inside and out to remove shavings before flaring. Apply a small amount of anti-seize to the cut tube end and add oil to flaring cones OP.1 OP.2 for smoother operation. Remember to attach proper fittings with flared ends facing outward.

Professional ToolsThis Brake Line Double Flaring Tool kit is suitable for 316 and 14 tube, creating 45-degree SAE double flares, single flares and bubble flares.It's a great choice for brake system repairs and hydraulic line maintenance. Package IncludedThis kit includes dual flaring tool with detachable handles, 2 double-ended OP1 punche, 2 alignment bolt, 1 mold lubricant, 1 hex wrench. Compact Portable Made of high-quality carbon steel, the double flare tool for brake lines is high-strength, wear-resistant, and durable, able to withstand the harshest working environments. The handle is coated with a non-slip plastic layer for a secure grip and safe use.. Easy to useThe compact design of handheld copper flaring tool lets you work effortlessly in tight spaces, even under vehicles. It enables you to work on-the-spot without needing to disassemble tube, saving your time. Whats more, the flaring tool kit is detachable, you could use it with a bench vise. Detachable Handle Compact and user-friendly handheld design allows for easy operation even in tight chassis spaces, enabling brake line repairs to be done directly on the vehicle. The handle is detachable and can be clamped on a bench vise if necessary..

VERSATILE APPLICATIONS FOR SOFT METAL TUBING Designed as copper flare tool compatible with aluminum, brass, magnesium, and soft steel tubing, this brake line flaring tool kit supports brake lines, fuel lines, HVAC, and air conditioning work NOT APPLICABLE WITH HARD MATERIAL LIKE STEEL, IRON....... PRECISION 45 SINGLE DOUBLE FLARING PERFORMANCE This brake line flaring tool kit is engineered as a brake line flaring tool and double flare tool to create clean 45 single and double flares on 316, 14, 516, 38, and 12 tubing for secure, leak-resistant connections. STRONG CLAMPING FOR STRAIGHT, ACCURATE FLARES Unlike basic flare tools, this tubing flaring tool uses a heavy-duty flaring bar with dual wing screws to hold tubing firmly, reducing slipping and uneven results when used as a brake flare tool or brake line flare tool. HEAT-TREATED STEEL FOR SMOOTH OPERATION This tube flaring tool is built as a durable copper flaring tool kit, the forged yoke and precision-machined bar are made from heat-treated steel, while the chrome swivel cone reduces friction for smoother use as a double flaring tool and pipe flaring tool. COMPLETE ALL-IN-ONE SET WITH CUTTER CASE This brake flare tool kit includes a flaring bar, yoke with cone anvil, 5 adapters, a brake line cutter for 1858 pipe, and a blow-molded case, covering most brake flaring tool and double flare tool for brake lines needs with this copper pipe cutting and flaring kit.

Applicable Tubes The brake line flaring tool works perfectly with copper, aluminum and nickel-copper tubing Please do not use it with stainless steel tube, as its material is too hard. Precision Tool This brake line flare is suitable for 316 and 14 tubes, creating 45 SAE double flares, single flares and bubble flares, ensuring secure and safe connections good choice for brake system repairs and hydraulic line maintenance. Ease to Use The flaring tool kit can tightly lock tube in place, preventing slippage and maintaining perfect alignment with OP1 punches with extra gifts tube cutter for tube cutting hex wrench for tighten and unscrew bolts and a pair of gloves for convenient operation. Premium Material Made from high-strength carbon steel, this double flare tool is durable and resistant to wear, capable of withstanding long-term use. Kit Includes The line flare tool includes 1x dual flaring tools in 316 and 14 sizes 1x detachable handle 2x positioning bolts 2x double-ended OP1 punches 1x mold lubricant 1x hex wrench 1x tube cutter 1x instruction book 1x pair of gloves and 1x blow-molded case.

Eccentric cone - The hardened steel flared cone installed eccentrically produces a rolling effect, ensuring uniform metal flow and a uniform and wear free flared wall. Produce rolling effect, making the expanded wall uniform. Applicable pipeline outer diameter 1451638125834 6910121619mm. Widely used - Flaring tools are suitable for soft metal pipes such as copperaluminum pipes. Widely used in electrical products such as HVAC, air conditioning, heating fans, refrigerators, etc. Create 45 degree precision flares in soft copper pipes, brass pipes, aluminum pipes, and low-carbon steel pipes. Including reamers and pipe cutters, PVC pipes can also be cut.. This flare tool includes the gantry 1, inch-type flaring clamp 1. Blow molded hard plastic storage case keeps tools contained and organized, provides a convenient handle for easy transportation and portability..

List of Packages 1 x 25 ft 316 Zinc-plated brake line with 24pcs brass fittings, 1 x 25 ft 14 Zinc-plated brake line with 20pcs brass fittings, 1 x brake line flaring tool kit, 1 x 3-in-1 pipe bender, 1 x inner-outer pipe reamer. Zinc-Plated Carbon SteelBrake lines are constructed from carbon steel with a Zinc-plated coating. It is rust-proof, corrosion-resistant, durable in harsh environments, and long-lasting. The single double flaring tool kit Designed to use when flaring single or double flare in a variety of soft material copper, aluminum, brass, magnesium, and soft steel brake line tubing. 5 adaptors-316, 14, 516, 38, and 12 inch. The pipe cutter is for 18-58 O.D. tubing. Tube Bender and Reamer The 3-in-1 pipe bender can bend copper, aluminum, brass, and thin stainless steel pipes from 0 to 180 degrees, suitable for pipes with outer diameters of 14, 516, and 38. The tubing reamer is suitable for the diameter of tubing and pipes from 316 to 1-58 inch. Widely Application Suitable for most fuel systems, hydraulic brake systems, transmission Systems,etc. Whether for home DIY projects, industrial or commercial applications, it delivers reliable and efficient brake line solutions.

Time-Saving Professional Flaring Kit Create perfect 45-degree single, double, and bubble flares in minutes This flaring tool simplifies brake line, transmission cooler line, and fuel line repairssaving both time and money on DIY projects and professional jobs.. Universal Compatibility for Various Tubing Works flawlessly with 316, 14, 516, 38 soft metal tubes copper, aluminum and even 304 stainless steel steel tubing. A must-have for mechanics and car enthusiasts handling brake repairs, fuel lines, and hydraulic systems.. Heavy-Duty Precision-Engineered for Accuracy Forged from heat-treated, oxidized steel for extreme hardness and damage resistance. Rigorously tested to deliver consistently accurate flaresevery time. Trusted by professionals for reliability and flawless performance.. Secure Vise Operation for Stable Flaring Designed for use with a bench-mounted or hitch-mounted vise not for under-car use. The 6-inch T-handle screw clamp keeps dies and tubing firmly in place, ensuring quick, safe, and easy flare formation.. Pro Tips for Perfect Flares Deburr tubing inside and out before flaring. Apply anti-seize to tube ends and lightly lubricate flaring cones OP.1 OP.2 for smooth operation. Always remember to slide fittings onto the tubing before flaring.

Widely Application 316 Brake line kit fits for most hydraulic braking systems, fuel systems and transmission systems,etc. It is also widely used for industrial, household, and commercial purposessuch as HVAC,automotive maintenance,pipelines,home improvement works,etc.. Soft and Flexible 316 Copper Coated Brake Line is very easy to bend and open, Easy to Bend and Flare without the need for bending tools.And also,the brake line comes with 16 x Brake Line Fittings and 4 x Threads Unions. Your Satisfaction, Guaranteed We stand behind our Brake Line Kit. If any problem arises, including rust, missing parts, or any quality defect, please reach out to us directly through Amazon email. We are committed to resolving your concern promptly with a full replacement or refund, no questions asked. Easy to Use Flaring tool kit comes with everything you need for cutting and flaring metal tubing1x Flaring Bar,1x Tubing Cutter,1x Flaring Cone,5x Adapters,1x Tube Bender,you can easily make single or double flares metal tubing.Not only for brake lines,but also for copper,alminum,brass,magnesium,and other soft steel lines. Adapt to Different Size Pipes Flaring tool kit is suitable for single or double flared metal tubing of 316 ,14,516 ,38,12the tubing cutter has a 18 to 58 capacity with innerouter reamers.

Professional Brake Line Flare Tool KitIncludes 45-degree 37 degree rotating die heads, one handle, 4 dies of sizes 316, 14, 516 and 38, 10pcs sanding knives, one pair of gloves, and a sturdy storage box.. Suitable for Various MaterialsMade from high-quality steel, it is manufactured through heat treatment and oxidation treatment. It is sturdy and wear-resistant, and can easily cut through pipes of various materials such as aluminum pipes, brass pipes, plastic pipes and soft metals. Not applicable for stainless steel pipes.. Multiple Die Set Includes 316, 14, 516 and 38 for different flaring tasks. It is a must-have tool for DIY enthusiasts, professional technicians and car lovers.. 45 37Includes two rotating die heads, can easily create single, bubble and double flares. They need to be clamped in vices or telescopic vices. Adjust the knobs to the zero position to align the tubes with the molds.. Precision FlaringJust ensure that the tube is placed flat in the mold, and use the T-handle fixture to lock the pipe and the die together. Before locking, keep the spring and screws lubricated, without any metal debris or impurities, and the precise expansion can be easily achieved..

ALL-IN-ONE KIT START FLARING RIGHT AWAYThis complete brake line flaring tool kit includes 37 45 die heads, 4 sizes of dies 316, 14, 516, 38, pipe cutter, deburring tool, and replacement bladeseverything you need to start flaring immediately without extra purchases.. PRECISION FLARES CLEAN, CENTERED, LEAK-FREEEngineered for accurate single, double, and bubble flares. The stable clamping system and precision dies help produce clean, centered flares that seal properlyreducing the risk of leaks, cracks, or rework.. 37 45 DUAL SYSTEM COVER MORE JOBSSupports both SAE 45 and ANJIC 37 flares, making it ideal for brake lines, fuel lines, and transmission cooling lines. One tool handles multiple standardsperfect for automotive repair and custom tubing work.. ROTATING DIE HEAD FAST ERROR-FREE SETUPQuickly switch between sizes with the rotating die headno need to disassemble parts. Clear, easy-to-read size markings help you choose the correct setup faster and avoid mistakes during operation.. HEAVY-DUTY BUILD MADE FOR REPEATED USEConstructed from heat-treated steel for strength and durability under pressure. Designed for copper, aluminum, and soft steel tubing commonly used in automotive systems. Not recommended for stainless steel tubing..

Package Includes - The package includes 1 x 25 Ft. 14 Copper-coated Brake Line, 16 x Brake Line Fittings, 4 x Unions, 1 x Tubing Cutter, 1 x Flaring Bar, 1 x Flaring Cone, 5 x Adapters, and 1 x Tool Box. This comprehensive package includes all the necessary tools and components for brake line installation and repair.. High Quality Brake Line - MuHize 14 brake lines are made with a unique surface treatment, featuring copper coating. This copper-coated brake line offers better corrosion resistance compared to standard steel tubing. It ensures long-lasting durability and reliable performance for your braking system.. Super Easy Bending Flaring - MuHize brake line tubings are designed with great flexibility, making them easy to be bent by hand. This allows for easy installation in various positions and angles. Additionally, the flaring tools included in the kit make it simple to create single or double flares, ensuring a secure and leak-free connection.. Different Sizes - MuHize double single flaring tool kit comes with 5 adapters, allowing for the use of different sizes of tubing. The adapters cover sizes including 316, 14, 516, 38, and 12, making it suitable for a wide range of tubing sizes. This ensures that the kit can accommodate the needs of the majority of brake line systems.. Widely Application - This double flaring tool kit is not only suitable for brake lines, but also for various other systems and applications. It can be used for copper, aluminum, brass, magnesium, and other types of tubing in water, refrigeration, HVAC, and other applications. This versatile tool kit offers flexibility and convenience for a variety of projects.. Profession - Upgrade your brake line system with the MuHize double flaring tool kit, featuring high-quality brake lines and a comprehensive set of tools. With excellent corrosion resistance and easy installation, MuHize provides reliable products that meet your brake line needs..

Package Include - 1 x 25 Ft. 316 Copper-coated Brake Line 16 x Brake Line Fittings 4 x Unions 1 x Tubing Cutter 1 x Flaring Bar 1 x Flaring Cone 5 x Adapters 1 x Tool Box.. High Quality Brake Line - MuHize 316 brake lines are made with unique surface treatment. The lastest copper-coated brake line is better than standard steel tubing with corrosion resistance.. Super Easy Bending Flaring - MuHize brake line tubings are easy to be bent with great flexibility by hand. With the flaring tools in the tool box, you can easily make single or double flares.. Different Sizes - MuHize double single flaring tool kit with 5 adapters can be used for different sizes 316, 14, 516, 38, and 12 tubings, meeting the needs of the vast majority sizes of tubing.. Widely Application - This double flaring tool kit can not only be used for brake lines, but also for copper, aluminum, brass, magnesium, and other systems like water, refrigeration, and HVAC applications..

The right tool Get the job done with the NAVAC NEF6LM breakfree power flaring tool. Featuring a battery power indicator and a built-in flashlight, it can complete a quick and accurate flare in 15 seconds. Included lanyard for drop protection.. Cord-free No power supply is needed with our intuitive cordless design. 1 high performance rechargeable lithium battery is included with the flaring tool, as well as its charger. Quick chargeonly takes 30 minutes and produces over 100 flares per charge.. Easy operation Weve developed the tool to be quick and simple to operate. All it requires is one hand and one buttonno extra tools or another set of hands required to run.. Accuracy With included ready-to-use clamps, the flaring tool is precisely manufactured for accurate, consistent flares at five different sizes. Featuring a 45 degree flare cone for R410a, the included flare gauge helps ensure leak-free flare connections.. Encouraging Smart Work NAVAC is a globally recognized brand committed to advancing the HVAC industry through cutting-edge technology and innovative tool design. NAVAC delivers reliable and durable products that empower professionals to work smarter..

Kit contentsThis double flaring took kit include 1 pcs 316-Inch Double Flaring ToolRemovable Handle,1 psc Double Ended OP1OP2 Punch,1 psc Locating bolt and 1 psc lubricant.. Fine workmanshipThis double flaring tool is made of high-quality alloy steel grinding ,lightweight,durable.. VersatileThis flaring tool kit is suitable 316 inch Automotive Brake nickel-copper tubing LineThis took kit can not use on stainless steel tubing.. Ergonomic designKnob provides a firm grip. Flaring tubes become a comfortable and quick task.. Quality serviceWe truly believe our tool kit is the best in the marketplace and we stand by that. If our tool doesnt work, well FULLY REFUND YOU. So, click Add to Cart now and buy with confidence..

Flare Like a Pro Orion Motor Tech's flaring tool kit includes 316, 14, 516, and 38 dies, allowing you to easily create leak-proof flares on copper, aluminum, and other metal pipes. Not suitable for stainless steel pipes. Ultimate Versatility With dual rotating die heads offering 37 and 45 angles, you can easily create single, bubble, and double flares, perfect for brake lines, fuel lines, transmission cooler lines, and more. Built for Tough Jobs Made of premium steel, this brake flare tool kit provides exceptional strength and wear resistance, handling even the most demanding tasks without breaking down. Precision Flaring The intuitive labels on the die head help you quickly align the tube flush with the dies and select your desired size, ensuring precise flaring with every use. Hassle-Free Operation Achieve perfect flares with just a full press of the lever Our flaring tool set mounts securely on a vise for stability, while the included T-handle ensures the dies and pipes stay firmly in place.

Professional Tools To Save Your Time - The Brake Line Flare Tool Kit makes short work of making tubing into a standard 45 degree single flare, bubble flare or double flare. Great for making perfect flares on brake lines, transmission cooler lines and fuel lines. Easy and quick operation will save you time and money when creating brake lines on your project.. Wide Application - The brake flaring tool can be used with 316, 14, 516, 38 and 4.75mm diameter various tubes. Brake flaring tool applicable for soft metal tubes, including copper and aluminum, works with 304 stainless steel, steel tubing. making it a must-have brake flaring tool for the DIY or mechanic.. Durable, Stable And Accurate Flaring Tool - The brake line flaring tool are made of high-quality steel, heat-treated and oxidized for extreme hardness, durability and resistance to damage. Meanwhile, through professional design and rigorous testing, our brake line flaring tool are extremely accurate and stable, and can produce three types of perfect 45-degree flares in a short period of time, which is a professional brake line and fuel line flaring tool. Use Your Vise - Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field not intended for use under car 6-inch 15.2 cm T-handle screw clamp holds die and tube in place so you can create flares quickly and easily. Tips for Use Before doing a flare, deburr the inside and outside of the tubing to ensure that metal shavings and impurities are removed from the inside and outside of the tubing. Then, apply a small amount of anti-seize to the end of the cut tubing to prevent problems when squeezing. Also, it can be added a little oil to the flaring cones OP.1 and OP.2. Finally, it is a matter of taking care to put the appropriate fittings on the ends of the tubing, with the flared ends facing outward..

Professional-Grade Efficiency - The brake line flare tool kit create perfect 45 singledoublebubble flares in time ideal for brake lines, fuel lines, and transmission coolers. Save 50 labor time vs. traditional methods, with vise-mounted stability ensuring pro-level results every time.. Professional-Grade Flaring Kit - The brake flaring tool create perfect flares with 3164.75mm, 14, 516, and 38 dies. Works seamlessly on copper, aluminum, stainless steel, and most metal tubing for automotive or plumbing applications.. Heavy-Duty Construction - Machined from heat-treated alloy steel for long-term durability. Engineered to withstand repeated use on hard metals without warping or tool slippage.. Stable Flaring Process - Simply pull hard on the lever for perfect flaring Our brake line flaring tool mounts securely on a vise for stability, while the included T-handle ensures the dies and pipes stay firmly in place.. TIPS For Perfect Flare ? Cut cleanly with a tube cutternot includekeep edges smooth and round for perfect flares. Deburr the inner edge 10-15 to remove shavings, then wipe the pipe exterior. Lightly coat the trimmed end with anti-seize lubricant before assembly. Clean cuts leak-free seals.

Complete Fittings The 25 ft brake line kit comes with everything you need to replace or install a new brake line system on the vehicle, saving time and money compared to purchasing individual parts.. Rust and Corrosion Prevention Our 31614 Copper coated steel lines are the longest lasting brake line, very suitable for vehicles driving in adverse weather and environmental conditions. And all brake line fittings are made of premium brass to prevent rust and plated for corrosion resistance.. Make Double Single Flares Designed to use when flaring single or double flare in a variety of material copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 12, 38, 516, 14, 316 O.D. tubing.. Widely Application Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses.. Brake Line Bender Use with tubing with 18, 316, and 14 in. outer diameter..

Professional Brake Flaring Tool Kit adds a flare makes tubing wider to brake line end for a leak-free connection without hours of hand cramping or twisting exercises. 3745-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal copper, aluminum brake lines, transmission cooler lines, and fuel lines For 316-inch 4.75mm, 14-inch 6.35mm, 516-inch 8mm, and 38-inch tubing. Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field not intended for use under car 6-inch 15.2 cm T-handle screw clamp holds die and tube in place so you can create flares quickly and easily. Brake line flare kit includes 1 brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve 27.9x12.7 cm, 4 end dies, 1 instruction manual, and 1 14.1 x 6.1 x 3.5 inch 35.8x15.5x8.9 cm plastic blow-molded carrying case.

Professional Tool SEEKSELF Brake Line Flaring Tool Kit can be used to create 45-degree single, double and bubble brake flares on stainless steel, steel and some soft metal tubing like copper. Includes 4 Sets of Die Blocks, suitable for 3164.75mm, 146.35mm, 5168mm and 389.5mm O.D. lines. Also includes 1pcs 3 to 19mm 18'' to 33'' tubing cutter.. For Vise Mounting Only The bottom of the tool should be clamped by a reliable vise, make sure the tool is firmly held before use. NOT suitable for use under car. The set comes with a paper graphic instruction manual.. Precautions Wear goggles and gloves before operating the tool, and stay away from others to prevent debris from popping up when turning the handle.. Package Includes Brake Line Flaring Tool Body Vise Mounted 4 Types of Split Dies 3164.75mm, 146.35mm, 5168mm and 389.5mm Long Lever Handle 1PCS 3 to 19mm 18'' to 33'' Tubing Cutter Instruction Manual Plastic Suitcase.. Friendly Design The split dies are equipped with a limiting hole to effectively avoid them from slipping. The handle is designed to apply force by turning it to the left, which makes it easier for right-handed use and less effort.. The tool body is made of high-quality steel. It is suitable for both amateur and professional car repair work and plumbing work..

Professional Tool SEEKSELF Brake Line Flaring Tool Kit can be used to create 37-degree 45-degree single, double and bubble brake flares on stainless steel, steel and some soft metal tubing like copper. Includes 4 Sets of Die Blocks, suitable for 3164.75mm, 146.35mm, 5168mm and 389.5mm O.D. lines.. How to Mount and Use The bottom of the tool should be clamped by a reliable vise, make sure the tool is firmly held before use. NOT suitable for use under car. The set comes with a paper graphic instruction manual.. Precautions Wear goggles and gloves before operating the tool, and stay away from others to prevent debris from popping up when turning the handle.. Package Includes Brake Line Flaring Tool Body Vise Mounted 45-degree Turntable 37-degree Turntable 4 Types of 45-degree Split Dies Blocks 3164.75mm, 146.35mm, 5168mm and 389.5mm 4 Types of 37-degree Split Dies Blocks 316, 14, 516 and 38 Long Lever Handle Instruction Manual Plastic Suitcase.. Friendly Design The split dies are equipped with a limiting hole to effectively avoid them from slipping. The handle is designed to apply force by turning it to the left, which makes it easier for right-handed use and less effort.. The tool body is made of high-quality steel. It is suitable for both amateur and professional car repair work and plumbing work..

Versatile Application This brake line flaring tool is suitable for 316 inch and 14 inch copper, aluminum, or nickel-copper pipes. It is ideal for brake and hydraulic lines and meets most vehicle requirements, but not for stainless steel pipes. Precise flaring This tool creates precise 45 SAE singledouble flare and bubble flares for secure and tight connections. Compatible with brake line specifications for American, European and Japanese vehicles. Easy to use the hand-held design makes it easy to use, even in tight areas such as under cars. It can also be used in a vice grip for more flexibility and comfort. High-quality materials The brake line crimping tool is made of high-strength carbon steel, making it durable and wear-resistant, allowing for long-term use. Set Contents Includes a flaring tool with detachable handles 316 inch and 14 inch, 2 alignment pins, 2 double-sided OP1 stamps, 1 molding lubricant, 1 hex key, and 1 blow-molded housing. Fully equipped and easy to store.

Includes dies for 316, 14, 516, 38 tubing.. Creates Single Flares, Bubble Flares, and Double Flares. Easy operation. Mounts in a vise. T-handle screw clamp securely holds die and tube. Each tool comes pre-tested from the factory and includes the sample flare from the test..

VARIOUS APPLICATIONS - The professional single flaring and swaging tool kit ATTENTION THIS IS NOT A DOUBLE FLARE TOOL is designed to create 45-degree single flares or swage in copper, aluminum, magnesium, soft steel brake lines and brass tubing NOT APPLICABLE WITH HARD MATERIAL LIKE STEEL, IRON........ PACKAGE CONTENTS - 1 flaring cone, 2 flaring bars apply to 18, 316, 14, 516, 38, 716, 12, 58 34 O.D. Tubing, 1 tube cutter range 18-1-18 3-28mm, 5 swaging adapters, 1 ratchet wrench 316, 14, 516, 38 and 1 blow-molded case for easy transportation and storage, meets all your needs.. PREMIUM MATERIAL - The flaring bar and cone is constructed from premium heat treated steel for strength and durability. The chrome swivel is made of alloy steel to reduce friction. Different sizes of sawge adapters are available for 316, 14, 38 3-in-1 , 516, 12, 58 34 O.D. brake line, air conditioning brass line, HAVC and other tubing.. USING TIPS - The special cone eccentric revolution allows the internal open gradually and accurately from 45 flare without effort, preventing tube from sliding down and keeping the flare face to be smooth, uniform without scratching. Eccentric cone will automatically rebound after finishing, let the idle top head revolve 1-2 times again and rub against the flare face to make it perfect.. 100 SALE SUPPORT -We back up all products for life, 247 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone.

Set Contents 1 316-Inch Double Flaring Tool with Removable Handle, 1 Positioning Bolt, 1 Double Ended OP1OP2 Punch, 1 Container of Die Lubricant. Creates a perfect inverted 45-Degree SAE double flare with 316-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing.. Can be used on the vehicle Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle.. Handle can be removed if you prefer to use in a bench vise.. SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 316-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..

Package Includes Specifically designed for 316 1 x 25ft 316 copper coated brake line, 1 x 3-in-1 bender, 1 x Tube Cutter, 1 x 7-in-1 flaring bar, 1 x flaring cone, 1 x 316 flaring adapter, 2 x unions, 20 fittings.. User-Friendly copper coated brake lines offer superior flexibility for effortless routing. Lightweight 3-in-1 tool adjusts 18, 316, 14 cables to perfect 180 angles. Effortless DIY brake maintenance.. 7-Size Flaring Handles single flares on 316 to 58 tubes and creates secure double flares for 316 with adapter. Effortlessly expand copperaluminumbrassmagnesium tubes . Solve bike, plumbing, refrigeration, HVAC tasks fast.. Defies Harsh Conditions Premium brass fittings with protective plating resist rustsalt corrosion. Lasts longer than standard parts in snow, rain, or muddy terrain. Essential for adventure winter-ready vehicles.. Universal Fit Engineered for hydraulic brakingfueltransmission systems. Critical in HVAC installations, auto shops, plumbing jobs, and home upgrades. Industrial-grade reliability meets DIY flexibility..

Package Includes Specifically designed for 316 1 x 25ft 316 zinc-plated brake line, 1 x 3-in-1 bender, 1 x Tube Cutter, 1 x 7-in-1 flaring bar, 1 x flaring cone, 1 x 316 flaring adapter, 2 x unions, 20 fittings.. User-Friendly Zinc-coated brake lines offer superior flexibility for effortless routing. Lightweight 3-in-1 tool adjusts 18, 316, 14 cables to perfect 180 angles. Effortless DIY brake maintenance.. 7-Size Flaring Handles single flares on 316 to 58 tubes and creates secure double flares for 316 with adapter. Effortlessly expand copperaluminumbrassmagnesium tubes . Solve bike, plumbing, refrigeration, HVAC tasks fast.. Defies Harsh Conditions Premium brass fittings with protective plating resist rustsalt corrosion. Lasts longer than standard parts in snow, rain, or muddy terrain. Essential for adventure winter-ready vehicles.. Universal Fit Engineered for hydraulic brakingfueltransmission systems. Critical in HVAC installations, auto shops, plumbing jobs, and home upgrades. Industrial-grade reliability meets DIY flexibility..

Complete Rapair Kit This 316 brake line repair kit includes a 25 ft copper-coated brake line, 16 brake line fittings, 4 threaded unions, a tube cutter, a flaring bar, a flaring cone, 5 adapters, and a toolbox for efficient brake line repair and installation. Wide Tube Compatibility Featuring a 45 cone design that precisely forms single and double flares on brake lines, transmission cooler lines, and HVAC tubing. Compatible with 12, 38, 516, 14, and 316 O.D. copper, aluminum, and thin-wall steel tubing. Long-Lasting Strength Built from hardened carbon steel, this double single brake line flaring tool maintains structural stability under repeated high-force use and helps resist deformation during demanding flaring jobs. Easy to Use Clear marks on the flaring bar enable quick, accurate pipe alignment. The top handle on the flaring cone keeps both the tool and tubing firmly in placedelivering greater control and consistent flaring results. Easy Portability Packed in a durable case that keeps components organized and easy to carry. Replace worn or damaged brake lines with our 316 brake line repair kit to help ensure optimal braking performance, keeping you safe on the road.

Tube Expanding Function This hydraulic flaring tool is equipped with a 45 flaring cone and 316 - 12 inch expanding dies and adapters, suit for GM fuel lines, GM transmission cooling lines, the brake line flare tool is able to make push connects, 45 single flares and double flares, ISO bubble flares.. Manual Hydraulic Mechanism This brake line flaring tool kit achieves pipe expansion with a hydraulic mechanism. The flaring tool is designed with exquisite details, such as a pressure relief valve and a no-leakage oil cylinder. You can easily operate this flaring tool kit without effort.. Pipe Cutting Deburring The double flaring tool kit comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 18 -58 quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of the tubing.. Durability Portability The pipe flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the hydraulic flare tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry.. Wide Application This hydraulic brake line flaring tool is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and air conditioning industry..

UPGRADED 37 AND 45 DEGREE FLARING TOOL Effortlessly create 37- and 45-degree double and bubble flares with this all-in-one kit. The upgraded design covers all standard automotive, HVAC, and hydraulic applications, allowing you to switch between SAE 45 and ANJIC 37 fittings without needing a second tool. Perfect for 304 stainless steel, steel, copper, and aluminum tubing. VERSATILE INTUITIVE Wide Tubing Compatibility with Color-Coded Operation.Engineered for versatility, this tool works on both SAE and Metric lines, accommodating 316, 14, 516, 38 as well as 4.75mm and 6mm tubing for automotive brake, fuel, and transmission applications. The die head features clear indexing for foolproof use simply start at OP.0 to clamp the tube, then follow the sequenceOP.1 for bubble flares or OP.0 OP.1 OP.2 for double flares. SUPERIOR CLAMPING DESIGN Forget the old-school screw-down clamp stylethis is a completely different experience. Simply insert the correct tubing die, lock it with the pin, snug the clamp, and set your depth using the 0 adjustment. Tighten the clamp, rotate the clearly labeled wheel to your desired flare setting, and pull the handle. Done. It's so fast and effortless it could easily handle production-line brake flaring. ALL-IN-ONE PROFESSIONAL FLARING KIT Everything You Need in One Box.This complete brake line flaring kit includes the vise-mounted flaring tool body, two rotating die heads 45 and 37, and a long lever handle for effortless operation. It comes with 4 types of 45 split die blocks 316 4.75mm, 14 6.35mm, 516 8mm, and 38 9.5mmplus an additional 6mm 45 die block for metric applications. PRO TIPS FOR PERFECT FLARES Simple Steps for Leak-Free Results. Deburr tubing inside and out to remove metal shavings. Apply anti-seize to tubing ends to prevent galling. Add a drop of oil to flaring cones OP.1 and OP.2 for smoother operation. Most importantlyalways install fittings onto tubing first, with threads facing outward, before flaring. This simple habit saves you from costly do-overs.

Single, Double Bubble FlaresThe Professional Brake Line Flare Kit is a must-have tool for anyone who works on brake lines, fuel lines, transmission lines, or other automotive tubing. It can create single, double SAE and bubble ISO flares with ease and precision. All Common Sizes are IncludedThe flaring tool has a forged steel yoke and a hardened steel flaring bar that can withstand high pressure and repeated use. Sizes of dies 316, 14, 516, 38, 716, 12, 58, 4.75mm, 6mm, 8mm, 10mm. The yoke has a T-handle that provides leverage and control when flaring the tubing. Tube Cutter and ReamerThis kit includes a tubing cutter that can cut 18 to 78 inch 3-22mmtubing, and a pipe reamer that can deburr and chamfer the tubing ends. These tools ensure a clean and smooth cut that will not leaks and improve the flare quality. Easy StorageComes in a durable case that keeps all the components organized and protected. The case has a convenient handle for easy carrying and storage. Wide ApplicationThe Professional Brake Line Flare Kit is an essential tool for mechanics, DIYers, hobbyists, and enthusiasts who want to repair or upgrade their brake systems. It can save time and money by allowing you to flare your own tubing instead of buying pre-flared ones. It can also help you customize your brake lines to fit your specific needs and preferences.

COMPREHENSIVE FLARING CAPABILITY The Hydraulic Flaring Tool Kit offers a complete solution for all your flaring needs, including 45 double flaring tools and brake repair flaring tools suitable for 316-12 lines. With 33PCS flaring dies designed for copper, steel pipe, and GM repairs, this kit covers a wide range of materials and sizes, ensuring versatility and adaptability for various projects.. PRECISION AND PROFESSIONAL RESULTS Achieve professional-grade flaring results with the Hydraulic Flaring Tool Kit. The 45 double flaring tools and sophisticated hydraulic system allow for precise and uniform flares, essential for brake line repairs, automotive maintenance, and other applications requiring high-quality flaring.. COMPREHENSIVE TOOL SET The dual flaring tool kit comes with a mini pipe cutter and deburrer to help with flaring pipes. Quickly cut pipes in the 18-58 range and clean the inside and outside of the tubing to make work more efficient... RELIABLE CONSTRUCTION Built to withstand rigorous use, the Hydraulic Flaring Tool Kit features 40 CR steel. The robust design ensures durability and longevity, providing a reliable flaring solution that can withstand the demands of frequent and heavy-duty applications.. VERSATILE APPLICATIONS Whether you are working on copper lines, steel pipes, or GM repairs, the Hydraulic Flaring Tool Kit offers versatility and compatibility with a range of materials and projects. From automotive repair shops to DIY enthusiasts, this kit is a valuable addition to any toolkit, offering the capabilities needed for various flaring tasks. Experience efficiency, precision, and reliability with the Hydraulic Flaring Tool Kit..

Creates single, double inverted SAE flares and bubble ISO flares up to 0.040 wall thickness. This is a professional tool, please read instructions before using. Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing. Includes flaring dies for all sizes 316, 14, 516, 38, 716, 12, 58, 4.75mm, 6mm, 8mm, 10mm. Self-centering premium yoke has corresponding slots to hold bar assembly tightly in place during flaring operation. Contents Include 1 SAE Forged Alloy Steel Flare Bar, 1 Metric Forged Alloy Steel Flare Bar, 1 Self Centering Premium Yoke, 13 Hardened Flare Die Heads, 1 Tubing Reamer 3mm-12mm, 1 Tubing Cutter 18 to 58 OD, 1 Rigid Plastic Storage Carrying Case.

Get a Leakproof Connection When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare makes tubing wider to brake line end for a leak-free connection without hours of hand cramping or twisting exercises. Fits Your Application 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal copper, aluminum brake lines, transmission cooler lines, and fuel lines For 316-inch 4.75mm, 14-inch 6.35mm, 516-inch 8mm, and 38-inch tubing. Use Your Vise Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field not intended for use under car 6-inch 15.2 cm T-handle screw clamp holds die and tube in place so you can create flares quickly and easily. Durability You Need Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees Each die block is 1.7 inches 4.3 cm long Approximate 1.5-inch 3.8 cm actual clamping surface we recommend only placing bends in the last 2.5 inches 6.4 cm of tube after flared. Package Contents Brake line flare kit includes 1 brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve 27.9x12.7 cm, 4 end dies, 1 instruction manual, and 1 14.1 x 6.1 x 3.5 inch 35.8x15.5x8.9 cm plastic blow-molded carrying case.