Sockets hold bows to create arch support for boat cover. Durable chrome plated zinc construction. Overall Size 3-14 inch x 58 inch. Opening dimensions 1-78 inchx 716 inch. Accommodates 38 inch battens up to 1-34 inch. Manufacturer part number 50-78011.

Tear-resistant and UV resistant The higher the D value, the thicker the yarn and the thicker the fabric is 900D is way heavier canvas than 600D 420D 300D Double stitching, bow is double reinforced, and won't tear easily at the sharp elbows Anti-UV ability increased by 40, avoid aging, disintegration and tearing due to exposure to the sun. 100 Waterproof 900D Marine Grade Polyester Canvas waterproof PU coating anti-UV coating, can withstand up to 4000pa Water pressure Additional, Inner Waterproof tape at seams Prevents Water leaking Please use SUPPORT POLE beneath the cover, avoid water accumulate. Snug Fit and Breathable Heavy duty elastic cord sew in around hemline for secure and snug fit It also has two vents in the back which allow air to pass through. And the vents are covered to keep water out. Upgraded Trailerable and towing The Boat cover comes with more 116 pcs tie-down straps and buckles than the competition to secure the cover to the trailer more securely. Easy towing and avoid tearing on the way, integrated buckle and adjusable strap tightening system provides easy installation and quick release. Please email us for any problemscover rips, tears. Center Console Boat Covers please refer to Tuszom Boat Cover Size Measurements to find the right size for your boatStorage Bag Include.

Middle Reinforced FabricMade of high-strength 1200D polyester in the middle and 600D polyester in both ends, this boat cover provides better water resistance performance than pure 600D fabric boat cover with the waterproof PU coating and anti-UV coating, protecting your boats from scratch, dust, rain, snow, and UV rays. Fits 17'-19' Long Boat and Beam Width up to 96 inches.. Windproof Custom-fit Compared with other boat cover, our thicken 1200D fabric in the middle decrease the possibility of tearing on the windshield part by wind. 11 pcs adjustable tie-down straps with quick-released buckles keep the boat cover firmly in place to avoid being blown away. All-around bottom elastic hem ensures a 360 degree custom-fit for your boat.. Additional Reinforcements3 corners at the bow and stern are double reinforced with 600D polyester fabric to reduce tearing at the typical wear points. All seams are triple fold and double stitched for better durability. Plus, BAR-TACK stitches on the strap help snap the straps in place better, reducing the possibility of wearing straps.. Moisture Control Quick-drying Both sides of the tail are equipped with an air vent to prevent water vapor from collecting under the cover, keeping the boat dry and prolong product life. Tip you can also buy a support rod to prevent water accumulation.. Package SupportEach kits arrive ready to install and includes boat cover1, straps11, storage bag1. We provide 24 months customer support. If you have any question while in use, please contact us. Notice Do not store or roll up boat cover while wet. Be sure to clean and dry before storage. Please measure your boat before your purchase..

ELIMINATES WATER POOLING- If you own a boat and store it outdoors you know how brutal the elements can be on a cover. This Boat Cover Support Pole System eliminates all areas that could possibly sag and collect water, prevent water from pooling, ponding, pocketing. It helps extend the life of your boat.. EASY TO SETUP AND VERY STURDY-This support Pole system includes a 56 foot long strap with a hook at each end , and two bucks for quick release and length adjustment a height adjustable aluminum telescoping boat cover support pole a triangle plate goes on top of the pole for strap threading a round base goes on the bottom of the pole as stand. PS. This pole is compatible with Vico Marine Boat Vent Cap 2.. SELF STAND and HEIGHT ADJUSTABLE-The Support Pole is self-standing with big support plate on the bottom. The height is adjustable from 23 to 56.5. You will find this boat cover support kit strap and pole system makes your boat covering significantly easier, and help prevent your boat cover from ripping and collapsing. Pontoon boat will need two systems for utmost support.. FITS MOST BOAT ON MARKET- Fit boat up to 25 feet in length. Accommodate pole to take care of all low sagging spots in boat cover and make sure the straps stay tight. Rain, snow, hail, water will flow off of the boat. Normally extend the pole up approx. 3 to 5 over the windshield height. For the utmost protection, you can add more adjust poles at the low spots. iCOVER sells adjustable aluminum telescoping Boat Cover Support Pole separately.. WARRANTY- At iCOVER, We offer 12 months warranty. Any request will be responsed within 24 hours, please contact us if you have any questions..

UNIVERSAL FITMENT Supports outboard motor brands such as Yamaha, Mercury, Suzuki, Evinrude, Honda, and Tohatsu. Specific Fitment range for outboards with 3-RAM hydraulic tilttrim systems See Fitment Guide. The intended goal is to support and brace the outboard motor when trailering to prevent unwanted moment or momentum on tilttrim unit and transom. The rubber pipe acts like a shock absorber.. EASY TO USE No drilling or special installation required, no need to bend over or get on your knees. Minimize metal to skeg scrapping and rust compared to traditional metal transom saver. Simply tilt engine up, insert high pressure TS-Pipe into tilttrim piston, then trim down and you are done. No metal, no worries of rust or corrosion and is safe to use in both salt and freshwater applications. No need for straps, rope, bungies, bolts or brackets. All you need is the high pressure TS-Pipe.. UPGRADED DESIGN HIGH PRESSURE SYSTEM High Density EPDM rubber formula. Trial tested and constructed better by Mangrove Products. Our mold enables versatility for larger outboard motor class compression. Wider diameter base for more surface area coverage to minimize movement, extended length to allow higher skeg ground clearance, recessed entry hold to clear piston seal, Double Walled ABS liner, bonded ABS octagon mold, and injected glow in the dark liner.. SIMPLIFY BOATING Make your life easier and more enjoyable by eliminating the worry of potential damage to your outboard motor or transom when trailering your boat to your favorite fishing spot or family boating day. Spend less time at the boat ramp with fast use and easy storage. The TS-Pipe can reduce strain to transom when hitting bumps on roadway. NOTE Compression will flex the rubber wedge which is a normal process.. FITMENT GUIDE Yamaha 4-Stroke F2501 Pipe and F300-F4502 Pipe VMAX-SHO Not Applicable, Mercury ProXSSea ProFour Stroke 175-250 hp 1 Pipe 300hp 2 Pipe, Verado V8 and V6 Not Applicable, Mercury Racing 250R1 Pipe, Suzuki DFSS 140-250hp 1 Pipe and DF 300-350hp 2 Pipe, Tohatsu MFSBFT 75-250 hp 1 Pipe, Honda BF 75-250 hp 1 Pipe, Evinrude E-Tech HO1st Gen 140-250 hp and HO1st GEN 300 hp 2 Pipe. 3-RAM System required for correct fitment..

??? ?. Our support pole is SPECIFICALLY DESIGNED to lift your boat cover from the inside. It efficiently sheds rain, snow, and debris, preventing damaging pools of water that can strain seams, cause mold, or even collapse onto your boat's finish. No more worrying about a sagging, stressed cover.. - . Built to withstand seasons of outdoor abuse, this pole features a rust-proof, steel core 1.13 diameter 1.2mm thick that won't bend under heavy snow loads. Unlike flimsy alternatives, it reliably holds your cover taut through storms and winter weather, ensuring continuous protection for your boat.. . The upgraded 9-inch ABS base provides exceptional stability, with larger footprint preventing tipping in strong winds. In addition, 2 10m UV-resistant PE ropes trimmable to desired length and one 5-inch large mushroom cap ensure reliable pole stabilization, keeping it upright even in harsh winter winds or during cover installation.. , . Achieve the ideal height adjustable from 20 to 50 in seconds with the telescoping designno adding or removing sections. Simply extend, lock, and position it under your cover. This effortless adjustability guarantees a custom, snug fit for bass boats, pontoons, jon boats, and more, without any trouble.. ? - . Includes a storage bag for neat, compact off-season storage of all components. We offer 24-hour professional after-sales service to make sure all your inquiries, issues, and requests are promptly responded to and resolved..

Adjustable Height Customize the height of the support pole from 12 to 44 to fit various boat cover sizes and maintain proper support to prevent water pooling and debris build-up. Complete Kit Each kit includes heavy-webbing straps, a large plastic base, and telescoping aluminum poles, offering everything needed for effective support and stability. Purposeful Design Specifically engineered to support boat covers, this system helps prevent water and debris accumulation, keeping your cover and boat in excellent condition. Universal Fit Designed to work with most boat covers, this support system is suitable for boats up to 28 feet in length, providing versatile support for various boat sizes. Extends Cover Life By preventing sagging and maintaining proper tension, this support system helps extend the lifespan of your boat cover, reducing the need for frequent replacements.

American Flag Themed Design Adorned with a stylish American Pride pattern, perfect for anyone looking to add a personalized touch to their pontoon boat.. Universal Seat Coverage Designed to fit most pontoon boat seats, these covers offer protection from UV rays, moisture, and general wear, extending the life of your upholstery.. Superior Material Quality Our Boat Seat Covers Made from superior microfiber, renowned for its quick-drying properties, these covers keep your seats dry and comfortable.. Simple Installation System Equipped with adjustable straps and quick-release buckles for a secure fit, ensuring the covers stay in place even in windy conditions.. Maintenance Convenience Fully machine washable, making it easy to remove dirt and grime, these seat covers are designed for the practical boat owner..

PROTECT YOUR BOAT COVER If you have a boat and store it outdoors you will need our support poles. The boat cover support system can support where the boat cover sags and collapses. Prevent rain and snow from accumulating and damaging your boat cover, allowing rainwater to seep into your boat and corrode your boat. ADJUSTABLE HEIGHT FOR EASY INSTALLATION Our pontoon cover support pole is telescoping which can adjust to any custom height from 23 to 57 to fit your boat perfectly. You just twist and lock the height you need which can support boat covers and tarps made of canvas, plastic, etc.The boat prop cover is very easy to install.. REINFORCED RUST-PROOF ALUMINUM TUBE This body of the boat cover support poles system is made of aluminum, which can be rust-proof,non-corrosive, durable, strong enough and won't bend or break. The reinforced aluminum tube is thicker than other products on the market, with a diameter of 1 inch, can withstand more than 300 pounds of pressure, and the linked part is reinforced to not easily slip off. It's designed to last through the countless night with your boat cover.. REINFORCED RUST-PROOF ALUMINUM TUBE This body of the boat cover support poles system is made of aluminum, which can be rust-proof,non-corrosive, durable, strong enough and won't bend or break. The reinforced aluminum tube is thicker than other products on the market, with a diameter of 1 inch, can withstand more than 300 pounds of pressure, and the linked part is reinforced to not easily slip off. It's designed to last through the countless night with your boat cover.. EASY TO INSTALL This boat accessories-support pole is made up of aluminum poles, a mushroom cap, and a large base. According to the installation instructions, you only need 10s to complete the installation, very simple. The boat pole cover fits most boats on market. Note the extra-large pontoon boat needs two support poles..

Comprehensive Set our package includes a 20 - 22ft waterproof boat cover with 13 adjustable straps1 boat cover support pole system consisting of 9 ABS base, 1 top cap, 3 straps, and 5 stainless steel tubes This all in one solution meets all your needs for boat cover protection and support. 5 Adjustable Heights Support Pole System boat cover support pole system is effortlessly extend and retract, offering adjustable positioning from 13 to 66 This ensures a snug fit of the cover over the boat, effectively preventing water accumulation. Durable Material the boat cover is crafted from 210D silver coated Oxford fabric Not only waterproof but also highly wear - resistant, It which can withstand up to 300 pound pressure,can withstand the rigors of daily use and harsh weather, protecting your boat from rain, snow, and UV rays. Effective Protection the boat cover accessories is designed to be wind and waterproof It can effectively shield your boat from strong winds, preventing the cover from being blown away The stainless steel support pole combined with the straps, keeps the cover taut, preventing water from pooling on the surface. Wide Compatibility The pontoon boat accessories set is suitable for a wide range of boat types, including Tri - hull, V - hull, Runabout, Fish Ski Boat, and Bass Boat. It is designed to fit 20 - 22ft boats precisely, providing a customized protection solution.

Made of 600D polyester canvas with double PU Coating,Marine grade. 1 inch anti-rust and strong Aluminum Frame. Contains Two rear support pole and one storage boot. Sizes available6 inch L x 46 inch H x 54 inch -60 inch W 6 inch L x 46 inch H x 61 inch -66 inch W 6 inch L x 46 inch H x 67 inch -72 inch W 6 inch L x 46 inch H x 73 inch -78 inch W 6 inch L x 46 inch H x 79 inch -84 inch W 6 inch L x 46 inch H x 85 inch -90 inch W..

Complete 2-Pack Boat Cover Support System This boat cover pole kit includes 2PCS stainless steel support poles, 2 upgraded 15-LB boat cover water bags, and 1 portable storage bag for easy organization. Designed to prevent water pooling and sagging, this boat cover support system keeps your cover tight, clean, and in optimal shape, regardless of the weather.. 5-Stage Adjustable Height Design Each support pole features five telescoping sections, extending to 15 inches, 28 inches, 41 inches, 54 inches, and 63 inches. This adjustable height provides more options than standard models. Ideal for V-shaped hulls, flat-bottom boats, pontoon boat covers, and canvas canopies, this telescoping boat cover support rod fits various boat sizes and cover types with precision and stability.. Heavy-Duty Stainless Steel Construction Made of sturdy stainless steel, this heavy-duty support pole offers exceptional strength and rust resistance. With a load-bearing capacity exceeding 300 lbs, it outperforms aluminum poles, making it the most durable option for marine cover support poles or boat cover reinforcement poles. Ideal for long-term use in both saltwater and freshwater environments as boat accessories.. 9-Inch ABS Stable Base Straps Our ABS stable base support pole now features an expanded 9-inch diameter upgraded from the standard 7, ensuring stronger friction and better stability on deck surfaces. Comes with boat cover straps and pre-installed fasteners for easy setup. This cover pole with straps keeps your boat cover upright and steady, even under heavy rain or wind.. Multipurpose Easy to Use This boat cover support pole works as a boat tarp support pole, boat cover tent pole, or cover support system for boats, eliminating water pooling and extending the cover's lifespan. Its ideal for boat cover support poles for sailboats, pontoon boats, Jon boats, and even outdoor furniture covers or grill coversa truly universal support pole for boat covers and beyond..

PREMIUM SUPPORT POLE Crafted from heat-treated, anodized aluminum with a ribbed profile for exceptional strength and lightweight durability. Holds up to 120 lbs over twice the capacity of standard poles. Spline tip locks securely into the Boat Vent 2.. CAM LOCK DESIGN Patented flip-lock mechanism allows fast, secure height adjustment from 39 to 70. Easily set the perfect tension to maintain your boat covers shape and protection.. VENTED COVER PROTECTION Includes the Boat Vent 2 for improved air circulation beneath your cover. Helps minimize trapped humidity and heat buildup, keeping your boat interior fresh and dry.. NON-MARRING RUBBER BASE Equipped with a fully synthetic grey TPR rubber crutch tip designed to grip securely without scuffing or marking your deck or flooring surfaces.. USA MADE QUALITY Proudly engineered and manufactured in Wisconsin by Vico Marine, a division of Vico Plastics. Built to withstand sun, rain, and outdoor exposure for long-lasting reliability..

Easy to Install Versatile Quick and easy installation with no special tools required. The simplest way to vent and tent your boat cover, helping to reduce moisture buildup and maintain proper airflow. Compatible with custom and semi-custom marine covers and support poles sold separately.. Durable Weather-Resistant Built to withstand the elements, including harsh sun exposure, saltwater conditions, and extreme weather. Made with the latest UV-inhibited polymers, provides superior protection against snow loads and heavy rain compared to sewn-in vents, preventing poles from ripping or tearing the cover.. Superior Ventilation Protection Effectively vents warm, moist air from enclosed spaces while providing extra support when combined with a cam-lock support pole sold separately to prevent water pooling. Helps extend the life of your boats upholstery and cover.. Trusted Industry Standard With millions sold, BoatVent II has become the go-to solution for boat owners looking to protect their investment. Made with UV-inhibited polymers for long-term durability and reliable performance.. Made in the United States, sold by the manufacturer.

Provide Sandbags to Greatly Improve Stability The stable base is 9 inches in diameter, the larger round base provides more stability and durabily, helps to hold the boat cover or boat tarp in harsh weather. In addition, we provide sandbags, so that the pole provides unprecedented stability experience. Durable Rustproof Steel Pole The steel pole is 1-18-inch in diameter, has a wall thickness of 0.8mm, can withstand pressures of more than 200 pounds, and is much stronger and more durable than other plastic poles The powder design Steel Pole to prevent rust, passed salt spray test.. ADJUSTABLE STRAPS The heavy duty 5 large mushroom cap features with 3 holes1.4inch long and 0.4inch wide for threading straps through and hold the boat pole cover upright while putting the cover on, or during high winter winds. The mushroom cap is made of high quality ABS material than others on the market to prevent tearing your cover, prolong the service life. Easy to achive 4 Adjustable Heights The steel poles can be easily removed with the push-button locking system, to achieve the height of 17inch, 30inch, 42inch and 55inch respectively, which can better match the depth of the boat or the height you need to support the boat cover.. Easy to Use Warranty - This supportpole can support any area under your boat cover,prevent deris and water build-up, helps maintain the lifetime of your boat. At Tuszom, We offer 36 months warranty. Any request will be responsed within 24 hours, please contact us if you have any questions..

Boat Cover Support Pole SetSet contains 2 telescopic poles 8 wear-resistant nylon ropes anti-rust metal caps, comprehensive coverage of bow to stern support needs, rain and UV resistance, anti-hail cuts, all-season guarding the boat paint.. Adjustable Height, Easy to Fit A Variety of Boat SizesThe boat cover support bar can be quickly adjusted in height, there are multiple buttons to lock the different heights, up to 53.5 inches, perfect match for different sizes of boat covers, tilting the deck can also be firmly supported.. Four Sections Telescopic Aluminum Tube, Ultra-Portable for Storage1.3m telescopic aluminum tube 302724MM OD, only 30cm after folding in four sections, lightweight and rust-proof material is convenient to store in the cabin or toolbox, load as you go.. Strong Iron Square Tube BaseBoat cover support pole using iron square tube base anti-tipping snap design, can withstand strong winds and bumps at sea, avoiding the boat cover from water accumulation and tearing, metal bite structure life enhancement of 50.. Self-Locking Linkage for Quick InstallationThe support pole adopts innovative glass bead link design 8 reinforced adjustable rope synchronized tensioning system, no need for complex tools, a single person can fix the boat cover by pulling the rope, rope buckle anti-dislodgement design to bid farewell to repeated adjustments troubles, marina novice can also quickly get it done..

Stabilized support bar frame and easy adjustment systemThe boat cover support poles are made of durable aluminum alloy material, aluminum tubes are 1mm thick, durable, won't rust after many times of use and can withstand the pressure of storms, meanwhile the boat cover support bar is adjustable in any length from 22.6-62 to fit different heights of boat covers.. A set of strut bar fittings prevents water from pooling2 Pack support poles are matched with 6 webbing straps and 2 weight bags, the weight bags are filled with water and mounted on top of the poles, and webbing straps are mounted on top of the poles, which prevents them from being blown over by strong winds.. Careful design won't damage your boat coverBoat cover poles use round mushroom caps that won't damage your boat cover while holding it up better, large discs on the bottom for better grip and stability, and top-mounted webbing that can be tied around the edge of the boat to stabilize the support poles.. Suitable for many styles of boat coversBoat cover support pole is adjustable, allowing the height of the support pole to be adjusted for different sizes of boat covers, thus fitting most styles of boat covers, such as pontoon boat cover, jon boat cover, v hull boat cover, runabout boat cover and more.. Quick and easy installationFill the weight bag with water and place it on the bottom of the support pole, then mushroom cap the top of the pole to install the webbing straps, hook the edge of the hull with the hook on the end of the webbing straps, then adjust the length of the strap to keep the strap taut..

? The 8pcs steel poles can be easily removed and assembled with the push-button locking system, to achieve the height of 17inch, 30inch, 42inch and 55inch respectively, better matching the depth of the boat or the height you need to support the furniture cover.. The steel pole is 1-18-inch in diameter, with a wall thickness of 1mm, can withstand pressures of more than 200 pounds, and is much stronger and more durable than other plastic poles our painted support pole passed salt spray test, rust-resistant UV-resistant, durable in all-weather conditions.. Mushroom cap features with 3 holes 1.4inch long and 0.4inch wide for threading ropes through and hold the boat pole upright while putting the cover on, or during high winter winds. With Sun Protection, the PE ROPES is not easy to be aging and breakage but durable even if exposed to sun.. ? The mushroom cap is 5 in diameter 0.13 thickness The stable base is 9 in diameter 0.2 thickness,for it is more stable and durable, helping hold the boat cover or boat tarp in harsh weather. ABS has high strength, corrosion resistance, and high temperature resistance. Due to ABS material, the quality of mushroom cap and base is higher than that of others, to ensure it anti-tear and durable.. This support pole can support any area under your boat cover, prevent deris and water build-up, improving the lifetime of your boat. Any request will be responsed within 24 hours, please contact us if you have any questions..

High Quality Material The boat cover support poles is made of high-quality stainless steel, which is rust-proof and strong and will not bend or break. The diameter of the thicker end of the stainless steel rod is 12.5cm, and the diameter of the thinner end is 0.862.2cm, 5 mushroom cap is made of sturdy ABS with an inner diameter of 0.7519mm and our thickened hole wall is double that of others for resistance to deformation. The boat cover support poles cap helps reduce and prevent water accumulation. Adjustable Height This boat poles for cover has an adjustable height of 16.5 in-59 in. boat cover support poles adjustable has 4 adjustable heights 16.5 inch, 30.3 inch, 44.9 inch, 59 inch, The enhanced rotation lock method allows the boat cover support poles tall to be adjusted in length within the range of 16.5-59 to adapt to the height of the cabin. Upgraded Extra Large Base We know many boat cover support pole are prone to collapse, so we have designed this extra large metal quadrupod base, with an astonishing diameter of 22.5 inches bottom equipped with anti-slip foam pads. The adjustable hole diameter largest is 126mm, It keeps boat cover support rod stable and is better than other plastic or rubber bases, boat cover poles adjustable won't tilt or collapse in hurricanes and snowstorms. Adjustable Straps This support poles for boat cover contains 6 11.5ft-long adjustable straps, using high-density webbing technology and sturdy sewing, flat structure, scattered stress points, strong durability, rubberized stainless steel hook for quick release and won't scratch your hull, and the cap has 3 slits to allow for additional straps for stronger support. Perfect for bass boats, jon boats, pontoons, fishing boats, kayaks and center console boats. Boat Cover Support Poles 2 Pack This value adjustable boat cover support pole 2-pack contains 8 pcs stainless steel poles, 2 quadrupod bases bases, 2 black mushroom heads, 6 black webbing, 1 instruction and 1 storage bag for convenient storage and easy portability. The boat cover support poles metal is easy to install, just follow the included instructions to complete the installation. TIPS It is recommended to use at least 2 poles for boats 18-24 feet, and 3 or more poles for boats over 24 feet.

What You Will Receive the package contains 4 pieces of pontoon boat cover support poles for boat cover supporting, enough in quantity to meet your various boat maintenance needs, and you can also use them for BBQ and outdoor dining table protection. Adjustable Height each adjustable boat cover support pole contains separate poles for height adjustment, each part measures about 8.4 inches and is easy to install, you can adjust the pole to the needed height to fit the various heights of your boat cover. Provide Stable Support the boat cover support system is designed with 5 inch mushroom top and 9 inch base, the top come withs 3 slits which can be linked with tightening straps to provide stronger protection, and the round base provides more stability and durability, which helps to fix the hull or canopy in bad weather. Easy to Use our boat cover support poles can provide support for different areas under your boat covers, which can effectively avoid water accumulation and debris, helping maintain the service life of your boat. Multiple Uses these boat cover poles are made of ABS PVC plastic material, which is strong and not easy to break, practical for supporting boat covers and helping maintain boats, also suitable to play a good supporting role for the maintenance of a series of large outdoor items.

Outstanding Performance Placing the air cushion between the hull and the boat cover supports sagging areas, ensuring rain, melting snow, and falling debris slide right off, thereby preventing the cover from sagging, tearing, and developing mold.. Double-Layer Reinforcement The airbag features a high-strength PA co-extruded film on the inside for exceptional airtightness, while the outer layer is made of abrasion-resistant PP material. This dual-layer construction offers puncture resistance and withstands harsh outdoor conditions.. Perfect Size When inflated, the marine supports system measures approximately 87 inches by 37 inches, providing reliable support for the center of the boat cover. When deflated, it folds flat for storage and takes up minimal space.. Versatile Applications Ideal for pontoon boats, fishing boats, speedboats, and cruisers. Whether you're preparing for winter storage or protecting your boat during rainy summers, this pillow fits perfectly under any standard boat cover.. Comprehensive Support Solution You will receive one white inflatable cushion designed specifically for boat covers to ensure the cover remains upright during the off-season or daily storage..

Adjustable Pole Height Range Our Boat Cover Support Pole can be adjust from 12 to 54 featuring 6 separated poles for extension, you can adjust the height to your desired length to fit your boat cover perfectly, keeping it well protected.. Multi-application This ABS Boat Cover Support Pole can be applied to waterproof covers such as boat covers, furniture covers, oven covers, etc. Holds up boat covers and other cover well to prevent water from pooling and debris from accumulating.. Durable ABS Material This Support pole is made of tough yet ABS plastic, extremely strong and reliable designed for long-lasting performance.. Durable Base The 5 diameter dome shape cap and 9 diameter sturdy base provide an extra support and strong protection helping to hold the boat cover in harsh weather.. Easy to Install Our support boat pole can support any area under your boat cover, reduce and prevent debris and water build-up, help extend the using time of your boat and boat cover..

Product Dimensions - Good choice for most outboard motors 115-225 HP, cover size 31L x 23W x 29H. Fits most boat motor brands like Honda, Tohatsu, Yamaha, Suzuki, Mercury, Evinrude, Hangkai etc. NOTE This cover is a universal fit type, don't just refer to how much the horse power your motor is, please measure your motor dimensions carefully before you buy. Upgraded Material - Made of 600D marine grade polyester with waterproof laminated undercoating. Excellent for boat off-season outdoor storage, mooring. Double stitching, all seams sealing taped can improve durability. Full coverage protects your engine from rain, wind, snow, fog, dust and scratch.. Heavy Duty Waterproof - With high level double stitching sewn, all seams sealing taped can improve cover's durability. Full coverage to protect your boat engine from rain, wind, snow, fog, dust and scratch.. Multiple locking systems - Heavy duty Elastic cord make adjustment for a snug fit. Two click-close straps at back corner for you to lock on the cable if needed.. Practical Design Quick-release buckle straps in front side allows easy install and remove. Air vent at back side added ventilation for long-term storage situation. Giving your motor all year protection and extending service life..

What You Will Receive the package contains 4 pieces of pontoon boat cover support poles for boat cover supporting, enough in quantity to meet your various boat maintenance needs, and you can also use them for BBQ and outdoor dining table protection. Adjustable Height each adjustable boat cover support pole contains separate poles for height adjustment, each part measures about 8.4 inches and is easy to install, you can adjust the pole to the needed height to fit the various heights of your boat cover. Provide Stable Support the boat cover support system is designed with 5 inch mushroom top and 9 inch base, the top come withs 3 slits which can be linked with tightening straps to provide stronger protection, and the round base provides more stability and durability, which helps to fix the hull or canopy in bad weather. Easy to Use our boat cover support poles can provide support for different areas under your boat covers, which can effectively avoid water accumulation and debris, helping maintain the service life of your boat. Multiple Uses these boat cover poles are made of ABS PVC plastic material, which is strong and not easy to break, practical for supporting boat covers and helping maintain boats, also suitable to play a good supporting role for the maintenance of a series of large outdoor items.

Durable and Rustproof Construction GOOSO boat cover support poles are made of galvanized iron pipes with blue plastic parts, providing long-lasting support for your boat cover. Adjustable Height for Customized Use You can install the iron poles from one to three to adjust the height and adapted to different situations ensuring a perfect fit for your boat cover and prevent water from pooling. Versatile and Practical Design The mushroom cap features 3 holes for threading ropes through to secure the poles in place, while the sturdy base provides stability even in harsh weather conditions for preventing water build-up and debris accumulation. Quick and Easy Installation With our user-friendly design and clear installation instructions, you can have the boat accessories-support pole set up and ready to go in just 10 seconds. Thickened webbing provided have stainless steel hooks and adjustable buckles, which is durable and easy to use. Convenient Storage Solution Webbing and hook design brings convenience to installation. 220D Oxford storage bag is very convenient for you to carry and store the support poles. Complete Package Contents Includes 2 pack boat cover support poles, 6 black straps measuring 4 meters each, and a 210D black carry bag for convenient storage and transportation.

Upgraded larger round base is 9 inch instead of 7 inch in diameter provides more stability and durabily, helps to hold the boat cover boat tarp furniture cover in harsh weather. In addition, straps are provided so that the poles provide unprecedented stability experience. 8 Easy to achieve 8 heights from 18 inch to 57 inch18 inch, 38 inch, 41 inch, 44 inch, 47 inch, 50 inch, 54 inch, 57 inch respectively with the push-button locking system. Better match the depth of the boat or the height you need to support the boat cover and furniture cover.. Nukugula steel support poles are 1.27 inch in diameter others are only 0.62inch, with a wall thickness of 1.2mm others are only 0.8mm, can withstand pressure of more than 300 pounds, and is much stronger and more durable than other plastic poles or aluminum poleseasy to bend and deformation The powder design steel pole to prevent rust has passed salt spray test.. 3 The heavy duty 5 large mushroom caps feature with 3 holes1.4inch long and 0.4inch wide for threading straps through and hold the boat cover pole upright while putting the cover on, or during high winter winds. The mushroom caps are made of more premium ABS material than others on the market to prevent tearing your cover, prolong the service life.. These support poles can support any area under your boat cover, preventing deris and water build-up, and helping maintain the lifetime of your boat. Any request will be responsed within 24 hours, please contact us if you have any questions..

Heavy-Duty Iron Support - Made with solid iron poles and a 4 lb weighted base, this 2 pack support system is designed for added stability in wind, rain, and everyday outdoor storage. It helps keep your boat cover lifted and better supported. Height Customization by Section Assembly Each set includes four interlocking iron rods. These simply but firm metal screw sectionsno twist locks or clamps, helps to reach your desired height17in,33in,50in,66inand keep each boat cover pole stable without wobble or cracking. Full-Contact Iron Base Each boat cover support pole features an 11 x 11 full-contact base made from corrosion-resistant coated iron with 7mm thicknesswhich provides better stability than hollow or tripod-style mounts. EVA bottom protects your boat from scratches. Wider Top Cap with 8 Straps The durable 7.5 nylon top cap is 20 wider than standard models with 4 reinforced mounting holes vs typical 3 holes. When paired with 15ft L x 1W heavy-duty webbing, it ensures your boat cover stays tightly secured and optimally elevated. Quick Setup, Ready to Use Install your boat cover support poles in a minuteno tools needed. Comes with 8 adjustable tie-down straps for extra hold. Whether youre covering your pontoon, fishing boat, or ski boat, this boat pole kit makes protection fast and reliable.

STOP WATER POOLING - This boat cover support system helps lift low spots in your cover so rainwater and snow are less likely to collect. Two support poles, six straps, and a center connecting strap create a steadier peak for storage, storms, and off-season protection.. WEIGHTED FOR STABILITY - Each pole stands on an 11 x 11 inch full-contact metal base that weighs 3.3 lb for a secure, balanced feel. The EVA pad helps protect your deck from scuffs while the wide footprint supports your boat cover without the wobble of lighter setups.. ADJUSTS TO FIT - These adjustable boat cover support poles extend from 14 to 56 inches using four 14 inch threaded sections per pole. You can quickly customize height for pontoon boat cover support poles, jon boats, fishing boats, and other covers that need reliable center lift.. SECURE THREADED DESIGN - Built with carbon steel pole sections and a threaded mushroom cap, this boat cover pole system stays firmly connected during setup and storage. The screw-together structure helps reduce accidental collapse, so your cover stays higher, tighter, and better supported in changing weather.. READY FOR MORE - Designed for pontoon, bass, jon, V-hull, and fishing boats, this boat cover support system also works for patio furniture covers and similar outdoor covers. The 2-pack includes support poles, weighted bases, straps, and rope for a complete setup right out of the box..

Adjustable Support PoleThe boat cover support pole is designed with 1easy-to-use telescoping rod and 1 separate poles for easy extension. Simple twist and tightening which adjusts to any height from 25 inch to 64 inch. Our support pole can better match the depth of the boat or the height of your need.. Rustproof Steel Support RodsOur boat cover poles are made of steel material which can providing high strength and durability. The steel pole is 1.22 inch31mm in diameter, has a wall thickness of 0.5 mm. Increasing the size of diameter preventing bending and breaking under heavy pressure or harsh environments.. Heavy Duty Mushroom Cap The 5 inch mushroom cap is made of marine stainless steel material. Mushroom-shaped cap designed prevents tearing of your boat covers. The heavy duty mushroom cap has 3 holes for threading straps through and hold the boat cover support pole upright during harsh environments such as high winds.. Enlarged 9.8 Inch Bases The 304 stainless steel stable base is 9.8 inches in Length Width, wider than most of base in the market. Features with plastic feet, the boat cover pole base won't scratch your boat at any time. Heavy duty stainless steel material base provides tarp poles more stability and durably, helps to hold the boat cover in harsh weather.. Perfect Fit Eliminate Waterlogging This support bar can support area under the boat cover, preventing water build-up. The boat cover support will take care of all low sagging spots in the boat cover. Pontoon boat cover support poles helping to maintain the life of the boat..

Boat Cover Support Pole adjusts from 12 - 54 H. Multiple piece pole fits together to adjust to needed height. Made of tough, rust-proof ABS plastic. Supports any area of a boat cover. Top accepts additional support straps.

Adjustable Support PoleThe boat cover support pole is designed with 4 poles for easy extension. The poles can be easily removed with the Thread screwing locking system. You can achieve the height of 15 inch, 29 inch, 43 inch and 57 inch respectively. Our support pole can better match the depth of the boat cabin or the height of your need.. Rustproof Support RodsOur boat cover poles are made of aluminum alloy material which can providing high strength and durability. The aluminum alloy pole is 1 inch 25 mm in diameter, has a wall thickness of 3 mm. Thickened pipe wall preventing bending and breaking under heavy pressure or harsh environments.. Heavy Duty Mushroom Cap The 5 inch mushroom cap is made of marine stainless steels material. Mushroom-shaped cap designed prevents tearing of your boat covers. The heavy duty mushroom cap has 3 holes for threading straps through, 3 adjustable straps hold the boat cover support pole upright during harsh environments such as high winds.. Full-touch base The stainless steels stable base is 8 inches in diameter, wider than most of base in the market. Features with plastic feet, the boat cover pole base won't scratch your boat at any time. Heavy duty stainless steels material base provides tarp poles more stability and durably, helps to hold the boat cover in harsh weather.. Perfect Fit Eliminate Waterlogging This support bar can support area under the boat cover, preventing water build-up. The boat cover support will take care of all low sagging spots in the boat cover. Pontoon boat cover support poles helping to maintain the life of the boat..

Adjustable Support PoleThe boat cover support pole is designed with 4 telescopic pole in one piece for easy extension. You only need to twist and lock the required height. This unique design ensures maximum stability at any height form 20 to 57 inch. Our support pole can better match the depth of the boat cabin or the height of your need.. Rustproof Support RodsOur boat cover poles are made of aluminum alloy material which can providing high strength and durability. Aluminum support rods are 1 in diameter with a 1.5 mm wall thickness. Increasing the size of diameter preventing bending and breaking under heavy pressure or harsh environments.. Heavy Duty Mushroom Cap The 5 inch mushroom cap is made of marine stainless steels material. Mushroom-shaped cap designed prevents tearing of your boat covers. The heavy duty mushroom cap has 3 holes for threading straps through, 3 adjustable straps hold the boat cover support pole upright during harsh environments such as high winds.. Full-touch base The 316 stainless steels stable base is 8 inches in diameter, wider than most of base in the market. Features with plastic feet, the boat cover pole base won't scratch your boat at any time. Heavy duty stainless steels material base provides tarp poles more stability and durably, helps to hold the boat cover in harsh weather.. Perfect Fit Eliminate Waterlogging This support bar can support area under the boat cover, preventing water build-up. The boat cover support will take care of all low sagging spots in the boat cover. Pontoon boat cover support poles helping to maintain the life of the boat..

Sturdy Stable DesignOur boat cover support poles feature a sturdy metal tripod base for stability in stormy weather. The reinforced rubber joints protect your boat from scratches. For any questions, feel free to contact us at any time.. Adjustable HeightThe telescoping support poles, adjustable from 33 to 66, simply twist and lock the pole to securely support your boat cover. The boat cover poles provide a custom fit for jon boat covers, aluminum boats, yachts and more.. Easy Setup StorageThe boat tarp support system includes three 3.5m adjustable straps and a 1.6m reverse-folding telescoping pole for quick assembly without tools. The compact storage bag ensures easy portability and saves space.. Durable WeatherproofCrafted from high-quality, rust-proof metal, these support poles are designed to prevent boat cover sagging and collapsing, effectively avoiding rainwater and snow accumulation that can damage your hull. A must-have boat accessory for jon boats, deck boats, fishing boats, keeping your vessel safe and dry year-around.. Wide ApplicationThe boat cover support system is widely used in the marine field, suitable for bass boats, Jon boats, pontoon boats, fishing boats, yachts and center console boats. Whether protecting against sunlight and dust at the dock or preventing damage during long-distance transport, it adapts to canvas boat covers and other materials with ease..

Size 22-70. Packaged 1 per box.. Description Snap vinyl end.

Eliminates virtually all possible areas that could collect water and allow it to pool. Designed for simplicity with two pre-installed, adjustable 20-foot straps that snap quickly to the rear tow hooks. One 40-foot adjustable strap to cradle the bow. System fits up to 28-foot boats. For pontoon boats, two systems are required and can easily be joined to create a perfect frame.

Reliably elevates boat cover to prevent water from accumulating atop cover. Can extend life of the cover by as much as 50 percent. Intended for boats up to 19 feet. Telescoping center pole adjusts from 28 inches to 48 inches tall. Pole, poly web straps and bow spreader form double ridgeline under cover. Water runs off the cover rather than pooling in low center area. 1-inch wide black poly web straps attach to stern using non-marring hooks.

Boat cover support pole 28 -48. 50' of 1 polypropylene webbing. Quick release adjuster buckles. Ideal for boats up to 23'. Creates a slope in your boat cover to prevent water from pooling or pocketing. Easy installation. Non-marring materials won't scuff boat rails. Protects boat cover from mold and mildew. Includes two hooks.

Warranty and package - FBA Prime shipping. 1 Year warranty offered by Affordura. The package contains 4 sections of boat cover pole 1 Pcs, 1x tripod base, 1x sleeve, 1x top cover, 6x straps, 1x storage bag to keep boat cover support pole stored conveniently, and easy to carry out.. Strong Stability - 14'' large metal base has triangle cross sections, is more stable than others, hard to fall over even during a rain storm. With the extra sleeve, the tripod can hold your boat cover support bows upright in place while putting the boat cover on. Comes with plastic feet, it won't scratch the deck of your boat when setting up.. 8'' Wider Size - Thicker hexagon top cover has a strong bearing capacity to hold the heavy boat cover. Inserted 6 webbing straps, it keeps your boat cover support systems away from big puddles, and 6 directions make it easy to release. And the reinforced root makes it hard to break or crack, has a long useful life, can be used for a long time on hot or rainy days.. Up to 71'' Height - 4 Sections pontoon boat cover support poles, each aluminum pole long 18.7'' extends 27-71'' , thicker diameter makes it more durable. The adjustable spiral connector can tighten the height you need, ideal for small to large boats. Non-smooth textured pole design increases the friction of boat cover poles, no worries about it will bend or slide down when the snow storm comes.. Easy to Install - Boat cover poles adjustable with base are easy to set up and remove, it will work perfectly with adjustable support straps. Tips 18-24ft boat is recommended to use at least 2 poles. Above 24ft boat is recommended to use 3 or more poles..

ADJUSTABLE HEIGHT FOR A PERFECT FIT Boat cover support pole features an easy-to-use telescoping pole that adjusts to any height from 23.5 to 56 to hold up covers and tarps made from canvas or plastic and prevent water from pooling.. COMES W MUSHROOM CAP BUTTON SNAP RUBBER END These boat cover support poles with snap and mushroom cap system accommodates various styles of covers. Snap to your cover to hold it in place or use the rounded cap to prevent tearing your cover.. ULTRA DURABLE MARINE GRADE This prop boat cover pole is made from strong yet lightweight aluminum to resist rust and incease its useful life. Our aluminum tarp poles won't bend or break in pontoons, deck boats and fishing, ski, paddle or jon boats.. USE WITH OR WITHOUT STRAPS The rounded cap has 3 slits for threading straps sold separately through and hold the boat pole cover upright while putting the cover on, or during high winter winds. Use multiple for pontoon boats or larger boatcovers.. WHY BETTER BOAT We are a small family owned American business committed to making premium quality RV care and boat cleaning supplies. We stand behind your satisfaction and our boat care accessories including our bimini and boat cover posts..

Protects Your Boat Cover Helps keep your boat cover from sagging and allowing water to pool. Extends the Life of Your Cover Helps maintain the quality of your boat cover. Adjustable Height Height adjusts from 30-inches to 50-inches in 2 -inch increments to fit different boat styles. Compatibility Fits most boats up to 22-feet long. Easy to Install Easy to install and stores compactly when not in use.

What You Will Receive the package contains 4 pieces of pontoon boat cover support poles for boat cover supporting, enough in quantity to meet your various boat maintenance needs, and you can also use them for BBQ and outdoor dining table protection. Adjustable Height each adjustable boat cover support pole contains separate poles for height adjustment, each part measures about 8.4 inches and is easy to install, you can adjust the pole to the needed height to fit the various heights of your boat cover. Provide Stable Support the boat cover support system is designed with 5 inch mushroom top and 9 inch base, the top come withs 3 slits which can be linked with tightening straps to provide stronger protection, and the round base provides more stability and durability, which helps to fix the hull or canopy in bad weather. Easy to Use our boat cover support poles can provide support for different areas under your boat covers, which can effectively avoid water accumulation and debris, helping maintain the service life of your boat. Multiple Uses these boat cover poles are made of ABS PVC plastic material, which is strong and not easy to break, practical for supporting boat covers and helping maintain boats, also suitable to play a good supporting role for the maintenance of a series of large outdoor items.

1200 - Due to the 1200D heavy-duty marine grade solution-dyed polyester material and quadruple folded double stitching seam Our stitching is very dense, with 6 stitches per inch, Nukugula boat covers have excellent tear resistance, scratch resistance, and UV resistance. And extra 3 reinforced design at bow and stern make the cover more durable.. 3 The 5-layer fabric Waterproof Surface Anti-UV Coating 1200D Solution-dyed Polyester PU Backing PU Backing provides boat cover with excellent waterproof. Moreover, dense stitching can effectively prevent rainwater from flowing in through the seam. And with our 3D air vents on both sides, your boat can always keep dry.. This heavy-duty boat cover fits for 17 '-19' long, beam width up to 96'' v-hull tri-hull runabout pro-style fishing boat. With widened and thickend 2-inch others are 1-inch webbing loops with Bartack Stiches storage bag, our bass boat cover is perfect for mooring and long-term storage.. - The entire hem is sewn with high elasticity PP elastic rope, and the boat cover is equipped with 11 adjustable straps, so Nukugula 1200D boat cover can better fit your boat, providing all-round protection and can be trailerable.. - - This v-hull boat cover adopts special solution-dyed process, which can ensure that the color will not change even after being placed outdoors for a long time. No need to worry about the cover may dirty your loved boat..

Strong Stable Triangle Base - 14'' Thicker metal base has triangle cross sections, with strong stability, boat pole support is hard to fall over even during a rain storm, more stable than other thin bases. The anti-slip tab at the bottom of the tripod can further prevent the pole from sliding around on the boat. With the extra sleeve, the tripod can hold your boat support poles for cover upright in place while putting the boat cover on.. 8'' Wider Size - Thicker hexagon top cover has a strong bearing capacity to hold the heavy boat cover. Inserted 6 webbing straps, the boat cover support pole keeps your boat cover support systems away from big puddles, and 6 directions make it easy to release. And the reinforced root makes it hard to break or crack, has a long useful life, and can be used for a long time on hot or rainy days.. Up to 71'' Height - With 4 Sections, the boat support pole can be adjusted from 27'' to 71'', and the thicker diameter makes it more durable. Non-smooth textured pole design increases the friction of boat support poles, no worries about it will bend or slide down when the snow storm comes. The adjustable spiral connector can tighten the height you need, ideal for small to large boats.. Easy to Install - The pontoon cover support system with base is easy to set up and remove, it will work perfectly with adjustable support straps. Please adjust the boat cover poles to the height you need, and keep all the straps stay tight. It can reinforce your boat cover and let rain and snow glide off without collapsing the cover.. Won't Scratch Boat - The pontoon boat cover support poles come with plastic feet, so they won't scratch the deck of your boat when set up, effectively protecting your deck. TIPS 18-24ft boat is recommended to use at least 2 poles. Above 24ft boat is recommended to use 3 or more poles. Great for Bass Boat, Jon Boat, Pontoon, Fishing Boat, Kayak Center Console Boat.. Valued Package - The package contains 8 sections of boat cover pole 2 Pcs, 2x tripod base, 2x sleeve, 2x top cover, 12x straps, 2x storage bag to keep boat cover support pole stored conveniently, and easy to carry out..

Aluminum support pole adjusts from 36 to 64. Adjustable. Aluminum. Keeps water from pooling in your boat with adjustable pole. Male snap end fits into female snap on support pad. Rubber endcap grips the boat floor for secure placement. Aluminum pole is rustproof, corrosion-resistant. Durable and withstands elements in both saltwater and freshwater. Easy extension to fit your application.

Upgrade Iron Alloy MaterialThe boat cover support pole is made of rust proof and sturdy iron alloy material, which has excellent durability and higher load-bearing capacity, ensuring that the pole won't bend or break even under harsh weather conditions. Stable 24in Triangle BaseAdopting a reverse folding tripod design with a 24 inch enlarged tripod base, the triangular stability structure provides better stability performance, effectively preventing collapse and protecting your deck in adverse weather conditions. Adjustable HeightThe height of boat cover support pole can be adjusted from 33in to 63in. You just need to twist and lock the desired height. The height is sufficient to support the boat cover and waterproof cloth to prevent the accumulation of rain and snow in adverse weather conditions, which helps to maintain the life of the boat and boat cover. Quick and Easy InstallationThe pontoon cover support system with base is easy to set up and remove, it will work perfectly with adjustable support straps. Please adjust the boat cover poles to the height you need, and keep all the straps stay tight. 3 Straps and Storage BagThe mushroom cap at the top has three holes and comes with three nylon ropes that can be threaded through them to keep the boat cover pole upright and effectively support the boat cover. Also equipped with a portable bag for better carrying and storage.

Storm-Stable Cross Base - Engineered for severe weather, the 27.5-inch metal cross base and 4-inch steel mushroom head unite to defy strong winds, locking the supporting poles securely upright. The triple-slot mushroom head allows additional tie-down straps for enhanced security. Height-Locking Adjustable Pole System 25-62 - The pontoon boat cover support poles are 4 separate poles, which can achieve height adjustment from 25 to 62, and the boat cover pole can be tightened according to the matching height. The screw-in installation effectively solves the boat poles system common issue of gradual shrinkage under prolonged tension, locking your selected height securely in placenot easy to slide and collapse, even under sustained load. 300-lb Capacity Heavy-Duty Steel Poles - Constructed from premium rust-proof iron alloy, these boat tarp support poles feature a robust 1.3-inch diameter and 2mm wall thicknessfar exceeding typical alternativestypically just 0.62 in diameter and 0.8mm thick. The heavy-duty build withstands over 300 lbs of pressure, while the thickened steel mushroom cap promotes water runoff and resists deformation. This system delivers superior strength and durability versus plastic or aluminum poles. Reinforced Adjustable Webbing Straps - This boat cover support includes six 14.4-inch adjustable straps with quick-release steel hooks for secure fastening. Constructed from heavy-duty webbing with reinforced stitching, the flat-strap design evenly distributes stress. The six multi-directional straps effectively prevent water pooling while keeping your cover taut. Built to resist tearing and weathering, the boat poles delivers durable, all-season support and fits most boat covers. All-Weather Protection This precision-adjustable support system eliminates sagging zones and prevents the buildup of rainsnow. By promoting rapid runoff, it protects your boat cover from weight damage and extends its service life. Ideal for pontoon covers, boat tarps, and canvases. Also doubles as a support for patio furniture covers.

USA BASED, DESIGNED TESTED Our boat cover support pole features a higher quality telescoping poles adjustable from 22 to 56 to hold up covers and tarps made from canvas or plastic and prevent water from pooling. We added six straps that others don't to develop the best boat support system for pontoon, bow riders, wake, ski, jon, and pleasure boats.. THE MOST CAP OPTIONS Our boat cover support pole system comes with strong caps with hook and loop included. The stainless snaps are also installed removable for ease of use and accommodates various styles of covers. Use the snaps, the hook and loop patches, 6 straps, to optimize your pole fitment. It is easy to upgrade to our system.. THE BEST ALUMINUM POLES Our class leading pole is designed to withstand 100lbs of downward force Our boat cover poles are made from strong aluminum to prevent rust. They collapse to just 21 inches to fit compartments for storage. Our design has special ridged finger locks that are easier to use and stronger than others. They are great for deck boats, fishing, ski, paddle, and jon, bow rider boats.. THE MOST VERSATILE BASE Start with either the rubber boot base for small footprint or use the larger round pyramid base for more stability. Our base has a unique upgrade feature to enlarge the base into any material using the included stainless base screws.. STRAPS INCLUDED Unlike others, our pole sets include six 6 straps with hooks to improve the stability of the pole top keeping it upright while putting the cover on, or with high winter winds. Use multiple for larger pontoon boats, bowrider boats, or boat covers..

Prevent Cover Sagging Water Pooling This boat cover support system lifts your cover to create proper drainage, helping prevent rainwater buildup, debris accumulation, and fabric sagging that can shorten the life of your boat cover. 4 Pole Support System for Better Coverage Includes 4 adjustable support poles, 12 long straps, 4 weighted water bags, and storage bags for more balanced support across larger boat covers compared with single pole systems. 5 Adjustable Heights from 15 to 67 Each telescoping boat cover support pole adjusts to 5 height levels, making it easy to fit pontoon boats, fishing boats, kayaks, canoes, inflatables, and boat tarps. Heavy Duty Stainless Steel Construction Built with rust-resistant stainless steel poles, reinforced hooks, ABS stable bases, and weighted bags to help keep poles upright even in windy or wet conditions. Works for Boat Covers, Tarps Marine Storage Ideal for pontoon boat covers, canvas tarps, storage covers, and outdoor protective covers by helping reduce pooling and extending cover.

Metal Mushroom Cap We designed the all new heavy duty metal mushroom cap for our pontoon boat cover support poles, offering long-lasting strength and performance even in the harsh weather.. Wider Aluminum Base Wider base means more stable standing, this boat cover support poles base is made of heavy duty air-craft grade aluminum alloy, it's 16.9 in diameter, also four pcs rubber sleeves on base, ensuring it stands stable and strong without any boat board scratched.. Tough Ratchet Tie-Down Rope System High-quality braided polypropylene rope, equipped with a quick-release mechanis, Pull-Lock, Open-Release, enabling effortless rope length adjustments without the risk of slippage, operated single handedly.. Three Heights Adjustable Heavy duty aluminum alloy poles are connected via Push-Button locking system, you can have 31, 45 and 59 height, which works great for the most of boats.. Everything You Need The package includes 2 sets of support poles, 7 ratchet Tie-Down RopesRope length 198, 7 stainless steel hooks, 1 pair of gloves, user mannual. It's a nice gift for pontoon boat water life lovers..

Premium Aluminum Crafted from premium aluminum, featuring polished and thickened anodization for exceptional strength and durability, ensuring your boat cover stays securely supported and in top condition for years, even in harsh weather conditions.. Adjustable Height The boat cover support stand provides 4 preset height options 15.35 390mm, 29.4747mm, 43.51104mm, 57.51461mm via tool-free threaded assembly. Designed for simple operation and secure stability.. Solid Metal Base Aluminum The Aluminum base is 7.9 200mm in diameter and weighs 3.75 pounds, which can maximize the contact with the ground, ensuring that the boat cover poles is always upright and will not fall over easily.. Aluminum Mushroom Cap Unlike cheaper ABS or nylon covers, our pontoon boat cover support poles mushroom cap is made of durable Aluminum. The smooth, burr-free surface protects your boat cover from scratches while offering long-lasting strength and performance.. Pakage 2pcs Boat Cover Support Pole Systems 2Alumunim Bases, 2Mushroom Caps, 8Alumunim Poles. Straps are not included..

Durable and Rustproof Construction GOOSO boat cover support poles are made of galvanized iron pipes with blue plastic parts, providing long-lasting support for your boat cover. Adjustable Height Range You can install the iron poles from one to three to adjust the height and adapted to different situations ensuring a perfect fit for your boat cover and prevent water from pooling. The boat cover support poles can be adjusted to a height of 17 to 55 inches. Versatile and Practical Design The mushroom cap features 3 holes for threading ropes through to secure the poles in place, while the sturdy base provides stability even in harsh weather conditions, preventing water build-up and debris accumulation. Quick and Easy Installation With our user-friendly design and clear installation instructions, you can have the boat accessories-support pole set up and ready to go in just 10 seconds. Comes with 2 x 15m blue ropes, you can cut your own to the right length for your boat size. Premium Quality Materials The ABS mushroom cap and base are designed for durability and strength, ensuring that your boat cover stays secure and protected. The painted steel pole resists rust and can withstand harsh outdoor weather conditions. Wide Compatibility Compatible with various boat types including V-Hull, Pontoon, Bass, and Jon Boat covers, making these support poles a versatile solution for different boat owners and cover styles.

Heavy Duty Waterproof Made with 1200D fabric on the top part, this t-top boat cover can withstand higher force in storing and trailering under 35MPH, reducing the possibility of tearing in upper part. Bottom 600D Marine Grade waterproof fabric is coated with anti-uv composite and PU waterproof backing, repelling water and withstanding sun exposure for all-weather protection. Snugly Fit Wide Compatibility Top 13 and bottom 11 quick release buckle and adjustable strap tightening system provides easy installation and quick-release. All-around bottom elastic hem ensures a 360 degree custom-fit. Fits most center console style boats with T-Top roof 17'-19' Long, Beam Width up to 102. Breathable Zipper Closure Air vents on both tail allow the wind blow through well, preventing water vapor gathering under the boat cover. The center console boat cover is designed with convenient zipper closure for easy in and out. Reinforced Detail 4 corners and other strength stress points are double reinforced, providing extra protection against sharp corner in storm. Double stitching and Bar-tack stitching snap the straps firmly in place to reduce tearing in stitching and seam. Package Package included 1boat cover, 1motor cover, 11straps. Notice Please measure your boat before your purchase. Be sure to clean and dry before storage.

Heavy-Duty Protection Crafted from 600D heavy-duty marine grade canvas, ensures long-lasting protection for your Bimini Top Designed to endure the challenges of marine conditions, ideal for SavvyCraft's standard 3 Bow and 4 Bow Bimini Tops, it also offers a versatile fit for many other models available in the market. Vibrant Color Retention Made of solution-dyed fabric, this storage boot ensures superior colorfastness and resistance to fading Enjoy vibrant colors that remain bright, even after prolonged exposure to sunlight and harsh weather conditions, maintaining it's aesthetic appeal for years to come. Comprehensive Protection Shield your Bimini Top from the elements with UV-treated fabric that protects against rain, snow, dirt, dust, and harmful UV rays, ensures your Bimini Top stays clean, prolonging its lifespan and maintaining the cover's appearance. Convenient Design Featuring a full zipper for effortless storage, our storage boot makes covering and uncovering your Bimini Top a breeze The cut-out opening for stern lights adds to its functionality, providing hassle-free access while maintaining safety on the water. Options to Choose Select from nine vibrant colors and a range of sizes to perfectly match your boat, whether your tube is Round or Square Additionally, enjoy peace of mind with a one-year warranty against material defects or workmanship.

Seal Skin Boat Cover Support Poles With Straps are specifically designed to prevent the accumulation of water, snow, leaves, and other debris on your boat cover, ensuring effective weather protection.. Customize the height effortlessly with a versatile range from 29 to 56, providing flexibility for various applications. Holds up to 120 lbs.twice as much as most poles Will fit most BoatPontoon applications up to 28 feet long.. Seal Skin Boat Cover Support Poles built from Strong aluminum tubing extend the cover's life and your investment.. ? Easy to set up and adjust, this support pole facilitates a hassle-free installation process, saving you time and effort. These support poles are a versatile and reliable choice for boat owners seeking effective cover support.. ? The set includes a Telescoping Cam Lock Support Pole, Straps, cap, base, and storage bag..

Two adjustable support poles from 27-50. 60' of 1 polypropylene webbing. Quick release 12 adjuster buckles. Four injection molded hooks to secure decking. Creates a slope in your boat cover to prevent water from pooling or pocketing. Easy installation. Non-marring materials won't scuff boat rails. Protects pontoon cover from mold and mildew.

Dependable Protection Transhield Boat Covers utilize a specialized multi-layered fabric technology, combining a polyester nonwoven, hot-melt adhesive, and polyethylene outer layer, to create a strong barrier against harsh environmental elements.. Dependable Protection Transhield Boat Covers utilize a specialized multi-layered fabric technology, combining a polyester nonwoven, hot-melt adhesive, and polyethylene outer layer, to create a strong barrier against harsh environmental elements.. Durable Transhield Boat Covers are made to withstand the elements that nature throws at it without ripping or tearing and when properly cared for can be used year after year. Includes perimeter rope and tie-downs to keep the cover secure. These covers are not meant for trailering. Anti-Condensating and Water Resistant The covers are designed to be both anti-condensating and water resistant, allowing moisture to escape while resisting rain, snow, and other liquids from penetrating the cover.. Paint and Decal Protection Transhield Boat Covers are sun resistant, protecting boat surfaces from the sun's harmful rays. This resistance prevents fading, cracking, and deterioration of gel coats, paint, and other sensitive components, extending the pristine appearance of your boat..

Winterization Moisture Control Provides consistent airflow and support under your cover to reduce condensation, manage humidity, and protect against water damage during storage. Made from marine-grade materials for easy installation and long-term durability.. ADJUSTABLE ALUMINUM SUPPORT POLE STRONG, LIGHTWEIGHT EASY TO SET UP Anodized aluminum pole extends smoothly to fit a wide range of boats. Designed to hold up to 170 lbs of pressure, keeping your cover tented and free of pooling water. 2 Flip-locks make height adjustments fast and secure for a custom fit every time. Spline tip locks securely into the Boat Vent 3.. SWIVEL BASE SECURE FIT FLOOR PROTECTION Innovative rotating base pivots to match deck angles and protect flooring from damage. Ensures a snug, stable setup even on uneven surfaces while preventing slipping or movement. Adds flexibility, reduces setup time, and makes cover installation easier and more precise.. MADE IN THE USA BUILT FOR LONG-LASTING MARINE PERFORMANCE Vico Marine products are proudly manufactured in the United States using premium materials engineered for strength and reliability. Each component is quality-tested to deliver dependable results in demanding marine conditions year after year..

. Upgraded 32 diameter tripod base with tail bending design and adjustable screw feet provides solid support for your boat cover boat tarp furniture cover. Comes with a 10m rope to tie the pole in place, preventing movement during strong winds or storms. Designed to hold the cover steady even in harsh weather.. ? . Easily adjust the pole height from 22 to 49 inches using the snap-lock connection. Perfect for matching different boat depths and cover contours. Allows you to support the center or bow area of your boat cover to prevent water pooling.. . Made from 1.2mm thick steel thicker than typical 0.8mm poles, capable of withstanding over 200 lbs of pressure. Powder-coated finish resists rust and corrosion, having passed salt spray testing. Far more durable than plastic or thin aluminum alternatives.. - . Extra-large 5 mushroom cap made from premium ABS material prevents tearing or puncturing your boat cover. Features 3 built-in holes for threading the included 10m PE rope. Keeps the pole upright while you install the cover and maintains position through winter winds.. ? ?. Helps prevent debris and standing water from accumulating on your boat cover, extending the life of both your cover and boat. Any request will be responded to within 24 hours, please contact us if you have any questions..

Adjustable Height - The boat cover support pole is easy to telescopic, can adjust to any height from 20 to 44 to hold up covers. Twist and lock the height you need, will never fall easily, fit your boat cover perfectly and prevent water from pooling.. Durable Carbon Fiber Material - This pole of boat cover is made of carbon material, has a long service life. Cap and base made from tough ABS PVC, high strength, will not break or bend. Support your boat cover for countless days and nights. Stability Design - In order to prevent the support pole blew down by strong wind, we design 5 mushroom cap and 7.2 stable base, ensuring that the pole is always upright and won't fall over easily. Mushroom cap with 3 slits that can allow extra straps to provide stronger support.. Easy to Install And Remove - Adjustable boat cover poles with base and cap are easy to set up and remove, Just plug straight in and adjust the length of the pole. Please note in order to support 18-24ft boat cover, recommended to use at least 2 poles.. 100 Guarantee Satisfaction We offer 100 Guarantee Satisfaction and 12 months warranty. If you are not satisfied with this product or if you have any questions, please feel free to contact us.

QUALITY MATERIALThe pole of the boat cover support system is made of stainless steel that resists rust and sturdy won't bend or break. These boat cover pole are effective and sturdy support poles ,suitable for different sizes of boats.The stable base and mushroom top is made of sturdy ABS, high strength, not easy to deform,long useful life.. ADJUSTABLE HEIGHTThis heavy duty boat cover support poles with straps features 4 separated poles for extension, Height adjustable from 16 to 59, which can fit your boat cover perfectly.boat cover support is great accessories for motor boats,kayaks,pontoon boats,canoes,inflatable boat.. STABILITY DURABILYThis boat cover support poles for pontoon is made up of 5mushroom cap and 7 stable base,the wider base ensures that the pole is always upright and won't fall over easily, provides more stability and durabily, Can withstand the impact of strong winds and heavy rain. The cap features with 3 slits that can allow extra straps to provide stronger protection round base goes on the bottom of the pole as stand, prevent your boat cover from ripping and collapsing.. ADJUSTABLE STRAPSThis pontoon boat cover support poles set includes three 11.5 ft long strap, stainless steel hook at one end for quick release and length adjustmentThis high-quality adjustable strap has a firm design, with high density webbing technic and a sturdy sewing, flat structure with scattered stress points, and durable strong. boat support poles for cover can be used for multiple rainy seasons.. ELIMINATES WATER POOLINGThis boat cover support pole holds up boat covers and tarps made from canvas, plastic and more to prevent water from pooling and debris accumulating, It helps extend the life of your boat cover.works great as a pontoon cover support , boat tarp support , boat canvas pole support and boat cover poles.can also be used as outdoor patio furniture set covers support pole.outdoor grill griddle cover support pole, patio table cover support pole..

USA BASED, DESIGNED TESTED Our boat cover support pole features a higher quality telescoping poles adjust from 22 to 56 to hold up covers and tarps made from canvas or plastic and prevent water from pooling. We added features that others don't to develop the best boat support system for pontoon, bow riders, wake, ski, jon, and pleasure boats.. THE MOST CAP OPTIONS Our boat cover support pole system comes with a strong caps with hook and loop included. The stainless snaps are also installed removable for ease of use and accommodates various styles of covers. Use the snaps, the hook and loop patches, to optimize your pole fitment. It is easy to upgrade to our system.. THE BEST ALUMINUM POLES Our class leading pole is designed to withstand 100lbs of downward force Our boat cover poles are made from strong aluminum to prevent rust. They collapse to just 21 inches to fit compartments for storage. Our design has special ridged finger locks that are easier to use and stronger than others. They are great for deck boats, fishing, ski, paddle, and jon, bow rider boats.. THE MOST VERSATILE BASE Start with either the rubber boot base for small footprint or use the larger round pyramid base for more stability. Our base has a unique upgrade feature to enlarge the base into any material using the included stainless base screws.. STRAPS INCLUDED Unlike others, our pole sets include two 65 foot straps to improve the stability of the pole top keeping it upright while putting the cover on, or with high winter winds. Use multiple for larger pontoon boats, bowrider boats, or boat covers..

Stable Triangle BaseThe boat cover support pole is equipped with a foldable and adjustable triangular support base , which is more stable than other bases, and it is difficult to fall down even in stormy weather. The plastic protective feet of triangular support base, which can effectively protect your deck.. High QualityThe cover support rod system is made of stainless steel, which is rust proof, non-corrosive, durable, strong enough, and will not bend or break. The connecting part can be well reinforced and will not slide off easily. Its design allows your boat cover to be used for countless nights.. Adjustable HeightThe stainless steel pontoon boat cover support can be adjusted from 27 inch to 59 inch.You only need to twist and lock the required height to support the boat cover and tarpaulin made of canvas, plastic, etc. Prevent snow and rain accumulation during bad weather.. Easy to Install This pontoon support pole is composed of stainless steel rod, mushroom cap and triangle base. According to the installation instructions, you only need to connect and fix each part to complete the installation, which is very simple. The stem cover is suitable for most ships on the market.. Protect EffectivelyThe boat cover support system can support the sagging and collapse areas of the hull cover .Prevent rain and snow from accumulating and damaging the ship cover, so that rainwater can penetrate into the ship and corrode the ship body.If you have any doubt,please contact us at any time..

PREVENT WATER POOLINGFuprosico Upgraded Telescoping Boat Cover Support System consists of two boat cover support poles, 1 long connecting strap for two poles, and 23 straps for two pole tops. Two support poles firmly support the bow cover and stern cover respectively Up to 7 straps stay taut and support the entire cover, preventing your boat cover from sagging and collecting water.. EXCLUSIVE SUPPORT SYSTEM DESIGNThe three straps and weighted water bag on each support pole provide strong stability, effectively preventing the pole from tipping over The extra connection strap between the two support poles further improves the stability of the entire support system and supports the typical water build-up zone, so your boat won't turn into a large pool because of rain or snow weather.. TELESCOPIC BOAT COVER POLE STABLE BASEThe Boat Cover Support Poles for Pontoons is made of high-quality aluminum alloy. Selected aluminum alloy is strong enough to withstand storm or heavy rain without bending or breaking. Enhanced locking mode allows the boat cover support poles to be adjusted in any length from 22.6-58 to accommodate different size boats. 8Ib water weight bags provide additional stability to the rounded base.. ADJUSTABLE STRAPS STAINLESS STEEL HOOKSAdjustable straps with hook on one end for quick release and length adjustment This thickened strap features high density webbing technology and sturdy sewing, strong and durable. Hooks are made of high quality 201 stainless steel with silicone rubber cover at ends to prevent the boat being scratched, it can be easily hooked on the handrail or boat hook.. FUPROSICO PROMISEThe boat cover pole can support the boat cover's sagging and collapsing place and can protect your boat very well. We offer 12 months warranty. If you have any questions about the boat cover support pole or after-sales service, please feel free to contact us. Your boat parts are on Fuprosico Such as boat covers, floating key chains and boat cover straps..

Sandbags Provided to Greatly Improve Stability upgraded larger round base is 9 inches instead of 7 inch in diameter provides more stability and durabily, helps to hold the boat cover boat tarp furniture cover in harsh weather. In addition, we provide sandbags, so that the pole provides unprecedented stability experience. 8 ADJUSTABLE HEIGHTS Easy to achieve the height from 23 inch to 57 inch respectively with the push-button locking system. Better match the depth of the boat or the height you need to support the boat cover and furniture cover.. Durable Rustproof IRON Pole Nukugula iron support pole is 1.13 inch in diameter others are only 0.62inch, with a wall thickness of 1.2mm others are only 0.8mm, can withstand pressures of more than 300 pounds, and is much stronger and more durable than other plastic poles or aluminum poleEasy to bend and deformation The powder design iron Pole to prevent rust, passed salt spray test.. 3 Straps Provided For Your Need To Keep The Pole Upright The heavy duty 5 large mushroom cap features with 3 holes1.4inch long and 0.4inch wide for threading straps through and hold the boat pole cover upright while putting the cover on, or during high winter winds. The mushroom cap is made of high quality ABS material than others on the market to prevent tearing your cover, prolong the service life.. Easy to Use with Storage Bag This support pole can support any area under your boat cover,prevent deris and water build-up, helps maintain the lifetime of your boat. Any request will be responsed within 24 hours, please contact us if you have any questions..