100 double ended brake fluid coolant test strips for diagnosing when to change brake fluid and engine coolant. Can be used with all coolant colors and DOT 3, 4, and 5.1 brake fluid including synthetics, low viscosity, HOAT and OAT. Finds worn out brake fluid and coolant fast. In as little as 90 seconds.. Provides visual, repeatable, scientific proof of when to change or not change brake fluid and coolant anti-freeze. The most trusted, reliable and accurate test for the condition of brake fluid and coolant.

Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service.. Gives you and your team of service advisors confidence to offer a needed brake fluid exchange.. Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety.. Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. scientific proof. The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid most vehicles use DOT 3 or 4.

15 Double-Ended test strips used to test both coolant and Brake fluid. Gives you the peace of mind that your Brake fluid is good and is safely performing its proper function. Identifies potential Brake fluid and coolant related problems before they occur -thereby ensuring your safety and fewer breakdowns. Simply remove the test strip from the foil wrapper, Dip it into your Brake fluid then coolantantifreeze, and 60 to 90 seconds later you will know the condition of your fluids. Scientific proof. May save you from paying for an un-needed Brake fluid or coolant change. Test Strip recommended by Tesla for testing Tesla brake fluid every 2 years.

BRAKE FLUID TESTING TYPE The dot 3 brake fluid tester pen can also be used for testing the fluids of DOT4, DOT5.1, ENV6 ENV4. Compatible with the most of automotive brake fluid,Very practical tool for brake fluid testing. CONVENIENT TOOL This brake fluid tester pen design is quite small size,easy to carry with.It's a very convenient tool to test the moisture of brake fluid for your auto brake. Easy to use ,simply press the button at the top, dip the probe the Testing the water content of the brake fluid dot 3, dot 4 etc.. EASY TO READYou can get results in seconds, With the percentage readings next to the LED lights on the brake fluid testing pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing.. PREMIUM QUALITY This pen brake fluid tester is made of premium nylon raw material more durable to use. 1 AAA battery needed for use, not included in the Pack. QUICK RESPONSE we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.

Brake fluid tester for DOT 3. It determines the quality of brake fluid and measures moisture from 0-4. Features LED lights to show moisture percentage. Automatically shuts off after 12 Seconds. 1.5V AAA battery included.

PROTECTS YOU YOUR CAR Check the health status of DOT3, DOT4 car brake fluid, Brake Fluid Tester Pen can be used as a digital brake fluid tester suitable for determining brake fluid quality. It will be safe for your driving. EATY TO USE Press the button , Insert the tester into reservoir for one second then the tester result will be correctly indicated by LEDs.Repress the button for power off.. 5 LEDS 5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate. USEFULL Supports DOT3 DOT4 DOT5 brake fluid .. EASY TO CARRY Small size ,you can take it in pocket , take 1 AAA 1.5V battery. automatic shutdown after about 15 seconds of inactivity.

Test the car brake fluid quality quickly to check whether its qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident. The LED indicators will show percentage of water in the brake fluid with 3 colors green yellow and red. Calibrated for cars using DOT4 and DOT3 brake fluids But DOT3 is almost replaced by DOT4 because DOT4 has better performance. Only takes seconds to know the results,very easy to use. CE and RoHS approved. Protective cap included.Takes 1 x AAA1.5V battery not included.

Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service.. Gives you and your team of service advisors confidence to offer a needed brake fluid exchange.. Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety.. Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. scientific proof. The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid most vehicles use DOT 3 or 4.

Can be used with all coolant colors, conventional coolant, long life, extended life, Dex Cool and Low Tox coolants. Easy to read 60 second visual test. Simple solution for anyone to test their coolant system. Coolant Strip earns trust by providing proof and reduces risk.

Function The new pen type brake fluid moisture tester can widely test the percentage of moisture in DOT3 DOT4 DOT5.1 ENV6 ENV4 brake fluid the results appear within a few seconds, fast and simple. Compared with similar products, it has a faster, more accurate reading capability and a wider range. Tap the top to turn on, and the green light is inserted into the water to use, simple and fast.. LED lights 5 LED lights indicate the percentage of water in the brake fluid in three colors of green, yellow, and red. From low to high, they are green 0, green-yellow 1, green-yellow-yellow 1 -2, green yellow yellow red 2-4, green yellow yellow red red 4. Easily grasp the percentage of water in the brake fluid, and consider whether to replace the brake fluid.. Convenience The brake fluid tester tool is simple and convenient. It only takes a few seconds to check the quality of car brake fluid. It is easy to operate for many new car owners. At the same time, it is a must-have vehicle tool because of its small size and easy portability. And it will automatically shut down if you don't use it within 12 seconds, saving your battery. Requires 1 x AAA1.5V battery, not included. Quality The new Brake Fluid Liquid Tester Pen is a perfect tool that we updated after many studies of similar products on the market. It reads more accurately during the test. At the same time, its shell material is made of high-quality nylon, compared to ABS materials. The product is more corrosion resistant and has a longer service life.. Operation Long press the top button to switch the type of brake fluid, the initial default is DOT3, and each time the LED from low to high turns on three times, one brake fluid is switched. If you want to use one of the brake fluids, when the LED light is in the brake fluid type gear, please release the top button when it flashes twice, and insert the bottom sensor plug into the brake fluid brake fluid test pen 23 , and you will understand percentage of water in your vehicles brake fluid.

WORK SMARTER, NOT HARDER Prevent Spills Trapped Air As You're Filling Automotive Cooling Systems.. FILL WITHOUT A SPILL As You Use the OEMTOOLS No Spill Coolant Filling Funnel Kit its the Best Made and Most Innovative Kit on the Market the Best Value for the Money. SAVE TIME MONEY by Using Fewer Tools 5 High Quality Adapters Fit Radiators or Surge Tanks on Most Domestic and Import Cars and Light Trucks Select the Correct Adapter, Attach the Funnel and Fill. ADAPTERS INCLUDED Comes with Extensions for Working with Hard-to-Reach Surge Tanks. PREVENT EXCESSIVE Cooling System Pressure Build-up as Youre Filling the Design Incorporates a Fluid Stopper with Vent. Fit Type Universal Fit.

WIDE RANGE OF APPLICATIONS The automotive brake fluid tester is a universal device for most vehicles. It can check the condition of DOT-3, DOT-4, DOT-5.1 brake fluids as well as most synthetic brake fluids. It is extremely easy for personal use and is widely used for private workshops, repair shops and car dealerships.. EASY TO USE The test procedure is fast and efficient and has a simple control panel. The backlight lights green at 0-2 data brake fluid is ready to use. At 2-3, the backlight turns yellow and the buzzer sounds slowly brake fluid needs to be changed. The backlight is red and the buzzer sounds quickly when the data is greater than 3 brake fluid needs to be changed immediately.. EASY READING high-sensitivity probe audible alarm, instant display of results, large screen with three-color backlight, easy to read the measurement results whether day or night.. FAST DETECTION the detection process is fast and efficient, the control panel is simple and easy to use. Can quickly determine whether the brake fluid needs to be replaced after the background light reminder.. EASY TO CARRY the case is well structured, compact and fits well in your hand. You can take it with you when traveling without taking up too much space..

High Quality Performance The brake fluid detector uses nickel plated metal probe, oil and oxidation resistant, not easy to corrosion. The case is matte black plastic for better skid resistance and good body texture. Metrics are accurate to 1 and results are received within seconds. Help you understand the brake fluid more clearly.. Safe Driving This product can quickly check the health condition of your car brake fluid and remind you to change the brake fluid when necessary to avoid traffic accidents, so that you are more comfortable and safer.. Easy Operation Brake fluid detector is easy to use, and small size easy to carry. Press the button, insert the test pen, it only takes a few seconds to know the result through the LED, in order to save power, this test pen has automatic shutdown function. It will automatically turn off the power after 20 seconds each time to save power.. Wide Application Range can be used in most cars. It is suitable for detecting the moisture content in DOT-3, DOT-4, DOT-5.1 brake fluid. It is very convenient for personal use and widely used in individual workshops, repair shops and dealer workshops.. Service Guarantee The brake fluid detector requires 1 LR03 AAA 1.5V battery. Our package does not include batteries, please buy batteries at local market. We offer a one-year warranty. If you cannot confirm its compatibility, or have any questions, please feel free to contact us..