WIDE APPLICATION The fuel sending unit is suitable for automobiles, ships, speedboats, engines, generator sets, engineering machinery, agricultural machinery, modified vehicles and other fields, and without limitation of environment. SENSOR MATERIAL Fule Tank Sending Unit is made of heavy duty SUS316 Stainless Steel and rugged construction.It is the Direct Replacement for Arm Type sender. The advantages of fuel level sensor are accurate measurement, long service life, good shock resistance and corrosion resistance, keep you safe. SENSOR SIGNAL Boat fuel sending unit Output signal 240-33 ohms. 240 ohms at empty, 33 ohms at full. Support 240-33 ohms Fuel Level Gauge and Water Level Gauge PLEASE choose one length range and signal you need when placing the order. MULTIPLE SIZES The length range is 150MM, 175MM, 200MM, 225MM, 250MM, 275MM, 300MM, 325MM, 350MM, 375MM, 400MM, 425MM, 450MM and 500MM. The fuel level sender comes with gasket and mounting screws. Wiring instructions are simple and easy to follow. EASY INSTALLATION The water level gauge sensor is a Standard SAE 5-hole type. Easy to install and connect. Blue wire is connected to negative-Brown wire is connected to the gauge signal output. Operational Temperature -40C -85C. Stable output signal, universal style, suitable for all kinds of material tanks.

High Precision and Long Life The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc.. Easy to Read The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read Empty-12-Full.. Easy Installation SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram.. Multi-Size Various sizes can be selected to meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment..

STANDARD OUTPUT Fuel Level Sender and Fuel Gauge are suitable for American standard output 240-33 ohms 240 ohms empty, 33 ohms full. A variety of sizes to meet the cars, boats, yachts, RVs, agricultural vehicles and industrial equipment and other different sizes of fuel tanks. NOTE The output signal of the sensor is 240-33 ohms, so the fuel gauge must be adjusted to 34 240-33 ohms to match. Please refer to Figure 2 for more information. Easy to install and connect. Fuel Sending Unit and fuel gauge with various backlight colours are equipped with gaskets, mounting screws and instructions. FUEL SENSOR Fuel Tank Sending Unit is made of 316 stainless steel, SAE 5 hole mounting pattern, NBR material gasket and controlled by high-quality reed switches. It can be corrosion resistance, no rust, stable output signal, long service life, accurate measurement, suitable for Marine applications. FUEL GAUGE With IP67 waterproof and dustproof grade, 316 Stainless Steel Bezel for long-term use even in acid-base and humid environment. Input signal Adjustable0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm Install diameter 52mm or 2-116'' Indication range EF Working voltage 9-32v dc fit 12V-24V Vehicle or Engine. MULTI-COLOUR Fuel tank gauge with 7 Color Backlight Adjustment red-yellow-orange-green-blue-purple-white, you can choose which one you want color that press the gauge back button. Connection Red9-32VDC Black Signal Input Orange Backlight Blue--Ground-.

STANDARD OUTPUT Fuel Level Sender and Fuel Gauge are suitable for American standard output 240-33 ohms 240 ohms empty, 33 ohms full. A variety of sizes to meet the cars, boats, yachts, RVs, agricultural vehicles and industrial equipment and other different sizes of fuel tanks. FUEL SENSOR Fuel Tank Sending Unit is made of 316 stainless steel, SAE 5 hole mounting pattern, NBR material gasket and controlled by high-quality reed switches. It can be corrosion resistance, no rust, stable output signal, long service life, accurate measurement, suitable for Marine applications. FUEL GAUGE With IP67 waterproof and dustproof grade, 316 Stainless Steel Bezel for long-term use even in acid-base and humid environment.Fuel Gauge Meter Install diameter 52mm or 2-116'', Indication range EF, Working voltage 9-32v dc fit 12V-24V Vehicle or Engine. MULTI-COLOUR Fuel tank gauge 7 Color Backlight Adjustment red-yellow-orange-green-blue-purple-white, you can choose which one you want color that press the gauge back button.Connection BlackGround- Red 9-32VDC Blue Signal Yellow Backlight White Adjust. PACKAGE INCLUDES Fuel Sending Unit and fuel gauge with various backlight colours are equipped with gaskets, mounting screws and instructions. Easy to install and connect. Every products needs to go through strict quality inspection before leaving the factory.If you have any questions about the product, please let us know.

Fuel Sender and Gauge KitFuel level sensor is combined with a fuel gauge, the signals of the fuel sending unit and fuel gauge have been matched. You don't need to worry about compatibility issues. They can work together seamlessly. Fuel GaugeThe Fuel Gauge diameter is 52mm or 2-116'', made of 316 Stainless Steel Bezel and Anti-fog Glass, IP67 Waterproof and Dustproof grade. You can set the back light to one of the following colors red, green, blue, white, yellow, green, purple, sky blue. Or you can enable the seven - color cycle of the backg light. American Standard OutputMH Fuel Sensor made of Heavy Duty 316 Stainless Steel with Reed Switch has a Long life, Stable Output Signal and Accurate Measurement. The Fule Level Sender and Fuel Gauge Applied for American Standard Output 240-33 ohms 240 ohms at empty, 33 ohms at full. Wide Application for Boat, Marine, Auto, Car and Truck. 316 Stainless Steel MaterialAdvantages of 316 Stainless Steel over 304 Stainless Steel 316 stainless steel contains molybdenum, making it resistance to chloride corrosion than 304. Our 316 Stainless Steel Fuel Sending Unit more suitable for tough and corrosive environments. The 304 Fuel Sender more likely to develop rust over time, compromising its structural integrity. NoteIf tank is plastic, the sensor length should be less than 1inch of tank depth, and less than 0.5inch tank depth if tank is metal. Resolution 10mm.

Fuel Sender and Gauge KitThe 240-33 ohm fuel sender and gauge compatibility, sutiable for tanks measuring 5-27 inches in height. Whether you're using it in a car, truck, boat, this sensor and gauge provides accurate and reliable fuel level monitoring for virtually any application. 240-33 ohm Fuel SenderFree Cutting to fit Fuel Tanks Min 5 - Max 27 No need to worry about tank size Simply cut the sensor to your desired length to fit your specific 5-27 inch tank height. Signal 240-33 ohms, Full -240 ohms, Empty - 33 ohm. Fuel GaugeFuel Gauge diameter is 52mm or 2-116'', made of 316 Stainless Steel Bezel and Anti-fog Glass, IP67 Waterproof and Dustproof grade. 5 signals Fuel Gauge7-Color Backlight 5 Signals Short press the back button to choose 7 color backlight long press 3s to choose 5 signals 0-90240-330-19010-180240-30 ohm. Low Fuel Warning Alert13 Fuel Warning Flash Built-in alert flashes when fuel drops below 13, suitable for AUTO, Boat, Marine or Long-haul Truck drivers. Keeping your tank levels in check. experience the convenience of precise fuel monitoring. Package IncludedIncluded 1x Fuel Sending Unit 1 Gasket, SAE 5 hole Mounting Pattern, 5 Mounting Screws 1 x Fuel Gauge, 1x illustrated instructions. Easy to install.

STANDARD OUTPUT--Fuel Level Sender and Fuel Gauge 240-33 ohms 240 ohms empty, 33 ohms full American standard output. Multiple sizes fit fuel tanks of cars, boats, yachts, RVs, agricultural vehicles, industrial equipment and more.. FUEL SENSOR--Fuel Tank Sending Unit features 316 stainless steel construction, SAE 5-hole mounting pattern, NBR material gasket, and high-quality reed switch control. It offers corrosion resistance, rust prevention, stable signal output, long service life, and accurate measurement ideal for marine applications.. FUEL GAUGE--IP67 waterproof and dustproof rating with a 316 stainless steel bezel, ensuring durability even in acidic, alkaline, and humid environments. Fuel Gauge Meter Installation diameter 52mm 2-116'', indication range EF, working voltage 9-32V DC compatible with 12V-24V vehicles or engines.. MULTI-COLOR--The fuel tank gauge features 7 adjustable backlight colors red, yellow, orange, green, blue, purple, and white. Simply press the gauges back button to select your preferred color. Wiring BlackGround - Red 9-32VDC Blue Signal Yellow Backlight White Adjust.. EASY TO INSTALL--SAE 5-hole mounting pattern for simple installation and hookup. Clear, illustrated instructions are straightforward and easy to follow. Note Prevent the sensor from hitting the tank bottom the sender length should be 1 25mm shorter than the fuel tank depth. All necessary accessories are included no additional parts needed. Package contents 1x Fuel Gauge, 1x Boat Fuel Sensor, 1x Gasket, 5x Screws, and 1x Instructions..

Excellent Fit This fuel sender gasket kit complete with fine course replacement screws and washers. Our fuel tank sender gasket has 5 holes for electric and mechanical fuel sending units. Durable Construction The boat fuel sending unit gasket is made from high-quality Silicone and stainless steel materials, anti-vibration, durable for long service life and providing a reliable seal for your fuel tanks and water tanks. Enhanced Performance Designed for top mounting in aluminum, plastic or stainless steel fuel tank. With our Fuel Sender Gasket Kit, you can prevent tank leaks and ensure optimal performance of your fuel system. Easy to Use Installing these marine fuel sensor gasket kits is easy, whether you are replacing old gaskets or performing routine maintenance, this tank sending unit gasket kit offers a hassle-free installation process. Versatile Application Ideal for marine use, these fuel sending unit gaskets are suitable, It can perfectly match the original gasket hole, making them essential accessories for your boating needs.

Wide Application Marine fuel sending unit is widely used in car, RV, boat, motorcycle, tractor, generator, yachts, etc, suitable for fuel level gauges and water level gauges with no impurities in liquids such as diesel and gasoline, and the output signal is stable. High Quality Material Boat fuel tank sending unit is made of high-quality 316 stainless steel material, with stable performance, firm structure, durability, safe and reliable quality, you can use it with confidence. Excellent Performance Length 6.5 Inch165mm, water level sensor is only suitable for 0-90 ohms fuel gauge, boat fuel gauge sending unit can output a good signal, and the optimal operating temperature is -40 -85 . Easy to Install We have prepared the screws and washers required for your installation, and you only need to install according to the instructions, the wiring is simple and clear, making fuel tank sending unit installation very simple and convenient. Package Contain 1 x Fuel Tank Sending Unit, 5 x M5 Screws, 1 x 2mm Thick Washer, 1 x Installation Instructions, easy to install and use, if you have any problems during installation or use, we will provide technical support.

Fits for Volkswagen Beetle 1968-1978, for Karmann Ghia 1973-1974, for Thing 1973-1974. Replaces part number 113919049D. Package Contents 1x Fuel Tank Gauge Sending Unit With Seal Screws. Please check the pictures and your car model are correct before purchasing.

Wide range of use Fuel gas sender unit are not affected by the environment, can be widely applied to automobiles, ships, speedboats, engines, generator sets, and even construction machinery, agricultural machinery, modified vehicles and other fields. Better Alternative Fuel tank level sending unit compared with other level sensors, this level sensor has a unique doughnut float design that makes the reed switch outstanding in terms of durability and reliability. It ensures a longer service life due to the absence of fragile moving parts. In addition, the sensor does not require any tank adjustments, making it simpler and more convenient to use. Size 6150mm, and marine fuel sending unit 6 are made of 316 stainless steel metal, shockproof, drop-proof, more rugged, longer working life. Output Signal The Marine Fuel Dispenser outputs 240-33 ohms, 240 at no load and 33 at full load. Easy to install Gas fuel level gauge comes with installation instructions for easy installation from -40C to 85C, positive pole is reddish brown wire, negative pole is blue wire and can be installed in just 15 minutes.

Product Parameters Fuel sending device has high measurement accuracy, more sensitive and accurate than others, the oilwater level sensor outputs 0-90 ohms 0 ohms empty, 90 ohms full, operating temperature -40-85. Reliable and Durable made of high-quality stainless steel, the internal use of high-quality reed switch control, oil resistance, temperature resistance, corrosion resistance, not easy to rust, long-term immersion in the fuel can also maintain stable performance. Wide Application Marine fuel sending device is widely used in cars, RVs, boats, motorcycles, tractors, generators, yachts, etc. It is suitable for fuel level gauges, water level gauges and any liquid that does not contain impurities. Simple Installation the ground blue wire of the transmitter is connected to the common ground connection, and the signal brown wire of the transmitter is connected to the meter connection, the meter has a color coded connection, please maintain this code when connecting the transmitter and ground wire. Packing List 1 x fuel sending device, 1 x NBR gasket, 5 x M5 screws, 1 x installation instruction,If you encounter any problems during installation, we will provide technical support.

Compatible Models The fuel gauge sending device and fuel gauge are fit for different sizes of fuel tanks in automobiles, ships, yachts, RVs, agricultural vehicles, and industrial equipment, with multiple sizes to choose from. High Precision The marine diesel fuel tank sending unit able to accurately indicate fuel level without being controlled by wave swaying. High quality Materials The Fuel gauge sending unit and fuel gauge kit are made of high-quality stainless steel on the outside and controlled by high-quality reed switches on the inside, which are durable, have good wear resistance and corrosion resistance, are not prone to rusting and aging, and have a longer service life. Easy to Read The fuel level gauge comes in 8 adjustable backlight colors, with a stainless steel frame, anti fog curved glass, and an IP67 waterproof rating, making it easier to read. Empty 12-Full. The wiring harness has been connected to the meter and comes with a rubber plug to enhance the waterproof effect. Packaging and Installation 1 x fuel sending unit, 1 x NBR gas, 5 x M5 screws, 1 x fuel level gauge, 1 x wiring harness, 1 x installation instructions. The SAE 5-hole installation method allows for direct installation. The gasket has good sealing performance and high oil resistance, saving you time and money.

Accurate 24033 Ohm Output Standard 240-33 ohms range ensures seamless compatibility with most marine and automotive fuel gauges. Provides stable and accurate readings from empty 240 to full 33. 8 200mm probe fits tanks 8.3-8.9 deep with 21mm resolution. Clear Easy-to-Read Gauge Equipped with a clear white dial that accurately displays the E to F scale. Built-in 7-color LED backlight red, yellow, orange, green, blue, purple, white and a curved anti-fog glass design ensure clear readability day and night. Durable Stainless Steel Build Made of steel with a high-quality float, have excellent corrosion resistance and high temperature resistance, designed to withstand fuel, saltwater, and high temperatures, ensures long-lasting performance even in harsh environments. Easy Installation Seal Design Includes 1 gasket, 5 mounting screws, and wiring diagram for quick installation. Top-mount design ensures a tight, secure fit to prevent leaks. Ideal for DIY replacement or upgrade. Wide Application Perfect for boats, trucks, RVs, generators, buses, and industrial equipment. 8 sender designed for fuel tanks up to 200mm deep, making it a versatile solution for fuel level monitoring.

WIDE APPLICATION The fuel sending unit is suitable for automobiles, ships, speedboats, engines, generator sets, engineering machinery, agricultural machinery, modified vehicles and other fields, and without limitation of environment. SENSOR MATERIAL Fule Tank Sending Unit is made of heavy duty SUS316 Stainless Steel and rugged construction.It is the Direct Replacement for Arm Type sender. The advantages of fuel level sensor are accurate measurement, long service life, good shock resistance and corrosion resistance, keep you safe. SENSOR SIGNAL Boat fuel sending unit Output signal 240-33 ohms. 240 ohms at empty, 33 ohms at full. Support 240-33 ohms Fuel Level Gauge and Water Level Gauge PLEASE choose one length range and signal you need when placing the order. MULTIPLE SIZES The length range is 150MM, 175MM, 200MM, 225MM, 250MM, 275MM, 300MM, 325MM, 350MM, 375MM, 400MM, 425MM, 450MM and 500MM. The fuel level sender comes with gasket and mounting screws. Wiring instructions are simple and easy to follow. EASY INSTALLATION The water level gauge sensor is a Standard SAE 5-hole type. Easy to install and connect. Blue wire is connected to negative-Brown wire is connected to the gauge signal output. Operational Temperature -40C -85C. Stable output signal, universal style, suitable for all kinds of material tanks.

SIGNAL OUTPUT Standard American Output, 240 ohm - 30 ohm Empty - Full, Non-Linear Output, 18-21mm Per Step. MOUNTING METHOD SAE 5 Hole Mounting Pattern NOT equidistant . OPERATING 12V24V, -40 F to 185 F -40 C to 85 C.. INCLUDED Sending Unit 1 pc, NBR Mounting Gasket 1 pc, 10-24 Hex Screws 5 pcs, Installation Instruction 1 pc. FOR USE IN Diesel, Fuel, Gasoline, Water, OEM Replacement.

Endurance Property Utilizes a unique switch that provides good durability and reliability than traditional arm sensors, ensuring long-term stable fuel and water level monitoring. Wide Applicability Suitable for marine, automotive, truck and RV applications, supporting fuel and water level gauges to meet different needs. Accurate Measurement Provides 240-33 ohm U.S. standard outputs 240 ohm empty, 33 ohm full to ensure accurate fuel and water level readings, helping you to keep track of fluid levels in real time. Waterproof Design The sensor is waterproof and suitable for marine and other environments, ensuring reliable operation in a wide range of conditions. Easy to Install The sensor is designed to be plug-and-play and requires no additional calibration, so you can install and use it directly, saving time and effort.

Accurate Fuel Monitoring This fuel sending unit and gauge kit features a 15 inch380mm fuel level sender with 240-33 ohm output 240 empty, 33 full and a 2 inch52mm fuel gauge. Designed for precise fuel level monitoring, this system delivers 21mm accuracy for reliable performance across various applications. Multi-Color Backlight Gauge The included 52mm fuel gauge supports 8 adjustable backlight colors and operates on 9-32V, offering clear visibility in all lighting conditions. Durable Stainless Steel Construction Made with premium stainless steel, the fuel level sending unit resists corrosion and rust for long-term reliability. Inside, a high-quality reed switch ensures stable signal output and consistent fuel level readings. Complete Fuel Gauge Kit Includes everything needed for installation 1x fuel sending unit, 1x gasket, 5x mounting screws, and 1x fuel gauge with wiring. Versatile Applications This universal fuel sending unit and gauge kit is suitable for fuel tanks, water tanks. Ideal for marine boats, automobiles, trucks, RVs, and industrial vehicles.

Accurate Indication The advanced reed switch technology ensures that the fuel level readings remain stable and precise, even in challenging conditions such as rough waters and boat rocking. Versatile Options Designed to cater to different tank sizes, this sending unit offers multiple length and resolution options. Whether you have a short or tall fuel tank, the unit's customizable features ensure that it meets your needs. Non-Linear Output With a signal output range of 240-33 ohms, this sending unit adheres to the SAE 5-hole mounting pattern, making it compatible with existing fuel gauge systems, providing a more accurate representation. Robust Design Engineered to withstand the unique challenges of marine environments, this fuel sending unit is suitable for both gasoline and diesel applications. Its design minimizes the impact of constant movement and environmental factors. User-Friendly Installation This boat fuel sending unit comes with a complete installation kit, including a mounting gasket, five metric screws, and clear installation instructions. The straightforward design makes it easy for you to install.

Product Parameters Fuel sending device has high measurement accuracy, more sensitive and accurate than others, the oilwater level sensor outputs 0-90 ohms 0 ohms empty, 90 ohms full, recommended fuel tank size 11.8in-12.4in 300-315mm, operating temperature -40-85. Reliable and Durable made of high-quality stainless steel, the internal use of high-quality reed switch control, oil resistance, temperature resistance, corrosion resistance, not easy to rust, long-term immersion in the fuel can also maintain stable performance. Wide Application Marine fuel sending device is widely used in cars, RVs, boats, motorcycles, tractors, generators, yachts, etc. It is suitable for fuel level gauges, water level gauges and any liquid that does not contain impurities. Simple Installation the ground blue wire of the transmitter is connected to the common ground connection, and the signal brown wire of the transmitter is connected to the meter connection, the meter has a color coded connection, please maintain this code when connecting the transmitter and ground wire. Packing List 1 x fuel sending device, 1 x NBR gasket, 5 x M5 screws, 1 x installation instruction,If you encounter any problems during installation, we will provide technical support.

Wide Application-This boat fuel sending unit is widely used in automobiles, recreational vehicles, ships, etc., and is suitable for oil level gauges and water level gauges of liquids such as diesel and gasoline without impurities. High Precision-The marine diesel fuel tank sending unit is equipped with high-precision sensors, which can be controlled by wave swinging, have stable output signals and accurate measurements. High Quality-The boat fuel sender unit is made of high-quality 316 stainless steel, which is durable, has good wear resistance and corrosion resistance, is not prone to rust and aging, and has a longer service life. Install Easily- The marine fuel sending unit adopts the SAE 5-hole installation method, with NBR material gaskets and m55 screws. The wiring is simple and clear, making the installation of the intelligent fuel tank instrument very simple and convenient. Package Contain-1 x Water Tank Gauge Sensor, 5 x M5 Screws, 1 x 2mm Thick Washer.If you have any questions about size selection or quality, please feel free to contact us..

Wide Application The marine fuel sending unit is widely used in automobiles, RVs, ships, motorcycles, tractors, generators, or yachts, etc, it is suitable for fuel level gauges and water level gauges with no impurities in liquids such as diesel and gasoline, and the output signal is stable. IP67 Waterproof Boat gas tank gauge sensor with super strong IP67 grade waterproof ability, excellent sealing performance, can effectively prevent water and dust from entering the interior, and protect water level sensor. Reliable and Durable Fuel sending unit kit is made of premium 316 heavy-duty stainless steel, sturdy and durable, oxidation resistance, rust resistance, corrosion resistance, longer service life than ordinary materials, safe and reliable quality, you can use it with confidence. Measurement Accuracy Stable SignalLength 10 Inch250mm, The boat gas tank gauge sensor is only suitable for 0-90 ohms fuel gauge, it can output a good signal, fast and accurate measurement of fuel level, very practical and convenient, optimal operating temperature is -40 -85 . Easy to Install 1 x Water Tank Gauge Sensor, 5 x M5 Screws, 1 x 2mm Thick Washer, SAE 5 hole, the wiring is simple and clear, easy to install and use, If you have any problems during installation or use, we will provide technical support.

Direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure. Durable construction - this part is made from quality materials to ensure reliable performance and long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool. Please check the Amazon Confirmed Fit bar at the top of this page before buying product to ensure this product works for your vehicle. If the Amazon Confirmed Fit bar has an i in a blue circle, this product has additional notes. Please hover over the i on the bar to see notes before making your purchase..

SUPERIOR QUALITY 9225mm Fule Tank Sending Unit is Made SUS316 Stainless Steel and is a Standard SAE 5-hole type.It is the Direct Replacement for Arm Type sender. The advantages of fuel level sensor are accurate measurement, long service life, good shock resistance and corrosion resistance,keep you safe. WIDE APPLICATION 240-33ohm Water tank sender is suitable for automobiles, ships, speedboats, engines, generator sets, engineering machinery, agricultural machinery, modified vehicles and other fields, and without limitation of environment. MULTIPLE SIZES The length range is 150MM, 175MM, 200MM, 225MM, etc.Output signal 240-33ohm.240 ohms at empty, 33 ohms at full.Support 240-33ohm Fuel Level Gauge and Water Level Gauge Please choose one length range signal you need when placing the order. EASY INSTALLATION The water level gauge sensor is a Standard SAE 5-hole type, Easy to install and connect.Blue wire is connected to ground -, Brown wire is connected to the gauge signal wire.Operational Temperature -40C -85C. Stable output signal, universal style, suitable for all kinds of material tanks. PACKAGE INCLUDES 1X Fuel sending unit, Comes with 2mm thick gasket and 5 pieces of M5 mounting screws. Every products needs to go through strict quality inspection before leaving the factory, if you have any questions about the product, please let us know.

bGreat replacement fuel senderbThe advantage of This doughnut float design type level sender over thick-film swim arm type level Sender is bthe reed switch's durability and reliability. bbr Additionally, no moving parts to break. No adjustment needed for tank. It could support fuel level gauge and water Tank Gauge for BoatRVTruck.br. bAODITECK Fuel Gauge b You can purchase b an AODITECK fuel level gauge in conjunction with an AODITECK sending unit b If your boatcamper didnt have a fuel gauge, Both Will Work Great Together. br b There are several series gauge models at option.b br. bFiner resolutionbAs the Short Tanks requires higher sensitivity than the taller tanks Do. br b AODITECK Resolution of 6 Fuel Sending Unit is10mm.bbr Others Resolution of 6 Fuel Sending Unit of some companies they offered is 21mm.. bMore Reliable and Quality ConstructionbAll the AODITECK Fuel Sending Units are made With series of bHighquality reed switches and fixed resistors.b SAE 5 hole mounting pattern, heavy duty SUS 316 stainless steel and rugged construction. Signal Output 240 ohms-33 ohms.br. bEasy to Install, Easy Hookup b The AODITECK Fuel Level sending unit comes with gasket,mounting screws,well-written and illustrated instructions The wiring instructions are straight forward and easy to follow. Takes about 15 minutes to install total, getting your fuel gauge working again.br. bNoteb to allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal . brThe Diameter of Float is 1.3835mm. If You Have to Drill the hole, Diameter 1-1238mm Hole Would be Perfect.brAODITECK Sender is with Non-Linear Output, It can only match with standard gauge with Non-Linear signal. br.

Great marine fuel sending unit replacement for broken boat fuel sending unit in marine boat fuel tank.. Read accurately fuel gas gauge display the water gas fuel level information in boat marine RV car truck tank, no need worry about how much the water gas fuel left.. Flexible adjustable The marine fuel sender unit is easy to cut depending on tank depth, swings flexibly in tight spaces in the correct direction by loosening the center screw to rotate and re-tighten OR cut on demand.. Heavy quality boat fuel sending unit Brass top fitting 304 stainless steel screws aluminum alloy base for corrosion resistant and durable. Wide application The boat fuel tank sender unit is great for 6 to 12 inch depth boat fuel tankmarine fuel tankmarine truck car gas tank tractor diesel tanktruck water tank. Compatible with 33 to 240 ohm marine boat RV car truck dash gauges.. Easy to Install First,check the tank depth to make sure correct length for accurate reading.Then cutadjust the marine fuel tank sender unit length into the tank. Finally wiring to the gauge on the dash.

Wide Compatibility This fuel tank sending unit gasket fits plastic or metal fuel tanks in boats, marine vessels, trucks, and RVs, offering a universal replacement for fuel sender applications. Reliable Seal Each fuel sending unit gasket is crafted to provide a tight, leak-proof seal that prevents fuel leaks, ensuring safe and efficient performance of your fuel system. Durable NBR Material Made of high-quality nitrile rubber, this fuel sending unit gasket is wear-resistant, heat-resistant, and designed to withstand harsh marine and automotive conditions. Easy Installation This 2-pack fuel tank sending unit gasket kit includes 2 gasketsNBR and 5 stainless steel M5 screws. Align with the fuel tank sender hole, tighten the screws, and complete setup in minutes. Enhanced Performance By replacing old gaskets with our fuel sending unit gasket, you improve sealing, reduce fuel loss, and extend the service life of your fuel tanks and sending units.

Fitment Universal suit for trucks, rv, buses and boats etc.. Output Signal 240 ohms-33 ohms. Pros Made of good quality material, reliable quality, and durable material. Standard SAE 5 hole pattern for easy installation.. Function This sensor is used to monitor the oil level by continuously measuring the engine oil level in the static and dynamic ranges. The sensor is designed for vertical installation from below in the bottom of the oil pan. Inside the housing there are the level sensor, temperature sensor, and sensor electronics.. Package 1x Fuel Tank Sending Unit. Please confirm your car model and OE number before purchasing. Please check relevant operation video when you replace it..

? The fuel sending unit is made of high-quality 316 stainless steel material which is not easily damaged, durable and intends for long service life.It also has anti-vibration, anti-explosion funtion,keep you safe.. ? The length range is 100MM, 125MM, 150MM, 175MM, 200MM, 225MM, 250MM, 275MM,300MM, 325MM, 350MM, 375MM, 400MM, 425MM, 450MM, 475MM and 500MM. The Signal output is 0-190ohm or 230-33ohm. We have multiple sizes for your choosing, there is always one that can suit you and satisfy you.. The water level gauge sensor is standard SAE 5 hole pattern, easy to install and hookup, connection blue wire to ground-, connect brown wire to instrument signal wire.. The fuel level sender has a wide range of applications, it is suitable for fuel, water, kerosene, chemical tanks and any kinds of liquids without impurities and it is suitable for trucks, buses and boats, etc,and without limitation of environment.. Boat fuel sending unit only has one year factory warranty. Your satisfaction is our great motivation, if you have any questions before purchase or after purchase, please feel free to contact us, we will give you a satisfied solution within 24 hours..

Package Content1 Set Fuel Sending Unit and Gauge.. FunctionalityThe maritime gasoline sender unit can be easily severed, depending on the depth of the tank. It is capable of flexible movement in confined areas, in the correct direction, by loosening the central screw for rotation and subsequently tightening it again. Alternatively, it can be cut as needed.. AdvantageFuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generatorsgenerator sets, and marine field.. Installation StepsTo ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge.. AttributeThe FuelWater Level Sensor with standard output of 240-33 Ohm..

Direct replacement - this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Restores functionality - reliable replacement for an original part that has failed due to internal sensor failure. Durable construction - this part is made from quality materials to ensure reliable performance and long service life. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience. Cost-effective - has similar performance to part that originally came on vehicle, but is priced far below getting replacement from dealership. Ohms Empty 240.Ohms Full 33.

ApplicabilityFuel sending unit gasket is suitable for top installation of plastic or metal fuel tanks on all types of ships, trucks, and RVs, and fuel tank sending unit gasket is suitable for all types of ship fuel transmitter devices. Size of Fuel Sending Unit GasketSending unit gasket 2.56 ''outer diameter, 1.57 ''inner diameter, 0.08 ''thickness, fuel sending unit gasket is fit boat fuel sending unit, also for moeller marine fuel tank sending unit, electric fuel tank sending unit, choose appropriate fuel sending unit gasket replacement. Strong SealingThe sending unit gasket is made of thick rubber with strong viscosity, which can tightly fit with the transmission device. The boat fuel sending unit gasket can effectively prevent leakage. High Quality MaterialsThe fuel sending unit gasket is made of nitrile rubber, which is a wear-resistant and high-temperature resistant thick rubber designed for harsh weather conditions, allowing the boat fuel sending unit gasket to be used for a long time. Easy to InstallBoat fuel tank sending unit gasket is easy to install and comes with installation accessories. Align the fuel tank gasket with the fuel sending unit hole, tighten the screws, and complete the installation of the fuel tank sending unit gasket with simple operation.

The Fule Tank Sending Unit with American standard output 240-33 ohms 240 ohms at empty, 33 ohms at full.. Wide Application The Fule Tank Sending Unit is suitable for Boat, Auto,Trucks, Buses and for Marine. It Could Support Fuel Level Gauge and Water Level Gauge for BoatAuto.. High Quality Material Fuel tank sending unit is made with heavy duty 316 stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No Adjustment Needed for Tank.. High Quality Material Fuel tank sending unit is made with heavy duty 316 stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal. No Adjustment Needed for Tank.. Easy to Install The fuel level sending unit is equipped with gaskets, installation screws, and good written and illustrated instructions..

HIGH PRECISION AND LONG LIFEThe fuel gauge sender is made of 361L stainless steel, and the fuel sending is controlled by high-quality reed switches. The Fuel Tank sender is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement.. EASY TO READThe fuel level gauge has several adjustable backlight colors, and the red back lighting is bright enough at night. The fuel gauge sender Digital is easy to read for you.. EASY TO INSTALLSAE 5 hole mounting pattern, easy to install and hookup. The well-written and illustrated instructions are straight forward that will easy to follow.. MULTI-SIZEVarious sizes can be selected to meet different sizes of the fuel tanks sender for boat, Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment.. PACKAGE INCLUDEDThe Fuel Tank Sender comes with 1 x Fuel Level Tank Gauge, 1 x Fuel Water Level Sensor, 1 x Manual, 1 x Gasket, 5 x Fixing Screws.

Superior Performance Our fuel tank sending unit has an advantage over thick film swim arm level sensors in the durability and reliability of a reed switch, no part damage, and no tank adjustments required. Durable Material The fuel sending unit is made of heavy duty 316 stainless steel, which is reliable and durable, anti-vibration, explosion-proof, can read data accurately, and can maintain excellent performance in various environments. Wide Range of Application The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges. Simple Installation The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative. Please Note In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should be 1inch less than the depth of the tank.

Wonfly Stainless Steel Fule Tank Sending Unit Made With OKI Reed Switch. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.. Easy to install hookup SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation. Takes about 15 minutes to install total, getting the fuel gage working again.. SAE 5 hole mounting pattern Heavy duty 316 stainless steel and rugged construction. Signal Output 240 ohms-33 ohms. Wide Application It Could Support Fuel Level Gauge and Water Level Gauge for BoatAuto.. Multi-Size Various sizes can be selected to meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment.. Service If you Need Lengths Others, Please Contact us Directly for More Information. For allow the sender not hit the bottom of the tank, the length of sender should be 1 less than the depth of the tank if tank is plastic, and 0.5 less than the depth of the tank if tank is metal ..

Universal Fit Suitable for most trucks, RVs, generatorsgen sets, buses, and marine boats, etc.. Feature Widely application, steady output signal, corrosion resistance, anti-vibration, anti-explosion, durable. Product Characteristics Made of good stainless steel material, it's anti-corrosion for fuel, gas, diesel, and water level gauge diagnoses.. How to Install Direct replace and install without special tools, convenient to use.. What You Get 1pc Fuel Level Sender, 1pc Gasket, 1pc Installation Guide, 5 Pcs Screws.

Measuring Performance Utilizing reed switch technology, this unit provides a stable output signal and accurate fuel level readings. Whether it's gasoline, diesel or water, you can rely on its accuracy. Simple User Interface Equipped with an intuitive display, you can easily check the fuel status without the need for complex operations, making it suitable for all user groups and enhancing the user experience. Fast Response Time The device features a fast response time that accurately reflects fuel level changes in a short period of time, helping users to keep track of fuel status and avoid unplanned downtime. Application Suitable for a variety of applications including automobiles, boats, yachts, RVs, agricultural vehicles and industrial equipment. This versatility makes it an ideal solution for those who need to reliably monitor fuel levels in a variety of vehicles. Simple Installation Designed for easy installation, the device utilizes a 5-hole mounting pattern, making the installation process simple and efficient, saving time and effort.

FITMENT Various sizes can be selected to meet different sizes of fuel tanks for 12V Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment.. FEATURES This Fuel Gauge kit Manufactured with quality metal and plastic for durability under various driving conditions. Easy to read, Precise gauge readings with extremely smooth needle movement.. FUNCTION Reliable replacement for an original part that has failed due to internal sensor failure.. EASY INTALLATION 5 hole mounting pattern, good sealing performance, high oil resistance, easy and quick installation by referring to the wiring diagram.. FREE RETURNS AND WARRANTY We accept free return and replacement if it is not the correct one. And guarantee with one year limited warranty.

Read accurately fuel gas gauge display the water gas fuel level information in boat marine RV car truck tank, no need worry about how much the water gas fuel left.. Heavy quality boat fuel sending unit Brass top fitting 304 stainless steel screws aluminum alloy base for corrosion resistant and durable. High sensitivity and easy operation4-24 Inch 10-60cm Adjustable. Resistance Specifications Empty - 240 ohms, Full - 33 ohms.. Applicable to all fuel level gauges of sincotech, and All other brands gauges of equipment ranging from 33-240 ohms including cars, boat, trucks, tractor, RVs, etc..

Used to measure the fuel level of automobile.. High sensitivity and easy operation.. Inside diameter of the screen43mm 1.7 Outside diameter of the screen56mm 2.2. Suitable for most 12V gasoline vehicles. Package list1 x Fuel Level Gauge ,1 x Fuel Level Transmitter ,1 x Oil float, 1 x Rubber pad, 1 x Bolts Pack.

Fit forRead accurately the fuel gas gauge displays the water gas fuel level information in the boat marine RV car truck tank, no need to worry about how much water gas fuel is left.. Product InformationThe maritime gasoline sender unit can be easily severed, depending on the depth of the tank. It is capable of flexible movement in confined areas, in the correct direction, by loosening the central screw for rotation and subsequently tightening it again. Alternatively, it can be cut as needed.. DetailsThe FuelWater Level Sensor with standard output of 0-190 ohm.. How to useTo ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge.. TipAlong with the tank's adjacent wall or baffle, there must be a minimum of one inch 25 mm of space between the float retaining collar and the tank bottom..

Complete Accessories The package includes tank level gauge, gasket and mounting screws, users do not need to purchase additional accessories, providing one-stop solution, convenient for users to quickly configure and use. Simple and Easy Installation The water level sensor adopts the standard SAE 5-hole mounting mode, the manual can be easily installed and connected, saving time and effort, suitable for users of all skill levels. Performance The sensor is 6 inches 150mm in length, designed for 0-90 ohm fuel gauges 0 ohms at empty, 90 ohms at full, provides a stable signal output, and operates over a temperature range of -40C to 85C to ensure proper functioning even under extreme conditions. Endurance Property Made of robust 316 stainless steel, it has good high temperature and corrosion resistance, ensuring stable operation in a variety of harsh environments. This endurance makes the product perform well in long-term use, reducing replacement frequency and installation time. Wide Applicability The fuel sending unit is suitable for a variety of application scenarios, including boats, cars, RVs and motorcycle etc. It is capable of measuring unadulterated liquids such as diesel fuel, gasoline and water, which can satisfy the needs of different users.

Standard Sizes U.S. Standard 240-33 Ohms 240 Ohms at no load, 33 Ohms at full load, Sender Size 5130mm,Recommendation Tank Size 5.5-6.1 140-155mm, Resolution 10mm. Precise Measurement Never worry about whether your fuel tank has enough fuel again Our fuel send unit utilizes high-precision technology to ensure you're always informed about your fuel level, eliminating the guesswork and hassle. Easily Handle Installation Don't worry about the hassle of installation We provide wiring installation diagrams on the picture, with a standard five-hole mounting design. Simply align the notch arrow with the position of the wires, and you can complete the installation in minutes. We also provide washers and screws, saving you all the trouble. Versatile Compatibility Whether you're on a boat, a truck, a car, an RV, or a tractor, our sensors are perfectly compatible. Whether it's a voyage at sea or an adventure on land, fuel levels are always at your fingertips. Durable and Long-lasting Made of marine grade 316 stainless steel, boat fuel tank sending unit has excellent corrosion resistance, high temperature resistance, high strength, can withstand higher operating temperatures, can withstand greater pressure and stress, ensuring long-term stable operation of the sensor, saving money your money.

More Accurate Measurements 10mm precision fuel sending unit can measure fuel level at smaller intervals and can provide fuel level data more accurately than a 21mm sensor. It is very important for ship owners who need to accurately control fuel consumption, plan and manage fuel consumption more effectively and save on fuel costs. More Stable Measurement Compared with traditional lever-type sensors, the boat fuel sending unit has better performance, it will not be disturbed by continuous movements such as waves and hull rocking, and can stably and accurately indicate the fuel level, even in windy and wave conditions. , there will be no jump in the fuel gauge, ensuring reliable fuel measurement. Long Service Life Fuel sending unit is made of heavy duty 316 stainless steel, which is reliable and durable, corrosion resistant, not easy to rust, anti-vibration, explosion-proof, can read data accurately, and can maintain excellent performance in various environments. Simple Installation The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total. Signal Output 240 ohms-33 ohms. Wide Range of Application The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges.

bA Direct Replacement Sending Unitb Sucicago Reed Switch Diesel Fuel Water Level Sensor is a Better Option Than the Traditional Lever Type Sensors. The Boat Fuel Tank Will not Effected by The Constant Movement Caused by Waves and Boat Rocking. b It Will give an Accurate Indication of Fuel Level and the Fuel Gauge No Longer Bounces All Over The Place In Windy Wave Situations.b br. bUpdate VersionbWe Received Feedback From Customers Who Saidb the Smaller Sending Units As A Short Tank Requires Higher Sensitivity Than The Taller Tanks Do. bOur RD Has Redesigned br b10mm Resolution Range 4,5,6,7b br b21mm Resolution Range 8,9,10,11,12,13b br. bEasily Understood Wiring InstructionsbThis Sucicago Fuel Sender Comes With 1pc of NBR Mounting Gasket, 5pcs of Metric Screw and Installation Instruction. Install It With Ease You will know how much Fuel, Diesel,Gasoline or Water left on Your boatTruckCamper Signal Output 240-33ohms, Non-Linear Output, SAE 5 Hole Mounting Pattern NOT Equidistant br. bBody Materialb Stainless Steel. Sucicago Guarantees with 1 Year Limited Warranty Free Lifetime Technical Support.. bReally Important to Know BEFORE You Orderbbr1 To Allow The Sender not Hit The Bottom of The Tank, The Length of Sender Should be 1 less Than The Depth of The Tank If Tank Is Plastic, And 0.5 Less Than The Depth of The Tank If Tank is Metal . br2The Diameter of Float is 1.3835mm. If You Have to Drill the hole, Diameter 1.5038mm Hole Would be Perfect..

High Performance Provides smoother readings in rough water with minimal slosh fluctuation. No moving parts to break.. Reliable Fuel Level Readings Output 090 ohms empty at 0 ohms, full at 90 ohms.. RuggedCorrosion Made with robust materials, it is durable and suitable for various environments. Although the initial investment is slightly higher, it is more economical in the long run.. Easy Installation Direct Replacement , Plug and play.. Widely Applicaiton Compatible with 0-90ohms RV Truck Yacht SUV Boat etc..

Provides accurate fuel level information. Suitable Tank Depth 6 to 12 inches. Can be used for gas or diesel. Compatible with 35 to 240 ohm gauges. Includes mounting screws and gasket. Manufacturer part number 50-15461.

Provides accurate fuel level information. Suitable Tank Depth 6 to 27 inch. Compatible with 35 to 240 ohm gauges. Can be used for gas or diesel. Includes mounting screws and gasket. Manufacturer part number 50-15421.

Reliably monitors fuel levels to provide fuel gauge sold separately with the most accurate readings. Compatible with 33 full and 240 empty ohm gauges. No moving mechanical parts, which optimizes durability and reliability. Features a Stainless Steel immersion tube, corrosion-resistant plated mounting flange, gasket SAE 5 hole, and .250-inch insulated spade connectors. Manufacturer part number 50-15541.

Fuel level sender. For use with Bosch fuel level gauges and 5 - 26 deep tanks. Includes gasket and mounting hardware. Resistance specifications Empty - 240 ohms 12 - 130 ohms Full - 33 ohms.

b100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed SwitchImported from Japan. It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. b br Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.br. The FuleWater Level Sensor with American standard output 240-33 ohms 240 ohms at empty, 33 ohms at full. If you Need Lengths Other than 4-24, Please Contact us Directly for More Information.br. Easy to Install The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions The Wiring Instructions are Straight Forward and Easy to follow. br. bSAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. b bWide Application It Could Support Fuel Level Gauge and Water Level Gauge for BoatAuto.bbr. b 100Tech Guarantees with 1 Year Limited Warranty Free Lifetime Technical Support brbAttention To Allow the Fule Sender not Hit the Bottom of the Tank, Please Measure from the Top of Your Tank to the Bottom on the Outside and Subtract 1 Inch the Length of Sender.b br. The Size of Float The Diameter of Float is b1.3835mm.b If You Have to Drill the hole, Diameter b1.5038mmb Hole Would be Perfect..

bA Fine Replacement Sending Unitb Sucicago Reed Switch Diesel Fuel Level Sender is a Better Option Than the Traditional Lever Type Sensors. The Boat Fuel Tank Will not Effected by The Constant Movement Caused by Waves and Boat Rocking. It Will give an Accurate Indication of Fuel Level and the Fuel Gauge No Longer Bounces All Over The Place In Windy Wave Situations. br. bUpdate VersionbWe Received Feedback From Customers Who Saidb the Smaller Sending Units As A Short Tank Requires Higher Sensitivity Than The Taller Tanks Do. bOur RD Has Redesigned br b10mm Resolution Range 4,5,6,7b br b21mm Resolution Range 8,9,10,11,12,13b br. bEasily Understood Wiring InstructionsbThis Fuel Level Sender Unit Comes With 1pc of NBR Mounting Gasket, 5pcs of Metric Screw and Installation Instruction. Install It With Ease You will know how much Fuel, Diesel,Gasoline or Water left on Your boatTruckCamper Signal Output 0-190 ohms, Non-Linear Output, SAE 5 Hole Mounting Pattern NOT Equidistant br. bBody Materialb Stainless Steel. Sucicago Guarantees with 1 Year Limited Warranty Free Lifetime Technical Support.. bReally Important to Know BEFORE You Orderbbr1 To Allow The Sender not Hit The Bottom of The Tank, The Length of Sender Should be 1 less Than The Depth of The Tank If Tank Is Plastic, And 0.5 Less Than The Depth of The Tank If Tank is Metal . br2The Diameter of Float is 1.3835mm. If You Have to Drill the hole, Diameter 1.5038mm Hole Would be Perfect..

Fuel tank sending unit is made with heavy duty 316 stainless steel. This water level sensor is reed switch, durability and reliability, steady output signal.. Marine Fuel Sending Unit Mounting Methods Standard SAE 5 hole pattern .. The FuleWater Level Gauge Sensor with American standard output 240-33 ohms 240 ohms at empty, 33 ohms at full.. Gas Tank Sending Unit Length range 200MM 250MM 300MM 350MM 450MM . Output signal 0-190ohm or 230-33ohm Please choose one length range signal you need when placing the order .. The fuel level sender is suitable for Boat, Auto,Trucks, Buses and Marine field. Fit for Fuel Level Gauge,Water Level Gauge and any kinds of liquids without impurities..

High Precision and Long Life The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc.. Easy to Read The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read Empty-12-Full.. Easy Installation SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram.. Multi-Size Various sizes can be selected to meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment..

Attention - The length of the entire probe rod is 250mm 10inch, so we recommendotion tank size is 10.2260mmup to 10.8275mm. Please check the length you need when purchasing to avoid being too long and unusable. The pole length needs to be at least 0.2inches shorter than the barrel, as reserved. For example, the height of liquid barrel is 10.5 inches, then you need to choose about 10 inches of rod length.. THALASSA 10-inch 250mm Liquid Level Sensor - Features US-spec 240-33 ohms resistance and 316 stainless steel construction, ensuring seamless compatibility with our marine instruments such as fuel gauges. Rated power 125mW. Accuracy 21mm.. Universal Liquid Level Sensors The 250mm sensor is primarily installed on boats, trucks, and off-road machinery. Liquid level measurement is achieved through a series of reed switches within an electronic tube. The float is the sensor's only moving component, thereby minimizing potential mechanical failures. Protection Rating IP67 Operating Temperature -40C to 85C These features collectively contribute to the sensor's precise liquid level measurement.. Mounting Methods - Standard SAE 5 hole pattern. Please choose one length range signal you need when placing the order.. Widely used - Suitable for fuel, water, kerosene, chemical tanks and any kinds of liquids without impurities..

b100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed SwitchImported from Japan. It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. b br Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.br. The FuleWater Level Sensor with American standard output 240-33 ohms 240 ohms at empty, 33 ohms at full. If you Need Lengths Other than 4-32, Please Contact us Directly for More Information.br. Easy to Install The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions The Wiring Instructions are Straight Forward and Easy to follow. br. bSAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. b bWide Application It Could Support Fuel Level Gauge and Water Level Gauge for BoatAuto.bbr. The Size of Float The Diameter of Float is b1.3835mm.b If You Have to Drill the hole, Diameter b1.5038mmb Hole Would be Perfect..

bA Fine Replacement Fuel Guageb The Needle is Smooth Sweeping and Surpasses the Original Version in the Boatthe Needle doesn't Bounce all over the Place as the Boat is Underway or in Rough Sea Conditions.br. bAdjustable and Wide Applicationb100TECH Boat Fuel Gauge is Designed to Measure Display the Amount of gas or Fuel in Your Boat or Vehicle's Gas Tank. Signal Input 0-190ohm, 240-33ohm, 240-30ohm, 0-180ohm, 10-180ohm.br. bEasy to install and Calibrateb Install diameter 52mm or 2-116'', Indication range EF, Working voltage 9-32v dc fit 12V-24V Vehicle or Engine The instruction is Easybr to Follow.. b8 Color Adjustment Cycle Modesb Includes RedDefault, Green, Blue, White, Yellow, Yellow Green, Orange, Purple Allow You to Match Your Factory Dashboard Lights or Add a Custom Style to the Interior of Your Vehicle.br. bBody MaterialIP67 waterproof and Dustproof grade,316 Stainless Steel Bezelb100TECH Guarantees with 1 Year Limited Warranty Free Lifetime Technical Support. bNote bbr b1The Default Setting of This Fuel Level Gauge is 240-33ohm. bbr b2This 100TECH Fuel Gauge Can Only Work With The Level Sender With The Corresponding Resistive Output 240-33ohm 0-190ohm 240-30ohm 0-180ohm 10-180ohm . The Resistance Range Can Be Adjusted By Simply Pressing A Button.bbr b3This Boat Fuel Gauge Can Not Work With the Fuel Sending Unit with Output Signal0-30ohm, 0-90ohm,73-10 ohm etc.bbr.

Vehicle Fitment - Compatible for most trucks, RVs, generators, buses, tractors,and marine boats, yachts etc.. Reliable and Durable - 240-33 ohms Boat Fule Tank Sending Unit is made of heavy duty SUS316 Stainless Steel and rugged construction, oxidation resistance, rust resistance, corrosion resistance, longer service life than ordinary materials, with super strong IP67 grade waterproof ability, excellent sealing performance.. Measurement Accuracy - 15 Inch380mm. Output signal 240-33ohm 240 ohms at empty, 33 ohms at full. Support 24033 ohm Fuel Level Gauge and Water Level Gauge. It can output a good signal, fast and accurate measurement of fuel level, very practical and convenient.. EASY INSTALLATION - The Boat Fule Tank Sending Unit is a Standard SAE 5-hole type. Easy to install and connect. Operational Temperature -40C -85C. Easy to install with simple tools in just minutes.No special tools are required for installation.. Purchase with assurance - 365 Days of Unrestricted Mileage GuaranteeWe work hard to give you a positive shopping experience because we genuinely care about your satisfaction. Please don't hesitate to contact us with any more questions..

Two-Pack Replacement KitThe package includes two pieces of the fuel tank sending unit gasket. This two-pack provides a convenient solution for maintenance needs or for having a spare fuel pump gasket and boat gas tank cap gasket on hand. Durable NBR Material for LongevityThis fuel tank sending unit gasket kitnbr utilizes nitrile rubber, a wear and heat-resistant gas gasket material. This composition offers excellent oil resistance, making the fuel sending unit gasket suitable for automotive and marine conditions. Reliable Leak Prevention Strong SealCrafted as a robust gasket tank seal, this unit effectively prevents fuel leaks. The fuel gasket material creates a tight, lasting barrier, ensuring secure performance for the fuel pump sending unit gasket and fuel tank sender gasket. Wide Compatibility This fuel tank sending unit gasket fits plastic or metal fuel tanks in boats, marine vessels, trucks, and RVs, offering a universal replacement for fuel sender applications. Simplified Installation ProcessInstallation is straightforward. The design aids in fuel pump alignment installation gauge installation, allowing for quick setup. The fuel pump gasket and boat gas tank cap gasket can be positioned and secured efficiently, restoring system function.

Wide Applications The fuel level sensor supports fuel level gauge and water level gauge. Suitable for fuel, water tanks and any kinds of liquids without impurities and use for marine, truck, cars and boats, etc.. Material The fuel level sending unit is made of heavy duty 316 stainless steel, anti-vibration, anti-explosion funtion, durable for long service life.. Length Range 220MM 225MM 250MM 275MM. Output signal is 24033ohm. Resolution range is 21mm. The plastic fuel tank chooses this kit to be 1 smaller than the fuel tank depth, and the metal fuel tank chooses this kit to be 0.5 smaller than the fuel tank depth.. Install Methods The water level gauge sensor is standard SAE 5 hole pattern. Red-brown wire for positive and blue for negative. Easy to install and connect.. Package Include 1x level sensor, 5 x M5 mounting screws, 1x 2mm NBR gasket and wiring installation instructions. Order now and get hassle-free return and money back policy, buy with confidence Any questions about our product, please contact us by email..

Smooth Reading Design based on magnetic technology eliminates the need for a floating arm and dramatically reduces reading fluctuations caused by shaking. Reliable switches and fixed resistors ensure accurate indication of fuel level. Multiple Meter Compatibility The transmitter's non-linear output design allows it to be compatible with standard meters and adapt to different types of fuel and water level measurement needs, increasing flexibility of use. Adjustable Backlight Provide 8 optional backlight colors, clearly visible during the day and brighter at night, able to match with the vehicle instrument lights to enhance the personalized style of the interior and visual effect. IP67 Waterproof Rating IP67 rated to ensure reliable operation in a variety of environments, suitable for a wide range of applications such as boats, trucks and RV's, increasing the durability of the unit. Simplified Electrical Connection Equipped with quick connect terminals to simplify the electrical connection process, you can easily complete the installation, reducing the reliance on specialized skills.

Fuel Sender Material Fuel sending unit is made with heavy duty stainless steel. This fuel tank sending unit of advantage is reed switch, durability and reliability, steady output signal. No adjustment needed for tank, accurately Indicating fuel level of the Tank. The fuel level sensor is suitable for Boat, Auto,Trucks, Buses and Marine field. American Standard Output The fuel gauge is combined with the fuel sending unit to make it easier to work on the vehicle and avoid signal mismatches. The FuleWater level sensor suitable to American standard output 240-33 ohms 240 ohms at empty, 33 ohms at full. Length range of fuel tank sender to choose 5 inch-18inch. Fuel GaugeThe fuel gauge is made of 316 Stainless Steel Bezel, IP67 waterproof, dustproof curved glass lenses. Diameter 2-116 inch 52mm, Working voltage 12-24V. 7 color backlight redgreenblueyellowolivineorangepurple. Easy to view from all angles when driving at night or any lighting condition. Easy to Install The package includes all accessories, no need other accessories. The package comes with 1x Fuel Gauge, 1 x Boat Fuel Sensor, 1 x Gasket, 5 x Screws and 1 x instructions. SAE 5 hole mounting pattern, easy to install and hookup. The well-written and illustrated instructions are straight forward that will easy to follow. Noted Avoid the sensor to hit the bottom of the tank, the length of the sender should be 125mm less than the depth of the fuel tank.

b100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed SwitchImported from Japan. It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. b br Additionally, No Moving Parts to Break. No Adjustment Needed for Tank.br. The FuleWater Level Sensor with American standard output 240-33 ohms 240 ohms at empty, 33 ohms at full. If you Need Lengths Other than 4-32, Please Contact us Directly for More Information.br. Easy to Install The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions The Wiring Instructions are Straight Forward and Easy to follow. br. bSAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. b bWide Application It Could Support Fuel Level Gauge and Water Level Gauge for BoatAuto.bbr. b 100Tech Guarantees with 1 Year Limited Warranty Free Lifetime Technical Support brbAttention To Allow the Fule Sender not Hit the Bottom of the Tank, Please Measure from the Top of Your Tank to the Bottom on the Outside and Subtract 1 Inch the Length of Sender.b br. The Size of Float The Diameter of Float is b1.3835mm.b If You Have to Drill the hole, Diameter b1.5038mmb Hole Would be Perfect..

SENSOR MATERIAL 240-33 ohms Boat Fule Tank Sending Unit is Made SUS316 Stainless Steel and is a Standard SAE 5-hole type.It is the Direct Replacement for Arm Type sender. The advantages of fuel level sensor are accurate measurement, long service life, good shock resistance and corrosion resistance,keep you safe. MULTIPLE SIZES The length range is 150MM, 225MM, 250MM, 275MM, 300MM, 350MM, 400MM, 500MM etc. Output signal 240-33ohm.240 ohms at empty, 33 ohms at full.Support 24033 ohm Fuel Level Gauge and Water Level Gauge .Please choose one length range signal you need when placing the order. WIDE APPLICATION Marine Water tank sender is suitable for automobiles, ships, speedboats, engines, generator sets, engineering machinery, agricultural machinery, modified vehicles and other fields, and without limitation of environment. EASY INSTALLATION Operational Temperature -40C -85C.Positivered wire, negativeblue wire.Stable output signal, universal style, suitable for all kinds of material tanks.Easy to install and connect, getting the fuel gage working again. PACKAGE INCLUDES 1X 6150mm Fuel Level Sending Unit.Comes with Gasket, Mounting Screws.Wiring instructions are simple and easy to follow.

Product CharacteristicsFuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generatorsgenerator sets, and marine field.. ApplicationThe maritime gasoline sender unit can be easily severed, depending on the depth of the tank. It is capable of flexible movement in confined areas, in the correct direction, by loosening the central screw for rotation and subsequently tightening it again. Alternatively, it can be cut as needed... Material SpecificationApplying the principle of the magnetic field to control the reed on-off switch, featuring strong corrosion resistance, long using life, anti-vibration, anti-explosion, etc.. Easy To InstallTo ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge.. Package Contains1 Set Fuel Sending Unit and Gauge..

Suitable forRead accurately the fuel gas gauge displays the water gas fuel level information in the boat marine RV car truck tank, no need to worry about how much water gas fuel is left.. Package List1 Set Fuel Sending Unit and Gauge.. MaterialApplying the principle of the magnetic field to control the reed on-off switch, featuring strong corrosion resistance, long using life, anti-vibration, anti-explosion, etc.. Product CharacteristicsFuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generatorsgenerator sets, and marine field.. Easy InstallationTo ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge..

Wide ApplicationThis universal fuel sending unit boasts a simple yet effective structure, making it ideal for diverse applications. It accurately reads fuel, water, or other impurity-free liquid levels in cars, boats, speedboats, engines, generators, construction machinery, agricultural equipment, and modified vehicles. This reliable fuel level sending unit serves as a perfect tank fuel sending unit replacement for various setups.. US Standard OutputEngineered to the US standard 240-33 ohm output 240 empty, 33 full, this fuel sender unit works seamlessly with compatible 240-33 ohm fuel or water gauges. It's available in multiple sizes to match different tank depths.Please verify your tank's depth and your gauge's output parameters before purchase to ensure this universal fuel sending unit is the correct fuel tank sending unit for your system.. Materials Construction Built for longevity, the sensor body is made of corrosion-resistant stainless steel. The float is crafted from lightweight, wear-resistant NBR plastic for smooth operation. This robust fuel sending unit offers superior durability and reliability compared to thick-film swing arm types, thanks to its reed switch mechanism. It serves as a direct, drop-in fuel sender replacement for many arm-style senders.. Easy InstallationInstallation is straightforward with the included complete kit fuel sensor, gasket, mounting screws, and user manual. Featuring a standard SAE 5-bolt hole pattern, this dual-wire fuel level sending unit is easy to connect the blue wire to negative and the brown wire to the gauge signal output.. Installation NotesFor correct function, ensure the sender does not hit the tank bottom. Measure from the tank's top to its internal bottom and subtract 1 inch from the sender's length. The resistor's rated power is only 18 W. Never exceed this during operation. Following these steps will ensure the accurate and safe operation of your new fuel sending unit..

Great marine fuel tank sending unit replacement for broken marine fuel sending unit in marine boat fuel tank.. Read accurately fuel gas gauge display the water gas fuel level information in boat marine RV car truck tank, no need worry about how much the water gas fuel left.. Flexible adjustable The marine fuel sender unit is easy to cut depending on tank depth, swings flexibly in tight spaces in the correct direction by loosening the center screw to rotate and re-tighten OR cut on demand.. Heavy quality boat fuel sending unit Brass top fitting 304 stainless steel screws aluminum alloy base for corrosion resistant and durable. Wide application The boat fuel tank sender unit is great for 4 to 28 inch depth boat fuel tankmarine fuel tankmarine diesel tankmarine water tank. Compatible with 33 to 240 ohm marine boat dash mounted gauges.. Easy to Install First,check the tank depth to make sure correct length for accurate reading. Then cutadjust the marine fuel tank sender unit length into the tank. Finally wiring to the gauge on the dash..

Package Content1 Set Fuel Sending Unit and Gauge.. FunctionalityThe maritime gasoline sender unit can be easily severed, depending on the depth of the tank. It is capable of flexible movement in confined areas, in the correct direction, by loosening the central screw for rotation and subsequently tightening it again. Alternatively, it can be cut as needed.. AdvantageFuel-sending units for boat tanks are widely used in fuel, water, kerosene, and chemical tanks, generatorsgenerator sets, and marine field.. Installation StepsTo ensure an accurate reading, first check the tank depth to make sure the length is proper. The marine gasoline tank sender unit length should then be shortened or adjusted into the tank. At last, connecting to the dashboard gauge.. AttributeThe FuelWater Level Sensor with standard output of 240-33 Ohm..

High Precision and Long Life The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc.. Easy to Read The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read Empty-12-Full.. Easy Installation SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram.. Multi-Size Various sizes can be selected to meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment..

Voltage 12V Flow Rate 750 GPH Outlet Diameter 34 19mm. Embrace worry-free boating with the Seaflo 750GPH Automatic Submersible Boat Bilge Water Pump. This all-in-one pump and float switch combo eliminates the need for an additional float switch, making it a convenient and efficient choice for marine applications.. Automatic Operation The pump activates when the water level rises and automatically shuts off once the water is removed. No manual intervention required, ensuring peace of mind during your marine adventures.. Automatic Operation The pump activates when the water level rises and automatically shuts off once the water is removed. No manual intervention required, ensuring peace of mind during your marine adventures.The float switch's hollow design enables seamless functionality. When the water level rises above 2 50 mm, the pump activates, and it deactivates when the water level drops to 34 20 mm above the strainer's bottom surface.. Oil-Resistance This pump is designed to handle straight motor oil without activating, keeping your bilge free from unwanted pumping due to oil presence.. Easy Maintenance The snap-off strainer facilitates effortless cleaning, ensuring optimal pump performance. Keep your bilge pump in top condition with minimal effort.. 4 Year Warranty. User-Friendly Installation Connect the brown-white wire to the positive terminal and the black wire to the negative - terminal for automatic functionality. The 18 AWG, 1m long leads offer flexibility in installation.. Current Details Operates at 2.48A with a maximum amp of 5A, ensuring efficient and reliable performance..

Superior Performance Our fuel tank sending unit has an advantage over thick film swim arm level sensors in the durability and reliability of a reed switch, no part damage, and no tank adjustments required. Durable Material The fuel sending unit is made of heavy duty 316 stainless steel, which is reliable and durable, anti-vibration, explosion-proof, can read data accurately, and can maintain excellent performance in various environments. Wide Range of Application The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges. Simple Installation The package comes with mounting screws, washers and instructions, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative. Please Note In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should be 1inch less than the depth of the tank.

Calibrated to the Industry Standard of 33-240 Ohms. Requires connection to a dash mounted gauge. Internal components will not rust or corrode. Complete with 5 hole gasket and screws.